From 1e2ac9821de6a85d3e8358f238436708d1d46869 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Fri, 31 Mar 2017 20:03:03 +0000 Subject: dt-bindings: Add thermal zone to bcm2835-thermal example Add a thermal zone in order to make the example complete. Signed-off-by: Stefan Wahren Acked-by: Rob Herring Signed-off-by: Eduardo Valentin --- .../bindings/thermal/brcm,bcm2835-thermal.txt | 32 +++++++++++++++++++--- 1 file changed, 28 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt index 474531d..da8c5b7 100644 --- a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt @@ -3,15 +3,39 @@ Binding for Thermal Sensor driver for BCM2835 SoCs. Required parameters: ------------------- -compatible: should be one of: "brcm,bcm2835-thermal", - "brcm,bcm2836-thermal" or "brcm,bcm2837-thermal" -reg: Address range of the thermal registers. -clocks: Phandle of the clock used by the thermal sensor. +compatible: should be one of: "brcm,bcm2835-thermal", + "brcm,bcm2836-thermal" or "brcm,bcm2837-thermal" +reg: Address range of the thermal registers. +clocks: Phandle of the clock used by the thermal sensor. +#thermal-sensor-cells: should be 0 (see thermal.txt) Example: +thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <80000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + coefficients = <(-538) 407000>; + + cooling-maps { + }; + }; +}; + thermal: thermal@7e212000 { compatible = "brcm,bcm2835-thermal"; reg = <0x7e212000 0x8>; clocks = <&clocks BCM2835_CLOCK_TSENS>; + #thermal-sensor-cells = <0>; }; -- cgit v1.1 From ee7cdbecb128d8b023c5439004cdea8baa2d0fe4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Mon, 3 Apr 2017 17:48:28 +0200 Subject: dt-bindings: thermal: add support for Broadcom's Northstar thermal MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This commit documents binding for thermal used in Northstar family SoCs. There isn't any known Northstar device with active cooling system so DT example has empty cooling-maps node. There is also no support for CPU frequency throttling so I put only a critical trip in the example. Signed-off-by: Rafał Miłecki Signed-off-by: Eduardo Valentin --- .../devicetree/bindings/thermal/brcm,ns-thermal | 37 ++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/brcm,ns-thermal (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal new file mode 100644 index 0000000..68e0471 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal @@ -0,0 +1,37 @@ +* Broadcom Northstar Thermal + +This binding describes thermal sensor that is part of Northstar's DMU (Device +Management Unit). + +Required properties: +- compatible : Must be "brcm,ns-thermal" +- reg : iomem address range of PVTMON registers +- #thermal-sensor-cells : Should be <0> + +Example: + +thermal: thermal@1800c2c0 { + compatible = "brcm,ns-thermal"; + reg = <0x1800c2c0 0x10>; + #thermal-sensor-cells = <0>; +}; + +thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + coefficients = <(-556) 418000>; + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; +}; -- cgit v1.1 From 28c1b08d2a156ef16e912a4c618a529e586e5dbc Mon Sep 17 00:00:00 2001 From: Steve Twiss Date: Tue, 28 Mar 2017 15:43:31 +0100 Subject: Documentation: devicetree: thermal: da9062/61 TJUNC temperature binding Device tree binding information for DA9062 and DA9061 thermal junction temperature monitor. Binding descriptions for the DA9061 and DA9062 thermal TJUNC supervisor device driver, using a single THERMAL_TRIP_HOT trip-wire and allowing for a configurable polling period for over-temperature polling. This patch also adds two examples, one for DA9062 and one for DA9061. The DA9061 example uses a fall-back compatible string for the DA9062. Acked-by: Rob Herring Signed-off-by: Steve Twiss Signed-off-by: Eduardo Valentin --- .../devicetree/bindings/thermal/da9062-thermal.txt | 36 ++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/da9062-thermal.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/thermal/da9062-thermal.txt b/Documentation/devicetree/bindings/thermal/da9062-thermal.txt new file mode 100644 index 0000000..e241bb5 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/da9062-thermal.txt @@ -0,0 +1,36 @@ +* Dialog DA9062/61 TJUNC Thermal Module + +This module is part of the DA9061/DA9062. For more details about entire +DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt + +Junction temperature thermal module uses an interrupt signal to identify +high THERMAL_TRIP_HOT temperatures for the PMIC device. + +Required properties: + +- compatible: should be one of the following valid compatible string lines: + "dlg,da9061-thermal", "dlg,da9062-thermal" + "dlg,da9062-thermal" + +Optional properties: + +- polling-delay-passive : Specify the polling period, measured in + milliseconds, between thermal zone device update checks. + +Example: DA9062 + + pmic0: da9062@58 { + thermal { + compatible = "dlg,da9062-thermal"; + polling-delay-passive = <3000>; + }; + }; + +Example: DA9061 using a fall-back compatible for the DA9062 onkey driver + + pmic0: da9061@58 { + thermal { + compatible = "dlg,da9061-thermal", "dlg,da9062-thermal"; + polling-delay-passive = <3000>; + }; + }; -- cgit v1.1 From ef1d87e06ab4d3f9a95f02517ecc50902dc233a7 Mon Sep 17 00:00:00 2001 From: Keerthy Date: Tue, 18 Apr 2017 09:59:59 +0530 Subject: thermal: core: Add a back up thermal shutdown mechanism orderly_poweroff is triggered when a graceful shutdown of system is desired. This may be used in many critical states of the kernel such as when subsystems detects conditions such as critical temperature conditions. However, in certain conditions in system boot up sequences like those in the middle of driver probes being initiated, userspace will be unable to power off the system in a clean manner and leaves the system in a critical state. In cases like these, the /sbin/poweroff will return success (having forked off to attempt powering off the system. However, the system overall will fail to completely poweroff (since other modules will be probed) and the system is still functional with no userspace (since that would have shut itself off). However, there is no clean way of detecting such failure of userspace powering off the system. In such scenarios, it is necessary for a backup workqueue to be able to force a shutdown of the system when orderly shutdown is not successful after a configurable time period. Reported-by: Nishanth Menon Signed-off-by: Keerthy Acked-by: Eduardo Valentin Signed-off-by: Zhang Rui --- Documentation/thermal/sysfs-api.txt | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'Documentation') diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index ef473dc..bb9a0a5 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -582,3 +582,24 @@ platform data is provided, this uses the step_wise throttling policy. This function serves as an arbitrator to set the state of a cooling device. It sets the cooling device to the deepest cooling state if possible. + +6. thermal_emergency_poweroff: + +On an event of critical trip temperature crossing. Thermal framework +allows the system to shutdown gracefully by calling orderly_poweroff(). +In the event of a failure of orderly_poweroff() to shut down the system +we are in danger of keeping the system alive at undesirably high +temperatures. To mitigate this high risk scenario we program a work +queue to fire after a pre-determined number of seconds to start +an emergency shutdown of the device using the kernel_power_off() +function. In case kernel_power_off() fails then finally +emergency_restart() is called in the worst case. + +The delay should be carefully profiled so as to give adequate time for +orderly_poweroff(). In case of failure of an orderly_poweroff() the +emergency poweroff kicks in after the delay has elapsed and shuts down +the system. + +If set to 0 emergency poweroff will not be supported. So a carefully +profiled non-zero positive value is a must for emergerncy poweroff to be +triggered. -- cgit v1.1