From 937eb4bb00588571f223eade260f9b509bf223ab Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Date: Tue, 20 Dec 2011 03:24:21 +0100 Subject: ARM: OMAP1: ams-delta: convert latches to basic_mmio_gpio Once ready, ams-delta specific device drivers currently calling custom ams_delta_latch[12]_write() functions can be updated to call generic gpio_set_value() instead, which will make them less platform dependent. Even more, some custom ams-delta only drivers can perhaps be dropped from the tree after converting selected ams-delta platform devices to follow generic GPIO based device models. The latch_gpios[] table is initially filled with all latch1 and latch2 GPIO pins in order to register and initialize them from the board file until those are handled by respective existing device drivers (leds, nand, lcd, serio, asoc, serial). That table will get almost empty after the transision process is completed, holding only pins not used by any drivers / connected to unused devices, in order to initialize them from the board file for power saving purposes. The new ams_delta_latch_write() function is a unified replacement for those removed ams_delta_latch[12]_write(), and serves as a temporary wrapper over gpio_set_value(), providing the old API for those not yet updated device drivers, and will be removed after all custom drivers are converted or replaced. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap1/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/mach-omap1/Kconfig') diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 4f8d66f..e14532f 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -155,6 +155,7 @@ config MACH_AMS_DELTA bool "Amstrad E3 (Delta)" depends on ARCH_OMAP1 && ARCH_OMAP15XX select FIQ + select GPIO_GENERIC_PLATFORM help Support for the Amstrad E3 (codename Delta) videophone. Say Y here if you have such a device. -- cgit v1.1 From 5ca6180fa6d7333fb5fabf30420b0e3cc32dd731 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Date: Tue, 20 Dec 2011 00:08:53 +0100 Subject: ARM: OMAP1: ams-delta: supersede custom led device by leds-gpio Now that the Amstrad Delta on-board latches have been converted to GPIO devices, use the generic driver to control on-board LEDs which hang off those latches. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap1/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/mach-omap1/Kconfig') diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index e14532f..5b1edba 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -156,6 +156,7 @@ config MACH_AMS_DELTA depends on ARCH_OMAP1 && ARCH_OMAP15XX select FIQ select GPIO_GENERIC_PLATFORM + select LEDS_GPIO_REGISTER help Support for the Amstrad E3 (codename Delta) videophone. Say Y here if you have such a device. -- cgit v1.1 From ac2885df30e2597d627ad619c01b6fc55ac540a7 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Date: Mon, 5 Mar 2012 17:05:10 +0100 Subject: ARM: OMAP1: ams-delta: set up regulator over modem reset GPIO pin The Amstrad Delta on-board latch2 bit named MODEM_NRESET, now available as a GPIO pin AMS_DELTA_GPIO_PIN_NMODEM_RESET, is used to power up/down (bring into/out of a reset state) two distinct on-board devices simultaneously: the modem, and the voice codec. As a consequence, that bit is, or can be, manipulated concurrently by two drivers, or their platform provided hooks. Instead of updating those drivers to use the gpiolib API as a new method of controlling the MODEM_NRESET pin state, like it was done to other drivers accessing latch2 pins, and still being vulnerable to potential concurrency conflicts, or trying to solve that sharing issue with a custom piece of code, set up a fixed regulator device on top of that GPIO pin, with the intention of updating both drivers to manipulate that regulator, not the GPIO pin directly. Before the ASoC driver is updated and the modem platform data expanded with a power management callback for switching its power, the ams_delta_latch_write() function, which still provides the old API for accessing latch2 functionality from not updated drivers, is modified to toggle the regulator instead of the MODEM_NRESET GPIO pin. A helper function provided for balancing the regulator enable/disable operations, together with the consumer data needed for tracking the regulator state, will be removed once the drivers are updated. Depends on patch series "ARM: OMAP1: ams-delta: replace custom I/O with GPIO". Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap1/Kconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm/mach-omap1/Kconfig') diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 5b1edba..4b6a774 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -157,6 +157,8 @@ config MACH_AMS_DELTA select FIQ select GPIO_GENERIC_PLATFORM select LEDS_GPIO_REGISTER + select REGULATOR + select REGULATOR_FIXED_VOLTAGE help Support for the Amstrad E3 (codename Delta) videophone. Say Y here if you have such a device. -- cgit v1.1