From 6360b1fbb4a939efd34fc770c2ebd927c55506e0 Mon Sep 17 00:00:00 2001
From: Jan Beulich <jbeulich@novell.com>
Date: Mon, 12 May 2008 15:44:41 +0200
Subject: move BUG_TABLE into RODATA

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/avr32/kernel/vmlinux.lds.S | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch/avr32')

diff --git a/arch/avr32/kernel/vmlinux.lds.S b/arch/avr32/kernel/vmlinux.lds.S
index 481cfd4..bc932c9 100644
--- a/arch/avr32/kernel/vmlinux.lds.S
+++ b/arch/avr32/kernel/vmlinux.lds.S
@@ -93,8 +93,6 @@ SECTIONS
 		__stop___ex_table = .;
 	}
 
-	BUG_TABLE
-
 	RODATA
 
 	. = ALIGN(THREAD_SIZE);
-- 
cgit v1.1


From 8bd8974fcddc468d66bd67f33c578f37987b302e Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Sun, 8 Jun 2008 23:28:45 +0200
Subject: avr32: export empty_zero_page

Fixes one of two ext4 build problems:
ERROR: "empty_zero_page" [fs/ext4/ext4dev.ko] undefined!

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/mm/init.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch/avr32')

diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c
index 0e64ddc..5ee1e40 100644
--- a/arch/avr32/mm/init.c
+++ b/arch/avr32/mm/init.c
@@ -11,6 +11,7 @@
 #include <linux/swap.h>
 #include <linux/init.h>
 #include <linux/mmzone.h>
+#include <linux/module.h>
 #include <linux/bootmem.h>
 #include <linux/pagemap.h>
 #include <linux/nodemask.h>
@@ -28,6 +29,7 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
 struct page *empty_zero_page;
+EXPORT_SYMBOL(empty_zero_page);
 
 /*
  * Cache of MMU context last used.
-- 
cgit v1.1


From 60ed7951d0c9bf8de8588384134f16474367b410 Mon Sep 17 00:00:00 2001
From: Alex <mailinglist@miromico.ch>
Date: Mon, 17 Mar 2008 14:55:06 +0100
Subject: avr32: Allow board to define oscillator rates

On our custom board we have other oscillator rates than on atngw100 and
atstk100x.

Currently these rates are hardcoded in arch/avr32/mach-at32ap/at32ap700x.c.

This patch moves them into board specific code.

Signed-off-by: Alex Raimondi <raimondi@miromico.ch>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/boards/atngw100/setup.c      | 7 +++++++
 arch/avr32/boards/atstk1000/atstk1002.c | 6 ++++++
 arch/avr32/boards/atstk1000/atstk1003.c | 7 +++++++
 arch/avr32/boards/atstk1000/atstk1004.c | 7 +++++++
 arch/avr32/mach-at32ap/at32ap700x.c     | 9 +--------
 5 files changed, 28 insertions(+), 8 deletions(-)

(limited to 'arch/avr32')

diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index a398be2..00ce961 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -25,6 +25,13 @@
 #include <asm/arch/init.h>
 #include <asm/arch/portmux.h>
 
+/* Oscillator frequencies. These are board-specific */
+unsigned long at32_board_osc_rates[3] = {
+	[0] = 32768,	/* 32.768 kHz on RTC osc */
+	[1] = 20000000,	/* 20 MHz on osc0 */
+	[2] = 12000000,	/* 12 MHz on osc1 */
+};
+
 /* Initialized by bootloader-specific startup code. */
 struct tag *bootloader_tags __initdata;
 
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index 000eb42..0e13326 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -28,6 +28,12 @@
 
 #include "atstk1000.h"
 
+/* Oscillator frequencies. These are board specific */
+unsigned long at32_board_osc_rates[3] = {
+	[0] = 32768,	/* 32.768 kHz on RTC osc */
+	[1] = 20000000,	/* 20 MHz on osc0 */
+	[2] = 12000000,	/* 12 MHz on osc1 */
+};
 
 struct eth_addr {
 	u8 addr[6];
diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
index a0b223d..ea109f4 100644
--- a/arch/avr32/boards/atstk1000/atstk1003.c
+++ b/arch/avr32/boards/atstk1000/atstk1003.c
@@ -27,6 +27,13 @@
 
 #include "atstk1000.h"
 
+/* Oscillator frequencies. These are board specific */
+unsigned long at32_board_osc_rates[3] = {
+	[0] = 32768,	/* 32.768 kHz on RTC osc */
+	[1] = 20000000,	/* 20 MHz on osc0 */
+	[2] = 12000000,	/* 12 MHz on osc1 */
+};
+
 #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
 static struct at73c213_board_info at73c213_data = {
 	.ssc_id		= 0,
diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
index e765a86..cbf09dd 100644
--- a/arch/avr32/boards/atstk1000/atstk1004.c
+++ b/arch/avr32/boards/atstk1000/atstk1004.c
@@ -29,6 +29,13 @@
 
 #include "atstk1000.h"
 
+/* Oscillator frequencies. These are board specific */
+unsigned long at32_board_osc_rates[3] = {
+	[0] = 32768,	/* 32.768 kHz on RTC osc */
+	[1] = 20000000,	/* 20 MHz on osc0 */
+	[2] = 12000000,	/* 12 MHz on osc1 */
+};
+
 #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
 static struct at73c213_board_info at73c213_data = {
 	.ssc_id		= 0,
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 0f24b4f8..34b56de 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -93,19 +93,12 @@ static struct clk devname##_##_name = {				\
 
 static DEFINE_SPINLOCK(pm_lock);
 
-unsigned long at32ap7000_osc_rates[3] = {
-	[0] = 32768,
-	/* FIXME: these are ATSTK1002-specific */
-	[1] = 20000000,
-	[2] = 12000000,
-};
-
 static struct clk osc0;
 static struct clk osc1;
 
 static unsigned long osc_get_rate(struct clk *clk)
 {
-	return at32ap7000_osc_rates[clk->index];
+	return at32_board_osc_rates[clk->index];
 }
 
 static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
-- 
cgit v1.1


From 7c1b90a1e964f72bde88511e5cfe1c04318ff3d1 Mon Sep 17 00:00:00 2001
From: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Date: Wed, 28 May 2008 20:50:07 +0200
Subject: avr32: Fix sigaltstack behaviour

A signal handler should be able to change the signal stack used for the
next signal by altering the ucontext_t passed as a parameter to the
handler. This does not currently work on avr32 since it doesn't update
the in-kernel signal context from the ucontext_t upon signal handler
return.

Fix it by adding a call to do_sigaltstack() from sys_rt_sigreturn(),
bringing it in line with most other architectures.

Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
[haavard.skinnemoen@atmel.com: changed patch description]
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/kernel/signal.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch/avr32')

diff --git a/arch/avr32/kernel/signal.c b/arch/avr32/kernel/signal.c
index 5616a00..c5b11f9 100644
--- a/arch/avr32/kernel/signal.c
+++ b/arch/avr32/kernel/signal.c
@@ -93,6 +93,9 @@ asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
 	if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
 		goto badframe;
 
+	if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT)
+		goto badframe;
+
 	pr_debug("Context restored: pc = %08lx, lr = %08lx, sp = %08lx\n",
 		 regs->pc, regs->lr, regs->sp);
 
-- 
cgit v1.1


From c1f24ac99f3711a6caa0e1d1c01a071ed72a7e0b Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Mon, 9 Jun 2008 14:16:06 +0200
Subject: avr32: Fix wrong I/O access size in __raw_readsb

__raw_readsb() should always use byte accesses, never halfword accesses,
to I/O memory.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/lib/io-readsb.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/avr32')

diff --git a/arch/avr32/lib/io-readsb.S b/arch/avr32/lib/io-readsb.S
index 2be5da7..cb2d869 100644
--- a/arch/avr32/lib/io-readsb.S
+++ b/arch/avr32/lib/io-readsb.S
@@ -41,7 +41,7 @@ __raw_readsb:
 2:	sub	r10, -4
 	reteq	r12
 
-3:	ld.uh	r8, r12[0]
+3:	ld.ub	r8, r12[0]
 	sub	r10, 1
 	st.b	r11++, r8
 	brne	3b
-- 
cgit v1.1


From aafafddb01e259cff61b3d3f5b3466f0a6a65b84 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Tue, 10 Jun 2008 13:55:52 +0200
Subject: avr32: minor GPIO handling updates

On the odd chance some code uses a pin as a GPIO IRQ without calling
gpio_request() or gpio_direction_input(), the debug dump should still
show its pin status.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/mach-at32ap/pio.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch/avr32')

diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
index 38a8fa3..60da03b 100644
--- a/arch/avr32/mach-at32ap/pio.c
+++ b/arch/avr32/mach-at32ap/pio.c
@@ -318,6 +318,8 @@ static void pio_bank_show(struct seq_file *s, struct gpio_chip *chip)
 		const char *label;
 
 		label = gpiochip_is_requested(chip, i);
+		if (!label && (imr & mask))
+			label = "[irq]";
 		if (!label)
 			continue;
 
-- 
cgit v1.1


From 47882cf620bcd7b014f6f7fc11be8c045787adac Mon Sep 17 00:00:00 2001
From: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
Date: Tue, 5 Feb 2008 15:27:16 +0100
Subject: avr32: Add pin configuration choice to LCDC peripheral

This patch lets the board code choose which pin out to use for the LCD
interface.

On AT32AP7000 the LCDC is wired to two sets of pins, which lets the user
choose between dual ethernet and 32-bit EBI. For the ATNGW100 board it
is vital to have the choice to select the alternative pinout since this
pinout is routed to the external headers.

Update ATSTK1002 and ATSTK1004 to use the new interface.

Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/boards/atstk1000/atstk1002.c |   2 +-
 arch/avr32/boards/atstk1000/atstk1004.c |   2 +-
 arch/avr32/mach-at32ap/at32ap700x.c     | 105 ++++++++++++++++++++++----------
 3 files changed, 75 insertions(+), 34 deletions(-)

(limited to 'arch/avr32')

diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index 0e13326..86b363c 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -238,7 +238,7 @@ static int __init atstk1002_init(void)
 	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
 #else
 	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
-			     fbmem_start, fbmem_size);
+			     fbmem_start, fbmem_size, 0);
 #endif
 	at32_add_device_usba(0, NULL);
 #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
index cbf09dd..c7236df 100644
--- a/arch/avr32/boards/atstk1000/atstk1004.c
+++ b/arch/avr32/boards/atstk1000/atstk1004.c
@@ -140,7 +140,7 @@ static int __init atstk1004_init(void)
 	at32_add_device_mci(0);
 #endif
 	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
-			     fbmem_start, fbmem_size);
+			     fbmem_start, fbmem_size, 0);
 	at32_add_device_usba(0, NULL);
 #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
 	at32_add_device_ssc(0, ATMEL_SSC_TX);
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 34b56de..08115f9 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1257,7 +1257,8 @@ static struct clk atmel_lcdfb0_pixclk = {
 
 struct platform_device *__init
 at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
-		     unsigned long fbmem_start, unsigned long fbmem_len)
+		     unsigned long fbmem_start, unsigned long fbmem_len,
+		     unsigned int pin_config)
 {
 	struct platform_device *pdev;
 	struct atmel_lcdfb_info *info;
@@ -1284,37 +1285,77 @@ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
 	switch (id) {
 	case 0:
 		pdev = &atmel_lcdfb0_device;
-		select_peripheral(PC(19), PERIPH_A, 0);	/* CC	  */
-		select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
-		select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
-		select_peripheral(PC(22), PERIPH_A, 0);	/* VSYNC  */
-		select_peripheral(PC(23), PERIPH_A, 0);	/* DVAL	  */
-		select_peripheral(PC(24), PERIPH_A, 0);	/* MODE	  */
-		select_peripheral(PC(25), PERIPH_A, 0);	/* PWR	  */
-		select_peripheral(PC(26), PERIPH_A, 0);	/* DATA0  */
-		select_peripheral(PC(27), PERIPH_A, 0);	/* DATA1  */
-		select_peripheral(PC(28), PERIPH_A, 0);	/* DATA2  */
-		select_peripheral(PC(29), PERIPH_A, 0);	/* DATA3  */
-		select_peripheral(PC(30), PERIPH_A, 0);	/* DATA4  */
-		select_peripheral(PC(31), PERIPH_A, 0);	/* DATA5  */
-		select_peripheral(PD(0),  PERIPH_A, 0);	/* DATA6  */
-		select_peripheral(PD(1),  PERIPH_A, 0);	/* DATA7  */
-		select_peripheral(PD(2),  PERIPH_A, 0);	/* DATA8  */
-		select_peripheral(PD(3),  PERIPH_A, 0);	/* DATA9  */
-		select_peripheral(PD(4),  PERIPH_A, 0);	/* DATA10 */
-		select_peripheral(PD(5),  PERIPH_A, 0);	/* DATA11 */
-		select_peripheral(PD(6),  PERIPH_A, 0);	/* DATA12 */
-		select_peripheral(PD(7),  PERIPH_A, 0);	/* DATA13 */
-		select_peripheral(PD(8),  PERIPH_A, 0);	/* DATA14 */
-		select_peripheral(PD(9),  PERIPH_A, 0);	/* DATA15 */
-		select_peripheral(PD(10), PERIPH_A, 0);	/* DATA16 */
-		select_peripheral(PD(11), PERIPH_A, 0);	/* DATA17 */
-		select_peripheral(PD(12), PERIPH_A, 0);	/* DATA18 */
-		select_peripheral(PD(13), PERIPH_A, 0);	/* DATA19 */
-		select_peripheral(PD(14), PERIPH_A, 0);	/* DATA20 */
-		select_peripheral(PD(15), PERIPH_A, 0);	/* DATA21 */
-		select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
-		select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
+
+		switch (pin_config) {
+		case 0:
+			select_peripheral(PC(19), PERIPH_A, 0);	/* CC	  */
+			select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
+			select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
+			select_peripheral(PC(22), PERIPH_A, 0);	/* VSYNC  */
+			select_peripheral(PC(23), PERIPH_A, 0);	/* DVAL	  */
+			select_peripheral(PC(24), PERIPH_A, 0);	/* MODE	  */
+			select_peripheral(PC(25), PERIPH_A, 0);	/* PWR	  */
+			select_peripheral(PC(26), PERIPH_A, 0);	/* DATA0  */
+			select_peripheral(PC(27), PERIPH_A, 0);	/* DATA1  */
+			select_peripheral(PC(28), PERIPH_A, 0);	/* DATA2  */
+			select_peripheral(PC(29), PERIPH_A, 0);	/* DATA3  */
+			select_peripheral(PC(30), PERIPH_A, 0);	/* DATA4  */
+			select_peripheral(PC(31), PERIPH_A, 0);	/* DATA5  */
+			select_peripheral(PD(0),  PERIPH_A, 0);	/* DATA6  */
+			select_peripheral(PD(1),  PERIPH_A, 0);	/* DATA7  */
+			select_peripheral(PD(2),  PERIPH_A, 0);	/* DATA8  */
+			select_peripheral(PD(3),  PERIPH_A, 0);	/* DATA9  */
+			select_peripheral(PD(4),  PERIPH_A, 0);	/* DATA10 */
+			select_peripheral(PD(5),  PERIPH_A, 0);	/* DATA11 */
+			select_peripheral(PD(6),  PERIPH_A, 0);	/* DATA12 */
+			select_peripheral(PD(7),  PERIPH_A, 0);	/* DATA13 */
+			select_peripheral(PD(8),  PERIPH_A, 0);	/* DATA14 */
+			select_peripheral(PD(9),  PERIPH_A, 0);	/* DATA15 */
+			select_peripheral(PD(10), PERIPH_A, 0);	/* DATA16 */
+			select_peripheral(PD(11), PERIPH_A, 0);	/* DATA17 */
+			select_peripheral(PD(12), PERIPH_A, 0);	/* DATA18 */
+			select_peripheral(PD(13), PERIPH_A, 0);	/* DATA19 */
+			select_peripheral(PD(14), PERIPH_A, 0);	/* DATA20 */
+			select_peripheral(PD(15), PERIPH_A, 0);	/* DATA21 */
+			select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
+			select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
+			break;
+		case 1:
+			select_peripheral(PE(0),  PERIPH_B, 0);	/* CC	  */
+			select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
+			select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
+			select_peripheral(PC(22), PERIPH_A, 0);	/* VSYNC  */
+			select_peripheral(PE(1),  PERIPH_B, 0);	/* DVAL	  */
+			select_peripheral(PE(2),  PERIPH_B, 0);	/* MODE	  */
+			select_peripheral(PC(25), PERIPH_A, 0);	/* PWR	  */
+			select_peripheral(PE(3),  PERIPH_B, 0);	/* DATA0  */
+			select_peripheral(PE(4),  PERIPH_B, 0);	/* DATA1  */
+			select_peripheral(PE(5),  PERIPH_B, 0);	/* DATA2  */
+			select_peripheral(PE(6),  PERIPH_B, 0);	/* DATA3  */
+			select_peripheral(PE(7),  PERIPH_B, 0);	/* DATA4  */
+			select_peripheral(PC(31), PERIPH_A, 0);	/* DATA5  */
+			select_peripheral(PD(0),  PERIPH_A, 0);	/* DATA6  */
+			select_peripheral(PD(1),  PERIPH_A, 0);	/* DATA7  */
+			select_peripheral(PE(8),  PERIPH_B, 0);	/* DATA8  */
+			select_peripheral(PE(9),  PERIPH_B, 0);	/* DATA9  */
+			select_peripheral(PE(10), PERIPH_B, 0);	/* DATA10 */
+			select_peripheral(PE(11), PERIPH_B, 0);	/* DATA11 */
+			select_peripheral(PE(12), PERIPH_B, 0);	/* DATA12 */
+			select_peripheral(PD(7),  PERIPH_A, 0);	/* DATA13 */
+			select_peripheral(PD(8),  PERIPH_A, 0);	/* DATA14 */
+			select_peripheral(PD(9),  PERIPH_A, 0);	/* DATA15 */
+			select_peripheral(PE(13), PERIPH_B, 0);	/* DATA16 */
+			select_peripheral(PE(14), PERIPH_B, 0);	/* DATA17 */
+			select_peripheral(PE(15), PERIPH_B, 0);	/* DATA18 */
+			select_peripheral(PE(16), PERIPH_B, 0);	/* DATA19 */
+			select_peripheral(PE(17), PERIPH_B, 0);	/* DATA20 */
+			select_peripheral(PE(18), PERIPH_B, 0);	/* DATA21 */
+			select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
+			select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
+			break;
+		default:
+			goto err_invalid_id;
+		}
 
 		clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
 		clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
-- 
cgit v1.1


From d86d314f67191011e6f494f6517b8cbd7dd3dc39 Mon Sep 17 00:00:00 2001
From: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
Date: Mon, 25 Feb 2008 11:24:30 +0100
Subject: avr32: Add PSIF platform devices

This patch adds the PS/2 interface (PSIF) to the device code, split into
two platform devices, one for each port.

The function for adding the PSIF platform device is also added to the
board header file.

Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/mach-at32ap/at32ap700x.c | 77 +++++++++++++++++++++++++++++++++++++
 1 file changed, 77 insertions(+)

(limited to 'arch/avr32')

diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 08115f9..a9ae7bb 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -834,6 +834,81 @@ void __init at32_add_system_devices(void)
 }
 
 /* --------------------------------------------------------------------
+ *  PSIF
+ * -------------------------------------------------------------------- */
+static struct resource atmel_psif0_resource[] __initdata = {
+	{
+		.start	= 0xffe03c00,
+		.end	= 0xffe03cff,
+		.flags	= IORESOURCE_MEM,
+	},
+	IRQ(18),
+};
+static struct clk atmel_psif0_pclk = {
+	.name		= "pclk",
+	.parent		= &pba_clk,
+	.mode		= pba_clk_mode,
+	.get_rate	= pba_clk_get_rate,
+	.index		= 15,
+};
+
+static struct resource atmel_psif1_resource[] __initdata = {
+	{
+		.start	= 0xffe03d00,
+		.end	= 0xffe03dff,
+		.flags	= IORESOURCE_MEM,
+	},
+	IRQ(18),
+};
+static struct clk atmel_psif1_pclk = {
+	.name		= "pclk",
+	.parent		= &pba_clk,
+	.mode		= pba_clk_mode,
+	.get_rate	= pba_clk_get_rate,
+	.index		= 15,
+};
+
+struct platform_device *__init at32_add_device_psif(unsigned int id)
+{
+	struct platform_device *pdev;
+
+	if (!(id == 0 || id == 1))
+		return NULL;
+
+	pdev = platform_device_alloc("atmel_psif", id);
+	if (!pdev)
+		return NULL;
+
+	switch (id) {
+	case 0:
+		if (platform_device_add_resources(pdev, atmel_psif0_resource,
+					ARRAY_SIZE(atmel_psif0_resource)))
+			goto err_add_resources;
+		atmel_psif0_pclk.dev = &pdev->dev;
+		select_peripheral(PA(8), PERIPH_A, 0); /* CLOCK */
+		select_peripheral(PA(9), PERIPH_A, 0); /* DATA  */
+		break;
+	case 1:
+		if (platform_device_add_resources(pdev, atmel_psif1_resource,
+					ARRAY_SIZE(atmel_psif1_resource)))
+			goto err_add_resources;
+		atmel_psif1_pclk.dev = &pdev->dev;
+		select_peripheral(PB(11), PERIPH_A, 0); /* CLOCK */
+		select_peripheral(PB(12), PERIPH_A, 0); /* DATA  */
+		break;
+	default:
+		return NULL;
+	}
+
+	platform_device_add(pdev);
+	return pdev;
+
+err_add_resources:
+	platform_device_put(pdev);
+	return NULL;
+}
+
+/* --------------------------------------------------------------------
  *  USART
  * -------------------------------------------------------------------- */
 
@@ -1934,6 +2009,8 @@ struct clk *at32_clock_list[] = {
 	&pio4_mck,
 	&at32_tcb0_t0_clk,
 	&at32_tcb1_t0_clk,
+	&atmel_psif0_pclk,
+	&atmel_psif1_pclk,
 	&atmel_usart0_usart,
 	&atmel_usart1_usart,
 	&atmel_usart2_usart,
-- 
cgit v1.1


From 7ef31e9c4e711bfb817a15b54e428e5c4a7c0032 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Thu, 12 Jun 2008 12:18:05 -0700
Subject: avr32: improve NGW100 I2C/PMBus setup

Basic I2C initialization for the NGW100 board:

  - Provide empty i2c device table. Daughtercards may add devices,
    and the ATtiny24 could do stuff too.

  - Set up EXTINT(3) so the ATtiny24 can interrupt the AP7000.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/boards/atngw100/setup.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

(limited to 'arch/avr32')

diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index 00ce961..a51bb9f 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -9,6 +9,8 @@
  */
 #include <linux/clk.h>
 #include <linux/etherdevice.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 #include <linux/init.h>
 #include <linux/linkage.h>
@@ -147,6 +149,10 @@ static struct platform_device i2c_gpio_device = {
 	},
 };
 
+static struct i2c_board_info __initdata i2c_info[] = {
+	/* NOTE:  original ATtiny24 firmware is at address 0x0b */
+};
+
 static int __init atngw100_init(void)
 {
 	unsigned	i;
@@ -172,12 +178,28 @@ static int __init atngw100_init(void)
 	}
 	platform_device_register(&ngw_gpio_leds);
 
+	/* all these i2c/smbus pins should have external pullups for
+	 * open-drain sharing among all I2C devices.  SDA and SCL do;
+	 * PB28/EXTINT3 doesn't; it should be SMBALERT# (for PMBus),
+	 * but it's not available off-board.
+	 */
+	at32_select_periph(GPIO_PIN_PB(28), 0, AT32_GPIOF_PULLUP);
 	at32_select_gpio(i2c_gpio_data.sda_pin,
 		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
 	at32_select_gpio(i2c_gpio_data.scl_pin,
 		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
 	platform_device_register(&i2c_gpio_device);
+	i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info));
 
 	return 0;
 }
 postcore_initcall(atngw100_init);
+
+static int __init atngw100_arch_init(void)
+{
+	/* set_irq_type() after the arch_initcall for EIC has run, and
+	 * before the I2C subsystem could try using this IRQ.
+	 */
+	return set_irq_type(AT32_EXTINT(3), IRQ_TYPE_EDGE_FALLING);
+}
+arch_initcall(atngw100_arch_init);
-- 
cgit v1.1


From 9c2baf785e90419d6f9af6bd07aa0694020cba8d Mon Sep 17 00:00:00 2001
From: David Brownell <david-b@pacbell.net>
Date: Wed, 18 Jun 2008 02:31:43 -0700
Subject: at32ap700x spi: enable pullups on MISO

This is a minor tweak to the at32ap700x pin configuration for the SPI
input pin (MISO), enabling the on-chip weak pullup (typical 190K) to

  (a) ensure a fixed data value for missing or input-only slaves;

  (b) prevent power waste associated with inputs floating near VDDIO/2.

Atmel's boards have no external pullup or pulldown on these pins, so
it's unlikely other boards would address these issues with external
pulldowns.  Were there trouble, board-specific code could turn off
the relevant pullup(s).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/mach-at32ap/at32ap700x.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch/avr32')

diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index a9ae7bb..a2e7b96 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1181,7 +1181,8 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
 	switch (id) {
 	case 0:
 		pdev = &atmel_spi0_device;
-		select_peripheral(PA(0),  PERIPH_A, 0);	/* MISO	 */
+		/* pullup MISO so a level is always defined */
+		select_peripheral(PA(0),  PERIPH_A, AT32_GPIOF_PULLUP);
 		select_peripheral(PA(1),  PERIPH_A, 0);	/* MOSI	 */
 		select_peripheral(PA(2),  PERIPH_A, 0);	/* SCK	 */
 		at32_spi_setup_slaves(0, b, n, spi0_pins);
@@ -1189,7 +1190,8 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
 
 	case 1:
 		pdev = &atmel_spi1_device;
-		select_peripheral(PB(0),  PERIPH_B, 0);	/* MISO  */
+		/* pullup MISO so a level is always defined */
+		select_peripheral(PB(0),  PERIPH_B, AT32_GPIOF_PULLUP);
 		select_peripheral(PB(1),  PERIPH_B, 0);	/* MOSI  */
 		select_peripheral(PB(5),  PERIPH_B, 0);	/* SCK   */
 		at32_spi_setup_slaves(1, b, n, spi1_pins);
-- 
cgit v1.1


From 8405996ff6d89bbf275a206eb69d10b98a8d5257 Mon Sep 17 00:00:00 2001
From: Sedji Gaouaou <sedji.gaouaou@atmel.com>
Date: Wed, 25 Jun 2008 10:32:50 +0200
Subject: atmel_pwm: Rename the "mck" clock to "pwm_clk"

The name "mck" causes a conflict on AT91. Call it "pwm_clk" instead.

Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/mach-at32ap/at32ap700x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/avr32')

diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index a2e7b96..2f208eb 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1471,7 +1471,7 @@ static struct resource atmel_pwm0_resource[] __initdata = {
 	IRQ(24),
 };
 static struct clk atmel_pwm0_mck = {
-	.name		= "mck",
+	.name		= "pwm_clk",
 	.parent		= &pbb_clk,
 	.mode		= pbb_clk_mode,
 	.get_rate	= pbb_clk_get_rate,
-- 
cgit v1.1


From 9dbef285a359c9bf6f04f907bdfb9f35f37a8513 Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Wed, 28 May 2008 13:07:40 +0200
Subject: avr32: Clean up time.c #includes

Remove lots of unneeded #includes, add #include <linux/kernel.h> and
sort alphabetically.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/kernel/time.c | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

(limited to 'arch/avr32')

diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c
index 00a9862..abd954f 100644
--- a/arch/avr32/kernel/time.c
+++ b/arch/avr32/kernel/time.c
@@ -7,21 +7,13 @@
  */
 #include <linux/clk.h>
 #include <linux/clockchips.h>
-#include <linux/time.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/profile.h>
-#include <linux/sysdev.h>
-#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
 
-#include <asm/div64.h>
 #include <asm/sysreg.h>
-#include <asm/io.h>
-#include <asm/sections.h>
 
 #include <asm/arch/pm.h>
 
-- 
cgit v1.1


From d704fb0cc0cce474ac959adca6c3d1f606fcfa2a Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Mon, 14 Jan 2008 21:42:56 +0100
Subject: avr32: Kill special exception handler sections

Kill the special exception handler sections .tlbx.ex.text,
.tlbr.ex.text, tlbw.ex.text and .scall.text. Use .org instead to place
the handlers at the required offsets from EVBA.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/kernel/entry-avr32b.S | 9 +++++----
 arch/avr32/kernel/vmlinux.lds.S  | 8 --------
 2 files changed, 5 insertions(+), 12 deletions(-)

(limited to 'arch/avr32')

diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S
index 5f31702..050c006 100644
--- a/arch/avr32/kernel/entry-avr32b.S
+++ b/arch/avr32/kernel/entry-avr32b.S
@@ -83,22 +83,23 @@ exception_vectors:
 #define	tlbmiss_save	pushm	r0-r3
 #define tlbmiss_restore	popm	r0-r3
 
-	.section .tlbx.ex.text,"ax",@progbits
+	.org	0x50
 	.global	itlb_miss
 itlb_miss:
 	tlbmiss_save
 	rjmp	tlb_miss_common
 
-	.section .tlbr.ex.text,"ax",@progbits
+	.org	0x60
 dtlb_miss_read:
 	tlbmiss_save
 	rjmp	tlb_miss_common
 
-	.section .tlbw.ex.text,"ax",@progbits
+	.org	0x70
 dtlb_miss_write:
 	tlbmiss_save
 
 	.global	tlb_miss_common
+	.align	2
 tlb_miss_common:
 	mfsr	r0, SYSREG_TLBEAR
 	mfsr	r1, SYSREG_PTBR
@@ -157,7 +158,7 @@ handle_vmalloc_miss:
 
 	/* ---                    System Call                    --- */
 
-	.section .scall.text,"ax",@progbits
+	.org	0x100
 system_call:
 #ifdef CONFIG_PREEMPT
 	mask_interrupts
diff --git a/arch/avr32/kernel/vmlinux.lds.S b/arch/avr32/kernel/vmlinux.lds.S
index 481cfd4..033dd46 100644
--- a/arch/avr32/kernel/vmlinux.lds.S
+++ b/arch/avr32/kernel/vmlinux.lds.S
@@ -68,14 +68,6 @@ SECTIONS
 		_evba = .;
 		_text = .;
 		*(.ex.text)
-		. = 0x50;
-		*(.tlbx.ex.text)
-		. = 0x60;
-		*(.tlbr.ex.text)
-		. = 0x70;
-		*(.tlbw.ex.text)
-		. = 0x100;
-		*(.scall.text)
 		*(.irq.text)
 		KPROBES_TEXT
 		TEXT_TEXT
-- 
cgit v1.1


From 65033ed740ef06eddf9fde7a992eab336cbddd56 Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date: Tue, 4 Mar 2008 15:15:00 +0100
Subject: avr32: Move setup_platform() into chip-specific file

Combine at32_clock_init() and at32_portmux_init() into
setup_platform() and remove setup_platform() from at32ap.c. No
functional change since all setup_platform() ever did was call those
two functions.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
---
 arch/avr32/mach-at32ap/at32ap.c     |  8 --------
 arch/avr32/mach-at32ap/at32ap700x.c | 18 ++++++++----------
 2 files changed, 8 insertions(+), 18 deletions(-)

(limited to 'arch/avr32')

diff --git a/arch/avr32/mach-at32ap/at32ap.c b/arch/avr32/mach-at32ap/at32ap.c
index 7c4987f..1040bda 100644
--- a/arch/avr32/mach-at32ap/at32ap.c
+++ b/arch/avr32/mach-at32ap/at32ap.c
@@ -11,14 +11,6 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/init.h>
-
-void __init setup_platform(void)
-{
-	at32_clock_init();
-	at32_portmux_init();
-}
-
 static int __init pdc_probe(struct platform_device *pdev)
 {
 	struct clk *pclk, *hclk;
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 2f208eb..baf4680 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -2048,16 +2048,7 @@ struct clk *at32_clock_list[] = {
 };
 unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
 
-void __init at32_portmux_init(void)
-{
-	at32_init_pio(&pio0_device);
-	at32_init_pio(&pio1_device);
-	at32_init_pio(&pio2_device);
-	at32_init_pio(&pio3_device);
-	at32_init_pio(&pio4_device);
-}
-
-void __init at32_clock_init(void)
+void __init setup_platform(void)
 {
 	u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
 	int i;
@@ -2112,4 +2103,11 @@ void __init at32_clock_init(void)
 	pm_writel(HSB_MASK, hsb_mask);
 	pm_writel(PBA_MASK, pba_mask);
 	pm_writel(PBB_MASK, pbb_mask);
+
+	/* Initialize the port muxes */
+	at32_init_pio(&pio0_device);
+	at32_init_pio(&pio1_device);
+	at32_init_pio(&pio2_device);
+	at32_init_pio(&pio3_device);
+	at32_init_pio(&pio4_device);
 }
-- 
cgit v1.1


From d7ff2a4a28ceadc03df2f5a20897165fda306382 Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date: Tue, 4 Mar 2008 15:16:57 +0100
Subject: avr32: Rename at32ap.c -> pdc.c

The only thing left in at32ap.c is some PDC stuff. Rename the file to
reflect what it actually does.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
---
 arch/avr32/mach-at32ap/Makefile |  2 +-
 arch/avr32/mach-at32ap/at32ap.c | 48 -----------------------------------------
 arch/avr32/mach-at32ap/pdc.c    | 48 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 49 insertions(+), 49 deletions(-)
 delete mode 100644 arch/avr32/mach-at32ap/at32ap.c
 create mode 100644 arch/avr32/mach-at32ap/pdc.c

(limited to 'arch/avr32')

diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile
index e890094..cb44182 100644
--- a/arch/avr32/mach-at32ap/Makefile
+++ b/arch/avr32/mach-at32ap/Makefile
@@ -1,3 +1,3 @@
-obj-y				+= at32ap.o clock.o intc.o extint.o pio.o hsmc.o
+obj-y				+= pdc.o clock.o intc.o extint.o pio.o hsmc.o
 obj-$(CONFIG_CPU_AT32AP700X)	+= at32ap700x.o pm-at32ap700x.o
 obj-$(CONFIG_CPU_FREQ_AT32AP)	+= cpufreq.o
diff --git a/arch/avr32/mach-at32ap/at32ap.c b/arch/avr32/mach-at32ap/at32ap.c
deleted file mode 100644
index 1040bda..0000000
--- a/arch/avr32/mach-at32ap/at32ap.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-static int __init pdc_probe(struct platform_device *pdev)
-{
-	struct clk *pclk, *hclk;
-
-	pclk = clk_get(&pdev->dev, "pclk");
-	if (IS_ERR(pclk)) {
-		dev_err(&pdev->dev, "no pclk defined\n");
-		return PTR_ERR(pclk);
-	}
-	hclk = clk_get(&pdev->dev, "hclk");
-	if (IS_ERR(hclk)) {
-		dev_err(&pdev->dev, "no hclk defined\n");
-		clk_put(pclk);
-		return PTR_ERR(hclk);
-	}
-
-	clk_enable(pclk);
-	clk_enable(hclk);
-
-	dev_info(&pdev->dev, "Atmel Peripheral DMA Controller enabled\n");
-	return 0;
-}
-
-static struct platform_driver pdc_driver = {
-	.probe		= pdc_probe,
-	.driver		= {
-		.name	= "pdc",
-	},
-};
-
-static int __init pdc_init(void)
-{
-	return platform_driver_register(&pdc_driver);
-}
-arch_initcall(pdc_init);
diff --git a/arch/avr32/mach-at32ap/pdc.c b/arch/avr32/mach-at32ap/pdc.c
new file mode 100644
index 0000000..1040bda
--- /dev/null
+++ b/arch/avr32/mach-at32ap/pdc.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+static int __init pdc_probe(struct platform_device *pdev)
+{
+	struct clk *pclk, *hclk;
+
+	pclk = clk_get(&pdev->dev, "pclk");
+	if (IS_ERR(pclk)) {
+		dev_err(&pdev->dev, "no pclk defined\n");
+		return PTR_ERR(pclk);
+	}
+	hclk = clk_get(&pdev->dev, "hclk");
+	if (IS_ERR(hclk)) {
+		dev_err(&pdev->dev, "no hclk defined\n");
+		clk_put(pclk);
+		return PTR_ERR(hclk);
+	}
+
+	clk_enable(pclk);
+	clk_enable(hclk);
+
+	dev_info(&pdev->dev, "Atmel Peripheral DMA Controller enabled\n");
+	return 0;
+}
+
+static struct platform_driver pdc_driver = {
+	.probe		= pdc_probe,
+	.driver		= {
+		.name	= "pdc",
+	},
+};
+
+static int __init pdc_init(void)
+{
+	return platform_driver_register(&pdc_driver);
+}
+arch_initcall(pdc_init);
-- 
cgit v1.1


From b13d618b44fefea7529bd467e55423d353a599fc Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Tue, 15 May 2007 15:06:41 +0200
Subject: avr32: Clean up and optimize the TLB operations

This and the following patches aim to optimize the code dealing with
page tables and TLB operations. Each patch reduces the time it takes
to gzip a 16 MB file slightly, but I expect things like fork() and
mmap() will improve somewhat more.

This patch deals with the low-level TLB operations:

  * Remove unused _TLBEHI_I define
  * Use gcc builtins instead of inline assembly
  * Remove a few unnecessary pipeline flushes and nops
  * Introduce NR_TLB_ENTRIES define and use it instead of hardcoding it
    to 32 a few places throughout the code.
  * Use sysreg bitops instead of hardcoded shifts and masks
  * Make a few needlessly global functions static

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/mm/tlb.c | 175 ++++++++++++++++++++++++++--------------------------
 1 file changed, 87 insertions(+), 88 deletions(-)

(limited to 'arch/avr32')

diff --git a/arch/avr32/mm/tlb.c b/arch/avr32/mm/tlb.c
index cd12edb..06677be 100644
--- a/arch/avr32/mm/tlb.c
+++ b/arch/avr32/mm/tlb.c
@@ -11,21 +11,21 @@
 
 #include <asm/mmu_context.h>
 
-#define _TLBEHI_I	0x100
+/* TODO: Get the correct number from the CONFIG1 system register */
+#define NR_TLB_ENTRIES 32
 
-void show_dtlb_entry(unsigned int index)
+static void show_dtlb_entry(unsigned int index)
 {
-	unsigned int tlbehi, tlbehi_save, tlbelo, mmucr, mmucr_save;
+	u32 tlbehi, tlbehi_save, tlbelo, mmucr, mmucr_save;
 	unsigned long flags;
 
 	local_irq_save(flags);
 	mmucr_save = sysreg_read(MMUCR);
 	tlbehi_save = sysreg_read(TLBEHI);
-	mmucr = mmucr_save & 0x13;
-	mmucr |= index << 14;
+	mmucr = SYSREG_BFINS(DRP, index, mmucr_save);
 	sysreg_write(MMUCR, mmucr);
 
-	asm volatile("tlbr" : : : "memory");
+	__builtin_tlbr();
 	cpu_sync_pipeline();
 
 	tlbehi = sysreg_read(TLBEHI);
@@ -33,15 +33,17 @@ void show_dtlb_entry(unsigned int index)
 
 	printk("%2u: %c %c %02x   %05x %05x %o  %o  %c %c %c %c\n",
 	       index,
-	       (tlbehi & 0x200)?'1':'0',
-	       (tlbelo & 0x100)?'1':'0',
-	       (tlbehi & 0xff),
-	       (tlbehi >> 12), (tlbelo >> 12),
-	       (tlbelo >> 4) & 7, (tlbelo >> 2) & 3,
-	       (tlbelo & 0x200)?'1':'0',
-	       (tlbelo & 0x080)?'1':'0',
-	       (tlbelo & 0x001)?'1':'0',
-	       (tlbelo & 0x002)?'1':'0');
+	       SYSREG_BFEXT(TLBEHI_V, tlbehi) ? '1' : '0',
+	       SYSREG_BFEXT(G, tlbelo) ? '1' : '0',
+	       SYSREG_BFEXT(ASID, tlbehi),
+	       SYSREG_BFEXT(VPN, tlbehi) >> 2,
+	       SYSREG_BFEXT(PFN, tlbelo) >> 2,
+	       SYSREG_BFEXT(AP, tlbelo),
+	       SYSREG_BFEXT(SZ, tlbelo),
+	       SYSREG_BFEXT(TLBELO_C, tlbelo) ? 'C' : ' ',
+	       SYSREG_BFEXT(B, tlbelo) ? 'B' : ' ',
+	       SYSREG_BFEXT(W, tlbelo) ? 'W' : ' ',
+	       SYSREG_BFEXT(TLBELO_D, tlbelo) ? 'D' : ' ');
 
 	sysreg_write(MMUCR, mmucr_save);
 	sysreg_write(TLBEHI, tlbehi_save);
@@ -54,29 +56,33 @@ void dump_dtlb(void)
 	unsigned int i;
 
 	printk("ID  V G ASID VPN   PFN   AP SZ C B W D\n");
-	for (i = 0; i < 32; i++)
+	for (i = 0; i < NR_TLB_ENTRIES; i++)
 		show_dtlb_entry(i);
 }
 
-static unsigned long last_mmucr;
-
-static inline void set_replacement_pointer(unsigned shift)
+static void update_dtlb(unsigned long address, pte_t pte)
 {
-	unsigned long mmucr, mmucr_save;
+	u32 tlbehi;
+	u32 mmucr;
 
-	mmucr = mmucr_save = sysreg_read(MMUCR);
+	/*
+	 * We're not changing the ASID here, so no need to flush the
+	 * pipeline.
+	 */
+	tlbehi = sysreg_read(TLBEHI);
+	tlbehi = SYSREG_BF(ASID, SYSREG_BFEXT(ASID, tlbehi));
+	tlbehi |= address & MMU_VPN_MASK;
+	tlbehi |= SYSREG_BIT(TLBEHI_V);
+	sysreg_write(TLBEHI, tlbehi);
 
 	/* Does this mapping already exist? */
-	__asm__ __volatile__(
-		"	tlbs\n"
-		"	mfsr %0, %1"
-		: "=r"(mmucr)
-		: "i"(SYSREG_MMUCR));
+	__builtin_tlbs();
+	mmucr = sysreg_read(MMUCR);
 
 	if (mmucr & SYSREG_BIT(MMUCR_N)) {
 		/* Not found -- pick a not-recently-accessed entry */
-		unsigned long rp;
-		unsigned long tlbar = sysreg_read(TLBARLO);
+		unsigned int rp;
+		u32 tlbar = sysreg_read(TLBARLO);
 
 		rp = 32 - fls(tlbar);
 		if (rp == 32) {
@@ -84,30 +90,14 @@ static inline void set_replacement_pointer(unsigned shift)
 			sysreg_write(TLBARLO, -1L);
 		}
 
-		mmucr &= 0x13;
-		mmucr |= (rp << shift);
-
+		mmucr = SYSREG_BFINS(DRP, rp, mmucr);
 		sysreg_write(MMUCR, mmucr);
 	}
 
-	last_mmucr = mmucr;
-}
-
-static void update_dtlb(unsigned long address, pte_t pte, unsigned long asid)
-{
-	unsigned long vpn;
-
-	vpn = (address & MMU_VPN_MASK) | _TLBEHI_VALID | asid;
-	sysreg_write(TLBEHI, vpn);
-	cpu_sync_pipeline();
-
-	set_replacement_pointer(14);
-
 	sysreg_write(TLBELO, pte_val(pte) & _PAGE_FLAGS_HARDWARE_MASK);
 
 	/* Let's go */
-	asm volatile("nop\n\ttlbw" : : : "memory");
-	cpu_sync_pipeline();
+	__builtin_tlbw();
 }
 
 void update_mmu_cache(struct vm_area_struct *vma,
@@ -120,39 +110,40 @@ void update_mmu_cache(struct vm_area_struct *vma,
 		return;
 
 	local_irq_save(flags);
-	update_dtlb(address, pte, get_asid());
+	update_dtlb(address, pte);
 	local_irq_restore(flags);
 }
 
-void __flush_tlb_page(unsigned long asid, unsigned long page)
+static void __flush_tlb_page(unsigned long asid, unsigned long page)
 {
-	unsigned long mmucr, tlbehi;
+	u32 mmucr, tlbehi;
 
-	page |= asid;
-	sysreg_write(TLBEHI, page);
-	cpu_sync_pipeline();
-	asm volatile("tlbs");
+	/*
+	 * Caller is responsible for masking out non-PFN bits in page
+	 * and changing the current ASID if necessary. This means that
+	 * we don't need to flush the pipeline after writing TLBEHI.
+	 */
+	tlbehi = page | asid;
+	sysreg_write(TLBEHI, tlbehi);
+
+	__builtin_tlbs();
 	mmucr = sysreg_read(MMUCR);
 
 	if (!(mmucr & SYSREG_BIT(MMUCR_N))) {
-		unsigned long tlbarlo;
-		unsigned long entry;
+		unsigned int entry;
+		u32 tlbarlo;
 
 		/* Clear the "valid" bit */
-		tlbehi = sysreg_read(TLBEHI);
-		tlbehi &= ~_TLBEHI_VALID;
 		sysreg_write(TLBEHI, tlbehi);
-		cpu_sync_pipeline();
 
 		/* mark the entry as "not accessed" */
-		entry = (mmucr >> 14) & 0x3f;
+		entry = SYSREG_BFEXT(DRP, mmucr);
 		tlbarlo = sysreg_read(TLBARLO);
-		tlbarlo |= (0x80000000 >> entry);
+		tlbarlo |= (0x80000000UL >> entry);
 		sysreg_write(TLBARLO, tlbarlo);
 
 		/* update the entry with valid bit clear */
-		asm volatile("tlbw");
-		cpu_sync_pipeline();
+		__builtin_tlbw();
 	}
 }
 
@@ -190,17 +181,22 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 
 		local_irq_save(flags);
 		size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
+
 		if (size > (MMU_DTLB_ENTRIES / 4)) { /* Too many entries to flush */
 			mm->context = NO_CONTEXT;
 			if (mm == current->mm)
 				activate_context(mm);
 		} else {
-			unsigned long asid = mm->context & MMU_CONTEXT_ASID_MASK;
-			unsigned long saved_asid = MMU_NO_ASID;
+			unsigned long asid;
+			unsigned long saved_asid;
+
+			asid = mm->context & MMU_CONTEXT_ASID_MASK;
+			saved_asid = MMU_NO_ASID;
 
 			start &= PAGE_MASK;
 			end += (PAGE_SIZE - 1);
 			end &= PAGE_MASK;
+
 			if (mm != current->mm) {
 				saved_asid = get_asid();
 				set_asid(asid);
@@ -218,33 +214,34 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 }
 
 /*
- * TODO: If this is only called for addresses > TASK_SIZE, we can probably
- * skip the ASID stuff and just use the Global bit...
+ * This function depends on the pages to be flushed having the G
+ * (global) bit set in their pte. This is true for all
+ * PAGE_KERNEL(_RO) pages.
  */
 void flush_tlb_kernel_range(unsigned long start, unsigned long end)
 {
 	unsigned long flags;
 	int size;
 
-	local_irq_save(flags);
 	size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
 	if (size > (MMU_DTLB_ENTRIES / 4)) { /* Too many entries to flush */
 		flush_tlb_all();
 	} else {
-		unsigned long asid = init_mm.context & MMU_CONTEXT_ASID_MASK;
-		unsigned long saved_asid = get_asid();
+		unsigned long asid;
+
+		local_irq_save(flags);
+		asid = get_asid();
 
 		start &= PAGE_MASK;
 		end += (PAGE_SIZE - 1);
 		end &= PAGE_MASK;
-		set_asid(asid);
+
 		while (start < end) {
 			__flush_tlb_page(asid, start);
 			start += PAGE_SIZE;
 		}
-		set_asid(saved_asid);
+		local_irq_restore(flags);
 	}
-	local_irq_restore(flags);
 }
 
 void flush_tlb_mm(struct mm_struct *mm)
@@ -280,7 +277,7 @@ static void *tlb_start(struct seq_file *tlb, loff_t *pos)
 {
 	static unsigned long tlb_index;
 
-	if (*pos >= 32)
+	if (*pos >= NR_TLB_ENTRIES)
 		return NULL;
 
 	tlb_index = 0;
@@ -291,7 +288,7 @@ static void *tlb_next(struct seq_file *tlb, void *v, loff_t *pos)
 {
 	unsigned long *index = v;
 
-	if (*index >= 31)
+	if (*index >= NR_TLB_ENTRIES - 1)
 		return NULL;
 
 	++*pos;
@@ -313,16 +310,16 @@ static int tlb_show(struct seq_file *tlb, void *v)
 	if (*index == 0)
 		seq_puts(tlb, "ID  V G ASID VPN   PFN   AP SZ C B W D\n");
 
-	BUG_ON(*index >= 32);
+	BUG_ON(*index >= NR_TLB_ENTRIES);
 
 	local_irq_save(flags);
 	mmucr_save = sysreg_read(MMUCR);
 	tlbehi_save = sysreg_read(TLBEHI);
-	mmucr = mmucr_save & 0x13;
-	mmucr |= *index << 14;
+	mmucr = SYSREG_BFINS(DRP, *index, mmucr_save);
 	sysreg_write(MMUCR, mmucr);
 
-	asm volatile("tlbr" : : : "memory");
+	/* TLBR might change the ASID */
+	__builtin_tlbr();
 	cpu_sync_pipeline();
 
 	tlbehi = sysreg_read(TLBEHI);
@@ -334,16 +331,18 @@ static int tlb_show(struct seq_file *tlb, void *v)
 	local_irq_restore(flags);
 
 	seq_printf(tlb, "%2lu: %c %c %02x   %05x %05x %o  %o  %c %c %c %c\n",
-	       *index,
-	       (tlbehi & 0x200)?'1':'0',
-	       (tlbelo & 0x100)?'1':'0',
-	       (tlbehi & 0xff),
-	       (tlbehi >> 12), (tlbelo >> 12),
-	       (tlbelo >> 4) & 7, (tlbelo >> 2) & 3,
-	       (tlbelo & 0x200)?'1':'0',
-	       (tlbelo & 0x080)?'1':'0',
-	       (tlbelo & 0x001)?'1':'0',
-	       (tlbelo & 0x002)?'1':'0');
+		   *index,
+		   SYSREG_BFEXT(TLBEHI_V, tlbehi) ? '1' : '0',
+		   SYSREG_BFEXT(G, tlbelo) ? '1' : '0',
+		   SYSREG_BFEXT(ASID, tlbehi),
+		   SYSREG_BFEXT(VPN, tlbehi) >> 2,
+		   SYSREG_BFEXT(PFN, tlbelo) >> 2,
+		   SYSREG_BFEXT(AP, tlbelo),
+		   SYSREG_BFEXT(SZ, tlbelo),
+		   SYSREG_BFEXT(TLBELO_C, tlbelo) ? '1' : '0',
+		   SYSREG_BFEXT(B, tlbelo) ? '1' : '0',
+		   SYSREG_BFEXT(W, tlbelo) ? '1' : '0',
+		   SYSREG_BFEXT(TLBELO_D, tlbelo) ? '1' : '0');
 
 	return 0;
 }
-- 
cgit v1.1


From ebe74597a55fef00edc80a414ef5c6477d035e0a Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Mon, 14 Jan 2008 22:16:50 +0100
Subject: avr32: Remove useless zeroing of swapper_pg_dir at startup

swapper_pg_dir is stored in .bss, so it must already be zeroed out
when we get there.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/mm/init.c | 16 +++-------------
 1 file changed, 3 insertions(+), 13 deletions(-)

(limited to 'arch/avr32')

diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c
index 5ee1e40..0e77578 100644
--- a/arch/avr32/mm/init.c
+++ b/arch/avr32/mm/init.c
@@ -108,19 +108,9 @@ void __init paging_init(void)
 	zero_page = alloc_bootmem_low_pages_node(NODE_DATA(0),
 						 PAGE_SIZE);
 
-	{
-		pgd_t *pg_dir;
-		int i;
-
-		pg_dir = swapper_pg_dir;
-		sysreg_write(PTBR, (unsigned long)pg_dir);
-
-		for (i = 0; i < PTRS_PER_PGD; i++)
-			pgd_val(pg_dir[i]) = 0;
-
-		enable_mmu();
-		printk ("CPU: Paging enabled\n");
-	}
+	sysreg_write(PTBR, (unsigned long)swapper_pg_dir);
+	enable_mmu();
+	printk ("CPU: Paging enabled\n");
 
 	for_each_online_node(nid) {
 		pg_data_t *pgdat = NODE_DATA(nid);
-- 
cgit v1.1


From cfd23e93a0289cf6711fd3877c5226658d87240a Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Mon, 14 Jan 2008 22:15:05 +0100
Subject: avr32: Store virtual addresses in the PGD

Instead of storing physical addresses along with page flags in the
PGD, store virtual addresses and use NULL to indicate a not present
second-level page table. A non-page-aligned page table indicates a bad
PMD.

This simplifies the TLB miss handler since it no longer has to check
the Present bit and no longer has to convert the PGD entry from
physical to virtual address. Instead, it has to check for a NULL
entry, which is slightly cheaper than either.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/kernel/entry-avr32b.S | 45 ++++++++++++++++++----------------------
 arch/avr32/kernel/vmlinux.lds.S  |  4 ++++
 arch/avr32/mm/init.c             |  4 +++-
 3 files changed, 27 insertions(+), 26 deletions(-)

(limited to 'arch/avr32')

diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S
index 050c006..3cdd707 100644
--- a/arch/avr32/kernel/entry-avr32b.S
+++ b/arch/avr32/kernel/entry-avr32b.S
@@ -74,12 +74,6 @@ exception_vectors:
 	.align	2
 	bral	do_dtlb_modified
 
-	/*
-	 * r0 :	PGD/PT/PTE
-	 * r1 : Offending address
-	 * r2 : Scratch register
-	 * r3 : Cause (5, 12 or 13)
-	 */
 #define	tlbmiss_save	pushm	r0-r3
 #define tlbmiss_restore	popm	r0-r3
 
@@ -108,17 +102,17 @@ tlb_miss_common:
 	bld	r0, 31
 	brcs	handle_vmalloc_miss
 
-	/* First level lookup */
+	/*
+	 * First level lookup: The PGD contains virtual pointers to
+	 * the second-level page tables, but they may be NULL if not
+	 * present.
+	 */
 pgtbl_lookup:
 	lsr	r2, r0, PGDIR_SHIFT
 	ld.w	r3, r1[r2 << 2]
 	bfextu	r1, r0, PAGE_SHIFT, PGDIR_SHIFT - PAGE_SHIFT
-	bld	r3, _PAGE_BIT_PRESENT
-	brcc	page_table_not_present
-
-	/* Translate to virtual address in P1. */
-	andl	r3, 0xf000
-	sbr	r3, 31
+	cp.w	r3, 0
+	breq	page_table_not_present
 
 	/* Second level lookup */
 	ld.w	r2, r3[r1 << 2]
@@ -155,6 +149,19 @@ handle_vmalloc_miss:
 	orh	r1, hi(swapper_pg_dir)
 	rjmp	pgtbl_lookup
 
+	/* The slow path of the TLB miss handler */
+	.align	2
+page_table_not_present:
+page_not_present:
+	tlbmiss_restore
+	sub	sp, 4
+	stmts	--sp, r0-lr
+	rcall	save_full_context_ex
+	mfsr	r12, SYSREG_ECR
+	mov	r11, sp
+	rcall	do_page_fault
+	rjmp	ret_from_exception
+
 
 	/* ---                    System Call                    --- */
 
@@ -267,18 +274,6 @@ syscall_exit_work:
 	brcc	syscall_exit_cont
 	rjmp	enter_monitor_mode
 
-	/* The slow path of the TLB miss handler */
-page_table_not_present:
-page_not_present:
-	tlbmiss_restore
-	sub	sp, 4
-	stmts	--sp, r0-lr
-	rcall	save_full_context_ex
-	mfsr	r12, SYSREG_ECR
-	mov	r11, sp
-	rcall	do_page_fault
-	rjmp	ret_from_exception
-
 	/* This function expects to find offending PC in SYSREG_RAR_EX */
 	.type	save_full_context_ex, @function
 	.align	2
diff --git a/arch/avr32/kernel/vmlinux.lds.S b/arch/avr32/kernel/vmlinux.lds.S
index 033dd46..5d25d8e 100644
--- a/arch/avr32/kernel/vmlinux.lds.S
+++ b/arch/avr32/kernel/vmlinux.lds.S
@@ -99,6 +99,10 @@ SECTIONS
 		 */
 		*(.data.init_task)
 
+		/* Then, the page-aligned data */
+		. = ALIGN(PAGE_SIZE);
+		*(.data.page_aligned)
+
 		/* Then, the cacheline aligned data */
 		. = ALIGN(L1_CACHE_BYTES);
 		*(.data.cacheline_aligned)
diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c
index 0e77578..3f90a87 100644
--- a/arch/avr32/mm/init.c
+++ b/arch/avr32/mm/init.c
@@ -24,9 +24,11 @@
 #include <asm/setup.h>
 #include <asm/sections.h>
 
+#define __page_aligned	__attribute__((section(".data.page_aligned")))
+
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-pgd_t swapper_pg_dir[PTRS_PER_PGD];
+pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned;
 
 struct page *empty_zero_page;
 EXPORT_SYMBOL(empty_zero_page);
-- 
cgit v1.1


From a9a934f278613885816aa9f177968c1dac557240 Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Mon, 14 Jan 2008 23:11:26 +0100
Subject: avr32: Cover the kernel page tables in the user PGDs

Expand the per-process PGDs so that they cover the kernel virtual
memory area as well. This simplifies the TLB miss handler fastpath
since it doesn't have to check for kernel addresses anymore.

If a TLB miss happens on a kernel address and a second-level page
table can't be found, we check swapper_pg_dir and copy the PGD entry
into the user PGD if it can be found there.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/kernel/entry-avr32b.S | 42 ++++++++++++++++++++++++++++++----------
 1 file changed, 32 insertions(+), 10 deletions(-)

(limited to 'arch/avr32')

diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S
index 3cdd707..2b398ca 100644
--- a/arch/avr32/kernel/entry-avr32b.S
+++ b/arch/avr32/kernel/entry-avr32b.S
@@ -98,10 +98,6 @@ tlb_miss_common:
 	mfsr	r0, SYSREG_TLBEAR
 	mfsr	r1, SYSREG_PTBR
 
-	/* Is it the vmalloc space? */
-	bld	r0, 31
-	brcs	handle_vmalloc_miss
-
 	/*
 	 * First level lookup: The PGD contains virtual pointers to
 	 * the second-level page tables, but they may be NULL if not
@@ -143,15 +139,13 @@ pgtbl_lookup:
 	tlbmiss_restore
 	rete
 
-handle_vmalloc_miss:
-	/* Simply do the lookup in init's page table */
-	mov	r1, lo(swapper_pg_dir)
-	orh	r1, hi(swapper_pg_dir)
-	rjmp	pgtbl_lookup
-
 	/* The slow path of the TLB miss handler */
 	.align	2
 page_table_not_present:
+	/* Do we need to synchronize with swapper_pg_dir? */
+	bld	r0, 31
+	brcs	sync_with_swapper_pg_dir
+
 page_not_present:
 	tlbmiss_restore
 	sub	sp, 4
@@ -162,6 +156,34 @@ page_not_present:
 	rcall	do_page_fault
 	rjmp	ret_from_exception
 
+	.align	2
+sync_with_swapper_pg_dir:
+	/*
+	 * If swapper_pg_dir contains a non-NULL second-level page
+	 * table pointer, copy it into the current PGD. If not, we
+	 * must handle it as a full-blown page fault.
+	 *
+	 * Jumping back to pgtbl_lookup causes an unnecessary lookup,
+	 * but it is guaranteed to be a cache hit, it won't happen
+	 * very often, and we absolutely do not want to sacrifice any
+	 * performance in the fast path in order to improve this.
+	 */
+	mov	r1, lo(swapper_pg_dir)
+	orh	r1, hi(swapper_pg_dir)
+	ld.w	r3, r1[r2 << 2]
+	cp.w	r3, 0
+	breq	page_not_present
+	mfsr	r1, SYSREG_PTBR
+	st.w	r1[r2 << 2], r3
+	rjmp	pgtbl_lookup
+
+	/*
+	 * We currently have two bytes left at this point until we
+	 * crash into the system call handler...
+	 *
+	 * Don't worry, the assembler will let us know.
+	 */
+
 
 	/* ---                    System Call                    --- */
 
-- 
cgit v1.1


From 5a4d5292779b6163aa41e594a56307e442fbe73c Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Mon, 14 Jan 2008 23:33:44 +0100
Subject: avr32: Use a quicklist for PGD allocation

Use a quicklist to allocate process PGDs. This is expected to be
slightly faster since we need to copy entries from swapper_pg_dir,
which can stay around for pages on the PGD quick list.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/Kconfig | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch/avr32')

diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 09ad799..a5793c1 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -147,6 +147,9 @@ config PHYS_OFFSET
 
 source "kernel/Kconfig.preempt"
 
+config QUICKLIST
+	def_bool y
+
 config HAVE_ARCH_BOOTMEM_NODE
 	def_bool n
 
-- 
cgit v1.1


From 7951f188a0b7f9b2f181c692efb0d31082bec346 Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date: Wed, 5 Mar 2008 15:08:27 +0100
Subject: avr32: Enable SDRAMC clock at startup

The SDRAM controller needs a clock in order to respond to our
commands, and suspend doesn't work very well without the SDRAM in
self-refresh mode.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
---
 arch/avr32/mach-at32ap/at32ap700x.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'arch/avr32')

diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index baf4680..3ee5e72 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -675,6 +675,14 @@ static struct clk hramc_clk = {
 	.users		= 1,
 	.index		= 3,
 };
+static struct clk sdramc_clk = {
+	.name		= "sdramc_clk",
+	.parent		= &pbb_clk,
+	.mode		= pbb_clk_mode,
+	.get_rate	= pbb_clk_get_rate,
+	.users		= 1,
+	.index		= 14,
+};
 
 static struct resource smc0_resource[] = {
 	PBMEM(0xfff03400),
@@ -1998,6 +2006,7 @@ struct clk *at32_clock_list[] = {
 	&hmatrix_clk,
 	&ebi_clk,
 	&hramc_clk,
+	&sdramc_clk,
 	&smc0_pclk,
 	&smc0_mck,
 	&pdc_hclk,
-- 
cgit v1.1


From b83d6ee17588f1a4fbfc8ef0451b0900a5ef5950 Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date: Wed, 5 Mar 2008 10:00:28 +0100
Subject: avr32: Add simple SRAM allocator

Add SRAM allocator for avr32, which is just a thin wrapper around
genalloc.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
---
 arch/avr32/Kconfig                  |  1 +
 arch/avr32/mach-at32ap/at32ap700x.c | 26 ++++++++++++++++++++++++++
 2 files changed, 27 insertions(+)

(limited to 'arch/avr32')

diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index a5793c1..e8ee5fa 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -88,6 +88,7 @@ config PLATFORM_AT32AP
 	select MMU
 	select PERFORMANCE_COUNTERS
 	select HAVE_GPIO_LIB
+	select GENERIC_ALLOCATOR
 
 #
 # CPU types
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 3ee5e72..07b21b1 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -20,6 +20,7 @@
 #include <asm/arch/at32ap700x.h>
 #include <asm/arch/board.h>
 #include <asm/arch/portmux.h>
+#include <asm/arch/sram.h>
 
 #include <video/atmel_lcdc.h>
 
@@ -2120,3 +2121,28 @@ void __init setup_platform(void)
 	at32_init_pio(&pio3_device);
 	at32_init_pio(&pio4_device);
 }
+
+struct gen_pool *sram_pool;
+
+static int __init sram_init(void)
+{
+	struct gen_pool *pool;
+
+	/* 1KiB granularity */
+	pool = gen_pool_create(10, -1);
+	if (!pool)
+		goto fail;
+
+	if (gen_pool_add(pool, 0x24000000, 0x8000, -1))
+		goto err_pool_add;
+
+	sram_pool = pool;
+	return 0;
+
+err_pool_add:
+	gen_pool_destroy(pool);
+fail:
+	pr_err("Failed to create SRAM pool\n");
+	return -ENOMEM;
+}
+core_initcall(sram_init);
-- 
cgit v1.1


From aa8e87ca619a3d1944874e85d74fda90607c73b9 Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date: Sun, 24 Feb 2008 14:26:03 +0100
Subject: avr32: Add system device for the internal interrupt controller (intc)

This makes the intc show up in sysfs (probably not very useful), and
allows us to easily add suspend/resume support later.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
---
 arch/avr32/mach-at32ap/intc.c | 28 +++++++++++++++++++++++++---
 1 file changed, 25 insertions(+), 3 deletions(-)

(limited to 'arch/avr32')

diff --git a/arch/avr32/mach-at32ap/intc.c b/arch/avr32/mach-at32ap/intc.c
index 097cf4e..644a3fb 100644
--- a/arch/avr32/mach-at32ap/intc.c
+++ b/arch/avr32/mach-at32ap/intc.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2006 Atmel Corporation
+ * Copyright (C) 2006, 2008 Atmel Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -12,14 +12,16 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/platform_device.h>
+#include <linux/sysdev.h>
 
 #include <asm/io.h>
 
 #include "intc.h"
 
 struct intc {
-	void __iomem	*regs;
-	struct irq_chip	chip;
+	void __iomem		*regs;
+	struct irq_chip		chip;
+	struct sys_device	sysdev;
 };
 
 extern struct platform_device at32_intc0_device;
@@ -136,6 +138,26 @@ fail:
 	panic("Interrupt controller initialization failed!\n");
 }
 
+static struct sysdev_class intc_class = {
+	.name	= "intc",
+};
+
+static int __init intc_init_sysdev(void)
+{
+	int ret;
+
+	ret = sysdev_class_register(&intc_class);
+	if (ret)
+		return ret;
+
+	intc0.sysdev.id = 0;
+	intc0.sysdev.cls = &intc_class;
+	ret = sysdev_register(&intc0.sysdev);
+
+	return ret;
+}
+device_initcall(intc_init_sysdev);
+
 unsigned long intc_get_pending(unsigned int group)
 {
 	return intc_readl(&intc0, INTREQ0 + 4 * group);
-- 
cgit v1.1


From 02a00cf672a37292c31bbdde191712bfa40a4f1d Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date: Sun, 24 Feb 2008 13:51:38 +0100
Subject: avr32: Power Management support ("standby" and "mem" modes)

Implement Standby support. In this mode, we'll suspend all drivers,
put the SDRAM in self-refresh mode and switch off the HSB bus
("frozen" mode.)

Implement Suspend-to-mem support. In this mode, we suspend all
drivers, put the SDRAM into self-refresh mode and switch off all
internal clocks except the 32 kHz oscillator ("stop" mode.)

The lowest-level suspend code runs from a small portion of SRAM
allocated at startup time. This gets rid of a small potential race
with the SDRAM where we might try to enter self-refresh mode in the
middle of an icache burst. We also relocate all interrupt and
exception handlers to SRAM during the small window when we enter and
exit the low-power modes.

We don't need to do any special tricks to start and stop the PLL. The
main clock is automatically gated by hardware until the PLL is stable.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
---
 arch/avr32/Kconfig                     |   5 +
 arch/avr32/mach-at32ap/Makefile        |   5 +
 arch/avr32/mach-at32ap/intc.c          |  54 +++++++-
 arch/avr32/mach-at32ap/pm-at32ap700x.S | 108 +++++++++++++++
 arch/avr32/mach-at32ap/pm.c            | 245 +++++++++++++++++++++++++++++++++
 arch/avr32/mach-at32ap/sdramc.h        |  76 ++++++++++
 6 files changed, 492 insertions(+), 1 deletion(-)
 create mode 100644 arch/avr32/mach-at32ap/pm.c
 create mode 100644 arch/avr32/mach-at32ap/sdramc.h

(limited to 'arch/avr32')

diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index e8ee5fa..45d63c9 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -205,6 +205,11 @@ endmenu
 
 menu "Power management options"
 
+source "kernel/power/Kconfig"
+
+config ARCH_SUSPEND_POSSIBLE
+	def_bool y
+
 menu "CPU Frequency scaling"
 
 source "drivers/cpufreq/Kconfig"
diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile
index cb44182..d5018e2 100644
--- a/arch/avr32/mach-at32ap/Makefile
+++ b/arch/avr32/mach-at32ap/Makefile
@@ -1,3 +1,8 @@
 obj-y				+= pdc.o clock.o intc.o extint.o pio.o hsmc.o
 obj-$(CONFIG_CPU_AT32AP700X)	+= at32ap700x.o pm-at32ap700x.o
 obj-$(CONFIG_CPU_FREQ_AT32AP)	+= cpufreq.o
+obj-$(CONFIG_PM)		+= pm.o
+
+ifeq ($(CONFIG_PM_DEBUG),y)
+CFLAGS_pm.o	+= -DDEBUG
+endif
diff --git a/arch/avr32/mach-at32ap/intc.c b/arch/avr32/mach-at32ap/intc.c
index 644a3fb..994c4545 100644
--- a/arch/avr32/mach-at32ap/intc.c
+++ b/arch/avr32/mach-at32ap/intc.c
@@ -22,6 +22,10 @@ struct intc {
 	void __iomem		*regs;
 	struct irq_chip		chip;
 	struct sys_device	sysdev;
+#ifdef CONFIG_PM
+	unsigned long		suspend_ipr;
+	unsigned long		saved_ipr[64];
+#endif
 };
 
 extern struct platform_device at32_intc0_device;
@@ -138,8 +142,56 @@ fail:
 	panic("Interrupt controller initialization failed!\n");
 }
 
+#ifdef CONFIG_PM
+void intc_set_suspend_handler(unsigned long offset)
+{
+	intc0.suspend_ipr = offset;
+}
+
+static int intc_suspend(struct sys_device *sdev, pm_message_t state)
+{
+	struct intc *intc = container_of(sdev, struct intc, sysdev);
+	int i;
+
+	if (unlikely(!irqs_disabled())) {
+		pr_err("intc_suspend: called with interrupts enabled\n");
+		return -EINVAL;
+	}
+
+	if (unlikely(!intc->suspend_ipr)) {
+		pr_err("intc_suspend: suspend_ipr not initialized\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < 64; i++) {
+		intc->saved_ipr[i] = intc_readl(intc, INTPR0 + 4 * i);
+		intc_writel(intc, INTPR0 + 4 * i, intc->suspend_ipr);
+	}
+
+	return 0;
+}
+
+static int intc_resume(struct sys_device *sdev)
+{
+	struct intc *intc = container_of(sdev, struct intc, sysdev);
+	int i;
+
+	WARN_ON(!irqs_disabled());
+
+	for (i = 0; i < 64; i++)
+		intc_writel(intc, INTPR0 + 4 * i, intc->saved_ipr[i]);
+
+	return 0;
+}
+#else
+#define intc_suspend	NULL
+#define intc_resume	NULL
+#endif
+
 static struct sysdev_class intc_class = {
-	.name	= "intc",
+	.name		= "intc",
+	.suspend	= intc_suspend,
+	.resume		= intc_resume,
 };
 
 static int __init intc_init_sysdev(void)
diff --git a/arch/avr32/mach-at32ap/pm-at32ap700x.S b/arch/avr32/mach-at32ap/pm-at32ap700x.S
index 949e248..0a53ad3 100644
--- a/arch/avr32/mach-at32ap/pm-at32ap700x.S
+++ b/arch/avr32/mach-at32ap/pm-at32ap700x.S
@@ -12,6 +12,12 @@
 #include <asm/thread_info.h>
 #include <asm/arch/pm.h>
 
+#include "pm.h"
+#include "sdramc.h"
+
+/* Same as 0xfff00000 but fits in a 21 bit signed immediate */
+#define PM_BASE	-0x100000
+
 	.section .bss, "wa", @nobits
 	.global	disable_idle_sleep
 	.type	disable_idle_sleep, @object
@@ -64,3 +70,105 @@ cpu_idle_skip_sleep:
 	unmask_interrupts
 	retal	r12
 	.size	cpu_idle_skip_sleep, . - cpu_idle_skip_sleep
+
+#ifdef CONFIG_PM
+	.section .init.text, "ax", @progbits
+
+	.global	pm_exception
+	.type	pm_exception, @function
+pm_exception:
+	/*
+	 * Exceptions are masked when we switch to this handler, so
+	 * we'll only get "unrecoverable" exceptions (offset 0.)
+	 */
+	sub	r12, pc, . - .Lpanic_msg
+	lddpc	pc, .Lpanic_addr
+
+	.align	2
+.Lpanic_addr:
+	.long	panic
+.Lpanic_msg:
+	.asciz	"Unrecoverable exception during suspend\n"
+	.size	pm_exception, . - pm_exception
+
+	.global	pm_irq0
+	.type	pm_irq0, @function
+pm_irq0:
+	/* Disable interrupts and return after the sleep instruction */
+	mfsr	r9, SYSREG_RSR_INT0
+	mtsr	SYSREG_RAR_INT0, r8
+	sbr	r9, SYSREG_GM_OFFSET
+	mtsr	SYSREG_RSR_INT0, r9
+	rete
+
+	/*
+	 * void cpu_enter_standby(unsigned long sdramc_base)
+	 *
+	 * Enter PM_SUSPEND_STANDBY mode. At this point, all drivers
+	 * are suspended and interrupts are disabled. Interrupts
+	 * marked as 'wakeup' event sources may still come along and
+	 * get us out of here.
+	 *
+	 * The SDRAM will be put into self-refresh mode (which does
+	 * not require a clock from the CPU), and the CPU will be put
+	 * into "frozen" mode (HSB bus stopped). The SDRAM controller
+	 * will automatically bring the SDRAM into normal mode on the
+	 * first access, and the power manager will automatically
+	 * start the HSB and CPU clocks upon a wakeup event.
+	 *
+	 * This code uses the same "skip sleep" technique as above.
+	 * It is very important that we jump directly to
+	 * cpu_after_sleep after the sleep instruction since that's
+	 * where we'll end up if the interrupt handler decides that we
+	 * need to skip the sleep instruction.
+	 */
+	.global	pm_standby
+	.type	pm_standby, @function
+pm_standby:
+	/*
+	 * interrupts are already masked at this point, and EVBA
+	 * points to pm_exception above.
+	 */
+	ld.w	r10, r12[SDRAMC_LPR]
+	sub	r8, pc, . - 1f		/* return address for irq handler */
+	mov	r11, SDRAMC_LPR_LPCB_SELF_RFR
+	bfins	r10, r11, 0, 2		/* LPCB <- self Refresh */
+	sync	0			/* flush write buffer */
+	st.w	r12[SDRAMC_LPR], r11	/* put SDRAM in self-refresh mode */
+	ld.w	r11, r12[SDRAMC_LPR]
+	unmask_interrupts
+	sleep	CPU_SLEEP_FROZEN
+1:	mask_interrupts
+	retal	r12
+	.size	pm_standby, . - pm_standby
+
+	.global	pm_suspend_to_ram
+	.type	pm_suspend_to_ram, @function
+pm_suspend_to_ram:
+	/*
+	 * interrupts are already masked at this point, and EVBA
+	 * points to pm_exception above.
+	 */
+	mov	r11, 0
+	cache	r11[2], 8		/* clean all dcache lines */
+	sync	0			/* flush write buffer */
+	ld.w	r10, r12[SDRAMC_LPR]
+	sub	r8, pc, . - 1f		/* return address for irq handler */
+	mov	r11, SDRAMC_LPR_LPCB_SELF_RFR
+	bfins	r10, r11, 0, 2		/* LPCB <- self refresh */
+	st.w	r12[SDRAMC_LPR], r10	/* put SDRAM in self-refresh mode */
+	ld.w	r11, r12[SDRAMC_LPR]
+
+	unmask_interrupts
+	sleep	CPU_SLEEP_STOP
+1:	mask_interrupts
+
+	retal	r12
+	.size	pm_suspend_to_ram, . - pm_suspend_to_ram
+
+	.global	pm_sram_end
+	.type	pm_sram_end, @function
+pm_sram_end:
+	.size	pm_sram_end, 0
+
+#endif /* CONFIG_PM */
diff --git a/arch/avr32/mach-at32ap/pm.c b/arch/avr32/mach-at32ap/pm.c
new file mode 100644
index 0000000..0b76432
--- /dev/null
+++ b/arch/avr32/mach-at32ap/pm.c
@@ -0,0 +1,245 @@
+/*
+ * AVR32 AP Power Management
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+#include <linux/io.h>
+#include <linux/suspend.h>
+#include <linux/vmalloc.h>
+
+#include <asm/cacheflush.h>
+#include <asm/sysreg.h>
+
+#include <asm/arch/pm.h>
+#include <asm/arch/sram.h>
+
+/* FIXME: This is only valid for AP7000 */
+#define SDRAMC_BASE	0xfff03800
+
+#include "sdramc.h"
+
+#define SRAM_PAGE_FLAGS	(SYSREG_BIT(TLBELO_D) | SYSREG_BF(SZ, 1)	\
+				| SYSREG_BF(AP, 3) | SYSREG_BIT(G))
+
+
+static unsigned long	pm_sram_start;
+static size_t		pm_sram_size;
+static struct vm_struct	*pm_sram_area;
+
+static void (*avr32_pm_enter_standby)(unsigned long sdramc_base);
+static void (*avr32_pm_enter_str)(unsigned long sdramc_base);
+
+/*
+ * Must be called with interrupts disabled. Exceptions will be masked
+ * on return (i.e. all exceptions will be "unrecoverable".)
+ */
+static void *avr32_pm_map_sram(void)
+{
+	unsigned long	vaddr;
+	unsigned long	page_addr;
+	u32		tlbehi;
+	u32		mmucr;
+
+	vaddr = (unsigned long)pm_sram_area->addr;
+	page_addr = pm_sram_start & PAGE_MASK;
+
+	/*
+	 * Mask exceptions and grab the first TLB entry. We won't be
+	 * needing it while sleeping.
+	 */
+	asm volatile("ssrf	%0" : : "i"(SYSREG_EM_OFFSET) : "memory");
+
+	mmucr = sysreg_read(MMUCR);
+	tlbehi = sysreg_read(TLBEHI);
+	sysreg_write(MMUCR, SYSREG_BFINS(DRP, 0, mmucr));
+
+	tlbehi = SYSREG_BF(ASID, SYSREG_BFEXT(ASID, tlbehi));
+	tlbehi |= vaddr & PAGE_MASK;
+	tlbehi |= SYSREG_BIT(TLBEHI_V);
+
+	sysreg_write(TLBELO, page_addr | SRAM_PAGE_FLAGS);
+	sysreg_write(TLBEHI, tlbehi);
+	__builtin_tlbw();
+
+	return (void *)(vaddr + pm_sram_start - page_addr);
+}
+
+/*
+ * Must be called with interrupts disabled. Exceptions will be
+ * unmasked on return.
+ */
+static void avr32_pm_unmap_sram(void)
+{
+	u32	mmucr;
+	u32	tlbehi;
+	u32	tlbarlo;
+
+	/* Going to update TLB entry at index 0 */
+	mmucr = sysreg_read(MMUCR);
+	tlbehi = sysreg_read(TLBEHI);
+	sysreg_write(MMUCR, SYSREG_BFINS(DRP, 0, mmucr));
+
+	/* Clear the "valid" bit */
+	tlbehi = SYSREG_BF(ASID, SYSREG_BFEXT(ASID, tlbehi));
+	sysreg_write(TLBEHI, tlbehi);
+
+	/* Mark it as "not accessed" */
+	tlbarlo = sysreg_read(TLBARLO);
+	sysreg_write(TLBARLO, tlbarlo | 0x80000000U);
+
+	/* Update the TLB */
+	__builtin_tlbw();
+
+	/* Unmask exceptions */
+	asm volatile("csrf	%0" : : "i"(SYSREG_EM_OFFSET) : "memory");
+}
+
+static int avr32_pm_valid_state(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_ON:
+	case PM_SUSPEND_STANDBY:
+	case PM_SUSPEND_MEM:
+		return 1;
+
+	default:
+		return 0;
+	}
+}
+
+static int avr32_pm_enter(suspend_state_t state)
+{
+	u32		lpr_saved;
+	u32		evba_saved;
+	void		*sram;
+
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		sram = avr32_pm_map_sram();
+
+		/* Switch to in-sram exception handlers */
+		evba_saved = sysreg_read(EVBA);
+		sysreg_write(EVBA, (unsigned long)sram);
+
+		/*
+		 * Save the LPR register so that we can re-enable
+		 * SDRAM Low Power mode on resume.
+		 */
+		lpr_saved = sdramc_readl(LPR);
+		pr_debug("%s: Entering standby...\n", __func__);
+		avr32_pm_enter_standby(SDRAMC_BASE);
+		sdramc_writel(LPR, lpr_saved);
+
+		/* Switch back to regular exception handlers */
+		sysreg_write(EVBA, evba_saved);
+
+		avr32_pm_unmap_sram();
+		break;
+
+	case PM_SUSPEND_MEM:
+		sram = avr32_pm_map_sram();
+
+		/* Switch to in-sram exception handlers */
+		evba_saved = sysreg_read(EVBA);
+		sysreg_write(EVBA, (unsigned long)sram);
+
+		/*
+		 * Save the LPR register so that we can re-enable
+		 * SDRAM Low Power mode on resume.
+		 */
+		lpr_saved = sdramc_readl(LPR);
+		pr_debug("%s: Entering suspend-to-ram...\n", __func__);
+		avr32_pm_enter_str(SDRAMC_BASE);
+		sdramc_writel(LPR, lpr_saved);
+
+		/* Switch back to regular exception handlers */
+		sysreg_write(EVBA, evba_saved);
+
+		avr32_pm_unmap_sram();
+		break;
+
+	case PM_SUSPEND_ON:
+		pr_debug("%s: Entering idle...\n", __func__);
+		cpu_enter_idle();
+		break;
+
+	default:
+		pr_debug("%s: Invalid suspend state %d\n", __func__, state);
+		goto out;
+	}
+
+	pr_debug("%s: wakeup\n", __func__);
+
+out:
+	return 0;
+}
+
+static struct platform_suspend_ops avr32_pm_ops = {
+	.valid	= avr32_pm_valid_state,
+	.enter	= avr32_pm_enter,
+};
+
+static unsigned long avr32_pm_offset(void *symbol)
+{
+	extern u8 pm_exception[];
+
+	return (unsigned long)symbol - (unsigned long)pm_exception;
+}
+
+static int __init avr32_pm_init(void)
+{
+	extern u8 pm_exception[];
+	extern u8 pm_irq0[];
+	extern u8 pm_standby[];
+	extern u8 pm_suspend_to_ram[];
+	extern u8 pm_sram_end[];
+	void *dst;
+
+	/*
+	 * To keep things simple, we depend on not needing more than a
+	 * single page.
+	 */
+	pm_sram_size = avr32_pm_offset(pm_sram_end);
+	if (pm_sram_size > PAGE_SIZE)
+		goto err;
+
+	pm_sram_start = sram_alloc(pm_sram_size);
+	if (!pm_sram_start)
+		goto err_alloc_sram;
+
+	/* Grab a virtual area we can use later on. */
+	pm_sram_area = get_vm_area(pm_sram_size, VM_IOREMAP);
+	if (!pm_sram_area)
+		goto err_vm_area;
+	pm_sram_area->phys_addr = pm_sram_start;
+
+	local_irq_disable();
+	dst = avr32_pm_map_sram();
+	memcpy(dst, pm_exception, pm_sram_size);
+	flush_dcache_region(dst, pm_sram_size);
+	invalidate_icache_region(dst, pm_sram_size);
+	avr32_pm_unmap_sram();
+	local_irq_enable();
+
+	avr32_pm_enter_standby = dst + avr32_pm_offset(pm_standby);
+	avr32_pm_enter_str = dst + avr32_pm_offset(pm_suspend_to_ram);
+	intc_set_suspend_handler(avr32_pm_offset(pm_irq0));
+
+	suspend_set_ops(&avr32_pm_ops);
+
+	printk("AVR32 AP Power Management enabled\n");
+
+	return 0;
+
+err_vm_area:
+	sram_free(pm_sram_start, pm_sram_size);
+err_alloc_sram:
+err:
+	pr_err("AVR32 Power Management initialization failed\n");
+	return -ENOMEM;
+}
+arch_initcall(avr32_pm_init);
diff --git a/arch/avr32/mach-at32ap/sdramc.h b/arch/avr32/mach-at32ap/sdramc.h
new file mode 100644
index 0000000..66eeaed
--- /dev/null
+++ b/arch/avr32/mach-at32ap/sdramc.h
@@ -0,0 +1,76 @@
+/*
+ * Register definitions for the AT32AP SDRAM Controller
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+/* Register offsets */
+#define SDRAMC_MR			0x0000
+#define SDRAMC_TR			0x0004
+#define SDRAMC_CR			0x0008
+#define SDRAMC_HSR			0x000c
+#define SDRAMC_LPR			0x0010
+#define SDRAMC_IER			0x0014
+#define SDRAMC_IDR			0x0018
+#define SDRAMC_IMR			0x001c
+#define SDRAMC_ISR			0x0020
+#define SDRAMC_MDR			0x0024
+
+/* MR - Mode Register */
+#define SDRAMC_MR_MODE_NORMAL		(  0 <<  0)
+#define SDRAMC_MR_MODE_NOP		(  1 <<  0)
+#define SDRAMC_MR_MODE_BANKS_PRECHARGE	(  2 <<  0)
+#define SDRAMC_MR_MODE_LOAD_MODE	(  3 <<  0)
+#define SDRAMC_MR_MODE_AUTO_REFRESH	(  4 <<  0)
+#define SDRAMC_MR_MODE_EXT_LOAD_MODE	(  5 <<  0)
+#define SDRAMC_MR_MODE_POWER_DOWN	(  6 <<  0)
+
+/* CR - Configuration Register */
+#define SDRAMC_CR_NC_8_BITS		(  0 <<  0)
+#define SDRAMC_CR_NC_9_BITS		(  1 <<  0)
+#define SDRAMC_CR_NC_10_BITS		(  2 <<  0)
+#define SDRAMC_CR_NC_11_BITS		(  3 <<  0)
+#define SDRAMC_CR_NR_11_BITS		(  0 <<  2)
+#define SDRAMC_CR_NR_12_BITS		(  1 <<  2)
+#define SDRAMC_CR_NR_13_BITS		(  2 <<  2)
+#define SDRAMC_CR_NB_2_BANKS		(  0 <<  4)
+#define SDRAMC_CR_NB_4_BANKS		(  1 <<  4)
+#define SDRAMC_CR_CAS(x)		((x) <<  5)
+#define SDRAMC_CR_DBW_32_BITS		(  0 <<  7)
+#define SDRAMC_CR_DBW_16_BITS		(  1 <<  7)
+#define SDRAMC_CR_TWR(x)		((x) <<  8)
+#define SDRAMC_CR_TRC(x)		((x) << 12)
+#define SDRAMC_CR_TRP(x)		((x) << 16)
+#define SDRAMC_CR_TRCD(x)		((x) << 20)
+#define SDRAMC_CR_TRAS(x)		((x) << 24)
+#define SDRAMC_CR_TXSR(x)		((x) << 28)
+
+/* HSR - High Speed Register */
+#define SDRAMC_HSR_DA			(  1 <<  0)
+
+/* LPR - Low Power Register */
+#define SDRAMC_LPR_LPCB_INHIBIT		(  0 <<  0)
+#define SDRAMC_LPR_LPCB_SELF_RFR	(  1 <<  0)
+#define SDRAMC_LPR_LPCB_PDOWN		(  2 <<  0)
+#define SDRAMC_LPR_LPCB_DEEP_PDOWN	(  3 <<  0)
+#define SDRAMC_LPR_PASR(x)		((x) <<  4)
+#define SDRAMC_LPR_TCSR(x)		((x) <<  8)
+#define SDRAMC_LPR_DS(x)		((x) << 10)
+#define SDRAMC_LPR_TIMEOUT(x)		((x) << 12)
+
+/* IER/IDR/IMR/ISR - Interrupt Enable/Disable/Mask/Status Register */
+#define SDRAMC_ISR_RES			(  1 <<  0)
+
+/* MDR - Memory Device Register */
+#define SDRAMC_MDR_MD_SDRAM		(  0 <<  0)
+#define SDRAMC_MDR_MD_LOW_PWR_SDRAM	(  1 <<  0)
+
+/* Register access macros */
+#define sdramc_readl(reg) \
+	__raw_readl((void __iomem __force *)SDRAMC_BASE + SDRAMC_##reg)
+#define sdramc_writel(reg, value) \
+	__raw_writel(value, (void __iomem __force *)SDRAMC_BASE + SDRAMC_##reg)
-- 
cgit v1.1


From 7b4c9505f2fd82b117dd015b561f723b9a5dab79 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 3 Jul 2008 09:17:55 +0200
Subject: stacktrace: export save_stack_trace[_tsk]

Andrew Morton reported this against linux-next:

ERROR: ".save_stack_trace" [tests/backtracetest.ko] undefined!

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/avr32/kernel/stacktrace.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/avr32')

diff --git a/arch/avr32/kernel/stacktrace.c b/arch/avr32/kernel/stacktrace.c
index 9a68190..f4bdb44 100644
--- a/arch/avr32/kernel/stacktrace.c
+++ b/arch/avr32/kernel/stacktrace.c
@@ -51,3 +51,4 @@ void save_stack_trace(struct stack_trace *trace)
 		fp = frame->fp;
 	}
 }
+EXPORT_SYMBOL_GPL(save_stack_trace);
-- 
cgit v1.1


From 72f6befeea7dc634a83219287d5b874734b85637 Mon Sep 17 00:00:00 2001
From: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Date: Fri, 4 Jul 2008 09:33:03 +0200
Subject: avr32: Fix typo of IFSR in a comment in the PIO header file

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/mach-at32ap/pio.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/avr32')

diff --git a/arch/avr32/mach-at32ap/pio.h b/arch/avr32/mach-at32ap/pio.h
index 7795116..9484dfc 100644
--- a/arch/avr32/mach-at32ap/pio.h
+++ b/arch/avr32/mach-at32ap/pio.h
@@ -57,7 +57,7 @@
 
 /* Bitfields in IFDR */
 
-/* Bitfields in ISFR */
+/* Bitfields in IFSR */
 
 /* Bitfields in SODR */
 
-- 
cgit v1.1


From 7d2be0749a59096a334c94dc48f43294193cb8ed Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Mon, 30 Jun 2008 18:35:03 +0200
Subject: atmel-mci: Driver for Atmel on-chip MMC controllers

This is a driver for the MMC controller on the AP7000 chips from
Atmel. It should in theory work on AT91 systems too with some
tweaking, but since the DMA interface is quite different, it's not
entirely clear if it's worth merging this with the at91_mci driver.

This driver has been around for a while in BSPs and kernel sources
provided by Atmel, but this particular version uses the generic DMA
Engine framework (with the slave extensions) instead of an
avr32-only DMA controller framework.

This driver can also use PIO transfers when no DMA channels are
available, and for transfers where using DMA may be difficult or
impractical for some reason (e.g. the DMA setup overhead is usually
not worth it for very short transfers, and badly aligned buffers or
lengths are difficult to handle.)

Currently, the driver only support PIO transfers. DMA support has been
split out to a separate patch to hopefully make it easier to review.

The driver has been tested using mmc-block and ext3fs on several SD,
SDHC and MMC+ cards. Reads and writes work fine, with read transfer
rates up to 3.5 MiB/s on fast cards with debugging disabled.

The driver has also been tested using the mmc_test module on the same
cards. All tests except 7, 9, 15 and 17 succeed. The first two are
unsupported by all the cards I have, so I don't know if the driver
handles this correctly. The last two fail because the hardware flags a
Data CRC Error instead of a Data Timeout error. I'm not sure how to deal
with that.

Documentation for this controller can be found in many data sheets from
Atmel, including the AT32AP7000 data sheet which can be found here:

http://www.atmel.com/dyn/products/datasheets.asp?family_id=682

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---
 arch/avr32/boards/atngw100/setup.c      |  7 +++++++
 arch/avr32/boards/atstk1000/atstk1002.c |  3 +++
 arch/avr32/mach-at32ap/at32ap700x.c     | 30 +++++++++++++++++++++++++-----
 3 files changed, 35 insertions(+), 5 deletions(-)

(limited to 'arch/avr32')

diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index a51bb9f..c7fe94d 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -19,6 +19,7 @@
 #include <linux/leds.h>
 #include <linux/spi/spi.h>
 
+#include <asm/atmel-mci.h>
 #include <asm/io.h>
 #include <asm/setup.h>
 
@@ -51,6 +52,11 @@ static struct spi_board_info spi0_board_info[] __initdata = {
 	},
 };
 
+static struct mci_platform_data __initdata mci0_data = {
+	.detect_pin	= GPIO_PIN_PC(25),
+	.wp_pin		= GPIO_PIN_PE(0),
+};
+
 /*
  * The next two functions should go away as the boot loader is
  * supposed to initialize the macb address registers with a valid
@@ -170,6 +176,7 @@ static int __init atngw100_init(void)
 	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
 
 	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
+	at32_add_device_mci(0, &mci0_data);
 	at32_add_device_usba(0, NULL);
 
 	for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index 86b363c..e11659b 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -234,6 +234,9 @@ static int __init atstk1002_init(void)
 #ifdef CONFIG_BOARD_ATSTK100X_SPI1
 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
+#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
+	at32_add_device_mci(0, NULL);
+#endif
 #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
 	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
 #else
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 07b21b1..021d512 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -14,6 +14,7 @@
 #include <linux/spi/spi.h>
 #include <linux/usb/atmel_usba_udc.h>
 
+#include <asm/atmel-mci.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
@@ -1278,20 +1279,32 @@ static struct clk atmel_mci0_pclk = {
 	.index		= 9,
 };
 
-struct platform_device *__init at32_add_device_mci(unsigned int id)
+struct platform_device *__init
+at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 {
-	struct platform_device *pdev;
+	struct mci_platform_data	_data;
+	struct platform_device		*pdev;
+	struct dw_dma_slave		*dws;
 
 	if (id != 0)
 		return NULL;
 
 	pdev = platform_device_alloc("atmel_mci", id);
 	if (!pdev)
-		return NULL;
+		goto fail;
 
 	if (platform_device_add_resources(pdev, atmel_mci0_resource,
 				ARRAY_SIZE(atmel_mci0_resource)))
-		goto err_add_resources;
+		goto fail;
+
+	if (!data) {
+		data = &_data;
+		memset(data, 0, sizeof(struct mci_platform_data));
+	}
+
+	if (platform_device_add_data(pdev, data,
+				sizeof(struct mci_platform_data)))
+		goto fail;
 
 	select_peripheral(PA(10), PERIPH_A, 0);	/* CLK	 */
 	select_peripheral(PA(11), PERIPH_A, 0);	/* CMD	 */
@@ -1300,12 +1313,19 @@ struct platform_device *__init at32_add_device_mci(unsigned int id)
 	select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
 	select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
 
+	if (data) {
+		if (data->detect_pin != GPIO_PIN_NONE)
+			at32_select_gpio(data->detect_pin, 0);
+		if (data->wp_pin != GPIO_PIN_NONE)
+			at32_select_gpio(data->wp_pin, 0);
+	}
+
 	atmel_mci0_pclk.dev = &pdev->dev;
 
 	platform_device_add(pdev);
 	return pdev;
 
-err_add_resources:
+fail:
 	platform_device_put(pdev);
 	return NULL;
 }
-- 
cgit v1.1