From 68485695e5a84399da7b48b208ac42623fe22963 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sun, 8 Jul 2007 23:39:14 +0200 Subject: [CPUFREQ] the overdue removal of X86_SPEEDSTEP_CENTRINO_ACPI This patch contains the overdue removal of X86_SPEEDSTEP_CENTRINO_ACPI. Signed-off-by: Adrian Bunk Acked-by: Venkatesh Pallipadi Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/Kconfig | 18 +- arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c | 276 ++-------------------- 2 files changed, 18 insertions(+), 276 deletions(-) (limited to 'arch/i386') diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig index e77754c..094118b 100644 --- a/arch/i386/kernel/cpu/cpufreq/Kconfig +++ b/arch/i386/kernel/cpu/cpufreq/Kconfig @@ -116,7 +116,7 @@ config X86_GX_SUSPMOD config X86_SPEEDSTEP_CENTRINO tristate "Intel Enhanced SpeedStep" select CPU_FREQ_TABLE - select X86_SPEEDSTEP_CENTRINO_TABLE if (!X86_SPEEDSTEP_CENTRINO_ACPI) + select X86_SPEEDSTEP_CENTRINO_TABLE help This adds the CPUFreq driver for Enhanced SpeedStep enabled mobile CPUs. This means Intel Pentium M (Centrino) CPUs. However, @@ -128,20 +128,6 @@ config X86_SPEEDSTEP_CENTRINO If in doubt, say N. -config X86_SPEEDSTEP_CENTRINO_ACPI - bool "Use ACPI tables to decode valid frequency/voltage (deprecated)" - depends on X86_SPEEDSTEP_CENTRINO && ACPI_PROCESSOR - depends on !(X86_SPEEDSTEP_CENTRINO = y && ACPI_PROCESSOR = m) - help - This is deprecated and this functionality is now merged into - acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of - speedstep_centrino. - Use primarily the information provided in the BIOS ACPI tables - to determine valid CPU frequency and voltage pairings. It is - required for the driver to work on non-Banias CPUs. - - If in doubt, say Y. - config X86_SPEEDSTEP_CENTRINO_TABLE bool "Built-in tables for Banias CPUs" depends on X86_SPEEDSTEP_CENTRINO @@ -237,7 +223,7 @@ comment "shared options" config X86_ACPI_CPUFREQ_PROC_INTF bool "/proc/acpi/processor/../performance interface (deprecated)" depends on PROC_FS - depends on X86_ACPI_CPUFREQ || X86_SPEEDSTEP_CENTRINO_ACPI || X86_POWERNOW_K7_ACPI || X86_POWERNOW_K8_ACPI + depends on X86_ACPI_CPUFREQ || X86_POWERNOW_K7_ACPI || X86_POWERNOW_K8_ACPI help This enables the deprecated /proc/acpi/processor/../performance interface. While it is helpful for debugging, the generic, diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c index 35489fd..6c5dc2c8 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c @@ -21,12 +21,6 @@ #include #include -#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI -#include -#include -#include -#endif - #include #include #include @@ -257,9 +251,7 @@ static int centrino_cpu_init_table(struct cpufreq_policy *policy) /* Matched a non-match */ dprintk("no table support for CPU model \"%s\"\n", cpu->x86_model_id); -#ifndef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI - dprintk("try compiling with CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI enabled\n"); -#endif + dprintk("try using the acpi-cpufreq driver\n"); return -ENOENT; } @@ -346,213 +338,6 @@ static unsigned int get_cur_freq(unsigned int cpu) } -#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI - -static struct acpi_processor_performance *acpi_perf_data[NR_CPUS]; - -/* - * centrino_cpu_early_init_acpi - Do the preregistering with ACPI P-States - * library - * - * Before doing the actual init, we need to do _PSD related setup whenever - * supported by the BIOS. These are handled by this early_init routine. - */ -static int centrino_cpu_early_init_acpi(void) -{ - unsigned int i, j; - struct acpi_processor_performance *data; - - for_each_possible_cpu(i) { - data = kzalloc(sizeof(struct acpi_processor_performance), - GFP_KERNEL); - if (!data) { - for_each_possible_cpu(j) { - kfree(acpi_perf_data[j]); - acpi_perf_data[j] = NULL; - } - return (-ENOMEM); - } - acpi_perf_data[i] = data; - } - - acpi_processor_preregister_performance(acpi_perf_data); - return 0; -} - - -#ifdef CONFIG_SMP -/* - * Some BIOSes do SW_ANY coordination internally, either set it up in hw - * or do it in BIOS firmware and won't inform about it to OS. If not - * detected, this has a side effect of making CPU run at a different speed - * than OS intended it to run at. Detect it and handle it cleanly. - */ -static int bios_with_sw_any_bug; -static int sw_any_bug_found(struct dmi_system_id *d) -{ - bios_with_sw_any_bug = 1; - return 0; -} - -static struct dmi_system_id sw_any_bug_dmi_table[] = { - { - .callback = sw_any_bug_found, - .ident = "Supermicro Server X6DLP", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"), - DMI_MATCH(DMI_BIOS_VERSION, "080010"), - DMI_MATCH(DMI_PRODUCT_NAME, "X6DLP"), - }, - }, - { } -}; -#endif - -/* - * centrino_cpu_init_acpi - register with ACPI P-States library - * - * Register with the ACPI P-States library (part of drivers/acpi/processor.c) - * in order to determine correct frequency and voltage pairings by reading - * the _PSS of the ACPI DSDT or SSDT tables. - */ -static int centrino_cpu_init_acpi(struct cpufreq_policy *policy) -{ - unsigned long cur_freq; - int result = 0, i; - unsigned int cpu = policy->cpu; - struct acpi_processor_performance *p; - - p = acpi_perf_data[cpu]; - - /* register with ACPI core */ - if (acpi_processor_register_performance(p, cpu)) { - dprintk(PFX "obtaining ACPI data failed\n"); - return -EIO; - } - - policy->shared_type = p->shared_type; - /* - * Will let policy->cpus know about dependency only when software - * coordination is required. - */ - if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL || - policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) { - policy->cpus = p->shared_cpu_map; - } - -#ifdef CONFIG_SMP - dmi_check_system(sw_any_bug_dmi_table); - if (bios_with_sw_any_bug && cpus_weight(policy->cpus) == 1) { - policy->shared_type = CPUFREQ_SHARED_TYPE_ALL; - policy->cpus = cpu_core_map[cpu]; - } -#endif - - /* verify the acpi_data */ - if (p->state_count <= 1) { - dprintk("No P-States\n"); - result = -ENODEV; - goto err_unreg; - } - - if ((p->control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) || - (p->status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) { - dprintk("Invalid control/status registers (%x - %x)\n", - p->control_register.space_id, p->status_register.space_id); - result = -EIO; - goto err_unreg; - } - - for (i=0; istate_count; i++) { - if ((p->states[i].control & INTEL_MSR_RANGE) != - (p->states[i].status & INTEL_MSR_RANGE)) { - dprintk("Different MSR bits in control (%llu) and status (%llu)\n", - p->states[i].control, p->states[i].status); - result = -EINVAL; - goto err_unreg; - } - - if (!p->states[i].core_frequency) { - dprintk("Zero core frequency for state %u\n", i); - result = -EINVAL; - goto err_unreg; - } - - if (p->states[i].core_frequency > p->states[0].core_frequency) { - dprintk("P%u has larger frequency (%llu) than P0 (%llu), skipping\n", i, - p->states[i].core_frequency, p->states[0].core_frequency); - p->states[i].core_frequency = 0; - continue; - } - } - - centrino_model[cpu] = kzalloc(sizeof(struct cpu_model), GFP_KERNEL); - if (!centrino_model[cpu]) { - result = -ENOMEM; - goto err_unreg; - } - - centrino_model[cpu]->model_name=NULL; - centrino_model[cpu]->max_freq = p->states[0].core_frequency * 1000; - centrino_model[cpu]->op_points = kmalloc(sizeof(struct cpufreq_frequency_table) * - (p->state_count + 1), GFP_KERNEL); - if (!centrino_model[cpu]->op_points) { - result = -ENOMEM; - goto err_kfree; - } - - for (i=0; istate_count; i++) { - centrino_model[cpu]->op_points[i].index = p->states[i].control & INTEL_MSR_RANGE; - centrino_model[cpu]->op_points[i].frequency = p->states[i].core_frequency * 1000; - dprintk("adding state %i with frequency %u and control value %04x\n", - i, centrino_model[cpu]->op_points[i].frequency, centrino_model[cpu]->op_points[i].index); - } - centrino_model[cpu]->op_points[p->state_count].frequency = CPUFREQ_TABLE_END; - - cur_freq = get_cur_freq(cpu); - - for (i=0; istate_count; i++) { - if (!p->states[i].core_frequency) { - dprintk("skipping state %u\n", i); - centrino_model[cpu]->op_points[i].frequency = CPUFREQ_ENTRY_INVALID; - continue; - } - - if (extract_clock(centrino_model[cpu]->op_points[i].index, cpu, 0) != - (centrino_model[cpu]->op_points[i].frequency)) { - dprintk("Invalid encoded frequency (%u vs. %u)\n", - extract_clock(centrino_model[cpu]->op_points[i].index, cpu, 0), - centrino_model[cpu]->op_points[i].frequency); - result = -EINVAL; - goto err_kfree_all; - } - - if (cur_freq == centrino_model[cpu]->op_points[i].frequency) - p->state = i; - } - - /* notify BIOS that we exist */ - acpi_processor_notify_smm(THIS_MODULE); - printk("speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI " - "config is deprecated.\n " - "Use X86_ACPI_CPUFREQ (acpi-cpufreq) instead.\n" ); - - return 0; - - err_kfree_all: - kfree(centrino_model[cpu]->op_points); - err_kfree: - kfree(centrino_model[cpu]); - err_unreg: - acpi_processor_unregister_performance(p, cpu); - dprintk(PFX "invalid ACPI data\n"); - return (result); -} -#else -static inline int centrino_cpu_init_acpi(struct cpufreq_policy *policy) { return -ENODEV; } -static inline int centrino_cpu_early_init_acpi(void) { return 0; } -#endif - static int centrino_cpu_init(struct cpufreq_policy *policy) { struct cpuinfo_x86 *cpu = &cpu_data[policy->cpu]; @@ -568,27 +353,25 @@ static int centrino_cpu_init(struct cpufreq_policy *policy) if (cpu_has(cpu, X86_FEATURE_CONSTANT_TSC)) centrino_driver.flags |= CPUFREQ_CONST_LOOPS; - if (centrino_cpu_init_acpi(policy)) { - if (policy->cpu != 0) - return -ENODEV; + if (policy->cpu != 0) + return -ENODEV; - for (i = 0; i < N_IDS; i++) - if (centrino_verify_cpu_id(cpu, &cpu_ids[i])) - break; + for (i = 0; i < N_IDS; i++) + if (centrino_verify_cpu_id(cpu, &cpu_ids[i])) + break; - if (i != N_IDS) - centrino_cpu[policy->cpu] = &cpu_ids[i]; + if (i != N_IDS) + centrino_cpu[policy->cpu] = &cpu_ids[i]; - if (!centrino_cpu[policy->cpu]) { - dprintk("found unsupported CPU with " - "Enhanced SpeedStep: send /proc/cpuinfo to " - MAINTAINER "\n"); - return -ENODEV; - } + if (!centrino_cpu[policy->cpu]) { + dprintk("found unsupported CPU with " + "Enhanced SpeedStep: send /proc/cpuinfo to " + MAINTAINER "\n"); + return -ENODEV; + } - if (centrino_cpu_init_table(policy)) { - return -ENODEV; - } + if (centrino_cpu_init_table(policy)) { + return -ENODEV; } /* Check to see if Enhanced SpeedStep is enabled, and try to @@ -634,20 +417,6 @@ static int centrino_cpu_exit(struct cpufreq_policy *policy) cpufreq_frequency_table_put_attr(cpu); -#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI - if (!centrino_model[cpu]->model_name) { - static struct acpi_processor_performance *p; - - if (acpi_perf_data[cpu]) { - p = acpi_perf_data[cpu]; - dprintk("unregistering and freeing ACPI data\n"); - acpi_processor_unregister_performance(p, cpu); - kfree(centrino_model[cpu]->op_points); - kfree(centrino_model[cpu]); - } - } -#endif - centrino_model[cpu] = NULL; return 0; @@ -849,25 +618,12 @@ static int __init centrino_init(void) if (!cpu_has(cpu, X86_FEATURE_EST)) return -ENODEV; - centrino_cpu_early_init_acpi(); - return cpufreq_register_driver(¢rino_driver); } static void __exit centrino_exit(void) { -#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI - unsigned int j; -#endif - cpufreq_unregister_driver(¢rino_driver); - -#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI - for_each_possible_cpu(j) { - kfree(acpi_perf_data[j]); - acpi_perf_data[j] = NULL; - } -#endif } MODULE_AUTHOR ("Jeremy Fitzhardinge "); -- cgit v1.1