From b42b918194c4791510ac049e3d507169a7de8544 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 30 May 2013 12:53:05 -0700 Subject: ARM: OMAP2+: Remove board-omap4panda.c We can now boot with device tree. If you don't want to update u-boot, you can boot with appended DTB with the following instructions: 1. Make sure you have the appended DTB support in .config CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND=y 2. Build the zImage $ ARCH=arm CROSS_COMPILE=... make zImage 3. Build the device tree blobs $ ARCH=arm CROSS_COMPILE=... make dtbs 4. Append the correct panda dtb to zImage Depending on your hardware it's omap4-panda.dtb, omap4-panda-a4.dtb or omap4-panda-es.dtb. $ cat arch/arm/boot/zImage arch/arm/boot/dts/omap4-panda-es.dtb > /tmp/appended 5. Use mkimage to produce the appended device tree uImage $ mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e 0x80008000 \ -n "Linux" -d /tmp/appended /tmp/uImage Signed-off-by: Tony Lindgren