From 8c22a8f57516275afcd81c84f3724ac08cf6aa7b Mon Sep 17 00:00:00 2001 From: Dirk Eibach Date: Mon, 21 Mar 2011 17:59:36 +0100 Subject: hwmon: Add support for Texas Instruments ADS1015 Signed-off-by: Dirk Eibach Signed-off-by: Jean Delvare --- Documentation/hwmon/ads1015 | 67 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 Documentation/hwmon/ads1015 (limited to 'Documentation/hwmon/ads1015') diff --git a/Documentation/hwmon/ads1015 b/Documentation/hwmon/ads1015 new file mode 100644 index 0000000..56ee797 --- /dev/null +++ b/Documentation/hwmon/ads1015 @@ -0,0 +1,67 @@ +Kernel driver ads1015 +===================== + +Supported chips: + * Texas Instruments ADS1015 + Prefix: 'ads1015' + Datasheet: Publicly available at the Texas Instruments website : + http://focus.ti.com/lit/ds/symlink/ads1015.pdf + +Authors: + Dirk Eibach, Guntermann & Drunck GmbH + +Description +----------- + +This driver implements support for the Texas Instruments ADS1015. + +This device is a 12-bit A-D converter with 4 inputs. + +The inputs can be used single ended or in certain differential combinations. + +The inputs can be exported to 8 sysfs input files in0_input - in7_input: +in0: Voltage over AIN0 and AIN1. +in1: Voltage over AIN0 and AIN3. +in2: Voltage over AIN1 and AIN3. +in3: Voltage over AIN2 and AIN3. +in4: Voltage over AIN0 and GND. +in5: Voltage over AIN1 and GND. +in6: Voltage over AIN2 and GND. +in7: Voltage over AIN3 and GND. + +Which inputs are exported can be configured using platform data or devicetree. + +By default all inputs are exported. + +Platform Data +------------- + +In linux/i2c/ads1015.h platform data is defined as: + +struct ads1015_platform_data { + unsigned int exported_channels; +}; + +exported_channels is a bitmask that specifies which inputs should be exported. + +Example: +struct ads1015_platform_data data = { + .exported_channels = (1 << 2) | (1 << 4) +}; + +In this case only in2_input and in4_input would be created. + +Devicetree +---------- + +The ads1015 node may have an "exported-channels" property. +exported_channels is a bitmask that specifies which inputs should be exported. + +Example: +ads1015@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + exported-channels = < 0x14 >; +}; + +In this case only in2_input and in4_input would be created. -- cgit v1.1