From be4ccfcec3e958ef1eae59430e9962a514f34681 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 31 Dec 2012 11:32:48 +0800 Subject: ARM: dts: imx: use nodes label in board dts Following omap3-evm.dts way, it changes all imx dts files to use label in board dts to refer to nodes defined by soc dtsi. Thus, the board dts files become easier to read and edit with the least indentation levels. Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx51-babbage.dts | 456 ++++++++++++++++++------------------ 1 file changed, 224 insertions(+), 232 deletions(-) (limited to 'arch/arm/boot/dts/imx51-babbage.dts') diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 567e7ee..fb33aff 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -21,239 +21,20 @@ reg = <0x90000000 0x20000000>; }; - soc { - display@di0 { - compatible = "fsl,imx-parallel-display"; - crtcs = <&ipu 0>; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu_disp1_1>; - }; - - display@di1 { - compatible = "fsl,imx-parallel-display"; - crtcs = <&ipu 1>; - interface-pix-fmt = "rgb565"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu_disp2_1>; - }; - - aips@70000000 { /* aips-1 */ - spba@70000000 { - esdhc@70004000 { /* ESDHC1 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc1_1>; - fsl,cd-controller; - fsl,wp-controller; - status = "okay"; - }; - - esdhc@70008000 { /* ESDHC2 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc2_1>; - cd-gpios = <&gpio1 6 0>; - wp-gpios = <&gpio1 5 0>; - status = "okay"; - }; - - uart3: serial@7000c000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3_1>; - fsl,uart-has-rtscts; - status = "okay"; - }; - - ecspi@70010000 { /* ECSPI1 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1_1>; - fsl,spi-num-chipselects = <2>; - cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>; - status = "okay"; - - pmic: mc13892@0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mc13892"; - spi-max-frequency = <6000000>; - reg = <0>; - interrupt-parent = <&gpio1>; - interrupts = <8 0x4>; - - regulators { - sw1_reg: sw1 { - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1375000>; - regulator-boot-on; - regulator-always-on; - }; - - sw2_reg: sw2 { - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1850000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3_reg: sw3 { - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1850000>; - regulator-boot-on; - regulator-always-on; - }; - - sw4_reg: sw4 { - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1850000>; - regulator-boot-on; - regulator-always-on; - }; - - vpll_reg: vpll { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - vdig_reg: vdig { - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <1650000>; - regulator-boot-on; - }; - - vsd_reg: vsd { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3150000>; - }; - - vusb2_reg: vusb2 { - regulator-min-microvolt = <2400000>; - regulator-max-microvolt = <2775000>; - regulator-boot-on; - regulator-always-on; - }; - - vvideo_reg: vvideo { - regulator-min-microvolt = <2775000>; - regulator-max-microvolt = <2775000>; - }; - - vaudio_reg: vaudio { - regulator-min-microvolt = <2300000>; - regulator-max-microvolt = <3000000>; - }; - - vcam_reg: vcam { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <3000000>; - }; - - vgen1_reg: vgen1 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - vgen2_reg: vgen2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3150000>; - regulator-always-on; - }; - - vgen3_reg: vgen3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2900000>; - regulator-always-on; - }; - }; - }; - - flash: at45db321d@1 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash"; - spi-max-frequency = <25000000>; - reg = <1>; - - partition@0 { - label = "U-Boot"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "Kernel"; - reg = <0x40000 0x3c0000>; - }; - }; - }; - - ssi2: ssi@70014000 { - fsl,mode = "i2s-slave"; - status = "okay"; - }; - }; - - iomuxc@73fa8000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - 694 0x20d5 /* MX51_PAD_GPIO1_0__SD1_CD */ - 697 0x20d5 /* MX51_PAD_GPIO1_1__SD1_WP */ - 737 0x100 /* MX51_PAD_GPIO1_5__GPIO1_5 */ - 740 0x100 /* MX51_PAD_GPIO1_6__GPIO1_6 */ - 121 0x5 /* MX51_PAD_EIM_A27__GPIO2_21 */ - 402 0x85 /* MX51_PAD_CSPI1_SS0__GPIO4_24 */ - 405 0x85 /* MX51_PAD_CSPI1_SS1__GPIO4_25 */ - >; - }; - }; - }; - - uart1: serial@73fbc000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_1>; - fsl,uart-has-rtscts; - status = "okay"; - }; - - uart2: serial@73fc0000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2_1>; - status = "okay"; - }; - }; - - aips@80000000 { /* aips-2 */ - i2c@83fc4000 { /* I2C2 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2_1>; - status = "okay"; - - sgtl5000: codec@0a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - clock-frequency = <26000000>; - VDDA-supply = <&vdig_reg>; - VDDIO-supply = <&vvideo_reg>; - }; - }; - - audmux@83fd0000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux_1>; - status = "okay"; - }; + display@di0 { + compatible = "fsl,imx-parallel-display"; + crtcs = <&ipu 0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp1_1>; + }; - ethernet@83fec000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec_1>; - phy-mode = "mii"; - status = "okay"; - }; - }; + display@di1 { + compatible = "fsl,imx-parallel-display"; + crtcs = <&ipu 1>; + interface-pix-fmt = "rgb565"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp2_1>; }; gpio-keys { @@ -281,3 +62,214 @@ mux-ext-port = <3>; }; }; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_1>; + fsl,cd-controller; + fsl,wp-controller; + status = "okay"; +}; + +&esdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc2_1>; + cd-gpios = <&gpio1 6 0>; + wp-gpios = <&gpio1 5 0>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_1>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1>; + fsl,spi-num-chipselects = <2>; + cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>; + status = "okay"; + + pmic: mc13892@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mc13892"; + spi-max-frequency = <6000000>; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <8 0x4>; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1375000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + vpll_reg: vpll { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vdig_reg: vdig { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + }; + + vsd_reg: vsd { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3150000>; + }; + + vusb2_reg: vusb2 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <2775000>; + regulator-boot-on; + regulator-always-on; + }; + + vvideo_reg: vvideo { + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + }; + + vaudio_reg: vaudio { + regulator-min-microvolt = <2300000>; + regulator-max-microvolt = <3000000>; + }; + + vcam_reg: vcam { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3000000>; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + }; + }; + }; + + flash: at45db321d@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <25000000>; + reg = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "Kernel"; + reg = <0x40000 0x3c0000>; + }; + }; +}; + +&ssi2 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 694 0x20d5 /* MX51_PAD_GPIO1_0__SD1_CD */ + 697 0x20d5 /* MX51_PAD_GPIO1_1__SD1_WP */ + 737 0x100 /* MX51_PAD_GPIO1_5__GPIO1_5 */ + 740 0x100 /* MX51_PAD_GPIO1_6__GPIO1_6 */ + 121 0x5 /* MX51_PAD_EIM_A27__GPIO2_21 */ + 402 0x85 /* MX51_PAD_CSPI1_SS0__GPIO4_24 */ + 405 0x85 /* MX51_PAD_CSPI1_SS1__GPIO4_25 */ + >; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_1>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_1>; + status = "okay"; + + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clock-frequency = <26000000>; + VDDA-supply = <&vdig_reg>; + VDDIO-supply = <&vvideo_reg>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_1>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; + phy-mode = "mii"; + status = "okay"; +}; -- cgit v1.1