From 6f29d3b2777ae32e995d45247c8234d83894b953 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 14 Oct 2015 16:44:35 -0700 Subject: Input: gpio_keys_polled - add support for abs/rel axis This changAdd support for EV_ABS / EV_REL events to the gpio-keys-polled driver. The driver already allows specifying what type of events (key / rel / abs) a button generates when pressed, but for rel / abs axis we also need to specify which value this specific gpio represents. One use case is digital joysticks / direction-pads which are hooked up to gpio, in this case we've left and right buttons which we want to map to EV_ABS, ABS_X and we want generate events for left with a value of -1 and for right with a value of +1 (and similar for up / down and ABS_Y). Signed-off-by: Hans de Goede Acked-by: Rob Herring Signed-off-by: Dmitry Torokhov --- Documentation/devicetree/bindings/input/gpio-keys-polled.txt | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree/bindings/input/gpio-keys-polled.txt') diff --git a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt index 5b91f5a..97e2467 100644 --- a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt +++ b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt @@ -13,11 +13,18 @@ Subnode properties: - gpios: OF device-tree gpio specification. - label: Descriptive name of the key. - - linux,code: Keycode to emit. + - linux,code: Key / Axis code to emit. Optional subnode-properties: - linux,input-type: Specify event type this button/key generates. If not specified defaults to <1> == EV_KEY. + - linux,input-value: If linux,input-type is EV_ABS or EV_REL then this + value is sent for events this button generates when pressed. + EV_ABS/EV_REL axis will generate an event with a value of 0 when + all buttons with linux,input-type == type and linux,code == axis + are released. This value is interpreted as a signed 32 bit value, + e.g. to make a button generate a value of -1 use: + linux,input-value = <0xffffffff>; /* -1 */ - debounce-interval: Debouncing interval time in milliseconds. If not specified defaults to 5. - wakeup-source: Boolean, button can wake-up the system. -- cgit v1.1