From 293b2da1b61136813fc2764f43304c66ff8040e9 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 24 Aug 2012 15:16:48 +0200 Subject: ARM: pxa: move platform_data definitions Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the pxa include directories Signed-off-by: Arnd Bergmann Acked-by: Mark Brown Acked-by: Greg Kroah-Hartman Acked-by: Nicolas Pitre Acked-by: Mauro Carvalho Chehab Acked-by: Igor Grinberg Acked-by: Jeff Garzik Acked-by: Marek Vasut Acked-by: Robert Jarzmik Acked-by: Paul Parsons Acked-by: Vinod Koul Acked-By: Stefan Schmidt Cc: Eric Miao Cc: Haojian Zhuang Cc: Daniel Ribeiro Cc: Harald Welte Cc: Philipp Zabel Cc: Tomas Cech Cc: Sergey Lapin Cc: Jonathan Cameron Cc: Dan Williams Cc: Dmitry Torokhov Cc: Chris Ball Cc: David Woodhouse Cc: Samuel Ortiz Cc: Alan Stern Cc: Florian Tobias Schandinat Cc: Liam Girdwood Cc: Jaroslav Kysela Cc: Takashi Iwai Cc: Guennadi Liakhovetski Cc: Artem Bityutskiy Cc: openezx-devel@lists.openezx.org --- arch/arm/plat-pxa/include/plat/pxa27x_keypad.h | 73 ------------------------ arch/arm/plat-pxa/include/plat/pxa3xx_nand.h | 79 -------------------------- 2 files changed, 152 deletions(-) delete mode 100644 arch/arm/plat-pxa/include/plat/pxa27x_keypad.h delete mode 100644 arch/arm/plat-pxa/include/plat/pxa3xx_nand.h (limited to 'arch/arm/plat-pxa') diff --git a/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h b/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h deleted file mode 100644 index 5ce8d5e6..0000000 --- a/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h +++ /dev/null @@ -1,73 +0,0 @@ -#ifndef __ASM_ARCH_PXA27x_KEYPAD_H -#define __ASM_ARCH_PXA27x_KEYPAD_H - -#include -#include - -#define MAX_MATRIX_KEY_ROWS (8) -#define MAX_MATRIX_KEY_COLS (8) -#define MATRIX_ROW_SHIFT (3) -#define MAX_DIRECT_KEY_NUM (8) - -/* pxa3xx keypad platform specific parameters - * - * NOTE: - * 1. direct_key_num indicates the number of keys in the direct keypad - * _plus_ the number of rotary-encoder sensor inputs, this can be - * left as 0 if only rotary encoders are enabled, the driver will - * automatically calculate this - * - * 2. direct_key_map is the key code map for the direct keys, if rotary - * encoder(s) are enabled, direct key 0/1(2/3) will be ignored - * - * 3. rotary can be either interpreted as a relative input event (e.g. - * REL_WHEEL/REL_HWHEEL) or specific keys (e.g. UP/DOWN/LEFT/RIGHT) - * - * 4. matrix key and direct key will use the same debounce_interval by - * default, which should be sufficient in most cases - * - * pxa168 keypad platform specific parameter - * - * NOTE: - * clear_wakeup_event callback is a workaround required to clear the - * keypad interrupt. The keypad wake must be cleared in addition to - * reading the MI/DI bits in the KPC register. - */ -struct pxa27x_keypad_platform_data { - - /* code map for the matrix keys */ - unsigned int matrix_key_rows; - unsigned int matrix_key_cols; - unsigned int *matrix_key_map; - int matrix_key_map_size; - - /* direct keys */ - int direct_key_num; - unsigned int direct_key_map[MAX_DIRECT_KEY_NUM]; - /* the key output may be low active */ - int direct_key_low_active; - /* give board a chance to choose the start direct key */ - unsigned int direct_key_mask; - - /* rotary encoders 0 */ - int enable_rotary0; - int rotary0_rel_code; - int rotary0_up_key; - int rotary0_down_key; - - /* rotary encoders 1 */ - int enable_rotary1; - int rotary1_rel_code; - int rotary1_up_key; - int rotary1_down_key; - - /* key debounce interval */ - unsigned int debounce_interval; - - /* clear wakeup event requirement for pxa168 */ - void (*clear_wakeup_event)(void); -}; - -extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info); - -#endif /* __ASM_ARCH_PXA27x_KEYPAD_H */ diff --git a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h deleted file mode 100644 index c42f39f..0000000 --- a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h +++ /dev/null @@ -1,79 +0,0 @@ -#ifndef __ASM_ARCH_PXA3XX_NAND_H -#define __ASM_ARCH_PXA3XX_NAND_H - -#include -#include - -struct pxa3xx_nand_timing { - unsigned int tCH; /* Enable signal hold time */ - unsigned int tCS; /* Enable signal setup time */ - unsigned int tWH; /* ND_nWE high duration */ - unsigned int tWP; /* ND_nWE pulse time */ - unsigned int tRH; /* ND_nRE high duration */ - unsigned int tRP; /* ND_nRE pulse width */ - unsigned int tR; /* ND_nWE high to ND_nRE low for read */ - unsigned int tWHR; /* ND_nWE high to ND_nRE low for status read */ - unsigned int tAR; /* ND_ALE low to ND_nRE low delay */ -}; - -struct pxa3xx_nand_cmdset { - uint16_t read1; - uint16_t read2; - uint16_t program; - uint16_t read_status; - uint16_t read_id; - uint16_t erase; - uint16_t reset; - uint16_t lock; - uint16_t unlock; - uint16_t lock_status; -}; - -struct pxa3xx_nand_flash { - char *name; - uint32_t chip_id; - unsigned int page_per_block; /* Pages per block (PG_PER_BLK) */ - unsigned int page_size; /* Page size in bytes (PAGE_SZ) */ - unsigned int flash_width; /* Width of Flash memory (DWIDTH_M) */ - unsigned int dfc_width; /* Width of flash controller(DWIDTH_C) */ - unsigned int num_blocks; /* Number of physical blocks in Flash */ - - struct pxa3xx_nand_timing *timing; /* NAND Flash timing */ -}; - -/* - * Current pxa3xx_nand controller has two chip select which - * both be workable. - * - * Notice should be taken that: - * When you want to use this feature, you should not enable the - * keep configuration feature, for two chip select could be - * attached with different nand chip. The different page size - * and timing requirement make the keep configuration impossible. - */ - -/* The max num of chip select current support */ -#define NUM_CHIP_SELECT (2) -struct pxa3xx_nand_platform_data { - - /* the data flash bus is shared between the Static Memory - * Controller and the Data Flash Controller, the arbiter - * controls the ownership of the bus - */ - int enable_arbiter; - - /* allow platform code to keep OBM/bootloader defined NFC config */ - int keep_config; - - /* indicate how many chip selects will be used */ - int num_cs; - - const struct mtd_partition *parts[NUM_CHIP_SELECT]; - unsigned int nr_parts[NUM_CHIP_SELECT]; - - const struct pxa3xx_nand_flash * flash; - size_t num_flash; -}; - -extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info); -#endif /* __ASM_ARCH_PXA3XX_NAND_H */ -- cgit v1.1