From cab7faca5e446b84e829d57d2095035d72edba09 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Wed, 27 Jun 2012 09:53:47 +0200 Subject: Input: MT - Include win8 support The newly released HID protocol for win8 multitouch devices is capable of transmitting more information about each touch. In particular, it includes details useful for touch alignment. This patch completes the MT protocol with the ABS_MT_TOOL_X/Y events, and documents how to map win8 devices. Cc: Stephane Chatty Cc: Benjamin Tissoires Cc: Peter Hutterer Acked-by: Chase Douglas Signed-off-by: Henrik Rydberg --- Documentation/input/multi-touch-protocol.txt | 118 +++++++++++++++++++++------ 1 file changed, 92 insertions(+), 26 deletions(-) (limited to 'Documentation/input') diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt index 543101c..2c17961 100644 --- a/Documentation/input/multi-touch-protocol.txt +++ b/Documentation/input/multi-touch-protocol.txt @@ -162,26 +162,48 @@ are divided into categories, to allow for partial implementation. The minimum set consists of ABS_MT_POSITION_X and ABS_MT_POSITION_Y, which allows for multiple contacts to be tracked. If the device supports it, the ABS_MT_TOUCH_MAJOR and ABS_MT_WIDTH_MAJOR may be used to provide the size -of the contact area and approaching contact, respectively. +of the contact area and approaching tool, respectively. The TOUCH and WIDTH parameters have a geometrical interpretation; imagine looking through a window at someone gently holding a finger against the glass. You will see two regions, one inner region consisting of the part of the finger actually touching the glass, and one outer region formed by -the perimeter of the finger. The diameter of the inner region is the -ABS_MT_TOUCH_MAJOR, the diameter of the outer region is -ABS_MT_WIDTH_MAJOR. Now imagine the person pressing the finger harder -against the glass. The inner region will increase, and in general, the -ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR, which is always smaller than -unity, is related to the contact pressure. For pressure-based devices, +the perimeter of the finger. The center of the touching region (a) is +ABS_MT_POSITION_X/Y and the center of the approaching finger (b) is +ABS_MT_TOOL_X/Y. The touch diameter is ABS_MT_TOUCH_MAJOR and the finger +diameter is ABS_MT_WIDTH_MAJOR. Now imagine the person pressing the finger +harder against the glass. The touch region will increase, and in general, +the ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR, which is always smaller +than unity, is related to the contact pressure. For pressure-based devices, ABS_MT_PRESSURE may be used to provide the pressure on the contact area instead. Devices capable of contact hovering can use ABS_MT_DISTANCE to indicate the distance between the contact and the surface. -In addition to the MAJOR parameters, the oval shape of the contact can be -described by adding the MINOR parameters, such that MAJOR and MINOR are the -major and minor axis of an ellipse. Finally, the orientation of the oval -shape can be describe with the ORIENTATION parameter. + + Linux MT Win8 + __________ _______________________ + / \ | | + / \ | | + / ____ \ | | + / / \ \ | | + \ \ a \ \ | a | + \ \____/ \ | | + \ \ | | + \ b \ | b | + \ \ | | + \ \ | | + \ \ | | + \ / | | + \ / | | + \ / | | + \__________/ |_______________________| + + +In addition to the MAJOR parameters, the oval shape of the touch and finger +regions can be described by adding the MINOR parameters, such that MAJOR +and MINOR are the major and minor axis of an ellipse. The orientation of +the touch ellipse can be described with the ORIENTATION parameter, and the +direction of the finger ellipse is given by the vector (a - b). For type A devices, further specification of the touch shape is possible via ABS_MT_BLOB_ID. @@ -224,7 +246,7 @@ tool. Omit if circular [4]. The above four values can be used to derive additional information about the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates the notion of pressure. The fingers of the hand and the palm all have -different characteristic widths [1]. +different characteristic widths. ABS_MT_PRESSURE @@ -240,17 +262,24 @@ the contact is hovering above the surface. ABS_MT_ORIENTATION -The orientation of the ellipse. The value should describe a signed quarter -of a revolution clockwise around the touch center. The signed value range -is arbitrary, but zero should be returned for a finger aligned along the Y -axis of the surface, a negative value when finger is turned to the left, and -a positive value when finger turned to the right. When completely aligned with -the X axis, the range max should be returned. Orientation can be omitted -if the touching object is circular, or if the information is not available -in the kernel driver. Partial orientation support is possible if the device -can distinguish between the two axis, but not (uniquely) any values in -between. In such cases, the range of ABS_MT_ORIENTATION should be [0, 1] -[4]. +The orientation of the touching ellipse. The value should describe a signed +quarter of a revolution clockwise around the touch center. The signed value +range is arbitrary, but zero should be returned for an ellipse aligned with +the Y axis of the surface, a negative value when the ellipse is turned to +the left, and a positive value when the ellipse is turned to the +right. When completely aligned with the X axis, the range max should be +returned. + +Touch ellipsis are symmetrical by default. For devices capable of true 360 +degree orientation, the reported orientation must exceed the range max to +indicate more than a quarter of a revolution. For an upside-down finger, +range max * 2 should be returned. + +Orientation can be omitted if the touch area is circular, or if the +information is not available in the kernel driver. Partial orientation +support is possible if the device can distinguish between the two axis, but +not (uniquely) any values in between. In such cases, the range of +ABS_MT_ORIENTATION should be [0, 1] [4]. ABS_MT_POSITION_X @@ -260,6 +289,23 @@ ABS_MT_POSITION_Y The surface Y coordinate of the center of the touching ellipse. +ABS_MT_TOOL_X + +The surface X coordinate of the center of the approaching tool. Omit if +the device cannot distinguish between the intended touch point and the +tool itself. + +ABS_MT_TOOL_Y + +The surface Y coordinate of the center of the approaching tool. Omit if the +device cannot distinguish between the intended touch point and the tool +itself. + +The four position values can be used to separate the position of the touch +from the position of the tool. If both positions are present, the major +tool axis points towards the touch point [1]. Otherwise, the tool axes are +aligned with the touch axes. + ABS_MT_TOOL_TYPE The type of approaching tool. A lot of kernel drivers cannot distinguish @@ -305,6 +351,28 @@ The range of ABS_MT_ORIENTATION should be set to [0, 1], to indicate that the device can distinguish between a finger along the Y axis (0) and a finger along the X axis (1). +For win8 devices with both T and C coordinates, the position mapping is + + ABS_MT_POSITION_X := T_X + ABS_MT_POSITION_Y := T_Y + ABS_MT_TOOL_X := C_X + ABS_MT_TOOL_X := C_Y + +Unfortunately, there is not enough information to specify both the touching +ellipse and the tool ellipse, so one has to resort to approximations. One +simple scheme, which is compatible with earlier usage, is: + + ABS_MT_TOUCH_MAJOR := min(X, Y) + ABS_MT_TOUCH_MINOR := + ABS_MT_ORIENTATION := + ABS_MT_WIDTH_MAJOR := min(X, Y) + distance(T, C) + ABS_MT_WIDTH_MINOR := min(X, Y) + +Rationale: We have no information about the orientation of the touching +ellipse, so approximate it with an inscribed circle instead. The tool +ellipse should align with the the vector (T - C), so the diameter must +increase with distance(T, C). Finally, assume that the touch diameter is +equal to the tool thickness, and we arrive at the formulas above. Finger Tracking --------------- @@ -338,9 +406,7 @@ subsequent events of the same type refer to different fingers. For example usage of the type A protocol, see the bcm5974 driver. For example usage of the type B protocol, see the hid-egalax driver. -[1] With the extension ABS_MT_APPROACH_X and ABS_MT_APPROACH_Y, the -difference between the contact position and the approaching tool position -could be used to derive tilt. +[1] Also, the difference (TOOL_X - POSITION_X) can be used to model tilt. [2] The list can of course be extended. [3] The mtdev project: http://bitmath.org/code/mtdev/. [4] See the section on event computation. -- cgit v1.1