From df2e90551b7db4b5a4da5eaa78742f47f2799aa2 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 29 Feb 2016 17:23:17 +0100 Subject: dt-bindings: gpio: altera: Fix altr,interrupt-type property The altr,interrupt-trigger property is not used by the driver. Instead, altr,interrupt-type is used by the driver and the driver does not probe if this property is not specified. Therefore, it is expected that there are no users of the -trigger property in the wild and that this is a typo in the documentation for the altera-pio controller. This patch fixes the typo. Signed-off-by: Marek Vasut Cc: Tien Hock Loh Cc: Linus Walleij Signed-off-by: Linus Walleij --- Documentation/devicetree/bindings/gpio/gpio-altera.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/devicetree/bindings') diff --git a/Documentation/devicetree/bindings/gpio/gpio-altera.txt b/Documentation/devicetree/bindings/gpio/gpio-altera.txt index 12f5014..826a720 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-altera.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-altera.txt @@ -12,7 +12,7 @@ Required properties: - #interrupt-cells : Should be 1. The interrupt type is fixed in the hardware. - The first cell is the GPIO offset number within the GPIO controller. - interrupts: Specify the interrupt. -- altr,interrupt-trigger: Specifies the interrupt trigger type the GPIO +- altr,interrupt-type: Specifies the interrupt trigger type the GPIO hardware is synthesized. This field is required if the Altera GPIO controller used has IRQ enabled as the interrupt type is not software controlled, but hardware synthesized. Required if GPIO is used as an interrupt @@ -35,7 +35,7 @@ gpio_altr: gpio@0xff200000 { reg = <0xff200000 0x10>; interrupts = <0 45 4>; altr,ngpio = <32>; - altr,interrupt-trigger = ; + altr,interrupt-type = ; #gpio-cells = <2>; gpio-controller; #interrupt-cells = <1>; -- cgit v1.1