From 01dd2fbf0da4019c380b6ca22a074538fb31db5a Mon Sep 17 00:00:00 2001 From: Matt LaPlante Date: Sat, 20 Oct 2007 01:34:40 +0200 Subject: typo fixes Most of these fixes were already submitted for old kernel versions, and were approved, but for some reason they never made it into the releases. Because this is a consolidation of a couple old missed patches, it touches both Kconfigs and documentation texts. Signed-off-by: Matt LaPlante Acked-by: Randy Dunlap Signed-off-by: Adrian Bunk --- Documentation/scsi/aic79xx.txt | 2 +- Documentation/scsi/aic7xxx.txt | 6 ++--- Documentation/scsi/ibmmca.txt | 58 +++++++++++++++++++++--------------------- 3 files changed, 33 insertions(+), 33 deletions(-) (limited to 'Documentation/scsi') diff --git a/Documentation/scsi/aic79xx.txt b/Documentation/scsi/aic79xx.txt index 6aa9a89..683ccae 100644 --- a/Documentation/scsi/aic79xx.txt +++ b/Documentation/scsi/aic79xx.txt @@ -120,7 +120,7 @@ The following information is available in this file: list size to avoid SCSI malloc pool fragmentation. - Cleanup channel display in our /proc output. - Workaround duplicate device entries in the mid-layer - devlice list during add-single-device. + device list during add-single-device. 1.3.6 (March 28th, 2003) - Correct a double free in the Domain Validation code. diff --git a/Documentation/scsi/aic7xxx.txt b/Documentation/scsi/aic7xxx.txt index 5f34d2b..b7e238c 100644 --- a/Documentation/scsi/aic7xxx.txt +++ b/Documentation/scsi/aic7xxx.txt @@ -159,7 +159,7 @@ The following information is available in this file: - Add support for 2.5.X's scsi_report_device_reset(). 6.2.34 (May 5th, 2003) - - Fix locking regression instroduced in 6.2.29 that + - Fix locking regression introduced in 6.2.29 that could cause a lock order reversal between the io_request_lock and our per-softc lock. This was only possible on RH9, SuSE, and kernel.org 2.4.X kernels. @@ -264,7 +264,7 @@ The following information is available in this file: Option: tag_info:{{value[,value...]}[,{value[,value...]}...]} Definition: Set the per-target tagged queue depth on a per controller basis. Both controllers and targets - may be ommitted indicating that they should retain + may be omitted indicating that they should retain the default tag depth. Examples: tag_info:{{16,32,32,64,8,8,,32,32,32,32,32,32,32,32,32} On Controller 0 @@ -290,7 +290,7 @@ The following information is available in this file: ----------------------------------------------------------------- Option: dv: {value[,value...]} Definition: Set Domain Validation Policy on a per-controller basis. - Controllers may be ommitted indicating that + Controllers may be omitted indicating that they should retain the default read streaming setting. Example: dv:{-1,0,,1,1,0} On Controller 0 leave DV at its default setting. diff --git a/Documentation/scsi/ibmmca.txt b/Documentation/scsi/ibmmca.txt index a08e225..a810421 100644 --- a/Documentation/scsi/ibmmca.txt +++ b/Documentation/scsi/ibmmca.txt @@ -21,7 +21,7 @@ versions older than 4.0 do not work with kernels 2.4.0 or later! If you try to compile your kernel with the wrong driver source, the compilation is aborted and you get a corresponding error message. This is - no bug in the driver. It prevents you from using the wrong sourcecode + no bug in the driver; it prevents you from using the wrong source code with the wrong kernel version. Authors of this Driver @@ -58,7 +58,7 @@ 5 Users' Manual 5.1 Commandline Parameters 5.2 Troubleshooting - 5.3 Bugreports + 5.3 Bug reports 5.4 Support WWW-page 6 References 7 Credits to @@ -71,13 +71,13 @@ 1 Abstract ---------- - This README-file describes the IBM SCSI-subsystem low level driver for - Linux. The descriptions which were formerly kept in the source-code have - been taken out to this file to easify the codes' readability. The driver + This README-file describes the IBM SCSI-subsystem low level driver for + Linux. The descriptions which were formerly kept in the source code have + been taken out of this file to simplify the codes readability. The driver description has been updated, as most of the former description was already - quite outdated. The history of the driver development is also kept inside - here. Multiple historical developments have been summarized to shorten the - textsize a bit. At the end of this file you can find a small manual for + quite outdated. The history of the driver development is also kept inside + here. Multiple historical developments have been summarized to shorten the + text size a bit. At the end of this file you can find a small manual for this driver and hints to get it running on your machine. 2 Driver Description @@ -186,7 +186,7 @@ between 0 and 7). The IBM SCSI-2 F/W adapter offers this on up to two busses and provides support for 30 logical devices at the same time, where in wide-addressing mode you can have 16 puns with 32 luns on each device. - This section dexribes you the handling of devices on non-F/W adapters. + This section describes the handling of devices on non-F/W adapters. Just imagine, that you can have 16 * 32 = 512 devices on a F/W adapter which means a lot of possible devices for such a small machine. @@ -209,10 +209,10 @@ -------------------------------------------------------- One consequence of information hiding is that the real (pun,lun) numbers are also hidden. The two possibilities to get around this problem - is to offer fake pun/lun combinations to the operating system or to + are to offer fake pun/lun combinations to the operating system or to delete the whole mapping of the adapter and to reassign the ldns, using the immediate assign command of the SCSI-subsystem for probing through - all possible pun/lun combinations. a ldn is a "logical device number" + all possible pun/lun combinations. An ldn is a "logical device number" which is used by IBM SCSI-subsystems to access some valid SCSI-device. At the beginning of the development of this driver, the following approach was used: @@ -251,9 +251,9 @@ lun>0 or to non-existing devices, in order to satisfy the subsystem, if there are less than 15 SCSI-devices connected. In the case of more than 15 devices, the dynamical mapping goes active. If the get_scsi[][] reports a - device to be existant, but it has no ldn assigned, it gets a ldn out of 7 - to 14. The numbers are assigned in cyclic order. Therefore it takes 8 - dynamical reassignments on the SCSI-devices, until a certain device + device to be existent, but it has no ldn assigned, it gets an ldn out of 7 + to 14. The numbers are assigned in cyclic order, therefore it takes 8 + dynamical reassignments on the SCSI-devices until a certain device loses its ldn again. This assures that dynamical remapping is avoided during intense I/O between up to 15 SCSI-devices (means pun,lun combinations). A further advantage of this method is that people who @@ -551,7 +551,7 @@ than devices are available, they are assigned to non existing pun,lun combinations to satisfy the adapter. With this, the dynamical mapping was possible to implement. (For further info see the text in the - source-code and in the description below. Read the description + source code and in the description below. Read the description below BEFORE installing this driver on your system!) 2) Changed the name IBMMCA_DRIVER_VERSION to IBMMCA_SCSI_DRIVER_VERSION. 3) The LED-display shows on PS/2-95 no longer the ldn, but the SCSI-ID @@ -762,9 +762,9 @@ - Michael Lang Apr 23, 2000 (v3.2pre1) - 1) During a very long time, I collected a huge amount of bugreports from + 1) During a very long time, I collected a huge amount of bug reports from various people, trying really quite different things on their SCSI- - PS/2s. Today, all these bugreports are taken into account and should be + PS/2s. Today, all these bug reports are taken into account and should be mostly solved. The major topics were: - Driver crashes during boottime by no obvious reason. - Driver panics while the midlevel-SCSI-driver is trying to inquire @@ -819,7 +819,7 @@ - Michael Lang July 17, 2000 (v3.2pre8) - A long period of collecting bugreports from all corners of the world + A long period of collecting bug reports from all corners of the world now lead to the following corrections to the code: 1) SCSI-2 F/W support crashed with a COMMAND ERROR. The reason for this was that it is possible to disable Fast-SCSI for the external bus. @@ -873,7 +873,7 @@ July 26, 2000 (v3.2pre11) 1) I passed a horrible weekend getting mad with NMIs on kernel 2.2.14 and a model 9595. Asking around in the community, nobody except of me has - seen such errors. Weired, but I am trying to recompile everything on + seen such errors. Weird, but I am trying to recompile everything on the model 9595. Maybe, as I use a specially modified gcc, that could cause problems. But, it was not the reason. The true background was, that the kernel was compiled for i386 and the 9595 has a 486DX-2. @@ -886,7 +886,7 @@ alive rotator during boottime. This makes sense, when no monitor is connected to the system. You can get rid of all display activity, if you do not use any parameter or just ibmmcascsi=activity, for the - harddrive activity LED, existant on all PS/2, except models 8595-XXX. + harddrive activity LED, existent on all PS/2, except models 8595-XXX. If no monitor is available, please use ibmmcascsi=display, which works fine together with the linuxinfo utility for the LED-panel. - Michael Lang @@ -1115,7 +1115,7 @@ If this really happens, do also send e-mail to the maintainer, as forced detection should be never necessary. Forced detection is in principal some flaw of the driver adapter detection and goes into - bugreports. + bug reports. Q: The driver screws up, if it starts to probe SCSI-devices, is there some way out of it? A: Yes, that was some recognition problem of the correct SCSI-adapter @@ -1172,7 +1172,7 @@ recommended version is 3.2 or later. Here, the F/W support is in a stable and reliable condition. Wide-addressing is in addition supported. - Q: I get a Ooops message and something like "killing interrupt". + Q: I get an Oops message and something like "killing interrupt". A: The reason for this is that the IBM SCSI-subsystem only sends a termination status back, if some error appeared. In former releases of the driver, it was not checked, if the termination status block @@ -1213,21 +1213,21 @@ problem. Not yet tried, but guessing that it could work. To get this, set unchecked_isa_dma argument of ibmmca.h from 0 to 1. - 5.3 Bugreports + 5.3 Bug reports -------------- - If you really find bugs in the sourcecode or the driver will successfully + If you really find bugs in the source code or the driver will successfully refuse to work on your machine, you should send a bug report to me. The best for this is to follow the instructions on the WWW-page for this driver. Fill out the bug-report form, placed on the WWW-page and ship it, so the bugs can be taken into account with maximum efforts. But, please do not send bug reports about this driver to Linus Torvalds or Leonard - Zubkoff, as Linus is burried in E-Mail and Leonard is supervising all + Zubkoff, as Linus is buried in E-Mail and Leonard is supervising all SCSI-drivers and won't have the time left to look inside every single driver to fix a bug and especially DO NOT send modified code to Linus Torvalds or Alan J. Cox which has not been checked here!!! They are both - quite burried in E-mail (as me, sometimes, too) and one should first check + quite buried in E-mail (as me, sometimes, too) and one should first check for problems on my local teststand. Recently, I got a lot of - bugreports for errors in the ibmmca.c code, which I could not imagine, but + bug reports for errors in the ibmmca.c code, which I could not imagine, but a look inside some Linux-distribution showed me quite often some modified code, which did no longer work on most other machines than the one of the modifier. Ok, so now that there is maintenance service available for this @@ -1261,7 +1261,7 @@ some e-mail directly, but at least with the same information as required by the formular. - If you have extensive bugreports, including Ooops messages and + If you have extensive bug reports, including Oops messages and screen-shots, please feel free to send it directly to the address of the maintainer, too. The current address of the maintainer is: @@ -1318,7 +1318,7 @@ detailed bug reports and ideas for this driver (and his patience ;-)). Alan J. Cox - for his bugreports and his bold activities in cross-checking + for his bug reports and his bold activities in cross-checking the driver-code with his teststand. 7.2 Sponsors & Supporters -- cgit v1.1