From 7b239307db60011afe9e9799fd420b58584defb1 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 30 Dec 2016 09:33:28 -0200 Subject: ARM: mach-mx31_3ds: Remove camera support Since commit c93cc61475ebbe6e66 ("[media] staging/media: remove deprecated mx3 driver") the mx3 camera driver has been removed, so remove the camera support from the board file as well. Signed-off-by: Fabio Estevam Tested-by: Magnus Lilja Signed-off-by: Shawn Guo --- arch/arm/mach-imx/mach-mx31_3ds.c | 160 -------------------------------------- 1 file changed, 160 deletions(-) (limited to 'arch/arm/mach-imx') diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 12b8a52..558e5f8 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -26,16 +26,12 @@ #include #include #include -#include - -#include #include #include #include #include #include -#include #include "3ds_debugboard.h" #include "common.h" @@ -137,23 +133,6 @@ static int mx31_3ds_pins[] = { MX31_PIN_HSYNC__HSYNC, MX31_PIN_FPSHIFT__FPSHIFT, MX31_PIN_CONTRAST__CONTRAST, - /* CSI */ - MX31_PIN_CSI_D6__CSI_D6, - MX31_PIN_CSI_D7__CSI_D7, - MX31_PIN_CSI_D8__CSI_D8, - MX31_PIN_CSI_D9__CSI_D9, - MX31_PIN_CSI_D10__CSI_D10, - MX31_PIN_CSI_D11__CSI_D11, - MX31_PIN_CSI_D12__CSI_D12, - MX31_PIN_CSI_D13__CSI_D13, - MX31_PIN_CSI_D14__CSI_D14, - MX31_PIN_CSI_D15__CSI_D15, - MX31_PIN_CSI_HSYNC__CSI_HSYNC, - MX31_PIN_CSI_MCLK__CSI_MCLK, - MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, - MX31_PIN_CSI_VSYNC__CSI_VSYNC, - MX31_PIN_CSI_D5__GPIO3_5, /* CMOS PWDN */ - IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_GPIO), /* CMOS reset */ /* SSI */ MX31_PIN_STXD4__STXD4, MX31_PIN_SRXD4__SRXD4, @@ -162,98 +141,6 @@ static int mx31_3ds_pins[] = { }; /* - * Camera support - */ -static phys_addr_t mx3_camera_base __initdata; -#define MX31_3DS_CAMERA_BUF_SIZE SZ_8M - -#define MX31_3DS_GPIO_CAMERA_PW IOMUX_TO_GPIO(MX31_PIN_CSI_D5) -#define MX31_3DS_GPIO_CAMERA_RST IOMUX_TO_GPIO(MX31_PIN_RI_DTE1) - -static struct gpio mx31_3ds_camera_gpios[] = { - { MX31_3DS_GPIO_CAMERA_PW, GPIOF_OUT_INIT_HIGH, "camera-power" }, - { MX31_3DS_GPIO_CAMERA_RST, GPIOF_OUT_INIT_HIGH, "camera-reset" }, -}; - -static const struct mx3_camera_pdata mx31_3ds_camera_pdata __initconst = { - .flags = MX3_CAMERA_DATAWIDTH_10, - .mclk_10khz = 2600, -}; - -static int __init mx31_3ds_init_camera(void) -{ - int dma, ret = -ENOMEM; - struct platform_device *pdev = - imx31_alloc_mx3_camera(&mx31_3ds_camera_pdata); - - if (IS_ERR(pdev)) - return PTR_ERR(pdev); - - if (!mx3_camera_base) - goto err; - - dma = dma_declare_coherent_memory(&pdev->dev, - mx3_camera_base, mx3_camera_base, - MX31_3DS_CAMERA_BUF_SIZE, - DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); - - if (!(dma & DMA_MEMORY_MAP)) - goto err; - - ret = platform_device_add(pdev); - if (ret) -err: - platform_device_put(pdev); - - return ret; -} - -static int mx31_3ds_camera_power(struct device *dev, int on) -{ - /* enable or disable the camera */ - pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE"); - gpio_set_value(MX31_3DS_GPIO_CAMERA_PW, on ? 0 : 1); - - if (!on) - goto out; - - /* If enabled, give a reset impulse */ - gpio_set_value(MX31_3DS_GPIO_CAMERA_RST, 0); - msleep(20); - gpio_set_value(MX31_3DS_GPIO_CAMERA_RST, 1); - msleep(100); - -out: - return 0; -} - -static struct i2c_board_info mx31_3ds_i2c_camera = { - I2C_BOARD_INFO("ov2640", 0x30), -}; - -static struct regulator_bulk_data mx31_3ds_camera_regs[] = { - { .supply = "cmos_vcore" }, - { .supply = "cmos_2v8" }, -}; - -static struct soc_camera_link iclink_ov2640 = { - .bus_id = 0, - .board_info = &mx31_3ds_i2c_camera, - .i2c_adapter_id = 0, - .power = mx31_3ds_camera_power, - .regulators = mx31_3ds_camera_regs, - .num_regulators = ARRAY_SIZE(mx31_3ds_camera_regs), -}; - -static struct platform_device mx31_3ds_ov2640 = { - .name = "soc-camera-pdrv", - .id = 0, - .dev = { - .platform_data = &iclink_ov2640, - }, -}; - -/* * FB support */ static const struct fb_videomode fb_modedb[] = { @@ -410,7 +297,6 @@ static struct regulator_init_data vmmc2_init = { static struct regulator_consumer_supply vmmc1_consumers[] = { REGULATOR_SUPPLY("vcore", "spi0.0"), - REGULATOR_SUPPLY("cmos_2v8", "soc-camera-pdrv.0"), }; static struct regulator_init_data vmmc1_init = { @@ -441,22 +327,6 @@ static struct regulator_init_data vgen_init = { .consumer_supplies = vgen_consumers, }; -static struct regulator_consumer_supply vvib_consumers[] = { - REGULATOR_SUPPLY("cmos_vcore", "soc-camera-pdrv.0"), -}; - -static struct regulator_init_data vvib_init = { - .constraints = { - .min_uV = 1300000, - .max_uV = 1300000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(vvib_consumers), - .consumer_supplies = vvib_consumers, -}; - static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = { { .id = MC13783_REG_PWGT1SPI, /* Power Gate for ARM core. */ @@ -480,9 +350,6 @@ static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = { }, { .id = MC13783_REG_VGEN, /* Power LCD */ .init_data = &vgen_init, - }, { - .id = MC13783_REG_VVIB, /* Power CMOS */ - .init_data = &vvib_init, }, }; @@ -688,10 +555,6 @@ static const struct imxi2c_platform_data mx31_3ds_i2c0_data __initconst = { .bitrate = 100000, }; -static struct platform_device *devices[] __initdata = { - &mx31_3ds_ov2640, -}; - static void __init mx31_3ds_init(void) { imx31_soc_init(); @@ -723,14 +586,10 @@ static void __init mx31_3ds_init(void) static void __init mx31_3ds_late(void) { - int ret; - mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); spi_register_board_info(mx31_3ds_spi_devs, ARRAY_SIZE(mx31_3ds_spi_devs)); - platform_add_devices(devices, ARRAY_SIZE(devices)); - mx31_3ds_usbotg_init(); if (otg_mode_host) { otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | @@ -751,17 +610,6 @@ static void __init mx31_3ds_late(void) "devices on the debug board are unusable.\n"); imx31_add_mxc_mmc(0, &sdhc1_pdata); - - /* CSI */ - /* Camera power: default - off */ - ret = gpio_request_array(mx31_3ds_camera_gpios, - ARRAY_SIZE(mx31_3ds_camera_gpios)); - if (ret) { - pr_err("Failed to request camera gpios"); - iclink_ov2640.power = NULL; - } - - mx31_3ds_init_camera(); } static void __init mx31_3ds_timer_init(void) @@ -769,13 +617,6 @@ static void __init mx31_3ds_timer_init(void) mx31_clocks_init(26000000); } -static void __init mx31_3ds_reserve(void) -{ - /* reserve MX31_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */ - mx3_camera_base = arm_memblock_steal(MX31_3DS_CAMERA_BUF_SIZE, - MX31_3DS_CAMERA_BUF_SIZE); -} - MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") /* Maintainer: Freescale Semiconductor, Inc. */ .atag_offset = 0x100, @@ -785,6 +626,5 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") .init_time = mx31_3ds_timer_init, .init_machine = mx31_3ds_init, .init_late = mx31_3ds_late, - .reserve = mx31_3ds_reserve, .restart = mxc_restart, MACHINE_END -- cgit v1.1