From 496c8a0bbb726c2608b3b1318d231ab04a9a2ec3 Mon Sep 17 00:00:00 2001 From: Mark Jackson Date: Fri, 19 Apr 2013 21:08:28 +0100 Subject: ARM: OMAP2+: Allow NAND transfer mode to be specified in DT OMAP devices support various NAND transfer modes. Currently all device-tree definitions will use the default "prefetch polled" mode, so this patch enables the transfer mode to be specified in the device-tree. Signed-off-by: Mark Jackson Acked-by: Pekon Gupta Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 6c4da12..a195468 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1345,6 +1345,13 @@ static const char * const nand_ecc_opts[] = { [OMAP_ECC_BCH8_CODE_HW] = "bch8", }; +static const char * const nand_xfer_types[] = { + [NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled", + [NAND_OMAP_POLLED] = "polled", + [NAND_OMAP_PREFETCH_DMA] = "prefetch-dma", + [NAND_OMAP_PREFETCH_IRQ] = "prefetch-irq", +}; + static int gpmc_probe_nand_child(struct platform_device *pdev, struct device_node *child) { @@ -1374,6 +1381,13 @@ static int gpmc_probe_nand_child(struct platform_device *pdev, break; } + if (!of_property_read_string(child, "ti,nand-xfer-type", &s)) + for (val = 0; val < ARRAY_SIZE(nand_xfer_types); val++) + if (!strcasecmp(s, nand_xfer_types[val])) { + gpmc_nand_data->xfer_type = val; + break; + } + val = of_get_nand_bus_width(child); if (val == 16) gpmc_nand_data->devsize = NAND_BUSWIDTH_16; -- cgit v1.1