From 7366709c5ab72841bd6f74b0cf3fab5ca368ac23 Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Mon, 17 Apr 2017 19:57:38 +0800 Subject: dt-bindings: Make AXP20X compatible strings one per line In the binding documentation of AXP20X mfd, the compatible strings used to be listed for three per line, which leads to some mess when trying to add AXP803 compatible string (as we have already AXP806 and AXP809 compatibles, which is after AXP803 in ascending order). Make the compatible strings one per line, so that inserting a new compatible string will be directly a new line. Signed-off-by: Icenowy Zheng Signed-off-by: Lee Jones --- Documentation/devicetree/bindings/mfd/axp20x.txt | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'Documentation/devicetree/bindings/mfd') diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt index b41d260..a3e813f 100644 --- a/Documentation/devicetree/bindings/mfd/axp20x.txt +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt @@ -9,9 +9,14 @@ axp223 (X-Powers) axp809 (X-Powers) Required properties: -- compatible: "x-powers,axp152", "x-powers,axp202", "x-powers,axp209", - "x-powers,axp221", "x-powers,axp223", "x-powers,axp806", - "x-powers,axp809" +- compatible: should be one of: + * "x-powers,axp152" + * "x-powers,axp202" + * "x-powers,axp209" + * "x-powers,axp221" + * "x-powers,axp223" + * "x-powers,axp806" + * "x-powers,axp809" - reg: The I2C slave address or RSB hardware address for the AXP chip - interrupt-parent: The parent interrupt controller - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin -- cgit v1.1