From f884ab15afdc5514e88105c92a4e2e1e6539869a Mon Sep 17 00:00:00 2001 From: Anatol Pomozov Date: Wed, 8 May 2013 16:56:16 -0700 Subject: doc: fix misspellings with 'codespell' tool Signed-off-by: Anatol Pomozov Signed-off-by: Jiri Kosina --- Documentation/DocBook/drm.tmpl | 6 +++--- Documentation/DocBook/media/dvb/frontend.xml | 2 +- Documentation/DocBook/media/v4l/controls.xml | 2 +- Documentation/DocBook/writing_usb_driver.tmpl | 2 +- Documentation/bcache.txt | 10 +++++----- Documentation/block/queue-sysfs.txt | 2 +- Documentation/cgroups/memory.txt | 2 +- Documentation/device-mapper/cache.txt | 2 +- .../devicetree/bindings/arm/samsung/interrupt-combiner.txt | 6 +++--- Documentation/devicetree/bindings/arm/spear/shirq.txt | 2 +- Documentation/devicetree/bindings/clock/silabs,si5351.txt | 2 +- Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt | 2 +- Documentation/devicetree/bindings/powerpc/4xx/emac.txt | 2 +- Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.txt | 2 +- .../devicetree/bindings/timer/samsung,exynos4210-mct.txt | 2 +- Documentation/devicetree/bindings/usb/am33xx-usb.txt | 2 +- Documentation/devicetree/bindings/usb/omap-usb.txt | 2 +- Documentation/dynamic-debug-howto.txt | 2 +- Documentation/fb/cirrusfb.txt | 2 +- Documentation/filesystems/jfs.txt | 2 +- Documentation/filesystems/qnx6.txt | 2 +- Documentation/filesystems/vfat.txt | 2 +- Documentation/laptops/dslm.c | 2 +- Documentation/media-framework.txt | 2 +- Documentation/metag/kernel-ABI.txt | 2 +- Documentation/misc-devices/mei/mei.txt | 2 +- Documentation/networking/ip-sysctl.txt | 2 +- Documentation/networking/netlink_mmap.txt | 12 ++++++------ Documentation/pinctrl.txt | 2 +- Documentation/thermal/exynos_thermal_emulation | 2 +- Documentation/virtual/kvm/api.txt | 6 +++--- Documentation/vm/pagemap.txt | 2 +- Documentation/w1/slaves/w1_ds28e04 | 2 +- 33 files changed, 48 insertions(+), 48 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index f9df3b8..6dd8d10 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -434,7 +434,7 @@ char *date; The DRM core includes two memory managers, namely Translation Table Maps (TTM) and Graphics Execution Manager (GEM). TTM was the first DRM memory manager to be developed and tried to be a one-size-fits-them all - solution. It provides a single userspace API to accomodate the need of + solution. It provides a single userspace API to accommodate the need of all hardware, supporting both Unified Memory Architecture (UMA) devices and devices with dedicated video RAM (i.e. most discrete video cards). This resulted in a large, complex piece of code that turned out to be @@ -701,7 +701,7 @@ char *date; Similar to global names, GEM file descriptors are also used to share GEM objects across processes. They offer additional security: as file - descriptors must be explictly sent over UNIX domain sockets to be shared + descriptors must be explicitly sent over UNIX domain sockets to be shared between applications, they can't be guessed like the globally unique GEM names. @@ -1154,7 +1154,7 @@ int max_width, max_height; The page_flip operation schedules a page flip. - Once any pending rendering targetting the new frame buffer has + Once any pending rendering targeting the new frame buffer has completed, the CRTC will be reprogrammed to display that frame buffer after the next vertical refresh. The operation must return immediately without waiting for rendering or page flip to complete and must block diff --git a/Documentation/DocBook/media/dvb/frontend.xml b/Documentation/DocBook/media/dvb/frontend.xml index df39ba3..0d6e81b 100644 --- a/Documentation/DocBook/media/dvb/frontend.xml +++ b/Documentation/DocBook/media/dvb/frontend.xml @@ -233,7 +233,7 @@ typedef enum fe_status { The frontend FEC inner coding (Viterbi, LDPC or other inner code) is stable FE_HAS_SYNC -Syncronization bytes was found +Synchronization bytes was found FE_HAS_LOCK The DVB were locked and everything is working diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml index 8d7a779..c2fc9ec 100644 --- a/Documentation/DocBook/media/v4l/controls.xml +++ b/Documentation/DocBook/media/v4l/controls.xml @@ -3147,7 +3147,7 @@ giving priority to the center of the metered area. A multi-zone metering. The light intensity is measured in several points of the frame and the the results are combined. The algorithm of the zones selection and their significance in calculating the -final value is device dependant. +final value is device dependent. diff --git a/Documentation/DocBook/writing_usb_driver.tmpl b/Documentation/DocBook/writing_usb_driver.tmpl index bd97a13..3210dcf 100644 --- a/Documentation/DocBook/writing_usb_driver.tmpl +++ b/Documentation/DocBook/writing_usb_driver.tmpl @@ -83,7 +83,7 @@ Because each different protocol causes a new driver to be created, I have - written a generic USB driver skeleton, modeled after the pci-skeleton.c + written a generic USB driver skeleton, modelled after the pci-skeleton.c file in the kernel source tree upon which many PCI network drivers have been based. This USB skeleton can be found at drivers/usb/usb-skeleton.c in the kernel source tree. In this article I will walk through the basics diff --git a/Documentation/bcache.txt b/Documentation/bcache.txt index 77db880..2cdd4cf 100644 --- a/Documentation/bcache.txt +++ b/Documentation/bcache.txt @@ -181,7 +181,7 @@ want for getting the best possible numbers when benchmarking. In practice this isn't an issue because as soon as a write comes along it'll cause the btree node to be split, and you need almost no write traffic for - this to not show up enough to be noticable (especially since bcache's btree + this to not show up enough to be noticeable (especially since bcache's btree nodes are huge and index large regions of the device). But when you're benchmarking, if you're trying to warm the cache by reading a bunch of data and there's no other traffic - that can be a problem. @@ -222,7 +222,7 @@ running it's in passthrough mode or caching). sequential_cutoff - A sequential IO will bypass the cache once it passes this threshhold; the + A sequential IO will bypass the cache once it passes this threshold; the most recent 128 IOs are tracked so sequential IO can be detected even when it isn't all done at once. @@ -296,7 +296,7 @@ cache_miss_collisions since the synchronization for cache misses was rewritten) cache_readaheads - Count of times readahead occured. + Count of times readahead occurred. SYSFS - CACHE SET: @@ -359,7 +359,7 @@ unregister SYSFS - CACHE SET INTERNAL: This directory also exposes timings for a number of internal operations, with -separate files for average duration, average frequency, last occurence and max +separate files for average duration, average frequency, last occurrence and max duration: garbage collection, btree read, btree node sorts and btree splits. active_journal_entries @@ -414,7 +414,7 @@ freelist_percent space. io_errors - Number of errors that have occured, decayed by io_error_halflife. + Number of errors that have occurred, decayed by io_error_halflife. metadata_written Sum of all non data writes (btree writes and all other metadata). diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.txt index e54ac1d..7d2d046 100644 --- a/Documentation/block/queue-sysfs.txt +++ b/Documentation/block/queue-sysfs.txt @@ -93,7 +93,7 @@ To avoid priority inversion through request starvation, a request queue maintains a separate request pool per each cgroup when CONFIG_BLK_CGROUP is enabled, and this parameter applies to each such per-block-cgroup request pool. IOW, if there are N block cgroups, -each request queue may have upto N request pools, each independently +each request queue may have up to N request pools, each independently regulated by nr_requests. optimal_io_size (RO) diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt index ddf4f93..3aaf787 100644 --- a/Documentation/cgroups/memory.txt +++ b/Documentation/cgroups/memory.txt @@ -304,7 +304,7 @@ kernel memory, we prevent new processes from being created when the kernel memory usage is too high. * slab pages: pages allocated by the SLAB or SLUB allocator are tracked. A copy -of each kmem_cache is created everytime the cache is touched by the first time +of each kmem_cache is created every time the cache is touched by the first time from inside the memcg. The creation is done lazily, so some objects can still be skipped while the cache is being created. All objects in a slab page should belong to the same memcg. This only fails to hold when a task is migrated to a diff --git a/Documentation/device-mapper/cache.txt b/Documentation/device-mapper/cache.txt index f50470a..e8cdf72 100644 --- a/Documentation/device-mapper/cache.txt +++ b/Documentation/device-mapper/cache.txt @@ -87,7 +87,7 @@ Migration throttling Migrating data between the origin and cache device uses bandwidth. The user can set a throttle to prevent more than a certain amount of -migration occuring at any one time. Currently we're not taking any +migration occurring at any one time. Currently we're not taking any account of normal io traffic going to the devices. More work needs doing here to avoid migrating during those peak io moments. diff --git a/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt b/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt index f2f2171..9e5f734 100644 --- a/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt +++ b/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt @@ -5,7 +5,7 @@ can combine interrupt sources as a group and provide a single interrupt request for the group. The interrupt request from each group are connected to a parent interrupt controller, such as GIC in case of Exynos4210. -The interrupt combiner controller consists of multiple combiners. Upto eight +The interrupt combiner controller consists of multiple combiners. Up to eight interrupt sources can be connected to a combiner. The combiner outputs one combined interrupt for its eight interrupt sources. The combined interrupt is usually connected to a parent interrupt controller. @@ -14,8 +14,8 @@ A single node in the device tree is used to describe the interrupt combiner controller module (which includes multiple combiners). A combiner in the interrupt controller module shares config/control registers with other combiners. For example, a 32-bit interrupt enable/disable config register -can accommodate upto 4 interrupt combiners (with each combiner supporting -upto 8 interrupt sources). +can accommodate up to 4 interrupt combiners (with each combiner supporting +up to 8 interrupt sources). Required properties: - compatible: should be "samsung,exynos4210-combiner". diff --git a/Documentation/devicetree/bindings/arm/spear/shirq.txt b/Documentation/devicetree/bindings/arm/spear/shirq.txt index 13fbb88..715a013 100644 --- a/Documentation/devicetree/bindings/arm/spear/shirq.txt +++ b/Documentation/devicetree/bindings/arm/spear/shirq.txt @@ -14,7 +14,7 @@ A single node in the device tree is used to describe the shared interrupt multiplexor (one node for all groups). A group in the interrupt controller shares config/control registers with other groups. For example, a 32-bit interrupt enable/disable config register can -accommodate upto 4 interrupt groups. +accommodate up to 4 interrupt groups. Required properties: - compatible: should be, either of diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt index cc37465..04feb13 100644 --- a/Documentation/devicetree/bindings/clock/silabs,si5351.txt +++ b/Documentation/devicetree/bindings/clock/silabs,si5351.txt @@ -4,7 +4,7 @@ Reference [1] Si5351A/B/C Data Sheet http://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf -The Si5351a/b/c are programmable i2c clock generators with upto 8 output +The Si5351a/b/c are programmable i2c clock generators with up to 8 output clocks. Si5351a also has a reduced pin-count package (MSOP10) where only 3 output clocks are accessible. The internal structure of the clock generators can be found in [1]. diff --git a/Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt index 726fd21..1180d78 100644 --- a/Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt @@ -51,7 +51,7 @@ Optional properties: * card-detect-delay: Delay in milli-seconds before detecting card after card insert event. The default value is 0. -* supports-highspeed: Enables support for high speed cards (upto 50MHz) +* supports-highspeed: Enables support for high speed cards (up to 50MHz) * broken-cd: as documented in mmc core bindings. diff --git a/Documentation/devicetree/bindings/powerpc/4xx/emac.txt b/Documentation/devicetree/bindings/powerpc/4xx/emac.txt index 2161334a..712baf6 100644 --- a/Documentation/devicetree/bindings/powerpc/4xx/emac.txt +++ b/Documentation/devicetree/bindings/powerpc/4xx/emac.txt @@ -1,7 +1,7 @@ 4xx/Axon EMAC ethernet nodes The EMAC ethernet controller in IBM and AMCC 4xx chips, and also - the Axon bridge. To operate this needs to interact with a ths + the Axon bridge. To operate this needs to interact with a this special McMAL DMA controller, and sometimes an RGMII or ZMII interface. In addition to the nodes and properties described below, the node for the OPB bus on which the EMAC sits must have a diff --git a/Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.txt b/Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.txt index 8bf89c6..f11f295 100644 --- a/Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.txt +++ b/Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.txt @@ -2,7 +2,7 @@ Broadcom BCM2835 SPI0 controller The BCM2835 contains two forms of SPI master controller, one known simply as SPI0, and the other known as the "Universal SPI Master"; part of the -auxilliary block. This binding applies to the SPI0 controller. +auxiliary block. This binding applies to the SPI0 controller. Required properties: - compatible: Should be "brcm,bcm2835-spi". diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt index cb47bfb..b5a86d2 100644 --- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt +++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt @@ -44,7 +44,7 @@ Example 1: In this example, the system uses only the first global timer }; Example 2: In this example, the MCT global and local timer interrupts are - connected to two seperate interrupt controllers. Hence, an + connected to two separate interrupt controllers. Hence, an interrupt-map is created to map the interrupts to the respective interrupt controllers. diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt index ea840f7..dc9dc8c 100644 --- a/Documentation/devicetree/bindings/usb/am33xx-usb.txt +++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt @@ -12,7 +12,7 @@ AM33XX MUSB GLUE represents PERIPHERAL. - port1-mode : Should be "1" to represent HOST. "3" signifies OTG and "2" represents PERIPHERAL. - - power : Should be "250". This signifies the controller can supply upto + - power : Should be "250". This signifies the controller can supply up to 500mA when operating in host mode. Example: diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index d4769f3..57e71f6 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -16,7 +16,7 @@ OMAP MUSB GLUE specifying ULPI and UTMI respectively. - mode : Should be "3" to represent OTG. "1" signifies HOST and "2" represents PERIPHERAL. - - power : Should be "50". This signifies the controller can supply upto + - power : Should be "50". This signifies the controller can supply up to 100mA when operating in host mode. - usb-phy : the phandle for the PHY device diff --git a/Documentation/dynamic-debug-howto.txt b/Documentation/dynamic-debug-howto.txt index 72322c6..1bbdcfc 100644 --- a/Documentation/dynamic-debug-howto.txt +++ b/Documentation/dynamic-debug-howto.txt @@ -279,7 +279,7 @@ The dyndbg option is a "fake" module parameter, which means: - modules do not need to define it explicitly - every module gets it tacitly, whether they use pr_debug or not -- it doesnt appear in /sys/module/$module/parameters/ +- it doesn't appear in /sys/module/$module/parameters/ To see it, grep the control file, or inspect /proc/cmdline. For CONFIG_DYNAMIC_DEBUG kernels, any settings given at boot-time (or diff --git a/Documentation/fb/cirrusfb.txt b/Documentation/fb/cirrusfb.txt index f943684..f75950d 100644 --- a/Documentation/fb/cirrusfb.txt +++ b/Documentation/fb/cirrusfb.txt @@ -55,7 +55,7 @@ Version 1.9.4.4 * Overhaul color register routines. * Associated with the above, console colors are now obtained from a LUT called 'palette' instead of from the VGA registers. This code was - modeled after that in atyfb and matroxfb. + modelled after that in atyfb and matroxfb. * Code cleanup, add comments. * Overhaul SR07 handling. * Bug fixes. diff --git a/Documentation/filesystems/jfs.txt b/Documentation/filesystems/jfs.txt index f743335..41fd757 100644 --- a/Documentation/filesystems/jfs.txt +++ b/Documentation/filesystems/jfs.txt @@ -42,7 +42,7 @@ nodiscard(*) block device when blocks are freed. This is useful for SSD devices and sparse/thinly-provisioned LUNs. The FITRIM ioctl command is also available together with the nodiscard option. The value of minlen specifies the minimum blockcount, when - a TRIM command to the block device is considered usefull. + a TRIM command to the block device is considered useful. When no value is given to the discard option, it defaults to 64 blocks, which means 256KiB in JFS. The minlen value of discard overrides the minlen value given diff --git a/Documentation/filesystems/qnx6.txt b/Documentation/filesystems/qnx6.txt index e59f2f0..99e9018 100644 --- a/Documentation/filesystems/qnx6.txt +++ b/Documentation/filesystems/qnx6.txt @@ -148,7 +148,7 @@ smaller than addressing space in the bitmap. Bitmap system area ------------------ -The bitmap itself is devided into three parts. +The bitmap itself is divided into three parts. First the system area, that is split into two halfs. Then userspace. diff --git a/Documentation/filesystems/vfat.txt b/Documentation/filesystems/vfat.txt index 4a93e98..aa1f459 100644 --- a/Documentation/filesystems/vfat.txt +++ b/Documentation/filesystems/vfat.txt @@ -307,7 +307,7 @@ the following: - + diff --git a/Documentation/laptops/dslm.c b/Documentation/laptops/dslm.c index 72ff290..d5dd2d4 100644 --- a/Documentation/laptops/dslm.c +++ b/Documentation/laptops/dslm.c @@ -2,7 +2,7 @@ * dslm.c * Simple Disk Sleep Monitor * by Bartek Kania - * Licenced under the GPL + * Licensed under the GPL */ #include #include diff --git a/Documentation/media-framework.txt b/Documentation/media-framework.txt index 77bd0a4..eeced24 100644 --- a/Documentation/media-framework.txt +++ b/Documentation/media-framework.txt @@ -18,7 +18,7 @@ Abstract media device model Discovering a device internal topology, and configuring it at runtime, is one of the goals of the media framework. To achieve this, hardware devices are -modeled as an oriented graph of building blocks called entities connected +modelled as an oriented graph of building blocks called entities connected through pads. An entity is a basic media hardware building block. It can correspond to diff --git a/Documentation/metag/kernel-ABI.txt b/Documentation/metag/kernel-ABI.txt index 7b8dee8..6282166 100644 --- a/Documentation/metag/kernel-ABI.txt +++ b/Documentation/metag/kernel-ABI.txt @@ -189,7 +189,7 @@ call: 64-bit arguments are placed in matching pairs of registers (i.e. the same register number in both D0 and D1 units), with the least significant half in D0 -and the most significant half in D1, leaving a gap where necessary. Futher +and the most significant half in D1, leaving a gap where necessary. Further arguments are stored on the stack in reverse order (earlier arguments at higher addresses): diff --git a/Documentation/misc-devices/mei/mei.txt b/Documentation/misc-devices/mei/mei.txt index 6ec7029..15bba1a 100644 --- a/Documentation/misc-devices/mei/mei.txt +++ b/Documentation/misc-devices/mei/mei.txt @@ -120,7 +120,7 @@ The Intel MEI Driver supports the following IOCTL command: Notes: max_msg_length (MTU) in client properties describes the maximum data that can be sent or received. (e.g. if MTU=2K, can send - requests up to bytes 2k and received responses upto 2k bytes). + requests up to bytes 2k and received responses up to 2k bytes). Intel ME Applications: ============== diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index f98ca63..398d0fb 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -183,7 +183,7 @@ tcp_early_retrans - INTEGER for triggering fast retransmit when the amount of outstanding data is small and when no previously unsent data can be transmitted (such that limited transmit could be used). Also controls the use of - Tail loss probe (TLP) that converts RTOs occuring due to tail + Tail loss probe (TLP) that converts RTOs occurring due to tail losses into fast recovery (draft-dukkipati-tcpm-tcp-loss-probe-01). Possible values: 0 disables ER diff --git a/Documentation/networking/netlink_mmap.txt b/Documentation/networking/netlink_mmap.txt index 1c2dab4..9bd0f52 100644 --- a/Documentation/networking/netlink_mmap.txt +++ b/Documentation/networking/netlink_mmap.txt @@ -54,7 +54,7 @@ it will use an allocated socket buffer as usual and the contents will be copied to the ring on transmission, nullifying most of the performance gains. Dumps of kernel databases automatically support memory mapped I/O. -Conversion of the transmit path involves changing message contruction to +Conversion of the transmit path involves changing message construction to use memory from the TX ring instead of (usually) a buffer declared on the stack and setting up the frame header approriately. Optionally poll() can be used to wait for free frames in the TX ring. @@ -65,8 +65,8 @@ Structured and definitions for using memory mapped I/O are contained in RX and TX rings ---------------- -Each ring contains a number of continous memory blocks, containing frames of -fixed size dependant on the parameters used for ring setup. +Each ring contains a number of continuous memory blocks, containing frames of +fixed size dependent on the parameters used for ring setup. Ring: [ block 0 ] [ frame 0 ] @@ -80,7 +80,7 @@ Ring: [ block 0 ] [ frame 2 * n + 1 ] The blocks are only visible to the kernel, from the point of view of user-space -the ring just contains the frames in a continous memory zone. +the ring just contains the frames in a continuous memory zone. The ring parameters used for setting up the ring are defined as follows: @@ -91,7 +91,7 @@ struct nl_mmap_req { unsigned int nm_frame_nr; }; -Frames are grouped into blocks, where each block is a continous region of memory +Frames are grouped into blocks, where each block is a continuous region of memory and holds nm_block_size / nm_frame_size frames. The total number of frames in the ring is nm_frame_nr. The following invariants hold: @@ -113,7 +113,7 @@ Some parameters are constrained, specifically: - nm_frame_nr must equal the actual number of frames as specified above. -When the kernel can't allocate phsyically continous memory for a ring block, +When the kernel can't allocate physically continuous memory for a ring block, it will fall back to use physically discontinous memory. This might affect performance negatively, in order to avoid this the nm_frame_size parameter should be chosen to be as small as possible for the required frame size and diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index 447fd4c..d3c6d3dd 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt @@ -298,7 +298,7 @@ Since the pin controller subsystem have its pinspace local to the pin controller we need a mapping so that the pin control subsystem can figure out which pin controller handles control of a certain GPIO pin. Since a single pin controller may be muxing several GPIO ranges (typically SoCs that have -one set of pins but internally several GPIO silicon blocks, each modeled as +one set of pins but internally several GPIO silicon blocks, each modelled as a struct gpio_chip) any number of GPIO ranges can be added to a pin controller instance like this: diff --git a/Documentation/thermal/exynos_thermal_emulation b/Documentation/thermal/exynos_thermal_emulation index 36a3e79..b15efec 100644 --- a/Documentation/thermal/exynos_thermal_emulation +++ b/Documentation/thermal/exynos_thermal_emulation @@ -20,7 +20,7 @@ When it's enabled, sysfs node will be created as The sysfs node, 'emul_node', will contain value 0 for the initial state. When you input any temperature you want to update to sysfs node, it automatically enable emulation mode and current temperature will be changed into it. -(Exynos also supports user changable delay time which would be used to delay of +(Exynos also supports user changeable delay time which would be used to delay of changing temperature. However, this node only uses same delay of real sensing time, 938us.) Exynos emulation mode requires synchronous of value changing and enabling. It means when you diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 5f91eda..c2db6e3 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -1683,7 +1683,7 @@ The parameter is defined like this: This ioctl maps the memory at "user_addr" with the length "length" to the vcpu's address space starting at "vcpu_addr". All parameters need to -be alligned by 1 megabyte. +be aligned by 1 megabyte. 4.66 KVM_S390_UCAS_UNMAP @@ -1703,7 +1703,7 @@ The parameter is defined like this: This ioctl unmaps the memory in the vcpu's address space starting at "vcpu_addr" with the length "length". The field "user_addr" is ignored. -All parameters need to be alligned by 1 megabyte. +All parameters need to be aligned by 1 megabyte. 4.67 KVM_S390_VCPU_FAULT @@ -2019,7 +2019,7 @@ be OR'ed into the "vsid" argument of the slbmte instruction. The "enc" array is a list which for each of those segment base page size provides the list of supported actual page sizes (which can be only larger or equal to the base page size), along with the -corresponding encoding in the hash PTE. Similarily, the array is +corresponding encoding in the hash PTE. Similarly, the array is 8 entries sorted by increasing sizes and an entry with a "0" shift is an empty entry and a terminator: diff --git a/Documentation/vm/pagemap.txt b/Documentation/vm/pagemap.txt index 7587493..5ef3dd3 100644 --- a/Documentation/vm/pagemap.txt +++ b/Documentation/vm/pagemap.txt @@ -147,5 +147,5 @@ once. Other notes: Reading from any of the files will return -EINVAL if you are not starting -the read on an 8-byte boundary (e.g., if you seeked an odd number of bytes +the read on an 8-byte boundary (e.g., if you sought an odd number of bytes into the file), or if the size of the read is not a multiple of 8 bytes. diff --git a/Documentation/w1/slaves/w1_ds28e04 b/Documentation/w1/slaves/w1_ds28e04 index 85bc9a7..7819b65 100644 --- a/Documentation/w1/slaves/w1_ds28e04 +++ b/Documentation/w1/slaves/w1_ds28e04 @@ -24,7 +24,7 @@ Memory Access A write operation on the "eeprom" file writes the given byte sequence to the EEPROM of the DS28E04. If CRC checking mode is enabled only - fully alligned blocks of 32 bytes with valid CRC16 values (in bytes 30 + fully aligned blocks of 32 bytes with valid CRC16 values (in bytes 30 and 31) are allowed to be written. PIO Access -- cgit v1.1