From 61eb3a04f9789c5e4f7498a2f171b82a567cea6b Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Mon, 5 Dec 2016 02:10:25 +0200 Subject: dt: pwm: bcm2835: fix typo in clocks property name According to the examples of BCM2835 PWM device nodes there is a typo in 'clocks' property name, which is a common property name on clock consumer side to store a phandle to an input clock. Signed-off-by: Vladimir Zapolskiy Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt') diff --git a/Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt b/Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt index fb6fb31..cf573e8 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt @@ -3,7 +3,7 @@ BCM2835 PWM controller (Raspberry Pi controller) Required properties: - compatible: should be "brcm,bcm2835-pwm" - reg: physical base address and length of the controller's registers -- clock: This clock defines the base clock frequency of the PWM hardware +- clocks: This clock defines the base clock frequency of the PWM hardware system, the period and the duty_cycle of the PWM signal is a multiple of the base period. - #pwm-cells: Should be 2. See pwm.txt in this directory for a description of -- cgit v1.1