From ae80d64ee8c88b77c58254bcdc5c0981faab672d Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 1 Sep 2015 10:46:15 +0200 Subject: Documentation: gpio: Explain that -gpio is also supported The GPIO documentation mentions that GPIOs are mapped by defining a -gpios property in the consumer device's node but a -gpio sufix is also supported after commit: dd34c37aa3e8 ("gpio: of: Allow -gpio suffix for property names") Update the documentation to match the implementation. Signed-off-by: Javier Martinez Canillas Signed-off-by: Linus Walleij --- Documentation/gpio/board.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation/gpio') diff --git a/Documentation/gpio/board.txt b/Documentation/gpio/board.txt index 5fa069a..f59c43b 100644 --- a/Documentation/gpio/board.txt +++ b/Documentation/gpio/board.txt @@ -21,8 +21,8 @@ exact way to do it depends on the GPIO controller providing the GPIOs, see the device tree bindings for your controller. GPIOs mappings are defined in the consumer device's node, in a property named --gpios, where is the function the driver will request -through gpiod_get(). For example: +either -gpios or -gpio, where is the function +the driver will request through gpiod_get(). For example: foo_device { compatible = "acme,foo"; @@ -31,7 +31,7 @@ through gpiod_get(). For example: <&gpio 16 GPIO_ACTIVE_HIGH>, /* green */ <&gpio 17 GPIO_ACTIVE_HIGH>; /* blue */ - power-gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + power-gpio = <&gpio 1 GPIO_ACTIVE_LOW>; }; This property will make GPIOs 15, 16 and 17 available to the driver under the -- cgit v1.1