From eace566c3406cac3131d44198f05b7b55f79651f Mon Sep 17 00:00:00 2001 From: Chris Lew Date: Thu, 26 Oct 2017 15:28:54 -0700 Subject: dt-bindings: soc: qcom: Support GLINK intents Virtual GLINK channels may know what throughput to expect from a remoteproc. An intent advertises to the remoteproc this channel is ready to receive data. Allow a channel to define the size and amount of intents to be prequeued. Acked-by: Rob Herring Signed-off-by: Chris Lew Signed-off-by: Bjorn Andersson --- Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'Documentation/devicetree/bindings/soc') diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt index b277eca..9663cab 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt @@ -39,6 +39,14 @@ of these nodes are defined by the individual bindings for the specific function Definition: a list of channels tied to this function, used for matching the function to a set of virtual channels +- qcom,intents: + Usage: optional + Value type: + Definition: a list of size,amount pairs describing what intents should + be preallocated for this virtual channel. This can be used + to tweak the default intents available for the channel to + meet expectations of the remote. + = EXAMPLE The following example represents the GLINK RPM node on a MSM8996 device, with the function for the "rpm_request" channel defined, which is used for @@ -69,6 +77,8 @@ regualtors and root clocks. compatible = "qcom,rpm-msm8996"; qcom,glink-channels = "rpm_requests"; + qcom,intents = <0x400 5 + 0x800 1>; ... }; }; -- cgit v1.1