From 142df13b7598d88de5b163464e74d2101912f479 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Sat, 3 May 2014 16:57:00 +0100 Subject: ARM: at91: at91sam9g45: change at91_adc name We can't use "at91_adc" to refer to the at91_adc driver anymore as the name is used to match an id_table. Signed-off-by: Alexandre Belloni Acked-by: Nicolas Ferre Signed-off-by: Jonathan Cameron --- arch/arm/mach-at91/at91sam9g45_devices.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index cb36fa8..8855402 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -1203,7 +1203,7 @@ static struct resource adc_resources[] = { }; static struct platform_device at91_adc_device = { - .name = "at91_adc", + .name = "at91sam9g45-adc", .id = -1, .dev = { .platform_data = &adc_data, -- cgit v1.1 From 301841a634976c1cef4490cae577ffd0f26d0149 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Sat, 3 May 2014 16:57:00 +0100 Subject: ARM: at91: at91sam9260: change at91_adc name We can't use "at91_adc" to refer to the at91_adc driver anymore as the name is used to match an id_table. Signed-off-by: Alexandre Belloni Acked-by: Nicolas Ferre Signed-off-by: Jonathan Cameron --- arch/arm/mach-at91/at91sam9260_devices.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index eda8d16..0a03159 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -1292,7 +1292,7 @@ static struct resource adc_resources[] = { }; static struct platform_device at91_adc_device = { - .name = "at91_adc", + .name = "at91sam9260-adc", .id = -1, .dev = { .platform_data = &adc_data, -- cgit v1.1 From 0d606c08f44a09e3ca86d4af1a40aec61a6e9dde Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sat, 22 Mar 2014 13:45:58 +0100 Subject: ARM: Kirkwood: Fix Atmel vendor prefix The documented vendor prefix for Atmel is 'atmel' not 'at' as used in these .dts[i] files. The i2c framework actually ignores the prefix, so making this change does not cause compatibility issues. Signed-off-by: Andrew Lunn Link: https://lkml.kernel.org/r/1395492360-1865-4-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood-laplug.dts | 2 +- arch/arm/boot/dts/kirkwood-ns2-common.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/kirkwood-laplug.dts b/arch/arm/boot/dts/kirkwood-laplug.dts index c9e82ef..6761ffa 100644 --- a/arch/arm/boot/dts/kirkwood-laplug.dts +++ b/arch/arm/boot/dts/kirkwood-laplug.dts @@ -48,7 +48,7 @@ status = "okay"; eeprom@50 { - compatible = "at,24c04"; + compatible = "atmel,24c04"; pagesize = <16>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index 743152f..843eb47 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -50,7 +50,7 @@ status = "okay"; eeprom@50 { - compatible = "at,24c04"; + compatible = "atmel,24c04"; pagesize = <16>; reg = <0x50>; }; -- cgit v1.1 From dcdf9cfc4868878957d5c372f82b233143ec4320 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sat, 22 Mar 2014 13:46:00 +0100 Subject: ARM: Kirkwood: DT: Add missing vendor prefix Add vendor prefixes to compatible strings where they are missing. Both the I2C and MTD framework ignore the prefix, so adding them has no effect on backwards compatibility. Signed-off-by: Andrew Lunn Link: https://lkml.kernel.org/r/1395492360-1865-6-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood-b3.dts | 2 +- arch/arm/boot/dts/kirkwood-cloudbox.dts | 2 +- arch/arm/boot/dts/kirkwood-dreamplug.dts | 2 +- arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts | 2 +- arch/arm/boot/dts/kirkwood-ns2-common.dtsi | 2 +- arch/arm/boot/dts/kirkwood-nsa310.dts | 2 +- arch/arm/boot/dts/kirkwood-nsa310a.dts | 2 +- arch/arm/boot/dts/kirkwood-openblocks_a6.dts | 2 +- arch/arm/boot/dts/kirkwood-openblocks_a7.dts | 2 +- 9 files changed, 9 insertions(+), 9 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/kirkwood-b3.dts b/arch/arm/boot/dts/kirkwood-b3.dts index 4079105..6becede 100644 --- a/arch/arm/boot/dts/kirkwood-b3.dts +++ b/arch/arm/boot/dts/kirkwood-b3.dts @@ -75,7 +75,7 @@ m25p16@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "m25p16"; + compatible = "st,m25p16"; reg = <0>; spi-max-frequency = <40000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts index 0e06fd3..3b62aee 100644 --- a/arch/arm/boot/dts/kirkwood-cloudbox.dts +++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts @@ -46,7 +46,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mx25l4005a"; + compatible = "mxicy,mx25l4005a"; reg = <0>; spi-max-frequency = <20000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index ef3463e..28b3ee36 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -43,7 +43,7 @@ m25p40@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mx25l1606e"; + compatible = "mxicy,mx25l1606e"; reg = <0>; spi-max-frequency = <50000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index dc86429..25cbaaa 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -56,7 +56,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mx25l12805d"; + compatible = "mxicy,mx25l12805d"; reg = <0>; spi-max-frequency = <50000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index 843eb47..e6e5ec4 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -32,7 +32,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mx25l4005a"; + compatible = "mxicy,mx25l4005a"; reg = <0>; spi-max-frequency = <20000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index 03fa24c..0a07af9 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -104,7 +104,7 @@ status = "okay"; adt7476: adt7476a@2e { - compatible = "adt7476"; + compatible = "adi,adt7476"; reg = <0x2e>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/kirkwood-nsa310a.dts index a5e7794..27ca6a7 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310a.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310a.dts @@ -94,7 +94,7 @@ status = "okay"; lm85: lm85@2e { - compatible = "lm85"; + compatible = "national,lm85"; reg = <0x2e>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index b88da93..0650bea 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -40,7 +40,7 @@ pinctrl-names = "default"; s35390a: s35390a@30 { - compatible = "s35390a"; + compatible = "sii,s35390a"; reg = <0x30>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts index b2f7cae..38520a2 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts @@ -52,7 +52,7 @@ pinctrl-names = "default"; s24c02: s24c02@50 { - compatible = "24c02"; + compatible = "atmel,24c02"; reg = <0x50>; }; }; -- cgit v1.1 From a6e03dd451c724f785277d8ecca5d1a0b886d892 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 26 Mar 2014 00:33:58 +0100 Subject: ARM: mvebu: ensure the mdio node has a clock reference on Armada 370/XP The mvmdio driver accesses some register of the Ethernet unit. It therefore takes a reference and enables a clock. However, on Armada 370/XP, no clock specification was given in the Device Tree, which leads the mvmdio driver to fail when being used as a module and loaded before the mvneta driver: it tries to access a register from a hardware unit that isn't clocked. Cc: stable@vger.kernel.org Signed-off-by: Thomas Petazzoni Link: https://lkml.kernel.org/r/1395790439-21332-2-git-send-email-thomas.petazzoni@free-electrons.com Acked-by: Andrew Lunn Acked-by: Gregory CLEMENT Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370-xp.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index bbb40f6..bb77970 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -230,6 +230,7 @@ #size-cells = <0>; compatible = "marvell,orion-mdio"; reg = <0x72004 0x4>; + clocks = <&gateclk 4>; }; eth1: ethernet@74000 { -- cgit v1.1 From 33faf20b8ebe2770f2d7b52796f5f35eeb87ab6f Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 26 Mar 2014 00:33:59 +0100 Subject: ARM: mvebu: ensure the mdio node has a clock reference on Armada 38x The mvmdio driver accesses some register of the Ethernet unit. It therefore takes a reference and enables a clock. However, on Armada 38x, no clock specification was given in the Device Tree, which leads the mvmdio driver to fail when being used as a module and loaded before the mvneta driver: it tries to access a register from a hardware unit that isn't clocked. Signed-off-by: Thomas Petazzoni Link: https://lkml.kernel.org/r/1395790439-21332-3-git-send-email-thomas.petazzoni@free-electrons.com Acked-by: Andrew Lunn Acked-by: Gregory CLEMENT Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-38x.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index a064f59..ca8813b 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -336,6 +336,7 @@ #size-cells = <0>; compatible = "marvell,orion-mdio"; reg = <0x72004 0x4>; + clocks = <&gateclk 4>; }; coredivclk: clock@e4250 { -- cgit v1.1 From b08eed0c4d7d70eae2f4f1ff518cc33643722a07 Mon Sep 17 00:00:00 2001 From: Rob Taylor Date: Mon, 7 Apr 2014 20:16:52 +0100 Subject: ARM: shmobile: lager: correct renesas,gpios to renesas,groups in sd[02] pfc Fix probable typo of renesas,groups in the lager dt. The kernel has no renesas,gpios but this should match renesas,groups. Signed-off-by: Rob Taylor [ben.dooks@codethink.co.uk: fixup description] Signed-off-by: Ben Dooks Acked-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790-lager.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 6e99eb2..d01048a 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -141,12 +141,12 @@ }; sdhi0_pins: sd0 { - renesas,gpios = "sdhi0_data4", "sdhi0_ctrl"; + renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; renesas,function = "sdhi0"; }; sdhi2_pins: sd2 { - renesas,gpios = "sdhi2_data4", "sdhi2_ctrl"; + renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; renesas,function = "sdhi2"; }; -- cgit v1.1 From 390403fd79821bbd0c3a0d83307df2be87047b36 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Thu, 10 Apr 2014 11:01:09 -0700 Subject: ARM: OMAP3: PM: remove access to PRM_VOLTCTRL register There is a solitary write to this register every wakeup from off-mode, which isn't doing anything, so remove it. Also note that modifying this register trashes any attempted voltage scaling configuration and the change probably should never have gotten merged in the first place. Cc: Nishanth Menon Cc: Kevin Hilman Cc: Paul Walmsley Signed-off-by: Tero Kristo [tony@atomide.com: updated comments to describe regression] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/pm34xx.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 1f3770a..87099bb 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -330,10 +330,6 @@ void omap_sram_idle(void) omap3_sram_restore_context(); omap2_sms_restore_context(); } - if (core_next_state == PWRDM_POWER_OFF) - omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK, - OMAP3430_GR_MOD, - OMAP3_PRM_VOLTCTRL_OFFSET); } omap3_intc_resume_idle(); -- cgit v1.1 From c6c56697ae4bf1226263c19e8353343d7083f40e Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Thu, 10 Apr 2014 10:18:17 +0300 Subject: ARM: OMAP3: hwmod data: Correct clock domains for USB modules OMAP3 doesn't contain "l3_init_clkdm" clock domain. Use the proper clock domains for USB Host and USB TLL modules. Gets rid of the following warnings during boot omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm omap_hwmod: usb_tll_hs: could not associate to clkdm l3_init_clkdm Reported-by: Nishanth Menon Cc: Paul Walmsley Signed-off-by: Roger Quadros Fixes: de231388cb80a8ef3e779bbfa0564ba0157b7377 ("ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP3") Cc: Keshava Munegowda Cc: Partha Basak Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index a123ff0..71ac7d5 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1964,7 +1964,7 @@ static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = { static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = { .name = "usb_host_hs", .class = &omap3xxx_usb_host_hs_hwmod_class, - .clkdm_name = "l3_init_clkdm", + .clkdm_name = "usbhost_clkdm", .mpu_irqs = omap3xxx_usb_host_hs_irqs, .main_clk = "usbhost_48m_fck", .prcm = { @@ -2047,7 +2047,7 @@ static struct omap_hwmod_irq_info omap3xxx_usb_tll_hs_irqs[] = { static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = { .name = "usb_tll_hs", .class = &omap3xxx_usb_tll_hs_hwmod_class, - .clkdm_name = "l3_init_clkdm", + .clkdm_name = "core_l4_clkdm", .mpu_irqs = omap3xxx_usb_tll_hs_irqs, .main_clk = "usbtll_fck", .prcm = { -- cgit v1.1 From 8e4cb9aac2ada7f8a986606703c34e2d573bb876 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Mon, 24 Mar 2014 16:31:52 +0530 Subject: ARM: AM43xx: fix dpll init in bypass mode On AM43xx, if a PLL is in bypass at kernel init, the code in omap2_get_dpll_rate() will not realize this and will try to calculate the clock rate using the multiplier and the divider, resulting in errors. omap2_init_dpll_parent() has similar issue. Add the missing soc_is_am43xx() check to make the code work on AM43xx. Signed-off-by: Tomi Valkeinen Signed-off-by: Sathya Prakash M R Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clkt_dpll.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c index 2649ce4..332af92 100644 --- a/arch/arm/mach-omap2/clkt_dpll.c +++ b/arch/arm/mach-omap2/clkt_dpll.c @@ -209,7 +209,7 @@ u8 omap2_init_dpll_parent(struct clk_hw *hw) if (v == OMAP3XXX_EN_DPLL_LPBYPASS || v == OMAP3XXX_EN_DPLL_FRBYPASS) return 1; - } else if (soc_is_am33xx() || cpu_is_omap44xx()) { + } else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx()) { if (v == OMAP4XXX_EN_DPLL_LPBYPASS || v == OMAP4XXX_EN_DPLL_FRBYPASS || v == OMAP4XXX_EN_DPLL_MNBYPASS) @@ -255,7 +255,7 @@ unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk) if (v == OMAP3XXX_EN_DPLL_LPBYPASS || v == OMAP3XXX_EN_DPLL_FRBYPASS) return __clk_get_rate(dd->clk_bypass); - } else if (soc_is_am33xx() || cpu_is_omap44xx()) { + } else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx()) { if (v == OMAP4XXX_EN_DPLL_LPBYPASS || v == OMAP4XXX_EN_DPLL_FRBYPASS || v == OMAP4XXX_EN_DPLL_MNBYPASS) -- cgit v1.1 From 3d36ad7e7a9be0d130c862727a052ed279046437 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Fri, 14 Mar 2014 14:45:17 +0530 Subject: ARM: OMAP2+: hwmod: fix missing braces in _init() Bug was introduced by commit 'f92d959: ARM: OMAP2+: hwmod: Extract no-idle and no-reset info from DT' There were 2 versions of the patch posted which resulted in the above commit. While v1 [1] had the bug, v2 [2] had it fixed. However v1 apparently seemed to have been pulled in by mistake introducing the bug. Given of_find_property() does return NULL when the node passed is NULL, it did not introduce any functional issues as such, just the fact that the second if check was executed unnecessarily. [1] https://www.mail-archive.com/linux-omap@vger.kernel.org/msg94220.html [2] http://www.spinics.net/lists/linux-omap/msg98490.html Cc: Nishanth Menon Signed-off-by: Rajendra Nayak Signed-off-by: Suman Anna Signed-off-by: Lokesh Vutla Fixes: f92d9597f781f6a5a39c73dc71604bd8a21c5299 ("ARM: OMAP2+: hwmod: Extract no-idle and no-reset info from DT") Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 1f33f5d..66c60fe 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2546,11 +2546,12 @@ static int __init _init(struct omap_hwmod *oh, void *data) return -EINVAL; } - if (np) + if (np) { if (of_find_property(np, "ti,no-reset-on-init", NULL)) oh->flags |= HWMOD_INIT_NO_RESET; if (of_find_property(np, "ti,no-idle-on-init", NULL)) oh->flags |= HWMOD_INIT_NO_IDLE; + } oh->_state = _HWMOD_STATE_INITIALIZED; -- cgit v1.1 From 07134a365f1c4be6e840a00ae452d1593f15c5fc Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Wed, 5 Mar 2014 14:25:50 +0100 Subject: ARM: dts: imx6: add PCIe interrupt mapping properties As defined by the common PCI bindings. Signed-off-by: Lucas Stach Acked-by: Arnd Bergmann Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 55cb926..e27408f 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -10,6 +10,8 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include + #include "skeleton.dtsi" / { @@ -138,6 +140,12 @@ 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */ num-lanes = <1>; interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>; clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi"; status = "disabled"; -- cgit v1.1 From 2b33319003bfd97decd9b4768ecfe70a6dfdba53 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 28 Mar 2014 02:09:13 -0300 Subject: ARM: dts: imx53-qsb-common: Fix memory region description On mx53qsb there are two DRAM chip selects: CS0 at 0x70000000 CS1 at 0xb0000000 Each bank has a 512MB DRAM, giving a total of 1GB of system DRAM. Fix the memory layout to describe the hardware appropriately. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53-qsb-common.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index 3f825a6..ede04fa 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -14,7 +14,8 @@ / { memory { - reg = <0x70000000 0x40000000>; + reg = <0x70000000 0x20000000>, + <0xb0000000 0x20000000>; }; display0: display@di0 { -- cgit v1.1 From 8668d49896cc19354917ff67503e72f3f48ffaaa Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 28 Mar 2014 02:09:14 -0300 Subject: ARM: dts: imx53-m53evk: Fix memory region description On m53evk there are two DRAM chip selects: CS0 at 0x70000000 CS1 at 0xb0000000 Each bank has a 512MB DRAM, giving a total of 1GB of system DRAM. Fix the memory layout to describe the hardware appropriately. Signed-off-by: Fabio Estevam Acked-by: Marek Vasut Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53-m53evk.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index f6d3ac3..7fa2d1b 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -17,7 +17,8 @@ compatible = "denx,imx53-m53evk", "fsl,imx53"; memory { - reg = <0x70000000 0x20000000>; + reg = <0x70000000 0x20000000>, + <0xb0000000 0x20000000>; }; soc { -- cgit v1.1 From 7b6b2f4bf76e72d0599bd0d4ca1c850f8308d50f Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Wed, 2 Apr 2014 19:05:37 +0200 Subject: ARM: dts: mx5: fix wrong stmpe-ts bindings Fix bindings for STMPE touchscreen controller to match the documented bindings and the actual bindings used by the driver. Signed-off-by: Stefan Agner Reviewed-by: Marek Vasut Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53-m53evk.dts | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index 7fa2d1b..d5d146a 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -194,17 +194,17 @@ irq-trigger = <0x1>; stmpe_touchscreen { - compatible = "stmpe,ts"; + compatible = "st,stmpe-ts"; reg = <0>; - ts,sample-time = <4>; - ts,mod-12b = <1>; - ts,ref-sel = <0>; - ts,adc-freq = <1>; - ts,ave-ctrl = <3>; - ts,touch-det-delay = <3>; - ts,settling = <4>; - ts,fraction-z = <7>; - ts,i-drive = <1>; + st,sample-time = <4>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,adc-freq = <1>; + st,ave-ctrl = <3>; + st,touch-det-delay = <3>; + st,settling = <4>; + st,fraction-z = <7>; + st,i-drive = <1>; }; }; -- cgit v1.1 From 54e8eaeec1227a024373e37315770cc79d69917b Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Fri, 28 Mar 2014 17:25:51 +0100 Subject: ARM: dts: imx: drop invalid size and address cells properties Those two properties should have been set to zero, which is the same as not specifying them. Having address-cells set to 1 causes OF interrupt mapping routines to add 1 to the interrupt-cells property and as result fail because all calculations are off by one. Signed-off-by: Lucas Stach Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl.dtsi | 2 -- arch/arm/boot/dts/imx6sl.dtsi | 2 -- 2 files changed, 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index e27408f..2d04a51 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -48,8 +48,6 @@ intc: interrupt-controller@00a01000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <1>; - #size-cells = <1>; interrupt-controller; reg = <0x00a01000 0x1000>, <0x00a00100 0x100>; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 3cb4941..d92df0a 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -68,8 +68,6 @@ intc: interrupt-controller@00a01000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <1>; - #size-cells = <1>; interrupt-controller; reg = <0x00a01000 0x1000>, <0x00a00100 0x100>; -- cgit v1.1 From c2bece3cb1215bdb68f2345f6a9b5d0b27c8724e Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Fri, 28 Mar 2014 17:52:52 +0100 Subject: ARM: imx6q-clk: parent lvds_gate from lvds_sel Allows fror proper refcounting of the parent clocks when enabling the clock output on CLK1/2 pads. Signed-off-by: Lucas Stach Reviewed-by: Marek Vasut Acked-by: Richard Zhu Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx6q.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index b0e7f9d..3ed67b5 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -208,8 +208,8 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) * the "output_enable" bit as a gate, even though it's really just * enabling clock output. */ - clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "dummy", base + 0x160, 10); - clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "dummy", base + 0x160, 11); + clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "lvds1_sel", base + 0x160, 10); + clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "lvds2_sel", base + 0x160, 11); /* name parent_name reg idx */ clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0); -- cgit v1.1 From 2e3b9650561ae791ca0bd8c5f4868ef4df3cb842 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 6 Apr 2014 23:32:25 +0100 Subject: ARM: dt: microsom: don't set bit 7 for ethernet mux settings Bit 6,7 are marked as reserved for the ethernet RGMII pins, so avoid setting these bits. Signed-off-by: Russell King Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi index a3cb2ff..d160666 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi @@ -26,25 +26,25 @@ /* GPIO16 -> AR8035 25MHz */ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0xc0000000 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x80000000 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1 /* AR8035 pin strapping: IO voltage: pull up */ - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 /* AR8035 pin strapping: PHYADDR#0: pull down */ - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x130b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030 /* AR8035 pin strapping: PHYADDR#1: pull down */ - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x130b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 /* AR8035 pin strapping: MODE#1: pull up */ - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 /* AR8035 pin strapping: MODE#3: pull up */ - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 /* AR8035 pin strapping: MODE#0: pull down */ - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030 /* * As the RMII pins are also connected to RGMII -- cgit v1.1 From 19f7cb6dec7408da8753bf3250098edab60cdbb6 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 7 Apr 2014 16:29:24 +0200 Subject: ARM: dts: imx6: edmqmx6: Fix usbotg id pin Signed-off-by: Lucas Stach Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index a63bbb3..39ffa766 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -293,7 +293,7 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 >; }; -- cgit v1.1 From 465ca5dc4ad57b40ea632aabb32bf81a66632c4a Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 7 Apr 2014 16:29:25 +0200 Subject: ARM: dts: imx6: edmqmx6: Do not use the OTG switch as VBUS regulator GPIO7_12 switches the D+/D- USB lines on and off. When we use this as VBUS regulator it means that USB device mode can never work as VBUS is never turned on in Device mode. Signed-off-by: Sascha Hauer Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index 39ffa766..af32944 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -40,13 +40,15 @@ regulator-always-on; }; - reg_usb_otg_vbus: regulator@1 { + reg_usb_otg_switch: regulator@1 { compatible = "regulator-fixed"; reg = <1>; - regulator-name = "usb_otg_vbus"; + regulator-name = "usb_otg_switch"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio7 12 0>; + regulator-boot-on; + regulator-always-on; }; reg_usb_host1: regulator@2 { @@ -348,7 +350,6 @@ }; &usbotg { - vbus-supply = <®_usb_otg_vbus>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; -- cgit v1.1 From 8dde78e8d62ac5b5b8c07cd965928536c3556bc0 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 7 Apr 2014 16:29:26 +0200 Subject: ARM: dts: imx6: edmqmx6: USB H1 only supports host mode Signed-off-by: Lucas Stach Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index af32944..e7762e4 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -346,6 +346,7 @@ &usbh1 { vbus-supply = <®_usb_host1>; disable-over-current; + dr_mode = "host"; status = "okay"; }; -- cgit v1.1 From 52d13453df9aef536da6b93c7253fd618292a1cf Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 7 Apr 2014 16:29:27 +0200 Subject: ARM: dts: imx6: edmqmx6: add second STMPE Signed-off-by: Lucas Stach Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 38 +++++++++++++++++++++++++-------- 1 file changed, 29 insertions(+), 9 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index e7762e4..e4ae38f 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -19,7 +19,10 @@ compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q"; aliases { - gpio7 = &stmpe_gpio; + gpio7 = &stmpe_gpio1; + gpio8 = &stmpe_gpio2; + stmpe-i2c0 = &stmpe1; + stmpe-i2c1 = &stmpe2; }; memory { @@ -67,23 +70,23 @@ led-blue { label = "blue"; - gpios = <&stmpe_gpio 8 GPIO_ACTIVE_HIGH>; + gpios = <&stmpe_gpio1 8 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; led-green { label = "green"; - gpios = <&stmpe_gpio 9 GPIO_ACTIVE_HIGH>; + gpios = <&stmpe_gpio1 9 GPIO_ACTIVE_HIGH>; }; led-pink { label = "pink"; - gpios = <&stmpe_gpio 10 GPIO_ACTIVE_HIGH>; + gpios = <&stmpe_gpio1 10 GPIO_ACTIVE_HIGH>; }; led-red { label = "red"; - gpios = <&stmpe_gpio 11 GPIO_ACTIVE_HIGH>; + gpios = <&stmpe_gpio1 11 GPIO_ACTIVE_HIGH>; }; }; }; @@ -101,7 +104,8 @@ clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2 - &pinctrl_stmpe>; + &pinctrl_stmpe1 + &pinctrl_stmpe2>; status = "okay"; pmic: pfuze100@08 { @@ -207,13 +211,25 @@ }; }; - stmpe: stmpe1601@40 { + stmpe1: stmpe1601@40 { compatible = "st,stmpe1601"; reg = <0x40>; interrupts = <30 0>; interrupt-parent = <&gpio3>; - stmpe_gpio: stmpe_gpio { + stmpe_gpio1: stmpe_gpio { + #gpio-cells = <2>; + compatible = "st,stmpe-gpio"; + }; + }; + + stmpe2: stmpe1601@44 { + compatible = "st,stmpe1601"; + reg = <0x44>; + interrupts = <2 0>; + interrupt-parent = <&gpio5>; + + stmpe_gpio2: stmpe_gpio { #gpio-cells = <2>; compatible = "st,stmpe-gpio"; }; @@ -275,10 +291,14 @@ >; }; - pinctrl_stmpe: stmpegrp { + pinctrl_stmpe1: stmpe1grp { fsl,pins = ; }; + pinctrl_stmpe2: stmpe2grp { + fsl,pins = ; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 -- cgit v1.1 From 0c658c48cbe952d2689211a09f456d7319e59b33 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 10 Apr 2014 15:14:14 +0800 Subject: ARM: dts: imx53-tx53: add IPU DI ports and endpoints MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With the recent imx-drm device tree binding changes, we need to add IPU DI ports and endpoints for adapting. Signed-off-by: Shawn Guo Acked-by: Lothar Waßmann --- arch/arm/boot/dts/imx53-tx53-x03x.dts | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts index 0217dde3..3b73e81 100644 --- a/arch/arm/boot/dts/imx53-tx53-x03x.dts +++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts @@ -25,12 +25,17 @@ soc { display: display@di0 { compatible = "fsl,imx-parallel-display"; - crtcs = <&ipu 0>; interface-pix-fmt = "rgb24"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rgb24_vga1>; status = "okay"; + port { + display0_in: endpoint { + remote-endpoint = <&ipu_di0_disp0>; + }; + }; + display-timings { VGA { clock-frequency = <25200000>; @@ -293,6 +298,10 @@ }; }; +&ipu_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + &kpp { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_kpp>; -- cgit v1.1 From 139412290de46a7d4ff3359c8989485840764572 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 10 Apr 2014 15:22:56 +0800 Subject: ARM: dts: imx6q-gw5xxx: remove dead 'crtcs' property Since commit (655b43c staging: imx-drm-core: Use OF graph to find components and connections between encoder and crtcs), 'crtcs' becomes a dead property. Remove it. Signed-off-by: Shawn Guo Acked-by: Tim Harvey --- arch/arm/boot/dts/imx6q-gw5400-a.dts | 3 --- arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 3 --- 2 files changed, 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 902f983..e51bb3f 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -487,9 +487,6 @@ &ldb { status = "okay"; - lvds-channel@0 { - crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>; - }; }; &pcie { diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 8e99c9a..035d3a8 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -436,9 +436,6 @@ &ldb { status = "okay"; - lvds-channel@0 { - crtcs = <&ipu1 0>, <&ipu1 1>; - }; }; &pcie { -- cgit v1.1 From fa1746ae3829ed8865a10a7fe3946ef91bddd458 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Date: Thu, 10 Apr 2014 10:03:40 +0200 Subject: ARM: dts: imx53: fix apparent copy/paste error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The 'remote-endpoint' property should point back to ipu_di1_lvds1 rather than ipu_di0_lvds0. Signed-off-by: Lothar Waßmann Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index b57ab57..a99b64b 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -430,7 +430,7 @@ port { lvds1_in: endpoint { - remote-endpoint = <&ipu_di0_lvds0>; + remote-endpoint = <&ipu_di1_lvds1>; }; }; }; -- cgit v1.1 From 2cd36711e2b9714c0bb500b4060714666f37ca2c Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 11 Apr 2014 09:09:39 -0300 Subject: ARM: dts: imx6sl-evk: Add an entry for MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11 In case the bootloader has incorrectly configured the ALT mode of MX6SL_PAD_ECSPI1_SS0 pad, we end up with the following probe error: m25p80 spi0.0: found mr25h256, expected m25p32 m25p80 spi0.0: mr25h256 (32 Kbytes) In order to avoid this issue, add an entry for MX6SL_PAD_ECSPI1_SS0 pad, so that kernel configures the ECSPI chip select as GPIO functionality, which results in correct SPI NOR probe. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sl-evk.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 864d8df..a8d9a93 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -282,6 +282,7 @@ MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x100b1 MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x100b1 MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x100b1 + MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11 0x80000000 >; }; -- cgit v1.1 From 308965f94d00b670ca3a0f799839a68412da34d9 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Fri, 11 Apr 2014 16:59:38 +0200 Subject: ARM: dts: vybrid: drop address and size cells from GIC node This is likely a copy-and-paste error from the ARM GIC documentation, that has already been fixed. address-cells should have been set to 0, as with the size cells. As having those properties set to 0 is the same thing as not specifying them, drop them completely. Signed-off-by: Lucas Stach Acked-by: Rob Herring Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610.dtsi | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 8048733..bb78e90 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -72,8 +72,6 @@ intc: interrupt-controller@40002000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <1>; - #size-cells = <1>; interrupt-controller; reg = <0x40003000 0x1000>, <0x40002100 0x100>; -- cgit v1.1 From 4b2b404309f90e1ba12b0b187ca2490be19a22a6 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Fri, 11 Apr 2014 09:56:46 +0800 Subject: ARM: dts: imx: add required #clock-cells for fixed-clock Per bindings of fixed-clock, #clock-cells is a required property. Let's add it for those fixed rate clocks. Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx25.dtsi | 1 + arch/arm/boot/dts/imx27-apf27.dts | 1 + arch/arm/boot/dts/imx27.dtsi | 1 + arch/arm/boot/dts/imx50.dtsi | 4 ++++ arch/arm/boot/dts/imx51.dtsi | 4 ++++ arch/arm/boot/dts/imx53.dtsi | 4 ++++ arch/arm/boot/dts/imx6qdl.dtsi | 3 +++ arch/arm/boot/dts/imx6sl.dtsi | 2 ++ arch/arm/boot/dts/vf610-twr.dts | 2 ++ arch/arm/boot/dts/vf610.dtsi | 2 ++ 10 files changed, 24 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 32f760e..ea323f0 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -56,6 +56,7 @@ osc { compatible = "fsl,imx-osc", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts index 09f57b3..73aae4f 100644 --- a/arch/arm/boot/dts/imx27-apf27.dts +++ b/arch/arm/boot/dts/imx27-apf27.dts @@ -29,6 +29,7 @@ osc26m { compatible = "fsl,imx-osc26m", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 6279e0b..137e010 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -48,6 +48,7 @@ osc26m { compatible = "fsl,imx-osc26m", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <26000000>; }; }; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 0c75fe3..9c89d1c 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -53,21 +53,25 @@ ckil { compatible = "fsl,imx-ckil", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; ckih1 { compatible = "fsl,imx-ckih1", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <22579200>; }; ckih2 { compatible = "fsl,imx-ckih2", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; osc { compatible = "fsl,imx-osc", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 5f8216d..150bb4e 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -50,21 +50,25 @@ ckil { compatible = "fsl,imx-ckil", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; ckih1 { compatible = "fsl,imx-ckih1", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; ckih2 { compatible = "fsl,imx-ckih2", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; osc { compatible = "fsl,imx-osc", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index a99b64b..9c2bff2 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -70,21 +70,25 @@ ckil { compatible = "fsl,imx-ckil", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; ckih1 { compatible = "fsl,imx-ckih1", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <22579200>; }; ckih2 { compatible = "fsl,imx-ckih2", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; osc { compatible = "fsl,imx-osc", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 2d04a51..eca0971 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -59,16 +59,19 @@ ckil { compatible = "fsl,imx-ckil", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; ckih1 { compatible = "fsl,imx-ckih1", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; osc { compatible = "fsl,imx-osc", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index d92df0a..d26b099 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -79,11 +79,13 @@ ckil { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; osc { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index 7dd1d6e..ded3610 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -25,11 +25,13 @@ clocks { audio_ext { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24576000>; }; enet_ext { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <50000000>; }; }; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index bb78e90..b8ce0aa7 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -45,11 +45,13 @@ sxosc { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; fxosc { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; -- cgit v1.1 From 9f85ff849c21b429c1e2137f2646f9cc667d8ded Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 13 Apr 2014 17:59:34 -0700 Subject: ARM: shmobile: lager: fixup SND_SOC_DAIFMT_CBx_CFx flags e1508289404ab6ca28e0dc931612600f0441c417 (ASoC: rcar: fixup SND_SOC_DAIFMT_CBx_CFx flags) corrected SND_SOC_DAIFMT_CBx_CFx definition. But then, Lager board was maintenanced other branch. This patch correct SND_SOC_DAIFMT_CBx_CFx flag for lager Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-lager.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index f0104bf..18c7e03 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -588,14 +588,12 @@ static struct asoc_simple_card_info rsnd_card_info = { .card = "SSI01-AK4643", .codec = "ak4642-codec.2-0012", .platform = "rcar_sound", - .daifmt = SND_SOC_DAIFMT_LEFT_J, + .daifmt = SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM, .cpu_dai = { .name = "rcar_sound", - .fmt = SND_SOC_DAIFMT_CBS_CFS, }, .codec_dai = { .name = "ak4642-hifi", - .fmt = SND_SOC_DAIFMT_CBM_CFM, .sysclk = 11289600, }, }; -- cgit v1.1 From 7b707277e734c553a8043e9b4d530eb47f4d60c8 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 13 Apr 2014 17:59:47 -0700 Subject: ARM: shmobile: armadillo800eva: fixup SND_SOC_DAIFMT_CBx_CFx flags c7a507eea1db1430476289f525f9c853d5d485e8 (ASoC: fsi: fixup SND_SOC_DAIFMT_CBx_CFx flags) exchanged sound flags, but armadillo800eva flags needs IB_NF. The recorded sound will be noise without this patch. Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-armadillo800eva.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 2858f38..486063d 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -992,6 +992,7 @@ static struct asoc_simple_card_info fsi_wm8978_info = { .platform = "sh_fsi2", .daifmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM, .cpu_dai = { + .fmt = SND_SOC_DAIFMT_IB_NF, .name = "fsia-dai", }, .codec_dai = { -- cgit v1.1 From b34f8624a7ddaca51a00d5bb35f55324e851b314 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 10 Apr 2014 16:21:02 +0200 Subject: ARM: ux500: update defconfig Update the ux500 defconfig to match the latest output of savedefconfig. Signed-off-by: Linus Walleij --- arch/arm/configs/u8500_defconfig | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 65f7788..d130a01 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -1,6 +1,6 @@ # CONFIG_SWAP is not set CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y @@ -10,7 +10,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_U8500=y CONFIG_MACH_HREFV60=y CONFIG_MACH_SNOWBALL=y -CONFIG_MACH_UX500_DT=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PREEMPT=y @@ -85,8 +84,6 @@ CONFIG_AB8500_USB=y CONFIG_USB_GADGET=y CONFIG_USB_ETH=m CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y -# CONFIG_MMC_BLOCK_BOUNCE is not set CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y -- cgit v1.1 From ccc3e2a463e25ccbbd6cc4dcfff23b8c81c669dc Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Wed, 26 Mar 2014 14:19:07 +0100 Subject: ARM: ux500: u8500_defconfig: Enable PARTITION_ADVANCED There are both (e)MMC/SD-card support in ux500, thus it's reasonable to support partitions for block devices as default. While updating the defconfig, we rebase it towards Kconfig changes. Signed-off-by: Ulf Hansson Signed-off-by: Linus Walleij --- arch/arm/configs/u8500_defconfig | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index d130a01..dac0a87 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -7,6 +7,7 @@ CONFIG_KALLSYMS_ALL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_U8500=y CONFIG_MACH_HREFV60=y CONFIG_MACH_SNOWBALL=y @@ -36,6 +37,8 @@ CONFIG_PHONET=y # CONFIG_WIRELESS is not set CONFIG_CAIF=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_SENSORS_BH1780=y @@ -107,8 +110,6 @@ CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_MISC_FILESYSTEMS is not set -- cgit v1.1 From f661e7733f8c45692147ea52a16c9c1856cf152b Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Wed, 26 Mar 2014 14:30:53 +0100 Subject: ARM: u300: u300_defconfig: Enable PARTITION_ADVANCED Since there are SD-card support in u300, it's reasonable to support partitions for block devices as default. While updating the defconfig, we rebase it towards Kconfig changes. Signed-off-by: Ulf Hansson Signed-off-by: Linus Walleij --- arch/arm/configs/u300_defconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index fd81a1b..aaa95ab 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -11,6 +11,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y # CONFIG_IOSCHED_CFQ is not set # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_U300=y @@ -21,7 +22,6 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072" CONFIG_CPU_IDLE=y -CONFIG_FPE_NWFPE=y # CONFIG_SUSPEND is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set @@ -64,8 +64,8 @@ CONFIG_TMPFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_INFO=y CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set CONFIG_TIMER_STATS=y # CONFIG_DEBUG_PREEMPT is not set -CONFIG_DEBUG_INFO=y -- cgit v1.1 From 7c60a6ed10e7d7146fbae52a7f5d59c05169ce4d Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 10 Apr 2014 16:31:53 +0200 Subject: ARM: ux500: configure in sensors This enables the STMicroelectronics MEMS sensors for accelerometer, gyroscope, magnetometer and pressure that are mounted on the Ux500 models. Signed-off-by: Linus Walleij --- arch/arm/configs/u8500_defconfig | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index dac0a87..726b1fa 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -103,6 +103,11 @@ CONFIG_STE_DMA40=y CONFIG_STAGING=y CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y CONFIG_HSEM_U8500=y +CONFIG_IIO=y +CONFIG_IIO_ST_ACCEL_3AXIS=y +CONFIG_IIO_ST_GYRO_3AXIS=y +CONFIG_IIO_ST_MAGN_3AXIS=y +CONFIG_IIO_ST_PRESS=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y -- cgit v1.1 From 1fb4e407b520a2344b92a680c75672c7900aedf8 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 14 Apr 2014 11:08:26 +0200 Subject: ARM: ux500: configure for CW1200 WLAN chip The CW1200 WLAN chip driver had been in the kernel for a while, we only need to activate it for the Ux500 properly. The latter require some elaborative work, but in the meantime, let's make sure we atleast compile it in. Signed-off-by: Linus Walleij --- arch/arm/configs/u8500_defconfig | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 726b1fa..d219d6a 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -34,7 +34,10 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_NETFILTER=y CONFIG_PHONET=y -# CONFIG_WIRELESS is not set +CONFIG_CFG80211=y +CONFIG_CFG80211_DEBUGFS=y +CONFIG_MAC80211=y +CONFIG_MAC80211_LEDS=y CONFIG_CAIF=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y @@ -45,7 +48,8 @@ CONFIG_SENSORS_BH1780=y CONFIG_NETDEVICES=y CONFIG_SMSC911X=y CONFIG_SMSC_PHY=y -# CONFIG_WLAN is not set +CONFIG_CW1200=y +CONFIG_CW1200_WLAN_SDIO=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set @@ -93,7 +97,6 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_LM3530=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_LP5521=y -CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AB8500=y -- cgit v1.1 From 3dedc5f5b11c567dbe2f31adb5119d1dfb8f51c9 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Mon, 14 Apr 2014 10:41:36 +0900 Subject: ARM: shmobile: r8a7778: Use clks as MSTP007 parent According to the documentation the parent clock of MSTP007 should be clks not clkp. Signed-off-by: Simon Horman Acked-by: Laurent Pinchart Signed-off-by: Mark Brown --- arch/arm/mach-shmobile/clock-r8a7778.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c index 2009a9b..9989b1b 100644 --- a/arch/arm/mach-shmobile/clock-r8a7778.c +++ b/arch/arm/mach-shmobile/clock-r8a7778.c @@ -170,7 +170,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP010] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 10, 0), /* SSI2 */ [MSTP009] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 9, 0), /* SSI3 */ [MSTP008] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 8, 0), /* SRU */ - [MSTP007] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 7, 0), /* HSPI */ + [MSTP007] = SH_CLK_MSTP32(&s_clk, MSTPCR0, 7, 0), /* HSPI */ }; static struct clk_lookup lookups[] = { -- cgit v1.1 From c39e1ef77c76729f34cdcb09bbb3a5096d91a740 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sat, 12 Apr 2014 06:07:23 +0100 Subject: ARM: 8024/1: Keep DEBUG_UART_{PHYS,VIRT} entries sorted This patch sorts the entries for DEBUG_UART_{PHYS,VIRT}. Signed-off-by: Alexander Shiyan Signed-off-by: Russell King --- arch/arm/Kconfig.debug | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 4a2fc0b..eab8ecb 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1030,9 +1030,9 @@ config DEBUG_UART_PHYS default 0x40100000 if DEBUG_PXA_UART1 default 0x42000000 if ARCH_GEMINI default 0x7c0003f8 if FOOTBRIDGE - default 0x80230000 if DEBUG_PICOXCELL_UART default 0x80070000 if DEBUG_IMX23_UART default 0x80074000 if DEBUG_IMX28_UART + default 0x80230000 if DEBUG_PICOXCELL_UART default 0x808c0000 if ARCH_EP93XX default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX @@ -1096,22 +1096,22 @@ config DEBUG_UART_VIRT default 0xfeb26000 if DEBUG_RK3X_UART1 default 0xfeb30c00 if DEBUG_KEYSTONE_UART0 default 0xfeb31000 if DEBUG_KEYSTONE_UART1 - default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE - default 0xfed60000 if DEBUG_RK29_UART0 - default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 - default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 default 0xfec02000 if DEBUG_SOCFPGA_UART + default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0 default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1 default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 default 0xfed12000 if ARCH_KIRKWOOD + default 0xfed60000 if DEBUG_RK29_UART0 + default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 + default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 default 0xfedc0000 if ARCH_EP93XX default 0xfee003f8 if FOOTBRIDGE default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART - default 0xfef36000 if DEBUG_HIGHBANK_UART default 0xfee82340 if ARCH_IOP13XX default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN + default 0xfef36000 if DEBUG_HIGHBANK_UART default 0xfefff700 if ARCH_IOP33X default 0xff003000 if DEBUG_U300_UART default DEBUG_UART_PHYS if !MMU -- cgit v1.1 From 244b478386260a8a9150b501bc97644e2e07f8d3 Mon Sep 17 00:00:00 2001 From: Jay Foad Date: Mon, 14 Apr 2014 16:23:15 +0100 Subject: ARM: 8026/1: Fix emulation of multiply accumulate instructions The emulation for single and double precision multiply accumulate instructions correctly normalised any denormal values in the operand registers, but failed to normalise the destination (accumulator) register. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=70501 Signed-off-by: Jay Foad Signed-off-by: Russell King --- arch/arm/vfp/vfpdouble.c | 2 ++ arch/arm/vfp/vfpsingle.c | 2 ++ 2 files changed, 4 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/vfp/vfpdouble.c b/arch/arm/vfp/vfpdouble.c index 6cac43b..423f56d 100644 --- a/arch/arm/vfp/vfpdouble.c +++ b/arch/arm/vfp/vfpdouble.c @@ -866,6 +866,8 @@ vfp_double_multiply_accumulate(int dd, int dn, int dm, u32 fpscr, u32 negate, ch vdp.sign = vfp_sign_negate(vdp.sign); vfp_double_unpack(&vdn, vfp_get_double(dd)); + if (vdn.exponent == 0 && vdn.significand) + vfp_double_normalise_denormal(&vdn); if (negate & NEG_SUBTRACT) vdn.sign = vfp_sign_negate(vdn.sign); diff --git a/arch/arm/vfp/vfpsingle.c b/arch/arm/vfp/vfpsingle.c index b252631..4f96c16 100644 --- a/arch/arm/vfp/vfpsingle.c +++ b/arch/arm/vfp/vfpsingle.c @@ -915,6 +915,8 @@ vfp_single_multiply_accumulate(int sd, int sn, s32 m, u32 fpscr, u32 negate, cha v = vfp_get_float(sd); pr_debug("VFP: s%u = %08x\n", sd, v); vfp_single_unpack(&vsn, v); + if (vsn.exponent == 0 && vsn.significand) + vfp_single_normalise_denormal(&vsn); if (negate & NEG_SUBTRACT) vsn.sign = vfp_sign_negate(vsn.sign); -- cgit v1.1 From de66b584042b8f2cfe4c34ef4faa804dcd8d5843 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 14 Apr 2014 16:18:18 +0200 Subject: ARM: shmobile: sh73a0: drop address cells from GIC node This is likely a copy-and-paste error from the ARM GIC documentation, that has already been fixed. address-cells should have been set to 0, as with the size cells. As having those properties set to 0 is the same thing as not specifying them, drop them completely. Signed-off-by: Lucas Stach Acked-by: Rob Herring Signed-off-by: Simon Horman --- arch/arm/boot/dts/sh73a0.dtsi | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index b7bd3b9..5ecf552 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -34,7 +34,6 @@ gic: interrupt-controller@f0001000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <1>; interrupt-controller; reg = <0xf0001000 0x1000>, <0xf0000100 0x100>; -- cgit v1.1 From 64c04a79c377e23449c59060727fcd34cc798eb6 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 14 Apr 2014 16:18:17 +0200 Subject: ARM: shmobile: r8a7740: drop address cells from GIC node This is likely a copy-and-paste error from the ARM GIC documentation, that has already been fixed. address-cells should have been set to 0, as with the size cells. As having those properties set to 0 is the same thing as not specifying them, drop them completely. Signed-off-by: Lucas Stach Acked-by: Rob Herring Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7740.dtsi | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 8280884..2551e94 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -28,7 +28,6 @@ gic: interrupt-controller@c2800000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <1>; interrupt-controller; reg = <0xc2800000 0x1000>, <0xc2000000 0x1000>; -- cgit v1.1 From d5dda0381f826326071b027f288372f682c24d55 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 14 Apr 2014 19:13:21 +0900 Subject: ARM: shmobile: koelsch: correct renesas,gpios to renesas,groups in sd[012] pfc Fix typo of renesas,groups in the koeslch dt. The kernel has no renesas,gpios but this should match renesas,groups. Noticed thanks to similar fix for Lager by Rob Taylor and Ben Dooks. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-koelsch.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index bdd73e6..de1b697 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -230,17 +230,17 @@ }; sdhi0_pins: sd0 { - renesas,gpios = "sdhi0_data4", "sdhi0_ctrl"; + renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; renesas,function = "sdhi0"; }; sdhi1_pins: sd1 { - renesas,gpios = "sdhi1_data4", "sdhi1_ctrl"; + renesas,groups = "sdhi1_data4", "sdhi1_ctrl"; renesas,function = "sdhi1"; }; sdhi2_pins: sd2 { - renesas,gpios = "sdhi2_data4", "sdhi2_ctrl"; + renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; renesas,function = "sdhi2"; }; -- cgit v1.1 From 17b9b3b9e88ac6564689283a08034faf2c048fdb Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 14 Apr 2014 16:20:39 +0200 Subject: ARM: imx6q: clk: Parent DI clocks to video PLL via di_pre_sel Route the video PLL to the display interface clocks via the di_pre_sel and di_sel muxes by default. Signed-off-by: Sascha Hauer Signed-off-by: Philipp Zabel Tested-by: Russell King Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx6q.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 3ed67b5..4a6fb65 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -445,6 +445,15 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]); } + clk_set_parent(clk[ipu1_di0_pre_sel], clk[pll5_video_div]); + clk_set_parent(clk[ipu1_di1_pre_sel], clk[pll5_video_div]); + clk_set_parent(clk[ipu2_di0_pre_sel], clk[pll5_video_div]); + clk_set_parent(clk[ipu2_di1_pre_sel], clk[pll5_video_div]); + clk_set_parent(clk[ipu1_di0_sel], clk[ipu1_di0_pre]); + clk_set_parent(clk[ipu1_di1_sel], clk[ipu1_di1_pre]); + clk_set_parent(clk[ipu2_di0_sel], clk[ipu2_di0_pre]); + clk_set_parent(clk[ipu2_di1_sel], clk[ipu2_di1_pre]); + /* * The gpmi needs 100MHz frequency in the EDO/Sync mode, * We can not get the 100MHz from the pll2_pfd0_352m. -- cgit v1.1 From 4591b13289b54fb5cbce84ee170f7390c576ef8f Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Mon, 14 Apr 2014 16:20:40 +0200 Subject: ARM: i.MX6: ipu_di_sel clocks can set parent rates To obtain exact pixel clocks, allow the DI clock selectors to influence the PLLs that they are derived from. Signed-off-by: Philipp Zabel Tested-by: Russell King Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx6q.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 4a6fb65..2b4d6ac 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -258,14 +258,14 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[ipu2_sel] = imx_clk_mux("ipu2_sel", base + 0x3c, 14, 2, ipu_sels, ARRAY_SIZE(ipu_sels)); clk[ldb_di0_sel] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT); clk[ldb_di1_sel] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT); - clk[ipu1_di0_pre_sel] = imx_clk_mux("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels)); - clk[ipu1_di1_pre_sel] = imx_clk_mux("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels)); - clk[ipu2_di0_pre_sel] = imx_clk_mux("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels)); - clk[ipu2_di1_pre_sel] = imx_clk_mux("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels)); - clk[ipu1_di0_sel] = imx_clk_mux("ipu1_di0_sel", base + 0x34, 0, 3, ipu1_di0_sels, ARRAY_SIZE(ipu1_di0_sels)); - clk[ipu1_di1_sel] = imx_clk_mux("ipu1_di1_sel", base + 0x34, 9, 3, ipu1_di1_sels, ARRAY_SIZE(ipu1_di1_sels)); - clk[ipu2_di0_sel] = imx_clk_mux("ipu2_di0_sel", base + 0x38, 0, 3, ipu2_di0_sels, ARRAY_SIZE(ipu2_di0_sels)); - clk[ipu2_di1_sel] = imx_clk_mux("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels, ARRAY_SIZE(ipu2_di1_sels)); + clk[ipu1_di0_pre_sel] = imx_clk_mux_flags("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT); + clk[ipu1_di1_pre_sel] = imx_clk_mux_flags("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT); + clk[ipu2_di0_pre_sel] = imx_clk_mux_flags("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT); + clk[ipu2_di1_pre_sel] = imx_clk_mux_flags("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT); + clk[ipu1_di0_sel] = imx_clk_mux_flags("ipu1_di0_sel", base + 0x34, 0, 3, ipu1_di0_sels, ARRAY_SIZE(ipu1_di0_sels), CLK_SET_RATE_PARENT); + clk[ipu1_di1_sel] = imx_clk_mux_flags("ipu1_di1_sel", base + 0x34, 9, 3, ipu1_di1_sels, ARRAY_SIZE(ipu1_di1_sels), CLK_SET_RATE_PARENT); + clk[ipu2_di0_sel] = imx_clk_mux_flags("ipu2_di0_sel", base + 0x38, 0, 3, ipu2_di0_sels, ARRAY_SIZE(ipu2_di0_sels), CLK_SET_RATE_PARENT); + clk[ipu2_di1_sel] = imx_clk_mux_flags("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels, ARRAY_SIZE(ipu2_di1_sels), CLK_SET_RATE_PARENT); clk[hsi_tx_sel] = imx_clk_mux("hsi_tx_sel", base + 0x30, 28, 1, hsi_tx_sels, ARRAY_SIZE(hsi_tx_sels)); clk[pcie_axi_sel] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels)); clk[ssi1_sel] = imx_clk_fixup_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup); -- cgit v1.1 From 6faff9b6bd3d2a279b806d721bb2257fdd2e6bf2 Mon Sep 17 00:00:00 2001 From: Max Schwarz Date: Sun, 9 Mar 2014 20:43:11 +0100 Subject: ARM: rockchip: rk3188: enable pull-ups on UART RX pins The default behaviour of the uart-rx pins on the rk3188 is to be pulled up and a lot of designs use diodes to even prevent them from being raised from the outside. Therefore change the rx-pin settings accordingly. This also fixes a uart receive problem on mass production Radxa Rock boards. Signed-off-by: Max Schwarz Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3188.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index bb36596..ed9a70a 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -149,7 +149,7 @@ uart0 { uart0_xfer: uart0-xfer { - rockchip,pins = , + rockchip,pins = , ; }; @@ -164,7 +164,7 @@ uart1 { uart1_xfer: uart1-xfer { - rockchip,pins = , + rockchip,pins = , ; }; @@ -179,7 +179,7 @@ uart2 { uart2_xfer: uart2-xfer { - rockchip,pins = , + rockchip,pins = , ; }; /* no rts / cts for uart2 */ @@ -187,7 +187,7 @@ uart3 { uart3_xfer: uart3-xfer { - rockchip,pins = , + rockchip,pins = , ; }; -- cgit v1.1 From 5c4348c1f959234664e4667f428cf82b3b8a7c2c Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Fri, 11 Apr 2014 11:44:24 +0200 Subject: ARM: rockchip: fix copy'n'paste error in smp error messages The error emitted when mapping the pmu failed, wrongly mentions the sram. Reported-by: Kent Borg Signed-off-by: Heiko Stuebner --- arch/arm/mach-rockchip/platsmp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c index dbfa5a2..072842f 100644 --- a/arch/arm/mach-rockchip/platsmp.c +++ b/arch/arm/mach-rockchip/platsmp.c @@ -152,7 +152,7 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus) node = of_find_compatible_node(NULL, NULL, "rockchip,rk3066-pmu"); if (!node) { - pr_err("%s: could not find sram dt node\n", __func__); + pr_err("%s: could not find pmu dt node\n", __func__); return; } -- cgit v1.1 From ada76576404330413eaeb864a265ad250af48d8f Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 1 Apr 2014 13:37:27 +0300 Subject: ARM: dts: omap5: Add clocks to USB3 PHY node The USB3 PHY driver (ti-pipe3) was updated so that the relevant clock phandles are expected in the DT node. Provide the necessary clocks. Reported-by: Kishon Vijay Abraham I Signed-off-by: Roger Quadros Acked-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 6f3de22..4db56f3 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -813,6 +813,12 @@ <0x4a084c00 0x40>; reg-names = "phy_rx", "phy_tx", "pll_ctrl"; ctrl-module = <&omap_control_usb3phy>; + clocks = <&usb_phy_cm_clk32k>, + <&sys_clkin>, + <&usb_otg_ss_refclk960m>; + clock-names = "wkupclk", + "sysclk", + "refclk"; #phy-cells = <0>; }; }; -- cgit v1.1 From 8c0b4fd89ead67f5aca63abbadc81dd316b6462c Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 2 Apr 2014 16:46:25 +0300 Subject: ARM: dts: dra7xx-clocks: Correct mcasp2_ahclkx_mux bit-shift The correct bit is 24 for AHCLKX. Signed-off-by: Peter Ujfalusi Acked-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7xx-clocks.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index e96da9a..cfb8fc7 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -1640,7 +1640,7 @@ #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; - ti,bit-shift = <28>; + ti,bit-shift = <24>; reg = <0x1860>; }; -- cgit v1.1 From 3348e28ddc0eb9749365d6e7ff9f1828667622e3 Mon Sep 17 00:00:00 2001 From: Sebastian Reichel Date: Tue, 8 Apr 2014 22:51:18 +0200 Subject: ARM: OMAP2+: N900: remove omapdss init for DT boot Do not try to initialize display for DT boot, since omapdss is now initialized via Device Tree. Without this patch the display subsystem does not properly come up. Signed-off-by: Sebastian Reichel Acked-by: Tomi Valkeinen Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-rx51-video.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c index 43a90c8..9cfebc5 100644 --- a/arch/arm/mach-omap2/board-rx51-video.c +++ b/arch/arm/mach-omap2/board-rx51-video.c @@ -48,7 +48,7 @@ static struct omap_dss_board_info rx51_dss_board_info = { static int __init rx51_video_init(void) { - if (!machine_is_nokia_rx51() && !of_machine_is_compatible("nokia,omap3-n900")) + if (!machine_is_nokia_rx51()) return 0; if (omap_mux_init_gpio(RX51_LCD_RESET_GPIO, OMAP_PIN_OUTPUT)) { -- cgit v1.1 From 365c107dcbd825739b88ef46cf4249a3dcb57fee Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 1 Apr 2014 18:38:13 +0200 Subject: ARM: AM335X: EVM: fix pinmux documentation in devicetree Wrong documentation in pinmux description can be especially confusing. Keep it proper. Signed-off-by: Wolfram Sang Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-evm.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 28ae040..668b62f 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -301,8 +301,8 @@ am335x_evm_audio_pins: am335x_evm_audio_pins { pinctrl-single,pins = < - 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rx_dv.mcasp1_aclkx */ - 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_txd3.mcasp1_fsx */ + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ >; -- cgit v1.1 From 4b549bf8bba3a65499ef8673cb1955bf4faab0de Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 8 Apr 2014 11:20:17 +0200 Subject: ARM: dts: OMAP2+: remove uses of obsolete gpmc,device-nand Remove all remaining uses of gpmc,device-nand that have been added since the property was removed by commit f40739faba8e ("ARM: dts: OMAP2+: Simplify NAND support"). Signed-off-by: Johan Hovold Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-igep0033.dtsi | 1 - arch/arm/boot/dts/omap3-devkit8000.dts | 1 - arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 1 - 3 files changed, 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 7063311..06c822a 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -118,7 +118,6 @@ reg = <0 0 0>; /* CS0, offset 0 */ nand-bus-width = <8>; ti,nand-ecc-opt = "bch8"; - gpmc,device-nand = "true"; gpmc,device-width = <1>; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts index bf5a515..da402f0 100644 --- a/arch/arm/boot/dts/omap3-devkit8000.dts +++ b/arch/arm/boot/dts/omap3-devkit8000.dts @@ -112,7 +112,6 @@ reg = <0 0 0>; /* CS0, offset 0 */ nand-bus-width = <16>; - gpmc,device-nand; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <44>; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index 6369d9f..cc1dce6 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -368,7 +368,6 @@ /* no elm on omap3 */ gpmc,mux-add-data = <0>; - gpmc,device-nand; gpmc,device-width = <2>; gpmc,wait-pin = <0>; gpmc,wait-monitoring-ns = <0>; -- cgit v1.1 From a2f8d6b303213a98436455aece7e14cdd1240629 Mon Sep 17 00:00:00 2001 From: Leigh Brown Date: Wed, 16 Apr 2014 12:26:35 +0100 Subject: ARM: dts: am335x: update USB DT references In "ARM: dts: am33xx: correcting dt node unit address for usb", the usb_ctrl_mod and cppi41dma nodes were updated with the correct register addresses. However, the dts files that reference these nodes were not updated, and those devices are no longer being enabled. This patch corrects the references for the affected dts files. Signed-off-by: Leigh Brown Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-bone-common.dtsi | 4 ++-- arch/arm/boot/dts/am335x-evm.dts | 4 ++-- arch/arm/boot/dts/am335x-evmsk.dts | 4 ++-- arch/arm/boot/dts/am335x-igep0033.dtsi | 4 ++-- 4 files changed, 8 insertions(+), 8 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index e3f27ec..2e7d932 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -183,7 +183,7 @@ &usb { status = "okay"; - control@44e10000 { + control@44e10620 { status = "okay"; }; @@ -204,7 +204,7 @@ dr_mode = "host"; }; - dma-controller@07402000 { + dma-controller@47402000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 668b62f..6028217 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -331,7 +331,7 @@ &usb { status = "okay"; - control@44e10000 { + control@44e10620 { status = "okay"; }; @@ -352,7 +352,7 @@ dr_mode = "host"; }; - dma-controller@07402000 { + dma-controller@47402000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index ec08f6f..ab23885 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -364,7 +364,7 @@ &usb { status = "okay"; - control@44e10000 { + control@44e10620 { status = "okay"; }; @@ -385,7 +385,7 @@ dr_mode = "host"; }; - dma-controller@07402000 { + dma-controller@47402000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 06c822a..9f22c18 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -201,7 +201,7 @@ &usb { status = "okay"; - control@44e10000 { + control@44e10620 { status = "okay"; }; @@ -222,7 +222,7 @@ dr_mode = "host"; }; - dma-controller@07402000 { + dma-controller@47402000 { status = "okay"; }; }; -- cgit v1.1 From 4883fb22796ba6661ca133d389bc14157a05f480 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Tue, 1 Apr 2014 15:44:34 +0530 Subject: ARM: OMAP2+: Fix config name for USB3 PHY commit a70143 (drivers: phy: usb3/pipe3: Adapt pipe3 driver to Generic PHY Framework) moved phy-omap-usb3 driver in drivers/usb/phy to drivers/phy and also renamed the file to phy-ti-pipe3. It also renamed the config from OMAP_USB3 to TI_PIPE3 in Kconfig. However the config name was not changed in omap2plus_defconfig. Fixed it here. Signed-off-by: Kishon Vijay Abraham I Acked-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index a966795..a4e8d01 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -226,7 +226,7 @@ CONFIG_USB_DWC3=m CONFIG_USB_TEST=y CONFIG_NOP_USB_XCEIV=y CONFIG_OMAP_USB2=y -CONFIG_OMAP_USB3=y +CONFIG_TI_PIPE3=y CONFIG_AM335X_PHY_USB=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DEBUG=y -- cgit v1.1 From 5c5be9db5321a457c8beee019548cb396baf81d4 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 28 Mar 2014 11:11:37 +0100 Subject: ARM: dts: Grammar /is uses/ is used/ Signed-off-by: Geert Uytterhoeven Cc: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am33xx.dtsi | 2 +- arch/arm/boot/dts/dra7.dtsi | 2 +- arch/arm/boot/dts/omap4.dtsi | 2 +- arch/arm/boot/dts/omap5.dtsi | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 9770e35..0c2034f 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -72,7 +72,7 @@ }; /* - * The soc node represents the soc top level view. It is uses for IPs + * The soc node represents the soc top level view. It is used for IPs * that are not memory mapped in the MPU view or for the MPU itself. */ soc { diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 1c0f8e1..f56c96a 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -80,7 +80,7 @@ }; /* - * The soc node represents the soc top level view. It is uses for IPs + * The soc node represents the soc top level view. It is used for IPs * that are not memory mapped in the MPU view or for the MPU itself. */ soc { diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 27fcac8..de282e5 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -72,7 +72,7 @@ }; /* - * The soc node represents the soc top level view. It is uses for IPs + * The soc node represents the soc top level view. It is used for IPs * that are not memory mapped in the MPU view or for the MPU itself. */ soc { diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 4db56f3..e2526b8 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -93,7 +93,7 @@ }; /* - * The soc node represents the soc top level view. It is uses for IPs + * The soc node represents the soc top level view. It is used for IPs * that are not memory mapped in the MPU view or for the MPU itself. */ soc { -- cgit v1.1 From b7ab524b9340ed3775a53e52987a3d3f1056df7c Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 28 Mar 2014 11:11:39 +0100 Subject: ARM: dts: Grammar /that will/it will/ Signed-off-by: Geert Uytterhoeven Cc: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am33xx.dtsi | 4 ++-- arch/arm/boot/dts/dra7.dtsi | 2 +- arch/arm/boot/dts/omap3.dtsi | 2 +- arch/arm/boot/dts/omap4.dtsi | 2 +- arch/arm/boot/dts/omap5.dtsi | 2 +- 5 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 0c2034f..07f283c 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -94,8 +94,8 @@ /* * XXX: Use a flat representation of the AM33XX interconnect. - * The real AM33XX interconnect network is quite complex.Since - * that will not bring real advantage to represent that in DT + * The real AM33XX interconnect network is quite complex. Since + * it will not bring real advantage to represent that in DT * for the moment, just use a fake OCP bus entry to represent * the whole bus hierarchy. */ diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index f56c96a..149b550 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -94,7 +94,7 @@ /* * XXX: Use a flat representation of the SOC interconnect. * The real OMAP interconnect network is quite complex. - * Since that will not bring real advantage to represent that in DT for + * Since it will not bring real advantage to represent that in DT for * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. */ diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 5e5790f..acb9019 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -74,7 +74,7 @@ /* * XXX: Use a flat representation of the OMAP3 interconnect. * The real OMAP interconnect network is quite complex. - * Since that will not bring real advantage to represent that in DT for + * Since it will not bring real advantage to represent that in DT for * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. */ diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index de282e5..649b5cd 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -96,7 +96,7 @@ /* * XXX: Use a flat representation of the OMAP4 interconnect. * The real OMAP interconnect network is quite complex. - * Since that will not bring real advantage to represent that in DT for + * Since it will not bring real advantage to represent that in DT for * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. */ diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index e2526b8..f8c9855 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -107,7 +107,7 @@ /* * XXX: Use a flat representation of the OMAP3 interconnect. * The real OMAP interconnect network is quite complex. - * Since that will not bring real advantage to represent that in DT for + * Since it will not bring real advantage to represent that in DT for * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. */ -- cgit v1.1 From ef78f3869c37c480f1d58462a760a40dabc823f4 Mon Sep 17 00:00:00 2001 From: Robert Nelson Date: Tue, 15 Apr 2014 10:09:59 -0500 Subject: ARM: dts: Add support for the BeagleBoard xM A/B BeagleBoard xM A/B has an inverted usb hub enable line vs the xM C Signed-off-by: Robert Nelson [tony@atomide.com: updated for missing bracket] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/omap3-beagle-xm-ab.dts | 16 ++++++++++++++++ 2 files changed, 17 insertions(+) create mode 100644 arch/arm/boot/dts/omap3-beagle-xm-ab.dts (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 35c146f..0bdeba3 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -246,6 +246,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap3-sbc-t3730.dtb \ omap3-devkit8000.dtb \ omap3-beagle-xm.dtb \ + omap3-beagle-xm-ab.dtb \ omap3-evm.dtb \ omap3-evm-37xx.dtb \ omap3-ldp.dtb \ diff --git a/arch/arm/boot/dts/omap3-beagle-xm-ab.dts b/arch/arm/boot/dts/omap3-beagle-xm-ab.dts new file mode 100644 index 0000000..7ac3bcf --- /dev/null +++ b/arch/arm/boot/dts/omap3-beagle-xm-ab.dts @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-beagle-xm.dts" + +/ { + /* HS USB Port 2 Power enable was inverted with the xM C */ + hsusb2_power: hsusb2_power_reg { + enable-active-high; + }; +}; -- cgit v1.1 From efe8072316a899294212055c147d3d9adca940a4 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 21 Apr 2014 19:26:13 -0700 Subject: ARM: OMAP2+: Fix oops for GPMC free If gpmc_cs_remap() fails we will get an error because we are calling release_resource() on an uninitialized resource. Let's fix that by checking the resource flags. And while at it, let's also make gpmc_cs_delete_mem() use the res pointer that we already have to avoid confusion. Without this patch we can get the following error: omap-gpmc 6e000000.gpmc: cannot remap GPMC CS 1 to 0x01000300 Unable to handle kernel NULL pointer dereference at virtual address 00000018 ... (gpmc_cs_free+0x94/0xc8) (gpmc_probe_generic_child+0x178/0x1ec) (gpmc_probe_dt+0x1bc/0x2cc) (gpmc_probe+0x250/0x44c) (platform_drv_probe+0x3c/0x6c) (really_probe+0x74/0x208) (driver_probe_device+0x34/0x50) (bus_for_each_drv+0x60/0x8c) (device_attach+0x80/0xa4) (bus_probe_device+0x88/0xb0) (device_add+0x320/0x450) (of_platform_device_create_pdata+0x80/0x9c) (of_platform_bus_create+0xd0/0x170) (of_platform_bus_create+0x12c/0x170) (of_platform_populate+0x60/0x98) (pdata_quirks_init+0x30/0x48) (customize_machine+0x20/0x48) (do_one_initcall+0x2c/0x14c) (do_basic_setup+0x98/0xd8) (kernel_init_freeable+0x12c/0x1e0) (kernel_init+0x8/0xf0) (ret_from_fork+0x14/0x2c) Code: e1a04000 e59f0070 eb195136 e5942010 (e5923018) Cc: Pekon Gupta Reviewed-by: Javier Martinez Canillas Signed-off-by: tony Lindgren --- arch/arm/mach-omap2/gpmc.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index ab43755..84e57e6 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -501,7 +501,7 @@ static int gpmc_cs_delete_mem(int cs) int r; spin_lock(&gpmc_mem_lock); - r = release_resource(&gpmc_cs_mem[cs]); + r = release_resource(res); res->start = 0; res->end = 0; spin_unlock(&gpmc_mem_lock); @@ -586,6 +586,8 @@ EXPORT_SYMBOL(gpmc_cs_request); void gpmc_cs_free(int cs) { + struct resource *res = &gpmc_cs_mem[cs]; + spin_lock(&gpmc_mem_lock); if (cs >= gpmc_cs_num || cs < 0 || !gpmc_cs_reserved(cs)) { printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs); @@ -594,7 +596,8 @@ void gpmc_cs_free(int cs) return; } gpmc_cs_disable_mem(cs); - release_resource(&gpmc_cs_mem[cs]); + if (res->flags) + release_resource(res); gpmc_cs_set_reserved(cs, 0); spin_unlock(&gpmc_mem_lock); } -- cgit v1.1 From b2bf5d484848450e7aa3332e268c5e874d9dc523 Mon Sep 17 00:00:00 2001 From: Soren Brinkmann Date: Fri, 4 Apr 2014 16:14:12 -0700 Subject: ARM: zynq: DT: Add 'clock-latency' property Specify the 'clock-latency' property to avoid certain cpufreq governors from refusing to work with the following error: ondemand governor failed, too long transition latency of HW, fallback to performance governor Reported-by: Mike Looijmans Signed-off-by: Soren Brinkmann Tested-by: Mike Looijmans Signed-off-by: Michal Simek --- arch/arm/boot/dts/zynq-7000.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 5111807..c39baef 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -24,6 +24,7 @@ device_type = "cpu"; reg = <0>; clocks = <&clkc 3>; + clock-latency = <1000>; operating-points = < /* kHz uV */ 666667 1000000 -- cgit v1.1 From 0f6faa3fc909482c2b40161de9bcf0d5460e54c5 Mon Sep 17 00:00:00 2001 From: Soren Brinkmann Date: Fri, 4 Apr 2014 14:27:56 -0700 Subject: ARM: zynq: dt: Add I2C nodes to Zynq device tree Signed-off-by: Soren Brinkmann Tested-by: Michal Simek Signed-off-by: Michal Simek --- arch/arm/boot/dts/zynq-7000.dtsi | 22 ++++++++++++ arch/arm/boot/dts/zynq-zc702.dts | 76 ++++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/zynq-zc706.dts | 68 +++++++++++++++++++++++++++++++++++ 3 files changed, 166 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index c39baef..c1176ab 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -55,6 +55,28 @@ interrupt-parent = <&intc>; ranges; + i2c0: zynq-i2c@e0004000 { + compatible = "cdns,i2c-r1p10"; + status = "disabled"; + clocks = <&clkc 38>; + interrupt-parent = <&intc>; + interrupts = <0 25 4>; + reg = <0xe0004000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: zynq-i2c@e0005000 { + compatible = "cdns,i2c-r1p10"; + status = "disabled"; + clocks = <&clkc 39>; + interrupt-parent = <&intc>; + interrupts = <0 48 4>; + reg = <0xe0005000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + }; + intc: interrupt-controller@f8f01000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index c913f77..5e09cee 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -34,6 +34,82 @@ phy-mode = "rgmii"; }; +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + i2cswitch@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + si570: clock-generator@5d { + #clock-cells = <0>; + compatible = "silabs,si570"; + temperature-stability = <50>; + reg = <0x5d>; + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + eeprom@54 { + compatible = "at,24c08"; + reg = <0x54>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + hwmon@52 { + compatible = "ti,ucd9248"; + reg = <52>; + }; + hwmon@53 { + compatible = "ti,ucd9248"; + reg = <53>; + }; + hwmon@54 { + compatible = "ti,ucd9248"; + reg = <54>; + }; + }; + }; +}; + &sdhci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index 88f62c5..4cc9913 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -35,6 +35,74 @@ phy-mode = "rgmii"; }; +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + i2cswitch@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + si570: clock-generator@5d { + #clock-cells = <0>; + compatible = "silabs,si570"; + temperature-stability = <50>; + reg = <0x5d>; + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + eeprom@54 { + compatible = "at,24c08"; + reg = <0x54>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + ucd90120@65 { + compatible = "ti,ucd90120"; + reg = <0x65>; + }; + }; + }; +}; + &sdhci0 { status = "okay"; }; -- cgit v1.1 From 0d3f7a2dd2f5cf9642982515e020c1aee2cf7af6 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Tue, 22 Apr 2014 08:23:58 -0400 Subject: locks: rename file-private locks to "open file description locks" File-private locks have been merged into Linux for v3.15, and *now* people are commenting that the name and macro definitions for the new file-private locks suck. ...and I can't even disagree. The names and command macros do suck. We're going to have to live with these for a long time, so it's important that we be happy with the names before we're stuck with them. The consensus on the lists so far is that they should be rechristened as "open file description locks". The name isn't a big deal for the kernel, but the command macros are not visually distinct enough from the traditional POSIX lock macros. The glibc and documentation folks are recommending that we change them to look like F_OFD_{GETLK|SETLK|SETLKW}. That lessens the chance that a programmer will typo one of the commands wrong, and also makes it easier to spot this difference when reading code. This patch makes the following changes that I think are necessary before v3.15 ships: 1) rename the command macros to their new names. These end up in the uapi headers and so are part of the external-facing API. It turns out that glibc doesn't actually use the fcntl.h uapi header, but it's hard to be sure that something else won't. Changing it now is safest. 2) make the the /proc/locks output display these as type "OFDLCK" Cc: Michael Kerrisk Cc: Christoph Hellwig Cc: Carlos O'Donell Cc: Stefan Metzmacher Cc: Andy Lutomirski Cc: Frank Filz Cc: Theodore Ts'o Signed-off-by: Jeff Layton --- arch/arm/kernel/sys_oabi-compat.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c index 702bd32..e90a314 100644 --- a/arch/arm/kernel/sys_oabi-compat.c +++ b/arch/arm/kernel/sys_oabi-compat.c @@ -203,9 +203,9 @@ asmlinkage long sys_oabi_fcntl64(unsigned int fd, unsigned int cmd, int ret; switch (cmd) { - case F_GETLKP: - case F_SETLKP: - case F_SETLKPW: + case F_OFD_GETLK: + case F_OFD_SETLK: + case F_OFD_SETLKW: case F_GETLK64: case F_SETLK64: case F_SETLKW64: -- cgit v1.1 From 80bb3ef109ff40a7593d9481c17de9bbc4d7c0e2 Mon Sep 17 00:00:00 2001 From: Xiangyu Lu Date: Tue, 15 Apr 2014 09:38:17 +0100 Subject: ARM: 8027/1: fix do_div() bug in big-endian systems In big-endian systems, "%1" get the most significant part of the value, cause the instruction to get the wrong result. When viewing ftrace record in big-endian ARM systems, we found that the timestamp errors: swapper-0 [001] 1325.970000: 0:120:R ==> [001] 16:120:R events/1 events/1-16 [001] 1325.970000: 16:120:S ==> [001] 0:120:R swapper swapper-0 [000] 1325.1000000: 0:120:R + [000] 15:120:R events/0 swapper-0 [000] 1325.1000000: 0:120:R ==> [000] 15:120:R events/0 swapper-0 [000] 1326.030000: 0:120:R + [000] 1150:120:R sshd swapper-0 [000] 1326.030000: 0:120:R ==> [000] 1150:120:R sshd When viewed ftrace records, it will call the do_div(n, base) function, which achieved arch/arm/include/asm/div64.h in. When n = 10000000, base = 1000000, in do_div(n, base) will execute "umull %Q0, %R0, %1, %Q2". Reviewed-by: Dave Martin Reviewed-by: Nicolas Pitre Cc: # 2.6.20+ Signed-off-by: Alex Wu Signed-off-by: Xiangyu Lu Signed-off-by: Russell King --- arch/arm/include/asm/div64.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/div64.h b/arch/arm/include/asm/div64.h index 191ada6..662c7bd 100644 --- a/arch/arm/include/asm/div64.h +++ b/arch/arm/include/asm/div64.h @@ -156,7 +156,7 @@ /* Select the best insn combination to perform the */ \ /* actual __m * __n / (__p << 64) operation. */ \ if (!__c) { \ - asm ( "umull %Q0, %R0, %1, %Q2\n\t" \ + asm ( "umull %Q0, %R0, %Q1, %Q2\n\t" \ "mov %Q0, #0" \ : "=&r" (__res) \ : "r" (__m), "r" (__n) \ -- cgit v1.1 From 56b700fd6f1e49149880fb1b6ffee0dca5be45fb Mon Sep 17 00:00:00 2001 From: Liu Hua Date: Fri, 18 Apr 2014 07:45:36 +0100 Subject: ARM: 8030/1: ARM : kdump : add arch_crash_save_vmcoreinfo For vmcore generated by LPAE enabled kernel, user space utility such as crash needs additional infomation to parse. So this patch add arch_crash_save_vmcoreinfo as what PAE enabled i386 linux does. Cc: Reviewed-by: Will Deacon Signed-off-by: Liu Hua Signed-off-by: Russell King --- arch/arm/kernel/machine_kexec.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index f0d180d..8cf0996 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -184,3 +184,10 @@ void machine_kexec(struct kimage *image) soft_restart(reboot_entry_phys); } + +void arch_crash_save_vmcoreinfo(void) +{ +#ifdef CONFIG_ARM_LPAE + VMCOREINFO_CONFIG(ARM_LPAE); +#endif +} -- cgit v1.1 From 4530e4b6a450af14973c2b0703edfb02d66cbd41 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Tue, 22 Apr 2014 00:25:35 +0100 Subject: ARM: 8032/1: bL_switcher: fix validation check before its activation The switcher should not depend on MAX_CLUSTER to determine ifit should be activated or not. In a multiplatform kernel binary it is possible to have dual-cluster and quad-cluster platforms configured in. In that case MAX_CLUSTER which is a build time limit should be 4 and that shouldn't prevent the switcher from working if the kernel is booted on a b.L dual-cluster system. In bL_switcher_halve_cpus() we already have a runtime validation check to make sure we're dealing with only two clusters, so booting on a quad cluster system will be caught and switcher activation aborted. However, the b.L switcher must ensure the MCPM layer is initialized on the booted hardware before doing anything. The mcpm_is_available() function is added to that effect. Signed-off-by: Nicolas Pitre Tested-by: Abhilash Kesavan Signed-off-by: Russell King --- arch/arm/common/bL_switcher.c | 6 ++---- arch/arm/common/mcpm_entry.c | 5 +++++ arch/arm/include/asm/mcpm.h | 7 +++++++ 3 files changed, 14 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/common/bL_switcher.c b/arch/arm/common/bL_switcher.c index 5774b6e..f01c0ee 100644 --- a/arch/arm/common/bL_switcher.c +++ b/arch/arm/common/bL_switcher.c @@ -797,10 +797,8 @@ static int __init bL_switcher_init(void) { int ret; - if (MAX_NR_CLUSTERS != 2) { - pr_err("%s: only dual cluster systems are supported\n", __func__); - return -EINVAL; - } + if (!mcpm_is_available()) + return -ENODEV; cpu_notifier(bL_switcher_hotplug_callback, 0); diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c index 1e361ab..86fd60f 100644 --- a/arch/arm/common/mcpm_entry.c +++ b/arch/arm/common/mcpm_entry.c @@ -48,6 +48,11 @@ int __init mcpm_platform_register(const struct mcpm_platform_ops *ops) return 0; } +bool mcpm_is_available(void) +{ + return (platform_ops) ? true : false; +} + int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster) { if (!platform_ops) diff --git a/arch/arm/include/asm/mcpm.h b/arch/arm/include/asm/mcpm.h index 608516e..a5ff410 100644 --- a/arch/arm/include/asm/mcpm.h +++ b/arch/arm/include/asm/mcpm.h @@ -54,6 +54,13 @@ void mcpm_set_early_poke(unsigned cpu, unsigned cluster, */ /** + * mcpm_is_available - returns whether MCPM is initialized and available + * + * This returns true or false accordingly. + */ +bool mcpm_is_available(void); + +/** * mcpm_cpu_power_up - make given CPU in given cluster runable * * @cpu: CPU number within given cluster -- cgit v1.1 From e3892e9160a6ae40abc45192df30f3e31b6dd0ff Mon Sep 17 00:00:00 2001 From: Victor Kamensky Date: Tue, 22 Apr 2014 02:25:36 +0100 Subject: ARM: 8033/1: fix big endian __pv_phys_pfn_offset size related issue Fix e26a9e00afc482b971afcaef1db8c9034d4d6d7c 'ARM: Better virt_to_page() handling' replaced __pv_phys_offset with __pv_phys_pfn_offset. Also note that size of __pv_phys_offset was quad but size of __pv_phys_pfn_offset is word. Instruction that used to update __pv_phys_offset which address is in r6 had to update low word of __pv_phys_offset so it used #LOW_OFFSET macro for store offset. Now when size of __pv_phys_pfn_offset is word, no difference between little endian and big endian should exist - i.e no offset should be used when __pv_phys_pfn_offset is stored. Note that for little endian image proposed change is noop, since in little endian case #LOW_OFFSET is defined 0 anyway. Reported-by: Taras Kondratiuk Signed-off-by: Victor Kamensky Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/kernel/head.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index f8c0883..591d6e4 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -587,7 +587,7 @@ __fixup_pv_table: add r6, r6, r3 @ adjust __pv_phys_pfn_offset address add r7, r7, r3 @ adjust __pv_offset address mov r0, r8, lsr #12 @ convert to PFN - str r0, [r6, #LOW_OFFSET] @ save computed PHYS_OFFSET to __pv_phys_pfn_offset + str r0, [r6] @ save computed PHYS_OFFSET to __pv_phys_pfn_offset strcc ip, [r7, #HIGH_OFFSET] @ save to __pv_offset high bits mov r6, r3, lsr #24 @ constant for add/sub instructions teq r3, r6, lsl #24 @ must be 16MiB aligned -- cgit v1.1 From 51aaf81fae8bf89b6bd277a244b5b43db9c730a0 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 22 Apr 2014 22:26:27 +0100 Subject: ARM: keep arch/arm/Kconfig and arch/arm/mm/Kconfig select entries sorted Signed-off-by: Russell King --- arch/arm/Kconfig | 10 +++++----- arch/arm/mm/Kconfig | 8 ++++---- 2 files changed, 9 insertions(+), 9 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ab438cb..53e99eb 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -30,9 +30,9 @@ config ARM select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT) select HAVE_ARCH_TRACEHOOK select HAVE_BPF_JIT + select HAVE_CC_STACKPROTECTOR select HAVE_CONTEXT_TRACKING select HAVE_C_RECORDMCOUNT - select HAVE_CC_STACKPROTECTOR select HAVE_DEBUG_KMEMLEAK select HAVE_DMA_API_DEBUG select HAVE_DMA_ATTRS @@ -422,8 +422,8 @@ config ARCH_EFM32 bool "Energy Micro efm32" depends on !MMU select ARCH_REQUIRE_GPIOLIB - select AUTO_ZRELADDR select ARM_NVIC + select AUTO_ZRELADDR select CLKSRC_OF select COMMON_CLK select CPU_V7M @@ -511,8 +511,8 @@ config ARCH_IXP4XX bool "IXP4xx-based" depends on MMU select ARCH_HAS_DMA_SET_COHERENT_MASK - select ARCH_SUPPORTS_BIG_ENDIAN select ARCH_REQUIRE_GPIOLIB + select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_MMIO select CPU_XSCALE select DMABOUNCE if PCI @@ -1575,8 +1575,8 @@ config BIG_LITTLE config BL_SWITCHER bool "big.LITTLE switcher support" depends on BIG_LITTLE && MCPM && HOTPLUG_CPU - select CPU_PM select ARM_CPU_SUSPEND + select CPU_PM help The big.LITTLE "switcher" provides the core functionality to transparently handle transition between a cluster of A15's @@ -1920,9 +1920,9 @@ config XEN depends on CPU_V7 && !CPU_V6 depends on !GENERIC_ATOMIC64 depends on MMU + select ARCH_DMA_ADDR_T_64BIT select ARM_PSCI select SWIOTLB_XEN - select ARCH_DMA_ADDR_T_64BIT help Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index f5ad9ee..5bf7c3c 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -420,29 +420,29 @@ config CPU_32v3 bool select CPU_USE_DOMAINS if MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP - select TLS_REG_EMUL if SMP || !MMU select NEED_KUSER_HELPERS + select TLS_REG_EMUL if SMP || !MMU config CPU_32v4 bool select CPU_USE_DOMAINS if MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP - select TLS_REG_EMUL if SMP || !MMU select NEED_KUSER_HELPERS + select TLS_REG_EMUL if SMP || !MMU config CPU_32v4T bool select CPU_USE_DOMAINS if MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP - select TLS_REG_EMUL if SMP || !MMU select NEED_KUSER_HELPERS + select TLS_REG_EMUL if SMP || !MMU config CPU_32v5 bool select CPU_USE_DOMAINS if MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP - select TLS_REG_EMUL if SMP || !MMU select NEED_KUSER_HELPERS + select TLS_REG_EMUL if SMP || !MMU config CPU_32v6 bool -- cgit v1.1 From 556d3f7f4d791cae54fd24ef28296e666f4c96a6 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Fri, 11 Apr 2014 12:25:39 +0200 Subject: ARM: add renameat2 syscall Signed-off-by: Miklos Szeredi [dropped arch/arm/include/asm/unistd.h changes --rmk] Signed-off-by: Russell King --- arch/arm/include/uapi/asm/unistd.h | 1 + arch/arm/kernel/calls.S | 1 + 2 files changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/include/uapi/asm/unistd.h b/arch/arm/include/uapi/asm/unistd.h index fb5584d..ba94446c 100644 --- a/arch/arm/include/uapi/asm/unistd.h +++ b/arch/arm/include/uapi/asm/unistd.h @@ -408,6 +408,7 @@ #define __NR_finit_module (__NR_SYSCALL_BASE+379) #define __NR_sched_setattr (__NR_SYSCALL_BASE+380) #define __NR_sched_getattr (__NR_SYSCALL_BASE+381) +#define __NR_renameat2 (__NR_SYSCALL_BASE+382) /* * This may need to be greater than __NR_last_syscall+1 in order to diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 166e945..8f51bdc 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -391,6 +391,7 @@ CALL(sys_finit_module) /* 380 */ CALL(sys_sched_setattr) CALL(sys_sched_getattr) + CALL(sys_renameat2) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted -- cgit v1.1 From ae107d06137ce210ea21d1423443d3638599f297 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 22 Apr 2014 20:40:25 +0200 Subject: dt: Fix binding typos in clock-names and interrupt-names s/interrupts-names/interrupt-names/g s/clocks-names/clock-names/g Some of the binding files and device tree files get this wrong and the kernel won't be able to pick it up. Fix them up now so that they don't get widely used. Signed-off-by: Geert Uytterhoeven Acked-by : Patrice Chotard Signed-off-by: Grant Likely --- arch/arm/boot/dts/am33xx.dtsi | 4 ++-- arch/arm/boot/dts/am4372.dtsi | 4 ++-- arch/arm/boot/dts/stih415-pinctrl.dtsi | 10 +++++----- arch/arm/boot/dts/stih416-pinctrl.dtsi | 10 +++++----- 4 files changed, 14 insertions(+), 14 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 9770e35..3bce3c9 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -802,7 +802,7 @@ <0x46000000 0x400000>; reg-names = "mpu", "dat"; interrupts = <80>, <81>; - interrupts-names = "tx", "rx"; + interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 8>, <&edma 9>; @@ -816,7 +816,7 @@ <0x46400000 0x400000>; reg-names = "mpu", "dat"; interrupts = <82>, <83>; - interrupts-names = "tx", "rx"; + interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 10>, <&edma 11>; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 36d523a..d1f8707 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -691,7 +691,7 @@ <0x46000000 0x400000>; reg-names = "mpu", "dat"; interrupts = <80>, <81>; - interrupts-names = "tx", "rx"; + interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 8>, <&edma 9>; @@ -705,7 +705,7 @@ <0x46400000 0x400000>; reg-names = "mpu", "dat"; interrupts = <82>, <83>; - interrupts-names = "tx", "rx"; + interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 10>, <&edma 11>; diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi index f09fb10..81df870 100644 --- a/arch/arm/boot/dts/stih415-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi @@ -49,7 +49,7 @@ reg = <0xfe61f080 0x4>; reg-names = "irqmux"; interrupts = ; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfe610000 0x5000>; PIO0: gpio@fe610000 { @@ -187,7 +187,7 @@ reg = <0xfee0f080 0x4>; reg-names = "irqmux"; interrupts = ; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfee00000 0x8000>; PIO5: gpio@fee00000 { @@ -282,7 +282,7 @@ reg = <0xfe82f080 0x4>; reg-names = "irqmux"; interrupts = ; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfe820000 0x8000>; PIO13: gpio@fe820000 { @@ -423,7 +423,7 @@ reg = <0xfd6bf080 0x4>; reg-names = "irqmux"; interrupts = ; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfd6b0000 0x3000>; PIO100: gpio@fd6b0000 { @@ -460,7 +460,7 @@ reg = <0xfd33f080 0x4>; reg-names = "irqmux"; interrupts = ; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfd330000 0x5000>; PIO103: gpio@fd330000 { diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi index aeea304..250d5ec 100644 --- a/arch/arm/boot/dts/stih416-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi @@ -53,7 +53,7 @@ reg = <0xfe61f080 0x4>; reg-names = "irqmux"; interrupts = ; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfe610000 0x6000>; PIO0: gpio@fe610000 { @@ -201,7 +201,7 @@ reg = <0xfee0f080 0x4>; reg-names = "irqmux"; interrupts = ; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfee00000 0x10000>; PIO5: gpio@fee00000 { @@ -333,7 +333,7 @@ reg = <0xfe82f080 0x4>; reg-names = "irqmux"; interrupts = ; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfe820000 0x6000>; PIO13: gpio@fe820000 { @@ -461,7 +461,7 @@ reg = <0xfd6bf080 0x4>; reg-names = "irqmux"; interrupts = ; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfd6b0000 0x3000>; PIO100: gpio@fd6b0000 { @@ -498,7 +498,7 @@ reg = <0xfd33f080 0x4>; reg-names = "irqmux"; interrupts = ; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfd330000 0x5000>; PIO103: gpio@fd330000 { -- cgit v1.1 From 59f0f119e85cfb173db518328b55efbac4087c9f Mon Sep 17 00:00:00 2001 From: Ritesh Harjani Date: Mon, 21 Apr 2014 12:17:27 +0530 Subject: arm: dma-mapping: Fix mapping size value 68efd7d2fb("arm: dma-mapping: remove order parameter from arm_iommu_create_mapping()") is causing kernel panic because it wrongly sets the value of mapping->size: Unable to handle kernel NULL pointer dereference at virtual address 000000a0 pgd = e7a84000 [000000a0] *pgd=00000000 ... PC is at bitmap_clear+0x48/0xd0 LR is at __iommu_remove_mapping+0x130/0x164 Fix it by correcting mapping->size value. Signed-off-by: Ritesh Harjani Acked-by: Laurent Pinchart Signed-off-by: Marek Szyprowski --- arch/arm/mm/dma-mapping.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index f62aa06..6b00be1 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -1963,8 +1963,8 @@ arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size) mapping->nr_bitmaps = 1; mapping->extensions = extensions; mapping->base = base; - mapping->size = bitmap_size << PAGE_SHIFT; mapping->bits = BITS_PER_BYTE * bitmap_size; + mapping->size = mapping->bits << PAGE_SHIFT; spin_lock_init(&mapping->lock); -- cgit v1.1 From fb677ef70b65e22cd4401d31b700a8b4041efae1 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 21 Apr 2014 19:26:13 -0700 Subject: ARM: OMAP2+: Fix GPMC remap for devices using an offset At least the smc91x driver expects the device to be at 0x300 offset from bus base address. This does not work currently for GPMC when booted in device tree mode as it attempts to remap the the allocated GPMC partition to the address configured by the device tree plus the device offset. Note that this works just fine when booted with legacy mode. Let's fix the issue by just ignoring any device specific offset while remapping. And let's make sure the remap address confirms to the GPMC 16MB minimum granularity as listed in the TRM for GPMC_CONFIG7 BASEADDRESS bits. Otherwise we can get something like this: omap-gpmc 6e000000.gpmc: cannot remap GPMC CS 1 to 0x01000300 Cc: Pekon Gupta Reviewed-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 84e57e6..9fe8c94 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -527,6 +527,14 @@ static int gpmc_cs_remap(int cs, u32 base) pr_err("%s: requested chip-select is disabled\n", __func__); return -ENODEV; } + + /* + * Make sure we ignore any device offsets from the GPMC partition + * allocated for the chip select and that the new base confirms + * to the GPMC 16MB minimum granularity. + */ + base &= ~(SZ_16M - 1); + gpmc_cs_get_memconf(cs, &old_base, &size); if (base == old_base) return 0; -- cgit v1.1 From bb6dd5757c12e9f3f25da971f1ea45c777ae79ab Mon Sep 17 00:00:00 2001 From: Heinrich Schuchardt Date: Mon, 14 Apr 2014 08:42:01 +0100 Subject: arm/mach-vexpress: array accessed out of bounds dcscb_allcpus_mask is an array of size 2. The index variable cluster has to be checked against this limit before accessing the array. Signed-off-by: Heinrich Schuchardt Acked-by: Nicolas Pitre Signed-off-by: Pawel Moll --- arch/arm/mach-vexpress/dcscb.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-vexpress/dcscb.c b/arch/arm/mach-vexpress/dcscb.c index 788495d..30b9933 100644 --- a/arch/arm/mach-vexpress/dcscb.c +++ b/arch/arm/mach-vexpress/dcscb.c @@ -51,12 +51,14 @@ static int dcscb_allcpus_mask[2]; static int dcscb_power_up(unsigned int cpu, unsigned int cluster) { unsigned int rst_hold, cpumask = (1 << cpu); - unsigned int all_mask = dcscb_allcpus_mask[cluster]; + unsigned int all_mask; pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); if (cpu >= 4 || cluster >= 2) return -EINVAL; + all_mask = dcscb_allcpus_mask[cluster]; + /* * Since this is called with IRQs enabled, and no arch_spin_lock_irq * variant exists, we need to disable IRQs manually here. @@ -101,11 +103,12 @@ static void dcscb_power_down(void) cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); cpumask = (1 << cpu); - all_mask = dcscb_allcpus_mask[cluster]; pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); BUG_ON(cpu >= 4 || cluster >= 2); + all_mask = dcscb_allcpus_mask[cluster]; + __mcpm_cpu_going_down(cpu, cluster); arch_spin_lock(&dcscb_lock); -- cgit v1.1 From c02b50e90be9f41d6802049a1a08246e9eb1a22c Mon Sep 17 00:00:00 2001 From: Andrea Adami Date: Tue, 8 Apr 2014 14:53:44 +0200 Subject: ARM: pxa: hx4700.h: include "irqs.h" for PXA_NR_BUILTIN_GPIO hx4700 needs the same fix as in 9705e74671f0e4f994d86b00cecf441917c64a66 "ARM: pxa: fix various compilation problems" Fix build errors. Initial one is: /linux/arch/arm/mach-pxa/include/mach/hx4700.h:18:32: error: 'PXA_NR_BUILTIN_GPIO' undeclared here (not in a function) | #define HX4700_ASIC3_GPIO_BASE PXA_NR_BUILTIN_GPIO Cc: stable@vger.kernel.org # v3.13+ Signed-off-by: Andrea Adami Signed-off-by: Linus Walleij Signed-off-by: Arnd Bergmann --- arch/arm/mach-pxa/include/mach/hx4700.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/include/mach/hx4700.h index 8bc0291..0e1bb46 100644 --- a/arch/arm/mach-pxa/include/mach/hx4700.h +++ b/arch/arm/mach-pxa/include/mach/hx4700.h @@ -14,6 +14,7 @@ #include #include +#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */ #define HX4700_ASIC3_GPIO_BASE PXA_NR_BUILTIN_GPIO #define HX4700_EGPIO_BASE (HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS) -- cgit v1.1 From 1be5f69216a20b3ed7ef8b0392ca97385bdca959 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Wed, 9 Apr 2014 09:01:12 -0500 Subject: ARM: spear: add __init to spear_clocksource_init() I get a build warning because spear_clocksource_init() calls clocksource_mmio_init(), but it doesn't have an __init annotation. Fix that. Signed-off-by: Alex Elder Acked-by: Viresh Kumar Signed-off-by: Arnd Bergmann --- arch/arm/mach-spear/time.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-spear/time.c b/arch/arm/mach-spear/time.c index 218ba5b..c4d0931 100644 --- a/arch/arm/mach-spear/time.c +++ b/arch/arm/mach-spear/time.c @@ -71,7 +71,7 @@ static void clockevent_set_mode(enum clock_event_mode mode, static int clockevent_next_event(unsigned long evt, struct clock_event_device *clk_event_dev); -static void spear_clocksource_init(void) +static void __init spear_clocksource_init(void) { u32 tick_rate; u16 val; -- cgit v1.1 From 6d0add405a6665e743fddf9c117fd6778f7a428e Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 16 Apr 2014 08:42:13 -0500 Subject: ARM: fix missing CLKSRC_OF on multi-platform In commit ddb902cc34593e (ARM: centralize common multi-platform kconfig options), CLKSRC_OF was removed from some platforms, but not added to ARCH_MULTIPLATFORM. Fix this. Reported-by: Lauri Hintsala Signed-off-by: Rob Herring Signed-off-by: Arnd Bergmann --- arch/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ab438cb..a48712e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -311,6 +311,7 @@ config ARCH_MULTIPLATFORM select ARM_HAS_SG_CHAIN select ARM_PATCH_PHYS_VIRT select AUTO_ZRELADDR + select CLKSRC_OF select COMMON_CLK select GENERIC_CLOCKEVENTS select MULTI_IRQ_HANDLER -- cgit v1.1 From af81c08c281bbc1dfc7b1fbf85f240fb7072724e Mon Sep 17 00:00:00 2001 From: Domenico Andreoli Date: Mon, 14 Apr 2014 11:55:01 +0200 Subject: ARM: Tidy up DTB Makefile entries Few things were out of order: - removed ARCH_BCM2835 duplicate - shuffled ARCH_BCM_5301X, ARCH_U8500 and ARCH_U300 around so to keep the list sorted Cc: Arnd Bergmann Cc: Olof Johansson Signed-by: Domenico Andreoli Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/Makefile | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 35c146f..c2d97b9 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -51,10 +51,9 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d36ek.dtb dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb +dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \ bcm21664-garnet.dtb -dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb -dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb dtb-$(CONFIG_ARCH_BERLIN) += \ berlin2-sony-nsz-gs7.dtb \ berlin2cd-google-chromecast.dtb @@ -294,13 +293,6 @@ dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ qcom-apq8074-dragonboard.dtb -dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ - ste-hrefprev60-stuib.dtb \ - ste-hrefprev60-tvk.dtb \ - ste-hrefv60plus-stuib.dtb \ - ste-hrefv60plus-tvk.dtb \ - ste-ccu8540.dtb \ - ste-ccu9540.dtb dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \ s3c6410-smdk6410.dtb @@ -369,9 +361,16 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra30-cardhu-a04.dtb \ tegra114-dalmore.dtb \ tegra124-venice2.dtb +dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb +dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ + ste-hrefprev60-stuib.dtb \ + ste-hrefprev60-tvk.dtb \ + ste-hrefv60plus-stuib.dtb \ + ste-hrefv60plus-tvk.dtb \ + ste-ccu8540.dtb \ + ste-ccu9540.dtb dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \ versatile-pb.dtb -dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ vexpress-v2p-ca9.dtb \ vexpress-v2p-ca15-tc1.dtb \ -- cgit v1.1 From cab4d50389c6b23fc3d7184d794856186bdc6651 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Mon, 7 Apr 2014 10:52:23 -0600 Subject: ARM: tegra: remove TEGRA_EMC_SCALING_ENABLE Commit a7cbe92cef27 ("ARM: tegra: remove tegra EMC scaling driver") removed the only user of TEGRA_EMC_SCALING_ENABLE. Remove its Kconfig entry too. Signed-off-by: Paul Bolle Signed-off-by: Stephen Warren Signed-off-by: Arnd Bergmann --- arch/arm/mach-tegra/Kconfig | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 92d660f..55b305d 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -70,7 +70,4 @@ config TEGRA_AHB which controls AHB bus master arbitration and some performance parameters(priority, prefech size). -config TEGRA_EMC_SCALING_ENABLE - bool "Enable scaling the memory frequency" - endmenu -- cgit v1.1 From 862f0eea38409ff0d7f226c1245b787e3f0e2607 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 1 Apr 2014 14:13:15 -0600 Subject: ARM: tegra: remove UART5/UARTE from tegra124.dtsi Tegra124 only has 4 UARTs. Parts of the documentation hint at a fifth UART, but this appears to be left-over from earlier SoC documentation. Remove the non-existent DT node for UART5. Cc: Signed-off-by: Stephen Warren Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/tegra124.dtsi | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index cf45a1a..6d540a0 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -233,19 +233,6 @@ status = "disabled"; }; - serial@0,70006400 { - compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; - reg = <0x0 0x70006400 0x0 0x40>; - reg-shift = <2>; - interrupts = ; - clocks = <&tegra_car TEGRA124_CLK_UARTE>; - resets = <&tegra_car 66>; - reset-names = "serial"; - dmas = <&apbdma 20>, <&apbdma 20>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - pwm@0,7000a000 { compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm"; reg = <0x0 0x7000a000 0x0 0x100>; -- cgit v1.1 From cf2e0a73ca9ad376825c013ebaa145608abc27d7 Mon Sep 17 00:00:00 2001 From: Punit Agrawal Date: Wed, 19 Mar 2014 12:43:25 +0000 Subject: ARM: vexpress/TC2: Convert OPP voltage to uV before storing The SPC stores voltage in mV while the code assumes it was returning uV. Convert the returned voltage to uV before storing. Also fix the comment depicting voltage to uV. Signed-off-by: Punit Agrawal Reviewed-by: Sudeep Holla Signed-off-by: Pawel Moll --- arch/arm/mach-vexpress/spc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c index c26ef5b..2c2754e 100644 --- a/arch/arm/mach-vexpress/spc.c +++ b/arch/arm/mach-vexpress/spc.c @@ -392,7 +392,7 @@ static irqreturn_t ve_spc_irq_handler(int irq, void *data) * +--------------------------+ * | 31 20 | 19 0 | * +--------------------------+ - * | u_volt | freq(kHz) | + * | m_volt | freq(kHz) | * +--------------------------+ */ #define MULT_FACTOR 20 @@ -414,7 +414,7 @@ static int ve_spc_populate_opps(uint32_t cluster) ret = ve_spc_read_sys_cfg(SYSCFG_SCC, off, &data); if (!ret) { opps->freq = (data & FREQ_MASK) * MULT_FACTOR; - opps->u_volt = data >> VOLT_SHIFT; + opps->u_volt = (data >> VOLT_SHIFT) * 1000; } else { break; } -- cgit v1.1 From c2f07fe64dc0da6d4ccc02d858695356bd685aeb Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Thu, 24 Apr 2014 22:54:58 +0100 Subject: ARM: 8038/1: iwmmxt: explicitly check for supported architectures iwmmxt.S requires special treatment of coprocessor access registers for PJ4 and XScale-based CPUs. It only checks for CPU_PJ4 and drops down to XScale-based treatment on all other architectures. As some PJ4B also come with iWMMXt and also need PJ4 treatment, rework the corresponding preprocessor directives to explicitly check for supported architectures and fail on unsupported ones. Signed-off-by: Sebastian Hesselbarth Tested-by: Thomas Petazzoni Tested-by: Kevin Hilman Signed-off-by: Russell King --- arch/arm/kernel/iwmmxt.S | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S index a087838..2452dd1 100644 --- a/arch/arm/kernel/iwmmxt.S +++ b/arch/arm/kernel/iwmmxt.S @@ -19,12 +19,16 @@ #include #include -#if defined(CONFIG_CPU_PJ4) +#if defined(CONFIG_CPU_PJ4) || defined(CONFIG_CPU_PJ4B) #define PJ4(code...) code #define XSC(code...) -#else +#elif defined(CONFIG_CPU_MOHAWK) || \ + defined(CONFIG_CPU_XSC3) || \ + defined(CONFIG_CPU_XSCALE) #define PJ4(code...) #define XSC(code...) code +#else +#error "Unsupported iWMMXt architecture" #endif #define MMX_WR0 (0x00) -- cgit v1.1 From 7d0656598924b2781fb96cdff566c9f844643fcd Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Thu, 24 Apr 2014 22:56:43 +0100 Subject: ARM: 8039/1: pj4: enable iWMMXt only if CONFIG_IWMMXT is set This fixes PJ4 coprocessor init to only expose iWMMXt capabilities, if the corresponding kernel support for iWMMXt is enabled. Signed-off-by: Sebastian Hesselbarth Tested-by: Thomas Petazzoni Tested-by: Kevin Hilman Signed-off-by: Russell King --- arch/arm/kernel/pj4-cp0.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/pj4-cp0.c b/arch/arm/kernel/pj4-cp0.c index fc72086..12352cd 100644 --- a/arch/arm/kernel/pj4-cp0.c +++ b/arch/arm/kernel/pj4-cp0.c @@ -45,7 +45,7 @@ static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t) return NOTIFY_DONE; } -static struct notifier_block iwmmxt_notifier_block = { +static struct notifier_block __maybe_unused iwmmxt_notifier_block = { .notifier_call = iwmmxt_do, }; @@ -79,17 +79,21 @@ static void __init pj4_cp_access_write(u32 value) */ static int __init pj4_cp0_init(void) { - u32 cp_access; + u32 __maybe_unused cp_access; if (!cpu_is_pj4()) return 0; +#ifndef CONFIG_IWMMXT + pr_info("PJ4 iWMMXt coprocessor detected, but kernel support is missing.\n"); +#else cp_access = pj4_cp_access_read() & ~0xf; pj4_cp_access_write(cp_access); printk(KERN_INFO "PJ4 iWMMXt coprocessor enabled.\n"); elf_hwcap |= HWCAP_IWMMXT; thread_register_notifier(&iwmmxt_notifier_block); +#endif return 0; } -- cgit v1.1 From e89f443b182c7a813a60d85dbf22d090231b5e6b Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Thu, 24 Apr 2014 22:57:25 +0100 Subject: ARM: 8040/1: pj4: properly detect existence of iWMMXt coprocessor commit fdb487f5c961b94486a78fa61fa28b8eff1954ab ("ARM: 8015/1: Add cpu_is_pj4 to distinguish PJ4 because it has some differences with V7") introduced a fix for checking PJ4 cpuid to not use PJ4 specific coprocessor access on non-PJ4 platforms. Unfortunately, this in turn broke Marvell Armada 370/XP, both comprising Marvell PJ4B CPUs without iWMMXt extension. Instead of only checking for cpuid, which may not be sufficient to determine iWMMXt support, the presence of iWMMXt coprocessors can be checked by enabling and reading the Coprocessor ID register (wCID, register 0 of CP1). Therefore this adds an explicit check for the presence and correct wCID value, before enabling iWMMXt capabilities. As a bonus, also print the iWMMXt version of a detected coprocessor. This has been tested to properly detect iWMMXt presence/absence on: - PJ4, CPUID 0x560f5815, wCID 0x56052001: Marvell Dove, iWMMXt v2 - PJ4B, CPUID 0x561f5811: Marvell Armada 370, no iWMMXt - PJ4B, CPUID 0x562f5841, wCID 0x56052001: Marvell Armada 1500, iWMMXt v2 - PJ4B, CPUID 0x562f5842: Marvell Armada XP, no iWMMXt Signed-off-by: Sebastian Hesselbarth Tested-by: Thomas Petazzoni Tested-by: Kevin Hilman Signed-off-by: Russell King --- arch/arm/kernel/pj4-cp0.c | 34 +++++++++++++++++++++++++++++++++- 1 file changed, 33 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/pj4-cp0.c b/arch/arm/kernel/pj4-cp0.c index 12352cd..8153e36 100644 --- a/arch/arm/kernel/pj4-cp0.c +++ b/arch/arm/kernel/pj4-cp0.c @@ -72,6 +72,33 @@ static void __init pj4_cp_access_write(u32 value) : "=r" (temp) : "r" (value)); } +static int __init pj4_get_iwmmxt_version(void) +{ + u32 cp_access, wcid; + + cp_access = pj4_cp_access_read(); + pj4_cp_access_write(cp_access | 0xf); + + /* check if coprocessor 0 and 1 are available */ + if ((pj4_cp_access_read() & 0xf) != 0xf) { + pj4_cp_access_write(cp_access); + return -ENODEV; + } + + /* read iWMMXt coprocessor id register p1, c0 */ + __asm__ __volatile__ ("mrc p1, 0, %0, c0, c0, 0\n" : "=r" (wcid)); + + pj4_cp_access_write(cp_access); + + /* iWMMXt v1 */ + if ((wcid & 0xffffff00) == 0x56051000) + return 1; + /* iWMMXt v2 */ + if ((wcid & 0xffffff00) == 0x56052000) + return 2; + + return -EINVAL; +} /* * Disable CP0/CP1 on boot, and let call_fpe() and the iWMMXt lazy @@ -80,17 +107,22 @@ static void __init pj4_cp_access_write(u32 value) static int __init pj4_cp0_init(void) { u32 __maybe_unused cp_access; + int vers; if (!cpu_is_pj4()) return 0; + vers = pj4_get_iwmmxt_version(); + if (vers < 0) + return 0; + #ifndef CONFIG_IWMMXT pr_info("PJ4 iWMMXt coprocessor detected, but kernel support is missing.\n"); #else cp_access = pj4_cp_access_read() & ~0xf; pj4_cp_access_write(cp_access); - printk(KERN_INFO "PJ4 iWMMXt coprocessor enabled.\n"); + pr_info("PJ4 iWMMXt v%d coprocessor enabled.\n", vers); elf_hwcap |= HWCAP_IWMMXT; thread_register_notifier(&iwmmxt_notifier_block); #endif -- cgit v1.1 From cd1711709fe98d3569e7f8215ba31adcfc3686ae Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Thu, 24 Apr 2014 22:58:00 +0100 Subject: ARM: 8041/1: pj4: fix cpu_is_pj4 check Commit fdb487f5c961b94486a78fa61fa28b8eff1954ab ("ARM: 8015/1: Add cpu_is_pj4 to distinguish PJ4 because it has some differences with V7") introduced a cpuid check for Marvell PJ4 processors to fix a regression caused by adding PJ4 based Marvell Dove into multi_v7. Unfortunately, this check is too narrow to catch PJ4 used on Dove itself and breaks iWMMXt support. This patch therefore relaxes the cpuid mask to match both PJ4 and PJ4B. Also, rework the given comment about PJ4/PJ4B modifications to be a little bit more specific about the differences. Signed-off-by: Sebastian Hesselbarth Tested-by: Thomas Petazzoni Tested-by: Kevin Hilman Signed-off-by: Russell King --- arch/arm/include/asm/cputype.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index c651e3b..4764344 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -222,22 +222,22 @@ static inline int cpu_is_xsc3(void) #endif /* - * Marvell's PJ4 core is based on V7 version. It has some modification - * for coprocessor setting. For this reason, we need a way to distinguish - * it. + * Marvell's PJ4 and PJ4B cores are based on V7 version, + * but require a specical sequence for enabling coprocessors. + * For this reason, we need a way to distinguish them. */ -#ifndef CONFIG_CPU_PJ4 -#define cpu_is_pj4() 0 -#else +#if defined(CONFIG_CPU_PJ4) || defined(CONFIG_CPU_PJ4B) static inline int cpu_is_pj4(void) { unsigned int id; id = read_cpuid_id(); - if ((id & 0xfffffff0) == 0x562f5840) + if ((id & 0xff0fff00) == 0x560f5800) return 1; return 0; } +#else +#define cpu_is_pj4() 0 #endif #endif -- cgit v1.1 From d93003e8e4e1fbbc8a06ec561a63f5aa105a4c45 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Thu, 24 Apr 2014 22:58:30 +0100 Subject: ARM: 8042/1: iwmmxt: allow to build iWMMXt on Marvell PJ4B Some Marvell PJ4B CPUs also implement iWMMXt extensions. With a proper check for iWMMXt coprocessors now in place, enable it by default on PJ4B. While at it, also allow to manually select the corresponding Kconfig option. Signed-off-by: Sebastian Hesselbarth Tested-by: Thomas Petazzoni Tested-by: Kevin Hilman Signed-off-by: Russell King --- arch/arm/Kconfig | 6 +++--- arch/arm/kernel/Makefile | 1 + 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 53e99eb..767a1aa 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1110,9 +1110,9 @@ config ARM_NR_BANKS default 8 config IWMMXT - bool "Enable iWMMXt support" if !CPU_PJ4 - depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 - default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 + bool "Enable iWMMXt support" + depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B + default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B help Enable support for iWMMXt context switching at run time if running on a CPU that supports it. diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index a766bcb..040619c 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -79,6 +79,7 @@ obj-$(CONFIG_CPU_XSCALE) += xscale-cp0.o obj-$(CONFIG_CPU_XSC3) += xscale-cp0.o obj-$(CONFIG_CPU_MOHAWK) += xscale-cp0.o obj-$(CONFIG_CPU_PJ4) += pj4-cp0.o +obj-$(CONFIG_CPU_PJ4B) += pj4-cp0.o obj-$(CONFIG_IWMMXT) += iwmmxt.o obj-$(CONFIG_PERF_EVENTS) += perf_regs.o obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o perf_event_cpu.o -- cgit v1.1 From 1cf35d47712dd5dc4d62c6ce984f04ac6eab0408 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 25 Apr 2014 16:05:40 -0700 Subject: mm: split 'tlb_flush_mmu()' into tlb flushing and memory freeing parts The mmu-gather operation 'tlb_flush_mmu()' has done two things: the actual tlb flush operation, and the batched freeing of the pages that the TLB entries pointed at. This splits the operation into separate phases, so that the forced batched flushing done by zap_pte_range() can now do the actual TLB flush while still holding the page table lock, but delay the batched freeing of all the pages to after the lock has been dropped. This in turn allows us to avoid a race condition between set_page_dirty() (as called by zap_pte_range() when it finds a dirty shared memory pte) and page_mkclean(): because we now flush all the dirty page data from the TLB's while holding the pte lock, page_mkclean() will be held up walking the (recently cleaned) page tables until after the TLB entries have been flushed from all CPU's. Reported-by: Benjamin Herrenschmidt Tested-by: Dave Hansen Acked-by: Hugh Dickins Cc: Peter Zijlstra Cc: Russell King - ARM Linux Cc: Tony Luck Signed-off-by: Linus Torvalds --- arch/arm/include/asm/tlb.h | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 0baf7f0..f1a0dac 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -98,15 +98,25 @@ static inline void __tlb_alloc_page(struct mmu_gather *tlb) } } -static inline void tlb_flush_mmu(struct mmu_gather *tlb) +static inline void tlb_flush_mmu_tlbonly(struct mmu_gather *tlb) { tlb_flush(tlb); +} + +static inline void tlb_flush_mmu_free(struct mmu_gather *tlb) +{ free_pages_and_swap_cache(tlb->pages, tlb->nr); tlb->nr = 0; if (tlb->pages == tlb->local) __tlb_alloc_page(tlb); } +static inline void tlb_flush_mmu(struct mmu_gather *tlb) +{ + tlb_flush_mmu_tlbonly(tlb); + tlb_flush_mmu_free(tlb); +} + static inline void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end) { -- cgit v1.1 From 4e4468fac4381b92eb333d94256e7fb8350f3de3 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 25 Apr 2014 11:46:04 +0100 Subject: ARM: KVM: disable KVM in Kconfig on big-endian systems KVM currently crashes and burns on big-endian hosts, so don't allow it to be selected until we've got that fixed. Cc: Marc Zyngier Signed-off-by: Will Deacon Signed-off-by: Christoffer Dall --- arch/arm/kvm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig index 466bd29..4be5bb1 100644 --- a/arch/arm/kvm/Kconfig +++ b/arch/arm/kvm/Kconfig @@ -23,7 +23,7 @@ config KVM select HAVE_KVM_CPU_RELAX_INTERCEPT select KVM_MMIO select KVM_ARM_HOST - depends on ARM_VIRT_EXT && ARM_LPAE + depends on ARM_VIRT_EXT && ARM_LPAE && !CPU_BIG_ENDIAN ---help--- Support hosting virtualized guest machines. You will also need to select one or more of the processor modules below. -- cgit v1.1 From 5d4e08c45a6cf8f1ab3c7fa375007635ac569165 Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Fri, 28 Mar 2014 14:25:19 +0000 Subject: arm: KVM: fix possible misalignment of PGDs and bounce page The kvm/mmu code shared by arm and arm64 uses kalloc() to allocate a bounce page (if hypervisor init code crosses page boundary) and hypervisor PGDs. The problem is that kalloc() does not guarantee the proper alignment. In the case of the bounce page, the page sized buffer allocated may also cross a page boundary negating the purpose and leading to a hang during kvm initialization. Likewise the PGDs allocated may not meet the minimum alignment requirements of the underlying MMU. This patch uses __get_free_page() to guarantee the worst case alignment needs of the bounce page and PGDs on both arm and arm64. Cc: # 3.10+ Signed-off-by: Mark Salter Acked-by: Marc Zyngier Signed-off-by: Christoffer Dall --- arch/arm/kvm/mmu.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index 80bb1e6..16f8049 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -42,6 +42,8 @@ static unsigned long hyp_idmap_start; static unsigned long hyp_idmap_end; static phys_addr_t hyp_idmap_vector; +#define pgd_order get_order(PTRS_PER_PGD * sizeof(pgd_t)) + #define kvm_pmd_huge(_x) (pmd_huge(_x) || pmd_trans_huge(_x)) static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) @@ -293,14 +295,14 @@ void free_boot_hyp_pgd(void) if (boot_hyp_pgd) { unmap_range(NULL, boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE); unmap_range(NULL, boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); - kfree(boot_hyp_pgd); + free_pages((unsigned long)boot_hyp_pgd, pgd_order); boot_hyp_pgd = NULL; } if (hyp_pgd) unmap_range(NULL, hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); - kfree(init_bounce_page); + free_page((unsigned long)init_bounce_page); init_bounce_page = NULL; mutex_unlock(&kvm_hyp_pgd_mutex); @@ -330,7 +332,7 @@ void free_hyp_pgds(void) for (addr = VMALLOC_START; is_vmalloc_addr((void*)addr); addr += PGDIR_SIZE) unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); - kfree(hyp_pgd); + free_pages((unsigned long)hyp_pgd, pgd_order); hyp_pgd = NULL; } @@ -1024,7 +1026,7 @@ int kvm_mmu_init(void) size_t len = __hyp_idmap_text_end - __hyp_idmap_text_start; phys_addr_t phys_base; - init_bounce_page = kmalloc(PAGE_SIZE, GFP_KERNEL); + init_bounce_page = (void *)__get_free_page(GFP_KERNEL); if (!init_bounce_page) { kvm_err("Couldn't allocate HYP init bounce page\n"); err = -ENOMEM; @@ -1050,8 +1052,9 @@ int kvm_mmu_init(void) (unsigned long)phys_base); } - hyp_pgd = kzalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL); - boot_hyp_pgd = kzalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL); + hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, pgd_order); + boot_hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, pgd_order); + if (!hyp_pgd || !boot_hyp_pgd) { kvm_err("Hyp mode PGD not allocated\n"); err = -ENOMEM; -- cgit v1.1