From 82e6923e1862428b755ec306b3dbccf926849314 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Fri, 21 Jan 2011 11:04:45 +0000
Subject: ARM: lh7a40x: remove unmaintained platform support
lh7a40x has only been receiving updates for updates to generic code.
The last involvement from the maintainer according to the git logs was
in 2006. As such, it is a maintainence burden with no benefit.
This gets rid of two defconfigs.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
arch/arm/Kconfig | 13 -
arch/arm/Makefile | 1 -
arch/arm/configs/lpd7a400_defconfig | 68 ----
arch/arm/configs/lpd7a404_defconfig | 81 -----
arch/arm/include/asm/setup.h | 6 +-
arch/arm/mach-lh7a40x/Kconfig | 74 ----
arch/arm/mach-lh7a40x/Makefile | 17 -
arch/arm/mach-lh7a40x/Makefile.boot | 4 -
arch/arm/mach-lh7a40x/arch-kev7a400.c | 118 -------
arch/arm/mach-lh7a40x/arch-lpd7a40x.c | 422 -----------------------
arch/arm/mach-lh7a40x/clcd.c | 241 -------------
arch/arm/mach-lh7a40x/clocks.c | 108 ------
arch/arm/mach-lh7a40x/common.h | 17 -
arch/arm/mach-lh7a40x/include/mach/clocks.h | 18 -
arch/arm/mach-lh7a40x/include/mach/constants.h | 91 -----
arch/arm/mach-lh7a40x/include/mach/debug-macro.S | 37 --
arch/arm/mach-lh7a40x/include/mach/dma.h | 86 -----
arch/arm/mach-lh7a40x/include/mach/entry-macro.S | 149 --------
arch/arm/mach-lh7a40x/include/mach/hardware.h | 62 ----
arch/arm/mach-lh7a40x/include/mach/io.h | 20 --
arch/arm/mach-lh7a40x/include/mach/irqs.h | 200 -----------
arch/arm/mach-lh7a40x/include/mach/memory.h | 28 --
arch/arm/mach-lh7a40x/include/mach/registers.h | 224 ------------
arch/arm/mach-lh7a40x/include/mach/ssp.h | 70 ----
arch/arm/mach-lh7a40x/include/mach/system.h | 19 -
arch/arm/mach-lh7a40x/include/mach/timex.h | 17 -
arch/arm/mach-lh7a40x/include/mach/uncompress.h | 38 --
arch/arm/mach-lh7a40x/include/mach/vmalloc.h | 10 -
arch/arm/mach-lh7a40x/irq-kev7a400.c | 93 -----
arch/arm/mach-lh7a40x/irq-lh7a400.c | 91 -----
arch/arm/mach-lh7a40x/irq-lh7a404.c | 175 ----------
arch/arm/mach-lh7a40x/irq-lpd7a40x.c | 128 -------
arch/arm/mach-lh7a40x/lcd-panel.h | 345 ------------------
arch/arm/mach-lh7a40x/ssp-cpld.c | 343 ------------------
arch/arm/mach-lh7a40x/time.c | 71 ----
35 files changed, 1 insertion(+), 3484 deletions(-)
delete mode 100644 arch/arm/configs/lpd7a400_defconfig
delete mode 100644 arch/arm/configs/lpd7a404_defconfig
delete mode 100644 arch/arm/mach-lh7a40x/Kconfig
delete mode 100644 arch/arm/mach-lh7a40x/Makefile
delete mode 100644 arch/arm/mach-lh7a40x/Makefile.boot
delete mode 100644 arch/arm/mach-lh7a40x/arch-kev7a400.c
delete mode 100644 arch/arm/mach-lh7a40x/arch-lpd7a40x.c
delete mode 100644 arch/arm/mach-lh7a40x/clcd.c
delete mode 100644 arch/arm/mach-lh7a40x/clocks.c
delete mode 100644 arch/arm/mach-lh7a40x/common.h
delete mode 100644 arch/arm/mach-lh7a40x/include/mach/clocks.h
delete mode 100644 arch/arm/mach-lh7a40x/include/mach/constants.h
delete mode 100644 arch/arm/mach-lh7a40x/include/mach/debug-macro.S
delete mode 100644 arch/arm/mach-lh7a40x/include/mach/dma.h
delete mode 100644 arch/arm/mach-lh7a40x/include/mach/entry-macro.S
delete mode 100644 arch/arm/mach-lh7a40x/include/mach/hardware.h
delete mode 100644 arch/arm/mach-lh7a40x/include/mach/io.h
delete mode 100644 arch/arm/mach-lh7a40x/include/mach/irqs.h
delete mode 100644 arch/arm/mach-lh7a40x/include/mach/memory.h
delete mode 100644 arch/arm/mach-lh7a40x/include/mach/registers.h
delete mode 100644 arch/arm/mach-lh7a40x/include/mach/ssp.h
delete mode 100644 arch/arm/mach-lh7a40x/include/mach/system.h
delete mode 100644 arch/arm/mach-lh7a40x/include/mach/timex.h
delete mode 100644 arch/arm/mach-lh7a40x/include/mach/uncompress.h
delete mode 100644 arch/arm/mach-lh7a40x/include/mach/vmalloc.h
delete mode 100644 arch/arm/mach-lh7a40x/irq-kev7a400.c
delete mode 100644 arch/arm/mach-lh7a40x/irq-lh7a400.c
delete mode 100644 arch/arm/mach-lh7a40x/irq-lh7a404.c
delete mode 100644 arch/arm/mach-lh7a40x/irq-lpd7a40x.c
delete mode 100644 arch/arm/mach-lh7a40x/lcd-panel.h
delete mode 100644 arch/arm/mach-lh7a40x/ssp-cpld.c
delete mode 100644 arch/arm/mach-lh7a40x/time.c
(limited to 'arch/arm')
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5cff165..18a1eb9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -795,17 +795,6 @@ config ARCH_TCC_926
help
Support for Telechips TCC ARM926-based systems.
-config ARCH_LH7A40X
- bool "Sharp LH7A40X"
- select CPU_ARM922T
- select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
- select ARCH_USES_GETTIMEOFFSET
- help
- Say Y here for systems based on one of the Sharp LH7A40X
- System on a Chip processors. These CPUs include an ARM922T
- core with a wide array of integrated devices for
- hand-held and low-power applications.
-
config ARCH_U300
bool "ST-Ericsson U300 Series"
depends on MMU
@@ -922,8 +911,6 @@ source "arch/arm/mach-kirkwood/Kconfig"
source "arch/arm/mach-ks8695/Kconfig"
-source "arch/arm/mach-lh7a40x/Kconfig"
-
source "arch/arm/mach-loki/Kconfig"
source "arch/arm/mach-lpc32xx/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c22c1ad..aa18cb9 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -146,7 +146,6 @@ machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx
machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood
machine-$(CONFIG_ARCH_KS8695) := ks8695
-machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x
machine-$(CONFIG_ARCH_LOKI) := loki
machine-$(CONFIG_ARCH_LPC32XX) := lpc32xx
machine-$(CONFIG_ARCH_MMP) := mmp
diff --git a/arch/arm/configs/lpd7a400_defconfig b/arch/arm/configs/lpd7a400_defconfig
deleted file mode 100644
index 5a48f17..0000000
--- a/arch/arm/configs/lpd7a400_defconfig
+++ /dev/null
@@ -1,68 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-# CONFIG_HOTPLUG is not set
-# CONFIG_EPOLL is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_ARCH_LH7A40X=y
-CONFIG_MACH_LPD7A400=y
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_IDE=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_LH7A40X=y
-CONFIG_SERIAL_LH7A40X_CONSOLE=y
-CONFIG_FB=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
diff --git a/arch/arm/configs/lpd7a404_defconfig b/arch/arm/configs/lpd7a404_defconfig
deleted file mode 100644
index 22d0631..0000000
--- a/arch/arm/configs/lpd7a404_defconfig
+++ /dev/null
@@ -1,81 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_EXPERT=y
-# CONFIG_HOTPLUG is not set
-# CONFIG_EPOLL is not set
-CONFIG_SLAB=y
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_ARCH_LH7A40X=y
-CONFIG_MACH_LPD7A404=y
-CONFIG_PREEMPT=y
-CONFIG_DISCONTIGMEM_MANUAL=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_IDE=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_LH7A40X=y
-CONFIG_SERIAL_LH7A40X_CONSOLE=y
-CONFIG_FB=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ZERO=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index f1e5a9b..da8b52e 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -192,11 +192,7 @@ static struct tagtable __tagtable_##fn __tag = { tag, fn }
/*
* Memory map description
*/
-#ifdef CONFIG_ARCH_LH7A40X
-# define NR_BANKS 16
-#else
-# define NR_BANKS 8
-#endif
+#define NR_BANKS 8
struct membank {
unsigned long start;
diff --git a/arch/arm/mach-lh7a40x/Kconfig b/arch/arm/mach-lh7a40x/Kconfig
deleted file mode 100644
index 9be7466..0000000
--- a/arch/arm/mach-lh7a40x/Kconfig
+++ /dev/null
@@ -1,74 +0,0 @@
-if ARCH_LH7A40X
-
-menu "LH7A40X Implementations"
-
-config MACH_KEV7A400
- bool "KEV7A400"
- select ARCH_LH7A400
- help
- Say Y here if you are using the Sharp KEV7A400 development
- board. This hardware is discontinued, so I'd be very
- surprised if you wanted this option.
-
-config MACH_LPD7A400
- bool "LPD7A400 Card Engine"
- select ARCH_LH7A400
-# select IDE_POLL
-# select HAS_TOUCHSCREEN_ADS7843_LH7
- help
- Say Y here if you are using Logic Product Development's
- LPD7A400 CardEngine. For the time being, the LPD7A400 and
- LPD7A404 options are mutually exclusive.
-
-config MACH_LPD7A404
- bool "LPD7A404 Card Engine"
- select ARCH_LH7A404
-# select IDE_POLL
-# select HAS_TOUCHSCREEN_ADC_LH7
- help
- Say Y here if you are using Logic Product Development's
- LPD7A404 CardEngine. For the time being, the LPD7A400 and
- LPD7A404 options are mutually exclusive.
-
-config ARCH_LH7A400
- bool
-
-config ARCH_LH7A404
- bool
-
-config LPD7A40X_CPLD_SSP
- bool
-
-config LH7A40X_CONTIGMEM
- bool "Disable NUMA/SparseMEM Support"
- help
- Say Y here if your bootloader sets the SROMLL bit(s) in
- the SDRAM controller, organizing memory as a contiguous
- array. This option will disable sparse memory support
- and force the kernel to manage all memory in one node.
-
- Setting this option incorrectly may prevent the kernel
- from booting. It is OK to leave it N.
-
- For more information, consult
- <file:Documentation/arm/Sharp-LH/SDRAM>.
-
-config LH7A40X_ONE_BANK_PER_NODE
- bool "Optimize NUMA Node Tables for Size"
- depends on !LH7A40X_CONTIGMEM
- help
- Say Y here to produce compact memory node tables. By
- default pairs of adjacent physical RAM banks are managed
- together in a single node, incurring some wasted overhead
- in the node tables, however also maintaining compatibility
- with systems where physical memory is truly contiguous.
-
- Setting this option incorrectly may prevent the kernel from
- booting. It is OK to leave it N.
-
- For more information, consult
- <file:Documentation/arm/Sharp-LH/SDRAM>.
-
-endmenu
-
-endif
diff --git a/arch/arm/mach-lh7a40x/Makefile b/arch/arm/mach-lh7a40x/Makefile
deleted file mode 100644
index 94b8615..0000000
--- a/arch/arm/mach-lh7a40x/Makefile
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y := time.o clocks.o
-obj-m :=
-obj-n :=
-obj- :=
-
-obj-$(CONFIG_MACH_KEV7A400) += arch-kev7a400.o irq-lh7a400.o
-obj-$(CONFIG_MACH_LPD7A400) += arch-lpd7a40x.o irq-lh7a400.o
-obj-$(CONFIG_MACH_LPD7A404) += arch-lpd7a40x.o irq-lh7a404.o
-obj-$(CONFIG_LPD7A40X_CPLD_SSP) += ssp-cpld.o
-obj-$(CONFIG_FB_ARMCLCD) += clcd.o
-
diff --git a/arch/arm/mach-lh7a40x/Makefile.boot b/arch/arm/mach-lh7a40x/Makefile.boot
deleted file mode 100644
index af941be..0000000
--- a/arch/arm/mach-lh7a40x/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
- zreladdr-y := 0xc0008000
-params_phys-y := 0xc0000100
-initrd_phys-y := 0xc4000000
-
diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c
deleted file mode 100644
index 71129c3..0000000
--- a/arch/arm/mach-lh7a40x/arch-kev7a400.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/* arch/arm/mach-lh7a40x/arch-kev7a400.c
- *
- * Copyright (C) 2004 Logic Product Development
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <linux/tty.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-
- /* This function calls the board specific IRQ initialization function. */
-
-static struct map_desc kev7a400_io_desc[] __initdata = {
- {
- .virtual = IO_VIRT,
- .pfn = __phys_to_pfn(IO_PHYS),
- .length = IO_SIZE,
- .type = MT_DEVICE
- }, {
- .virtual = CPLD_VIRT,
- .pfn = __phys_to_pfn(CPLD_PHYS),
- .length = CPLD_SIZE,
- .type = MT_DEVICE
- }
-};
-
-void __init kev7a400_map_io(void)
-{
- iotable_init (kev7a400_io_desc, ARRAY_SIZE (kev7a400_io_desc));
-}
-
-static u16 CPLD_IRQ_mask; /* Mask for CPLD IRQs, 1 == unmasked */
-
-static void kev7a400_ack_cpld_irq(struct irq_data *d)
-{
- CPLD_CL_INT = 1 << (d->irq - IRQ_KEV7A400_CPLD);
-}
-
-static void kev7a400_mask_cpld_irq(struct irq_data *d)
-{
- CPLD_IRQ_mask &= ~(1 << (d->irq - IRQ_KEV7A400_CPLD));
- CPLD_WR_PB_INT_MASK = CPLD_IRQ_mask;
-}
-
-static void kev7a400_unmask_cpld_irq(struct irq_data *d)
-{
- CPLD_IRQ_mask |= 1 << (d->irq - IRQ_KEV7A400_CPLD);
- CPLD_WR_PB_INT_MASK = CPLD_IRQ_mask;
-}
-
-static struct irq_chip kev7a400_cpld_chip = {
- .name = "CPLD",
- .irq_ack = kev7a400_ack_cpld_irq,
- .irq_mask = kev7a400_mask_cpld_irq,
- .irq_unmask = kev7a400_unmask_cpld_irq,
-};
-
-
-static void kev7a400_cpld_handler (unsigned int irq, struct irq_desc *desc)
-{
- u32 mask = CPLD_LATCHED_INTS;
- irq = IRQ_KEV7A400_CPLD;
- for (; mask; mask >>= 1, ++irq)
- if (mask & 1)
- generic_handle_irq(irq);
-}
-
-void __init lh7a40x_init_board_irq (void)
-{
- int irq;
-
- for (irq = IRQ_KEV7A400_CPLD;
- irq < IRQ_KEV7A400_CPLD + NR_IRQ_BOARD; ++irq) {
- set_irq_chip (irq, &kev7a400_cpld_chip);
- set_irq_handler (irq, handle_edge_irq);
- set_irq_flags (irq, IRQF_VALID);
- }
- set_irq_chained_handler (IRQ_CPLD, kev7a400_cpld_handler);
-
- /* Clear all CPLD interrupts */
- CPLD_CL_INT = 0xff; /* CPLD_INTR_MMC_CD | CPLD_INTR_ETH_INT; */
-
- GPIO_GPIOINTEN = 0; /* Disable all GPIO interrupts */
- barrier();
-
-#if 0
- GPIO_INTTYPE1
- = (GPIO_INTR_PCC1_CD | GPIO_INTR_PCC1_CD); /* Edge trig. */
- GPIO_INTTYPE2 = 0; /* Falling edge & low-level */
- GPIO_GPIOFEOI = 0xff; /* Clear all GPIO interrupts */
- GPIO_GPIOINTEN = 0xff; /* Enable all GPIO interrupts */
-
- init_FIQ();
-#endif
-}
-
-MACHINE_START (KEV7A400, "Sharp KEV7a400")
- /* Maintainer: Marc Singer */
- .boot_params = 0xc0000100,
- .map_io = kev7a400_map_io,
- .init_irq = lh7a400_init_irq,
- .timer = &lh7a40x_timer,
-MACHINE_END
diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
deleted file mode 100644
index e735546..0000000
--- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
+++ /dev/null
@@ -1,422 +0,0 @@
-/* arch/arm/mach-lh7a40x/arch-lpd7a40x.c
- *
- * Copyright (C) 2004 Logic Product Development
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <linux/tty.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-
-#define CPLD_INT_NETHERNET (1<<0)
-#define CPLD_INTMASK_ETHERNET (1<<2)
-#if defined (CONFIG_MACH_LPD7A400)
-# define CPLD_INT_NTOUCH (1<<1)
-# define CPLD_INTMASK_TOUCH (1<<3)
-# define CPLD_INT_PEN (1<<4)
-# define CPLD_INTMASK_PEN (1<<4)
-# define CPLD_INT_PIRQ (1<<4)
-#endif
-#define CPLD_INTMASK_CPLD (1<<7)
-#define CPLD_INT_CPLD (1<<6)
-
-#define CPLD_CONTROL_SWINT (1<<7) /* Disable all CPLD IRQs */
-#define CPLD_CONTROL_OCMSK (1<<6) /* Mask USB1 connect IRQ */
-#define CPLD_CONTROL_PDRV (1<<5) /* PCC_nDRV high */
-#define CPLD_CONTROL_USB1C (1<<4) /* USB1 connect IRQ active */
-#define CPLD_CONTROL_USB1P (1<<3) /* USB1 power disable */
-#define CPLD_CONTROL_AWKP (1<<2) /* Auto-wakeup disabled */
-#define CPLD_CONTROL_LCD_ENABLE (1<<1) /* LCD Vee enable */
-#define CPLD_CONTROL_WRLAN_NENABLE (1<<0) /* SMC91x power disable */
-
-
-static struct resource smc91x_resources[] = {
- [0] = {
- .start = CPLD00_PHYS,
- .end = CPLD00_PHYS + CPLD00_SIZE - 1, /* Only needs 16B */
- .flags = IORESOURCE_MEM,
- },
-
- [1] = {
- .start = IRQ_LPD7A40X_ETH_INT,
- .end = IRQ_LPD7A40X_ETH_INT,
- .flags = IORESOURCE_IRQ,
- },
-
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-
-static struct resource lh7a40x_usbclient_resources[] = {
- [0] = {
- .start = USB_PHYS,
- .end = (USB_PHYS + PAGE_SIZE),
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USB,
- .end = IRQ_USB,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 lh7a40x_usbclient_dma_mask = 0xffffffffUL;
-
-static struct platform_device lh7a40x_usbclient_device = {
-// .name = "lh7a40x_udc",
- .name = "lh7-udc",
- .id = 0,
- .dev = {
- .dma_mask = &lh7a40x_usbclient_dma_mask,
- .coherent_dma_mask = 0xffffffffUL,
- },
- .num_resources = ARRAY_SIZE (lh7a40x_usbclient_resources),
- .resource = lh7a40x_usbclient_resources,
-};
-
-#if defined (CONFIG_ARCH_LH7A404)
-
-static struct resource lh7a404_usbhost_resources [] = {
- [0] = {
- .start = USBH_PHYS,
- .end = (USBH_PHYS + 0xFF),
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USHINTR,
- .end = IRQ_USHINTR,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 lh7a404_usbhost_dma_mask = 0xffffffffUL;
-
-static struct platform_device lh7a404_usbhost_device = {
- .name = "lh7a404-ohci",
- .id = 0,
- .dev = {
- .dma_mask = &lh7a404_usbhost_dma_mask,
- .coherent_dma_mask = 0xffffffffUL,
- },
- .num_resources = ARRAY_SIZE (lh7a404_usbhost_resources),
- .resource = lh7a404_usbhost_resources,
-};
-
-#endif
-
-static struct platform_device* lpd7a40x_devs[] __initdata = {
- &smc91x_device,
- &lh7a40x_usbclient_device,
-#if defined (CONFIG_ARCH_LH7A404)
- &lh7a404_usbhost_device,
-#endif
-};
-
-extern void lpd7a400_map_io (void);
-
-static void __init lpd7a40x_init (void)
-{
-#if defined (CONFIG_MACH_LPD7A400)
- CPLD_CONTROL |= 0
- | CPLD_CONTROL_SWINT /* Disable software interrupt */
- | CPLD_CONTROL_OCMSK; /* Mask USB1 connection IRQ */
- CPLD_CONTROL &= ~(0
- | CPLD_CONTROL_LCD_ENABLE /* Disable LCD */
- | CPLD_CONTROL_WRLAN_NENABLE /* Enable SMC91x */
- );
-#endif
-
-#if defined (CONFIG_MACH_LPD7A404)
- CPLD_CONTROL &= ~(0
- | CPLD_CONTROL_WRLAN_NENABLE /* Enable SMC91x */
- );
-#endif
-
- platform_add_devices (lpd7a40x_devs, ARRAY_SIZE (lpd7a40x_devs));
-#if defined (CONFIG_FB_ARMCLCD)
- lh7a40x_clcd_init ();
-#endif
-}
-
-static void lh7a40x_ack_cpld_irq(struct irq_data *d)
-{
- /* CPLD doesn't have ack capability, but some devices may */
-
-#if defined (CPLD_INTMASK_TOUCH)
- /* The touch control *must* mask the interrupt because the
- * interrupt bit is read by the driver to determine if the pen
- * is still down. */
- if (d->irq == IRQ_TOUCH)
- CPLD_INTERRUPTS |= CPLD_INTMASK_TOUCH;
-#endif
-}
-
-static void lh7a40x_mask_cpld_irq(struct irq_data *d)
-{
- switch (d->irq) {
- case IRQ_LPD7A40X_ETH_INT:
- CPLD_INTERRUPTS |= CPLD_INTMASK_ETHERNET;
- break;
-#if defined (IRQ_TOUCH)
- case IRQ_TOUCH:
- CPLD_INTERRUPTS |= CPLD_INTMASK_TOUCH;
- break;
-#endif
- }
-}
-
-static void lh7a40x_unmask_cpld_irq(struct irq_data *d)
-{
- switch (d->irq) {
- case IRQ_LPD7A40X_ETH_INT:
- CPLD_INTERRUPTS &= ~CPLD_INTMASK_ETHERNET;
- break;
-#if defined (IRQ_TOUCH)
- case IRQ_TOUCH:
- CPLD_INTERRUPTS &= ~CPLD_INTMASK_TOUCH;
- break;
-#endif
- }
-}
-
-static struct irq_chip lpd7a40x_cpld_chip = {
- .name = "CPLD",
- .irq_ack = lh7a40x_ack_cpld_irq,
- .irq_mask = lh7a40x_mask_cpld_irq,
- .irq_unmask = lh7a40x_unmask_cpld_irq,
-};
-
-static void lpd7a40x_cpld_handler (unsigned int irq, struct irq_desc *desc)
-{
- unsigned int mask = CPLD_INTERRUPTS;
-
- desc->irq_data.chip->irq_ack(&desc->irq_data);
-
- if ((mask & (1<<0)) == 0) /* WLAN */
- generic_handle_irq(IRQ_LPD7A40X_ETH_INT);
-
-#if defined (IRQ_TOUCH)
- if ((mask & (1<<1)) == 0) /* Touch */
- generic_handle_irq(IRQ_TOUCH);
-#endif
-
- /* Level-triggered need this */
- desc->irq_data.chip->irq_unmask(&desc->irq_data);
-}
-
-
-void __init lh7a40x_init_board_irq (void)
-{
- int irq;
-
- /* Rev A (v2.8): PF0, PF1, PF2, and PF3 are available IRQs.
- PF7 supports the CPLD.
- Rev B (v3.4): PF0, PF1, and PF2 are available IRQs.
- PF3 supports the CPLD.
- (Some) LPD7A404 prerelease boards report a version
- number of 0x16, but we force an override since the
- hardware is of the newer variety.
- */
-
- unsigned char cpld_version = CPLD_REVISION;
- int pinCPLD = (cpld_version == 0x28) ? 7 : 3;
-
-#if defined CONFIG_MACH_LPD7A404
- cpld_version = 0x34; /* Coerce LPD7A404 to RevB */
-#endif
-
- /* First, configure user controlled GPIOF interrupts */
-
- GPIO_PFDD &= ~0x0f; /* PF0-3 are inputs */
- GPIO_INTTYPE1 &= ~0x0f; /* PF0-3 are level triggered */
- GPIO_INTTYPE2 &= ~0x0f; /* PF0-3 are active low */
- barrier ();
- GPIO_GPIOFINTEN |= 0x0f; /* Enable PF0, PF1, PF2, and PF3 IRQs */
-
- /* Then, configure CPLD interrupt */
-
- /* Disable all CPLD interrupts */
-#if defined (CONFIG_MACH_LPD7A400)
- CPLD_INTERRUPTS = CPLD_INTMASK_TOUCH | CPLD_INTMASK_PEN
- | CPLD_INTMASK_ETHERNET;
- /* *** FIXME: don't know why we need 7 and 4. 7 is way wrong
- and 4 is uncefined. */
- // (1<<7)|(1<<4)|(1<<3)|(1<<2);
-#endif
-#if defined (CONFIG_MACH_LPD7A404)
- CPLD_INTERRUPTS = CPLD_INTMASK_ETHERNET;
- /* *** FIXME: don't know why we need 6 and 5, neither is defined. */
- // (1<<6)|(1<<5)|(1<<3);
-#endif
- GPIO_PFDD &= ~(1 << pinCPLD); /* Make input */
- GPIO_INTTYPE1 &= ~(1 << pinCPLD); /* Level triggered */
- GPIO_INTTYPE2 &= ~(1 << pinCPLD); /* Active low */
- barrier ();
- GPIO_GPIOFINTEN |= (1 << pinCPLD); /* Enable */
-
- /* Cascade CPLD interrupts */
-
- for (irq = IRQ_BOARD_START;
- irq < IRQ_BOARD_START + NR_IRQ_BOARD; ++irq) {
- set_irq_chip (irq, &lpd7a40x_cpld_chip);
- set_irq_handler (irq, handle_level_irq);
- set_irq_flags (irq, IRQF_VALID);
- }
-
- set_irq_chained_handler ((cpld_version == 0x28)
- ? IRQ_CPLD_V28
- : IRQ_CPLD_V34,
- lpd7a40x_cpld_handler);
-}
-
-static struct map_desc lpd7a40x_io_desc[] __initdata = {
- {
- .virtual = IO_VIRT,
- .pfn = __phys_to_pfn(IO_PHYS),
- .length = IO_SIZE,
- .type = MT_DEVICE
- },
- { /* Mapping added to work around chip select problems */
- .virtual = IOBARRIER_VIRT,
- .pfn = __phys_to_pfn(IOBARRIER_PHYS),
- .length = IOBARRIER_SIZE,
- .type = MT_DEVICE
- },
- {
- .virtual = CF_VIRT,
- .pfn = __phys_to_pfn(CF_PHYS),
- .length = CF_SIZE,
- .type = MT_DEVICE
- },
- {
- .virtual = CPLD02_VIRT,
- .pfn = __phys_to_pfn(CPLD02_PHYS),
- .length = CPLD02_SIZE,
- .type = MT_DEVICE
- },
- {
- .virtual = CPLD06_VIRT,
- .pfn = __phys_to_pfn(CPLD06_PHYS),
- .length = CPLD06_SIZE,
- .type = MT_DEVICE
- },
- {
- .virtual = CPLD08_VIRT,
- .pfn = __phys_to_pfn(CPLD08_PHYS),
- .length = CPLD08_SIZE,
- .type = MT_DEVICE
- },
- {
- .virtual = CPLD08_VIRT,
- .pfn = __phys_to_pfn(CPLD08_PHYS),
- .length = CPLD08_SIZE,
- .type = MT_DEVICE
- },
- {
- .virtual = CPLD0A_VIRT,
- .pfn = __phys_to_pfn(CPLD0A_PHYS),
- .length = CPLD0A_SIZE,
- .type = MT_DEVICE
- },
- {
- .virtual = CPLD0C_VIRT,
- .pfn = __phys_to_pfn(CPLD0C_PHYS),
- .length = CPLD0C_SIZE,
- .type = MT_DEVICE
- },
- {
- .virtual = CPLD0E_VIRT,
- .pfn = __phys_to_pfn(CPLD0E_PHYS),
- .length = CPLD0E_SIZE,
- .type = MT_DEVICE
- },
- {
- .virtual = CPLD10_VIRT,
- .pfn = __phys_to_pfn(CPLD10_PHYS),
- .length = CPLD10_SIZE,
- .type = MT_DEVICE
- },
- {
- .virtual = CPLD12_VIRT,
- .pfn = __phys_to_pfn(CPLD12_PHYS),
- .length = CPLD12_SIZE,
- .type = MT_DEVICE
- },
- {
- .virtual = CPLD14_VIRT,
- .pfn = __phys_to_pfn(CPLD14_PHYS),
- .length = CPLD14_SIZE,
- .type = MT_DEVICE
- },
- {
- .virtual = CPLD16_VIRT,
- .pfn = __phys_to_pfn(CPLD16_PHYS),
- .length = CPLD16_SIZE,
- .type = MT_DEVICE
- },
- {
- .virtual = CPLD18_VIRT,
- .pfn = __phys_to_pfn(CPLD18_PHYS),
- .length = CPLD18_SIZE,
- .type = MT_DEVICE
- },
- {
- .virtual = CPLD1A_VIRT,
- .pfn = __phys_to_pfn(CPLD1A_PHYS),
- .length = CPLD1A_SIZE,
- .type = MT_DEVICE
- },
-};
-
-void __init
-lpd7a40x_map_io(void)
-{
- iotable_init (lpd7a40x_io_desc, ARRAY_SIZE (lpd7a40x_io_desc));
-}
-
-#ifdef CONFIG_MACH_LPD7A400
-
-MACHINE_START (LPD7A400, "Logic Product Development LPD7A400-10")
- /* Maintainer: Marc Singer */
- .boot_params = 0xc0000100,
- .map_io = lpd7a40x_map_io,
- .init_irq = lh7a400_init_irq,
- .timer = &lh7a40x_timer,
- .init_machine = lpd7a40x_init,
-MACHINE_END
-
-#endif
-
-#ifdef CONFIG_MACH_LPD7A404
-
-MACHINE_START (LPD7A404, "Logic Product Development LPD7A404-10")
- /* Maintainer: Marc Singer */
- .boot_params = 0xc0000100,
- .map_io = lpd7a40x_map_io,
- .init_irq = lh7a404_init_irq,
- .timer = &lh7a40x_timer,
- .init_machine = lpd7a40x_init,
-MACHINE_END
-
-#endif
diff --git a/arch/arm/mach-lh7a40x/clcd.c b/arch/arm/mach-lh7a40x/clcd.c
deleted file mode 100644
index 7fe4fd3..0000000
--- a/arch/arm/mach-lh7a40x/clcd.c
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * arch/arm/mach-lh7a40x/clcd.c
- *
- * Copyright (C) 2004 Marc Singer
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/gfp.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/sysdev.h>
-#include <linux/interrupt.h>
-
-//#include <linux/module.h>
-//#include <linux/time.h>
-
-//#include <asm/mach/time.h>
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-#include <asm/system.h>
-#include <mach/hardware.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-
-#define HRTFTC_HRSETUP __REG(HRTFTC_PHYS + 0x00)
-#define HRTFTC_HRCON __REG(HRTFTC_PHYS + 0x04)
-#define HRTFTC_HRTIMING1 __REG(HRTFTC_PHYS + 0x08)
-#define HRTFTC_HRTIMING2 __REG(HRTFTC_PHYS + 0x0c)
-
-#define ALI_SETUP __REG(ALI_PHYS + 0x00)
-#define ALI_CONTROL __REG(ALI_PHYS + 0x04)
-#define ALI_TIMING1 __REG(ALI_PHYS + 0x08)
-#define ALI_TIMING2 __REG(ALI_PHYS + 0x0c)
-
-#include "lcd-panel.h"
-
-static void lh7a40x_clcd_disable (struct clcd_fb *fb)
-{
-#if defined (CONFIG_MACH_LPD7A400)
- CPLD_CONTROL &= ~(1<<1); /* Disable LCD Vee */
-#endif
-
-#if defined (CONFIG_MACH_LPD7A404)
- GPIO_PCD &= ~(1<<3); /* Disable LCD Vee */
-#endif
-
-#if defined (CONFIG_ARCH_LH7A400)
- HRTFTC_HRSETUP &= ~(1<<13); /* Disable HRTFT controller */
-#endif
-
-#if defined (CONFIG_ARCH_LH7A404)
- ALI_SETUP &= ~(1<<13); /* Disable ALI */
-#endif
-}
-
-static void lh7a40x_clcd_enable (struct clcd_fb *fb)
-{
- struct clcd_panel_extra* extra
- = (struct clcd_panel_extra*) fb->board_data;
-
-#if defined (CONFIG_MACH_LPD7A400)
- CPLD_CONTROL |= (1<<1); /* Enable LCD Vee */
-#endif
-
-#if defined (CONFIG_MACH_LPD7A404)
- GPIO_PCDD &= ~(1<<3); /* Enable LCD Vee */
- GPIO_PCD |= (1<<3);
-#endif
-
-#if defined (CONFIG_ARCH_LH7A400)
-
- if (extra) {
- HRTFTC_HRSETUP
- = (1 << 13)
- | ((fb->fb.var.xres - 1) << 4)
- | 0xc
- | (extra->hrmode ? 1 : 0);
- HRTFTC_HRCON
- = ((extra->clsen ? 1 : 0) << 1)
- | ((extra->spsen ? 1 : 0) << 0);
- HRTFTC_HRTIMING1
- = (extra->pcdel << 8)
- | (extra->revdel << 4)
- | (extra->lpdel << 0);
- HRTFTC_HRTIMING2
- = (extra->spldel << 9)
- | (extra->pc2del << 0);
- }
- else
- HRTFTC_HRSETUP
- = (1 << 13)
- | 0xc;
-#endif
-
-#if defined (CONFIG_ARCH_LH7A404)
-
- if (extra) {
- ALI_SETUP
- = (1 << 13)
- | ((fb->fb.var.xres - 1) << 4)
- | 0xc
- | (extra->hrmode ? 1 : 0);
- ALI_CONTROL
- = ((extra->clsen ? 1 : 0) << 1)
- | ((extra->spsen ? 1 : 0) << 0);
- ALI_TIMING1
- = (extra->pcdel << 8)
- | (extra->revdel << 4)
- | (extra->lpdel << 0);
- ALI_TIMING2
- = (extra->spldel << 9)
- | (extra->pc2del << 0);
- }
- else
- ALI_SETUP
- = (1 << 13)
- | 0xc;
-#endif
-
-}
-
-#define FRAMESIZE(s) (((s) + PAGE_SIZE - 1)&PAGE_MASK)
-
-static int lh7a40x_clcd_setup (struct clcd_fb *fb)
-{
- dma_addr_t dma;
- u32 len = FRAMESIZE (lcd_panel.mode.xres*lcd_panel.mode.yres
- *(lcd_panel.bpp/8));
-
- fb->panel = &lcd_panel;
-
- /* Enforce the sync polarity defaults */
- if (!(fb->panel->tim2 & TIM2_IHS))
- fb->fb.var.sync |= FB_SYNC_HOR_HIGH_ACT;
- if (!(fb->panel->tim2 & TIM2_IVS))
- fb->fb.var.sync |= FB_SYNC_VERT_HIGH_ACT;
-
-#if defined (HAS_LCD_PANEL_EXTRA)
- fb->board_data = &lcd_panel_extra;
-#endif
-
- fb->fb.screen_base
- = dma_alloc_writecombine (&fb->dev->dev, len,
- &dma, GFP_KERNEL);
- printk ("CLCD: LCD setup fb virt 0x%p phys 0x%p l %x io 0x%p \n",
- fb->fb.screen_base, (void*) dma, len,
- (void*) io_p2v (CLCDC_PHYS));
- printk ("CLCD: pixclock %d\n", lcd_panel.mode.pixclock);
-
- if (!fb->fb.screen_base) {
- printk(KERN_ERR "CLCD: unable to map framebuffer\n");
- return -ENOMEM;
- }
-
-#if defined (USE_RGB555)
- fb->fb.var.green.length = 5; /* Panel uses RGB 5:5:5 */
-#endif
-
- fb->fb.fix.smem_start = dma;
- fb->fb.fix.smem_len = len;
-
- /* Drive PE4 high to prevent CPLD crash */
- GPIO_PEDD |= (1<<4);
- GPIO_PED |= (1<<4);
-
- GPIO_PINMUX |= (1<<1) | (1<<0); /* LCDVD[15:4] */
-
-// fb->fb.fbops->fb_check_var (&fb->fb.var, &fb->fb);
-// fb->fb.fbops->fb_set_par (&fb->fb);
-
- return 0;
-}
-
-static int lh7a40x_clcd_mmap (struct clcd_fb *fb, struct vm_area_struct *vma)
-{
- return dma_mmap_writecombine(&fb->dev->dev, vma,
- fb->fb.screen_base,
- fb->fb.fix.smem_start,
- fb->fb.fix.smem_len);
-}
-
-static void lh7a40x_clcd_remove (struct clcd_fb *fb)
-{
- dma_free_writecombine (&fb->dev->dev, fb->fb.fix.smem_len,
- fb->fb.screen_base, fb->fb.fix.smem_start);
-}
-
-static struct clcd_board clcd_platform_data = {
- .name = "lh7a40x FB",
- .check = clcdfb_check,
- .decode = clcdfb_decode,
- .enable = lh7a40x_clcd_enable,
- .setup = lh7a40x_clcd_setup,
- .mmap = lh7a40x_clcd_mmap,
- .remove = lh7a40x_clcd_remove,
- .disable = lh7a40x_clcd_disable,
-};
-
-#define IRQ_CLCDC (IRQ_LCDINTR)
-
-#define AMBA_DEVICE(name,busid,base,plat,pid) \
-static struct amba_device name##_device = { \
- .dev = { \
- .coherent_dma_mask = ~0, \
- .init_name = busid, \
- .platform_data = plat, \
- }, \
- .res = { \
- .start = base##_PHYS, \
- .end = (base##_PHYS) + (4*1024) - 1, \
- .flags = IORESOURCE_MEM, \
- }, \
- .dma_mask = ~0, \
- .irq = { IRQ_##base, }, \
- /* .dma = base##_DMA,*/ \
- .periphid = pid, \
-}
-
-AMBA_DEVICE(clcd, "cldc-lh7a40x", CLCDC, &clcd_platform_data, 0x41110);
-
-static struct amba_device *amba_devs[] __initdata = {
- &clcd_device,
-};
-
-void __init lh7a40x_clcd_init (void)
-{
- int i;
- int result;
- printk ("CLCD: registering amba devices\n");
- for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
- struct amba_device *d = amba_devs[i];
- result = amba_device_register(d, &iomem_resource);
- printk (" %d -> %d\n", i ,result);
- }
-}
diff --git a/arch/arm/mach-lh7a40x/clocks.c b/arch/arm/mach-lh7a40x/clocks.c
deleted file mode 100644
index 0651f96..0000000
--- a/arch/arm/mach-lh7a40x/clocks.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/* arch/arm/mach-lh7a40x/clocks.c
- *
- * Copyright (C) 2004 Marc Singer
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-#include <mach/hardware.h>
-#include <mach/clocks.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/string.h>
-
-struct module;
-
-struct clk {
- struct list_head node;
- unsigned long rate;
- struct module *owner;
- const char *name;
-};
-
-/* ----- */
-
-#define MAINDIV1(c) (((c) >> 7) & 0x0f)
-#define MAINDIV2(c) (((c) >> 11) & 0x1f)
-#define PS(c) (((c) >> 18) & 0x03)
-#define PREDIV(c) (((c) >> 2) & 0x1f)
-#define HCLKDIV(c) (((c) >> 0) & 0x02)
-#define PCLKDIV(c) (((c) >> 16) & 0x03)
-
-unsigned int fclkfreq_get (void)
-{
- unsigned int clkset = CSC_CLKSET;
- unsigned int gclk
- = XTAL_IN
- / (1 << PS(clkset))
- * (MAINDIV1(clkset) + 2)
- / (PREDIV(clkset) + 2)
- * (MAINDIV2(clkset) + 2)
- ;
- return gclk;
-}
-
-unsigned int hclkfreq_get (void)
-{
- unsigned int clkset = CSC_CLKSET;
- unsigned int hclk = fclkfreq_get () / (HCLKDIV(clkset) + 1);
-
- return hclk;
-}
-
-unsigned int pclkfreq_get (void)
-{
- unsigned int clkset = CSC_CLKSET;
- int pclkdiv = PCLKDIV(clkset);
- unsigned int pclk;
- if (pclkdiv == 0x3)
- pclkdiv = 0x2;
- pclk = hclkfreq_get () / (1 << pclkdiv);
-
- return pclk;
-}
-
-/* ----- */
-
-struct clk *clk_get (struct device *dev, const char *id)
-{
- return dev && strcmp(dev_name(dev), "cldc-lh7a40x") == 0
- ? NULL : ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put (struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
-int clk_enable (struct clk *clk)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable (struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate (struct clk *clk)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate (struct clk *clk, unsigned long rate)
-{
- return rate;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate (struct clk *clk, unsigned long rate)
-{
- return -EIO;
-}
-EXPORT_SYMBOL(clk_set_rate);
diff --git a/arch/arm/mach-lh7a40x/common.h b/arch/arm/mach-lh7a40x/common.h
deleted file mode 100644
index 6ed3f6b..0000000
--- a/arch/arm/mach-lh7a40x/common.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* arch/arm/mach-lh7a40x/common.h
- *
- * Copyright (C) 2004 Marc Singer
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-extern struct sys_timer lh7a40x_timer;
-
-extern void lh7a400_init_irq (void);
-extern void lh7a404_init_irq (void);
-extern void lh7a40x_clcd_init (void);
-extern void lh7a40x_init_board_irq (void);
-
diff --git a/arch/arm/mach-lh7a40x/include/mach/clocks.h b/arch/arm/mach-lh7a40x/include/mach/clocks.h
deleted file mode 100644
index fe2e025..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/clocks.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-lh7a40x/include/mach/clocks.h
- *
- * Copyright (C) 2004 Marc Singer
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_CLOCKS_H
-#define __ASM_ARCH_CLOCKS_H
-
-unsigned int fclkfreq_get (void);
-unsigned int hclkfreq_get (void);
-unsigned int pclkfreq_get (void);
-
-#endif /* _ASM_ARCH_CLOCKS_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/constants.h b/arch/arm/mach-lh7a40x/include/mach/constants.h
deleted file mode 100644
index 55c6edb..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/constants.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/* arch/arm/mach-lh7a40x/include/mach/constants.h
- *
- * Copyright (C) 2004 Coastal Environmental Systems
- * Copyright (C) 2004 Logic Product Development
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_CONSTANTS_H
-#define __ASM_ARCH_CONSTANTS_H
-
-
-/* Addressing constants */
-
- /* SoC CPU IO addressing */
-#define IO_PHYS (0x80000000)
-#define IO_VIRT (0xf8000000)
-#define IO_SIZE (0x0000B000)
-
-#ifdef CONFIG_MACH_KEV7A400
-# define CPLD_PHYS (0x20000000)
-# define CPLD_VIRT (0xf2000000)
-# define CPLD_SIZE PAGE_SIZE
-#endif
-
-#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
-
-# define IOBARRIER_PHYS 0x10000000 /* Second bank, fastest timing */
-# define IOBARRIER_VIRT 0xf0000000
-# define IOBARRIER_SIZE PAGE_SIZE
-
-# define CF_PHYS 0x60200000
-# define CF_VIRT 0xf6020000
-# define CF_SIZE (8*1024)
-
- /* The IO mappings for the LPD CPLD are, unfortunately, sparse. */
-# define CPLDX_PHYS(x) (0x70000000 | ((x) << 20))
-# define CPLDX_VIRT(x) (0xf7000000 | ((x) << 16))
-# define CPLD00_PHYS CPLDX_PHYS (0x00) /* Wired LAN */
-# define CPLD00_VIRT CPLDX_VIRT (0x00)
-# define CPLD00_SIZE PAGE_SIZE
-# define CPLD02_PHYS CPLDX_PHYS (0x02)
-# define CPLD02_VIRT CPLDX_VIRT (0x02)
-# define CPLD02_SIZE PAGE_SIZE
-# define CPLD06_PHYS CPLDX_PHYS (0x06)
-# define CPLD06_VIRT CPLDX_VIRT (0x06)
-# define CPLD06_SIZE PAGE_SIZE
-# define CPLD08_PHYS CPLDX_PHYS (0x08)
-# define CPLD08_VIRT CPLDX_VIRT (0x08)
-# define CPLD08_SIZE PAGE_SIZE
-# define CPLD0A_PHYS CPLDX_PHYS (0x0a)
-# define CPLD0A_VIRT CPLDX_VIRT (0x0a)
-# define CPLD0A_SIZE PAGE_SIZE
-# define CPLD0C_PHYS CPLDX_PHYS (0x0c)
-# define CPLD0C_VIRT CPLDX_VIRT (0x0c)
-# define CPLD0C_SIZE PAGE_SIZE
-# define CPLD0E_PHYS CPLDX_PHYS (0x0e)
-# define CPLD0E_VIRT CPLDX_VIRT (0x0e)
-# define CPLD0E_SIZE PAGE_SIZE
-# define CPLD10_PHYS CPLDX_PHYS (0x10)
-# define CPLD10_VIRT CPLDX_VIRT (0x10)
-# define CPLD10_SIZE PAGE_SIZE
-# define CPLD12_PHYS CPLDX_PHYS (0x12)
-# define CPLD12_VIRT CPLDX_VIRT (0x12)
-# define CPLD12_SIZE PAGE_SIZE
-# define CPLD14_PHYS CPLDX_PHYS (0x14)
-# define CPLD14_VIRT CPLDX_VIRT (0x14)
-# define CPLD14_SIZE PAGE_SIZE
-# define CPLD16_PHYS CPLDX_PHYS (0x16)
-# define CPLD16_VIRT CPLDX_VIRT (0x16)
-# define CPLD16_SIZE PAGE_SIZE
-# define CPLD18_PHYS CPLDX_PHYS (0x18)
-# define CPLD18_VIRT CPLDX_VIRT (0x18)
-# define CPLD18_SIZE PAGE_SIZE
-# define CPLD1A_PHYS CPLDX_PHYS (0x1a)
-# define CPLD1A_VIRT CPLDX_VIRT (0x1a)
-# define CPLD1A_SIZE PAGE_SIZE
-#endif
-
- /* Timing constants */
-
-#define XTAL_IN 14745600 /* 14.7456 MHz crystal */
-#define PLL_CLOCK (XTAL_IN * 21) /* 309 MHz PLL clock */
-#define MAX_HCLK_KHZ 100000 /* HCLK max limit ~100MHz */
-#define HCLK (99993600)
-//#define HCLK (119808000)
-
-#endif /* __ASM_ARCH_CONSTANTS_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
deleted file mode 100644
index cff3362..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/* arch/arm/mach-lh7a40x/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
- @ It is not known if this will be appropriate for every 40x
- @ board.
-
- .macro addruart, rp, rv
- mov \rp, #0x00000700 @ offset from base
- orr \rv, \rp, #0xf8000000 @ virtual base
- orr \rp, \rp, #0x80000000 @ physical base
- .endm
-
- .macro senduart,rd,rx
- strb \rd, [\rx] @ DATA
- .endm
-
- .macro busyuart,rd,rx @ spin while busy
-1001: ldr \rd, [\rx, #0x10] @ STATUS
- tst \rd, #1 << 3 @ BUSY (TX FIFO not empty)
- bne 1001b @ yes, spin
- .endm
-
- .macro waituart,rd,rx @ wait for Tx FIFO room
-1001: ldrb \rd, [\rx, #0x10] @ STATUS
- tst \rd, #1 << 5 @ TXFF (TX FIFO full)
- bne 1001b @ yes, spin
- .endm
diff --git a/arch/arm/mach-lh7a40x/include/mach/dma.h b/arch/arm/mach-lh7a40x/include/mach/dma.h
deleted file mode 100644
index baa3f8d..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/dma.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/* arch/arm/mach-lh7a40x/include/mach/dma.h
- *
- * Copyright (C) 2005 Marc Singer
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-typedef enum {
- DMA_M2M0 = 0,
- DMA_M2M1 = 1,
- DMA_M2P0 = 2, /* Tx */
- DMA_M2P1 = 3, /* Rx */
- DMA_M2P2 = 4, /* Tx */
- DMA_M2P3 = 5, /* Rx */
- DMA_M2P4 = 6, /* Tx - AC97 */
- DMA_M2P5 = 7, /* Rx - AC97 */
- DMA_M2P6 = 8, /* Tx */
- DMA_M2P7 = 9, /* Rx */
-} dma_device_t;
-
-#define DMA_LENGTH_MAX ((64*1024) - 4) /* bytes */
-
-#define DMAC_GCA __REG(DMAC_PHYS + 0x2b80)
-#define DMAC_GIR __REG(DMAC_PHYS + 0x2bc0)
-
-#define DMAC_GIR_MMI1 (1<<11)
-#define DMAC_GIR_MMI0 (1<<10)
-#define DMAC_GIR_MPI8 (1<<9)
-#define DMAC_GIR_MPI9 (1<<8)
-#define DMAC_GIR_MPI6 (1<<7)
-#define DMAC_GIR_MPI7 (1<<6)
-#define DMAC_GIR_MPI4 (1<<5)
-#define DMAC_GIR_MPI5 (1<<4)
-#define DMAC_GIR_MPI2 (1<<3)
-#define DMAC_GIR_MPI3 (1<<2)
-#define DMAC_GIR_MPI0 (1<<1)
-#define DMAC_GIR_MPI1 (1<<0)
-
-#define DMAC_M2P0 0x0000
-#define DMAC_M2P1 0x0040
-#define DMAC_M2P2 0x0080
-#define DMAC_M2P3 0x00c0
-#define DMAC_M2P4 0x0240
-#define DMAC_M2P5 0x0200
-#define DMAC_M2P6 0x02c0
-#define DMAC_M2P7 0x0280
-#define DMAC_M2P8 0x0340
-#define DMAC_M2P9 0x0300
-#define DMAC_M2M0 0x0100
-#define DMAC_M2M1 0x0140
-
-#define DMAC_P_PCONTROL(c) __REG(DMAC_PHYS + (c) + 0x00)
-#define DMAC_P_PINTERRUPT(c) __REG(DMAC_PHYS + (c) + 0x04)
-#define DMAC_P_PPALLOC(c) __REG(DMAC_PHYS + (c) + 0x08)
-#define DMAC_P_PSTATUS(c) __REG(DMAC_PHYS + (c) + 0x0c)
-#define DMAC_P_REMAIN(c) __REG(DMAC_PHYS + (c) + 0x14)
-#define DMAC_P_MAXCNT0(c) __REG(DMAC_PHYS + (c) + 0x20)
-#define DMAC_P_BASE0(c) __REG(DMAC_PHYS + (c) + 0x24)
-#define DMAC_P_CURRENT0(c) __REG(DMAC_PHYS + (c) + 0x28)
-#define DMAC_P_MAXCNT1(c) __REG(DMAC_PHYS + (c) + 0x30)
-#define DMAC_P_BASE1(c) __REG(DMAC_PHYS + (c) + 0x34)
-#define DMAC_P_CURRENT1(c) __REG(DMAC_PHYS + (c) + 0x38)
-
-#define DMAC_PCONTROL_ENABLE (1<<4)
-
-#define DMAC_PORT_USB 0
-#define DMAC_PORT_SDMMC 1
-#define DMAC_PORT_AC97_1 2
-#define DMAC_PORT_AC97_2 3
-#define DMAC_PORT_AC97_3 4
-#define DMAC_PORT_UART1 6
-#define DMAC_PORT_UART2 7
-#define DMAC_PORT_UART3 8
-
-#define DMAC_PSTATUS_CURRSTATE_SHIFT 4
-#define DMAC_PSTATUS_CURRSTATE_MASK 0x3
-
-#define DMAC_PSTATUS_NEXTBUF (1<<6)
-#define DMAC_PSTATUS_STALLRINT (1<<0)
-
-#define DMAC_INT_CHE (1<<3)
-#define DMAC_INT_NFB (1<<1)
-#define DMAC_INT_STALL (1<<0)
diff --git a/arch/arm/mach-lh7a40x/include/mach/entry-macro.S b/arch/arm/mach-lh7a40x/include/mach/entry-macro.S
deleted file mode 100644
index 069bb4c..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/entry-macro.S
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * arch/arm/mach-lh7a40x/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for LH7A40x platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-/* In order to allow there to be support for both of the processor
- classes at the same time, we make a hack here that isn't very
- pretty. At startup, the link pointed to with the
- branch_irq_lh7a400 symbol is replaced with a NOP when the CPU is
- detected as a lh7a404.
-
- *** FIXME: we should clean this up so that there is only one
- implementation for each CPU's design.
-
-*/
-
-#if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404)
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-branch_irq_lh7a400: b 1000f
-
-@ Implementation of the LH7A404 get_irqnr_and_base.
-
- mov \irqnr, #0 @ VIC1 irq base
- mov \base, #io_p2v(0x80000000) @ APB registers
- add \base, \base, #0x8000
- ldr \tmp, [\base, #0x0030] @ VIC1_VECTADDR
- tst \tmp, #VA_VECTORED @ Direct vectored
- bne 1002f
- tst \tmp, #VA_VIC1DEFAULT @ Default vectored VIC1
- ldrne \irqstat, [\base, #0] @ VIC1_IRQSTATUS
- bne 1001f
- add \base, \base, #(0xa000 - 0x8000)
- ldr \tmp, [\base, #0x0030] @ VIC2_VECTADDR
- tst \tmp, #VA_VECTORED @ Direct vectored
- bne 1002f
- ldr \irqstat, [\base, #0] @ VIC2_IRQSTATUS
- mov \irqnr, #32 @ VIC2 irq base
-
-1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry
- bcs 1008f @ Bit set; irq found
- add \irqnr, \irqnr, #1
- bne 1001b @ Until no bits
- b 1009f @ Nothing? Hmm.
-1002: and \irqnr, \tmp, #0x3f @ Mask for valid bits
-1008: movs \irqstat, #1 @ Force !Z
- str \tmp, [\base, #0x0030] @ Clear vector
- b 1009f
-
-@ Implementation of the LH7A400 get_irqnr_and_base.
-
-1000: mov \irqnr, #0
- mov \base, #io_p2v(0x80000000) @ APB registers
- ldr \irqstat, [\base, #0x500] @ PIC INTSR
-
-1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry
- bcs 1008f @ Bit set; irq found
- add \irqnr, \irqnr, #1
- bne 1001b @ Until no bits
- b 1009f @ Nothing? Hmm.
-1008: movs \irqstat, #1 @ Force !Z
-
-1009:
- .endm
-
-
-
-#elif defined (CONFIG_ARCH_LH7A400)
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- mov \irqnr, #0
- mov \base, #io_p2v(0x80000000) @ APB registers
- ldr \irqstat, [\base, #0x500] @ PIC INTSR
-
-1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry
- bcs 1008f @ Bit set; irq found
- add \irqnr, \irqnr, #1
- bne 1001b @ Until no bits
- b 1009f @ Nothing? Hmm.
-1008: movs \irqstat, #1 @ Force !Z
-1009:
- .endm
-
-#elif defined(CONFIG_ARCH_LH7A404)
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- mov \irqnr, #0 @ VIC1 irq base
- mov \base, #io_p2v(0x80000000) @ APB registers
- add \base, \base, #0x8000
- ldr \tmp, [\base, #0x0030] @ VIC1_VECTADDR
- tst \tmp, #VA_VECTORED @ Direct vectored
- bne 1002f
- tst \tmp, #VA_VIC1DEFAULT @ Default vectored VIC1
- ldrne \irqstat, [\base, #0] @ VIC1_IRQSTATUS
- bne 1001f
- add \base, \base, #(0xa000 - 0x8000)
- ldr \tmp, [\base, #0x0030] @ VIC2_VECTADDR
- tst \tmp, #VA_VECTORED @ Direct vectored
- bne 1002f
- ldr \irqstat, [\base, #0] @ VIC2_IRQSTATUS
- mov \irqnr, #32 @ VIC2 irq base
-
-1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry
- bcs 1008f @ Bit set; irq found
- add \irqnr, \irqnr, #1
- bne 1001b @ Until no bits
- b 1009f @ Nothing? Hmm.
-1002: and \irqnr, \tmp, #0x3f @ Mask for valid bits
-1008: movs \irqstat, #1 @ Force !Z
- str \tmp, [\base, #0x0030] @ Clear vector
-1009:
- .endm
-#endif
-
-
diff --git a/arch/arm/mach-lh7a40x/include/mach/hardware.h b/arch/arm/mach-lh7a40x/include/mach/hardware.h
deleted file mode 100644
index 59d2ace..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/hardware.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/* arch/arm/mach-lh7a40x/include/mach/hardware.h
- *
- * Copyright (C) 2004 Coastal Environmental Systems
- *
- * [ Substantially cribbed from arch/arm/mach-pxa/include/mach/hardware.h ]
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h> /* Added for the sake of amba-clcd driver */
-
-#define io_p2v(x) (0xf0000000 | (((x) & 0xfff00000) >> 4) | ((x) & 0x0000ffff))
-#define io_v2p(x) ( (((x) & 0x0fff0000) << 4) | ((x) & 0x0000ffff))
-
-#ifdef __ASSEMBLY__
-
-# define __REG(x) io_p2v(x)
-# define __PREG(x) io_v2p(x)
-
-#else
-
-# if 0
-# define __REG(x) (*((volatile u32 *)io_p2v(x)))
-# else
-/*
- * This __REG() version gives the same results as the one above, except
- * that we are fooling gcc somehow so it generates far better and smaller
- * assembly code for access to contiguous registers. It's a shame that gcc
- * doesn't guess this by itself.
- */
-#include <asm/types.h>
-typedef struct { volatile u32 offset[4096]; } __regbase;
-# define __REGP(x) ((__regbase *)((x)&~4095))->offset[((x)&4095)>>2]
-# define __REG(x) __REGP(io_p2v(x))
-typedef struct { volatile u16 offset[4096]; } __regbase16;
-# define __REGP16(x) ((__regbase16 *)((x)&~4095))->offset[((x)&4095)>>1]
-# define __REG16(x) __REGP16(io_p2v(x))
-typedef struct { volatile u8 offset[4096]; } __regbase8;
-# define __REGP8(x) ((__regbase8 *)((x)&~4095))->offset[(x)&4095]
-# define __REG8(x) __REGP8(io_p2v(x))
-#endif
-
-/* Let's kick gcc's ass again... */
-# define __REG2(x,y) \
- ( __builtin_constant_p(y) ? (__REG((x) + (y))) \
- : (*(volatile u32 *)((u32)&__REG(x) + (y))) )
-
-# define __PREG(x) (io_v2p((u32)&(x)))
-
-#endif
-
-#define MASK_AND_SET(v,m,s) (v) = ((v)&~(m))|(s)
-
-#include "registers.h"
-
-#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/io.h b/arch/arm/mach-lh7a40x/include/mach/io.h
deleted file mode 100644
index 6ece459..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/io.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* arch/arm/mach-lh7a40x/include/mach/io.h
- *
- * Copyright (C) 2004 Coastal Environmental Systems
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/* No ISA or PCI bus on this machine. */
-#define __io(a) __typesafe_io(a)
-#define __mem_pci(a) (a)
-
-#endif /* __ASM_ARCH_IO_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/irqs.h b/arch/arm/mach-lh7a40x/include/mach/irqs.h
deleted file mode 100644
index 0f9b836..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/irqs.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/* arch/arm/mach-lh7a40x/include/mach/irqs.h
- *
- * Copyright (C) 2004 Coastal Environmental Systems
- * Copyright (C) 2004 Logic Product Development
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-/* It is to be seen whether or not we can build a kernel for more than
- * one board. For the time being, these macros assume that we cannot.
- * Thus, it is OK to ifdef machine/board specific IRQ assignments.
- */
-
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-
-#define FIQ_START 80
-
-#if defined (CONFIG_ARCH_LH7A400)
-
- /* FIQs */
-
-# define IRQ_GPIO0FIQ 0 /* GPIO External FIQ Interrupt on F0 */
-# define IRQ_BLINT 1 /* Battery Low */
-# define IRQ_WEINT 2 /* Watchdog Timer, WDT overflow */
-# define IRQ_MCINT 3 /* Media Change, MEDCHG pin rising */
-
- /* IRQs */
-
-# define IRQ_CSINT 4 /* Audio Codec (ACI) */
-# define IRQ_GPIO1INTR 5 /* GPIO External IRQ Interrupt on F1 */
-# define IRQ_GPIO2INTR 6 /* GPIO External IRQ Interrupt on F2 */
-# define IRQ_GPIO3INTR 7 /* GPIO External IRQ Interrupt on F3 */
-# define IRQ_T1UI 8 /* Timer 1 underflow */
-# define IRQ_T2UI 9 /* Timer 2 underflow */
-# define IRQ_RTCMI 10
-# define IRQ_TINTR 11 /* Clock State Controller 64 Hz tick (CSC) */
-# define IRQ_UART1INTR 12
-# define IRQ_UART2INTR 13
-# define IRQ_LCDINTR 14
-# define IRQ_SSIEOT 15 /* Synchronous Serial Interface (SSI) */
-# define IRQ_UART3INTR 16
-# define IRQ_SCIINTR 17 /* Smart Card Interface (SCI) */
-# define IRQ_AACINTR 18 /* Advanced Audio Codec (AAC) */
-# define IRQ_MMCINTR 19 /* Multimedia Card (MMC) */
-# define IRQ_USBINTR 20
-# define IRQ_DMAINTR 21
-# define IRQ_T3UI 22 /* Timer 3 underflow */
-# define IRQ_GPIO4INTR 23 /* GPIO External IRQ Interrupt on F4 */
-# define IRQ_GPIO5INTR 24 /* GPIO External IRQ Interrupt on F5 */
-# define IRQ_GPIO6INTR 25 /* GPIO External IRQ Interrupt on F6 */
-# define IRQ_GPIO7INTR 26 /* GPIO External IRQ Interrupt on F7 */
-# define IRQ_BMIINTR 27 /* Battery Monitor Interface (BMI) */
-
-# define NR_IRQ_CPU 28 /* IRQs directly recognized by CPU */
-
- /* Given IRQ, return GPIO interrupt number 0-7 */
-# define IRQ_TO_GPIO(i) ((i) \
- - (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\
- - (((i) > IRQ_GPIO0INTR) ? IRQ_GPIO1INTR - IRQ_GPIO0INTR - 1 : 0))
-
-#endif
-
-#if defined (CONFIG_ARCH_LH7A404)
-
-# define IRQ_BROWN 0 /* Brownout */
-# define IRQ_WDTINTR 1 /* Watchdog Timer */
-# define IRQ_COMMRX 2 /* ARM Comm Rx for Debug */
-# define IRQ_COMMTX 3 /* ARM Comm Tx for Debug */
-# define IRQ_T1UI 4 /* Timer 1 underflow */
-# define IRQ_T2UI 5 /* Timer 2 underflow */
-# define IRQ_CSINT 6 /* Codec Interrupt (shared by AAC on 404) */
-# define IRQ_DMAM2P0 7 /* -- DMA Memory to Peripheral */
-# define IRQ_DMAM2P1 8
-# define IRQ_DMAM2P2 9
-# define IRQ_DMAM2P3 10
-# define IRQ_DMAM2P4 11
-# define IRQ_DMAM2P5 12
-# define IRQ_DMAM2P6 13
-# define IRQ_DMAM2P7 14
-# define IRQ_DMAM2P8 15
-# define IRQ_DMAM2P9 16
-# define IRQ_DMAM2M0 17 /* -- DMA Memory to Memory */
-# define IRQ_DMAM2M1 18
-# define IRQ_GPIO0INTR 19 /* -- GPIOF Interrupt */
-# define IRQ_GPIO1INTR 20
-# define IRQ_GPIO2INTR 21
-# define IRQ_GPIO3INTR 22
-# define IRQ_SOFT_V1_23 23 /* -- Unassigned */
-# define IRQ_SOFT_V1_24 24
-# define IRQ_SOFT_V1_25 25
-# define IRQ_SOFT_V1_26 26
-# define IRQ_SOFT_V1_27 27
-# define IRQ_SOFT_V1_28 28
-# define IRQ_SOFT_V1_29 29
-# define IRQ_SOFT_V1_30 30
-# define IRQ_SOFT_V1_31 31
-
-# define IRQ_BLINT 32 /* Battery Low */
-# define IRQ_BMIINTR 33 /* Battery Monitor */
-# define IRQ_MCINTR 34 /* Media Change */
-# define IRQ_TINTR 35 /* 64Hz Tick */
-# define IRQ_WEINT 36 /* Watchdog Expired */
-# define IRQ_RTCMI 37 /* Real-time Clock Match */
-# define IRQ_UART1INTR 38 /* UART1 Interrupt (including error) */
-# define IRQ_UART1ERR 39 /* UART1 Error */
-# define IRQ_UART2INTR 40 /* UART2 Interrupt (including error) */
-# define IRQ_UART2ERR 41 /* UART2 Error */
-# define IRQ_UART3INTR 42 /* UART3 Interrupt (including error) */
-# define IRQ_UART3ERR 43 /* UART3 Error */
-# define IRQ_SCIINTR 44 /* Smart Card */
-# define IRQ_TSCINTR 45 /* Touchscreen */
-# define IRQ_KMIINTR 46 /* Keyboard/Mouse (PS/2) */
-# define IRQ_GPIO4INTR 47 /* -- GPIOF Interrupt */
-# define IRQ_GPIO5INTR 48
-# define IRQ_GPIO6INTR 49
-# define IRQ_GPIO7INTR 50
-# define IRQ_T3UI 51 /* Timer 3 underflow */
-# define IRQ_LCDINTR 52 /* LCD Controller */
-# define IRQ_SSPINTR 53 /* Synchronous Serial Port */
-# define IRQ_SDINTR 54 /* Secure Digital Port (MMC) */
-# define IRQ_USBINTR 55 /* USB Device Port */
-# define IRQ_USHINTR 56 /* USB Host Port */
-# define IRQ_SOFT_V2_25 57 /* -- Unassigned */
-# define IRQ_SOFT_V2_26 58
-# define IRQ_SOFT_V2_27 59
-# define IRQ_SOFT_V2_28 60
-# define IRQ_SOFT_V2_29 61
-# define IRQ_SOFT_V2_30 62
-# define IRQ_SOFT_V2_31 63
-
-# define NR_IRQ_CPU 64 /* IRQs directly recognized by CPU */
-
- /* Given IRQ, return GPIO interrupt number 0-7 */
-# define IRQ_TO_GPIO(i) ((i) \
- - (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\
- - IRQ_GPIO0INTR)
-
- /* Vector Address constants */
-# define VA_VECTORED 0x100 /* Set for vectored interrupt */
-# define VA_VIC1DEFAULT 0x200 /* Set as default VECTADDR for VIC1 */
-# define VA_VIC2DEFAULT 0x400 /* Set as default VECTADDR for VIC2 */
-
-#endif
-
- /* IRQ aliases */
-
-#if !defined (IRQ_GPIO0INTR)
-# define IRQ_GPIO0INTR IRQ_GPIO0FIQ
-#endif
-#define IRQ_TICK IRQ_TINTR
-#define IRQ_PCC1_RDY IRQ_GPIO6INTR /* PCCard 1 ready */
-#define IRQ_PCC2_RDY IRQ_GPIO7INTR /* PCCard 2 ready */
-#define IRQ_USB IRQ_USBINTR /* USB device */
-
-#ifdef CONFIG_MACH_KEV7A400
-# define IRQ_TS IRQ_GPIOFIQ /* Touchscreen */
-# define IRQ_CPLD IRQ_GPIO1INTR /* CPLD cascade */
-# define IRQ_PCC1_CD IRQ_GPIO_F2 /* PCCard 1 card detect */
-# define IRQ_PCC2_CD IRQ_GPIO_F3 /* PCCard 2 card detect */
-#endif
-
-#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
-# define IRQ_CPLD_V28 IRQ_GPIO7INTR /* CPLD cascade through GPIO_PF7 */
-# define IRQ_CPLD_V34 IRQ_GPIO3INTR /* CPLD cascade through GPIO_PF3 */
-#endif
-
- /* System specific IRQs */
-
-#define IRQ_BOARD_START NR_IRQ_CPU
-
-#ifdef CONFIG_MACH_KEV7A400
-# define IRQ_KEV7A400_CPLD IRQ_BOARD_START
-# define NR_IRQ_BOARD 5
-# define IRQ_KEV7A400_MMC_CD IRQ_KEV7A400_CPLD + 0 /* MMC Card Detect */
-# define IRQ_KEV7A400_RI2 IRQ_KEV7A400_CPLD + 1 /* Ring Indicator 2 */
-# define IRQ_KEV7A400_IDE_CF IRQ_KEV7A400_CPLD + 2 /* Compact Flash (?) */
-# define IRQ_KEV7A400_ETH_INT IRQ_KEV7A400_CPLD + 3 /* Ethernet chip */
-# define IRQ_KEV7A400_INT IRQ_KEV7A400_CPLD + 4
-#endif
-
-#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
-# define IRQ_LPD7A40X_CPLD IRQ_BOARD_START
-# define NR_IRQ_BOARD 2
-# define IRQ_LPD7A40X_ETH_INT IRQ_LPD7A40X_CPLD + 0 /* Ethernet chip */
-# define IRQ_LPD7A400_TS IRQ_LPD7A40X_CPLD + 1 /* Touch screen */
-#endif
-
-#if defined (CONFIG_MACH_LPD7A400)
-# define IRQ_TOUCH IRQ_LPD7A400_TS
-#endif
-
-#define NR_IRQS (NR_IRQ_CPU + NR_IRQ_BOARD)
-
-#endif
diff --git a/arch/arm/mach-lh7a40x/include/mach/memory.h b/arch/arm/mach-lh7a40x/include/mach/memory.h
deleted file mode 100644
index edb8f5f..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/memory.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* arch/arm/mach-lh7a40x/include/mach/memory.h
- *
- * Copyright (C) 2004 Coastal Environmental Systems
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- *
- * Refer to <file:Documentation/arm/Sharp-LH/SDRAM> for more information.
- *
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET UL(0xc0000000)
-
-/*
- * Sparsemem version of the above
- */
-#define MAX_PHYSMEM_BITS 32
-#define SECTION_SIZE_BITS 24
-
-#endif
diff --git a/arch/arm/mach-lh7a40x/include/mach/registers.h b/arch/arm/mach-lh7a40x/include/mach/registers.h
deleted file mode 100644
index ea44396..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/registers.h
+++ /dev/null
@@ -1,224 +0,0 @@
-/* arch/arm/mach-lh7a40x/include/mach/registers.h
- *
- * Copyright (C) 2004 Coastal Environmental Systems
- * Copyright (C) 2004 Logic Product Development
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <mach/constants.h>
-
-#ifndef __ASM_ARCH_REGISTERS_H
-#define __ASM_ARCH_REGISTERS_H
-
-
- /* Physical register base addresses */
-
-#define AC97C_PHYS (0x80000000) /* AC97 Controller */
-#define MMC_PHYS (0x80000100) /* Multimedia Card Controller */
-#define USB_PHYS (0x80000200) /* USB Client */
-#define SCI_PHYS (0x80000300) /* Secure Card Interface */
-#define CSC_PHYS (0x80000400) /* Clock/State Controller */
-#define INTC_PHYS (0x80000500) /* Interrupt Controller */
-#define UART1_PHYS (0x80000600) /* UART1 Controller */
-#define SIR_PHYS (0x80000600) /* IR Controller, same are UART1 */
-#define UART2_PHYS (0x80000700) /* UART2 Controller */
-#define UART3_PHYS (0x80000800) /* UART3 Controller */
-#define DCDC_PHYS (0x80000900) /* DC to DC Controller */
-#define ACI_PHYS (0x80000a00) /* Audio Codec Interface */
-#define SSP_PHYS (0x80000b00) /* Synchronous ... */
-#define TIMER_PHYS (0x80000c00) /* Timer Controller */
-#define RTC_PHYS (0x80000d00) /* Real-time Clock */
-#define GPIO_PHYS (0x80000e00) /* General Purpose IO */
-#define BMI_PHYS (0x80000f00) /* Battery Monitor Interface */
-#define HRTFTC_PHYS (0x80001000) /* High-res TFT Controller (LH7A400) */
-#define ALI_PHYS (0x80001000) /* Advanced LCD Interface (LH7A404) */
-#define WDT_PHYS (0x80001400) /* Watchdog Timer */
-#define SMC_PHYS (0x80002000) /* Static Memory Controller */
-#define SDRC_PHYS (0x80002400) /* SDRAM Controller */
-#define DMAC_PHYS (0x80002800) /* DMA Controller */
-#define CLCDC_PHYS (0x80003000) /* Color LCD Controller */
-
- /* Physical registers of the LH7A404 */
-
-#define ADC_PHYS (0x80001300) /* A/D & Touchscreen Controller */
-#define VIC1_PHYS (0x80008000) /* Vectored Interrupt Controller 1 */
-#define USBH_PHYS (0x80009000) /* USB OHCI host controller */
-#define VIC2_PHYS (0x8000a000) /* Vectored Interrupt Controller 2 */
-
-/*#define KBD_PHYS (0x80000e00) */
-/*#define LCDICP_PHYS (0x80001000) */
-
-
- /* Clock/State Controller register */
-
-#define CSC_PWRSR __REG(CSC_PHYS + 0x00) /* Reset register & ID */
-#define CSC_PWRCNT __REG(CSC_PHYS + 0x04) /* Power control */
-#define CSC_CLKSET __REG(CSC_PHYS + 0x20) /* Clock speed control */
-#define CSC_USBDRESET __REG(CSC_PHYS + 0x4c) /* USB Device resets */
-
-#define CSC_PWRCNT_USBH_EN (1<<28) /* USB Host power enable */
-#define CSC_PWRCNT_DMAC_M2M1_EN (1<<27)
-#define CSC_PWRCNT_DMAC_M2M0_EN (1<<26)
-#define CSC_PWRCNT_DMAC_M2P8_EN (1<<25)
-#define CSC_PWRCNT_DMAC_M2P9_EN (1<<24)
-#define CSC_PWRCNT_DMAC_M2P6_EN (1<<23)
-#define CSC_PWRCNT_DMAC_M2P7_EN (1<<22)
-#define CSC_PWRCNT_DMAC_M2P4_EN (1<<21)
-#define CSC_PWRCNT_DMAC_M2P5_EN (1<<20)
-#define CSC_PWRCNT_DMAC_M2P2_EN (1<<19)
-#define CSC_PWRCNT_DMAC_M2P3_EN (1<<18)
-#define CSC_PWRCNT_DMAC_M2P0_EN (1<<17)
-#define CSC_PWRCNT_DMAC_M2P1_EN (1<<16)
-
-#define CSC_PWRSR_CHIPMAN_SHIFT (24)
-#define CSC_PWRSR_CHIPMAN_MASK (0xff)
-#define CSC_PWRSR_CHIPID_SHIFT (16)
-#define CSC_PWRSR_CHIPID_MASK (0xff)
-
-#define CSC_USBDRESET_APBRESETREG (1<<1)
-#define CSC_USBDRESET_IORESETREG (1<<0)
-
- /* Interrupt Controller registers */
-
-#define INTC_INTSR __REG(INTC_PHYS + 0x00) /* Status */
-#define INTC_INTRSR __REG(INTC_PHYS + 0x04) /* Raw Status */
-#define INTC_INTENS __REG(INTC_PHYS + 0x08) /* Enable Set */
-#define INTC_INTENC __REG(INTC_PHYS + 0x0c) /* Enable Clear */
-
-
- /* Vectored Interrupted Controller registers */
-
-#define VIC1_IRQSTATUS __REG(VIC1_PHYS + 0x00)
-#define VIC1_FIQSTATUS __REG(VIC1_PHYS + 0x04)
-#define VIC1_RAWINTR __REG(VIC1_PHYS + 0x08)
-#define VIC1_INTSEL __REG(VIC1_PHYS + 0x0c)
-#define VIC1_INTEN __REG(VIC1_PHYS + 0x10)
-#define VIC1_INTENCLR __REG(VIC1_PHYS + 0x14)
-#define VIC1_SOFTINT __REG(VIC1_PHYS + 0x18)
-#define VIC1_SOFTINTCLR __REG(VIC1_PHYS + 0x1c)
-#define VIC1_PROTECT __REG(VIC1_PHYS + 0x20)
-#define VIC1_VECTADDR __REG(VIC1_PHYS + 0x30)
-#define VIC1_NVADDR __REG(VIC1_PHYS + 0x34)
-#define VIC1_VAD0 __REG(VIC1_PHYS + 0x100)
-#define VIC1_VECTCNTL0 __REG(VIC1_PHYS + 0x200)
-#define VIC2_IRQSTATUS __REG(VIC2_PHYS + 0x00)
-#define VIC2_FIQSTATUS __REG(VIC2_PHYS + 0x04)
-#define VIC2_RAWINTR __REG(VIC2_PHYS + 0x08)
-#define VIC2_INTSEL __REG(VIC2_PHYS + 0x0c)
-#define VIC2_INTEN __REG(VIC2_PHYS + 0x10)
-#define VIC2_INTENCLR __REG(VIC2_PHYS + 0x14)
-#define VIC2_SOFTINT __REG(VIC2_PHYS + 0x18)
-#define VIC2_SOFTINTCLR __REG(VIC2_PHYS + 0x1c)
-#define VIC2_PROTECT __REG(VIC2_PHYS + 0x20)
-#define VIC2_VECTADDR __REG(VIC2_PHYS + 0x30)
-#define VIC2_NVADDR __REG(VIC2_PHYS + 0x34)
-#define VIC2_VAD0 __REG(VIC2_PHYS + 0x100)
-#define VIC2_VECTCNTL0 __REG(VIC2_PHYS + 0x200)
-
-#define VIC_CNTL_ENABLE (0x20)
-
- /* USB Host registers (Open HCI compatible) */
-
-#define USBH_CMDSTATUS __REG(USBH_PHYS + 0x08)
-
-
- /* GPIO registers */
-
-#define GPIO_INTTYPE1 __REG(GPIO_PHYS + 0x4c) /* Interrupt Type 1 (Edge) */
-#define GPIO_INTTYPE2 __REG(GPIO_PHYS + 0x50) /* Interrupt Type 2 */
-#define GPIO_GPIOFEOI __REG(GPIO_PHYS + 0x54) /* GPIO End-of-Interrupt */
-#define GPIO_GPIOINTEN __REG(GPIO_PHYS + 0x58) /* GPIO Interrupt Enable */
-#define GPIO_INTSTATUS __REG(GPIO_PHYS + 0x5c) /* GPIO Interrupt Status */
-#define GPIO_PINMUX __REG(GPIO_PHYS + 0x2c)
-#define GPIO_PADD __REG(GPIO_PHYS + 0x10)
-#define GPIO_PAD __REG(GPIO_PHYS + 0x00)
-#define GPIO_PCD __REG(GPIO_PHYS + 0x08)
-#define GPIO_PCDD __REG(GPIO_PHYS + 0x18)
-#define GPIO_PEDD __REG(GPIO_PHYS + 0x24)
-#define GPIO_PED __REG(GPIO_PHYS + 0x20)
-
-
- /* Static Memory Controller registers */
-
-#define SMC_BCR0 __REG(SMC_PHYS + 0x00) /* Bank 0 Configuration */
-#define SMC_BCR1 __REG(SMC_PHYS + 0x04) /* Bank 1 Configuration */
-#define SMC_BCR2 __REG(SMC_PHYS + 0x08) /* Bank 2 Configuration */
-#define SMC_BCR3 __REG(SMC_PHYS + 0x0C) /* Bank 3 Configuration */
-#define SMC_BCR6 __REG(SMC_PHYS + 0x18) /* Bank 6 Configuration */
-#define SMC_BCR7 __REG(SMC_PHYS + 0x1c) /* Bank 7 Configuration */
-
-
-#ifdef CONFIG_MACH_KEV7A400
-# define CPLD_RD_OPT_DIP_SW __REG16(CPLD_PHYS + 0x00) /* Read Option SW */
-# define CPLD_WR_IO_BRD_CTL __REG16(CPLD_PHYS + 0x00) /* Write Control */
-# define CPLD_RD_PB_KEYS __REG16(CPLD_PHYS + 0x02) /* Read Btn Keys */
-# define CPLD_LATCHED_INTS __REG16(CPLD_PHYS + 0x04) /* Read INTR stat. */
-# define CPLD_CL_INT __REG16(CPLD_PHYS + 0x04) /* Clear INTR stat */
-# define CPLD_BOOT_MMC_STATUS __REG16(CPLD_PHYS + 0x06) /* R/O */
-# define CPLD_RD_KPD_ROW_SENSE __REG16(CPLD_PHYS + 0x08)
-# define CPLD_WR_PB_INT_MASK __REG16(CPLD_PHYS + 0x08)
-# define CPLD_RD_BRD_DISP_SW __REG16(CPLD_PHYS + 0x0a)
-# define CPLD_WR_EXT_INT_MASK __REG16(CPLD_PHYS + 0x0a)
-# define CPLD_LCD_PWR_CNTL __REG16(CPLD_PHYS + 0x0c)
-# define CPLD_SEVEN_SEG __REG16(CPLD_PHYS + 0x0e) /* 7 seg. LED mask */
-
-#endif
-
-#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
-
-# define CPLD_CONTROL __REG16(CPLD02_PHYS)
-# define CPLD_SPI_DATA __REG16(CPLD06_PHYS)
-# define CPLD_SPI_CONTROL __REG16(CPLD08_PHYS)
-# define CPLD_SPI_EEPROM __REG16(CPLD0A_PHYS)
-# define CPLD_INTERRUPTS __REG16(CPLD0C_PHYS) /* IRQ mask/status */
-# define CPLD_BOOT_MODE __REG16(CPLD0E_PHYS)
-# define CPLD_FLASH __REG16(CPLD10_PHYS)
-# define CPLD_POWER_MGMT __REG16(CPLD12_PHYS)
-# define CPLD_REVISION __REG16(CPLD14_PHYS)
-# define CPLD_GPIO_EXT __REG16(CPLD16_PHYS)
-# define CPLD_GPIO_DATA __REG16(CPLD18_PHYS)
-# define CPLD_GPIO_DIR __REG16(CPLD1A_PHYS)
-
-#endif
-
- /* Timer registers */
-
-#define TIMER_LOAD1 __REG(TIMER_PHYS + 0x00) /* Timer 1 initial value */
-#define TIMER_VALUE1 __REG(TIMER_PHYS + 0x04) /* Timer 1 current value */
-#define TIMER_CONTROL1 __REG(TIMER_PHYS + 0x08) /* Timer 1 control word */
-#define TIMER_EOI1 __REG(TIMER_PHYS + 0x0c) /* Timer 1 interrupt clear */
-
-#define TIMER_LOAD2 __REG(TIMER_PHYS + 0x20) /* Timer 2 initial value */
-#define TIMER_VALUE2 __REG(TIMER_PHYS + 0x24) /* Timer 2 current value */
-#define TIMER_CONTROL2 __REG(TIMER_PHYS + 0x28) /* Timer 2 control word */
-#define TIMER_EOI2 __REG(TIMER_PHYS + 0x2c) /* Timer 2 interrupt clear */
-
-#define TIMER_BUZZCON __REG(TIMER_PHYS + 0x40) /* Buzzer configuration */
-
-#define TIMER_LOAD3 __REG(TIMER_PHYS + 0x80) /* Timer 3 initial value */
-#define TIMER_VALUE3 __REG(TIMER_PHYS + 0x84) /* Timer 3 current value */
-#define TIMER_CONTROL3 __REG(TIMER_PHYS + 0x88) /* Timer 3 control word */
-#define TIMER_EOI3 __REG(TIMER_PHYS + 0x8c) /* Timer 3 interrupt clear */
-
-#define TIMER_C_ENABLE (1<<7)
-#define TIMER_C_PERIODIC (1<<6)
-#define TIMER_C_FREERUNNING (0)
-#define TIMER_C_2KHZ (0x00) /* 1.986 kHz */
-#define TIMER_C_508KHZ (0x08)
-
- /* GPIO registers */
-
-#define GPIO_PFDD __REG(GPIO_PHYS + 0x34) /* PF direction */
-#define GPIO_INTTYPE1 __REG(GPIO_PHYS + 0x4c) /* IRQ edge or lvl */
-#define GPIO_INTTYPE2 __REG(GPIO_PHYS + 0x50) /* IRQ activ hi/lo */
-#define GPIO_GPIOFEOI __REG(GPIO_PHYS + 0x54) /* GPIOF end of IRQ */
-#define GPIO_GPIOFINTEN __REG(GPIO_PHYS + 0x58) /* GPIOF IRQ enable */
-#define GPIO_INTSTATUS __REG(GPIO_PHYS + 0x5c) /* GPIOF IRQ latch */
-#define GPIO_RAWINTSTATUS __REG(GPIO_PHYS + 0x60) /* GPIOF IRQ raw */
-
-
-#endif /* _ASM_ARCH_REGISTERS_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/ssp.h b/arch/arm/mach-lh7a40x/include/mach/ssp.h
deleted file mode 100644
index 5099161..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/ssp.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* ssp.h
-
- written by Marc Singer
- 6 Dec 2004
-
- Copyright (C) 2004 Marc Singer
-
- -----------
- DESCRIPTION
- -----------
-
- This SSP header is available throughout the kernel, for this
- machine/architecture, because drivers that use it may be dispersed.
-
- This file was cloned from the 7952x implementation. It would be
- better to share them, but we're taking an easier approach for the
- time being.
-
-*/
-
-#if !defined (__SSP_H__)
-# define __SSP_H__
-
-/* ----- Includes */
-
-/* ----- Types */
-
-struct ssp_driver {
- int (*init) (void);
- void (*exit) (void);
- void (*acquire) (void);
- void (*release) (void);
- int (*configure) (int device, int mode, int speed,
- int frame_size_write, int frame_size_read);
- void (*chip_select) (int enable);
- void (*set_callbacks) (void* handle,
- irqreturn_t (*callback_tx)(void*),
- irqreturn_t (*callback_rx)(void*));
- void (*enable) (void);
- void (*disable) (void);
-// int (*save_state) (void*);
-// void (*restore_state) (void*);
- int (*read) (void);
- int (*write) (u16 data);
- int (*write_read) (u16 data);
- void (*flush) (void);
- void (*write_async) (void* pv, size_t cb);
- size_t (*write_pos) (void);
-};
-
- /* These modes are only available on the LH79524 */
-#define SSP_MODE_SPI (1)
-#define SSP_MODE_SSI (2)
-#define SSP_MODE_MICROWIRE (3)
-#define SSP_MODE_I2S (4)
-
- /* CPLD SPI devices */
-#define DEVICE_EEPROM 0 /* Configuration eeprom */
-#define DEVICE_MAC 1 /* MAC eeprom (LPD79524) */
-#define DEVICE_CODEC 2 /* Audio codec */
-#define DEVICE_TOUCH 3 /* Touch screen (LPD79520) */
-
-/* ----- Globals */
-
-/* ----- Prototypes */
-
-//extern struct ssp_driver lh79520_i2s_driver;
-extern struct ssp_driver lh7a400_cpld_ssp_driver;
-
-#endif /* __SSP_H__ */
diff --git a/arch/arm/mach-lh7a40x/include/mach/system.h b/arch/arm/mach-lh7a40x/include/mach/system.h
deleted file mode 100644
index 45a56d3..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* arch/arm/mach-lh7a40x/include/mach/system.h
- *
- * Copyright (C) 2004 Coastal Environmental Systems
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-static inline void arch_idle(void)
-{
- cpu_do_idle ();
-}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- cpu_reset (0);
-}
diff --git a/arch/arm/mach-lh7a40x/include/mach/timex.h b/arch/arm/mach-lh7a40x/include/mach/timex.h
deleted file mode 100644
index 08028ce..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/timex.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* arch/arm/mach-lh7a40x/include/mach/timex.h
- *
- * Copyright (C) 2004 Coastal Environmental Systems
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <mach/constants.h>
-
-#define CLOCK_TICK_RATE (PLL_CLOCK/6/16)
-
-/*
-#define CLOCK_TICK_RATE 3686400
-*/
diff --git a/arch/arm/mach-lh7a40x/include/mach/uncompress.h b/arch/arm/mach-lh7a40x/include/mach/uncompress.h
deleted file mode 100644
index 55b80d4..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/uncompress.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* arch/arm/mach-lh7a40x/include/mach/uncompress.h
- *
- * Copyright (C) 2004 Coastal Environmental Systems
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <mach/registers.h>
-
-#ifndef UART_R_DATA
-# define UART_R_DATA (0x00)
-#endif
-#ifndef UART_R_STATUS
-# define UART_R_STATUS (0x10)
-#endif
-#define nTxRdy (0x20) /* Not TxReady (literally Tx FIFO full) */
-
- /* Access UART with physical addresses before MMU is setup */
-#define UART_STATUS (*(volatile unsigned long*) (UART2_PHYS + UART_R_STATUS))
-#define UART_DATA (*(volatile unsigned long*) (UART2_PHYS + UART_R_DATA))
-
-static inline void putc(int ch)
-{
- while (UART_STATUS & nTxRdy)
- barrier();
- UART_DATA = ch;
-}
-
-static inline void flush(void)
-{
-}
-
- /* NULL functions; we don't presently need them */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-lh7a40x/include/mach/vmalloc.h b/arch/arm/mach-lh7a40x/include/mach/vmalloc.h
deleted file mode 100644
index d62da73..0000000
--- a/arch/arm/mach-lh7a40x/include/mach/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* arch/arm/mach-lh7a40x/include/mach/vmalloc.h
- *
- * Copyright (C) 2004 Coastal Environmental Systems
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-#define VMALLOC_END (0xe8000000UL)
diff --git a/arch/arm/mach-lh7a40x/irq-kev7a400.c b/arch/arm/mach-lh7a40x/irq-kev7a400.c
deleted file mode 100644
index c7433b3..0000000
--- a/arch/arm/mach-lh7a40x/irq-kev7a400.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/* arch/arm/mach-lh7a40x/irq-kev7a400.c
- *
- * Copyright (C) 2004 Coastal Environmental Systems
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <linux/interrupt.h>
-#include <linux/init.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/hardware.h>
-#include <asm/mach/irqs.h>
-
-#include "common.h"
-
- /* KEV7a400 CPLD IRQ handling */
-
-static u16 CPLD_IRQ_mask; /* Mask for CPLD IRQs, 1 == unmasked */
-
-static void
-lh7a400_ack_cpld_irq (u32 irq)
-{
- CPLD_CL_INT = 1 << (irq - IRQ_KEV7A400_CPLD);
-}
-
-static void
-lh7a400_mask_cpld_irq (u32 irq)
-{
- CPLD_IRQ_mask &= ~(1 << (irq - IRQ_KEV7A400_CPLD));
- CPLD_WR_PB_INT_MASK = CPLD_IRQ_mask;
-}
-
-static void
-lh7a400_unmask_cpld_irq (u32 irq)
-{
- CPLD_IRQ_mask |= 1 << (irq - IRQ_KEV7A400_CPLD);
- CPLD_WR_PB_INT_MASK = CPLD_IRQ_mask;
-}
-
-static struct
-irq_chip lh7a400_cpld_chip = {
- .name = "CPLD",
- .ack = lh7a400_ack_cpld_irq,
- .mask = lh7a400_mask_cpld_irq,
- .unmask = lh7a400_unmask_cpld_irq,
-};
-
-static void
-lh7a400_cpld_handler (unsigned int irq, struct irq_desc *desc)
-{
- u32 mask = CPLD_LATCHED_INTS;
- irq = IRQ_KEV_7A400_CPLD;
- for (; mask; mask >>= 1, ++irq) {
- if (mask & 1)
- desc[irq].handle (irq, desc);
- }
-}
-
- /* IRQ initialization */
-
-void __init
-lh7a400_init_board_irq (void)
-{
- int irq;
-
- for (irq = IRQ_KEV7A400_CPLD;
- irq < IRQ_KEV7A400_CPLD + NR_IRQ_KEV7A400_CPLD; ++irq) {
- set_irq_chip (irq, &lh7a400_cpld_chip);
- set_irq_handler (irq, handle_edge_irq);
- set_irq_flags (irq, IRQF_VALID);
- }
- set_irq_chained_handler (IRQ_CPLD, kev7a400_cpld_handler);
-
- /* Clear all CPLD interrupts */
- CPLD_CL_INT = 0xff; /* CPLD_INTR_MMC_CD | CPLD_INTR_ETH_INT; */
-
- /* *** FIXME CF enabled in ide-probe.c */
-
- GPIO_GPIOINTEN = 0; /* Disable all GPIO interrupts */
- barrier();
- GPIO_INTTYPE1
- = (GPIO_INTR_PCC1_CD | GPIO_INTR_PCC1_CD); /* Edge trig. */
- GPIO_INTTYPE2 = 0; /* Falling edge & low-level */
- GPIO_GPIOFEOI = 0xff; /* Clear all GPIO interrupts */
- GPIO_GPIOINTEN = 0xff; /* Enable all GPIO interrupts */
-
- init_FIQ();
-}
diff --git a/arch/arm/mach-lh7a40x/irq-lh7a400.c b/arch/arm/mach-lh7a40x/irq-lh7a400.c
deleted file mode 100644
index f2e7e65..0000000
--- a/arch/arm/mach-lh7a40x/irq-lh7a400.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/* arch/arm/mach-lh7a40x/irq-lh7a400.c
- *
- * Copyright (C) 2004 Coastal Environmental Systems
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-#include <mach/irqs.h>
-
-#include "common.h"
-
- /* CPU IRQ handling */
-
-static void lh7a400_mask_irq(struct irq_data *d)
-{
- INTC_INTENC = (1 << d->irq);
-}
-
-static void lh7a400_unmask_irq(struct irq_data *d)
-{
- INTC_INTENS = (1 << d->irq);
-}
-
-static void lh7a400_ack_gpio_irq(struct irq_data *d)
-{
- GPIO_GPIOFEOI = (1 << IRQ_TO_GPIO (d->irq));
- INTC_INTENC = (1 << d->irq);
-}
-
-static struct irq_chip lh7a400_internal_chip = {
- .name = "MPU",
- .irq_ack = lh7a400_mask_irq, /* Level triggering -> mask is ack */
- .irq_mask = lh7a400_mask_irq,
- .irq_unmask = lh7a400_unmask_irq,
-};
-
-static struct irq_chip lh7a400_gpio_chip = {
- .name = "GPIO",
- .irq_ack = lh7a400_ack_gpio_irq,
- .irq_mask = lh7a400_mask_irq,
- .irq_unmask = lh7a400_unmask_irq,
-};
-
-
- /* IRQ initialization */
-
-void __init lh7a400_init_irq (void)
-{
- int irq;
-
- INTC_INTENC = 0xffffffff; /* Disable all interrupts */
- GPIO_GPIOFINTEN = 0x00; /* Disable all GPIOF interrupts */
- barrier ();
-
- for (irq = 0; irq < NR_IRQS; ++irq) {
- switch (irq) {
- case IRQ_GPIO0INTR:
- case IRQ_GPIO1INTR:
- case IRQ_GPIO2INTR:
- case IRQ_GPIO3INTR:
- case IRQ_GPIO4INTR:
- case IRQ_GPIO5INTR:
- case IRQ_GPIO6INTR:
- case IRQ_GPIO7INTR:
- set_irq_chip (irq, &lh7a400_gpio_chip);
- set_irq_handler (irq, handle_level_irq); /* OK default */
- break;
- default:
- set_irq_chip (irq, &lh7a400_internal_chip);
- set_irq_handler (irq, handle_level_irq);
- }
- set_irq_flags (irq, IRQF_VALID);
- }
-
- lh7a40x_init_board_irq ();
-
-/* *** FIXME: the LH7a400 does use FIQ interrupts in some cases. For
- the time being, these are not initialized. */
-
-/* init_FIQ(); */
-}
diff --git a/arch/arm/mach-lh7a40x/irq-lh7a404.c b/arch/arm/mach-lh7a40x/irq-lh7a404.c
deleted file mode 100644
index 14b1733..0000000
--- a/arch/arm/mach-lh7a40x/irq-lh7a404.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/* arch/arm/mach-lh7a40x/irq-lh7a404.c
- *
- * Copyright (C) 2004 Logic Product Development
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-#include <mach/irqs.h>
-
-#include "common.h"
-
-#define USE_PRIORITIES
-
-/* See Documentation/arm/Sharp-LH/VectoredInterruptController for more
- * information on using the vectored interrupt controller's
- * prioritizing feature. */
-
-static unsigned char irq_pri_vic1[] = {
-#if defined (USE_PRIORITIES)
- IRQ_GPIO3INTR, /* CPLD */
- IRQ_DMAM2P4, IRQ_DMAM2P5, /* AC97 */
-#endif
-};
-static unsigned char irq_pri_vic2[] = {
-#if defined (USE_PRIORITIES)
- IRQ_T3UI, /* Timer */
- IRQ_GPIO7INTR, /* CPLD */
- IRQ_UART1INTR, IRQ_UART2INTR, IRQ_UART3INTR,
- IRQ_LCDINTR, /* LCD */
- IRQ_TSCINTR, /* ADC/Touchscreen */
-#endif
-};
-
- /* CPU IRQ handling */
-
-static void lh7a404_vic1_mask_irq(struct irq_data *d)
-{
- VIC1_INTENCLR = (1 << d->irq);
-}
-
-static void lh7a404_vic1_unmask_irq(struct irq_data *d)
-{
- VIC1_INTEN = (1 << d->irq);
-}
-
-static void lh7a404_vic2_mask_irq(struct irq_data *d)
-{
- VIC2_INTENCLR = (1 << (d->irq - 32));
-}
-
-static void lh7a404_vic2_unmask_irq(struct irq_data *d)
-{
- VIC2_INTEN = (1 << (d->irq - 32));
-}
-
-static void lh7a404_vic1_ack_gpio_irq(struct irq_data *d)
-{
- GPIO_GPIOFEOI = (1 << IRQ_TO_GPIO (d->irq));
- VIC1_INTENCLR = (1 << d->irq);
-}
-
-static void lh7a404_vic2_ack_gpio_irq(struct irq_data *d)
-{
- GPIO_GPIOFEOI = (1 << IRQ_TO_GPIO (d->irq));
- VIC2_INTENCLR = (1 << d->irq);
-}
-
-static struct irq_chip lh7a404_vic1_chip = {
- .name = "VIC1",
- .irq_ack = lh7a404_vic1_mask_irq, /* Because level-triggered */
- .irq_mask = lh7a404_vic1_mask_irq,
- .irq_unmask = lh7a404_vic1_unmask_irq,
-};
-
-static struct irq_chip lh7a404_vic2_chip = {
- .name = "VIC2",
- .irq_ack = lh7a404_vic2_mask_irq, /* Because level-triggered */
- .irq_mask = lh7a404_vic2_mask_irq,
- .irq_unmask = lh7a404_vic2_unmask_irq,
-};
-
-static struct irq_chip lh7a404_gpio_vic1_chip = {
- .name = "GPIO-VIC1",
- .irq_ack = lh7a404_vic1_ack_gpio_irq,
- .irq_mask = lh7a404_vic1_mask_irq,
- .irq_unmask = lh7a404_vic1_unmask_irq,
-};
-
-static struct irq_chip lh7a404_gpio_vic2_chip = {
- .name = "GPIO-VIC2",
- .irq_ack = lh7a404_vic2_ack_gpio_irq,
- .irq_mask = lh7a404_vic2_mask_irq,
- .irq_unmask = lh7a404_vic2_unmask_irq,
-};
-
- /* IRQ initialization */
-
-#if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404)
-extern void* branch_irq_lh7a400;
-#endif
-
-void __init lh7a404_init_irq (void)
-{
- int irq;
-
-#if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404)
-#define NOP 0xe1a00000 /* mov r0, r0 */
- branch_irq_lh7a400 = NOP;
-#endif
-
- VIC1_INTENCLR = 0xffffffff;
- VIC2_INTENCLR = 0xffffffff;
- VIC1_INTSEL = 0; /* All IRQs */
- VIC2_INTSEL = 0; /* All IRQs */
- VIC1_NVADDR = VA_VIC1DEFAULT;
- VIC2_NVADDR = VA_VIC2DEFAULT;
- VIC1_VECTADDR = 0;
- VIC2_VECTADDR = 0;
-
- GPIO_GPIOFINTEN = 0x00; /* Disable all GPIOF interrupts */
- barrier ();
-
- /* Install prioritized interrupts, if there are any. */
- /* The | 0x20*/
- for (irq = 0; irq < 16; ++irq) {
- (&VIC1_VAD0)[irq]
- = (irq < ARRAY_SIZE (irq_pri_vic1))
- ? (irq_pri_vic1[irq] | VA_VECTORED) : 0;
- (&VIC1_VECTCNTL0)[irq]
- = (irq < ARRAY_SIZE (irq_pri_vic1))
- ? (irq_pri_vic1[irq] | VIC_CNTL_ENABLE) : 0;
- (&VIC2_VAD0)[irq]
- = (irq < ARRAY_SIZE (irq_pri_vic2))
- ? (irq_pri_vic2[irq] | VA_VECTORED) : 0;
- (&VIC2_VECTCNTL0)[irq]
- = (irq < ARRAY_SIZE (irq_pri_vic2))
- ? (irq_pri_vic2[irq] | VIC_CNTL_ENABLE) : 0;
- }
-
- for (irq = 0; irq < NR_IRQS; ++irq) {
- switch (irq) {
- case IRQ_GPIO0INTR:
- case IRQ_GPIO1INTR:
- case IRQ_GPIO2INTR:
- case IRQ_GPIO3INTR:
- case IRQ_GPIO4INTR:
- case IRQ_GPIO5INTR:
- case IRQ_GPIO6INTR:
- case IRQ_GPIO7INTR:
- set_irq_chip (irq, irq < 32
- ? &lh7a404_gpio_vic1_chip
- : &lh7a404_gpio_vic2_chip);
- set_irq_handler (irq, handle_level_irq); /* OK default */
- break;
- default:
- set_irq_chip (irq, irq < 32
- ? &lh7a404_vic1_chip
- : &lh7a404_vic2_chip);
- set_irq_handler (irq, handle_level_irq);
- }
- set_irq_flags (irq, IRQF_VALID);
- }
-
- lh7a40x_init_board_irq ();
-}
diff --git a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
deleted file mode 100644
index 1bfdcdd..0000000
--- a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/* arch/arm/mach-lh7a40x/irq-lpd7a40x.c
- *
- * Copyright (C) 2004 Coastal Environmental Systems
- * Copyright (C) 2004 Logic Product Development
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-#include <mach/irqs.h>
-
-#include "common.h"
-
-static void lh7a40x_ack_cpld_irq(struct irq_data *d)
-{
- /* CPLD doesn't have ack capability */
-}
-
-static void lh7a40x_mask_cpld_irq(struct irq_data *d)
-{
- switch (d->irq) {
- case IRQ_LPD7A40X_ETH_INT:
- CPLD_INTERRUPTS = CPLD_INTERRUPTS | 0x4;
- break;
- case IRQ_LPD7A400_TS:
- CPLD_INTERRUPTS = CPLD_INTERRUPTS | 0x8;
- break;
- }
-}
-
-static void lh7a40x_unmask_cpld_irq(struct irq_data *d)
-{
- switch (d->irq) {
- case IRQ_LPD7A40X_ETH_INT:
- CPLD_INTERRUPTS = CPLD_INTERRUPTS & ~ 0x4;
- break;
- case IRQ_LPD7A400_TS:
- CPLD_INTERRUPTS = CPLD_INTERRUPTS & ~ 0x8;
- break;
- }
-}
-
-static struct irq_chip lh7a40x_cpld_chip = {
- .name = "CPLD",
- .irq_ack = lh7a40x_ack_cpld_irq,
- .irq_mask = lh7a40x_mask_cpld_irq,
- .irq_unmask = lh7a40x_unmask_cpld_irq,
-};
-
-static void lh7a40x_cpld_handler (unsigned int irq, struct irq_desc *desc)
-{
- unsigned int mask = CPLD_INTERRUPTS;
-
- desc->irq_data.chip->ack (irq);
-
- if ((mask & 0x1) == 0) /* WLAN */
- generic_handle_irq(IRQ_LPD7A40X_ETH_INT);
-
- if ((mask & 0x2) == 0) /* Touch */
- generic_handle_irq(IRQ_LPD7A400_TS);
-
- desc->irq_data.chip->unmask (irq); /* Level-triggered need this */
-}
-
-
- /* IRQ initialization */
-
-void __init lh7a40x_init_board_irq (void)
-{
- int irq;
-
- /* Rev A (v2.8): PF0, PF1, PF2, and PF3 are available IRQs.
- PF7 supports the CPLD.
- Rev B (v3.4): PF0, PF1, and PF2 are available IRQs.
- PF3 supports the CPLD.
- (Some) LPD7A404 prerelease boards report a version
- number of 0x16, but we force an override since the
- hardware is of the newer variety.
- */
-
- unsigned char cpld_version = CPLD_REVISION;
- int pinCPLD;
-
-#if defined CONFIG_MACH_LPD7A404
- cpld_version = 0x34; /* Override, for now */
-#endif
- pinCPLD = (cpld_version == 0x28) ? 7 : 3;
-
- /* First, configure user controlled GPIOF interrupts */
-
- GPIO_PFDD &= ~0x0f; /* PF0-3 are inputs */
- GPIO_INTTYPE1 &= ~0x0f; /* PF0-3 are level triggered */
- GPIO_INTTYPE2 &= ~0x0f; /* PF0-3 are active low */
- barrier ();
- GPIO_GPIOFINTEN |= 0x0f; /* Enable PF0, PF1, PF2, and PF3 IRQs */
-
- /* Then, configure CPLD interrupt */
-
- CPLD_INTERRUPTS = 0x0c; /* Disable all CPLD interrupts */
- GPIO_PFDD &= ~(1 << pinCPLD); /* Make input */
- GPIO_INTTYPE1 |= (1 << pinCPLD); /* Edge triggered */
- GPIO_INTTYPE2 &= ~(1 << pinCPLD); /* Active low */
- barrier ();
- GPIO_GPIOFINTEN |= (1 << pinCPLD); /* Enable */
-
- /* Cascade CPLD interrupts */
-
- for (irq = IRQ_BOARD_START;
- irq < IRQ_BOARD_START + NR_IRQ_BOARD; ++irq) {
- set_irq_chip (irq, &lh7a40x_cpld_chip);
- set_irq_handler (irq, handle_edge_irq);
- set_irq_flags (irq, IRQF_VALID);
- }
-
- set_irq_chained_handler ((cpld_version == 0x28)
- ? IRQ_CPLD_V28
- : IRQ_CPLD_V34,
- lh7a40x_cpld_handler);
-}
diff --git a/arch/arm/mach-lh7a40x/lcd-panel.h b/arch/arm/mach-lh7a40x/lcd-panel.h
deleted file mode 100644
index a7f5027..0000000
--- a/arch/arm/mach-lh7a40x/lcd-panel.h
+++ /dev/null
@@ -1,345 +0,0 @@
-/* lcd-panel.h
-
- written by Marc Singer
- 18 Jul 2005
-
- Copyright (C) 2005 Marc Singer
-
- -----------
- DESCRIPTION
- -----------
-
- Only one panel may be defined at a time.
-
- The pixel clock is calculated to be no greater than the target.
-
- Each timing value is accompanied by a specification comment.
-
- UNITS/MIN/TYP/MAX
-
- Most of the units will be in clocks.
-
- USE_RGB555
-
- Define this macro to configure the AMBA LCD controller to use an
- RGB555 encoding for the pels instead of the normal RGB565.
-
- LPD9520, LPD79524, LPD7A400, LPD7A404-10, LPD7A404-11
-
- These boards are best approximated by 555 for all panels. Some
- can use an extra low-order bit of blue in bit 16 of the color
- value, but we don't have a way to communicate this non-linear
- mapping to the kernel.
-
-*/
-
-#if !defined (__LCD_PANEL_H__)
-# define __LCD_PANEL_H__
-
-#if defined (MACH_LPD79520)\
- || defined (MACH_LPD79524)\
- || defined (MACH_LPD7A400)\
- || defined (MACH_LPD7A404)
-# define USE_RGB555
-#endif
-
-struct clcd_panel_extra {
- unsigned int hrmode;
- unsigned int clsen;
- unsigned int spsen;
- unsigned int pcdel;
- unsigned int revdel;
- unsigned int lpdel;
- unsigned int spldel;
- unsigned int pc2del;
-};
-
-#define NS_TO_CLOCK(ns,c) ((((ns)*((c)/1000) + (1000000 - 1))/1000000))
-#define CLOCK_TO_DIV(e,c) (((c) + (e) - 1)/(e))
-
-#if defined CONFIG_FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT
-
- /* Logic Product Development LCD 3.5" QVGA HRTFT -10 */
- /* Sharp PN LQ035Q7DB02 w/HRTFT controller chip */
-
-#define PIX_CLOCK_TARGET (6800000)
-#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
-#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER)
-
-static struct clcd_panel lcd_panel = {
- .mode = {
- .name = "3.5in QVGA (LQ035Q7DB02)",
- .xres = 240,
- .yres = 320,
- .pixclock = PIX_CLOCK,
- .left_margin = 16,
- .right_margin = 21,
- .upper_margin = 8, // line/8/8/8
- .lower_margin = 5,
- .hsync_len = 61,
- .vsync_len = NS_TO_CLOCK (60, PIX_CLOCK),
- .vmode = FB_VMODE_NONINTERLACED,
- },
- .width = -1,
- .height = -1,
- .tim2 = TIM2_IPC | (PIX_CLOCK_DIVIDER - 2),
- .cntl = CNTL_LCDTFT | CNTL_WATERMARK,
- .bpp = 16,
-};
-
-#define HAS_LCD_PANEL_EXTRA
-
-static struct clcd_panel_extra lcd_panel_extra = {
- .hrmode = 1,
- .clsen = 1,
- .spsen = 1,
- .pcdel = 8,
- .revdel = 7,
- .lpdel = 13,
- .spldel = 77,
- .pc2del = 208,
-};
-
-#endif
-
-#if defined CONFIG_FB_ARMCLCD_SHARP_LQ057Q3DC02
-
- /* Logic Product Development LCD 5.7" QVGA -10 */
- /* Sharp PN LQ057Q3DC02 */
- /* QVGA mode, V/Q=LOW */
-
-/* From Sharp on 2006.1.3. I believe some of the values are incorrect
- * based on the datasheet.
-
- Timing0 TIMING1 TIMING2 CONTROL
- 0x140A0C4C 0x080504EF 0x013F380D 0x00000829
- HBP= 20 VBP= 8 BCD= 0
- HFP= 10 VFP= 5 CPL=319
- HSW= 12 VSW= 1 IOE= 0
- PPL= 19 LPP=239 IPC= 1
- IHS= 1
- IVS= 1
- ACB= 0
- CSEL= 0
- PCD= 13
-
- */
-
-/* The full horizontal cycle (Th) is clock/360/400/450. */
-/* The full vertical cycle (Tv) is line/251/262/280. */
-
-#define PIX_CLOCK_TARGET (6300000) /* -/6.3/7 MHz */
-#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
-#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER)
-
-static struct clcd_panel lcd_panel = {
- .mode = {
- .name = "5.7in QVGA (LQ057Q3DC02)",
- .xres = 320,
- .yres = 240,
- .pixclock = PIX_CLOCK,
- .left_margin = 11,
- .right_margin = 400-11-320-2,
- .upper_margin = 7, // line/7/7/7
- .lower_margin = 262-7-240-2,
- .hsync_len = 2, // clk/2/96/200
- .vsync_len = 2, // line/2/-/34
- .vmode = FB_VMODE_NONINTERLACED,
- },
- .width = -1,
- .height = -1,
- .tim2 = TIM2_IHS | TIM2_IVS
- | (PIX_CLOCK_DIVIDER - 2),
- .cntl = CNTL_LCDTFT | CNTL_WATERMARK,
- .bpp = 16,
-};
-
-#endif
-
-#if defined CONFIG_FB_ARMCLCD_SHARP_LQ64D343
-
- /* Logic Product Development LCD 6.4" VGA -10 */
- /* Sharp PN LQ64D343 */
-
-/* The full horizontal cycle (Th) is clock/750/800/900. */
-/* The full vertical cycle (Tv) is line/515/525/560. */
-
-#define PIX_CLOCK_TARGET (28330000)
-#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
-#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER)
-
-static struct clcd_panel lcd_panel = {
- .mode = {
- .name = "6.4in QVGA (LQ64D343)",
- .xres = 640,
- .yres = 480,
- .pixclock = PIX_CLOCK,
- .left_margin = 32,
- .right_margin = 800-32-640-96,
- .upper_margin = 32, // line/34/34/34
- .lower_margin = 540-32-480-2,
- .hsync_len = 96, // clk/2/96/200
- .vsync_len = 2, // line/2/-/34
- .vmode = FB_VMODE_NONINTERLACED,
- },
- .width = -1,
- .height = -1,
- .tim2 = TIM2_IHS | TIM2_IVS
- | (PIX_CLOCK_DIVIDER - 2),
- .cntl = CNTL_LCDTFT | CNTL_WATERMARK,
- .bpp = 16,
-};
-
-#endif
-
-#if defined CONFIG_FB_ARMCLCD_SHARP_LQ10D368
-
- /* Logic Product Development LCD 10.4" VGA -10 */
- /* Sharp PN LQ10D368 */
-
-#define PIX_CLOCK_TARGET (28330000)
-#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
-#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER)
-
-static struct clcd_panel lcd_panel = {
- .mode = {
- .name = "10.4in VGA (LQ10D368)",
- .xres = 640,
- .yres = 480,
- .pixclock = PIX_CLOCK,
- .left_margin = 21,
- .right_margin = 15,
- .upper_margin = 34,
- .lower_margin = 5,
- .hsync_len = 96,
- .vsync_len = 16,
- .vmode = FB_VMODE_NONINTERLACED,
- },
- .width = -1,
- .height = -1,
- .tim2 = TIM2_IHS | TIM2_IVS
- | (PIX_CLOCK_DIVIDER - 2),
- .cntl = CNTL_LCDTFT | CNTL_WATERMARK,
- .bpp = 16,
-};
-
-#endif
-
-#if defined CONFIG_FB_ARMCLCD_SHARP_LQ121S1DG41
-
- /* Logic Product Development LCD 12.1" SVGA -10 */
- /* Sharp PN LQ121S1DG41, was LQ121S1DG31 */
-
-/* Note that with a 99993900 Hz HCLK, it is not possible to hit the
- * target clock frequency range of 35MHz to 42MHz. */
-
-/* If the target pixel clock is substantially lower than the panel
- * spec, this is done to prevent the LCD display from glitching when
- * the CPU is under load. A pixel clock higher than 25MHz
- * (empirically determined) will compete with the CPU for bus cycles
- * for the Ethernet chip. However, even a pixel clock of 10MHz
- * competes with Compact Flash interface during some operations
- * (fdisk, e2fsck). And, at that speed the display may have a visible
- * flicker. */
-
-/* The full horizontal cycle (Th) is clock/832/1056/1395. */
-
-#define PIX_CLOCK_TARGET (20000000)
-#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
-#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER)
-
-static struct clcd_panel lcd_panel = {
- .mode = {
- .name = "12.1in SVGA (LQ121S1DG41)",
- .xres = 800,
- .yres = 600,
- .pixclock = PIX_CLOCK,
- .left_margin = 89, // ns/5/-/(1/PIX_CLOCK)-10
- .right_margin = 1056-800-89-128,
- .upper_margin = 23, // line/23/23/23
- .lower_margin = 44,
- .hsync_len = 128, // clk/2/128/200
- .vsync_len = 4, // line/2/4/6
- .vmode = FB_VMODE_NONINTERLACED,
- },
- .width = -1,
- .height = -1,
- .tim2 = TIM2_IHS | TIM2_IVS
- | (PIX_CLOCK_DIVIDER - 2),
- .cntl = CNTL_LCDTFT | CNTL_WATERMARK,
- .bpp = 16,
-};
-
-#endif
-
-#if defined CONFIG_FB_ARMCLCD_HITACHI
-
- /* Hitachi*/
- /* Submitted by Michele Da Rold <michele.darold@ecsproject.com> */
-
-#define PIX_CLOCK_TARGET (49000000)
-#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
-#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER)
-
-static struct clcd_panel lcd_panel = {
- .mode = {
- .name = "Hitachi 800x480",
- .xres = 800,
- .yres = 480,
- .pixclock = PIX_CLOCK,
- .left_margin = 88,
- .right_margin = 40,
- .upper_margin = 32,
- .lower_margin = 11,
- .hsync_len = 128,
- .vsync_len = 2,
- .vmode = FB_VMODE_NONINTERLACED,
- },
- .width = -1,
- .height = -1,
- .tim2 = TIM2_IPC | TIM2_IHS | TIM2_IVS
- | (PIX_CLOCK_DIVIDER - 2),
- .cntl = CNTL_LCDTFT | CNTL_WATERMARK,
- .bpp = 16,
-};
-
-#endif
-
-
-#if defined CONFIG_FB_ARMCLCD_AUO_A070VW01_WIDE
-
- /* AU Optotronics A070VW01 7.0 Wide Screen color Display*/
- /* Submitted by Michele Da Rold <michele.darold@ecsproject.com> */
-
-#define PIX_CLOCK_TARGET (10000000)
-#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
-#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER)
-
-static struct clcd_panel lcd_panel = {
- .mode = {
- .name = "7.0in Wide (A070VW01)",
- .xres = 480,
- .yres = 234,
- .pixclock = PIX_CLOCK,
- .left_margin = 30,
- .right_margin = 25,
- .upper_margin = 14,
- .lower_margin = 12,
- .hsync_len = 100,
- .vsync_len = 1,
- .vmode = FB_VMODE_NONINTERLACED,
- },
- .width = -1,
- .height = -1,
- .tim2 = TIM2_IPC | TIM2_IHS | TIM2_IVS
- | (PIX_CLOCK_DIVIDER - 2),
- .cntl = CNTL_LCDTFT | CNTL_WATERMARK,
- .bpp = 16,
-};
-
-#endif
-
-#undef NS_TO_CLOCK
-#undef CLOCK_TO_DIV
-
-#endif /* __LCD_PANEL_H__ */
diff --git a/arch/arm/mach-lh7a40x/ssp-cpld.c b/arch/arm/mach-lh7a40x/ssp-cpld.c
deleted file mode 100644
index 2901d49..0000000
--- a/arch/arm/mach-lh7a40x/ssp-cpld.c
+++ /dev/null
@@ -1,343 +0,0 @@
-/* arch/arm/mach-lh7a40x/ssp-cpld.c
- *
- * Copyright (C) 2004,2005 Marc Singer
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * SSP/SPI driver for the CardEngine CPLD.
- *
- */
-
-/* NOTES
- -----
-
- o *** This driver is cribbed from the 7952x implementation.
- Some comments may not apply.
-
- o This driver contains sufficient logic to control either the
- serial EEPROMs or the audio codec. It is included in the kernel
- to support the codec. The EEPROMs are really the responsibility
- of the boot loader and should probably be left alone.
-
- o The code must be augmented to cope with multiple, simultaneous
- clients.
- o The audio codec writes to the codec chip whenever playback
- starts.
- o The touchscreen driver writes to the ads chip every time it
- samples.
- o The audio codec must write 16 bits, but the touch chip writes
- are 8 bits long.
- o We need to be able to keep these configurations separate while
- simultaneously active.
-
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-//#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-//#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-#include <mach/ssp.h>
-
-//#define TALK
-
-#if defined (TALK)
-#define PRINTK(f...) printk (f)
-#else
-#define PRINTK(f...) do {} while (0)
-#endif
-
-#if defined (CONFIG_ARCH_LH7A400)
-# define CPLD_SPID __REGP16(CPLD06_VIRT) /* SPI data */
-# define CPLD_SPIC __REGP16(CPLD08_VIRT) /* SPI control */
-# define CPLD_SPIC_CS_CODEC (1<<0)
-# define CPLD_SPIC_CS_TOUCH (1<<1)
-# define CPLD_SPIC_WRITE (0<<2)
-# define CPLD_SPIC_READ (1<<2)
-# define CPLD_SPIC_DONE (1<<3) /* r/o */
-# define CPLD_SPIC_LOAD (1<<4)
-# define CPLD_SPIC_START (1<<4)
-# define CPLD_SPIC_LOADED (1<<5) /* r/o */
-#endif
-
-#define CPLD_SPI __REGP16(CPLD0A_VIRT) /* SPI operation */
-#define CPLD_SPI_CS_EEPROM (1<<3)
-#define CPLD_SPI_SCLK (1<<2)
-#define CPLD_SPI_TX_SHIFT (1)
-#define CPLD_SPI_TX (1<<CPLD_SPI_TX_SHIFT)
-#define CPLD_SPI_RX_SHIFT (0)
-#define CPLD_SPI_RX (1<<CPLD_SPI_RX_SHIFT)
-
-/* *** FIXME: these timing values are substantially larger than the
- *** chip requires. We may implement an nsleep () function. */
-#define T_SKH 1 /* Clock time high (us) */
-#define T_SKL 1 /* Clock time low (us) */
-#define T_CS 1 /* Minimum chip select low time (us) */
-#define T_CSS 1 /* Minimum chip select setup time (us) */
-#define T_DIS 1 /* Data setup time (us) */
-
- /* EEPROM SPI bits */
-#define P_START (1<<9)
-#define P_WRITE (1<<7)
-#define P_READ (2<<7)
-#define P_ERASE (3<<7)
-#define P_EWDS (0<<7)
-#define P_WRAL (0<<7)
-#define P_ERAL (0<<7)
-#define P_EWEN (0<<7)
-#define P_A_EWDS (0<<5)
-#define P_A_WRAL (1<<5)
-#define P_A_ERAL (2<<5)
-#define P_A_EWEN (3<<5)
-
-struct ssp_configuration {
- int device;
- int mode;
- int speed;
- int frame_size_write;
- int frame_size_read;
-};
-
-static struct ssp_configuration ssp_configuration;
-static spinlock_t ssp_lock;
-
-static void enable_cs (void)
-{
- switch (ssp_configuration.device) {
- case DEVICE_EEPROM:
- CPLD_SPI |= CPLD_SPI_CS_EEPROM;
- break;
- }
- udelay (T_CSS);
-}
-
-static void disable_cs (void)
-{
- switch (ssp_configuration.device) {
- case DEVICE_EEPROM:
- CPLD_SPI &= ~CPLD_SPI_CS_EEPROM;
- break;
- }
- udelay (T_CS);
-}
-
-static void pulse_clock (void)
-{
- CPLD_SPI |= CPLD_SPI_SCLK;
- udelay (T_SKH);
- CPLD_SPI &= ~CPLD_SPI_SCLK;
- udelay (T_SKL);
-}
-
-
-/* execute_spi_command
-
- sends an spi command to a device. It first sends cwrite bits from
- v. If cread is greater than zero it will read cread bits
- (discarding the leading 0 bit) and return them. If cread is less
- than zero it will check for completetion status and return 0 on
- success or -1 on timeout. If cread is zero it does nothing other
- than sending the command.
-
- On the LPD7A400, we can only read or write multiples of 8 bits on
- the codec and the touch screen device. Here, we round up.
-
-*/
-
-static int execute_spi_command (int v, int cwrite, int cread)
-{
- unsigned long l = 0;
-
-#if defined (CONFIG_MACH_LPD7A400)
- /* The codec and touch devices cannot be bit-banged. Instead,
- * the CPLD provides an eight-bit shift register and a crude
- * interface. */
- if ( ssp_configuration.device == DEVICE_CODEC
- || ssp_configuration.device == DEVICE_TOUCH) {
- int select = 0;
-
- PRINTK ("spi(%d %d.%d) 0x%04x",
- ssp_configuration.device, cwrite, cread,
- v);
-#if defined (TALK)
- if (ssp_configuration.device == DEVICE_CODEC)
- PRINTK (" 0x%03x -> %2d", v & 0x1ff, (v >> 9) & 0x7f);
-#endif
- PRINTK ("\n");
-
- if (ssp_configuration.device == DEVICE_CODEC)
- select = CPLD_SPIC_CS_CODEC;
- if (ssp_configuration.device == DEVICE_TOUCH)
- select = CPLD_SPIC_CS_TOUCH;
- if (cwrite) {
- for (cwrite = (cwrite + 7)/8; cwrite-- > 0; ) {
- CPLD_SPID = (v >> (8*cwrite)) & 0xff;
- CPLD_SPIC = select | CPLD_SPIC_LOAD;
- while (!(CPLD_SPIC & CPLD_SPIC_LOADED))
- ;
- CPLD_SPIC = select;
- while (!(CPLD_SPIC & CPLD_SPIC_DONE))
- ;
- }
- v = 0;
- }
- if (cread) {
- mdelay (2); /* *** FIXME: required by ads7843? */
- v = 0;
- for (cread = (cread + 7)/8; cread-- > 0;) {
- CPLD_SPID = 0;
- CPLD_SPIC = select | CPLD_SPIC_READ
- | CPLD_SPIC_START;
- while (!(CPLD_SPIC & CPLD_SPIC_LOADED))
- ;
- CPLD_SPIC = select | CPLD_SPIC_READ;
- while (!(CPLD_SPIC & CPLD_SPIC_DONE))
- ;
- v = (v << 8) | CPLD_SPID;
- }
- }
- return v;
- }
-#endif
-
- PRINTK ("spi(%d) 0x%04x -> 0x%x\r\n", ssp_configuration.device,
- v & 0x1ff, (v >> 9) & 0x7f);
-
- enable_cs ();
-
- v <<= CPLD_SPI_TX_SHIFT; /* Correction for position of SPI_TX bit */
- while (cwrite--) {
- CPLD_SPI
- = (CPLD_SPI & ~CPLD_SPI_TX)
- | ((v >> cwrite) & CPLD_SPI_TX);
- udelay (T_DIS);
- pulse_clock ();
- }
-
- if (cread < 0) {
- int delay = 10;
- disable_cs ();
- udelay (1);
- enable_cs ();
-
- l = -1;
- do {
- if (CPLD_SPI & CPLD_SPI_RX) {
- l = 0;
- break;
- }
- } while (udelay (1), --delay);
- }
- else
- /* We pulse the clock before the data to skip the leading zero. */
- while (cread-- > 0) {
- pulse_clock ();
- l = (l<<1)
- | (((CPLD_SPI & CPLD_SPI_RX)
- >> CPLD_SPI_RX_SHIFT) & 0x1);
- }
-
- disable_cs ();
- return l;
-}
-
-static int ssp_init (void)
-{
- spin_lock_init (&ssp_lock);
- memset (&ssp_configuration, 0, sizeof (ssp_configuration));
- return 0;
-}
-
-
-/* ssp_chip_select
-
- drops the chip select line for the CPLD shift-register controlled
- devices. It doesn't enable chip
-
-*/
-
-static void ssp_chip_select (int enable)
-{
-#if defined (CONFIG_MACH_LPD7A400)
- int select;
-
- if (ssp_configuration.device == DEVICE_CODEC)
- select = CPLD_SPIC_CS_CODEC;
- else if (ssp_configuration.device == DEVICE_TOUCH)
- select = CPLD_SPIC_CS_TOUCH;
- else
- return;
-
- if (enable)
- CPLD_SPIC = select;
- else
- CPLD_SPIC = 0;
-#endif
-}
-
-static void ssp_acquire (void)
-{
- spin_lock (&ssp_lock);
-}
-
-static void ssp_release (void)
-{
- ssp_chip_select (0); /* just in case */
- spin_unlock (&ssp_lock);
-}
-
-static int ssp_configure (int device, int mode, int speed,
- int frame_size_write, int frame_size_read)
-{
- ssp_configuration.device = device;
- ssp_configuration.mode = mode;
- ssp_configuration.speed = speed;
- ssp_configuration.frame_size_write = frame_size_write;
- ssp_configuration.frame_size_read = frame_size_read;
-
- return 0;
-}
-
-static int ssp_read (void)
-{
- return execute_spi_command (0, 0, ssp_configuration.frame_size_read);
-}
-
-static int ssp_write (u16 data)
-{
- execute_spi_command (data, ssp_configuration.frame_size_write, 0);
- return 0;
-}
-
-static int ssp_write_read (u16 data)
-{
- return execute_spi_command (data, ssp_configuration.frame_size_write,
- ssp_configuration.frame_size_read);
-}
-
-struct ssp_driver lh7a40x_cpld_ssp_driver = {
- .init = ssp_init,
- .acquire = ssp_acquire,
- .release = ssp_release,
- .configure = ssp_configure,
- .chip_select = ssp_chip_select,
- .read = ssp_read,
- .write = ssp_write,
- .write_read = ssp_write_read,
-};
-
-
-MODULE_AUTHOR("Marc Singer");
-MODULE_DESCRIPTION("LPD7A40X CPLD SPI driver");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-lh7a40x/time.c b/arch/arm/mach-lh7a40x/time.c
deleted file mode 100644
index 4601e425..0000000
--- a/arch/arm/mach-lh7a40x/time.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * arch/arm/mach-lh7a40x/time.c
- *
- * Copyright (C) 2004 Logic Product Development
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/time.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/leds.h>
-
-#include <asm/mach/time.h>
-#include "common.h"
-
-#if HZ < 100
-# define TIMER_CONTROL TIMER_CONTROL2
-# define TIMER_LOAD TIMER_LOAD2
-# define TIMER_CONSTANT (508469/HZ)
-# define TIMER_MODE (TIMER_C_ENABLE | TIMER_C_PERIODIC | TIMER_C_508KHZ)
-# define TIMER_EOI TIMER_EOI2
-# define TIMER_IRQ IRQ_T2UI
-#else
-# define TIMER_CONTROL TIMER_CONTROL3
-# define TIMER_LOAD TIMER_LOAD3
-# define TIMER_CONSTANT (3686400/HZ)
-# define TIMER_MODE (TIMER_C_ENABLE | TIMER_C_PERIODIC)
-# define TIMER_EOI TIMER_EOI3
-# define TIMER_IRQ IRQ_T3UI
-#endif
-
-static irqreturn_t
-lh7a40x_timer_interrupt(int irq, void *dev_id)
-{
- TIMER_EOI = 0;
- timer_tick();
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction lh7a40x_timer_irq = {
- .name = "LHA740x Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = lh7a40x_timer_interrupt,
-};
-
-static void __init lh7a40x_timer_init (void)
-{
- /* Stop/disable all timers */
- TIMER_CONTROL1 = 0;
- TIMER_CONTROL2 = 0;
- TIMER_CONTROL3 = 0;
-
- setup_irq (TIMER_IRQ, &lh7a40x_timer_irq);
-
- TIMER_LOAD = TIMER_CONSTANT;
- TIMER_CONTROL = TIMER_MODE;
-}
-
-struct sys_timer lh7a40x_timer = {
- .init = &lh7a40x_timer_init,
-};
--
cgit v1.1