From 3c4d296e58a23687f2076d8ad531e6ae2b725846 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Mon, 30 Oct 2017 11:11:03 +0200 Subject: ARM: OMAP3: hwmod_data: add missing module_offs for MMC3 MMC3 hwmod data is missing the module_offs definition. MMC3 belongs under core, so add CORE_MOD for it. Signed-off-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index c327643..c12e7b5 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1656,6 +1656,7 @@ static struct omap_hwmod omap3xxx_mmc3_hwmod = { .main_clk = "mmchs3_fck", .prcm = { .omap2 = { + .module_offs = CORE_MOD, .prcm_reg_id = 1, .module_bit = OMAP3430_EN_MMC3_SHIFT, .idlest_reg_id = 1, -- cgit v1.1 From 6301d58477bc11116c78c9542871f27ae374278d Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Mon, 30 Oct 2017 11:11:04 +0200 Subject: ARM: OMAP2/3: CM: fix cm_split_idlest functionality cm_split_idlest doesn't take the CM base offset into account right now, causing it to read reserved registers which show idlestatus as active always. This will cause the wait_module_ready functionality to be effectively an expensive NOP, which will cause problems if the module hasn't really activated during its execution. Fix by adding the CM offset into the calculation so the wait_module_ready will access correct register. Signed-off-by: Tero Kristo Reported-by: Filip Matijevic Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/cm_common.c | 6 +++++- arch/arm/mach-omap2/prcm-common.h | 1 + 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c index d555791..83c6fa7 100644 --- a/arch/arm/mach-omap2/cm_common.c +++ b/arch/arm/mach-omap2/cm_common.c @@ -68,14 +68,17 @@ void __init omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2) int cm_split_idlest_reg(struct clk_omap_reg *idlest_reg, s16 *prcm_inst, u8 *idlest_reg_id) { + int ret; if (!cm_ll_data->split_idlest_reg) { WARN_ONCE(1, "cm: %s: no low-level function defined\n", __func__); return -EINVAL; } - return cm_ll_data->split_idlest_reg(idlest_reg, prcm_inst, + ret = cm_ll_data->split_idlest_reg(idlest_reg, prcm_inst, idlest_reg_id); + *prcm_inst -= cm_base.offset; + return ret; } /** @@ -337,6 +340,7 @@ int __init omap2_cm_base_init(void) if (mem) { mem->pa = res.start + data->offset; mem->va = data->mem + data->offset; + mem->offset = data->offset; } data->np = np; diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index ee7041d..ac9ee2e 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -529,6 +529,7 @@ struct omap_prcm_irq_setup { struct omap_domain_base { u32 pa; void __iomem *va; + s16 offset; }; /** -- cgit v1.1 From f0c96c6d40312b1a76cd36709dc3eb5948c1b97f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 30 Oct 2017 10:01:39 -0700 Subject: ARM: OMAP2+: Fix smatch found issue for omap_device The patch d85a2d61432a: "ARM: OMAP2+: Populate legacy resources for dma and smartreflex" from Oct 10, 2017, leads to the following Smatch complaint: arch/arm/mach-omap2/omap_device.c:453 omap_device_copy_resources() error: we previously assumed 'oh' could be null (see line 394) Fixes: d85a2d61432a: ("ARM: OMAP2+: Populate legacy resources for dma and smartreflex") Reported-by: Dan Carpenter Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_device.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index d45cbfd..184acd9 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -391,10 +391,8 @@ omap_device_copy_resources(struct omap_hwmod *oh, const char *name; int error, irq = 0; - if (!oh || !oh->od || !oh->od->pdev) { - error = -EINVAL; - goto error; - } + if (!oh || !oh->od || !oh->od->pdev) + return -EINVAL; np = oh->od->pdev->dev.of_node; if (!np) { -- cgit v1.1 From f568f6f554b817edafebf28a06b73ec9b4986dd1 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 9 Nov 2017 16:26:13 -0600 Subject: ARM: dts: omap: Add missing #phy-cells to usb-nop-xceiv MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit "usb-nop-xceiv" is using the phy binding, but is missing #phy-cells property. This is probably because the binding was the precursor to the phy binding. Fixes the following warning in OMAP dts files: Warning (phys_property): Missing property '#phy-cells' in node ... Signed-off-by: Rob Herring Cc: "Benoît Cousson" Cc: Tony Lindgren Cc: Enric Balletbo i Serra Cc: Javier Martinez Canillas Cc: linux-omap@vger.kernel.org Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/logicpd-som-lv.dtsi | 1 + arch/arm/boot/dts/omap3-beagle-xm.dts | 1 + arch/arm/boot/dts/omap3-beagle.dts | 1 + arch/arm/boot/dts/omap3-cm-t3x.dtsi | 2 ++ arch/arm/boot/dts/omap3-evm-common.dtsi | 1 + arch/arm/boot/dts/omap3-gta04.dtsi | 1 + arch/arm/boot/dts/omap3-igep0020-common.dtsi | 1 + arch/arm/boot/dts/omap3-igep0030-common.dtsi | 1 + arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 1 + arch/arm/boot/dts/omap3-overo-base.dtsi | 1 + arch/arm/boot/dts/omap3-pandora-common.dtsi | 1 + arch/arm/boot/dts/omap3-tao3530.dtsi | 1 + arch/arm/boot/dts/omap4-droid4-xt894.dts | 1 + arch/arm/boot/dts/omap4-duovero.dtsi | 1 + arch/arm/boot/dts/omap4-panda-common.dtsi | 1 + arch/arm/boot/dts/omap4-var-som-om44.dtsi | 1 + arch/arm/boot/dts/omap5-board-common.dtsi | 2 ++ arch/arm/boot/dts/omap5-cm-t54.dts | 2 ++ 18 files changed, 21 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index 26cce4d..4a79ce8 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -33,6 +33,7 @@ hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */ + #phy-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 683b96a..0349fcc 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -90,6 +90,7 @@ compatible = "usb-nop-xceiv"; reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */ vcc-supply = <&hsusb2_power>; + #phy-cells = <0>; }; tfp410: encoder0 { diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 4d2eaf8..3ca8991 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -64,6 +64,7 @@ compatible = "usb-nop-xceiv"; reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */ vcc-supply = <&hsusb2_power>; + #phy-cells = <0>; }; sound { diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index fccd538..08533fc 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -42,12 +42,14 @@ hsusb1_phy: hsusb1_phy { compatible = "usb-nop-xceiv"; vcc-supply = <&hsusb1_power>; + #phy-cells = <0>; }; /* HS USB Host PHY on PORT 2 */ hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; vcc-supply = <&hsusb2_power>; + #phy-cells = <0>; }; ads7846reg: ads7846-reg { diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index ff35803..26badcc 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -28,6 +28,7 @@ compatible = "usb-nop-xceiv"; reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */ vcc-supply = <&hsusb2_power>; + #phy-cells = <0>; }; leds { diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 4504908..3dc56fb 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -120,6 +120,7 @@ hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; + #phy-cells = <0>; }; tv0: connector { diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi index 667f962..ecbec23 100644 --- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi @@ -58,6 +58,7 @@ compatible = "usb-nop-xceiv"; reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */ vcc-supply = <&hsusb1_power>; + #phy-cells = <0>; }; tfp410: encoder { diff --git a/arch/arm/boot/dts/omap3-igep0030-common.dtsi b/arch/arm/boot/dts/omap3-igep0030-common.dtsi index e94d942..443f717 100644 --- a/arch/arm/boot/dts/omap3-igep0030-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0030-common.dtsi @@ -37,6 +37,7 @@ hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* gpio_54 */ + #phy-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index fa611a5..a87c0b6 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -51,6 +51,7 @@ hsusb1_phy: hsusb1_phy { compatible = "usb-nop-xceiv"; vcc-supply = <®_vcc3>; + #phy-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index f25e158..ac141fc 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -51,6 +51,7 @@ compatible = "usb-nop-xceiv"; reset-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>; /* gpio_183 */ vcc-supply = <&hsusb2_power>; + #phy-cells = <0>; }; /* Regulator to trigger the nPoweron signal of the Wifi module */ diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index 53e007a..cd53dc6 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -205,6 +205,7 @@ compatible = "usb-nop-xceiv"; reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* GPIO_16 */ vcc-supply = <&vaux2>; + #phy-cells = <0>; }; /* HS USB Host VBUS supply diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi index 9a601d1..6f5bd02 100644 --- a/arch/arm/boot/dts/omap3-tao3530.dtsi +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi @@ -46,6 +46,7 @@ compatible = "usb-nop-xceiv"; reset-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* gpio_162 */ vcc-supply = <&hsusb2_power>; + #phy-cells = <0>; }; sound { diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index 8b93d37..24a463f 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -73,6 +73,7 @@ /* HS USB Host PHY on PORT 1 */ hsusb1_phy: hsusb1_phy { compatible = "usb-nop-xceiv"; + #phy-cells = <0>; }; /* LCD regulator from sw5 source */ diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi index 6e6810c2..eb123b2 100644 --- a/arch/arm/boot/dts/omap4-duovero.dtsi +++ b/arch/arm/boot/dts/omap4-duovero.dtsi @@ -43,6 +43,7 @@ hsusb1_phy: hsusb1_phy { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */ + #phy-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&hsusb1phy_pins>; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 2b48e51..83b3168 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -85,6 +85,7 @@ hsusb1_phy: hsusb1_phy { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */ + #phy-cells = <0>; vcc-supply = <&hsusb1_power>; clocks = <&auxclk3_ck>; clock-names = "main_clk"; diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi index 6500bfc..10fce28 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi @@ -44,6 +44,7 @@ reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; /* gpio 177 */ vcc-supply = <&vbat>; + #phy-cells = <0>; clocks = <&auxclk3_ck>; clock-names = "main_clk"; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 7824b26..d9ca403 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -69,12 +69,14 @@ clocks = <&auxclk1_ck>; clock-names = "main_clk"; clock-frequency = <19200000>; + #phy-cells = <0>; }; /* HS USB Host PHY on PORT 3 */ hsusb3_phy: hsusb3_phy { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */ + #phy-cells = <0>; }; tpd12s015: encoder { diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index 552a5c4..73fcdda 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -62,12 +62,14 @@ hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; /* gpio3_76 HUB_RESET */ + #phy-cells = <0>; }; /* HS USB Host PHY on PORT 3 */ hsusb3_phy: hsusb3_phy { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 ETH_RESET */ + #phy-cells = <0>; }; leds { -- cgit v1.1 From f0e11ff8ff6595cb49bc18929b525d35721b8383 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 9 Nov 2017 16:26:14 -0600 Subject: ARM: dts: am33xx: Add missing #phy-cells to ti,am335x-usb-phy MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit "ti,am335x-usb-phy" is using the phy binding, but is missing #phy-cells property. Fixes the following warning in TI dts files: Warning (phys_property): Missing property '#phy-cells' in node ... Signed-off-by: Rob Herring Cc: "Benoît Cousson" Cc: Tony Lindgren Cc: linux-omap@vger.kernel.org Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am33xx.dtsi | 2 ++ arch/arm/boot/dts/dm814x.dtsi | 1 + 2 files changed, 3 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 0865355..29f3fbb 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -628,6 +628,7 @@ reg-names = "phy"; status = "disabled"; ti,ctrl_mod = <&usb_ctrl_mod>; + #phy-cells = <0>; }; usb0: usb@47401000 { @@ -676,6 +677,7 @@ reg-names = "phy"; status = "disabled"; ti,ctrl_mod = <&usb_ctrl_mod>; + #phy-cells = <0>; }; usb1: usb@47401800 { diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index 9708157..b7a11c1 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -75,6 +75,7 @@ reg = <0x47401300 0x100>; reg-names = "phy"; ti,ctrl_mod = <&usb_ctrl_mod>; + #phy-cells = <0>; }; usb0: usb@47401000 { -- cgit v1.1 From 60636a5d0fa2f8bc6d0c23c4027100ba20866f9b Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 10 Nov 2017 09:00:16 -0800 Subject: ARM: dts: Add remote-wakeup-connected for omap OHCI Add remote-wakeup-connected for omap OHCI as that's needed by ohci-platform driver. Cc: devicetree@vger.kernel.org Cc: Hans de Goede Cc: Rob Herring Cc: Sebastian Reichel Cc: Yoshihiro Shimoda Acked-by: Alan Stern Acked-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3.dtsi | 1 + arch/arm/boot/dts/omap4.dtsi | 1 + arch/arm/boot/dts/omap5.dtsi | 1 + 3 files changed, 3 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 90b5c71..bb33935 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -715,6 +715,7 @@ compatible = "ti,ohci-omap3"; reg = <0x48064400 0x400>; interrupts = <76>; + remote-wakeup-connected; }; usbhsehci: ehci@48064800 { diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 1dc5a76..27454b1 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -1083,6 +1083,7 @@ reg = <0x4a064800 0x400>; interrupt-parent = <&gic>; interrupts = ; + remote-wakeup-connected; }; usbhsehci: ehci@4a064c00 { diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index b86ac7d..86054e8 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -940,6 +940,7 @@ compatible = "ti,ohci-omap3"; reg = <0x4a064800 0x400>; interrupts = ; + remote-wakeup-connected; }; usbhsehci: ehci@4a064c00 { -- cgit v1.1 From 014d6da6cb2525d7f48fb08c705cb130cc7b5f4a Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Sun, 29 Oct 2017 12:49:05 +0100 Subject: ARM: dts: bcm283x: Fix DTC warnings about missing phy-cells This patch fixes the DTC warnings about missing property #phy-cells. Signed-off-by: Stefan Wahren Signed-off-by: Eric Anholt Reviewed-by: Eric Anholt --- arch/arm/boot/dts/bcm283x.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 013431e..dcde93c 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -639,5 +639,6 @@ usbphy: phy { compatible = "usb-nop-xceiv"; + #phy-cells = <0>; }; }; -- cgit v1.1 From 098f53050154498876ef3febde706ff5c8b25cf4 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 16 Nov 2017 14:35:57 +0100 Subject: ARM: dts: r8a779x: Add '#reset-cells' in cpg-mssr With the latest dtc, we get many warnings about the missing '#reset-cells' property in these controllers, e.g.: arch/arm/boot/dts/r8a7790-lager.dtb: Warning (resets_property): Missing property '#reset-cells' in node /clock-controller@e6150000 or bad phandle (referred from /can@e6e80000:resets[0]) arch/arm/boot/dts/r8a7792-blanche.dtb: Warning (resets_property): Missing property '#reset-cells' in node /soc/clock-controller@e6150000 or bad phandle (referred from /soc/dma-controller@e6700000:resets[0]) arch/arm/boot/dts/r8a7792-wheat.dtb: Warning (resets_property): Missing property '#reset-cells' in node /soc/clock-controller@e6150000 or bad phandle (referred from /soc/ethernet@e6800000:resets[0]) arch/arm/boot/dts/r8a7793-gose.dtb: Warning (resets_property): Missing property '#reset-cells' in node /clock-controller@e6150000 or bad phandle (referred from /gpio@e6050000:resets[0]) arch/arm/boot/dts/r8a7794-alt.dtb: Warning (resets_property): Missing property '#reset-cells' in node /clock-controller@e6150000 or bad phandle (referred from /i2c@e6500000:resets[0]) arch/arm/boot/dts/r8a7794-silk.dtb: Warning (resets_property): Missing property '#reset-cells' in node /clock-controller@e6150000 or bad phandle (referred from /interrupt-controller@e61c0000:resets[0]) This adds it for the three r8a779x chips that were lacking it. The binding mandates this as <1>, so this is the value I use. Signed-off-by: Arnd Bergmann [geert: Add fix for r8a7793.dtsi] Fixes: 34fbd2b12761d111 ("ARM: dts: r8a7790: Add reset control properties") Fixes: 6e11a322f1d7505d ("ARM: dts: r8a7792: Add reset control properties") Fixes: 84fb19e1d201ba86 ("ARM: dts: r8a7793: Add reset control properties") Fixes: 615beb759ca494a4 ("ARM: dts: r8a7794: Add reset control properties") Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 1 + arch/arm/boot/dts/r8a7792.dtsi | 1 + arch/arm/boot/dts/r8a7793.dtsi | 1 + arch/arm/boot/dts/r8a7794.dtsi | 1 + 4 files changed, 4 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 2f017fe..62baabd 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1201,6 +1201,7 @@ clock-names = "extal", "usb_extal"; #clock-cells = <2>; #power-domain-cells = <0>; + #reset-cells = <1>; }; prr: chipid@ff000044 { diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index 131f65b..3d080e0 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -829,6 +829,7 @@ clock-names = "extal"; #clock-cells = <2>; #power-domain-cells = <0>; + #reset-cells = <1>; }; }; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 58eae56..0cd1035 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -1088,6 +1088,7 @@ clock-names = "extal", "usb_extal"; #clock-cells = <2>; #power-domain-cells = <0>; + #reset-cells = <1>; }; rst: reset-controller@e6160000 { diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 905e50c9..5643976 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -1099,6 +1099,7 @@ clock-names = "extal", "usb_extal"; #clock-cells = <2>; #power-domain-cells = <0>; + #reset-cells = <1>; }; rst: reset-controller@e6160000 { -- cgit v1.1 From 77416ab35f5712382e5a792bfa1736ceb70d5bbb Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 7 Nov 2017 10:58:34 -0800 Subject: ARM: dts: NSP: Disable AHCI controller for HR NSP boards The AHCI controller is currently enabled for all of these boards: bcm958623hr and bcm958625hr would result in a hard hang on boot that we cannot get rid of. Since this does not appear to have an easy and simple fix, just disable the AHCI controller for now until this gets resolved. Fixes: 70725d6e97ac ("ARM: dts: NSP: Enable SATA on bcm958625hr") Fixes: d454c3762437 ("ARM: dts: NSP: Add new DT file for bcm958623hr") Acked-by: Jon Mason Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm958623hr.dts | 4 ---- arch/arm/boot/dts/bcm958625hr.dts | 4 ---- 2 files changed, 8 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts index 3bc5084..b8bde13 100644 --- a/arch/arm/boot/dts/bcm958623hr.dts +++ b/arch/arm/boot/dts/bcm958623hr.dts @@ -141,10 +141,6 @@ status = "okay"; }; -&sata { - status = "okay"; -}; - &qspi { bspi-sel = <0>; flash: m25p80@0 { diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index d94d14b..6a44b80 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -177,10 +177,6 @@ status = "okay"; }; -&sata { - status = "okay"; -}; - &srab { compatible = "brcm,bcm58625-srab", "brcm,nsp-srab"; status = "okay"; -- cgit v1.1 From 5f1aa51c7a1eef1c5a60b8334e32c89904964245 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 7 Nov 2017 11:10:29 -0800 Subject: ARM: dts: NSP: Fix PPI interrupt types Booting a kernel results in the kernel warning us about the following PPI interrupts configuration: [ 0.105127] smp: Bringing up secondary CPUs ... [ 0.110545] GIC: PPI11 is secure or misconfigured [ 0.110551] GIC: PPI13 is secure or misconfigured Fix this by using the appropriate edge configuration for PPI11 and PPI13, this is similar to what was fixed for Northstar (BCM5301X) in commit 0e34079cd1f6 ("ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags"). Fixes: 7b2e987de207 ("ARM: NSP: add minimal Northstar Plus device tree") Fixes: 1a9d53cabaf4 ("ARM: dts: NSP: Add TWD Support to DT") Acked-by: Jon Mason Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-nsp.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 528b9e3..dcc55aa 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -85,7 +85,7 @@ timer@20200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x20200 0x100>; - interrupts = ; + interrupts = ; clocks = <&periph_clk>; }; @@ -93,7 +93,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0x20600 0x20>; interrupts = ; + IRQ_TYPE_EDGE_RISING)>; clocks = <&periph_clk>; }; -- cgit v1.1 From d09220a887f70368afa79e850c95e74890c0a32d Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 27 Nov 2017 08:57:26 -0800 Subject: ARM: OMAP2+: Fix SRAM virt to phys translation for save_secure_ram_context With the CMA changes from Joonsoo Kim , it was noticed that n900 stopped booting. After investigating it turned out that n900 save_secure_ram_context does some whacky virtual to physical address translation for the SRAM data address. As we now only have minimal parts of omap3 idle code copied to SRAM, running save_secure_ram_context() in SRAM is not needed. It only gets called on PM init. And it seems there's no need to ever call this from SRAM idle code. So let's just keep save_secure_ram_context() in DDR, and pass it the physical address of the parameters. We can do everything else in omap-secure.c like we already do for other secure code. And since we don't have any documentation, I still have no clue what the values for 0, 1 and 1 for the parameters might be. If somebody has figured it out, please do send a patch to add some comments. Debugged-by: Joonsoo Kim Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap-secure.c | 19 +++++++++++++++++++ arch/arm/mach-omap2/omap-secure.h | 4 ++++ arch/arm/mach-omap2/pm.h | 4 ---- arch/arm/mach-omap2/pm34xx.c | 13 ++++--------- arch/arm/mach-omap2/sleep34xx.S | 26 ++++---------------------- 5 files changed, 31 insertions(+), 35 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c index 5ac122e..9ff9205 100644 --- a/arch/arm/mach-omap2/omap-secure.c +++ b/arch/arm/mach-omap2/omap-secure.c @@ -73,6 +73,25 @@ phys_addr_t omap_secure_ram_mempool_base(void) return omap_secure_memblock_base; } +u32 omap3_save_secure_ram(void __iomem *addr, int size) +{ + u32 ret; + u32 param[5]; + + if (size != OMAP3_SAVE_SECURE_RAM_SZ) + return OMAP3_SAVE_SECURE_RAM_SZ; + + param[0] = 4; /* Number of arguments */ + param[1] = __pa(addr); /* Physical address for saving */ + param[2] = 0; + param[3] = 1; + param[4] = 1; + + ret = save_secure_ram_context(__pa(param)); + + return ret; +} + /** * rx51_secure_dispatcher: Routine to dispatch secure PPA API calls * @idx: The PPA API index diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h index bae263f..c509cde 100644 --- a/arch/arm/mach-omap2/omap-secure.h +++ b/arch/arm/mach-omap2/omap-secure.h @@ -31,6 +31,8 @@ /* Maximum Secure memory storage size */ #define OMAP_SECURE_RAM_STORAGE (88 * SZ_1K) +#define OMAP3_SAVE_SECURE_RAM_SZ 0x803F + /* Secure low power HAL API index */ #define OMAP4_HAL_SAVESECURERAM_INDEX 0x1a #define OMAP4_HAL_SAVEHW_INDEX 0x1b @@ -65,6 +67,8 @@ extern u32 omap_smc2(u32 id, u32 falg, u32 pargs); extern u32 omap_smc3(u32 id, u32 process, u32 flag, u32 pargs); extern phys_addr_t omap_secure_ram_mempool_base(void); extern int omap_secure_ram_reserve_memblock(void); +extern u32 save_secure_ram_context(u32 args_pa); +extern u32 omap3_save_secure_ram(void __iomem *save_regs, int size); extern u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs, u32 arg1, u32 arg2, u32 arg3, u32 arg4); diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index b668719..8e30772 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -81,10 +81,6 @@ extern unsigned int omap3_do_wfi_sz; /* ... and its pointer from SRAM after copy */ extern void (*omap3_do_wfi_sram)(void); -/* save_secure_ram_context function pointer and size, for copy to SRAM */ -extern int save_secure_ram_context(u32 *addr); -extern unsigned int save_secure_ram_context_sz; - extern void omap3_save_scratchpad_contents(void); #define PM_RTA_ERRATUM_i608 (1 << 0) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 841ba19..36c5554 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -48,6 +48,7 @@ #include "prm3xxx.h" #include "pm.h" #include "sdrc.h" +#include "omap-secure.h" #include "sram.h" #include "control.h" #include "vc.h" @@ -66,7 +67,6 @@ struct power_state { static LIST_HEAD(pwrst_list); -static int (*_omap_save_secure_sram)(u32 *addr); void (*omap3_do_wfi_sram)(void); static struct powerdomain *mpu_pwrdm, *neon_pwrdm; @@ -121,8 +121,8 @@ static void omap3_save_secure_ram_context(void) * will hang the system. */ pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON); - ret = _omap_save_secure_sram((u32 *)(unsigned long) - __pa(omap3_secure_ram_storage)); + ret = omap3_save_secure_ram(omap3_secure_ram_storage, + OMAP3_SAVE_SECURE_RAM_SZ); pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state); /* Following is for error tracking, it should not happen */ if (ret) { @@ -434,15 +434,10 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) * * The minimum set of functions is pushed to SRAM for execution: * - omap3_do_wfi for erratum i581 WA, - * - save_secure_ram_context for security extensions. */ void omap_push_sram_idle(void) { omap3_do_wfi_sram = omap_sram_push(omap3_do_wfi, omap3_do_wfi_sz); - - if (omap_type() != OMAP2_DEVICE_TYPE_GP) - _omap_save_secure_sram = omap_sram_push(save_secure_ram_context, - save_secure_ram_context_sz); } static void __init pm_errata_configure(void) @@ -553,7 +548,7 @@ int __init omap3_pm_init(void) clkdm_add_wkdep(neon_clkdm, mpu_clkdm); if (omap_type() != OMAP2_DEVICE_TYPE_GP) { omap3_secure_ram_storage = - kmalloc(0x803F, GFP_KERNEL); + kmalloc(OMAP3_SAVE_SECURE_RAM_SZ, GFP_KERNEL); if (!omap3_secure_ram_storage) pr_err("Memory allocation failed when allocating for secure sram context\n"); diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index fa5fd24..22daf4e 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -93,20 +93,13 @@ ENTRY(enable_omap3630_toggle_l2_on_restore) ENDPROC(enable_omap3630_toggle_l2_on_restore) /* - * Function to call rom code to save secure ram context. This gets - * relocated to SRAM, so it can be all in .data section. Otherwise - * we need to initialize api_params separately. + * Function to call rom code to save secure ram context. + * + * r0 = physical address of the parameters */ - .data - .align 3 ENTRY(save_secure_ram_context) stmfd sp!, {r4 - r11, lr} @ save registers on stack - adr r3, api_params @ r3 points to parameters - str r0, [r3,#0x4] @ r0 has sdram address - ldr r12, high_mask - and r3, r3, r12 - ldr r12, sram_phy_addr_mask - orr r3, r3, r12 + mov r3, r0 @ physical address of parameters mov r0, #25 @ set service ID for PPA mov r12, r0 @ copy secure service ID in r12 mov r1, #0 @ set task id for ROM code in r1 @@ -120,18 +113,7 @@ ENTRY(save_secure_ram_context) nop nop ldmfd sp!, {r4 - r11, pc} - .align -sram_phy_addr_mask: - .word SRAM_BASE_P -high_mask: - .word 0xffff -api_params: - .word 0x4, 0x0, 0x0, 0x1, 0x1 ENDPROC(save_secure_ram_context) -ENTRY(save_secure_ram_context_sz) - .word . - save_secure_ram_context - - .text /* * ====================== -- cgit v1.1 From b6d6af7226465b6d11eac09d0be2ab78a4a9eb62 Mon Sep 17 00:00:00 2001 From: Keerthy Date: Fri, 10 Nov 2017 16:56:52 +0530 Subject: ARM: AM33xx: PRM: Remove am33xx_pwrdm_read_prev_pwrst function Referring TRM Am335X series: http://www.ti.com/lit/ug/spruh73p/spruh73p.pdf The LastPowerStateEntered bitfield is present only for PM_CEFUSE domain. This is not present in any of the other power domains. Hence remove the generic am33xx_pwrdm_read_prev_pwrst hook which wrongly reads the reserved bit fields for all the other power domains. Reading the reserved bits leads to wrongly interpreting the low power transitions for various power domains that do not have the LastPowerStateEntered field. The pm debug counters values are wrong currently as we are incrementing them based on the reserved bits. Signed-off-by: Keerthy Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/prm33xx.c | 12 ------------ 1 file changed, 12 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c index d2c5bca..ebaf80d 100644 --- a/arch/arm/mach-omap2/prm33xx.c +++ b/arch/arm/mach-omap2/prm33xx.c @@ -176,17 +176,6 @@ static int am33xx_pwrdm_read_pwrst(struct powerdomain *pwrdm) return v; } -static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm) -{ - u32 v; - - v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); - v &= AM33XX_LASTPOWERSTATEENTERED_MASK; - v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT; - - return v; -} - static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm) { am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK, @@ -357,7 +346,6 @@ struct pwrdm_ops am33xx_pwrdm_operations = { .pwrdm_set_next_pwrst = am33xx_pwrdm_set_next_pwrst, .pwrdm_read_next_pwrst = am33xx_pwrdm_read_next_pwrst, .pwrdm_read_pwrst = am33xx_pwrdm_read_pwrst, - .pwrdm_read_prev_pwrst = am33xx_pwrdm_read_prev_pwrst, .pwrdm_set_logic_retst = am33xx_pwrdm_set_logic_retst, .pwrdm_read_logic_pwrst = am33xx_pwrdm_read_logic_pwrst, .pwrdm_read_logic_retst = am33xx_pwrdm_read_logic_retst, -- cgit v1.1 From e9a9bb4e4779ca74cb52a6e2f8acbc0881d3bb18 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 14 Nov 2017 09:06:48 +0300 Subject: ARM: OMAP2+: Missing error code in omap_device_build() We need to set the error code if omap_device_alloc() fails. Signed-off-by: Dan Carpenter Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_device.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index d45cbfd..2e91eb8 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -516,8 +516,10 @@ struct platform_device __init *omap_device_build(const char *pdev_name, goto odbs_exit1; od = omap_device_alloc(pdev, &oh, 1); - if (IS_ERR(od)) + if (IS_ERR(od)) { + ret = PTR_ERR(od); goto odbs_exit1; + } ret = platform_device_add_data(pdev, pdata, pdata_len); if (ret) -- cgit v1.1 From cf87634c8b24e24bf379b8c6807c8b0fb5f23567 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 17 Nov 2017 08:56:58 -0800 Subject: ARM: dts: Fix omap4 hang with GPS connected to USB by using wakeupgen There's been a reproducable USB OHCI/EHCI cpuidle related hang on omap4 for a while that happens after about 20 - 40 minutes on an idle system with some data feeding device being connected, like a USB GPS device or a cellular modem. This issue happens in cpuidle states C2 and C3 and does not happen if cpuidle is limited to C1 state only. The symptoms are that the whole system hangs and never wakes up from idle, and if a watchdog is configured the system reboots after a while. Turns out that OHCI/EHCI devices on omap4 are trying to use the GIC interrupt controller directly as a parent instead of the WUGEN. We need to pass the interrupts through WUGEN to GIC to provide the wakeup events for the processor. Let's fix the issue by removing the gic interrupt-parent and use the default interrupt-parent wakeupgen instead. Note that omap5.dtsi had this already fixes earlier by commit 7136d457f365 ("ARM: omap: convert wakeupgen to stacked domains") but we somehow missed omap4 at that point. Fixes: 7136d457f365 ("ARM: omap: convert wakeupgen to stacked domains") Cc: Dave Gerlach Cc: Nishanth Menon Cc: Marc Zyngier Cc: Sebastian Reichel Reviewed-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4.dtsi | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 1dc5a76..d24291e 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -1081,14 +1081,12 @@ usbhsohci: ohci@4a064800 { compatible = "ti,ohci-omap3"; reg = <0x4a064800 0x400>; - interrupt-parent = <&gic>; interrupts = ; }; usbhsehci: ehci@4a064c00 { compatible = "ti,ehci-omap"; reg = <0x4a064c00 0x400>; - interrupt-parent = <&gic>; interrupts = ; }; }; -- cgit v1.1 From 3c18bbf3d11d2005da08b57ff26f44ff1c2b12d0 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Tue, 31 Oct 2017 13:42:13 -0500 Subject: ARM: dts: logicpd-som-lv: Fix gpmc addresses for NAND and enet This patch fixes and issue where the NAND and GPMC based ethernet controller stopped working. This also updates the GPMC settings to be consistent with the Logic PD Torpedo development from the commit listed above. Fixes: 44e4716499b8 ("ARM: dts: omap3: Fix NAND device nodes") Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts | 3 ++- arch/arm/boot/dts/logicpd-som-lv.dtsi | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts index 38faa90..2fa5eb4 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts @@ -72,7 +72,8 @@ }; &gpmc { - ranges = <1 0 0x08000000 0x1000000>; /* CS1: 16MB for LAN9221 */ + ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */ + 1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */ ethernet@gpmc { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index 26cce4d..c5edc7f 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -37,7 +37,7 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */ + ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { compatible = "ti,omap2-nand"; -- cgit v1.1 From cd7594ac3281722cb8f10d6f6c7e4287747c7a9d Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Tue, 31 Oct 2017 13:45:59 -0500 Subject: ARM: dts: logicpd-somlv: Fix wl127x pinmux The pin assignment for the wl127x interrupt was incorrect. I am not sure how this every worked. This also eliminates a conflict with the SMC911x ethernet driver and properly moves pinmuxes for the related gpio to omap3_pmx_wkup from omap3_pmx_core. Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV") Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/logicpd-som-lv.dtsi | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index c5edc7f..4f2c5ec 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -121,7 +121,7 @@ &mmc3 { interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>; - pinctrl-0 = <&mmc3_pins>; + pinctrl-0 = <&mmc3_pins &wl127x_gpio>; pinctrl-names = "default"; vmmc-supply = <&wl12xx_vmmc>; non-removable; @@ -132,8 +132,8 @@ wlcore: wlcore@2 { compatible = "ti,wl1273"; reg = <2>; - interrupt-parent = <&gpio5>; - interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */ + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; /* gpio 2 */ ref-clock-frequency = <26000000>; }; }; @@ -157,8 +157,6 @@ OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */ OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat2 */ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat3 */ - OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */ - OMAP3_CORE1_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */ OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs2.sdmmc_clk */ >; @@ -228,6 +226,12 @@ OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4) /* sys_boot2.gpio_4 */ >; }; + wl127x_gpio: pinmux_wl127x_gpio_pin { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a0c, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */ + OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ + >; + }; }; &omap3_pmx_core2 { -- cgit v1.1 From 627395a6f8091c0aa18f49dca7df59ba3ec147ef Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 1 Nov 2017 11:03:31 +0200 Subject: ARM: dts: am4372: Correct the interrupts_properties of McASP Fixes the following warnings: arch/arm/boot/dts/am437x-cm-t43.dtb: Warning (interrupts_property): interrupts size is (8), expected multiple of 12 in /ocp@44000000/mcasp@48038000 arch/arm/boot/dts/am437x-cm-t43.dtb: Warning (interrupts_property): interrupts size is (8), expected multiple of 12 in /ocp@44000000/mcasp@4803C000 Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am4372.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index e5b0614..4714a59 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -927,7 +927,8 @@ reg = <0x48038000 0x2000>, <0x46000000 0x400000>; reg-names = "mpu", "dat"; - interrupts = <80>, <81>; + interrupts = , + ; interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 8 2>, @@ -941,7 +942,8 @@ reg = <0x4803C000 0x2000>, <0x46400000 0x400000>; reg-names = "mpu", "dat"; - interrupts = <82>, <83>; + interrupts = , + ; interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 10 2>, -- cgit v1.1 From ca41e244517d6d3f1600c229ff7ca615049c1e9c Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 1 Nov 2017 11:03:40 +0200 Subject: ARM: dts: am437x-cm-t43: Correct the dmas property of spi0 The DMA binding for eDMA needs 2 parameters, not 1. The second, missing parameter is the tptc to be used for the channel. Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am437x-cm-t43.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts index 9e92d48..3b9a94c 100644 --- a/arch/arm/boot/dts/am437x-cm-t43.dts +++ b/arch/arm/boot/dts/am437x-cm-t43.dts @@ -301,8 +301,8 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; - dmas = <&edma 16 - &edma 17>; + dmas = <&edma 16 0 + &edma 17 0>; dma-names = "tx0", "rx0"; flash: w25q64cvzpig@0 { -- cgit v1.1 From f006ed726a5e1f8c94cf2ad7545eeb9a11f3c694 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sun, 5 Nov 2017 10:18:32 -0200 Subject: ARM: dts: vf610-zii-dev-rev-c: Fix the I2C EEPROM address at24mac602 should be at the I2C address 0x50, so that it matches the 'reg' property. Fixes: d4cd158176c3 ("ARM: dts: vf610-zii-dev: Add .dts file for rev. C") Signed-off-by: Fabio Estevam Reviewed-by: Andrew Lunn Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610-zii-dev-rev-c.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts index 02a6227..fbb3758 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts @@ -359,7 +359,7 @@ }; &i2c1 { - at24mac602@0 { + at24mac602@50 { compatible = "atmel,24c02"; reg = <0x50>; read-only; -- cgit v1.1 From e501506d3ea00eefa64463ebd9e5c13ee70990bd Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 15 Nov 2017 10:03:53 -0200 Subject: Revert "ARM: dts: imx53: add srtc node" This reverts commit 5b725054147deaf966b3919e10a86c6bfe946a18. The rtc block on i.MX53 is a completely different hardware than the one found on i.MX25. Cc: #4.14 Reported-by: Noel Vellemans Suggested-by: Juergen Borleis Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53.dtsi | 9 --------- 1 file changed, 9 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 589a67c..84f17f7 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -433,15 +433,6 @@ clock-names = "ipg", "per"; }; - srtc: srtc@53fa4000 { - compatible = "fsl,imx53-rtc", "fsl,imx25-rtc"; - reg = <0x53fa4000 0x4000>; - interrupts = <24>; - interrupt-parent = <&tzic>; - clocks = <&clks IMX5_CLK_SRTC_GATE>; - clock-names = "ipg"; - }; - iomuxc: iomuxc@53fa8000 { compatible = "fsl,imx53-iomuxc"; reg = <0x53fa8000 0x4000>; -- cgit v1.1 From 5553b142be11e794ebc0805950b2e8313f93d718 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Thu, 16 Nov 2017 17:58:21 +0000 Subject: arm: KVM: Fix VTTBR_BADDR_MASK BUG_ON off-by-one VTTBR_BADDR_MASK is used to sanity check the size and alignment of the VTTBR address. It seems to currently be off by one, thereby only allowing up to 39-bit addresses (instead of 40-bit) and also insufficiently checking the alignment. This patch fixes it. This patch is the 32bit pendent of Kristina's arm64 fix, and she deserves the actual kudos for pinpointing that one. Fixes: f7ed45be3ba52 ("KVM: ARM: World-switch implementation") Cc: # 3.9 Reported-by: Kristina Martsenko Reviewed-by: Christoffer Dall Signed-off-by: Marc Zyngier Signed-off-by: Christoffer Dall --- arch/arm/include/asm/kvm_arm.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/kvm_arm.h b/arch/arm/include/asm/kvm_arm.h index c878145..3ab8b37 100644 --- a/arch/arm/include/asm/kvm_arm.h +++ b/arch/arm/include/asm/kvm_arm.h @@ -161,8 +161,7 @@ #else #define VTTBR_X (5 - KVM_T0SZ) #endif -#define VTTBR_BADDR_SHIFT (VTTBR_X - 1) -#define VTTBR_BADDR_MASK (((_AC(1, ULL) << (40 - VTTBR_X)) - 1) << VTTBR_BADDR_SHIFT) +#define VTTBR_BADDR_MASK (((_AC(1, ULL) << (40 - VTTBR_X)) - 1) << VTTBR_X) #define VTTBR_VMID_SHIFT _AC(48, ULL) #define VTTBR_VMID_MASK(size) (_AT(u64, (1 << size) - 1) << VTTBR_VMID_SHIFT) -- cgit v1.1 From 696673d192f52c2c5a702224ee21f005318a844b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Alex=20Benn=C3=A9e?= Date: Thu, 16 Nov 2017 15:39:19 +0000 Subject: KVM: arm/arm64: debug: Introduce helper for single-step MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit After emulating instructions we may want return to user-space to handle single-step debugging. Introduce a helper function, which, if single-step is enabled, sets the run structure for return and returns true. Signed-off-by: Alex Bennée Reviewed-by: Julien Thierry Signed-off-by: Christoffer Dall --- arch/arm/include/asm/kvm_host.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index 242151e..a9f7d3f 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -285,6 +285,11 @@ static inline void kvm_arm_init_debug(void) {} static inline void kvm_arm_setup_debug(struct kvm_vcpu *vcpu) {} static inline void kvm_arm_clear_debug(struct kvm_vcpu *vcpu) {} static inline void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu) {} +static inline bool kvm_arm_handle_step_debug(struct kvm_vcpu *vcpu, + struct kvm_run *run) +{ + return false; +} int kvm_arm_vcpu_arch_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr); -- cgit v1.1 From 208e4ea61437930bbf8785c864ee7af1c693a561 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Mon, 30 Oct 2017 00:17:14 +0100 Subject: ARM: dts: meson: correct the sort order for the the gpio_intc node Nodes are sorted by their register start address. Move gpio_intc to the correct position. No functional changes intended. Fixes: 7d32bc03bcfb ("ARM: dts: meson8b: enable gpio interrupt controller") Signed-off-by: Martin Blumenstingl Acked-by: Jerome Brunet Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/meson.dtsi | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 4926133..b750c83 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -85,15 +85,6 @@ reg = <0x7c00 0x200>; }; - gpio_intc: interrupt-controller@9880 { - compatible = "amlogic,meson-gpio-intc"; - reg = <0xc1109880 0x10>; - interrupt-controller; - #interrupt-cells = <2>; - amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; - status = "disabled"; - }; - hwrng: rng@8100 { compatible = "amlogic,meson-rng"; reg = <0x8100 0x8>; @@ -191,6 +182,15 @@ status = "disabled"; }; + gpio_intc: interrupt-controller@9880 { + compatible = "amlogic,meson-gpio-intc"; + reg = <0xc1109880 0x10>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; + status = "disabled"; + }; + wdt: watchdog@9900 { compatible = "amlogic,meson6-wdt"; reg = <0x9900 0x8>; -- cgit v1.1 From 9fd7a2e063993a9d47f444147520b9e7fcea4c99 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Mon, 30 Oct 2017 00:17:15 +0100 Subject: ARM: dts: meson: fix the memory region of the GPIO interrupt controller commit 200a575b68d2 ("ARM: dts: meson: organize devices in their corresponding busses") organized all peripherals in busses so that the base register offset of the bus doesn't have to be included in all child-nodes anymore. The GPIO interrupt controller however specifies the register offset without subtracting the "cbus" base address. This leads to a problem where of_iomap inside the irq-meson-gpio driver fails because it actually tries to map 0x182209880 (cbus base = 0xc1100000 + 0xc1109880 for the GPIO interrupt controller). Fix this by using 0x9880 as register offset. Fixes: 7d32bc03bcfb ("ARM: dts: meson8b: enable gpio interrupt controller") Signed-off-by: Martin Blumenstingl Acked-by: Jerome Brunet Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/meson.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index b750c83..0d9faf1 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -184,7 +184,7 @@ gpio_intc: interrupt-controller@9880 { compatible = "amlogic,meson-gpio-intc"; - reg = <0xc1109880 0x10>; + reg = <0x9880 0x10>; interrupt-controller; #interrupt-cells = <2>; amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; -- cgit v1.1 From 0f0e290a662a89067f7c251d24ad6f63ceb1f2d6 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 2 Nov 2017 09:27:37 +0000 Subject: ARM: meson: fix spelling mistake: "Couln't" -> "Couldn't" Trivial fix to spelling mistake in pr_err error message Signed-off-by: Colin Ian King Acked-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm/mach-meson/platsmp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-meson/platsmp.c b/arch/arm/mach-meson/platsmp.c index 2555f90..cad7ee8 100644 --- a/arch/arm/mach-meson/platsmp.c +++ b/arch/arm/mach-meson/platsmp.c @@ -102,7 +102,7 @@ static void __init meson_smp_prepare_cpus(const char *scu_compatible, scu_base = of_iomap(node, 0); if (!scu_base) { - pr_err("Couln't map SCU registers\n"); + pr_err("Couldn't map SCU registers\n"); return; } -- cgit v1.1 From 44e5dced2ef6e7adb2bf53227f3e4283e4d8f8f1 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 9 Nov 2017 16:26:11 -0600 Subject: arm: dts: marvell: Add missing #phy-cells to usb-nop-xceiv "usb-nop-xceiv" is using the phy binding, but is missing #phy-cells property. This is probably because the binding was the precursor to the phy binding. Fixes the following warning in Marvell dts files: Warning (phys_property): Missing property '#phy-cells' in node ... Signed-off-by: Rob Herring Cc: Jason Cooper Cc: Sebastian Hesselbarth Reviewed-by: Andrew Lunn Acked-by: Gregory CLEMENT Signed-off-by: Olof Johansson --- arch/arm/boot/dts/armada-385-db-ap.dts | 1 + arch/arm/boot/dts/armada-385-linksys.dtsi | 1 + arch/arm/boot/dts/armada-385-synology-ds116.dts | 2 ++ arch/arm/boot/dts/armada-388-gp.dts | 2 ++ 4 files changed, 6 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts index 25d2d72..678aa02 100644 --- a/arch/arm/boot/dts/armada-385-db-ap.dts +++ b/arch/arm/boot/dts/armada-385-db-ap.dts @@ -236,6 +236,7 @@ usb3_phy: usb3_phy { compatible = "usb-nop-xceiv"; vcc-supply = <®_xhci0_vbus>; + #phy-cells = <0>; }; reg_xhci0_vbus: xhci0-vbus { diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index e1f355f..434dc9a 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -66,6 +66,7 @@ usb3_1_phy: usb3_1-phy { compatible = "usb-nop-xceiv"; vcc-supply = <&usb3_1_vbus>; + #phy-cells = <0>; }; usb3_1_vbus: usb3_1-vbus { diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts index 36ad571..0a3552e 100644 --- a/arch/arm/boot/dts/armada-385-synology-ds116.dts +++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts @@ -191,11 +191,13 @@ usb3_0_phy: usb3_0_phy { compatible = "usb-nop-xceiv"; vcc-supply = <®_usb3_0_vbus>; + #phy-cells = <0>; }; usb3_1_phy: usb3_1_phy { compatible = "usb-nop-xceiv"; vcc-supply = <®_usb3_1_vbus>; + #phy-cells = <0>; }; reg_usb3_0_vbus: usb3-vbus0 { diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts index f503955..51b4ee6 100644 --- a/arch/arm/boot/dts/armada-388-gp.dts +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -276,11 +276,13 @@ usb2_1_phy: usb2_1_phy { compatible = "usb-nop-xceiv"; vcc-supply = <®_usb2_1_vbus>; + #phy-cells = <0>; }; usb3_phy: usb3_phy { compatible = "usb-nop-xceiv"; vcc-supply = <®_usb3_vbus>; + #phy-cells = <0>; }; reg_usb3_vbus: usb3-vbus { -- cgit v1.1 From c895f6f703ad7dd2f99e751d9884b0aa5d0eea25 Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Mon, 4 Dec 2017 10:56:44 +0100 Subject: bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program type Commit 0515e5999a466dfe ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT program type") introduced the bpf_perf_event_data structure which exports the pt_regs structure. This is OK for multiple architectures but fail for s390 and arm64 which do not export pt_regs. Programs using them, for example, the bpf selftest fail to compile on these architectures. For s390, exporting the pt_regs is not an option because s390 wants to allow changes to it. For arm64, there is a user_pt_regs structure that covers parts of the pt_regs structure for use by user space. To solve the broken uapi for s390 and arm64, introduce an abstract type for pt_regs and add an asm/bpf_perf_event.h file that concretes the type. An asm-generic header file covers the architectures that export pt_regs today. The arch-specific enablement for s390 and arm64 follows in separate commits. Reported-by: Thomas Richter Fixes: 0515e5999a466dfe ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT program type") Signed-off-by: Hendrik Brueckner Reviewed-and-tested-by: Thomas Richter Acked-by: Alexei Starovoitov Cc: Arnaldo Carvalho de Melo Cc: Peter Zijlstra Cc: Ingo Molnar Cc: Alexander Shishkin Cc: Jiri Olsa Cc: Namhyung Kim Cc: Arnd Bergmann Cc: Daniel Borkmann Signed-off-by: Daniel Borkmann --- arch/arm/include/uapi/asm/Kbuild | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/include/uapi/asm/Kbuild b/arch/arm/include/uapi/asm/Kbuild index 4d53de3..4d1cc18 100644 --- a/arch/arm/include/uapi/asm/Kbuild +++ b/arch/arm/include/uapi/asm/Kbuild @@ -7,6 +7,7 @@ generated-y += unistd-oabi.h generated-y += unistd-eabi.h generic-y += bitsperlong.h +generic-y += bpf_perf_event.h generic-y += errno.h generic-y += ioctl.h generic-y += ipcbuf.h -- cgit v1.1 From d364b038bc962f494cffb8f6cb6cddbe41bcb5b6 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 4 Dec 2017 08:27:17 -0800 Subject: ARM: dts: Fix elm interrupt compiler warning Looks like the interrupt property is missing the controller and level information causing: Warning (interrupts_property): interrupts size is (4), expected multiple of 12 in /ocp/elm@48078000 Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 1dc5a76..22b377d 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -398,7 +398,7 @@ elm: elm@48078000 { compatible = "ti,am3352-elm"; reg = <0x48078000 0x2000>; - interrupts = <4>; + interrupts = ; ti,hwmods = "elm"; status = "disabled"; }; -- cgit v1.1 From c22fe696157dc94a25cc5396b43b29b6d6f4a189 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 4 Dec 2017 08:27:18 -0800 Subject: ARM: dts: Fix dm814x missing phy-cells property We have phy-cells for usb_phy0, but it's missing for usb_phy1 and we get: Warning (phys_property): Missing property '#phy-cells' in node /ocp/l4ls@48000000/control@140000/usb-phy@1b00 or bad phandle (referred from /ocp/usb@47400000/usb@47401800:phys[0]) Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dm814x.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index 9708157..46f3ee7 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -385,6 +385,7 @@ reg = <0x1b00 0x100>; reg-names = "phy"; ti,ctrl_mod = <&usb_ctrl_mod>; + #phy-cells = <0>; }; }; -- cgit v1.1 From c5bbf358b790c8a7850188dea34601db703a97fa Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 9 Nov 2017 16:26:12 -0600 Subject: arm: dts: nspire: Add missing #phy-cells to usb-nop-xceiv "usb-nop-xceiv" is using the phy binding, but is missing #phy-cells property. This is probably because the binding was the precursor to the phy binding. Fixes the following warning in nspire dts files: Warning (phys_property): Missing property '#phy-cells' in node ... Signed-off-by: Rob Herring Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/nspire.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi index ec2283b..1a5ae4c 100644 --- a/arch/arm/boot/dts/nspire.dtsi +++ b/arch/arm/boot/dts/nspire.dtsi @@ -56,6 +56,7 @@ usb_phy: usb_phy { compatible = "usb-nop-xceiv"; + #phy-cells = <0>; }; vbus_reg: vbus_reg { -- cgit v1.1 From 863204cfdae98626a92535ac928ad79f4d6b74ff Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 6 Dec 2017 14:17:17 +0100 Subject: ARM: omap2: hide omap3_save_secure_ram on non-OMAP3 builds In configurations without CONFIG_OMAP3 but with secure RAM support, we now run into a link failure: arch/arm/mach-omap2/omap-secure.o: In function `omap3_save_secure_ram': omap-secure.c:(.text+0x130): undefined reference to `save_secure_ram_context' The omap3_save_secure_ram() function is only called from the OMAP34xx power management code, so we can simply hide that function in the appropriate #ifdef. Fixes: d09220a887f7 ("ARM: OMAP2+: Fix SRAM virt to phys translation for save_secure_ram_context") Acked-by: Tony Lindgren Tested-by: Dan Murphy Signed-off-by: Arnd Bergmann --- arch/arm/mach-omap2/omap-secure.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c index 9ff9205..fa7f308 100644 --- a/arch/arm/mach-omap2/omap-secure.c +++ b/arch/arm/mach-omap2/omap-secure.c @@ -73,6 +73,7 @@ phys_addr_t omap_secure_ram_mempool_base(void) return omap_secure_memblock_base; } +#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) u32 omap3_save_secure_ram(void __iomem *addr, int size) { u32 ret; @@ -91,6 +92,7 @@ u32 omap3_save_secure_ram(void __iomem *addr, int size) return ret; } +#endif /** * rx51_secure_dispatcher: Routine to dispatch secure PPA API calls -- cgit v1.1 From cd8165c3d5fb07667328434835f2968a87caee67 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 12 Dec 2017 09:29:51 +0000 Subject: ARM: dts: vf610-zii-dev: use XAUI for DSA link ports Use XAUI rather than XGMII for DSA link ports, as this is the interface mode that the switches actually use. XAUI is the 4 lane bus with clock per direction, whereas XGMII is a 32 bit bus with clock. Signed-off-by: Russell King Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- arch/arm/boot/dts/vf610-zii-dev-rev-c.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts index 02a6227..15a685d 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts @@ -121,7 +121,7 @@ switch0port10: port@10 { reg = <10>; label = "dsa"; - phy-mode = "xgmii"; + phy-mode = "xaui"; link = <&switch1port10>; }; }; @@ -208,7 +208,7 @@ switch1port10: port@10 { reg = <10>; label = "dsa"; - phy-mode = "xgmii"; + phy-mode = "xaui"; link = <&switch0port10>; }; }; -- cgit v1.1 From 36b0cb84ee858f02c256d26f0cb4229c78e3399e Mon Sep 17 00:00:00 2001 From: Chunyan Zhang Date: Fri, 1 Dec 2017 03:51:04 +0100 Subject: ARM: 8731/1: Fix csum_partial_copy_from_user() stack mismatch An additional 'ip' will be pushed to the stack, for restoring the DACR later, if CONFIG_CPU_SW_DOMAIN_PAN defined. However, the fixup still get the err_ptr by add #8*4 to sp, which results in the fact that the code area pointed by the LR will be overwritten, or the kernel will crash if CONFIG_DEBUG_RODATA is enabled. This patch fixes the stack mismatch. Fixes: a5e090acbf54 ("ARM: software-based priviledged-no-access support") Signed-off-by: Lvqiang Huang Signed-off-by: Chunyan Zhang Signed-off-by: Russell King --- arch/arm/lib/csumpartialcopyuser.S | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S index 1712f13..b83fdc0 100644 --- a/arch/arm/lib/csumpartialcopyuser.S +++ b/arch/arm/lib/csumpartialcopyuser.S @@ -85,7 +85,11 @@ .pushsection .text.fixup,"ax" .align 4 9001: mov r4, #-EFAULT +#ifdef CONFIG_CPU_SW_DOMAIN_PAN + ldr r5, [sp, #9*4] @ *err_ptr +#else ldr r5, [sp, #8*4] @ *err_ptr +#endif str r4, [r5] ldmia sp, {r1, r2} @ retrieve dst, len add r2, r2, r1 -- cgit v1.1