From 87e77e46c61a9333227ab41cdefb1875758a4f13 Mon Sep 17 00:00:00 2001 From: Dirk Behme Date: Wed, 2 Sep 2015 20:07:10 +0200 Subject: Documentation: gpio: board: describe the con_id parameter The con_id parameter has to match the GPIO description and is automatically extended by the GPIO suffix if not NULL. I had to look into the code to understand this and properly find the GPIO I've been looking for, so document this. Signed-off-by: Dirk Behme Acked-by: Alexandre Courbot Signed-off-by: Linus Walleij --- Documentation/gpio/board.txt | 9 +++++++++ Documentation/gpio/consumer.txt | 3 +++ 2 files changed, 12 insertions(+) (limited to 'Documentation/gpio') diff --git a/Documentation/gpio/board.txt b/Documentation/gpio/board.txt index 9edd5af..5fa069a 100644 --- a/Documentation/gpio/board.txt +++ b/Documentation/gpio/board.txt @@ -48,6 +48,15 @@ This property will make GPIOs 15, 16 and 17 available to the driver under the The led GPIOs will be active-high, while the power GPIO will be active-low (i.e. gpiod_is_active_low(power) will be true). +The second parameter of the gpiod_get() functions, the con_id string, has to be +the -prefix of the GPIO suffixes ("gpios" or "gpio", automatically +looked up by the gpiod functions internally) used in the device tree. With above +"led-gpios" example, use the prefix without the "-" as con_id parameter: "led". + +Internally, the GPIO subsystem prefixes the GPIO suffix ("gpios" or "gpio") +with the string passed in con_id to get the resulting string +(snprintf(... "%s-%s", con_id, gpio_suffixes[]). + ACPI ---- ACPI also supports function names for GPIOs in a similar fashion to DT. diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt index a206639..e000502 100644 --- a/Documentation/gpio/consumer.txt +++ b/Documentation/gpio/consumer.txt @@ -39,6 +39,9 @@ device that displays digits), an additional index argument can be specified: const char *con_id, unsigned int idx, enum gpiod_flags flags) +For a more detailed description of the con_id parameter in the DeviceTree case +see Documentation/gpio/board.txt + The flags parameter is used to optionally specify a direction and initial value for the GPIO. Values can be: -- cgit v1.1