From ec60d0ad20ff8796dc41b30a9dce485478ccd263 Mon Sep 17 00:00:00 2001 From: Pavan Savoy Date: Fri, 4 Feb 2011 02:23:10 -0600 Subject: drivers:misc: ti-st: move from rfkill to sysfs The communication between ST KIM and UIM was interfaced over the /dev/rfkill device node. Move the interface to a simpler less abusive sysfs entry mechanism and document it in Documentation/ABI/testing/ under sysfs-platform-kim. Shared transport driver would now read the UART details originally received by bootloader or firmware as platform data. The data read will be shared over sysfs entries for the user-space UIM or other n/w manager/plugins to be read, and assist the driver by opening up the UART, setting the baud-rate and installing the line discipline. Signed-off-by: Pavan Savoy Signed-off-by: Greg Kroah-Hartman --- Documentation/ABI/testing/sysfs-platform-kim | 48 ++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-platform-kim (limited to 'Documentation/ABI') diff --git a/Documentation/ABI/testing/sysfs-platform-kim b/Documentation/ABI/testing/sysfs-platform-kim new file mode 100644 index 0000000..c165327 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-kim @@ -0,0 +1,48 @@ +What: /sys/devices/platform/kim/dev_name +Date: January 2010 +KernelVersion: 2.6.38 +Contact: "Pavan Savoy" +Description: + Name of the UART device at which the WL128x chip + is connected. example: "/dev/ttyS0". + The device name flows down to architecture specific board + initialization file from the SFI/ATAGS bootloader + firmware. The name exposed is read from the user-space + dameon and opens the device when install is requested. + +What: /sys/devices/platform/kim/baud_rate +Date: January 2010 +KernelVersion: 2.6.38 +Contact: "Pavan Savoy" +Description: + The maximum reliable baud-rate the host can support. + Different platforms tend to have different high-speed + UART configurations, so the baud-rate needs to be set + locally and also sent across to the WL128x via a HCI-VS + command. The entry is read and made use by the user-space + daemon when the ldisc install is requested. + +What: /sys/devices/platform/kim/flow_cntrl +Date: January 2010 +KernelVersion: 2.6.38 +Contact: "Pavan Savoy" +Description: + The WL128x makes use of flow control mechanism, and this + entry most often should be 1, the host's UART is required + to have the capability of flow-control, or else this + entry can be made use of for exceptions. + +What: /sys/devices/platform/kim/install +Date: January 2010 +KernelVersion: 2.6.38 +Contact: "Pavan Savoy" +Description: + When one of the protocols Bluetooth, FM or GPS wants to make + use of the shared UART transport, it registers to the shared + transport driver, which will signal the user-space for opening, + configuring baud and install line discipline via this sysfs + entry. This entry would be polled upon by the user-space + daemon managing the UART, and is notified about the change + by the sysfs_notify. The value would be '1' when UART needs + to be opened/ldisc installed, and would be '0' when UART + is no more required and needs to be closed. -- cgit v1.1