From 28eb27cf0839a30948335f9b2edda739f48b7a2e Mon Sep 17 00:00:00 2001 From: "Zhang, Yanmin" Date: Tue, 16 Jun 2009 13:35:11 +0800 Subject: PCI AER: support invalid error source IDs When the bus id part of error source id is equal to 0 or nosourceid=1, make the kernel probe the AER status registers of all devices under the root port to find the initial error reporter. Reviewed-by: Andrew Patterson Signed-off-by: Zhang Yanmin Signed-off-by: Jesse Barnes --- Documentation/PCI/pcieaer-howto.txt | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation/PCI') diff --git a/Documentation/PCI/pcieaer-howto.txt b/Documentation/PCI/pcieaer-howto.txt index f6b1ba7..5408b9b 100644 --- a/Documentation/PCI/pcieaer-howto.txt +++ b/Documentation/PCI/pcieaer-howto.txt @@ -61,6 +61,10 @@ be initiated although firmwares have no _OSC support. To enable the walkaround, pls. add aerdriver.forceload=y to kernel boot parameter line when booting kernel. Note that forceload=n by default. +nosourceid, another parameter of type bool, can be used when broken +hardware (mostly chipsets) has root ports that cannot obtain the reporting +source ID. nosourceid=n by default. + 2.3 AER error output When a PCI-E AER error is captured, an error message will be outputed to console. If it's a correctable error, it is outputed as a warning. -- cgit v1.1