From 22b1908610dd7ff68471cd4fbd383dbdfe5e0ecd Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 29 Jun 2006 15:09:57 +0100 Subject: [ARM] nommu: provide a way for correct control register value selection Most MMU-based CPUs have a restriction on the setting of the data cache enable and mmu enable bits in the control register, whereby if the data cache is enabled, the MMU must also be enabled. Enabling the data cache without the MMU is an invalid combination. However, there are CPUs where the data cache can be enabled without the MMU. In order to allow these CPUs to take advantage of that, provide a method whereby each proc-*.S file defines the control regsiter value for use with nommu (with the MMU disabled.) Later on, when we add support for enabling the MMU on these devices, we can adjust the "crval" macro to also enable the data cache for nommu. Signed-off-by: Russell King --- arch/arm/mm/proc-arm1020.S | 16 +++++++--------- arch/arm/mm/proc-arm1020e.S | 15 ++++++--------- arch/arm/mm/proc-arm1022.S | 15 ++++++--------- arch/arm/mm/proc-arm1026.S | 15 ++++++--------- arch/arm/mm/proc-arm720.S | 15 ++++++--------- arch/arm/mm/proc-arm920.S | 15 ++++++--------- arch/arm/mm/proc-arm922.S | 15 ++++++--------- arch/arm/mm/proc-arm925.S | 14 +++++--------- arch/arm/mm/proc-arm926.S | 15 ++++++--------- arch/arm/mm/proc-macros.S | 10 ++++++++++ arch/arm/mm/proc-sa110.S | 16 +++++++--------- arch/arm/mm/proc-sa1100.S | 15 ++++++--------- arch/arm/mm/proc-v6.S | 15 ++++++--------- arch/arm/mm/proc-xsc3.S | 19 +++++++++++-------- arch/arm/mm/proc-xscale.S | 16 +++++++--------- 15 files changed, 101 insertions(+), 125 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index b9abbaf..a1b85d9 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -440,11 +440,12 @@ __arm1020_setup: #ifdef CONFIG_MMU mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4 #endif + + adr r5, arm1020_crval + ldmia r5, {r5, r6} mrc p15, 0, r0, c1, c0 @ get control register v4 - ldr r5, arm1020_cr1_clear bic r0, r0, r5 - ldr r5, arm1020_cr1_set - orr r0, r0, r5 + orr r0, r0, r6 #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN orr r0, r0, #0x4000 @ .R.. .... .... .... #endif @@ -456,12 +457,9 @@ __arm1020_setup: * .RVI ZFRS BLDP WCAM * .011 1001 ..11 0101 */ - .type arm1020_cr1_clear, #object - .type arm1020_cr1_set, #object -arm1020_cr1_clear: - .word 0x593f -arm1020_cr1_set: - .word 0x3935 + .type arm1020_crval, #object +arm1020_crval: + crval clear=0x0000593f, mmuset=0x00003935, ucset=0x00001930 __INITDATA diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 8c7e25f..6130930 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -422,11 +422,11 @@ __arm1020e_setup: #ifdef CONFIG_MMU mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4 #endif + adr r5, arm1020e_crval + ldmia r5, {r5, r6} mrc p15, 0, r0, c1, c0 @ get control register v4 - ldr r5, arm1020e_cr1_clear bic r0, r0, r5 - ldr r5, arm1020e_cr1_set - orr r0, r0, r5 + orr r0, r0, r6 #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN orr r0, r0, #0x4000 @ .R.. .... .... .... #endif @@ -438,12 +438,9 @@ __arm1020e_setup: * .RVI ZFRS BLDP WCAM * .011 1001 ..11 0101 */ - .type arm1020e_cr1_clear, #object - .type arm1020e_cr1_set, #object -arm1020e_cr1_clear: - .word 0x5f3f -arm1020e_cr1_set: - .word 0x3935 + .type arm1020e_crval, #object +arm1020e_crval: + crval clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001930 __INITDATA diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index 92218e6..e435974 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -404,11 +404,11 @@ __arm1022_setup: #ifdef CONFIG_MMU mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4 #endif + adr r5, arm1022_crval + ldmia r5, {r5, r6} mrc p15, 0, r0, c1, c0 @ get control register v4 - ldr r5, arm1022_cr1_clear bic r0, r0, r5 - ldr r5, arm1022_cr1_set - orr r0, r0, r5 + orr r0, r0, r6 #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN orr r0, r0, #0x4000 @ .R.............. #endif @@ -421,12 +421,9 @@ __arm1022_setup: * .011 1001 ..11 0101 * */ - .type arm1022_cr1_clear, #object - .type arm1022_cr1_set, #object -arm1022_cr1_clear: - .word 0x7f3f -arm1022_cr1_set: - .word 0x3935 + .type arm1022_crval, #object +arm1022_crval: + crval clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001930 __INITDATA diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 2796c8e..85d8fb0 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -399,11 +399,11 @@ __arm1026_setup: mov r0, #4 @ explicitly disable writeback mcr p15, 7, r0, c15, c0, 0 #endif + adr r5, arm1026_crval + ldmia r5, {r5, r6} mrc p15, 0, r0, c1, c0 @ get control register v4 - ldr r5, arm1026_cr1_clear bic r0, r0, r5 - ldr r5, arm1026_cr1_set - orr r0, r0, r5 + orr r0, r0, r6 #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN orr r0, r0, #0x4000 @ .R.. .... .... .... #endif @@ -416,12 +416,9 @@ __arm1026_setup: * .011 1001 ..11 0101 * */ - .type arm1026_cr1_clear, #object - .type arm1026_cr1_set, #object -arm1026_cr1_clear: - .word 0x7f3f -arm1026_cr1_set: - .word 0x3935 + .type arm1026_crval, #object +arm1026_crval: + crval clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001934 __INITDATA diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index 8610246..b22bc3a 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -169,11 +169,11 @@ __arm720_setup: #ifdef CONFIG_MMU mcr p15, 0, r0, c8, c7, 0 @ flush TLB (v4) #endif + adr r5, arm720_crval + ldmia r5, {r5, r6} mrc p15, 0, r0, c1, c0 @ get control register - ldr r5, arm720_cr1_clear bic r0, r0, r5 - ldr r5, arm720_cr1_set - orr r0, r0, r5 + orr r0, r0, r6 mov pc, lr @ __ret (head.S) .size __arm720_setup, . - __arm720_setup @@ -183,12 +183,9 @@ __arm720_setup: * ..1. 1001 ..11 1101 * */ - .type arm720_cr1_clear, #object - .type arm720_cr1_set, #object -arm720_cr1_clear: - .word 0x2f3f -arm720_cr1_set: - .word 0x213d + .type arm720_crval, #object +arm720_crval: + crval clear=0x00002f3f, mmuset=0x0000213d, ucset=0x00000130 __INITDATA diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 02af3e2..e647c3a 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -391,11 +391,11 @@ __arm920_setup: #ifdef CONFIG_MMU mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4 #endif + adr r5, arm920_crval + ldmia r5, {r5, r6} mrc p15, 0, r0, c1, c0 @ get control register v4 - ldr r5, arm920_cr1_clear bic r0, r0, r5 - ldr r5, arm920_cr1_set - orr r0, r0, r5 + orr r0, r0, r6 mov pc, lr .size __arm920_setup, . - __arm920_setup @@ -405,12 +405,9 @@ __arm920_setup: * ..11 0001 ..11 0101 * */ - .type arm920_cr1_clear, #object - .type arm920_cr1_set, #object -arm920_cr1_clear: - .word 0x3f3f -arm920_cr1_set: - .word 0x3135 + .type arm920_crval, #object +arm920_crval: + crval clear=0x00003f3f, mmuset=0x00003135, ucset=0x00001130 __INITDATA diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 33dae49..0d23769 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -395,11 +395,11 @@ __arm922_setup: #ifdef CONFIG_MMU mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4 #endif + adr r5, arm922_crval + ldmia r5, {r5, r6} mrc p15, 0, r0, c1, c0 @ get control register v4 - ldr r5, arm922_cr1_clear bic r0, r0, r5 - ldr r5, arm922_cr1_set - orr r0, r0, r5 + orr r0, r0, r6 mov pc, lr .size __arm922_setup, . - __arm922_setup @@ -409,12 +409,9 @@ __arm922_setup: * ..11 0001 ..11 0101 * */ - .type arm922_cr1_clear, #object - .type arm922_cr1_set, #object -arm922_cr1_clear: - .word 0x3f3f -arm922_cr1_set: - .word 0x3135 + .type arm922_crval, #object +arm922_crval: + crval clear=0x00003f3f, mmuset=0x00003135, ucset=0x00001130 __INITDATA diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index aaa9f98..07f2a88 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -455,11 +455,10 @@ __arm925_setup: mcr p15, 7, r0, c15, c0, 0 #endif + adr r5, {r5, r6} mrc p15, 0, r0, c1, c0 @ get control register v4 - ldr r5, arm925_cr1_clear bic r0, r0, r5 - ldr r5, arm925_cr1_set - orr r0, r0, r5 + orr r0, r0, r6 #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN orr r0, r0, #0x4000 @ .1.. .... .... .... #endif @@ -472,12 +471,9 @@ __arm925_setup: * .011 0001 ..11 1101 * */ - .type arm925_cr1_clear, #object - .type arm925_cr1_set, #object -arm925_cr1_clear: - .word 0x7f3f -arm925_cr1_set: - .word 0x313d + .type arm925_crval, #object +arm925_crval: + crval clear=0x00007f3f, mmuset=0x0000313d, ucset=0x00001130 __INITDATA diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index ce246dd..77e5837 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -404,11 +404,11 @@ __arm926_setup: mcr p15, 7, r0, c15, c0, 0 #endif + adr r5, arm926_crval + ldmia r5, {r5, r6} mrc p15, 0, r0, c1, c0 @ get control register v4 - ldr r5, arm926_cr1_clear bic r0, r0, r5 - ldr r5, arm926_cr1_set - orr r0, r0, r5 + orr r0, r0, r6 #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN orr r0, r0, #0x4000 @ .1.. .... .... .... #endif @@ -421,12 +421,9 @@ __arm926_setup: * .011 0001 ..11 0101 * */ - .type arm926_cr1_clear, #object - .type arm926_cr1_set, #object -arm926_cr1_clear: - .word 0x7f3f -arm926_cr1_set: - .word 0x3135 + .type arm926_crval, #object +arm926_crval: + crval clear=0x00007f3f, mmuset=0x00003135, ucset=0x00001134 __INITDATA diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index 7cfc260..9e2c89e 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -49,3 +49,13 @@ .macro asid, rd, rn and \rd, \rn, #255 .endm + + .macro crval, clear, mmuset, ucset +#ifdef CONFIG_MMU + .word \clear + .word \mmuset +#else + .word \clear + .word \ucset +#endif + .endm diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index 5a760a2..eeacf60 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -185,11 +185,12 @@ __sa110_setup: #ifdef CONFIG_MMU mcr p15, 0, r10, c8, c7 @ invalidate I,D TLBs on v4 #endif + + adr r5, sa110_crval + ldmia r5, {r5, r6} mrc p15, 0, r0, c1, c0 @ get control register v4 - ldr r5, sa110_cr1_clear bic r0, r0, r5 - ldr r5, sa110_cr1_set - orr r0, r0, r5 + orr r0, r0, r6 mov pc, lr .size __sa110_setup, . - __sa110_setup @@ -199,12 +200,9 @@ __sa110_setup: * ..01 0001 ..11 1101 * */ - .type sa110_cr1_clear, #object - .type sa110_cr1_set, #object -sa110_cr1_clear: - .word 0x3f3f -sa110_cr1_set: - .word 0x113d + .type sa110_crval, #object +sa110_crval: + crval clear=0x00003f3f, mmuset=0x0000113d, ucset=0x00001130 __INITDATA diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 0a2107a..b43696c 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -198,11 +198,11 @@ __sa1100_setup: #ifdef CONFIG_MMU mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4 #endif + adr r5, sa1100_crval + ldmia r5, {r5, r6} mrc p15, 0, r0, c1, c0 @ get control register v4 - ldr r5, sa1100_cr1_clear bic r0, r0, r5 - ldr r5, sa1100_cr1_set - orr r0, r0, r5 + orr r0, r0, r6 mov pc, lr .size __sa1100_setup, . - __sa1100_setup @@ -212,12 +212,9 @@ __sa1100_setup: * ..11 0001 ..11 1101 * */ - .type sa1100_cr1_clear, #object - .type sa1100_cr1_set, #object -sa1100_cr1_clear: - .word 0x3f3f -sa1100_cr1_set: - .word 0x313d + .type sa1100_crval, #object +sa1100_crval: + crval clear=0x00003f3f, mmuset=0x0000313d, ucset=0x00001130 __INITDATA diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index ca13d4d..f0075f1 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -212,11 +212,11 @@ __v6_setup: orr r0, r0, #(0xf << 20) mcr p15, 0, r0, c1, c0, 2 @ Enable full access to VFP #endif + adr r5, v6_crval + ldmia r5, {r5, r6} mrc p15, 0, r0, c1, c0, 0 @ read control register - ldr r5, v6_cr1_clear @ get mask for bits to clear bic r0, r0, r5 @ clear bits them - ldr r5, v6_cr1_set @ get mask for bits to set - orr r0, r0, r5 @ set them + orr r0, r0, r6 @ set them mov pc, lr @ return to head.S:__ret /* @@ -225,12 +225,9 @@ __v6_setup: * rrrr rrrx xxx0 0101 xxxx xxxx x111 xxxx < forced * 0 110 0011 1.00 .111 1101 < we want */ - .type v6_cr1_clear, #object - .type v6_cr1_set, #object -v6_cr1_clear: - .word 0x01e0fb7f -v6_cr1_set: - .word 0x00c0387d + .type v6_crval, #object +v6_crval: + crval clear=0x01e0fb7f, mmuset=0x00c0387d, ucset=0x00c0187c .type v6_processor_functions, #object ENTRY(v6_processor_functions) diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 8d32e21..2303790 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -426,23 +426,26 @@ __xsc3_setup: orr r0, r0, #(1 << 10) @ enable L2 for LLR cache #endif mcr p15, 0, r0, c1, c0, 1 @ set auxiliary control reg + + adr r5, xsc3_crval + ldmia r5, {r5, r6} mrc p15, 0, r0, c1, c0, 0 @ get control register - bic r0, r0, #0x0002 @ .... .... .... ..A. - orr r0, r0, #0x0005 @ .... .... .... .C.M + bic r0, r0, r5 @ .... .... .... ..A. + orr r0, r0, r6 @ .... .... .... .C.M #if BTB_ENABLE - bic r0, r0, #0x0200 @ .... ..R. .... .... - orr r0, r0, #0x3900 @ ..VI Z..S .... .... -#else - bic r0, r0, #0x0a00 @ .... Z.R. .... .... - orr r0, r0, #0x3100 @ ..VI ...S .... .... + orr r0, r0, #0x00000800 @ ..VI Z..S .... .... #endif #if L2_CACHE_ENABLE - orr r0, r0, #0x4000000 @ L2 enable + orr r0, r0, #0x04000000 @ L2 enable #endif mov pc, lr .size __xsc3_setup, . - __xsc3_setup + .type xsc3_crval, #object +xsc3_crval: + crval clear=0x04003b02, mmuset=0x00003105, ucset=0x00001100 + __INITDATA /* diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 29bcc4d..1ad0c88 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -475,11 +475,12 @@ __xscale_setup: orr r0, r0, #1 << 6 @ cp6 for IOP3xx and Bulverde orr r0, r0, #1 << 13 @ Its undefined whether this mcr p15, 0, r0, c15, c1, 0 @ affects USR or SVC modes + + adr r5, xscale_crval + ldmia r5, {r5, r6} mrc p15, 0, r0, c1, c0, 0 @ get control register - ldr r5, xscale_cr1_clear bic r0, r0, r5 - ldr r5, xscale_cr1_set - orr r0, r0, r5 + orr r0, r0, r6 mov pc, lr .size __xscale_setup, . - __xscale_setup @@ -489,12 +490,9 @@ __xscale_setup: * ..11 1.01 .... .101 * */ - .type xscale_cr1_clear, #object - .type xscale_cr1_set, #object -xscale_cr1_clear: - .word 0x3b07 -xscale_cr1_set: - .word 0x3905 + .type xscale_crval, #object +xscale_crval: + crval clear=0x00003b07, mmuset=0x00003905, ucset=0x00001900 __INITDATA -- cgit v1.1