From bbb33445b9cdd5ac7609723fcfc28dfa77a11039 Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Wed, 20 Jun 2012 23:10:13 +0530 Subject: ARM: davinci: da8xx: fix interrupt handling CP_INTC code in entry-macro.S code reads SECR1n register to see if an interrupt was indeed pending. This register is actually marked as write-only in the OMAP-L138 TRM. Moreover, the code just checks to see the entire register is non-zero and does not check a specific interrupt number. Fix this to use interrupt pending bit in GIPR register for this purpose. GIPR register is already being read to know the highest priority interrupt pending. Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/include/mach/entry-macro.S | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'arch/arm/mach-davinci') diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S index 768b3c0..cf5f573 100644 --- a/arch/arm/mach-davinci/include/mach/entry-macro.S +++ b/arch/arm/mach-davinci/include/mach/entry-macro.S @@ -30,12 +30,10 @@ #endif #if defined(CONFIG_CP_INTC) 1001: ldr \irqnr, [\base, #0x80] /* get irq number */ + mov \tmp, \irqnr, lsr #31 and \irqnr, \irqnr, #0xff /* irq is in bits 0-9 */ - mov \tmp, \irqnr, lsr #3 - and \tmp, \tmp, #0xfc - add \tmp, \tmp, #0x280 /* get the register offset */ - ldr \irqstat, [\base, \tmp] /* get the intc status */ - cmp \irqstat, #0x0 + and \tmp, \tmp, #0x1 + cmp \tmp, #0x1 #endif 1002: .endm -- cgit v1.1