From 76c1b8386b31aeda911afaf11f032006d403addf Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Wed, 19 Jun 2013 02:22:18 +0900 Subject: ARM: SAMSUNG: Consolidate uncompress subroutine For mach-exynos, uart_base is a pointer and the value is calculated in the machine folder. For other machines, uart_base is defined as a macro in platform directory. For symmetry, the uart_base macro definition is removed and the uart_base calculation is moved to specific machine folders. This would help us consolidating uncompress subroutine for s5p64x0. Signed-off-by: Tushar Behera Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/include/plat/uncompress.h | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch/arm/plat-samsung') diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h index 02b66d7..2ace0d5 100644 --- a/arch/arm/plat-samsung/include/plat/uncompress.h +++ b/arch/arm/plat-samsung/include/plat/uncompress.h @@ -21,6 +21,8 @@ typedef unsigned int upf_t; /* cannot include linux/serial_core.h */ unsigned int fifo_mask; unsigned int fifo_max; +volatile u8 *uart_base; + /* forward declerations */ static void arch_detect_cpu(void); @@ -37,10 +39,6 @@ static void arch_detect_cpu(void); /* how many bytes we allow into the FIFO at a time in FIFO mode */ #define FIFO_MAX (14) -#ifdef S3C_PA_UART -#define uart_base S3C_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT) -#endif - static __inline__ void uart_wr(unsigned int reg, unsigned int val) { -- cgit v1.1 From fa26c71aaf14c7aa46f02fb85b1ee58b4081d4d3 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Mon, 17 Jun 2013 23:45:29 +0900 Subject: ARM: SAMSUNG: Use local definitions of watchdog registers This patch adds local definitions of required watchdog registers and bitfields to the uncompress header, allowing to remove the dependency on plat/regs-watchdog.h header and the ugly hack to replace virtual with physical addresses. In addition, it fixes reboot on decompression failure feature, due to the mentioned ugly hack not working anymore (the macro being redefined got renamed, without fixing this code). Signed-off-by: Tomasz Figa Tested-by: Sylwester Nawrocki Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/include/plat/uncompress.h | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) (limited to 'arch/arm/plat-samsung') diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h index 2ace0d5..4afc32f 100644 --- a/arch/arm/plat-samsung/include/plat/uncompress.h +++ b/arch/arm/plat-samsung/include/plat/uncompress.h @@ -30,11 +30,20 @@ static void arch_detect_cpu(void); /* defines for UART registers */ #include -#include /* working in physical space... */ -#undef S3C2410_WDOGREG -#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x))) +#define S3C_WDOGREG(x) ((S3C_PA_WDT + (x))) + +#define S3C2410_WTCON S3C_WDOGREG(0x00) +#define S3C2410_WTDAT S3C_WDOGREG(0x04) +#define S3C2410_WTCNT S3C_WDOGREG(0x08) + +#define S3C2410_WTCON_RSTEN (1 << 0) +#define S3C2410_WTCON_ENABLE (1 << 5) + +#define S3C2410_WTCON_DIV128 (3 << 3) + +#define S3C2410_WTCON_PRESCALE(x) ((x) << 8) /* how many bytes we allow into the FIFO at a time in FIFO mode */ #define FIFO_MAX (14) -- cgit v1.1 From a4658e57a7a1bc8d6b54c29c051426ea838fd6d7 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Mon, 17 Jun 2013 23:45:33 +0900 Subject: ARM: SAMSUNG: Add watchdog reset driver This patch adds a watchdog reset driver that can be used on Samsung SoCs that do not provide dedicated reset method. It replaces the legacy helper function that relies on static IO mapping. Signed-off-by: Tomasz Figa Tested-by: Sylwester Nawrocki Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/Kconfig | 6 ++ arch/arm/plat-samsung/Makefile | 1 + .../arm/plat-samsung/include/plat/watchdog-reset.h | 9 ++ arch/arm/plat-samsung/watchdog-reset.c | 97 ++++++++++++++++++++++ 4 files changed, 113 insertions(+) create mode 100644 arch/arm/plat-samsung/watchdog-reset.c (limited to 'arch/arm/plat-samsung') diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index f8ed2de..ec68155 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -475,6 +475,12 @@ config SAMSUNG_WAKEMASK and above. This code allows a set of interrupt to wakeup-mask mappings. See +config SAMSUNG_WDT_RESET + bool + help + Compile support for system restart by triggering watchdog reset. + Used on SoCs that do not provide dedicated reset control. + config S5P_PM bool help diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index a23c460..03cea14 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -56,6 +56,7 @@ obj-$(CONFIG_PM) += pm-gpio.o obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o +obj-$(CONFIG_SAMSUNG_WDT_RESET) += watchdog-reset.o obj-$(CONFIG_S5P_PM) += s5p-pm.o s5p-irq-pm.o obj-$(CONFIG_S5P_SLEEP) += s5p-sleep.o diff --git a/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h index bc4db9b..31a0572 100644 --- a/arch/arm/plat-samsung/include/plat/watchdog-reset.h +++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h @@ -10,6 +10,9 @@ * published by the Free Software Foundation. */ +#ifndef __PLAT_SAMSUNG_WATCHDOG_RESET_H +#define __PLAT_SAMSUNG_WATCHDOG_RESET_H + #include #include #include @@ -44,3 +47,9 @@ static inline void arch_wdt_reset(void) /* delay to allow the serial port to show the message */ mdelay(50); } + +extern void samsung_wdt_reset(void); +extern void samsung_wdt_reset_of_init(void); +extern void samsung_wdt_reset_init(void __iomem *base); + +#endif /* __PLAT_SAMSUNG_WATCHDOG_RESET_H */ diff --git a/arch/arm/plat-samsung/watchdog-reset.c b/arch/arm/plat-samsung/watchdog-reset.c new file mode 100644 index 0000000..2ecb50be --- /dev/null +++ b/arch/arm/plat-samsung/watchdog-reset.c @@ -0,0 +1,97 @@ +/* arch/arm/plat-samsung/watchdog-reset.c + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks + * + * Coyright (c) 2013 Tomasz Figa + * + * Watchdog reset support for Samsung SoCs. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include + +#define S3C2410_WTCON 0x00 +#define S3C2410_WTDAT 0x04 +#define S3C2410_WTCNT 0x08 + +#define S3C2410_WTCON_ENABLE (1 << 5) +#define S3C2410_WTCON_DIV16 (0 << 3) +#define S3C2410_WTCON_RSTEN (1 << 0) +#define S3C2410_WTCON_PRESCALE(x) ((x) << 8) + +static void __iomem *wdt_base; +static struct clk *wdt_clock; + +void samsung_wdt_reset(void) +{ + if (!wdt_base) { + pr_err("%s: wdt reset not initialized\n", __func__); + /* delay to allow the serial port to show the message */ + mdelay(50); + return; + } + + if (!IS_ERR(wdt_clock)) + clk_prepare_enable(wdt_clock); + + /* disable watchdog, to be safe */ + __raw_writel(0, wdt_base + S3C2410_WTCON); + + /* put initial values into count and data */ + __raw_writel(0x80, wdt_base + S3C2410_WTCNT); + __raw_writel(0x80, wdt_base + S3C2410_WTDAT); + + /* set the watchdog to go and reset... */ + __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV16 | + S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x20), + wdt_base + S3C2410_WTCON); + + /* wait for reset to assert... */ + mdelay(500); + + pr_err("Watchdog reset failed to assert reset\n"); + + /* delay to allow the serial port to show the message */ + mdelay(50); +} + +#ifdef CONFIG_OF +static const struct of_device_id s3c2410_wdt_match[] = { + { .compatible = "samsung,s3c2410-wdt" }, + {}, +}; + +void __init samsung_wdt_reset_of_init(void) +{ + struct device_node *np; + + np = of_find_matching_node(NULL, s3c2410_wdt_match); + if (!np) { + pr_err("%s: failed to find watchdog node\n", __func__); + return; + } + + wdt_base = of_iomap(np, 0); + if (!wdt_base) { + pr_err("%s: failed to map watchdog registers\n", __func__); + return; + } + + wdt_clock = of_clk_get(np, 0); +} +#endif + +void __init samsung_wdt_reset_init(void __iomem *base) +{ + wdt_base = base; + wdt_clock = clk_get(NULL, "watchdog"); +} -- cgit v1.1 From 56bc7a1949d3c088b2eebcf03d42d299e4bc5b64 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Mon, 17 Jun 2013 23:45:40 +0900 Subject: ARM: SAMSUNG: Remove legacy watchdog reset code Since all platforms have been moved to the new watchdog reset driver, the legacy code can be removed safely. Signed-off-by: Tomasz Figa Tested-by: Sylwester Nawrocki Signed-off-by: Kukjin Kim --- .../arm/plat-samsung/include/plat/watchdog-reset.h | 35 ---------------------- 1 file changed, 35 deletions(-) (limited to 'arch/arm/plat-samsung') diff --git a/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h index 31a0572..0386b8f 100644 --- a/arch/arm/plat-samsung/include/plat/watchdog-reset.h +++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h @@ -13,41 +13,6 @@ #ifndef __PLAT_SAMSUNG_WATCHDOG_RESET_H #define __PLAT_SAMSUNG_WATCHDOG_RESET_H -#include -#include -#include - -#include -#include -#include -#include - -static inline void arch_wdt_reset(void) -{ - printk("arch_reset: attempting watchdog reset\n"); - - __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */ - - if (!IS_ERR(s3c2410_wdtclk)) - clk_enable(s3c2410_wdtclk); - - /* put initial values into count and data */ - __raw_writel(0x80, S3C2410_WTCNT); - __raw_writel(0x80, S3C2410_WTDAT); - - /* set the watchdog to go and reset... */ - __raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN | - S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON); - - /* wait for reset to assert... */ - mdelay(500); - - printk(KERN_ERR "Watchdog reset failed to assert reset\n"); - - /* delay to allow the serial port to show the message */ - mdelay(50); -} - extern void samsung_wdt_reset(void); extern void samsung_wdt_reset_of_init(void); extern void samsung_wdt_reset_init(void __iomem *base); -- cgit v1.1 From db3824e6bf0b0f421b0d43f08d905935e826a965 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Mon, 17 Jun 2013 23:45:44 +0900 Subject: ARM: SAMSUNG: Remove unused plat/regs-watchdog.h header Since there are no remaining users of this header, it can be safely dropped. Signed-off-by: Tomasz Figa Tested-by: Sylwester Nawrocki Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/include/plat/regs-watchdog.h | 41 ---------------------- 1 file changed, 41 deletions(-) delete mode 100644 arch/arm/plat-samsung/include/plat/regs-watchdog.h (limited to 'arch/arm/plat-samsung') diff --git a/arch/arm/plat-samsung/include/plat/regs-watchdog.h b/arch/arm/plat-samsung/include/plat/regs-watchdog.h deleted file mode 100644 index 4938492..0000000 --- a/arch/arm/plat-samsung/include/plat/regs-watchdog.h +++ /dev/null @@ -1,41 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-watchdog.h - * - * Copyright (c) 2003 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 Watchdog timer control -*/ - - -#ifndef __ASM_ARCH_REGS_WATCHDOG_H -#define __ASM_ARCH_REGS_WATCHDOG_H - -#define S3C_WDOGREG(x) ((x) + S3C_VA_WATCHDOG) - -#define S3C2410_WTCON S3C_WDOGREG(0x00) -#define S3C2410_WTDAT S3C_WDOGREG(0x04) -#define S3C2410_WTCNT S3C_WDOGREG(0x08) - -/* the watchdog can either generate a reset pulse, or an - * interrupt. - */ - -#define S3C2410_WTCON_RSTEN (0x01) -#define S3C2410_WTCON_INTEN (1<<2) -#define S3C2410_WTCON_ENABLE (1<<5) - -#define S3C2410_WTCON_DIV16 (0<<3) -#define S3C2410_WTCON_DIV32 (1<<3) -#define S3C2410_WTCON_DIV64 (2<<3) -#define S3C2410_WTCON_DIV128 (3<<3) - -#define S3C2410_WTCON_PRESCALE(x) ((x) << 8) -#define S3C2410_WTCON_PRESCALE_MASK (0xff00) - -#endif /* __ASM_ARCH_REGS_WATCHDOG_H */ - - -- cgit v1.1