From bc35739354583053e4a3835f2991d0d52798b87f Mon Sep 17 00:00:00 2001 From: Romain Perier Date: Thu, 8 Dec 2016 15:58:47 +0100 Subject: arm64: dts: marvell: Enable spi0 on the board Armada-3720-db This commit enables the device node spi0 on the official development board for the Marvell Armada 3700. It also adds sub-node for the 128Mb SPI-NOR present on the board. Signed-off-by: Romain Perier Tested-by: Gregory CLEMENT Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-3720-db.dts | 30 ++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts index 89de0a7..0c236d8 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts @@ -67,6 +67,36 @@ status = "okay"; }; +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <108000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "bootloader"; + reg = <0x0 0x200000>; + }; + partition@200000 { + label = "U-boot Env"; + reg = <0x200000 0x10000>; + }; + partition@210000 { + label = "Linux"; + reg = <0x210000 0xDF0000>; + }; + }; + }; +}; + /* Exported on the micro USB connector CON32 through an FTDI */ &uart0 { status = "okay"; -- cgit v1.1