From a745a622434d9c3ff6505125b37fd6828ecadb87 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Fri, 5 Sep 2008 00:34:50 +0100
Subject: [ARM] 5240/1: AT91: eeproms on sam9260ek, sam9263ek

The at91sam9260 and at91sam9263 EK boards have 64 KiB I2C EEPROMs.
This patch declares them in the board init code so the new at24
driver will use them.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/board-sam9263ek.c | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

(limited to 'arch/arm/mach-at91/board-sam9263ek.c')

diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index b1d1196..c51f2eb 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -26,6 +26,7 @@
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/i2c/at24.h>
 #include <linux/fb.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
@@ -203,6 +204,24 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 
 
 /*
+ * I2C devices
+ */
+static struct at24_platform_data at24c512 = {
+	.byte_len	= SZ_512K / 8,
+	.page_size	= 128,
+	.flags		= AT24_FLAG_ADDR16,
+};
+
+
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("24c512", 0x50),
+		.platform_data = &at24c512,
+	},
+	/* more devices can be added using expansion connectors */
+};
+
+/*
  * LCD Controller
  */
 #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
@@ -360,7 +379,7 @@ static void __init ek_board_init(void)
 	/* NAND */
 	at91_add_device_nand(&ek_nand_data);
 	/* I2C */
-	at91_add_device_i2c(NULL, 0);
+	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	/* LCD Controller */
 	at91_add_device_lcdc(&ek_lcdc_data);
 	/* Push Buttons */
-- 
cgit v1.1


From e505240b6a6fd47b84cfeb1272ffeacd3e0874b3 Mon Sep 17 00:00:00 2001
From: Andrew Victor <linux@maxim.org.za>
Date: Sun, 21 Sep 2008 21:30:02 +0100
Subject: [ARM] 5257/2: [AT91] Use SZ_ definitions and MTDPART_OFS_NXTBLK
 instead of hex-values

In the various AT91 board files, replace hard-coded size values (eg,
0x800000) with the SZ_ size definitions (eg, SZ_8M) from sizes.h
Also replace MTD partition offsets with MTDPART_OFS_NXTBLK.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/board-sam9263ek.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'arch/arm/mach-at91/board-sam9263ek.c')

diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index c51f2eb..ad71f4a 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -33,7 +33,6 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -42,6 +41,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
@@ -173,11 +173,11 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Partition 1",
 		.offset	= 0,
-		.size	= 64 * 1024 * 1024,
+		.size	= SZ_64M,
 	},
 	{
 		.name	= "Partition 2",
-		.offset	= 64 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
@@ -227,7 +227,7 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = {
 #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
 static struct fb_videomode at91_tft_vga_modes[] = {
 	{
-	        .name           = "TX09D50VM1CCA @ 60",
+		.name		= "TX09D50VM1CCA @ 60",
 		.refresh	= 60,
 		.xres		= 240,		.yres		= 320,
 		.pixclock	= KHZ2PICOS(4965),
@@ -243,7 +243,7 @@ static struct fb_videomode at91_tft_vga_modes[] = {
 
 static struct fb_monspecs at91fb_default_monspecs = {
 	.manufacturer	= "HIT",
-	.monitor        = "TX09D70VM1CCA",
+	.monitor	= "TX09D70VM1CCA",
 
 	.modedb		= at91_tft_vga_modes,
 	.modedb_len	= ARRAY_SIZE(at91_tft_vga_modes),
@@ -254,7 +254,7 @@ static struct fb_monspecs at91fb_default_monspecs = {
 };
 
 #define AT91SAM9263_DEFAULT_LCDCON2 	(ATMEL_LCDC_MEMOR_LITTLE \
-					| ATMEL_LCDC_DISTYPE_TFT    \
+					| ATMEL_LCDC_DISTYPE_TFT \
 					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
 
 static void at91_lcdc_power_control(int on)
-- 
cgit v1.1


From a7307bf22557e1e029df0ea6f2a2973de4d9c135 Mon Sep 17 00:00:00 2001
From: Andrew Victor <linux@maxim.org.za>
Date: Sun, 21 Sep 2008 21:31:16 +0100
Subject: [ARM] 5259/2: [AT91] PWM LEDs on AT91SAM9263-EK

Use the PWM controller and leds-atmel-pwm.c driver to drive a LED on
the Atmel AT91SAM9263-EK board.

Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/board-sam9263ek.c | 25 +++++++++++++++++--------
 1 file changed, 17 insertions(+), 8 deletions(-)

(limited to 'arch/arm/mach-at91/board-sam9263ek.c')

diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index ad71f4a..2924b68 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -30,6 +30,7 @@
 #include <linux/fb.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/leds.h>
 
 #include <video/atmel_lcdc.h>
 
@@ -339,25 +340,32 @@ static struct atmel_ac97_data ek_ac97_data = {
  * LEDs ... these could all be PWM-driven, for variable brightness
  */
 static struct gpio_led ek_leds[] = {
-	{	/* "left" led, green, userled1, pwm1 */
-		.name			= "ds1",
-		.gpio			= AT91_PIN_PB8,
-		.active_low		= 1,
-		.default_trigger	= "mmc0",
-	},
-	{	/* "right" led, green, userled2, pwm2 */
+	{	/* "right" led, green, userled2 (could be driven by pwm2) */
 		.name			= "ds2",
 		.gpio			= AT91_PIN_PC29,
 		.active_low		= 1,
 		.default_trigger	= "nand-disk",
 	},
-	{	/* "power" led, yellow, pwm0 */
+	{	/* "power" led, yellow (could be driven by pwm0) */
 		.name			= "ds3",
 		.gpio			= AT91_PIN_PB7,
 		.default_trigger	= "heartbeat",
 	}
 };
 
+/*
+ * PWM Leds
+ */
+static struct gpio_led ek_pwm_led[] = {
+	/* For now only DS1 is PWM-driven (by pwm1) */
+	{
+		.name			= "ds1",
+		.gpio			= 1,	/* is PWM channel number */
+		.active_low		= 1,
+		.default_trigger	= "none",
+	}
+};
+
 
 static void __init ek_board_init(void)
 {
@@ -388,6 +396,7 @@ static void __init ek_board_init(void)
 	at91_add_device_ac97(&ek_ac97_data);
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
 }
 
 MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
-- 
cgit v1.1


From 77789ad8b1d58eb9ba5e14860f439d024c5e4120 Mon Sep 17 00:00:00 2001
From: Andrew Victor <linux@maxim.org.za>
Date: Sun, 21 Sep 2008 21:34:06 +0100
Subject: [ARM] 5263/2: [AT91] GPIO buttons as wakeup sources

Allow the various GPIO-connected buttons to be used as wakeup sources.
Also enable the internal GPIO pullup.

Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/board-sam9263ek.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch/arm/mach-at91/board-sam9263ek.c')

diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 2924b68..8354015 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -297,7 +297,7 @@ static struct gpio_keys_button ek_buttons[] = {
 		.active_low	= 1,
 		.desc		= "right_click",
 		.wakeup		= 1,
-	},
+	}
 };
 
 static struct gpio_keys_platform_data ek_button_data = {
@@ -316,9 +316,9 @@ static struct platform_device ek_button_device = {
 
 static void __init ek_add_device_buttons(void)
 {
-	at91_set_GPIO_periph(AT91_PIN_PC5, 0);	/* left button */
+	at91_set_GPIO_periph(AT91_PIN_PC5, 1);	/* left button */
 	at91_set_deglitch(AT91_PIN_PC5, 1);
-	at91_set_GPIO_periph(AT91_PIN_PC4, 0);	/* right button */
+	at91_set_GPIO_periph(AT91_PIN_PC4, 1);	/* right button */
 	at91_set_deglitch(AT91_PIN_PC4, 1);
 
 	platform_device_register(&ek_button_device);
-- 
cgit v1.1