From 9e3f544d792fd2ff7e31ca4a72e5194f1491ed14 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Wed, 20 Aug 2008 15:46:24 +0200 Subject: avr32: Fix lockup after Java stack underflow in user mode When using the Java Extension Module hardware, a Java stack underflow or overflow trap may cause the system to enter an infinite exception loop. Although there's no kernel support for the Java hardware yet, we need to be able to recover from this situation and keep the system running. This patch adds code to detect and fixup this situation in the critical exception handler and terminate the faulting process. We may have to rethink how to handle this more gracefully when the necessary kernel support for hardware-accelerated Java is added. Reported-by: Guennadi Liakhovetski Signed-off-by: Haavard Skinnemoen --- arch/avr32/kernel/asm-offsets.c | 6 ++++ arch/avr32/kernel/entry-avr32b.S | 59 ++++++++++++++++++++++++++++++++++++++-- 2 files changed, 63 insertions(+), 2 deletions(-) (limited to 'arch/avr32') diff --git a/arch/avr32/kernel/asm-offsets.c b/arch/avr32/kernel/asm-offsets.c index e4796c6..d6a8193 100644 --- a/arch/avr32/kernel/asm-offsets.c +++ b/arch/avr32/kernel/asm-offsets.c @@ -4,6 +4,8 @@ * to extract and format the required data. */ +#include +#include #include #include @@ -17,4 +19,8 @@ void foo(void) OFFSET(TI_rar_saved, thread_info, rar_saved); OFFSET(TI_rsr_saved, thread_info, rsr_saved); OFFSET(TI_restart_block, thread_info, restart_block); + BLANK(); + OFFSET(TSK_active_mm, task_struct, active_mm); + BLANK(); + OFFSET(MM_pgd, mm_struct, pgd); } diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S index 2b398ca..33d4937 100644 --- a/arch/avr32/kernel/entry-avr32b.S +++ b/arch/avr32/kernel/entry-avr32b.S @@ -334,9 +334,64 @@ save_full_context_ex: /* Low-level exception handlers */ handle_critical: + /* + * AT32AP700x errata: + * + * After a Java stack overflow or underflow trap, any CPU + * memory access may cause erratic behavior. This will happen + * when the four least significant bits of the JOSP system + * register contains any value between 9 and 15 (inclusive). + * + * Possible workarounds: + * - Don't use the Java Extension Module + * - Ensure that the stack overflow and underflow trap + * handlers do not do any memory access or trigger any + * exceptions before the overflow/underflow condition is + * cleared (by incrementing or decrementing the JOSP) + * - Make sure that JOSP does not contain any problematic + * value before doing any exception or interrupt + * processing. + * - Set up a critical exception handler which writes a + * known-to-be-safe value, e.g. 4, to JOSP before doing + * any further processing. + * + * We'll use the last workaround for now since we cannot + * guarantee that user space processes don't use Java mode. + * Non-well-behaving userland will be terminated with extreme + * prejudice. + */ +#ifdef CONFIG_CPU_AT32AP700X + /* + * There's a chance we can't touch memory, so temporarily + * borrow PTBR to save the stack pointer while we fix things + * up... + */ + mtsr SYSREG_PTBR, sp + mov sp, 4 + mtsr SYSREG_JOSP, sp + mfsr sp, SYSREG_PTBR + sub pc, -2 + + /* Push most of pt_regs on stack. We'll do the rest later */ sub sp, 4 - stmts --sp, r0-lr - rcall save_full_context_ex + pushm r0-r12 + + /* PTBR mirrors current_thread_info()->task->active_mm->pgd */ + get_thread_info r0 + ld.w r1, r0[TI_task] + ld.w r2, r1[TSK_active_mm] + ld.w r3, r2[MM_pgd] + mtsr SYSREG_PTBR, r3 +#else + sub sp, 4 + pushm r0-r12 +#endif + sub r0, sp, -(14 * 4) + mov r1, lr + mfsr r2, SYSREG_RAR_EX + mfsr r3, SYSREG_RSR_EX + pushm r0-r3 + mfsr r12, SYSREG_ECR mov r11, sp rcall do_critical_exception -- cgit v1.1 From 84c4f2f21a8e6e6d4bdfff95bf5ddc7925df4e01 Mon Sep 17 00:00:00 2001 From: Humphrey Bucknell Date: Fri, 29 Aug 2008 16:27:00 +0100 Subject: avr32: pm_standby low-power ram bug fix The value stored into the SDRAMC LPR register should be the current value of the register with the Self-refresh value set in the lower bit field. The bug involved only the Self-refresh value being written to the register, thus over writing any low-power ram settings. Signed-off-by: Humphrey Bucknell Signed-off-by: Haavard Skinnemoen --- arch/avr32/mach-at32ap/pm-at32ap700x.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/avr32') diff --git a/arch/avr32/mach-at32ap/pm-at32ap700x.S b/arch/avr32/mach-at32ap/pm-at32ap700x.S index 5be4de6..17503b0 100644 --- a/arch/avr32/mach-at32ap/pm-at32ap700x.S +++ b/arch/avr32/mach-at32ap/pm-at32ap700x.S @@ -134,7 +134,7 @@ pm_standby: mov r11, SDRAMC_LPR_LPCB_SELF_RFR bfins r10, r11, 0, 2 /* LPCB <- self Refresh */ sync 0 /* flush write buffer */ - st.w r12[SDRAMC_LPR], r11 /* put SDRAM in self-refresh mode */ + st.w r12[SDRAMC_LPR], r10 /* put SDRAM in self-refresh mode */ ld.w r11, r12[SDRAMC_LPR] unmask_interrupts sleep CPU_SLEEP_FROZEN -- cgit v1.1 From 7fb61a7b6f9111245867fa2bce47949f4298d430 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Fri, 19 Sep 2008 17:56:54 +0200 Subject: atstk1000: fix build breakage with BOARD_ATSTK100X_SW2_CUSTOM=y The #ifdef surrounding the code adding the mmc controller had a typo, causing it to be compiled even when mmc was supposed to be disabled. Signed-off-by: Haavard Skinnemoen --- arch/avr32/boards/atstk1000/atstk1002.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/avr32') diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index ee4c292..dfc3443 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -325,7 +325,7 @@ static int __init atstk1002_init(void) #ifdef CONFIG_BOARD_ATSTK100X_SPI1 at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); #endif -#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM +#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM at32_add_device_mci(0, MCI_PDATA); #endif #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM -- cgit v1.1 From 1b771c12b56fdea6c0596a69c63b097b62ce9f41 Mon Sep 17 00:00:00 2001 From: Markus Heidelberg Date: Mon, 8 Sep 2008 00:22:45 +0200 Subject: avr32: add .gitignore files Ignore Kernel binaries, kernel/vmlinux.lds and a log file. Signed-off-by: Markus Heidelberg Signed-off-by: Haavard Skinnemoen --- arch/avr32/boot/images/.gitignore | 4 ++++ arch/avr32/kernel/.gitignore | 1 + 2 files changed, 5 insertions(+) create mode 100644 arch/avr32/boot/images/.gitignore create mode 100644 arch/avr32/kernel/.gitignore (limited to 'arch/avr32') diff --git a/arch/avr32/boot/images/.gitignore b/arch/avr32/boot/images/.gitignore new file mode 100644 index 0000000..64ea9d0 --- /dev/null +++ b/arch/avr32/boot/images/.gitignore @@ -0,0 +1,4 @@ +uImage +uImage.srec +vmlinux.cso +sfdwarf.log diff --git a/arch/avr32/kernel/.gitignore b/arch/avr32/kernel/.gitignore new file mode 100644 index 0000000..c5f676c --- /dev/null +++ b/arch/avr32/kernel/.gitignore @@ -0,0 +1 @@ +vmlinux.lds -- cgit v1.1 From e37925ebdb9738fc7968119198c6997e79093c02 Mon Sep 17 00:00:00 2001 From: Hans-Christian Egtvedt Date: Wed, 10 Sep 2008 15:52:04 +0200 Subject: avr32: add generic_find_next_le_bit bit function This patch implements the generic_find_next_le_bit bit function for AVR32 architecture. This is used by EXT4 file system. Signed-off-by: Hans-Christian Egtvedt Signed-off-by: Haavard Skinnemoen --- arch/avr32/kernel/avr32_ksyms.c | 1 + arch/avr32/lib/findbit.S | 30 ++++++++++++++++++++++++++++++ 2 files changed, 31 insertions(+) (limited to 'arch/avr32') diff --git a/arch/avr32/kernel/avr32_ksyms.c b/arch/avr32/kernel/avr32_ksyms.c index 84a7d44..11e310c 100644 --- a/arch/avr32/kernel/avr32_ksyms.c +++ b/arch/avr32/kernel/avr32_ksyms.c @@ -58,6 +58,7 @@ EXPORT_SYMBOL(find_first_zero_bit); EXPORT_SYMBOL(find_next_zero_bit); EXPORT_SYMBOL(find_first_bit); EXPORT_SYMBOL(find_next_bit); +EXPORT_SYMBOL(generic_find_next_le_bit); EXPORT_SYMBOL(generic_find_next_zero_le_bit); /* I/O primitives (lib/io-*.S) */ diff --git a/arch/avr32/lib/findbit.S b/arch/avr32/lib/findbit.S index c6b91de..997b33b 100644 --- a/arch/avr32/lib/findbit.S +++ b/arch/avr32/lib/findbit.S @@ -123,6 +123,36 @@ ENTRY(find_next_bit) brgt 1b retal r11 +ENTRY(generic_find_next_le_bit) + lsr r8, r10, 5 + sub r9, r11, r10 + retle r11 + + lsl r8, 2 + add r12, r8 + andl r10, 31, COH + breq 1f + + /* offset is not word-aligned. Handle the first (32 - r10) bits */ + ldswp.w r8, r12[0] + sub r12, -4 + lsr r8, r8, r10 + brne .L_found + + /* r9 = r9 - (32 - r10) = r9 + r10 - 32 */ + add r9, r10 + sub r9, 32 + retle r11 + + /* Main loop. offset must be word-aligned */ +1: ldswp.w r8, r12[0] + cp.w r8, 0 + brne .L_found + sub r12, -4 + sub r9, 32 + brgt 1b + retal r11 + ENTRY(generic_find_next_zero_le_bit) lsr r8, r10, 5 sub r9, r11, r10 -- cgit v1.1 From 73d4393d1df4ff3892b040396f101ede94e9e846 Mon Sep 17 00:00:00 2001 From: Hans-Christian Egtvedt Date: Wed, 17 Sep 2008 13:39:45 +0200 Subject: avr32: fix sys_sync_file_range() call convention On AVR32, all parameters beyond the 5th are passed on the stack. System calls don't use the stack -- they borrow a callee-saved register instead. This means that syscalls that take 6 parameters must be called through a stub that pushes the last parameter on the stack. This patch adds a stub for sync_file_range syscall on AVR32 architecture. Tested with uClibc snapshot. Signed-off-by: Hans-Christian Egtvedt Signed-off-by: Haavard Skinnemoen --- arch/avr32/kernel/syscall-stubs.S | 9 +++++++++ arch/avr32/kernel/syscall_table.S | 2 +- 2 files changed, 10 insertions(+), 1 deletion(-) (limited to 'arch/avr32') diff --git a/arch/avr32/kernel/syscall-stubs.S b/arch/avr32/kernel/syscall-stubs.S index 890286a..673178e 100644 --- a/arch/avr32/kernel/syscall-stubs.S +++ b/arch/avr32/kernel/syscall-stubs.S @@ -109,3 +109,12 @@ __sys_epoll_pwait: rcall sys_epoll_pwait sub sp, -4 popm pc + + .global __sys_sync_file_range + .type __sys_sync_file_range,@function +__sys_sync_file_range: + pushm lr + st.w --sp, ARG6 + rcall sys_sync_file_range + sub sp, -4 + popm pc diff --git a/arch/avr32/kernel/syscall_table.S b/arch/avr32/kernel/syscall_table.S index 478bda4..7ee0057 100644 --- a/arch/avr32/kernel/syscall_table.S +++ b/arch/avr32/kernel/syscall_table.S @@ -275,7 +275,7 @@ sys_call_table: .long sys_set_robust_list .long sys_get_robust_list /* 260 */ .long __sys_splice - .long sys_sync_file_range + .long __sys_sync_file_range .long sys_tee .long sys_vmsplice .long __sys_epoll_pwait /* 265 */ -- cgit v1.1 From 3d431a742728e6b619ce57a030a92d228c13d1d2 Mon Sep 17 00:00:00 2001 From: Manfred Spraul Date: Wed, 20 Aug 2008 15:39:59 +0200 Subject: avr32: nmi_enter() without nmi_exit() While updating the rcu code, I noticed that do_nmi() for AVR32 is odd: There is an nmi_enter() call without an nmi_exit(). This can't be correct, it breaks rcu (at least the preempt version) and lockdep. [haavard.skinnemoen@atmel.com: fixed another case that returned directly] Signed-off-by: Haavard Skinnemoen --- arch/avr32/kernel/traps.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/avr32') diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c index b835c4c..0d98737 100644 --- a/arch/avr32/kernel/traps.c +++ b/arch/avr32/kernel/traps.c @@ -116,15 +116,15 @@ asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs) switch (ret) { case NOTIFY_OK: case NOTIFY_STOP: - return; + break; case NOTIFY_BAD: die("Fatal Non-Maskable Interrupt", regs, SIGINT); default: + printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n"); + nmi_disable(); break; } - - printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n"); - nmi_disable(); + nmi_exit(); } asmlinkage void do_critical_exception(unsigned long ecr, struct pt_regs *regs) -- cgit v1.1 From f3c450be7b0defab59e360eca8a7e201d424d526 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Tue, 12 Aug 2008 17:26:35 -0700 Subject: avr32: use the new byteorder headers Signed-off-by: Harvey Harrison [haavard.skinnemoen@atmel.com: fix build breakage] Signed-off-by: Haavard Skinnemoen --- arch/avr32/include/asm/byteorder.h | 22 ++++++++++++++-------- arch/avr32/mach-at32ap/include/mach/io.h | 3 +-- 2 files changed, 15 insertions(+), 10 deletions(-) (limited to 'arch/avr32') diff --git a/arch/avr32/include/asm/byteorder.h b/arch/avr32/include/asm/byteorder.h index d77b48b..8e3af02 100644 --- a/arch/avr32/include/asm/byteorder.h +++ b/arch/avr32/include/asm/byteorder.h @@ -7,6 +7,9 @@ #include #include +#define __BIG_ENDIAN +#define __SWAB_64_THRU_32__ + #ifdef __CHECKER__ extern unsigned long __builtin_bswap_32(unsigned long x); extern unsigned short __builtin_bswap_16(unsigned short x); @@ -17,15 +20,18 @@ extern unsigned short __builtin_bswap_16(unsigned short x); * the result. */ #if !(__GNUC__ == 4 && __GNUC_MINOR__ < 2) -#define __arch__swab32(x) __builtin_bswap_32(x) -#define __arch__swab16(x) __builtin_bswap_16(x) -#endif +static inline __attribute_const__ __u16 __arch_swab16(__u16 val) +{ + return __builtin_bswap_16(val); +} +#define __arch_swab16 __arch_swab16 -#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __BYTEORDER_HAS_U64__ -# define __SWAB_64_THRU_32__ +static inline __attribute_const__ __u32 __arch_swab32(__u32 val) +{ + return __builtin_bswap_32(val); +} +#define __arch_swab32 __arch_swab32 #endif -#include - +#include #endif /* __ASM_AVR32_BYTEORDER_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/io.h b/arch/avr32/mach-at32ap/include/mach/io.h index 4ec6abc..22ea79b 100644 --- a/arch/avr32/mach-at32ap/include/mach/io.h +++ b/arch/avr32/mach-at32ap/include/mach/io.h @@ -1,8 +1,7 @@ #ifndef __ASM_AVR32_ARCH_AT32AP_IO_H #define __ASM_AVR32_ARCH_AT32AP_IO_H -/* For "bizarre" halfword swapping */ -#include +#include #if defined(CONFIG_AP700X_32_BIT_SMC) # define __swizzle_addr_b(addr) (addr ^ 3UL) -- cgit v1.1 From 3d256151471ba9fd60a5b896a706eb21a6b1cea1 Mon Sep 17 00:00:00 2001 From: Nikolaus Voss Date: Wed, 3 Sep 2008 12:50:32 +0200 Subject: Add kernel support for oprofile callgraphs on AVR32 This patch adds backtracing capability to oprofile profiling in kernel and user mode on AVR32. This is done by going through the frames on the stack and adding oprofile traces for all return addresses. The code being profiled has to be compiled with frame pointers to make this work. Signed-off-by: Nikolaus Voss Signed-off-by: Haavard Skinnemoen --- arch/avr32/oprofile/Makefile | 2 +- arch/avr32/oprofile/backtrace.c | 81 ++++++++++++++++++++++++++++++++++++ arch/avr32/oprofile/op_model_avr32.c | 4 ++ 3 files changed, 86 insertions(+), 1 deletion(-) create mode 100644 arch/avr32/oprofile/backtrace.c (limited to 'arch/avr32') diff --git a/arch/avr32/oprofile/Makefile b/arch/avr32/oprofile/Makefile index 1fe81c3..e0eb520 100644 --- a/arch/avr32/oprofile/Makefile +++ b/arch/avr32/oprofile/Makefile @@ -5,4 +5,4 @@ oprofile-y := $(addprefix ../../../drivers/oprofile/, \ event_buffer.o oprofile_files.o \ oprofilefs.o oprofile_stats.o \ timer_int.o) -oprofile-y += op_model_avr32.o +oprofile-y += op_model_avr32.o backtrace.o diff --git a/arch/avr32/oprofile/backtrace.c b/arch/avr32/oprofile/backtrace.c new file mode 100644 index 0000000..75d9ad6 --- /dev/null +++ b/arch/avr32/oprofile/backtrace.c @@ -0,0 +1,81 @@ +/* + * AVR32 specific backtracing code for oprofile + * + * Copyright 2008 Weinmann GmbH + * + * Author: Nikolaus Voss + * + * Based on i386 oprofile backtrace code by John Levon and David Smith + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include + +/* The first two words of each frame on the stack look like this if we have + * frame pointers */ +struct frame_head { + unsigned long lr; + struct frame_head *fp; +}; + +/* copied from arch/avr32/kernel/process.c */ +static inline int valid_stack_ptr(struct thread_info *tinfo, unsigned long p) +{ + return (p > (unsigned long)tinfo) + && (p < (unsigned long)tinfo + THREAD_SIZE - 3); +} + +/* copied from arch/x86/oprofile/backtrace.c */ +static struct frame_head *dump_user_backtrace(struct frame_head *head) +{ + struct frame_head bufhead[2]; + + /* Also check accessibility of one struct frame_head beyond */ + if (!access_ok(VERIFY_READ, head, sizeof(bufhead))) + return NULL; + if (__copy_from_user_inatomic(bufhead, head, sizeof(bufhead))) + return NULL; + + oprofile_add_trace(bufhead[0].lr); + + /* frame pointers should strictly progress back up the stack + * (towards higher addresses) */ + if (bufhead[0].fp <= head) + return NULL; + + return bufhead[0].fp; +} + +void avr32_backtrace(struct pt_regs * const regs, unsigned int depth) +{ + /* Get first frame pointer */ + struct frame_head *head = (struct frame_head *)(regs->r7); + + if (!user_mode(regs)) { +#ifdef CONFIG_FRAME_POINTER + /* + * Traverse the kernel stack from frame to frame up to + * "depth" steps. + */ + while (depth-- && valid_stack_ptr(task_thread_info(current), + (unsigned long)head)) { + oprofile_add_trace(head->lr); + if (head->fp <= head) + break; + head = head->fp; + } +#endif + } else { + /* Assume we have frame pointers in user mode process */ + while (depth-- && head) + head = dump_user_backtrace(head); + } +} + + diff --git a/arch/avr32/oprofile/op_model_avr32.c b/arch/avr32/oprofile/op_model_avr32.c index df42325..a3e9b3c 100644 --- a/arch/avr32/oprofile/op_model_avr32.c +++ b/arch/avr32/oprofile/op_model_avr32.c @@ -22,6 +22,8 @@ #define AVR32_PERFCTR_IRQ_GROUP 0 #define AVR32_PERFCTR_IRQ_LINE 1 +void avr32_backtrace(struct pt_regs * const regs, unsigned int depth); + enum { PCCNT, PCNT0, PCNT1, NR_counter }; struct avr32_perf_counter { @@ -223,6 +225,8 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) memcpy(ops, &avr32_perf_counter_ops, sizeof(struct oprofile_operations)); + ops->backtrace = avr32_backtrace; + printk(KERN_INFO "oprofile: using AVR32 performance monitoring.\n"); return 0; -- cgit v1.1 From 48c1fd3882286fd9e978ca8725013f2e060b700e Mon Sep 17 00:00:00 2001 From: Marco Stornelli Date: Tue, 16 Sep 2008 09:14:03 +0200 Subject: avr32: added mem kernel command line option support Signed-off-by: Marco Stornelli Signed-off-by: Haavard Skinnemoen --- arch/avr32/kernel/setup.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'arch/avr32') diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c index d8e623c..5c70839 100644 --- a/arch/avr32/kernel/setup.c +++ b/arch/avr32/kernel/setup.c @@ -283,6 +283,25 @@ static int __init early_parse_fbmem(char *p) } early_param("fbmem", early_parse_fbmem); +/* + * Pick out the memory size. We look for mem=size@start, + * where start and size are "size[KkMmGg]" + */ +static int __init early_mem(char *p) +{ + resource_size_t size, start; + + start = system_ram->start; + size = memparse(p, &p); + if (*p == '@') + start = memparse(p + 1, &p); + + system_ram->start = start; + system_ram->end = system_ram->start + size - 1; + return 0; +} +early_param("mem", early_mem); + static int __init parse_tag_core(struct tag *tag) { if (tag->hdr.size > 2) { -- cgit v1.1 From 7066412488281fd1c201dceb22a0dfe467012f76 Mon Sep 17 00:00:00 2001 From: Julien May Date: Mon, 4 Aug 2008 14:27:38 +0200 Subject: avr32: Allow fine-grained control over LCDC pins This replaces the pin_config param with an u64 pin_mask in at32_add_device_lcdc, allowing a board-maintainer to indivually select specific lcdc pins. Signed-off-by: Alex Raimondi Signed-off-by: Julien May Signed-off-by: Haavard Skinnemoen --- arch/avr32/boards/atstk1000/atstk1002.c | 3 +- arch/avr32/boards/atstk1000/atstk1004.c | 3 +- arch/avr32/mach-at32ap/at32ap700x.c | 95 +++++------------ arch/avr32/mach-at32ap/include/mach/at32ap700x.h | 128 +++++++++++++++++++++++ arch/avr32/mach-at32ap/include/mach/board.h | 2 +- 5 files changed, 158 insertions(+), 73 deletions(-) (limited to 'arch/avr32') diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index dfc3443..cccca24 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -332,7 +332,8 @@ static int __init atstk1002_init(void) set_hw_addr(at32_add_device_eth(1, ð_data[1])); #else at32_add_device_lcdc(0, &atstk1000_lcdc_data, - fbmem_start, fbmem_size, 0); + fbmem_start, fbmem_size, + ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL); #endif at32_add_device_usba(0, NULL); #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c index 50a5273..2c072cd 100644 --- a/arch/avr32/boards/atstk1000/atstk1004.c +++ b/arch/avr32/boards/atstk1000/atstk1004.c @@ -140,7 +140,8 @@ static int __init atstk1004_init(void) at32_add_device_mci(0, NULL); #endif at32_add_device_lcdc(0, &atstk1000_lcdc_data, - fbmem_start, fbmem_size, 0); + fbmem_start, fbmem_size, + ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL); at32_add_device_usba(0, NULL); #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM at32_add_device_ssc(0, ATMEL_SSC_TX); diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index e01dbe4..c28dd17 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -1353,13 +1353,14 @@ static struct clk atmel_lcdfb0_pixclk = { struct platform_device *__init at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data, unsigned long fbmem_start, unsigned long fbmem_len, - unsigned int pin_config) + u64 pin_mask) { struct platform_device *pdev; struct atmel_lcdfb_info *info; struct fb_monspecs *monspecs; struct fb_videomode *modedb; unsigned int modedb_size; + int i; /* * Do a deep copy of the fb data, monspecs and modedb. Make @@ -1381,75 +1382,29 @@ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data, case 0: pdev = &atmel_lcdfb0_device; - switch (pin_config) { - case 0: - select_peripheral(PC(19), PERIPH_A, 0); /* CC */ - select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */ - select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */ - select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */ - select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */ - select_peripheral(PC(24), PERIPH_A, 0); /* MODE */ - select_peripheral(PC(25), PERIPH_A, 0); /* PWR */ - select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */ - select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */ - select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */ - select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */ - select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */ - select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */ - select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */ - select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */ - select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */ - select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */ - select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */ - select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */ - select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */ - select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */ - select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */ - select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */ - select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */ - select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */ - select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */ - select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */ - select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */ - select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */ - select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */ - select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */ - break; - case 1: - select_peripheral(PE(0), PERIPH_B, 0); /* CC */ - select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */ - select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */ - select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */ - select_peripheral(PE(1), PERIPH_B, 0); /* DVAL */ - select_peripheral(PE(2), PERIPH_B, 0); /* MODE */ - select_peripheral(PC(25), PERIPH_A, 0); /* PWR */ - select_peripheral(PE(3), PERIPH_B, 0); /* DATA0 */ - select_peripheral(PE(4), PERIPH_B, 0); /* DATA1 */ - select_peripheral(PE(5), PERIPH_B, 0); /* DATA2 */ - select_peripheral(PE(6), PERIPH_B, 0); /* DATA3 */ - select_peripheral(PE(7), PERIPH_B, 0); /* DATA4 */ - select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */ - select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */ - select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */ - select_peripheral(PE(8), PERIPH_B, 0); /* DATA8 */ - select_peripheral(PE(9), PERIPH_B, 0); /* DATA9 */ - select_peripheral(PE(10), PERIPH_B, 0); /* DATA10 */ - select_peripheral(PE(11), PERIPH_B, 0); /* DATA11 */ - select_peripheral(PE(12), PERIPH_B, 0); /* DATA12 */ - select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */ - select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */ - select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */ - select_peripheral(PE(13), PERIPH_B, 0); /* DATA16 */ - select_peripheral(PE(14), PERIPH_B, 0); /* DATA17 */ - select_peripheral(PE(15), PERIPH_B, 0); /* DATA18 */ - select_peripheral(PE(16), PERIPH_B, 0); /* DATA19 */ - select_peripheral(PE(17), PERIPH_B, 0); /* DATA20 */ - select_peripheral(PE(18), PERIPH_B, 0); /* DATA21 */ - select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */ - select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */ - break; - default: - goto err_invalid_id; + if (pin_mask == 0ULL) + /* Default to "full" lcdc control signals and 24bit */ + pin_mask = ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL; + + /* LCDC on port C */ + for (i = 19; i < 32; i++) { + if (pin_mask & (1ULL << i)) + at32_select_periph(GPIO_PIOC_BASE + i, + GPIO_PERIPH_A, 0); + } + + /* LCDC on port D */ + for (i = 0; i < 18; i++) { + if (pin_mask & (1ULL << i)) + at32_select_periph(GPIO_PIOD_BASE + i, + GPIO_PERIPH_A, 0); + } + + /* LCDC on port E */ + for (i = 0; i < 19; i++) { + if (pin_mask & (1ULL << (i + 32))) + at32_select_periph(GPIO_PIOE_BASE + i, + GPIO_PERIPH_B, 0); } clk_set_parent(&atmel_lcdfb0_pixclk, &pll0); diff --git a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h index 1e9852d..a77d372 100644 --- a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h +++ b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h @@ -83,4 +83,132 @@ #define HMATRIX_BASE 0xfff00800 #define SDRAMC_BASE 0xfff03800 +/* LCDC on port C */ +#define ATMEL_LCDC_PC_CC (1ULL << 19) +#define ATMEL_LCDC_PC_HSYNC (1ULL << 20) +#define ATMEL_LCDC_PC_PCLK (1ULL << 21) +#define ATMEL_LCDC_PC_VSYNC (1ULL << 22) +#define ATMEL_LCDC_PC_DVAL (1ULL << 23) +#define ATMEL_LCDC_PC_MODE (1ULL << 24) +#define ATMEL_LCDC_PC_PWR (1ULL << 25) +#define ATMEL_LCDC_PC_DATA0 (1ULL << 26) +#define ATMEL_LCDC_PC_DATA1 (1ULL << 27) +#define ATMEL_LCDC_PC_DATA2 (1ULL << 28) +#define ATMEL_LCDC_PC_DATA3 (1ULL << 29) +#define ATMEL_LCDC_PC_DATA4 (1ULL << 30) +#define ATMEL_LCDC_PC_DATA5 (1ULL << 31) + +/* LCDC on port D */ +#define ATMEL_LCDC_PD_DATA6 (1ULL << 0) +#define ATMEL_LCDC_PD_DATA7 (1ULL << 1) +#define ATMEL_LCDC_PD_DATA8 (1ULL << 2) +#define ATMEL_LCDC_PD_DATA9 (1ULL << 3) +#define ATMEL_LCDC_PD_DATA10 (1ULL << 4) +#define ATMEL_LCDC_PD_DATA11 (1ULL << 5) +#define ATMEL_LCDC_PD_DATA12 (1ULL << 6) +#define ATMEL_LCDC_PD_DATA13 (1ULL << 7) +#define ATMEL_LCDC_PD_DATA14 (1ULL << 8) +#define ATMEL_LCDC_PD_DATA15 (1ULL << 9) +#define ATMEL_LCDC_PD_DATA16 (1ULL << 10) +#define ATMEL_LCDC_PD_DATA17 (1ULL << 11) +#define ATMEL_LCDC_PD_DATA18 (1ULL << 12) +#define ATMEL_LCDC_PD_DATA19 (1ULL << 13) +#define ATMEL_LCDC_PD_DATA20 (1ULL << 14) +#define ATMEL_LCDC_PD_DATA21 (1ULL << 15) +#define ATMEL_LCDC_PD_DATA22 (1ULL << 16) +#define ATMEL_LCDC_PD_DATA23 (1ULL << 17) + +/* LCDC on port E */ +#define ATMEL_LCDC_PE_CC (1ULL << (32 + 0)) +#define ATMEL_LCDC_PE_DVAL (1ULL << (32 + 1)) +#define ATMEL_LCDC_PE_MODE (1ULL << (32 + 2)) +#define ATMEL_LCDC_PE_DATA0 (1ULL << (32 + 3)) +#define ATMEL_LCDC_PE_DATA1 (1ULL << (32 + 4)) +#define ATMEL_LCDC_PE_DATA2 (1ULL << (32 + 5)) +#define ATMEL_LCDC_PE_DATA3 (1ULL << (32 + 6)) +#define ATMEL_LCDC_PE_DATA4 (1ULL << (32 + 7)) +#define ATMEL_LCDC_PE_DATA8 (1ULL << (32 + 8)) +#define ATMEL_LCDC_PE_DATA9 (1ULL << (32 + 9)) +#define ATMEL_LCDC_PE_DATA10 (1ULL << (32 + 10)) +#define ATMEL_LCDC_PE_DATA11 (1ULL << (32 + 11)) +#define ATMEL_LCDC_PE_DATA12 (1ULL << (32 + 12)) +#define ATMEL_LCDC_PE_DATA16 (1ULL << (32 + 13)) +#define ATMEL_LCDC_PE_DATA17 (1ULL << (32 + 14)) +#define ATMEL_LCDC_PE_DATA18 (1ULL << (32 + 15)) +#define ATMEL_LCDC_PE_DATA19 (1ULL << (32 + 16)) +#define ATMEL_LCDC_PE_DATA20 (1ULL << (32 + 17)) +#define ATMEL_LCDC_PE_DATA21 (1ULL << (32 + 18)) + + +#define ATMEL_LCDC(PORT, PIN) (ATMEL_LCDC_##PORT##_##PIN) + + +#define ATMEL_LCDC_PRI_24B_DATA ( \ + ATMEL_LCDC(PC, DATA0) | ATMEL_LCDC(PC, DATA1) | \ + ATMEL_LCDC(PC, DATA2) | ATMEL_LCDC(PC, DATA3) | \ + ATMEL_LCDC(PC, DATA4) | ATMEL_LCDC(PC, DATA5) | \ + ATMEL_LCDC(PD, DATA6) | ATMEL_LCDC(PD, DATA7) | \ + ATMEL_LCDC(PD, DATA8) | ATMEL_LCDC(PD, DATA9) | \ + ATMEL_LCDC(PD, DATA10) | ATMEL_LCDC(PD, DATA11) | \ + ATMEL_LCDC(PD, DATA12) | ATMEL_LCDC(PD, DATA13) | \ + ATMEL_LCDC(PD, DATA14) | ATMEL_LCDC(PD, DATA15) | \ + ATMEL_LCDC(PD, DATA16) | ATMEL_LCDC(PD, DATA17) | \ + ATMEL_LCDC(PD, DATA18) | ATMEL_LCDC(PD, DATA19) | \ + ATMEL_LCDC(PD, DATA20) | ATMEL_LCDC(PD, DATA21) | \ + ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23)) + +#define ATMEL_LCDC_ALT_24B_DATA ( \ + ATMEL_LCDC(PE, DATA0) | ATMEL_LCDC(PE, DATA1) | \ + ATMEL_LCDC(PE, DATA2) | ATMEL_LCDC(PE, DATA3) | \ + ATMEL_LCDC(PE, DATA4) | ATMEL_LCDC(PC, DATA5) | \ + ATMEL_LCDC(PD, DATA6) | ATMEL_LCDC(PD, DATA7) | \ + ATMEL_LCDC(PE, DATA8) | ATMEL_LCDC(PE, DATA9) | \ + ATMEL_LCDC(PE, DATA10) | ATMEL_LCDC(PE, DATA11) | \ + ATMEL_LCDC(PE, DATA12) | ATMEL_LCDC(PD, DATA13) | \ + ATMEL_LCDC(PD, DATA14) | ATMEL_LCDC(PD, DATA15) | \ + ATMEL_LCDC(PE, DATA16) | ATMEL_LCDC(PE, DATA17) | \ + ATMEL_LCDC(PE, DATA18) | ATMEL_LCDC(PE, DATA19) | \ + ATMEL_LCDC(PE, DATA20) | ATMEL_LCDC(PE, DATA21) | \ + ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23)) + +#define ATMEL_LCDC_PRI_15B_DATA ( \ + ATMEL_LCDC(PC, DATA0) | ATMEL_LCDC(PC, DATA1) | \ + ATMEL_LCDC(PC, DATA2) | ATMEL_LCDC(PC, DATA3) | \ + ATMEL_LCDC(PC, DATA4) | ATMEL_LCDC(PC, DATA5) | \ + ATMEL_LCDC(PD, DATA8) | ATMEL_LCDC(PD, DATA9) | \ + ATMEL_LCDC(PD, DATA10) | ATMEL_LCDC(PD, DATA11) | \ + ATMEL_LCDC(PD, DATA12) | ATMEL_LCDC(PD, DATA16) | \ + ATMEL_LCDC(PD, DATA17) | ATMEL_LCDC(PD, DATA18) | \ + ATMEL_LCDC(PD, DATA19) | ATMEL_LCDC(PD, DATA20)) + +#define ATMEL_LCDC_ALT_15B_DATA ( \ + ATMEL_LCDC(PE, DATA0) | ATMEL_LCDC(PE, DATA1) | \ + ATMEL_LCDC(PE, DATA2) | ATMEL_LCDC(PE, DATA3) | \ + ATMEL_LCDC(PE, DATA4) | ATMEL_LCDC(PC, DATA5) | \ + ATMEL_LCDC(PE, DATA8) | ATMEL_LCDC(PE, DATA9) | \ + ATMEL_LCDC(PE, DATA10) | ATMEL_LCDC(PE, DATA11) | \ + ATMEL_LCDC(PE, DATA12) | ATMEL_LCDC(PE, DATA16) | \ + ATMEL_LCDC(PE, DATA17) | ATMEL_LCDC(PE, DATA18) | \ + ATMEL_LCDC(PE, DATA19) | ATMEL_LCDC(PE, DATA20)) + +#define ATMEL_LCDC_PRI_CONTROL ( \ + ATMEL_LCDC(PC, CC) | ATMEL_LCDC(PC, DVAL) | \ + ATMEL_LCDC(PC, MODE) | ATMEL_LCDC(PC, PWR)) + +#define ATMEL_LCDC_ALT_CONTROL ( \ + ATMEL_LCDC(PE, CC) | ATMEL_LCDC(PE, DVAL) | \ + ATMEL_LCDC(PE, MODE) | ATMEL_LCDC(PC, PWR)) + +#define ATMEL_LCDC_CONTROL ( \ + ATMEL_LCDC(PC, HSYNC) | ATMEL_LCDC(PC, VSYNC) | \ + ATMEL_LCDC(PC, PCLK)) + +#define ATMEL_LCDC_PRI_24BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_PRI_24B_DATA) + +#define ATMEL_LCDC_ALT_24BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_24B_DATA) + +#define ATMEL_LCDC_PRI_15BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_PRI_15B_DATA) + +#define ATMEL_LCDC_ALT_15BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_15B_DATA) + #endif /* __ASM_ARCH_AT32AP700X_H__ */ diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h index e60e907..c48386d 100644 --- a/arch/avr32/mach-at32ap/include/mach/board.h +++ b/arch/avr32/mach-at32ap/include/mach/board.h @@ -43,7 +43,7 @@ struct atmel_lcdfb_info; struct platform_device * at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data, unsigned long fbmem_start, unsigned long fbmem_len, - unsigned int pin_config); + u64 pin_mask); struct usba_platform_data; struct platform_device * -- cgit v1.1 From 96706600de83966812b01a3cb310a13da2a1a4e9 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sat, 6 Sep 2008 20:19:02 -0700 Subject: ngw100: export J15 through sysfs The NGW100 board has jumper J15 (near the reset button) which is unused. This patch exports it through the GPIO sysfs support (as /sys/class/gpio/gpio62/value) so that it's easily queried by boot scripts or whatever might want to know if the jumper has been installed (value = 0) or not (value = 1, "default"). Signed-off-by: David Brownell [haavard.skinnemoen@atmel.com: add missing include] Signed-off-by: Haavard Skinnemoen --- arch/avr32/boards/atngw100/setup.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch/avr32') diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c index b8286f1ce..abcb0d9 100644 --- a/arch/avr32/boards/atngw100/setup.c +++ b/arch/avr32/boards/atngw100/setup.c @@ -9,6 +9,7 @@ */ #include #include +#include #include #include #include @@ -204,6 +205,15 @@ postcore_initcall(atngw100_init); static int __init atngw100_arch_init(void) { + /* PB30 is the otherwise unused jumper on the mainboard, with an + * external pullup; the jumper grounds it. Use it however you + * like, including letting U-Boot or Linux tweak boot sequences. + */ + at32_select_gpio(GPIO_PIN_PB(30), 0); + gpio_request(GPIO_PIN_PB(30), "j15"); + gpio_direction_input(GPIO_PIN_PB(30)); + gpio_export(GPIO_PIN_PB(30), false); + /* set_irq_type() after the arch_initcall for EIC has run, and * before the I2C subsystem could try using this IRQ. */ -- cgit v1.1 From ece2678c62ce13ef11a8b43526ccc5db8d711ed3 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Fri, 19 Sep 2008 17:13:28 +0200 Subject: avr32: Provide a way to deselect pins in the portmux Currently, setting up the portmux is completely one-shot: Once a pin is muxed, the portmux driver will complain loudly and refuse to do anything if you try to set up the same pin again. Sometimes, it may be necessary to change the configuration of a pin after it has been set up initially. This patch adds a way to undo the previous configuration, allowing the pin to be reconfigured. Signed-off-by: Haavard Skinnemoen --- arch/avr32/mach-at32ap/include/mach/portmux.h | 1 + arch/avr32/mach-at32ap/pio.c | 19 +++++++++++++++++++ 2 files changed, 20 insertions(+) (limited to 'arch/avr32') diff --git a/arch/avr32/mach-at32ap/include/mach/portmux.h b/arch/avr32/mach-at32ap/include/mach/portmux.h index b1abe6b..4bbf99e 100644 --- a/arch/avr32/mach-at32ap/include/mach/portmux.h +++ b/arch/avr32/mach-at32ap/include/mach/portmux.h @@ -24,6 +24,7 @@ void at32_select_periph(unsigned int pin, unsigned int periph, unsigned long flags); void at32_select_gpio(unsigned int pin, unsigned long flags); +void at32_deselect_pin(unsigned int pin); void at32_reserve_pin(unsigned int pin); #endif /* __ASM_ARCH_PORTMUX_H__ */ diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c index 405ee6b..90ef538 100644 --- a/arch/avr32/mach-at32ap/pio.c +++ b/arch/avr32/mach-at32ap/pio.c @@ -134,6 +134,25 @@ fail: dump_stack(); } +/* + * Undo a previous pin reservation. Will not affect the hardware + * configuration. + */ +void at32_deselect_pin(unsigned int pin) +{ + struct pio_device *pio; + unsigned int pin_index = pin & 0x1f; + + pio = gpio_to_pio(pin); + if (unlikely(!pio)) { + printk("pio: invalid pin %u\n", pin); + dump_stack(); + return; + } + + clear_bit(pin_index, &pio->pinmux_mask); +} + /* Reserve a pin, preventing anyone else from changing its configuration. */ void __init at32_reserve_pin(unsigned int pin) { -- cgit v1.1 From d6634db8fe1784d0a8e4e156970fec034708446e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Sun, 21 Sep 2008 23:52:07 +0200 Subject: avr32: Use platform_driver_probe for pio platform driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The probe function of the pio platform driver lives in the init section and so a pio device that is created after the init section is discarded probably results in an oops. Even if this cannot happen, using platform_driver_probe is cleaner. (If this can happen and should be supported the probe function must live in the devinit section instead.) Signed-off-by: Uwe Kleine-König Signed-off-by: Haavard Skinnemoen --- arch/avr32/mach-at32ap/pio.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch/avr32') diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c index 90ef538..ef2561e 100644 --- a/arch/avr32/mach-at32ap/pio.c +++ b/arch/avr32/mach-at32ap/pio.c @@ -401,7 +401,6 @@ static int __init pio_probe(struct platform_device *pdev) } static struct platform_driver pio_driver = { - .probe = pio_probe, .driver = { .name = "pio", }, @@ -409,7 +408,7 @@ static struct platform_driver pio_driver = { static int __init pio_init(void) { - return platform_driver_register(&pio_driver); + return platform_driver_probe(&pio_driver, pio_probe); } postcore_initcall(pio_init); -- cgit v1.1 From 787928e7473246991177e8cd7eeaf4cb1b3a8fbc Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Sun, 21 Sep 2008 23:52:08 +0200 Subject: avr32: Use platform_driver_probe for pdc platform driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The probe function of the pdc platform driver lives in the init section and so a pdc device that is created after the init section is discarded probably results in an oops. Even if this cannot happen, using platform_driver_probe is cleaner. (If this can happen and should be supported the probe function must live in the devinit section instead.) Signed-off-by: Uwe Kleine-König Signed-off-by: Haavard Skinnemoen --- arch/avr32/mach-at32ap/pdc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch/avr32') diff --git a/arch/avr32/mach-at32ap/pdc.c b/arch/avr32/mach-at32ap/pdc.c index 1040bda..61ab15a 100644 --- a/arch/avr32/mach-at32ap/pdc.c +++ b/arch/avr32/mach-at32ap/pdc.c @@ -35,7 +35,6 @@ static int __init pdc_probe(struct platform_device *pdev) } static struct platform_driver pdc_driver = { - .probe = pdc_probe, .driver = { .name = "pdc", }, @@ -43,6 +42,6 @@ static struct platform_driver pdc_driver = { static int __init pdc_init(void) { - return platform_driver_register(&pdc_driver); + return platform_driver_probe(&pdc_driver, pdc_probe); } arch_initcall(pdc_init); -- cgit v1.1 From 300bb762513f12068bf6166e0a1a02a4031a979c Mon Sep 17 00:00:00 2001 From: Alex Raimondi Date: Mon, 22 Sep 2008 21:40:55 +0200 Subject: avr32: Replace static clock list with dynamic linked list This replaces the at32_clock_list array with a linked list. Clocks can now be registered (added) to the list. Signed-off-by: Alex Raimondi Signed-off-by: Haavard Skinnemoen --- arch/avr32/mach-at32ap/at32ap700x.c | 22 +++++++++------- arch/avr32/mach-at32ap/clock.c | 52 ++++++++++++++++++++++++++++--------- arch/avr32/mach-at32ap/clock.h | 8 +++--- 3 files changed, 58 insertions(+), 24 deletions(-) (limited to 'arch/avr32') diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index c28dd17..fd306c4 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -2028,7 +2028,7 @@ static struct clk gclk4 = { .index = 4, }; -struct clk *at32_clock_list[] = { +static __initdata struct clk *init_clocks[] = { &osc32k, &osc0, &osc1, @@ -2092,7 +2092,6 @@ struct clk *at32_clock_list[] = { &gclk3, &gclk4, }; -unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list); void __init setup_platform(void) { @@ -2123,14 +2122,19 @@ void __init setup_platform(void) genclk_init_parent(&abdac0_sample_clk); /* - * Turn on all clocks that have at least one user already, and - * turn off everything else. We only do this for module - * clocks, and even though it isn't particularly pretty to - * check the address of the mode function, it should do the - * trick... + * Build initial dynamic clock list by registering all clocks + * from the array. + * At the same time, turn on all clocks that have at least one + * user already, and turn off everything else. We only do this + * for module clocks, and even though it isn't particularly + * pretty to check the address of the mode function, it should + * do the trick... */ - for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) { - struct clk *clk = at32_clock_list[i]; + for (i = 0; i < ARRAY_SIZE(init_clocks); i++) { + struct clk *clk = init_clocks[i]; + + /* first, register clock */ + at32_clk_register(clk); if (clk->users == 0) continue; diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c index 6c27dda..138a00a 100644 --- a/arch/avr32/mach-at32ap/clock.c +++ b/arch/avr32/mach-at32ap/clock.c @@ -15,24 +15,40 @@ #include #include #include +#include #include #include "clock.h" +/* at32 clock list */ +static LIST_HEAD(at32_clock_list); + static DEFINE_SPINLOCK(clk_lock); +static DEFINE_SPINLOCK(clk_list_lock); + +void at32_clk_register(struct clk *clk) +{ + spin_lock(&clk_list_lock); + /* add the new item to the end of the list */ + list_add_tail(&clk->list, &at32_clock_list); + spin_unlock(&clk_list_lock); +} struct clk *clk_get(struct device *dev, const char *id) { - int i; + struct clk *clk; - for (i = 0; i < at32_nr_clocks; i++) { - struct clk *clk = at32_clock_list[i]; + spin_lock(&clk_list_lock); - if (clk->dev == dev && strcmp(id, clk->name) == 0) + list_for_each_entry(clk, &at32_clock_list, list) { + if (clk->dev == dev && strcmp(id, clk->name) == 0) { + spin_unlock(&clk_list_lock); return clk; + } } + spin_unlock(&clk_list_lock); return ERR_PTR(-ENOENT); } EXPORT_SYMBOL(clk_get); @@ -203,8 +219,8 @@ dump_clock(struct clk *parent, struct clkinf *r) /* cost of this scan is small, but not linear... */ r->nest = nest + NEST_DELTA; - for (i = 3; i < at32_nr_clocks; i++) { - clk = at32_clock_list[i]; + + list_for_each_entry(clk, &at32_clock_list, list) { if (clk->parent == parent) dump_clock(clk, r); } @@ -215,6 +231,7 @@ static int clk_show(struct seq_file *s, void *unused) { struct clkinf r; int i; + struct clk *clk; /* show all the power manager registers */ seq_printf(s, "MCCTRL = %8x\n", pm_readl(MCCTRL)); @@ -234,14 +251,25 @@ static int clk_show(struct seq_file *s, void *unused) seq_printf(s, "\n"); - /* show clock tree as derived from the three oscillators - * we "know" are at the head of the list - */ r.s = s; r.nest = 0; - dump_clock(at32_clock_list[0], &r); - dump_clock(at32_clock_list[1], &r); - dump_clock(at32_clock_list[2], &r); + /* protected from changes on the list while dumping */ + spin_lock(&clk_list_lock); + + /* show clock tree as derived from the three oscillators */ + clk = clk_get(NULL, "osc32k"); + dump_clock(clk, &r); + clk_put(clk); + + clk = clk_get(NULL, "osc0"); + dump_clock(clk, &r); + clk_put(clk); + + clk = clk_get(NULL, "osc1"); + dump_clock(clk, &r); + clk_put(clk); + + spin_unlock(&clk_list_lock); return 0; } diff --git a/arch/avr32/mach-at32ap/clock.h b/arch/avr32/mach-at32ap/clock.h index bb8e1f2..623bf0e 100644 --- a/arch/avr32/mach-at32ap/clock.h +++ b/arch/avr32/mach-at32ap/clock.h @@ -12,8 +12,13 @@ * published by the Free Software Foundation. */ #include +#include + + +void at32_clk_register(struct clk *clk); struct clk { + struct list_head list; /* linking element */ const char *name; /* Clock name/function */ struct device *dev; /* Device the clock is used by */ struct clk *parent; /* Parent clock, if any */ @@ -25,6 +30,3 @@ struct clk { u16 users; /* Enabled if non-zero */ u16 index; /* Sibling index */ }; - -extern struct clk *at32_clock_list[]; -extern unsigned int at32_nr_clocks; -- cgit v1.1 From 6b918657b7431e4c5c953b8222ae2f4fc1b2576a Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Thu, 7 Aug 2008 14:08:49 +0200 Subject: atmel-mci: Platform code for supporting multiple mmc slots Add the necessary platform infrastructure to support multiple mmc/sdcard slots all at once through a single controller. Currently, the driver will use the first valid slot it finds and stick with that, but later patches will add support for switching between several slots on the fly. Extend the platform data structure with per-slot information: MMC/SDcard bus width and card detect/write protect pins. This will affect the pin muxing as well as the capabilities announced to the mmc core. Note that board code is now required to supply a mci_platform_data struct to at32_add_device_mci(). Signed-off-by: Haavard Skinnemoen --- arch/avr32/boards/atngw100/setup.c | 7 +++- arch/avr32/boards/atstk1000/atstk1002.c | 18 +++++---- arch/avr32/boards/atstk1000/atstk1003.c | 12 +++++- arch/avr32/boards/atstk1000/atstk1004.c | 12 +++++- arch/avr32/include/asm/atmel-mci.h | 22 +++++++++- arch/avr32/mach-at32ap/at32ap700x.c | 72 ++++++++++++++++++++++++--------- 6 files changed, 113 insertions(+), 30 deletions(-) (limited to 'arch/avr32') diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c index b8286f1ce..f308520 100644 --- a/arch/avr32/boards/atngw100/setup.c +++ b/arch/avr32/boards/atngw100/setup.c @@ -53,8 +53,11 @@ static struct spi_board_info spi0_board_info[] __initdata = { }; static struct mci_platform_data __initdata mci0_data = { - .detect_pin = GPIO_PIN_PC(25), - .wp_pin = GPIO_PIN_PE(0), + .slot[0] = { + .bus_width = 4, + .detect_pin = GPIO_PIN_PC(25), + .wp_pin = GPIO_PIN_PE(0), + }, }; /* diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index dfc3443..4fedbc4 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -264,16 +264,20 @@ void __init setup_board(void) #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM +static struct mci_platform_data __initdata mci0_data = { + .slot[0] = { + .bus_width = 4, + /* MMC card detect requires MACB0 *NOT* be used */ #ifdef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM -static struct mci_platform_data __initdata mci0_data = { - .detect_pin = GPIO_PIN_PC(14), /* gpio30/sdcd */ - .wp_pin = GPIO_PIN_PC(15), /* gpio31/sdwp */ -}; -#define MCI_PDATA &mci0_data + .detect_pin = GPIO_PIN_PC(14), /* gpio30/sdcd */ + .wp_pin = GPIO_PIN_PC(15), /* gpio31/sdwp */ #else -#define MCI_PDATA NULL + .detect_pin = -ENODEV, + .wp_pin = -ENODEV, #endif /* SW6 for sd{cd,wp} routing */ + }, +}; #endif /* SW2 for MMC signal routing */ @@ -326,7 +330,7 @@ static int __init atstk1002_init(void) at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); #endif #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM - at32_add_device_mci(0, MCI_PDATA); + at32_add_device_mci(0, &mci0_pdata); #endif #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM set_hw_addr(at32_add_device_eth(1, ð_data[1])); diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c index 0cf6641..acc6123 100644 --- a/arch/avr32/boards/atstk1000/atstk1003.c +++ b/arch/avr32/boards/atstk1000/atstk1003.c @@ -66,6 +66,16 @@ static struct spi_board_info spi1_board_info[] __initdata = { { } }; #endif +#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM +static struct mci_platform_data __initdata mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = -ENODEV, + .wp_pin = -ENODEV, + }, +}; +#endif + #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC static void __init atstk1003_setup_extdac(void) { @@ -154,7 +164,7 @@ static int __init atstk1003_init(void) at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); #endif #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM - at32_add_device_mci(0, NULL); + at32_add_device_mci(0, &mci0_data); #endif at32_add_device_usba(0, NULL); #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c index 50a5273..d6a2d02 100644 --- a/arch/avr32/boards/atstk1000/atstk1004.c +++ b/arch/avr32/boards/atstk1000/atstk1004.c @@ -71,6 +71,16 @@ static struct spi_board_info spi1_board_info[] __initdata = { { } }; #endif +#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM +static struct mci_platform_data __initdata mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = -ENODEV, + .wp_pin = -ENODEV, + }, +}; +#endif + #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC static void __init atstk1004_setup_extdac(void) { @@ -137,7 +147,7 @@ static int __init atstk1004_init(void) at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); #endif #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM - at32_add_device_mci(0, NULL); + at32_add_device_mci(0, &mci0_data); #endif at32_add_device_lcdc(0, &atstk1000_lcdc_data, fbmem_start, fbmem_size, 0); diff --git a/arch/avr32/include/asm/atmel-mci.h b/arch/avr32/include/asm/atmel-mci.h index c2ea6e1..d38c64c 100644 --- a/arch/avr32/include/asm/atmel-mci.h +++ b/arch/avr32/include/asm/atmel-mci.h @@ -1,9 +1,29 @@ #ifndef __ASM_AVR32_ATMEL_MCI_H #define __ASM_AVR32_ATMEL_MCI_H -struct mci_platform_data { +/** + * struct mci_slot_pdata - board-specific per-slot configuration + * @bus_width: Number of data lines wired up the slot + * @detect_pin: GPIO pin wired to the card detect switch + * @wp_pin: GPIO pin wired to the write protect sensor + * + * If a given slot is not present on the board, @bus_width should be + * set to 0. The other fields are ignored in this case. + * + * Any pins that aren't available should be set to a negative value. + */ +struct mci_slot_pdata { + unsigned int bus_width; int detect_pin; int wp_pin; }; +/** + * struct mci_platform_data - board-specific MMC/SDcard configuration + * @slot: Per-slot configuration data. + */ +struct mci_platform_data { + struct mci_slot_pdata slot[2]; +}; + #endif /* __ASM_AVR32_ATMEL_MCI_H */ diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index e01dbe4..9967d5a 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -1272,10 +1272,13 @@ static struct clk atmel_mci0_pclk = { struct platform_device *__init at32_add_device_mci(unsigned int id, struct mci_platform_data *data) { - struct mci_platform_data _data; struct platform_device *pdev; - if (id != 0) + if (id != 0 || !data) + return NULL; + + /* Must have at least one usable slot */ + if (!data->slot[0].bus_width && !data->slot[1].bus_width) return NULL; pdev = platform_device_alloc("atmel_mci", id); @@ -1286,28 +1289,61 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data) ARRAY_SIZE(atmel_mci0_resource))) goto fail; - if (!data) { - data = &_data; - memset(data, -1, sizeof(struct mci_platform_data)); - data->detect_pin = GPIO_PIN_NONE; - data->wp_pin = GPIO_PIN_NONE; - } if (platform_device_add_data(pdev, data, sizeof(struct mci_platform_data))) goto fail; - select_peripheral(PA(10), PERIPH_A, 0); /* CLK */ - select_peripheral(PA(11), PERIPH_A, 0); /* CMD */ - select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */ - select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */ - select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */ - select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */ + /* CLK line is common to both slots */ + select_peripheral(PA(10), PERIPH_A, 0); - if (gpio_is_valid(data->detect_pin)) - at32_select_gpio(data->detect_pin, 0); - if (gpio_is_valid(data->wp_pin)) - at32_select_gpio(data->wp_pin, 0); + switch (data->slot[0].bus_width) { + case 4: + select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */ + select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */ + select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */ + /* fall through */ + case 1: + select_peripheral(PA(11), PERIPH_A, 0); /* CMD */ + select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */ + + if (gpio_is_valid(data->slot[0].detect_pin)) + at32_select_gpio(data->slot[0].detect_pin, 0); + if (gpio_is_valid(data->slot[0].wp_pin)) + at32_select_gpio(data->slot[0].wp_pin, 0); + break; + case 0: + /* Slot is unused */ + break; + default: + goto fail; + } + + switch (data->slot[1].bus_width) { + case 4: + select_peripheral(PB(8), PERIPH_B, 0); /* DATA1 */ + select_peripheral(PB(9), PERIPH_B, 0); /* DATA2 */ + select_peripheral(PB(10), PERIPH_B, 0); /* DATA3 */ + /* fall through */ + case 1: + select_peripheral(PB(6), PERIPH_B, 0); /* CMD */ + select_peripheral(PB(7), PERIPH_B, 0); /* DATA0 */ + + if (gpio_is_valid(data->slot[1].detect_pin)) + at32_select_gpio(data->slot[1].detect_pin, 0); + if (gpio_is_valid(data->slot[1].wp_pin)) + at32_select_gpio(data->slot[1].wp_pin, 0); + break; + case 0: + /* Slot is unused */ + break; + default: + if (!data->slot[0].bus_width) + goto fail; + + data->slot[1].bus_width = 0; + break; + } atmel_mci0_pclk.dev = &pdev->dev; -- cgit v1.1 From 965ebf33ea5afb6386f5b57cc71e6572253746b3 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Wed, 17 Sep 2008 20:53:55 +0200 Subject: atmel-mci: support multiple mmc slots The Atmel MCI controller can drive multiple cards through separate sets of pins, but only one at a time. This patch adds support for multiplexing access to the controller so that multiple card slots can be used as if they were hooked up to separate mmc controllers. The atmel-mci driver registers each slot as a separate mmc_host. Both access the same common controller state, but they also have some state on their own for card detection/write protect handling, and separate shadows of the MR and SDCR registers. When one of the slots receives a request from the mmc core, the common controller state is checked. If it's idle, the request is submitted immediately. If not, the request is added to a queue. When a request is done, the queue is checked and if there is a queued request, it is submitted before the completion callback is called. This patch also includes a few cleanups and fixes, including a locking overhaul. I had to change the locking extensively in any case, so I might as well try to get it right. The driver no longer takes any irq-safe locks, which may or may not improve the overall system performance. This patch also adds a bit of documentation of the internal data structures. Signed-off-by: Haavard Skinnemoen --- arch/avr32/include/asm/atmel-mci.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'arch/avr32') diff --git a/arch/avr32/include/asm/atmel-mci.h b/arch/avr32/include/asm/atmel-mci.h index d38c64c..5d5ae12 100644 --- a/arch/avr32/include/asm/atmel-mci.h +++ b/arch/avr32/include/asm/atmel-mci.h @@ -1,6 +1,8 @@ #ifndef __ASM_AVR32_ATMEL_MCI_H #define __ASM_AVR32_ATMEL_MCI_H +#define ATMEL_MCI_MAX_NR_SLOTS 2 + /** * struct mci_slot_pdata - board-specific per-slot configuration * @bus_width: Number of data lines wired up the slot @@ -11,6 +13,10 @@ * set to 0. The other fields are ignored in this case. * * Any pins that aren't available should be set to a negative value. + * + * Note that support for multiple slots is experimental -- some cards + * might get upset if we don't get the clock management exactly right. + * But in most cases, it should work just fine. */ struct mci_slot_pdata { unsigned int bus_width; @@ -23,7 +29,7 @@ struct mci_slot_pdata { * @slot: Per-slot configuration data. */ struct mci_platform_data { - struct mci_slot_pdata slot[2]; + struct mci_slot_pdata slot[ATMEL_MCI_MAX_NR_SLOTS]; }; #endif /* __ASM_AVR32_ATMEL_MCI_H */ -- cgit v1.1 From 65e8b083fc8ec303499baa1924ae032d46d29990 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Wed, 30 Jul 2008 20:29:03 +0200 Subject: atmel-mci: Add experimental DMA support This adds support for DMA transfers through the generic DMA engine framework with the DMA slave extensions. The driver has been tested using mmc-block and ext3fs on several SD, SDHC and MMC+ cards. Reads and writes work fine, with read transfer rates up to 7.5 MiB/s on fast cards with debugging disabled. Unfortunately, the driver has been known to lock up from time to time with DMA enabled, so DMA support is currently optional and marked EXPERIMENTAL. However, I didn't see any problems while testing 13 different cards (MMC, SD and SDHC of different brands and sizes), so I suspect the "Initialize BLKR before sending data transfer command" fix that was posted earlier fixed this as well. Signed-off-by: Haavard Skinnemoen --- arch/avr32/include/asm/atmel-mci.h | 4 ++++ arch/avr32/mach-at32ap/at32ap700x.c | 16 ++++++++++++++++ 2 files changed, 20 insertions(+) (limited to 'arch/avr32') diff --git a/arch/avr32/include/asm/atmel-mci.h b/arch/avr32/include/asm/atmel-mci.h index 5d5ae12..59f3fad 100644 --- a/arch/avr32/include/asm/atmel-mci.h +++ b/arch/avr32/include/asm/atmel-mci.h @@ -3,6 +3,8 @@ #define ATMEL_MCI_MAX_NR_SLOTS 2 +struct dma_slave; + /** * struct mci_slot_pdata - board-specific per-slot configuration * @bus_width: Number of data lines wired up the slot @@ -26,9 +28,11 @@ struct mci_slot_pdata { /** * struct mci_platform_data - board-specific MMC/SDcard configuration + * @dma_slave: DMA slave interface to use in data transfers, or NULL. * @slot: Per-slot configuration data. */ struct mci_platform_data { + struct dma_slave *dma_slave; struct mci_slot_pdata slot[ATMEL_MCI_MAX_NR_SLOTS]; }; diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 9967d5a..f1b9a3a 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -1273,6 +1273,7 @@ struct platform_device *__init at32_add_device_mci(unsigned int id, struct mci_platform_data *data) { struct platform_device *pdev; + struct dw_dma_slave *dws; if (id != 0 || !data) return NULL; @@ -1289,6 +1290,21 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data) ARRAY_SIZE(atmel_mci0_resource))) goto fail; + if (data->dma_slave) + dws = kmemdup(to_dw_dma_slave(data->dma_slave), + sizeof(struct dw_dma_slave), GFP_KERNEL); + else + dws = kzalloc(sizeof(struct dw_dma_slave), GFP_KERNEL); + + dws->slave.dev = &pdev->dev; + dws->slave.dma_dev = &dw_dmac0_device.dev; + dws->slave.reg_width = DMA_SLAVE_WIDTH_32BIT; + dws->cfg_hi = (DWC_CFGH_SRC_PER(0) + | DWC_CFGH_DST_PER(1)); + dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL + | DWC_CFGL_HS_SRC_POL); + + data->dma_slave = &dws->slave; if (platform_device_add_data(pdev, data, sizeof(struct mci_platform_data))) -- cgit v1.1 From 520bab804e3fe4868890980a55fe785f1b8a55e5 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Wed, 18 Jun 2008 15:36:32 +0200 Subject: avr32: Implement {read,write}[bwl]_be Signed-off-by: Haavard Skinnemoen --- arch/avr32/include/asm/io.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/avr32') diff --git a/arch/avr32/include/asm/io.h b/arch/avr32/include/asm/io.h index a520f77..22c97ef 100644 --- a/arch/avr32/include/asm/io.h +++ b/arch/avr32/include/asm/io.h @@ -160,6 +160,14 @@ BUILDIO_IOPORT(l, u32) #define readw_relaxed readw #define readl_relaxed readl +#define readb_be __raw_readb +#define readw_be __raw_readw +#define readl_be __raw_readl + +#define writeb_be __raw_writeb +#define writew_be __raw_writew +#define writel_be __raw_writel + #define __BUILD_MEMORY_STRING(bwl, type) \ static inline void writes##bwl(volatile void __iomem *addr, \ const void *data, unsigned int count) \ -- cgit v1.1 From b3bc2c5562f06ca34b30f61c5714e96490946c81 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 28 Jul 2008 13:05:19 +0200 Subject: avr32: Minor pm_power_off cleanup Include to see the declaration of pm_power_off, and remove unneeded NULL initializer. Signed-off-by: Haavard Skinnemoen --- arch/avr32/kernel/process.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/avr32') diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c index 2c08ac9..134d530 100644 --- a/arch/avr32/kernel/process.c +++ b/arch/avr32/kernel/process.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include #include @@ -20,7 +21,7 @@ #include -void (*pm_power_off)(void) = NULL; +void (*pm_power_off)(void); EXPORT_SYMBOL(pm_power_off); /* -- cgit v1.1 From caf18f19eefc0cf5539b4e82b8aa8df6a78391a6 Mon Sep 17 00:00:00 2001 From: Julien May Date: Wed, 24 Sep 2008 10:30:47 +0200 Subject: avr32: Allow selecting multiple pins at once at32_select_periph() now takes an u32 bitmask rather than a single pin. This allows to set multiple pins at once. Signed-off-by: Alex Raimondi Signed-off-by: Haavard Skinnemoen --- arch/avr32/boards/atngw100/setup.c | 2 +- arch/avr32/boards/atstk1000/atstk1002.c | 2 +- arch/avr32/boards/atstk1000/atstk1003.c | 2 +- arch/avr32/boards/atstk1000/atstk1004.c | 2 +- arch/avr32/mach-at32ap/at32ap700x.c | 307 +++++++++++++++----------- arch/avr32/mach-at32ap/include/mach/portmux.h | 4 +- arch/avr32/mach-at32ap/pio.c | 41 ++-- 7 files changed, 212 insertions(+), 148 deletions(-) (limited to 'arch/avr32') diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c index 65db3d2..6c54580 100644 --- a/arch/avr32/boards/atngw100/setup.c +++ b/arch/avr32/boards/atngw100/setup.c @@ -194,7 +194,7 @@ static int __init atngw100_init(void) * PB28/EXTINT3 doesn't; it should be SMBALERT# (for PMBus), * but it's not available off-board. */ - at32_select_periph(GPIO_PIN_PB(28), 0, AT32_GPIOF_PULLUP); + at32_select_periph(GPIO_PIOB_BASE, 1 << 28, 0, AT32_GPIOF_PULLUP); at32_select_gpio(i2c_gpio_data.sda_pin, AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); at32_select_gpio(i2c_gpio_data.scl_pin, diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index 32aceec..2bcea80b 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -232,7 +232,7 @@ static void __init atstk1002_setup_extdac(void) goto err_set_clk; } - at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0); + at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0); at73c213_data.dac_clk = gclk; err_set_clk: diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c index acc6123..2bc300c 100644 --- a/arch/avr32/boards/atstk1000/atstk1003.c +++ b/arch/avr32/boards/atstk1000/atstk1003.c @@ -94,7 +94,7 @@ static void __init atstk1003_setup_extdac(void) goto err_set_clk; } - at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0); + at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0); at73c213_data.dac_clk = gclk; err_set_clk: diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c index 949c13e..5d48559 100644 --- a/arch/avr32/boards/atstk1000/atstk1004.c +++ b/arch/avr32/boards/atstk1000/atstk1004.c @@ -99,7 +99,7 @@ static void __init atstk1004_setup_extdac(void) goto err_set_clk; } - at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0); + at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0); at73c213_data.dac_clk = gclk; err_set_clk: diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 5d00bb8..813b684 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -82,8 +82,9 @@ static struct platform_device _name##_id##_device = { \ .num_resources = ARRAY_SIZE(_name##_id##_resource), \ } -#define select_peripheral(pin, periph, flags) \ - at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags) +#define select_peripheral(port, pin_mask, periph, flags) \ + at32_select_periph(GPIO_##port##_BASE, pin_mask, \ + GPIO_##periph, flags) #define DEV_CLK(_name, devname, bus, _index) \ static struct clk devname##_##_name = { \ @@ -871,6 +872,7 @@ static struct clk atmel_psif1_pclk = { struct platform_device *__init at32_add_device_psif(unsigned int id) { struct platform_device *pdev; + u32 pin_mask; if (!(id == 0 || id == 1)) return NULL; @@ -881,20 +883,22 @@ struct platform_device *__init at32_add_device_psif(unsigned int id) switch (id) { case 0: + pin_mask = (1 << 8) | (1 << 9); /* CLOCK & DATA */ + if (platform_device_add_resources(pdev, atmel_psif0_resource, ARRAY_SIZE(atmel_psif0_resource))) goto err_add_resources; atmel_psif0_pclk.dev = &pdev->dev; - select_peripheral(PA(8), PERIPH_A, 0); /* CLOCK */ - select_peripheral(PA(9), PERIPH_A, 0); /* DATA */ + select_peripheral(PIOA, pin_mask, PERIPH_A, 0); break; case 1: + pin_mask = (1 << 11) | (1 << 12); /* CLOCK & DATA */ + if (platform_device_add_resources(pdev, atmel_psif1_resource, ARRAY_SIZE(atmel_psif1_resource))) goto err_add_resources; atmel_psif1_pclk.dev = &pdev->dev; - select_peripheral(PB(11), PERIPH_A, 0); /* CLOCK */ - select_peripheral(PB(12), PERIPH_A, 0); /* DATA */ + select_peripheral(PIOB, pin_mask, PERIPH_A, 0); break; default: return NULL; @@ -958,26 +962,30 @@ DEV_CLK(usart, atmel_usart3, pba, 6); static inline void configure_usart0_pins(void) { - select_peripheral(PA(8), PERIPH_B, 0); /* RXD */ - select_peripheral(PA(9), PERIPH_B, 0); /* TXD */ + u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */ + + select_peripheral(PIOA, pin_mask, PERIPH_B, 0); } static inline void configure_usart1_pins(void) { - select_peripheral(PA(17), PERIPH_A, 0); /* RXD */ - select_peripheral(PA(18), PERIPH_A, 0); /* TXD */ + u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */ + + select_peripheral(PIOA, pin_mask, PERIPH_A, 0); } static inline void configure_usart2_pins(void) { - select_peripheral(PB(26), PERIPH_B, 0); /* RXD */ - select_peripheral(PB(27), PERIPH_B, 0); /* TXD */ + u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */ + + select_peripheral(PIOB, pin_mask, PERIPH_B, 0); } static inline void configure_usart3_pins(void) { - select_peripheral(PB(18), PERIPH_B, 0); /* RXD */ - select_peripheral(PB(17), PERIPH_B, 0); /* TXD */ + u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */ + + select_peripheral(PIOB, pin_mask, PERIPH_B, 0); } static struct platform_device *__initdata at32_usarts[4]; @@ -1057,59 +1065,69 @@ struct platform_device *__init at32_add_device_eth(unsigned int id, struct eth_platform_data *data) { struct platform_device *pdev; + u32 pin_mask; switch (id) { case 0: pdev = &macb0_device; - select_peripheral(PC(3), PERIPH_A, 0); /* TXD0 */ - select_peripheral(PC(4), PERIPH_A, 0); /* TXD1 */ - select_peripheral(PC(7), PERIPH_A, 0); /* TXEN */ - select_peripheral(PC(8), PERIPH_A, 0); /* TXCK */ - select_peripheral(PC(9), PERIPH_A, 0); /* RXD0 */ - select_peripheral(PC(10), PERIPH_A, 0); /* RXD1 */ - select_peripheral(PC(13), PERIPH_A, 0); /* RXER */ - select_peripheral(PC(15), PERIPH_A, 0); /* RXDV */ - select_peripheral(PC(16), PERIPH_A, 0); /* MDC */ - select_peripheral(PC(17), PERIPH_A, 0); /* MDIO */ + pin_mask = (1 << 3); /* TXD0 */ + pin_mask |= (1 << 4); /* TXD1 */ + pin_mask |= (1 << 7); /* TXEN */ + pin_mask |= (1 << 8); /* TXCK */ + pin_mask |= (1 << 9); /* RXD0 */ + pin_mask |= (1 << 10); /* RXD1 */ + pin_mask |= (1 << 13); /* RXER */ + pin_mask |= (1 << 15); /* RXDV */ + pin_mask |= (1 << 16); /* MDC */ + pin_mask |= (1 << 17); /* MDIO */ if (!data->is_rmii) { - select_peripheral(PC(0), PERIPH_A, 0); /* COL */ - select_peripheral(PC(1), PERIPH_A, 0); /* CRS */ - select_peripheral(PC(2), PERIPH_A, 0); /* TXER */ - select_peripheral(PC(5), PERIPH_A, 0); /* TXD2 */ - select_peripheral(PC(6), PERIPH_A, 0); /* TXD3 */ - select_peripheral(PC(11), PERIPH_A, 0); /* RXD2 */ - select_peripheral(PC(12), PERIPH_A, 0); /* RXD3 */ - select_peripheral(PC(14), PERIPH_A, 0); /* RXCK */ - select_peripheral(PC(18), PERIPH_A, 0); /* SPD */ + pin_mask |= (1 << 0); /* COL */ + pin_mask |= (1 << 1); /* CRS */ + pin_mask |= (1 << 2); /* TXER */ + pin_mask |= (1 << 5); /* TXD2 */ + pin_mask |= (1 << 6); /* TXD3 */ + pin_mask |= (1 << 11); /* RXD2 */ + pin_mask |= (1 << 12); /* RXD3 */ + pin_mask |= (1 << 14); /* RXCK */ + pin_mask |= (1 << 18); /* SPD */ } + + select_peripheral(PIOC, pin_mask, PERIPH_A, 0); + break; case 1: pdev = &macb1_device; - select_peripheral(PD(13), PERIPH_B, 0); /* TXD0 */ - select_peripheral(PD(14), PERIPH_B, 0); /* TXD1 */ - select_peripheral(PD(11), PERIPH_B, 0); /* TXEN */ - select_peripheral(PD(12), PERIPH_B, 0); /* TXCK */ - select_peripheral(PD(10), PERIPH_B, 0); /* RXD0 */ - select_peripheral(PD(6), PERIPH_B, 0); /* RXD1 */ - select_peripheral(PD(5), PERIPH_B, 0); /* RXER */ - select_peripheral(PD(4), PERIPH_B, 0); /* RXDV */ - select_peripheral(PD(3), PERIPH_B, 0); /* MDC */ - select_peripheral(PD(2), PERIPH_B, 0); /* MDIO */ + pin_mask = (1 << 13); /* TXD0 */ + pin_mask |= (1 << 14); /* TXD1 */ + pin_mask |= (1 << 11); /* TXEN */ + pin_mask |= (1 << 12); /* TXCK */ + pin_mask |= (1 << 10); /* RXD0 */ + pin_mask |= (1 << 6); /* RXD1 */ + pin_mask |= (1 << 5); /* RXER */ + pin_mask |= (1 << 4); /* RXDV */ + pin_mask |= (1 << 3); /* MDC */ + pin_mask |= (1 << 2); /* MDIO */ + + if (!data->is_rmii) + pin_mask |= (1 << 15); /* SPD */ + + select_peripheral(PIOD, pin_mask, PERIPH_B, 0); if (!data->is_rmii) { - select_peripheral(PC(19), PERIPH_B, 0); /* COL */ - select_peripheral(PC(23), PERIPH_B, 0); /* CRS */ - select_peripheral(PC(26), PERIPH_B, 0); /* TXER */ - select_peripheral(PC(27), PERIPH_B, 0); /* TXD2 */ - select_peripheral(PC(28), PERIPH_B, 0); /* TXD3 */ - select_peripheral(PC(29), PERIPH_B, 0); /* RXD2 */ - select_peripheral(PC(30), PERIPH_B, 0); /* RXD3 */ - select_peripheral(PC(24), PERIPH_B, 0); /* RXCK */ - select_peripheral(PD(15), PERIPH_B, 0); /* SPD */ + pin_mask = (1 << 19); /* COL */ + pin_mask |= (1 << 23); /* CRS */ + pin_mask |= (1 << 26); /* TXER */ + pin_mask |= (1 << 27); /* TXD2 */ + pin_mask |= (1 << 28); /* TXD3 */ + pin_mask |= (1 << 29); /* RXD2 */ + pin_mask |= (1 << 30); /* RXD3 */ + pin_mask |= (1 << 24); /* RXCK */ + + select_peripheral(PIOC, pin_mask, PERIPH_B, 0); } break; @@ -1177,23 +1195,28 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n) { GPIO_PIN_PB(2), GPIO_PIN_PB(3), GPIO_PIN_PB(4), GPIO_PIN_PA(27), }; struct platform_device *pdev; + u32 pin_mask; switch (id) { case 0: pdev = &atmel_spi0_device; + pin_mask = (1 << 1) | (1 << 2); /* MOSI & SCK */ + /* pullup MISO so a level is always defined */ - select_peripheral(PA(0), PERIPH_A, AT32_GPIOF_PULLUP); - select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */ - select_peripheral(PA(2), PERIPH_A, 0); /* SCK */ + select_peripheral(PIOA, (1 << 0), PERIPH_A, AT32_GPIOF_PULLUP); + select_peripheral(PIOA, pin_mask, PERIPH_A, 0); + at32_spi_setup_slaves(0, b, n, spi0_pins); break; case 1: pdev = &atmel_spi1_device; + pin_mask = (1 << 1) | (1 << 5); /* MOSI */ + /* pullup MISO so a level is always defined */ - select_peripheral(PB(0), PERIPH_B, AT32_GPIOF_PULLUP); - select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */ - select_peripheral(PB(5), PERIPH_B, 0); /* SCK */ + select_peripheral(PIOB, (1 << 0), PERIPH_B, AT32_GPIOF_PULLUP); + select_peripheral(PIOB, pin_mask, PERIPH_B, 0); + at32_spi_setup_slaves(1, b, n, spi1_pins); break; @@ -1226,6 +1249,7 @@ struct platform_device *__init at32_add_device_twi(unsigned int id, unsigned int n) { struct platform_device *pdev; + u32 pin_mask; if (id != 0) return NULL; @@ -1238,8 +1262,9 @@ struct platform_device *__init at32_add_device_twi(unsigned int id, ARRAY_SIZE(atmel_twi0_resource))) goto err_add_resources; - select_peripheral(PA(6), PERIPH_A, 0); /* SDA */ - select_peripheral(PA(7), PERIPH_A, 0); /* SDL */ + pin_mask = (1 << 6) | (1 << 7); /* SDA & SDL */ + + select_peripheral(PIOA, pin_mask, PERIPH_A, 0); atmel_twi0_pclk.dev = &pdev->dev; @@ -1274,6 +1299,8 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data) { struct platform_device *pdev; struct dw_dma_slave *dws; + u32 pioa_mask; + u32 piob_mask; if (id != 0 || !data) return NULL; @@ -1311,17 +1338,17 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data) goto fail; /* CLK line is common to both slots */ - select_peripheral(PA(10), PERIPH_A, 0); + pioa_mask = 1 << 10; switch (data->slot[0].bus_width) { case 4: - select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */ - select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */ - select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */ + pioa_mask |= 1 << 13; /* DATA1 */ + pioa_mask |= 1 << 14; /* DATA2 */ + pioa_mask |= 1 << 15; /* DATA3 */ /* fall through */ case 1: - select_peripheral(PA(11), PERIPH_A, 0); /* CMD */ - select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */ + pioa_mask |= 1 << 11; /* CMD */ + pioa_mask |= 1 << 12; /* DATA0 */ if (gpio_is_valid(data->slot[0].detect_pin)) at32_select_gpio(data->slot[0].detect_pin, 0); @@ -1335,15 +1362,19 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data) goto fail; } + select_peripheral(PIOA, pioa_mask, PERIPH_A, 0); + piob_mask = 0; + switch (data->slot[1].bus_width) { case 4: - select_peripheral(PB(8), PERIPH_B, 0); /* DATA1 */ - select_peripheral(PB(9), PERIPH_B, 0); /* DATA2 */ - select_peripheral(PB(10), PERIPH_B, 0); /* DATA3 */ + piob_mask |= 1 << 8; /* DATA1 */ + piob_mask |= 1 << 9; /* DATA2 */ + piob_mask |= 1 << 10; /* DATA3 */ /* fall through */ case 1: - select_peripheral(PB(6), PERIPH_B, 0); /* CMD */ - select_peripheral(PB(7), PERIPH_B, 0); /* DATA0 */ + piob_mask |= 1 << 6; /* CMD */ + piob_mask |= 1 << 7; /* DATA0 */ + select_peripheral(PIOB, piob_mask, PERIPH_B, 0); if (gpio_is_valid(data->slot[1].detect_pin)) at32_select_gpio(data->slot[1].detect_pin, 0); @@ -1412,7 +1443,7 @@ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data, struct fb_monspecs *monspecs; struct fb_videomode *modedb; unsigned int modedb_size; - int i; + u32 portc_mask, portd_mask, porte_mask; /* * Do a deep copy of the fb data, monspecs and modedb. Make @@ -1439,25 +1470,16 @@ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data, pin_mask = ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL; /* LCDC on port C */ - for (i = 19; i < 32; i++) { - if (pin_mask & (1ULL << i)) - at32_select_periph(GPIO_PIOC_BASE + i, - GPIO_PERIPH_A, 0); - } + portc_mask = (pin_mask & 0xfff80000) >> 19; + select_peripheral(PIOC, portc_mask, PERIPH_A, 0); /* LCDC on port D */ - for (i = 0; i < 18; i++) { - if (pin_mask & (1ULL << i)) - at32_select_periph(GPIO_PIOD_BASE + i, - GPIO_PERIPH_A, 0); - } + portd_mask = pin_mask & 0x0003ffff; + select_peripheral(PIOD, portd_mask, PERIPH_A, 0); /* LCDC on port E */ - for (i = 0; i < 19; i++) { - if (pin_mask & (1ULL << (i + 32))) - at32_select_periph(GPIO_PIOE_BASE + i, - GPIO_PERIPH_B, 0); - } + porte_mask = (pin_mask >> 32) & 0x0007ffff; + select_peripheral(PIOE, porte_mask, PERIPH_B, 0); clk_set_parent(&atmel_lcdfb0_pixclk, &pll0); clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0)); @@ -1506,6 +1528,7 @@ static struct clk atmel_pwm0_mck = { struct platform_device *__init at32_add_device_pwm(u32 mask) { struct platform_device *pdev; + u32 pin_mask; if (!mask) return NULL; @@ -1521,14 +1544,21 @@ struct platform_device *__init at32_add_device_pwm(u32 mask) if (platform_device_add_data(pdev, &mask, sizeof(mask))) goto out_free_pdev; + pin_mask = 0; if (mask & (1 << 0)) - select_peripheral(PA(28), PERIPH_A, 0); + pin_mask |= (1 << 28); if (mask & (1 << 1)) - select_peripheral(PA(29), PERIPH_A, 0); + pin_mask |= (1 << 29); + if (pin_mask > 0) + select_peripheral(PIOA, pin_mask, PERIPH_A, 0); + + pin_mask = 0; if (mask & (1 << 2)) - select_peripheral(PA(21), PERIPH_B, 0); + pin_mask |= (1 << 21); if (mask & (1 << 3)) - select_peripheral(PA(22), PERIPH_B, 0); + pin_mask |= (1 << 22); + if (pin_mask > 0) + select_peripheral(PIOA, pin_mask, PERIPH_B, 0); atmel_pwm0_mck.dev = &pdev->dev; @@ -1569,52 +1599,65 @@ struct platform_device *__init at32_add_device_ssc(unsigned int id, unsigned int flags) { struct platform_device *pdev; + u32 pin_mask = 0; switch (id) { case 0: pdev = &ssc0_device; if (flags & ATMEL_SSC_RF) - select_peripheral(PA(21), PERIPH_A, 0); /* RF */ + pin_mask |= (1 << 21); /* RF */ if (flags & ATMEL_SSC_RK) - select_peripheral(PA(22), PERIPH_A, 0); /* RK */ + pin_mask |= (1 << 22); /* RK */ if (flags & ATMEL_SSC_TK) - select_peripheral(PA(23), PERIPH_A, 0); /* TK */ + pin_mask |= (1 << 23); /* TK */ if (flags & ATMEL_SSC_TF) - select_peripheral(PA(24), PERIPH_A, 0); /* TF */ + pin_mask |= (1 << 24); /* TF */ if (flags & ATMEL_SSC_TD) - select_peripheral(PA(25), PERIPH_A, 0); /* TD */ + pin_mask |= (1 << 25); /* TD */ if (flags & ATMEL_SSC_RD) - select_peripheral(PA(26), PERIPH_A, 0); /* RD */ + pin_mask |= (1 << 26); /* RD */ + + if (pin_mask > 0) + select_peripheral(PIOA, pin_mask, PERIPH_A, 0); + break; case 1: pdev = &ssc1_device; if (flags & ATMEL_SSC_RF) - select_peripheral(PA(0), PERIPH_B, 0); /* RF */ + pin_mask |= (1 << 0); /* RF */ if (flags & ATMEL_SSC_RK) - select_peripheral(PA(1), PERIPH_B, 0); /* RK */ + pin_mask |= (1 << 1); /* RK */ if (flags & ATMEL_SSC_TK) - select_peripheral(PA(2), PERIPH_B, 0); /* TK */ + pin_mask |= (1 << 2); /* TK */ if (flags & ATMEL_SSC_TF) - select_peripheral(PA(3), PERIPH_B, 0); /* TF */ + pin_mask |= (1 << 3); /* TF */ if (flags & ATMEL_SSC_TD) - select_peripheral(PA(4), PERIPH_B, 0); /* TD */ + pin_mask |= (1 << 4); /* TD */ if (flags & ATMEL_SSC_RD) - select_peripheral(PA(5), PERIPH_B, 0); /* RD */ + pin_mask |= (1 << 5); /* RD */ + + if (pin_mask > 0) + select_peripheral(PIOA, pin_mask, PERIPH_B, 0); + break; case 2: pdev = &ssc2_device; if (flags & ATMEL_SSC_TD) - select_peripheral(PB(13), PERIPH_A, 0); /* TD */ + pin_mask |= (1 << 13); /* TD */ if (flags & ATMEL_SSC_RD) - select_peripheral(PB(14), PERIPH_A, 0); /* RD */ + pin_mask |= (1 << 14); /* RD */ if (flags & ATMEL_SSC_TK) - select_peripheral(PB(15), PERIPH_A, 0); /* TK */ + pin_mask |= (1 << 15); /* TK */ if (flags & ATMEL_SSC_TF) - select_peripheral(PB(16), PERIPH_A, 0); /* TF */ + pin_mask |= (1 << 16); /* TF */ if (flags & ATMEL_SSC_RF) - select_peripheral(PB(17), PERIPH_A, 0); /* RF */ + pin_mask |= (1 << 17); /* RF */ if (flags & ATMEL_SSC_RK) - select_peripheral(PB(18), PERIPH_A, 0); /* RK */ + pin_mask |= (1 << 18); /* RK */ + + if (pin_mask > 0) + select_peripheral(PIOB, pin_mask, PERIPH_A, 0); + break; default: return NULL; @@ -1752,14 +1795,15 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev, unsigned int cs, unsigned int extint) { static unsigned int extint_pin_map[4] __initdata = { - GPIO_PIN_PB(25), - GPIO_PIN_PB(26), - GPIO_PIN_PB(27), - GPIO_PIN_PB(28), + (1 << 25), + (1 << 26), + (1 << 27), + (1 << 28), }; static bool common_pins_initialized __initdata = false; unsigned int extint_pin; int ret; + u32 pin_mask; if (extint >= ARRAY_SIZE(extint_pin_map)) return -EINVAL; @@ -1773,7 +1817,8 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev, if (ret) return ret; - select_peripheral(PE(21), PERIPH_A, 0); /* NCS4 -> OE_N */ + /* NCS4 -> OE_N */ + select_peripheral(PIOE, (1 << 21), PERIPH_A, 0); hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF0_ENABLE); break; case 5: @@ -1783,7 +1828,8 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev, if (ret) return ret; - select_peripheral(PE(22), PERIPH_A, 0); /* NCS5 -> OE_N */ + /* NCS5 -> OE_N */ + select_peripheral(PIOE, (1 << 22), PERIPH_A, 0); hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF1_ENABLE); break; default: @@ -1791,14 +1837,17 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev, } if (!common_pins_initialized) { - select_peripheral(PE(19), PERIPH_A, 0); /* CFCE1 -> CS0_N */ - select_peripheral(PE(20), PERIPH_A, 0); /* CFCE2 -> CS1_N */ - select_peripheral(PE(23), PERIPH_A, 0); /* CFRNW -> DIR */ - select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT <- IORDY */ + pin_mask = (1 << 19); /* CFCE1 -> CS0_N */ + pin_mask |= (1 << 20); /* CFCE2 -> CS1_N */ + pin_mask |= (1 << 23); /* CFRNW -> DIR */ + pin_mask |= (1 << 24); /* NWAIT <- IORDY */ + + select_peripheral(PIOE, pin_mask, PERIPH_A, 0); + common_pins_initialized = true; } - at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH); + select_peripheral(PIOB, extint_pin, PERIPH_A, AT32_GPIOF_DEGLITCH); pdev->resource[1].start = EIM_IRQ_BASE + extint; pdev->resource[1].end = pdev->resource[1].start; @@ -1937,6 +1986,7 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data) { struct platform_device *pdev; struct ac97c_platform_data _data; + u32 pin_mask; if (id != 0) return NULL; @@ -1963,10 +2013,10 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data) sizeof(struct ac97c_platform_data))) goto fail; - select_peripheral(PB(20), PERIPH_B, 0); /* SDO */ - select_peripheral(PB(21), PERIPH_B, 0); /* SYNC */ - select_peripheral(PB(22), PERIPH_B, 0); /* SCLK */ - select_peripheral(PB(23), PERIPH_B, 0); /* SDI */ + pin_mask = (1 << 20) | (1 << 21); /* SDO & SYNC */ + pin_mask |= (1 << 22) | (1 << 23); /* SCLK & SDI */ + + select_peripheral(PIOB, pin_mask, PERIPH_B, 0); /* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */ if (data->reset_pin != GPIO_PIN_NONE) @@ -2008,6 +2058,7 @@ static struct clk abdac0_sample_clk = { struct platform_device *__init at32_add_device_abdac(unsigned int id) { struct platform_device *pdev; + u32 pin_mask; if (id != 0) return NULL; @@ -2020,10 +2071,10 @@ struct platform_device *__init at32_add_device_abdac(unsigned int id) ARRAY_SIZE(abdac0_resource))) goto err_add_resources; - select_peripheral(PB(20), PERIPH_A, 0); /* DATA1 */ - select_peripheral(PB(21), PERIPH_A, 0); /* DATA0 */ - select_peripheral(PB(22), PERIPH_A, 0); /* DATAN1 */ - select_peripheral(PB(23), PERIPH_A, 0); /* DATAN0 */ + pin_mask = (1 << 20) | (1 << 22); /* DATA1 & DATAN1 */ + pin_mask |= (1 << 21) | (1 << 23); /* DATA0 & DATAN0 */ + + select_peripheral(PIOB, pin_mask, PERIPH_A, 0); abdac0_pclk.dev = &pdev->dev; abdac0_sample_clk.dev = &pdev->dev; diff --git a/arch/avr32/mach-at32ap/include/mach/portmux.h b/arch/avr32/mach-at32ap/include/mach/portmux.h index 4bbf99e..21c7937 100644 --- a/arch/avr32/mach-at32ap/include/mach/portmux.h +++ b/arch/avr32/mach-at32ap/include/mach/portmux.h @@ -21,8 +21,8 @@ #define AT32_GPIOF_DEGLITCH 0x00000008 /* (IN) Filter glitches */ #define AT32_GPIOF_MULTIDRV 0x00000010 /* Enable multidriver option */ -void at32_select_periph(unsigned int pin, unsigned int periph, - unsigned long flags); +void at32_select_periph(unsigned int port, unsigned int pin, + unsigned int periph, unsigned long flags); void at32_select_gpio(unsigned int pin, unsigned long flags); void at32_deselect_pin(unsigned int pin); void at32_reserve_pin(unsigned int pin); diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c index ef2561e..ed81a8b 100644 --- a/arch/avr32/mach-at32ap/pio.c +++ b/arch/avr32/mach-at32ap/pio.c @@ -50,35 +50,48 @@ static struct pio_device *gpio_to_pio(unsigned int gpio) } /* Pin multiplexing API */ +static DEFINE_SPINLOCK(pio_lock); -void __init at32_select_periph(unsigned int pin, unsigned int periph, - unsigned long flags) +void __init at32_select_periph(unsigned int port, u32 pin_mask, + unsigned int periph, unsigned long flags) { struct pio_device *pio; - unsigned int pin_index = pin & 0x1f; - u32 mask = 1 << pin_index; - pio = gpio_to_pio(pin); + /* assign and verify pio */ + pio = gpio_to_pio(port); if (unlikely(!pio)) { - printk("pio: invalid pin %u\n", pin); + printk(KERN_WARNING "pio: invalid port %u\n", port); goto fail; } - if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask) - || gpiochip_is_requested(&pio->chip, pin_index))) { - printk("%s: pin %u is busy\n", pio->name, pin_index); + /* Test if any of the requested pins is already muxed */ + spin_lock(&pio_lock); + if (unlikely(pio->pinmux_mask & pin_mask)) { + printk(KERN_WARNING "%s: pin(s) busy (requested 0x%x, busy 0x%x)\n", + pio->name, pin_mask, pio->pinmux_mask & pin_mask); + spin_unlock(&pio_lock); goto fail; } - pio_writel(pio, PUER, mask); + pio->pinmux_mask |= pin_mask; + + /* enable pull ups */ + pio_writel(pio, PUER, pin_mask); + + /* select either peripheral A or B */ if (periph) - pio_writel(pio, BSR, mask); + pio_writel(pio, BSR, pin_mask); else - pio_writel(pio, ASR, mask); + pio_writel(pio, ASR, pin_mask); + + /* enable peripheral control */ + pio_writel(pio, PDR, pin_mask); - pio_writel(pio, PDR, mask); + /* Disable pull ups if not requested. */ if (!(flags & AT32_GPIOF_PULLUP)) - pio_writel(pio, PUDR, mask); + pio_writel(pio, PUDR, pin_mask); + + spin_unlock(&pio_lock); return; -- cgit v1.1 From 6eb3ebe04da4c8f31d776217b0b76ca3d00f20b1 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Sun, 12 Oct 2008 16:02:46 +0200 Subject: avr32: Fix build failures in board code Fix a few instances of board code breakage introduced by the atmel-mci platform interface changes. Signed-off-by: Haavard Skinnemoen --- arch/avr32/boards/atstk1000/atstk1002.c | 2 +- arch/avr32/boards/atstk1000/atstk1003.c | 1 + arch/avr32/boards/atstk1000/atstk1004.c | 1 + 3 files changed, 3 insertions(+), 1 deletion(-) (limited to 'arch/avr32') diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index 2bcea80b..29e5b51 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -330,7 +330,7 @@ static int __init atstk1002_init(void) at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); #endif #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM - at32_add_device_mci(0, &mci0_pdata); + at32_add_device_mci(0, &mci0_data); #endif #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM set_hw_addr(at32_add_device_eth(1, ð_data[1])); diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c index 2bc300c..be089d7f 100644 --- a/arch/avr32/boards/atstk1000/atstk1003.c +++ b/arch/avr32/boards/atstk1000/atstk1003.c @@ -19,6 +19,7 @@ #include #include +#include #include #include diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c index 5d48559..248ef23 100644 --- a/arch/avr32/boards/atstk1000/atstk1004.c +++ b/arch/avr32/boards/atstk1000/atstk1004.c @@ -21,6 +21,7 @@ #include