From faf93ff6ed5f6406ca51ec6d60f85fa166fe545c Mon Sep 17 00:00:00 2001 From: Giridhar Maruthy Date: Thu, 24 Jan 2013 11:27:51 -0800 Subject: i2c: s3c2410: Add quirk to exclude GPIO config for exynos5440 Signed-off-by: Giridhar Maruthy Signed-off-by: Kukjin Kim Signed-off-by: Wolfram Sang --- Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt index e9611ac..f98d4c5 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt @@ -8,6 +8,8 @@ Required properties: (b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c. (c) "samsung, s3c2440-hdmiphy-i2c", for s3c2440-like i2c used inside HDMIPHY block found on several samsung SoCs + (d) "samsung, exynos5440-i2c", for s3c2440-like i2c used + on EXYNOS5440 which does not need GPIO configuration. - reg: physical base address of the controller and length of memory mapped region. - interrupts: interrupt number to the cpu. -- cgit v1.1 From f3b54b9a066edeac5c06e1cdcd82e1cb1224aaef Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 11 Feb 2013 19:47:56 -0700 Subject: i2c: add bcm2835 driver This implements a very basic I2C host driver for the BCM2835 SoC. Missing features so far are: * 10-bit addressing. * DMA. Reviewed-by: Grant Likely Signed-off-by: Stephen Warren Signed-off-by: Wolfram Sang --- .../devicetree/bindings/i2c/brcm,bcm2835-i2c.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt new file mode 100644 index 0000000..e9de375 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt @@ -0,0 +1,20 @@ +Broadcom BCM2835 I2C controller + +Required properties: +- compatible : Should be "brcm,bcm2835-i2c". +- reg: Should contain register location and length. +- interrupts: Should contain interrupt. +- clocks : The clock feeding the I2C controller. + +Recommended properties: +- clock-frequency : desired I2C bus clock frequency in Hz. + +Example: + +i2c@20205000 { + compatible = "brcm,bcm2835-i2c"; + reg = <0x7e205000 0x1000>; + interrupts = <2 21>; + clocks = <&clk_i2c>; + clock-frequency = <100000>; +}; -- cgit v1.1