From 2501ec14048d24d98651d2204cdf9cb33a127199 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Tue, 10 Oct 2017 22:08:55 -0700 Subject: dt-binding: soc: qcom: Add binding for rmtfs memory This adds the binding for describing shared memory used to exchange file system blocks between the RMTFS client and service. A client for this is generally found in the modem firmware and is used for accessing persistent storage for things such as radio calibration. Acked-by: Rob Herring Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- .../bindings/reserved-memory/qcom,rmtfs-mem.txt | 51 ++++++++++++++++++++++ 1 file changed, 51 insertions(+) create mode 100644 Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt new file mode 100644 index 0000000..8562ba1 --- /dev/null +++ b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt @@ -0,0 +1,51 @@ +Qualcomm Remote File System Memory binding + +This binding describes the Qualcomm remote filesystem memory, which serves the +purpose of describing the shared memory region used for remote processors to +access block device data using the Remote Filesystem protocol. + +- compatible: + Usage: required + Value type: + Definition: must be: + "qcom,rmtfs-mem" + +- reg: + Usage: required for static allocation + Value type: + Definition: must specify base address and size of the memory region, + as described in reserved-memory.txt + +- size: + Usage: required for dynamic allocation + Value type: + Definition: must specify a size of the memory region, as described in + reserved-memory.txt + +- qcom,client-id: + Usage: required + Value type: + Definition: identifier of the client to use this region for buffers. + +- qcom,vmid: + Usage: optional + Value type: + Definition: vmid of the remote processor, to set up memory protection. + += EXAMPLE +The following example shows the remote filesystem memory setup for APQ8016, +with the rmtfs region for the Hexagon DSP (id #1) located at 0x86700000. + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + rmtfs@86700000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x86700000 0x0 0xe0000>; + no-map; + + qcom,client-id = <1>; + }; + }; -- cgit v1.1