From 9dd4f28f361df401f738927963af015134f23a1c Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Thu, 16 Jul 2015 18:12:57 -0400 Subject: ARM: keystone: dts: fix dt bindings for PCIe Currently PCIe DT bindings are broken. PCIe driver can't function without having a SerDes driver that provide the phy configuration. On K2E EVM, this causes problem since the EVM has Marvell SATA controller present and with default values in the SerDes register, it seems to pass the PCIe link check, but causes issues since the configuration is not correct. The manifestation is that when EVM is booted with NFS rootfs, the boot hangs. We shouldn't enable PCIe on this EVM since to work, SerDes driver has to be present as well. So by default, the PCIe DT binding should be disabled in SoC specific DTS. It can be enabled in the board specific DTS when the SerDes device driver is also present. So fix the status of PCIe DT bindings in the SoC specific DTS to "disabled". To enable PCIe, the status should be set to "ok" in the EVM DTS file when SerDes driver support becomes available in the upstream tree. Signed-off-by: Murali Karicheri Signed-off-by: Santosh Shilimkar --- arch/arm/boot/dts/k2e.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts/k2e.dtsi') diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi index 5fc14683..efb8703 100644 --- a/arch/arm/boot/dts/k2e.dtsi +++ b/arch/arm/boot/dts/k2e.dtsi @@ -96,6 +96,7 @@ ranges = <0x81000000 0 0 0x23260000 0x4000 0x4000 0x82000000 0 0x60000000 0x60000000 0 0x10000000>; + status = "disabled"; device_type = "pci"; num-lanes = <2>; -- cgit v1.1