From 6adb1b9538e6414ce746ade8d170d362a657ca41 Mon Sep 17 00:00:00 2001 From: John Keeping Date: Thu, 1 Mar 2018 10:34:47 +0000 Subject: dt-bindings: rockchip-dw-mshc: use consistent clock names The names of these clocks are "ciu-drive" and "ciu-sample" as described for the clock-names property. Avoid confusion by spelling these correctly everywhere they are referenced. Signed-off-by: John Keeping Reviewed-by: Heiko Stuebner Reviewed-by: Shawn Lin Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt') diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt index c655878..8ce49b2 100644 --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt @@ -21,7 +21,7 @@ Required Properties: - "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3399 Optional Properties: -* clocks: from common clock binding: if ciu_drive and ciu_sample are +* clocks: from common clock binding: if ciu-drive and ciu-sample are specified in clock-names, should contain handles to these clocks. * clock-names: Apart from the clock-names described in synopsys-dw-mshc.txt @@ -29,7 +29,7 @@ Optional Properties: to control the clock phases, "ciu-sample" is required for tuning high- speed modes. -* rockchip,default-sample-phase: The default phase to set ciu_sample at +* rockchip,default-sample-phase: The default phase to set ciu-sample at probing, low speeds or in case where all phases work at tuning time. If not specified 0 deg will be used. -- cgit v1.1