From fdf26183781bf4c2e80b6a84146d95b875aa1b2d Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 23 Jul 2014 15:03:03 +0200 Subject: ARM: zynq: DT: Add CAN node Add node describing Zynq's CAN controller. Signed-off-by: Michal Simek Reviewed-by: Soren Brinkmann --- arch/arm/boot/dts/zynq-7000.dtsi | 26 +++++++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot/dts/zynq-7000.dtsi') diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index ef11dab..6cc83d4 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -71,7 +71,31 @@ interrupts = <0 7 4>; interrupt-parent = <&intc>; clocks = <&clkc 12>; - }; + }; + + can0: can@e0008000 { + compatible = "xlnx,zynq-can-1.0"; + status = "disabled"; + clocks = <&clkc 19>, <&clkc 36>; + clock-names = "can_clk", "pclk"; + reg = <0xe0008000 0x1000>; + interrupts = <0 28 4>; + interrupt-parent = <&intc>; + tx-fifo-depth = <0x40>; + rx-fifo-depth = <0x40>; + }; + + can1: can@e0009000 { + compatible = "xlnx,zynq-can-1.0"; + status = "disabled"; + clocks = <&clkc 20>, <&clkc 37>; + clock-names = "can_clk", "pclk"; + reg = <0xe0009000 0x1000>; + interrupts = <0 51 4>; + interrupt-parent = <&intc>; + tx-fifo-depth = <0x40>; + rx-fifo-depth = <0x40>; + }; gpio0: gpio@e000a000 { compatible = "xlnx,zynq-gpio-1.0"; -- cgit v1.1