From 7bcdca95c039d1cd1cfddd6aa012026b409ddb14 Mon Sep 17 00:00:00 2001
From: Alexander Clouter <alex@digriz.org.uk>
Date: Sun, 6 Mar 2011 10:04:31 +0000
Subject: ARM: orion5x: replace printk with pr_{err,info,...} in ts78xx-setup.c

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
---
 arch/arm/mach-orion5x/ts78xx-setup.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 8554707..edb1dd2 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -402,7 +402,7 @@ static void ts78xx_fpga_supports(void)
 		/* enable devices if magic matches */
 		switch ((ts78xx_fpga.id >> 8) & 0xffffff) {
 		case TS7800_FPGA_MAGIC:
-			printk(KERN_WARNING "TS-7800 FPGA: unrecognized revision 0x%.2x\n",
+			pr_warning("TS-7800 FPGA: unrecognized revision 0x%.2x\n",
 					ts78xx_fpga.id & 0xff);
 			ts78xx_fpga.supports.ts_rtc.present = 1;
 			ts78xx_fpga.supports.ts_nand.present = 1;
@@ -423,7 +423,7 @@ static int ts78xx_fpga_load_devices(void)
 	if (ts78xx_fpga.supports.ts_rtc.present == 1) {
 		tmp = ts78xx_ts_rtc_load();
 		if (tmp) {
-			printk(KERN_INFO "TS-78xx: RTC not registered\n");
+			pr_info("TS-78xx: RTC not registered\n");
 			ts78xx_fpga.supports.ts_rtc.present = 0;
 		}
 		ret |= tmp;
@@ -431,7 +431,7 @@ static int ts78xx_fpga_load_devices(void)
 	if (ts78xx_fpga.supports.ts_nand.present == 1) {
 		tmp = ts78xx_ts_nand_load();
 		if (tmp) {
-			printk(KERN_INFO "TS-78xx: NAND not registered\n");
+			pr_info("TS-78xx: NAND not registered\n");
 			ts78xx_fpga.supports.ts_nand.present = 0;
 		}
 		ret |= tmp;
@@ -439,7 +439,7 @@ static int ts78xx_fpga_load_devices(void)
 	if (ts78xx_fpga.supports.ts_rng.present == 1) {
 		tmp = ts78xx_ts_rng_load();
 		if (tmp) {
-			printk(KERN_INFO "TS-78xx: RNG not registered\n");
+			pr_info("TS-78xx: RNG not registered\n");
 			ts78xx_fpga.supports.ts_rng.present = 0;
 		}
 		ret |= tmp;
@@ -466,7 +466,7 @@ static int ts78xx_fpga_load(void)
 {
 	ts78xx_fpga.id = readl(TS78XX_FPGA_REGS_VIRT_BASE);
 
-	printk(KERN_INFO "TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n",
+	pr_info("TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n",
 			(ts78xx_fpga.id >> 8) & 0xffffff,
 			ts78xx_fpga.id & 0xff);
 
@@ -494,7 +494,7 @@ static int ts78xx_fpga_unload(void)
 	 * UrJTAG SVN since r1381 can be used to reprogram the FPGA
 	 */
 	if (ts78xx_fpga.id != fpga_id) {
-		printk(KERN_ERR	"TS-78xx FPGA: magic/rev mismatch\n"
+		pr_err("TS-78xx FPGA: magic/rev mismatch\n"
 			"TS-78xx FPGA: was 0x%.6x/%.2x but now 0x%.6x/%.2x\n",
 			(ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff,
 			(fpga_id >> 8) & 0xffffff, fpga_id & 0xff);
@@ -525,7 +525,7 @@ static ssize_t ts78xx_fpga_store(struct kobject *kobj,
 	int value, ret;
 
 	if (ts78xx_fpga.state < 0) {
-		printk(KERN_ERR "TS-78xx FPGA: borked, you must powercycle asap\n");
+		pr_err("TS-78xx FPGA: borked, you must powercycle asap\n");
 		return -EBUSY;
 	}
 
@@ -534,7 +534,7 @@ static ssize_t ts78xx_fpga_store(struct kobject *kobj,
 	else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0)
 		value = 0;
 	else {
-		printk(KERN_ERR "ts78xx_fpga_store: Invalid value\n");
+		pr_err("ts78xx_fpga_store: Invalid value\n");
 		return -EINVAL;
 	}
 
@@ -616,7 +616,7 @@ static void __init ts78xx_init(void)
 	ret = ts78xx_fpga_load();
 	ret = sysfs_create_file(power_kobj, &ts78xx_fpga_attr.attr);
 	if (ret)
-		printk(KERN_ERR "sysfs_create_file failed: %d\n", ret);
+		pr_err("sysfs_create_file failed: %d\n", ret);
 }
 
 MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
-- 
cgit v1.1


From 7428fff20494935b4ce767d7c80de077e8d1d745 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Sat, 15 Jan 2011 17:55:45 +0100
Subject: ARM: pxa: PalmTE2: Use gpio arrays in backlight init

Use gpio_request_array() / gpio_free_array() in backlight init and exit
functions. This makes the code cleaner and less error prone.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
 arch/arm/mach-pxa/palmte2.c | 31 +++++++------------------------
 1 file changed, 7 insertions(+), 24 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 3f25014..66311c7 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -136,30 +136,14 @@ static struct platform_device palmte2_pxa_keys = {
 /******************************************************************************
  * Backlight
  ******************************************************************************/
+static struct gpio palmte_bl_gpios[] = {
+	{ GPIO_NR_PALMTE2_BL_POWER, GPIOF_INIT_LOW, "Backlight power" },
+	{ GPIO_NR_PALMTE2_LCD_POWER, GPIOF_INIT_LOW, "LCD power" },
+};
+
 static int palmte2_backlight_init(struct device *dev)
 {
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMTE2_BL_POWER, "BL POWER");
-	if (ret)
-		goto err;
-	ret = gpio_direction_output(GPIO_NR_PALMTE2_BL_POWER, 0);
-	if (ret)
-		goto err2;
-	ret = gpio_request(GPIO_NR_PALMTE2_LCD_POWER, "LCD POWER");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_output(GPIO_NR_PALMTE2_LCD_POWER, 0);
-	if (ret)
-		goto err3;
-
-	return 0;
-err3:
-	gpio_free(GPIO_NR_PALMTE2_LCD_POWER);
-err2:
-	gpio_free(GPIO_NR_PALMTE2_BL_POWER);
-err:
-	return ret;
+	return gpio_request_array(ARRAY_AND_SIZE(palmte_bl_gpios));
 }
 
 static int palmte2_backlight_notify(struct device *dev, int brightness)
@@ -171,8 +155,7 @@ static int palmte2_backlight_notify(struct device *dev, int brightness)
 
 static void palmte2_backlight_exit(struct device *dev)
 {
-	gpio_free(GPIO_NR_PALMTE2_BL_POWER);
-	gpio_free(GPIO_NR_PALMTE2_LCD_POWER);
+	gpio_free_array(ARRAY_AND_SIZE(palmte_bl_gpios));
 }
 
 static struct platform_pwm_backlight_data palmte2_backlight_data = {
-- 
cgit v1.1


From 9ed3fbf1cbc2b747b3532985059f4738c15f4c07 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Sat, 15 Jan 2011 19:22:19 +0100
Subject: ARM: pxa: Update copyright notices for Palm devices

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
 arch/arm/mach-pxa/palm27x.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index 35572c4..4c9a938 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -1,8 +1,7 @@
 /*
  * Common code for Palm LD, T5, TX, Z72
  *
- * Copyright (C) 2010
- * Marek Vasut <marek.vasut@gmail.com>
+ * Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
-- 
cgit v1.1


From 54a93b69a4341a14acb67e0bb19b9bf1cc878cb2 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Thu, 13 Jan 2011 11:45:30 +0100
Subject: ARM: pxa: PalmZ72: Add OV9640 camera support

Rework of patch from 2009:
PalmZ72: Add support for OV9640 camera sensor

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
 arch/arm/mach-pxa/include/mach/palmz72.h |   5 ++
 arch/arm/mach-pxa/palmz72.c              | 127 +++++++++++++++++++++++++++++++
 2 files changed, 132 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h
index 2bbcf70..0d4700a 100644
--- a/arch/arm/mach-pxa/include/mach/palmz72.h
+++ b/arch/arm/mach-pxa/include/mach/palmz72.h
@@ -44,6 +44,11 @@
 #define GPIO_NR_PALMZ72_BT_POWER		17
 #define GPIO_NR_PALMZ72_BT_RESET		83
 
+/* Camera */
+#define GPIO_NR_PALMZ72_CAM_PWDN		56
+#define GPIO_NR_PALMZ72_CAM_RESET		57
+#define GPIO_NR_PALMZ72_CAM_POWER		91
+
 /** Initial values **/
 
 /* Battery */
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 7bf4017..27a8e6d 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -30,6 +30,7 @@
 #include <linux/wm97xx.h>
 #include <linux/power_supply.h>
 #include <linux/usb/gpio_vbus.h>
+#include <linux/i2c-gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -47,6 +48,9 @@
 #include <mach/palm27x.h>
 
 #include <mach/pm.h>
+#include <mach/camera.h>
+
+#include <media/soc_camera.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -103,6 +107,28 @@ static unsigned long palmz72_pin_config[] __initdata = {
 	GPIO22_GPIO,	/* LCD border color */
 	GPIO96_GPIO,	/* lcd power */
 
+	/* PXA Camera */
+	GPIO81_CIF_DD_0,
+	GPIO48_CIF_DD_5,
+	GPIO50_CIF_DD_3,
+	GPIO51_CIF_DD_2,
+	GPIO52_CIF_DD_4,
+	GPIO53_CIF_MCLK,
+	GPIO54_CIF_PCLK,
+	GPIO55_CIF_DD_1,
+	GPIO84_CIF_FV,
+	GPIO85_CIF_LV,
+	GPIO93_CIF_DD_6,
+	GPIO108_CIF_DD_7,
+
+	GPIO56_GPIO,	/* OV9640 Powerdown */
+	GPIO57_GPIO,	/* OV9640 Reset */
+	GPIO91_GPIO,	/* OV9640 Power */
+
+	/* I2C */
+	GPIO117_GPIO,	/* I2C_SCL */
+	GPIO118_GPIO,	/* I2C_SDA */
+
 	/* Misc. */
 	GPIO0_GPIO	| WAKEUP_ON_LEVEL_HIGH,	/* power detect */
 	GPIO88_GPIO,				/* green led */
@@ -254,6 +280,106 @@ device_initcall(palmz72_pm_init);
 #endif
 
 /******************************************************************************
+ * SoC Camera
+ ******************************************************************************/
+#if defined(CONFIG_SOC_CAMERA_OV9640) || \
+	defined(CONFIG_SOC_CAMERA_OV9640_MODULE)
+static struct pxacamera_platform_data palmz72_pxacamera_platform_data = {
+	.flags		= PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+			PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+	.mclk_10khz	= 2600,
+};
+
+/* Board I2C devices. */
+static struct i2c_board_info palmz72_i2c_device[] = {
+	{
+		I2C_BOARD_INFO("ov9640", 0x30),
+	}
+};
+
+static int palmz72_camera_power(struct device *dev, int power)
+{
+	gpio_set_value(GPIO_NR_PALMZ72_CAM_PWDN, !power);
+	mdelay(50);
+	return 0;
+}
+
+static int palmz72_camera_reset(struct device *dev)
+{
+	gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 1);
+	mdelay(50);
+	gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 0);
+	mdelay(50);
+	return 0;
+}
+
+static struct soc_camera_link palmz72_iclink = {
+	.bus_id		= 0, /* Match id in pxa27x_device_camera in device.c */
+	.board_info	= &palmz72_i2c_device[0],
+	.i2c_adapter_id	= 0,
+	.module_name	= "ov96xx",
+	.power		= &palmz72_camera_power,
+	.reset		= &palmz72_camera_reset,
+	.flags		= SOCAM_DATAWIDTH_8,
+};
+
+static struct i2c_gpio_platform_data palmz72_i2c_bus_data = {
+	.sda_pin	= 118,
+	.scl_pin	= 117,
+	.udelay		= 10,
+	.timeout	= 100,
+};
+
+static struct platform_device palmz72_i2c_bus_device = {
+	.name		= "i2c-gpio",
+	.id		= 0, /* we use this as a replacement for i2c-pxa */
+	.dev		= {
+		.platform_data	= &palmz72_i2c_bus_data,
+	}
+};
+
+static struct platform_device palmz72_camera = {
+	.name	= "soc-camera-pdrv",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &palmz72_iclink,
+	},
+};
+
+/* Here we request the camera GPIOs and configure them. We power up the camera
+ * module, deassert the reset pin, but put it into powerdown (low to no power
+ * consumption) mode. This allows us to later bring the module up fast. */
+static struct gpio palmz72_camera_gpios[] = {
+	{ GPIO_NR_PALMZ72_CAM_POWER,	GPIOF_INIT_HIGH,"Camera DVDD" },
+	{ GPIO_NR_PALMZ72_CAM_RESET,	GPIOF_INIT_LOW,	"Camera RESET" },
+	{ GPIO_NR_PALMZ72_CAM_PWDN,	GPIOF_INIT_LOW,	"Camera PWDN" },
+};
+
+static inline void __init palmz72_cam_gpio_init(void)
+{
+	int ret;
+
+	ret = gpio_request_array(ARRAY_AND_SIZE(palmz72_camera_gpios));
+	if (!ret)
+		gpio_free_array(ARRAY_AND_SIZE(palmz72_camera_gpios));
+	else
+		printk(KERN_ERR "Camera GPIO init failed!\n");
+
+	return;
+}
+
+static void __init palmz72_camera_init(void)
+{
+	palmz72_cam_gpio_init();
+	pxa_set_camera_info(&palmz72_pxacamera_platform_data);
+	platform_device_register(&palmz72_i2c_bus_device);
+	platform_device_register(&palmz72_camera);
+}
+#else
+static inline void palmz72_camera_init(void) {}
+#endif
+
+/******************************************************************************
  * Machine init
  ******************************************************************************/
 static void __init palmz72_init(void)
@@ -276,6 +402,7 @@ static void __init palmz72_init(void)
 	palm27x_pmic_init();
 	palmz72_kpc_init();
 	palmz72_leds_init();
+	palmz72_camera_init();
 }
 
 MACHINE_START(PALMZ72, "Palm Zire72")
-- 
cgit v1.1


From 4321e1a12b811c02441240aa6183156791204f3f Mon Sep 17 00:00:00 2001
From: Russell King - ARM Linux <linux@arm.linux.org.uk>
Date: Tue, 15 Feb 2011 15:37:30 +0800
Subject: ARM: pxa: clean up set_pxa_fb_info

set_pxa_fb_info() has been a long-standing wart in the naming scheme
of the pxa_set_xxx_info() functions.  This renames the function, and
combines set_pxa_fb_parent() with set_pxa_fb_info().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/am200epd.c              |  4 ++--
 arch/arm/mach-pxa/balloon3.c              |  2 +-
 arch/arm/mach-pxa/cm-x2xx.c               |  2 +-
 arch/arm/mach-pxa/cm-x300.c               |  2 +-
 arch/arm/mach-pxa/colibri-pxa270-income.c |  2 +-
 arch/arm/mach-pxa/colibri-pxa3xx.c        |  2 +-
 arch/arm/mach-pxa/devices.c               |  8 ++------
 arch/arm/mach-pxa/em-x270.c               |  2 +-
 arch/arm/mach-pxa/eseries.c               |  2 +-
 arch/arm/mach-pxa/ezx.c                   | 12 ++++++------
 arch/arm/mach-pxa/idp.c                   |  2 +-
 arch/arm/mach-pxa/include/mach/pxafb.h    |  4 ++--
 arch/arm/mach-pxa/littleton.c             |  2 +-
 arch/arm/mach-pxa/lpd270.c                |  2 +-
 arch/arm/mach-pxa/lubbock.c               |  2 +-
 arch/arm/mach-pxa/magician.c              |  2 +-
 arch/arm/mach-pxa/mainstone.c             |  2 +-
 arch/arm/mach-pxa/mioa701.c               |  2 +-
 arch/arm/mach-pxa/palm27x.c               |  2 +-
 arch/arm/mach-pxa/palmtc.c                |  2 +-
 arch/arm/mach-pxa/palmte2.c               |  2 +-
 arch/arm/mach-pxa/pcm990-baseboard.c      |  2 +-
 arch/arm/mach-pxa/poodle.c                |  3 +--
 arch/arm/mach-pxa/raumfeld.c              |  2 +-
 arch/arm/mach-pxa/saar.c                  |  2 +-
 arch/arm/mach-pxa/spitz.c                 |  2 +-
 arch/arm/mach-pxa/tavorevb.c              |  2 +-
 arch/arm/mach-pxa/trizeps4.c              |  4 ++--
 arch/arm/mach-pxa/viper.c                 |  2 +-
 arch/arm/mach-pxa/vpac270.c               |  2 +-
 arch/arm/mach-pxa/z2.c                    |  2 +-
 arch/arm/mach-pxa/zeus.c                  |  2 +-
 arch/arm/mach-pxa/zylonite.c              |  4 ++--
 33 files changed, 43 insertions(+), 48 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
index 3499fada..10964e3 100644
--- a/arch/arm/mach-pxa/am200epd.c
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -194,7 +194,7 @@ static struct notifier_block am200_fb_notif = {
 };
 
 /* this gets called as part of our init. these steps must be done now so
- * that we can use set_pxa_fb_info */
+ * that we can use pxa_set_fb_info */
 static void __init am200_presetup_fb(void)
 {
 	int fw;
@@ -249,7 +249,7 @@ static void __init am200_presetup_fb(void)
 	/* we divide since we told the LCD controller we're 16bpp */
 	am200_fb_info.modes->xres /= 2;
 
-	set_pxa_fb_info(&am200_fb_info);
+	pxa_set_fb_info(NULL, &am200_fb_info);
 
 }
 
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index a134a14..1539577 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -264,7 +264,7 @@ static void __init balloon3_lcd_init(void)
 	}
 
 	balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power;
-	set_pxa_fb_info(&balloon3_lcd_screen);
+	pxa_set_fb_info(NULL, &balloon3_lcd_screen);
 	return;
 
 err2:
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index b734d84..8225e2e 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -379,7 +379,7 @@ __setup("monitor=", cmx2xx_set_display);
 
 static void __init cmx2xx_init_display(void)
 {
-	set_pxa_fb_info(cmx2xx_display);
+	pxa_set_fb_info(NULL, cmx2xx_display);
 }
 #else
 static inline void cmx2xx_init_display(void) {}
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 7984268..0c9cfbc 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -296,7 +296,7 @@ static struct pxafb_mach_info cm_x300_lcd = {
 
 static void __init cm_x300_init_lcd(void)
 {
-	set_pxa_fb_info(&cm_x300_lcd);
+	pxa_set_fb_info(NULL, &cm_x300_lcd);
 }
 #else
 static inline void cm_x300_init_lcd(void) {}
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
index 07b62a0..c2f164b 100644
--- a/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -176,7 +176,7 @@ static struct pxafb_mach_info income_lcd_screen = {
 
 static void __init income_lcd_init(void)
 {
-	set_pxa_fb_info(&income_lcd_screen);
+	pxa_set_fb_info(NULL, &income_lcd_screen);
 }
 #else
 static inline void income_lcd_init(void) {}
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index 96b2d9f..3f9be41 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -105,7 +105,7 @@ void __init colibri_pxa3xx_init_lcd(int bl_pin)
 	lcd_bl_pin = bl_pin;
 	gpio_request(bl_pin, "lcd backlight");
 	gpio_direction_output(bl_pin, 0);
-	set_pxa_fb_info(&sharp_lq43_info);
+	pxa_set_fb_info(NULL, &sharp_lq43_info);
 }
 #endif
 
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 4c766e3..edfe803 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -188,16 +188,12 @@ struct platform_device pxa_device_fb = {
 	.resource	= pxafb_resources,
 };
 
-void __init set_pxa_fb_info(struct pxafb_mach_info *info)
+void __init pxa_set_fb_info(struct device *parent, struct pxafb_mach_info *info)
 {
+	pxa_device_fb.dev.parent = parent;
 	pxa_register_device(&pxa_device_fb, info);
 }
 
-void __init set_pxa_fb_parent(struct device *parent_dev)
-{
-	pxa_device_fb.dev.parent = parent_dev;
-}
-
 static struct resource pxa_resource_ffuart[] = {
 	{
 		.start	= 0x40100000,
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index a78bb30..2da03a4 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -689,7 +689,7 @@ static struct pxafb_mach_info em_x270_lcd = {
 
 static void __init em_x270_init_lcd(void)
 {
-	set_pxa_fb_info(&em_x270_lcd);
+	pxa_set_fb_info(NULL, &em_x270_lcd);
 }
 #else
 static inline void em_x270_init_lcd(void) {}
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index edca0a0..8fdf5a3 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -344,7 +344,7 @@ static void __init e400_init(void)
 	/* Fixme - e400 may have a switched clock */
 	eseries_register_clks();
 	eseries_get_tmio_gpios();
-	set_pxa_fb_info(&e400_pxafb_mach_info);
+	pxa_set_fb_info(NULL, &e400_pxafb_mach_info);
 	platform_add_devices(ARRAY_AND_SIZE(e400_devices));
 	pxa_set_udc_info(&e7xx_udc_mach_info);
 }
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 87cec0a..fcd366a 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -783,7 +783,7 @@ static void __init a780_init(void)
 
 	pxa_set_i2c_info(NULL);
 
-	set_pxa_fb_info(&ezx_fb_info_1);
+	pxa_set_fb_info(NULL, &ezx_fb_info_1);
 
 	pxa_set_keypad_info(&a780_keypad_platform_data);
 
@@ -853,7 +853,7 @@ static void __init e680_init(void)
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info));
 
-	set_pxa_fb_info(&ezx_fb_info_1);
+	pxa_set_fb_info(NULL, &ezx_fb_info_1);
 
 	pxa_set_keypad_info(&e680_keypad_platform_data);
 
@@ -918,7 +918,7 @@ static void __init a1200_init(void)
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info));
 
-	set_pxa_fb_info(&ezx_fb_info_2);
+	pxa_set_fb_info(NULL, &ezx_fb_info_2);
 
 	pxa_set_keypad_info(&a1200_keypad_platform_data);
 
@@ -1103,7 +1103,7 @@ static void __init a910_init(void)
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info));
 
-	set_pxa_fb_info(&ezx_fb_info_2);
+	pxa_set_fb_info(NULL, &ezx_fb_info_2);
 
 	pxa_set_keypad_info(&a910_keypad_platform_data);
 
@@ -1173,7 +1173,7 @@ static void __init e6_init(void)
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info));
 
-	set_pxa_fb_info(&ezx_fb_info_2);
+	pxa_set_fb_info(NULL, &ezx_fb_info_2);
 
 	pxa_set_keypad_info(&e6_keypad_platform_data);
 
@@ -1212,7 +1212,7 @@ static void __init e2_init(void)
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info));
 
-	set_pxa_fb_info(&ezx_fb_info_2);
+	pxa_set_fb_info(NULL, &ezx_fb_info_2);
 
 	pxa_set_keypad_info(&e2_keypad_platform_data);
 
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index dd40e4a..f7fb64f 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -167,7 +167,7 @@ static void __init idp_init(void)
 
 	platform_device_register(&smc91x_device);
 	//platform_device_register(&mst_audio_device);
-	set_pxa_fb_info(&sharp_lm8v31);
+	pxa_set_fb_info(NULL, &sharp_lm8v31);
 	pxa_set_mci_info(&idp_mci_platform_data);
 }
 
diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
index 160ec83..01a45ac4 100644
--- a/arch/arm/mach-pxa/include/mach/pxafb.h
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -154,8 +154,8 @@ struct pxafb_mach_info {
 	void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
 	void (*smart_update)(struct fb_info *);
 };
-void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info);
-void set_pxa_fb_parent(struct device *parent_dev);
+
+void pxa_set_fb_info(struct device *, struct pxafb_mach_info *);
 unsigned long pxafb_get_hsync_time(struct device *dev);
 
 extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index ccb7bfa..4b2c45f 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -185,7 +185,7 @@ static struct pxafb_mach_info littleton_lcd_info = {
 
 static void littleton_init_lcd(void)
 {
-	set_pxa_fb_info(&littleton_lcd_info);
+	pxa_set_fb_info(NULL, &littleton_lcd_info);
 }
 #else
 static inline void littleton_init_lcd(void) {};
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index c9a3e77..8aebc58 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -480,7 +480,7 @@ static void __init lpd270_init(void)
 	pxa_set_ac97_info(NULL);
 
 	if (lpd270_lcd_to_use != NULL)
-		set_pxa_fb_info(lpd270_lcd_to_use);
+		pxa_set_fb_info(NULL, lpd270_lcd_to_use);
 
 	pxa_set_ohci_info(&lpd270_ohci_platform_data);
 }
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index dca20de..12a2a56 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -521,7 +521,7 @@ static void __init lubbock_init(void)
 
 	clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
 	pxa_set_udc_info(&udc_info);
-	set_pxa_fb_info(&sharp_lm8v31);
+	pxa_set_fb_info(NULL, &sharp_lm8v31);
 	pxa_set_mci_info(&lubbock_mci_platform_data);
 	pxa_set_ficp_info(&lubbock_ficp_platform_data);
 	pxa_set_ac97_info(NULL);
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 41198f0..ad70264 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -757,7 +757,7 @@ static void __init magician_init(void)
 		gpio_direction_output(GPIO104_MAGICIAN_LCD_POWER_1, 0);
 		gpio_direction_output(GPIO105_MAGICIAN_LCD_POWER_2, 0);
 		gpio_direction_output(GPIO106_MAGICIAN_LCD_POWER_3, 0);
-		set_pxa_fb_info(lcd_select ? &samsung_info : &toppoly_info);
+		pxa_set_fb_info(NULL, lcd_select ? &samsung_info : &toppoly_info);
 	} else
 		pr_err("LCD detection: CPLD mapping failed\n");
 }
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index d4b6f23..a58f522 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -592,7 +592,7 @@ static void __init mainstone_init(void)
 	else
 		mainstone_pxafb_info.modes = &toshiba_ltm035a776c_mode;
 
-	set_pxa_fb_info(&mainstone_pxafb_info);
+	pxa_set_fb_info(NULL, &mainstone_pxafb_info);
 	mainstone_backlight_register();
 
 	pxa_set_mci_info(&mainstone_mci_platform_data);
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index faafea3..18e05b1 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -795,7 +795,7 @@ static void __init mioa701_machine_init(void)
 	pxa_set_stuart_info(NULL);
 	mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
 	bootstrap_init();
-	set_pxa_fb_info(&mioa701_pxafb_info);
+	pxa_set_fb_info(NULL, &mioa701_pxafb_info);
 	pxa_set_mci_info(&mioa701_mci_info);
 	pxa_set_keypad_info(&mioa701_keypad_info);
 	pxa_set_udc_info(&mioa701_udc_info);
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index 4c9a938..5c93728 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -158,7 +158,7 @@ void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode)
 		palm27x_lcd_screen.pxafb_lcd_power = palm27x_lcd_ctl;
 	}
 
-	set_pxa_fb_info(&palm27x_lcd_screen);
+	pxa_set_fb_info(NULL, &palm27x_lcd_screen);
 }
 #endif
 
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index a09a237..fb06bd0 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -507,7 +507,7 @@ static struct pxafb_mach_info palmtc_lcd_screen = {
 
 static void __init palmtc_lcd_init(void)
 {
-	set_pxa_fb_info(&palmtc_lcd_screen);
+	pxa_set_fb_info(NULL, &palmtc_lcd_screen);
 }
 #else
 static inline void palmtc_lcd_init(void) {}
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 66311c7..726f5b9 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -346,7 +346,7 @@ static void __init palmte2_init(void)
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	set_pxa_fb_info(&palmte2_lcd_screen);
+	pxa_set_fb_info(NULL, &palmte2_lcd_screen);
 	pxa_set_mci_info(&palmte2_mci_platform_data);
 	palmte2_udc_init();
 	pxa_set_ac97_info(&palmte2_ac97_pdata);
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 90820fa..c1a64489 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -515,7 +515,7 @@ void __init pcm990_baseboard_init(void)
 	pcm990_init_irq();
 
 #ifndef CONFIG_PCM990_DISPLAY_NONE
-	set_pxa_fb_info(&pcm990_fbinfo);
+	pxa_set_fb_info(NULL, &pcm990_fbinfo);
 #endif
 	platform_device_register(&pcm990_backlight_device);
 
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 4f0ff1a..be68ec5 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -445,8 +445,7 @@ static void __init poodle_init(void)
 	if (ret)
 		pr_warning("poodle: Unable to register LoCoMo device\n");
 
-	set_pxa_fb_parent(&poodle_locomo_device.dev);
-	set_pxa_fb_info(&poodle_fb_info);
+	pxa_set_fb_info(&poodle_locomo_device.dev, &poodle_fb_info);
 	pxa_set_udc_info(&udc_info);
 	pxa_set_mci_info(&poodle_mci_platform_data);
 	pxa_set_ficp_info(&poodle_ficp_platform_data);
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 8361151..d9a5791 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -597,7 +597,7 @@ static void __init raumfeld_lcd_init(void)
 {
 	int ret;
 
-	set_pxa_fb_info(&raumfeld_sharp_lcd_info);
+	pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info);
 
 	/* Earlier devices had the backlight regulator controlled
 	 * via PWM, later versions use another controller for that */
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index c1ca8cb..dd0118f 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -473,7 +473,7 @@ static struct pxafb_mach_info saar_lcd_info = {
 
 static void __init saar_init_lcd(void)
 {
-	set_pxa_fb_info(&saar_lcd_info);
+	pxa_set_fb_info(NULL, &saar_lcd_info);
 }
 #else
 static inline void saar_init_lcd(void) {}
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index b49a2c2..e646b6d 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -725,7 +725,7 @@ static struct pxafb_mach_info spitz_pxafb_info = {
 
 static void __init spitz_lcd_init(void)
 {
-	set_pxa_fb_info(&spitz_pxafb_info);
+	pxa_set_fb_info(NULL, &spitz_pxafb_info);
 }
 #else
 static inline void spitz_lcd_init(void) {}
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 9cecf83..53d4a47 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -466,7 +466,7 @@ static void __init tavorevb_init_lcd(void)
 {
 	platform_device_register(&tavorevb_backlight_devices[0]);
 	platform_device_register(&tavorevb_backlight_devices[1]);
-	set_pxa_fb_info(&tavorevb_lcd_info);
+	pxa_set_fb_info(NULL, &tavorevb_lcd_info);
 }
 #else
 static inline void tavorevb_init_lcd(void) {}
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 423261d..fa510fd 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -516,9 +516,9 @@ static void __init trizeps4_init(void)
 	pxa_set_stuart_info(NULL);
 
 	if (0)	/* dont know how to determine LCD */
-		set_pxa_fb_info(&sharp_lcd);
+		pxa_set_fb_info(NULL, &sharp_lcd);
 	else
-		set_pxa_fb_info(&toshiba_lcd);
+		pxa_set_fb_info(NULL, &toshiba_lcd);
 
 	pxa_set_mci_info(&trizeps4_mci_platform_data);
 #ifndef STATUS_LEDS_ON_STUART_PINS
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 49eeeab..53b2495 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -932,7 +932,7 @@ static void __init viper_init(void)
 	/* Wake-up serial console */
 	viper_init_serial_gpio();
 
-	set_pxa_fb_info(&fb_info);
+	pxa_set_fb_info(NULL, &fb_info);
 
 	/* v1 hardware cannot use the datacs line */
 	version = viper_hw_version();
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index b9b5797..a46f8d1 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -573,7 +573,7 @@ static void __init vpac270_lcd_init(void)
 	}
 
 	vpac270_lcd_screen.pxafb_lcd_power = vpac270_lcd_power;
-	set_pxa_fb_info(&vpac270_lcd_screen);
+	pxa_set_fb_info(NULL, &vpac270_lcd_screen);
 	return;
 
 err2:
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index a323e07..084c724 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -272,7 +272,7 @@ static struct pxafb_mach_info z2_lcd_screen = {
 
 static void __init z2_lcd_init(void)
 {
-	set_pxa_fb_info(&z2_lcd_screen);
+	pxa_set_fb_info(NULL, &z2_lcd_screen);
 }
 #else
 static inline void z2_lcd_init(void) {}
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index f4b053b..3db0ba4 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -847,7 +847,7 @@ static void __init zeus_init(void)
 	if (zeus_setup_fb_gpios())
 		pr_err("Failed to setup fb gpios\n");
 	else
-		set_pxa_fb_info(&zeus_fb_info);
+		pxa_set_fb_info(NULL, &zeus_fb_info);
 
 	pxa_set_mci_info(&zeus_mci_platform_data);
 	pxa_set_udc_info(&zeus_udc_info);
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index a4c784a..5821185 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -208,7 +208,7 @@ static void __init zylonite_init_lcd(void)
 	platform_device_register(&zylonite_backlight_device);
 
 	if (lcd_id & 0x20) {
-		set_pxa_fb_info(&zylonite_sharp_lcd_info);
+		pxa_set_fb_info(NULL, &zylonite_sharp_lcd_info);
 		return;
 	}
 
@@ -220,7 +220,7 @@ static void __init zylonite_init_lcd(void)
 	else
 		zylonite_toshiba_lcd_info.modes = &toshiba_ltm04c380k_mode;
 
-	set_pxa_fb_info(&zylonite_toshiba_lcd_info);
+	pxa_set_fb_info(NULL, &zylonite_toshiba_lcd_info);
 }
 #else
 static inline void zylonite_init_lcd(void) {}
-- 
cgit v1.1


From ccc46e29a63c88aa9ac72aac86ff0cfd5c627a11 Mon Sep 17 00:00:00 2001
From: Haojian Zhuang <haojian.zhuang@marvell.com>
Date: Wed, 24 Nov 2010 11:54:23 +0800
Subject: ARM: pxa: auto compute shift and mult of timer

Use auto-computed shift and mult of timer with new API
clocksource_calc_mult_shift()/clockevents_calc_mult_shift().

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/time.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index e7f64d9..428da3f 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -100,7 +100,6 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 static struct clock_event_device ckevt_pxa_osmr0 = {
 	.name		= "osmr0",
 	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
 	.rating		= 200,
 	.set_next_event	= pxa_osmr0_set_next_event,
 	.set_mode	= pxa_osmr0_set_mode,
@@ -135,8 +134,8 @@ static void __init pxa_timer_init(void)
 
 	init_sched_clock(&cd, pxa_update_sched_clock, 32, clock_tick_rate);
 
-	ckevt_pxa_osmr0.mult =
-		div_sc(clock_tick_rate, NSEC_PER_SEC, ckevt_pxa_osmr0.shift);
+	clocksource_calc_mult_shift(&cksrc_pxa_oscr0, clock_tick_rate, 4);
+	clockevents_calc_mult_shift(&ckevt_pxa_osmr0, clock_tick_rate, 4);
 	ckevt_pxa_osmr0.max_delta_ns =
 		clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0);
 	ckevt_pxa_osmr0.min_delta_ns =
-- 
cgit v1.1


From 133dce0687b4c38184609fa921d060a54dff93e9 Mon Sep 17 00:00:00 2001
From: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Date: Mon, 14 Feb 2011 15:33:16 +0300
Subject: ARM: pxa/eseries: switch to using gpio-vbus transceiver

Switch from handling gpio-vbus in pxa25x_udc to using standard gpio-vbus
tranceiver.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Ian Molton <spyro@f2s.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/eseries.c | 34 ++++++++++++++++++++++++++--------
 1 file changed, 26 insertions(+), 8 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 8fdf5a3..2e3970f 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -20,6 +20,7 @@
 #include <linux/mfd/t7l66xb.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <video/w100fb.h>
 
@@ -51,12 +52,20 @@ void __init eseries_fixup(struct machine_desc *desc,
 		mi->bank[0].size = (64*1024*1024);
 }
 
-struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
+struct gpio_vbus_mach_info e7xx_udc_info = {
 	.gpio_vbus   = GPIO_E7XX_USB_DISC,
 	.gpio_pullup = GPIO_E7XX_USB_PULLUP,
 	.gpio_pullup_inverted = 1
 };
 
+static struct platform_device e7xx_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &e7xx_udc_info,
+	},
+};
+
 struct pxaficp_platform_data e7xx_ficp_platform_data = {
 	.gpio_pwdown		= GPIO_E7XX_IR_OFF,
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
@@ -165,6 +174,7 @@ static struct platform_device e330_tc6387xb_device = {
 
 static struct platform_device *e330_devices[] __initdata = {
 	&e330_tc6387xb_device,
+	&e7xx_gpio_vbus,
 };
 
 static void __init e330_init(void)
@@ -175,7 +185,6 @@ static void __init e330_init(void)
 	eseries_register_clks();
 	eseries_get_tmio_gpios();
 	platform_add_devices(ARRAY_AND_SIZE(e330_devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
 }
 
 MACHINE_START(E330, "Toshiba e330")
@@ -214,6 +223,7 @@ static struct platform_device e350_t7l66xb_device = {
 
 static struct platform_device *e350_devices[] __initdata = {
 	&e350_t7l66xb_device,
+	&e7xx_gpio_vbus,
 };
 
 static void __init e350_init(void)
@@ -224,7 +234,6 @@ static void __init e350_init(void)
 	eseries_register_clks();
 	eseries_get_tmio_gpios();
 	platform_add_devices(ARRAY_AND_SIZE(e350_devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
 }
 
 MACHINE_START(E350, "Toshiba e350")
@@ -333,6 +342,7 @@ static struct platform_device e400_t7l66xb_device = {
 
 static struct platform_device *e400_devices[] __initdata = {
 	&e400_t7l66xb_device,
+	&e7xx_gpio_vbus,
 };
 
 static void __init e400_init(void)
@@ -346,7 +356,6 @@ static void __init e400_init(void)
 	eseries_get_tmio_gpios();
 	pxa_set_fb_info(NULL, &e400_pxafb_mach_info);
 	platform_add_devices(ARRAY_AND_SIZE(e400_devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
 }
 
 MACHINE_START(E400, "Toshiba e400")
@@ -519,6 +528,7 @@ static struct platform_device e740_t7l66xb_device = {
 static struct platform_device *e740_devices[] __initdata = {
 	&e740_fb_device,
 	&e740_t7l66xb_device,
+	&e7xx_gpio_vbus,
 };
 
 static void __init e740_init(void)
@@ -532,7 +542,6 @@ static void __init e740_init(void)
 			"UDCCLK", &pxa25x_device_udc.dev),
 	eseries_get_tmio_gpios();
 	platform_add_devices(ARRAY_AND_SIZE(e740_devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
 	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&e7xx_ficp_platform_data);
 }
@@ -711,6 +720,7 @@ static struct platform_device e750_tc6393xb_device = {
 static struct platform_device *e750_devices[] __initdata = {
 	&e750_fb_device,
 	&e750_tc6393xb_device,
+	&e7xx_gpio_vbus,
 };
 
 static void __init e750_init(void)
@@ -723,7 +733,6 @@ static void __init e750_init(void)
 			"GPIO11_CLK", NULL),
 	eseries_get_tmio_gpios();
 	platform_add_devices(ARRAY_AND_SIZE(e750_devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
 	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&e7xx_ficp_platform_data);
 }
@@ -873,12 +882,21 @@ static struct platform_device e800_fb_device = {
 
 /* --------------------------- UDC definitions --------------------------- */
 
-static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
+static struct gpio_vbus_mach_info e800_udc_info = {
 	.gpio_vbus   = GPIO_E800_USB_DISC,
 	.gpio_pullup = GPIO_E800_USB_PULLUP,
 	.gpio_pullup_inverted = 1
 };
 
+static struct platform_device e800_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &e800_udc_info,
+	},
+};
+
+
 /* ----------------- e800 tc6393xb parameters ------------------ */
 
 static struct tc6393xb_platform_data e800_tc6393xb_info = {
@@ -907,6 +925,7 @@ static struct platform_device e800_tc6393xb_device = {
 static struct platform_device *e800_devices[] __initdata = {
 	&e800_fb_device,
 	&e800_tc6393xb_device,
+	&e800_gpio_vbus,
 };
 
 static void __init e800_init(void)
@@ -919,7 +938,6 @@ static void __init e800_init(void)
 			"GPIO11_CLK", NULL),
 	eseries_get_tmio_gpios();
 	platform_add_devices(ARRAY_AND_SIZE(e800_devices));
-	pxa_set_udc_info(&e800_udc_mach_info);
 	pxa_set_ac97_info(NULL);
 }
 
-- 
cgit v1.1


From d19f4cbd4ba08d32d5e5d0cbc98f920fcc225448 Mon Sep 17 00:00:00 2001
From: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Date: Mon, 14 Feb 2011 15:33:17 +0300
Subject: ARM: pxa/gumstix: switch to using gpio-vbus transceiver

Switch from handling gpio-vbus in pxa25x_udc to using standard gpio-vbus
tranceiver.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Steve Sakoman <sakoman@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/gumstix.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 6fd319e..d65e4bd 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -26,6 +26,7 @@
 #include <linux/gpio.h>
 #include <linux/err.h>
 #include <linux/clk.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
@@ -106,14 +107,22 @@ static void __init gumstix_mmc_init(void)
 #endif
 
 #ifdef CONFIG_USB_GADGET_PXA25X
-static struct pxa2xx_udc_mach_info gumstix_udc_info __initdata = {
+static struct gpio_vbus_mach_info gumstix_udc_info = {
 	.gpio_vbus		= GPIO_GUMSTIX_USB_GPIOn,
 	.gpio_pullup		= GPIO_GUMSTIX_USB_GPIOx,
 };
 
+static struct platform_device gumstix_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gumstix_udc_info,
+	},
+};
+
 static void __init gumstix_udc_init(void)
 {
-	pxa_set_udc_info(&gumstix_udc_info);
+	platform_device_register(&gumstix_gpio_vbus);
 }
 #else
 static void gumstix_udc_init(void)
-- 
cgit v1.1


From ef8b3cc68a1df83717bc8f9e7737084246a56ce2 Mon Sep 17 00:00:00 2001
From: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Date: Mon, 14 Feb 2011 15:33:18 +0300
Subject: ARM: pxa/tosa: switch to using gpio-vbus transceiver

Switch from handling gpio-vbus in pxa25x_udc to using standard gpio-vbus
tranceiver.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/tosa.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index f2582ec..93a8903 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -34,6 +34,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/input/matrix_keypad.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -240,12 +241,20 @@ static struct scoop_pcmcia_config tosa_pcmcia_config = {
 /*
  * USB Device Controller
  */
-static struct pxa2xx_udc_mach_info udc_info __initdata = {
+static struct gpio_vbus_mach_info tosa_udc_info = {
 	.gpio_pullup		= TOSA_GPIO_USB_PULLUP,
 	.gpio_vbus		= TOSA_GPIO_USB_IN,
 	.gpio_vbus_inverted	= 1,
 };
 
+static struct platform_device tosa_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &tosa_udc_info,
+	},
+};
+
 /*
  * MMC/SD Device
  */
@@ -891,6 +900,7 @@ static struct platform_device *devices[] __initdata = {
 	&tosa_bt_device,
 	&sharpsl_rom_device,
 	&wm9712_device,
+	&tosa_gpio_vbus,
 };
 
 static void tosa_poweroff(void)
@@ -937,7 +947,6 @@ static void __init tosa_init(void)
 	dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
 
 	pxa_set_mci_info(&tosa_mci_platform_data);
-	pxa_set_udc_info(&udc_info);
 	pxa_set_ficp_info(&tosa_ficp_platform_data);
 	pxa_set_i2c_info(NULL);
 	pxa_set_ac97_info(NULL);
-- 
cgit v1.1


From 1014cc38280f29ea0a39ec9a853fa0c3fdfebc7c Mon Sep 17 00:00:00 2001
From: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Date: Mon, 14 Feb 2011 15:33:20 +0300
Subject: ARM: pxa: drop gpio_vbus field from pxa2xx_udc_mach_info

Neither pxa25x_udc, nor pxa27x_udc use gpio_vbus/gpio_vbus_inverted
anymore. Drop those two fields from udc info completely.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/include/asm/mach/udc_pxa2xx.h | 2 --
 arch/arm/mach-pxa/corgi.c              | 1 -
 arch/arm/mach-pxa/devices.c            | 1 -
 3 files changed, 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h
index 833306e..ea297ac 100644
--- a/arch/arm/include/asm/mach/udc_pxa2xx.h
+++ b/arch/arm/include/asm/mach/udc_pxa2xx.h
@@ -20,8 +20,6 @@ struct pxa2xx_udc_mach_info {
 	 * VBUS IRQ and omit the methods above.  Store the GPIO number
 	 * here.  Note that sometimes the signals go through inverters...
 	 */
-	bool	gpio_vbus_inverted;
-	int	gpio_vbus;			/* high == vbus present */
 	bool	gpio_pullup_inverted;
 	int	gpio_pullup;			/* high == pullup activated */
 };
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index a5452a3..002be00 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -462,7 +462,6 @@ static struct pxaficp_platform_data corgi_ficp_platform_data = {
  * USB Device Controller
  */
 static struct pxa2xx_udc_mach_info udc_info __initdata = {
-	.gpio_vbus		= -1,
 	/* no connect GPIO; corgi can't tell connection status */
 	.gpio_pullup		= CORGI_GPIO_USB_PULLUP,
 };
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index edfe803..8dcc92b 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -90,7 +90,6 @@ void __init pxa_set_mci_info(struct pxamci_platform_data *info)
 
 static struct pxa2xx_udc_mach_info pxa_udc_info = {
 	.gpio_pullup = -1,
-	.gpio_vbus   = -1,
 };
 
 void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
-- 
cgit v1.1


From 2e62344de8e2a7e402fe2a009c3d09bc6fd589e6 Mon Sep 17 00:00:00 2001
From: Vasily Khoruzhick <anarsoul@gmail.com>
Date: Sun, 13 Mar 2011 17:19:17 +0200
Subject: ARM: PXA: Z2: Use only power button as wake source

It's very easy to press some keypad key when Z2 is closed,
so to prevent unexpected wakeups, use only 'Power' key to wake
Z2 from sleep.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
---
 arch/arm/mach-pxa/z2.c | 32 +++++++++++++++++++++++---------
 1 file changed, 23 insertions(+), 9 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index 084c724..db6199c 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -92,13 +92,13 @@ static unsigned long z2_pin_config[] = {
 	GPIO47_STUART_TXD,
 
 	/* Keypad */
-	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO34_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO38_KP_MKIN_4	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO16_KP_MKIN_5	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO17_KP_MKIN_6	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO100_KP_MKIN_0,
+	GPIO101_KP_MKIN_1,
+	GPIO102_KP_MKIN_2,
+	GPIO34_KP_MKIN_3,
+	GPIO38_KP_MKIN_4,
+	GPIO16_KP_MKIN_5,
+	GPIO17_KP_MKIN_6,
 	GPIO103_KP_MKOUT_0,
 	GPIO104_KP_MKOUT_1,
 	GPIO105_KP_MKOUT_2,
@@ -428,8 +428,22 @@ static inline void z2_mkp_init(void) {}
  ******************************************************************************/
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 static struct gpio_keys_button z2_pxa_buttons[] = {
-	{KEY_POWER, GPIO1_ZIPITZ2_POWER_BUTTON, 0, "Power Button" },
-	{KEY_CLOSE, GPIO98_ZIPITZ2_LID_BUTTON, 0, "Lid Button" },
+	{
+		.code		= KEY_POWER,
+		.gpio		= GPIO1_ZIPITZ2_POWER_BUTTON,
+		.active_low	= 0,
+		.desc		= "Power Button",
+		.wakeup		= 1,
+		.type		= EV_KEY,
+	},
+	{
+		.code		= KEY_CLOSE,
+		.gpio		= GPIO98_ZIPITZ2_LID_BUTTON,
+		.active_low	= 0,
+		.desc		= "Lid Button",
+		.wakeup		= 0
+		.type		= EV_KEY,
+	},
 };
 
 static struct gpio_keys_platform_data z2_pxa_keys_data = {
-- 
cgit v1.1


From 233cdbce55b8948b46fcd76ad77c1f33b8c01095 Mon Sep 17 00:00:00 2001
From: Vasily Khoruzhick <anarsoul@gmail.com>
Date: Sun, 13 Mar 2011 17:19:18 +0200
Subject: ARM: PXA: Z2: Fix battery pdata

Fix coefficients to get actual voltage, and make
voltage_max/voltage_min looks like values for LiIon battery.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
---
 arch/arm/mach-pxa/z2.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index db6199c..31db09b 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -476,9 +476,9 @@ static struct z2_battery_info batt_chip_info = {
 	.batt_I2C_addr	= 0x55,
 	.batt_I2C_reg	= 2,
 	.charge_gpio	= GPIO0_ZIPITZ2_AC_DETECT,
-	.min_voltage	= 2400000,
-	.max_voltage	= 3700000,
-	.batt_div	= 69,
+	.min_voltage	= 3475000,
+	.max_voltage	= 4190000,
+	.batt_div	= 59,
 	.batt_mult	= 1000000,
 	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LION,
 	.batt_name	= "Z2",
-- 
cgit v1.1


From b8f56a78e3a161f10bfd4e648a3d3828718aaa80 Mon Sep 17 00:00:00 2001
From: Vasily Khoruzhick <anarsoul@gmail.com>
Date: Sun, 13 Mar 2011 17:19:19 +0200
Subject: ARM: PXA: Z2: Fix libertas init/tear down sequences

GPIO15 seems to be not related to WiFi, so don't touch it.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
---
 arch/arm/mach-pxa/include/mach/z2.h |  3 +--
 arch/arm/mach-pxa/z2.c              | 31 ++++++++-----------------------
 2 files changed, 9 insertions(+), 25 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/include/mach/z2.h b/arch/arm/mach-pxa/include/mach/z2.h
index 8835c16..7b0f71e 100644
--- a/arch/arm/mach-pxa/include/mach/z2.h
+++ b/arch/arm/mach-pxa/include/mach/z2.h
@@ -25,8 +25,7 @@
 #define	GPIO98_ZIPITZ2_LID_BUTTON	98
 
 /* Libertas GSPI8686 WiFi */
-#define	GPIO14_ZIPITZ2_WIFI_RESET	14
-#define	GPIO15_ZIPITZ2_WIFI_POWER	15
+#define	GPIO14_ZIPITZ2_WIFI_POWER	14
 #define	GPIO24_ZIPITZ2_WIFI_CS		24
 #define	GPIO36_ZIPITZ2_WIFI_IRQ		36
 
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index 31db09b..4df1ecb 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -139,8 +139,7 @@ static unsigned long z2_pin_config[] = {
 	GPIO1_GPIO,		/* Power button */
 	GPIO37_GPIO,		/* Headphone detect */
 	GPIO98_GPIO,		/* Lid switch */
-	GPIO14_GPIO,		/* WiFi Reset */
-	GPIO15_GPIO,		/* WiFi Power */
+	GPIO14_GPIO,		/* WiFi Power */
 	GPIO24_GPIO,		/* WiFi CS */
 	GPIO36_GPIO,		/* WiFi IRQ */
 	GPIO88_GPIO,		/* LCD CS */
@@ -512,26 +511,16 @@ static int z2_lbs_spi_setup(struct spi_device *spi)
 {
 	int ret = 0;
 
-	ret = gpio_request(GPIO15_ZIPITZ2_WIFI_POWER, "WiFi Power");
+	ret = gpio_request(GPIO14_ZIPITZ2_WIFI_POWER, "WiFi Power");
 	if (ret)
 		goto err;
 
-	ret = gpio_direction_output(GPIO15_ZIPITZ2_WIFI_POWER, 1);
+	ret = gpio_direction_output(GPIO14_ZIPITZ2_WIFI_POWER, 1);
 	if (ret)
 		goto err2;
 
-	ret = gpio_request(GPIO14_ZIPITZ2_WIFI_RESET, "WiFi Reset");
-	if (ret)
-		goto err2;
-
-	ret = gpio_direction_output(GPIO14_ZIPITZ2_WIFI_RESET, 0);
-	if (ret)
-		goto err3;
-
-	/* Reset the card */
+	/* Wait until card is powered on */
 	mdelay(180);
-	gpio_set_value(GPIO14_ZIPITZ2_WIFI_RESET, 1);
-	mdelay(20);
 
 	spi->bits_per_word = 16;
 	spi->mode = SPI_MODE_2,
@@ -540,22 +529,18 @@ static int z2_lbs_spi_setup(struct spi_device *spi)
 
 	return 0;
 
-err3:
-	gpio_free(GPIO14_ZIPITZ2_WIFI_RESET);
 err2:
-	gpio_free(GPIO15_ZIPITZ2_WIFI_POWER);
+	gpio_free(GPIO14_ZIPITZ2_WIFI_POWER);
 err:
 	return ret;
 };
 
 static int z2_lbs_spi_teardown(struct spi_device *spi)
 {
-	gpio_set_value(GPIO14_ZIPITZ2_WIFI_RESET, 0);
-	gpio_set_value(GPIO15_ZIPITZ2_WIFI_POWER, 0);
-	gpio_free(GPIO14_ZIPITZ2_WIFI_RESET);
-	gpio_free(GPIO15_ZIPITZ2_WIFI_POWER);
-	return 0;
+	gpio_set_value(GPIO14_ZIPITZ2_WIFI_POWER, 0);
+	gpio_free(GPIO14_ZIPITZ2_WIFI_POWER);
 
+	return 0;
 };
 
 static struct pxa2xx_spi_chip z2_lbs_chip_info = {
-- 
cgit v1.1


From 034e17563b90fa20342b78a2faac9cba3a1c4a38 Mon Sep 17 00:00:00 2001
From: Vasily Khoruzhick <anarsoul@gmail.com>
Date: Sun, 13 Mar 2011 17:19:20 +0200
Subject: ARM: PXA: Z2: Keep kbd backlight disabled by default

It eats too much power, and anyway it's not usefull
during boot process. Userspace can enable it later.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
---
 arch/arm/mach-pxa/z2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index 4df1ecb..9b6ab07 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -204,7 +204,7 @@ static struct platform_pwm_backlight_data z2_backlight_data[] = {
 		/* Keypad Backlight */
 		.pwm_id		= 1,
 		.max_brightness	= 1023,
-		.dft_brightness	= 512,
+		.dft_brightness	= 0,
 		.pwm_period_ns	= 1260320,
 	},
 	[1] = {
-- 
cgit v1.1


From 54d5710058ebe34451f4ab1d73d86cd8214897b7 Mon Sep 17 00:00:00 2001
From: Vasily Khoruzhick <anarsoul@gmail.com>
Date: Sun, 13 Mar 2011 17:19:21 +0200
Subject: ARM: PXA: Z2: Add default triggers for LEDs

So user can see if there's any mmc activity and if device's
charging.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
---
 arch/arm/mach-pxa/z2.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index 9b6ab07..3ab73f3 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -309,12 +309,12 @@ struct gpio_led z2_gpio_leds[] = {
 	.active_low		= 1,
 }, {
 	.name			= "z2:green:charged",
-	.default_trigger	= "none",
+	.default_trigger	= "mmc0",
 	.gpio			= GPIO85_ZIPITZ2_LED_CHARGED,
 	.active_low		= 1,
 }, {
 	.name			= "z2:amber:charging",
-	.default_trigger	= "none",
+	.default_trigger	= "Z2-charging-or-full",
 	.gpio			= GPIO83_ZIPITZ2_LED_CHARGING,
 	.active_low		= 1,
 },
-- 
cgit v1.1


From e3b1ceedf7adc4adfc989ee78a30fca7b62480b5 Mon Sep 17 00:00:00 2001
From: Vasily Khoruzhick <anarsoul@gmail.com>
Date: Sun, 13 Mar 2011 17:19:22 +0200
Subject: ARM: PXA: Z2: Use switch event for lid

Otherwise userspace might be confused.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
---
 arch/arm/mach-pxa/z2.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index 3ab73f3..d9322dd 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -436,12 +436,12 @@ static struct gpio_keys_button z2_pxa_buttons[] = {
 		.type		= EV_KEY,
 	},
 	{
-		.code		= KEY_CLOSE,
+		.code		= SW_LID,
 		.gpio		= GPIO98_ZIPITZ2_LID_BUTTON,
-		.active_low	= 0,
-		.desc		= "Lid Button",
-		.wakeup		= 0
-		.type		= EV_KEY,
+		.active_low	= 1,
+		.desc		= "Lid Switch",
+		.wakeup		= 0,
+		.type		= EV_SW,
 	},
 };
 
-- 
cgit v1.1


From 8aad172e6c54c74b1effe88ded2f308db3e1b658 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Mon, 7 Mar 2011 13:55:15 +0800
Subject: ARM: pxa/am200epd: fix leak in am200_init_gpio_regs error path

If gpio_request fails when i > 0, gpios[0] is not freed in current
implementation.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/am200epd.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
index 10964e3..4cb069f 100644
--- a/arch/arm/mach-pxa/am200epd.c
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -128,8 +128,8 @@ static int am200_init_gpio_regs(struct metronomefb_par *par)
 	return 0;
 
 err_req_gpio:
-	while (i > 0)
-		gpio_free(gpios[i--]);
+	while (--i >= 0)
+		gpio_free(gpios[i]);
 
 	return err;
 }
-- 
cgit v1.1


From 5898eb79fb45d4fd4ce22139c168de937bfaab38 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Mon, 7 Mar 2011 13:56:11 +0800
Subject: ARM: pxa/am300epd: fix leak in am300_init_gpio_regs error path

If gpio_request fails when i > 0, gpios[0] is not freed in current
implementation.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/am300epd.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c
index 993d75e..fa8bad2 100644
--- a/arch/arm/mach-pxa/am300epd.c
+++ b/arch/arm/mach-pxa/am300epd.c
@@ -125,10 +125,7 @@ static int am300_init_gpio_regs(struct broadsheetfb_par *par)
 		if (err) {
 			dev_err(&am300_device->dev, "failed requesting "
 				"gpio %d, err=%d\n", i, err);
-			while (i >= DB0_GPIO_PIN)
-				gpio_free(i--);
-			i = ARRAY_SIZE(gpios) - 1;
-			goto err_req_gpio;
+			goto err_req_gpio2;
 		}
 	}
 
@@ -159,9 +156,13 @@ static int am300_init_gpio_regs(struct broadsheetfb_par *par)
 
 	return 0;
 
+err_req_gpio2:
+	while (--i >= DB0_GPIO_PIN)
+		gpio_free(i);
+	i = ARRAY_SIZE(gpios);
 err_req_gpio:
-	while (i > 0)
-		gpio_free(gpios[i--]);
+	while (--i >= 0)
+		gpio_free(gpios[i]);
 
 	return err;
 }
-- 
cgit v1.1


From 7780c803bd103895a9c1c9a3c91db5b45c66e367 Mon Sep 17 00:00:00 2001
From: Robin Becker <replabrobin@gmail.com>
Date: Sat, 12 Mar 2011 15:32:45 +0000
Subject: arm: mach-kirkwood: add led in sheevaplug-setup.c

This patch adds a second, red, led for the standard sheevaplug.
The sheeva_esata mpp config is left unchanged.

Tested on a standard sheevaplug

Signed-off-by: Robin Becker <robin@reportlab.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
---
 arch/arm/mach-kirkwood/sheevaplug-setup.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 0a95063..17de0bf 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -58,6 +58,12 @@ static struct mvsdio_platform_data sheeva_esata_mvsdio_data = {
 
 static struct gpio_led sheevaplug_led_pins[] = {
 	{
+		.name			= "plug:red:misc",
+		.default_trigger	= "none",
+		.gpio			= 46,
+		.active_low		= 1,
+	},
+	{
 		.name			= "plug:green:health",
 		.default_trigger	= "default-on",
 		.gpio			= 49,
@@ -80,6 +86,7 @@ static struct platform_device sheevaplug_leds = {
 
 static unsigned int sheevaplug_mpp_config[] __initdata = {
 	MPP29_GPIO,	/* USB Power Enable */
+	MPP46_GPIO,	/* LED Red */
 	MPP49_GPIO,	/* LED */
 	0
 };
-- 
cgit v1.1


From 76422dbf3ccdd46d925cdb0909445e4616b55187 Mon Sep 17 00:00:00 2001
From: Fabio Estevam <festevam@gmail.com>
Date: Thu, 17 Mar 2011 23:32:11 -0300
Subject: ARM: mx51: Print silicon revision on boot

Having the silicon revision to appear on the boot log is a useful information.

MX31 and MX35 already show the silicon revision on boot.

Add support for displaying such information for MX51 as well.

Tested on a MX51EVK, where it shows:

CPU identified as i.MX51, silicon rev 3.0

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx5/clock-mx51-mx53.c   |  1 +
 arch/arm/mach-mx5/cpu.c               | 20 ++++++++++++++++++++
 arch/arm/plat-mxc/include/mach/mx51.h |  1 +
 arch/arm/plat-mxc/include/mach/mxc.h  | 14 ++++++++++++++
 4 files changed, 36 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index 652ace4..cc6ad1c 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -1511,6 +1511,7 @@ int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
 	clk_enable(&iim_clk);
 	mx51_revision();
 	clk_disable(&iim_clk);
+	mx51_display_revision();
 
 	/* move usb_phy_clk to 24MHz */
 	clk_set_parent(&usb_phy1_clk, &osc_clk);
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
index df46b5e..3b4c307 100644
--- a/arch/arm/mach-mx5/cpu.c
+++ b/arch/arm/mach-mx5/cpu.c
@@ -51,6 +51,26 @@ int mx51_revision(void)
 }
 EXPORT_SYMBOL(mx51_revision);
 
+void mx51_display_revision(void)
+{
+	int rev;
+	char *srev;
+	rev = mx51_revision();
+
+	switch (rev) {
+	case IMX_CHIP_REVISION_2_0:
+		srev = IMX_CHIP_REVISION_2_0_STRING;
+		break;
+	case IMX_CHIP_REVISION_3_0:
+		srev = IMX_CHIP_REVISION_3_0_STRING;
+		break;
+	default:
+		srev = IMX_CHIP_REVISION_UNKNOWN_STRING;
+	}
+	printk(KERN_INFO "CPU identified as i.MX51, silicon rev %s\n", srev);
+}
+EXPORT_SYMBOL(mx51_display_revision);
+
 #ifdef CONFIG_NEON
 
 /*
diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h
index 1eb339e..dede19a 100644
--- a/arch/arm/plat-mxc/include/mach/mx51.h
+++ b/arch/arm/plat-mxc/include/mach/mx51.h
@@ -347,6 +347,7 @@
 
 #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
 extern int mx51_revision(void);
+extern void mx51_display_revision(void);
 #endif
 
 /* tape-out 1 defines */
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 7e07263..3322c7a 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -51,6 +51,20 @@
 #define IMX_CHIP_REVISION_3_3		0x33
 #define IMX_CHIP_REVISION_UNKNOWN	0xff
 
+#define IMX_CHIP_REVISION_1_0_STRING		"1.0"
+#define IMX_CHIP_REVISION_1_1_STRING		"1.1"
+#define IMX_CHIP_REVISION_1_2_STRING		"1.2"
+#define IMX_CHIP_REVISION_1_3_STRING		"1.3"
+#define IMX_CHIP_REVISION_2_0_STRING		"2.0"
+#define IMX_CHIP_REVISION_2_1_STRING		"2.1"
+#define IMX_CHIP_REVISION_2_2_STRING		"2.2"
+#define IMX_CHIP_REVISION_2_3_STRING		"2.3"
+#define IMX_CHIP_REVISION_3_0_STRING		"3.0"
+#define IMX_CHIP_REVISION_3_1_STRING		"3.1"
+#define IMX_CHIP_REVISION_3_2_STRING		"3.2"
+#define IMX_CHIP_REVISION_3_3_STRING		"3.3"
+#define IMX_CHIP_REVISION_UNKNOWN_STRING	"unknown"
+
 #ifndef __ASSEMBLY__
 extern unsigned int __mxc_cpu_type;
 #endif
-- 
cgit v1.1


From 14fb20c9d25be4ee115cafd7201d4833664ae59d Mon Sep 17 00:00:00 2001
From: Frank Li <Frank.Li@freescale.com>
Date: Tue, 15 Mar 2011 17:04:10 +0800
Subject: ARM: mx53_loco: Add GPIO Keypad support

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx5/Kconfig           |  1 +
 arch/arm/mach-mx5/board-mx53_loco.c | 25 +++++++++++++++++++++++++
 2 files changed, 26 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index 83ee088..159340d 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -165,6 +165,7 @@ config MACH_MX53_LOCO
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	help
 	  Include support for MX53 LOCO platform. This includes specific
 	  configurations for the board and its peripherals.
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 0a18f8d..10a1bea 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -36,6 +36,9 @@
 #include "crm_regs.h"
 #include "devices-imx53.h"
 
+#define MX53_LOCO_POWER			IMX_GPIO_NR(1, 8)
+#define MX53_LOCO_UI1			IMX_GPIO_NR(2, 14)
+#define MX53_LOCO_UI2			IMX_GPIO_NR(2, 15)
 #define LOCO_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
 
 static iomux_v3_cfg_t mx53_loco_pads[] = {
@@ -180,6 +183,27 @@ static iomux_v3_cfg_t mx53_loco_pads[] = {
 	MX53_PAD_GPIO_8__GPIO1_8,
 };
 
+#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake)	\
+{								\
+	.gpio		= gpio_num,				\
+	.type		= EV_KEY,				\
+	.code		= ev_code,				\
+	.active_low	= act_low,				\
+	.desc		= "btn " descr,				\
+	.wakeup		= wake,					\
+}
+
+static const struct gpio_keys_button loco_buttons[] __initconst = {
+	GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0),
+	GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0),
+	GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0),
+};
+
+static const struct gpio_keys_platform_data loco_button_data __initconst = {
+	.buttons        = loco_buttons,
+	.nbuttons       = ARRAY_SIZE(loco_buttons),
+};
+
 static inline void mx53_loco_fec_reset(void)
 {
 	int ret;
@@ -215,6 +239,7 @@ static void __init mx53_loco_board_init(void)
 	imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
 	imx53_add_sdhci_esdhc_imx(0, NULL);
 	imx53_add_sdhci_esdhc_imx(2, NULL);
+	imx_add_gpio_keys(&loco_button_data);
 }
 
 static void __init mx53_loco_timer_init(void)
-- 
cgit v1.1


From ce191e415cd0c6d5240caf5c6827500842868da2 Mon Sep 17 00:00:00 2001
From: Fabio Estevam <festevam@gmail.com>
Date: Wed, 16 Mar 2011 22:52:31 -0300
Subject: ARM: mx5/babbage: Use gpio_request_one in babbage_fec_reset
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Current code inside babbage_fec_reset uses gpio_direction_output with initial value of the GPIO and also sets
the GPIO value via gpio_set_value to the same level right after. This is not needed.

By using gpio_request_one it is possible to set the direction and initial value in one shot.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx5/board-mx51_babbage.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index b2ecd19..bea4e41 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -228,13 +228,12 @@ static inline void babbage_fec_reset(void)
 	int ret;
 
 	/* reset FEC PHY */
-	ret = gpio_request(BABBAGE_FEC_PHY_RESET, "fec-phy-reset");
+	ret = gpio_request_one(BABBAGE_FEC_PHY_RESET,
+					GPIOF_OUT_INIT_LOW, "fec-phy-reset");
 	if (ret) {
 		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
 		return;
 	}
-	gpio_direction_output(BABBAGE_FEC_PHY_RESET, 0);
-	gpio_set_value(BABBAGE_FEC_PHY_RESET, 0);
 	msleep(1);
 	gpio_set_value(BABBAGE_FEC_PHY_RESET, 1);
 }
-- 
cgit v1.1


From 6ea6392cc4ff9214c7356e8ca71244c006a95ddb Mon Sep 17 00:00:00 2001
From: Fabio Estevam <festevam@gmail.com>
Date: Wed, 16 Mar 2011 22:52:33 -0300
Subject: ARM: mx5/mx53_evk: Use gpio_request_one in mx53_evk_fec_reset
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Current code inside mx53_evk_fec_reset uses gpio_direction_output with initial value of the GPIO and also sets
the GPIO value via gpio_set_value right after. This is not needed.

By using gpio_request_one it is possible to set the direction and initial value in one shot.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx5/board-mx53_evk.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index 7b5735c..d771999 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -82,13 +82,12 @@ static inline void mx53_evk_fec_reset(void)
 	int ret;
 
 	/* reset FEC PHY */
-	ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset");
+	ret = gpio_request_one(SMD_FEC_PHY_RST, GPIOF_OUT_INIT_LOW,
+							"fec-phy-reset");
 	if (ret) {
 		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
 		return;
 	}
-	gpio_direction_output(SMD_FEC_PHY_RST, 0);
-	gpio_set_value(SMD_FEC_PHY_RST, 0);
 	msleep(1);
 	gpio_set_value(SMD_FEC_PHY_RST, 1);
 }
-- 
cgit v1.1


From 350ac9ddce074855030b88c9e8c016574d2e9097 Mon Sep 17 00:00:00 2001
From: Fabio Estevam <festevam@gmail.com>
Date: Wed, 16 Mar 2011 22:52:34 -0300
Subject: ARM: mx5/mx53_evk: Make the reset pin name more meaningful
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

As there is a mx53_smd board in the kernel, using SMD_FEC_PHY_RST as the pin name can be misleading when used
on a MX53_EVK board.

Change the pin name to reflect the board name.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx5/board-mx53_evk.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index d771999..2af3f43 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -34,7 +34,7 @@
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx53.h>
 
-#define SMD_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
+#define MX53_EVK_FEC_PHY_RST	IMX_GPIO_NR(7, 6)
 #define EVK_ECSPI1_CS0		IMX_GPIO_NR(2, 30)
 #define EVK_ECSPI1_CS1		IMX_GPIO_NR(3, 19)
 
@@ -82,14 +82,14 @@ static inline void mx53_evk_fec_reset(void)
 	int ret;
 
 	/* reset FEC PHY */
-	ret = gpio_request_one(SMD_FEC_PHY_RST, GPIOF_OUT_INIT_LOW,
+	ret = gpio_request_one(MX53_EVK_FEC_PHY_RST, GPIOF_OUT_INIT_LOW,
 							"fec-phy-reset");
 	if (ret) {
 		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
 		return;
 	}
 	msleep(1);
-	gpio_set_value(SMD_FEC_PHY_RST, 1);
+	gpio_set_value(MX53_EVK_FEC_PHY_RST, 1);
 }
 
 static struct fec_platform_data mx53_evk_fec_pdata = {
-- 
cgit v1.1


From 93b20e4fdbe1ddc4bef79d968cb1ba453324a499 Mon Sep 17 00:00:00 2001
From: Jan Weitzel <j.weitzel@phytec.de>
Date: Thu, 17 Mar 2011 13:44:29 +0100
Subject: ARM: mxc: Add dummy_get_cycles to avoid access before init is done

this is needed to use get_cycles with sched_clock. Accessing timer
without enabled clk will result in crash

Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/time.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 9f0c261..0142e4b 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -105,6 +105,11 @@ static void gpt_irq_acknowledge(void)
 		__raw_writel(V2_TSTAT_OF1, timer_base + V2_TSTAT);
 }
 
+static cycle_t dummy_get_cycles(struct clocksource *cs)
+{
+	return 0;
+}
+
 static cycle_t mx1_2_get_cycles(struct clocksource *cs)
 {
 	return __raw_readl(timer_base + MX1_2_TCN);
@@ -118,7 +123,7 @@ static cycle_t v2_get_cycles(struct clocksource *cs)
 static struct clocksource clocksource_mxc = {
 	.name 		= "mxc_timer1",
 	.rating		= 200,
-	.read		= mx1_2_get_cycles,
+	.read		= dummy_get_cycles,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
@@ -129,6 +134,8 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
 
 	if (timer_is_v2())
 		clocksource_mxc.read = v2_get_cycles;
+	else
+		clocksource_mxc.read = mx1_2_get_cycles;
 
 	clocksource_register_hz(&clocksource_mxc, c);
 
-- 
cgit v1.1


From c124befc0d1981f5f3e438d06313fa8270a9edb6 Mon Sep 17 00:00:00 2001
From: Jan Weitzel <j.weitzel@phytec.de>
Date: Thu, 17 Mar 2011 13:44:30 +0100
Subject: ARM: mxc: Add sched_clock to mxc platform

Add sched_clock using cyc_to_sched_clock and update_sched_clock
with HAVE_SCHED_CLOCK
tested on iMX27 and iMX35

Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/Kconfig         |  1 +
 arch/arm/plat-mxc/time.c | 16 ++++++++++++++++
 2 files changed, 17 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 599e163..f4027ab 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -362,6 +362,7 @@ config ARCH_MXC
 	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
+	select HAVE_SCHED_CLOCK
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 0142e4b..2237ff8 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -27,6 +27,7 @@
 #include <linux/clk.h>
 
 #include <mach/hardware.h>
+#include <asm/sched_clock.h>
 #include <asm/mach/time.h>
 #include <mach/common.h>
 
@@ -128,6 +129,20 @@ static struct clocksource clocksource_mxc = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+static DEFINE_CLOCK_DATA(cd);
+unsigned long long notrace sched_clock(void)
+{
+	cycle_t cyc = clocksource_mxc.read(&clocksource_mxc);
+
+	return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+}
+
+static void notrace mxc_update_sched_clock(void)
+{
+	cycle_t cyc = clocksource_mxc.read(&clocksource_mxc);
+	update_sched_clock(&cd, cyc, (u32)~0);
+}
+
 static int __init mxc_clocksource_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
@@ -137,6 +152,7 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
 	else
 		clocksource_mxc.read = mx1_2_get_cycles;
 
+	init_sched_clock(&cd, mxc_update_sched_clock, 32, c);
 	clocksource_register_hz(&clocksource_mxc, c);
 
 	return 0;
-- 
cgit v1.1


From 0ff2593bf6c06cd99f5414295ecb31bc629b3d15 Mon Sep 17 00:00:00 2001
From: Julien Boibessot <julien.boibessot@armadeus.com>
Date: Fri, 18 Mar 2011 09:31:46 +0100
Subject: MX51: Add AUDMUX ports definitions

Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/audmux.h | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-mxc/include/mach/audmux.h b/arch/arm/plat-mxc/include/mach/audmux.h
index 5cd6466..6fda788 100644
--- a/arch/arm/plat-mxc/include/mach/audmux.h
+++ b/arch/arm/plat-mxc/include/mach/audmux.h
@@ -15,6 +15,14 @@
 #define MX31_AUDMUX_PORT5_SSI_PINS_5	4
 #define MX31_AUDMUX_PORT6_SSI_PINS_6	5
 
+#define MX51_AUDMUX_PORT1_SSI0		0
+#define MX51_AUDMUX_PORT2_SSI1		1
+#define MX51_AUDMUX_PORT3		2
+#define MX51_AUDMUX_PORT4		3
+#define MX51_AUDMUX_PORT5		4
+#define MX51_AUDMUX_PORT6		5
+#define MX51_AUDMUX_PORT7		6
+
 /* Register definitions for the i.MX21/27 Digital Audio Multiplexer */
 #define MXC_AUDMUX_V1_PCR_INMMASK(x)	((x) & 0xff)
 #define MXC_AUDMUX_V1_PCR_INMEN		(1 << 8)
@@ -28,7 +36,7 @@
 #define MXC_AUDMUX_V1_PCR_TCLKDIR	(1 << 30)
 #define MXC_AUDMUX_V1_PCR_TFSDIR	(1 << 31)
 
-/* Register definitions for the i.MX25/31/35 Digital Audio Multiplexer */
+/* Register definitions for the i.MX25/31/35/51 Digital Audio Multiplexer */
 #define MXC_AUDMUX_V2_PTCR_TFSDIR	(1 << 31)
 #define MXC_AUDMUX_V2_PTCR_TFSEL(x)	(((x) & 0xf) << 27)
 #define MXC_AUDMUX_V2_PTCR_TCLKDIR	(1 << 26)
-- 
cgit v1.1


From 5658bff6c2c4a07fb25195eac70205934b8f5a0d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Fri, 18 Mar 2011 12:24:08 +0100
Subject: ARM: imx: let MACH_IMX27_VISSTRIM_M10 select
 IMX_HAVE_PLATFORM_IMX_SSI
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

mach-imx27_visstrim_m10.c uses imx27_add_imx_ssi() so it needs to select
IMX_HAVE_PLATFORM_IMX_SSI to fix:

	arch/arm/mach-imx/built-in.o: In function `visstrim_m10_board_init':
	mach-imx27_visstrim_m10.c:(.init.text+0x308): undefined reference to `imx_add_imx_ssi'
	mach-imx27_visstrim_m10.c:(.init.text+0x394): undefined reference to `imx27_imx_ssi_data'

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-imx/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 5eec099..56b930a 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -255,6 +255,7 @@ config MACH_IMX27_VISSTRIM_M10
 	bool "Vista Silicon i.MX27 Visstrim_m10"
 	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_EHCI
-- 
cgit v1.1


From 65047a0f695ed975855e9b83bb922ecb1ff250ab Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Fri, 18 Mar 2011 22:05:55 +0800
Subject: ARM i.MX: remove duplicated #include

Remove duplicated #include('s) in
  arch/arm/mach-mx5/mx51_efika.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx5/mx51_efika.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
index 51a67fc..07aea9c 100644
--- a/arch/arm/mach-mx5/mx51_efika.c
+++ b/arch/arm/mach-mx5/mx51_efika.c
@@ -42,7 +42,6 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
-#include <asm/mach-types.h>
 
 #include "devices-imx51.h"
 #include "devices.h"
-- 
cgit v1.1


From 5d18724588a4f632e836357a43b33bf4b538af82 Mon Sep 17 00:00:00 2001
From: Shawn Guo <shawn.guo@linaro.org>
Date: Sun, 20 Mar 2011 11:17:59 +0800
Subject: ARM: mxc: fix buggy '.end' of IORESOURCE_MEM in device codes
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/devices/platform-fec.c       | 2 +-
 arch/arm/plat-mxc/devices/platform-imxdi_rtc.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/plat-mxc/devices/platform-fec.c
index 6561c9d..ccc789e 100644
--- a/arch/arm/plat-mxc/devices/platform-fec.c
+++ b/arch/arm/plat-mxc/devices/platform-fec.c
@@ -53,7 +53,7 @@ struct platform_device *__init imx_add_fec(
 	struct resource res[] = {
 		{
 			.start = data->iobase,
-			.end = data->iobase + SZ_4K,
+			.end = data->iobase + SZ_4K - 1,
 			.flags = IORESOURCE_MEM,
 		}, {
 			.start = data->irq,
diff --git a/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c b/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c
index 10653cc..805336f 100644
--- a/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c
+++ b/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c
@@ -27,7 +27,7 @@ struct platform_device *__init imx_add_imxdi_rtc(
 	struct resource res[] = {
 		{
 			.start = data->iobase,
-			.end = data->iobase + SZ_16K,
+			.end = data->iobase + SZ_16K - 1,
 			.flags = IORESOURCE_MEM,
 		}, {
 			.start = data->irq,
-- 
cgit v1.1


From 021ebc2da02a7f3107a8f31d8a0ebfbe4175429e Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= <LW@KARO-electronics.de>
Date: Mon, 21 Mar 2011 17:48:05 +0100
Subject: ARM: mxs: configure and register the second FEC device on
 TX28/STK5-V4
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mxs/module-tx28.c | 41 +++++++++++++++++++++++++++++++++++------
 arch/arm/mach-mxs/module-tx28.h |  1 +
 2 files changed, 36 insertions(+), 6 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c
index fa0b154..0fcff47 100644
--- a/arch/arm/mach-mxs/module-tx28.c
+++ b/arch/arm/mach-mxs/module-tx28.c
@@ -45,7 +45,7 @@ static const iomux_cfg_t tx28_fec_gpio_pads[] __initconst = {
 };
 
 #define FEC_MODE (MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3)
-static const iomux_cfg_t tx28_fec_pads[] __initconst = {
+static const iomux_cfg_t tx28_fec0_pads[] __initconst = {
 	MX28_PAD_ENET0_MDC__ENET0_MDC | FEC_MODE,
 	MX28_PAD_ENET0_MDIO__ENET0_MDIO | FEC_MODE,
 	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | FEC_MODE,
@@ -57,7 +57,20 @@ static const iomux_cfg_t tx28_fec_pads[] __initconst = {
 	MX28_PAD_ENET_CLK__CLKCTRL_ENET | FEC_MODE,
 };
 
-static const struct fec_platform_data tx28_fec_data __initconst = {
+static const iomux_cfg_t tx28_fec1_pads[] __initconst = {
+	MX28_PAD_ENET0_RXD2__ENET1_RXD0,
+	MX28_PAD_ENET0_RXD3__ENET1_RXD1,
+	MX28_PAD_ENET0_TXD2__ENET1_TXD0,
+	MX28_PAD_ENET0_TXD3__ENET1_TXD1,
+	MX28_PAD_ENET0_COL__ENET1_TX_EN,
+	MX28_PAD_ENET0_CRS__ENET1_RX_EN,
+};
+
+static struct fec_platform_data tx28_fec0_data = {
+	.phy = PHY_INTERFACE_MODE_RMII,
+};
+
+static struct fec_platform_data tx28_fec1_data = {
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 
@@ -108,15 +121,15 @@ int __init tx28_add_fec0(void)
 	pr_debug("%s: Deasserting FEC PHY RESET\n", __func__);
 	gpio_set_value(TX28_FEC_PHY_RESET, 1);
 
-	ret = mxs_iomux_setup_multiple_pads(tx28_fec_pads,
-			ARRAY_SIZE(tx28_fec_pads));
+	ret = mxs_iomux_setup_multiple_pads(tx28_fec0_pads,
+			ARRAY_SIZE(tx28_fec0_pads));
 	if (ret) {
 		pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
 				__func__, ret);
 		goto free_gpios;
 	}
-	pr_debug("%s: Registering FEC device\n", __func__);
-	mx28_add_fec(0, &tx28_fec_data);
+	pr_debug("%s: Registering FEC0 device\n", __func__);
+	mx28_add_fec(0, &tx28_fec0_data);
 	return 0;
 
 free_gpios:
@@ -129,3 +142,19 @@ free_gpios:
 
 	return ret;
 }
+
+int __init tx28_add_fec1(void)
+{
+	int ret;
+
+	ret = mxs_iomux_setup_multiple_pads(tx28_fec1_pads,
+			ARRAY_SIZE(tx28_fec1_pads));
+	if (ret) {
+		pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
+				__func__, ret);
+		return ret;
+	}
+	pr_debug("%s: Registering FEC1 device\n", __func__);
+	mx28_add_fec(1, &tx28_fec1_data);
+	return 0;
+}
diff --git a/arch/arm/mach-mxs/module-tx28.h b/arch/arm/mach-mxs/module-tx28.h
index df9e1b6..8ed4254 100644
--- a/arch/arm/mach-mxs/module-tx28.h
+++ b/arch/arm/mach-mxs/module-tx28.h
@@ -7,3 +7,4 @@
  * Free Software Foundation.
  */
 int __init tx28_add_fec0(void);
+int __init tx28_add_fec1(void);
-- 
cgit v1.1


From 16f246e69b8857c6a2993f1b6663e92d4d4e5395 Mon Sep 17 00:00:00 2001
From: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Date: Mon, 21 Mar 2011 16:30:35 -0500
Subject: ARM: mx50: Add support to get the silicon revision

For MX50, the HW_ADADIG_DIGPROG register in the ANATOP module will
have the correct silicon revision:

Major       Minor   Description
0x50        0x0     TO1.0
0x50        0x1     TO1.1

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx5/cpu.c               | 39 +++++++++++++++++++++++++++++++++++
 arch/arm/plat-mxc/include/mach/mx50.h |  4 ++++
 2 files changed, 43 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
index 3b4c307..472bdfa 100644
--- a/arch/arm/mach-mx5/cpu.c
+++ b/arch/arm/mach-mx5/cpu.c
@@ -21,6 +21,7 @@
 static int cpu_silicon_rev = -1;
 
 #define IIM_SREV 0x24
+#define MX50_HW_ADADIG_DIGPROG	0xB0
 
 static int get_mx51_srev(void)
 {
@@ -127,6 +128,44 @@ int mx53_revision(void)
 }
 EXPORT_SYMBOL(mx53_revision);
 
+static int get_mx50_srev(void)
+{
+	void __iomem *anatop = ioremap(MX50_ANATOP_BASE_ADDR, SZ_8K);
+	u32 rev;
+
+	if (!anatop) {
+		cpu_silicon_rev = -EINVAL;
+		return 0;
+	}
+
+	rev = readl(anatop + MX50_HW_ADADIG_DIGPROG);
+	rev &= 0xff;
+
+	iounmap(anatop);
+	if (rev == 0x0)
+		return IMX_CHIP_REVISION_1_0;
+	else if (rev == 0x1)
+		return IMX_CHIP_REVISION_1_1;
+	return 0;
+}
+
+/*
+ * Returns:
+ *	the silicon revision of the cpu
+ *	-EINVAL - not a mx50
+ */
+int mx50_revision(void)
+{
+	if (!cpu_is_mx50())
+		return -EINVAL;
+
+	if (cpu_silicon_rev == -1)
+		cpu_silicon_rev = get_mx50_srev();
+
+	return cpu_silicon_rev;
+}
+EXPORT_SYMBOL(mx50_revision);
+
 static int __init post_cpu_init(void)
 {
 	unsigned int reg;
diff --git a/arch/arm/plat-mxc/include/mach/mx50.h b/arch/arm/plat-mxc/include/mach/mx50.h
index aaec2a6..5f2da75a 100644
--- a/arch/arm/plat-mxc/include/mach/mx50.h
+++ b/arch/arm/plat-mxc/include/mach/mx50.h
@@ -282,4 +282,8 @@
 #define MX50_INT_APBHDMA_CHAN6	116
 #define MX50_INT_APBHDMA_CHAN7	117
 
+#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
+extern int mx50_revision(void);
+#endif
+
 #endif /* ifndef __MACH_MX50_H__ */
-- 
cgit v1.1


From b6e89b21824cc37ab19e0209a7754c74d237a123 Mon Sep 17 00:00:00 2001
From: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Date: Mon, 21 Mar 2011 16:30:36 -0500
Subject: ARM: mx51: Add entry for gpc_dvfs_clk

For MX51 SRPG, we need to turn on the GPC clock in order to set the
SRPG registers.

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx5/clock-mx51-mx53.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index cc6ad1c..fdbc05e 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -865,6 +865,13 @@ static struct clk aips_tz2_clk = {
 	.disable = _clk_ccgr_disable_inwait,
 };
 
+static struct clk gpc_dvfs_clk = {
+	.enable_reg = MXC_CCM_CCGR5,
+	.enable_shift = MXC_CCM_CCGRx_CG12_OFFSET,
+	.enable = _clk_ccgr_enable,
+	.disable = _clk_ccgr_disable,
+};
+
 static struct clk gpt_32k_clk = {
 	.id = 0,
 	.parent = &ckil_clk,
@@ -1448,6 +1455,7 @@ static struct clk_lookup mx51_lookups[] = {
 	_REGISTER_CLOCK("imx-ipuv3", NULL, ipu_clk)
 	_REGISTER_CLOCK("imx-ipuv3", "di0", ipu_di0_clk)
 	_REGISTER_CLOCK("imx-ipuv3", "di1", ipu_di1_clk)
+	_REGISTER_CLOCK(NULL, "gpc_dvfs", gpc_dvfs_clk)
 };
 
 static struct clk_lookup mx53_lookups[] = {
-- 
cgit v1.1


From 0adf882b6894cd150392400e9642787cf691016a Mon Sep 17 00:00:00 2001
From: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Date: Mon, 21 Mar 2011 16:30:37 -0500
Subject: ARM: mx51: Implement code to allow mx51 to enter WFI

Implement code for MX51 that allows the SoC to enter WFI when
arch_idle is called.

This patch is also necessary for correctly suspending the system.

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx5/Makefile              |  2 +-
 arch/arm/mach-mx5/system.c              | 84 +++++++++++++++++++++++++++++++++
 arch/arm/plat-mxc/include/mach/mxc.h    |  9 ++++
 arch/arm/plat-mxc/include/mach/system.h |  6 ++-
 4 files changed, 99 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-mx5/system.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index 4f63048..0b9338c 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Object file lists.
-obj-y   := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o
+obj-y   := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o system.o
 obj-$(CONFIG_SOC_IMX50) += mm-mx50.o
 
 obj-$(CONFIG_CPU_FREQ_IMX)    += cpu_op-mx51.o
diff --git a/arch/arm/mach-mx5/system.c b/arch/arm/mach-mx5/system.c
new file mode 100644
index 0000000..76ae8dc
--- /dev/null
+++ b/arch/arm/mach-mx5/system.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include "crm_regs.h"
+
+/* set cpu low power mode before WFI instruction. This function is called
+  * mx5 because it can be used for mx50, mx51, and mx53.*/
+void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
+{
+	u32 plat_lpc, arm_srpgcr, ccm_clpcr;
+	u32 empgc0, empgc1;
+	int stop_mode = 0;
+
+	/* always allow platform to issue a deep sleep mode request */
+	plat_lpc = __raw_readl(MXC_CORTEXA8_PLAT_LPC) &
+	    ~(MXC_CORTEXA8_PLAT_LPC_DSM);
+	ccm_clpcr = __raw_readl(MXC_CCM_CLPCR) & ~(MXC_CCM_CLPCR_LPM_MASK);
+	arm_srpgcr = __raw_readl(MXC_SRPG_ARM_SRPGCR) & ~(MXC_SRPGCR_PCR);
+	empgc0 = __raw_readl(MXC_SRPG_EMPGC0_SRPGCR) & ~(MXC_SRPGCR_PCR);
+	empgc1 = __raw_readl(MXC_SRPG_EMPGC1_SRPGCR) & ~(MXC_SRPGCR_PCR);
+
+	switch (mode) {
+	case WAIT_CLOCKED:
+		break;
+	case WAIT_UNCLOCKED:
+		ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
+		break;
+	case WAIT_UNCLOCKED_POWER_OFF:
+	case STOP_POWER_OFF:
+		plat_lpc |= MXC_CORTEXA8_PLAT_LPC_DSM
+			    | MXC_CORTEXA8_PLAT_LPC_DBG_DSM;
+		if (mode == WAIT_UNCLOCKED_POWER_OFF) {
+			ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
+			ccm_clpcr &= ~MXC_CCM_CLPCR_VSTBY;
+			ccm_clpcr &= ~MXC_CCM_CLPCR_SBYOS;
+			stop_mode = 0;
+		} else {
+			ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
+			ccm_clpcr |= 0x3 << MXC_CCM_CLPCR_STBY_COUNT_OFFSET;
+			ccm_clpcr |= MXC_CCM_CLPCR_VSTBY;
+			ccm_clpcr |= MXC_CCM_CLPCR_SBYOS;
+			stop_mode = 1;
+		}
+		arm_srpgcr |= MXC_SRPGCR_PCR;
+
+		if (tzic_enable_wake(1) != 0)
+			return;
+		break;
+	case STOP_POWER_ON:
+		ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
+		break;
+	default:
+		printk(KERN_WARNING "UNKNOWN cpu power mode: %d\n", mode);
+		return;
+	}
+
+	__raw_writel(plat_lpc, MXC_CORTEXA8_PLAT_LPC);
+	__raw_writel(ccm_clpcr, MXC_CCM_CLPCR);
+	__raw_writel(arm_srpgcr, MXC_SRPG_ARM_SRPGCR);
+
+	/* Enable NEON SRPG for all but MX50TO1.0. */
+	if (mx50_revision() != IMX_CHIP_REVISION_1_0)
+		__raw_writel(arm_srpgcr, MXC_SRPG_NEON_SRPGCR);
+
+	if (stop_mode) {
+		empgc0 |= MXC_SRPGCR_PCR;
+		empgc1 |= MXC_SRPGCR_PCR;
+
+		__raw_writel(empgc0, MXC_SRPG_EMPGC0_SRPGCR);
+		__raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR);
+	}
+}
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 3322c7a..1aea818 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -195,6 +195,15 @@ struct cpu_op {
 	u32 cpu_rate;
 };
 
+int tzic_enable_wake(int is_idle);
+enum mxc_cpu_pwr_mode {
+	WAIT_CLOCKED,		/* wfi only */
+	WAIT_UNCLOCKED,		/* WAIT */
+	WAIT_UNCLOCKED_POWER_OFF,	/* WAIT + SRPG */
+	STOP_POWER_ON,		/* just STOP */
+	STOP_POWER_OFF,		/* STOP + SRPG */
+};
+
 extern struct cpu_op *(*get_cpu_op)(int *op);
 #endif
 
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index 95be51b..0417da9 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -20,6 +20,8 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 
+extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
+
 static inline void arch_idle(void)
 {
 #ifdef CONFIG_ARCH_MXC91231
@@ -54,7 +56,9 @@ static inline void arch_idle(void)
 			"orr %0, %0, #0x00000004\n"
 			"mcr p15, 0, %0, c1, c0, 0\n"
 			: "=r" (reg));
-	} else
+	} else if (cpu_is_mx51())
+		mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+	else
 		cpu_do_idle();
 }
 
-- 
cgit v1.1


From 58d5ad5e3c39311835ffcf80353d1318e4f9c155 Mon Sep 17 00:00:00 2001
From: Julien Boibessot <julien.boibessot@armadeus.com>
Date: Thu, 24 Mar 2011 17:29:15 +0100
Subject: mx2/iomux: Set direction for CSPI2 pins

Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/iomux-mx2x.h | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
index c4f116d..7a9b20a 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
@@ -90,12 +90,12 @@
 #define PC31_PF_SSI3_CLK	(GPIO_PORTC | GPIO_PF | GPIO_IN | 31)
 #define PD17_PF_I2C_DATA	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
 #define PD18_PF_I2C_CLK		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
-#define PD19_PF_CSPI2_SS2	(GPIO_PORTD | GPIO_PF | 19)
-#define PD20_PF_CSPI2_SS1	(GPIO_PORTD | GPIO_PF | 20)
-#define PD21_PF_CSPI2_SS0	(GPIO_PORTD | GPIO_PF | 21)
-#define PD22_PF_CSPI2_SCLK	(GPIO_PORTD | GPIO_PF | 22)
-#define PD23_PF_CSPI2_MISO	(GPIO_PORTD | GPIO_PF | 23)
-#define PD24_PF_CSPI2_MOSI	(GPIO_PORTD | GPIO_PF | 24)
+#define PD19_PF_CSPI2_SS2	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 19)
+#define PD20_PF_CSPI2_SS1	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 20)
+#define PD21_PF_CSPI2_SS0	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 21)
+#define PD22_PF_CSPI2_SCLK	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 22)
+#define PD23_PF_CSPI2_MISO	(GPIO_PORTD | GPIO_PF | GPIO_IN | 23)
+#define PD24_PF_CSPI2_MOSI	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 24)
 #define PD25_PF_CSPI1_RDY	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
 #define PD26_PF_CSPI1_SS2	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
 #define PD27_PF_CSPI1_SS1	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
-- 
cgit v1.1


From 251290a6078cb88382344b3ee535ae8c6254c1b5 Mon Sep 17 00:00:00 2001
From: Andres Salomon <dilinger@queued.net>
Date: Fri, 4 Mar 2011 08:06:53 -0800
Subject: ARM: mx51_efika: update platform data for new mfd changes

Note that this relies on stuff currently in mfd's next tree, but this
is also a newer driver.  I'm not sure which tree it should go through,
as it's a problem that shows up in next.

From: Andres Salomon <dilinger@queued.net>

MFD changes in c738892f cause the mc13xxx_platform_data struct
to change.  This changes one more (new) user of it, fixing a build
error.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx5/mx51_efika.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
index 07aea9c..d0c7075 100644
--- a/arch/arm/mach-mx5/mx51_efika.c
+++ b/arch/arm/mach-mx5/mx51_efika.c
@@ -571,8 +571,10 @@ static struct mc13xxx_regulator_init_data mx51_efika_regulators[] = {
 
 static struct mc13xxx_platform_data mx51_efika_mc13892_data = {
 	.flags = MC13XXX_USE_RTC | MC13XXX_USE_REGULATOR,
-	.num_regulators = ARRAY_SIZE(mx51_efika_regulators),
-	.regulators = mx51_efika_regulators,
+	.regulators = {
+		.num_regulators = ARRAY_SIZE(mx51_efika_regulators),
+		.regulators = mx51_efika_regulators,
+	},
 };
 
 static struct spi_board_info mx51_efika_spi_board_info[] __initdata = {
-- 
cgit v1.1


From 47babe692e90e0333b2448969639b8f0940e3682 Mon Sep 17 00:00:00 2001
From: Shawn Guo <shawn.guo@freescale.com>
Date: Wed, 16 Mar 2011 11:31:06 +0100
Subject: ARM: mxs: dynamically allocate mmc device
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
[ukleinek: fix naming to include complete device name in functions]
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mxs/clock-mx23.c                  | 15 +++++
 arch/arm/mach-mxs/clock-mx28.c                  | 18 ++++++
 arch/arm/mach-mxs/devices-mx23.h                |  4 ++
 arch/arm/mach-mxs/devices-mx28.h                |  4 ++
 arch/arm/mach-mxs/devices/Kconfig               |  3 +
 arch/arm/mach-mxs/devices/Makefile              |  1 +
 arch/arm/mach-mxs/devices/platform-mxs-mmc.c    | 73 +++++++++++++++++++++++++
 arch/arm/mach-mxs/include/mach/devices-common.h | 13 +++++
 8 files changed, 131 insertions(+)
 create mode 100644 arch/arm/mach-mxs/devices/platform-mxs-mmc.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c
index d133c7f..c3577ea 100644
--- a/arch/arm/mach-mxs/clock-mx23.c
+++ b/arch/arm/mach-mxs/clock-mx23.c
@@ -521,6 +521,15 @@ static int clk_misc_init(void)
 	__raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
 			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET);
 
+	/*
+	 * 480 MHz seems too high to be ssp clock source directly,
+	 * so set frac to get a 288 MHz ref_io.
+	 */
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
+	reg &= ~BM_CLKCTRL_FRAC_IOFRAC;
+	reg |= 30 << BP_CLKCTRL_FRAC_IOFRAC;
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
+
 	return 0;
 }
 
@@ -528,6 +537,12 @@ int __init mx23_clocks_init(void)
 {
 	clk_misc_init();
 
+	/*
+	 * source ssp clock from ref_io than ref_xtal,
+	 * as ref_xtal only provides 24 MHz as maximum.
+	 */
+	clk_set_parent(&ssp_clk, &ref_io_clk);
+
 	clk_enable(&cpu_clk);
 	clk_enable(&hbus_clk);
 	clk_enable(&xbus_clk);
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index 5e489a2..1ad97fe 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -618,6 +618,8 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("pll2", NULL, pll2_clk)
 	_REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk)
 	_REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk)
+	_REGISTER_CLOCK("mxs-mmc.0", NULL, ssp0_clk)
+	_REGISTER_CLOCK("mxs-mmc.1", NULL, ssp1_clk)
 	_REGISTER_CLOCK("flexcan.0", NULL, can0_clk)
 	_REGISTER_CLOCK("flexcan.1", NULL, can1_clk)
 	_REGISTER_CLOCK(NULL, "usb0", usb0_clk)
@@ -737,6 +739,15 @@ static int clk_misc_init(void)
 	reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
 	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
 
+	/*
+	 * 480 MHz seems too high to be ssp clock source directly,
+	 * so set frac0 to get a 288 MHz ref_io0.
+	 */
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0);
+	reg &= ~BM_CLKCTRL_FRAC0_IO0FRAC;
+	reg |= 30 << BP_CLKCTRL_FRAC0_IO0FRAC;
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0);
+
 	return 0;
 }
 
@@ -744,6 +755,13 @@ int __init mx28_clocks_init(void)
 {
 	clk_misc_init();
 
+	/*
+	 * source ssp clock from ref_io0 than ref_xtal,
+	 * as ref_xtal only provides 24 MHz as maximum.
+	 */
+	clk_set_parent(&ssp0_clk, &ref_io0_clk);
+	clk_set_parent(&ssp1_clk, &ref_io0_clk);
+
 	clk_enable(&cpu_clk);
 	clk_enable(&hbus_clk);
 	clk_enable(&xbus_clk);
diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h
index c7e14f4..c6f345f 100644
--- a/arch/arm/mach-mxs/devices-mx23.h
+++ b/arch/arm/mach-mxs/devices-mx23.h
@@ -21,6 +21,10 @@ extern const struct mxs_auart_data mx23_auart_data[] __initconst;
 #define mx23_add_auart0()		mx23_add_auart(0)
 #define mx23_add_auart1()		mx23_add_auart(1)
 
+extern const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst;
+#define mx23_add_mxs_mmc(id, pdata) \
+	mxs_add_mxs_mmc(&mx23_mxs_mmc_data[id], pdata)
+
 #define mx23_add_mxs_pwm(id)		mxs_add_mxs_pwm(MX23_PWM_BASE_ADDR, id)
 
 struct platform_device *__init mx23_add_mxsfb(
diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
index 9d08555..c473edd 100644
--- a/arch/arm/mach-mxs/devices-mx28.h
+++ b/arch/arm/mach-mxs/devices-mx28.h
@@ -37,6 +37,10 @@ extern const struct mxs_flexcan_data mx28_flexcan_data[] __initconst;
 extern const struct mxs_i2c_data mx28_mxs_i2c_data[] __initconst;
 #define mx28_add_mxs_i2c(id)		mxs_add_mxs_i2c(&mx28_mxs_i2c_data[id])
 
+extern const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst;
+#define mx28_add_mxs_mmc(id, pdata) \
+	mxs_add_mxs_mmc(&mx28_mxs_mmc_data[id], pdata)
+
 #define mx28_add_mxs_pwm(id)		mxs_add_mxs_pwm(MX28_PWM_BASE_ADDR, id)
 
 struct platform_device *__init mx28_add_mxsfb(
diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig
index 1451ad06..acf9eea 100644
--- a/arch/arm/mach-mxs/devices/Kconfig
+++ b/arch/arm/mach-mxs/devices/Kconfig
@@ -15,6 +15,9 @@ config MXS_HAVE_PLATFORM_FLEXCAN
 config MXS_HAVE_PLATFORM_MXS_I2C
 	bool
 
+config MXS_HAVE_PLATFORM_MXS_MMC
+	bool
+
 config MXS_HAVE_PLATFORM_MXS_PWM
 	bool
 
diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile
index 0d9bea3..324f282 100644
--- a/arch/arm/mach-mxs/devices/Makefile
+++ b/arch/arm/mach-mxs/devices/Makefile
@@ -4,5 +4,6 @@ obj-y += platform-dma.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-mmc.c b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c
new file mode 100644
index 0000000..382dacb
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <linux/compiler.h>
+#include <linux/err.h>
+#include <linux/init.h>
+
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+#define mxs_mxs_mmc_data_entry_single(soc, _id, hwid)			\
+	{								\
+		.id = _id,						\
+		.iobase = soc ## _SSP ## hwid ## _BASE_ADDR,		\
+		.dma = soc ## _DMA_SSP ## hwid,				\
+		.irq_err = soc ## _INT_SSP ## hwid ## _ERROR,		\
+		.irq_dma = soc ## _INT_SSP ## hwid ## _DMA,		\
+	}
+
+#define mxs_mxs_mmc_data_entry(soc, _id, hwid)				\
+	[_id] = mxs_mxs_mmc_data_entry_single(soc, _id, hwid)
+
+
+#ifdef CONFIG_SOC_IMX23
+const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst = {
+	mxs_mxs_mmc_data_entry(MX23, 0, 1),
+	mxs_mxs_mmc_data_entry(MX23, 1, 2),
+};
+#endif
+
+#ifdef CONFIG_SOC_IMX28
+const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst = {
+	mxs_mxs_mmc_data_entry(MX28, 0, 0),
+	mxs_mxs_mmc_data_entry(MX28, 1, 1),
+};
+#endif
+
+struct platform_device *__init mxs_add_mxs_mmc(
+		const struct mxs_mxs_mmc_data *data,
+		const struct mxs_mmc_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start	= data->iobase,
+			.end	= data->iobase + SZ_8K - 1,
+			.flags	= IORESOURCE_MEM,
+		}, {
+			.start	= data->dma,
+			.end	= data->dma,
+			.flags	= IORESOURCE_DMA,
+		}, {
+			.start	= data->irq_err,
+			.end	= data->irq_err,
+			.flags	= IORESOURCE_IRQ,
+		}, {
+			.start	= data->irq_dma,
+			.end	= data->irq_dma,
+			.flags	= IORESOURCE_IRQ,
+		},
+	};
+
+	return mxs_add_platform_device("mxs-mmc", data->id,
+			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
index 71f2448..c5137f1 100644
--- a/arch/arm/mach-mxs/include/mach/devices-common.h
+++ b/arch/arm/mach-mxs/include/mach/devices-common.h
@@ -73,6 +73,19 @@ struct mxs_i2c_data {
 };
 struct platform_device * __init mxs_add_mxs_i2c(const struct mxs_i2c_data *data);
 
+/* mmc */
+#include <mach/mmc.h>
+struct mxs_mxs_mmc_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t dma;
+	resource_size_t irq_err;
+	resource_size_t irq_dma;
+};
+struct platform_device *__init mxs_add_mxs_mmc(
+		const struct mxs_mxs_mmc_data *data,
+		const struct mxs_mmc_platform_data *pdata);
+
 /* pwm */
 struct platform_device *__init mxs_add_mxs_pwm(
 		resource_size_t iobase, int id);
-- 
cgit v1.1


From 1b6f1e885ef08c6fda87979a2ca05e910d479985 Mon Sep 17 00:00:00 2001
From: Shawn Guo <shawn.guo@freescale.com>
Date: Tue, 22 Feb 2011 16:49:19 +0800
Subject: ARM: mxs/mx23evk: add mmc device

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
[sha: updated to Uwes v4 version]
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mxs/Kconfig        |  1 +
 arch/arm/mach-mxs/mach-mx23evk.c | 44 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 45 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 4f6f174..9e81526 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -22,6 +22,7 @@ config MACH_MX23EVK
 	select SOC_IMX23
 	select MXS_HAVE_AMBA_DUART
 	select MXS_HAVE_PLATFORM_AUART
+	select MXS_HAVE_PLATFORM_MXS_MMC
 	select MXS_HAVE_PLATFORM_MXSFB
 	default y
 	help
diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c
index a66994f..214e5b6 100644
--- a/arch/arm/mach-mxs/mach-mx23evk.c
+++ b/arch/arm/mach-mxs/mach-mx23evk.c
@@ -28,6 +28,8 @@
 
 #define MX23EVK_LCD_ENABLE	MXS_GPIO_NR(1, 18)
 #define MX23EVK_BL_ENABLE	MXS_GPIO_NR(1, 28)
+#define MX23EVK_MMC0_WRITE_PROTECT	MXS_GPIO_NR(1, 30)
+#define MX23EVK_MMC0_SLOT_POWER		MXS_GPIO_NR(1, 29)
 
 static const iomux_cfg_t mx23evk_pads[] __initconst = {
 	/* duart */
@@ -73,6 +75,36 @@ static const iomux_cfg_t mx23evk_pads[] __initconst = {
 	MX23_PAD_LCD_RESET__GPIO_1_18 | MXS_PAD_CTRL,
 	/* backlight control */
 	MX23_PAD_PWM2__GPIO_1_28 | MXS_PAD_CTRL,
+
+	/* mmc */
+	MX23_PAD_SSP1_DATA0__SSP1_DATA0 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX23_PAD_SSP1_DATA1__SSP1_DATA1 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX23_PAD_SSP1_DATA2__SSP1_DATA2 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX23_PAD_SSP1_DATA3__SSP1_DATA3 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX23_PAD_GPMI_D08__SSP1_DATA4 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX23_PAD_GPMI_D09__SSP1_DATA5 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX23_PAD_GPMI_D10__SSP1_DATA6 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX23_PAD_GPMI_D11__SSP1_DATA7 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX23_PAD_SSP1_CMD__SSP1_CMD |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX23_PAD_SSP1_DETECT__SSP1_DETECT |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	MX23_PAD_SSP1_SCK__SSP1_SCK |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	/* write protect */
+	MX23_PAD_PWM4__GPIO_1_30 |
+		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	/* slot power enable */
+	MX23_PAD_PWM3__GPIO_1_29 |
+		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
 };
 
 /* mxsfb (lcdif) */
@@ -101,6 +133,11 @@ static const struct mxsfb_platform_data mx23evk_mxsfb_pdata __initconst = {
 	.ld_intf_width	= STMLCDIF_24BIT,
 };
 
+static struct mxs_mmc_platform_data mx23evk_mmc_pdata __initdata = {
+	.wp_gpio = MX23EVK_MMC0_WRITE_PROTECT,
+	.flags = SLOTF_8_BIT_CAPABLE,
+};
+
 static void __init mx23evk_init(void)
 {
 	int ret;
@@ -110,6 +147,13 @@ static void __init mx23evk_init(void)
 	mx23_add_duart();
 	mx23_add_auart0();
 
+	/* power on mmc slot by writing 0 to the gpio */
+	ret = gpio_request_one(MX23EVK_MMC0_SLOT_POWER, GPIOF_DIR_OUT,
+			       "mmc0-slot-power");
+	if (ret)
+		pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
+	mx23_add_mxs_mmc(0, &mx23evk_mmc_pdata);
+
 	ret = gpio_request_one(MX23EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable");
 	if (ret)
 		pr_warn("failed to request gpio lcd-enable: %d\n", ret);
-- 
cgit v1.1


From 5bb2c828420992357cfe66ceb6f4c3d4121ae1ce Mon Sep 17 00:00:00 2001
From: Shawn Guo <shawn.guo@freescale.com>
Date: Tue, 22 Feb 2011 16:50:24 +0800
Subject: ARM: mxs/mx28evk: add mmc device

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
[sha: updated to Uwes v4 version]
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mxs/Kconfig        |  1 +
 arch/arm/mach-mxs/mach-mx28evk.c | 89 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 90 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 9e81526..4522fbb 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -36,6 +36,7 @@ config MACH_MX28EVK
 	select MXS_HAVE_PLATFORM_AUART
 	select MXS_HAVE_PLATFORM_FEC
 	select MXS_HAVE_PLATFORM_FLEXCAN
+	select MXS_HAVE_PLATFORM_MXS_MMC
 	select MXS_HAVE_PLATFORM_MXSFB
 	select MXS_OCOTP
 	default y
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index 08002d0..bb329b9 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -34,6 +34,11 @@
 #define MX28EVK_LCD_ENABLE	MXS_GPIO_NR(3, 30)
 #define MX28EVK_FEC_PHY_RESET	MXS_GPIO_NR(4, 13)
 
+#define MX28EVK_MMC0_WRITE_PROTECT	MXS_GPIO_NR(2, 12)
+#define MX28EVK_MMC1_WRITE_PROTECT	MXS_GPIO_NR(0, 28)
+#define MX28EVK_MMC0_SLOT_POWER		MXS_GPIO_NR(3, 28)
+#define MX28EVK_MMC1_SLOT_POWER		MXS_GPIO_NR(3, 29)
+
 static const iomux_cfg_t mx28evk_pads[] __initconst = {
 	/* duart */
 	MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
@@ -115,6 +120,65 @@ static const iomux_cfg_t mx28evk_pads[] __initconst = {
 	MX28_PAD_LCD_RESET__GPIO_3_30 | MXS_PAD_CTRL,
 	/* backlight control */
 	MX28_PAD_PWM2__GPIO_3_18 | MXS_PAD_CTRL,
+	/* mmc0 */
+	MX28_PAD_SSP0_DATA0__SSP0_D0 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA1__SSP0_D1 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA2__SSP0_D2 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA3__SSP0_D3 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA4__SSP0_D4 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA5__SSP0_D5 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA6__SSP0_D6 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA7__SSP0_D7 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_CMD__SSP0_CMD |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	MX28_PAD_SSP0_SCK__SSP0_SCK |
+		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	/* write protect */
+	MX28_PAD_SSP1_SCK__GPIO_2_12 |
+		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	/* slot power enable */
+	MX28_PAD_PWM3__GPIO_3_28 |
+		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+
+	/* mmc1 */
+	MX28_PAD_GPMI_D00__SSP1_D0 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D01__SSP1_D1 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D02__SSP1_D2 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D03__SSP1_D3 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D04__SSP1_D4 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D05__SSP1_D5 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D06__SSP1_D6 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D07__SSP1_D7 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_RDY1__SSP1_CMD |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_WRN__SSP1_SCK |
+		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	/* write protect */
+	MX28_PAD_GPMI_RESETN__GPIO_0_28 |
+		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	/* slot power enable */
+	MX28_PAD_PWM4__GPIO_3_29 |
+		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
 };
 
 /* fec */
@@ -258,6 +322,18 @@ static const struct mxsfb_platform_data mx28evk_mxsfb_pdata __initconst = {
 	.ld_intf_width	= STMLCDIF_24BIT,
 };
 
+static struct mxs_mmc_platform_data mx28evk_mmc_pdata[] __initdata = {
+	{
+		/* mmc0 */
+		.wp_gpio = MX28EVK_MMC0_WRITE_PROTECT,
+		.flags = SLOTF_8_BIT_CAPABLE,
+	}, {
+		/* mmc1 */
+		.wp_gpio = MX28EVK_MMC1_WRITE_PROTECT,
+		.flags = SLOTF_8_BIT_CAPABLE,
+	},
+};
+
 static void __init mx28evk_init(void)
 {
 	int ret;
@@ -297,6 +373,19 @@ static void __init mx28evk_init(void)
 		gpio_set_value(MX28EVK_BL_ENABLE, 1);
 
 	mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
+
+	/* power on mmc slot by writing 0 to the gpio */
+	ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_DIR_OUT,
+			       "mmc0-slot-power");
+	if (ret)
+		pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
+	mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
+
+	ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_DIR_OUT,
+			       "mmc1-slot-power");
+	if (ret)
+		pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret);
+	mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
 }
 
 static void __init mx28evk_timer_init(void)
-- 
cgit v1.1


From da8db3aab55142ad39061e6b0db1e7b065eac61a Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Eric=20B=C3=A9nard?= <eric@eukrea.com>
Date: Fri, 25 Feb 2011 13:49:57 +0100
Subject: mx3/eukrea_mbimxsd-baseboard: fix gpio request
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

without this patch, we get :
------------[ cut here ]------------
WARNING: at drivers/gpio/gpiolib.c:99 gpio_ensure_requested+0x4c/0x104()
autorequest GPIO-4
.../...
[<c01bcfb0>] (platform_lcd_set_power+0x34/0x40) from [<c033954c>] (platform_lcd_probe+0xb8/0xd8)

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
index 8076147..3f67eb6 100644
--- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
@@ -167,7 +167,7 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 
 #define GPIO_LED1	IMX_GPIO_NR(3, 29)
 #define GPIO_SWITCH1	IMX_GPIO_NR(3, 25)
-#define GPIO_LCDPWR	(4)
+#define GPIO_LCDPWR	IMX_GPIO_NR(1, 4)
 
 static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
 				   unsigned int power)
@@ -301,7 +301,6 @@ void __init eukrea_mbimxsd35_baseboard_init(void)
 
 	gpio_request(GPIO_LCDPWR, "LCDPWR");
 	gpio_direction_output(GPIO_LCDPWR, 1);
-	gpio_free(GPIO_LCDPWR);
 
 	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
 				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
-- 
cgit v1.1


From d335cf97060c44e9beb2a25151b5fba8740e1929 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Eric=20B=C3=A9nard?= <eric@eukrea.com>
Date: Fri, 25 Feb 2011 13:49:58 +0100
Subject: mx3/eukrea_mbimxsd-baseboard: add SD card detect support
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Eric Bénard <eric@eukrea.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
index 3f67eb6..2e288b3 100644
--- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
@@ -43,6 +43,7 @@
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
 #include <mach/audmux.h>
+#include <mach/esdhc.h>
 
 #include "devices-imx35.h"
 #include "devices.h"
@@ -163,11 +164,14 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
 	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
 	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
+	/* SD1 CD */
+	MX35_PAD_LD18__GPIO3_24,
 };
 
 #define GPIO_LED1	IMX_GPIO_NR(3, 29)
 #define GPIO_SWITCH1	IMX_GPIO_NR(3, 25)
 #define GPIO_LCDPWR	IMX_GPIO_NR(1, 4)
+#define GPIO_SD1CD	IMX_GPIO_NR(3, 24)
 
 static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
 				   unsigned int power)
@@ -254,6 +258,11 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
 	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
 };
 
+static struct esdhc_platform_data sd1_pdata = {
+	.cd_gpio = GPIO_SD1CD,
+	.wp_gpio = -EINVAL,
+};
+
 /*
  * system init for baseboard usage. Will be called by cpuimx35 init.
  *
@@ -289,7 +298,7 @@ void __init eukrea_mbimxsd35_baseboard_init(void)
 	imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
 
 	imx35_add_flexcan1(NULL);
-	imx35_add_sdhci_esdhc_imx(0, NULL);
+	imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
 
 	gpio_request(GPIO_LED1, "LED1");
 	gpio_direction_output(GPIO_LED1, 1);
-- 
cgit v1.1


From 01ea9aeae84536e2afe769be69b994de9f7ceed7 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Eric=20B=C3=A9nard?= <eric@eukrea.com>
Date: Fri, 25 Feb 2011 13:49:14 +0100
Subject: eukrea_mbimxsd25-baseboard: add SD card detect
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Eric Bénard <eric@eukrea.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
index cb705c2..6269053 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
@@ -34,6 +34,7 @@
 #include <mach/mx25.h>
 #include <mach/imx-uart.h>
 #include <mach/audmux.h>
+#include <mach/esdhc.h>
 
 #include "devices-imx25.h"
 
@@ -242,6 +243,11 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
 	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
 };
 
+static struct esdhc_platform_data sd1_pdata = {
+	.cd_gpio = GPIO_SD1CD,
+	.wp_gpio = -EINVAL,
+};
+
 /*
  * system init for baseboard usage. Will be called by cpuimx25 init.
  *
@@ -275,7 +281,7 @@ void __init eukrea_mbimxsd25_baseboard_init(void)
 	imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
 
 	imx25_add_flexcan1(NULL);
-	imx25_add_sdhci_esdhc_imx(0, NULL);
+	imx25_add_sdhci_esdhc_imx(0, &sd1_pdata);
 
 	gpio_request(GPIO_LED1, "LED1");
 	gpio_direction_output(GPIO_LED1, 1);
-- 
cgit v1.1


From ef560bfe01eff692a307b7d73e60625ccdf05d87 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Eric=20B=C3=A9nard?= <eric@eukrea.com>
Date: Fri, 25 Feb 2011 14:38:31 +0100
Subject: eukrea_mbimxsd51: add SD Card detect
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
index c372a43..e6c1119 100644
--- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
@@ -67,6 +67,10 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 	MX51_PAD_SD1_DATA1__SD1_DATA1,
 	MX51_PAD_SD1_DATA2__SD1_DATA2,
 	MX51_PAD_SD1_DATA3__SD1_DATA3,
+	/* SD1 CD */
+	_MX51_PAD_GPIO1_0__SD1_CD | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
+			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
 };
 
 #define GPIO_LED1	IMX_GPIO_NR(3, 30)
-- 
cgit v1.1


From a10aabd5e313ec6481569be20d120191692b4ca6 Mon Sep 17 00:00:00 2001
From: Wolfram Sang <w.sang@pengutronix.de>
Date: Wed, 23 Feb 2011 14:51:57 +0100
Subject: arm: mach-mx3: pcm043: add write-protect and card-detect for SD1

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mach-pcm043.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index b3ecfb2..036ba1a 100644
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -40,6 +40,7 @@
 #include <mach/mx3fb.h>
 #include <mach/ulpi.h>
 #include <mach/audmux.h>
+#include <mach/esdhc.h>
 
 #include "devices-imx35.h"
 #include "devices.h"
@@ -217,11 +218,15 @@ static iomux_v3_cfg_t pcm043_pads[] = {
 	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
 	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
 	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
+	MX35_PAD_ATA_DATA10__GPIO2_23, /* WriteProtect */
+	MX35_PAD_ATA_DATA11__GPIO2_24, /* CardDetect */
 };
 
 #define AC97_GPIO_TXFS	IMX_GPIO_NR(2, 31)
 #define AC97_GPIO_TXD	IMX_GPIO_NR(2, 28)
 #define AC97_GPIO_RESET	IMX_GPIO_NR(2, 0)
+#define SD1_GPIO_WP	IMX_GPIO_NR(2, 23)
+#define SD1_GPIO_CD	IMX_GPIO_NR(2, 24)
 
 static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
 {
@@ -346,6 +351,11 @@ static int __init pcm043_otg_mode(char *options)
 }
 __setup("otg_mode=", pcm043_otg_mode);
 
+static struct esdhc_platform_data sd1_pdata = {
+	.wp_gpio = SD1_GPIO_WP,
+	.cd_gpio = SD1_GPIO_CD,
+};
+
 /*
  * Board specific initialization.
  */
@@ -395,7 +405,7 @@ static void __init pcm043_init(void)
 		imx35_add_fsl_usb2_udc(&otg_device_pdata);
 
 	imx35_add_flexcan1(NULL);
-	imx35_add_sdhci_esdhc_imx(0, NULL);
+	imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
 }
 
 static void __init pcm043_timer_init(void)
-- 
cgit v1.1


From 0efc48ecaf0f84430524a1759ab9c60aad8eab1e Mon Sep 17 00:00:00 2001
From: Pawel Moll <pawel.moll@arm.com>
Date: Thu, 17 Mar 2011 13:10:22 +0100
Subject: ARM: 6807/1: realview: Fix secondary GIC initialisation for EB with
 MPCore tile

The second GIC, present when EB board is used with a MPCore tile,
was initialised starting with irq number 64, which made interrupts
64-95 in the primary GIC unusable.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-realview/realview_eb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 2ecc1d9..10e75fa 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -348,7 +348,7 @@ static void __init gic_init_irq(void)
 
 #ifndef CONFIG_REALVIEW_EB_ARM11MP_REVB
 		/* board GIC, secondary */
-		gic_init(1, 64, __io_address(REALVIEW_EB_GIC_DIST_BASE),
+		gic_init(1, 96, __io_address(REALVIEW_EB_GIC_DIST_BASE),
 			 __io_address(REALVIEW_EB_GIC_CPU_BASE));
 		gic_cascade_irq(1, IRQ_EB11MP_EB_IRQ1);
 #endif
-- 
cgit v1.1


From fb4fe87d79511398a68000d2100c825f54b51652 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nicolas.pitre@linaro.org>
Date: Tue, 22 Mar 2011 19:09:14 +0100
Subject: ARM: 6825/1: kernel/sleep.S: fix Thumb2 compilation issues

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Reviewed-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/sleep.S | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
index bfad698..6398ead 100644
--- a/arch/arm/kernel/sleep.S
+++ b/arch/arm/kernel/sleep.S
@@ -119,11 +119,19 @@ ENTRY(cpu_resume)
 #else
 	ldr	r0, sleep_save_sp	@ stack phys addr
 #endif
-	msr	cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE @ set SVC, irqs off
+	setmode	PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1  @ set SVC, irqs off
 #ifdef MULTI_CPU
-	ldmia	r0!, {r1, sp, lr, pc}	@ load v:p, stack, return fn, resume fn
+	@ load v:p, stack, return fn, resume fn
+  ARM(	ldmia	r0!, {r1, sp, lr, pc}	)
+THUMB(	ldmia	r0!, {r1, r2, r3, r4}	)
+THUMB(	mov	sp, r2			)
+THUMB(	mov	lr, r3			)
+THUMB(	bx	r4			)
 #else
-	ldmia	r0!, {r1, sp, lr}	@ load v:p, stack, return fn
+	@ load v:p, stack, return fn
+  ARM(	ldmia	r0!, {r1, sp, lr}	)
+THUMB(	ldmia	r0!, {r1, r2, lr}	)
+THUMB(	mov	sp, r2			)
 	b	cpu_do_resume
 #endif
 ENDPROC(cpu_resume)
-- 
cgit v1.1


From d25d3b4c4d0e27975ee659a64b6d29f02fdbfde4 Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Fri, 25 Mar 2011 13:12:23 +0100
Subject: ARM: 6833/1: perf: add required isbs() to ARMv7 backend

The ARMv7 architecture does not guarantee that effects from co-processor
writes are immediately visible to following instructions.

This patch adds two isbs to the ARMv7 perf code:

(1) Immediately after selecting an event register, so that the PMU state
    following this instruction is consistent with the new event.

(2) Immediately before writing to the PMCR, so that any previous writes
    to the PMU have taken effect before (typically) enabling the
    counters.

Acked-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/perf_event_v7.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 2e14025..d6c9dcd 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -466,6 +466,7 @@ static inline unsigned long armv7_pmnc_read(void)
 static inline void armv7_pmnc_write(unsigned long val)
 {
 	val &= ARMV7_PMNC_MASK;
+	isb();
 	asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val));
 }
 
@@ -502,6 +503,7 @@ static inline int armv7_pmnc_select_counter(unsigned int idx)
 
 	val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK;
 	asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
+	isb();
 
 	return idx;
 }
-- 
cgit v1.1


From 574b69cbb633037a9c305d2993aeb680f4a8badd Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Fri, 25 Mar 2011 13:13:34 +0100
Subject: ARM: 6834/1: perf: reset counters on all CPUs during initialisation

ARMv7 dictates that the interrupt-enable and count-enable registers for
each PMU counter are UNKNOWN following core reset.

This patch adds a new (optional) function pointer to struct arm_pmu for
resetting the PMU state during init. The reset function is called on
each CPU via an arch_initcall in the generic ARM perf_event code and
allows the PMU backend to write sane values to any UNKNOWN registers.

Acked-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/perf_event.c    | 14 ++++++++++++++
 arch/arm/kernel/perf_event_v7.c | 22 ++++++++++++++++------
 2 files changed, 30 insertions(+), 6 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 22e194eb..e422f4c 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -79,6 +79,7 @@ struct arm_pmu {
 	void		(*write_counter)(int idx, u32 val);
 	void		(*start)(void);
 	void		(*stop)(void);
+	void		(*reset)(void *);
 	const unsigned	(*cache_map)[PERF_COUNT_HW_CACHE_MAX]
 				    [PERF_COUNT_HW_CACHE_OP_MAX]
 				    [PERF_COUNT_HW_CACHE_RESULT_MAX];
@@ -624,6 +625,19 @@ static struct pmu pmu = {
 #include "perf_event_v6.c"
 #include "perf_event_v7.c"
 
+/*
+ * Ensure the PMU has sane values out of reset.
+ * This requires SMP to be available, so exists as a separate initcall.
+ */
+static int __init
+armpmu_reset(void)
+{
+	if (armpmu && armpmu->reset)
+		return on_each_cpu(armpmu->reset, NULL, 1);
+	return 0;
+}
+arch_initcall(armpmu_reset);
+
 static int __init
 init_hw_perf_events(void)
 {
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index d6c9dcd..c08d07a 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -849,6 +849,18 @@ static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc,
 	}
 }
 
+static void armv7pmu_reset(void *info)
+{
+	u32 idx, nb_cnt = armpmu->num_events;
+
+	/* The counter and interrupt enable registers are unknown at reset. */
+	for (idx = 1; idx < nb_cnt; ++idx)
+		armv7pmu_disable_event(NULL, idx);
+
+	/* Initialize & Reset PMNC: C and P bits */
+	armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
+}
+
 static struct arm_pmu armv7pmu = {
 	.handle_irq		= armv7pmu_handle_irq,
 	.enable			= armv7pmu_enable_event,
@@ -858,17 +870,15 @@ static struct arm_pmu armv7pmu = {
 	.get_event_idx		= armv7pmu_get_event_idx,
 	.start			= armv7pmu_start,
 	.stop			= armv7pmu_stop,
+	.reset			= armv7pmu_reset,
 	.raw_event_mask		= 0xFF,
 	.max_period		= (1LLU << 32) - 1,
 };
 
-static u32 __init armv7_reset_read_pmnc(void)
+static u32 __init armv7_read_num_pmnc_events(void)
 {
 	u32 nb_cnt;
 
-	/* Initialize & Reset PMNC: C and P bits */
-	armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
-
 	/* Read the nb of CNTx counters supported from PMNC */
 	nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK;
 
@@ -882,7 +892,7 @@ static const struct arm_pmu *__init armv7_a8_pmu_init(void)
 	armv7pmu.name		= "ARMv7 Cortex-A8";
 	armv7pmu.cache_map	= &armv7_a8_perf_cache_map;
 	armv7pmu.event_map	= &armv7_a8_perf_map;
-	armv7pmu.num_events	= armv7_reset_read_pmnc();
+	armv7pmu.num_events	= armv7_read_num_pmnc_events();
 	return &armv7pmu;
 }
 
@@ -892,7 +902,7 @@ static const struct arm_pmu *__init armv7_a9_pmu_init(void)
 	armv7pmu.name		= "ARMv7 Cortex-A9";
 	armv7pmu.cache_map	= &armv7_a9_perf_cache_map;
 	armv7pmu.event_map	= &armv7_a9_perf_map;
-	armv7pmu.num_events	= armv7_reset_read_pmnc();
+	armv7pmu.num_events	= armv7_read_num_pmnc_events();
 	return &armv7pmu;
 }
 #else
-- 
cgit v1.1


From a737823d37666255e3e74ce84bc9611a038e0888 Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Fri, 25 Mar 2011 17:12:37 +0100
Subject: ARM: 6835/1: perf: ensure overflows aren't missed due to IRQ latency

If a counter overflows during a perf stat profiling run it may overtake
the last known value of the counter:

    0        prev     new                0xffffffff
    |----------|-------|----------------------|

In this case, the number of events that have occurred is
(0xffffffff - prev) + new. Unfortunately, the event update code will
not realise an overflow has occurred and will instead report the event
delta as (new - prev) which may be considerably smaller than the real
count.

This patch adds an extra argument to armpmu_event_update which indicates
whether or not an overflow has occurred. If an overflow has occurred
then we use the maximum period of the counter to calculate the elapsed
events.

Acked-by: Jamie Iles <jamie@jamieiles.com>
Reported-by: Ashwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/perf_event.c        | 19 +++++++++++--------
 arch/arm/kernel/perf_event_v6.c     |  2 +-
 arch/arm/kernel/perf_event_v7.c     |  2 +-
 arch/arm/kernel/perf_event_xscale.c |  4 ++--
 4 files changed, 15 insertions(+), 12 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index e422f4c..69cfee0 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -205,11 +205,9 @@ armpmu_event_set_period(struct perf_event *event,
 static u64
 armpmu_event_update(struct perf_event *event,
 		    struct hw_perf_event *hwc,
-		    int idx)
+		    int idx, int overflow)
 {
-	int shift = 64 - 32;
-	s64 prev_raw_count, new_raw_count;
-	u64 delta;
+	u64 delta, prev_raw_count, new_raw_count;
 
 again:
 	prev_raw_count = local64_read(&hwc->prev_count);
@@ -219,8 +217,13 @@ again:
 			     new_raw_count) != prev_raw_count)
 		goto again;
 
-	delta = (new_raw_count << shift) - (prev_raw_count << shift);
-	delta >>= shift;
+	new_raw_count &= armpmu->max_period;
+	prev_raw_count &= armpmu->max_period;
+
+	if (overflow)
+		delta = armpmu->max_period - prev_raw_count + new_raw_count;
+	else
+		delta = new_raw_count - prev_raw_count;
 
 	local64_add(delta, &event->count);
 	local64_sub(delta, &hwc->period_left);
@@ -237,7 +240,7 @@ armpmu_read(struct perf_event *event)
 	if (hwc->idx < 0)
 		return;
 
-	armpmu_event_update(event, hwc, hwc->idx);
+	armpmu_event_update(event, hwc, hwc->idx, 0);
 }
 
 static void
@@ -255,7 +258,7 @@ armpmu_stop(struct perf_event *event, int flags)
 	if (!(hwc->state & PERF_HES_STOPPED)) {
 		armpmu->disable(hwc, hwc->idx);
 		barrier(); /* why? */
-		armpmu_event_update(event, hwc, hwc->idx);
+		armpmu_event_update(event, hwc, hwc->idx, 0);
 		hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
 	}
 }
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
index 6fc2d22..f1e8dd9 100644
--- a/arch/arm/kernel/perf_event_v6.c
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -474,7 +474,7 @@ armv6pmu_handle_irq(int irq_num,
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx);
+		armpmu_event_update(event, hwc, idx, 1);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index c08d07a..4960686 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -782,7 +782,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx);
+		armpmu_event_update(event, hwc, idx, 1);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c
index 28cd3b0..39affbe 100644
--- a/arch/arm/kernel/perf_event_xscale.c
+++ b/arch/arm/kernel/perf_event_xscale.c
@@ -246,7 +246,7 @@ xscale1pmu_handle_irq(int irq_num, void *dev)
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx);
+		armpmu_event_update(event, hwc, idx, 1);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
@@ -578,7 +578,7 @@ xscale2pmu_handle_irq(int irq_num, void *dev)
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx);
+		armpmu_event_update(event, hwc, idx, 1);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
-- 
cgit v1.1


From dc7b602dd481cad61fc4f18874bbdc5b04b5ee3e Mon Sep 17 00:00:00 2001
From: Konstantin Porotchkin <kostap@marvell.com>
Date: Sun, 27 Mar 2011 11:54:49 +0200
Subject: Fix the broken build for Marvell Dove platform.

Remove call to the old GPIO init function.
Fix old MPP control offset value.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Acked-by: Saeed Bishara <saeed.bishara@gmail.com>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
---
 arch/arm/mach-dove/include/mach/dove.h | 2 +-
 arch/arm/mach-dove/mpp.c               | 3 ---
 2 files changed, 1 insertion(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
index e5fcdd3..b20ec9a 100644
--- a/arch/arm/mach-dove/include/mach/dove.h
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -136,7 +136,7 @@
 #define DOVE_MPP_GENERAL_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe803c)
 #define  DOVE_AU1_SPDIFO_GPIO_EN	(1 << 1)
 #define  DOVE_NAND_GPIO_EN		(1 << 0)
-#define DOVE_MPP_CTRL4_VIRT_BASE	(DOVE_GPIO_VIRT_BASE + 0x40)
+#define DOVE_MPP_CTRL4_VIRT_BASE	(DOVE_GPIO_LO_VIRT_BASE + 0x40)
 #define  DOVE_SPI_GPIO_SEL		(1 << 5)
 #define  DOVE_UART1_GPIO_SEL		(1 << 4)
 #define  DOVE_AU1_GPIO_SEL		(1 << 3)
diff --git a/arch/arm/mach-dove/mpp.c b/arch/arm/mach-dove/mpp.c
index 71db2bd..c66c763 100644
--- a/arch/arm/mach-dove/mpp.c
+++ b/arch/arm/mach-dove/mpp.c
@@ -147,9 +147,6 @@ void __init dove_mpp_conf(unsigned int *mpp_list)
 	u32 pmu_sig_ctrl[PMU_SIG_REGS];
 	int i;
 
-	/* Initialize gpiolib. */
-	orion_gpio_init();
-
 	for (i = 0; i < MPP_NR_REGS; i++)
 		mpp_ctrl[i] = readl(MPP_CTRL(i));
 
-- 
cgit v1.1


From 0652f067360fc3be2c3e668085f5fb2b76402928 Mon Sep 17 00:00:00 2001
From: Viktor Rosendahl <viktor.rosendahl@nokia.com>
Date: Sat, 26 Mar 2011 18:11:01 +0100
Subject: ARM: 6836/1: kprobes/fix emulation of LDR/STR instruction when Rn ==
 PC

The Rn value from the emulation is unconditionally written back;
this is fine as long as Rn != PC because in that case, even if the
instruction isn't a write back instruction, it will only result in the
same value being written back.

In case Rn == PC, then the emulated instruction doesn't have the
actual PC value in Rn but an adjusted value; when this is written
back, it will result in the PC being incorrectly updated.

An altenative solution would be to check bits 24 and 22 to see whether
the instruction actually is a write back instruction or not. I think
it's enough to check whether Rn != PC,  because:
- it's looks cheaper than the alternative
- to my understaning it's not permitted to update the PC with a write
back instruction, so we don't lose any ability to emulate legal
instructions.
- in case of writing back for non write back instructions where Rn != PC, it doesn't matter because the values are the same.

Regarding the second point above, it would possibly be prudent to add
some checking to prep_emulate_ldr_str(), so that instructions with
both write back and Rn == PC would be rejected.

Signed-off-by: Viktor Rosendahl <viktor.rosendahl@nokia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/kprobes-decode.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c
index 8f6ed43..2389131 100644
--- a/arch/arm/kernel/kprobes-decode.c
+++ b/arch/arm/kernel/kprobes-decode.c
@@ -594,7 +594,8 @@ static void __kprobes emulate_ldr(struct kprobe *p, struct pt_regs *regs)
 	long cpsr = regs->ARM_cpsr;
 
 	fnr.dr = insnslot_llret_3arg_rflags(rnv, 0, rmv, cpsr, i_fn);
-	regs->uregs[rn] = fnr.r0;  /* Save Rn in case of writeback. */
+	if (rn != 15)
+		regs->uregs[rn] = fnr.r0;  /* Save Rn in case of writeback. */
 	rdv = fnr.r1;
 
 	if (rd == 15) {
@@ -622,10 +623,11 @@ static void __kprobes emulate_str(struct kprobe *p, struct pt_regs *regs)
 	long rdv = (rd == 15) ? iaddr + str_pc_offset : regs->uregs[rd];
 	long rnv = (rn == 15) ? iaddr +  8 : regs->uregs[rn];
 	long rmv = regs->uregs[rm];  /* rm/rmv may be invalid, don't care. */
+	long rnv_wb;
 
-	/* Save Rn in case of writeback. */
-	regs->uregs[rn] =
-		insnslot_3arg_rflags(rnv, rdv, rmv, regs->ARM_cpsr, i_fn);
+	rnv_wb = insnslot_3arg_rflags(rnv, rdv, rmv, regs->ARM_cpsr, i_fn);
+	if (rn != 15)
+		regs->uregs[rn] = rnv_wb;  /* Save Rn in case of writeback. */
 }
 
 static void __kprobes emulate_mrrc(struct kprobe *p, struct pt_regs *regs)
-- 
cgit v1.1


From 7f479c64a52094354c10309fcacaa71de015dc9e Mon Sep 17 00:00:00 2001
From: Colin Cross <ccross@android.com>
Date: Sun, 27 Mar 2011 00:45:25 +0100
Subject: ARM: 6837/1: remove unused pci_fixup_prpmc1100

The PrPMC1100 machine was removed in 2.6.11, but left a reference to machine_is_prpmc1100 in arch/arm/kernel/bios32.c.  6f82f4db80189281a8ac42f2e72396accb719b57 removed the machine type, which causes a build failure:

CC      arch/arm/kernel/bios32.o
arch/arm/kernel/bios32.c: In function 'pci_fixup_prpmc1100':
arch/arm/kernel/bios32.c:174: error: implicit declaration of function 'machine_is_prpmc1100'

Remove the unused pci_fixup_prpcm1100.

Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/bios32.c | 25 -------------------------
 1 file changed, 25 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index d86fcd4..e4ee050 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -159,31 +159,6 @@ static void __devinit pci_fixup_dec21285(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21285, pci_fixup_dec21285);
 
 /*
- * Same as above. The PrPMC800 carrier board for the PrPMC1100 
- * card maps the host-bridge @ 00:01:00 for some reason and it
- * ends up getting scanned. Note that we only want to do this
- * fixup when we find the IXP4xx on a PrPMC system, which is why
- * we check the machine type. We could be running on a board
- * with an IXP4xx target device and we don't want to kill the
- * resources in that case.
- */
-static void __devinit pci_fixup_prpmc1100(struct pci_dev *dev)
-{
-	int i;
-
-	if (machine_is_prpmc1100()) {
-		dev->class &= 0xff;
-		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
-		for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-			dev->resource[i].start = 0;
-			dev->resource[i].end   = 0;
-			dev->resource[i].flags = 0;
-		}
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IXP4XX, pci_fixup_prpmc1100);
-
-/*
  * PCI IDE controllers use non-standard I/O port decoding, respect it.
  */
 static void __devinit pci_fixup_ide_bases(struct pci_dev *dev)
-- 
cgit v1.1


From 8e8806990cfd91a4ec25df6f00528008c4b0087a Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Mon, 28 Mar 2011 06:10:25 +0100
Subject: ARM: 6838/1: etm: fix section mismatch warning

The patch fixes the warning below:

WARNING: arch/arm/kernel/built-in.o(.data+0x27c): Section mismatch in reference from the variable etb_driver to the function .init.text:etb_probe()
The variable etb_driver references
the function __init etb_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

WARNING: arch/arm/kernel/built-in.o(.data+0x2cc): Section mismatch in reference from the variable etm_driver to the function .init.text:etm_probe()
The variable etm_driver references
the function __init etm_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/etm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c
index 052b509..1bec8b5 100644
--- a/arch/arm/kernel/etm.c
+++ b/arch/arm/kernel/etm.c
@@ -338,7 +338,7 @@ static struct miscdevice etb_miscdev = {
 	.fops = &etb_fops,
 };
 
-static int __init etb_probe(struct amba_device *dev, const struct amba_id *id)
+static int __devinit etb_probe(struct amba_device *dev, const struct amba_id *id)
 {
 	struct tracectx *t = &tracer;
 	int ret = 0;
@@ -530,7 +530,7 @@ static ssize_t trace_mode_store(struct kobject *kobj,
 static struct kobj_attribute trace_mode_attr =
 	__ATTR(trace_mode, 0644, trace_mode_show, trace_mode_store);
 
-static int __init etm_probe(struct amba_device *dev, const struct amba_id *id)
+static int __devinit etm_probe(struct amba_device *dev, const struct amba_id *id)
 {
 	struct tracectx *t = &tracer;
 	int ret = 0;
-- 
cgit v1.1


From dfad549d98b60160547d1b8299051b9456c8da85 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Wed, 23 Mar 2011 22:46:15 +0100
Subject: ARM: 6826/1: Merge v6 and v7 DEBUG_LL DCC support

The inline assembly differences for v6 vs. v7 are purely
optimizations. On a v7 processor, an mrc with the pc sets the
condition codes to the 28-31 bits of the register being read. It
just so happens that the TX/RX full bits the DCC support code is
testing for are high enough in the register to be put into the
condition codes. On a v6 processor, this "feature" isn't
implemented and thus we have to do the usual read, mask, test
operations to check for TX/RX full. Thus, we can drop the v7
implementation and just use the v6 implementation for both.

Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/boot/compressed/head.S | 10 +---------
 arch/arm/boot/compressed/misc.c | 12 +-----------
 arch/arm/kernel/debug.S         | 19 +------------------
 3 files changed, 3 insertions(+), 38 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 84ac4d6..adf583c 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -21,20 +21,12 @@
 
 #if defined(CONFIG_DEBUG_ICEDCC)
 
-#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
 		.macro	loadsp, rb, tmp
 		.endm
 		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c0, c5, 0
 		.endm
-#elif defined(CONFIG_CPU_V7)
-		.macro	loadsp, rb, tmp
-		.endm
-		.macro	writeb, ch, rb
-wait:		mrc	p14, 0, pc, c0, c1, 0
-		bcs	wait
-		mcr	p14, 0, \ch, c0, c5, 0
-		.endm
 #elif defined(CONFIG_CPU_XSCALE)
 		.macro	loadsp, rb, tmp
 		.endm
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 4657e87..2df3826 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -36,7 +36,7 @@ extern void error(char *x);
 
 #ifdef CONFIG_DEBUG_ICEDCC
 
-#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
 
 static void icedcc_putc(int ch)
 {
@@ -52,16 +52,6 @@ static void icedcc_putc(int ch)
 	asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch));
 }
 
-#elif defined(CONFIG_CPU_V7)
-
-static void icedcc_putc(int ch)
-{
-	asm(
-	"wait:	mrc	p14, 0, pc, c0, c1, 0			\n\
-		bcs	wait					\n\
-		mcr     p14, 0, %0, c0, c5, 0			"
-	: : "r" (ch));
-}
 
 #elif defined(CONFIG_CPU_XSCALE)
 
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index d2d983b..bcd66e0 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -25,7 +25,7 @@
 		.macro	addruart, rp, rv
 		.endm
 
-#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
 
 		.macro	senduart, rd, rx
 		mcr	p14, 0, \rd, c0, c5, 0
@@ -49,23 +49,6 @@
 1002:
 		.endm
 
-#elif defined(CONFIG_CPU_V7)
-
-		.macro	senduart, rd, rx
-		mcr	p14, 0, \rd, c0, c5, 0
-		.endm
-
-		.macro	busyuart, rd, rx
-busy:		mrc	p14, 0, pc, c0, c1, 0
-		bcs	busy
-		.endm
-
-		.macro	waituart, rd, rx
-wait:		mrc	p14, 0, pc, c0, c1, 0
-		bcs	wait
-
-		.endm
-
 #elif defined(CONFIG_CPU_XSCALE)
 
 		.macro	senduart, rd, rx
-- 
cgit v1.1