From 89323f8c504a8653c66fe4a314723b36b07e29e1 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Wed, 23 Jul 2014 17:40:30 +0300 Subject: irqchip: keystone: Add irq controller ip driver On Keystone SOCs, DSP cores can send interrupts to ARM host using the IRQ controller IP. It provides 28 IRQ signals to ARM. The IRQ handler running on HOST OS can identify DSP signal source by analyzing SRCCx bits in IPCARx registers. This is one of the component used by the IPC mechanism used on Keystone SOCs. Signed-off-by: Grygorii Strashko Link: https://lkml.kernel.org/r/1406126430-9978-1-git-send-email-grygorii.strashko@ti.com Signed-off-by: Jason Cooper --- .../interrupt-controller/ti,keystone-irq.txt | 36 ++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt (limited to 'Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt') diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt new file mode 100644 index 0000000..d9bb106 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt @@ -0,0 +1,36 @@ +Keystone 2 IRQ controller IP + +On Keystone SOCs, DSP cores can send interrupts to ARM +host using the IRQ controller IP. It provides 28 IRQ signals to ARM. +The IRQ handler running on HOST OS can identify DSP signal source by +analyzing SRCCx bits in IPCARx registers. This is one of the component +used by the IPC mechanism used on Keystone SOCs. + +Required Properties: +- compatible: should be "ti,keystone-irq" +- ti,syscon-dev : phandle and offset pair. The phandle to syscon used to + access device control registers and the offset inside + device control registers range. +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode interrupt + source should be 1. +- interrupts: interrupt reference to primary interrupt controller + +Please refer to interrupts.txt in this directory for details of the common +Interrupt Controllers bindings used by client devices. + +Example: + kirq0: keystone_irq0@026202a0 { + compatible = "ti,keystone-irq"; + ti,syscon-dev = <&devctrl 0x2a0>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + }; + + dsp0: dsp0 { + compatible = "linux,rproc-user"; + ... + interrupt-parent = <&kirq0>; + interrupts = <10 2>; + }; -- cgit v1.1