From a027b33348df3512d7680eed29bada1247f01ad7 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Fri, 23 Jul 2010 04:00:38 +0000 Subject: powerpc/5121: doc/dts-bindings: update doc of FSL DIU bindings Update compatible and interrupt properties description. Furthermore an example for the MPC5121 has been added. Signed-off-by: Anatolij Gustschin Acked-by: Timur Tabi Signed-off-by: Grant Likely --- Documentation/powerpc/dts-bindings/fsl/diu.txt | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'Documentation/powerpc') diff --git a/Documentation/powerpc/dts-bindings/fsl/diu.txt b/Documentation/powerpc/dts-bindings/fsl/diu.txt index deb35de..326cddf 100644 --- a/Documentation/powerpc/dts-bindings/fsl/diu.txt +++ b/Documentation/powerpc/dts-bindings/fsl/diu.txt @@ -4,10 +4,12 @@ The Freescale DIU is a LCD controller, with proper hardware, it can also drive DVI monitors. Required properties: -- compatible : should be "fsl-diu". +- compatible : should be "fsl,diu" or "fsl,mpc5121-diu". - reg : should contain at least address and length of the DIU register set. -- Interrupts : one DIU interrupt should be describe here. +- interrupts : one DIU interrupt should be described here. +- interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. Example (MPC8610HPCD): display@2c000 { @@ -16,3 +18,11 @@ Example (MPC8610HPCD): interrupts = <72 2>; interrupt-parent = <&mpic>; }; + +Example for MPC5121: + display@2100 { + compatible = "fsl,mpc5121-diu"; + reg = <0x2100 0x100>; + interrupts = <64 0x8>; + interrupt-parent = <&ipic>; + }; -- cgit v1.1 From 8b856f040c09024aa9d1f363c1a5cf2d3db73ebd Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Fri, 23 Jul 2010 04:00:39 +0000 Subject: powerpc/fsl-diu-fb: Support setting display mode using EDID Adds support for encoding display mode information in the device tree using verbatim EDID block. If the EDID entry in the DIU node is present, the driver will build mode database using EDID data and allow setting the display modes from this database. Otherwise display mode will be set using mode entries from driver's internal database as usual. This patch also updates device tree bindings. Signed-off-by: Anatolij Gustschin Acked-by: Timur Tabi Signed-off-by: Grant Likely --- Documentation/powerpc/dts-bindings/fsl/diu.txt | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'Documentation/powerpc') diff --git a/Documentation/powerpc/dts-bindings/fsl/diu.txt b/Documentation/powerpc/dts-bindings/fsl/diu.txt index 326cddf..b66cb6d 100644 --- a/Documentation/powerpc/dts-bindings/fsl/diu.txt +++ b/Documentation/powerpc/dts-bindings/fsl/diu.txt @@ -11,6 +11,11 @@ Required properties: - interrupt-parent : the phandle for the interrupt controller that services interrupts for this device. +Optional properties: +- edid : verbatim EDID data block describing attached display. + Data from the detailed timing descriptor will be used to + program the display controller. + Example (MPC8610HPCD): display@2c000 { compatible = "fsl,diu"; @@ -25,4 +30,5 @@ Example for MPC5121: reg = <0x2100 0x100>; interrupts = <64 0x8>; interrupt-parent = <&ipic>; + edid = [edid-data]; }; -- cgit v1.1 From 0c2daaafcdec726e89cbccca61d576de8429c537 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Albrecht=20Dre=C3=9F?= Date: Wed, 17 Feb 2010 08:59:14 +0000 Subject: powerpc/5200/i2c: improve i2c bus error recovery MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch improves the recovery of the MPC's I2C bus from errors like bus hangs resulting in timeouts: 1. make the bus timeout configurable, as it depends on the bus clock and the attached slave chip(s); default is still 1 second; 2. detect any of the cases indicated by the CF, BB and RXAK MSR flags if a timeout occurs, and add a missing (required) MAL reset; 3. use a more reliable method to fixup the bus if a hang has been detected. The sequence is sent 9 times which seems to be necessary if a slave "misses" more than one clock cycle. For 400 kHz bus speed, the fixup is also ~70us (81us vs. 150us) faster. Tested on a custom Lite5200b derived board, with a Dallas RTC, AD sensors and NXP IO expander chips attached to the i2c. Changes vs. v1: - use improved bus fixup sequence for all chips (not only the 5200) - calculate real clock from defaults if no clock is given in the device tree - better description (I hope) of the changes. I didn't split the changes in this file into three parts as recommended by Grant, as they actually belong together (i.e. they address one single problem, just in three places of one single source file). Signed-off-by: Albrecht Dreß [grant.likely@secretlab.ca: fixup for ->node to ->dev.of_node transition] Signed-off-by: Grant Likely --- Documentation/powerpc/dts-bindings/fsl/i2c.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/powerpc') diff --git a/Documentation/powerpc/dts-bindings/fsl/i2c.txt b/Documentation/powerpc/dts-bindings/fsl/i2c.txt index 50da203..1eacd6b 100644 --- a/Documentation/powerpc/dts-bindings/fsl/i2c.txt +++ b/Documentation/powerpc/dts-bindings/fsl/i2c.txt @@ -20,6 +20,7 @@ Recommended properties : - fsl,preserve-clocking : boolean; if defined, the clock settings from the bootloader are preserved (not touched). - clock-frequency : desired I2C bus clock frequency in Hz. + - fsl,timeout : I2C bus timeout in microseconds. Examples : @@ -59,4 +60,5 @@ Examples : interrupts = <43 2>; interrupt-parent = <&mpic>; clock-frequency = <400000>; + fsl,timeout = <10000>; }; -- cgit v1.1