From 52b52b4681df8bad450692cf3fa8a61ca1e1599a Mon Sep 17 00:00:00 2001 From: Rohit Vaswani Date: Fri, 21 Jun 2013 12:17:37 -0700 Subject: ARM: msm: Remove pen_release usage pen_release is no longer required as the synchronization is now managed by generic arm code. This is done as suggested in https://lkml.org/lkml/2013/6/4/184 Cc: Russell King Signed-off-by: Rohit Vaswani Signed-off-by: Stephen Boyd Signed-off-by: Kumar Gala --- arch/arm/mach-msm/Makefile | 2 +- arch/arm/mach-msm/headsmp.S | 39 --------------------------------------- arch/arm/mach-msm/hotplug.c | 31 ++++--------------------------- arch/arm/mach-msm/platsmp.c | 37 +++---------------------------------- 4 files changed, 8 insertions(+), 101 deletions(-) delete mode 100644 arch/arm/mach-msm/headsmp.S (limited to 'arch/arm/mach-msm') diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 8e307a1..721f27f 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -19,7 +19,7 @@ obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1) obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_SMP) += headsmp.o platsmp.o +obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o diff --git a/arch/arm/mach-msm/headsmp.S b/arch/arm/mach-msm/headsmp.S deleted file mode 100644 index 6c62c3f..0000000 --- a/arch/arm/mach-msm/headsmp.S +++ /dev/null @@ -1,39 +0,0 @@ -/* - * linux/arch/arm/mach-realview/headsmp.S - * - * Copyright (c) 2003 ARM Limited - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include - -/* - * MSM specific entry point for secondary CPUs. This provides - * a "holding pen" into which all secondary cores are held until we're - * ready for them to initialise. - */ -ENTRY(msm_secondary_startup) - mrc p15, 0, r0, c0, c0, 5 - and r0, r0, #15 - adr r4, 1f - ldmia r4, {r5, r6} - sub r4, r4, r5 - add r6, r6, r4 -pen: ldr r7, [r6] - cmp r7, r0 - bne pen - - /* - * we've been released from the holding pen: secondary_stack - * should now contain the SVC stack for this core - */ - b secondary_startup -ENDPROC(msm_secondary_startup) - - .align -1: .long . - .long pen_release diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c index 326a872..cea80fc 100644 --- a/arch/arm/mach-msm/hotplug.c +++ b/arch/arm/mach-msm/hotplug.c @@ -24,33 +24,10 @@ static inline void cpu_leave_lowpower(void) static inline void platform_do_lowpower(unsigned int cpu) { - /* Just enter wfi for now. TODO: Properly shut off the cpu. */ - for (;;) { - /* - * here's the WFI - */ - asm("wfi" - : - : - : "memory", "cc"); - - if (pen_release == cpu_logical_map(cpu)) { - /* - * OK, proper wakeup, we're done - */ - break; - } - - /* - * getting here, means that we have come out of WFI without - * having been woken up - this shouldn't happen - * - * The trouble is, letting people know about this is not really - * possible, since we are currently running incoherently, and - * therefore cannot safely call printk() or anything else - */ - pr_debug("CPU%u: spurious wakeup call\n", cpu); - } + asm("wfi" + : + : + : "memory", "cc"); } /* diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index f10a1f5..3721b31 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -12,13 +12,10 @@ #include #include #include -#include #include #include -#include #include -#include #include #include "scm-boot.h" @@ -28,7 +25,7 @@ #define SCSS_CPU1CORE_RESET 0xD80 #define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64 -extern void msm_secondary_startup(void); +extern void secondary_startup(void); static DEFINE_SPINLOCK(boot_lock); @@ -41,13 +38,6 @@ static inline int get_core_count(void) static void msm_secondary_init(unsigned int cpu) { /* - * let the primary processor know we're out of the - * pen, then head off into the C entry point - */ - pen_release = -1; - smp_wmb(); - - /* * Synchronise with the boot thread. */ spin_lock(&boot_lock); @@ -57,7 +47,7 @@ static void msm_secondary_init(unsigned int cpu) static void prepare_cold_cpu(unsigned int cpu) { int ret; - ret = scm_set_boot_addr(virt_to_phys(msm_secondary_startup), + ret = scm_set_boot_addr(virt_to_phys(secondary_startup), SCM_FLAG_COLDBOOT_CPU1); if (ret == 0) { void __iomem *sc1_base_ptr; @@ -75,7 +65,6 @@ static void prepare_cold_cpu(unsigned int cpu) static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle) { - unsigned long timeout; static int cold_boot_done; /* Only need to bring cpu out of reset this way once */ @@ -91,39 +80,19 @@ static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle) spin_lock(&boot_lock); /* - * The secondary processor is waiting to be released from - * the holding pen - release it, then wait for it to flag - * that it has been released by resetting pen_release. - * - * Note that "pen_release" is the hardware CPU ID, whereas - * "cpu" is Linux's internal ID. - */ - pen_release = cpu_logical_map(cpu); - sync_cache_w(&pen_release); - - /* * Send the secondary CPU a soft interrupt, thereby causing * the boot monitor to read the system wide flags register, * and branch to the address found there. */ arch_send_wakeup_ipi_mask(cpumask_of(cpu)); - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) { - smp_rmb(); - if (pen_release == -1) - break; - - udelay(10); - } - /* * now the secondary core is starting up let it run its * calibrations, then wait for it to finish */ spin_unlock(&boot_lock); - return pen_release != -1 ? -ENOSYS : 0; + return 0; } /* -- cgit v1.1 From 6a032dba7d2329084dca41cc8d82c0cda13103ef Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 31 Jan 2014 13:48:29 -0600 Subject: ARM: msm: kill off hotplug.c Right now hotplug.c only really implements msm_cpu_die as a wfi. Just move that implementation into platsmp.c. At the same time we use the existing wfi() instead of inline asm. Signed-off-by: Kumar Gala --- arch/arm/mach-msm/Makefile | 1 - arch/arm/mach-msm/common.h | 1 - arch/arm/mach-msm/hotplug.c | 51 --------------------------------------------- arch/arm/mach-msm/platsmp.c | 7 +++++++ 4 files changed, 7 insertions(+), 53 deletions(-) delete mode 100644 arch/arm/mach-msm/hotplug.c (limited to 'arch/arm/mach-msm') diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 721f27f..8327f60 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -18,7 +18,6 @@ obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1) -obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h index 33c7725..0a4899b 100644 --- a/arch/arm/mach-msm/common.h +++ b/arch/arm/mach-msm/common.h @@ -24,7 +24,6 @@ extern void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size, unsigned int mtype, void *caller); extern struct smp_operations msm_smp_ops; -extern void msm_cpu_die(unsigned int cpu); struct msm_mmc_platform_data; diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c deleted file mode 100644 index cea80fc..0000000 --- a/arch/arm/mach-msm/hotplug.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include - -#include - -#include "common.h" - -static inline void cpu_enter_lowpower(void) -{ -} - -static inline void cpu_leave_lowpower(void) -{ -} - -static inline void platform_do_lowpower(unsigned int cpu) -{ - asm("wfi" - : - : - : "memory", "cc"); -} - -/* - * platform-specific code to shutdown a CPU - * - * Called with IRQs disabled - */ -void __ref msm_cpu_die(unsigned int cpu) -{ - /* - * we're ready for shutdown now, so do it - */ - cpu_enter_lowpower(); - platform_do_lowpower(cpu); - - /* - * bring this CPU back into the world of cache - * coherency, and then restore interrupts - */ - cpu_leave_lowpower(); -} diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index 3721b31..251a91e 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -29,6 +29,13 @@ extern void secondary_startup(void); static DEFINE_SPINLOCK(boot_lock); +#ifdef CONFIG_HOTPLUG_CPU +static void __ref msm_cpu_die(unsigned int cpu) +{ + wfi(); +} +#endif + static inline int get_core_count(void) { /* 1 + the PART[1:0] field of MIDR */ -- cgit v1.1 From 3f8e8cee2f4bd02367583cc2d143887d1f49fd6c Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 29 Jan 2014 16:17:30 -0600 Subject: clocksource: qcom: Move clocksource code out of mach-msm We intend to share the clocksource code for MSM platforms between legacy and multiplatform supported qcom SoCs. Acked-by: Olof Johansson Signed-off-by: Kumar Gala --- arch/arm/mach-msm/Kconfig | 13 +- arch/arm/mach-msm/Makefile | 1 - arch/arm/mach-msm/timer.c | 333 --------------------------------------------- 3 files changed, 5 insertions(+), 342 deletions(-) delete mode 100644 arch/arm/mach-msm/timer.c (limited to 'arch/arm/mach-msm') diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 9625cf3..3c4eca7 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -21,7 +21,7 @@ config ARCH_MSM8X60 select CPU_V7 select HAVE_SMP select MSM_SCM if SMP - select MSM_TIMER + select CLKSRC_QCOM config ARCH_MSM8960 bool "Enable support for MSM8960" @@ -29,7 +29,7 @@ config ARCH_MSM8960 select CPU_V7 select HAVE_SMP select MSM_SCM if SMP - select MSM_TIMER + select CLKSRC_QCOM config ARCH_MSM8974 bool "Enable support for MSM8974" @@ -54,7 +54,7 @@ config ARCH_MSM7X00A select MACH_TROUT if !MACH_HALIBUT select MSM_PROC_COMM select MSM_SMD - select MSM_TIMER + select CLKSRC_QCOM select MSM_SMD_PKG3 config ARCH_MSM7X30 @@ -66,7 +66,7 @@ config ARCH_MSM7X30 select MSM_GPIOMUX select MSM_PROC_COMM select MSM_SMD - select MSM_TIMER + select CLKSRC_QCOM select MSM_VIC config ARCH_QSD8X50 @@ -78,7 +78,7 @@ config ARCH_QSD8X50 select MSM_GPIOMUX select MSM_PROC_COMM select MSM_SMD - select MSM_TIMER + select CLKSRC_QCOM select MSM_VIC endchoice @@ -153,7 +153,4 @@ config MSM_GPIOMUX config MSM_SCM bool -config MSM_TIMER - bool - endif diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 8327f60..04b1bee 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -1,4 +1,3 @@ -obj-$(CONFIG_MSM_TIMER) += timer.o obj-$(CONFIG_MSM_PROC_COMM) += clock.o obj-$(CONFIG_MSM_VIC) += irq-vic.o diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c deleted file mode 100644 index fd16449..0000000 --- a/arch/arm/mach-msm/timer.c +++ /dev/null @@ -1,333 +0,0 @@ -/* - * - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2009-2012, The Linux Foundation. All rights reserved. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "common.h" - -#define TIMER_MATCH_VAL 0x0000 -#define TIMER_COUNT_VAL 0x0004 -#define TIMER_ENABLE 0x0008 -#define TIMER_ENABLE_CLR_ON_MATCH_EN BIT(1) -#define TIMER_ENABLE_EN BIT(0) -#define TIMER_CLEAR 0x000C -#define DGT_CLK_CTL 0x10 -#define DGT_CLK_CTL_DIV_4 0x3 -#define TIMER_STS_GPT0_CLR_PEND BIT(10) - -#define GPT_HZ 32768 - -#define MSM_DGT_SHIFT 5 - -static void __iomem *event_base; -static void __iomem *sts_base; - -static irqreturn_t msm_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = dev_id; - /* Stop the timer tick */ - if (evt->mode == CLOCK_EVT_MODE_ONESHOT) { - u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE); - ctrl &= ~TIMER_ENABLE_EN; - writel_relaxed(ctrl, event_base + TIMER_ENABLE); - } - evt->event_handler(evt); - return IRQ_HANDLED; -} - -static int msm_timer_set_next_event(unsigned long cycles, - struct clock_event_device *evt) -{ - u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE); - - ctrl &= ~TIMER_ENABLE_EN; - writel_relaxed(ctrl, event_base + TIMER_ENABLE); - - writel_relaxed(ctrl, event_base + TIMER_CLEAR); - writel_relaxed(cycles, event_base + TIMER_MATCH_VAL); - - if (sts_base) - while (readl_relaxed(sts_base) & TIMER_STS_GPT0_CLR_PEND) - cpu_relax(); - - writel_relaxed(ctrl | TIMER_ENABLE_EN, event_base + TIMER_ENABLE); - return 0; -} - -static void msm_timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - u32 ctrl; - - ctrl = readl_relaxed(event_base + TIMER_ENABLE); - ctrl &= ~(TIMER_ENABLE_EN | TIMER_ENABLE_CLR_ON_MATCH_EN); - - switch (mode) { - case CLOCK_EVT_MODE_RESUME: - case CLOCK_EVT_MODE_PERIODIC: - break; - case CLOCK_EVT_MODE_ONESHOT: - /* Timer is enabled in set_next_event */ - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - break; - } - writel_relaxed(ctrl, event_base + TIMER_ENABLE); -} - -static struct clock_event_device __percpu *msm_evt; - -static void __iomem *source_base; - -static notrace cycle_t msm_read_timer_count(struct clocksource *cs) -{ - return readl_relaxed(source_base + TIMER_COUNT_VAL); -} - -static notrace cycle_t msm_read_timer_count_shift(struct clocksource *cs) -{ - /* - * Shift timer count down by a constant due to unreliable lower bits - * on some targets. - */ - return msm_read_timer_count(cs) >> MSM_DGT_SHIFT; -} - -static struct clocksource msm_clocksource = { - .name = "dg_timer", - .rating = 300, - .read = msm_read_timer_count, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static int msm_timer_irq; -static int msm_timer_has_ppi; - -static int msm_local_timer_setup(struct clock_event_device *evt) -{ - int cpu = smp_processor_id(); - int err; - - evt->irq = msm_timer_irq; - evt->name = "msm_timer"; - evt->features = CLOCK_EVT_FEAT_ONESHOT; - evt->rating = 200; - evt->set_mode = msm_timer_set_mode; - evt->set_next_event = msm_timer_set_next_event; - evt->cpumask = cpumask_of(cpu); - - clockevents_config_and_register(evt, GPT_HZ, 4, 0xffffffff); - - if (msm_timer_has_ppi) { - enable_percpu_irq(evt->irq, IRQ_TYPE_EDGE_RISING); - } else { - err = request_irq(evt->irq, msm_timer_interrupt, - IRQF_TIMER | IRQF_NOBALANCING | - IRQF_TRIGGER_RISING, "gp_timer", evt); - if (err) - pr_err("request_irq failed\n"); - } - - return 0; -} - -static void msm_local_timer_stop(struct clock_event_device *evt) -{ - evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt); - disable_percpu_irq(evt->irq); -} - -static int msm_timer_cpu_notify(struct notifier_block *self, - unsigned long action, void *hcpu) -{ - /* - * Grab cpu pointer in each case to avoid spurious - * preemptible warnings - */ - switch (action & ~CPU_TASKS_FROZEN) { - case CPU_STARTING: - msm_local_timer_setup(this_cpu_ptr(msm_evt)); - break; - case CPU_DYING: - msm_local_timer_stop(this_cpu_ptr(msm_evt)); - break; - } - - return NOTIFY_OK; -} - -static struct notifier_block msm_timer_cpu_nb = { - .notifier_call = msm_timer_cpu_notify, -}; - -static u64 notrace msm_sched_clock_read(void) -{ - return msm_clocksource.read(&msm_clocksource); -} - -static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq, - bool percpu) -{ - struct clocksource *cs = &msm_clocksource; - int res = 0; - - msm_timer_irq = irq; - msm_timer_has_ppi = percpu; - - msm_evt = alloc_percpu(struct clock_event_device); - if (!msm_evt) { - pr_err("memory allocation failed for clockevents\n"); - goto err; - } - - if (percpu) - res = request_percpu_irq(irq, msm_timer_interrupt, - "gp_timer", msm_evt); - - if (res) { - pr_err("request_percpu_irq failed\n"); - } else { - res = register_cpu_notifier(&msm_timer_cpu_nb); - if (res) { - free_percpu_irq(irq, msm_evt); - goto err; - } - - /* Immediately configure the timer on the boot CPU */ - msm_local_timer_setup(__this_cpu_ptr(msm_evt)); - } - -err: - writel_relaxed(TIMER_ENABLE_EN, source_base + TIMER_ENABLE); - res = clocksource_register_hz(cs, dgt_hz); - if (res) - pr_err("clocksource_register failed\n"); - sched_clock_register(msm_sched_clock_read, sched_bits, dgt_hz); -} - -#ifdef CONFIG_OF -static void __init msm_dt_timer_init(struct device_node *np) -{ - u32 freq; - int irq; - struct resource res; - u32 percpu_offset; - void __iomem *base; - void __iomem *cpu0_base; - - base = of_iomap(np, 0); - if (!base) { - pr_err("Failed to map event base\n"); - return; - } - - /* We use GPT0 for the clockevent */ - irq = irq_of_parse_and_map(np, 1); - if (irq <= 0) { - pr_err("Can't get irq\n"); - return; - } - - /* We use CPU0's DGT for the clocksource */ - if (of_property_read_u32(np, "cpu-offset", &percpu_offset)) - percpu_offset = 0; - - if (of_address_to_resource(np, 0, &res)) { - pr_err("Failed to parse DGT resource\n"); - return; - } - - cpu0_base = ioremap(res.start + percpu_offset, resource_size(&res)); - if (!cpu0_base) { - pr_err("Failed to map source base\n"); - return; - } - - if (of_property_read_u32(np, "clock-frequency", &freq)) { - pr_err("Unknown frequency\n"); - return; - } - - event_base = base + 0x4; - sts_base = base + 0x88; - source_base = cpu0_base + 0x24; - freq /= 4; - writel_relaxed(DGT_CLK_CTL_DIV_4, source_base + DGT_CLK_CTL); - - msm_timer_init(freq, 32, irq, !!percpu_offset); -} -CLOCKSOURCE_OF_DECLARE(kpss_timer, "qcom,kpss-timer", msm_dt_timer_init); -CLOCKSOURCE_OF_DECLARE(scss_timer, "qcom,scss-timer", msm_dt_timer_init); -#endif - -static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source, - u32 sts) -{ - void __iomem *base; - - base = ioremap(addr, SZ_256); - if (!base) { - pr_err("Failed to map timer base\n"); - return -ENOMEM; - } - event_base = base + event; - source_base = base + source; - if (sts) - sts_base = base + sts; - - return 0; -} - -void __init msm7x01_timer_init(void) -{ - struct clocksource *cs = &msm_clocksource; - - if (msm_timer_map(0xc0100000, 0x0, 0x10, 0x0)) - return; - cs->read = msm_read_timer_count_shift; - cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)); - /* 600 KHz */ - msm_timer_init(19200000 >> MSM_DGT_SHIFT, 32 - MSM_DGT_SHIFT, 7, - false); -} - -void __init msm7x30_timer_init(void) -{ - if (msm_timer_map(0xc0100000, 0x4, 0x24, 0x80)) - return; - msm_timer_init(24576000 / 4, 32, 1, false); -} - -void __init qsd8x50_timer_init(void) -{ - if (msm_timer_map(0xAC100000, 0x0, 0x10, 0x34)) - return; - msm_timer_init(19200000 / 4, 32, 7, false); -} -- cgit v1.1 From 8fc1b0f87d9fcc7f05873c70b3003328c3d7defa Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 21 Jan 2014 17:14:10 -0600 Subject: ARM: qcom: Split Qualcomm support into legacy and multiplatform Introduce a new mach-qcom that will support SoCs that intend to be multiplatform compatible while keeping mach-msm to legacy SoC/board support that will not transition over to multiplatform. As part of this, we move support for MSM8X60, MSM8960 and MSM8974 over to mach-qcom. Signed-off-by: Kumar Gala --- arch/arm/mach-msm/Kconfig | 45 +------ arch/arm/mach-msm/Makefile | 6 - arch/arm/mach-msm/board-dt.c | 41 ------ arch/arm/mach-msm/platsmp.c | 137 -------------------- arch/arm/mach-msm/scm-boot.c | 39 ------ arch/arm/mach-msm/scm-boot.h | 22 ---- arch/arm/mach-msm/scm.c | 299 ------------------------------------------- arch/arm/mach-msm/scm.h | 25 ---- 8 files changed, 2 insertions(+), 612 deletions(-) delete mode 100644 arch/arm/mach-msm/board-dt.c delete mode 100644 arch/arm/mach-msm/platsmp.c delete mode 100644 arch/arm/mach-msm/scm-boot.c delete mode 100644 arch/arm/mach-msm/scm-boot.h delete mode 100644 arch/arm/mach-msm/scm.c delete mode 100644 arch/arm/mach-msm/scm.h (limited to 'arch/arm/mach-msm') diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 3c4eca7..a7f959e 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -1,50 +1,9 @@ -config ARCH_MSM - bool - -config ARCH_MSM_DT - bool "Qualcomm MSM DT Support" if ARCH_MULTI_V7 - select ARCH_MSM - select ARCH_REQUIRE_GPIOLIB - select CLKSRC_OF - select GENERIC_CLOCKEVENTS - help - Support for Qualcomm's devicetree based MSM systems. - if ARCH_MSM -menu "Qualcomm MSM SoC Selection" - depends on ARCH_MSM_DT - -config ARCH_MSM8X60 - bool "Enable support for MSM8X60" - select ARM_GIC - select CPU_V7 - select HAVE_SMP - select MSM_SCM if SMP - select CLKSRC_QCOM - -config ARCH_MSM8960 - bool "Enable support for MSM8960" - select ARM_GIC - select CPU_V7 - select HAVE_SMP - select MSM_SCM if SMP - select CLKSRC_QCOM - -config ARCH_MSM8974 - bool "Enable support for MSM8974" - select ARM_GIC - select CPU_V7 - select HAVE_ARM_ARCH_TIMER - select HAVE_SMP - select MSM_SCM if SMP - -endmenu - choice prompt "Qualcomm MSM SoC Type" default ARCH_MSM7X00A - depends on ARCH_MSM_NODT + depends on ARCH_MSM config ARCH_MSM7X00A bool "MSM7x00A / MSM7x01A" @@ -99,7 +58,7 @@ config MSM_VIC bool menu "Qualcomm MSM Board Type" - depends on ARCH_MSM_NODT + depends on ARCH_MSM config MACH_HALIBUT depends on ARCH_MSM diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 04b1bee..27c078a 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -13,17 +13,11 @@ obj-$(CONFIG_ARCH_QSD8X50) += dma.o io.o obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o obj-$(CONFIG_MSM_SMD) += last_radio_log.o -obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o - -CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1) - -obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o -obj-$(CONFIG_ARCH_MSM_DT) += board-dt.o obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o diff --git a/arch/arm/mach-msm/board-dt.c b/arch/arm/mach-msm/board-dt.c deleted file mode 100644 index 1f11d93..0000000 --- a/arch/arm/mach-msm/board-dt.c +++ /dev/null @@ -1,41 +0,0 @@ -/* Copyright (c) 2010-2012,2013 The Linux Foundation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include - -#include -#include - -#include "common.h" - -static const char * const msm_dt_match[] __initconst = { - "qcom,msm8660-fluid", - "qcom,msm8660-surf", - "qcom,msm8960-cdp", - NULL -}; - -static const char * const apq8074_dt_match[] __initconst = { - "qcom,apq8074-dragonboard", - NULL -}; - -DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)") - .smp = smp_ops(msm_smp_ops), - .dt_compat = msm_dt_match, -MACHINE_END - -DT_MACHINE_START(APQ_DT, "Qualcomm MSM (Flattened Device Tree)") - .dt_compat = apq8074_dt_match, -MACHINE_END diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c deleted file mode 100644 index 251a91e..0000000 --- a/arch/arm/mach-msm/platsmp.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include - -#include -#include - -#include "scm-boot.h" -#include "common.h" - -#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0 -#define SCSS_CPU1CORE_RESET 0xD80 -#define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64 - -extern void secondary_startup(void); - -static DEFINE_SPINLOCK(boot_lock); - -#ifdef CONFIG_HOTPLUG_CPU -static void __ref msm_cpu_die(unsigned int cpu) -{ - wfi(); -} -#endif - -static inline int get_core_count(void) -{ - /* 1 + the PART[1:0] field of MIDR */ - return ((read_cpuid_id() >> 4) & 3) + 1; -} - -static void msm_secondary_init(unsigned int cpu) -{ - /* - * Synchronise with the boot thread. - */ - spin_lock(&boot_lock); - spin_unlock(&boot_lock); -} - -static void prepare_cold_cpu(unsigned int cpu) -{ - int ret; - ret = scm_set_boot_addr(virt_to_phys(secondary_startup), - SCM_FLAG_COLDBOOT_CPU1); - if (ret == 0) { - void __iomem *sc1_base_ptr; - sc1_base_ptr = ioremap_nocache(0x00902000, SZ_4K*2); - if (sc1_base_ptr) { - writel(0, sc1_base_ptr + VDD_SC1_ARRAY_CLAMP_GFS_CTL); - writel(0, sc1_base_ptr + SCSS_CPU1CORE_RESET); - writel(3, sc1_base_ptr + SCSS_DBG_STATUS_CORE_PWRDUP); - iounmap(sc1_base_ptr); - } - } else - printk(KERN_DEBUG "Failed to set secondary core boot " - "address\n"); -} - -static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle) -{ - static int cold_boot_done; - - /* Only need to bring cpu out of reset this way once */ - if (cold_boot_done == false) { - prepare_cold_cpu(cpu); - cold_boot_done = true; - } - - /* - * set synchronisation state between this boot processor - * and the secondary one - */ - spin_lock(&boot_lock); - - /* - * Send the secondary CPU a soft interrupt, thereby causing - * the boot monitor to read the system wide flags register, - * and branch to the address found there. - */ - arch_send_wakeup_ipi_mask(cpumask_of(cpu)); - - /* - * now the secondary core is starting up let it run its - * calibrations, then wait for it to finish - */ - spin_unlock(&boot_lock); - - return 0; -} - -/* - * Initialise the CPU possible map early - this describes the CPUs - * which may be present or become present in the system. The msm8x60 - * does not support the ARM SCU, so just set the possible cpu mask to - * NR_CPUS. - */ -static void __init msm_smp_init_cpus(void) -{ - unsigned int i, ncores = get_core_count(); - - if (ncores > nr_cpu_ids) { - pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", - ncores, nr_cpu_ids); - ncores = nr_cpu_ids; - } - - for (i = 0; i < ncores; i++) - set_cpu_possible(i, true); -} - -static void __init msm_smp_prepare_cpus(unsigned int max_cpus) -{ -} - -struct smp_operations msm_smp_ops __initdata = { - .smp_init_cpus = msm_smp_init_cpus, - .smp_prepare_cpus = msm_smp_prepare_cpus, - .smp_secondary_init = msm_secondary_init, - .smp_boot_secondary = msm_boot_secondary, -#ifdef CONFIG_HOTPLUG_CPU - .cpu_die = msm_cpu_die, -#endif -}; diff --git a/arch/arm/mach-msm/scm-boot.c b/arch/arm/mach-msm/scm-boot.c deleted file mode 100644 index 45cee3e..0000000 --- a/arch/arm/mach-msm/scm-boot.c +++ /dev/null @@ -1,39 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#include -#include - -#include "scm.h" -#include "scm-boot.h" - -/* - * Set the cold/warm boot address for one of the CPU cores. - */ -int scm_set_boot_addr(phys_addr_t addr, int flags) -{ - struct { - unsigned int flags; - phys_addr_t addr; - } cmd; - - cmd.addr = addr; - cmd.flags = flags; - return scm_call(SCM_SVC_BOOT, SCM_BOOT_ADDR, - &cmd, sizeof(cmd), NULL, 0); -} -EXPORT_SYMBOL(scm_set_boot_addr); diff --git a/arch/arm/mach-msm/scm-boot.h b/arch/arm/mach-msm/scm-boot.h deleted file mode 100644 index 7be32ff..0000000 --- a/arch/arm/mach-msm/scm-boot.h +++ /dev/null @@ -1,22 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __MACH_SCM_BOOT_H -#define __MACH_SCM_BOOT_H - -#define SCM_BOOT_ADDR 0x1 -#define SCM_FLAG_COLDBOOT_CPU1 0x1 -#define SCM_FLAG_WARMBOOT_CPU1 0x2 -#define SCM_FLAG_WARMBOOT_CPU0 0x4 - -int scm_set_boot_addr(phys_addr_t addr, int flags); - -#endif diff --git a/arch/arm/mach-msm/scm.c b/arch/arm/mach-msm/scm.c deleted file mode 100644 index c536fd6..0000000 --- a/arch/arm/mach-msm/scm.c +++ /dev/null @@ -1,299 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#include -#include -#include -#include -#include -#include - -#include - -#include "scm.h" - -/* Cache line size for msm8x60 */ -#define CACHELINESIZE 32 - -#define SCM_ENOMEM -5 -#define SCM_EOPNOTSUPP -4 -#define SCM_EINVAL_ADDR -3 -#define SCM_EINVAL_ARG -2 -#define SCM_ERROR -1 -#define SCM_INTERRUPTED 1 - -static DEFINE_MUTEX(scm_lock); - -/** - * struct scm_command - one SCM command buffer - * @len: total available memory for command and response - * @buf_offset: start of command buffer - * @resp_hdr_offset: start of response buffer - * @id: command to be executed - * @buf: buffer returned from scm_get_command_buffer() - * - * An SCM command is laid out in memory as follows: - * - * ------------------- <--- struct scm_command - * | command header | - * ------------------- <--- scm_get_command_buffer() - * | command buffer | - * ------------------- <--- struct scm_response and - * | response header | scm_command_to_response() - * ------------------- <--- scm_get_response_buffer() - * | response buffer | - * ------------------- - * - * There can be arbitrary padding between the headers and buffers so - * you should always use the appropriate scm_get_*_buffer() routines - * to access the buffers in a safe manner. - */ -struct scm_command { - u32 len; - u32 buf_offset; - u32 resp_hdr_offset; - u32 id; - u32 buf[0]; -}; - -/** - * struct scm_response - one SCM response buffer - * @len: total available memory for response - * @buf_offset: start of response data relative to start of scm_response - * @is_complete: indicates if the command has finished processing - */ -struct scm_response { - u32 len; - u32 buf_offset; - u32 is_complete; -}; - -/** - * alloc_scm_command() - Allocate an SCM command - * @cmd_size: size of the command buffer - * @resp_size: size of the response buffer - * - * Allocate an SCM command, including enough room for the command - * and response headers as well as the command and response buffers. - * - * Returns a valid &scm_command on success or %NULL if the allocation fails. - */ -static struct scm_command *alloc_scm_command(size_t cmd_size, size_t resp_size) -{ - struct scm_command *cmd; - size_t len = sizeof(*cmd) + sizeof(struct scm_response) + cmd_size + - resp_size; - - cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL); - if (cmd) { - cmd->len = len; - cmd->buf_offset = offsetof(struct scm_command, buf); - cmd->resp_hdr_offset = cmd->buf_offset + cmd_size; - } - return cmd; -} - -/** - * free_scm_command() - Free an SCM command - * @cmd: command to free - * - * Free an SCM command. - */ -static inline void free_scm_command(struct scm_command *cmd) -{ - kfree(cmd); -} - -/** - * scm_command_to_response() - Get a pointer to a scm_response - * @cmd: command - * - * Returns a pointer to a response for a command. - */ -static inline struct scm_response *scm_command_to_response( - const struct scm_command *cmd) -{ - return (void *)cmd + cmd->resp_hdr_offset; -} - -/** - * scm_get_command_buffer() - Get a pointer to a command buffer - * @cmd: command - * - * Returns a pointer to the command buffer of a command. - */ -static inline void *scm_get_command_buffer(const struct scm_command *cmd) -{ - return (void *)cmd->buf; -} - -/** - * scm_get_response_buffer() - Get a pointer to a response buffer - * @rsp: response - * - * Returns a pointer to a response buffer of a response. - */ -static inline void *scm_get_response_buffer(const struct scm_response *rsp) -{ - return (void *)rsp + rsp->buf_offset; -} - -static int scm_remap_error(int err) -{ - switch (err) { - case SCM_ERROR: - return -EIO; - case SCM_EINVAL_ADDR: - case SCM_EINVAL_ARG: - return -EINVAL; - case SCM_EOPNOTSUPP: - return -EOPNOTSUPP; - case SCM_ENOMEM: - return -ENOMEM; - } - return -EINVAL; -} - -static u32 smc(u32 cmd_addr) -{ - int context_id; - register u32 r0 asm("r0") = 1; - register u32 r1 asm("r1") = (u32)&context_id; - register u32 r2 asm("r2") = cmd_addr; - do { - asm volatile( - __asmeq("%0", "r0") - __asmeq("%1", "r0") - __asmeq("%2", "r1") - __asmeq("%3", "r2") -#ifdef REQUIRES_SEC - ".arch_extension sec\n" -#endif - "smc #0 @ switch to secure world\n" - : "=r" (r0) - : "r" (r0), "r" (r1), "r" (r2) - : "r3"); - } while (r0 == SCM_INTERRUPTED); - - return r0; -} - -static int __scm_call(const struct scm_command *cmd) -{ - int ret; - u32 cmd_addr = virt_to_phys(cmd); - - /* - * Flush the entire cache here so callers don't have to remember - * to flush the cache when passing physical addresses to the secure - * side in the buffer. - */ - flush_cache_all(); - ret = smc(cmd_addr); - if (ret < 0) - ret = scm_remap_error(ret); - - return ret; -} - -/** - * scm_call() - Send an SCM command - * @svc_id: service identifier - * @cmd_id: command identifier - * @cmd_buf: command buffer - * @cmd_len: length of the command buffer - * @resp_buf: response buffer - * @resp_len: length of the response buffer - * - * Sends a command to the SCM and waits for the command to finish processing. - */ -int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len, - void *resp_buf, size_t resp_len) -{ - int ret; - struct scm_command *cmd; - struct scm_response *rsp; - - cmd = alloc_scm_command(cmd_len, resp_len); - if (!cmd) - return -ENOMEM; - - cmd->id = (svc_id << 10) | cmd_id; - if (cmd_buf) - memcpy(scm_get_command_buffer(cmd), cmd_buf, cmd_len); - - mutex_lock(&scm_lock); - ret = __scm_call(cmd); - mutex_unlock(&scm_lock); - if (ret) - goto out; - - rsp = scm_command_to_response(cmd); - do { - u32 start = (u32)rsp; - u32 end = (u32)scm_get_response_buffer(rsp) + resp_len; - start &= ~(CACHELINESIZE - 1); - while (start < end) { - asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start) - : "memory"); - start += CACHELINESIZE; - } - } while (!rsp->is_complete); - - if (resp_buf) - memcpy(resp_buf, scm_get_response_buffer(rsp), resp_len); -out: - free_scm_command(cmd); - return ret; -} -EXPORT_SYMBOL(scm_call); - -u32 scm_get_version(void) -{ - int context_id; - static u32 version = -1; - register u32 r0 asm("r0"); - register u32 r1 asm("r1"); - - if (version != -1) - return version; - - mutex_lock(&scm_lock); - - r0 = 0x1 << 8; - r1 = (u32)&context_id; - do { - asm volatile( - __asmeq("%0", "r0") - __asmeq("%1", "r1") - __asmeq("%2", "r0") - __asmeq("%3", "r1") -#ifdef REQUIRES_SEC - ".arch_extension sec\n" -#endif - "smc #0 @ switch to secure world\n" - : "=r" (r0), "=r" (r1) - : "r" (r0), "r" (r1) - : "r2", "r3"); - } while (r0 == SCM_INTERRUPTED); - - version = r1; - mutex_unlock(&scm_lock); - - return version; -} -EXPORT_SYMBOL(scm_get_version); diff --git a/arch/arm/mach-msm/scm.h b/arch/arm/mach-msm/scm.h deleted file mode 100644 index 00b31ea..0000000 --- a/arch/arm/mach-msm/scm.h +++ /dev/null @@ -1,25 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __MACH_SCM_H -#define __MACH_SCM_H - -#define SCM_SVC_BOOT 0x1 -#define SCM_SVC_PIL 0x2 - -extern int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len, - void *resp_buf, size_t resp_len); - -#define SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF)) - -extern u32 scm_get_version(void); - -#endif -- cgit v1.1