From 6f9ec442a07701e0ef241854862fdf2540be1bdb Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 17 Mar 2011 12:55:57 -0300 Subject: ARM: mx5/babbage: Use gpio_request_one in babbage_usbhub_reset MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Current code inside babbage_usbhub_reset uses gpio_direction_output with initial value of the GPIO and also sets the GPIO value via gpio_set_value to the same level right after. This is not needed. By using gpio_request_one it is possible to set the direction and initial value in one shot. Signed-off-by: Fabio Estevam LAKML-Reference: 1300377359-23212-2-git-send-email-fabio.estevam@freescale.com Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-mx51_babbage.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index bea4e41..ab50aa9 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -208,18 +208,16 @@ static inline void babbage_usbhub_reset(void) { int ret; - /* Bring USB hub out of reset */ - ret = gpio_request(BABBAGE_USB_HUB_RESET, "GPIO1_7"); + /* Reset USB hub */ + ret = gpio_request_one(BABBAGE_USB_HUB_RESET, + GPIOF_OUT_INIT_LOW, "GPIO1_7"); if (ret) { printk(KERN_ERR"failed to get GPIO_USB_HUB_RESET: %d\n", ret); return; } - gpio_direction_output(BABBAGE_USB_HUB_RESET, 0); - /* USB HUB RESET - De-assert USB HUB RESET_N */ - msleep(1); - gpio_set_value(BABBAGE_USB_HUB_RESET, 0); - msleep(1); + msleep(2); + /* Deassert reset */ gpio_set_value(BABBAGE_USB_HUB_RESET, 1); } -- cgit v1.1