From bf98c1eac1d4a6bcf00532e4fa41d8126cd6c187 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sat, 9 Nov 2013 13:33:48 +0100 Subject: ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY SH-Mobile platforms are transitioning from non-multiplatform to multiplatform kernel. A new ARCH_SHMOBILE_MULTI configuration symbol has been created to group all multiplatform-enabled SH-Mobile SoCs. The existing ARCH_SHMOBILE configuration symbol groups SoCs that haven't been converted yet. This arrangement works fine for the arch/ code, but lots of drivers needed on both ARCH_SHMOBILE and ARCH_SHMOBILE_MULTI depend on ARCH_SHMOBILE only. In order to avoid changing them, rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY, and create a new boolean ARCH_SHMOBILE configuration symbol that is selected by both ARCH_SHMOBILE_LEGACY and ARCH_SHMOBILE_MULTI. Signed-off-by: Laurent Pinchart Acked-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/boot/dts/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d57c1a6..5839077 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -216,7 +216,7 @@ dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \ s3c6410-smdk6410.dtb -dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ +dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \ r7s72100-genmai.dtb \ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ -- cgit v1.1 From 2440946c29a37ee616a92152972a3772bd2f293c Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Mon, 9 Sep 2013 14:17:52 +0200 Subject: ARM: add Armada 1500 and Sony NSZ-GS7 device tree files This adds very basic device tree files for the Marvell Armada 1500 SoC (Berlin BG2) and the Sony NSZ-GS7 GoogleTV board. Currently, SoC only has nodes for cpus, some clocks, l2 cache controller, local timer, apb timers, uart, and interrupt controllers. The Sony NSZ-GS7 is a GoogleTV consumer device comprising the Armada 1500 SoC above. Signed-off-by: Sebastian Hesselbarth Reviewed-by: Jason Cooper Reviewed-by: Thomas Petazzoni Reviewed-by: Arnd Bergmann Reviewed-by: Jisheng Zhang --- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts | 29 ++++ arch/arm/boot/dts/berlin2.dtsi | 227 +++++++++++++++++++++++++++++ 3 files changed, 258 insertions(+) create mode 100644 arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts create mode 100644 arch/arm/boot/dts/berlin2.dtsi (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d57c1a6..7d06d64 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -45,6 +45,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm11351-brt.dtb \ bcm28155-ap.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb +dtb-$(CONFIG_ARCH_BERLIN) += \ + berlin2-sony-nsz-gs7.dtb dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \ da850-evm.dtb dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ diff --git a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts new file mode 100644 index 0000000..c72bfd4 --- /dev/null +++ b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts @@ -0,0 +1,29 @@ +/* + * Device Tree file for Sony NSZ-GS7 + * + * Sebastian Hesselbarth + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include "berlin2.dtsi" + +/ { + model = "Sony NSZ-GS7"; + compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; /* 1 GB */ + }; +}; + +&uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi new file mode 100644 index 0000000..56a1af2 --- /dev/null +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -0,0 +1,227 @@ +/* + * Device Tree Include file for Marvell Armada 1500 (Berlin BG2) SoC + * + * Sebastian Hesselbarth + * + * based on GPL'ed 2.6 kernel sources + * (c) Marvell International Ltd. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include "skeleton.dtsi" +#include + +/ { + model = "Marvell Armada 1500 (BG2) SoC"; + compatible = "marvell,berlin2", "marvell,berlin"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "marvell,pj4b"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <0>; + }; + + cpu@1 { + compatible = "marvell,pj4b"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <1>; + }; + }; + + clocks { + smclk: sysmgr-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + cfgclk: cfg-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + sysclk: system-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + + ranges = <0 0xf7000000 0x1000000>; + + l2: l2-cache-controller@ac0000 { + compatible = "marvell,tauros3-cache", "arm,pl310-cache"; + reg = <0xac0000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + gic: interrupt-controller@ad1000 { + compatible = "arm,cortex-a9-gic"; + reg = <0xad1000 0x1000>, <0xad0100 0x0100>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + local-timer@ad0600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xad0600 0x20>; + interrupts = ; + clocks = <&sysclk>; + }; + + apb@e80000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0xe80000 0x10000>; + interrupt-parent = <&aic>; + + timer0: timer@2c00 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c00 0x14>; + interrupts = <8>; + clocks = <&cfgclk>; + clock-names = "timer"; + status = "okay"; + }; + + timer1: timer@2c14 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c14 0x14>; + interrupts = <9>; + clocks = <&cfgclk>; + clock-names = "timer"; + status = "okay"; + }; + + timer2: timer@2c28 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c28 0x14>; + interrupts = <10>; + clocks = <&cfgclk>; + clock-names = "timer"; + status = "disabled"; + }; + + timer3: timer@2c3c { + compatible = "snps,dw-apb-timer"; + reg = <0x2c3c 0x14>; + interrupts = <11>; + clocks = <&cfgclk>; + clock-names = "timer"; + status = "disabled"; + }; + + timer4: timer@2c50 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c50 0x14>; + interrupts = <12>; + clocks = <&cfgclk>; + clock-names = "timer"; + status = "disabled"; + }; + + timer5: timer@2c64 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c64 0x14>; + interrupts = <13>; + clocks = <&cfgclk>; + clock-names = "timer"; + status = "disabled"; + }; + + timer6: timer@2c78 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c78 0x14>; + interrupts = <14>; + clocks = <&cfgclk>; + clock-names = "timer"; + status = "disabled"; + }; + + timer7: timer@2c8c { + compatible = "snps,dw-apb-timer"; + reg = <0x2c8c 0x14>; + interrupts = <15>; + clocks = <&cfgclk>; + clock-names = "timer"; + status = "disabled"; + }; + + aic: interrupt-controller@3000 { + compatible = "snps,dw-apb-ictl"; + reg = <0x3000 0xc00>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = ; + }; + }; + + apb@fc0000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0xfc0000 0x10000>; + interrupt-parent = <&sic>; + + uart0: serial@9000 { + compatible = "snps,dw-apb-uart"; + reg = <0x9000 0x100>; + reg-shift = <2>; + reg-io-width = <1>; + interrupts = <8>; + clocks = <&smclk>; + status = "disabled"; + }; + + uart1: serial@a000 { + compatible = "snps,dw-apb-uart"; + reg = <0xa000 0x100>; + reg-shift = <2>; + reg-io-width = <1>; + interrupts = <9>; + clocks = <&smclk>; + status = "disabled"; + }; + + uart2: serial@b000 { + compatible = "snps,dw-apb-uart"; + reg = <0xb000 0x100>; + reg-shift = <2>; + reg-io-width = <1>; + interrupts = <10>; + clocks = <&smclk>; + status = "disabled"; + }; + + sic: interrupt-controller@e000 { + compatible = "snps,dw-apb-ictl"; + reg = <0xe000 0x400>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = ; + }; + }; + }; +}; -- cgit v1.1 From a90921185fe5db3e02aecf473f0c54343ae17191 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Tue, 5 Nov 2013 12:40:22 +0100 Subject: ARM: add Armada 1500-mini and Chromecast device tree files This adds very basic device tree files for the Marvell Armada 1500-mini SoC (Berlin BG2CD) and the Google Chromecast. Currently, SoC only has nodes for cpu, some clocks, l2 cache controller, local timer, apb timers, uart, and interrupt controllers. The Google Chromecast is a consumer device comprising the Armada 1500-mini SoC above. Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/berlin2cd-google-chromecast.dts | 29 +++ arch/arm/boot/dts/berlin2cd.dtsi | 210 ++++++++++++++++++++++ 3 files changed, 241 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/berlin2cd-google-chromecast.dts create mode 100644 arch/arm/boot/dts/berlin2cd.dtsi (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 7d06d64..5c92212 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -46,7 +46,8 @@ dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm11351-brt.dtb \ bcm28155-ap.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BERLIN) += \ - berlin2-sony-nsz-gs7.dtb + berlin2-sony-nsz-gs7.dtb \ + berlin2cd-google-chromecast.dtb dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \ da850-evm.dtb dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts new file mode 100644 index 0000000..bcd81ff --- /dev/null +++ b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts @@ -0,0 +1,29 @@ +/* + * Device Tree file for Google Chromecast + * + * Sebastian Hesselbarth + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include "berlin2cd.dtsi" + +/ { + model = "Google Chromecast"; + compatible = "google,chromecast", "marvell,berlin2cd", "marvell,berlin"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; +}; + +&uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi new file mode 100644 index 0000000..094968c --- /dev/null +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -0,0 +1,210 @@ +/* + * Device Tree Include file for Marvell Armada 1500-mini (Berlin BG2CD) SoC + * + * Sebastian Hesselbarth + * + * based on GPL'ed 2.6 kernel sources + * (c) Marvell International Ltd. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include "skeleton.dtsi" +#include + +/ { + model = "Marvell Armada 1500-mini (BG2CD) SoC"; + compatible = "marvell,berlin2cd", "marvell,berlin"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <0>; + }; + }; + + clocks { + smclk: sysmgr-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + cfgclk: cfg-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <75000000>; + }; + + sysclk: system-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <300000000>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + + ranges = <0 0xf7000000 0x1000000>; + + l2: l2-cache-controller@ac0000 { + compatible = "arm,pl310-cache"; + reg = <0xac0000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + gic: interrupt-controller@ad1000 { + compatible = "arm,cortex-a9-gic"; + reg = <0xad1000 0x1000>, <0xad0100 0x0100>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + local-timer@ad0600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xad0600 0x20>; + interrupts = ; + clocks = <&sysclk>; + }; + + apb@e80000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0xe80000 0x10000>; + interrupt-parent = <&aic>; + + timer0: timer@2c00 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c00 0x14>; + interrupts = <8>; + clocks = <&cfgclk>; + clock-names = "timer"; + status = "okay"; + }; + + timer1: timer@2c14 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c14 0x14>; + interrupts = <9>; + clocks = <&cfgclk>; + clock-names = "timer"; + status = "okay"; + }; + + timer2: timer@2c28 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c28 0x14>; + interrupts = <10>; + clocks = <&cfgclk>; + clock-names = "timer"; + status = "disabled"; + }; + + timer3: timer@2c3c { + compatible = "snps,dw-apb-timer"; + reg = <0x2c3c 0x14>; + interrupts = <11>; + clocks = <&cfgclk>; + clock-names = "timer"; + status = "disabled"; + }; + + timer4: timer@2c50 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c50 0x14>; + interrupts = <12>; + clocks = <&cfgclk>; + clock-names = "timer"; + status = "disabled"; + }; + + timer5: timer@2c64 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c64 0x14>; + interrupts = <13>; + clocks = <&cfgclk>; + clock-names = "timer"; + status = "disabled"; + }; + + timer6: timer@2c78 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c78 0x14>; + interrupts = <14>; + clocks = <&cfgclk>; + clock-names = "timer"; + status = "disabled"; + }; + + timer7: timer@2c8c { + compatible = "snps,dw-apb-timer"; + reg = <0x2c8c 0x14>; + interrupts = <15>; + clocks = <&cfgclk>; + clock-names = "timer"; + status = "disabled"; + }; + + aic: interrupt-controller@3000 { + compatible = "snps,dw-apb-ictl"; + reg = <0x3000 0xc00>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = ; + }; + }; + + apb@fc0000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0xfc0000 0x10000>; + interrupt-parent = <&sic>; + + uart0: serial@9000 { + compatible = "snps,dw-apb-uart"; + reg = <0x9000 0x100>; + reg-shift = <2>; + reg-io-width = <1>; + interrupts = <8>; + clocks = <&smclk>; + status = "disabled"; + }; + + uart1: serial@a000 { + compatible = "snps,dw-apb-uart"; + reg = <0xa000 0x100>; + reg-shift = <2>; + reg-io-width = <1>; + interrupts = <9>; + clocks = <&smclk>; + status = "disabled"; + }; + + sic: interrupt-controller@e000 { + compatible = "snps,dw-apb-ictl"; + reg = <0xe000 0x400>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = ; + }; + }; + }; +}; -- cgit v1.1 From ef43eff3447f30b4a3cfc61813902c2e57c20245 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 17 Sep 2013 21:08:42 +0200 Subject: ARM: device trees for Energy Micro's EFM32 Cortex-M3 SoCs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/armv7-m.dtsi | 18 ++++ arch/arm/boot/dts/efm32gg-dk3750.dts | 86 ++++++++++++++++++ arch/arm/boot/dts/efm32gg.dtsi | 172 +++++++++++++++++++++++++++++++++++ 4 files changed, 277 insertions(+) create mode 100644 arch/arm/boot/dts/armv7-m.dtsi create mode 100644 arch/arm/boot/dts/efm32gg-dk3750.dts create mode 100644 arch/arm/boot/dts/efm32gg.dtsi (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d57c1a6..e4a0bea 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -52,6 +52,7 @@ dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ dove-d2plug.dtb \ dove-d3plug.dtb \ dove-dove-db.dtb +dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ exynos4210-trats.dtb \ diff --git a/arch/arm/boot/dts/armv7-m.dtsi b/arch/arm/boot/dts/armv7-m.dtsi new file mode 100644 index 0000000..5a660d0 --- /dev/null +++ b/arch/arm/boot/dts/armv7-m.dtsi @@ -0,0 +1,18 @@ +#include "skeleton.dtsi" + +/ { + nvic: nv-interrupt-controller { + compatible = "arm,armv7m-nvic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xe000e100 0xc00>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&nvic>; + ranges; + }; +}; diff --git a/arch/arm/boot/dts/efm32gg-dk3750.dts b/arch/arm/boot/dts/efm32gg-dk3750.dts new file mode 100644 index 0000000..aa5c0f6 --- /dev/null +++ b/arch/arm/boot/dts/efm32gg-dk3750.dts @@ -0,0 +1,86 @@ +/* + * Device tree for EFM32GG-DK3750 development board. + * + * Documentation available from + * http://www.silabs.com/Support%20Documents/TechnicalDocs/efm32gg-dk3750-ug.pdf + */ + +/dts-v1/; +#include "efm32gg.dtsi" + +/ { + model = "Energy Micro Giant Gecko Development Kit"; + compatible = "efm32,dk3750"; + + chosen { + bootargs = "console=ttyefm4,115200 init=/linuxrc ignore_loglevel ihash_entries=64 dhash_entries=64 earlyprintk uclinux.physaddr=0x8c400000 root=/dev/mtdblock0"; + }; + + memory { + reg = <0x88000000 0x400000>; + }; + + soc { + adc@40002000 { + status = "ok"; + }; + + i2c@4000a000 { + location = <3>; + status = "ok"; + + temp@48 { + compatible = "st,stds75"; + reg = <0x48>; + }; + + eeprom@50 { + compatible = "microchip,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + }; + + spi0: spi@4000c000 { /* USART0 */ + cs-gpios = <&gpio 68 1>; // E4 + location = <1>; + status = "ok"; + + microsd@0 { + compatible = "mmc-spi-slot"; + spi-max-frequency = <100000>; + voltage-ranges = <3200 3400>; + broken-cd; + reg = <0>; + }; + }; + + spi1: spi@4000c400 { /* USART1 */ + cs-gpios = <&gpio 51 1>; // D3 + location = <1>; + status = "ok"; + + ks8851@0 { + compatible = "ks8851"; + spi-max-frequency = <6000000>; + reg = <0>; + interrupt-parent = <&boardfpga>; + interrupts = <4>; + }; + }; + + uart4: uart@4000e400 { /* UART1 */ + location = <2>; + status = "ok"; + }; + + boardfpga: boardfpga { + compatible = "efm32board"; + reg = <0x80000000 0x400>; + irq-gpios = <&gpio 64 1>; + interrupt-controller; + #interrupt-cells = <1>; + status = "ok"; + }; + }; +}; diff --git a/arch/arm/boot/dts/efm32gg.dtsi b/arch/arm/boot/dts/efm32gg.dtsi new file mode 100644 index 0000000..a342ab0 --- /dev/null +++ b/arch/arm/boot/dts/efm32gg.dtsi @@ -0,0 +1,172 @@ +/* + * Device tree for Energy Micro EFM32 Giant Gecko SoC. + * + * Documentation available from + * http://www.silabs.com/Support%20Documents/TechnicalDocs/EFM32GG-RM.pdf + */ +#include "armv7-m.dtsi" +#include "dt-bindings/clock/efm32-cmu.h" + +/ { + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + }; + + soc { + adc: adc@40002000 { + compatible = "efm32,adc"; + reg = <0x40002000 0x400>; + interrupts = <7>; + clocks = <&cmu clk_HFPERCLKADC0>; + status = "disabled"; + }; + + gpio: gpio@40006000 { + compatible = "efm32,gpio"; + reg = <0x40006000 0x1000>; + interrupts = <1 11>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + clocks = <&cmu clk_HFPERCLKGPIO>; + status = "ok"; + }; + + i2c0: i2c@4000a000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "efm32,i2c"; + reg = <0x4000a000 0x400>; + interrupts = <9>; + clocks = <&cmu clk_HFPERCLKI2C0>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c1: i2c@4000a400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "efm32,i2c"; + reg = <0x4000a400 0x400>; + interrupts = <10>; + clocks = <&cmu clk_HFPERCLKI2C1>; + clock-frequency = <100000>; + status = "disabled"; + }; + + spi0: spi@4000c000 { /* USART0 */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "efm32,spi"; + reg = <0x4000c000 0x400>; + interrupts = <3 4>; + clocks = <&cmu clk_HFPERCLKUSART0>; + status = "disabled"; + }; + + spi1: spi@4000c400 { /* USART1 */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "efm32,spi"; + reg = <0x4000c400 0x400>; + interrupts = <15 16>; + clocks = <&cmu clk_HFPERCLKUSART1>; + status = "disabled"; + }; + + spi2: spi@40x4000c800 { /* USART2 */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "efm32,spi"; + reg = <0x4000c800 0x400>; + interrupts = <18 19>; + clocks = <&cmu clk_HFPERCLKUSART2>; + status = "disabled"; + }; + + uart0: uart@4000c000 { /* USART0 */ + compatible = "efm32,uart"; + reg = <0x4000c000 0x400>; + interrupts = <3 4>; + clocks = <&cmu clk_HFPERCLKUSART0>; + status = "disabled"; + }; + + uart1: uart@4000c400 { /* USART1 */ + compatible = "efm32,uart"; + reg = <0x4000c400 0x400>; + interrupts = <15 16>; + clocks = <&cmu clk_HFPERCLKUSART1>; + status = "disabled"; + }; + + uart2: uart@40x4000c800 { /* USART2 */ + compatible = "efm32,uart"; + reg = <0x4000c800 0x400>; + interrupts = <18 19>; + clocks = <&cmu clk_HFPERCLKUSART2>; + status = "disabled"; + }; + + uart3: uart@4000e000 { /* UART0 */ + compatible = "efm32,uart"; + reg = <0x4000e000 0x400>; + interrupts = <20 21>; + clocks = <&cmu clk_HFPERCLKUART0>; + status = "disabled"; + }; + + uart4: uart@4000e400 { /* UART1 */ + compatible = "efm32,uart"; + reg = <0x4000e400 0x400>; + interrupts = <22 23>; + clocks = <&cmu clk_HFPERCLKUART1>; + status = "disabled"; + }; + + timer0: timer@40010000 { + compatible = "efm32,timer"; + reg = <0x40010000 0x400>; + interrupts = <2>; + clocks = <&cmu clk_HFPERCLKTIMER0>; + }; + + timer1: timer@40010400 { + compatible = "efm32,timer"; + reg = <0x40010400 0x400>; + interrupts = <12>; + clocks = <&cmu clk_HFPERCLKTIMER1>; + }; + + timer2: timer@40010800 { + compatible = "efm32,timer"; + reg = <0x40010800 0x400>; + interrupts = <13>; + clocks = <&cmu clk_HFPERCLKTIMER2>; + }; + + timer3: timer@40010c00 { + compatible = "efm32,timer"; + reg = <0x40010c00 0x400>; + interrupts = <14>; + clocks = <&cmu clk_HFPERCLKTIMER3>; + }; + + cmu: cmu@400c8000 { + compatible = "efm32gg,cmu"; + reg = <0x400c8000 0x400>; + interrupts = <32>; + #clock-cells = <1>; + }; + }; +}; -- cgit v1.1 From fa8962a8bb84cad2902cc7e2f3682cbc7450ab86 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Wed, 11 Dec 2013 15:54:51 +0800 Subject: ARM: dts: enable hi4511 with device tree Enable Hisilicon Hi4511 development platform with device tree support. Signed-off-by: Haojian Zhuang Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/hi3620.dtsi | 518 +++++++++++++++++++++++++++++++++ arch/arm/boot/dts/hi4511.dts | 648 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1167 insertions(+) create mode 100644 arch/arm/boot/dts/hi3620.dtsi create mode 100644 arch/arm/boot/dts/hi4511.dts (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d57c1a6..a4c771f 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -66,6 +66,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos5420-smdk5420.dtb \ exynos5440-sd5v1.dtb \ exynos5440-ssdk5440.dtb +dtb-$(CONFIG_ARCH_HI3xxx) += hi4511.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ ecx-2000.dtb dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi new file mode 100644 index 0000000..b9d8679 --- /dev/null +++ b/arch/arm/boot/dts/hi3620.dtsi @@ -0,0 +1,518 @@ +/* + * Hisilicon Ltd. Hi3620 SoC + * + * Copyright (C) 2012-2013 Hisilicon Ltd. + * Copyright (C) 2012-2013 Linaro Ltd. + * + * Author: Haojian Zhuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +/include/ "skeleton.dtsi" + +/ { + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + }; + + pclk: clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "apb_pclk"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + }; + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + interrupt-parent = <&gic>; + ranges = <0 0xfc000000 0x2000000>; + + L2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0xfc10000 0x100000>; + interrupts = <0 15 4>; + cache-unified; + cache-level = <2>; + }; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + /* gic dist base, gic cpu base */ + reg = <0x1000 0x1000>, <0x100 0x100>; + }; + + dual_timer0: dual_timer@800000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x800000 0x1000>; + /* timer00 & timer01 */ + interrupts = <0 0 4>, <0 1 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + dual_timer1: dual_timer@801000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x801000 0x1000>; + /* timer10 & timer11 */ + interrupts = <0 2 4>, <0 3 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + dual_timer2: dual_timer@a01000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0xa01000 0x1000>; + /* timer20 & timer21 */ + interrupts = <0 4 4>, <0 5 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + dual_timer3: dual_timer@a02000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0xa02000 0x1000>; + /* timer30 & timer31 */ + interrupts = <0 6 4>, <0 7 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + dual_timer4: dual_timer@a03000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0xa03000 0x1000>; + /* timer40 & timer41 */ + interrupts = <0 96 4>, <0 97 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart0: uart@b00000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb00000 0x1000>; + interrupts = <0 20 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart1: uart@b01000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb01000 0x1000>; + interrupts = <0 21 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart2: uart@b02000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb02000 0x1000>; + interrupts = <0 22 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart3: uart@b03000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb03000 0x1000>; + interrupts = <0 23 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart4: uart@b04000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb04000 0x1000>; + interrupts = <0 24 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio0: gpio@806000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x806000 0x1000>; + interrupts = <0 64 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 2 0 1 &pmx0 3 0 1 &pmx0 4 0 1 + &pmx0 5 0 1 &pmx0 6 1 1 &pmx0 7 2 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio1: gpio@807000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x807000 0x1000>; + interrupts = <0 65 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1 + &pmx0 3 3 1 &pmx0 4 3 1 &pmx0 5 4 1 + &pmx0 6 5 1 &pmx0 7 6 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio2: gpio@808000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x808000 0x1000>; + interrupts = <0 66 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 7 1 &pmx0 1 8 1 &pmx0 2 9 1 + &pmx0 3 10 1 &pmx0 4 3 1 &pmx0 5 3 1 + &pmx0 6 3 1 &pmx0 7 3 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio3: gpio@809000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x809000 0x1000>; + interrupts = <0 67 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1 + &pmx0 3 3 1 &pmx0 4 11 1 &pmx0 5 11 1 + &pmx0 6 11 1 &pmx0 7 11 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio4: gpio@80a000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x80a000 0x1000>; + interrupts = <0 68 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 11 1 &pmx0 1 11 1 &pmx0 2 11 1 + &pmx0 3 11 1 &pmx0 4 12 1 &pmx0 5 12 1 + &pmx0 6 13 1 &pmx0 7 13 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio5: gpio@80b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x80b000 0x1000>; + interrupts = <0 69 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 14 1 &pmx0 1 15 1 &pmx0 2 16 1 + &pmx0 3 16 1 &pmx0 4 16 1 &pmx0 5 16 1 + &pmx0 6 16 1 &pmx0 7 16 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio6: gpio@80c000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x80c000 0x1000>; + interrupts = <0 70 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 16 1 &pmx0 1 16 1 &pmx0 2 17 1 + &pmx0 3 17 1 &pmx0 4 18 1 &pmx0 5 18 1 + &pmx0 6 18 1 &pmx0 7 19 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio7: gpio@80d000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x80d000 0x1000>; + interrupts = <0 71 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 19 1 &pmx0 1 20 1 &pmx0 2 21 1 + &pmx0 3 22 1 &pmx0 4 23 1 &pmx0 5 24 1 + &pmx0 6 25 1 &pmx0 7 26 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio8: gpio@80e000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x80e000 0x1000>; + interrupts = <0 72 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 27 1 &pmx0 1 28 1 &pmx0 2 29 1 + &pmx0 3 30 1 &pmx0 4 31 1 &pmx0 5 32 1 + &pmx0 6 33 1 &pmx0 7 34 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio9: gpio@80f000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x80f000 0x1000>; + interrupts = <0 73 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 35 1 &pmx0 1 36 1 &pmx0 2 37 1 + &pmx0 3 38 1 &pmx0 4 39 1 &pmx0 5 40 1 + &pmx0 6 41 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio10: gpio@810000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x810000 0x1000>; + interrupts = <0 74 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 2 43 1 &pmx0 3 44 1 &pmx0 4 45 1 + &pmx0 5 45 1 &pmx0 6 46 1 &pmx0 7 46 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio11: gpio@811000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x811000 0x1000>; + interrupts = <0 75 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 47 1 &pmx0 1 47 1 &pmx0 2 47 1 + &pmx0 3 47 1 &pmx0 4 47 1 &pmx0 5 48 1 + &pmx0 6 49 1 &pmx0 7 49 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio12: gpio@812000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x812000 0x1000>; + interrupts = <0 76 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 49 1 &pmx0 1 50 1 &pmx0 2 49 1 + &pmx0 3 49 1 &pmx0 4 51 1 &pmx0 5 51 1 + &pmx0 6 51 1 &pmx0 7 52 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio13: gpio@813000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x813000 0x1000>; + interrupts = <0 77 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 51 1 &pmx0 1 51 1 &pmx0 2 53 1 + &pmx0 3 53 1 &pmx0 4 53 1 &pmx0 5 54 1 + &pmx0 6 55 1 &pmx0 7 56 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio14: gpio@814000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x814000 0x1000>; + interrupts = <0 78 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 57 1 &pmx0 1 97 1 &pmx0 2 97 1 + &pmx0 3 58 1 &pmx0 4 59 1 &pmx0 5 60 1 + &pmx0 6 60 1 &pmx0 7 61 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio15: gpio@815000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x815000 0x1000>; + interrupts = <0 79 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 61 1 &pmx0 1 62 1 &pmx0 2 62 1 + &pmx0 3 63 1 &pmx0 4 63 1 &pmx0 5 64 1 + &pmx0 6 64 1 &pmx0 7 65 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio16: gpio@816000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x816000 0x1000>; + interrupts = <0 80 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 66 1 &pmx0 1 67 1 &pmx0 2 68 1 + &pmx0 3 69 1 &pmx0 4 70 1 &pmx0 5 71 1 + &pmx0 6 72 1 &pmx0 7 73 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio17: gpio@817000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x817000 0x1000>; + interrupts = <0 81 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 74 1 &pmx0 1 75 1 &pmx0 2 76 1 + &pmx0 3 77 1 &pmx0 4 78 1 &pmx0 5 79 1 + &pmx0 6 80 1 &pmx0 7 81 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio18: gpio@818000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x818000 0x1000>; + interrupts = <0 82 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 82 1 &pmx0 1 83 1 &pmx0 2 83 1 + &pmx0 3 84 1 &pmx0 4 84 1 &pmx0 5 85 1 + &pmx0 6 86 1 &pmx0 7 87 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio19: gpio@819000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x819000 0x1000>; + interrupts = <0 83 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 87 1 &pmx0 1 87 1 &pmx0 2 88 1 + &pmx0 3 88 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio20: gpio@81a000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x81a000 0x1000>; + interrupts = <0 84 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 89 1 &pmx0 1 89 1 &pmx0 2 90 1 + &pmx0 3 90 1 &pmx0 4 91 1 &pmx0 5 92 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio21: gpio@81b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x81b000 0x1000>; + interrupts = <0 85 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 3 94 1 &pmx0 7 96 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + pmx0: pinmux@803000 { + compatible = "pinctrl-single"; + reg = <0x803000 0x188>; + #address-cells = <1>; + #size-cells = <1>; + #gpio-range-cells = <3>; + ranges; + + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <7>; + /* pin base, nr pins & gpio function */ + pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1 + &range 12 1 0 &range 13 29 1 + &range 43 1 0 &range 44 49 1 + &range 94 1 1 &range 96 2 1>; + + range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; + }; + + pmx1: pinmux@803800 { + compatible = "pinconf-single"; + reg = <0x803800 0x2dc>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pinctrl-single,register-width = <32>; + }; + }; +}; diff --git a/arch/arm/boot/dts/hi4511.dts b/arch/arm/boot/dts/hi4511.dts new file mode 100644 index 0000000..96e69ab --- /dev/null +++ b/arch/arm/boot/dts/hi4511.dts @@ -0,0 +1,648 @@ +/* + * Copyright (C) 2012-2013 Linaro Ltd. + * Author: Haojian Zhuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +/dts-v1/; +/include/ "hi3620.dtsi" + +/ { + model = "Hisilicon Hi4511 Development Board"; + compatible = "hisilicon,hi3620-hi4511"; + + chosen { + bootargs = "console=ttyAMA0,115200 root=/dev/ram0 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x40000000 0x20000000>; + }; + + amba { + dual_timer0: dual_timer@800000 { + status = "ok"; + }; + + uart0: uart@b00000 { /* console */ + pinctrl-names = "default", "idle"; + pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>; + pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>; + status = "ok"; + }; + + uart1: uart@b01000 { /* modem */ + pinctrl-names = "default", "idle"; + pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>; + pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>; + status = "ok"; + }; + + uart2: uart@b02000 { /* audience */ + pinctrl-names = "default", "idle"; + pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>; + pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>; + status = "ok"; + }; + + uart3: uart@b03000 { + pinctrl-names = "default", "idle"; + pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>; + pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>; + status = "ok"; + }; + + uart4: uart@b04000 { + pinctrl-names = "default", "idle"; + pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>; + pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>; + status = "ok"; + }; + + pmx0: pinmux@803000 { + pinctrl-names = "default"; + pinctrl-0 = <&board_pmx_pins>; + + board_pmx_pins: board_pmx_pins { + pinctrl-single,pins = < + 0x008 0x0 /* GPIO -- eFUSE_DOUT */ + 0x100 0x0 /* USIM_CLK & USIM_DATA (IOMG63) */ + >; + }; + uart0_pmx_func: uart0_pmx_func { + pinctrl-single,pins = < + 0x0f0 0x0 + 0x0f4 0x0 /* UART0_RX & UART0_TX */ + >; + }; + uart0_pmx_idle: uart0_pmx_idle { + pinctrl-single,pins = < + /*0x0f0 0x1*/ /* UART0_CTS & UART0_RTS */ + 0x0f4 0x1 /* UART0_RX & UART0_TX */ + >; + }; + uart1_pmx_func: uart1_pmx_func { + pinctrl-single,pins = < + 0x0f8 0x0 /* UART1_CTS & UART1_RTS (IOMG61) */ + 0x0fc 0x0 /* UART1_RX & UART1_TX (IOMG62) */ + >; + }; + uart1_pmx_idle: uart1_pmx_idle { + pinctrl-single,pins = < + 0x0f8 0x1 /* GPIO (IOMG61) */ + 0x0fc 0x1 /* GPIO (IOMG62) */ + >; + }; + uart2_pmx_func: uart2_pmx_func { + pinctrl-single,pins = < + 0x104 0x2 /* UART2_RXD (IOMG96) */ + 0x108 0x2 /* UART2_TXD (IOMG64) */ + >; + }; + uart2_pmx_idle: uart2_pmx_idle { + pinctrl-single,pins = < + 0x104 0x1 /* GPIO (IOMG96) */ + 0x108 0x1 /* GPIO (IOMG64) */ + >; + }; + uart3_pmx_func: uart3_pmx_func { + pinctrl-single,pins = < + 0x160 0x2 /* UART3_CTS & UART3_RTS (IOMG85) */ + 0x164 0x2 /* UART3_RXD & UART3_TXD (IOMG86) */ + >; + }; + uart3_pmx_idle: uart3_pmx_idle { + pinctrl-single,pins = < + 0x160 0x1 /* GPIO (IOMG85) */ + 0x164 0x1 /* GPIO (IOMG86) */ + >; + }; + uart4_pmx_func: uart4_pmx_func { + pinctrl-single,pins = < + 0x168 0x0 /* UART4_CTS & UART4_RTS (IOMG87) */ + 0x16c 0x0 /* UART4_RXD (IOMG88) */ + 0x170 0x0 /* UART4_TXD (IOMG93) */ + >; + }; + uart4_pmx_idle: uart4_pmx_idle { + pinctrl-single,pins = < + 0x168 0x1 /* GPIO (IOMG87) */ + 0x16c 0x1 /* GPIO (IOMG88) */ + 0x170 0x1 /* GPIO (IOMG93) */ + >; + }; + i2c0_pmx_func: i2c0_pmx_func { + pinctrl-single,pins = < + 0x0b4 0x0 /* I2C0_SCL & I2C0_SDA (IOMG45) */ + >; + }; + i2c0_pmx_idle: i2c0_pmx_idle { + pinctrl-single,pins = < + 0x0b4 0x1 /* GPIO (IOMG45) */ + >; + }; + i2c1_pmx_func: i2c1_pmx_func { + pinctrl-single,pins = < + 0x0b8 0x0 /* I2C1_SCL & I2C1_SDA (IOMG46) */ + >; + }; + i2c1_pmx_idle: i2c1_pmx_idle { + pinctrl-single,pins = < + 0x0b8 0x1 /* GPIO (IOMG46) */ + >; + }; + i2c2_pmx_func: i2c2_pmx_func { + pinctrl-single,pins = < + 0x068 0x0 /* I2C2_SCL (IOMG26) */ + 0x06c 0x0 /* I2C2_SDA (IOMG27) */ + >; + }; + i2c2_pmx_idle: i2c2_pmx_idle { + pinctrl-single,pins = < + 0x068 0x1 /* GPIO (IOMG26) */ + 0x06c 0x1 /* GPIO (IOMG27) */ + >; + }; + i2c3_pmx_func: i2c3_pmx_func { + pinctrl-single,pins = < + 0x050 0x2 /* I2C3_SCL (IOMG20) */ + 0x054 0x2 /* I2C3_SDA (IOMG21) */ + >; + }; + i2c3_pmx_idle: i2c3_pmx_idle { + pinctrl-single,pins = < + 0x050 0x1 /* GPIO (IOMG20) */ + 0x054 0x1 /* GPIO (IOMG21) */ + >; + }; + spi0_pmx_func: spi0_pmx_func { + pinctrl-single,pins = < + 0x0d4 0x0 /* SPI0_CLK/SPI0_DI/SPI0_DO (IOMG53) */ + 0x0d8 0x0 /* SPI0_CS0 (IOMG54) */ + 0x0dc 0x0 /* SPI0_CS1 (IOMG55) */ + 0x0e0 0x0 /* SPI0_CS2 (IOMG56) */ + 0x0e4 0x0 /* SPI0_CS3 (IOMG57) */ + >; + }; + spi0_pmx_idle: spi0_pmx_idle { + pinctrl-single,pins = < + 0x0d4 0x1 /* GPIO (IOMG53) */ + 0x0d8 0x1 /* GPIO (IOMG54) */ + 0x0dc 0x1 /* GPIO (IOMG55) */ + 0x0e0 0x1 /* GPIO (IOMG56) */ + 0x0e4 0x1 /* GPIO (IOMG57) */ + >; + }; + spi1_pmx_func: spi1_pmx_func { + pinctrl-single,pins = < + 0x184 0x0 /* SPI1_CLK/SPI1_DI (IOMG98) */ + 0x0e8 0x0 /* SPI1_DO (IOMG58) */ + 0x0ec 0x0 /* SPI1_CS (IOMG95) */ + >; + }; + spi1_pmx_idle: spi1_pmx_idle { + pinctrl-single,pins = < + 0x184 0x1 /* GPIO (IOMG98) */ + 0x0e8 0x1 /* GPIO (IOMG58) */ + 0x0ec 0x1 /* GPIO (IOMG95) */ + >; + }; + kpc_pmx_func: kpc_pmx_func { + pinctrl-single,pins = < + 0x12c 0x0 /* KEY_IN0 (IOMG73) */ + 0x130 0x0 /* KEY_IN1 (IOMG74) */ + 0x134 0x0 /* KEY_IN2 (IOMG75) */ + 0x10c 0x0 /* KEY_OUT0 (IOMG65) */ + 0x110 0x0 /* KEY_OUT1 (IOMG66) */ + 0x114 0x0 /* KEY_OUT2 (IOMG67) */ + >; + }; + kpc_pmx_idle: kpc_pmx_idle { + pinctrl-single,pins = < + 0x12c 0x1 /* GPIO (IOMG73) */ + 0x130 0x1 /* GPIO (IOMG74) */ + 0x134 0x1 /* GPIO (IOMG75) */ + 0x10c 0x1 /* GPIO (IOMG65) */ + 0x110 0x1 /* GPIO (IOMG66) */ + 0x114 0x1 /* GPIO (IOMG67) */ + >; + }; + gpio_key_func: gpio_key_func { + pinctrl-single,pins = < + 0x10c 0x1 /* KEY_OUT0/GPIO (IOMG65) */ + 0x130 0x1 /* KEY_IN1/GPIO (IOMG74) */ + >; + }; + emmc_pmx_func: emmc_pmx_func { + pinctrl-single,pins = < + 0x030 0x2 /* eMMC_CMD/eMMC_CLK (IOMG12) */ + 0x018 0x0 /* NAND_CS3_N (IOMG6) */ + 0x024 0x0 /* NAND_BUSY2_N (IOMG8) */ + 0x028 0x0 /* NAND_BUSY3_N (IOMG9) */ + 0x02c 0x2 /* eMMC_DATA[0:7] (IOMG10) */ + >; + }; + emmc_pmx_idle: emmc_pmx_idle { + pinctrl-single,pins = < + 0x030 0x0 /* GPIO (IOMG12) */ + 0x018 0x1 /* GPIO (IOMG6) */ + 0x024 0x1 /* GPIO (IOMG8) */ + 0x028 0x1 /* GPIO (IOMG9) */ + 0x02c 0x1 /* GPIO (IOMG10) */ + >; + }; + sd_pmx_func: sd_pmx_func { + pinctrl-single,pins = < + 0x0bc 0x0 /* SD_CLK/SD_CMD/SD_DATA0/SD_DATA1/SD_DATA2 (IOMG47) */ + 0x0c0 0x0 /* SD_DATA3 (IOMG48) */ + >; + }; + sd_pmx_idle: sd_pmx_idle { + pinctrl-single,pins = < + 0x0bc 0x1 /* GPIO (IOMG47) */ + 0x0c0 0x1 /* GPIO (IOMG48) */ + >; + }; + nand_pmx_func: nand_pmx_func { + pinctrl-single,pins = < + 0x00c 0x0 /* NAND_ALE/NAND_CLE/.../NAND_DATA[0:7] (IOMG3) */ + 0x010 0x0 /* NAND_CS1_N (IOMG4) */ + 0x014 0x0 /* NAND_CS2_N (IOMG5) */ + 0x018 0x0 /* NAND_CS3_N (IOMG6) */ + 0x01c 0x0 /* NAND_BUSY0_N (IOMG94) */ + 0x020 0x0 /* NAND_BUSY1_N (IOMG7) */ + 0x024 0x0 /* NAND_BUSY2_N (IOMG8) */ + 0x028 0x0 /* NAND_BUSY3_N (IOMG9) */ + 0x02c 0x0 /* NAND_DATA[8:15] (IOMG10) */ + >; + }; + nand_pmx_idle: nand_pmx_idle { + pinctrl-single,pins = < + 0x00c 0x1 /* GPIO (IOMG3) */ + 0x010 0x1 /* GPIO (IOMG4) */ + 0x014 0x1 /* GPIO (IOMG5) */ + 0x018 0x1 /* GPIO (IOMG6) */ + 0x01c 0x1 /* GPIO (IOMG94) */ + 0x020 0x1 /* GPIO (IOMG7) */ + 0x024 0x1 /* GPIO (IOMG8) */ + 0x028 0x1 /* GPIO (IOMG9) */ + 0x02c 0x1 /* GPIO (IOMG10) */ + >; + }; + sdio_pmx_func: sdio_pmx_func { + pinctrl-single,pins = < + 0x0c4 0x0 /* SDIO_CLK/SDIO_CMD/SDIO_DATA[0:3] (IOMG49) */ + >; + }; + sdio_pmx_idle: sdio_pmx_idle { + pinctrl-single,pins = < + 0x0c4 0x1 /* GPIO (IOMG49) */ + >; + }; + audio_out_pmx_func: audio_out_pmx_func { + pinctrl-single,pins = < + 0x0f0 0x1 /* GPIO (IOMG59), audio spk & earphone */ + >; + }; + }; + + pmx1: pinmux@803800 { + pinctrl-names = "default"; + pinctrl-0 = < &board_pu_pins &board_pd_pins &board_pd_ps_pins + &board_np_pins &board_ps_pins &kpc_cfg_func + &audio_out_cfg_func>; + board_pu_pins: board_pu_pins { + pinctrl-single,pins = < + 0x014 0 /* GPIO_158 (IOCFG2) */ + 0x018 0 /* GPIO_159 (IOCFG3) */ + 0x01c 0 /* BOOT_MODE0 (IOCFG4) */ + 0x020 0 /* BOOT_MODE1 (IOCFG5) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <1 1 0 1>; + }; + board_pd_pins: board_pd_pins { + pinctrl-single,pins = < + 0x038 0 /* eFUSE_DOUT (IOCFG11) */ + 0x150 0 /* ISP_GPIO8 (IOCFG93) */ + 0x154 0 /* ISP_GPIO9 (IOCFG94) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + board_pd_ps_pins: board_pd_ps_pins { + pinctrl-single,pins = < + 0x2d8 0 /* CLK_OUT0 (IOCFG190) */ + 0x004 0 /* PMU_SPI_DATA (IOCFG192) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + board_np_pins: board_np_pins { + pinctrl-single,pins = < + 0x24c 0 /* KEYPAD_OUT7 (IOCFG155) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + board_ps_pins: board_ps_pins { + pinctrl-single,pins = < + 0x000 0 /* PMU_SPI_CLK (IOCFG191) */ + 0x008 0 /* PMU_SPI_CS_N (IOCFG193) */ + >; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + uart0_cfg_func: uart0_cfg_func { + pinctrl-single,pins = < + 0x208 0 /* UART0_RXD (IOCFG138) */ + 0x20c 0 /* UART0_TXD (IOCFG139) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + uart0_cfg_idle: uart0_cfg_idle { + pinctrl-single,pins = < + 0x208 0 /* UART0_RXD (IOCFG138) */ + 0x20c 0 /* UART0_TXD (IOCFG139) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + uart1_cfg_func: uart1_cfg_func { + pinctrl-single,pins = < + 0x210 0 /* UART1_CTS (IOCFG140) */ + 0x214 0 /* UART1_RTS (IOCFG141) */ + 0x218 0 /* UART1_RXD (IOCFG142) */ + 0x21c 0 /* UART1_TXD (IOCFG143) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + uart1_cfg_idle: uart1_cfg_idle { + pinctrl-single,pins = < + 0x210 0 /* UART1_CTS (IOCFG140) */ + 0x214 0 /* UART1_RTS (IOCFG141) */ + 0x218 0 /* UART1_RXD (IOCFG142) */ + 0x21c 0 /* UART1_TXD (IOCFG143) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + uart2_cfg_func: uart2_cfg_func { + pinctrl-single,pins = < + 0x220 0 /* UART2_CTS (IOCFG144) */ + 0x224 0 /* UART2_RTS (IOCFG145) */ + 0x228 0 /* UART2_RXD (IOCFG146) */ + 0x22c 0 /* UART2_TXD (IOCFG147) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + uart2_cfg_idle: uart2_cfg_idle { + pinctrl-single,pins = < + 0x220 0 /* GPIO (IOCFG144) */ + 0x224 0 /* GPIO (IOCFG145) */ + 0x228 0 /* GPIO (IOCFG146) */ + 0x22c 0 /* GPIO (IOCFG147) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + uart3_cfg_func: uart3_cfg_func { + pinctrl-single,pins = < + 0x294 0 /* UART3_CTS (IOCFG173) */ + 0x298 0 /* UART3_RTS (IOCFG174) */ + 0x29c 0 /* UART3_RXD (IOCFG175) */ + 0x2a0 0 /* UART3_TXD (IOCFG176) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + uart3_cfg_idle: uart3_cfg_idle { + pinctrl-single,pins = < + 0x294 0 /* UART3_CTS (IOCFG173) */ + 0x298 0 /* UART3_RTS (IOCFG174) */ + 0x29c 0 /* UART3_RXD (IOCFG175) */ + 0x2a0 0 /* UART3_TXD (IOCFG176) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + uart4_cfg_func: uart4_cfg_func { + pinctrl-single,pins = < + 0x2a4 0 /* UART4_CTS (IOCFG177) */ + 0x2a8 0 /* UART4_RTS (IOCFG178) */ + 0x2ac 0 /* UART4_RXD (IOCFG179) */ + 0x2b0 0 /* UART4_TXD (IOCFG180) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + i2c0_cfg_func: i2c0_cfg_func { + pinctrl-single,pins = < + 0x17c 0 /* I2C0_SCL (IOCFG103) */ + 0x180 0 /* I2C0_SDA (IOCFG104) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + i2c1_cfg_func: i2c1_cfg_func { + pinctrl-single,pins = < + 0x184 0 /* I2C1_SCL (IOCFG105) */ + 0x188 0 /* I2C1_SDA (IOCFG106) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + i2c2_cfg_func: i2c2_cfg_func { + pinctrl-single,pins = < + 0x118 0 /* I2C2_SCL (IOCFG79) */ + 0x11c 0 /* I2C2_SDA (IOCFG80) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + i2c3_cfg_func: i2c3_cfg_func { + pinctrl-single,pins = < + 0x100 0 /* I2C3_SCL (IOCFG73) */ + 0x104 0 /* I2C3_SDA (IOCFG74) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + spi0_cfg_func1: spi0_cfg_func1 { + pinctrl-single,pins = < + 0x1d4 0 /* SPI0_CLK (IOCFG125) */ + 0x1d8 0 /* SPI0_DI (IOCFG126) */ + 0x1dc 0 /* SPI0_DO (IOCFG127) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + spi0_cfg_func2: spi0_cfg_func2 { + pinctrl-single,pins = < + 0x1e0 0 /* SPI0_CS0 (IOCFG128) */ + 0x1e4 0 /* SPI0_CS1 (IOCFG129) */ + 0x1e8 0 /* SPI0_CS2 (IOCFG130 */ + 0x1ec 0 /* SPI0_CS3 (IOCFG131) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <1 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + spi1_cfg_func1: spi1_cfg_func1 { + pinctrl-single,pins = < + 0x1f0 0 /* SPI1_CLK (IOCFG132) */ + 0x1f4 0 /* SPI1_DI (IOCFG133) */ + 0x1f8 0 /* SPI1_DO (IOCFG134) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + spi1_cfg_func2: spi1_cfg_func2 { + pinctrl-single,pins = < + 0x1fc 0 /* SPI1_CS (IOCFG135) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <1 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + kpc_cfg_func: kpc_cfg_func { + pinctrl-single,pins = < + 0x250 0 /* KEY_IN0 (IOCFG156) */ + 0x254 0 /* KEY_IN1 (IOCFG157) */ + 0x258 0 /* KEY_IN2 (IOCFG158) */ + 0x230 0 /* KEY_OUT0 (IOCFG148) */ + 0x234 0 /* KEY_OUT1 (IOCFG149) */ + 0x238 0 /* KEY_OUT2 (IOCFG150) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + emmc_cfg_func: emmc_cfg_func { + pinctrl-single,pins = < + 0x0ac 0 /* eMMC_CMD (IOCFG40) */ + 0x0b0 0 /* eMMC_CLK (IOCFG41) */ + 0x058 0 /* NAND_CS3_N (IOCFG19) */ + 0x064 0 /* NAND_BUSY2_N (IOCFG22) */ + 0x068 0 /* NAND_BUSY3_N (IOCFG23) */ + 0x08c 0 /* NAND_DATA8 (IOCFG32) */ + 0x090 0 /* NAND_DATA9 (IOCFG33) */ + 0x094 0 /* NAND_DATA10 (IOCFG34) */ + 0x098 0 /* NAND_DATA11 (IOCFG35) */ + 0x09c 0 /* NAND_DATA12 (IOCFG36) */ + 0x0a0 0 /* NAND_DATA13 (IOCFG37) */ + 0x0a4 0 /* NAND_DATA14 (IOCFG38) */ + 0x0a8 0 /* NAND_DATA15 (IOCFG39) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <1 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + sd_cfg_func1: sd_cfg_func1 { + pinctrl-single,pins = < + 0x18c 0 /* SD_CLK (IOCFG107) */ + 0x190 0 /* SD_CMD (IOCFG108) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + sd_cfg_func2: sd_cfg_func2 { + pinctrl-single,pins = < + 0x194 0 /* SD_DATA0 (IOCFG109) */ + 0x198 0 /* SD_DATA1 (IOCFG110) */ + 0x19c 0 /* SD_DATA2 (IOCFG111) */ + 0x1a0 0 /* SD_DATA3 (IOCFG112) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x70 0xf0>; + }; + nand_cfg_func1: nand_cfg_func1 { + pinctrl-single,pins = < + 0x03c 0 /* NAND_ALE (IOCFG12) */ + 0x040 0 /* NAND_CLE (IOCFG13) */ + 0x06c 0 /* NAND_DATA0 (IOCFG24) */ + 0x070 0 /* NAND_DATA1 (IOCFG25) */ + 0x074 0 /* NAND_DATA2 (IOCFG26) */ + 0x078 0 /* NAND_DATA3 (IOCFG27) */ + 0x07c 0 /* NAND_DATA4 (IOCFG28) */ + 0x080 0 /* NAND_DATA5 (IOCFG29) */ + 0x084 0 /* NAND_DATA6 (IOCFG30) */ + 0x088 0 /* NAND_DATA7 (IOCFG31) */ + 0x08c 0 /* NAND_DATA8 (IOCFG32) */ + 0x090 0 /* NAND_DATA9 (IOCFG33) */ + 0x094 0 /* NAND_DATA10 (IOCFG34) */ + 0x098 0 /* NAND_DATA11 (IOCFG35) */ + 0x09c 0 /* NAND_DATA12 (IOCFG36) */ + 0x0a0 0 /* NAND_DATA13 (IOCFG37) */ + 0x0a4 0 /* NAND_DATA14 (IOCFG38) */ + 0x0a8 0 /* NAND_DATA15 (IOCFG39) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + nand_cfg_func2: nand_cfg_func2 { + pinctrl-single,pins = < + 0x044 0 /* NAND_RE_N (IOCFG14) */ + 0x048 0 /* NAND_WE_N (IOCFG15) */ + 0x04c 0 /* NAND_CS0_N (IOCFG16) */ + 0x050 0 /* NAND_CS1_N (IOCFG17) */ + 0x054 0 /* NAND_CS2_N (IOCFG18) */ + 0x058 0 /* NAND_CS3_N (IOCFG19) */ + 0x05c 0 /* NAND_BUSY0_N (IOCFG20) */ + 0x060 0 /* NAND_BUSY1_N (IOCFG21) */ + 0x064 0 /* NAND_BUSY2_N (IOCFG22) */ + 0x068 0 /* NAND_BUSY3_N (IOCFG23) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <1 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + sdio_cfg_func: sdio_cfg_func { + pinctrl-single,pins = < + 0x1a4 0 /* SDIO0_CLK (IOCG113) */ + 0x1a8 0 /* SDIO0_CMD (IOCG114) */ + 0x1ac 0 /* SDIO0_DATA0 (IOCG115) */ + 0x1b0 0 /* SDIO0_DATA1 (IOCG116) */ + 0x1b4 0 /* SDIO0_DATA2 (IOCG117) */ + 0x1b8 0 /* SDIO0_DATA3 (IOCG118) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + audio_out_cfg_func: audio_out_cfg_func { + pinctrl-single,pins = < + 0x200 0 /* GPIO (IOCFG136) */ + 0x204 0 /* GPIO (IOCFG137) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + call { + label = "call"; + gpios = <&gpio17 2 0>; + linux,code = <169>; /* KEY_PHONE */ + }; + }; +}; -- cgit v1.1 From a9434e96d9f089e778b440217f815c8e85daf317 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 17 Dec 2013 16:23:49 -0800 Subject: ARM: hi3xxx: add smp support Enable SMP support on hi3xxx platform Signed-off-by: Zhangfei Gao Tested-by: Zhang Mingjun Tested-by: Li Xin Signed-off-by: Haojian Zhuang [khilman: fix checkpatch errors] Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/hi3620.dtsi | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi index b9d8679..e311937 100644 --- a/arch/arm/boot/dts/hi3620.dtsi +++ b/arch/arm/boot/dts/hi3620.dtsi @@ -39,6 +39,27 @@ reg = <0x0>; next-level-cache = <&L2>; }; + + cpu@1 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + }; + + cpu@2 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <2>; + next-level-cache = <&L2>; + }; + + cpu@3 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <3>; + next-level-cache = <&L2>; + }; }; amba { @@ -65,6 +86,17 @@ reg = <0x1000 0x1000>, <0x100 0x100>; }; + sysctrl: system-controller@802000 { + compatible = "hisilicon,sysctrl"; + reg = <0x802000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + smp-offset = <0x31c>; + resume-offset = <0x308>; + reboot-offset = <0x4>; + }; + dual_timer0: dual_timer@800000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x800000 0x1000>; @@ -115,6 +147,12 @@ status = "disabled"; }; + timer5: timer@600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x600 0x20>; + interrupts = <1 13 0xf01>; + }; + uart0: uart@b00000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xb00000 0x1000>; -- cgit v1.1 From 22e99a6d43f2ccd1d1a28c65a803bb71ea293098 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Wed, 11 Dec 2013 15:54:56 +0800 Subject: ARM: dts: enable clock binding on Hi3620 Enable clock binding for Hi3620 common clock driver. Signed-off-by: Haojian Zhuang Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/hi3620.dtsi | 79 ++++++++++++++++++++++++------------------- arch/arm/boot/dts/hi4511.dts | 3 +- 2 files changed, 46 insertions(+), 36 deletions(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi index e311937..ab1116d 100644 --- a/arch/arm/boot/dts/hi3620.dtsi +++ b/arch/arm/boot/dts/hi3620.dtsi @@ -11,7 +11,8 @@ * publishhed by the Free Software Foundation. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include / { aliases { @@ -63,6 +64,7 @@ }; amba { + #address-cells = <1>; #size-cells = <1>; compatible = "arm,amba-bus"; @@ -88,13 +90,20 @@ sysctrl: system-controller@802000 { compatible = "hisilicon,sysctrl"; - reg = <0x802000 0x1000>; #address-cells = <1>; - #size-cells = <0>; + #size-cells = <1>; + ranges = <0 0x802000 0x1000>; + reg = <0x802000 0x1000>; smp-offset = <0x31c>; resume-offset = <0x308>; reboot-offset = <0x4>; + + clock: clock@0 { + compatible = "hisilicon,hi3620-clock"; + reg = <0 0x10000>; + #clock-cells = <1>; + }; }; dual_timer0: dual_timer@800000 { @@ -102,7 +111,7 @@ reg = <0x800000 0x1000>; /* timer00 & timer01 */ interrupts = <0 0 4>, <0 1 4>; - clocks = <&pclk>; + clocks = <&clock HI3620_TIMER0_MUX>, <&clock HI3620_TIMER1_MUX>; clock-names = "apb_pclk"; status = "disabled"; }; @@ -112,7 +121,7 @@ reg = <0x801000 0x1000>; /* timer10 & timer11 */ interrupts = <0 2 4>, <0 3 4>; - clocks = <&pclk>; + clocks = <&clock HI3620_TIMER2_MUX>, <&clock HI3620_TIMER3_MUX>; clock-names = "apb_pclk"; status = "disabled"; }; @@ -122,7 +131,7 @@ reg = <0xa01000 0x1000>; /* timer20 & timer21 */ interrupts = <0 4 4>, <0 5 4>; - clocks = <&pclk>; + clocks = <&clock HI3620_TIMER4_MUX>, <&clock HI3620_TIMER5_MUX>; clock-names = "apb_pclk"; status = "disabled"; }; @@ -132,7 +141,7 @@ reg = <0xa02000 0x1000>; /* timer30 & timer31 */ interrupts = <0 6 4>, <0 7 4>; - clocks = <&pclk>; + clocks = <&clock HI3620_TIMER6_MUX>, <&clock HI3620_TIMER7_MUX>; clock-names = "apb_pclk"; status = "disabled"; }; @@ -142,7 +151,7 @@ reg = <0xa03000 0x1000>; /* timer40 & timer41 */ interrupts = <0 96 4>, <0 97 4>; - clocks = <&pclk>; + clocks = <&clock HI3620_TIMER8_MUX>, <&clock HI3620_TIMER9_MUX>; clock-names = "apb_pclk"; status = "disabled"; }; @@ -157,7 +166,7 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0xb00000 0x1000>; interrupts = <0 20 4>; - clocks = <&pclk>; + clocks = <&clock HI3620_UARTCLK0>; clock-names = "apb_pclk"; status = "disabled"; }; @@ -166,7 +175,7 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0xb01000 0x1000>; interrupts = <0 21 4>; - clocks = <&pclk>; + clocks = <&clock HI3620_UARTCLK1>; clock-names = "apb_pclk"; status = "disabled"; }; @@ -175,7 +184,7 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0xb02000 0x1000>; interrupts = <0 22 4>; - clocks = <&pclk>; + clocks = <&clock HI3620_UARTCLK2>; clock-names = "apb_pclk"; status = "disabled"; }; @@ -184,7 +193,7 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0xb03000 0x1000>; interrupts = <0 23 4>; - clocks = <&pclk>; + clocks = <&clock HI3620_UARTCLK3>; clock-names = "apb_pclk"; status = "disabled"; }; @@ -193,7 +202,7 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0xb04000 0x1000>; interrupts = <0 24 4>; - clocks = <&pclk>; + clocks = <&clock HI3620_UARTCLK4>; clock-names = "apb_pclk"; status = "disabled"; }; @@ -208,7 +217,7 @@ &pmx0 5 0 1 &pmx0 6 1 1 &pmx0 7 2 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK0>; clock-names = "apb_pclk"; }; @@ -223,7 +232,7 @@ &pmx0 6 5 1 &pmx0 7 6 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK1>; clock-names = "apb_pclk"; }; @@ -238,7 +247,7 @@ &pmx0 6 3 1 &pmx0 7 3 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK2>; clock-names = "apb_pclk"; }; @@ -253,7 +262,7 @@ &pmx0 6 11 1 &pmx0 7 11 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK3>; clock-names = "apb_pclk"; }; @@ -268,7 +277,7 @@ &pmx0 6 13 1 &pmx0 7 13 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK4>; clock-names = "apb_pclk"; }; @@ -283,7 +292,7 @@ &pmx0 6 16 1 &pmx0 7 16 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK5>; clock-names = "apb_pclk"; }; @@ -298,7 +307,7 @@ &pmx0 6 18 1 &pmx0 7 19 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK6>; clock-names = "apb_pclk"; }; @@ -313,7 +322,7 @@ &pmx0 6 25 1 &pmx0 7 26 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK7>; clock-names = "apb_pclk"; }; @@ -328,7 +337,7 @@ &pmx0 6 33 1 &pmx0 7 34 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK8>; clock-names = "apb_pclk"; }; @@ -343,7 +352,7 @@ &pmx0 6 41 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK9>; clock-names = "apb_pclk"; }; @@ -357,7 +366,7 @@ &pmx0 5 45 1 &pmx0 6 46 1 &pmx0 7 46 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK10>; clock-names = "apb_pclk"; }; @@ -372,7 +381,7 @@ &pmx0 6 49 1 &pmx0 7 49 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK11>; clock-names = "apb_pclk"; }; @@ -387,7 +396,7 @@ &pmx0 6 51 1 &pmx0 7 52 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK12>; clock-names = "apb_pclk"; }; @@ -402,7 +411,7 @@ &pmx0 6 55 1 &pmx0 7 56 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK13>; clock-names = "apb_pclk"; }; @@ -417,7 +426,7 @@ &pmx0 6 60 1 &pmx0 7 61 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK14>; clock-names = "apb_pclk"; }; @@ -432,7 +441,7 @@ &pmx0 6 64 1 &pmx0 7 65 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK15>; clock-names = "apb_pclk"; }; @@ -447,7 +456,7 @@ &pmx0 6 72 1 &pmx0 7 73 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK16>; clock-names = "apb_pclk"; }; @@ -462,7 +471,7 @@ &pmx0 6 80 1 &pmx0 7 81 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK17>; clock-names = "apb_pclk"; }; @@ -477,7 +486,7 @@ &pmx0 6 86 1 &pmx0 7 87 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK18>; clock-names = "apb_pclk"; }; @@ -491,7 +500,7 @@ &pmx0 3 88 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK19>; clock-names = "apb_pclk"; }; @@ -505,7 +514,7 @@ &pmx0 3 90 1 &pmx0 4 91 1 &pmx0 5 92 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK20>; clock-names = "apb_pclk"; }; @@ -518,7 +527,7 @@ gpio-ranges = < &pmx0 3 94 1 &pmx0 7 96 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK21>; clock-names = "apb_pclk"; }; diff --git a/arch/arm/boot/dts/hi4511.dts b/arch/arm/boot/dts/hi4511.dts index 96e69ab..fe62392 100644 --- a/arch/arm/boot/dts/hi4511.dts +++ b/arch/arm/boot/dts/hi4511.dts @@ -8,7 +8,8 @@ */ /dts-v1/; -/include/ "hi3620.dtsi" + +#include "hi3620.dtsi" / { model = "Hisilicon Hi4511 Development Board"; -- cgit v1.1 From 0cfb1c8bec551c8eb7c6b263baebc9537d2b910c Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Fri, 20 Dec 2013 10:52:58 +0800 Subject: ARM: dts: rename hi4511 dts file We want to follow the name style of DTS that is SoC-board.dts. Signed-off-by: Haojian Zhuang Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/Makefile | 2 +- arch/arm/boot/dts/hi3620-hi4511.dts | 649 ++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/hi4511.dts | 649 ------------------------------------ 3 files changed, 650 insertions(+), 650 deletions(-) create mode 100644 arch/arm/boot/dts/hi3620-hi4511.dts delete mode 100644 arch/arm/boot/dts/hi4511.dts (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a4c771f..d0b92db 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -66,7 +66,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos5420-smdk5420.dtb \ exynos5440-sd5v1.dtb \ exynos5440-ssdk5440.dtb -dtb-$(CONFIG_ARCH_HI3xxx) += hi4511.dtb +dtb-$(CONFIG_ARCH_HI3xxx) += hi3620-hi4511.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ ecx-2000.dtb dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hi3620-hi4511.dts new file mode 100644 index 0000000..fe62392 --- /dev/null +++ b/arch/arm/boot/dts/hi3620-hi4511.dts @@ -0,0 +1,649 @@ +/* + * Copyright (C) 2012-2013 Linaro Ltd. + * Author: Haojian Zhuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +/dts-v1/; + +#include "hi3620.dtsi" + +/ { + model = "Hisilicon Hi4511 Development Board"; + compatible = "hisilicon,hi3620-hi4511"; + + chosen { + bootargs = "console=ttyAMA0,115200 root=/dev/ram0 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x40000000 0x20000000>; + }; + + amba { + dual_timer0: dual_timer@800000 { + status = "ok"; + }; + + uart0: uart@b00000 { /* console */ + pinctrl-names = "default", "idle"; + pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>; + pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>; + status = "ok"; + }; + + uart1: uart@b01000 { /* modem */ + pinctrl-names = "default", "idle"; + pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>; + pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>; + status = "ok"; + }; + + uart2: uart@b02000 { /* audience */ + pinctrl-names = "default", "idle"; + pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>; + pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>; + status = "ok"; + }; + + uart3: uart@b03000 { + pinctrl-names = "default", "idle"; + pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>; + pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>; + status = "ok"; + }; + + uart4: uart@b04000 { + pinctrl-names = "default", "idle"; + pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>; + pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>; + status = "ok"; + }; + + pmx0: pinmux@803000 { + pinctrl-names = "default"; + pinctrl-0 = <&board_pmx_pins>; + + board_pmx_pins: board_pmx_pins { + pinctrl-single,pins = < + 0x008 0x0 /* GPIO -- eFUSE_DOUT */ + 0x100 0x0 /* USIM_CLK & USIM_DATA (IOMG63) */ + >; + }; + uart0_pmx_func: uart0_pmx_func { + pinctrl-single,pins = < + 0x0f0 0x0 + 0x0f4 0x0 /* UART0_RX & UART0_TX */ + >; + }; + uart0_pmx_idle: uart0_pmx_idle { + pinctrl-single,pins = < + /*0x0f0 0x1*/ /* UART0_CTS & UART0_RTS */ + 0x0f4 0x1 /* UART0_RX & UART0_TX */ + >; + }; + uart1_pmx_func: uart1_pmx_func { + pinctrl-single,pins = < + 0x0f8 0x0 /* UART1_CTS & UART1_RTS (IOMG61) */ + 0x0fc 0x0 /* UART1_RX & UART1_TX (IOMG62) */ + >; + }; + uart1_pmx_idle: uart1_pmx_idle { + pinctrl-single,pins = < + 0x0f8 0x1 /* GPIO (IOMG61) */ + 0x0fc 0x1 /* GPIO (IOMG62) */ + >; + }; + uart2_pmx_func: uart2_pmx_func { + pinctrl-single,pins = < + 0x104 0x2 /* UART2_RXD (IOMG96) */ + 0x108 0x2 /* UART2_TXD (IOMG64) */ + >; + }; + uart2_pmx_idle: uart2_pmx_idle { + pinctrl-single,pins = < + 0x104 0x1 /* GPIO (IOMG96) */ + 0x108 0x1 /* GPIO (IOMG64) */ + >; + }; + uart3_pmx_func: uart3_pmx_func { + pinctrl-single,pins = < + 0x160 0x2 /* UART3_CTS & UART3_RTS (IOMG85) */ + 0x164 0x2 /* UART3_RXD & UART3_TXD (IOMG86) */ + >; + }; + uart3_pmx_idle: uart3_pmx_idle { + pinctrl-single,pins = < + 0x160 0x1 /* GPIO (IOMG85) */ + 0x164 0x1 /* GPIO (IOMG86) */ + >; + }; + uart4_pmx_func: uart4_pmx_func { + pinctrl-single,pins = < + 0x168 0x0 /* UART4_CTS & UART4_RTS (IOMG87) */ + 0x16c 0x0 /* UART4_RXD (IOMG88) */ + 0x170 0x0 /* UART4_TXD (IOMG93) */ + >; + }; + uart4_pmx_idle: uart4_pmx_idle { + pinctrl-single,pins = < + 0x168 0x1 /* GPIO (IOMG87) */ + 0x16c 0x1 /* GPIO (IOMG88) */ + 0x170 0x1 /* GPIO (IOMG93) */ + >; + }; + i2c0_pmx_func: i2c0_pmx_func { + pinctrl-single,pins = < + 0x0b4 0x0 /* I2C0_SCL & I2C0_SDA (IOMG45) */ + >; + }; + i2c0_pmx_idle: i2c0_pmx_idle { + pinctrl-single,pins = < + 0x0b4 0x1 /* GPIO (IOMG45) */ + >; + }; + i2c1_pmx_func: i2c1_pmx_func { + pinctrl-single,pins = < + 0x0b8 0x0 /* I2C1_SCL & I2C1_SDA (IOMG46) */ + >; + }; + i2c1_pmx_idle: i2c1_pmx_idle { + pinctrl-single,pins = < + 0x0b8 0x1 /* GPIO (IOMG46) */ + >; + }; + i2c2_pmx_func: i2c2_pmx_func { + pinctrl-single,pins = < + 0x068 0x0 /* I2C2_SCL (IOMG26) */ + 0x06c 0x0 /* I2C2_SDA (IOMG27) */ + >; + }; + i2c2_pmx_idle: i2c2_pmx_idle { + pinctrl-single,pins = < + 0x068 0x1 /* GPIO (IOMG26) */ + 0x06c 0x1 /* GPIO (IOMG27) */ + >; + }; + i2c3_pmx_func: i2c3_pmx_func { + pinctrl-single,pins = < + 0x050 0x2 /* I2C3_SCL (IOMG20) */ + 0x054 0x2 /* I2C3_SDA (IOMG21) */ + >; + }; + i2c3_pmx_idle: i2c3_pmx_idle { + pinctrl-single,pins = < + 0x050 0x1 /* GPIO (IOMG20) */ + 0x054 0x1 /* GPIO (IOMG21) */ + >; + }; + spi0_pmx_func: spi0_pmx_func { + pinctrl-single,pins = < + 0x0d4 0x0 /* SPI0_CLK/SPI0_DI/SPI0_DO (IOMG53) */ + 0x0d8 0x0 /* SPI0_CS0 (IOMG54) */ + 0x0dc 0x0 /* SPI0_CS1 (IOMG55) */ + 0x0e0 0x0 /* SPI0_CS2 (IOMG56) */ + 0x0e4 0x0 /* SPI0_CS3 (IOMG57) */ + >; + }; + spi0_pmx_idle: spi0_pmx_idle { + pinctrl-single,pins = < + 0x0d4 0x1 /* GPIO (IOMG53) */ + 0x0d8 0x1 /* GPIO (IOMG54) */ + 0x0dc 0x1 /* GPIO (IOMG55) */ + 0x0e0 0x1 /* GPIO (IOMG56) */ + 0x0e4 0x1 /* GPIO (IOMG57) */ + >; + }; + spi1_pmx_func: spi1_pmx_func { + pinctrl-single,pins = < + 0x184 0x0 /* SPI1_CLK/SPI1_DI (IOMG98) */ + 0x0e8 0x0 /* SPI1_DO (IOMG58) */ + 0x0ec 0x0 /* SPI1_CS (IOMG95) */ + >; + }; + spi1_pmx_idle: spi1_pmx_idle { + pinctrl-single,pins = < + 0x184 0x1 /* GPIO (IOMG98) */ + 0x0e8 0x1 /* GPIO (IOMG58) */ + 0x0ec 0x1 /* GPIO (IOMG95) */ + >; + }; + kpc_pmx_func: kpc_pmx_func { + pinctrl-single,pins = < + 0x12c 0x0 /* KEY_IN0 (IOMG73) */ + 0x130 0x0 /* KEY_IN1 (IOMG74) */ + 0x134 0x0 /* KEY_IN2 (IOMG75) */ + 0x10c 0x0 /* KEY_OUT0 (IOMG65) */ + 0x110 0x0 /* KEY_OUT1 (IOMG66) */ + 0x114 0x0 /* KEY_OUT2 (IOMG67) */ + >; + }; + kpc_pmx_idle: kpc_pmx_idle { + pinctrl-single,pins = < + 0x12c 0x1 /* GPIO (IOMG73) */ + 0x130 0x1 /* GPIO (IOMG74) */ + 0x134 0x1 /* GPIO (IOMG75) */ + 0x10c 0x1 /* GPIO (IOMG65) */ + 0x110 0x1 /* GPIO (IOMG66) */ + 0x114 0x1 /* GPIO (IOMG67) */ + >; + }; + gpio_key_func: gpio_key_func { + pinctrl-single,pins = < + 0x10c 0x1 /* KEY_OUT0/GPIO (IOMG65) */ + 0x130 0x1 /* KEY_IN1/GPIO (IOMG74) */ + >; + }; + emmc_pmx_func: emmc_pmx_func { + pinctrl-single,pins = < + 0x030 0x2 /* eMMC_CMD/eMMC_CLK (IOMG12) */ + 0x018 0x0 /* NAND_CS3_N (IOMG6) */ + 0x024 0x0 /* NAND_BUSY2_N (IOMG8) */ + 0x028 0x0 /* NAND_BUSY3_N (IOMG9) */ + 0x02c 0x2 /* eMMC_DATA[0:7] (IOMG10) */ + >; + }; + emmc_pmx_idle: emmc_pmx_idle { + pinctrl-single,pins = < + 0x030 0x0 /* GPIO (IOMG12) */ + 0x018 0x1 /* GPIO (IOMG6) */ + 0x024 0x1 /* GPIO (IOMG8) */ + 0x028 0x1 /* GPIO (IOMG9) */ + 0x02c 0x1 /* GPIO (IOMG10) */ + >; + }; + sd_pmx_func: sd_pmx_func { + pinctrl-single,pins = < + 0x0bc 0x0 /* SD_CLK/SD_CMD/SD_DATA0/SD_DATA1/SD_DATA2 (IOMG47) */ + 0x0c0 0x0 /* SD_DATA3 (IOMG48) */ + >; + }; + sd_pmx_idle: sd_pmx_idle { + pinctrl-single,pins = < + 0x0bc 0x1 /* GPIO (IOMG47) */ + 0x0c0 0x1 /* GPIO (IOMG48) */ + >; + }; + nand_pmx_func: nand_pmx_func { + pinctrl-single,pins = < + 0x00c 0x0 /* NAND_ALE/NAND_CLE/.../NAND_DATA[0:7] (IOMG3) */ + 0x010 0x0 /* NAND_CS1_N (IOMG4) */ + 0x014 0x0 /* NAND_CS2_N (IOMG5) */ + 0x018 0x0 /* NAND_CS3_N (IOMG6) */ + 0x01c 0x0 /* NAND_BUSY0_N (IOMG94) */ + 0x020 0x0 /* NAND_BUSY1_N (IOMG7) */ + 0x024 0x0 /* NAND_BUSY2_N (IOMG8) */ + 0x028 0x0 /* NAND_BUSY3_N (IOMG9) */ + 0x02c 0x0 /* NAND_DATA[8:15] (IOMG10) */ + >; + }; + nand_pmx_idle: nand_pmx_idle { + pinctrl-single,pins = < + 0x00c 0x1 /* GPIO (IOMG3) */ + 0x010 0x1 /* GPIO (IOMG4) */ + 0x014 0x1 /* GPIO (IOMG5) */ + 0x018 0x1 /* GPIO (IOMG6) */ + 0x01c 0x1 /* GPIO (IOMG94) */ + 0x020 0x1 /* GPIO (IOMG7) */ + 0x024 0x1 /* GPIO (IOMG8) */ + 0x028 0x1 /* GPIO (IOMG9) */ + 0x02c 0x1 /* GPIO (IOMG10) */ + >; + }; + sdio_pmx_func: sdio_pmx_func { + pinctrl-single,pins = < + 0x0c4 0x0 /* SDIO_CLK/SDIO_CMD/SDIO_DATA[0:3] (IOMG49) */ + >; + }; + sdio_pmx_idle: sdio_pmx_idle { + pinctrl-single,pins = < + 0x0c4 0x1 /* GPIO (IOMG49) */ + >; + }; + audio_out_pmx_func: audio_out_pmx_func { + pinctrl-single,pins = < + 0x0f0 0x1 /* GPIO (IOMG59), audio spk & earphone */ + >; + }; + }; + + pmx1: pinmux@803800 { + pinctrl-names = "default"; + pinctrl-0 = < &board_pu_pins &board_pd_pins &board_pd_ps_pins + &board_np_pins &board_ps_pins &kpc_cfg_func + &audio_out_cfg_func>; + board_pu_pins: board_pu_pins { + pinctrl-single,pins = < + 0x014 0 /* GPIO_158 (IOCFG2) */ + 0x018 0 /* GPIO_159 (IOCFG3) */ + 0x01c 0 /* BOOT_MODE0 (IOCFG4) */ + 0x020 0 /* BOOT_MODE1 (IOCFG5) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <1 1 0 1>; + }; + board_pd_pins: board_pd_pins { + pinctrl-single,pins = < + 0x038 0 /* eFUSE_DOUT (IOCFG11) */ + 0x150 0 /* ISP_GPIO8 (IOCFG93) */ + 0x154 0 /* ISP_GPIO9 (IOCFG94) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + board_pd_ps_pins: board_pd_ps_pins { + pinctrl-single,pins = < + 0x2d8 0 /* CLK_OUT0 (IOCFG190) */ + 0x004 0 /* PMU_SPI_DATA (IOCFG192) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + board_np_pins: board_np_pins { + pinctrl-single,pins = < + 0x24c 0 /* KEYPAD_OUT7 (IOCFG155) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + board_ps_pins: board_ps_pins { + pinctrl-single,pins = < + 0x000 0 /* PMU_SPI_CLK (IOCFG191) */ + 0x008 0 /* PMU_SPI_CS_N (IOCFG193) */ + >; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + uart0_cfg_func: uart0_cfg_func { + pinctrl-single,pins = < + 0x208 0 /* UART0_RXD (IOCFG138) */ + 0x20c 0 /* UART0_TXD (IOCFG139) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + uart0_cfg_idle: uart0_cfg_idle { + pinctrl-single,pins = < + 0x208 0 /* UART0_RXD (IOCFG138) */ + 0x20c 0 /* UART0_TXD (IOCFG139) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + uart1_cfg_func: uart1_cfg_func { + pinctrl-single,pins = < + 0x210 0 /* UART1_CTS (IOCFG140) */ + 0x214 0 /* UART1_RTS (IOCFG141) */ + 0x218 0 /* UART1_RXD (IOCFG142) */ + 0x21c 0 /* UART1_TXD (IOCFG143) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + uart1_cfg_idle: uart1_cfg_idle { + pinctrl-single,pins = < + 0x210 0 /* UART1_CTS (IOCFG140) */ + 0x214 0 /* UART1_RTS (IOCFG141) */ + 0x218 0 /* UART1_RXD (IOCFG142) */ + 0x21c 0 /* UART1_TXD (IOCFG143) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + uart2_cfg_func: uart2_cfg_func { + pinctrl-single,pins = < + 0x220 0 /* UART2_CTS (IOCFG144) */ + 0x224 0 /* UART2_RTS (IOCFG145) */ + 0x228 0 /* UART2_RXD (IOCFG146) */ + 0x22c 0 /* UART2_TXD (IOCFG147) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + uart2_cfg_idle: uart2_cfg_idle { + pinctrl-single,pins = < + 0x220 0 /* GPIO (IOCFG144) */ + 0x224 0 /* GPIO (IOCFG145) */ + 0x228 0 /* GPIO (IOCFG146) */ + 0x22c 0 /* GPIO (IOCFG147) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + uart3_cfg_func: uart3_cfg_func { + pinctrl-single,pins = < + 0x294 0 /* UART3_CTS (IOCFG173) */ + 0x298 0 /* UART3_RTS (IOCFG174) */ + 0x29c 0 /* UART3_RXD (IOCFG175) */ + 0x2a0 0 /* UART3_TXD (IOCFG176) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + uart3_cfg_idle: uart3_cfg_idle { + pinctrl-single,pins = < + 0x294 0 /* UART3_CTS (IOCFG173) */ + 0x298 0 /* UART3_RTS (IOCFG174) */ + 0x29c 0 /* UART3_RXD (IOCFG175) */ + 0x2a0 0 /* UART3_TXD (IOCFG176) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + uart4_cfg_func: uart4_cfg_func { + pinctrl-single,pins = < + 0x2a4 0 /* UART4_CTS (IOCFG177) */ + 0x2a8 0 /* UART4_RTS (IOCFG178) */ + 0x2ac 0 /* UART4_RXD (IOCFG179) */ + 0x2b0 0 /* UART4_TXD (IOCFG180) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + i2c0_cfg_func: i2c0_cfg_func { + pinctrl-single,pins = < + 0x17c 0 /* I2C0_SCL (IOCFG103) */ + 0x180 0 /* I2C0_SDA (IOCFG104) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + i2c1_cfg_func: i2c1_cfg_func { + pinctrl-single,pins = < + 0x184 0 /* I2C1_SCL (IOCFG105) */ + 0x188 0 /* I2C1_SDA (IOCFG106) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + i2c2_cfg_func: i2c2_cfg_func { + pinctrl-single,pins = < + 0x118 0 /* I2C2_SCL (IOCFG79) */ + 0x11c 0 /* I2C2_SDA (IOCFG80) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + i2c3_cfg_func: i2c3_cfg_func { + pinctrl-single,pins = < + 0x100 0 /* I2C3_SCL (IOCFG73) */ + 0x104 0 /* I2C3_SDA (IOCFG74) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + spi0_cfg_func1: spi0_cfg_func1 { + pinctrl-single,pins = < + 0x1d4 0 /* SPI0_CLK (IOCFG125) */ + 0x1d8 0 /* SPI0_DI (IOCFG126) */ + 0x1dc 0 /* SPI0_DO (IOCFG127) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + spi0_cfg_func2: spi0_cfg_func2 { + pinctrl-single,pins = < + 0x1e0 0 /* SPI0_CS0 (IOCFG128) */ + 0x1e4 0 /* SPI0_CS1 (IOCFG129) */ + 0x1e8 0 /* SPI0_CS2 (IOCFG130 */ + 0x1ec 0 /* SPI0_CS3 (IOCFG131) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <1 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + spi1_cfg_func1: spi1_cfg_func1 { + pinctrl-single,pins = < + 0x1f0 0 /* SPI1_CLK (IOCFG132) */ + 0x1f4 0 /* SPI1_DI (IOCFG133) */ + 0x1f8 0 /* SPI1_DO (IOCFG134) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + spi1_cfg_func2: spi1_cfg_func2 { + pinctrl-single,pins = < + 0x1fc 0 /* SPI1_CS (IOCFG135) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <1 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + kpc_cfg_func: kpc_cfg_func { + pinctrl-single,pins = < + 0x250 0 /* KEY_IN0 (IOCFG156) */ + 0x254 0 /* KEY_IN1 (IOCFG157) */ + 0x258 0 /* KEY_IN2 (IOCFG158) */ + 0x230 0 /* KEY_OUT0 (IOCFG148) */ + 0x234 0 /* KEY_OUT1 (IOCFG149) */ + 0x238 0 /* KEY_OUT2 (IOCFG150) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + emmc_cfg_func: emmc_cfg_func { + pinctrl-single,pins = < + 0x0ac 0 /* eMMC_CMD (IOCFG40) */ + 0x0b0 0 /* eMMC_CLK (IOCFG41) */ + 0x058 0 /* NAND_CS3_N (IOCFG19) */ + 0x064 0 /* NAND_BUSY2_N (IOCFG22) */ + 0x068 0 /* NAND_BUSY3_N (IOCFG23) */ + 0x08c 0 /* NAND_DATA8 (IOCFG32) */ + 0x090 0 /* NAND_DATA9 (IOCFG33) */ + 0x094 0 /* NAND_DATA10 (IOCFG34) */ + 0x098 0 /* NAND_DATA11 (IOCFG35) */ + 0x09c 0 /* NAND_DATA12 (IOCFG36) */ + 0x0a0 0 /* NAND_DATA13 (IOCFG37) */ + 0x0a4 0 /* NAND_DATA14 (IOCFG38) */ + 0x0a8 0 /* NAND_DATA15 (IOCFG39) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <1 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + sd_cfg_func1: sd_cfg_func1 { + pinctrl-single,pins = < + 0x18c 0 /* SD_CLK (IOCFG107) */ + 0x190 0 /* SD_CMD (IOCFG108) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + sd_cfg_func2: sd_cfg_func2 { + pinctrl-single,pins = < + 0x194 0 /* SD_DATA0 (IOCFG109) */ + 0x198 0 /* SD_DATA1 (IOCFG110) */ + 0x19c 0 /* SD_DATA2 (IOCFG111) */ + 0x1a0 0 /* SD_DATA3 (IOCFG112) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x70 0xf0>; + }; + nand_cfg_func1: nand_cfg_func1 { + pinctrl-single,pins = < + 0x03c 0 /* NAND_ALE (IOCFG12) */ + 0x040 0 /* NAND_CLE (IOCFG13) */ + 0x06c 0 /* NAND_DATA0 (IOCFG24) */ + 0x070 0 /* NAND_DATA1 (IOCFG25) */ + 0x074 0 /* NAND_DATA2 (IOCFG26) */ + 0x078 0 /* NAND_DATA3 (IOCFG27) */ + 0x07c 0 /* NAND_DATA4 (IOCFG28) */ + 0x080 0 /* NAND_DATA5 (IOCFG29) */ + 0x084 0 /* NAND_DATA6 (IOCFG30) */ + 0x088 0 /* NAND_DATA7 (IOCFG31) */ + 0x08c 0 /* NAND_DATA8 (IOCFG32) */ + 0x090 0 /* NAND_DATA9 (IOCFG33) */ + 0x094 0 /* NAND_DATA10 (IOCFG34) */ + 0x098 0 /* NAND_DATA11 (IOCFG35) */ + 0x09c 0 /* NAND_DATA12 (IOCFG36) */ + 0x0a0 0 /* NAND_DATA13 (IOCFG37) */ + 0x0a4 0 /* NAND_DATA14 (IOCFG38) */ + 0x0a8 0 /* NAND_DATA15 (IOCFG39) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + nand_cfg_func2: nand_cfg_func2 { + pinctrl-single,pins = < + 0x044 0 /* NAND_RE_N (IOCFG14) */ + 0x048 0 /* NAND_WE_N (IOCFG15) */ + 0x04c 0 /* NAND_CS0_N (IOCFG16) */ + 0x050 0 /* NAND_CS1_N (IOCFG17) */ + 0x054 0 /* NAND_CS2_N (IOCFG18) */ + 0x058 0 /* NAND_CS3_N (IOCFG19) */ + 0x05c 0 /* NAND_BUSY0_N (IOCFG20) */ + 0x060 0 /* NAND_BUSY1_N (IOCFG21) */ + 0x064 0 /* NAND_BUSY2_N (IOCFG22) */ + 0x068 0 /* NAND_BUSY3_N (IOCFG23) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <1 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + sdio_cfg_func: sdio_cfg_func { + pinctrl-single,pins = < + 0x1a4 0 /* SDIO0_CLK (IOCG113) */ + 0x1a8 0 /* SDIO0_CMD (IOCG114) */ + 0x1ac 0 /* SDIO0_DATA0 (IOCG115) */ + 0x1b0 0 /* SDIO0_DATA1 (IOCG116) */ + 0x1b4 0 /* SDIO0_DATA2 (IOCG117) */ + 0x1b8 0 /* SDIO0_DATA3 (IOCG118) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + audio_out_cfg_func: audio_out_cfg_func { + pinctrl-single,pins = < + 0x200 0 /* GPIO (IOCFG136) */ + 0x204 0 /* GPIO (IOCFG137) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + call { + label = "call"; + gpios = <&gpio17 2 0>; + linux,code = <169>; /* KEY_PHONE */ + }; + }; +}; diff --git a/arch/arm/boot/dts/hi4511.dts b/arch/arm/boot/dts/hi4511.dts deleted file mode 100644 index fe62392..0000000 --- a/arch/arm/boot/dts/hi4511.dts +++ /dev/null @@ -1,649 +0,0 @@ -/* - * Copyright (C) 2012-2013 Linaro Ltd. - * Author: Haojian Zhuang - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ - -/dts-v1/; - -#include "hi3620.dtsi" - -/ { - model = "Hisilicon Hi4511 Development Board"; - compatible = "hisilicon,hi3620-hi4511"; - - chosen { - bootargs = "console=ttyAMA0,115200 root=/dev/ram0 earlyprintk"; - }; - - memory { - device_type = "memory"; - reg = <0x40000000 0x20000000>; - }; - - amba { - dual_timer0: dual_timer@800000 { - status = "ok"; - }; - - uart0: uart@b00000 { /* console */ - pinctrl-names = "default", "idle"; - pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>; - pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>; - status = "ok"; - }; - - uart1: uart@b01000 { /* modem */ - pinctrl-names = "default", "idle"; - pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>; - pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>; - status = "ok"; - }; - - uart2: uart@b02000 { /* audience */ - pinctrl-names = "default", "idle"; - pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>; - pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>; - status = "ok"; - }; - - uart3: uart@b03000 { - pinctrl-names = "default", "idle"; - pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>; - pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>; - status = "ok"; - }; - - uart4: uart@b04000 { - pinctrl-names = "default", "idle"; - pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>; - pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>; - status = "ok"; - }; - - pmx0: pinmux@803000 { - pinctrl-names = "default"; - pinctrl-0 = <&board_pmx_pins>; - - board_pmx_pins: board_pmx_pins { - pinctrl-single,pins = < - 0x008 0x0 /* GPIO -- eFUSE_DOUT */ - 0x100 0x0 /* USIM_CLK & USIM_DATA (IOMG63) */ - >; - }; - uart0_pmx_func: uart0_pmx_func { - pinctrl-single,pins = < - 0x0f0 0x0 - 0x0f4 0x0 /* UART0_RX & UART0_TX */ - >; - }; - uart0_pmx_idle: uart0_pmx_idle { - pinctrl-single,pins = < - /*0x0f0 0x1*/ /* UART0_CTS & UART0_RTS */ - 0x0f4 0x1 /* UART0_RX & UART0_TX */ - >; - }; - uart1_pmx_func: uart1_pmx_func { - pinctrl-single,pins = < - 0x0f8 0x0 /* UART1_CTS & UART1_RTS (IOMG61) */ - 0x0fc 0x0 /* UART1_RX & UART1_TX (IOMG62) */ - >; - }; - uart1_pmx_idle: uart1_pmx_idle { - pinctrl-single,pins = < - 0x0f8 0x1 /* GPIO (IOMG61) */ - 0x0fc 0x1 /* GPIO (IOMG62) */ - >; - }; - uart2_pmx_func: uart2_pmx_func { - pinctrl-single,pins = < - 0x104 0x2 /* UART2_RXD (IOMG96) */ - 0x108 0x2 /* UART2_TXD (IOMG64) */ - >; - }; - uart2_pmx_idle: uart2_pmx_idle { - pinctrl-single,pins = < - 0x104 0x1 /* GPIO (IOMG96) */ - 0x108 0x1 /* GPIO (IOMG64) */ - >; - }; - uart3_pmx_func: uart3_pmx_func { - pinctrl-single,pins = < - 0x160 0x2 /* UART3_CTS & UART3_RTS (IOMG85) */ - 0x164 0x2 /* UART3_RXD & UART3_TXD (IOMG86) */ - >; - }; - uart3_pmx_idle: uart3_pmx_idle { - pinctrl-single,pins = < - 0x160 0x1 /* GPIO (IOMG85) */ - 0x164 0x1 /* GPIO (IOMG86) */ - >; - }; - uart4_pmx_func: uart4_pmx_func { - pinctrl-single,pins = < - 0x168 0x0 /* UART4_CTS & UART4_RTS (IOMG87) */ - 0x16c 0x0 /* UART4_RXD (IOMG88) */ - 0x170 0x0 /* UART4_TXD (IOMG93) */ - >; - }; - uart4_pmx_idle: uart4_pmx_idle { - pinctrl-single,pins = < - 0x168 0x1 /* GPIO (IOMG87) */ - 0x16c 0x1 /* GPIO (IOMG88) */ - 0x170 0x1 /* GPIO (IOMG93) */ - >; - }; - i2c0_pmx_func: i2c0_pmx_func { - pinctrl-single,pins = < - 0x0b4 0x0 /* I2C0_SCL & I2C0_SDA (IOMG45) */ - >; - }; - i2c0_pmx_idle: i2c0_pmx_idle { - pinctrl-single,pins = < - 0x0b4 0x1 /* GPIO (IOMG45) */ - >; - }; - i2c1_pmx_func: i2c1_pmx_func { - pinctrl-single,pins = < - 0x0b8 0x0 /* I2C1_SCL & I2C1_SDA (IOMG46) */ - >; - }; - i2c1_pmx_idle: i2c1_pmx_idle { - pinctrl-single,pins = < - 0x0b8 0x1 /* GPIO (IOMG46) */ - >; - }; - i2c2_pmx_func: i2c2_pmx_func { - pinctrl-single,pins = < - 0x068 0x0 /* I2C2_SCL (IOMG26) */ - 0x06c 0x0 /* I2C2_SDA (IOMG27) */ - >; - }; - i2c2_pmx_idle: i2c2_pmx_idle { - pinctrl-single,pins = < - 0x068 0x1 /* GPIO (IOMG26) */ - 0x06c 0x1 /* GPIO (IOMG27) */ - >; - }; - i2c3_pmx_func: i2c3_pmx_func { - pinctrl-single,pins = < - 0x050 0x2 /* I2C3_SCL (IOMG20) */ - 0x054 0x2 /* I2C3_SDA (IOMG21) */ - >; - }; - i2c3_pmx_idle: i2c3_pmx_idle { - pinctrl-single,pins = < - 0x050 0x1 /* GPIO (IOMG20) */ - 0x054 0x1 /* GPIO (IOMG21) */ - >; - }; - spi0_pmx_func: spi0_pmx_func { - pinctrl-single,pins = < - 0x0d4 0x0 /* SPI0_CLK/SPI0_DI/SPI0_DO (IOMG53) */ - 0x0d8 0x0 /* SPI0_CS0 (IOMG54) */ - 0x0dc 0x0 /* SPI0_CS1 (IOMG55) */ - 0x0e0 0x0 /* SPI0_CS2 (IOMG56) */ - 0x0e4 0x0 /* SPI0_CS3 (IOMG57) */ - >; - }; - spi0_pmx_idle: spi0_pmx_idle { - pinctrl-single,pins = < - 0x0d4 0x1 /* GPIO (IOMG53) */ - 0x0d8 0x1 /* GPIO (IOMG54) */ - 0x0dc 0x1 /* GPIO (IOMG55) */ - 0x0e0 0x1 /* GPIO (IOMG56) */ - 0x0e4 0x1 /* GPIO (IOMG57) */ - >; - }; - spi1_pmx_func: spi1_pmx_func { - pinctrl-single,pins = < - 0x184 0x0 /* SPI1_CLK/SPI1_DI (IOMG98) */ - 0x0e8 0x0 /* SPI1_DO (IOMG58) */ - 0x0ec 0x0 /* SPI1_CS (IOMG95) */ - >; - }; - spi1_pmx_idle: spi1_pmx_idle { - pinctrl-single,pins = < - 0x184 0x1 /* GPIO (IOMG98) */ - 0x0e8 0x1 /* GPIO (IOMG58) */ - 0x0ec 0x1 /* GPIO (IOMG95) */ - >; - }; - kpc_pmx_func: kpc_pmx_func { - pinctrl-single,pins = < - 0x12c 0x0 /* KEY_IN0 (IOMG73) */ - 0x130 0x0 /* KEY_IN1 (IOMG74) */ - 0x134 0x0 /* KEY_IN2 (IOMG75) */ - 0x10c 0x0 /* KEY_OUT0 (IOMG65) */ - 0x110 0x0 /* KEY_OUT1 (IOMG66) */ - 0x114 0x0 /* KEY_OUT2 (IOMG67) */ - >; - }; - kpc_pmx_idle: kpc_pmx_idle { - pinctrl-single,pins = < - 0x12c 0x1 /* GPIO (IOMG73) */ - 0x130 0x1 /* GPIO (IOMG74) */ - 0x134 0x1 /* GPIO (IOMG75) */ - 0x10c 0x1 /* GPIO (IOMG65) */ - 0x110 0x1 /* GPIO (IOMG66) */ - 0x114 0x1 /* GPIO (IOMG67) */ - >; - }; - gpio_key_func: gpio_key_func { - pinctrl-single,pins = < - 0x10c 0x1 /* KEY_OUT0/GPIO (IOMG65) */ - 0x130 0x1 /* KEY_IN1/GPIO (IOMG74) */ - >; - }; - emmc_pmx_func: emmc_pmx_func { - pinctrl-single,pins = < - 0x030 0x2 /* eMMC_CMD/eMMC_CLK (IOMG12) */ - 0x018 0x0 /* NAND_CS3_N (IOMG6) */ - 0x024 0x0 /* NAND_BUSY2_N (IOMG8) */ - 0x028 0x0 /* NAND_BUSY3_N (IOMG9) */ - 0x02c 0x2 /* eMMC_DATA[0:7] (IOMG10) */ - >; - }; - emmc_pmx_idle: emmc_pmx_idle { - pinctrl-single,pins = < - 0x030 0x0 /* GPIO (IOMG12) */ - 0x018 0x1 /* GPIO (IOMG6) */ - 0x024 0x1 /* GPIO (IOMG8) */ - 0x028 0x1 /* GPIO (IOMG9) */ - 0x02c 0x1 /* GPIO (IOMG10) */ - >; - }; - sd_pmx_func: sd_pmx_func { - pinctrl-single,pins = < - 0x0bc 0x0 /* SD_CLK/SD_CMD/SD_DATA0/SD_DATA1/SD_DATA2 (IOMG47) */ - 0x0c0 0x0 /* SD_DATA3 (IOMG48) */ - >; - }; - sd_pmx_idle: sd_pmx_idle { - pinctrl-single,pins = < - 0x0bc 0x1 /* GPIO (IOMG47) */ - 0x0c0 0x1 /* GPIO (IOMG48) */ - >; - }; - nand_pmx_func: nand_pmx_func { - pinctrl-single,pins = < - 0x00c 0x0 /* NAND_ALE/NAND_CLE/.../NAND_DATA[0:7] (IOMG3) */ - 0x010 0x0 /* NAND_CS1_N (IOMG4) */ - 0x014 0x0 /* NAND_CS2_N (IOMG5) */ - 0x018 0x0 /* NAND_CS3_N (IOMG6) */ - 0x01c 0x0 /* NAND_BUSY0_N (IOMG94) */ - 0x020 0x0 /* NAND_BUSY1_N (IOMG7) */ - 0x024 0x0 /* NAND_BUSY2_N (IOMG8) */ - 0x028 0x0 /* NAND_BUSY3_N (IOMG9) */ - 0x02c 0x0 /* NAND_DATA[8:15] (IOMG10) */ - >; - }; - nand_pmx_idle: nand_pmx_idle { - pinctrl-single,pins = < - 0x00c 0x1 /* GPIO (IOMG3) */ - 0x010 0x1 /* GPIO (IOMG4) */ - 0x014 0x1 /* GPIO (IOMG5) */ - 0x018 0x1 /* GPIO (IOMG6) */ - 0x01c 0x1 /* GPIO (IOMG94) */ - 0x020 0x1 /* GPIO (IOMG7) */ - 0x024 0x1 /* GPIO (IOMG8) */ - 0x028 0x1 /* GPIO (IOMG9) */ - 0x02c 0x1 /* GPIO (IOMG10) */ - >; - }; - sdio_pmx_func: sdio_pmx_func { - pinctrl-single,pins = < - 0x0c4 0x0 /* SDIO_CLK/SDIO_CMD/SDIO_DATA[0:3] (IOMG49) */ - >; - }; - sdio_pmx_idle: sdio_pmx_idle { - pinctrl-single,pins = < - 0x0c4 0x1 /* GPIO (IOMG49) */ - >; - }; - audio_out_pmx_func: audio_out_pmx_func { - pinctrl-single,pins = < - 0x0f0 0x1 /* GPIO (IOMG59), audio spk & earphone */ - >; - }; - }; - - pmx1: pinmux@803800 { - pinctrl-names = "default"; - pinctrl-0 = < &board_pu_pins &board_pd_pins &board_pd_ps_pins - &board_np_pins &board_ps_pins &kpc_cfg_func - &audio_out_cfg_func>; - board_pu_pins: board_pu_pins { - pinctrl-single,pins = < - 0x014 0 /* GPIO_158 (IOCFG2) */ - 0x018 0 /* GPIO_159 (IOCFG3) */ - 0x01c 0 /* BOOT_MODE0 (IOCFG4) */ - 0x020 0 /* BOOT_MODE1 (IOCFG5) */ - >; - pinctrl-single,bias-pulldown = <0 2 0 2>; - pinctrl-single,bias-pullup = <1 1 0 1>; - }; - board_pd_pins: board_pd_pins { - pinctrl-single,pins = < - 0x038 0 /* eFUSE_DOUT (IOCFG11) */ - 0x150 0 /* ISP_GPIO8 (IOCFG93) */ - 0x154 0 /* ISP_GPIO9 (IOCFG94) */ - >; - pinctrl-single,bias-pulldown = <2 2 0 2>; - pinctrl-single,bias-pullup = <0 1 0 1>; - }; - board_pd_ps_pins: board_pd_ps_pins { - pinctrl-single,pins = < - 0x2d8 0 /* CLK_OUT0 (IOCFG190) */ - 0x004 0 /* PMU_SPI_DATA (IOCFG192) */ - >; - pinctrl-single,bias-pulldown = <2 2 0 2>; - pinctrl-single,bias-pullup = <0 1 0 1>; - pinctrl-single,drive-strength = <0x30 0xf0>; - }; - board_np_pins: board_np_pins { - pinctrl-single,pins = < - 0x24c 0 /* KEYPAD_OUT7 (IOCFG155) */ - >; - pinctrl-single,bias-pulldown = <0 2 0 2>; - pinctrl-single,bias-pullup = <0 1 0 1>; - }; - board_ps_pins: board_ps_pins { - pinctrl-single,pins = < - 0x000 0 /* PMU_SPI_CLK (IOCFG191) */ - 0x008 0 /* PMU_SPI_CS_N (IOCFG193) */ - >; - pinctrl-single,drive-strength = <0x30 0xf0>; - }; - uart0_cfg_func: uart0_cfg_func { - pinctrl-single,pins = < - 0x208 0 /* UART0_RXD (IOCFG138) */ - 0x20c 0 /* UART0_TXD (IOCFG139) */ - >; - pinctrl-single,bias-pulldown = <0 2 0 2>; - pinctrl-single,bias-pullup = <0 1 0 1>; - }; - uart0_cfg_idle: uart0_cfg_idle { - pinctrl-single,pins = < - 0x208 0 /* UART0_RXD (IOCFG138) */ - 0x20c 0 /* UART0_TXD (IOCFG139) */ - >; - pinctrl-single,bias-pulldown = <2 2 0 2>; - pinctrl-single,bias-pullup = <0 1 0 1>; - }; - uart1_cfg_func: uart1_cfg_func { - pinctrl-single,pins = < - 0x210 0 /* UART1_CTS (IOCFG140) */ - 0x214 0 /* UART1_RTS (IOCFG141) */ - 0x218 0 /* UART1_RXD (IOCFG142) */ - 0x21c 0 /* UART1_TXD (IOCFG143) */ - >; - pinctrl-single,bias-pulldown = <0 2 0 2>; - pinctrl-single,bias-pullup = <0 1 0 1>; - }; - uart1_cfg_idle: uart1_cfg_idle { - pinctrl-single,pins = < - 0x210 0 /* UART1_CTS (IOCFG140) */ - 0x214 0 /* UART1_RTS (IOCFG141) */ - 0x218 0 /* UART1_RXD (IOCFG142) */ - 0x21c 0 /* UART1_TXD (IOCFG143) */ - >; - pinctrl-single,bias-pulldown = <2 2 0 2>; - pinctrl-single,bias-pullup = <0 1 0 1>; - }; - uart2_cfg_func: uart2_cfg_func { - pinctrl-single,pins = < - 0x220 0 /* UART2_CTS (IOCFG144) */ - 0x224 0 /* UART2_RTS (IOCFG145) */ - 0x228 0 /* UART2_RXD (IOCFG146) */ - 0x22c 0 /* UART2_TXD (IOCFG147) */ - >; - pinctrl-single,bias-pulldown = <0 2 0 2>; - pinctrl-single,bias-pullup = <0 1 0 1>; - }; - uart2_cfg_idle: uart2_cfg_idle { - pinctrl-single,pins = < - 0x220 0 /* GPIO (IOCFG144) */ - 0x224 0 /* GPIO (IOCFG145) */ - 0x228 0 /* GPIO (IOCFG146) */ - 0x22c 0 /* GPIO (IOCFG147) */ - >; - pinctrl-single,bias-pulldown = <2 2 0 2>; - pinctrl-single,bias-pullup = <0 1 0 1>; - }; - uart3_cfg_func: uart3_cfg_func { - pinctrl-single,pins = < - 0x294 0 /* UART3_CTS (IOCFG173) */ - 0x298 0 /* UART3_RTS (IOCFG174) */ - 0x29c 0 /* UART3_RXD (IOCFG175) */ - 0x2a0 0 /* UART3_TXD (IOCFG176) */ - >; - pinctrl-single,bias-pulldown = <0 2 0 2>; - pinctrl-single,bias-pullup = <0 1 0 1>; - }; - uart3_cfg_idle: uart3_cfg_idle { - pinctrl-single,pins = < - 0x294 0 /* UART3_CTS (IOCFG173) */ - 0x298 0 /* UART3_RTS (IOCFG174) */ - 0x29c 0 /* UART3_RXD (IOCFG175) */ - 0x2a0 0 /* UART3_TXD (IOCFG176) */ - >; - pinctrl-single,bias-pulldown = <2 2 0 2>; - pinctrl-single,bias-pullup = <0 1 0 1>; - }; - uart4_cfg_func: uart4_cfg_func { - pinctrl-single,pins = < - 0x2a4 0 /* UART4_CTS (IOCFG177) */ - 0x2a8 0 /* UART4_RTS (IOCFG178) */ - 0x2ac 0 /* UART4_RXD (IOCFG179) */ - 0x2b0 0 /* UART4_TXD (IOCFG180) */ - >; - pinctrl-single,bias-pulldown = <0 2 0 2>; - pinctrl-single,bias-pullup = <0 1 0 1>; - }; - i2c0_cfg_func: i2c0_cfg_func { - pinctrl-single,pins = < - 0x17c 0 /* I2C0_SCL (IOCFG103) */ - 0x180 0 /* I2C0_SDA (IOCFG104) */ - >; - pinctrl-single,bias-pulldown = <0 2 0 2>; - pinctrl-single,bias-pullup = <0 1 0 1>; - pinctrl-single,drive-strength = <0x30 0xf0>; - }; - i2c1_cfg_func: i2c1_cfg_func { - pinctrl-single,pins = < - 0x184 0 /* I2C1_SCL (IOCFG105) */ - 0x188 0 /* I2C1_SDA (IOCFG106) */ - >; - pinctrl-single,bias-pulldown = <0 2 0 2>; - pinctrl-single,bias-pullup = <0 1 0 1>; - pinctrl-single,drive-strength = <0x30 0xf0>; - }; - i2c2_cfg_func: i2c2_cfg_func { - pinctrl-single,pins = < - 0x118 0 /* I2C2_SCL (IOCFG79) */ - 0x11c 0 /* I2C2_SDA (IOCFG80) */ - >; - pinctrl-single,bias-pulldown = <0 2 0 2>; - pinctrl-single,bias-pullup = <0 1 0 1>; - pinctrl-single,drive-strength = <0x30 0xf0>; - }; - i2c3_cfg_func: i2c3_cfg_func { - pinctrl-single,pins = < - 0x100 0 /* I2C3_SCL (IOCFG73) */ - 0x104 0 /* I2C3_SDA (IOCFG74) */ - >; - pinctrl-single,bias-pulldown = <0 2 0 2>; - pinctrl-single,bias-pullup = <0 1 0 1>; - pinctrl-single,drive-strength = <0x30 0xf0>; - }; - spi0_cfg_func1: spi0_cfg_func1 { - pinctrl-single,pins = < - 0x1d4 0 /* SPI0_CLK (IOCFG125) */ - 0x1d8 0 /* SPI0_DI (IOCFG126) */ - 0x1dc 0 /* SPI0_DO (IOCFG127) */ - >; - pinctrl-single,bias-pulldown = <2 2 0 2>; - pinctrl-single,bias-pullup = <0 1 0 1>; - pinctrl-single,drive-strength = <0x30 0xf0>; - }; - spi0_cfg_func2: spi0_cfg_func2 { - pinctrl-single,pins = < - 0x1e0 0 /* SPI0_CS0 (IOCFG128) */ - 0x1e4 0 /* SPI0_CS1 (IOCFG129) */ - 0x1e8 0 /* SPI0_CS2 (IOCFG130 */ - 0x1ec 0 /* SPI0_CS3 (IOCFG131) */ - >; - pinctrl-single,bias-pulldown = <0 2 0 2>; - pinctrl-single,bias-pullup = <1 1 0 1>; - pinctrl-single,drive-strength = <0x30 0xf0>; - }; - spi1_cfg_func1: spi1_cfg_func1 { - pinctrl-single,pins = < - 0x1f0 0 /* SPI1_CLK (IOCFG132) */ - 0x1f4 0 /* SPI1_DI (IOCFG133) */ - 0x1f8 0 /* SPI1_DO (IOCFG134) */ - >; - pinctrl-single,bias-pulldown = <2 2 0 2>; - pinctrl-single,bias-pullup = <0 1 0 1>; - pinctrl-single,drive-strength = <0x30 0xf0>; - }; - spi1_cfg_func2: spi1_cfg_func2 { - pinctrl-single,pins = < - 0x1fc 0 /* SPI1_CS (IOCFG135) */ - >; - pinctrl-single,bias-pulldown = <0 2 0 2>; - pinctrl-single,bias-pullup = <1 1 0 1>; - pinctrl-single,drive-strength = <0x30 0xf0>; - }; - kpc_cfg_func: kpc_cfg_func { - pinctrl-single,pins = < - 0x250 0 /* KEY_IN0 (IOCFG156) */ - 0x254 0 /* KEY_IN1 (IOCFG157) */ - 0x258 0 /* KEY_IN2 (IOCFG158) */ - 0x230 0 /* KEY_OUT0 (IOCFG148) */ - 0x234 0 /* KEY_OUT1 (IOCFG149) */ - 0x238 0 /* KEY_OUT2 (IOCFG150) */ - >; - pinctrl-single,bias-pulldown = <2 2 0 2>; - pinctrl-single,bias-pullup = <0 1 0 1>; - }; - emmc_cfg_func: emmc_cfg_func { - pinctrl-single,pins = < - 0x0ac 0 /* eMMC_CMD (IOCFG40) */ - 0x0b0 0 /* eMMC_CLK (IOCFG41) */ - 0x058 0 /* NAND_CS3_N (IOCFG19) */ - 0x064 0 /* NAND_BUSY2_N (IOCFG22) */ - 0x068 0 /* NAND_BUSY3_N (IOCFG23) */ - 0x08c 0 /* NAND_DATA8 (IOCFG32) */ - 0x090 0 /* NAND_DATA9 (IOCFG33) */ - 0x094 0 /* NAND_DATA10 (IOCFG34) */ - 0x098 0 /* NAND_DATA11 (IOCFG35) */ - 0x09c 0 /* NAND_DATA12 (IOCFG36) */ - 0x0a0 0 /* NAND_DATA13 (IOCFG37) */ - 0x0a4 0 /* NAND_DATA14 (IOCFG38) */ - 0x0a8 0 /* NAND_DATA15 (IOCFG39) */ - >; - pinctrl-single,bias-pulldown = <0 2 0 2>; - pinctrl-single,bias-pullup = <1 1 0 1>; - pinctrl-single,drive-strength = <0x30 0xf0>; - }; - sd_cfg_func1: sd_cfg_func1 { - pinctrl-single,pins = < - 0x18c 0 /* SD_CLK (IOCFG107) */ - 0x190 0 /* SD_CMD (IOCFG108) */ - >; - pinctrl-single,bias-pulldown = <2 2 0 2>; - pinctrl-single,bias-pullup = <0 1 0 1>; - pinctrl-single,drive-strength = <0x30 0xf0>; - }; - sd_cfg_func2: sd_cfg_func2 { - pinctrl-single,pins = < - 0x194 0 /* SD_DATA0 (IOCFG109) */ - 0x198 0 /* SD_DATA1 (IOCFG110) */ - 0x19c 0 /* SD_DATA2 (IOCFG111) */ - 0x1a0 0 /* SD_DATA3 (IOCFG112) */ - >; - pinctrl-single,bias-pulldown = <2 2 0 2>; - pinctrl-single,bias-pullup = <0 1 0 1>; - pinctrl-single,drive-strength = <0x70 0xf0>; - }; - nand_cfg_func1: nand_cfg_func1 { - pinctrl-single,pins = < - 0x03c 0 /* NAND_ALE (IOCFG12) */ - 0x040 0 /* NAND_CLE (IOCFG13) */ - 0x06c 0 /* NAND_DATA0 (IOCFG24) */ - 0x070 0 /* NAND_DATA1 (IOCFG25) */ - 0x074 0 /* NAND_DATA2 (IOCFG26) */ - 0x078 0 /* NAND_DATA3 (IOCFG27) */ - 0x07c 0 /* NAND_DATA4 (IOCFG28) */ - 0x080 0 /* NAND_DATA5 (IOCFG29) */ - 0x084 0 /* NAND_DATA6 (IOCFG30) */ - 0x088 0 /* NAND_DATA7 (IOCFG31) */ - 0x08c 0 /* NAND_DATA8 (IOCFG32) */ - 0x090 0 /* NAND_DATA9 (IOCFG33) */ - 0x094 0 /* NAND_DATA10 (IOCFG34) */ - 0x098 0 /* NAND_DATA11 (IOCFG35) */ - 0x09c 0 /* NAND_DATA12 (IOCFG36) */ - 0x0a0 0 /* NAND_DATA13 (IOCFG37) */ - 0x0a4 0 /* NAND_DATA14 (IOCFG38) */ - 0x0a8 0 /* NAND_DATA15 (IOCFG39) */ - >; - pinctrl-single,bias-pulldown = <2 2 0 2>; - pinctrl-single,bias-pullup = <0 1 0 1>; - pinctrl-single,drive-strength = <0x30 0xf0>; - }; - nand_cfg_func2: nand_cfg_func2 { - pinctrl-single,pins = < - 0x044 0 /* NAND_RE_N (IOCFG14) */ - 0x048 0 /* NAND_WE_N (IOCFG15) */ - 0x04c 0 /* NAND_CS0_N (IOCFG16) */ - 0x050 0 /* NAND_CS1_N (IOCFG17) */ - 0x054 0 /* NAND_CS2_N (IOCFG18) */ - 0x058 0 /* NAND_CS3_N (IOCFG19) */ - 0x05c 0 /* NAND_BUSY0_N (IOCFG20) */ - 0x060 0 /* NAND_BUSY1_N (IOCFG21) */ - 0x064 0 /* NAND_BUSY2_N (IOCFG22) */ - 0x068 0 /* NAND_BUSY3_N (IOCFG23) */ - >; - pinctrl-single,bias-pulldown = <0 2 0 2>; - pinctrl-single,bias-pullup = <1 1 0 1>; - pinctrl-single,drive-strength = <0x30 0xf0>; - }; - sdio_cfg_func: sdio_cfg_func { - pinctrl-single,pins = < - 0x1a4 0 /* SDIO0_CLK (IOCG113) */ - 0x1a8 0 /* SDIO0_CMD (IOCG114) */ - 0x1ac 0 /* SDIO0_DATA0 (IOCG115) */ - 0x1b0 0 /* SDIO0_DATA1 (IOCG116) */ - 0x1b4 0 /* SDIO0_DATA2 (IOCG117) */ - 0x1b8 0 /* SDIO0_DATA3 (IOCG118) */ - >; - pinctrl-single,bias-pulldown = <2 2 0 2>; - pinctrl-single,bias-pullup = <0 1 0 1>; - pinctrl-single,drive-strength = <0x30 0xf0>; - }; - audio_out_cfg_func: audio_out_cfg_func { - pinctrl-single,pins = < - 0x200 0 /* GPIO (IOCFG136) */ - 0x204 0 /* GPIO (IOCFG137) */ - >; - pinctrl-single,bias-pulldown = <2 2 0 2>; - pinctrl-single,bias-pullup = <0 1 0 1>; - }; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - call { - label = "call"; - gpios = <&gpio17 2 0>; - linux,code = <169>; /* KEY_PHONE */ - }; - }; -}; -- cgit v1.1 From 2aec37c659500b1ab39355adc17029d0acca7bcb Mon Sep 17 00:00:00 2001 From: Rohit Vaswani Date: Fri, 20 Dec 2013 11:09:15 -0800 Subject: ARM: msm: Add support for MSM8974 SoC Add support for the Snapdragon 800 MSM8974 SoC, used on the Dragonboard and others. Board support added in separate patch. Signed-off-by: Rohit Vaswani Acked-by: Kumar Gala Signed-off-by: David Brown [olof: split off SoC support in separate patch] Signed-off-by: Olof Johansson --- arch/arm/boot/dts/qcom-msm8974.dtsi | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-msm8974.dtsi (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi new file mode 100644 index 0000000..2ebb4f0 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -0,0 +1,33 @@ +/dts-v1/; + +#include "skeleton.dtsi" + +/ { + model = "Qualcomm MSM8974"; + compatible = "qcom,msm8974"; + interrupt-parent = <&intc>; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + intc: interrupt-controller@f9000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0xf9000000 0x1000>, + <0xf9002000 0x1000>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 2 0xf08>, + <1 3 0xf08>, + <1 4 0xf08>, + <1 1 0xf08>; + clock-frequency = <19200000>; + }; + }; +}; -- cgit v1.1