From 61ab1a90d81b5b8a53fc221a3665715c61614fb7 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 27 Jun 2011 13:32:33 +0100 Subject: dt: document the of_serial bindings The of_serial bindings can be used to register a number of serial devices. Document this binding with all of the others. v3: remove device-type and clarify used-by-rtas Signed-off-by: Jamie Iles Acked-by: Arnd Bergmann Signed-off-by: Grant Likely --- .../devicetree/bindings/tty/serial/of-serial.txt | 33 ++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/tty/serial/of-serial.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/tty/serial/of-serial.txt b/Documentation/devicetree/bindings/tty/serial/of-serial.txt new file mode 100644 index 0000000..35e53ae --- /dev/null +++ b/Documentation/devicetree/bindings/tty/serial/of-serial.txt @@ -0,0 +1,33 @@ +* UART (Universal Asynchronous Receiver/Transmitter) + +Required properties: +- compatible : one of: + - "ns8250" + - "ns16450" + - "ns16550a" + - "ns16550" + - "ns16750" + - "ns16850" + - "nvidia,tegra250-uart" + - "ibm,qpace-nwp-serial" + - "serial" if the port type is unknown. +- reg : offset and length of the register set for the device. +- interrupts : should contain uart interrupt. +- clock-frequency : the input clock frequency for the UART. + +Optional properties: +- current-speed : the current active speed of the UART. +- reg-offset : offset to apply to the mapbase from the start of the registers. +- reg-shift : quantity to shift the register offsets by. +- used-by-rtas : set to indicate that the port is in use by the OpenFirmware + RTAS and should not be registered. + +Example: + + uart@80230000 { + compatible = "ns8250"; + reg = <0x80230000 0x100>; + clock-frequency = <3686400>; + interrupts = <10>; + reg-shift = <2>; + }; -- cgit v1.1