From d52701d39e3765ad5087da1a6e8bbcaaf04bcd9c Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 12 Mar 2013 09:39:01 +0100 Subject: mfd: ab8500: Kill "reg" property from binding The ab8500 device is a child of the prcmu device, which is a memory mapped bus device, whose children are addressable using physical memory addresses, not using mailboxes, so a mailbox number in the ab8500 node cannot be parsed by DT. Nothing uses this number, since it was only introduced as part of the failed attempt to clean up prcmu mailbox handling, and we can simply remove it. Signed-off-by: Arnd Bergmann Signed-off-by: Samuel Ortiz --- Documentation/devicetree/bindings/mfd/ab8500.txt | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt index 13b707b..c3a14e0 100644 --- a/Documentation/devicetree/bindings/mfd/ab8500.txt +++ b/Documentation/devicetree/bindings/mfd/ab8500.txt @@ -13,9 +13,6 @@ Required parent device properties: 4 = active high level-sensitive 8 = active low level-sensitive -Optional parent device properties: -- reg : contains the PRCMU mailbox address for the AB8500 i2c port - The AB8500 consists of a large and varied group of sub-devices: Device IRQ Names Supply Names Description @@ -86,9 +83,8 @@ Non-standard child device properties: - stericsson,amic2-bias-vamic1 : Analoge Mic wishes to use a non-standard Vamic - stericsson,earpeice-cmv : Earpeice voltage (only: 950 | 1100 | 1270 | 1580) -ab8500@5 { +ab8500 { compatible = "stericsson,ab8500"; - reg = <5>; /* mailbox 5 is i2c */ interrupts = <0 40 0x4>; interrupt-controller; #interrupt-cells = <2>; -- cgit v1.1 From e06c93cacb82dd147266fd1bdb2d0a0bd45ff2c1 Mon Sep 17 00:00:00 2001 From: Ley Foon Tan Date: Thu, 7 Mar 2013 10:28:37 +0800 Subject: tty/serial: Add support for Altera serial port Add support for Altera 8250/16550 compatible serial port. Signed-off-by: Ley Foon Tan Cc: stable Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/tty/serial/of-serial.txt | 3 +++ 1 file changed, 3 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/tty/serial/of-serial.txt b/Documentation/devicetree/bindings/tty/serial/of-serial.txt index 1e1145c..8f01cb1 100644 --- a/Documentation/devicetree/bindings/tty/serial/of-serial.txt +++ b/Documentation/devicetree/bindings/tty/serial/of-serial.txt @@ -11,6 +11,9 @@ Required properties: - "nvidia,tegra20-uart" - "nxp,lpc3220-uart" - "ibm,qpace-nwp-serial" + - "altr,16550-FIFO32" + - "altr,16550-FIFO64" + - "altr,16550-FIFO128" - "serial" if the port type is unknown. - reg : offset and length of the register set for the device. - interrupts : should contain uart interrupt. -- cgit v1.1 From 25eba81b7fbbb14dde63fc85231c699fe77afc58 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 18 Mar 2013 21:19:49 +0100 Subject: hwmon: (lm75) Fix tcn75 prefix The TCN75 has its own prefix for a long time now. Signed-off-by: Jean Delvare Reviewed-by: Guenter Roeck --- Documentation/hwmon/lm75 | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/hwmon/lm75 b/Documentation/hwmon/lm75 index c91a1d1..69af1c7 100644 --- a/Documentation/hwmon/lm75 +++ b/Documentation/hwmon/lm75 @@ -23,7 +23,7 @@ Supported chips: Datasheet: Publicly available at the Maxim website http://www.maxim-ic.com/ * Microchip (TelCom) TCN75 - Prefix: 'lm75' + Prefix: 'tcn75' Addresses scanned: none Datasheet: Publicly available at the Microchip website http://www.microchip.com/ -- cgit v1.1 From 0c12582fbcdea0cbb0dfd224e1c5f9a8428ffa18 Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Sat, 9 Mar 2013 23:25:04 +0200 Subject: ipvs: add backup_only flag to avoid loops Dmitry Akindinov is reporting for a problem where SYNs are looping between the master and backup server when the backup server is used as real server in DR mode and has IPVS rules to function as director. Even when the backup function is enabled we continue to forward traffic and schedule new connections when the current master is using the backup server as real server. While this is not a problem for NAT, for DR and TUN method the backup server can not determine if a request comes from client or from director. To avoid such loops add new sysctl flag backup_only. It can be needed for DR/TUN setups that do not need backup and director function at the same time. When the backup function is enabled we stop any forwarding and pass the traffic to the local stack (real server mode). The flag disables the director function when the backup function is enabled. For setups that enable backup function for some virtual services and director function for other virtual services there should be another more complex solution to support DR/TUN mode, may be to assign per-virtual service syncid value, so that we can differentiate the requests. Reported-by: Dmitry Akindinov Tested-by: German Myzovsky Signed-off-by: Julian Anastasov Signed-off-by: Simon Horman --- Documentation/networking/ipvs-sysctl.txt | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'Documentation') diff --git a/Documentation/networking/ipvs-sysctl.txt b/Documentation/networking/ipvs-sysctl.txt index f2a2488..9573d0c 100644 --- a/Documentation/networking/ipvs-sysctl.txt +++ b/Documentation/networking/ipvs-sysctl.txt @@ -15,6 +15,13 @@ amemthresh - INTEGER enabled and the variable is automatically set to 2, otherwise the strategy is disabled and the variable is set to 1. +backup_only - BOOLEAN + 0 - disabled (default) + not 0 - enabled + + If set, disable the director function while the server is + in backup mode to avoid packet loops for DR/TUN methods. + conntrack - BOOLEAN 0 - disabled (default) not 0 - enabled -- cgit v1.1