From 10ead6e59934be76b6ce255d6b842a432b207b7f Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 31 Oct 2013 19:41:20 -0700 Subject: LEDS: tca6507: add device-tree support for GPIO configuration. The 7 lines driven by the TCA6507 can either drive LEDs or act as output-only GPIOs. To make this distinction in devicetree we use the "compatible" property. If the device attached to a line is "compatible" with "gpio", we treat it like a GPIO. If it is "compatible" with "led" (or if no "compatible" value is set) we treat it like an LED. (cooloney@gmail.com: fix typo in the subject) Signed-off-by: NeilBrown Signed-off-by: Bryan Wu --- Documentation/devicetree/bindings/leds/tca6507.txt | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/leds/tca6507.txt b/Documentation/devicetree/bindings/leds/tca6507.txt index 80ff3df..d7221b8 100644 --- a/Documentation/devicetree/bindings/leds/tca6507.txt +++ b/Documentation/devicetree/bindings/leds/tca6507.txt @@ -2,6 +2,13 @@ LEDs connected to tca6507 Required properties: - compatible : should be : "ti,tca6507". +- #address-cells: must be 1 +- #size-cells: must be 0 +- reg: typically 0x45. + +Optional properties: +- gpio-controller: allows lines to be used as output-only GPIOs. +- #gpio-cells: if present, must be 0. Each led is represented as a sub-node of the ti,tca6507 device. @@ -10,6 +17,7 @@ LED sub-node properties: - reg : number of LED line (could be from 0 to 6) - linux,default-trigger : (optional) see Documentation/devicetree/bindings/leds/common.txt +- compatible: either "led" (the default) or "gpio". Examples: @@ -19,6 +27,9 @@ tca6507@45 { #size-cells = <0>; reg = <0x45>; + gpio-controller; + #gpio-cells = <2>; + led0: red-aux@0 { label = "red:aux"; reg = <0x0>; @@ -29,5 +40,10 @@ tca6507@45 { reg = <0x5>; linux,default-trigger = "default-on"; }; + + wifi-reset@6 { + reg = <0x6>; + compatible = "gpio"; + }; }; -- cgit v1.1