From a7b4e5506d1608112a208bc5391377d2c0b6dd80 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <gl@dsa-ac.de>
Date: Thu, 8 Feb 2007 09:43:26 +0100
Subject: [ARM] 4144/1: Fix for patch #4099/1 with CONFIG_I2C_PXA_SLAVE set

Switch the i2c-pxa driver to actually using the platform device information and let it handle the power i2c bus on pxa27x too. Original version of this patch didn't compile with CONFIG_I2C_PXA_SLAVE set.

Signed-off-by: G. Liakhovetski <gl@dsa-ac.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/generic.c  |  24 +++++
 drivers/i2c/busses/i2c-pxa.c | 241 +++++++++++++++++++++++++++++--------------
 2 files changed, 188 insertions(+), 77 deletions(-)

diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 9de1278..390524c 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -338,6 +338,27 @@ static struct platform_device i2c_device = {
 	.num_resources	= ARRAY_SIZE(i2c_resources),
 };
 
+#ifdef CONFIG_PXA27x
+static struct resource i2c_power_resources[] = {
+	{
+		.start	= 0x40f00180,
+		.end	= 0x40f001a3,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_PWRI2C,
+		.end	= IRQ_PWRI2C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_power_device = {
+	.name		= "pxa2xx-i2c",
+	.id		= 1,
+	.resource	= i2c_power_resources,
+	.num_resources	= ARRAY_SIZE(i2c_resources),
+};
+#endif
+
 void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
 {
 	i2c_device.dev.platform_data = info;
@@ -392,6 +413,9 @@ static struct platform_device *devices[] __initdata = {
 	&stuart_device,
 	&pxaficp_device,
 	&i2c_device,
+#ifdef CONFIG_PXA27x
+	&i2c_power_device,
+#endif
 	&i2s_device,
 	&pxartc_device,
 };
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index c3b1567..14e83d0 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -34,6 +34,7 @@
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
+#include <asm/io.h>
 #include <asm/arch/i2c.h>
 #include <asm/arch/pxa-regs.h>
 
@@ -54,8 +55,21 @@ struct pxa_i2c {
 	unsigned int		irqlogidx;
 	u32			isrlog[32];
 	u32			icrlog[32];
+
+	void __iomem		*reg_base;
+
+	unsigned long		iobase;
+	unsigned long		iosize;
+
+	int			irq;
 };
 
+#define _IBMR(i2c)	((i2c)->reg_base + 0)
+#define _IDBR(i2c)	((i2c)->reg_base + 8)
+#define _ICR(i2c)	((i2c)->reg_base + 0x10)
+#define _ISR(i2c)	((i2c)->reg_base + 0x18)
+#define _ISAR(i2c)	((i2c)->reg_base + 0x20)
+
 /*
  * I2C Slave mode address
  */
@@ -130,7 +144,8 @@ static unsigned int i2c_debug = DEBUG;
 
 static void i2c_pxa_show_state(struct pxa_i2c *i2c, int lno, const char *fname)
 {
-	dev_dbg(&i2c->adap.dev, "state:%s:%d: ISR=%08x, ICR=%08x, IBMR=%02x\n", fname, lno, ISR, ICR, IBMR);
+	dev_dbg(&i2c->adap.dev, "state:%s:%d: ISR=%08x, ICR=%08x, IBMR=%02x\n", fname, lno,
+		readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c)));
 }
 
 #define show_state(i2c) i2c_pxa_show_state(i2c, __LINE__, __FUNCTION__)
@@ -153,7 +168,7 @@ static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why)
 	printk("i2c: msg_num: %d msg_idx: %d msg_ptr: %d\n",
 		i2c->msg_num, i2c->msg_idx, i2c->msg_ptr);
 	printk("i2c: ICR: %08x ISR: %08x\n"
-	       "i2c: log: ", ICR, ISR);
+	       "i2c: log: ", readl(_ICR(i2c)), readl(_ISR(i2c)));
 	for (i = 0; i < i2c->irqlogidx; i++)
 		printk("[%08x:%08x] ", i2c->isrlog[i], i2c->icrlog[i]);
 	printk("\n");
@@ -161,7 +176,7 @@ static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why)
 
 static inline int i2c_pxa_is_slavemode(struct pxa_i2c *i2c)
 {
-	return !(ICR & ICR_SCLE);
+	return !(readl(_ICR(i2c)) & ICR_SCLE);
 }
 
 static void i2c_pxa_abort(struct pxa_i2c *i2c)
@@ -173,28 +188,29 @@ static void i2c_pxa_abort(struct pxa_i2c *i2c)
 		return;
 	}
 
-	while (time_before(jiffies, timeout) && (IBMR & 0x1) == 0) {
-		unsigned long icr = ICR;
+	while (time_before(jiffies, timeout) && (readl(_IBMR(i2c)) & 0x1) == 0) {
+		unsigned long icr = readl(_ICR(i2c));
 
 		icr &= ~ICR_START;
 		icr |= ICR_ACKNAK | ICR_STOP | ICR_TB;
 
-		ICR = icr;
+		writel(icr, _ICR(i2c));
 
 		show_state(i2c);
 
 		msleep(1);
 	}
 
-	ICR &= ~(ICR_MA | ICR_START | ICR_STOP);
+	writel(readl(_ICR(i2c)) & ~(ICR_MA | ICR_START | ICR_STOP),
+	       _ICR(i2c));
 }
 
 static int i2c_pxa_wait_bus_not_busy(struct pxa_i2c *i2c)
 {
 	int timeout = DEF_TIMEOUT;
 
-	while (timeout-- && ISR & (ISR_IBB | ISR_UB)) {
-		if ((ISR & ISR_SAD) != 0)
+	while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) {
+		if ((readl(_ISR(i2c)) & ISR_SAD) != 0)
 			timeout += 4;
 
 		msleep(2);
@@ -214,9 +230,9 @@ static int i2c_pxa_wait_master(struct pxa_i2c *i2c)
 	while (time_before(jiffies, timeout)) {
 		if (i2c_debug > 1)
 			dev_dbg(&i2c->adap.dev, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n",
-				__func__, (long)jiffies, ISR, ICR, IBMR);
+				__func__, (long)jiffies, readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c)));
 
-		if (ISR & ISR_SAD) {
+		if (readl(_ISR(i2c)) & ISR_SAD) {
 			if (i2c_debug > 0)
 				dev_dbg(&i2c->adap.dev, "%s: Slave detected\n", __func__);
 			goto out;
@@ -226,7 +242,7 @@ static int i2c_pxa_wait_master(struct pxa_i2c *i2c)
 		 * quick check of the i2c lines themselves to ensure they've
 		 * gone high...
 		 */
-		if ((ISR & (ISR_UB | ISR_IBB)) == 0 && IBMR == 3) {
+		if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) == 0 && readl(_IBMR(i2c)) == 3) {
 			if (i2c_debug > 0)
 				dev_dbg(&i2c->adap.dev, "%s: done\n", __func__);
 			return 1;
@@ -246,7 +262,7 @@ static int i2c_pxa_set_master(struct pxa_i2c *i2c)
 	if (i2c_debug)
 		dev_dbg(&i2c->adap.dev, "setting to bus master\n");
 
-	if ((ISR & (ISR_UB | ISR_IBB)) != 0) {
+	if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) != 0) {
 		dev_dbg(&i2c->adap.dev, "%s: unit is busy\n", __func__);
 		if (!i2c_pxa_wait_master(i2c)) {
 			dev_dbg(&i2c->adap.dev, "%s: error: unit busy\n", __func__);
@@ -254,7 +270,7 @@ static int i2c_pxa_set_master(struct pxa_i2c *i2c)
 		}
 	}
 
-	ICR |= ICR_SCLE;
+	writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c));
 	return 0;
 }
 
@@ -270,11 +286,11 @@ static int i2c_pxa_wait_slave(struct pxa_i2c *i2c)
 	while (time_before(jiffies, timeout)) {
 		if (i2c_debug > 1)
 			dev_dbg(&i2c->adap.dev, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n",
-				__func__, (long)jiffies, ISR, ICR, IBMR);
+				__func__, (long)jiffies, readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c)));
 
-		if ((ISR & (ISR_UB|ISR_IBB)) == 0 ||
-		    (ISR & ISR_SAD) != 0 ||
-		    (ICR & ICR_SCLE) == 0) {
+		if ((readl(_ISR(i2c)) & (ISR_UB|ISR_IBB)) == 0 ||
+		    (readl(_ISR(i2c)) & ISR_SAD) != 0 ||
+		    (readl(_ICR(i2c)) & ICR_SCLE) == 0) {
 			if (i2c_debug > 1)
 				dev_dbg(&i2c->adap.dev, "%s: done\n", __func__);
 			return 1;
@@ -302,9 +318,9 @@ static void i2c_pxa_set_slave(struct pxa_i2c *i2c, int errcode)
 		/* we need to wait for the stop condition to end */
 
 		/* if we where in stop, then clear... */
-		if (ICR & ICR_STOP) {
+		if (readl(_ICR(i2c)) & ICR_STOP) {
 			udelay(100);
-			ICR &= ~ICR_STOP;
+			writel(readl(_ICR(i2c)) & ~ICR_STOP, _ICR(i2c));
 		}
 
 		if (!i2c_pxa_wait_slave(i2c)) {
@@ -314,12 +330,12 @@ static void i2c_pxa_set_slave(struct pxa_i2c *i2c, int errcode)
 		}
 	}
 
-	ICR &= ~(ICR_STOP|ICR_ACKNAK|ICR_MA);
-	ICR &= ~ICR_SCLE;
+	writel(readl(_ICR(i2c)) & ~(ICR_STOP|ICR_ACKNAK|ICR_MA), _ICR(i2c));
+	writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c));
 
 	if (i2c_debug) {
-		dev_dbg(&i2c->adap.dev, "ICR now %08x, ISR %08x\n", ICR, ISR);
-		decode_ICR(ICR);
+		dev_dbg(&i2c->adap.dev, "ICR now %08x, ISR %08x\n", readl(_ICR(i2c)), readl(_ISR(i2c)));
+		decode_ICR(readl(_ICR(i2c)));
 	}
 }
 #else
@@ -334,24 +350,24 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c)
 	i2c_pxa_abort(i2c);
 
 	/* reset according to 9.8 */
-	ICR = ICR_UR;
-	ISR = I2C_ISR_INIT;
-	ICR &= ~ICR_UR;
+	writel(ICR_UR, _ICR(i2c));
+	writel(I2C_ISR_INIT, _ISR(i2c));
+	writel(readl(_ICR(i2c)) & ~ICR_UR, _ICR(i2c));
 
-	ISAR = i2c->slave_addr;
+	writel(i2c->slave_addr, _ISAR(i2c));
 
 	/* set control register values */
-	ICR = I2C_ICR_INIT;
+	writel(I2C_ICR_INIT, _ICR(i2c));
 
 #ifdef CONFIG_I2C_PXA_SLAVE
 	dev_info(&i2c->adap.dev, "Enabling slave mode\n");
-	ICR |= ICR_SADIE | ICR_ALDIE | ICR_SSDIE;
+	writel(readl(_ICR(i2c)) | ICR_SADIE | ICR_ALDIE | ICR_SSDIE, _ICR(i2c));
 #endif
 
 	i2c_pxa_set_slave(i2c, 0);
 
 	/* enable unit */
-	ICR |= ICR_IUE;
+	writel(readl(_ICR(i2c)) | ICR_IUE, _ICR(i2c));
 	udelay(100);
 }
 
@@ -371,19 +387,19 @@ static void i2c_pxa_slave_txempty(struct pxa_i2c *i2c, u32 isr)
 		if (i2c->slave != NULL)
 			ret = i2c->slave->read(i2c->slave->data);
 
-		IDBR = ret;
-		ICR |= ICR_TB;   /* allow next byte */
+		writel(ret, _IDBR(i2c));
+		writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c));   /* allow next byte */
 	}
 }
 
 static void i2c_pxa_slave_rxfull(struct pxa_i2c *i2c, u32 isr)
 {
-	unsigned int byte = IDBR;
+	unsigned int byte = readl(_IDBR(i2c));
 
 	if (i2c->slave != NULL)
 		i2c->slave->write(i2c->slave->data, byte);
 
-	ICR |= ICR_TB;
+	writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c));
 }
 
 static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr)
@@ -403,13 +419,13 @@ static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr)
 	 * start condition... if this happens, we'd better back off
 	 * and stop holding the poor thing up
 	 */
-	ICR &= ~(ICR_START|ICR_STOP);
-	ICR |= ICR_TB;
+	writel(readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP), _ICR(i2c));
+	writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c));
 
 	timeout = 0x10000;
 
 	while (1) {
-		if ((IBMR & 2) == 2)
+		if ((readl(_IBMR(i2c)) & 2) == 2)
 			break;
 
 		timeout--;
@@ -420,7 +436,7 @@ static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr)
 		}
 	}
 
-	ICR &= ~ICR_SCLE;
+	writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c));
 }
 
 static void i2c_pxa_slave_stop(struct pxa_i2c *i2c)
@@ -447,14 +463,14 @@ static void i2c_pxa_slave_txempty(struct pxa_i2c *i2c, u32 isr)
 	if (isr & ISR_BED) {
 		/* what should we do here? */
 	} else {
-		IDBR = 0;
-		ICR |= ICR_TB;
+		writel(0, _IDBR(i2c));
+		writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c));
 	}
 }
 
 static void i2c_pxa_slave_rxfull(struct pxa_i2c *i2c, u32 isr)
 {
-	ICR |= ICR_TB | ICR_ACKNAK;
+	writel(readl(_ICR(i2c)) | ICR_TB | ICR_ACKNAK, _ICR(i2c));
 }
 
 static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr)
@@ -466,13 +482,13 @@ static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr)
 	 * start condition... if this happens, we'd better back off
 	 * and stop holding the poor thing up
 	 */
-	ICR &= ~(ICR_START|ICR_STOP);
-	ICR |= ICR_TB | ICR_ACKNAK;
+	writel(readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP), _ICR(i2c));
+	writel(readl(_ICR(i2c)) | ICR_TB | ICR_ACKNAK, _ICR(i2c));
 
 	timeout = 0x10000;
 
 	while (1) {
-		if ((IBMR & 2) == 2)
+		if ((readl(_IBMR(i2c)) & 2) == 2)
 			break;
 
 		timeout--;
@@ -483,7 +499,7 @@ static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr)
 		}
 	}
 
-	ICR &= ~ICR_SCLE;
+	writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c));
 }
 
 static void i2c_pxa_slave_stop(struct pxa_i2c *i2c)
@@ -514,13 +530,13 @@ static inline void i2c_pxa_start_message(struct pxa_i2c *i2c)
 	/*
 	 * Step 1: target slave address into IDBR
 	 */
-	IDBR = i2c_pxa_addr_byte(i2c->msg);
+	writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c));
 
 	/*
 	 * Step 2: initiate the write.
 	 */
-	icr = ICR & ~(ICR_STOP | ICR_ALDIE);
-	ICR = icr | ICR_START | ICR_TB;
+	icr = readl(_ICR(i2c)) & ~(ICR_STOP | ICR_ALDIE);
+	writel(icr | ICR_START | ICR_TB, _ICR(i2c));
 }
 
 /*
@@ -594,7 +610,7 @@ static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret)
 
 static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr)
 {
-	u32 icr = ICR & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB);
+	u32 icr = readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB);
 
  again:
 	/*
@@ -645,7 +661,7 @@ static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr)
 		/*
 		 * Write mode.  Write the next data byte.
 		 */
-		IDBR = i2c->msg->buf[i2c->msg_ptr++];
+		writel(i2c->msg->buf[i2c->msg_ptr++], _IDBR(i2c));
 
 		icr |= ICR_ALDIE | ICR_TB;
 
@@ -675,7 +691,7 @@ static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr)
 		/*
 		 * Write the next address.
 		 */
-		IDBR = i2c_pxa_addr_byte(i2c->msg);
+		writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c));
 
 		/*
 		 * And trigger a repeated start, and send the byte.
@@ -696,18 +712,18 @@ static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr)
 
 	i2c->icrlog[i2c->irqlogidx-1] = icr;
 
-	ICR = icr;
+	writel(icr, _ICR(i2c));
 	show_state(i2c);
 }
 
 static void i2c_pxa_irq_rxfull(struct pxa_i2c *i2c, u32 isr)
 {
-	u32 icr = ICR & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB);
+	u32 icr = readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB);
 
 	/*
 	 * Read the byte.
 	 */
-	i2c->msg->buf[i2c->msg_ptr++] = IDBR;
+	i2c->msg->buf[i2c->msg_ptr++] = readl(_IDBR(i2c));
 
 	if (i2c->msg_ptr < i2c->msg->len) {
 		/*
@@ -724,17 +740,17 @@ static void i2c_pxa_irq_rxfull(struct pxa_i2c *i2c, u32 isr)
 
 	i2c->icrlog[i2c->irqlogidx-1] = icr;
 
-	ICR = icr;
+	writel(icr, _ICR(i2c));
 }
 
 static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id)
 {
 	struct pxa_i2c *i2c = dev_id;
-	u32 isr = ISR;
+	u32 isr = readl(_ISR(i2c));
 
 	if (i2c_debug > 2 && 0) {
 		dev_dbg(&i2c->adap.dev, "%s: ISR=%08x, ICR=%08x, IBMR=%02x\n",
-			__func__, isr, ICR, IBMR);
+			__func__, isr, readl(_ICR(i2c)), readl(_IBMR(i2c)));
 		decode_ISR(isr);
 	}
 
@@ -746,7 +762,7 @@ static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id)
 	/*
 	 * Always clear all pending IRQs.
 	 */
-	ISR = isr & (ISR_SSD|ISR_ALD|ISR_ITE|ISR_IRF|ISR_SAD|ISR_BED);
+	writel(isr & (ISR_SSD|ISR_ALD|ISR_ITE|ISR_IRF|ISR_SAD|ISR_BED), _ISR(i2c));
 
 	if (isr & ISR_SAD)
 		i2c_pxa_slave_start(i2c, isr);
@@ -779,7 +795,7 @@ static int i2c_pxa_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num
 	/* If the I2C controller is disabled we need to reset it (probably due
  	   to a suspend/resume destroying state). We do this here as we can then
  	   avoid worrying about resuming the controller before its users. */
-	if (!(ICR & ICR_IUE))
+	if (!(readl(_ICR(i2c)) & ICR_IUE))
 		i2c_pxa_reset(i2c);
 
 	for (i = adap->retries; i >= 0; i--) {
@@ -810,28 +826,53 @@ static const struct i2c_algorithm i2c_pxa_algorithm = {
 
 static struct pxa_i2c i2c_pxa = {
 	.lock	= SPIN_LOCK_UNLOCKED,
-	.wait	= __WAIT_QUEUE_HEAD_INITIALIZER(i2c_pxa.wait),
 	.adap	= {
 		.owner		= THIS_MODULE,
 		.algo		= &i2c_pxa_algorithm,
-		.name		= "pxa2xx-i2c",
+		.name		= "pxa2xx-i2c.0",
 		.retries	= 5,
 	},
 };
 
+#define res_len(r)		((r)->end - (r)->start + 1)
 static int i2c_pxa_probe(struct platform_device *dev)
 {
 	struct pxa_i2c *i2c = &i2c_pxa;
+	struct resource *res;
 #ifdef CONFIG_I2C_PXA_SLAVE
 	struct i2c_pxa_platform_data *plat = dev->dev.platform_data;
 #endif
 	int ret;
+	int irq;
 
-#ifdef CONFIG_PXA27x
-	pxa_gpio_mode(GPIO117_I2CSCL_MD);
-	pxa_gpio_mode(GPIO118_I2CSDA_MD);
-	udelay(100);
-#endif
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	irq = platform_get_irq(dev, 0);
+	if (res == NULL || irq < 0)
+		return -ENODEV;
+
+	if (!request_mem_region(res->start, res_len(res), res->name))
+		return -ENOMEM;
+
+	i2c = kmalloc(sizeof(struct pxa_i2c), GFP_KERNEL);
+	if (!i2c) {
+		ret = -ENOMEM;
+		goto emalloc;
+	}
+
+	memcpy(i2c, &i2c_pxa, sizeof(struct pxa_i2c));
+	init_waitqueue_head(&i2c->wait);
+	i2c->adap.name[strlen(i2c->adap.name) - 1] = '0' + dev->id % 10;
+
+	i2c->reg_base = ioremap(res->start, res_len(res));
+	if (!i2c->reg_base) {
+		ret = -EIO;
+		goto eremap;
+	}
+
+	i2c->iobase = res->start;
+	i2c->iosize = res_len(res);
+
+	i2c->irq = irq;
 
 	i2c->slave_addr = I2C_PXA_SLAVE_ADDR;
 
@@ -842,11 +883,28 @@ static int i2c_pxa_probe(struct platform_device *dev)
 	}
 #endif
 
-	pxa_set_cken(CKEN14_I2C, 1);
-	ret = request_irq(IRQ_I2C, i2c_pxa_handler, IRQF_DISABLED,
-			  "pxa2xx-i2c", i2c);
+	switch (dev->id) {
+	case 0:
+#ifdef CONFIG_PXA27x
+		pxa_gpio_mode(GPIO117_I2CSCL_MD);
+		pxa_gpio_mode(GPIO118_I2CSDA_MD);
+#endif
+		pxa_set_cken(CKEN14_I2C, 1);
+		break;
+#ifdef CONFIG_PXA27x
+	case 1:
+		local_irq_disable();
+		PCFR |= PCFR_PI2CEN;
+		local_irq_enable();
+		pxa_set_cken(CKEN15_PWRI2C, 1);
+#endif
+	}
+
+	ret = request_irq(irq, i2c_pxa_handler, IRQF_DISABLED,
+			  i2c->adap.name, i2c);
 	if (ret)
-		goto out;
+		goto ereqirq;
+
 
 	i2c_pxa_reset(i2c);
 
@@ -856,7 +914,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
 	ret = i2c_add_adapter(&i2c->adap);
 	if (ret < 0) {
 		printk(KERN_INFO "I2C: Failed to add bus\n");
-		goto err_irq;
+		goto eadapt;
 	}
 
 	platform_set_drvdata(dev, i2c);
@@ -870,9 +928,25 @@ static int i2c_pxa_probe(struct platform_device *dev)
 #endif
 	return 0;
 
- err_irq:
-	free_irq(IRQ_I2C, i2c);
- out:
+eadapt:
+	free_irq(irq, i2c);
+ereqirq:
+	switch (dev->id) {
+	case 0:
+		pxa_set_cken(CKEN14_I2C, 0);
+		break;
+#ifdef CONFIG_PXA27x
+	case 1:
+		pxa_set_cken(CKEN15_PWRI2C, 0);
+		local_irq_disable();
+		PCFR &= ~PCFR_PI2CEN;
+		local_irq_enable();
+#endif
+	}
+eremap:
+	kfree(i2c);
+emalloc:
+	release_mem_region(res->start, res_len(res));
 	return ret;
 }
 
@@ -883,8 +957,21 @@ static int i2c_pxa_remove(struct platform_device *dev)
 	platform_set_drvdata(dev, NULL);
 
 	i2c_del_adapter(&i2c->adap);
-	free_irq(IRQ_I2C, i2c);
-	pxa_set_cken(CKEN14_I2C, 0);
+	free_irq(i2c->irq, i2c);
+	switch (dev->id) {
+	case 0:
+		pxa_set_cken(CKEN14_I2C, 0);
+		break;
+#ifdef CONFIG_PXA27x
+	case 1:
+		pxa_set_cken(CKEN15_PWRI2C, 0);
+		local_irq_disable();
+		PCFR &= ~PCFR_PI2CEN;
+		local_irq_enable();
+#endif
+	}
+	release_mem_region(i2c->iobase, i2c->iosize);
+	kfree(i2c);
 
 	return 0;
 }
-- 
cgit v1.1


From 45cf5eef4fa8bcd8d3aca3c2a0703d791c9ea56c Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Mon, 5 Feb 2007 22:37:07 +0100
Subject: [ARM] 4136/1: Allow PXA2xx's clock source to be used

Commit c80204e5d67d1452ac0b761d980f1651dc2c66dc apparently missed this.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6783c2e..f7fa24b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -280,6 +280,7 @@ config ARCH_PXA
 	bool "PXA2xx-based"
 	depends on MMU
 	select ARCH_MTD_XIP
+	select GENERIC_TIME
 	help
 	  Support for Intel's PXA2XX processor line.
 
-- 
cgit v1.1


From 51dd249eff28924f838a72a50c417b2089e0f6a9 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Sun, 4 Feb 2007 22:45:33 +0100
Subject: [ARM] 4120/1: ep93xx: make clock init an arch_initcall()

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/clock.c           | 6 +++++-
 arch/arm/mach-ep93xx/core.c            | 2 --
 include/asm-arm/arch-ep93xx/platform.h | 1 -
 3 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 08ad782..f174d1a 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/clk.h>
 #include <linux/err.h>
+#include <linux/module.h>
 #include <linux/string.h>
 #include <asm/div64.h>
 #include <asm/hardware.h>
@@ -124,7 +125,7 @@ static unsigned long calc_pll_rate(u32 config_word)
 	return (unsigned long)rate;
 }
 
-void ep93xx_clock_init(void)
+static int __init ep93xx_clock_init(void)
 {
 	u32 value;
 
@@ -153,4 +154,7 @@ void ep93xx_clock_init(void)
 	printk(KERN_INFO "ep93xx: FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
 		clk_f.rate / 1000000, clk_h.rate / 1000000,
 		clk_p.rate / 1000000);
+
+	return 0;
 }
+arch_initcall(ep93xx_clock_init);
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 6b26346..913ea43 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -461,8 +461,6 @@ void __init ep93xx_init_devices(void)
 {
 	unsigned int v;
 
-	ep93xx_clock_init();
-
 	/*
 	 * Disallow access to MaverickCrunch initially.
 	 */
diff --git a/include/asm-arm/arch-ep93xx/platform.h b/include/asm-arm/arch-ep93xx/platform.h
index b4a8deb8..44eccec 100644
--- a/include/asm-arm/arch-ep93xx/platform.h
+++ b/include/asm-arm/arch-ep93xx/platform.h
@@ -8,7 +8,6 @@ void ep93xx_map_io(void);
 void ep93xx_init_irq(void);
 void ep93xx_init_time(unsigned long);
 void ep93xx_init_devices(void);
-void ep93xx_clock_init(void);
 extern struct sys_timer ep93xx_timer;
 
 struct ep93xx_eth_data
-- 
cgit v1.1


From fac105d05e4b410c586de55dfbf34f40a95f6977 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 5 Feb 2007 00:35:37 +0100
Subject: [ARM] 4121/1: ep93xx: move setting of HWCAP_CRUNCH

Move the setting of HWCAP_CRUNCH to kernel/crunch.c, where it belongs.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/crunch.c    | 1 +
 arch/arm/mach-ep93xx/core.c | 4 ----
 2 files changed, 1 insertion(+), 4 deletions(-)

diff --git a/arch/arm/kernel/crunch.c b/arch/arm/kernel/crunch.c
index cec8378..627d794 100644
--- a/arch/arm/kernel/crunch.c
+++ b/arch/arm/kernel/crunch.c
@@ -75,6 +75,7 @@ static struct notifier_block crunch_notifier_block = {
 static int __init crunch_init(void)
 {
 	thread_register_notifier(&crunch_notifier_block);
+	elf_hwcap |= HWCAP_CRUNCH;
 
 	return 0;
 }
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 913ea43..5d2739a 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -475,8 +475,4 @@ void __init ep93xx_init_devices(void)
 
 	platform_device_register(&ep93xx_rtc_device);
 	platform_device_register(&ep93xx_ohci_device);
-
-#ifdef CONFIG_CRUNCH
-	elf_hwcap |= HWCAP_CRUNCH;
-#endif
 }
-- 
cgit v1.1


From 4932e397be71370b95f555f87d3b424d2b5ca57b Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 5 Feb 2007 00:38:48 +0100
Subject: [ARM] 4122/1: ep93xx: add support for GPIO port F interrupts

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/core.c               | 90 +++++++++++++++++++++----------
 include/asm-arm/arch-ep93xx/ep93xx-regs.h |  5 ++
 include/asm-arm/arch-ep93xx/irqs.h        |  8 ++-
 3 files changed, 73 insertions(+), 30 deletions(-)

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 5d2739a..94bba0b 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -152,22 +152,29 @@ struct sys_timer ep93xx_timer = {
 /*************************************************************************
  * GPIO handling for EP93xx
  *************************************************************************/
-static unsigned char gpio_int_enable[2];
-static unsigned char gpio_int_type1[2];
-static unsigned char gpio_int_type2[2];
+static unsigned char gpio_int_enable[3];
+static unsigned char gpio_int_type1[3];
+static unsigned char gpio_int_type2[3];
 
-static void update_gpio_ab_int_params(int port)
+static void update_gpio_int_params(int abf)
 {
-	if (port == 0) {
+	if (abf == 0) {
 		__raw_writeb(0, EP93XX_GPIO_A_INT_ENABLE);
 		__raw_writeb(gpio_int_type2[0], EP93XX_GPIO_A_INT_TYPE2);
 		__raw_writeb(gpio_int_type1[0], EP93XX_GPIO_A_INT_TYPE1);
 		__raw_writeb(gpio_int_enable[0], EP93XX_GPIO_A_INT_ENABLE);
-	} else if (port == 1) {
+	} else if (abf == 1) {
 		__raw_writeb(0, EP93XX_GPIO_B_INT_ENABLE);
 		__raw_writeb(gpio_int_type2[1], EP93XX_GPIO_B_INT_TYPE2);
 		__raw_writeb(gpio_int_type1[1], EP93XX_GPIO_B_INT_TYPE1);
 		__raw_writeb(gpio_int_enable[1], EP93XX_GPIO_B_INT_ENABLE);
+	} else if (abf == 2) {
+		__raw_writeb(0, EP93XX_GPIO_F_INT_ENABLE);
+		__raw_writeb(gpio_int_type2[2], EP93XX_GPIO_F_INT_TYPE2);
+		__raw_writeb(gpio_int_type1[2], EP93XX_GPIO_F_INT_TYPE1);
+		__raw_writeb(gpio_int_enable[2], EP93XX_GPIO_F_INT_ENABLE);
+	} else {
+		BUG();
 	}
 }
 
@@ -192,8 +199,13 @@ void gpio_line_config(int line, int direction)
 	local_irq_save(flags);
 	if (direction == GPIO_OUT) {
 		if (line >= 0 && line < 16) {
+			/* Port A/B.  */
 			gpio_int_enable[line >> 3] &= ~(1 << (line & 7));
-			update_gpio_ab_int_params(line >> 3);
+			update_gpio_int_params(line >> 3);
+		} else if (line >= 40 && line < 48) {
+			/* Port F.  */
+			gpio_int_enable[2] &= ~(1 << (line & 7));
+			update_gpio_int_params(2);
 		}
 
 		v = __raw_readb(data_direction_register);
@@ -244,8 +256,7 @@ EXPORT_SYMBOL(gpio_line_set);
 /*************************************************************************
  * EP93xx IRQ handling
  *************************************************************************/
-static void ep93xx_gpio_ab_irq_handler(unsigned int irq,
-		struct irq_desc *desc)
+static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned char status;
 	int i;
@@ -267,37 +278,46 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq,
 	}
 }
 
-static void ep93xx_gpio_ab_irq_mask_ack(unsigned int irq)
+static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	int gpio_irq = IRQ_EP93XX_GPIO(16) + (((irq + 1) & 7) ^ 4);
+
+	desc_handle_irq(gpio_irq, irq_desc + gpio_irq);
+}
+
+static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
 {
 	int line = irq - IRQ_EP93XX_GPIO(0);
 	int port = line >> 3;
 
 	gpio_int_enable[port] &= ~(1 << (line & 7));
-	update_gpio_ab_int_params(port);
+	update_gpio_int_params(port);
 
-	if (line >> 3) {
-		__raw_writel(1 << (line & 7), EP93XX_GPIO_B_INT_ACK);
-	} else {
+	if (port == 0) {
 		__raw_writel(1 << (line & 7), EP93XX_GPIO_A_INT_ACK);
+	} else if (port == 1) {
+		__raw_writel(1 << (line & 7), EP93XX_GPIO_B_INT_ACK);
+	} else if (port == 2) {
+		__raw_writel(1 << (line & 7), EP93XX_GPIO_F_INT_ACK);
 	}
 }
 
-static void ep93xx_gpio_ab_irq_mask(unsigned int irq)
+static void ep93xx_gpio_irq_mask(unsigned int irq)
 {
 	int line = irq - IRQ_EP93XX_GPIO(0);
 	int port = line >> 3;
 
 	gpio_int_enable[port] &= ~(1 << (line & 7));
-	update_gpio_ab_int_params(port);
+	update_gpio_int_params(port);
 }
 
-static void ep93xx_gpio_ab_irq_unmask(unsigned int irq)
+static void ep93xx_gpio_irq_unmask(unsigned int irq)
 {
 	int line = irq - IRQ_EP93XX_GPIO(0);
 	int port = line >> 3;
 
 	gpio_int_enable[port] |= 1 << (line & 7);
-	update_gpio_ab_int_params(port);
+	update_gpio_int_params(port);
 }
 
 
@@ -306,13 +326,17 @@ static void ep93xx_gpio_ab_irq_unmask(unsigned int irq)
  * edge (1) triggered, while gpio_int_type2 controls whether it
  * triggers on low/falling (0) or high/rising (1).
  */
-static int ep93xx_gpio_ab_irq_type(unsigned int irq, unsigned int type)
+static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
 {
 	int port;
 	int line;
 
 	line = irq - IRQ_EP93XX_GPIO(0);
-	gpio_line_config(line, GPIO_IN);
+	if (line >= 0 && line < 16) {
+		gpio_line_config(line, GPIO_IN);
+	} else {
+		gpio_line_config(EP93XX_GPIO_LINE_F(line), GPIO_IN);
+	}
 
 	port = line >> 3;
 	line &= 7;
@@ -330,16 +354,17 @@ static int ep93xx_gpio_ab_irq_type(unsigned int irq, unsigned int type)
 		gpio_int_type1[port] &= ~(1 << line);
 		gpio_int_type2[port] &= ~(1 << line);
 	}
-	update_gpio_ab_int_params(port);
+	update_gpio_int_params(port);
 
 	return 0;
 }
 
-static struct irq_chip ep93xx_gpio_ab_irq_chip = {
-	.ack		= ep93xx_gpio_ab_irq_mask_ack,
-	.mask		= ep93xx_gpio_ab_irq_mask,
-	.unmask		= ep93xx_gpio_ab_irq_unmask,
-	.set_type	= ep93xx_gpio_ab_irq_type,
+static struct irq_chip ep93xx_gpio_irq_chip = {
+	.name		= "GPIO",
+	.ack		= ep93xx_gpio_irq_mask_ack,
+	.mask		= ep93xx_gpio_irq_mask,
+	.unmask		= ep93xx_gpio_irq_unmask,
+	.set_type	= ep93xx_gpio_irq_type,
 };
 
 
@@ -350,12 +375,21 @@ void __init ep93xx_init_irq(void)
 	vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK);
 	vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK);
 
-	for (irq = IRQ_EP93XX_GPIO(0) ; irq <= IRQ_EP93XX_GPIO(15); irq++) {
-		set_irq_chip(irq, &ep93xx_gpio_ab_irq_chip);
+	for (irq = IRQ_EP93XX_GPIO(0); irq <= IRQ_EP93XX_GPIO(23); irq++) {
+		set_irq_chip(irq, &ep93xx_gpio_irq_chip);
 		set_irq_handler(irq, handle_level_irq);
 		set_irq_flags(irq, IRQF_VALID);
 	}
+
 	set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO0MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO1MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO2MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO3MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO4MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO5MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO6MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO7MUX, ep93xx_gpio_f_irq_handler);
 }
 
 
diff --git a/include/asm-arm/arch-ep93xx/ep93xx-regs.h b/include/asm-arm/arch-ep93xx/ep93xx-regs.h
index 593f562..625c6f0 100644
--- a/include/asm-arm/arch-ep93xx/ep93xx-regs.h
+++ b/include/asm-arm/arch-ep93xx/ep93xx-regs.h
@@ -73,6 +73,11 @@
 
 #define EP93XX_GPIO_BASE		(EP93XX_APB_VIRT_BASE + 0x00040000)
 #define EP93XX_GPIO_REG(x)		(EP93XX_GPIO_BASE + (x))
+#define EP93XX_GPIO_F_INT_TYPE1		EP93XX_GPIO_REG(0x4c)
+#define EP93XX_GPIO_F_INT_TYPE2		EP93XX_GPIO_REG(0x50)
+#define EP93XX_GPIO_F_INT_ACK		EP93XX_GPIO_REG(0x54)
+#define EP93XX_GPIO_F_INT_ENABLE	EP93XX_GPIO_REG(0x58)
+#define EP93XX_GPIO_F_INT_STATUS	EP93XX_GPIO_REG(0x5c)
 #define EP93XX_GPIO_A_INT_TYPE1		EP93XX_GPIO_REG(0x90)
 #define EP93XX_GPIO_A_INT_TYPE2		EP93XX_GPIO_REG(0x94)
 #define EP93XX_GPIO_A_INT_ACK		EP93XX_GPIO_REG(0x98)
diff --git a/include/asm-arm/arch-ep93xx/irqs.h b/include/asm-arm/arch-ep93xx/irqs.h
index ae532e304..2a8c636 100644
--- a/include/asm-arm/arch-ep93xx/irqs.h
+++ b/include/asm-arm/arch-ep93xx/irqs.h
@@ -67,9 +67,13 @@
 #define IRQ_EP93XX_SAI			60
 #define EP93XX_VIC2_VALID_IRQ_MASK	0x1fffffff
 
-#define IRQ_EP93XX_GPIO(x)		(64 + (x))
+/*
+ * Map GPIO A0..A7 to irq 64..71, B0..B7 to 72..79, and
+ * F0..F7 to 80..87.
+ */
+#define IRQ_EP93XX_GPIO(x)		(64 + (((x) + (((x) >> 2) & 8)) & 0x1f))
 
-#define NR_EP93XX_IRQS			IRQ_EP93XX_GPIO(16)
+#define NR_EP93XX_IRQS			(64 + 24)
 
 #define EP93XX_BOARD_IRQ(x)		(NR_EP93XX_IRQS + (x))
 #define EP93XX_BOARD_IRQS		32
-- 
cgit v1.1


From 850b42933e70c19c7765dd7fad15cb7ad3955b65 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 5 Feb 2007 00:55:27 +0100
Subject: [ARM] 4123/1: xsc3: general cleanup

This patch cleans up proc-xsc3:
- Correct a number of typos.
- Fix up indentation in a number of places.
- Change references to the various caches to be more clear about
  whether we're talking about the L1 D, the L1 I or the unified L2
  cache.
- Rename "drain write buffer" to "data write barrier", the official
  name used in the Manzano manual.
- Change the xsc3 cpu name from "XScale-Core3" to "XScale-V3 based
  processor".

Also, since a previously merged patch implements proper support for
using a MAC or iWMMXt coprocessor on xsc3 platforms, we no longer
need to enable access to CP0 on boot.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/proc-xsc3.S | 151 ++++++++++++++++++++++++------------------------
 1 file changed, 75 insertions(+), 76 deletions(-)

diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 94a5845..d95921a 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -5,23 +5,23 @@
  * Current Maintainer: Lennert Buytenhek <buytenh@wantstofly.org>
  *
  * Copyright 2004 (C) Intel Corp.
- * Copyright 2005 (c) MontaVista Software, Inc.
+ * Copyright 2005 (C) MontaVista Software, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * MMU functions for the Intel XScale3 Core (XSC3).  The XSC3 core is an
- * extension to Intel's original XScale core that adds the following
+ * MMU functions for the Intel XScale3 Core (XSC3).  The XSC3 core is
+ * an extension to Intel's original XScale core that adds the following
  * features:
  *
  * - ARMv6 Supersections
  * - Low Locality Reference pages (replaces mini-cache)
  * - 36-bit addressing
  * - L2 cache
- * - Cache-coherency if chipset supports it
+ * - Cache coherency if chipset supports it
  *
- * Based on orignal XScale code by Nicolas Pitre
+ * Based on original XScale code by Nicolas Pitre.
  */
 
 #include <linux/linkage.h>
@@ -42,12 +42,12 @@
 #define MAX_AREA_SIZE	32768
 
 /*
- * The cache line size of the I and D cache.
+ * The cache line size of the L1 I, L1 D and unified L2 cache.
  */
 #define CACHELINESIZE	32
 
 /*
- * The size of the data cache.
+ * The size of the L1 D cache.
  */
 #define CACHESIZE	32768
 
@@ -57,9 +57,9 @@
 #define L2_CACHE_ENABLE	1
 
 /*
- * This macro is used to wait for a CP15 write and is needed
- * when we have to ensure that the last operation to the co-pro
- * was completed before continuing with operation.
+ * This macro is used to wait for a CP15 write and is needed when we
+ * have to ensure that the last operation to the coprocessor was
+ * completed before continuing with operation.
  */
 	.macro	cpwait_ret, lr, rd
 	mrc	p15, 0, \rd, c2, c0, 0		@ arbitrary read of cp15
@@ -68,13 +68,13 @@
 	.endm
 
 /*
- * This macro cleans & invalidates the entire xsc3 dcache by set & way.
+ * This macro cleans and invalidates the entire L1 D cache.
  */
 
  	.macro  clean_d_cache rd, rs
 	mov	\rd, #0x1f00
 	orr	\rd, \rd, #0x00e0
-1:	mcr	p15, 0, \rd, c7, c14, 2		@ clean/inv set/way
+1:	mcr	p15, 0, \rd, c7, c14, 2		@ clean/invalidate L1 D line
 	adds	\rd, \rd, #0x40000000
 	bcc	1b
 	subs	\rd, \rd, #0x20
@@ -119,15 +119,15 @@ ENTRY(cpu_xsc3_reset)
 	mov	r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
 	msr	cpsr_c, r1			@ reset CPSR
 	mrc	p15, 0, r1, c1, c0, 0		@ ctrl register
-	bic	r1, r1, #0x0086			@ ........B....CA.
 	bic	r1, r1, #0x3900			@ ..VIZ..S........
+	bic	r1, r1, #0x0086			@ ........B....CA.
 	mcr	p15, 0, r1, c1, c0, 0		@ ctrl register
-	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches & BTB
+	mcr	p15, 0, ip, c7, c7, 0		@ invalidate L1 caches and BTB
 	bic	r1, r1, #0x0001			@ ...............M
 	mcr	p15, 0, r1, c1, c0, 0		@ ctrl register
 	@ CAUTION: MMU turned off from this point.  We count on the pipeline
 	@ already containing those two last instructions to survive.
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I and D TLBs
 	mov	pc, r0
 
 /*
@@ -139,14 +139,12 @@ ENTRY(cpu_xsc3_reset)
  *
  * XScale supports clock switching, but using idle mode support
  * allows external hardware to react to system state changes.
-
- MMG: Come back to this one.
  */
 	.align	5
 
 ENTRY(cpu_xsc3_do_idle)
 	mov	r0, #1
-	mcr	p14, 0, r0, c7, c0, 0		@ Go to IDLE
+	mcr	p14, 0, r0, c7, c0, 0		@ go to idle
 	mov	pc, lr
 
 /* ================================= CACHE ================================ */
@@ -171,9 +169,9 @@ ENTRY(xsc3_flush_kern_cache_all)
 __flush_whole_cache:
 	clean_d_cache r0, r1
 	tst	r2, #VM_EXEC
-	mcrne	p15, 0, ip, c7, c5, 0		@ Invalidate I cache & BTB
-	mcrne	p15, 0, ip, c7, c10, 4		@ Drain Write Buffer
-	mcrne	p15, 0, ip, c7, c5, 4		@ Prefetch Flush
+	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate L1 I cache and BTB
+	mcrne	p15, 0, ip, c7, c10, 4		@ data write barrier
+	mcrne	p15, 0, ip, c7, c5, 4		@ prefetch flush
 	mov	pc, lr
 
 /*
@@ -194,21 +192,21 @@ ENTRY(xsc3_flush_user_cache_range)
 	bhs	__flush_whole_cache
 
 1:	tst	r2, #VM_EXEC
-	mcrne	p15, 0, r0, c7, c5, 1		@ Invalidate I cache line
-	mcr	p15, 0, r0, c7, c14, 1		@ Clean/invalidate D cache line
+	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate L1 I line
+	mcr	p15, 0, r0, c7, c14, 1		@ clean/invalidate L1 D line
 	add	r0, r0, #CACHELINESIZE
 	cmp	r0, r1
 	blo	1b
 	tst	r2, #VM_EXEC
-	mcrne	p15, 0, ip, c7, c5, 6		@ Invalidate BTB
-	mcrne	p15, 0, ip, c7, c10, 4		@ Drain Write Buffer
-	mcrne	p15, 0, ip, c7, c5, 4		@ Prefetch Flush
+	mcrne	p15, 0, ip, c7, c5, 6		@ invalidate BTB
+	mcrne	p15, 0, ip, c7, c10, 4		@ data write barrier
+	mcrne	p15, 0, ip, c7, c5, 4		@ prefetch flush
 	mov	pc, lr
 
 /*
  *	coherent_kern_range(start, end)
  *
- *	Ensure coherency between the Icache and the Dcache in the
+ *	Ensure coherency between the I cache and the D cache in the
  *	region described by start.  If you have non-snooping
  *	Harvard caches, you need to implement this function.
  *
@@ -222,34 +220,34 @@ ENTRY(xsc3_coherent_kern_range)
 /* FALLTHROUGH */
 ENTRY(xsc3_coherent_user_range)
 	bic	r0, r0, #CACHELINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D line
 	add	r0, r0, #CACHELINESIZE
 	cmp	r0, r1
 	blo	1b
 	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ Invalidate I cache & BTB
-	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write Buffer
-	mcr	p15, 0, r0, c7, c5, 4		@ Prefetch Flush
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate L1 I cache and BTB
+	mcr	p15, 0, r0, c7, c10, 4		@ data write barrier
+	mcr	p15, 0, r0, c7, c5, 4		@ prefetch flush
 	mov	pc, lr
 
 /*
  *	flush_kern_dcache_page(void *page)
  *
  *	Ensure no D cache aliasing occurs, either with itself or
- *	the I cache
+ *	the I cache.
  *
  *	- addr	- page aligned address
  */
 ENTRY(xsc3_flush_kern_dcache_page)
 	add	r1, r0, #PAGE_SZ
-1:	mcr	p15, 0, r0, c7, c14, 1		@ Clean/Invalidate D Cache line
+1:	mcr	p15, 0, r0, c7, c14, 1		@ clean/invalidate L1 D line
 	add	r0, r0, #CACHELINESIZE
 	cmp	r0, r1
 	blo	1b
 	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ Invalidate I cache & BTB
-	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write Buffer
-	mcr	p15, 0, r0, c7, c5, 4		@ Prefetch Flush
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate L1 I cache and BTB
+	mcr	p15, 0, r0, c7, c10, 4		@ data write barrier
+	mcr	p15, 0, r0, c7, c5, 4		@ prefetch flush
 	mov	pc, lr
 
 /*
@@ -266,17 +264,17 @@ ENTRY(xsc3_flush_kern_dcache_page)
 ENTRY(xsc3_dma_inv_range)
 	tst	r0, #CACHELINESIZE - 1
 	bic	r0, r0, #CACHELINESIZE - 1
-	mcrne	p15, 0, r0, c7, c10, 1		@ clean L1 D entry
-	mcrne	p15, 1, r0, c7, c11, 1		@ clean L2 D entry
+	mcrne	p15, 0, r0, c7, c10, 1		@ clean L1 D line
+	mcrne	p15, 1, r0, c7, c11, 1		@ clean L2 line
 	tst	r1, #CACHELINESIZE - 1
-	mcrne	p15, 0, r1, c7, c10, 1		@ clean L1 D entry
-	mcrne	p15, 1, r1, c7, c11, 1		@ clean L2 D entry
-1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate L1 D entry
-	mcr	p15, 1, r0, c7, c7, 1		@ Invalidate L2 D cache line
+	mcrne	p15, 0, r1, c7, c10, 1		@ clean L1 D line
+	mcrne	p15, 1, r1, c7, c11, 1		@ clean L2 line
+1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate L1 D line
+	mcr	p15, 1, r0, c7, c7, 1		@ invalidate L2 line
 	add	r0, r0, #CACHELINESIZE
 	cmp	r0, r1
 	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write Buffer
+	mcr	p15, 0, r0, c7, c10, 4		@ data write barrier
 	mov	pc, lr
 
 /*
@@ -289,12 +287,12 @@ ENTRY(xsc3_dma_inv_range)
  */
 ENTRY(xsc3_dma_clean_range)
 	bic	r0, r0, #CACHELINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D entry
-	mcr	p15, 1, r0, c7, c11, 1		@ clean L2 D entry
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D line
+	mcr	p15, 1, r0, c7, c11, 1		@ clean L2 line
 	add	r0, r0, #CACHELINESIZE
 	cmp	r0, r1
 	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write Buffer
+	mcr	p15, 0, r0, c7, c10, 4		@ data write barrier
 	mov	pc, lr
 
 /*
@@ -307,13 +305,13 @@ ENTRY(xsc3_dma_clean_range)
  */
 ENTRY(xsc3_dma_flush_range)
 	bic	r0, r0, #CACHELINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c14, 1	@ Clean/invalidate L1 D cache line
-	mcr	p15, 1, r0, c7, c11, 1	@ Clean L2 D cache line
-	mcr	p15, 1, r0, c7, c7, 1	@ Invalidate L2 D cache line
+1:	mcr	p15, 0, r0, c7, c14, 1		@ clean/invalidate L1 D line
+	mcr	p15, 1, r0, c7, c11, 1		@ clean L2 line
+	mcr	p15, 1, r0, c7, c7, 1		@ invalidate L2 line
 	add	r0, r0, #CACHELINESIZE
 	cmp	r0, r1
 	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write Buffer
+	mcr	p15, 0, r0, c7, c10, 4		@ data write barrier
 	mov	pc, lr
 
 ENTRY(xsc3_cache_fns)
@@ -328,7 +326,7 @@ ENTRY(xsc3_cache_fns)
 	.long	xsc3_dma_flush_range
 
 ENTRY(cpu_xsc3_dcache_clean_area)
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D line
 	add	r0, r0, #CACHELINESIZE
 	subs	r1, r1, #CACHELINESIZE
 	bhi	1b
@@ -346,14 +344,14 @@ ENTRY(cpu_xsc3_dcache_clean_area)
 	.align	5
 ENTRY(cpu_xsc3_switch_mm)
 	clean_d_cache r1, r2
-	mcr	p15, 0, ip, c7, c5, 0		@ Invalidate I cache & BTB
-	mcr	p15, 0, ip, c7, c10, 4		@ Drain Write Buffer
-	mcr	p15, 0, ip, c7, c5, 4		@ Prefetch Flush
+	mcr	p15, 0, ip, c7, c5, 0		@ invalidate L1 I cache and BTB
+	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
+	mcr	p15, 0, ip, c7, c5, 4		@ prefetch flush
 #ifdef L2_CACHE_ENABLE
 	orr	r0, r0, #0x18			@ cache the page table in L2
 #endif
 	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I and D TLBs
 	cpwait_ret lr, ip
 
 /*
@@ -366,34 +364,34 @@ ENTRY(cpu_xsc3_switch_mm)
 ENTRY(cpu_xsc3_set_pte_ext)
 	str	r1, [r0], #-2048		@ linux version
 
-	bic	r2, r1, #0xff0			@ Keep C, B bits
+	bic	r2, r1, #0xff0			@ keep C, B bits
 	orr	r2, r2, #PTE_TYPE_EXT		@ extended page
-	tst	r1, #L_PTE_SHARED		@ Shared?
+	tst	r1, #L_PTE_SHARED		@ shared?
 	orrne	r2, r2, #0x200
 
 	eor	r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
 
-	tst	r3, #L_PTE_USER			@ User?
+	tst	r3, #L_PTE_USER			@ user?
 	orrne	r2, r2, #PTE_EXT_AP_URO_SRW	@ yes -> user r/o, system r/w
 
-	tst	r3, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
+	tst	r3, #L_PTE_WRITE | L_PTE_DIRTY	@ write and dirty?
 	orreq	r2, r2, #PTE_EXT_AP_UNO_SRW	@ yes -> user n/a, system r/w
 						@ combined with user -> user r/w
 
 #if L2_CACHE_ENABLE
-	@ If its cacheable it needs to be in L2 also.
+	@ If it's cacheable, it needs to be in L2 also.
 	eor	ip, r1, #L_PTE_CACHEABLE
 	tst	ip, #L_PTE_CACHEABLE
 	orreq	r2, r2, #PTE_EXT_TEX(0x5)
 #endif
 
-	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
+	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ present and young?
 	movne	r2, #0				@ no -> fault
 
 	str	r2, [r0]			@ hardware version
 	mov	ip, #0
-	mcr	p15, 0, r0, c7, c10, 1		@ Clean D cache line mcr
-	mcr	p15, 0, ip, c7, c10, 4		@ Drain Write Buffer
+	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D line
+	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
 	mov	pc, lr
 
 	.ltorg
@@ -406,17 +404,18 @@ ENTRY(cpu_xsc3_set_pte_ext)
 __xsc3_setup:
 	mov	r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
 	msr	cpsr_c, r0
-	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I, D caches & BTB
-	mcr	p15, 0, ip, c7, c10, 4		@ Drain Write Buffer
-	mcr	p15, 0, ip, c7, c5, 4		@ Prefetch Flush
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I, D TLBs
+	mcr	p15, 0, ip, c7, c7, 0		@ invalidate L1 caches and BTB
+	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
+	mcr	p15, 0, ip, c7, c5, 4		@ prefetch flush
+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I and D TLBs
 #if L2_CACHE_ENABLE
 	orr	r4, r4, #0x18			@ cache the page table in L2
 #endif
 	mcr	p15, 0, r4, c2, c0, 0		@ load page table pointer
-	mov	r0, #1				@ Allow access to CP0 and CP13
-	orr	r0, r0, #1 << 13		@ Its undefined whether this
-	mcr	p15, 0, r0, c15, c1, 0		@ affects USR or SVC modes
+
+	mov	r0, #0				@ don't allow CP access
+	mcr	p15, 0, r0, c15, c1, 0		@ write CP access register
+
 	mrc	p15, 0, r0, c1, c0, 1		@ get auxiliary control reg
 	and	r0, r0, #2			@ preserve bit P bit setting
 #if L2_CACHE_ENABLE
@@ -427,9 +426,9 @@ __xsc3_setup:
 	adr	r5, xsc3_crval
 	ldmia	r5, {r5, r6}
 	mrc	p15, 0, r0, c1, c0, 0		@ get control register
-	bic	r0, r0, r5			@ .... .... .... ..A.
-	orr	r0, r0, r6			@ .... .... .... .C.M
-	orr	r0, r0, #0x00000800		@ ..VI Z..S .... ....
+	bic	r0, r0, r5			@ ..V. ..R. .... ..A.
+	orr	r0, r0, r6			@ ..VI Z..S .... .C.M (mmu)
+						@ ...I Z..S .... .... (uc)
 #if L2_CACHE_ENABLE
 	orr 	r0, r0, #0x04000000		@ L2 enable
 #endif
@@ -439,7 +438,7 @@ __xsc3_setup:
 
 	.type	xsc3_crval, #object
 xsc3_crval:
-	crval	clear=0x04003b02, mmuset=0x00003105, ucset=0x00001100
+	crval	clear=0x04002202, mmuset=0x00003905, ucset=0x00001900
 
 	__INITDATA
 
@@ -474,7 +473,7 @@ cpu_elf_name:
 
 	.type	cpu_xsc3_name, #object
 cpu_xsc3_name:
-	.asciz	"XScale-Core3"
+	.asciz	"XScale-V3 based processor"
 	.size	cpu_xsc3_name, . - cpu_xsc3_name
 
 	.align
@@ -490,7 +489,7 @@ __xsc3_proc_info:
 		PMD_SECT_CACHEABLE | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
-	.long   PMD_TYPE_SECT | \
+	.long	PMD_TYPE_SECT | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
 	b	__xsc3_setup
-- 
cgit v1.1


From dcda7e4ba1adec80089ec784964b32f9fd653237 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Mon, 5 Feb 2007 14:47:35 +0100
Subject: [ARM] 4126/1: Add the ARM specific barriers

There are three barriers - ISB, DMB and DSB for different
scenarious. This patch adds their definitions in the system.h file.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/system.h | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h
index aa223fc..e5aa372 100644
--- a/include/asm-arm/system.h
+++ b/include/asm-arm/system.h
@@ -193,11 +193,19 @@ extern unsigned int user_debug;
 #endif
 
 #if __LINUX_ARM_ARCH__ >= 6
-#define mb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \
-                                   : : "r" (0) : "memory")
+#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \
+				    : : "r" (0) : "memory")
+#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
+				    : : "r" (0) : "memory")
+#define dmb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \
+				    : : "r" (0) : "memory")
 #else
-#define mb() __asm__ __volatile__ ("" : : : "memory")
+#define isb() __asm__ __volatile__ ("" : : : "memory")
+#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
+				    : : "r" (0) : "memory")
+#define dmb() __asm__ __volatile__ ("" : : : "memory")
 #endif
+#define mb() dmb()
 #define rmb() mb()
 #define wmb() mb()
 #define read_barrier_depends() do { } while(0)
-- 
cgit v1.1


From 620879c9e33262426db0ade650be5d7a2046377b Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Mon, 5 Feb 2007 14:47:46 +0100
Subject: [ARM] 4127/1: Flush the prefetch buffer after changing the DACR

The ARM Architecture Reference Manual specifies that a prefetch flush
is needed after changing the DACR register (chapter B2.7.6).

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/domain.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/asm-arm/domain.h b/include/asm-arm/domain.h
index 4c2885a..3c12a76 100644
--- a/include/asm-arm/domain.h
+++ b/include/asm-arm/domain.h
@@ -57,6 +57,7 @@
 	__asm__ __volatile__(				\
 	"mcr	p15, 0, %0, c3, c0	@ set domain"	\
 	  : : "r" (x));					\
+	isb();						\
 	} while (0)
 
 #define modify_domain(dom,type)					\
-- 
cgit v1.1


From 9d99df4b10eef130dacb5f772cd589c625b03634 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Mon, 5 Feb 2007 14:47:40 +0100
Subject: [ARM] 4128/1: Architecture compliant TTBR changing sequence

On newer architectures (ARMv6, ARMv7), the depth of the prefetch and
branch prediction is implementation defined and there is a small risk
of wrong ASID tagging when changing TTBR0 before setting the new
context id. The recommended solution is to set a reserved ASID during
TTBR changing. This patch reserves ASID 0.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/context.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index 79e8002..9da43a0 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -19,7 +19,8 @@ unsigned int cpu_last_asid = { 1 << ASID_BITS };
 /*
  * We fork()ed a process, and we need a new context for the child
  * to run in.  We reserve version 0 for initial tasks so we will
- * always allocate an ASID.
+ * always allocate an ASID. The ASID 0 is reserved for the TTBR
+ * register changing sequence.
  */
 void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 {
@@ -38,8 +39,15 @@ void __new_context(struct mm_struct *mm)
 	 * If we've used up all our ASIDs, we need
 	 * to start a new version and flush the TLB.
 	 */
-	if ((asid & ~ASID_MASK) == 0)
+	if ((asid & ~ASID_MASK) == 0) {
+		asid = ++cpu_last_asid;
+		/* set the reserved ASID before flushing the TLB */
+		asm("mcr	p15, 0, %0, c13, c0, 1	@ set reserved context ID\n"
+		    :
+		    : "r" (0));
+		isb();
 		flush_tlb_all();
+	}
 
 	mm->context.id = asid;
 }
-- 
cgit v1.1


From e6a5d66f58431c66c79e236f722a5ad7dd959ef3 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Mon, 5 Feb 2007 14:47:51 +0100
Subject: [ARM] 4129/1: Add barriers after the TLB operations

The architecture specification states that TLB operations are
guaranteed to be complete only after the execution of a DSB (Data
Synchronisation Barrier, former Data Write Barrier or Drain Write
Buffer). The branch target cache invalidation is also needed. The ISB
(Instruction Synchronisation Barrier, formerly Prefetch Flush) is
needed unless there will be a return from exception before the
corresponding mapping is used (i.e. user mappings).

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/tlb-v6.S       |  4 ++++
 include/asm-arm/tlbflush.h | 50 +++++++++++++++++++++++++++++++++++-----------
 2 files changed, 42 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mm/tlb-v6.S b/arch/arm/mm/tlb-v6.S
index fd6adde..20f84bb 100644
--- a/arch/arm/mm/tlb-v6.S
+++ b/arch/arm/mm/tlb-v6.S
@@ -53,6 +53,8 @@ ENTRY(v6wbi_flush_user_tlb_range)
 	add	r0, r0, #PAGE_SZ
 	cmp	r0, r1
 	blo	1b
+	mcr	p15, 0, ip, c7, c5, 6		@ flush BTAC/BTB
+	mcr	p15, 0, ip, c7, c10, 4		@ data synchronization barrier
 	mov	pc, lr
 
 /*
@@ -80,7 +82,9 @@ ENTRY(v6wbi_flush_kern_tlb_range)
 	add	r0, r0, #PAGE_SZ
 	cmp	r0, r1
 	blo	1b
+	mcr	p15, 0, r2, c7, c5, 6		@ flush BTAC/BTB
 	mcr	p15, 0, r2, c7, c10, 4		@ data synchronization barrier
+	mcr	p15, 0, r2, c7, c5, 4		@ prefetch flush
 	mov	pc, lr
 
 	.section ".text.init", #alloc, #execinstr
diff --git a/include/asm-arm/tlbflush.h b/include/asm-arm/tlbflush.h
index cd10a0b..08c6991 100644
--- a/include/asm-arm/tlbflush.h
+++ b/include/asm-arm/tlbflush.h
@@ -247,7 +247,7 @@ static inline void local_flush_tlb_all(void)
 	const unsigned int __tlb_flag = __cpu_tlb_flags;
 
 	if (tlb_flag(TLB_WB))
-		asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero) : "cc");
+		dsb();
 
 	if (tlb_flag(TLB_V3_FULL))
 		asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
@@ -257,6 +257,15 @@ static inline void local_flush_tlb_all(void)
 		asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc");
 	if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL))
 		asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
+
+	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
+		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
+		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+		/* flush the branch target cache */
+		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+		dsb();
+		isb();
+	}
 }
 
 static inline void local_flush_tlb_mm(struct mm_struct *mm)
@@ -266,7 +275,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 	const unsigned int __tlb_flag = __cpu_tlb_flags;
 
 	if (tlb_flag(TLB_WB))
-		asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero) : "cc");
+		dsb();
 
 	if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) {
 		if (tlb_flag(TLB_V3_FULL))
@@ -285,6 +294,14 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 		asm("mcr p15, 0, %0, c8, c6, 2" : : "r" (asid) : "cc");
 	if (tlb_flag(TLB_V6_I_ASID))
 		asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc");
+
+	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
+		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
+		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+		/* flush the branch target cache */
+		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+		dsb();
+	}
 }
 
 static inline void
@@ -296,7 +313,7 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 	uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm);
 
 	if (tlb_flag(TLB_WB))
-		asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero));
+		dsb();
 
 	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
 		if (tlb_flag(TLB_V3_PAGE))
@@ -317,6 +334,14 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 		asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc");
 	if (tlb_flag(TLB_V6_I_PAGE))
 		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
+
+	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
+		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
+		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+		/* flush the branch target cache */
+		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+		dsb();
+	}
 }
 
 static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
@@ -327,7 +352,7 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
 	kaddr &= PAGE_MASK;
 
 	if (tlb_flag(TLB_WB))
-		asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero) : "cc");
+		dsb();
 
 	if (tlb_flag(TLB_V3_PAGE))
 		asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (kaddr) : "cc");
@@ -347,11 +372,14 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
 	if (tlb_flag(TLB_V6_I_PAGE))
 		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
 
-	/* The ARM ARM states that the completion of a TLB maintenance
-	 * operation is only guaranteed by a DSB instruction
-	 */
-	if (tlb_flag(TLB_V6_U_PAGE | TLB_V6_D_PAGE | TLB_V6_I_PAGE))
-		asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero) : "cc");
+	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
+		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
+		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+		/* flush the branch target cache */
+		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+		dsb();
+		isb();
+	}
 }
 
 /*
@@ -369,15 +397,13 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
  */
 static inline void flush_pmd_entry(pmd_t *pmd)
 {
-	const unsigned int zero = 0;
 	const unsigned int __tlb_flag = __cpu_tlb_flags;
 
 	if (tlb_flag(TLB_DCLEAN))
 		asm("mcr	p15, 0, %0, c7, c10, 1	@ flush_pmd"
 			: : "r" (pmd) : "cc");
 	if (tlb_flag(TLB_WB))
-		asm("mcr	p15, 0, %0, c7, c10, 4	@ flush_pmd"
-			: : "r" (zero) : "cc");
+		dsb();
 }
 
 static inline void clean_pmd_entry(pmd_t *pmd)
-- 
cgit v1.1


From 56660faf9e8088542e85207df45fb9c5f4dd3909 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Mon, 5 Feb 2007 14:48:02 +0100
Subject: [ARM] 4133/1: Add ISB after changes to CP15 registers

According to ARM ARM, changes to the CP15 registers are only
guaranteed to be visible after an Instruction Synchronization Barrier
(ISB). This patch adds the ISB at the end of set_cr and
set_copro_access functions and also moves them further down in the
file, below the isb macro definition.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/system.h | 70 +++++++++++++++++++++++++-----------------------
 1 file changed, 36 insertions(+), 34 deletions(-)

diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h
index e5aa372..f438690 100644
--- a/include/asm-arm/system.h
+++ b/include/asm-arm/system.h
@@ -140,6 +140,40 @@ static inline int cpu_is_xsc3(void)
 #define	cpu_is_xscale()	1
 #endif
 
+#define UDBG_UNDEFINED	(1 << 0)
+#define UDBG_SYSCALL	(1 << 1)
+#define UDBG_BADABORT	(1 << 2)
+#define UDBG_SEGV	(1 << 3)
+#define UDBG_BUS	(1 << 4)
+
+extern unsigned int user_debug;
+
+#if __LINUX_ARM_ARCH__ >= 4
+#define vectors_high()	(cr_alignment & CR_V)
+#else
+#define vectors_high()	(0)
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 6
+#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \
+				    : : "r" (0) : "memory")
+#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
+				    : : "r" (0) : "memory")
+#define dmb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \
+				    : : "r" (0) : "memory")
+#else
+#define isb() __asm__ __volatile__ ("" : : : "memory")
+#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
+				    : : "r" (0) : "memory")
+#define dmb() __asm__ __volatile__ ("" : : : "memory")
+#endif
+#define mb() dmb()
+#define rmb() mb()
+#define wmb() mb()
+#define read_barrier_depends() do { } while(0)
+#define set_mb(var, value)  do { var = value; mb(); } while (0)
+#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
+
 extern unsigned long cr_no_alignment;	/* defined in entry-armv.S */
 extern unsigned long cr_alignment;	/* defined in entry-armv.S */
 
@@ -154,6 +188,7 @@ static inline void set_cr(unsigned int val)
 {
 	asm volatile("mcr p15, 0, %0, c1, c0, 0	@ set CR"
 	  : : "r" (val) : "cc");
+	isb();
 }
 
 #ifndef CONFIG_SMP
@@ -176,42 +211,9 @@ static inline void set_copro_access(unsigned int val)
 {
 	asm volatile("mcr p15, 0, %0, c1, c0, 2 @ set copro access"
 	  : : "r" (val) : "cc");
+	isb();
 }
 
-#define UDBG_UNDEFINED	(1 << 0)
-#define UDBG_SYSCALL	(1 << 1)
-#define UDBG_BADABORT	(1 << 2)
-#define UDBG_SEGV	(1 << 3)
-#define UDBG_BUS	(1 << 4)
-
-extern unsigned int user_debug;
-
-#if __LINUX_ARM_ARCH__ >= 4
-#define vectors_high()	(cr_alignment & CR_V)
-#else
-#define vectors_high()	(0)
-#endif
-
-#if __LINUX_ARM_ARCH__ >= 6
-#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \
-				    : : "r" (0) : "memory")
-#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
-				    : : "r" (0) : "memory")
-#define dmb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \
-				    : : "r" (0) : "memory")
-#else
-#define isb() __asm__ __volatile__ ("" : : : "memory")
-#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
-				    : : "r" (0) : "memory")
-#define dmb() __asm__ __volatile__ ("" : : : "memory")
-#endif
-#define mb() dmb()
-#define rmb() mb()
-#define wmb() mb()
-#define read_barrier_depends() do { } while(0)
-#define set_mb(var, value)  do { var = value; mb(); } while (0)
-#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
-
 /*
  * switch_mm() may do a full cache flush over the context switch,
  * so enable interrupts over the context switch to avoid high
-- 
cgit v1.1


From 7f8e33546d17c7d8849be3a6623c3b6b3c9b588b Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Tue, 6 Feb 2007 17:29:53 +0000
Subject: [ARM] Don't call consistent_sync() for DMA coherent memory

Memory allocated by the coherent memory allocators will be marked
uncacheable, which means it's pointless calling consistent_sync()
to perform cache maintainence on this memory; it's just a waste of
CPU cycles.

Moreover, with the (subsequent) merge of outer cache support, it
actually breaks things to call consistent_sync() on anything but
direct-mapped memory.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/dmabounce.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 2e635b8..272702a 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -281,10 +281,14 @@ map_single(struct device *dev, void *ptr, size_t size,
 		ptr = buf->safe;
 
 		dma_addr = buf->safe_dma_addr;
+	} else {
+		/*
+		 * We don't need to sync the DMA buffer since
+		 * it was allocated via the coherent allocators.
+		 */
+		consistent_sync(ptr, size, dir);
 	}
 
-	consistent_sync(ptr, size, dir);
-
 	return dma_addr;
 }
 
@@ -397,7 +401,10 @@ sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		default:
 			BUG();
 		}
-		consistent_sync(buf->safe, size, dir);
+		/*
+		 * No need to sync the safe buffer - it was allocated
+		 * via the coherent allocators.
+		 */
 	} else {
 		consistent_sync(dma_to_virt(dev, dma_addr), size, dir);
 	}
-- 
cgit v1.1


From 953233dc9958ba2b29753d0f24e37a33a076a5f6 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Mon, 5 Feb 2007 14:48:08 +0100
Subject: [ARM] 4134/1: Add generic support for outer caches

The outer cache can be L2 as on RealView/EB MPCore platform or even L3
or further on ARMv7 cores. This patch adds the generic support for
flushing the outer cache in the DMA operations.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/dmabounce.c  |  1 +
 arch/arm/kernel/setup.c      |  3 +++
 arch/arm/mm/Kconfig          |  3 +++
 arch/arm/mm/consistent.c     |  6 ++++++
 include/asm-arm/cacheflush.h | 37 +++++++++++++++++++++++++++++++++++++
 5 files changed, 50 insertions(+)

diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 272702a..b4748e3 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -338,6 +338,7 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 			 */
 			ptr = (unsigned long)buf->ptr;
 			dmac_clean_range(ptr, ptr + size);
+			outer_clean_range(__pa(ptr), __pa(ptr) + size);
 		}
 		free_safe_buffer(device_info, buf);
 	}
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index bbab134..243aea4 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -88,6 +88,9 @@ struct cpu_user_fns cpu_user;
 #ifdef MULTI_CACHE
 struct cpu_cache_fns cpu_cache;
 #endif
+#ifdef CONFIG_OUTER_CACHE
+struct outer_cache_fns outer_cache;
+#endif
 
 struct stack {
 	u32 irq[3];
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index aade2f7..a84eed9 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -609,3 +609,6 @@ config NEEDS_SYSCALL_FOR_CMPXCHG
 	  Forget about fast user space cmpxchg support.
 	  It is just not possible.
 
+config OUTER_CACHE
+	bool
+	default n
diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c
index 6a9c362..83bd035 100644
--- a/arch/arm/mm/consistent.c
+++ b/arch/arm/mm/consistent.c
@@ -208,6 +208,7 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 		unsigned long kaddr = (unsigned long)page_address(page);
 		memset(page_address(page), 0, size);
 		dmac_flush_range(kaddr, kaddr + size);
+		outer_flush_range(__pa(kaddr), __pa(kaddr) + size);
 	}
 
 	/*
@@ -485,15 +486,20 @@ void consistent_sync(void *vaddr, size_t size, int direction)
 	unsigned long start = (unsigned long)vaddr;
 	unsigned long end   = start + size;
 
+	BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(end));
+
 	switch (direction) {
 	case DMA_FROM_DEVICE:		/* invalidate only */
 		dmac_inv_range(start, end);
+		outer_inv_range(__pa(start), __pa(end));
 		break;
 	case DMA_TO_DEVICE:		/* writeback only */
 		dmac_clean_range(start, end);
+		outer_clean_range(__pa(start), __pa(end));
 		break;
 	case DMA_BIDIRECTIONAL:		/* writeback and invalidate */
 		dmac_flush_range(start, end);
+		outer_flush_range(__pa(start), __pa(end));
 		break;
 	default:
 		BUG();
diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h
index 5f531ea..ce60b37 100644
--- a/include/asm-arm/cacheflush.h
+++ b/include/asm-arm/cacheflush.h
@@ -190,6 +190,12 @@ struct cpu_cache_fns {
 	void (*dma_flush_range)(unsigned long, unsigned long);
 };
 
+struct outer_cache_fns {
+	void (*inv_range)(unsigned long, unsigned long);
+	void (*clean_range)(unsigned long, unsigned long);
+	void (*flush_range)(unsigned long, unsigned long);
+};
+
 /*
  * Select the calling method
  */
@@ -246,6 +252,37 @@ extern void dmac_flush_range(unsigned long, unsigned long);
 
 #endif
 
+#ifdef CONFIG_OUTER_CACHE
+
+extern struct outer_cache_fns outer_cache;
+
+static inline void outer_inv_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.inv_range)
+		outer_cache.inv_range(start, end);
+}
+static inline void outer_clean_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.clean_range)
+		outer_cache.clean_range(start, end);
+}
+static inline void outer_flush_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.flush_range)
+		outer_cache.flush_range(start, end);
+}
+
+#else
+
+static inline void outer_inv_range(unsigned long start, unsigned long end)
+{ }
+static inline void outer_clean_range(unsigned long start, unsigned long end)
+{ }
+static inline void outer_flush_range(unsigned long start, unsigned long end)
+{ }
+
+#endif
+
 /*
  * flush_cache_vmap() is used when creating mappings (eg, via vmap,
  * vmalloc, ioremap etc) in kernel space for pages.  Since the
-- 
cgit v1.1


From 7ae5a761d2ffc4cf7d3248e09f4d3da234434f30 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Tue, 6 Feb 2007 17:39:31 +0000
Subject: [ARM] Convert DMA cache handling to take const void * args

The DMA cache handling functions take virtual addresses, but in the
form of unsigned long arguments.  This leads to a little confusion
about what exactly they take.  So, convert them to take const void *
instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/dmabounce.c   |  7 +++----
 arch/arm/mm/consistent.c      | 13 ++++++-------
 include/asm-arm/cacheflush.h  | 12 ++++++------
 include/asm-arm/dma-mapping.h |  2 +-
 4 files changed, 16 insertions(+), 18 deletions(-)

diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index b4748e3..2362c49 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -321,12 +321,12 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		DO_STATS ( device_info->bounce_count++ );
 
 		if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) {
-			unsigned long ptr;
+			void *ptr = buf->ptr;
 
 			dev_dbg(dev,
 				"%s: copy back safe %p to unsafe %p size %d\n",
-				__func__, buf->safe, buf->ptr, size);
-			memcpy(buf->ptr, buf->safe, size);
+				__func__, buf->safe, ptr, size);
+			memcpy(ptr, buf->safe, size);
 
 			/*
 			 * DMA buffers must have the same cache properties
@@ -336,7 +336,6 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 			 * bidirectional case because we know the cache
 			 * lines will be coherent with the data written.
 			 */
-			ptr = (unsigned long)buf->ptr;
 			dmac_clean_range(ptr, ptr + size);
 			outer_clean_range(__pa(ptr), __pa(ptr) + size);
 		}
diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c
index 83bd035..166aee1 100644
--- a/arch/arm/mm/consistent.c
+++ b/arch/arm/mm/consistent.c
@@ -205,10 +205,10 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 	 * kernel direct-mapped region for device DMA.
 	 */
 	{
-		unsigned long kaddr = (unsigned long)page_address(page);
-		memset(page_address(page), 0, size);
-		dmac_flush_range(kaddr, kaddr + size);
-		outer_flush_range(__pa(kaddr), __pa(kaddr) + size);
+		void *ptr = page_address(page);
+		memset(ptr, 0, size);
+		dmac_flush_range(ptr, ptr + size);
+		outer_flush_range(__pa(ptr), __pa(ptr) + size);
 	}
 
 	/*
@@ -481,10 +481,9 @@ core_initcall(consistent_init);
  * platforms with CONFIG_DMABOUNCE.
  * Use the driver DMA support - see dma-mapping.h (dma_sync_*)
  */
-void consistent_sync(void *vaddr, size_t size, int direction)
+void consistent_sync(const void *start, size_t size, int direction)
 {
-	unsigned long start = (unsigned long)vaddr;
-	unsigned long end   = start + size;
+	const void *end = start + size;
 
 	BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(end));
 
diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h
index ce60b37..afad32c 100644
--- a/include/asm-arm/cacheflush.h
+++ b/include/asm-arm/cacheflush.h
@@ -185,9 +185,9 @@ struct cpu_cache_fns {
 	void (*coherent_user_range)(unsigned long, unsigned long);
 	void (*flush_kern_dcache_page)(void *);
 
-	void (*dma_inv_range)(unsigned long, unsigned long);
-	void (*dma_clean_range)(unsigned long, unsigned long);
-	void (*dma_flush_range)(unsigned long, unsigned long);
+	void (*dma_inv_range)(const void *, const void *);
+	void (*dma_clean_range)(const void *, const void *);
+	void (*dma_flush_range)(const void *, const void *);
 };
 
 struct outer_cache_fns {
@@ -246,9 +246,9 @@ extern void __cpuc_flush_dcache_page(void *);
 #define dmac_clean_range		__glue(_CACHE,_dma_clean_range)
 #define dmac_flush_range		__glue(_CACHE,_dma_flush_range)
 
-extern void dmac_inv_range(unsigned long, unsigned long);
-extern void dmac_clean_range(unsigned long, unsigned long);
-extern void dmac_flush_range(unsigned long, unsigned long);
+extern void dmac_inv_range(const void *, const void *);
+extern void dmac_clean_range(const void *, const void *);
+extern void dmac_flush_range(const void *, const void *);
 
 #endif
 
diff --git a/include/asm-arm/dma-mapping.h b/include/asm-arm/dma-mapping.h
index 9bc46b4..a1d574c 100644
--- a/include/asm-arm/dma-mapping.h
+++ b/include/asm-arm/dma-mapping.h
@@ -17,7 +17,7 @@
  * platforms with CONFIG_DMABOUNCE.
  * Use the driver DMA support - see dma-mapping.h (dma_sync_*)
  */
-extern void consistent_sync(void *kaddr, size_t size, int rw);
+extern void consistent_sync(const void *kaddr, size_t size, int rw);
 
 /*
  * Return whether the given device DMA address mask can be supported
-- 
cgit v1.1


From a93d48cc6019f84394b31d10c0d830a3b71696be Mon Sep 17 00:00:00 2001
From: Andrew Victor <andrew@sanpeople.com>
Date: Thu, 1 Feb 2007 09:22:23 +0100
Subject: [ARM] 4119/1: AT91: Fix build of AT91SAM9260

Fix build failure of AT91SAM9260.

The AT91RM9200 ethernet driver (at91_ether.c) stores platform data in a
"struct at91_eth_data" structure, but the AT91SAM9260 (and AT91SAM9263)
ethernet driver (macb.c) [developed on the AVR32 architecture] expects a
"struct eth_platform_data".

Since the platform data of the two drivers is very similar, we continue
to use the "struct at91_eth_data" for all AT91 processors but add a
    #define eth_platform_data      at91_eth_data
in board.h to keep the MACB driver happy.

Original patch by Jan Altenberg.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91rm9200/at91sam9260_devices.c | 6 +++---
 arch/arm/mach-at91rm9200/board-sam9260ek.c     | 2 +-
 include/asm-arm/arch-at91rm9200/board.h        | 4 ++++
 3 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-at91rm9200/at91sam9260_devices.c b/arch/arm/mach-at91rm9200/at91sam9260_devices.c
index f42d3a4..f338f78 100644
--- a/arch/arm/mach-at91rm9200/at91sam9260_devices.c
+++ b/arch/arm/mach-at91rm9200/at91sam9260_devices.c
@@ -128,7 +128,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
 
 #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
 static u64 eth_dmamask = 0xffffffffUL;
-static struct eth_platform_data eth_data;
+static struct at91_eth_data eth_data;
 
 static struct resource eth_resources[] = {
 	[0] = {
@@ -155,7 +155,7 @@ static struct platform_device at91sam9260_eth_device = {
 	.num_resources	= ARRAY_SIZE(eth_resources),
 };
 
-void __init at91_add_device_eth(struct eth_platform_data *data)
+void __init at91_add_device_eth(struct at91_eth_data *data)
 {
 	if (!data)
 		return;
@@ -192,7 +192,7 @@ void __init at91_add_device_eth(struct eth_platform_data *data)
 	platform_device_register(&at91sam9260_eth_device);
 }
 #else
-void __init at91_add_device_eth(struct eth_platform_data *data) {}
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91rm9200/board-sam9260ek.c b/arch/arm/mach-at91rm9200/board-sam9260ek.c
index da5d58a..37c7a7d 100644
--- a/arch/arm/mach-at91rm9200/board-sam9260ek.c
+++ b/arch/arm/mach-at91rm9200/board-sam9260ek.c
@@ -118,7 +118,7 @@ static struct spi_board_info ek_spi_devices[] = {
 /*
  * MACB Ethernet device
  */
-static struct __initdata eth_platform_data ek_macb_data = {
+static struct __initdata at91_eth_data ek_macb_data = {
 	.phy_irq_pin	= AT91_PIN_PA7,
 	.is_rmii	= 1,
 };
diff --git a/include/asm-arm/arch-at91rm9200/board.h b/include/asm-arm/arch-at91rm9200/board.h
index 768e0fc..f3a974b 100644
--- a/include/asm-arm/arch-at91rm9200/board.h
+++ b/include/asm-arm/arch-at91rm9200/board.h
@@ -69,6 +69,10 @@ struct at91_eth_data {
 };
 extern void __init at91_add_device_eth(struct at91_eth_data *data);
 
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263)
+#define eth_platform_data	at91_eth_data
+#endif
+
  /* USB Host */
 struct at91_usbh_data {
 	u8		ports;		/* number of ports on root hub */
-- 
cgit v1.1


From 9d0412680e6c7b685ee466842047bcfb924d6dc5 Mon Sep 17 00:00:00 2001
From: Andrew Victor <andrew@sanpeople.com>
Date: Mon, 5 Feb 2007 11:42:07 +0100
Subject: [ARM] 4124/1: Rename mach-at91rm9200 and arch-at91rm9200 directories

Now that Linux includes support for the Atmel AT91SAM9260 and
AT91SAM9261 processors in addition to the original Atmel AT91RM9200
(with support for more AT91 processors pending), the "mach-at91rm9200"
and "arch-at91rm9200" directories should be renamed to indicate their
more generic nature.

The following git commands should be run BEFORE applying this patch:
  git-mv arch/arm/mach-at91rm9200 arch/arm/mach-at91
  git-mv include/asm-arm/arch-at91rm9200 include/asm-arm/arch-at91

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                                   |   2 +-
 arch/arm/Makefile                                  |   2 +-
 arch/arm/mach-at91/Kconfig                         | 148 ++++
 arch/arm/mach-at91/Makefile                        |  49 ++
 arch/arm/mach-at91/Makefile.boot                   |   9 +
 arch/arm/mach-at91/at91rm9200.c                    | 294 +++++++
 arch/arm/mach-at91/at91rm9200_devices.c            | 875 +++++++++++++++++++++
 arch/arm/mach-at91/at91rm9200_time.c               | 146 ++++
 arch/arm/mach-at91/at91sam9260.c                   | 295 +++++++
 arch/arm/mach-at91/at91sam9260_devices.c           | 867 ++++++++++++++++++++
 arch/arm/mach-at91/at91sam9261.c                   | 290 +++++++
 arch/arm/mach-at91/at91sam9261_devices.c           | 741 +++++++++++++++++
 arch/arm/mach-at91/at91sam926x_time.c              | 114 +++
 arch/arm/mach-at91/board-1arm.c                    | 102 +++
 arch/arm/mach-at91/board-carmeva.c                 | 149 ++++
 arch/arm/mach-at91/board-csb337.c                  | 145 ++++
 arch/arm/mach-at91/board-csb637.c                  | 109 +++
 arch/arm/mach-at91/board-dk.c                      | 216 +++++
 arch/arm/mach-at91/board-eb9200.c                  | 123 +++
 arch/arm/mach-at91/board-ek.c                      | 174 ++++
 arch/arm/mach-at91/board-kafa.c                    | 109 +++
 arch/arm/mach-at91/board-kb9202.c                  | 143 ++++
 arch/arm/mach-at91/board-sam9260ek.c               | 202 +++++
 arch/arm/mach-at91/board-sam9261ek.c               | 259 ++++++
 arch/arm/mach-at91/clock.c                         | 644 +++++++++++++++
 arch/arm/mach-at91/clock.h                         |  31 +
 arch/arm/mach-at91/generic.h                       |  49 ++
 arch/arm/mach-at91/gpio.c                          | 414 ++++++++++
 arch/arm/mach-at91/irq.c                           | 168 ++++
 arch/arm/mach-at91/leds.c                          |  99 +++
 arch/arm/mach-at91/pm.c                            | 227 ++++++
 arch/arm/mach-at91rm9200/Kconfig                   | 148 ----
 arch/arm/mach-at91rm9200/Makefile                  |  49 --
 arch/arm/mach-at91rm9200/Makefile.boot             |   9 -
 arch/arm/mach-at91rm9200/at91rm9200.c              | 294 -------
 arch/arm/mach-at91rm9200/at91rm9200_devices.c      | 875 ---------------------
 arch/arm/mach-at91rm9200/at91rm9200_time.c         | 146 ----
 arch/arm/mach-at91rm9200/at91sam9260.c             | 295 -------
 arch/arm/mach-at91rm9200/at91sam9260_devices.c     | 867 --------------------
 arch/arm/mach-at91rm9200/at91sam9261.c             | 290 -------
 arch/arm/mach-at91rm9200/at91sam9261_devices.c     | 741 -----------------
 arch/arm/mach-at91rm9200/at91sam926x_time.c        | 114 ---
 arch/arm/mach-at91rm9200/board-1arm.c              | 102 ---
 arch/arm/mach-at91rm9200/board-carmeva.c           | 149 ----
 arch/arm/mach-at91rm9200/board-csb337.c            | 145 ----
 arch/arm/mach-at91rm9200/board-csb637.c            | 109 ---
 arch/arm/mach-at91rm9200/board-dk.c                | 216 -----
 arch/arm/mach-at91rm9200/board-eb9200.c            | 123 ---
 arch/arm/mach-at91rm9200/board-ek.c                | 174 ----
 arch/arm/mach-at91rm9200/board-kafa.c              | 109 ---
 arch/arm/mach-at91rm9200/board-kb9202.c            | 143 ----
 arch/arm/mach-at91rm9200/board-sam9260ek.c         | 202 -----
 arch/arm/mach-at91rm9200/board-sam9261ek.c         | 259 ------
 arch/arm/mach-at91rm9200/clock.c                   | 644 ---------------
 arch/arm/mach-at91rm9200/clock.h                   |  31 -
 arch/arm/mach-at91rm9200/generic.h                 |  49 --
 arch/arm/mach-at91rm9200/gpio.c                    | 414 ----------
 arch/arm/mach-at91rm9200/irq.c                     | 168 ----
 arch/arm/mach-at91rm9200/leds.c                    |  99 ---
 arch/arm/mach-at91rm9200/pm.c                      | 227 ------
 arch/avr32/mach-at32ap/clock.c                     |   2 +-
 arch/avr32/mach-at32ap/clock.h                     |   2 +-
 include/asm-arm/arch-at91/at91_aic.h               |  53 ++
 include/asm-arm/arch-at91/at91_dbgu.h              |  45 ++
 include/asm-arm/arch-at91/at91_ecc.h               |  38 +
 include/asm-arm/arch-at91/at91_lcdc.h              | 148 ++++
 include/asm-arm/arch-at91/at91_mci.h               | 106 +++
 include/asm-arm/arch-at91/at91_pdc.h               |  36 +
 include/asm-arm/arch-at91/at91_pio.h               |  49 ++
 include/asm-arm/arch-at91/at91_pit.h               |  29 +
 include/asm-arm/arch-at91/at91_pmc.h               |  92 +++
 include/asm-arm/arch-at91/at91_rstc.h              |  39 +
 include/asm-arm/arch-at91/at91_rtc.h               |  75 ++
 include/asm-arm/arch-at91/at91_rtt.h               |  32 +
 include/asm-arm/arch-at91/at91_shdwc.h             |  33 +
 include/asm-arm/arch-at91/at91_spi.h               |  81 ++
 include/asm-arm/arch-at91/at91_ssc.h               | 106 +++
 include/asm-arm/arch-at91/at91_st.h                |  49 ++
 include/asm-arm/arch-at91/at91_tc.h                | 146 ++++
 include/asm-arm/arch-at91/at91_twi.h               |  57 ++
 include/asm-arm/arch-at91/at91_wdt.h               |  34 +
 include/asm-arm/arch-at91/at91rm9200.h             | 291 +++++++
 include/asm-arm/arch-at91/at91rm9200_emac.h        | 138 ++++
 include/asm-arm/arch-at91/at91rm9200_mc.h          | 160 ++++
 include/asm-arm/arch-at91/at91sam9260.h            | 125 +++
 include/asm-arm/arch-at91/at91sam9260_matrix.h     |  78 ++
 include/asm-arm/arch-at91/at91sam9261.h            | 292 +++++++
 include/asm-arm/arch-at91/at91sam9261_matrix.h     |  62 ++
 include/asm-arm/arch-at91/at91sam926x_mc.h         | 134 ++++
 include/asm-arm/arch-at91/board.h                  | 121 +++
 include/asm-arm/arch-at91/cpu.h                    |  49 ++
 include/asm-arm/arch-at91/debug-macro.S            |  39 +
 include/asm-arm/arch-at91/dma.h                    |  19 +
 include/asm-arm/arch-at91/entry-macro.S            |  26 +
 include/asm-arm/arch-at91/gpio.h                   | 199 +++++
 include/asm-arm/arch-at91/hardware.h               |  88 +++
 include/asm-arm/arch-at91/io.h                     |  32 +
 include/asm-arm/arch-at91/irqs.h                   |  44 ++
 include/asm-arm/arch-at91/memory.h                 |  39 +
 include/asm-arm/arch-at91/system.h                 |  53 ++
 include/asm-arm/arch-at91/timex.h                  |  37 +
 include/asm-arm/arch-at91/uncompress.h             |  56 ++
 include/asm-arm/arch-at91/vmalloc.h                |  26 +
 include/asm-arm/arch-at91rm9200/at91_aic.h         |  53 --
 include/asm-arm/arch-at91rm9200/at91_dbgu.h        |  45 --
 include/asm-arm/arch-at91rm9200/at91_ecc.h         |  38 -
 include/asm-arm/arch-at91rm9200/at91_lcdc.h        | 148 ----
 include/asm-arm/arch-at91rm9200/at91_mci.h         | 106 ---
 include/asm-arm/arch-at91rm9200/at91_pdc.h         |  36 -
 include/asm-arm/arch-at91rm9200/at91_pio.h         |  49 --
 include/asm-arm/arch-at91rm9200/at91_pit.h         |  29 -
 include/asm-arm/arch-at91rm9200/at91_pmc.h         |  92 ---
 include/asm-arm/arch-at91rm9200/at91_rstc.h        |  39 -
 include/asm-arm/arch-at91rm9200/at91_rtc.h         |  75 --
 include/asm-arm/arch-at91rm9200/at91_rtt.h         |  32 -
 include/asm-arm/arch-at91rm9200/at91_shdwc.h       |  33 -
 include/asm-arm/arch-at91rm9200/at91_spi.h         |  81 --
 include/asm-arm/arch-at91rm9200/at91_ssc.h         | 106 ---
 include/asm-arm/arch-at91rm9200/at91_st.h          |  49 --
 include/asm-arm/arch-at91rm9200/at91_tc.h          | 146 ----
 include/asm-arm/arch-at91rm9200/at91_twi.h         |  57 --
 include/asm-arm/arch-at91rm9200/at91_wdt.h         |  34 -
 include/asm-arm/arch-at91rm9200/at91rm9200.h       | 291 -------
 include/asm-arm/arch-at91rm9200/at91rm9200_emac.h  | 138 ----
 include/asm-arm/arch-at91rm9200/at91rm9200_mc.h    | 160 ----
 include/asm-arm/arch-at91rm9200/at91sam9260.h      | 125 ---
 .../asm-arm/arch-at91rm9200/at91sam9260_matrix.h   |  78 --
 include/asm-arm/arch-at91rm9200/at91sam9261.h      | 292 -------
 .../asm-arm/arch-at91rm9200/at91sam9261_matrix.h   |  62 --
 include/asm-arm/arch-at91rm9200/at91sam926x_mc.h   | 134 ----
 include/asm-arm/arch-at91rm9200/board.h            | 121 ---
 include/asm-arm/arch-at91rm9200/cpu.h              |  49 --
 include/asm-arm/arch-at91rm9200/debug-macro.S      |  39 -
 include/asm-arm/arch-at91rm9200/dma.h              |  19 -
 include/asm-arm/arch-at91rm9200/entry-macro.S      |  26 -
 include/asm-arm/arch-at91rm9200/gpio.h             | 199 -----
 include/asm-arm/arch-at91rm9200/hardware.h         |  88 ---
 include/asm-arm/arch-at91rm9200/io.h               |  32 -
 include/asm-arm/arch-at91rm9200/irqs.h             |  44 --
 include/asm-arm/arch-at91rm9200/memory.h           |  39 -
 include/asm-arm/arch-at91rm9200/system.h           |  53 --
 include/asm-arm/arch-at91rm9200/timex.h            |  37 -
 include/asm-arm/arch-at91rm9200/uncompress.h       |  56 --
 include/asm-arm/arch-at91rm9200/vmalloc.h          |  26 -
 include/asm-avr32/arch-at32ap/at91_pdc.h           |   2 +-
 145 files changed, 10552 insertions(+), 10552 deletions(-)
 create mode 100644 arch/arm/mach-at91/Kconfig
 create mode 100644 arch/arm/mach-at91/Makefile
 create mode 100644 arch/arm/mach-at91/Makefile.boot
 create mode 100644 arch/arm/mach-at91/at91rm9200.c
 create mode 100644 arch/arm/mach-at91/at91rm9200_devices.c
 create mode 100644 arch/arm/mach-at91/at91rm9200_time.c
 create mode 100644 arch/arm/mach-at91/at91sam9260.c
 create mode 100644 arch/arm/mach-at91/at91sam9260_devices.c
 create mode 100644 arch/arm/mach-at91/at91sam9261.c
 create mode 100644 arch/arm/mach-at91/at91sam9261_devices.c
 create mode 100644 arch/arm/mach-at91/at91sam926x_time.c
 create mode 100644 arch/arm/mach-at91/board-1arm.c
 create mode 100644 arch/arm/mach-at91/board-carmeva.c
 create mode 100644 arch/arm/mach-at91/board-csb337.c
 create mode 100644 arch/arm/mach-at91/board-csb637.c
 create mode 100644 arch/arm/mach-at91/board-dk.c
 create mode 100644 arch/arm/mach-at91/board-eb9200.c
 create mode 100644 arch/arm/mach-at91/board-ek.c
 create mode 100644 arch/arm/mach-at91/board-kafa.c
 create mode 100644 arch/arm/mach-at91/board-kb9202.c
 create mode 100644 arch/arm/mach-at91/board-sam9260ek.c
 create mode 100644 arch/arm/mach-at91/board-sam9261ek.c
 create mode 100644 arch/arm/mach-at91/clock.c
 create mode 100644 arch/arm/mach-at91/clock.h
 create mode 100644 arch/arm/mach-at91/generic.h
 create mode 100644 arch/arm/mach-at91/gpio.c
 create mode 100644 arch/arm/mach-at91/irq.c
 create mode 100644 arch/arm/mach-at91/leds.c
 create mode 100644 arch/arm/mach-at91/pm.c
 delete mode 100644 arch/arm/mach-at91rm9200/Kconfig
 delete mode 100644 arch/arm/mach-at91rm9200/Makefile
 delete mode 100644 arch/arm/mach-at91rm9200/Makefile.boot
 delete mode 100644 arch/arm/mach-at91rm9200/at91rm9200.c
 delete mode 100644 arch/arm/mach-at91rm9200/at91rm9200_devices.c
 delete mode 100644 arch/arm/mach-at91rm9200/at91rm9200_time.c
 delete mode 100644 arch/arm/mach-at91rm9200/at91sam9260.c
 delete mode 100644 arch/arm/mach-at91rm9200/at91sam9260_devices.c
 delete mode 100644 arch/arm/mach-at91rm9200/at91sam9261.c
 delete mode 100644 arch/arm/mach-at91rm9200/at91sam9261_devices.c
 delete mode 100644 arch/arm/mach-at91rm9200/at91sam926x_time.c
 delete mode 100644 arch/arm/mach-at91rm9200/board-1arm.c
 delete mode 100644 arch/arm/mach-at91rm9200/board-carmeva.c
 delete mode 100644 arch/arm/mach-at91rm9200/board-csb337.c
 delete mode 100644 arch/arm/mach-at91rm9200/board-csb637.c
 delete mode 100644 arch/arm/mach-at91rm9200/board-dk.c
 delete mode 100644 arch/arm/mach-at91rm9200/board-eb9200.c
 delete mode 100644 arch/arm/mach-at91rm9200/board-ek.c
 delete mode 100644 arch/arm/mach-at91rm9200/board-kafa.c
 delete mode 100644 arch/arm/mach-at91rm9200/board-kb9202.c
 delete mode 100644 arch/arm/mach-at91rm9200/board-sam9260ek.c
 delete mode 100644 arch/arm/mach-at91rm9200/board-sam9261ek.c
 delete mode 100644 arch/arm/mach-at91rm9200/clock.c
 delete mode 100644 arch/arm/mach-at91rm9200/clock.h
 delete mode 100644 arch/arm/mach-at91rm9200/generic.h
 delete mode 100644 arch/arm/mach-at91rm9200/gpio.c
 delete mode 100644 arch/arm/mach-at91rm9200/irq.c
 delete mode 100644 arch/arm/mach-at91rm9200/leds.c
 delete mode 100644 arch/arm/mach-at91rm9200/pm.c
 create mode 100644 include/asm-arm/arch-at91/at91_aic.h
 create mode 100644 include/asm-arm/arch-at91/at91_dbgu.h
 create mode 100644 include/asm-arm/arch-at91/at91_ecc.h
 create mode 100644 include/asm-arm/arch-at91/at91_lcdc.h
 create mode 100644 include/asm-arm/arch-at91/at91_mci.h
 create mode 100644 include/asm-arm/arch-at91/at91_pdc.h
 create mode 100644 include/asm-arm/arch-at91/at91_pio.h
 create mode 100644 include/asm-arm/arch-at91/at91_pit.h
 create mode 100644 include/asm-arm/arch-at91/at91_pmc.h
 create mode 100644 include/asm-arm/arch-at91/at91_rstc.h
 create mode 100644 include/asm-arm/arch-at91/at91_rtc.h
 create mode 100644 include/asm-arm/arch-at91/at91_rtt.h
 create mode 100644 include/asm-arm/arch-at91/at91_shdwc.h
 create mode 100644 include/asm-arm/arch-at91/at91_spi.h
 create mode 100644 include/asm-arm/arch-at91/at91_ssc.h
 create mode 100644 include/asm-arm/arch-at91/at91_st.h
 create mode 100644 include/asm-arm/arch-at91/at91_tc.h
 create mode 100644 include/asm-arm/arch-at91/at91_twi.h
 create mode 100644 include/asm-arm/arch-at91/at91_wdt.h
 create mode 100644 include/asm-arm/arch-at91/at91rm9200.h
 create mode 100644 include/asm-arm/arch-at91/at91rm9200_emac.h
 create mode 100644 include/asm-arm/arch-at91/at91rm9200_mc.h
 create mode 100644 include/asm-arm/arch-at91/at91sam9260.h
 create mode 100644 include/asm-arm/arch-at91/at91sam9260_matrix.h
 create mode 100644 include/asm-arm/arch-at91/at91sam9261.h
 create mode 100644 include/asm-arm/arch-at91/at91sam9261_matrix.h
 create mode 100644 include/asm-arm/arch-at91/at91sam926x_mc.h
 create mode 100644 include/asm-arm/arch-at91/board.h
 create mode 100644 include/asm-arm/arch-at91/cpu.h
 create mode 100644 include/asm-arm/arch-at91/debug-macro.S
 create mode 100644 include/asm-arm/arch-at91/dma.h
 create mode 100644 include/asm-arm/arch-at91/entry-macro.S
 create mode 100644 include/asm-arm/arch-at91/gpio.h
 create mode 100644 include/asm-arm/arch-at91/hardware.h
 create mode 100644 include/asm-arm/arch-at91/io.h
 create mode 100644 include/asm-arm/arch-at91/irqs.h
 create mode 100644 include/asm-arm/arch-at91/memory.h
 create mode 100644 include/asm-arm/arch-at91/system.h
 create mode 100644 include/asm-arm/arch-at91/timex.h
 create mode 100644 include/asm-arm/arch-at91/uncompress.h
 create mode 100644 include/asm-arm/arch-at91/vmalloc.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_aic.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_dbgu.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_ecc.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_lcdc.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_mci.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_pdc.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_pio.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_pit.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_pmc.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_rstc.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_rtc.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_rtt.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_shdwc.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_spi.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_ssc.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_st.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_tc.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_twi.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_wdt.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91rm9200.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91rm9200_emac.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91rm9200_mc.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91sam9260.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91sam9261.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/board.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/cpu.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/debug-macro.S
 delete mode 100644 include/asm-arm/arch-at91rm9200/dma.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/entry-macro.S
 delete mode 100644 include/asm-arm/arch-at91rm9200/gpio.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/hardware.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/io.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/irqs.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/memory.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/system.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/timex.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/uncompress.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/vmalloc.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6783c2e..9c7565c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -377,7 +377,7 @@ source "arch/arm/mach-aaec2000/Kconfig"
 
 source "arch/arm/mach-realview/Kconfig"
 
-source "arch/arm/mach-at91rm9200/Kconfig"
+source "arch/arm/mach-at91/Kconfig"
 
 source "arch/arm/mach-netx/Kconfig"
 
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 000f110..0205547 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -124,7 +124,7 @@ endif
  machine-$(CONFIG_ARCH_H720X)	   := h720x
  machine-$(CONFIG_ARCH_AAEC2000)   := aaec2000
  machine-$(CONFIG_ARCH_REALVIEW)   := realview
- machine-$(CONFIG_ARCH_AT91)       := at91rm9200
+ machine-$(CONFIG_ARCH_AT91)       := at91
  machine-$(CONFIG_ARCH_EP93XX)     := ep93xx
  machine-$(CONFIG_ARCH_PNX4008)    := pnx4008
  machine-$(CONFIG_ARCH_NETX)       := netx
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
new file mode 100644
index 0000000..9f11db8
--- /dev/null
+++ b/arch/arm/mach-at91/Kconfig
@@ -0,0 +1,148 @@
+if ARCH_AT91
+
+menu "Atmel AT91 System-on-Chip"
+
+choice
+	prompt "Atmel AT91 Processor"
+
+config ARCH_AT91RM9200
+	bool "AT91RM9200"
+
+config ARCH_AT91SAM9260
+	bool "AT91SAM9260"
+
+config ARCH_AT91SAM9261
+	bool "AT91SAM9261"
+
+endchoice
+
+# ----------------------------------------------------------
+
+if ARCH_AT91RM9200
+
+comment "AT91RM9200 Board Type"
+
+config MACH_ONEARM
+	bool "Ajeco 1ARM Single Board Computer"
+	depends on ARCH_AT91RM9200
+	help
+	  Select this if you are using Ajeco's 1ARM Single Board Computer.
+	  <http://www.ajeco.fi/products.htm>
+
+config ARCH_AT91RM9200DK
+	bool "Atmel AT91RM9200-DK Development board"
+	depends on ARCH_AT91RM9200
+	help
+	  Select this if you are using Atmel's AT91RM9200-DK Development board.
+	  (Discontinued)
+
+config MACH_AT91RM9200EK
+	bool "Atmel AT91RM9200-EK Evaluation Kit"
+	depends on ARCH_AT91RM9200
+	help
+	  Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
+
+config MACH_CSB337
+	bool "Cogent CSB337"
+	depends on ARCH_AT91RM9200
+	help
+	  Select this if you are using Cogent's CSB337 board.
+	  <http://www.cogcomp.com/csb_csb337.htm>
+
+config MACH_CSB637
+	bool "Cogent CSB637"
+	depends on ARCH_AT91RM9200
+	help
+	  Select this if you are using Cogent's CSB637 board.
+	  <http://www.cogcomp.com/csb_csb637.htm>
+
+config MACH_CARMEVA
+	bool "Conitec ARM&EVA"
+	depends on ARCH_AT91RM9200
+	help
+	  Select this if you are using Conitec's AT91RM9200-MCU-Module.
+	  <http://www.conitec.net/english/linuxboard.htm>
+
+config MACH_ATEB9200
+	bool "Embest ATEB9200"
+	depends on ARCH_AT91RM9200
+	help
+	  Select this if you are using Embest's ATEB9200 board.
+	  <http://www.embedinfo.com/english/product/ATEB9200.asp>
+
+config MACH_KB9200
+	bool "KwikByte KB920x"
+	depends on ARCH_AT91RM9200
+	help
+	  Select this if you are using KwikByte's KB920x board.
+	  <http://kwikbyte.com/KB9202_description_new.htm>
+
+config MACH_KAFA
+	bool "Sperry-Sun KAFA board"
+	depends on ARCH_AT91RM9200
+	help
+	  Select this if you are using Sperry-Sun's KAFA board.
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9260
+
+comment "AT91SAM9260 Board Type"
+
+config MACH_AT91SAM9260EK
+	bool "Atmel AT91SAM9260-EK Evaluation Kit"
+	depends on ARCH_AT91SAM9260
+	help
+	  Select this if you are using Atmel's AT91SAM9260-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9261
+
+comment "AT91SAM9261 Board Type"
+
+config MACH_AT91SAM9261EK
+	bool "Atmel AT91SAM9261-EK Evaluation Kit"
+	depends on ARCH_AT91SAM9261
+	help
+	  Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
+
+endif
+
+# ----------------------------------------------------------
+
+comment "AT91 Board Options"
+
+config MTD_AT91_DATAFLASH_CARD
+	bool "Enable DataFlash Card support"
+	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK)
+	help
+	  Enable support for the DataFlash card.
+
+config MTD_NAND_AT91_BUSWIDTH_16
+	bool "Enable 16-bit data bus interface to NAND flash"
+	depends on (MACH_AT91SAM9261EK || MACH_AT91SAM9260EK)
+	help
+	  On AT91SAM926x boards both types of NAND flash can be present
+	  (8 and 16 bit data bus width).
+
+# ----------------------------------------------------------
+
+comment "AT91 Feature Selections"
+
+config AT91_PROGRAMMABLE_CLOCKS
+	bool "Programmable Clocks"
+	help
+	  Select this if you need to program one or more of the PCK0..PCK3
+	  programmable clock outputs.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
new file mode 100644
index 0000000..cf77700
--- /dev/null
+++ b/arch/arm/mach-at91/Makefile
@@ -0,0 +1,49 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y		:= clock.o irq.o gpio.o
+obj-m		:=
+obj-n		:=
+obj-		:=
+
+obj-$(CONFIG_PM)		+= pm.o
+
+# CPU-specific support
+obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
+
+# AT91RM9200 board-specific support
+obj-$(CONFIG_MACH_ONEARM)	+= board-1arm.o
+obj-$(CONFIG_ARCH_AT91RM9200DK)	+= board-dk.o
+obj-$(CONFIG_MACH_AT91RM9200EK)	+= board-ek.o
+obj-$(CONFIG_MACH_CSB337)	+= board-csb337.o
+obj-$(CONFIG_MACH_CSB637)	+= board-csb637.o
+obj-$(CONFIG_MACH_CARMEVA)	+= board-carmeva.o
+obj-$(CONFIG_MACH_KB9200)	+= board-kb9202.o
+obj-$(CONFIG_MACH_ATEB9200)	+= board-eb9200.o
+obj-$(CONFIG_MACH_KAFA)		+= board-kafa.o
+
+# AT91SAM9260 board-specific support
+obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
+
+# AT91SAM9261 board-specific support
+obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
+
+# LEDs support
+led-$(CONFIG_ARCH_AT91RM9200DK)	+= leds.o
+led-$(CONFIG_MACH_AT91RM9200EK)	+= leds.o
+led-$(CONFIG_MACH_CSB337)	+= leds.o
+led-$(CONFIG_MACH_CSB637)	+= leds.o
+led-$(CONFIG_MACH_KB9200)	+= leds.o
+led-$(CONFIG_MACH_KAFA)		+= leds.o
+obj-$(CONFIG_LEDS) += $(led-y)
+
+# VGA support
+#obj-$(CONFIG_FB_S1D13XXX)	+= ics1523.o
+
+
+ifeq ($(CONFIG_PM_DEBUG),y)
+CFLAGS_pm.o += -DDEBUG
+endif
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
new file mode 100644
index 0000000..e667dcc
--- /dev/null
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -0,0 +1,9 @@
+# Note: the following conditions must always be true:
+#   ZRELADDR == virt_to_phys(TEXTADDR)
+#   PARAMS_PHYS must be within 4MB of ZRELADDR
+#   INITRD_PHYS must be in RAM
+
+   zreladdr-y	:= 0x20008000
+params_phys-y	:= 0x20000100
+initrd_phys-y	:= 0x20410000
+
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
new file mode 100644
index 0000000..870d4a4
--- /dev/null
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -0,0 +1,294 @@
+/*
+ * arch/arm/mach-at91/at91rm9200.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/at91rm9200.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_st.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91rm9200_io_desc[] __initdata = {
+	{
+		.virtual	= AT91_VA_BASE_SYS,
+		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= AT91_VA_BASE_EMAC,
+		.pfn		= __phys_to_pfn(AT91RM9200_BASE_EMAC),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE,
+		.pfn		= __phys_to_pfn(AT91RM9200_SRAM_BASE),
+		.length		= AT91RM9200_SRAM_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+/* --------------------------------------------------------------------
+ *  Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk udc_clk = {
+	.name		= "udc_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_UDP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+	.name		= "ohci_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_UHP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ether_clk = {
+	.name		= "ether_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_EMAC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc_clk = {
+	.name		= "mci_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_MCI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi_clk = {
+	.name		= "twi_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TWI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+	.name		= "usart0_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_US0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+	.name		= "usart1_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_US1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+	.name		= "usart2_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_US2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart3_clk = {
+	.name		= "usart3_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_US3,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi_clk = {
+	.name		= "spi_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_SPI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioA_clk = {
+	.name		= "pioA_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_PIOA,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+	.name		= "pioB_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_PIOB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+	.name		= "pioC_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_PIOC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioD_clk = {
+	.name		= "pioD_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_PIOD,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+	&pioA_clk,
+	&pioB_clk,
+	&pioC_clk,
+	&pioD_clk,
+	&usart0_clk,
+	&usart1_clk,
+	&usart2_clk,
+	&usart3_clk,
+	&mmc_clk,
+	&udc_clk,
+	&twi_clk,
+	&spi_clk,
+	// ssc 0 .. ssc2
+	// tc0 .. tc5
+	&ohci_clk,
+	&ether_clk,
+	// irq0 .. irq6
+};
+
+/*
+ * The four programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+	.name		= "pck0",
+	.pmc_mask	= AT91_PMC_PCK0,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 0,
+};
+static struct clk pck1 = {
+	.name		= "pck1",
+	.pmc_mask	= AT91_PMC_PCK1,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 1,
+};
+static struct clk pck2 = {
+	.name		= "pck2",
+	.pmc_mask	= AT91_PMC_PCK2,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 2,
+};
+static struct clk pck3 = {
+	.name		= "pck3",
+	.pmc_mask	= AT91_PMC_PCK3,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 3,
+};
+
+static void __init at91rm9200_register_clocks(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+		clk_register(periph_clocks[i]);
+
+	clk_register(&pck0);
+	clk_register(&pck1);
+	clk_register(&pck2);
+	clk_register(&pck3);
+}
+
+/* --------------------------------------------------------------------
+ *  GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91rm9200_gpio[] = {
+	{
+		.id		= AT91RM9200_ID_PIOA,
+		.offset		= AT91_PIOA,
+		.clock		= &pioA_clk,
+	}, {
+		.id		= AT91RM9200_ID_PIOB,
+		.offset		= AT91_PIOB,
+		.clock		= &pioB_clk,
+	}, {
+		.id		= AT91RM9200_ID_PIOC,
+		.offset		= AT91_PIOC,
+		.clock		= &pioC_clk,
+	}, {
+		.id		= AT91RM9200_ID_PIOD,
+		.offset		= AT91_PIOD,
+		.clock		= &pioD_clk,
+	}
+};
+
+static void at91rm9200_reset(void)
+{
+	/*
+	 * Perform a hardware reset with the use of the Watchdog timer.
+	 */
+	at91_sys_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1);
+	at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
+}
+
+
+/* --------------------------------------------------------------------
+ *  AT91RM9200 processor initialization
+ * -------------------------------------------------------------------- */
+void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks)
+{
+	/* Map peripherals */
+	iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
+
+	at91_arch_reset = at91rm9200_reset;
+	at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
+			| (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
+			| (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5)
+			| (1 << AT91RM9200_ID_IRQ6);
+
+	/* Init clock subsystem */
+	at91_clock_init(main_clock);
+
+	/* Register the processor-specific clocks */
+	at91rm9200_register_clocks();
+
+	/* Initialize GPIO subsystem */
+	at91_gpio_init(at91rm9200_gpio, banks);
+}
+
+
+/* --------------------------------------------------------------------
+ *  Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
+	7,	/* Advanced Interrupt Controller (FIQ) */
+	7,	/* System Peripherals */
+	0,	/* Parallel IO Controller A */
+	0,	/* Parallel IO Controller B */
+	0,	/* Parallel IO Controller C */
+	0,	/* Parallel IO Controller D */
+	6,	/* USART 0 */
+	6,	/* USART 1 */
+	6,	/* USART 2 */
+	6,	/* USART 3 */
+	0,	/* Multimedia Card Interface */
+	4,	/* USB Device Port */
+	0,	/* Two-Wire Interface */
+	6,	/* Serial Peripheral Interface */
+	5,	/* Serial Synchronous Controller 0 */
+	5,	/* Serial Synchronous Controller 1 */
+	5,	/* Serial Synchronous Controller 2 */
+	0,	/* Timer Counter 0 */
+	0,	/* Timer Counter 1 */
+	0,	/* Timer Counter 2 */
+	0,	/* Timer Counter 3 */
+	0,	/* Timer Counter 4 */
+	0,	/* Timer Counter 5 */
+	3,	/* USB Host port */
+	3,	/* Ethernet MAC */
+	0,	/* Advanced Interrupt Controller (IRQ0) */
+	0,	/* Advanced Interrupt Controller (IRQ1) */
+	0,	/* Advanced Interrupt Controller (IRQ2) */
+	0,	/* Advanced Interrupt Controller (IRQ3) */
+	0,	/* Advanced Interrupt Controller (IRQ4) */
+	0,	/* Advanced Interrupt Controller (IRQ5) */
+	0	/* Advanced Interrupt Controller (IRQ6) */
+};
+
+void __init at91rm9200_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+	if (!priority)
+		priority = at91rm9200_default_irq_priority;
+
+	/* Initialize the AIC interrupt controller */
+	at91_aic_init(priority);
+
+	/* Enable GPIO interrupts */
+	at91_gpio_irq_setup();
+}
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
new file mode 100644
index 0000000..a06498c
--- /dev/null
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -0,0 +1,875 @@
+/*
+ * arch/arm/mach-at91/at91rm9200_devices.c
+ *
+ *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ *  Copyright (C) 2005 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_device.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91rm9200.h>
+#include <asm/arch/at91rm9200_mc.h>
+
+#include "generic.h"
+
+#define SZ_512	0x00000200
+#define SZ_256	0x00000100
+#define SZ_16	0x00000010
+
+/* --------------------------------------------------------------------
+ *  USB Host
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = 0xffffffffUL;
+static struct at91_usbh_data usbh_data;
+
+static struct resource usbh_resources[] = {
+	[0] = {
+		.start	= AT91RM9200_UHP_BASE,
+		.end	= AT91RM9200_UHP_BASE + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91RM9200_ID_UHP,
+		.end	= AT91RM9200_ID_UHP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91rm9200_usbh_device = {
+	.name		= "at91_ohci",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &ohci_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &usbh_data,
+	},
+	.resource	= usbh_resources,
+	.num_resources	= ARRAY_SIZE(usbh_resources),
+};
+
+void __init at91_add_device_usbh(struct at91_usbh_data *data)
+{
+	if (!data)
+		return;
+
+	usbh_data = *data;
+	platform_device_register(&at91rm9200_usbh_device);
+}
+#else
+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  USB Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_USB_GADGET_AT91
+static struct at91_udc_data udc_data;
+
+static struct resource udc_resources[] = {
+	[0] = {
+		.start	= AT91RM9200_BASE_UDP,
+		.end	= AT91RM9200_BASE_UDP + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91RM9200_ID_UDP,
+		.end	= AT91RM9200_ID_UDP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91rm9200_udc_device = {
+	.name		= "at91_udc",
+	.id		= -1,
+	.dev		= {
+				.platform_data		= &udc_data,
+	},
+	.resource	= udc_resources,
+	.num_resources	= ARRAY_SIZE(udc_resources),
+};
+
+void __init at91_add_device_udc(struct at91_udc_data *data)
+{
+	if (!data)
+		return;
+
+	if (data->vbus_pin) {
+		at91_set_gpio_input(data->vbus_pin, 0);
+		at91_set_deglitch(data->vbus_pin, 1);
+	}
+	if (data->pullup_pin)
+		at91_set_gpio_output(data->pullup_pin, 0);
+
+	udc_data = *data;
+	platform_device_register(&at91rm9200_udc_device);
+}
+#else
+void __init at91_add_device_udc(struct at91_udc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE)
+static u64 eth_dmamask = 0xffffffffUL;
+static struct at91_eth_data eth_data;
+
+static struct resource eth_resources[] = {
+	[0] = {
+		.start	= AT91_VA_BASE_EMAC,
+		.end	= AT91_VA_BASE_EMAC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91RM9200_ID_EMAC,
+		.end	= AT91RM9200_ID_EMAC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91rm9200_eth_device = {
+	.name		= "at91_ether",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &eth_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &eth_data,
+	},
+	.resource	= eth_resources,
+	.num_resources	= ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct at91_eth_data *data)
+{
+	if (!data)
+		return;
+
+	if (data->phy_irq_pin) {
+		at91_set_gpio_input(data->phy_irq_pin, 0);
+		at91_set_deglitch(data->phy_irq_pin, 1);
+	}
+
+	/* Pins used for MII and RMII */
+	at91_set_A_periph(AT91_PIN_PA16, 0);	/* EMDIO */
+	at91_set_A_periph(AT91_PIN_PA15, 0);	/* EMDC */
+	at91_set_A_periph(AT91_PIN_PA14, 0);	/* ERXER */
+	at91_set_A_periph(AT91_PIN_PA13, 0);	/* ERX1 */
+	at91_set_A_periph(AT91_PIN_PA12, 0);	/* ERX0 */
+	at91_set_A_periph(AT91_PIN_PA11, 0);	/* ECRS_ECRSDV */
+	at91_set_A_periph(AT91_PIN_PA10, 0);	/* ETX1 */
+	at91_set_A_periph(AT91_PIN_PA9, 0);	/* ETX0 */
+	at91_set_A_periph(AT91_PIN_PA8, 0);	/* ETXEN */
+	at91_set_A_periph(AT91_PIN_PA7, 0);	/* ETXCK_EREFCK */
+
+	if (!data->is_rmii) {
+		at91_set_B_periph(AT91_PIN_PB19, 0);	/* ERXCK */
+		at91_set_B_periph(AT91_PIN_PB18, 0);	/* ECOL */
+		at91_set_B_periph(AT91_PIN_PB17, 0);	/* ERXDV */
+		at91_set_B_periph(AT91_PIN_PB16, 0);	/* ERX3 */
+		at91_set_B_periph(AT91_PIN_PB15, 0);	/* ERX2 */
+		at91_set_B_periph(AT91_PIN_PB14, 0);	/* ETXER */
+		at91_set_B_periph(AT91_PIN_PB13, 0);	/* ETX3 */
+		at91_set_B_periph(AT91_PIN_PB12, 0);	/* ETX2 */
+	}
+
+	eth_data = *data;
+	platform_device_register(&at91rm9200_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  Compact Flash / PCMCIA
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
+static struct at91_cf_data cf_data;
+
+#define CF_BASE		AT91_CHIPSELECT_4
+
+static struct resource cf_resources[] = {
+	[0] = {
+		.start	= CF_BASE,
+		/* ties up CS4, CS5 and CS6 */
+		.end	= CF_BASE + (0x30000000 - 1),
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+	},
+};
+
+static struct platform_device at91rm9200_cf_device = {
+	.name		= "at91_cf",
+	.id		= -1,
+	.dev		= {
+				.platform_data		= &cf_data,
+	},
+	.resource	= cf_resources,
+	.num_resources	= ARRAY_SIZE(cf_resources),
+};
+
+void __init at91_add_device_cf(struct at91_cf_data *data)
+{
+	unsigned int csa;
+
+	if (!data)
+		return;
+
+	data->chipselect = 4;		/* can only use EBI ChipSelect 4 */
+
+	/* CF takes over CS4, CS5, CS6 */
+	csa = at91_sys_read(AT91_EBI_CSA);
+	at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS4A_SMC_COMPACTFLASH);
+
+	/*
+	 * Static memory controller timing adjustments.
+	 * REVISIT:  these timings are in terms of MCK cycles, so
+	 * when MCK changes (cpufreq etc) so must these values...
+	 */
+	at91_sys_write(AT91_SMC_CSR(4),
+				  AT91_SMC_ACSS_STD
+				| AT91_SMC_DBW_16
+				| AT91_SMC_BAT
+				| AT91_SMC_WSEN
+				| AT91_SMC_NWS_(32)	/* wait states */
+				| AT91_SMC_RWSETUP_(6)	/* setup time */
+				| AT91_SMC_RWHOLD_(4)	/* hold time */
+	);
+
+	/* input/irq */
+	if (data->irq_pin) {
+		at91_set_gpio_input(data->irq_pin, 1);
+		at91_set_deglitch(data->irq_pin, 1);
+	}
+	at91_set_gpio_input(data->det_pin, 1);
+	at91_set_deglitch(data->det_pin, 1);
+
+	/* outputs, initially off */
+	if (data->vcc_pin)
+		at91_set_gpio_output(data->vcc_pin, 0);
+	at91_set_gpio_output(data->rst_pin, 0);
+
+	/* force poweron defaults for these pins ... */
+	at91_set_A_periph(AT91_PIN_PC9, 0);	/* A25/CFRNW */
+	at91_set_A_periph(AT91_PIN_PC10, 0);	/* NCS4/CFCS */
+	at91_set_A_periph(AT91_PIN_PC11, 0);	/* NCS5/CFCE1 */
+	at91_set_A_periph(AT91_PIN_PC12, 0);	/* NCS6/CFCE2 */
+
+	/* nWAIT is _not_ a default setting */
+	at91_set_A_periph(AT91_PIN_PC6, 1);	/* nWAIT */
+
+	cf_data = *data;
+	platform_device_register(&at91rm9200_cf_device);
+}
+#else
+void __init at91_add_device_cf(struct at91_cf_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = 0xffffffffUL;
+static struct at91_mmc_data mmc_data;
+
+static struct resource mmc_resources[] = {
+	[0] = {
+		.start	= AT91RM9200_BASE_MCI,
+		.end	= AT91RM9200_BASE_MCI + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91RM9200_ID_MCI,
+		.end	= AT91RM9200_ID_MCI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91rm9200_mmc_device = {
+	.name		= "at91_mci",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &mmc_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &mmc_data,
+	},
+	.resource	= mmc_resources,
+	.num_resources	= ARRAY_SIZE(mmc_resources),
+};
+
+void __init at91_add_device_mmc(struct at91_mmc_data *data)
+{
+	if (!data)
+		return;
+
+	/* input/irq */
+	if (data->det_pin) {
+		at91_set_gpio_input(data->det_pin, 1);
+		at91_set_deglitch(data->det_pin, 1);
+	}
+	if (data->wp_pin)
+		at91_set_gpio_input(data->wp_pin, 1);
+	if (data->vcc_pin)
+		at91_set_gpio_output(data->vcc_pin, 0);
+
+	/* CLK */
+	at91_set_A_periph(AT91_PIN_PA27, 0);
+
+	if (data->slot_b) {
+		/* CMD */
+		at91_set_B_periph(AT91_PIN_PA8, 1);
+
+		/* DAT0, maybe DAT1..DAT3 */
+		at91_set_B_periph(AT91_PIN_PA9, 1);
+		if (data->wire4) {
+			at91_set_B_periph(AT91_PIN_PA10, 1);
+			at91_set_B_periph(AT91_PIN_PA11, 1);
+			at91_set_B_periph(AT91_PIN_PA12, 1);
+		}
+	} else {
+		/* CMD */
+		at91_set_A_periph(AT91_PIN_PA28, 1);
+
+		/* DAT0, maybe DAT1..DAT3 */
+		at91_set_A_periph(AT91_PIN_PA29, 1);
+		if (data->wire4) {
+			at91_set_B_periph(AT91_PIN_PB3, 1);
+			at91_set_B_periph(AT91_PIN_PB4, 1);
+			at91_set_B_periph(AT91_PIN_PB5, 1);
+		}
+	}
+
+	mmc_data = *data;
+	platform_device_register(&at91rm9200_mmc_device);
+}
+#else
+void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+static struct at91_nand_data nand_data;
+
+#define NAND_BASE	AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+	{
+		.start	= NAND_BASE,
+		.end	= NAND_BASE + SZ_8M - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device at91rm9200_nand_device = {
+	.name		= "at91_nand",
+	.id		= -1,
+	.dev		= {
+				.platform_data	= &nand_data,
+	},
+	.resource	= nand_resources,
+	.num_resources	= ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct at91_nand_data *data)
+{
+	unsigned int csa;
+
+	if (!data)
+		return;
+
+	/* enable the address range of CS3 */
+	csa = at91_sys_read(AT91_EBI_CSA);
+	at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS3A_SMC_SMARTMEDIA);
+
+	/* set the bus interface characteristics */
+	at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_ACSS_STD | AT91_SMC_DBW_8 | AT91_SMC_WSEN
+		| AT91_SMC_NWS_(5)
+		| AT91_SMC_TDF_(1)
+		| AT91_SMC_RWSETUP_(0)	/* tDS Data Set up Time 30 - ns */
+		| AT91_SMC_RWHOLD_(1)	/* tDH Data Hold Time 20 - ns */
+	);
+
+	/* enable pin */
+	if (data->enable_pin)
+		at91_set_gpio_output(data->enable_pin, 1);
+
+	/* ready/busy pin */
+	if (data->rdy_pin)
+		at91_set_gpio_input(data->rdy_pin, 1);
+
+	/* card detect pin */
+	if (data->det_pin)
+		at91_set_gpio_input(data->det_pin, 1);
+
+	at91_set_A_periph(AT91_PIN_PC1, 0);		/* SMOE */
+	at91_set_A_periph(AT91_PIN_PC3, 0);		/* SMWE */
+
+	nand_data = *data;
+	platform_device_register(&at91rm9200_nand_device);
+}
+#else
+void __init at91_add_device_nand(struct at91_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi_resources[] = {
+	[0] = {
+		.start	= AT91RM9200_BASE_TWI,
+		.end	= AT91RM9200_BASE_TWI + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91RM9200_ID_TWI,
+		.end	= AT91RM9200_ID_TWI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91rm9200_twi_device = {
+	.name		= "at91_i2c",
+	.id		= -1,
+	.resource	= twi_resources,
+	.num_resources	= ARRAY_SIZE(twi_resources),
+};
+
+void __init at91_add_device_i2c(void)
+{
+	/* pins used for TWI interface */
+	at91_set_A_periph(AT91_PIN_PA25, 0);		/* TWD */
+	at91_set_multi_drive(AT91_PIN_PA25, 1);
+
+	at91_set_A_periph(AT91_PIN_PA26, 0);		/* TWCK */
+	at91_set_multi_drive(AT91_PIN_PA26, 1);
+
+	platform_device_register(&at91rm9200_twi_device);
+}
+#else
+void __init at91_add_device_i2c(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) || defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE)
+static u64 spi_dmamask = 0xffffffffUL;
+
+static struct resource spi_resources[] = {
+	[0] = {
+		.start	= AT91RM9200_BASE_SPI,
+		.end	= AT91RM9200_BASE_SPI + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91RM9200_ID_SPI,
+		.end	= AT91RM9200_ID_SPI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91rm9200_spi_device = {
+	.name		= "at91_spi",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+	},
+	.resource	= spi_resources,
+	.num_resources	= ARRAY_SIZE(spi_resources),
+};
+
+static const unsigned spi_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+	int i;
+	unsigned long cs_pin;
+
+	at91_set_A_periph(AT91_PIN_PA0, 0);	/* MISO */
+	at91_set_A_periph(AT91_PIN_PA1, 0);	/* MOSI */
+	at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPCK */
+
+	/* Enable SPI chip-selects */
+	for (i = 0; i < nr_devices; i++) {
+		if (devices[i].controller_data)
+			cs_pin = (unsigned long) devices[i].controller_data;
+		else
+			cs_pin = spi_standard_cs[devices[i].chip_select];
+
+#ifdef CONFIG_SPI_AT91_MANUAL_CS
+		at91_set_gpio_output(cs_pin, 1);
+#else
+		at91_set_A_periph(cs_pin, 0);
+#endif
+
+		/* pass chip-select pin to driver */
+		devices[i].controller_data = (void *) cs_pin;
+	}
+
+	spi_register_board_info(devices, nr_devices);
+	at91_clock_associate("spi_clk", &at91rm9200_spi_device.dev, "spi");
+	platform_device_register(&at91rm9200_spi_device);
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  RTC
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
+static struct platform_device at91rm9200_rtc_device = {
+	.name		= "at91_rtc",
+	.id		= -1,
+	.num_resources	= 0,
+};
+
+static void __init at91_add_device_rtc(void)
+{
+	platform_device_register(&at91rm9200_rtc_device);
+}
+#else
+static void __init at91_add_device_rtc(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91RM9200_WATCHDOG) || defined(CONFIG_AT91RM9200_WATCHDOG_MODULE)
+static struct platform_device at91rm9200_wdt_device = {
+	.name		= "at91_wdt",
+	.id		= -1,
+	.num_resources	= 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+	platform_device_register(&at91rm9200_wdt_device);
+}
+#else
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  LEDs
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_LEDS)
+u8 at91_leds_cpu;
+u8 at91_leds_timer;
+
+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+{
+	at91_leds_cpu	= cpu_led;
+	at91_leds_timer	= timer_led;
+}
+#else
+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+	[0] = {
+		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
+		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_ID_SYS,
+		.end	= AT91_ID_SYS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data dbgu_data = {
+	.use_dma_tx	= 0,
+	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
+	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static struct platform_device at91rm9200_dbgu_device = {
+	.name		= "atmel_usart",
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &dbgu_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= dbgu_resources,
+	.num_resources	= ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PA30, 0);		/* DRXD */
+	at91_set_A_periph(AT91_PIN_PA31, 1);		/* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+	[0] = {
+		.start	= AT91RM9200_BASE_US0,
+		.end	= AT91RM9200_BASE_US0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91RM9200_ID_US0,
+		.end	= AT91RM9200_ID_US0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart0_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91rm9200_uart0_device = {
+	.name		= "atmel_usart",
+	.id		= 1,
+	.dev		= {
+				.platform_data	= &uart0_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart0_resources,
+	.num_resources	= ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PA17, 1);		/* TXD0 */
+	at91_set_A_periph(AT91_PIN_PA18, 0);		/* RXD0 */
+	at91_set_A_periph(AT91_PIN_PA20, 0);		/* CTS0 */
+
+	/*
+	 * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21.
+	 *  We need to drive the pin manually.  Default is off (RTS is active low).
+	 */
+	at91_set_gpio_output(AT91_PIN_PA21, 1);
+}
+
+static struct resource uart1_resources[] = {
+	[0] = {
+		.start	= AT91RM9200_BASE_US1,
+		.end	= AT91RM9200_BASE_US1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91RM9200_ID_US1,
+		.end	= AT91RM9200_ID_US1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart1_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91rm9200_uart1_device = {
+	.name		= "atmel_usart",
+	.id		= 2,
+	.dev		= {
+				.platform_data	= &uart1_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart1_resources,
+	.num_resources	= ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PB18, 0);		/* RI1 */
+	at91_set_A_periph(AT91_PIN_PB19, 0);		/* DTR1 */
+	at91_set_A_periph(AT91_PIN_PB20, 1);		/* TXD1 */
+	at91_set_A_periph(AT91_PIN_PB21, 0);		/* RXD1 */
+	at91_set_A_periph(AT91_PIN_PB23, 0);		/* DCD1 */
+	at91_set_A_periph(AT91_PIN_PB24, 0);		/* CTS1 */
+	at91_set_A_periph(AT91_PIN_PB25, 0);		/* DSR1 */
+	at91_set_A_periph(AT91_PIN_PB26, 0);		/* RTS1 */
+}
+
+static struct resource uart2_resources[] = {
+	[0] = {
+		.start	= AT91RM9200_BASE_US2,
+		.end	= AT91RM9200_BASE_US2 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91RM9200_ID_US2,
+		.end	= AT91RM9200_ID_US2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart2_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91rm9200_uart2_device = {
+	.name		= "atmel_usart",
+	.id		= 3,
+	.dev		= {
+				.platform_data	= &uart2_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart2_resources,
+	.num_resources	= ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PA22, 0);		/* RXD2 */
+	at91_set_A_periph(AT91_PIN_PA23, 1);		/* TXD2 */
+}
+
+static struct resource uart3_resources[] = {
+	[0] = {
+		.start	= AT91RM9200_BASE_US3,
+		.end	= AT91RM9200_BASE_US3 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91RM9200_ID_US3,
+		.end	= AT91RM9200_ID_US3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart3_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91rm9200_uart3_device = {
+	.name		= "atmel_usart",
+	.id		= 4,
+	.dev		= {
+				.platform_data	= &uart3_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart3_resources,
+	.num_resources	= ARRAY_SIZE(uart3_resources),
+};
+
+static inline void configure_usart3_pins(void)
+{
+	at91_set_B_periph(AT91_PIN_PA5, 1);		/* TXD3 */
+	at91_set_B_periph(AT91_PIN_PA6, 0);		/* RXD3 */
+}
+
+struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
+struct platform_device *atmel_default_console_device;	/* the serial console device */
+
+void __init at91_init_serial(struct at91_uart_config *config)
+{
+	int i;
+
+	/* Fill in list of supported UARTs */
+	for (i = 0; i < config->nr_tty; i++) {
+		switch (config->tty_map[i]) {
+			case 0:
+				configure_usart0_pins();
+				at91_uarts[i] = &at91rm9200_uart0_device;
+				at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart");
+				break;
+			case 1:
+				configure_usart1_pins();
+				at91_uarts[i] = &at91rm9200_uart1_device;
+				at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart");
+				break;
+			case 2:
+				configure_usart2_pins();
+				at91_uarts[i] = &at91rm9200_uart2_device;
+				at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart");
+				break;
+			case 3:
+				configure_usart3_pins();
+				at91_uarts[i] = &at91rm9200_uart3_device;
+				at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart");
+				break;
+			case 4:
+				configure_dbgu_pins();
+				at91_uarts[i] = &at91rm9200_dbgu_device;
+				at91_clock_associate("mck", &at91rm9200_dbgu_device.dev, "usart");
+				break;
+			default:
+				continue;
+		}
+		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
+	}
+
+	/* Set serial console device */
+	if (config->console_tty < ATMEL_MAX_UART)
+		atmel_default_console_device = at91_uarts[config->console_tty];
+	if (!atmel_default_console_device)
+		printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+void __init at91_add_device_serial(void)
+{
+	int i;
+
+	for (i = 0; i < ATMEL_MAX_UART; i++) {
+		if (at91_uarts[i])
+			platform_device_register(at91_uarts[i]);
+	}
+}
+#else
+void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+	at91_add_device_rtc();
+	at91_add_device_watchdog();
+	return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
new file mode 100644
index 0000000..949199a
--- /dev/null
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -0,0 +1,146 @@
+/*
+ * linux/arch/arm/mach-at91/at91rm9200_time.c
+ *
+ *  Copyright (C) 2003 SAN People
+ *  Copyright (C) 2003 ATMEL
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/mach/time.h>
+
+#include <asm/arch/at91_st.h>
+
+static unsigned long last_crtr;
+
+/*
+ * The ST_CRTR is updated asynchronously to the master clock.  It is therefore
+ *  necessary to read it twice (with the same value) to ensure accuracy.
+ */
+static inline unsigned long read_CRTR(void) {
+	unsigned long x1, x2;
+
+	do {
+		x1 = at91_sys_read(AT91_ST_CRTR);
+		x2 = at91_sys_read(AT91_ST_CRTR);
+	} while (x1 != x2);
+
+	return x1;
+}
+
+/*
+ * Returns number of microseconds since last timer interrupt.  Note that interrupts
+ * will have been disabled by do_gettimeofday()
+ *  'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
+ *  'tick' is usecs per jiffy (linux/timex.h).
+ */
+static unsigned long at91rm9200_gettimeoffset(void)
+{
+	unsigned long elapsed;
+
+	elapsed = (read_CRTR() - last_crtr) & AT91_ST_ALMV;
+
+	return (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH;
+}
+
+/*
+ * IRQ handler for the timer.
+ */
+static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
+{
+	if (at91_sys_read(AT91_ST_SR) & AT91_ST_PITS) {	/* This is a shared interrupt */
+		write_seqlock(&xtime_lock);
+
+		while (((read_CRTR() - last_crtr) & AT91_ST_ALMV) >= LATCH) {
+			timer_tick();
+			last_crtr = (last_crtr + LATCH) & AT91_ST_ALMV;
+		}
+
+		write_sequnlock(&xtime_lock);
+
+		return IRQ_HANDLED;
+	}
+	else
+		return IRQ_NONE;		/* not handled */
+}
+
+static struct irqaction at91rm9200_timer_irq = {
+	.name		= "at91_tick",
+	.flags		= IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER,
+	.handler	= at91rm9200_timer_interrupt
+};
+
+void at91rm9200_timer_reset(void)
+{
+	last_crtr = 0;
+
+	/* Real time counter incremented every 30.51758 microseconds */
+	at91_sys_write(AT91_ST_RTMR, 1);
+
+	/* Set Period Interval timer */
+	at91_sys_write(AT91_ST_PIMR, LATCH);
+
+	/* Clear any pending interrupts */
+	(void) at91_sys_read(AT91_ST_SR);
+
+	/* Enable Period Interval Timer interrupt */
+	at91_sys_write(AT91_ST_IER, AT91_ST_PITS);
+}
+
+/*
+ * Set up timer interrupt.
+ */
+void __init at91rm9200_timer_init(void)
+{
+	/* Disable all timer interrupts */
+	at91_sys_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS);
+	(void) at91_sys_read(AT91_ST_SR);	/* Clear any pending interrupts */
+
+	/* Make IRQs happen for the system timer */
+	setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq);
+
+	/* Change the kernel's 'tick' value to 10009 usec. (the default is 10000) */
+	tick_usec = (LATCH * 1000000) / CLOCK_TICK_RATE;
+
+	/* Initialize and enable the timer interrupt */
+	at91rm9200_timer_reset();
+}
+
+#ifdef CONFIG_PM
+static void at91rm9200_timer_suspend(void)
+{
+	/* disable Period Interval Timer interrupt */
+	at91_sys_write(AT91_ST_IDR, AT91_ST_PITS);
+}
+#else
+#define at91rm9200_timer_suspend	NULL
+#endif
+
+struct sys_timer at91rm9200_timer = {
+	.init		= at91rm9200_timer_init,
+	.offset		= at91rm9200_gettimeoffset,
+	.suspend	= at91rm9200_timer_suspend,
+	.resume		= at91rm9200_timer_reset,
+};
+
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
new file mode 100644
index 0000000..ffc4c09
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -0,0 +1,295 @@
+/*
+ * arch/arm/mach-at91/at91sam9260.c
+ *
+ *  Copyright (C) 2006 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/at91sam9260.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91sam9260_io_desc[] __initdata = {
+	{
+		.virtual	= AT91_VA_BASE_SYS,
+		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9260_SRAM0_BASE),
+		.length		= AT91SAM9260_SRAM0_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE - AT91SAM9260_SRAM1_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9260_SRAM1_BASE),
+		.length		= AT91SAM9260_SRAM1_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+/* --------------------------------------------------------------------
+ *  Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+	.name		= "pioA_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_PIOA,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+	.name		= "pioB_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_PIOB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+	.name		= "pioC_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_PIOC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk adc_clk = {
+	.name		= "adc_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_ADC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+	.name		= "usart0_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_US0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+	.name		= "usart1_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_US1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+	.name		= "usart2_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_US2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc_clk = {
+	.name		= "mci_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_MCI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk udc_clk = {
+	.name		= "udc_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_UDP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi_clk = {
+	.name		= "twi_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TWI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+	.name		= "spi0_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_SPI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+	.name		= "spi1_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_SPI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+	.name		= "ohci_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_UHP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ether_clk = {
+	.name		= "ether_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_EMAC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk isi_clk = {
+	.name		= "isi_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_ISI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart3_clk = {
+	.name		= "usart3_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_US3,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart4_clk = {
+	.name		= "usart4_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_US4,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart5_clk = {
+	.name		= "usart5_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_US5,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+	&pioA_clk,
+	&pioB_clk,
+	&pioC_clk,
+	&adc_clk,
+	&usart0_clk,
+	&usart1_clk,
+	&usart2_clk,
+	&mmc_clk,
+	&udc_clk,
+	&twi_clk,
+	&spi0_clk,
+	&spi1_clk,
+	// ssc
+	// tc0 .. tc2
+	&ohci_clk,
+	&ether_clk,
+	&isi_clk,
+	&usart3_clk,
+	&usart4_clk,
+	&usart5_clk,
+	// tc3 .. tc5
+	// irq0 .. irq2
+};
+
+/*
+ * The two programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+	.name		= "pck0",
+	.pmc_mask	= AT91_PMC_PCK0,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 0,
+};
+static struct clk pck1 = {
+	.name		= "pck1",
+	.pmc_mask	= AT91_PMC_PCK1,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 1,
+};
+
+static void __init at91sam9260_register_clocks(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+		clk_register(periph_clocks[i]);
+
+	clk_register(&pck0);
+	clk_register(&pck1);
+}
+
+/* --------------------------------------------------------------------
+ *  GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91sam9260_gpio[] = {
+	{
+		.id		= AT91SAM9260_ID_PIOA,
+		.offset		= AT91_PIOA,
+		.clock		= &pioA_clk,
+	}, {
+		.id		= AT91SAM9260_ID_PIOB,
+		.offset		= AT91_PIOB,
+		.clock		= &pioB_clk,
+	}, {
+		.id		= AT91SAM9260_ID_PIOC,
+		.offset		= AT91_PIOC,
+		.clock		= &pioC_clk,
+	}
+};
+
+static void at91sam9260_reset(void)
+{
+	at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+
+/* --------------------------------------------------------------------
+ *  AT91SAM9260 processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91sam9260_initialize(unsigned long main_clock)
+{
+	/* Map peripherals */
+	iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc));
+
+	at91_arch_reset = at91sam9260_reset;
+	at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
+			| (1 << AT91SAM9260_ID_IRQ2);
+
+	/* Init clock subsystem */
+	at91_clock_init(main_clock);
+
+	/* Register the processor-specific clocks */
+	at91sam9260_register_clocks();
+
+	/* Register GPIO subsystem */
+	at91_gpio_init(at91sam9260_gpio, 3);
+}
+
+/* --------------------------------------------------------------------
+ *  Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
+	7,	/* Advanced Interrupt Controller */
+	7,	/* System Peripherals */
+	0,	/* Parallel IO Controller A */
+	0,	/* Parallel IO Controller B */
+	0,	/* Parallel IO Controller C */
+	0,	/* Analog-to-Digital Converter */
+	6,	/* USART 0 */
+	6,	/* USART 1 */
+	6,	/* USART 2 */
+	0,	/* Multimedia Card Interface */
+	4,	/* USB Device Port */
+	0,	/* Two-Wire Interface */
+	6,	/* Serial Peripheral Interface 0 */
+	6,	/* Serial Peripheral Interface 1 */
+	5,	/* Serial Synchronous Controller */
+	0,
+	0,
+	0,	/* Timer Counter 0 */
+	0,	/* Timer Counter 1 */
+	0,	/* Timer Counter 2 */
+	3,	/* USB Host port */
+	3,	/* Ethernet */
+	0,	/* Image Sensor Interface */
+	6,	/* USART 3 */
+	6,	/* USART 4 */
+	6,	/* USART 5 */
+	0,	/* Timer Counter 3 */
+	0,	/* Timer Counter 4 */
+	0,	/* Timer Counter 5 */
+	0,	/* Advanced Interrupt Controller */
+	0,	/* Advanced Interrupt Controller */
+	0,	/* Advanced Interrupt Controller */
+};
+
+void __init at91sam9260_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+	if (!priority)
+		priority = at91sam9260_default_irq_priority;
+
+	/* Initialize the AIC interrupt controller */
+	at91_aic_init(priority);
+
+	/* Enable GPIO interrupts */
+	at91_gpio_irq_setup();
+}
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
new file mode 100644
index 0000000..4adff70
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -0,0 +1,867 @@
+/*
+ * arch/arm/mach-at91/at91sam9260_devices.c
+ *
+ *  Copyright (C) 2006 Atmel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_device.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam9260.h>
+#include <asm/arch/at91sam926x_mc.h>
+#include <asm/arch/at91sam9260_matrix.h>
+
+#include "generic.h"
+
+#define SZ_512	0x00000200
+#define SZ_256	0x00000100
+#define SZ_16	0x00000010
+
+/* --------------------------------------------------------------------
+ *  USB Host
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = 0xffffffffUL;
+static struct at91_usbh_data usbh_data;
+
+static struct resource usbh_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_UHP_BASE,
+		.end	= AT91SAM9260_UHP_BASE + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_UHP,
+		.end	= AT91SAM9260_ID_UHP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_usbh_device = {
+	.name		= "at91_ohci",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &ohci_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &usbh_data,
+	},
+	.resource	= usbh_resources,
+	.num_resources	= ARRAY_SIZE(usbh_resources),
+};
+
+void __init at91_add_device_usbh(struct at91_usbh_data *data)
+{
+	if (!data)
+		return;
+
+	usbh_data = *data;
+	platform_device_register(&at91_usbh_device);
+}
+#else
+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  USB Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_USB_GADGET_AT91
+static struct at91_udc_data udc_data;
+
+static struct resource udc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_UDP,
+		.end	= AT91SAM9260_BASE_UDP + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_UDP,
+		.end	= AT91SAM9260_ID_UDP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_udc_device = {
+	.name		= "at91_udc",
+	.id		= -1,
+	.dev		= {
+				.platform_data		= &udc_data,
+	},
+	.resource	= udc_resources,
+	.num_resources	= ARRAY_SIZE(udc_resources),
+};
+
+void __init at91_add_device_udc(struct at91_udc_data *data)
+{
+	if (!data)
+		return;
+
+	if (data->vbus_pin) {
+		at91_set_gpio_input(data->vbus_pin, 0);
+		at91_set_deglitch(data->vbus_pin, 1);
+	}
+
+	/* Pullup pin is handled internally by USB device peripheral */
+
+	udc_data = *data;
+	platform_device_register(&at91_udc_device);
+}
+#else
+void __init at91_add_device_udc(struct at91_udc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+static u64 eth_dmamask = 0xffffffffUL;
+static struct at91_eth_data eth_data;
+
+static struct resource eth_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_EMAC,
+		.end	= AT91SAM9260_BASE_EMAC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_EMAC,
+		.end	= AT91SAM9260_ID_EMAC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9260_eth_device = {
+	.name		= "macb",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &eth_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &eth_data,
+	},
+	.resource	= eth_resources,
+	.num_resources	= ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct at91_eth_data *data)
+{
+	if (!data)
+		return;
+
+	if (data->phy_irq_pin) {
+		at91_set_gpio_input(data->phy_irq_pin, 0);
+		at91_set_deglitch(data->phy_irq_pin, 1);
+	}
+
+	/* Pins used for MII and RMII */
+	at91_set_A_periph(AT91_PIN_PA19, 0);	/* ETXCK_EREFCK */
+	at91_set_A_periph(AT91_PIN_PA17, 0);	/* ERXDV */
+	at91_set_A_periph(AT91_PIN_PA14, 0);	/* ERX0 */
+	at91_set_A_periph(AT91_PIN_PA15, 0);	/* ERX1 */
+	at91_set_A_periph(AT91_PIN_PA18, 0);	/* ERXER */
+	at91_set_A_periph(AT91_PIN_PA16, 0);	/* ETXEN */
+	at91_set_A_periph(AT91_PIN_PA12, 0);	/* ETX0 */
+	at91_set_A_periph(AT91_PIN_PA13, 0);	/* ETX1 */
+	at91_set_A_periph(AT91_PIN_PA21, 0);	/* EMDIO */
+	at91_set_A_periph(AT91_PIN_PA20, 0);	/* EMDC */
+
+	if (!data->is_rmii) {
+		at91_set_B_periph(AT91_PIN_PA28, 0);	/* ECRS */
+		at91_set_B_periph(AT91_PIN_PA29, 0);	/* ECOL */
+		at91_set_B_periph(AT91_PIN_PA25, 0);	/* ERX2 */
+		at91_set_B_periph(AT91_PIN_PA26, 0);	/* ERX3 */
+		at91_set_B_periph(AT91_PIN_PA27, 0);	/* ERXCK */
+		at91_set_B_periph(AT91_PIN_PA23, 0);	/* ETX2 */
+		at91_set_B_periph(AT91_PIN_PA24, 0);	/* ETX3 */
+		at91_set_B_periph(AT91_PIN_PA22, 0);	/* ETXER */
+	}
+
+	eth_data = *data;
+	platform_device_register(&at91sam9260_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = 0xffffffffUL;
+static struct at91_mmc_data mmc_data;
+
+static struct resource mmc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_MCI,
+		.end	= AT91SAM9260_BASE_MCI + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_MCI,
+		.end	= AT91SAM9260_ID_MCI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9260_mmc_device = {
+	.name		= "at91_mci",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &mmc_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &mmc_data,
+	},
+	.resource	= mmc_resources,
+	.num_resources	= ARRAY_SIZE(mmc_resources),
+};
+
+void __init at91_add_device_mmc(struct at91_mmc_data *data)
+{
+	if (!data)
+		return;
+
+	/* input/irq */
+	if (data->det_pin) {
+		at91_set_gpio_input(data->det_pin, 1);
+		at91_set_deglitch(data->det_pin, 1);
+	}
+	if (data->wp_pin)
+		at91_set_gpio_input(data->wp_pin, 1);
+	if (data->vcc_pin)
+		at91_set_gpio_output(data->vcc_pin, 0);
+
+	/* CLK */
+	at91_set_A_periph(AT91_PIN_PA8, 0);
+
+	if (data->slot_b) {
+		/* CMD */
+		at91_set_B_periph(AT91_PIN_PA1, 1);
+
+		/* DAT0, maybe DAT1..DAT3 */
+		at91_set_B_periph(AT91_PIN_PA0, 1);
+		if (data->wire4) {
+			at91_set_B_periph(AT91_PIN_PA5, 1);
+			at91_set_B_periph(AT91_PIN_PA4, 1);
+			at91_set_B_periph(AT91_PIN_PA3, 1);
+		}
+	} else {
+		/* CMD */
+		at91_set_A_periph(AT91_PIN_PA7, 1);
+
+		/* DAT0, maybe DAT1..DAT3 */
+		at91_set_A_periph(AT91_PIN_PA6, 1);
+		if (data->wire4) {
+			at91_set_A_periph(AT91_PIN_PA9, 1);
+			at91_set_A_periph(AT91_PIN_PA10, 1);
+			at91_set_A_periph(AT91_PIN_PA11, 1);
+		}
+	}
+
+	mmc_data = *data;
+	platform_device_register(&at91sam9260_mmc_device);
+}
+#else
+void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+static struct at91_nand_data nand_data;
+
+#define NAND_BASE	AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+	{
+		.start	= NAND_BASE,
+		.end	= NAND_BASE + SZ_8M - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device at91sam9260_nand_device = {
+	.name		= "at91_nand",
+	.id		= -1,
+	.dev		= {
+				.platform_data	= &nand_data,
+	},
+	.resource	= nand_resources,
+	.num_resources	= ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct at91_nand_data *data)
+{
+	unsigned long csa, mode;
+
+	if (!data)
+		return;
+
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
+
+	/* set the bus interface characteristics */
+	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
+			| AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+
+	at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
+			| AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
+
+	at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+
+	if (data->bus_width_16)
+		mode = AT91_SMC_DBW_16;
+	else
+		mode = AT91_SMC_DBW_8;
+	at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
+
+	/* enable pin */
+	if (data->enable_pin)
+		at91_set_gpio_output(data->enable_pin, 1);
+
+	/* ready/busy pin */
+	if (data->rdy_pin)
+		at91_set_gpio_input(data->rdy_pin, 1);
+
+	/* card detect pin */
+	if (data->det_pin)
+		at91_set_gpio_input(data->det_pin, 1);
+
+	nand_data = *data;
+	platform_device_register(&at91sam9260_nand_device);
+}
+#else
+void __init at91_add_device_nand(struct at91_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_TWI,
+		.end	= AT91SAM9260_BASE_TWI + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_TWI,
+		.end	= AT91SAM9260_ID_TWI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9260_twi_device = {
+	.name		= "at91_i2c",
+	.id		= -1,
+	.resource	= twi_resources,
+	.num_resources	= ARRAY_SIZE(twi_resources),
+};
+
+void __init at91_add_device_i2c(void)
+{
+	/* pins used for TWI interface */
+	at91_set_A_periph(AT91_PIN_PA23, 0);		/* TWD */
+	at91_set_multi_drive(AT91_PIN_PA23, 1);
+
+	at91_set_A_periph(AT91_PIN_PA24, 0);		/* TWCK */
+	at91_set_multi_drive(AT91_PIN_PA24, 1);
+
+	platform_device_register(&at91sam9260_twi_device);
+}
+#else
+void __init at91_add_device_i2c(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = 0xffffffffUL;
+
+static struct resource spi0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_SPI0,
+		.end	= AT91SAM9260_BASE_SPI0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_SPI0,
+		.end	= AT91SAM9260_ID_SPI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9260_spi0_device = {
+	.name		= "atmel_spi",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+	},
+	.resource	= spi0_resources,
+	.num_resources	= ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PC11, AT91_PIN_PC16, AT91_PIN_PC17 };
+
+static struct resource spi1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_SPI1,
+		.end	= AT91SAM9260_BASE_SPI1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_SPI1,
+		.end	= AT91SAM9260_ID_SPI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9260_spi1_device = {
+	.name		= "atmel_spi",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+	},
+	.resource	= spi1_resources,
+	.num_resources	= ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+	int i;
+	unsigned long cs_pin;
+	short enable_spi0 = 0;
+	short enable_spi1 = 0;
+
+	/* Choose SPI chip-selects */
+	for (i = 0; i < nr_devices; i++) {
+		if (devices[i].controller_data)
+			cs_pin = (unsigned long) devices[i].controller_data;
+		else if (devices[i].bus_num == 0)
+			cs_pin = spi0_standard_cs[devices[i].chip_select];
+		else
+			cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+		if (devices[i].bus_num == 0)
+			enable_spi0 = 1;
+		else
+			enable_spi1 = 1;
+
+		/* enable chip-select pin */
+		at91_set_gpio_output(cs_pin, 1);
+
+		/* pass chip-select pin to driver */
+		devices[i].controller_data = (void *) cs_pin;
+	}
+
+	spi_register_board_info(devices, nr_devices);
+
+	/* Configure SPI bus(es) */
+	if (enable_spi0) {
+		at91_set_A_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
+		at91_set_A_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
+		at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPI1_SPCK */
+
+		at91_clock_associate("spi0_clk", &at91sam9260_spi0_device.dev, "spi_clk");
+		platform_device_register(&at91sam9260_spi0_device);
+	}
+	if (enable_spi1) {
+		at91_set_A_periph(AT91_PIN_PB0, 0);	/* SPI1_MISO */
+		at91_set_A_periph(AT91_PIN_PB1, 0);	/* SPI1_MOSI */
+		at91_set_A_periph(AT91_PIN_PB2, 0);	/* SPI1_SPCK */
+
+		at91_clock_associate("spi1_clk", &at91sam9260_spi1_device.dev, "spi_clk");
+		platform_device_register(&at91sam9260_spi1_device);
+	}
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  LEDs
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_LEDS)
+u8 at91_leds_cpu;
+u8 at91_leds_timer;
+
+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+{
+	at91_leds_cpu	= cpu_led;
+	at91_leds_timer	= timer_led;
+}
+#else
+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  UART
+ * -------------------------------------------------------------------- */
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+	[0] = {
+		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
+		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_ID_SYS,
+		.end	= AT91_ID_SYS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data dbgu_data = {
+	.use_dma_tx	= 0,
+	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
+	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static struct platform_device at91sam9260_dbgu_device = {
+	.name		= "atmel_usart",
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &dbgu_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= dbgu_resources,
+	.num_resources	= ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PB14, 0);		/* DRXD */
+	at91_set_A_periph(AT91_PIN_PB15, 1);		/* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_US0,
+		.end	= AT91SAM9260_BASE_US0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_US0,
+		.end	= AT91SAM9260_ID_US0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart0_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9260_uart0_device = {
+	.name		= "atmel_usart",
+	.id		= 1,
+	.dev		= {
+				.platform_data	= &uart0_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart0_resources,
+	.num_resources	= ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PB4, 1);		/* TXD0 */
+	at91_set_A_periph(AT91_PIN_PB5, 0);		/* RXD0 */
+	at91_set_A_periph(AT91_PIN_PB26, 0);		/* RTS0 */
+	at91_set_A_periph(AT91_PIN_PB27, 0);		/* CTS0 */
+	at91_set_A_periph(AT91_PIN_PB24, 0);		/* DTR0 */
+	at91_set_A_periph(AT91_PIN_PB22, 0);		/* DSR0 */
+	at91_set_A_periph(AT91_PIN_PB23, 0);		/* DCD0 */
+	at91_set_A_periph(AT91_PIN_PB25, 0);		/* RI0 */
+}
+
+static struct resource uart1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_US1,
+		.end	= AT91SAM9260_BASE_US1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_US1,
+		.end	= AT91SAM9260_ID_US1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart1_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9260_uart1_device = {
+	.name		= "atmel_usart",
+	.id		= 2,
+	.dev		= {
+				.platform_data	= &uart1_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart1_resources,
+	.num_resources	= ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PB6, 1);		/* TXD1 */
+	at91_set_A_periph(AT91_PIN_PB7, 0);		/* RXD1 */
+	at91_set_A_periph(AT91_PIN_PB28, 0);		/* RTS1 */
+	at91_set_A_periph(AT91_PIN_PB29, 0);		/* CTS1 */
+}
+
+static struct resource uart2_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_US2,
+		.end	= AT91SAM9260_BASE_US2 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_US2,
+		.end	= AT91SAM9260_ID_US2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart2_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9260_uart2_device = {
+	.name		= "atmel_usart",
+	.id		= 3,
+	.dev		= {
+				.platform_data	= &uart2_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart2_resources,
+	.num_resources	= ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PB8, 1);		/* TXD2 */
+	at91_set_A_periph(AT91_PIN_PB9, 0);		/* RXD2 */
+}
+
+static struct resource uart3_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_US3,
+		.end	= AT91SAM9260_BASE_US3 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_US3,
+		.end	= AT91SAM9260_ID_US3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart3_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9260_uart3_device = {
+	.name		= "atmel_usart",
+	.id		= 4,
+	.dev		= {
+				.platform_data	= &uart3_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart3_resources,
+	.num_resources	= ARRAY_SIZE(uart3_resources),
+};
+
+static inline void configure_usart3_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PB10, 1);		/* TXD3 */
+	at91_set_A_periph(AT91_PIN_PB11, 0);		/* RXD3 */
+}
+
+static struct resource uart4_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_US4,
+		.end	= AT91SAM9260_BASE_US4 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_US4,
+		.end	= AT91SAM9260_ID_US4,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart4_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9260_uart4_device = {
+	.name		= "atmel_usart",
+	.id		= 5,
+	.dev		= {
+				.platform_data	= &uart4_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart4_resources,
+	.num_resources	= ARRAY_SIZE(uart4_resources),
+};
+
+static inline void configure_usart4_pins(void)
+{
+	at91_set_B_periph(AT91_PIN_PA31, 1);		/* TXD4 */
+	at91_set_B_periph(AT91_PIN_PA30, 0);		/* RXD4 */
+}
+
+static struct resource uart5_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_US5,
+		.end	= AT91SAM9260_BASE_US5 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_US5,
+		.end	= AT91SAM9260_ID_US5,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart5_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9260_uart5_device = {
+	.name		= "atmel_usart",
+	.id		= 6,
+	.dev		= {
+				.platform_data	= &uart5_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart5_resources,
+	.num_resources	= ARRAY_SIZE(uart5_resources),
+};
+
+static inline void configure_usart5_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PB12, 1);		/* TXD5 */
+	at91_set_A_periph(AT91_PIN_PB13, 0);		/* RXD5 */
+}
+
+struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
+struct platform_device *atmel_default_console_device;	/* the serial console device */
+
+void __init at91_init_serial(struct at91_uart_config *config)
+{
+	int i;
+
+	/* Fill in list of supported UARTs */
+	for (i = 0; i < config->nr_tty; i++) {
+		switch (config->tty_map[i]) {
+			case 0:
+				configure_usart0_pins();
+				at91_uarts[i] = &at91sam9260_uart0_device;
+				at91_clock_associate("usart0_clk", &at91sam9260_uart0_device.dev, "usart");
+				break;
+			case 1:
+				configure_usart1_pins();
+				at91_uarts[i] = &at91sam9260_uart1_device;
+				at91_clock_associate("usart1_clk", &at91sam9260_uart1_device.dev, "usart");
+				break;
+			case 2:
+				configure_usart2_pins();
+				at91_uarts[i] = &at91sam9260_uart2_device;
+				at91_clock_associate("usart2_clk", &at91sam9260_uart2_device.dev, "usart");
+				break;
+			case 3:
+				configure_usart3_pins();
+				at91_uarts[i] = &at91sam9260_uart3_device;
+				at91_clock_associate("usart3_clk", &at91sam9260_uart3_device.dev, "usart");
+				break;
+			case 4:
+				configure_usart4_pins();
+				at91_uarts[i] = &at91sam9260_uart4_device;
+				at91_clock_associate("usart4_clk", &at91sam9260_uart4_device.dev, "usart");
+				break;
+			case 5:
+				configure_usart5_pins();
+				at91_uarts[i] = &at91sam9260_uart5_device;
+				at91_clock_associate("usart5_clk", &at91sam9260_uart5_device.dev, "usart");
+				break;
+			case 6:
+				configure_dbgu_pins();
+				at91_uarts[i] = &at91sam9260_dbgu_device;
+				at91_clock_associate("mck", &at91sam9260_dbgu_device.dev, "usart");
+				break;
+			default:
+				continue;
+		}
+		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
+	}
+
+	/* Set serial console device */
+	if (config->console_tty < ATMEL_MAX_UART)
+		atmel_default_console_device = at91_uarts[config->console_tty];
+	if (!atmel_default_console_device)
+		printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+void __init at91_add_device_serial(void)
+{
+	int i;
+
+	for (i = 0; i < ATMEL_MAX_UART; i++) {
+		if (at91_uarts[i])
+			platform_device_register(at91_uarts[i]);
+	}
+}
+#else
+void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+	return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
new file mode 100644
index 0000000..47e02ff
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -0,0 +1,290 @@
+/*
+ * arch/arm/mach-at91/at91sam9261.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/at91sam9261.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91sam9261_io_desc[] __initdata = {
+	{
+		.virtual	= AT91_VA_BASE_SYS,
+		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9261_SRAM_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9261_SRAM_BASE),
+		.length		= AT91SAM9261_SRAM_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+/* --------------------------------------------------------------------
+ *  Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+	.name		= "pioA_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_PIOA,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+	.name		= "pioB_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_PIOB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+	.name		= "pioC_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_PIOC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+	.name		= "usart0_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_US0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+	.name		= "usart1_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_US1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+	.name		= "usart2_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_US2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc_clk = {
+	.name		= "mci_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_MCI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk udc_clk = {
+	.name		= "udc_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_UDP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi_clk = {
+	.name		= "twi_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_TWI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+	.name		= "spi0_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_SPI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+	.name		= "spi1_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_SPI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+	.name		= "ohci_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_UHP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+	.name		= "lcdc_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_LCDC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+	&pioA_clk,
+	&pioB_clk,
+	&pioC_clk,
+	&usart0_clk,
+	&usart1_clk,
+	&usart2_clk,
+	&mmc_clk,
+	&udc_clk,
+	&twi_clk,
+	&spi0_clk,
+	&spi1_clk,
+	// ssc 0 .. ssc2
+	// tc0 .. tc2
+	&ohci_clk,
+	&lcdc_clk,
+	// irq0 .. irq2
+};
+
+/*
+ * The four programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+	.name		= "pck0",
+	.pmc_mask	= AT91_PMC_PCK0,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 0,
+};
+static struct clk pck1 = {
+	.name		= "pck1",
+	.pmc_mask	= AT91_PMC_PCK1,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 1,
+};
+static struct clk pck2 = {
+	.name		= "pck2",
+	.pmc_mask	= AT91_PMC_PCK2,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 2,
+};
+static struct clk pck3 = {
+	.name		= "pck3",
+	.pmc_mask	= AT91_PMC_PCK3,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 3,
+};
+
+/* HClocks */
+static struct clk hck0 = {
+	.name		= "hck0",
+	.pmc_mask	= AT91_PMC_HCK0,
+	.type		= CLK_TYPE_SYSTEM,
+	.id		= 0,
+};
+static struct clk hck1 = {
+	.name		= "hck1",
+	.pmc_mask	= AT91_PMC_HCK1,
+	.type		= CLK_TYPE_SYSTEM,
+	.id		= 1,
+};
+
+static void __init at91sam9261_register_clocks(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+		clk_register(periph_clocks[i]);
+
+	clk_register(&pck0);
+	clk_register(&pck1);
+	clk_register(&pck2);
+	clk_register(&pck3);
+
+	clk_register(&hck0);
+	clk_register(&hck1);
+}
+
+/* --------------------------------------------------------------------
+ *  GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91sam9261_gpio[] = {
+	{
+		.id		= AT91SAM9261_ID_PIOA,
+		.offset		= AT91_PIOA,
+		.clock		= &pioA_clk,
+	}, {
+		.id		= AT91SAM9261_ID_PIOB,
+		.offset		= AT91_PIOB,
+		.clock		= &pioB_clk,
+	}, {
+		.id		= AT91SAM9261_ID_PIOC,
+		.offset		= AT91_PIOC,
+		.clock		= &pioC_clk,
+	}
+};
+
+static void at91sam9261_reset(void)
+{
+	at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+
+/* --------------------------------------------------------------------
+ *  AT91SAM9261 processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91sam9261_initialize(unsigned long main_clock)
+{
+	/* Map peripherals */
+	iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
+
+	at91_arch_reset = at91sam9261_reset;
+	at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
+			| (1 << AT91SAM9261_ID_IRQ2);
+
+	/* Init clock subsystem */
+	at91_clock_init(main_clock);
+
+	/* Register the processor-specific clocks */
+	at91sam9261_register_clocks();
+
+	/* Register GPIO subsystem */
+	at91_gpio_init(at91sam9261_gpio, 3);
+}
+
+/* --------------------------------------------------------------------
+ *  Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
+	7,	/* Advanced Interrupt Controller */
+	7,	/* System Peripherals */
+	0,	/* Parallel IO Controller A */
+	0,	/* Parallel IO Controller B */
+	0,	/* Parallel IO Controller C */
+	0,
+	6,	/* USART 0 */
+	6,	/* USART 1 */
+	6,	/* USART 2 */
+	0,	/* Multimedia Card Interface */
+	4,	/* USB Device Port */
+	0,	/* Two-Wire Interface */
+	6,	/* Serial Peripheral Interface 0 */
+	6,	/* Serial Peripheral Interface 1 */
+	5,	/* Serial Synchronous Controller 0 */
+	5,	/* Serial Synchronous Controller 1 */
+	5,	/* Serial Synchronous Controller 2 */
+	0,	/* Timer Counter 0 */
+	0,	/* Timer Counter 1 */
+	0,	/* Timer Counter 2 */
+	3,	/* USB Host port */
+	3,	/* LCD Controller */
+	0,
+	0,
+	0,
+	0,
+	0,
+	0,
+	0,
+	0,	/* Advanced Interrupt Controller */
+	0,	/* Advanced Interrupt Controller */
+	0,	/* Advanced Interrupt Controller */
+};
+
+void __init at91sam9261_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+	if (!priority)
+		priority = at91sam9261_default_irq_priority;
+
+	/* Initialize the AIC interrupt controller */
+	at91_aic_init(priority);
+
+	/* Enable GPIO interrupts */
+	at91_gpio_irq_setup();
+}
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
new file mode 100644
index 0000000..3249de0
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -0,0 +1,741 @@
+/*
+ * arch/arm/mach-at91/at91sam9261_devices.c
+ *
+ *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ *  Copyright (C) 2005 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_device.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam9261.h>
+#include <asm/arch/at91sam9261_matrix.h>
+#include <asm/arch/at91sam926x_mc.h>
+
+#include "generic.h"
+
+#define SZ_512	0x00000200
+#define SZ_256	0x00000100
+#define SZ_16	0x00000010
+
+/* --------------------------------------------------------------------
+ *  USB Host
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = 0xffffffffUL;
+static struct at91_usbh_data usbh_data;
+
+static struct resource usbh_resources[] = {
+	[0] = {
+		.start	= AT91SAM9261_UHP_BASE,
+		.end	= AT91SAM9261_UHP_BASE + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9261_ID_UHP,
+		.end	= AT91SAM9261_ID_UHP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9261_usbh_device = {
+	.name		= "at91_ohci",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &ohci_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &usbh_data,
+	},
+	.resource	= usbh_resources,
+	.num_resources	= ARRAY_SIZE(usbh_resources),
+};
+
+void __init at91_add_device_usbh(struct at91_usbh_data *data)
+{
+	if (!data)
+		return;
+
+	usbh_data = *data;
+	platform_device_register(&at91sam9261_usbh_device);
+}
+#else
+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  USB Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_USB_GADGET_AT91
+static struct at91_udc_data udc_data;
+
+static struct resource udc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9261_BASE_UDP,
+		.end	= AT91SAM9261_BASE_UDP + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9261_ID_UDP,
+		.end	= AT91SAM9261_ID_UDP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9261_udc_device = {
+	.name		= "at91_udc",
+	.id		= -1,
+	.dev		= {
+				.platform_data		= &udc_data,
+	},
+	.resource	= udc_resources,
+	.num_resources	= ARRAY_SIZE(udc_resources),
+};
+
+void __init at91_add_device_udc(struct at91_udc_data *data)
+{
+	unsigned long x;
+
+	if (!data)
+		return;
+
+	if (data->vbus_pin) {
+		at91_set_gpio_input(data->vbus_pin, 0);
+		at91_set_deglitch(data->vbus_pin, 1);
+	}
+
+	/* Pullup pin is handled internally */
+	x = at91_sys_read(AT91_MATRIX_USBPUCR);
+	at91_sys_write(AT91_MATRIX_USBPUCR, x | AT91_MATRIX_USBPUCR_PUON);
+
+	udc_data = *data;
+	platform_device_register(&at91sam9261_udc_device);
+}
+#else
+void __init at91_add_device_udc(struct at91_udc_data *data) {}
+#endif
+
+/* --------------------------------------------------------------------
+ *  MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = 0xffffffffUL;
+static struct at91_mmc_data mmc_data;
+
+static struct resource mmc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9261_BASE_MCI,
+		.end	= AT91SAM9261_BASE_MCI + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9261_ID_MCI,
+		.end	= AT91SAM9261_ID_MCI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9261_mmc_device = {
+	.name		= "at91_mci",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &mmc_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &mmc_data,
+	},
+	.resource	= mmc_resources,
+	.num_resources	= ARRAY_SIZE(mmc_resources),
+};
+
+void __init at91_add_device_mmc(struct at91_mmc_data *data)
+{
+	if (!data)
+		return;
+
+	/* input/irq */
+	if (data->det_pin) {
+		at91_set_gpio_input(data->det_pin, 1);
+		at91_set_deglitch(data->det_pin, 1);
+	}
+	if (data->wp_pin)
+		at91_set_gpio_input(data->wp_pin, 1);
+	if (data->vcc_pin)
+		at91_set_gpio_output(data->vcc_pin, 0);
+
+	/* CLK */
+	at91_set_B_periph(AT91_PIN_PA2, 0);
+
+	/* CMD */
+	at91_set_B_periph(AT91_PIN_PA1, 1);
+
+	/* DAT0, maybe DAT1..DAT3 */
+	at91_set_B_periph(AT91_PIN_PA0, 1);
+	if (data->wire4) {
+		at91_set_B_periph(AT91_PIN_PA4, 1);
+		at91_set_B_periph(AT91_PIN_PA5, 1);
+		at91_set_B_periph(AT91_PIN_PA6, 1);
+	}
+
+	mmc_data = *data;
+	platform_device_register(&at91sam9261_mmc_device);
+}
+#else
+void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+static struct at91_nand_data nand_data;
+
+#define NAND_BASE	AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+	{
+		.start	= NAND_BASE,
+		.end	= NAND_BASE + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device at91_nand_device = {
+	.name		= "at91_nand",
+	.id		= -1,
+	.dev		= {
+				.platform_data	= &nand_data,
+	},
+	.resource	= nand_resources,
+	.num_resources	= ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct at91_nand_data *data)
+{
+	unsigned long csa, mode;
+
+	if (!data)
+		return;
+
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
+
+	/* set the bus interface characteristics */
+	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
+			| AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+
+	at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
+			| AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
+
+	at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+
+	if (data->bus_width_16)
+		mode = AT91_SMC_DBW_16;
+	else
+		mode = AT91_SMC_DBW_8;
+	at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
+
+	/* enable pin */
+	if (data->enable_pin)
+		at91_set_gpio_output(data->enable_pin, 1);
+
+	/* ready/busy pin */
+	if (data->rdy_pin)
+		at91_set_gpio_input(data->rdy_pin, 1);
+
+	/* card detect pin */
+	if (data->det_pin)
+		at91_set_gpio_input(data->det_pin, 1);
+
+	at91_set_A_periph(AT91_PIN_PC0, 0);		/* NANDOE */
+	at91_set_A_periph(AT91_PIN_PC1, 0);		/* NANDWE */
+
+	nand_data = *data;
+	platform_device_register(&at91_nand_device);
+}
+
+#else
+void __init at91_add_device_nand(struct at91_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi_resources[] = {
+	[0] = {
+		.start	= AT91SAM9261_BASE_TWI,
+		.end	= AT91SAM9261_BASE_TWI + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9261_ID_TWI,
+		.end	= AT91SAM9261_ID_TWI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9261_twi_device = {
+	.name		= "at91_i2c",
+	.id		= -1,
+	.resource	= twi_resources,
+	.num_resources	= ARRAY_SIZE(twi_resources),
+};
+
+void __init at91_add_device_i2c(void)
+{
+	/* pins used for TWI interface */
+	at91_set_A_periph(AT91_PIN_PA7, 0);		/* TWD */
+	at91_set_multi_drive(AT91_PIN_PA7, 1);
+
+	at91_set_A_periph(AT91_PIN_PA8, 0);		/* TWCK */
+	at91_set_multi_drive(AT91_PIN_PA8, 1);
+
+	platform_device_register(&at91sam9261_twi_device);
+}
+#else
+void __init at91_add_device_i2c(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = 0xffffffffUL;
+
+static struct resource spi0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9261_BASE_SPI0,
+		.end	= AT91SAM9261_BASE_SPI0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9261_ID_SPI0,
+		.end	= AT91SAM9261_ID_SPI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9261_spi0_device = {
+	.name		= "atmel_spi",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+	},
+	.resource	= spi0_resources,
+	.num_resources	= ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
+
+static struct resource spi1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9261_BASE_SPI1,
+		.end	= AT91SAM9261_BASE_SPI1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9261_ID_SPI1,
+		.end	= AT91SAM9261_ID_SPI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9261_spi1_device = {
+	.name		= "atmel_spi",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+	},
+	.resource	= spi1_resources,
+	.num_resources	= ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB28, AT91_PIN_PA24, AT91_PIN_PA25, AT91_PIN_PA26 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+	int i;
+	unsigned long cs_pin;
+	short enable_spi0 = 0;
+	short enable_spi1 = 0;
+
+	/* Choose SPI chip-selects */
+	for (i = 0; i < nr_devices; i++) {
+		if (devices[i].controller_data)
+			cs_pin = (unsigned long) devices[i].controller_data;
+		else if (devices[i].bus_num == 0)
+			cs_pin = spi0_standard_cs[devices[i].chip_select];
+		else
+			cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+		if (devices[i].bus_num == 0)
+			enable_spi0 = 1;
+		else
+			enable_spi1 = 1;
+
+		/* enable chip-select pin */
+		at91_set_gpio_output(cs_pin, 1);
+
+		/* pass chip-select pin to driver */
+		devices[i].controller_data = (void *) cs_pin;
+	}
+
+	spi_register_board_info(devices, nr_devices);
+
+	/* Configure SPI bus(es) */
+	if (enable_spi0) {
+		at91_set_A_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
+		at91_set_A_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
+		at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
+
+		at91_clock_associate("spi0_clk", &at91sam9261_spi0_device.dev, "spi_clk");
+		platform_device_register(&at91sam9261_spi0_device);
+	}
+	if (enable_spi1) {
+		at91_set_A_periph(AT91_PIN_PB30, 0);	/* SPI1_MISO */
+		at91_set_A_periph(AT91_PIN_PB31, 0);	/* SPI1_MOSI */
+		at91_set_A_periph(AT91_PIN_PB29, 0);	/* SPI1_SPCK */
+
+		at91_clock_associate("spi1_clk", &at91sam9261_spi1_device.dev, "spi_clk");
+		platform_device_register(&at91sam9261_spi1_device);
+	}
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  LCD Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_FB_AT91) || defined(CONFIG_FB_AT91_MODULE)
+static u64 lcdc_dmamask = 0xffffffffUL;
+static struct at91fb_info lcdc_data;
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9261_LCDC_BASE,
+		.end	= AT91SAM9261_LCDC_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9261_ID_LCDC,
+		.end	= AT91SAM9261_ID_LCDC,
+		.flags	= IORESOURCE_IRQ,
+	},
+#if defined(CONFIG_FB_INTSRAM)
+	[2] = {
+		.start	= AT91SAM9261_SRAM_BASE,
+		.end	= AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+#endif
+};
+
+static struct platform_device at91_lcdc_device = {
+	.name		= "at91-fb",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &lcdc_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &lcdc_data,
+	},
+	.resource	= lcdc_resources,
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+};
+
+void __init at91_add_device_lcdc(struct at91fb_info *data)
+{
+	if (!data) {
+		return;
+	}
+
+	at91_set_A_periph(AT91_PIN_PB1, 0);	/* LCDHSYNC */
+	at91_set_A_periph(AT91_PIN_PB2, 0);	/* LCDDOTCK */
+	at91_set_A_periph(AT91_PIN_PB3, 0);	/* LCDDEN */
+	at91_set_A_periph(AT91_PIN_PB4, 0);	/* LCDCC */
+	at91_set_A_periph(AT91_PIN_PB7, 0);	/* LCDD2 */
+	at91_set_A_periph(AT91_PIN_PB8, 0);	/* LCDD3 */
+	at91_set_A_periph(AT91_PIN_PB9, 0);	/* LCDD4 */
+	at91_set_A_periph(AT91_PIN_PB10, 0);	/* LCDD5 */
+	at91_set_A_periph(AT91_PIN_PB11, 0);	/* LCDD6 */
+	at91_set_A_periph(AT91_PIN_PB12, 0);	/* LCDD7 */
+	at91_set_A_periph(AT91_PIN_PB15, 0);	/* LCDD10 */
+	at91_set_A_periph(AT91_PIN_PB16, 0);	/* LCDD11 */
+	at91_set_A_periph(AT91_PIN_PB17, 0);	/* LCDD12 */
+	at91_set_A_periph(AT91_PIN_PB18, 0);	/* LCDD13 */
+	at91_set_A_periph(AT91_PIN_PB19, 0);	/* LCDD14 */
+	at91_set_A_periph(AT91_PIN_PB20, 0);	/* LCDD15 */
+	at91_set_B_periph(AT91_PIN_PB23, 0);	/* LCDD18 */
+	at91_set_B_periph(AT91_PIN_PB24, 0);	/* LCDD19 */
+	at91_set_B_periph(AT91_PIN_PB25, 0);	/* LCDD20 */
+	at91_set_B_periph(AT91_PIN_PB26, 0);	/* LCDD21 */
+	at91_set_B_periph(AT91_PIN_PB27, 0);	/* LCDD22 */
+	at91_set_B_periph(AT91_PIN_PB28, 0);	/* LCDD23 */
+
+	lcdc_data = *data;
+	platform_device_register(&at91_lcdc_device);
+}
+#else
+void __init at91_add_device_lcdc(struct at91fb_info *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  LEDs
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_LEDS)
+u8 at91_leds_cpu;
+u8 at91_leds_timer;
+
+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+{
+	at91_leds_cpu	= cpu_led;
+	at91_leds_timer	= timer_led;
+}
+#else
+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+	[0] = {
+		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
+		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_ID_SYS,
+		.end	= AT91_ID_SYS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data dbgu_data = {
+	.use_dma_tx	= 0,
+	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
+	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static struct platform_device at91sam9261_dbgu_device = {
+	.name		= "atmel_usart",
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &dbgu_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= dbgu_resources,
+	.num_resources	= ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PA9, 0);		/* DRXD */
+	at91_set_A_periph(AT91_PIN_PA10, 1);		/* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9261_BASE_US0,
+		.end	= AT91SAM9261_BASE_US0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9261_ID_US0,
+		.end	= AT91SAM9261_ID_US0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart0_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9261_uart0_device = {
+	.name		= "atmel_usart",
+	.id		= 1,
+	.dev		= {
+				.platform_data	= &uart0_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart0_resources,
+	.num_resources	= ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PC8, 1);		/* TXD0 */
+	at91_set_A_periph(AT91_PIN_PC9, 0);		/* RXD0 */
+	at91_set_A_periph(AT91_PIN_PC10, 0);		/* RTS0 */
+	at91_set_A_periph(AT91_PIN_PC11, 0);		/* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9261_BASE_US1,
+		.end	= AT91SAM9261_BASE_US1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9261_ID_US1,
+		.end	= AT91SAM9261_ID_US1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart1_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9261_uart1_device = {
+	.name		= "atmel_usart",
+	.id		= 2,
+	.dev		= {
+				.platform_data	= &uart1_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart1_resources,
+	.num_resources	= ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PC12, 1);		/* TXD1 */
+	at91_set_A_periph(AT91_PIN_PC13, 0);		/* RXD1 */
+}
+
+static struct resource uart2_resources[] = {
+	[0] = {
+		.start	= AT91SAM9261_BASE_US2,
+		.end	= AT91SAM9261_BASE_US2 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9261_ID_US2,
+		.end	= AT91SAM9261_ID_US2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart2_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9261_uart2_device = {
+	.name		= "atmel_usart",
+	.id		= 3,
+	.dev		= {
+				.platform_data	= &uart2_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart2_resources,
+	.num_resources	= ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PC15, 0);		/* RXD2 */
+	at91_set_A_periph(AT91_PIN_PC14, 1);		/* TXD2 */
+}
+
+struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
+struct platform_device *atmel_default_console_device;	/* the serial console device */
+
+void __init at91_init_serial(struct at91_uart_config *config)
+{
+	int i;
+
+	/* Fill in list of supported UARTs */
+	for (i = 0; i < config->nr_tty; i++) {
+		switch (config->tty_map[i]) {
+			case 0:
+				configure_usart0_pins();
+				at91_uarts[i] = &at91sam9261_uart0_device;
+				at91_clock_associate("usart0_clk", &at91sam9261_uart0_device.dev, "usart");
+				break;
+			case 1:
+				configure_usart1_pins();
+				at91_uarts[i] = &at91sam9261_uart1_device;
+				at91_clock_associate("usart1_clk", &at91sam9261_uart1_device.dev, "usart");
+				break;
+			case 2:
+				configure_usart2_pins();
+				at91_uarts[i] = &at91sam9261_uart2_device;
+				at91_clock_associate("usart2_clk", &at91sam9261_uart2_device.dev, "usart");
+				break;
+			case 3:
+				configure_dbgu_pins();
+				at91_uarts[i] = &at91sam9261_dbgu_device;
+				at91_clock_associate("mck", &at91sam9261_dbgu_device.dev, "usart");
+				break;
+			default:
+				continue;
+		}
+		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
+	}
+
+	/* Set serial console device */
+	if (config->console_tty < ATMEL_MAX_UART)
+		atmel_default_console_device = at91_uarts[config->console_tty];
+	if (!atmel_default_console_device)
+		printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+void __init at91_add_device_serial(void)
+{
+	int i;
+
+	for (i = 0; i < ATMEL_MAX_UART; i++) {
+		if (at91_uarts[i])
+			platform_device_register(at91_uarts[i]);
+	}
+}
+#else
+void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+	return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
new file mode 100644
index 0000000..59cbbe1
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -0,0 +1,114 @@
+/*
+ * linux/arch/arm/mach-at91/at91sam926x_time.c
+ *
+ * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France
+ * Revision	 2005 M. Nicolas Diremdjian, ATMEL Rousset, France
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/mach/time.h>
+
+#include <asm/arch/at91_pit.h>
+
+
+#define PIT_CPIV(x)	((x) & AT91_PIT_CPIV)
+#define PIT_PICNT(x)	(((x) & AT91_PIT_PICNT) >> 20)
+
+/*
+ * Returns number of microseconds since last timer interrupt.  Note that interrupts
+ * will have been disabled by do_gettimeofday()
+ *  'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
+ *  'tick' is usecs per jiffy (linux/timex.h).
+ */
+static unsigned long at91sam926x_gettimeoffset(void)
+{
+	unsigned long elapsed;
+	unsigned long t = at91_sys_read(AT91_PIT_PIIR);
+
+	elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t);		/* hardware clock cycles */
+
+	return (unsigned long)(elapsed * 1000000) / LATCH;
+}
+
+/*
+ * IRQ handler for the timer.
+ */
+static irqreturn_t at91sam926x_timer_interrupt(int irq, void *dev_id)
+{
+	volatile long nr_ticks;
+
+	if (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS) {	/* This is a shared interrupt */
+		write_seqlock(&xtime_lock);
+
+		/* Get number to ticks performed before interrupt and clear PIT interrupt */
+		nr_ticks = PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
+		do {
+			timer_tick();
+			nr_ticks--;
+		} while (nr_ticks);
+
+		write_sequnlock(&xtime_lock);
+		return IRQ_HANDLED;
+	} else
+		return IRQ_NONE;		/* not handled */
+}
+
+static struct irqaction at91sam926x_timer_irq = {
+	.name		= "at91_tick",
+	.flags		= IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER,
+	.handler	= at91sam926x_timer_interrupt
+};
+
+void at91sam926x_timer_reset(void)
+{
+	/* Disable timer */
+	at91_sys_write(AT91_PIT_MR, 0);
+
+	/* Clear any pending interrupts */
+	(void) at91_sys_read(AT91_PIT_PIVR);
+
+	/* Set Period Interval timer and enable its interrupt */
+	at91_sys_write(AT91_PIT_MR, (LATCH & AT91_PIT_PIV) | AT91_PIT_PITIEN | AT91_PIT_PITEN);
+}
+
+/*
+ * Set up timer interrupt.
+ */
+void __init at91sam926x_timer_init(void)
+{
+	/* Initialize and enable the timer */
+	at91sam926x_timer_reset();
+
+	/* Make IRQs happen for the system timer. */
+	setup_irq(AT91_ID_SYS, &at91sam926x_timer_irq);
+}
+
+#ifdef CONFIG_PM
+static void at91sam926x_timer_suspend(void)
+{
+	/* Disable timer */
+	at91_sys_write(AT91_PIT_MR, 0);
+}
+#else
+#define at91sam926x_timer_suspend	NULL
+#endif
+
+struct sys_timer at91sam926x_timer = {
+	.init		= at91sam926x_timer_init,
+	.offset		= at91sam926x_gettimeoffset,
+	.suspend	= at91sam926x_timer_suspend,
+	.resume		= at91sam926x_timer_reset,
+};
+
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
new file mode 100644
index 0000000..2d3d4b6
--- /dev/null
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -0,0 +1,102 @@
+/*
+ * linux/arch/arm/mach-at91/board-1arm.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ *    0 .. 3 = USART0 .. USART3
+ *    4      = DBGU
+ */
+static struct at91_uart_config __initdata onearm_uart_config = {
+	.console_tty	= 0,				/* ttyS0 */
+	.nr_tty		= 3,
+	.tty_map	= { 4, 0, 1, -1, -1 },		/* ttyS0, ..., ttyS4 */
+};
+
+static void __init onearm_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+
+	/* Setup the serial ports and console */
+	at91_init_serial(&onearm_uart_config);
+}
+
+static void __init onearm_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata onearm_eth_data = {
+	.phy_irq_pin	= AT91_PIN_PC4,
+	.is_rmii	= 1,
+};
+
+static struct at91_usbh_data __initdata onearm_usbh_data = {
+	.ports		= 1,
+};
+
+static struct at91_udc_data __initdata onearm_udc_data = {
+	.vbus_pin	= AT91_PIN_PC2,
+	.pullup_pin	= AT91_PIN_PC3,
+};
+
+static void __init onearm_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* Ethernet */
+	at91_add_device_eth(&onearm_eth_data);
+	/* USB Host */
+	at91_add_device_usbh(&onearm_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&onearm_udc_data);
+}
+
+MACHINE_START(ONEARM, "Ajeco 1ARM single board computer")
+	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91rm9200_timer,
+	.map_io		= onearm_map_io,
+	.init_irq	= onearm_init_irq,
+	.init_machine	= onearm_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
new file mode 100644
index 0000000..a081532
--- /dev/null
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -0,0 +1,149 @@
+/*
+ * linux/arch/arm/mach-at91/board-carmeva.c
+ *
+ *  Copyright (c) 2005 Peer Georgi
+ *  		       Conitec Datasystems
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ *    0 .. 3 = USART0 .. USART3
+ *    4      = DBGU
+ */
+static struct at91_uart_config __initdata carmeva_uart_config = {
+	.console_tty	= 0,				/* ttyS0 */
+	.nr_tty		= 2,
+	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
+};
+
+static void __init carmeva_map_io(void)
+{
+	/* Initialize processor: 20.000 MHz crystal */
+	at91rm9200_initialize(20000000, AT91RM9200_BGA);
+
+	/* Setup the serial ports and console */
+	at91_init_serial(&carmeva_uart_config);
+}
+
+static void __init carmeva_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata carmeva_eth_data = {
+	.phy_irq_pin	= AT91_PIN_PC4,
+	.is_rmii	= 1,
+};
+
+static struct at91_usbh_data __initdata carmeva_usbh_data = {
+	.ports		= 2,
+};
+
+static struct at91_udc_data __initdata carmeva_udc_data = {
+	.vbus_pin	= AT91_PIN_PD12,
+	.pullup_pin	= AT91_PIN_PD9,
+};
+
+/* FIXME: user dependend */
+// static struct at91_cf_data __initdata carmeva_cf_data = {
+//	.det_pin	= AT91_PIN_PB0,
+//	.rst_pin	= AT91_PIN_PC5,
+	// .irq_pin	= ... not connected
+	// .vcc_pin	= ... always powered
+// };
+
+static struct at91_mmc_data __initdata carmeva_mmc_data = {
+	.slot_b		= 0,
+	.wire4		= 1,
+	.det_pin	= AT91_PIN_PB10,
+	.wp_pin		= AT91_PIN_PC14,
+};
+
+static struct spi_board_info carmeva_spi_devices[] = {
+	{ /* DataFlash chip */
+		.modalias = "mtd_dataflash",
+		.chip_select  = 0,
+		.max_speed_hz = 10 * 1000 * 1000,
+	},
+	{ /* User accessable spi - cs1 (250KHz) */
+		.modalias = "spi-cs1",
+		.chip_select  = 1,
+		.max_speed_hz = 250 *  1000,
+	},
+	{ /* User accessable spi - cs2 (1MHz) */
+		.modalias = "spi-cs2",
+		.chip_select  = 2,
+		.max_speed_hz = 1 * 1000 *  1000,
+	},
+	{ /* User accessable spi - cs3 (10MHz) */
+		.modalias = "spi-cs3",
+		.chip_select  = 3,
+		.max_speed_hz = 10 * 1000 *  1000,
+	},
+};
+
+static void __init carmeva_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* Ethernet */
+	at91_add_device_eth(&carmeva_eth_data);
+	/* USB Host */
+	at91_add_device_usbh(&carmeva_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&carmeva_udc_data);
+	/* I2C */
+	at91_add_device_i2c();
+	/* SPI */
+	at91_add_device_spi(carmeva_spi_devices, ARRAY_SIZE(carmeva_spi_devices));
+	/* Compact Flash */
+//	at91_add_device_cf(&carmeva_cf_data);
+	/* MMC */
+	at91_add_device_mmc(&carmeva_mmc_data);
+}
+
+MACHINE_START(CARMEVA, "Carmeva")
+	/* Maintainer: Conitec Datasystems */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91rm9200_timer,
+	.map_io		= carmeva_map_io,
+	.init_irq	= carmeva_init_irq,
+	.init_machine	= carmeva_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
new file mode 100644
index 0000000..45d6d9b
--- /dev/null
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -0,0 +1,145 @@
+/*
+ * linux/arch/arm/mach-at91/board-csb337.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ *    0 .. 3 = USART0 .. USART3
+ *    4      = DBGU
+ */
+static struct at91_uart_config __initdata csb337_uart_config = {
+	.console_tty	= 0,				/* ttyS0 */
+	.nr_tty		= 2,
+	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
+};
+
+static void __init csb337_map_io(void)
+{
+	/* Initialize processor: 3.6864 MHz crystal */
+	at91rm9200_initialize(3686400, AT91RM9200_BGA);
+
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
+
+	/* Setup the serial ports and console */
+	at91_init_serial(&csb337_uart_config);
+}
+
+static void __init csb337_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata csb337_eth_data = {
+	.phy_irq_pin	= AT91_PIN_PC2,
+	.is_rmii	= 0,
+};
+
+static struct at91_usbh_data __initdata csb337_usbh_data = {
+	.ports		= 2,
+};
+
+static struct at91_udc_data __initdata csb337_udc_data = {
+	// this has no VBUS sensing pin
+	.pullup_pin	= AT91_PIN_PA24,
+};
+
+static struct at91_cf_data __initdata csb337_cf_data = {
+	/*
+	 * connector P4 on the CSB 337 mates to
+	 * connector P8 on the CSB 300CF
+	 */
+
+	/* CSB337 specific */
+	.det_pin	= AT91_PIN_PC3,
+
+	/* CSB300CF specific */
+	.irq_pin	= AT91_PIN_PA19,
+	.vcc_pin	= AT91_PIN_PD0,
+	.rst_pin	= AT91_PIN_PD2,
+};
+
+static struct at91_mmc_data __initdata csb337_mmc_data = {
+	.det_pin	= AT91_PIN_PD5,
+	.slot_b		= 0,
+	.wire4		= 1,
+	.wp_pin		= AT91_PIN_PD6,
+};
+
+static struct spi_board_info csb337_spi_devices[] = {
+	{	/* CAN controller */
+		.modalias	= "sak82c900",
+		.chip_select	= 0,
+		.max_speed_hz	= 6 * 1000 * 1000,
+	},
+};
+
+static void __init csb337_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* Ethernet */
+	at91_add_device_eth(&csb337_eth_data);
+	/* USB Host */
+	at91_add_device_usbh(&csb337_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&csb337_udc_data);
+	/* I2C */
+	at91_add_device_i2c();
+	/* Compact Flash */
+	at91_set_gpio_input(AT91_PIN_PB22, 1);		/* IOIS16 */
+	at91_add_device_cf(&csb337_cf_data);
+	/* SPI */
+	at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
+	/* MMC */
+	at91_add_device_mmc(&csb337_mmc_data);
+}
+
+MACHINE_START(CSB337, "Cogent CSB337")
+	/* Maintainer: Bill Gatliff */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91rm9200_timer,
+	.map_io		= csb337_map_io,
+	.init_irq	= csb337_init_irq,
+	.init_machine	= csb337_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
new file mode 100644
index 0000000..7746094
--- /dev/null
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -0,0 +1,109 @@
+/*
+ * linux/arch/arm/mach-at91/board-csb637.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ *    0 .. 3 = USART0 .. USART3
+ *    4      = DBGU
+ */
+static struct at91_uart_config __initdata csb637_uart_config = {
+	.console_tty	= 0,				/* ttyS0 */
+	.nr_tty		= 2,
+	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
+};
+
+static void __init csb637_map_io(void)
+{
+	/* Initialize processor: 3.6864 MHz crystal */
+	at91rm9200_initialize(3686400, AT91RM9200_BGA);
+
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
+
+	/* Setup the serial ports and console */
+	at91_init_serial(&csb637_uart_config);
+}
+
+static void __init csb637_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata csb637_eth_data = {
+	.phy_irq_pin	= AT91_PIN_PC0,
+	.is_rmii	= 0,
+};
+
+static struct at91_usbh_data __initdata csb637_usbh_data = {
+	.ports		= 2,
+};
+
+static struct at91_udc_data __initdata csb637_udc_data = {
+	.vbus_pin     = AT91_PIN_PB28,
+	.pullup_pin   = AT91_PIN_PB1,
+};
+
+static void __init csb637_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* Ethernet */
+	at91_add_device_eth(&csb637_eth_data);
+	/* USB Host */
+	at91_add_device_usbh(&csb637_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&csb637_udc_data);
+	/* I2C */
+	at91_add_device_i2c();
+	/* SPI */
+	at91_add_device_spi(NULL, 0);
+}
+
+MACHINE_START(CSB637, "Cogent CSB637")
+	/* Maintainer: Bill Gatliff */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91rm9200_timer,
+	.map_io		= csb637_map_io,
+	.init_irq	= csb637_init_irq,
+	.init_machine	= csb637_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c
new file mode 100644
index 0000000..7401dbe
--- /dev/null
+++ b/arch/arm/mach-at91/board-dk.c
@@ -0,0 +1,216 @@
+/*
+ * linux/arch/arm/mach-at91/board-dk.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *
+ *  Epson S1D framebuffer glue code is:
+ *     Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91rm9200_mc.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ *    0 .. 3 = USART0 .. USART3
+ *    4      = DBGU
+ */
+static struct at91_uart_config __initdata dk_uart_config = {
+	.console_tty	= 0,				/* ttyS0 */
+	.nr_tty		= 2,
+	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
+};
+
+static void __init dk_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91rm9200_initialize(18432000, AT91RM9200_BGA);
+
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
+
+	/* Setup the serial ports and console */
+	at91_init_serial(&dk_uart_config);
+}
+
+static void __init dk_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata dk_eth_data = {
+	.phy_irq_pin	= AT91_PIN_PC4,
+	.is_rmii	= 1,
+};
+
+static struct at91_usbh_data __initdata dk_usbh_data = {
+	.ports		= 2,
+};
+
+static struct at91_udc_data __initdata dk_udc_data = {
+	.vbus_pin	= AT91_PIN_PD4,
+	.pullup_pin	= AT91_PIN_PD5,
+};
+
+static struct at91_cf_data __initdata dk_cf_data = {
+	.det_pin	= AT91_PIN_PB0,
+	.rst_pin	= AT91_PIN_PC5,
+	// .irq_pin	= ... not connected
+	// .vcc_pin	= ... always powered
+};
+
+static struct at91_mmc_data __initdata dk_mmc_data = {
+	.slot_b		= 0,
+	.wire4		= 1,
+};
+
+static struct spi_board_info dk_spi_devices[] = {
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+	},
+	{	/* UR6HCPS2-SP40 PS2-to-SPI adapter */
+		.modalias	= "ur6hcps2",
+		.chip_select	= 1,
+		.max_speed_hz	= 250 *  1000,
+	},
+	{	/* TLV1504 ADC, 4 channels, 10 bits; one is a temp sensor */
+		.modalias	= "tlv1504",
+		.chip_select	= 2,
+		.max_speed_hz	= 20 * 1000 * 1000,
+	},
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+	{	/* DataFlash card */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 3,
+		.max_speed_hz	= 15 * 1000 * 1000,
+	}
+#endif
+};
+
+static struct mtd_partition __initdata dk_nand_partition[] = {
+	{
+		.name	= "NAND Partition 1",
+		.offset	= 0,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(dk_nand_partition);
+	return dk_nand_partition;
+}
+
+static struct at91_nand_data __initdata dk_nand_data = {
+	.ale		= 22,
+	.cle		= 21,
+	.det_pin	= AT91_PIN_PB1,
+	.rdy_pin	= AT91_PIN_PC2,
+	// .enable_pin	= ... not there
+	.partition_info	= nand_partitions,
+};
+
+#define DK_FLASH_BASE	AT91_CHIPSELECT_0
+#define DK_FLASH_SIZE	0x200000
+
+static struct physmap_flash_data dk_flash_data = {
+	.width	= 2,
+};
+
+static struct resource dk_flash_resource = {
+	.start		= DK_FLASH_BASE,
+	.end		= DK_FLASH_BASE + DK_FLASH_SIZE - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device dk_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &dk_flash_data,
+			},
+	.resource	= &dk_flash_resource,
+	.num_resources	= 1,
+};
+
+
+static void __init dk_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* Ethernet */
+	at91_add_device_eth(&dk_eth_data);
+	/* USB Host */
+	at91_add_device_usbh(&dk_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&dk_udc_data);
+	at91_set_multi_drive(dk_udc_data.pullup_pin, 1);	/* pullup_pin is connected to reset */
+	/* Compact Flash */
+	at91_add_device_cf(&dk_cf_data);
+	/* I2C */
+	at91_add_device_i2c();
+	/* SPI */
+	at91_add_device_spi(dk_spi_devices, ARRAY_SIZE(dk_spi_devices));
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+	/* DataFlash card */
+	at91_set_gpio_output(AT91_PIN_PB7, 0);
+#else
+	/* MMC */
+	at91_set_gpio_output(AT91_PIN_PB7, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
+	at91_add_device_mmc(&dk_mmc_data);
+#endif
+	/* NAND */
+	at91_add_device_nand(&dk_nand_data);
+	/* NOR Flash */
+	platform_device_register(&dk_flash);
+	/* VGA */
+//	dk_add_device_video();
+}
+
+MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
+	/* Maintainer: SAN People/Atmel */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91rm9200_timer,
+	.map_io		= dk_map_io,
+	.init_irq	= dk_init_irq,
+	.init_machine	= dk_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
new file mode 100644
index 0000000..56d5ef6
--- /dev/null
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -0,0 +1,123 @@
+/*
+ * linux/arch/arm/mach-at91/board-eb9200.c
+ *
+ *  Copyright (C) 2005 SAN People, adapted for ATEB9200 from Embest
+ *  by Andrew Patrikalakis
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/device.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ *    0 .. 3 = USART0 .. USART3
+ *    4      = DBGU
+ */
+static struct at91_uart_config __initdata eb9200_uart_config = {
+	.console_tty	= 0,				/* ttyS0 */
+	.nr_tty		= 2,
+	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
+};
+
+static void __init eb9200_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91rm9200_initialize(18432000, AT91RM9200_BGA);
+
+	/* Setup the serial ports and console */
+	at91_init_serial(&eb9200_uart_config);
+}
+
+static void __init eb9200_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata eb9200_eth_data = {
+	.phy_irq_pin	= AT91_PIN_PC4,
+	.is_rmii	= 1,
+};
+
+static struct at91_usbh_data __initdata eb9200_usbh_data = {
+	.ports		= 2,
+};
+
+static struct at91_udc_data __initdata eb9200_udc_data = {
+	.vbus_pin	= AT91_PIN_PD4,
+	.pullup_pin	= AT91_PIN_PD5,
+};
+
+static struct at91_cf_data __initdata eb9200_cf_data = {
+	.det_pin	= AT91_PIN_PB0,
+	.rst_pin	= AT91_PIN_PC5,
+	// .irq_pin	= ... not connected
+	// .vcc_pin	= ... always powered
+};
+
+static struct at91_mmc_data __initdata eb9200_mmc_data = {
+	.slot_b		= 0,
+	.wire4		= 1,
+};
+
+static void __init eb9200_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* Ethernet */
+	at91_add_device_eth(&eb9200_eth_data);
+	/* USB Host */
+	at91_add_device_usbh(&eb9200_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&eb9200_udc_data);
+	/* I2C */
+	at91_add_device_i2c();
+	/* Compact Flash */
+	at91_add_device_cf(&eb9200_cf_data);
+	/* SPI */
+	at91_add_device_spi(NULL, 0);
+	/* MMC */
+	/* only supports 1 or 4 bit interface, not wired through to SPI */
+	at91_add_device_mmc(&eb9200_mmc_data);
+}
+
+MACHINE_START(ATEB9200, "Embest ATEB9200")
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91rm9200_timer,
+	.map_io		= eb9200_map_io,
+	.init_irq	= eb9200_init_irq,
+	.init_machine	= eb9200_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c
new file mode 100644
index 0000000..0f589dd
--- /dev/null
+++ b/arch/arm/mach-at91/board-ek.c
@@ -0,0 +1,174 @@
+/*
+ * linux/arch/arm/mach-at91/board-ek.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *
+ *  Epson S1D framebuffer glue code is:
+ *     Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91rm9200_mc.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ *    0 .. 3 = USART0 .. USART3
+ *    4      = DBGU
+ */
+static struct at91_uart_config __initdata ek_uart_config = {
+	.console_tty	= 0,				/* ttyS0 */
+	.nr_tty		= 2,
+	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
+};
+
+static void __init ek_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91rm9200_initialize(18432000, AT91RM9200_BGA);
+
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
+
+	/* Setup the serial ports and console */
+	at91_init_serial(&ek_uart_config);
+}
+
+static void __init ek_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata ek_eth_data = {
+	.phy_irq_pin	= AT91_PIN_PC4,
+	.is_rmii	= 1,
+};
+
+static struct at91_usbh_data __initdata ek_usbh_data = {
+	.ports		= 2,
+};
+
+static struct at91_udc_data __initdata ek_udc_data = {
+	.vbus_pin	= AT91_PIN_PD4,
+	.pullup_pin	= AT91_PIN_PD5,
+};
+
+static struct at91_mmc_data __initdata ek_mmc_data = {
+	.det_pin	= AT91_PIN_PB27,
+	.slot_b		= 0,
+	.wire4		= 1,
+	.wp_pin		= AT91_PIN_PA17,
+};
+
+static struct spi_board_info ek_spi_devices[] = {
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+	},
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+	{	/* DataFlash card */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 3,
+		.max_speed_hz	= 15 * 1000 * 1000,
+	},
+#endif
+};
+
+#define EK_FLASH_BASE	AT91_CHIPSELECT_0
+#define EK_FLASH_SIZE	0x200000
+
+static struct physmap_flash_data ek_flash_data = {
+	.width	= 2,
+};
+
+static struct resource ek_flash_resource = {
+	.start		= EK_FLASH_BASE,
+	.end		= EK_FLASH_BASE + EK_FLASH_SIZE - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device ek_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &ek_flash_data,
+			},
+	.resource	= &ek_flash_resource,
+	.num_resources	= 1,
+};
+
+
+static void __init ek_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* Ethernet */
+	at91_add_device_eth(&ek_eth_data);
+	/* USB Host */
+	at91_add_device_usbh(&ek_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&ek_udc_data);
+	at91_set_multi_drive(ek_udc_data.pullup_pin, 1);	/* pullup_pin is connected to reset */
+	/* I2C */
+	at91_add_device_i2c();
+	/* SPI */
+	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+	/* DataFlash card */
+	at91_set_gpio_output(AT91_PIN_PB22, 0);
+#else
+	/* MMC */
+	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
+	at91_add_device_mmc(&ek_mmc_data);
+#endif
+	/* NOR Flash */
+	platform_device_register(&ek_flash);
+	/* VGA */
+//	ek_add_device_video();
+}
+
+MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
+	/* Maintainer: SAN People/Atmel */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91rm9200_timer,
+	.map_io		= ek_map_io,
+	.init_irq	= ek_init_irq,
+	.init_machine	= ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
new file mode 100644
index 0000000..c77d84c
--- /dev/null
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -0,0 +1,109 @@
+/*
+ * linux/arch/arm/mach-at91/board-kafa.c
+ *
+ *  Copyright (C) 2006 Sperry-Sun
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ *    0 .. 3 = USART0 .. USART3
+ *    4      = DBGU
+ */
+static struct at91_uart_config __initdata kafa_uart_config = {
+	.console_tty	= 0,				/* ttyS0 */
+	.nr_tty		= 2,
+	.tty_map	= { 4, 0, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
+};
+
+static void __init kafa_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+
+	/* Set up the LEDs */
+	at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
+
+	/* Setup the serial ports and console */
+	at91_init_serial(&kafa_uart_config);
+}
+
+static void __init kafa_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata kafa_eth_data = {
+	.phy_irq_pin	= AT91_PIN_PC4,
+	.is_rmii	= 0,
+};
+
+static struct at91_usbh_data __initdata kafa_usbh_data = {
+	.ports		= 1,
+};
+
+static struct at91_udc_data __initdata kafa_udc_data = {
+	.vbus_pin	= AT91_PIN_PB6,
+	.pullup_pin	= AT91_PIN_PB7,
+};
+
+static void __init kafa_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* Ethernet */
+	at91_add_device_eth(&kafa_eth_data);
+	/* USB Host */
+	at91_add_device_usbh(&kafa_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&kafa_udc_data);
+	/* I2C */
+	at91_add_device_i2c();
+	/* SPI */
+	at91_add_device_spi(NULL, 0);
+}
+
+MACHINE_START(KAFA, "Sperry-Sun KAFA")
+	/* Maintainer: Sergei Sharonov */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91rm9200_timer,
+	.map_io		= kafa_map_io,
+	.init_irq	= kafa_init_irq,
+	.init_machine	= kafa_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
new file mode 100644
index 0000000..17e68f5
--- /dev/null
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -0,0 +1,143 @@
+/*
+ * linux/arch/arm/mach-at91/board-kb9202.c
+ *
+ *  Copyright (c) 2005 kb_admin
+ *  		       KwikByte, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ *    0 .. 3 = USART0 .. USART3
+ *    4      = DBGU
+ */
+static struct at91_uart_config __initdata kb9202_uart_config = {
+	.console_tty	= 0,					/* ttyS0 */
+	.nr_tty		= 3,
+	.tty_map	= { 4, 0, 1, -1, -1 }			/* ttyS0, ..., ttyS4 */
+};
+
+static void __init kb9202_map_io(void)
+{
+	/* Initialize processor: 10 MHz crystal */
+	at91rm9200_initialize(10000000, AT91RM9200_PQFP);
+
+	/* Set up the LEDs */
+	at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
+
+	/* Setup the serial ports and console */
+	at91_init_serial(&kb9202_uart_config);
+}
+
+static void __init kb9202_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata kb9202_eth_data = {
+	.phy_irq_pin	= AT91_PIN_PB29,
+	.is_rmii	= 0,
+};
+
+static struct at91_usbh_data __initdata kb9202_usbh_data = {
+	.ports		= 1,
+};
+
+static struct at91_udc_data __initdata kb9202_udc_data = {
+	.vbus_pin	= AT91_PIN_PB24,
+	.pullup_pin	= AT91_PIN_PB22,
+};
+
+static struct at91_mmc_data __initdata kb9202_mmc_data = {
+	.det_pin	= AT91_PIN_PB2,
+	.slot_b		= 0,
+	.wire4		= 1,
+};
+
+static struct mtd_partition __initdata kb9202_nand_partition[] = {
+	{
+		.name	= "nand_fs",
+		.offset	= 0,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(kb9202_nand_partition);
+	return kb9202_nand_partition;
+}
+
+static struct at91_nand_data __initdata kb9202_nand_data = {
+	.ale		= 22,
+	.cle		= 21,
+	// .det_pin	= ... not there
+	.rdy_pin	= AT91_PIN_PC29,
+	.enable_pin	= AT91_PIN_PC28,
+	.partition_info	= nand_partitions,
+};
+
+static void __init kb9202_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* Ethernet */
+	at91_add_device_eth(&kb9202_eth_data);
+	/* USB Host */
+	at91_add_device_usbh(&kb9202_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&kb9202_udc_data);
+	/* MMC */
+	at91_add_device_mmc(&kb9202_mmc_data);
+	/* I2C */
+	at91_add_device_i2c();
+	/* SPI */
+	at91_add_device_spi(NULL, 0);
+	/* NAND */
+	at91_add_device_nand(&kb9202_nand_data);
+}
+
+MACHINE_START(KB9200, "KB920x")
+	/* Maintainer: KwikByte, Inc. */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91rm9200_timer,
+	.map_io		= kb9202_map_io,
+	.init_irq	= kb9202_init_irq,
+	.init_machine	= kb9202_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
new file mode 100644
index 0000000..6ae272d
--- /dev/null
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -0,0 +1,202 @@
+/*
+ * linux/arch/arm/mach-at91/board-ek.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2006 Atmel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam926x_mc.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ *    0 .. 5 = USART0 .. USART5
+ *    6      = DBGU
+ */
+static struct at91_uart_config __initdata ek_uart_config = {
+	.console_tty	= 0,				/* ttyS0 */
+	.nr_tty		= 3,
+	.tty_map	= { 6, 0, 1, -1, -1, -1, -1 }	/* ttyS0, ..., ttyS6 */
+};
+
+static void __init ek_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91sam9260_initialize(18432000);
+
+	/* Setup the serial ports and console */
+	at91_init_serial(&ek_uart_config);
+}
+
+static void __init ek_init_irq(void)
+{
+	at91sam9260_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+	.ports		= 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+	.vbus_pin	= AT91_PIN_PC5,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+#if !defined(CONFIG_MMC_AT91)
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 1,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+	{	/* DataFlash card */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+#endif
+#endif
+#if defined(CONFIG_SND_AT73C213)
+	{	/* AT73C213 DAC */
+		.modalias	= "snd_at73c213",
+		.chip_select	= 0,
+		.max_speed_hz	= 10 * 1000 * 1000,
+		.bus_num	= 1,
+	},
+#endif
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct __initdata at91_eth_data ek_macb_data = {
+	.phy_irq_pin	= AT91_PIN_PA7,
+	.is_rmii	= 1,
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+	{
+		.name	= "Partition 1",
+		.offset	= 0,
+		.size	= 256 * 1024,
+	},
+	{
+		.name	= "Partition 2",
+		.offset	= 256 * 1024,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(ek_nand_partition);
+	return ek_nand_partition;
+}
+
+static struct at91_nand_data __initdata ek_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+//	.det_pin	= ... not connected
+	.rdy_pin	= AT91_PIN_PC13,
+	.enable_pin	= AT91_PIN_PC14,
+	.partition_info	= nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+	.bus_width_16	= 1,
+#else
+	.bus_width_16	= 0,
+#endif
+};
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata ek_mmc_data = {
+	.slot_b		= 1,
+	.wire4		= 1,
+//	.det_pin	= ... not connected
+//	.wp_pin		= ... not connected
+//	.vcc_pin	= ... not connected
+};
+
+static void __init ek_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* USB Host */
+	at91_add_device_usbh(&ek_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&ek_udc_data);
+	/* SPI */
+	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+	/* NAND */
+	at91_add_device_nand(&ek_nand_data);
+	/* Ethernet */
+	at91_add_device_eth(&ek_macb_data);
+	/* MMC */
+	at91_add_device_mmc(&ek_mmc_data);
+}
+
+MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
+	/* Maintainer: Atmel */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= ek_map_io,
+	.init_irq	= ek_init_irq,
+	.init_machine	= ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
new file mode 100644
index 0000000..25d6263
--- /dev/null
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -0,0 +1,259 @@
+/*
+ * linux/arch/arm/mach-at91/board-ek.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2006 Atmel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/dm9000.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam926x_mc.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ *    0 .. 2 = USART0 .. USART2
+ *    3      = DBGU
+ */
+static struct at91_uart_config __initdata ek_uart_config = {
+	.console_tty	= 0,				/* ttyS0 */
+	.nr_tty		= 1,
+	.tty_map	= { 3, -1, -1, -1 }		/* ttyS0, ..., ttyS3 */
+};
+
+static void __init ek_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91sam9261_initialize(18432000);
+
+	/* Setup the serial ports and console */
+	at91_init_serial(&ek_uart_config);
+}
+
+static void __init ek_init_irq(void)
+{
+	at91sam9261_init_interrupts(NULL);
+}
+
+
+/*
+ * DM9000 ethernet device
+ */
+#if defined(CONFIG_DM9000)
+static struct resource at91sam9261_dm9000_resource[] = {
+	[0] = {
+		.start	= AT91_CHIPSELECT_2,
+		.end	= AT91_CHIPSELECT_2 + 3,
+		.flags	= IORESOURCE_MEM
+	},
+	[1] = {
+		.start	= AT91_CHIPSELECT_2 + 0x44,
+		.end	= AT91_CHIPSELECT_2 + 0xFF,
+		.flags	= IORESOURCE_MEM
+	},
+	[2] = {
+		.start	= AT91_PIN_PC11,
+		.end	= AT91_PIN_PC11,
+		.flags	= IORESOURCE_IRQ
+	}
+};
+
+static struct dm9000_plat_data dm9000_platdata = {
+	.flags		= DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device at91sam9261_dm9000_device = {
+	.name		= "dm9000",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(at91sam9261_dm9000_resource),
+	.resource	= at91sam9261_dm9000_resource,
+	.dev		= {
+		.platform_data	= &dm9000_platdata,
+	}
+};
+
+static void __init ek_add_device_dm9000(void)
+{
+	/*
+	 * Configure Chip-Select 2 on SMC for the DM9000.
+	 * Note: These timings were calculated for MASTER_CLOCK = 100000000
+	 *  according to the DM9000 timings.
+	 */
+	at91_sys_write(AT91_SMC_SETUP(2), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
+	at91_sys_write(AT91_SMC_PULSE(2), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(8) | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(8));
+	at91_sys_write(AT91_SMC_CYCLE(2), AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
+	at91_sys_write(AT91_SMC_MODE(2), AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 | AT91_SMC_TDF_(1));
+
+	/* Configure Reset signal as output */
+	at91_set_gpio_output(AT91_PIN_PC10, 0);
+
+	/* Configure Interrupt pin as input, no pull-up */
+	at91_set_gpio_input(AT91_PIN_PC11, 0);
+
+	platform_device_register(&at91sam9261_dm9000_device);
+}
+#else
+static void __init ek_add_device_dm9000(void) {}
+#endif /* CONFIG_DM9000 */
+
+
+/*
+ * USB Host Port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+	.ports		= 2,
+};
+
+
+/*
+ * USB Device Port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+	.vbus_pin	= AT91_PIN_PB29,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata ek_mmc_data = {
+	.wire4		= 1,
+//	.det_pin	= ... not connected
+//	.wp_pin		= ... not connected
+//	.vcc_pin	= ... not connected
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+	{
+		.name	= "Partition 1",
+		.offset	= 0,
+		.size	= 256 * 1024,
+	},
+	{
+		.name	= "Partition 2",
+		.offset	= 256 * 1024 ,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(ek_nand_partition);
+	return ek_nand_partition;
+}
+
+static struct at91_nand_data __initdata ek_nand_data = {
+	.ale		= 22,
+	.cle		= 21,
+//	.det_pin	= ... not connected
+	.rdy_pin	= AT91_PIN_PC15,
+	.enable_pin	= AT91_PIN_PC14,
+	.partition_info	= nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+	.bus_width_16	= 1,
+#else
+	.bus_width_16	= 0,
+#endif
+};
+
+/*
+ * SPI devices
+ */
+static struct spi_board_info ek_spi_devices[] = {
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+	{	/* DataFlash card - jumper (J12) configurable to CS3 or CS0 */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 3,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+#elif defined(CONFIG_SND_AT73C213)
+	{	/* AT73C213 DAC */
+		.modalias	= "snd_at73c213",
+		.chip_select	= 3,
+		.max_speed_hz	= 10 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+#endif
+};
+
+
+static void __init ek_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* USB Host */
+	at91_add_device_usbh(&ek_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&ek_udc_data);
+	/* I2C */
+	at91_add_device_i2c();
+	/* NAND */
+	at91_add_device_nand(&ek_nand_data);
+	/* DM9000 ethernet */
+	ek_add_device_dm9000();
+
+	/* spi0 and mmc/sd share the same PIO pins */
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+	/* SPI */
+	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+#else
+	/* MMC */
+	at91_add_device_mmc(&ek_mmc_data);
+#endif
+}
+
+MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
+	/* Maintainer: Atmel */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= ek_map_io,
+	.init_irq	= ek_init_irq,
+	.init_machine	= ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
new file mode 100644
index 0000000..baab095
--- /dev/null
+++ b/arch/arm/mach-at91/clock.c
@@ -0,0 +1,644 @@
+/*
+ * linux/arch/arm/mach-at91/clock.c
+ *
+ * Copyright (C) 2005 David Brownell
+ * Copyright (C) 2005 Ivan Kokshaysky
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+
+#include <asm/semaphore.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/cpu.h>
+
+#include "clock.h"
+
+
+/*
+ * There's a lot more which can be done with clocks, including cpufreq
+ * integration, slow clock mode support (for system suspend), letting
+ * PLLB be used at other rates (on boards that don't need USB), etc.
+ */
+
+#define clk_is_primary(x)	((x)->type & CLK_TYPE_PRIMARY)
+#define clk_is_programmable(x)	((x)->type & CLK_TYPE_PROGRAMMABLE)
+#define clk_is_peripheral(x)	((x)->type & CLK_TYPE_PERIPHERAL)
+#define clk_is_sys(x)		((x)->type & CLK_TYPE_SYSTEM)
+
+
+static LIST_HEAD(clocks);
+static DEFINE_SPINLOCK(clk_lock);
+
+static u32 at91_pllb_usb_init;
+
+/*
+ * Four primary clock sources:  two crystal oscillators (32K, main), and
+ * two PLLs.  PLLA usually runs the master clock; and PLLB must run at
+ * 48 MHz (unless no USB function clocks are needed).  The main clock and
+ * both PLLs are turned off to run in "slow clock mode" (system suspend).
+ */
+static struct clk clk32k = {
+	.name		= "clk32k",
+	.rate_hz	= AT91_SLOW_CLOCK,
+	.users		= 1,		/* always on */
+	.id		= 0,
+	.type		= CLK_TYPE_PRIMARY,
+};
+static struct clk main_clk = {
+	.name		= "main",
+	.pmc_mask	= AT91_PMC_MOSCS,	/* in PMC_SR */
+	.id		= 1,
+	.type		= CLK_TYPE_PRIMARY,
+};
+static struct clk plla = {
+	.name		= "plla",
+	.parent		= &main_clk,
+	.pmc_mask	= AT91_PMC_LOCKA,	/* in PMC_SR */
+	.id		= 2,
+	.type		= CLK_TYPE_PRIMARY | CLK_TYPE_PLL,
+};
+
+static void pllb_mode(struct clk *clk, int is_on)
+{
+	u32	value;
+
+	if (is_on) {
+		is_on = AT91_PMC_LOCKB;
+		value = at91_pllb_usb_init;
+	} else
+		value = 0;
+
+	// REVISIT: Add work-around for AT91RM9200 Errata #26 ?
+	at91_sys_write(AT91_CKGR_PLLBR, value);
+
+	do {
+		cpu_relax();
+	} while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != is_on);
+}
+
+static struct clk pllb = {
+	.name		= "pllb",
+	.parent		= &main_clk,
+	.pmc_mask	= AT91_PMC_LOCKB,	/* in PMC_SR */
+	.mode		= pllb_mode,
+	.id		= 3,
+	.type		= CLK_TYPE_PRIMARY | CLK_TYPE_PLL,
+};
+
+static void pmc_sys_mode(struct clk *clk, int is_on)
+{
+	if (is_on)
+		at91_sys_write(AT91_PMC_SCER, clk->pmc_mask);
+	else
+		at91_sys_write(AT91_PMC_SCDR, clk->pmc_mask);
+}
+
+/* USB function clocks (PLLB must be 48 MHz) */
+static struct clk udpck = {
+	.name		= "udpck",
+	.parent		= &pllb,
+	.mode		= pmc_sys_mode,
+};
+static struct clk uhpck = {
+	.name		= "uhpck",
+	.parent		= &pllb,
+	.mode		= pmc_sys_mode,
+};
+
+
+/*
+ * The master clock is divided from the CPU clock (by 1-4).  It's used for
+ * memory, interfaces to on-chip peripherals, the AIC, and sometimes more
+ * (e.g baud rate generation).  It's sourced from one of the primary clocks.
+ */
+static struct clk mck = {
+	.name		= "mck",
+	.pmc_mask	= AT91_PMC_MCKRDY,	/* in PMC_SR */
+};
+
+static void pmc_periph_mode(struct clk *clk, int is_on)
+{
+	if (is_on)
+		at91_sys_write(AT91_PMC_PCER, clk->pmc_mask);
+	else
+		at91_sys_write(AT91_PMC_PCDR, clk->pmc_mask);
+}
+
+static struct clk __init *at91_css_to_clk(unsigned long css)
+{
+	switch (css) {
+		case AT91_PMC_CSS_SLOW:
+			return &clk32k;
+		case AT91_PMC_CSS_MAIN:
+			return &main_clk;
+		case AT91_PMC_CSS_PLLA:
+			return &plla;
+		case AT91_PMC_CSS_PLLB:
+			return &pllb;
+	}
+
+	return NULL;
+}
+
+/*
+ * Associate a particular clock with a function (eg, "uart") and device.
+ * The drivers can then request the same 'function' with several different
+ * devices and not care about which clock name to use.
+ */
+void __init at91_clock_associate(const char *id, struct device *dev, const char *func)
+{
+	struct clk *clk = clk_get(NULL, id);
+
+	if (!dev || !clk || !IS_ERR(clk_get(dev, func)))
+		return;
+
+	clk->function = func;
+	clk->dev = dev;
+}
+
+/* clocks cannot be de-registered no refcounting necessary */
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	struct clk *clk;
+
+	list_for_each_entry(clk, &clocks, node) {
+		if (strcmp(id, clk->name) == 0)
+			return clk;
+		if (clk->function && (dev == clk->dev) && strcmp(id, clk->function) == 0)
+			return clk;
+	}
+
+	return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
+static void __clk_enable(struct clk *clk)
+{
+	if (clk->parent)
+		__clk_enable(clk->parent);
+	if (clk->users++ == 0 && clk->mode)
+		clk->mode(clk, 1);
+}
+
+int clk_enable(struct clk *clk)
+{
+	unsigned long	flags;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	__clk_enable(clk);
+	spin_unlock_irqrestore(&clk_lock, flags);
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+static void __clk_disable(struct clk *clk)
+{
+	BUG_ON(clk->users == 0);
+	if (--clk->users == 0 && clk->mode)
+		clk->mode(clk, 0);
+	if (clk->parent)
+		__clk_disable(clk->parent);
+}
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long	flags;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	__clk_disable(clk);
+	spin_unlock_irqrestore(&clk_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	unsigned long	flags;
+	unsigned long	rate;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	for (;;) {
+		rate = clk->rate_hz;
+		if (rate || !clk->parent)
+			break;
+		clk = clk->parent;
+	}
+	spin_unlock_irqrestore(&clk_lock, flags);
+	return rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/*------------------------------------------------------------------------*/
+
+#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
+
+/*
+ * For now, only the programmable clocks support reparenting (MCK could
+ * do this too, with care) or rate changing (the PLLs could do this too,
+ * ditto MCK but that's more for cpufreq).  Drivers may reparent to get
+ * a better rate match; we don't.
+ */
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long	flags;
+	unsigned	prescale;
+	unsigned long	actual;
+
+	if (!clk_is_programmable(clk))
+		return -EINVAL;
+	spin_lock_irqsave(&clk_lock, flags);
+
+	actual = clk->parent->rate_hz;
+	for (prescale = 0; prescale < 7; prescale++) {
+		if (actual && actual <= rate)
+			break;
+		actual >>= 1;
+	}
+
+	spin_unlock_irqrestore(&clk_lock, flags);
+	return (prescale < 7) ? actual : -ENOENT;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long	flags;
+	unsigned	prescale;
+	unsigned long	actual;
+
+	if (!clk_is_programmable(clk))
+		return -EINVAL;
+	if (clk->users)
+		return -EBUSY;
+	spin_lock_irqsave(&clk_lock, flags);
+
+	actual = clk->parent->rate_hz;
+	for (prescale = 0; prescale < 7; prescale++) {
+		if (actual && actual <= rate) {
+			u32	pckr;
+
+			pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
+			pckr &= AT91_PMC_CSS_PLLB;	/* clock selection */
+			pckr |= prescale << 2;
+			at91_sys_write(AT91_PMC_PCKR(clk->id), pckr);
+			clk->rate_hz = actual;
+			break;
+		}
+		actual >>= 1;
+	}
+
+	spin_unlock_irqrestore(&clk_lock, flags);
+	return (prescale < 7) ? actual : -ENOENT;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+	return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	unsigned long	flags;
+
+	if (clk->users)
+		return -EBUSY;
+	if (!clk_is_primary(parent) || !clk_is_programmable(clk))
+		return -EINVAL;
+	spin_lock_irqsave(&clk_lock, flags);
+
+	clk->rate_hz = parent->rate_hz;
+	clk->parent = parent;
+	at91_sys_write(AT91_PMC_PCKR(clk->id), parent->id);
+
+	spin_unlock_irqrestore(&clk_lock, flags);
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+/* establish PCK0..PCK3 parentage and rate */
+static void init_programmable_clock(struct clk *clk)
+{
+	struct clk	*parent;
+	u32		pckr;
+
+	pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
+	parent = at91_css_to_clk(pckr & AT91_PMC_CSS);
+	clk->parent = parent;
+	clk->rate_hz = parent->rate_hz / (1 << ((pckr >> 2) & 3));
+}
+
+#endif	/* CONFIG_AT91_PROGRAMMABLE_CLOCKS */
+
+/*------------------------------------------------------------------------*/
+
+#ifdef CONFIG_DEBUG_FS
+
+static int at91_clk_show(struct seq_file *s, void *unused)
+{
+	u32		scsr, pcsr, sr;
+	struct clk	*clk;
+	unsigned	i;
+
+	seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR));
+	seq_printf(s, "PCSR = %8x\n", pcsr = at91_sys_read(AT91_PMC_PCSR));
+
+	seq_printf(s, "MOR  = %8x\n", at91_sys_read(AT91_CKGR_MOR));
+	seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR));
+	seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
+	seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
+
+	seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
+	for (i = 0; i < 4; i++)
+		seq_printf(s, "PCK%d = %8x\n", i, at91_sys_read(AT91_PMC_PCKR(i)));
+	seq_printf(s, "SR   = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
+
+	seq_printf(s, "\n");
+
+	list_for_each_entry(clk, &clocks, node) {
+		char	*state;
+
+		if (clk->mode == pmc_sys_mode)
+			state = (scsr & clk->pmc_mask) ? "on" : "off";
+		else if (clk->mode == pmc_periph_mode)
+			state = (pcsr & clk->pmc_mask) ? "on" : "off";
+		else if (clk->pmc_mask)
+			state = (sr & clk->pmc_mask) ? "on" : "off";
+		else if (clk == &clk32k || clk == &main_clk)
+			state = "on";
+		else
+			state = "";
+
+		seq_printf(s, "%-10s users=%2d %-3s %9ld Hz %s\n",
+			clk->name, clk->users, state, clk_get_rate(clk),
+			clk->parent ? clk->parent->name : "");
+	}
+	return 0;
+}
+
+static int at91_clk_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, at91_clk_show, NULL);
+}
+
+static struct file_operations at91_clk_operations = {
+	.open		= at91_clk_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init at91_clk_debugfs_init(void)
+{
+	/* /sys/kernel/debug/at91_clk */
+	(void) debugfs_create_file("at91_clk", S_IFREG | S_IRUGO, NULL, NULL, &at91_clk_operations);
+
+	return 0;
+}
+postcore_initcall(at91_clk_debugfs_init);
+
+#endif
+
+/*------------------------------------------------------------------------*/
+
+/* Register a new clock */
+int __init clk_register(struct clk *clk)
+{
+	if (clk_is_peripheral(clk)) {
+		clk->parent = &mck;
+		clk->mode = pmc_periph_mode;
+		list_add_tail(&clk->node, &clocks);
+	}
+	else if (clk_is_sys(clk)) {
+		clk->parent = &mck;
+		clk->mode = pmc_sys_mode;
+
+		list_add_tail(&clk->node, &clocks);
+	}
+#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
+	else if (clk_is_programmable(clk)) {
+		clk->mode = pmc_sys_mode;
+		init_programmable_clock(clk);
+		list_add_tail(&clk->node, &clocks);
+	}
+#endif
+
+	return 0;
+}
+
+
+/*------------------------------------------------------------------------*/
+
+static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg)
+{
+	unsigned mul, div;
+
+	div = reg & 0xff;
+	mul = (reg >> 16) & 0x7ff;
+	if (div && mul) {
+		freq /= div;
+		freq *= mul + 1;
+	} else
+		freq = 0;
+
+	return freq;
+}
+
+static u32 __init at91_usb_rate(struct clk *pll, u32 freq, u32 reg)
+{
+	if (pll == &pllb && (reg & AT91_PMC_USB96M))
+		return freq / 2;
+	else
+		return freq;
+}
+
+static unsigned __init at91_pll_calc(unsigned main_freq, unsigned out_freq)
+{
+	unsigned i, div = 0, mul = 0, diff = 1 << 30;
+	unsigned ret = (out_freq > 155000000) ? 0xbe00 : 0x3e00;
+
+	/* PLL output max 240 MHz (or 180 MHz per errata) */
+	if (out_freq > 240000000)
+		goto fail;
+
+	for (i = 1; i < 256; i++) {
+		int diff1;
+		unsigned input, mul1;
+
+		/*
+		 * PLL input between 1MHz and 32MHz per spec, but lower
+		 * frequences seem necessary in some cases so allow 100K.
+		 */
+		input = main_freq / i;
+		if (input < 100000)
+			continue;
+		if (input > 32000000)
+			continue;
+
+		mul1 = out_freq / input;
+		if (mul1 > 2048)
+			continue;
+		if (mul1 < 2)
+			goto fail;
+
+		diff1 = out_freq - input * mul1;
+		if (diff1 < 0)
+			diff1 = -diff1;
+		if (diff > diff1) {
+			diff = diff1;
+			div = i;
+			mul = mul1;
+			if (diff == 0)
+				break;
+		}
+	}
+	if (i == 256 && diff > (out_freq >> 5))
+		goto fail;
+	return ret | ((mul - 1) << 16) | div;
+fail:
+	return 0;
+}
+
+/*
+ * Several unused clocks may be active.  Turn them off.
+ */
+static void __init at91_periphclk_reset(void)
+{
+	unsigned long reg;
+	struct clk *clk;
+
+	reg = at91_sys_read(AT91_PMC_PCSR);
+
+	list_for_each_entry(clk, &clocks, node) {
+		if (clk->mode != pmc_periph_mode)
+			continue;
+
+		if (clk->users > 0)
+			reg &= ~clk->pmc_mask;
+	}
+
+	at91_sys_write(AT91_PMC_PCDR, reg);
+}
+
+static struct clk *const standard_pmc_clocks[] __initdata = {
+	/* four primary clocks */
+	&clk32k,
+	&main_clk,
+	&plla,
+	&pllb,
+
+	/* PLLB children (USB) */
+	&udpck,
+	&uhpck,
+
+	/* MCK */
+	&mck
+};
+
+int __init at91_clock_init(unsigned long main_clock)
+{
+	unsigned tmp, freq, mckr;
+	int i;
+
+	/*
+	 * When the bootloader initialized the main oscillator correctly,
+	 * there's no problem using the cycle counter.  But if it didn't,
+	 * or when using oscillator bypass mode, we must be told the speed
+	 * of the main clock.
+	 */
+	if (!main_clock) {
+		do {
+			tmp = at91_sys_read(AT91_CKGR_MCFR);
+		} while (!(tmp & AT91_PMC_MAINRDY));
+		main_clock = (tmp & AT91_PMC_MAINF) * (AT91_SLOW_CLOCK / 16);
+	}
+	main_clk.rate_hz = main_clock;
+
+	/* report if PLLA is more than mildly overclocked */
+	plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
+	if (plla.rate_hz > 209000000)
+		pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
+
+	/*
+	 * USB clock init:  choose 48 MHz PLLB value, turn all clocks off,
+	 * disable 48MHz clock during usb peripheral suspend.
+	 *
+	 * REVISIT:  assumes MCK doesn't derive from PLLB!
+	 */
+	at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
+	pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
+	if (cpu_is_at91rm9200()) {
+		uhpck.pmc_mask = AT91RM9200_PMC_UHP;
+		udpck.pmc_mask = AT91RM9200_PMC_UDP;
+		at91_sys_write(AT91_PMC_SCDR, AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP);
+		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
+	} else if (cpu_is_at91sam9260()) {
+		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
+		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
+		at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP);
+	} else if (cpu_is_at91sam9261()) {
+		uhpck.pmc_mask = (AT91SAM926x_PMC_UHP | AT91_PMC_HCK0);
+		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
+		at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91_PMC_HCK0 | AT91SAM926x_PMC_UDP);
+	}
+	at91_sys_write(AT91_CKGR_PLLBR, 0);
+
+	udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+	uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+
+	/*
+	 * MCK and CPU derive from one of those primary clocks.
+	 * For now, assume this parentage won't change.
+	 */
+	mckr = at91_sys_read(AT91_PMC_MCKR);
+	mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS);
+	freq = mck.parent->rate_hz;
+	freq /= (1 << ((mckr >> 2) & 3));		/* prescale */
+	mck.rate_hz = freq / (1 + ((mckr >> 8) & 3));	/* mdiv */
+
+	/* Register the PMC's standard clocks */
+	for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
+		list_add_tail(&standard_pmc_clocks[i]->node, &clocks);
+
+	/* MCK and CPU clock are "always on" */
+	clk_enable(&mck);
+
+	printk("Clocks: CPU %u MHz, master %u MHz, main %u.%03u MHz\n",
+		freq / 1000000, (unsigned) mck.rate_hz / 1000000,
+		(unsigned) main_clock / 1000000,
+		((unsigned) main_clock % 1000000) / 1000);
+
+	/* disable all programmable clocks */
+	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK0 | AT91_PMC_PCK1 | AT91_PMC_PCK2 | AT91_PMC_PCK3);
+
+	/* disable all other unused peripheral clocks */
+	at91_periphclk_reset();
+
+	return 0;
+}
diff --git a/arch/arm/mach-at91/clock.h b/arch/arm/mach-at91/clock.h
new file mode 100644
index 0000000..1ba3b95
--- /dev/null
+++ b/arch/arm/mach-at91/clock.h
@@ -0,0 +1,31 @@
+/*
+ * linux/arch/arm/mach-at91/clock.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define CLK_TYPE_PRIMARY	0x1
+#define CLK_TYPE_PLL		0x2
+#define CLK_TYPE_PROGRAMMABLE	0x4
+#define CLK_TYPE_PERIPHERAL	0x8
+#define CLK_TYPE_SYSTEM		0x10
+
+
+struct clk {
+	struct list_head node;
+	const char	*name;		/* unique clock name */
+	const char	*function;	/* function of the clock */
+	struct device	*dev;		/* device associated with function */
+	unsigned long	rate_hz;
+	struct clk	*parent;
+	u32		pmc_mask;
+	void		(*mode)(struct clk *, int);
+	unsigned	id:2;		/* PCK0..3, or 32k/main/a/b */
+	unsigned	type;		/* clock type */
+	u16		users;
+};
+
+
+extern int __init clk_register(struct clk *clk);
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
new file mode 100644
index 0000000..10ee37b
--- /dev/null
+++ b/arch/arm/mach-at91/generic.h
@@ -0,0 +1,49 @@
+/*
+ * linux/arch/arm/mach-at91/generic.h
+ *
+ *  Copyright (C) 2005 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+ /* Processors */
+extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks);
+extern void __init at91sam9260_initialize(unsigned long main_clock);
+extern void __init at91sam9261_initialize(unsigned long main_clock);
+
+ /* Interrupts */
+extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
+extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
+extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
+extern void __init at91_aic_init(unsigned int priority[]);
+
+ /* Timer */
+struct sys_timer;
+extern struct sys_timer at91rm9200_timer;
+extern struct sys_timer at91sam926x_timer;
+
+ /* Clocks */
+extern int __init at91_clock_init(unsigned long main_clock);
+struct device;
+extern void __init at91_clock_associate(const char *id, struct device *dev, const char *func);
+
+ /* Power Management */
+extern void at91_irq_suspend(void);
+extern void at91_irq_resume(void);
+
+ /* GPIO */
+#define AT91RM9200_PQFP		3	/* AT91RM9200 PQFP package has 3 banks */
+#define AT91RM9200_BGA		4	/* AT91RM9200 BGA package has 4 banks */
+
+struct at91_gpio_bank {
+	unsigned short id;		/* peripheral ID */
+	unsigned long offset;		/* offset from system peripheral base */
+	struct clk *clock;		/* associated clock */
+};
+extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks);
+extern void __init at91_gpio_irq_setup(void);
+
+extern void (*at91_arch_reset)(void);
+extern int at91_extern_irq;
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
new file mode 100644
index 0000000..9b7495c
--- /dev/null
+++ b/arch/arm/mach-at91/gpio.c
@@ -0,0 +1,414 @@
+/*
+ * linux/arch/arm/mach-at91/gpio.c
+ *
+ * Copyright (C) 2005 HP Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/arch/at91_pio.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+
+static struct at91_gpio_bank *gpio;
+static int gpio_banks;
+
+
+static inline void __iomem *pin_to_controller(unsigned pin)
+{
+	void __iomem *sys_base = (void __iomem *) AT91_VA_BASE_SYS;
+
+	pin -= PIN_BASE;
+	pin /= 32;
+	if (likely(pin < gpio_banks))
+		return sys_base + gpio[pin].offset;
+
+	return NULL;
+}
+
+static inline unsigned pin_to_mask(unsigned pin)
+{
+	pin -= PIN_BASE;
+	return 1 << (pin % 32);
+}
+
+
+/*--------------------------------------------------------------------------*/
+
+/* Not all hardware capabilities are exposed through these calls; they
+ * only encapsulate the most common features and modes.  (So if you
+ * want to change signals in groups, do it directly.)
+ *
+ * Bootloaders will usually handle some of the pin multiplexing setup.
+ * The intent is certainly that by the time Linux is fully booted, all
+ * pins should have been fully initialized.  These setup calls should
+ * only be used by board setup routines, or possibly in driver probe().
+ *
+ * For bootloaders doing all that setup, these calls could be inlined
+ * as NOPs so Linux won't duplicate any setup code
+ */
+
+
+/*
+ * mux the pin to the "A" internal peripheral role.
+ */
+int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup)
+{
+	void __iomem	*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	if (!pio)
+		return -EINVAL;
+
+	__raw_writel(mask, pio + PIO_IDR);
+	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
+	__raw_writel(mask, pio + PIO_ASR);
+	__raw_writel(mask, pio + PIO_PDR);
+	return 0;
+}
+EXPORT_SYMBOL(at91_set_A_periph);
+
+
+/*
+ * mux the pin to the "B" internal peripheral role.
+ */
+int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup)
+{
+	void __iomem	*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	if (!pio)
+		return -EINVAL;
+
+	__raw_writel(mask, pio + PIO_IDR);
+	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
+	__raw_writel(mask, pio + PIO_BSR);
+	__raw_writel(mask, pio + PIO_PDR);
+	return 0;
+}
+EXPORT_SYMBOL(at91_set_B_periph);
+
+
+/*
+ * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and
+ * configure it for an input.
+ */
+int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup)
+{
+	void __iomem	*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	if (!pio)
+		return -EINVAL;
+
+	__raw_writel(mask, pio + PIO_IDR);
+	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
+	__raw_writel(mask, pio + PIO_ODR);
+	__raw_writel(mask, pio + PIO_PER);
+	return 0;
+}
+EXPORT_SYMBOL(at91_set_gpio_input);
+
+
+/*
+ * mux the pin to the gpio controller (instead of "A" or "B" peripheral),
+ * and configure it for an output.
+ */
+int __init_or_module at91_set_gpio_output(unsigned pin, int value)
+{
+	void __iomem	*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	if (!pio)
+		return -EINVAL;
+
+	__raw_writel(mask, pio + PIO_IDR);
+	__raw_writel(mask, pio + PIO_PUDR);
+	__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
+	__raw_writel(mask, pio + PIO_OER);
+	__raw_writel(mask, pio + PIO_PER);
+	return 0;
+}
+EXPORT_SYMBOL(at91_set_gpio_output);
+
+
+/*
+ * enable/disable the glitch filter; mostly used with IRQ handling.
+ */
+int __init_or_module at91_set_deglitch(unsigned pin, int is_on)
+{
+	void __iomem	*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	if (!pio)
+		return -EINVAL;
+	__raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR));
+	return 0;
+}
+EXPORT_SYMBOL(at91_set_deglitch);
+
+/*
+ * enable/disable the multi-driver; This is only valid for output and
+ * allows the output pin to run as an open collector output.
+ */
+int __init_or_module at91_set_multi_drive(unsigned pin, int is_on)
+{
+	void __iomem	*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	if (!pio)
+		return -EINVAL;
+
+	__raw_writel(mask, pio + (is_on ? PIO_MDER : PIO_MDDR));
+	return 0;
+}
+EXPORT_SYMBOL(at91_set_multi_drive);
+
+/*--------------------------------------------------------------------------*/
+
+/*
+ * assuming the pin is muxed as a gpio output, set its value.
+ */
+int at91_set_gpio_value(unsigned pin, int value)
+{
+	void __iomem	*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	if (!pio)
+		return -EINVAL;
+	__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
+	return 0;
+}
+EXPORT_SYMBOL(at91_set_gpio_value);
+
+
+/*
+ * read the pin's value (works even if it's not muxed as a gpio).
+ */
+int at91_get_gpio_value(unsigned pin)
+{
+	void __iomem	*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+	u32		pdsr;
+
+	if (!pio)
+		return -EINVAL;
+	pdsr = __raw_readl(pio + PIO_PDSR);
+	return (pdsr & mask) != 0;
+}
+EXPORT_SYMBOL(at91_get_gpio_value);
+
+/*--------------------------------------------------------------------------*/
+
+#ifdef CONFIG_PM
+
+static u32 wakeups[MAX_GPIO_BANKS];
+static u32 backups[MAX_GPIO_BANKS];
+
+static int gpio_irq_set_wake(unsigned pin, unsigned state)
+{
+	unsigned	mask = pin_to_mask(pin);
+	unsigned	bank = (pin - PIN_BASE) / 32;
+
+	if (unlikely(bank >= MAX_GPIO_BANKS))
+		return -EINVAL;
+
+	if (state)
+		wakeups[bank] |= mask;
+	else
+		wakeups[bank] &= ~mask;
+
+	set_irq_wake(gpio[bank].id, state);
+
+	return 0;
+}
+
+void at91_gpio_suspend(void)
+{
+	int i;
+
+	for (i = 0; i < gpio_banks; i++) {
+		u32 pio = gpio[i].offset;
+
+		backups[i] = at91_sys_read(pio + PIO_IMR);
+		at91_sys_write(pio + PIO_IDR, backups[i]);
+		at91_sys_write(pio + PIO_IER, wakeups[i]);
+
+		if (!wakeups[i])
+			clk_disable(gpio[i].clock);
+		else {
+#ifdef CONFIG_PM_DEBUG
+			printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]);
+#endif
+		}
+	}
+}
+
+void at91_gpio_resume(void)
+{
+	int i;
+
+	for (i = 0; i < gpio_banks; i++) {
+		u32 pio = gpio[i].offset;
+
+		if (!wakeups[i])
+			clk_enable(gpio[i].clock);
+
+		at91_sys_write(pio + PIO_IDR, wakeups[i]);
+		at91_sys_write(pio + PIO_IER, backups[i]);
+	}
+}
+
+#else
+#define gpio_irq_set_wake	NULL
+#endif
+
+
+/* Several AIC controller irqs are dispatched through this GPIO handler.
+ * To use any AT91_PIN_* as an externally triggered IRQ, first call
+ * at91_set_gpio_input() then maybe enable its glitch filter.
+ * Then just request_irq() with the pin ID; it works like any ARM IRQ
+ * handler, though it always triggers on rising and falling edges.
+ *
+ * Alternatively, certain pins may be used directly as IRQ0..IRQ6 after
+ * configuring them with at91_set_a_periph() or at91_set_b_periph().
+ * IRQ0..IRQ6 should be configurable, e.g. level vs edge triggering.
+ */
+
+static void gpio_irq_mask(unsigned pin)
+{
+	void __iomem	*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	if (pio)
+		__raw_writel(mask, pio + PIO_IDR);
+}
+
+static void gpio_irq_unmask(unsigned pin)
+{
+	void __iomem	*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	if (pio)
+		__raw_writel(mask, pio + PIO_IER);
+}
+
+static int gpio_irq_type(unsigned pin, unsigned type)
+{
+	return (type == IRQT_BOTHEDGE) ? 0 : -EINVAL;
+}
+
+static struct irq_chip gpio_irqchip = {
+	.name		= "GPIO",
+	.mask		= gpio_irq_mask,
+	.unmask		= gpio_irq_unmask,
+	.set_type	= gpio_irq_type,
+	.set_wake	= gpio_irq_set_wake,
+};
+
+static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+	unsigned	pin;
+	struct irq_desc	*gpio;
+	void __iomem	*pio;
+	u32		isr;
+
+	pio = get_irq_chip_data(irq);
+
+	/* temporarily mask (level sensitive) parent IRQ */
+	desc->chip->ack(irq);
+	for (;;) {
+		/* reading ISR acks the pending (edge triggered) GPIO interrupt */
+		isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR);
+		if (!isr)
+			break;
+
+		pin = (unsigned) get_irq_data(irq);
+		gpio = &irq_desc[pin];
+
+		while (isr) {
+			if (isr & 1) {
+				if (unlikely(gpio->depth)) {
+					/*
+					 * The core ARM interrupt handler lazily disables IRQs so
+					 * another IRQ must be generated before it actually gets
+					 * here to be disabled on the GPIO controller.
+					 */
+					gpio_irq_mask(pin);
+				}
+				else
+					desc_handle_irq(pin, gpio);
+			}
+			pin++;
+			gpio++;
+			isr >>= 1;
+		}
+	}
+	desc->chip->unmask(irq);
+	/* now it may re-trigger */
+}
+
+/*--------------------------------------------------------------------------*/
+
+/*
+ * Called from the processor-specific init to enable GPIO interrupt support.
+ */
+void __init at91_gpio_irq_setup(void)
+{
+	unsigned	pioc, pin;
+
+	for (pioc = 0, pin = PIN_BASE;
+			pioc < gpio_banks;
+			pioc++) {
+		void __iomem	*controller;
+		unsigned	id = gpio[pioc].id;
+		unsigned	i;
+
+		clk_enable(gpio[pioc].clock);	/* enable PIO controller's clock */
+
+		controller = (void __iomem *) AT91_VA_BASE_SYS + gpio[pioc].offset;
+		__raw_writel(~0, controller + PIO_IDR);
+
+		set_irq_data(id, (void *) pin);
+		set_irq_chip_data(id, controller);
+
+		for (i = 0; i < 32; i++, pin++) {
+			/*
+			 * Can use the "simple" and not "edge" handler since it's
+			 * shorter, and the AIC handles interupts sanely.
+			 */
+			set_irq_chip(pin, &gpio_irqchip);
+			set_irq_handler(pin, handle_simple_irq);
+			set_irq_flags(pin, IRQF_VALID);
+		}
+
+		set_irq_chained_handler(id, gpio_irq_handler);
+	}
+	pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks);
+}
+
+/*
+ * Called from the processor-specific init to enable GPIO pin support.
+ */
+void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
+{
+	BUG_ON(nr_banks > MAX_GPIO_BANKS);
+
+	gpio = data;
+	gpio_banks = nr_banks;
+}
diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c
new file mode 100644
index 0000000..78a5cdb
--- /dev/null
+++ b/arch/arm/mach-at91/irq.c
@@ -0,0 +1,168 @@
+/*
+ * linux/arch/arm/mach-at91/irq.c
+ *
+ *  Copyright (C) 2004 SAN People
+ *  Copyright (C) 2004 ATMEL
+ *  Copyright (C) Rick Bronson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/types.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/setup.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+
+
+static void at91_aic_mask_irq(unsigned int irq)
+{
+	/* Disable interrupt on AIC */
+	at91_sys_write(AT91_AIC_IDCR, 1 << irq);
+}
+
+static void at91_aic_unmask_irq(unsigned int irq)
+{
+	/* Enable interrupt on AIC */
+	at91_sys_write(AT91_AIC_IECR, 1 << irq);
+}
+
+unsigned int at91_extern_irq;
+
+#define is_extern_irq(irq) ((1 << (irq)) & at91_extern_irq)
+
+static int at91_aic_set_type(unsigned irq, unsigned type)
+{
+	unsigned int smr, srctype;
+
+	switch (type) {
+	case IRQT_HIGH:
+		srctype = AT91_AIC_SRCTYPE_HIGH;
+		break;
+	case IRQT_RISING:
+		srctype = AT91_AIC_SRCTYPE_RISING;
+		break;
+	case IRQT_LOW:
+		if ((irq == AT91_ID_FIQ) || is_extern_irq(irq))		/* only supported on external interrupts */
+			srctype = AT91_AIC_SRCTYPE_LOW;
+		else
+			return -EINVAL;
+		break;
+	case IRQT_FALLING:
+		if ((irq == AT91_ID_FIQ) || is_extern_irq(irq))		/* only supported on external interrupts */
+			srctype = AT91_AIC_SRCTYPE_FALLING;
+		else
+			return -EINVAL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	smr = at91_sys_read(AT91_AIC_SMR(irq)) & ~AT91_AIC_SRCTYPE;
+	at91_sys_write(AT91_AIC_SMR(irq), smr | srctype);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+static u32 wakeups;
+static u32 backups;
+
+static int at91_aic_set_wake(unsigned irq, unsigned value)
+{
+	if (unlikely(irq >= 32))
+		return -EINVAL;
+
+	if (value)
+		wakeups |= (1 << irq);
+	else
+		wakeups &= ~(1 << irq);
+
+	return 0;
+}
+
+void at91_irq_suspend(void)
+{
+	backups = at91_sys_read(AT91_AIC_IMR);
+	at91_sys_write(AT91_AIC_IDCR, backups);
+	at91_sys_write(AT91_AIC_IECR, wakeups);
+}
+
+void at91_irq_resume(void)
+{
+	at91_sys_write(AT91_AIC_IDCR, wakeups);
+	at91_sys_write(AT91_AIC_IECR, backups);
+}
+
+#else
+#define at91_aic_set_wake	NULL
+#endif
+
+static struct irq_chip at91_aic_chip = {
+	.name		= "AIC",
+	.ack		= at91_aic_mask_irq,
+	.mask		= at91_aic_mask_irq,
+	.unmask		= at91_aic_unmask_irq,
+	.set_type	= at91_aic_set_type,
+	.set_wake	= at91_aic_set_wake,
+};
+
+/*
+ * Initialize the AIC interrupt controller.
+ */
+void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS])
+{
+	unsigned int i;
+
+	/*
+	 * The IVR is used by macro get_irqnr_and_base to read and verify.
+	 * The irq number is NR_AIC_IRQS when a spurious interrupt has occurred.
+	 */
+	for (i = 0; i < NR_AIC_IRQS; i++) {
+		/* Put irq number in Source Vector Register: */
+		at91_sys_write(AT91_AIC_SVR(i), i);
+		/* Active Low interrupt, with the specified priority */
+		at91_sys_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);
+
+		set_irq_chip(i, &at91_aic_chip);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+
+		/* Perform 8 End Of Interrupt Command to make sure AIC will not Lock out nIRQ */
+		if (i < 8)
+			at91_sys_write(AT91_AIC_EOICR, 0);
+	}
+
+	/*
+	 * Spurious Interrupt ID in Spurious Vector Register is NR_AIC_IRQS
+	 * When there is no current interrupt, the IRQ Vector Register reads the value stored in AIC_SPU
+	 */
+	at91_sys_write(AT91_AIC_SPU, NR_AIC_IRQS);
+
+	/* No debugging in AIC: Debug (Protect) Control Register */
+	at91_sys_write(AT91_AIC_DCR, 0);
+
+	/* Disable and clear all interrupts initially */
+	at91_sys_write(AT91_AIC_IDCR, 0xFFFFFFFF);
+	at91_sys_write(AT91_AIC_ICCR, 0xFFFFFFFF);
+}
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
new file mode 100644
index 0000000..1a33373
--- /dev/null
+++ b/arch/arm/mach-at91/leds.c
@@ -0,0 +1,99 @@
+/*
+ * LED driver for Atmel AT91-based boards.
+ *
+ *  Copyright (C) SAN People (Pty) Ltd
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <asm/mach-types.h>
+#include <asm/leds.h>
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+
+static inline void at91_led_on(unsigned int led)
+{
+	at91_set_gpio_value(led, 0);
+}
+
+static inline void at91_led_off(unsigned int led)
+{
+	at91_set_gpio_value(led, 1);
+}
+
+static inline void at91_led_toggle(unsigned int led)
+{
+	unsigned long is_off = at91_get_gpio_value(led);
+	if (is_off)
+		at91_led_on(led);
+	else
+		at91_led_off(led);
+}
+
+
+/*
+ * Handle LED events.
+ */
+static void at91_leds_event(led_event_t evt)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	switch(evt) {
+	case led_start:		/* System startup */
+		at91_led_on(at91_leds_cpu);
+		break;
+
+	case led_stop:		/* System stop / suspend */
+		at91_led_off(at91_leds_cpu);
+		break;
+
+#ifdef CONFIG_LEDS_TIMER
+	case led_timer:		/* Every 50 timer ticks */
+		at91_led_toggle(at91_leds_timer);
+		break;
+#endif
+
+#ifdef CONFIG_LEDS_CPU
+	case led_idle_start:	/* Entering idle state */
+		at91_led_off(at91_leds_cpu);
+		break;
+
+	case led_idle_end:	/* Exit idle state */
+		at91_led_on(at91_leds_cpu);
+		break;
+#endif
+
+	default:
+		break;
+	}
+
+	local_irq_restore(flags);
+}
+
+
+static int __init leds_init(void)
+{
+	if (!at91_leds_timer || !at91_leds_cpu)
+		return -ENODEV;
+
+	/* Enable PIO to access the LEDs */
+	at91_set_gpio_output(at91_leds_timer, 1);
+	at91_set_gpio_output(at91_leds_cpu, 1);
+
+	leds_event = at91_leds_event;
+
+	leds_event(led_start);
+	return 0;
+}
+
+__initcall(leds_init);
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
new file mode 100644
index 0000000..e095b1f
--- /dev/null
+++ b/arch/arm/mach-at91/pm.c
@@ -0,0 +1,227 @@
+/*
+ * arch/arm/mach-at91/pm.c
+ * AT91 Power Management
+ *
+ * Copyright (C) 2005 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/pm.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/pm.h>
+#include <linux/interrupt.h>
+#include <linux/sysfs.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/atomic.h>
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91rm9200_mc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/cpu.h>
+
+#include "generic.h"
+
+
+static int at91_pm_valid_state(suspend_state_t state)
+{
+	switch (state) {
+		case PM_SUSPEND_ON:
+		case PM_SUSPEND_STANDBY:
+		case PM_SUSPEND_MEM:
+			return 1;
+
+		default:
+			return 0;
+	}
+}
+
+
+static suspend_state_t target_state;
+
+/*
+ * Called after processes are frozen, but before we shutdown devices.
+ */
+static int at91_pm_prepare(suspend_state_t state)
+{
+	target_state = state;
+	return 0;
+}
+
+/*
+ * Verify that all the clocks are correct before entering
+ * slow-clock mode.
+ */
+static int at91_pm_verify_clocks(void)
+{
+	unsigned long scsr;
+	int i;
+
+	scsr = at91_sys_read(AT91_PMC_SCSR);
+
+	/* USB must not be using PLLB */
+	if (cpu_is_at91rm9200()) {
+		if ((scsr & (AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP)) != 0) {
+			pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
+			return 0;
+		}
+	} else if (cpu_is_at91sam9260()) {
+#warning "Check SAM9260 USB clocks"
+	} else if (cpu_is_at91sam9261()) {
+#warning "Check SAM9261 USB clocks"
+	}
+
+#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
+	/* PCK0..PCK3 must be disabled, or configured to use clk32k */
+	for (i = 0; i < 4; i++) {
+		u32 css;
+
+		if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
+			continue;
+
+		css = at91_sys_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
+		if (css != AT91_PMC_CSS_SLOW) {
+			pr_debug("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
+			return 0;
+		}
+	}
+#endif
+
+	return 1;
+}
+
+/*
+ * Call this from platform driver suspend() to see how deeply to suspend.
+ * For example, some controllers (like OHCI) need one of the PLL clocks
+ * in order to act as a wakeup source, and those are not available when
+ * going into slow clock mode.
+ *
+ * REVISIT: generalize as clk_will_be_available(clk)?  Other platforms have
+ * the very same problem (but not using at91 main_clk), and it'd be better
+ * to add one generic API rather than lots of platform-specific ones.
+ */
+int at91_suspend_entering_slow_clock(void)
+{
+	return (target_state == PM_SUSPEND_MEM);
+}
+EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
+
+
+static void (*slow_clock)(void);
+
+
+static int at91_pm_enter(suspend_state_t state)
+{
+	at91_gpio_suspend();
+	at91_irq_suspend();
+
+	pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
+			/* remember all the always-wake irqs */
+			(at91_sys_read(AT91_PMC_PCSR)
+					| (1 << AT91_ID_FIQ)
+					| (1 << AT91_ID_SYS)
+					| (at91_extern_irq))
+				& at91_sys_read(AT91_AIC_IMR),
+			state);
+
+	switch (state) {
+		/*
+		 * Suspend-to-RAM is like STANDBY plus slow clock mode, so
+		 * drivers must suspend more deeply:  only the master clock
+		 * controller may be using the main oscillator.
+		 */
+		case PM_SUSPEND_MEM:
+			/*
+			 * Ensure that clocks are in a valid state.
+			 */
+			if (!at91_pm_verify_clocks())
+				goto error;
+
+			/*
+			 * Enter slow clock mode by switching over to clk32k and
+			 * turning off the main oscillator; reverse on wakeup.
+			 */
+			if (slow_clock) {
+				slow_clock();
+				break;
+			} else {
+				/* DEVELOPMENT ONLY */
+				pr_info("AT91: PM - no slow clock mode yet ...\n");
+				/* FALLTHROUGH leaving master clock alone */
+			}
+
+		/*
+		 * STANDBY mode has *all* drivers suspended; ignores irqs not
+		 * marked as 'wakeup' event sources; and reduces DRAM power.
+		 * But otherwise it's identical to PM_SUSPEND_ON:  cpu idle, and
+		 * nothing fancy done with main or cpu clocks.
+		 */
+		case PM_SUSPEND_STANDBY:
+			/*
+			 * NOTE: the Wait-for-Interrupt instruction needs to be
+			 * in icache so the SDRAM stays in self-refresh mode until
+			 * the wakeup IRQ occurs.
+			 */
+			asm("b 1f; .align 5; 1:");
+			asm("mcr p15, 0, r0, c7, c10, 4");	/* drain write buffer */
+			at91_sys_write(AT91_SDRAMC_SRR, 1);	/* self-refresh mode */
+			/* fall though to next state */
+
+		case PM_SUSPEND_ON:
+			asm("mcr p15, 0, r0, c7, c0, 4");	/* wait for interrupt */
+			break;
+
+		default:
+			pr_debug("AT91: PM - bogus suspend state %d\n", state);
+			goto error;
+	}
+
+	pr_debug("AT91: PM - wakeup %08x\n",
+			at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));
+
+error:
+	target_state = PM_SUSPEND_ON;
+	at91_irq_resume();
+	at91_gpio_resume();
+	return 0;
+}
+
+
+static struct pm_ops at91_pm_ops ={
+	.pm_disk_mode	= 0,
+	.valid		= at91_pm_valid_state,
+	.prepare	= at91_pm_prepare,
+	.enter		= at91_pm_enter,
+};
+
+static int __init at91_pm_init(void)
+{
+	printk("AT91: Power Management\n");
+
+#ifdef CONFIG_AT91_PM_SLOW_CLOCK
+	/* REVISIT allocations of SRAM should be dynamically managed.
+	 * FIQ handlers and other components will want SRAM/TCM too...
+	 */
+	slow_clock = (void *) (AT91_VA_BASE_SRAM + (3 * SZ_4K));
+	memcpy(slow_clock, at91rm9200_slow_clock, at91rm9200_slow_clock_sz);
+#endif
+
+	/* Disable SDRAM low-power mode.  Cannot be used with self-refresh. */
+	at91_sys_write(AT91_SDRAMC_LPR, 0);
+
+	pm_set_ops(&at91_pm_ops);
+
+	return 0;
+}
+arch_initcall(at91_pm_init);
diff --git a/arch/arm/mach-at91rm9200/Kconfig b/arch/arm/mach-at91rm9200/Kconfig
deleted file mode 100644
index 9f11db8..0000000
--- a/arch/arm/mach-at91rm9200/Kconfig
+++ /dev/null
@@ -1,148 +0,0 @@
-if ARCH_AT91
-
-menu "Atmel AT91 System-on-Chip"
-
-choice
-	prompt "Atmel AT91 Processor"
-
-config ARCH_AT91RM9200
-	bool "AT91RM9200"
-
-config ARCH_AT91SAM9260
-	bool "AT91SAM9260"
-
-config ARCH_AT91SAM9261
-	bool "AT91SAM9261"
-
-endchoice
-
-# ----------------------------------------------------------
-
-if ARCH_AT91RM9200
-
-comment "AT91RM9200 Board Type"
-
-config MACH_ONEARM
-	bool "Ajeco 1ARM Single Board Computer"
-	depends on ARCH_AT91RM9200
-	help
-	  Select this if you are using Ajeco's 1ARM Single Board Computer.
-	  <http://www.ajeco.fi/products.htm>
-
-config ARCH_AT91RM9200DK
-	bool "Atmel AT91RM9200-DK Development board"
-	depends on ARCH_AT91RM9200
-	help
-	  Select this if you are using Atmel's AT91RM9200-DK Development board.
-	  (Discontinued)
-
-config MACH_AT91RM9200EK
-	bool "Atmel AT91RM9200-EK Evaluation Kit"
-	depends on ARCH_AT91RM9200
-	help
-	  Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
-	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
-
-config MACH_CSB337
-	bool "Cogent CSB337"
-	depends on ARCH_AT91RM9200
-	help
-	  Select this if you are using Cogent's CSB337 board.
-	  <http://www.cogcomp.com/csb_csb337.htm>
-
-config MACH_CSB637
-	bool "Cogent CSB637"
-	depends on ARCH_AT91RM9200
-	help
-	  Select this if you are using Cogent's CSB637 board.
-	  <http://www.cogcomp.com/csb_csb637.htm>
-
-config MACH_CARMEVA
-	bool "Conitec ARM&EVA"
-	depends on ARCH_AT91RM9200
-	help
-	  Select this if you are using Conitec's AT91RM9200-MCU-Module.
-	  <http://www.conitec.net/english/linuxboard.htm>
-
-config MACH_ATEB9200
-	bool "Embest ATEB9200"
-	depends on ARCH_AT91RM9200
-	help
-	  Select this if you are using Embest's ATEB9200 board.
-	  <http://www.embedinfo.com/english/product/ATEB9200.asp>
-
-config MACH_KB9200
-	bool "KwikByte KB920x"
-	depends on ARCH_AT91RM9200
-	help
-	  Select this if you are using KwikByte's KB920x board.
-	  <http://kwikbyte.com/KB9202_description_new.htm>
-
-config MACH_KAFA
-	bool "Sperry-Sun KAFA board"
-	depends on ARCH_AT91RM9200
-	help
-	  Select this if you are using Sperry-Sun's KAFA board.
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9260
-
-comment "AT91SAM9260 Board Type"
-
-config MACH_AT91SAM9260EK
-	bool "Atmel AT91SAM9260-EK Evaluation Kit"
-	depends on ARCH_AT91SAM9260
-	help
-	  Select this if you are using Atmel's AT91SAM9260-EK Evaluation Kit.
-	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9261
-
-comment "AT91SAM9261 Board Type"
-
-config MACH_AT91SAM9261EK
-	bool "Atmel AT91SAM9261-EK Evaluation Kit"
-	depends on ARCH_AT91SAM9261
-	help
-	  Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
-	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
-
-endif
-
-# ----------------------------------------------------------
-
-comment "AT91 Board Options"
-
-config MTD_AT91_DATAFLASH_CARD
-	bool "Enable DataFlash Card support"
-	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK)
-	help
-	  Enable support for the DataFlash card.
-
-config MTD_NAND_AT91_BUSWIDTH_16
-	bool "Enable 16-bit data bus interface to NAND flash"
-	depends on (MACH_AT91SAM9261EK || MACH_AT91SAM9260EK)
-	help
-	  On AT91SAM926x boards both types of NAND flash can be present
-	  (8 and 16 bit data bus width).
-
-# ----------------------------------------------------------
-
-comment "AT91 Feature Selections"
-
-config AT91_PROGRAMMABLE_CLOCKS
-	bool "Programmable Clocks"
-	help
-	  Select this if you need to program one or more of the PCK0..PCK3
-	  programmable clock outputs.
-
-endmenu
-
-endif
diff --git a/arch/arm/mach-at91rm9200/Makefile b/arch/arm/mach-at91rm9200/Makefile
deleted file mode 100644
index cf77700..0000000
--- a/arch/arm/mach-at91rm9200/Makefile
+++ /dev/null
@@ -1,49 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-y		:= clock.o irq.o gpio.o
-obj-m		:=
-obj-n		:=
-obj-		:=
-
-obj-$(CONFIG_PM)		+= pm.o
-
-# CPU-specific support
-obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
-
-# AT91RM9200 board-specific support
-obj-$(CONFIG_MACH_ONEARM)	+= board-1arm.o
-obj-$(CONFIG_ARCH_AT91RM9200DK)	+= board-dk.o
-obj-$(CONFIG_MACH_AT91RM9200EK)	+= board-ek.o
-obj-$(CONFIG_MACH_CSB337)	+= board-csb337.o
-obj-$(CONFIG_MACH_CSB637)	+= board-csb637.o
-obj-$(CONFIG_MACH_CARMEVA)	+= board-carmeva.o
-obj-$(CONFIG_MACH_KB9200)	+= board-kb9202.o
-obj-$(CONFIG_MACH_ATEB9200)	+= board-eb9200.o
-obj-$(CONFIG_MACH_KAFA)		+= board-kafa.o
-
-# AT91SAM9260 board-specific support
-obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
-
-# AT91SAM9261 board-specific support
-obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
-
-# LEDs support
-led-$(CONFIG_ARCH_AT91RM9200DK)	+= leds.o
-led-$(CONFIG_MACH_AT91RM9200EK)	+= leds.o
-led-$(CONFIG_MACH_CSB337)	+= leds.o
-led-$(CONFIG_MACH_CSB637)	+= leds.o
-led-$(CONFIG_MACH_KB9200)	+= leds.o
-led-$(CONFIG_MACH_KAFA)		+= leds.o
-obj-$(CONFIG_LEDS) += $(led-y)
-
-# VGA support
-#obj-$(CONFIG_FB_S1D13XXX)	+= ics1523.o
-
-
-ifeq ($(CONFIG_PM_DEBUG),y)
-CFLAGS_pm.o += -DDEBUG
-endif
diff --git a/arch/arm/mach-at91rm9200/Makefile.boot b/arch/arm/mach-at91rm9200/Makefile.boot
deleted file mode 100644
index e667dcc..0000000
--- a/arch/arm/mach-at91rm9200/Makefile.boot
+++ /dev/null
@@ -1,9 +0,0 @@
-# Note: the following conditions must always be true:
-#   ZRELADDR == virt_to_phys(TEXTADDR)
-#   PARAMS_PHYS must be within 4MB of ZRELADDR
-#   INITRD_PHYS must be in RAM
-
-   zreladdr-y	:= 0x20008000
-params_phys-y	:= 0x20000100
-initrd_phys-y	:= 0x20410000
-
diff --git a/arch/arm/mach-at91rm9200/at91rm9200.c b/arch/arm/mach-at91rm9200/at91rm9200.c
deleted file mode 100644
index a92e9a4..0000000
--- a/arch/arm/mach-at91rm9200/at91rm9200.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * arch/arm/mach-at91rm9200/at91rm9200.c
- *
- *  Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/module.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/arch/at91rm9200.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_st.h>
-
-#include "generic.h"
-#include "clock.h"
-
-static struct map_desc at91rm9200_io_desc[] __initdata = {
-	{
-		.virtual	= AT91_VA_BASE_SYS,
-		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= AT91_VA_BASE_EMAC,
-		.pfn		= __phys_to_pfn(AT91RM9200_BASE_EMAC),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE,
-		.pfn		= __phys_to_pfn(AT91RM9200_SRAM_BASE),
-		.length		= AT91RM9200_SRAM_SIZE,
-		.type		= MT_DEVICE,
-	},
-};
-
-/* --------------------------------------------------------------------
- *  Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk udc_clk = {
-	.name		= "udc_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_UDP,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ohci_clk = {
-	.name		= "ohci_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_UHP,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ether_clk = {
-	.name		= "ether_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_EMAC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc_clk = {
-	.name		= "mci_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_MCI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi_clk = {
-	.name		= "twi_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_TWI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
-	.name		= "usart0_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_US0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
-	.name		= "usart1_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_US1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
-	.name		= "usart2_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_US2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart3_clk = {
-	.name		= "usart3_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_US3,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi_clk = {
-	.name		= "spi_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_SPI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioA_clk = {
-	.name		= "pioA_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_PIOA,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioB_clk = {
-	.name		= "pioB_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_PIOB,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioC_clk = {
-	.name		= "pioC_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_PIOC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioD_clk = {
-	.name		= "pioD_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_PIOD,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
-	&pioA_clk,
-	&pioB_clk,
-	&pioC_clk,
-	&pioD_clk,
-	&usart0_clk,
-	&usart1_clk,
-	&usart2_clk,
-	&usart3_clk,
-	&mmc_clk,
-	&udc_clk,
-	&twi_clk,
-	&spi_clk,
-	// ssc 0 .. ssc2
-	// tc0 .. tc5
-	&ohci_clk,
-	&ether_clk,
-	// irq0 .. irq6
-};
-
-/*
- * The four programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
-	.name		= "pck0",
-	.pmc_mask	= AT91_PMC_PCK0,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 0,
-};
-static struct clk pck1 = {
-	.name		= "pck1",
-	.pmc_mask	= AT91_PMC_PCK1,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 1,
-};
-static struct clk pck2 = {
-	.name		= "pck2",
-	.pmc_mask	= AT91_PMC_PCK2,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 2,
-};
-static struct clk pck3 = {
-	.name		= "pck3",
-	.pmc_mask	= AT91_PMC_PCK3,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 3,
-};
-
-static void __init at91rm9200_register_clocks(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
-		clk_register(periph_clocks[i]);
-
-	clk_register(&pck0);
-	clk_register(&pck1);
-	clk_register(&pck2);
-	clk_register(&pck3);
-}
-
-/* --------------------------------------------------------------------
- *  GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at91rm9200_gpio[] = {
-	{
-		.id		= AT91RM9200_ID_PIOA,
-		.offset		= AT91_PIOA,
-		.clock		= &pioA_clk,
-	}, {
-		.id		= AT91RM9200_ID_PIOB,
-		.offset		= AT91_PIOB,
-		.clock		= &pioB_clk,
-	}, {
-		.id		= AT91RM9200_ID_PIOC,
-		.offset		= AT91_PIOC,
-		.clock		= &pioC_clk,
-	}, {
-		.id		= AT91RM9200_ID_PIOD,
-		.offset		= AT91_PIOD,
-		.clock		= &pioD_clk,
-	}
-};
-
-static void at91rm9200_reset(void)
-{
-	/*
-	 * Perform a hardware reset with the use of the Watchdog timer.
-	 */
-	at91_sys_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1);
-	at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
-}
-
-
-/* --------------------------------------------------------------------
- *  AT91RM9200 processor initialization
- * -------------------------------------------------------------------- */
-void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks)
-{
-	/* Map peripherals */
-	iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
-
-	at91_arch_reset = at91rm9200_reset;
-	at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
-			| (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
-			| (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5)
-			| (1 << AT91RM9200_ID_IRQ6);
-
-	/* Init clock subsystem */
-	at91_clock_init(main_clock);
-
-	/* Register the processor-specific clocks */
-	at91rm9200_register_clocks();
-
-	/* Initialize GPIO subsystem */
-	at91_gpio_init(at91rm9200_gpio, banks);
-}
-
-
-/* --------------------------------------------------------------------
- *  Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
-	7,	/* Advanced Interrupt Controller (FIQ) */
-	7,	/* System Peripherals */
-	0,	/* Parallel IO Controller A */
-	0,	/* Parallel IO Controller B */
-	0,	/* Parallel IO Controller C */
-	0,	/* Parallel IO Controller D */
-	6,	/* USART 0 */
-	6,	/* USART 1 */
-	6,	/* USART 2 */
-	6,	/* USART 3 */
-	0,	/* Multimedia Card Interface */
-	4,	/* USB Device Port */
-	0,	/* Two-Wire Interface */
-	6,	/* Serial Peripheral Interface */
-	5,	/* Serial Synchronous Controller 0 */
-	5,	/* Serial Synchronous Controller 1 */
-	5,	/* Serial Synchronous Controller 2 */
-	0,	/* Timer Counter 0 */
-	0,	/* Timer Counter 1 */
-	0,	/* Timer Counter 2 */
-	0,	/* Timer Counter 3 */
-	0,	/* Timer Counter 4 */
-	0,	/* Timer Counter 5 */
-	3,	/* USB Host port */
-	3,	/* Ethernet MAC */
-	0,	/* Advanced Interrupt Controller (IRQ0) */
-	0,	/* Advanced Interrupt Controller (IRQ1) */
-	0,	/* Advanced Interrupt Controller (IRQ2) */
-	0,	/* Advanced Interrupt Controller (IRQ3) */
-	0,	/* Advanced Interrupt Controller (IRQ4) */
-	0,	/* Advanced Interrupt Controller (IRQ5) */
-	0	/* Advanced Interrupt Controller (IRQ6) */
-};
-
-void __init at91rm9200_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-{
-	if (!priority)
-		priority = at91rm9200_default_irq_priority;
-
-	/* Initialize the AIC interrupt controller */
-	at91_aic_init(priority);
-
-	/* Enable GPIO interrupts */
-	at91_gpio_irq_setup();
-}
diff --git a/arch/arm/mach-at91rm9200/at91rm9200_devices.c b/arch/arm/mach-at91rm9200/at91rm9200_devices.c
deleted file mode 100644
index 57fac72..0000000
--- a/arch/arm/mach-at91rm9200/at91rm9200_devices.c
+++ /dev/null
@@ -1,875 +0,0 @@
-/*
- * arch/arm/mach-at91rm9200/at91rm9200_devices.c
- *
- *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
- *  Copyright (C) 2005 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/platform_device.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200.h>
-#include <asm/arch/at91rm9200_mc.h>
-
-#include "generic.h"
-
-#define SZ_512	0x00000200
-#define SZ_256	0x00000100
-#define SZ_16	0x00000010
-
-/* --------------------------------------------------------------------
- *  USB Host
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = 0xffffffffUL;
-static struct at91_usbh_data usbh_data;
-
-static struct resource usbh_resources[] = {
-	[0] = {
-		.start	= AT91RM9200_UHP_BASE,
-		.end	= AT91RM9200_UHP_BASE + SZ_1M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91RM9200_ID_UHP,
-		.end	= AT91RM9200_ID_UHP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91rm9200_usbh_device = {
-	.name		= "at91_ohci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &ohci_dmamask,
-				.coherent_dma_mask	= 0xffffffff,
-				.platform_data		= &usbh_data,
-	},
-	.resource	= usbh_resources,
-	.num_resources	= ARRAY_SIZE(usbh_resources),
-};
-
-void __init at91_add_device_usbh(struct at91_usbh_data *data)
-{
-	if (!data)
-		return;
-
-	usbh_data = *data;
-	platform_device_register(&at91rm9200_usbh_device);
-}
-#else
-void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  USB Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_USB_GADGET_AT91
-static struct at91_udc_data udc_data;
-
-static struct resource udc_resources[] = {
-	[0] = {
-		.start	= AT91RM9200_BASE_UDP,
-		.end	= AT91RM9200_BASE_UDP + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91RM9200_ID_UDP,
-		.end	= AT91RM9200_ID_UDP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91rm9200_udc_device = {
-	.name		= "at91_udc",
-	.id		= -1,
-	.dev		= {
-				.platform_data		= &udc_data,
-	},
-	.resource	= udc_resources,
-	.num_resources	= ARRAY_SIZE(udc_resources),
-};
-
-void __init at91_add_device_udc(struct at91_udc_data *data)
-{
-	if (!data)
-		return;
-
-	if (data->vbus_pin) {
-		at91_set_gpio_input(data->vbus_pin, 0);
-		at91_set_deglitch(data->vbus_pin, 1);
-	}
-	if (data->pullup_pin)
-		at91_set_gpio_output(data->pullup_pin, 0);
-
-	udc_data = *data;
-	platform_device_register(&at91rm9200_udc_device);
-}
-#else
-void __init at91_add_device_udc(struct at91_udc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Ethernet
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE)
-static u64 eth_dmamask = 0xffffffffUL;
-static struct at91_eth_data eth_data;
-
-static struct resource eth_resources[] = {
-	[0] = {
-		.start	= AT91_VA_BASE_EMAC,
-		.end	= AT91_VA_BASE_EMAC + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91RM9200_ID_EMAC,
-		.end	= AT91RM9200_ID_EMAC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91rm9200_eth_device = {
-	.name		= "at91_ether",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &eth_dmamask,
-				.coherent_dma_mask	= 0xffffffff,
-				.platform_data		= &eth_data,
-	},
-	.resource	= eth_resources,
-	.num_resources	= ARRAY_SIZE(eth_resources),
-};
-
-void __init at91_add_device_eth(struct at91_eth_data *data)
-{
-	if (!data)
-		return;
-
-	if (data->phy_irq_pin) {
-		at91_set_gpio_input(data->phy_irq_pin, 0);
-		at91_set_deglitch(data->phy_irq_pin, 1);
-	}
-
-	/* Pins used for MII and RMII */
-	at91_set_A_periph(AT91_PIN_PA16, 0);	/* EMDIO */
-	at91_set_A_periph(AT91_PIN_PA15, 0);	/* EMDC */
-	at91_set_A_periph(AT91_PIN_PA14, 0);	/* ERXER */
-	at91_set_A_periph(AT91_PIN_PA13, 0);	/* ERX1 */
-	at91_set_A_periph(AT91_PIN_PA12, 0);	/* ERX0 */
-	at91_set_A_periph(AT91_PIN_PA11, 0);	/* ECRS_ECRSDV */
-	at91_set_A_periph(AT91_PIN_PA10, 0);	/* ETX1 */
-	at91_set_A_periph(AT91_PIN_PA9, 0);	/* ETX0 */
-	at91_set_A_periph(AT91_PIN_PA8, 0);	/* ETXEN */
-	at91_set_A_periph(AT91_PIN_PA7, 0);	/* ETXCK_EREFCK */
-
-	if (!data->is_rmii) {
-		at91_set_B_periph(AT91_PIN_PB19, 0);	/* ERXCK */
-		at91_set_B_periph(AT91_PIN_PB18, 0);	/* ECOL */
-		at91_set_B_periph(AT91_PIN_PB17, 0);	/* ERXDV */
-		at91_set_B_periph(AT91_PIN_PB16, 0);	/* ERX3 */
-		at91_set_B_periph(AT91_PIN_PB15, 0);	/* ERX2 */
-		at91_set_B_periph(AT91_PIN_PB14, 0);	/* ETXER */
-		at91_set_B_periph(AT91_PIN_PB13, 0);	/* ETX3 */
-		at91_set_B_periph(AT91_PIN_PB12, 0);	/* ETX2 */
-	}
-
-	eth_data = *data;
-	platform_device_register(&at91rm9200_eth_device);
-}
-#else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Compact Flash / PCMCIA
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
-static struct at91_cf_data cf_data;
-
-#define CF_BASE		AT91_CHIPSELECT_4
-
-static struct resource cf_resources[] = {
-	[0] = {
-		.start	= CF_BASE,
-		/* ties up CS4, CS5 and CS6 */
-		.end	= CF_BASE + (0x30000000 - 1),
-		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
-	},
-};
-
-static struct platform_device at91rm9200_cf_device = {
-	.name		= "at91_cf",
-	.id		= -1,
-	.dev		= {
-				.platform_data		= &cf_data,
-	},
-	.resource	= cf_resources,
-	.num_resources	= ARRAY_SIZE(cf_resources),
-};
-
-void __init at91_add_device_cf(struct at91_cf_data *data)
-{
-	unsigned int csa;
-
-	if (!data)
-		return;
-
-	data->chipselect = 4;		/* can only use EBI ChipSelect 4 */
-
-	/* CF takes over CS4, CS5, CS6 */
-	csa = at91_sys_read(AT91_EBI_CSA);
-	at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS4A_SMC_COMPACTFLASH);
-
-	/*
-	 * Static memory controller timing adjustments.
-	 * REVISIT:  these timings are in terms of MCK cycles, so
-	 * when MCK changes (cpufreq etc) so must these values...
-	 */
-	at91_sys_write(AT91_SMC_CSR(4),
-				  AT91_SMC_ACSS_STD
-				| AT91_SMC_DBW_16
-				| AT91_SMC_BAT
-				| AT91_SMC_WSEN
-				| AT91_SMC_NWS_(32)	/* wait states */
-				| AT91_SMC_RWSETUP_(6)	/* setup time */
-				| AT91_SMC_RWHOLD_(4)	/* hold time */
-	);
-
-	/* input/irq */
-	if (data->irq_pin) {
-		at91_set_gpio_input(data->irq_pin, 1);
-		at91_set_deglitch(data->irq_pin, 1);
-	}
-	at91_set_gpio_input(data->det_pin, 1);
-	at91_set_deglitch(data->det_pin, 1);
-
-	/* outputs, initially off */
-	if (data->vcc_pin)
-		at91_set_gpio_output(data->vcc_pin, 0);
-	at91_set_gpio_output(data->rst_pin, 0);
-
-	/* force poweron defaults for these pins ... */
-	at91_set_A_periph(AT91_PIN_PC9, 0);	/* A25/CFRNW */
-	at91_set_A_periph(AT91_PIN_PC10, 0);	/* NCS4/CFCS */
-	at91_set_A_periph(AT91_PIN_PC11, 0);	/* NCS5/CFCE1 */
-	at91_set_A_periph(AT91_PIN_PC12, 0);	/* NCS6/CFCE2 */
-
-	/* nWAIT is _not_ a default setting */
-	at91_set_A_periph(AT91_PIN_PC6, 1);	/* nWAIT */
-
-	cf_data = *data;
-	platform_device_register(&at91rm9200_cf_device);
-}
-#else
-void __init at91_add_device_cf(struct at91_cf_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = 0xffffffffUL;
-static struct at91_mmc_data mmc_data;
-
-static struct resource mmc_resources[] = {
-	[0] = {
-		.start	= AT91RM9200_BASE_MCI,
-		.end	= AT91RM9200_BASE_MCI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91RM9200_ID_MCI,
-		.end	= AT91RM9200_ID_MCI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91rm9200_mmc_device = {
-	.name		= "at91_mci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &mmc_dmamask,
-				.coherent_dma_mask	= 0xffffffff,
-				.platform_data		= &mmc_data,
-	},
-	.resource	= mmc_resources,
-	.num_resources	= ARRAY_SIZE(mmc_resources),
-};
-
-void __init at91_add_device_mmc(struct at91_mmc_data *data)
-{
-	if (!data)
-		return;
-
-	/* input/irq */
-	if (data->det_pin) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (data->wp_pin)
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (data->vcc_pin)
-		at91_set_gpio_output(data->vcc_pin, 0);
-
-	/* CLK */
-	at91_set_A_periph(AT91_PIN_PA27, 0);
-
-	if (data->slot_b) {
-		/* CMD */
-		at91_set_B_periph(AT91_PIN_PA8, 1);
-
-		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_B_periph(AT91_PIN_PA9, 1);
-		if (data->wire4) {
-			at91_set_B_periph(AT91_PIN_PA10, 1);
-			at91_set_B_periph(AT91_PIN_PA11, 1);
-			at91_set_B_periph(AT91_PIN_PA12, 1);
-		}
-	} else {
-		/* CMD */
-		at91_set_A_periph(AT91_PIN_PA28, 1);
-
-		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_A_periph(AT91_PIN_PA29, 1);
-		if (data->wire4) {
-			at91_set_B_periph(AT91_PIN_PB3, 1);
-			at91_set_B_periph(AT91_PIN_PB4, 1);
-			at91_set_B_periph(AT91_PIN_PB5, 1);
-		}
-	}
-
-	mmc_data = *data;
-	platform_device_register(&at91rm9200_mmc_device);
-}
-#else
-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
-
-#define NAND_BASE	AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
-	{
-		.start	= NAND_BASE,
-		.end	= NAND_BASE + SZ_8M - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at91rm9200_nand_device = {
-	.name		= "at91_nand",
-	.id		= -1,
-	.dev		= {
-				.platform_data	= &nand_data,
-	},
-	.resource	= nand_resources,
-	.num_resources	= ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct at91_nand_data *data)
-{
-	unsigned int csa;
-
-	if (!data)
-		return;
-
-	/* enable the address range of CS3 */
-	csa = at91_sys_read(AT91_EBI_CSA);
-	at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS3A_SMC_SMARTMEDIA);
-
-	/* set the bus interface characteristics */
-	at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_ACSS_STD | AT91_SMC_DBW_8 | AT91_SMC_WSEN
-		| AT91_SMC_NWS_(5)
-		| AT91_SMC_TDF_(1)
-		| AT91_SMC_RWSETUP_(0)	/* tDS Data Set up Time 30 - ns */
-		| AT91_SMC_RWHOLD_(1)	/* tDH Data Hold Time 20 - ns */
-	);
-
-	/* enable pin */
-	if (data->enable_pin)
-		at91_set_gpio_output(data->enable_pin, 1);
-
-	/* ready/busy pin */
-	if (data->rdy_pin)
-		at91_set_gpio_input(data->rdy_pin, 1);
-
-	/* card detect pin */
-	if (data->det_pin)
-		at91_set_gpio_input(data->det_pin, 1);
-
-	at91_set_A_periph(AT91_PIN_PC1, 0);		/* SMOE */
-	at91_set_A_periph(AT91_PIN_PC3, 0);		/* SMWE */
-
-	nand_data = *data;
-	platform_device_register(&at91rm9200_nand_device);
-}
-#else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  TWI (i2c)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
-	[0] = {
-		.start	= AT91RM9200_BASE_TWI,
-		.end	= AT91RM9200_BASE_TWI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91RM9200_ID_TWI,
-		.end	= AT91RM9200_ID_TWI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91rm9200_twi_device = {
-	.name		= "at91_i2c",
-	.id		= -1,
-	.resource	= twi_resources,
-	.num_resources	= ARRAY_SIZE(twi_resources),
-};
-
-void __init at91_add_device_i2c(void)
-{
-	/* pins used for TWI interface */
-	at91_set_A_periph(AT91_PIN_PA25, 0);		/* TWD */
-	at91_set_multi_drive(AT91_PIN_PA25, 1);
-
-	at91_set_A_periph(AT91_PIN_PA26, 0);		/* TWCK */
-	at91_set_multi_drive(AT91_PIN_PA26, 1);
-
-	platform_device_register(&at91rm9200_twi_device);
-}
-#else
-void __init at91_add_device_i2c(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) || defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE)
-static u64 spi_dmamask = 0xffffffffUL;
-
-static struct resource spi_resources[] = {
-	[0] = {
-		.start	= AT91RM9200_BASE_SPI,
-		.end	= AT91RM9200_BASE_SPI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91RM9200_ID_SPI,
-		.end	= AT91RM9200_ID_SPI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91rm9200_spi_device = {
-	.name		= "at91_spi",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &spi_dmamask,
-				.coherent_dma_mask	= 0xffffffff,
-	},
-	.resource	= spi_resources,
-	.num_resources	= ARRAY_SIZE(spi_resources),
-};
-
-static const unsigned spi_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
-	int i;
-	unsigned long cs_pin;
-
-	at91_set_A_periph(AT91_PIN_PA0, 0);	/* MISO */
-	at91_set_A_periph(AT91_PIN_PA1, 0);	/* MOSI */
-	at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPCK */
-
-	/* Enable SPI chip-selects */
-	for (i = 0; i < nr_devices; i++) {
-		if (devices[i].controller_data)
-			cs_pin = (unsigned long) devices[i].controller_data;
-		else
-			cs_pin = spi_standard_cs[devices[i].chip_select];
-
-#ifdef CONFIG_SPI_AT91_MANUAL_CS
-		at91_set_gpio_output(cs_pin, 1);
-#else
-		at91_set_A_periph(cs_pin, 0);
-#endif
-
-		/* pass chip-select pin to driver */
-		devices[i].controller_data = (void *) cs_pin;
-	}
-
-	spi_register_board_info(devices, nr_devices);
-	at91_clock_associate("spi_clk", &at91rm9200_spi_device.dev, "spi");
-	platform_device_register(&at91rm9200_spi_device);
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  RTC
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
-static struct platform_device at91rm9200_rtc_device = {
-	.name		= "at91_rtc",
-	.id		= -1,
-	.num_resources	= 0,
-};
-
-static void __init at91_add_device_rtc(void)
-{
-	platform_device_register(&at91rm9200_rtc_device);
-}
-#else
-static void __init at91_add_device_rtc(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Watchdog
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91RM9200_WATCHDOG) || defined(CONFIG_AT91RM9200_WATCHDOG_MODULE)
-static struct platform_device at91rm9200_wdt_device = {
-	.name		= "at91_wdt",
-	.id		= -1,
-	.num_resources	= 0,
-};
-
-static void __init at91_add_device_watchdog(void)
-{
-	platform_device_register(&at91rm9200_wdt_device);
-}
-#else
-static void __init at91_add_device_watchdog(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  LEDs
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_LEDS)
-u8 at91_leds_cpu;
-u8 at91_leds_timer;
-
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
-{
-	at91_leds_cpu	= cpu_led;
-	at91_leds_timer	= timer_led;
-}
-#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  UART
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
-	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91_ID_SYS,
-		.end	= AT91_ID_SYS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data dbgu_data = {
-	.use_dma_tx	= 0,
-	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
-};
-
-static struct platform_device at91rm9200_dbgu_device = {
-	.name		= "atmel_usart",
-	.id		= 0,
-	.dev		= {
-				.platform_data	= &dbgu_data,
-				.coherent_dma_mask = 0xffffffff,
-	},
-	.resource	= dbgu_resources,
-	.num_resources	= ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
-	at91_set_A_periph(AT91_PIN_PA30, 0);		/* DRXD */
-	at91_set_A_periph(AT91_PIN_PA31, 1);		/* DTXD */
-}
-
-static struct resource uart0_resources[] = {
-	[0] = {
-		.start	= AT91RM9200_BASE_US0,
-		.end	= AT91RM9200_BASE_US0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91RM9200_ID_US0,
-		.end	= AT91RM9200_ID_US0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart0_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static struct platform_device at91rm9200_uart0_device = {
-	.name		= "atmel_usart",
-	.id		= 1,
-	.dev		= {
-				.platform_data	= &uart0_data,
-				.coherent_dma_mask = 0xffffffff,
-	},
-	.resource	= uart0_resources,
-	.num_resources	= ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(void)
-{
-	at91_set_A_periph(AT91_PIN_PA17, 1);		/* TXD0 */
-	at91_set_A_periph(AT91_PIN_PA18, 0);		/* RXD0 */
-	at91_set_A_periph(AT91_PIN_PA20, 0);		/* CTS0 */
-
-	/*
-	 * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21.
-	 *  We need to drive the pin manually.  Default is off (RTS is active low).
-	 */
-	at91_set_gpio_output(AT91_PIN_PA21, 1);
-}
-
-static struct resource uart1_resources[] = {
-	[0] = {
-		.start	= AT91RM9200_BASE_US1,
-		.end	= AT91RM9200_BASE_US1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91RM9200_ID_US1,
-		.end	= AT91RM9200_ID_US1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart1_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static struct platform_device at91rm9200_uart1_device = {
-	.name		= "atmel_usart",
-	.id		= 2,
-	.dev		= {
-				.platform_data	= &uart1_data,
-				.coherent_dma_mask = 0xffffffff,
-	},
-	.resource	= uart1_resources,
-	.num_resources	= ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(void)
-{
-	at91_set_A_periph(AT91_PIN_PB18, 0);		/* RI1 */
-	at91_set_A_periph(AT91_PIN_PB19, 0);		/* DTR1 */
-	at91_set_A_periph(AT91_PIN_PB20, 1);		/* TXD1 */
-	at91_set_A_periph(AT91_PIN_PB21, 0);		/* RXD1 */
-	at91_set_A_periph(AT91_PIN_PB23, 0);		/* DCD1 */
-	at91_set_A_periph(AT91_PIN_PB24, 0);		/* CTS1 */
-	at91_set_A_periph(AT91_PIN_PB25, 0);		/* DSR1 */
-	at91_set_A_periph(AT91_PIN_PB26, 0);		/* RTS1 */
-}
-
-static struct resource uart2_resources[] = {
-	[0] = {
-		.start	= AT91RM9200_BASE_US2,
-		.end	= AT91RM9200_BASE_US2 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91RM9200_ID_US2,
-		.end	= AT91RM9200_ID_US2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart2_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static struct platform_device at91rm9200_uart2_device = {
-	.name		= "atmel_usart",
-	.id		= 3,
-	.dev		= {
-				.platform_data	= &uart2_data,
-				.coherent_dma_mask = 0xffffffff,
-	},
-	.resource	= uart2_resources,
-	.num_resources	= ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(void)
-{
-	at91_set_A_periph(AT91_PIN_PA22, 0);		/* RXD2 */
-	at91_set_A_periph(AT91_PIN_PA23, 1);		/* TXD2 */
-}
-
-static struct resource uart3_resources[] = {
-	[0] = {
-		.start	= AT91RM9200_BASE_US3,
-		.end	= AT91RM9200_BASE_US3 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91RM9200_ID_US3,
-		.end	= AT91RM9200_ID_US3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart3_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static struct platform_device at91rm9200_uart3_device = {
-	.name		= "atmel_usart",
-	.id		= 4,
-	.dev		= {
-				.platform_data	= &uart3_data,
-				.coherent_dma_mask = 0xffffffff,
-	},
-	.resource	= uart3_resources,
-	.num_resources	= ARRAY_SIZE(uart3_resources),
-};
-
-static inline void configure_usart3_pins(void)
-{
-	at91_set_B_periph(AT91_PIN_PA5, 1);		/* TXD3 */
-	at91_set_B_periph(AT91_PIN_PA6, 0);		/* RXD3 */
-}
-
-struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-struct platform_device *atmel_default_console_device;	/* the serial console device */
-
-void __init at91_init_serial(struct at91_uart_config *config)
-{
-	int i;
-
-	/* Fill in list of supported UARTs */
-	for (i = 0; i < config->nr_tty; i++) {
-		switch (config->tty_map[i]) {
-			case 0:
-				configure_usart0_pins();
-				at91_uarts[i] = &at91rm9200_uart0_device;
-				at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart");
-				break;
-			case 1:
-				configure_usart1_pins();
-				at91_uarts[i] = &at91rm9200_uart1_device;
-				at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart");
-				break;
-			case 2:
-				configure_usart2_pins();
-				at91_uarts[i] = &at91rm9200_uart2_device;
-				at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart");
-				break;
-			case 3:
-				configure_usart3_pins();
-				at91_uarts[i] = &at91rm9200_uart3_device;
-				at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart");
-				break;
-			case 4:
-				configure_dbgu_pins();
-				at91_uarts[i] = &at91rm9200_dbgu_device;
-				at91_clock_associate("mck", &at91rm9200_dbgu_device.dev, "usart");
-				break;
-			default:
-				continue;
-		}
-		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
-	}
-
-	/* Set serial console device */
-	if (config->console_tty < ATMEL_MAX_UART)
-		atmel_default_console_device = at91_uarts[config->console_tty];
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-
-void __init at91_add_device_serial(void)
-{
-	int i;
-
-	for (i = 0; i < ATMEL_MAX_UART; i++) {
-		if (at91_uarts[i])
-			platform_device_register(at91_uarts[i]);
-	}
-}
-#else
-void __init at91_init_serial(struct at91_uart_config *config) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-
-/* -------------------------------------------------------------------- */
-
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
-	at91_add_device_rtc();
-	at91_add_device_watchdog();
-	return 0;
-}
-
-arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91rm9200/at91rm9200_time.c b/arch/arm/mach-at91rm9200/at91rm9200_time.c
deleted file mode 100644
index b999e19..0000000
--- a/arch/arm/mach-at91rm9200/at91rm9200_time.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * linux/arch/arm/mach-at91rm9200/at91rm9200_time.c
- *
- *  Copyright (C) 2003 SAN People
- *  Copyright (C) 2003 ATMEL
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/time.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/mach/time.h>
-
-#include <asm/arch/at91_st.h>
-
-static unsigned long last_crtr;
-
-/*
- * The ST_CRTR is updated asynchronously to the master clock.  It is therefore
- *  necessary to read it twice (with the same value) to ensure accuracy.
- */
-static inline unsigned long read_CRTR(void) {
-	unsigned long x1, x2;
-
-	do {
-		x1 = at91_sys_read(AT91_ST_CRTR);
-		x2 = at91_sys_read(AT91_ST_CRTR);
-	} while (x1 != x2);
-
-	return x1;
-}
-
-/*
- * Returns number of microseconds since last timer interrupt.  Note that interrupts
- * will have been disabled by do_gettimeofday()
- *  'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
- *  'tick' is usecs per jiffy (linux/timex.h).
- */
-static unsigned long at91rm9200_gettimeoffset(void)
-{
-	unsigned long elapsed;
-
-	elapsed = (read_CRTR() - last_crtr) & AT91_ST_ALMV;
-
-	return (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH;
-}
-
-/*
- * IRQ handler for the timer.
- */
-static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
-{
-	if (at91_sys_read(AT91_ST_SR) & AT91_ST_PITS) {	/* This is a shared interrupt */
-		write_seqlock(&xtime_lock);
-
-		while (((read_CRTR() - last_crtr) & AT91_ST_ALMV) >= LATCH) {
-			timer_tick();
-			last_crtr = (last_crtr + LATCH) & AT91_ST_ALMV;
-		}
-
-		write_sequnlock(&xtime_lock);
-
-		return IRQ_HANDLED;
-	}
-	else
-		return IRQ_NONE;		/* not handled */
-}
-
-static struct irqaction at91rm9200_timer_irq = {
-	.name		= "at91_tick",
-	.flags		= IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER,
-	.handler	= at91rm9200_timer_interrupt
-};
-
-void at91rm9200_timer_reset(void)
-{
-	last_crtr = 0;
-
-	/* Real time counter incremented every 30.51758 microseconds */
-	at91_sys_write(AT91_ST_RTMR, 1);
-
-	/* Set Period Interval timer */
-	at91_sys_write(AT91_ST_PIMR, LATCH);
-
-	/* Clear any pending interrupts */
-	(void) at91_sys_read(AT91_ST_SR);
-
-	/* Enable Period Interval Timer interrupt */
-	at91_sys_write(AT91_ST_IER, AT91_ST_PITS);
-}
-
-/*
- * Set up timer interrupt.
- */
-void __init at91rm9200_timer_init(void)
-{
-	/* Disable all timer interrupts */
-	at91_sys_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS);
-	(void) at91_sys_read(AT91_ST_SR);	/* Clear any pending interrupts */
-
-	/* Make IRQs happen for the system timer */
-	setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq);
-
-	/* Change the kernel's 'tick' value to 10009 usec. (the default is 10000) */
-	tick_usec = (LATCH * 1000000) / CLOCK_TICK_RATE;
-
-	/* Initialize and enable the timer interrupt */
-	at91rm9200_timer_reset();
-}
-
-#ifdef CONFIG_PM
-static void at91rm9200_timer_suspend(void)
-{
-	/* disable Period Interval Timer interrupt */
-	at91_sys_write(AT91_ST_IDR, AT91_ST_PITS);
-}
-#else
-#define at91rm9200_timer_suspend	NULL
-#endif
-
-struct sys_timer at91rm9200_timer = {
-	.init		= at91rm9200_timer_init,
-	.offset		= at91rm9200_gettimeoffset,
-	.suspend	= at91rm9200_timer_suspend,
-	.resume		= at91rm9200_timer_reset,
-};
-
diff --git a/arch/arm/mach-at91rm9200/at91sam9260.c b/arch/arm/mach-at91rm9200/at91sam9260.c
deleted file mode 100644
index b14871a..0000000
--- a/arch/arm/mach-at91rm9200/at91sam9260.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * arch/arm/mach-at91rm9200/at91sam9260.c
- *
- *  Copyright (C) 2006 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/module.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/arch/at91sam9260.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-
-#include "generic.h"
-#include "clock.h"
-
-static struct map_desc at91sam9260_io_desc[] __initdata = {
-	{
-		.virtual	= AT91_VA_BASE_SYS,
-		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE,
-		.pfn		= __phys_to_pfn(AT91SAM9260_SRAM0_BASE),
-		.length		= AT91SAM9260_SRAM0_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE - AT91SAM9260_SRAM1_SIZE,
-		.pfn		= __phys_to_pfn(AT91SAM9260_SRAM1_BASE),
-		.length		= AT91SAM9260_SRAM1_SIZE,
-		.type		= MT_DEVICE,
-	},
-};
-
-/* --------------------------------------------------------------------
- *  Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioA_clk = {
-	.name		= "pioA_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_PIOA,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioB_clk = {
-	.name		= "pioB_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_PIOB,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioC_clk = {
-	.name		= "pioC_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_PIOC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk adc_clk = {
-	.name		= "adc_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_ADC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
-	.name		= "usart0_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_US0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
-	.name		= "usart1_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_US1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
-	.name		= "usart2_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_US2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc_clk = {
-	.name		= "mci_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_MCI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk udc_clk = {
-	.name		= "udc_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_UDP,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi_clk = {
-	.name		= "twi_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_TWI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
-	.name		= "spi0_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_SPI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
-	.name		= "spi1_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_SPI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ohci_clk = {
-	.name		= "ohci_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_UHP,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ether_clk = {
-	.name		= "ether_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_EMAC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk isi_clk = {
-	.name		= "isi_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_ISI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart3_clk = {
-	.name		= "usart3_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_US3,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart4_clk = {
-	.name		= "usart4_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_US4,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart5_clk = {
-	.name		= "usart5_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_US5,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
-	&pioA_clk,
-	&pioB_clk,
-	&pioC_clk,
-	&adc_clk,
-	&usart0_clk,
-	&usart1_clk,
-	&usart2_clk,
-	&mmc_clk,
-	&udc_clk,
-	&twi_clk,
-	&spi0_clk,
-	&spi1_clk,
-	// ssc
-	// tc0 .. tc2
-	&ohci_clk,
-	&ether_clk,
-	&isi_clk,
-	&usart3_clk,
-	&usart4_clk,
-	&usart5_clk,
-	// tc3 .. tc5
-	// irq0 .. irq2
-};
-
-/*
- * The two programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
-	.name		= "pck0",
-	.pmc_mask	= AT91_PMC_PCK0,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 0,
-};
-static struct clk pck1 = {
-	.name		= "pck1",
-	.pmc_mask	= AT91_PMC_PCK1,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 1,
-};
-
-static void __init at91sam9260_register_clocks(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
-		clk_register(periph_clocks[i]);
-
-	clk_register(&pck0);
-	clk_register(&pck1);
-}
-
-/* --------------------------------------------------------------------
- *  GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at91sam9260_gpio[] = {
-	{
-		.id		= AT91SAM9260_ID_PIOA,
-		.offset		= AT91_PIOA,
-		.clock		= &pioA_clk,
-	}, {
-		.id		= AT91SAM9260_ID_PIOB,
-		.offset		= AT91_PIOB,
-		.clock		= &pioB_clk,
-	}, {
-		.id		= AT91SAM9260_ID_PIOC,
-		.offset		= AT91_PIOC,
-		.clock		= &pioC_clk,
-	}
-};
-
-static void at91sam9260_reset(void)
-{
-	at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
-}
-
-
-/* --------------------------------------------------------------------
- *  AT91SAM9260 processor initialization
- * -------------------------------------------------------------------- */
-
-void __init at91sam9260_initialize(unsigned long main_clock)
-{
-	/* Map peripherals */
-	iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc));
-
-	at91_arch_reset = at91sam9260_reset;
-	at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
-			| (1 << AT91SAM9260_ID_IRQ2);
-
-	/* Init clock subsystem */
-	at91_clock_init(main_clock);
-
-	/* Register the processor-specific clocks */
-	at91sam9260_register_clocks();
-
-	/* Register GPIO subsystem */
-	at91_gpio_init(at91sam9260_gpio, 3);
-}
-
-/* --------------------------------------------------------------------
- *  Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
-	7,	/* Advanced Interrupt Controller */
-	7,	/* System Peripherals */
-	0,	/* Parallel IO Controller A */
-	0,	/* Parallel IO Controller B */
-	0,	/* Parallel IO Controller C */
-	0,	/* Analog-to-Digital Converter */
-	6,	/* USART 0 */
-	6,	/* USART 1 */
-	6,	/* USART 2 */
-	0,	/* Multimedia Card Interface */
-	4,	/* USB Device Port */
-	0,	/* Two-Wire Interface */
-	6,	/* Serial Peripheral Interface 0 */
-	6,	/* Serial Peripheral Interface 1 */
-	5,	/* Serial Synchronous Controller */
-	0,
-	0,
-	0,	/* Timer Counter 0 */
-	0,	/* Timer Counter 1 */
-	0,	/* Timer Counter 2 */
-	3,	/* USB Host port */
-	3,	/* Ethernet */
-	0,	/* Image Sensor Interface */
-	6,	/* USART 3 */
-	6,	/* USART 4 */
-	6,	/* USART 5 */
-	0,	/* Timer Counter 3 */
-	0,	/* Timer Counter 4 */
-	0,	/* Timer Counter 5 */
-	0,	/* Advanced Interrupt Controller */
-	0,	/* Advanced Interrupt Controller */
-	0,	/* Advanced Interrupt Controller */
-};
-
-void __init at91sam9260_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-{
-	if (!priority)
-		priority = at91sam9260_default_irq_priority;
-
-	/* Initialize the AIC interrupt controller */
-	at91_aic_init(priority);
-
-	/* Enable GPIO interrupts */
-	at91_gpio_irq_setup();
-}
diff --git a/arch/arm/mach-at91rm9200/at91sam9260_devices.c b/arch/arm/mach-at91rm9200/at91sam9260_devices.c
deleted file mode 100644
index f338f78..0000000
--- a/arch/arm/mach-at91rm9200/at91sam9260_devices.c
+++ /dev/null
@@ -1,867 +0,0 @@
-/*
- * arch/arm/mach-at91rm9200/at91sam9260_devices.c
- *
- *  Copyright (C) 2006 Atmel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/platform_device.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9260.h>
-#include <asm/arch/at91sam926x_mc.h>
-#include <asm/arch/at91sam9260_matrix.h>
-
-#include "generic.h"
-
-#define SZ_512	0x00000200
-#define SZ_256	0x00000100
-#define SZ_16	0x00000010
-
-/* --------------------------------------------------------------------
- *  USB Host
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = 0xffffffffUL;
-static struct at91_usbh_data usbh_data;
-
-static struct resource usbh_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_UHP_BASE,
-		.end	= AT91SAM9260_UHP_BASE + SZ_1M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_UHP,
-		.end	= AT91SAM9260_ID_UHP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91_usbh_device = {
-	.name		= "at91_ohci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &ohci_dmamask,
-				.coherent_dma_mask	= 0xffffffff,
-				.platform_data		= &usbh_data,
-	},
-	.resource	= usbh_resources,
-	.num_resources	= ARRAY_SIZE(usbh_resources),
-};
-
-void __init at91_add_device_usbh(struct at91_usbh_data *data)
-{
-	if (!data)
-		return;
-
-	usbh_data = *data;
-	platform_device_register(&at91_usbh_device);
-}
-#else
-void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  USB Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_USB_GADGET_AT91
-static struct at91_udc_data udc_data;
-
-static struct resource udc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_UDP,
-		.end	= AT91SAM9260_BASE_UDP + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_UDP,
-		.end	= AT91SAM9260_ID_UDP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91_udc_device = {
-	.name		= "at91_udc",
-	.id		= -1,
-	.dev		= {
-				.platform_data		= &udc_data,
-	},
-	.resource	= udc_resources,
-	.num_resources	= ARRAY_SIZE(udc_resources),
-};
-
-void __init at91_add_device_udc(struct at91_udc_data *data)
-{
-	if (!data)
-		return;
-
-	if (data->vbus_pin) {
-		at91_set_gpio_input(data->vbus_pin, 0);
-		at91_set_deglitch(data->vbus_pin, 1);
-	}
-
-	/* Pullup pin is handled internally by USB device peripheral */
-
-	udc_data = *data;
-	platform_device_register(&at91_udc_device);
-}
-#else
-void __init at91_add_device_udc(struct at91_udc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Ethernet
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-static u64 eth_dmamask = 0xffffffffUL;
-static struct at91_eth_data eth_data;
-
-static struct resource eth_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_EMAC,
-		.end	= AT91SAM9260_BASE_EMAC + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_EMAC,
-		.end	= AT91SAM9260_ID_EMAC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9260_eth_device = {
-	.name		= "macb",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &eth_dmamask,
-				.coherent_dma_mask	= 0xffffffff,
-				.platform_data		= &eth_data,
-	},
-	.resource	= eth_resources,
-	.num_resources	= ARRAY_SIZE(eth_resources),
-};
-
-void __init at91_add_device_eth(struct at91_eth_data *data)
-{
-	if (!data)
-		return;
-
-	if (data->phy_irq_pin) {
-		at91_set_gpio_input(data->phy_irq_pin, 0);
-		at91_set_deglitch(data->phy_irq_pin, 1);
-	}
-
-	/* Pins used for MII and RMII */
-	at91_set_A_periph(AT91_PIN_PA19, 0);	/* ETXCK_EREFCK */
-	at91_set_A_periph(AT91_PIN_PA17, 0);	/* ERXDV */
-	at91_set_A_periph(AT91_PIN_PA14, 0);	/* ERX0 */
-	at91_set_A_periph(AT91_PIN_PA15, 0);	/* ERX1 */
-	at91_set_A_periph(AT91_PIN_PA18, 0);	/* ERXER */
-	at91_set_A_periph(AT91_PIN_PA16, 0);	/* ETXEN */
-	at91_set_A_periph(AT91_PIN_PA12, 0);	/* ETX0 */
-	at91_set_A_periph(AT91_PIN_PA13, 0);	/* ETX1 */
-	at91_set_A_periph(AT91_PIN_PA21, 0);	/* EMDIO */
-	at91_set_A_periph(AT91_PIN_PA20, 0);	/* EMDC */
-
-	if (!data->is_rmii) {
-		at91_set_B_periph(AT91_PIN_PA28, 0);	/* ECRS */
-		at91_set_B_periph(AT91_PIN_PA29, 0);	/* ECOL */
-		at91_set_B_periph(AT91_PIN_PA25, 0);	/* ERX2 */
-		at91_set_B_periph(AT91_PIN_PA26, 0);	/* ERX3 */
-		at91_set_B_periph(AT91_PIN_PA27, 0);	/* ERXCK */
-		at91_set_B_periph(AT91_PIN_PA23, 0);	/* ETX2 */
-		at91_set_B_periph(AT91_PIN_PA24, 0);	/* ETX3 */
-		at91_set_B_periph(AT91_PIN_PA22, 0);	/* ETXER */
-	}
-
-	eth_data = *data;
-	platform_device_register(&at91sam9260_eth_device);
-}
-#else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = 0xffffffffUL;
-static struct at91_mmc_data mmc_data;
-
-static struct resource mmc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_MCI,
-		.end	= AT91SAM9260_BASE_MCI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_MCI,
-		.end	= AT91SAM9260_ID_MCI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9260_mmc_device = {
-	.name		= "at91_mci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &mmc_dmamask,
-				.coherent_dma_mask	= 0xffffffff,
-				.platform_data		= &mmc_data,
-	},
-	.resource	= mmc_resources,
-	.num_resources	= ARRAY_SIZE(mmc_resources),
-};
-
-void __init at91_add_device_mmc(struct at91_mmc_data *data)
-{
-	if (!data)
-		return;
-
-	/* input/irq */
-	if (data->det_pin) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (data->wp_pin)
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (data->vcc_pin)
-		at91_set_gpio_output(data->vcc_pin, 0);
-
-	/* CLK */
-	at91_set_A_periph(AT91_PIN_PA8, 0);
-
-	if (data->slot_b) {
-		/* CMD */
-		at91_set_B_periph(AT91_PIN_PA1, 1);
-
-		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_B_periph(AT91_PIN_PA0, 1);
-		if (data->wire4) {
-			at91_set_B_periph(AT91_PIN_PA5, 1);
-			at91_set_B_periph(AT91_PIN_PA4, 1);
-			at91_set_B_periph(AT91_PIN_PA3, 1);
-		}
-	} else {
-		/* CMD */
-		at91_set_A_periph(AT91_PIN_PA7, 1);
-
-		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_A_periph(AT91_PIN_PA6, 1);
-		if (data->wire4) {
-			at91_set_A_periph(AT91_PIN_PA9, 1);
-			at91_set_A_periph(AT91_PIN_PA10, 1);
-			at91_set_A_periph(AT91_PIN_PA11, 1);
-		}
-	}
-
-	mmc_data = *data;
-	platform_device_register(&at91sam9260_mmc_device);
-}
-#else
-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
-
-#define NAND_BASE	AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
-	{
-		.start	= NAND_BASE,
-		.end	= NAND_BASE + SZ_8M - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at91sam9260_nand_device = {
-	.name		= "at91_nand",
-	.id		= -1,
-	.dev		= {
-				.platform_data	= &nand_data,
-	},
-	.resource	= nand_resources,
-	.num_resources	= ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct at91_nand_data *data)
-{
-	unsigned long csa, mode;
-
-	if (!data)
-		return;
-
-	csa = at91_sys_read(AT91_MATRIX_EBICSA);
-	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
-
-	/* set the bus interface characteristics */
-	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
-			| AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
-
-	at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
-			| AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
-
-	at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
-
-	if (data->bus_width_16)
-		mode = AT91_SMC_DBW_16;
-	else
-		mode = AT91_SMC_DBW_8;
-	at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
-
-	/* enable pin */
-	if (data->enable_pin)
-		at91_set_gpio_output(data->enable_pin, 1);
-
-	/* ready/busy pin */
-	if (data->rdy_pin)
-		at91_set_gpio_input(data->rdy_pin, 1);
-
-	/* card detect pin */
-	if (data->det_pin)
-		at91_set_gpio_input(data->det_pin, 1);
-
-	nand_data = *data;
-	platform_device_register(&at91sam9260_nand_device);
-}
-#else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  TWI (i2c)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_TWI,
-		.end	= AT91SAM9260_BASE_TWI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_TWI,
-		.end	= AT91SAM9260_ID_TWI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9260_twi_device = {
-	.name		= "at91_i2c",
-	.id		= -1,
-	.resource	= twi_resources,
-	.num_resources	= ARRAY_SIZE(twi_resources),
-};
-
-void __init at91_add_device_i2c(void)
-{
-	/* pins used for TWI interface */
-	at91_set_A_periph(AT91_PIN_PA23, 0);		/* TWD */
-	at91_set_multi_drive(AT91_PIN_PA23, 1);
-
-	at91_set_A_periph(AT91_PIN_PA24, 0);		/* TWCK */
-	at91_set_multi_drive(AT91_PIN_PA24, 1);
-
-	platform_device_register(&at91sam9260_twi_device);
-}
-#else
-void __init at91_add_device_i2c(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = 0xffffffffUL;
-
-static struct resource spi0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_SPI0,
-		.end	= AT91SAM9260_BASE_SPI0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_SPI0,
-		.end	= AT91SAM9260_ID_SPI0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9260_spi0_device = {
-	.name		= "atmel_spi",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &spi_dmamask,
-				.coherent_dma_mask	= 0xffffffff,
-	},
-	.resource	= spi0_resources,
-	.num_resources	= ARRAY_SIZE(spi0_resources),
-};
-
-static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PC11, AT91_PIN_PC16, AT91_PIN_PC17 };
-
-static struct resource spi1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_SPI1,
-		.end	= AT91SAM9260_BASE_SPI1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_SPI1,
-		.end	= AT91SAM9260_ID_SPI1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9260_spi1_device = {
-	.name		= "atmel_spi",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &spi_dmamask,
-				.coherent_dma_mask	= 0xffffffff,
-	},
-	.resource	= spi1_resources,
-	.num_resources	= ARRAY_SIZE(spi1_resources),
-};
-
-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 };
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
-	int i;
-	unsigned long cs_pin;
-	short enable_spi0 = 0;
-	short enable_spi1 = 0;
-
-	/* Choose SPI chip-selects */
-	for (i = 0; i < nr_devices; i++) {
-		if (devices[i].controller_data)
-			cs_pin = (unsigned long) devices[i].controller_data;
-		else if (devices[i].bus_num == 0)
-			cs_pin = spi0_standard_cs[devices[i].chip_select];
-		else
-			cs_pin = spi1_standard_cs[devices[i].chip_select];
-
-		if (devices[i].bus_num == 0)
-			enable_spi0 = 1;
-		else
-			enable_spi1 = 1;
-
-		/* enable chip-select pin */
-		at91_set_gpio_output(cs_pin, 1);
-
-		/* pass chip-select pin to driver */
-		devices[i].controller_data = (void *) cs_pin;
-	}
-
-	spi_register_board_info(devices, nr_devices);
-
-	/* Configure SPI bus(es) */
-	if (enable_spi0) {
-		at91_set_A_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
-		at91_set_A_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
-		at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPI1_SPCK */
-
-		at91_clock_associate("spi0_clk", &at91sam9260_spi0_device.dev, "spi_clk");
-		platform_device_register(&at91sam9260_spi0_device);
-	}
-	if (enable_spi1) {
-		at91_set_A_periph(AT91_PIN_PB0, 0);	/* SPI1_MISO */
-		at91_set_A_periph(AT91_PIN_PB1, 0);	/* SPI1_MOSI */
-		at91_set_A_periph(AT91_PIN_PB2, 0);	/* SPI1_SPCK */
-
-		at91_clock_associate("spi1_clk", &at91sam9260_spi1_device.dev, "spi_clk");
-		platform_device_register(&at91sam9260_spi1_device);
-	}
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  LEDs
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_LEDS)
-u8 at91_leds_cpu;
-u8 at91_leds_timer;
-
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
-{
-	at91_leds_cpu	= cpu_led;
-	at91_leds_timer	= timer_led;
-}
-#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  UART
- * -------------------------------------------------------------------- */
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
-	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91_ID_SYS,
-		.end	= AT91_ID_SYS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data dbgu_data = {
-	.use_dma_tx	= 0,
-	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
-};
-
-static struct platform_device at91sam9260_dbgu_device = {
-	.name		= "atmel_usart",
-	.id		= 0,
-	.dev		= {
-				.platform_data	= &dbgu_data,
-				.coherent_dma_mask = 0xffffffff,
-	},
-	.resource	= dbgu_resources,
-	.num_resources	= ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
-	at91_set_A_periph(AT91_PIN_PB14, 0);		/* DRXD */
-	at91_set_A_periph(AT91_PIN_PB15, 1);		/* DTXD */
-}
-
-static struct resource uart0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_US0,
-		.end	= AT91SAM9260_BASE_US0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_US0,
-		.end	= AT91SAM9260_ID_US0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart0_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static struct platform_device at91sam9260_uart0_device = {
-	.name		= "atmel_usart",
-	.id		= 1,
-	.dev		= {
-				.platform_data	= &uart0_data,
-				.coherent_dma_mask = 0xffffffff,
-	},
-	.resource	= uart0_resources,
-	.num_resources	= ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(void)
-{
-	at91_set_A_periph(AT91_PIN_PB4, 1);		/* TXD0 */
-	at91_set_A_periph(AT91_PIN_PB5, 0);		/* RXD0 */
-	at91_set_A_periph(AT91_PIN_PB26, 0);		/* RTS0 */
-	at91_set_A_periph(AT91_PIN_PB27, 0);		/* CTS0 */
-	at91_set_A_periph(AT91_PIN_PB24, 0);		/* DTR0 */
-	at91_set_A_periph(AT91_PIN_PB22, 0);		/* DSR0 */
-	at91_set_A_periph(AT91_PIN_PB23, 0);		/* DCD0 */
-	at91_set_A_periph(AT91_PIN_PB25, 0);		/* RI0 */
-}
-
-static struct resource uart1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_US1,
-		.end	= AT91SAM9260_BASE_US1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_US1,
-		.end	= AT91SAM9260_ID_US1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart1_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static struct platform_device at91sam9260_uart1_device = {
-	.name		= "atmel_usart",
-	.id		= 2,
-	.dev		= {
-				.platform_data	= &uart1_data,
-				.coherent_dma_mask = 0xffffffff,
-	},
-	.resource	= uart1_resources,
-	.num_resources	= ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(void)
-{
-	at91_set_A_periph(AT91_PIN_PB6, 1);		/* TXD1 */
-	at91_set_A_periph(AT91_PIN_PB7, 0);		/* RXD1 */
-	at91_set_A_periph(AT91_PIN_PB28, 0);		/* RTS1 */
-	at91_set_A_periph(AT91_PIN_PB29, 0);		/* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_US2,
-		.end	= AT91SAM9260_BASE_US2 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_US2,
-		.end	= AT91SAM9260_ID_US2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart2_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static struct platform_device at91sam9260_uart2_device = {
-	.name		= "atmel_usart",
-	.id		= 3,
-	.dev		= {
-				.platform_data	= &uart2_data,
-				.coherent_dma_mask = 0xffffffff,
-	},
-	.resource	= uart2_resources,
-	.num_resources	= ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(void)
-{
-	at91_set_A_periph(AT91_PIN_PB8, 1);		/* TXD2 */
-	at91_set_A_periph(AT91_PIN_PB9, 0);		/* RXD2 */
-}
-
-static struct resource uart3_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_US3,
-		.end	= AT91SAM9260_BASE_US3 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_US3,
-		.end	= AT91SAM9260_ID_US3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart3_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static struct platform_device at91sam9260_uart3_device = {
-	.name		= "atmel_usart",
-	.id		= 4,
-	.dev		= {
-				.platform_data	= &uart3_data,
-				.coherent_dma_mask = 0xffffffff,
-	},
-	.resource	= uart3_resources,
-	.num_resources	= ARRAY_SIZE(uart3_resources),
-};
-
-static inline void configure_usart3_pins(void)
-{
-	at91_set_A_periph(AT91_PIN_PB10, 1);		/* TXD3 */
-	at91_set_A_periph(AT91_PIN_PB11, 0);		/* RXD3 */
-}
-
-static struct resource uart4_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_US4,
-		.end	= AT91SAM9260_BASE_US4 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_US4,
-		.end	= AT91SAM9260_ID_US4,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart4_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static struct platform_device at91sam9260_uart4_device = {
-	.name		= "atmel_usart",
-	.id		= 5,
-	.dev		= {
-				.platform_data	= &uart4_data,
-				.coherent_dma_mask = 0xffffffff,
-	},
-	.resource	= uart4_resources,
-	.num_resources	= ARRAY_SIZE(uart4_resources),
-};
-
-static inline void configure_usart4_pins(void)
-{
-	at91_set_B_periph(AT91_PIN_PA31, 1);		/* TXD4 */
-	at91_set_B_periph(AT91_PIN_PA30, 0);		/* RXD4 */
-}
-
-static struct resource uart5_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_US5,
-		.end	= AT91SAM9260_BASE_US5 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_US5,
-		.end	= AT91SAM9260_ID_US5,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart5_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static struct platform_device at91sam9260_uart5_device = {
-	.name		= "atmel_usart",
-	.id		= 6,
-	.dev		= {
-				.platform_data	= &uart5_data,
-				.coherent_dma_mask = 0xffffffff,
-	},
-	.resource	= uart5_resources,
-	.num_resources	= ARRAY_SIZE(uart5_resources),
-};
-
-static inline void configure_usart5_pins(void)
-{
-	at91_set_A_periph(AT91_PIN_PB12, 1);		/* TXD5 */
-	at91_set_A_periph(AT91_PIN_PB13, 0);		/* RXD5 */
-}
-
-struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-struct platform_device *atmel_default_console_device;	/* the serial console device */
-
-void __init at91_init_serial(struct at91_uart_config *config)
-{
-	int i;
-
-	/* Fill in list of supported UARTs */
-	for (i = 0; i < config->nr_tty; i++) {
-		switch (config->tty_map[i]) {
-			case 0:
-				configure_usart0_pins();
-				at91_uarts[i] = &at91sam9260_uart0_device;
-				at91_clock_associate("usart0_clk", &at91sam9260_uart0_device.dev, "usart");
-				break;
-			case 1:
-				configure_usart1_pins();
-				at91_uarts[i] = &at91sam9260_uart1_device;
-				at91_clock_associate("usart1_clk", &at91sam9260_uart1_device.dev, "usart");
-				break;
-			case 2:
-				configure_usart2_pins();
-				at91_uarts[i] = &at91sam9260_uart2_device;
-				at91_clock_associate("usart2_clk", &at91sam9260_uart2_device.dev, "usart");
-				break;
-			case 3:
-				configure_usart3_pins();
-				at91_uarts[i] = &at91sam9260_uart3_device;
-				at91_clock_associate("usart3_clk", &at91sam9260_uart3_device.dev, "usart");
-				break;
-			case 4:
-				configure_usart4_pins();
-				at91_uarts[i] = &at91sam9260_uart4_device;
-				at91_clock_associate("usart4_clk", &at91sam9260_uart4_device.dev, "usart");
-				break;
-			case 5:
-				configure_usart5_pins();
-				at91_uarts[i] = &at91sam9260_uart5_device;
-				at91_clock_associate("usart5_clk", &at91sam9260_uart5_device.dev, "usart");
-				break;
-			case 6:
-				configure_dbgu_pins();
-				at91_uarts[i] = &at91sam9260_dbgu_device;
-				at91_clock_associate("mck", &at91sam9260_dbgu_device.dev, "usart");
-				break;
-			default:
-				continue;
-		}
-		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
-	}
-
-	/* Set serial console device */
-	if (config->console_tty < ATMEL_MAX_UART)
-		atmel_default_console_device = at91_uarts[config->console_tty];
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-
-void __init at91_add_device_serial(void)
-{
-	int i;
-
-	for (i = 0; i < ATMEL_MAX_UART; i++) {
-		if (at91_uarts[i])
-			platform_device_register(at91_uarts[i]);
-	}
-}
-#else
-void __init at91_init_serial(struct at91_uart_config *config) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-
-/* -------------------------------------------------------------------- */
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
-	return 0;
-}
-
-arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91rm9200/at91sam9261.c b/arch/arm/mach-at91rm9200/at91sam9261.c
deleted file mode 100644
index d242bb8..0000000
--- a/arch/arm/mach-at91rm9200/at91sam9261.c
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * arch/arm/mach-at91rm9200/at91sam9261.c
- *
- *  Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/module.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/arch/at91sam9261.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-
-#include "generic.h"
-#include "clock.h"
-
-static struct map_desc at91sam9261_io_desc[] __initdata = {
-	{
-		.virtual	= AT91_VA_BASE_SYS,
-		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9261_SRAM_SIZE,
-		.pfn		= __phys_to_pfn(AT91SAM9261_SRAM_BASE),
-		.length		= AT91SAM9261_SRAM_SIZE,
-		.type		= MT_DEVICE,
-	},
-};
-
-/* --------------------------------------------------------------------
- *  Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioA_clk = {
-	.name		= "pioA_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_PIOA,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioB_clk = {
-	.name		= "pioB_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_PIOB,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioC_clk = {
-	.name		= "pioC_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_PIOC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
-	.name		= "usart0_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_US0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
-	.name		= "usart1_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_US1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
-	.name		= "usart2_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_US2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc_clk = {
-	.name		= "mci_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_MCI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk udc_clk = {
-	.name		= "udc_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_UDP,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi_clk = {
-	.name		= "twi_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_TWI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
-	.name		= "spi0_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_SPI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
-	.name		= "spi1_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_SPI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ohci_clk = {
-	.name		= "ohci_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_UHP,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk lcdc_clk = {
-	.name		= "lcdc_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_LCDC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
-	&pioA_clk,
-	&pioB_clk,
-	&pioC_clk,
-	&usart0_clk,
-	&usart1_clk,
-	&usart2_clk,
-	&mmc_clk,
-	&udc_clk,
-	&twi_clk,
-	&spi0_clk,
-	&spi1_clk,
-	// ssc 0 .. ssc2
-	// tc0 .. tc2
-	&ohci_clk,
-	&lcdc_clk,
-	// irq0 .. irq2
-};
-
-/*
- * The four programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
-	.name		= "pck0",
-	.pmc_mask	= AT91_PMC_PCK0,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 0,
-};
-static struct clk pck1 = {
-	.name		= "pck1",
-	.pmc_mask	= AT91_PMC_PCK1,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 1,
-};
-static struct clk pck2 = {
-	.name		= "pck2",
-	.pmc_mask	= AT91_PMC_PCK2,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 2,
-};
-static struct clk pck3 = {
-	.name		= "pck3",
-	.pmc_mask	= AT91_PMC_PCK3,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 3,
-};
-
-/* HClocks */
-static struct clk hck0 = {
-	.name		= "hck0",
-	.pmc_mask	= AT91_PMC_HCK0,
-	.type		= CLK_TYPE_SYSTEM,
-	.id		= 0,
-};
-static struct clk hck1 = {
-	.name		= "hck1",
-	.pmc_mask	= AT91_PMC_HCK1,
-	.type		= CLK_TYPE_SYSTEM,
-	.id		= 1,
-};
-
-static void __init at91sam9261_register_clocks(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
-		clk_register(periph_clocks[i]);
-
-	clk_register(&pck0);
-	clk_register(&pck1);
-	clk_register(&pck2);
-	clk_register(&pck3);
-
-	clk_register(&hck0);
-	clk_register(&hck1);
-}
-
-/* --------------------------------------------------------------------
- *  GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at91sam9261_gpio[] = {
-	{
-		.id		= AT91SAM9261_ID_PIOA,
-		.offset		= AT91_PIOA,
-		.clock		= &pioA_clk,
-	}, {
-		.id		= AT91SAM9261_ID_PIOB,
-		.offset		= AT91_PIOB,
-		.clock		= &pioB_clk,
-	}, {
-		.id		= AT91SAM9261_ID_PIOC,
-		.offset		= AT91_PIOC,
-		.clock		= &pioC_clk,
-	}
-};
-
-static void at91sam9261_reset(void)
-{
-	at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
-}
-
-
-/* --------------------------------------------------------------------
- *  AT91SAM9261 processor initialization
- * -------------------------------------------------------------------- */
-
-void __init at91sam9261_initialize(unsigned long main_clock)
-{
-	/* Map peripherals */
-	iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
-
-	at91_arch_reset = at91sam9261_reset;
-	at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
-			| (1 << AT91SAM9261_ID_IRQ2);
-
-	/* Init clock subsystem */
-	at91_clock_init(main_clock);
-
-	/* Register the processor-specific clocks */
-	at91sam9261_register_clocks();
-
-	/* Register GPIO subsystem */
-	at91_gpio_init(at91sam9261_gpio, 3);
-}
-
-/* --------------------------------------------------------------------
- *  Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
-	7,	/* Advanced Interrupt Controller */
-	7,	/* System Peripherals */
-	0,	/* Parallel IO Controller A */
-	0,	/* Parallel IO Controller B */
-	0,	/* Parallel IO Controller C */
-	0,
-	6,	/* USART 0 */
-	6,	/* USART 1 */
-	6,	/* USART 2 */
-	0,	/* Multimedia Card Interface */
-	4,	/* USB Device Port */
-	0,	/* Two-Wire Interface */
-	6,	/* Serial Peripheral Interface 0 */
-	6,	/* Serial Peripheral Interface 1 */
-	5,	/* Serial Synchronous Controller 0 */
-	5,	/* Serial Synchronous Controller 1 */
-	5,	/* Serial Synchronous Controller 2 */
-	0,	/* Timer Counter 0 */
-	0,	/* Timer Counter 1 */
-	0,	/* Timer Counter 2 */
-	3,	/* USB Host port */
-	3,	/* LCD Controller */
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,	/* Advanced Interrupt Controller */
-	0,	/* Advanced Interrupt Controller */
-	0,	/* Advanced Interrupt Controller */
-};
-
-void __init at91sam9261_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-{
-	if (!priority)
-		priority = at91sam9261_default_irq_priority;
-
-	/* Initialize the AIC interrupt controller */
-	at91_aic_init(priority);
-
-	/* Enable GPIO interrupts */
-	at91_gpio_irq_setup();
-}
diff --git a/arch/arm/mach-at91rm9200/at91sam9261_devices.c b/arch/arm/mach-at91rm9200/at91sam9261_devices.c
deleted file mode 100644
index ed1d790..0000000
--- a/arch/arm/mach-at91rm9200/at91sam9261_devices.c
+++ /dev/null
@@ -1,741 +0,0 @@
-/*
- * arch/arm/mach-at91rm9200/at91sam9261_devices.c
- *
- *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
- *  Copyright (C) 2005 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/platform_device.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9261.h>
-#include <asm/arch/at91sam9261_matrix.h>
-#include <asm/arch/at91sam926x_mc.h>
-
-#include "generic.h"
-
-#define SZ_512	0x00000200
-#define SZ_256	0x00000100
-#define SZ_16	0x00000010
-
-/* --------------------------------------------------------------------
- *  USB Host
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = 0xffffffffUL;
-static struct at91_usbh_data usbh_data;
-
-static struct resource usbh_resources[] = {
-	[0] = {
-		.start	= AT91SAM9261_UHP_BASE,
-		.end	= AT91SAM9261_UHP_BASE + SZ_1M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9261_ID_UHP,
-		.end	= AT91SAM9261_ID_UHP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9261_usbh_device = {
-	.name		= "at91_ohci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &ohci_dmamask,
-				.coherent_dma_mask	= 0xffffffff,
-				.platform_data		= &usbh_data,
-	},
-	.resource	= usbh_resources,
-	.num_resources	= ARRAY_SIZE(usbh_resources),
-};
-
-void __init at91_add_device_usbh(struct at91_usbh_data *data)
-{
-	if (!data)
-		return;
-
-	usbh_data = *data;
-	platform_device_register(&at91sam9261_usbh_device);
-}
-#else
-void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  USB Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_USB_GADGET_AT91
-static struct at91_udc_data udc_data;
-
-static struct resource udc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9261_BASE_UDP,
-		.end	= AT91SAM9261_BASE_UDP + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9261_ID_UDP,
-		.end	= AT91SAM9261_ID_UDP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9261_udc_device = {
-	.name		= "at91_udc",
-	.id		= -1,
-	.dev		= {
-				.platform_data		= &udc_data,
-	},
-	.resource	= udc_resources,
-	.num_resources	= ARRAY_SIZE(udc_resources),
-};
-
-void __init at91_add_device_udc(struct at91_udc_data *data)
-{
-	unsigned long x;
-
-	if (!data)
-		return;
-
-	if (data->vbus_pin) {
-		at91_set_gpio_input(data->vbus_pin, 0);
-		at91_set_deglitch(data->vbus_pin, 1);
-	}
-
-	/* Pullup pin is handled internally */
-	x = at91_sys_read(AT91_MATRIX_USBPUCR);
-	at91_sys_write(AT91_MATRIX_USBPUCR, x | AT91_MATRIX_USBPUCR_PUON);
-
-	udc_data = *data;
-	platform_device_register(&at91sam9261_udc_device);
-}
-#else
-void __init at91_add_device_udc(struct at91_udc_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
- *  MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = 0xffffffffUL;
-static struct at91_mmc_data mmc_data;
-
-static struct resource mmc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9261_BASE_MCI,
-		.end	= AT91SAM9261_BASE_MCI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9261_ID_MCI,
-		.end	= AT91SAM9261_ID_MCI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9261_mmc_device = {
-	.name		= "at91_mci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &mmc_dmamask,
-				.coherent_dma_mask	= 0xffffffff,
-				.platform_data		= &mmc_data,
-	},
-	.resource	= mmc_resources,
-	.num_resources	= ARRAY_SIZE(mmc_resources),
-};
-
-void __init at91_add_device_mmc(struct at91_mmc_data *data)
-{
-	if (!data)
-		return;
-
-	/* input/irq */
-	if (data->det_pin) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (data->wp_pin)
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (data->vcc_pin)
-		at91_set_gpio_output(data->vcc_pin, 0);
-
-	/* CLK */
-	at91_set_B_periph(AT91_PIN_PA2, 0);
-
-	/* CMD */
-	at91_set_B_periph(AT91_PIN_PA1, 1);
-
-	/* DAT0, maybe DAT1..DAT3 */
-	at91_set_B_periph(AT91_PIN_PA0, 1);
-	if (data->wire4) {
-		at91_set_B_periph(AT91_PIN_PA4, 1);
-		at91_set_B_periph(AT91_PIN_PA5, 1);
-		at91_set_B_periph(AT91_PIN_PA6, 1);
-	}
-
-	mmc_data = *data;
-	platform_device_register(&at91sam9261_mmc_device);
-}
-#else
-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
-
-#define NAND_BASE	AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
-	{
-		.start	= NAND_BASE,
-		.end	= NAND_BASE + SZ_256M - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at91_nand_device = {
-	.name		= "at91_nand",
-	.id		= -1,
-	.dev		= {
-				.platform_data	= &nand_data,
-	},
-	.resource	= nand_resources,
-	.num_resources	= ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct at91_nand_data *data)
-{
-	unsigned long csa, mode;
-
-	if (!data)
-		return;
-
-	csa = at91_sys_read(AT91_MATRIX_EBICSA);
-	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
-
-	/* set the bus interface characteristics */
-	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
-			| AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
-
-	at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
-			| AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
-
-	at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
-
-	if (data->bus_width_16)
-		mode = AT91_SMC_DBW_16;
-	else
-		mode = AT91_SMC_DBW_8;
-	at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
-
-	/* enable pin */
-	if (data->enable_pin)
-		at91_set_gpio_output(data->enable_pin, 1);
-
-	/* ready/busy pin */
-	if (data->rdy_pin)
-		at91_set_gpio_input(data->rdy_pin, 1);
-
-	/* card detect pin */
-	if (data->det_pin)
-		at91_set_gpio_input(data->det_pin, 1);
-
-	at91_set_A_periph(AT91_PIN_PC0, 0);		/* NANDOE */
-	at91_set_A_periph(AT91_PIN_PC1, 0);		/* NANDWE */
-
-	nand_data = *data;
-	platform_device_register(&at91_nand_device);
-}
-
-#else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  TWI (i2c)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
-	[0] = {
-		.start	= AT91SAM9261_BASE_TWI,
-		.end	= AT91SAM9261_BASE_TWI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9261_ID_TWI,
-		.end	= AT91SAM9261_ID_TWI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9261_twi_device = {
-	.name		= "at91_i2c",
-	.id		= -1,
-	.resource	= twi_resources,
-	.num_resources	= ARRAY_SIZE(twi_resources),
-};
-
-void __init at91_add_device_i2c(void)
-{
-	/* pins used for TWI interface */
-	at91_set_A_periph(AT91_PIN_PA7, 0);		/* TWD */
-	at91_set_multi_drive(AT91_PIN_PA7, 1);
-
-	at91_set_A_periph(AT91_PIN_PA8, 0);		/* TWCK */
-	at91_set_multi_drive(AT91_PIN_PA8, 1);
-
-	platform_device_register(&at91sam9261_twi_device);
-}
-#else
-void __init at91_add_device_i2c(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = 0xffffffffUL;
-
-static struct resource spi0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9261_BASE_SPI0,
-		.end	= AT91SAM9261_BASE_SPI0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9261_ID_SPI0,
-		.end	= AT91SAM9261_ID_SPI0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9261_spi0_device = {
-	.name		= "atmel_spi",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &spi_dmamask,
-				.coherent_dma_mask	= 0xffffffff,
-	},
-	.resource	= spi0_resources,
-	.num_resources	= ARRAY_SIZE(spi0_resources),
-};
-
-static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
-
-static struct resource spi1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9261_BASE_SPI1,
-		.end	= AT91SAM9261_BASE_SPI1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9261_ID_SPI1,
-		.end	= AT91SAM9261_ID_SPI1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9261_spi1_device = {
-	.name		= "atmel_spi",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &spi_dmamask,
-				.coherent_dma_mask	= 0xffffffff,
-	},
-	.resource	= spi1_resources,
-	.num_resources	= ARRAY_SIZE(spi1_resources),
-};
-
-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB28, AT91_PIN_PA24, AT91_PIN_PA25, AT91_PIN_PA26 };
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
-	int i;
-	unsigned long cs_pin;
-	short enable_spi0 = 0;
-	short enable_spi1 = 0;
-
-	/* Choose SPI chip-selects */
-	for (i = 0; i < nr_devices; i++) {
-		if (devices[i].controller_data)
-			cs_pin = (unsigned long) devices[i].controller_data;
-		else if (devices[i].bus_num == 0)
-			cs_pin = spi0_standard_cs[devices[i].chip_select];
-		else
-			cs_pin = spi1_standard_cs[devices[i].chip_select];
-
-		if (devices[i].bus_num == 0)
-			enable_spi0 = 1;
-		else
-			enable_spi1 = 1;
-
-		/* enable chip-select pin */
-		at91_set_gpio_output(cs_pin, 1);
-
-		/* pass chip-select pin to driver */
-		devices[i].controller_data = (void *) cs_pin;
-	}
-
-	spi_register_board_info(devices, nr_devices);
-
-	/* Configure SPI bus(es) */
-	if (enable_spi0) {
-		at91_set_A_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
-		at91_set_A_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
-		at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
-
-		at91_clock_associate("spi0_clk", &at91sam9261_spi0_device.dev, "spi_clk");
-		platform_device_register(&at91sam9261_spi0_device);
-	}
-	if (enable_spi1) {
-		at91_set_A_periph(AT91_PIN_PB30, 0);	/* SPI1_MISO */
-		at91_set_A_periph(AT91_PIN_PB31, 0);	/* SPI1_MOSI */
-		at91_set_A_periph(AT91_PIN_PB29, 0);	/* SPI1_SPCK */
-
-		at91_clock_associate("spi1_clk", &at91sam9261_spi1_device.dev, "spi_clk");
-		platform_device_register(&at91sam9261_spi1_device);
-	}
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  LCD Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_FB_AT91) || defined(CONFIG_FB_AT91_MODULE)
-static u64 lcdc_dmamask = 0xffffffffUL;
-static struct at91fb_info lcdc_data;
-
-static struct resource lcdc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9261_LCDC_BASE,
-		.end	= AT91SAM9261_LCDC_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9261_ID_LCDC,
-		.end	= AT91SAM9261_ID_LCDC,
-		.flags	= IORESOURCE_IRQ,
-	},
-#if defined(CONFIG_FB_INTSRAM)
-	[2] = {
-		.start	= AT91SAM9261_SRAM_BASE,
-		.end	= AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-#endif
-};
-
-static struct platform_device at91_lcdc_device = {
-	.name		= "at91-fb",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &lcdc_dmamask,
-				.coherent_dma_mask	= 0xffffffff,
-				.platform_data		= &lcdc_data,
-	},
-	.resource	= lcdc_resources,
-	.num_resources	= ARRAY_SIZE(lcdc_resources),
-};
-
-void __init at91_add_device_lcdc(struct at91fb_info *data)
-{
-	if (!data) {
-		return;
-	}
-
-	at91_set_A_periph(AT91_PIN_PB1, 0);	/* LCDHSYNC */
-	at91_set_A_periph(AT91_PIN_PB2, 0);	/* LCDDOTCK */
-	at91_set_A_periph(AT91_PIN_PB3, 0);	/* LCDDEN */
-	at91_set_A_periph(AT91_PIN_PB4, 0);	/* LCDCC */
-	at91_set_A_periph(AT91_PIN_PB7, 0);	/* LCDD2 */
-	at91_set_A_periph(AT91_PIN_PB8, 0);	/* LCDD3 */
-	at91_set_A_periph(AT91_PIN_PB9, 0);	/* LCDD4 */
-	at91_set_A_periph(AT91_PIN_PB10, 0);	/* LCDD5 */
-	at91_set_A_periph(AT91_PIN_PB11, 0);	/* LCDD6 */
-	at91_set_A_periph(AT91_PIN_PB12, 0);	/* LCDD7 */
-	at91_set_A_periph(AT91_PIN_PB15, 0);	/* LCDD10 */
-	at91_set_A_periph(AT91_PIN_PB16, 0);	/* LCDD11 */
-	at91_set_A_periph(AT91_PIN_PB17, 0);	/* LCDD12 */
-	at91_set_A_periph(AT91_PIN_PB18, 0);	/* LCDD13 */
-	at91_set_A_periph(AT91_PIN_PB19, 0);	/* LCDD14 */
-	at91_set_A_periph(AT91_PIN_PB20, 0);	/* LCDD15 */
-	at91_set_B_periph(AT91_PIN_PB23, 0);	/* LCDD18 */
-	at91_set_B_periph(AT91_PIN_PB24, 0);	/* LCDD19 */
-	at91_set_B_periph(AT91_PIN_PB25, 0);	/* LCDD20 */
-	at91_set_B_periph(AT91_PIN_PB26, 0);	/* LCDD21 */
-	at91_set_B_periph(AT91_PIN_PB27, 0);	/* LCDD22 */
-	at91_set_B_periph(AT91_PIN_PB28, 0);	/* LCDD23 */
-
-	lcdc_data = *data;
-	platform_device_register(&at91_lcdc_device);
-}
-#else
-void __init at91_add_device_lcdc(struct at91fb_info *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  LEDs
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_LEDS)
-u8 at91_leds_cpu;
-u8 at91_leds_timer;
-
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
-{
-	at91_leds_cpu	= cpu_led;
-	at91_leds_timer	= timer_led;
-}
-#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  UART
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
-	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91_ID_SYS,
-		.end	= AT91_ID_SYS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data dbgu_data = {
-	.use_dma_tx	= 0,
-	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
-};
-
-static struct platform_device at91sam9261_dbgu_device = {
-	.name		= "atmel_usart",
-	.id		= 0,
-	.dev		= {
-				.platform_data	= &dbgu_data,
-				.coherent_dma_mask = 0xffffffff,
-	},
-	.resource	= dbgu_resources,
-	.num_resources	= ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
-	at91_set_A_periph(AT91_PIN_PA9, 0);		/* DRXD */
-	at91_set_A_periph(AT91_PIN_PA10, 1);		/* DTXD */
-}
-
-static struct resource uart0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9261_BASE_US0,
-		.end	= AT91SAM9261_BASE_US0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9261_ID_US0,
-		.end	= AT91SAM9261_ID_US0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart0_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static struct platform_device at91sam9261_uart0_device = {
-	.name		= "atmel_usart",
-	.id		= 1,
-	.dev		= {
-				.platform_data	= &uart0_data,
-				.coherent_dma_mask = 0xffffffff,
-	},
-	.resource	= uart0_resources,
-	.num_resources	= ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(void)
-{
-	at91_set_A_periph(AT91_PIN_PC8, 1);		/* TXD0 */
-	at91_set_A_periph(AT91_PIN_PC9, 0);		/* RXD0 */
-	at91_set_A_periph(AT91_PIN_PC10, 0);		/* RTS0 */
-	at91_set_A_periph(AT91_PIN_PC11, 0);		/* CTS0 */
-}
-
-static struct resource uart1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9261_BASE_US1,
-		.end	= AT91SAM9261_BASE_US1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9261_ID_US1,
-		.end	= AT91SAM9261_ID_US1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart1_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static struct platform_device at91sam9261_uart1_device = {
-	.name		= "atmel_usart",
-	.id		= 2,
-	.dev		= {
-				.platform_data	= &uart1_data,
-				.coherent_dma_mask = 0xffffffff,
-	},
-	.resource	= uart1_resources,
-	.num_resources	= ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(void)
-{
-	at91_set_A_periph(AT91_PIN_PC12, 1);		/* TXD1 */
-	at91_set_A_periph(AT91_PIN_PC13, 0);		/* RXD1 */
-}
-
-static struct resource uart2_resources[] = {
-	[0] = {
-		.start	= AT91SAM9261_BASE_US2,
-		.end	= AT91SAM9261_BASE_US2 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9261_ID_US2,
-		.end	= AT91SAM9261_ID_US2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart2_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static struct platform_device at91sam9261_uart2_device = {
-	.name		= "atmel_usart",
-	.id		= 3,
-	.dev		= {
-				.platform_data	= &uart2_data,
-				.coherent_dma_mask = 0xffffffff,
-	},
-	.resource	= uart2_resources,
-	.num_resources	= ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(void)
-{
-	at91_set_A_periph(AT91_PIN_PC15, 0);		/* RXD2 */
-	at91_set_A_periph(AT91_PIN_PC14, 1);		/* TXD2 */
-}
-
-struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-struct platform_device *atmel_default_console_device;	/* the serial console device */
-
-void __init at91_init_serial(struct at91_uart_config *config)
-{
-	int i;
-
-	/* Fill in list of supported UARTs */
-	for (i = 0; i < config->nr_tty; i++) {
-		switch (config->tty_map[i]) {
-			case 0:
-				configure_usart0_pins();
-				at91_uarts[i] = &at91sam9261_uart0_device;
-				at91_clock_associate("usart0_clk", &at91sam9261_uart0_device.dev, "usart");
-				break;
-			case 1:
-				configure_usart1_pins();
-				at91_uarts[i] = &at91sam9261_uart1_device;
-				at91_clock_associate("usart1_clk", &at91sam9261_uart1_device.dev, "usart");
-				break;
-			case 2:
-				configure_usart2_pins();
-				at91_uarts[i] = &at91sam9261_uart2_device;
-				at91_clock_associate("usart2_clk", &at91sam9261_uart2_device.dev, "usart");
-				break;
-			case 3:
-				configure_dbgu_pins();
-				at91_uarts[i] = &at91sam9261_dbgu_device;
-				at91_clock_associate("mck", &at91sam9261_dbgu_device.dev, "usart");
-				break;
-			default:
-				continue;
-		}
-		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
-	}
-
-	/* Set serial console device */
-	if (config->console_tty < ATMEL_MAX_UART)
-		atmel_default_console_device = at91_uarts[config->console_tty];
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-
-void __init at91_add_device_serial(void)
-{
-	int i;
-
-	for (i = 0; i < ATMEL_MAX_UART; i++) {
-		if (at91_uarts[i])
-			platform_device_register(at91_uarts[i]);
-	}
-}
-#else
-void __init at91_init_serial(struct at91_uart_config *config) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-
-/* -------------------------------------------------------------------- */
-
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
-	return 0;
-}
-
-arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91rm9200/at91sam926x_time.c b/arch/arm/mach-at91rm9200/at91sam926x_time.c
deleted file mode 100644
index 99df5f6..0000000
--- a/arch/arm/mach-at91rm9200/at91sam926x_time.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * linux/arch/arm/mach-at91rm9200/at91sam926x_time.c
- *
- * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France
- * Revision	 2005 M. Nicolas Diremdjian, ATMEL Rousset, France
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/time.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/mach/time.h>
-
-#include <asm/arch/at91_pit.h>
-
-
-#define PIT_CPIV(x)	((x) & AT91_PIT_CPIV)
-#define PIT_PICNT(x)	(((x) & AT91_PIT_PICNT) >> 20)
-
-/*
- * Returns number of microseconds since last timer interrupt.  Note that interrupts
- * will have been disabled by do_gettimeofday()
- *  'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
- *  'tick' is usecs per jiffy (linux/timex.h).
- */
-static unsigned long at91sam926x_gettimeoffset(void)
-{
-	unsigned long elapsed;
-	unsigned long t = at91_sys_read(AT91_PIT_PIIR);
-
-	elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t);		/* hardware clock cycles */
-
-	return (unsigned long)(elapsed * 1000000) / LATCH;
-}
-
-/*
- * IRQ handler for the timer.
- */
-static irqreturn_t at91sam926x_timer_interrupt(int irq, void *dev_id)
-{
-	volatile long nr_ticks;
-
-	if (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS) {	/* This is a shared interrupt */
-		write_seqlock(&xtime_lock);
-
-		/* Get number to ticks performed before interrupt and clear PIT interrupt */
-		nr_ticks = PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
-		do {
-			timer_tick();
-			nr_ticks--;
-		} while (nr_ticks);
-
-		write_sequnlock(&xtime_lock);
-		return IRQ_HANDLED;
-	} else
-		return IRQ_NONE;		/* not handled */
-}
-
-static struct irqaction at91sam926x_timer_irq = {
-	.name		= "at91_tick",
-	.flags		= IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER,
-	.handler	= at91sam926x_timer_interrupt
-};
-
-void at91sam926x_timer_reset(void)
-{
-	/* Disable timer */
-	at91_sys_write(AT91_PIT_MR, 0);
-
-	/* Clear any pending interrupts */
-	(void) at91_sys_read(AT91_PIT_PIVR);
-
-	/* Set Period Interval timer and enable its interrupt */
-	at91_sys_write(AT91_PIT_MR, (LATCH & AT91_PIT_PIV) | AT91_PIT_PITIEN | AT91_PIT_PITEN);
-}
-
-/*
- * Set up timer interrupt.
- */
-void __init at91sam926x_timer_init(void)
-{
-	/* Initialize and enable the timer */
-	at91sam926x_timer_reset();
-
-	/* Make IRQs happen for the system timer. */
-	setup_irq(AT91_ID_SYS, &at91sam926x_timer_irq);
-}
-
-#ifdef CONFIG_PM
-static void at91sam926x_timer_suspend(void)
-{
-	/* Disable timer */
-	at91_sys_write(AT91_PIT_MR, 0);
-}
-#else
-#define at91sam926x_timer_suspend	NULL
-#endif
-
-struct sys_timer at91sam926x_timer = {
-	.init		= at91sam926x_timer_init,
-	.offset		= at91sam926x_gettimeoffset,
-	.suspend	= at91sam926x_timer_suspend,
-	.resume		= at91sam926x_timer_reset,
-};
-
diff --git a/arch/arm/mach-at91rm9200/board-1arm.c b/arch/arm/mach-at91rm9200/board-1arm.c
deleted file mode 100644
index 971c3e2..0000000
--- a/arch/arm/mach-at91rm9200/board-1arm.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * linux/arch/arm/mach-at91rm9200/board-1arm.c
- *
- *  Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <asm/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-
-#include "generic.h"
-
-
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata onearm_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 3,
-	.tty_map	= { 4, 0, 1, -1, -1 },		/* ttyS0, ..., ttyS4 */
-};
-
-static void __init onearm_map_io(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
-
-	/* Setup the serial ports and console */
-	at91_init_serial(&onearm_uart_config);
-}
-
-static void __init onearm_init_irq(void)
-{
-	at91rm9200_init_interrupts(NULL);
-}
-
-static struct at91_eth_data __initdata onearm_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PC4,
-	.is_rmii	= 1,
-};
-
-static struct at91_usbh_data __initdata onearm_usbh_data = {
-	.ports		= 1,
-};
-
-static struct at91_udc_data __initdata onearm_udc_data = {
-	.vbus_pin	= AT91_PIN_PC2,
-	.pullup_pin	= AT91_PIN_PC3,
-};
-
-static void __init onearm_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* Ethernet */
-	at91_add_device_eth(&onearm_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&onearm_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&onearm_udc_data);
-}
-
-MACHINE_START(ONEARM, "Ajeco 1ARM single board computer")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
-	.timer		= &at91rm9200_timer,
-	.map_io		= onearm_map_io,
-	.init_irq	= onearm_init_irq,
-	.init_machine	= onearm_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91rm9200/board-carmeva.c b/arch/arm/mach-at91rm9200/board-carmeva.c
deleted file mode 100644
index 654f037..0000000
--- a/arch/arm/mach-at91rm9200/board-carmeva.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * linux/arch/arm/mach-at91rm9200/board-carmeva.c
- *
- *  Copyright (c) 2005 Peer Georgi
- *  		       Conitec Datasystems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <asm/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-
-#include "generic.h"
-
-
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata carmeva_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 2,
-	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
-};
-
-static void __init carmeva_map_io(void)
-{
-	/* Initialize processor: 20.000 MHz crystal */
-	at91rm9200_initialize(20000000, AT91RM9200_BGA);
-
-	/* Setup the serial ports and console */
-	at91_init_serial(&carmeva_uart_config);
-}
-
-static void __init carmeva_init_irq(void)
-{
-	at91rm9200_init_interrupts(NULL);
-}
-
-static struct at91_eth_data __initdata carmeva_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PC4,
-	.is_rmii	= 1,
-};
-
-static struct at91_usbh_data __initdata carmeva_usbh_data = {
-	.ports		= 2,
-};
-
-static struct at91_udc_data __initdata carmeva_udc_data = {
-	.vbus_pin	= AT91_PIN_PD12,
-	.pullup_pin	= AT91_PIN_PD9,
-};
-
-/* FIXME: user dependend */
-// static struct at91_cf_data __initdata carmeva_cf_data = {
-//	.det_pin	= AT91_PIN_PB0,
-//	.rst_pin	= AT91_PIN_PC5,
-	// .irq_pin	= ... not connected
-	// .vcc_pin	= ... always powered
-// };
-
-static struct at91_mmc_data __initdata carmeva_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PB10,
-	.wp_pin		= AT91_PIN_PC14,
-};
-
-static struct spi_board_info carmeva_spi_devices[] = {
-	{ /* DataFlash chip */
-		.modalias = "mtd_dataflash",
-		.chip_select  = 0,
-		.max_speed_hz = 10 * 1000 * 1000,
-	},
-	{ /* User accessable spi - cs1 (250KHz) */
-		.modalias = "spi-cs1",
-		.chip_select  = 1,
-		.max_speed_hz = 250 *  1000,
-	},
-	{ /* User accessable spi - cs2 (1MHz) */
-		.modalias = "spi-cs2",
-		.chip_select  = 2,
-		.max_speed_hz = 1 * 1000 *  1000,
-	},
-	{ /* User accessable spi - cs3 (10MHz) */
-		.modalias = "spi-cs3",
-		.chip_select  = 3,
-		.max_speed_hz = 10 * 1000 *  1000,
-	},
-};
-
-static void __init carmeva_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* Ethernet */
-	at91_add_device_eth(&carmeva_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&carmeva_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&carmeva_udc_data);
-	/* I2C */
-	at91_add_device_i2c();
-	/* SPI */
-	at91_add_device_spi(carmeva_spi_devices, ARRAY_SIZE(carmeva_spi_devices));
-	/* Compact Flash */
-//	at91_add_device_cf(&carmeva_cf_data);
-	/* MMC */
-	at91_add_device_mmc(&carmeva_mmc_data);
-}
-
-MACHINE_START(CARMEVA, "Carmeva")
-	/* Maintainer: Conitec Datasystems */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
-	.timer		= &at91rm9200_timer,
-	.map_io		= carmeva_map_io,
-	.init_irq	= carmeva_init_irq,
-	.init_machine	= carmeva_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91rm9200/board-csb337.c b/arch/arm/mach-at91rm9200/board-csb337.c
deleted file mode 100644
index b8bb805..0000000
--- a/arch/arm/mach-at91rm9200/board-csb337.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * linux/arch/arm/mach-at91rm9200/board-csb337.c
- *
- *  Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-
-#include <asm/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-
-#include "generic.h"
-
-
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata csb337_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 2,
-	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
-};
-
-static void __init csb337_map_io(void)
-{
-	/* Initialize processor: 3.6864 MHz crystal */
-	at91rm9200_initialize(3686400, AT91RM9200_BGA);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
-
-	/* Setup the serial ports and console */
-	at91_init_serial(&csb337_uart_config);
-}
-
-static void __init csb337_init_irq(void)
-{
-	at91rm9200_init_interrupts(NULL);
-}
-
-static struct at91_eth_data __initdata csb337_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PC2,
-	.is_rmii	= 0,
-};
-
-static struct at91_usbh_data __initdata csb337_usbh_data = {
-	.ports		= 2,
-};
-
-static struct at91_udc_data __initdata csb337_udc_data = {
-	// this has no VBUS sensing pin
-	.pullup_pin	= AT91_PIN_PA24,
-};
-
-static struct at91_cf_data __initdata csb337_cf_data = {
-	/*
-	 * connector P4 on the CSB 337 mates to
-	 * connector P8 on the CSB 300CF
-	 */
-
-	/* CSB337 specific */
-	.det_pin	= AT91_PIN_PC3,
-
-	/* CSB300CF specific */
-	.irq_pin	= AT91_PIN_PA19,
-	.vcc_pin	= AT91_PIN_PD0,
-	.rst_pin	= AT91_PIN_PD2,
-};
-
-static struct at91_mmc_data __initdata csb337_mmc_data = {
-	.det_pin	= AT91_PIN_PD5,
-	.slot_b		= 0,
-	.wire4		= 1,
-	.wp_pin		= AT91_PIN_PD6,
-};
-
-static struct spi_board_info csb337_spi_devices[] = {
-	{	/* CAN controller */
-		.modalias	= "sak82c900",
-		.chip_select	= 0,
-		.max_speed_hz	= 6 * 1000 * 1000,
-	},
-};
-
-static void __init csb337_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* Ethernet */
-	at91_add_device_eth(&csb337_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&csb337_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&csb337_udc_data);
-	/* I2C */
-	at91_add_device_i2c();
-	/* Compact Flash */
-	at91_set_gpio_input(AT91_PIN_PB22, 1);		/* IOIS16 */
-	at91_add_device_cf(&csb337_cf_data);
-	/* SPI */
-	at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
-	/* MMC */
-	at91_add_device_mmc(&csb337_mmc_data);
-}
-
-MACHINE_START(CSB337, "Cogent CSB337")
-	/* Maintainer: Bill Gatliff */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
-	.timer		= &at91rm9200_timer,
-	.map_io		= csb337_map_io,
-	.init_irq	= csb337_init_irq,
-	.init_machine	= csb337_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91rm9200/board-csb637.c b/arch/arm/mach-at91rm9200/board-csb637.c
deleted file mode 100644
index a29fa0e8..0000000
--- a/arch/arm/mach-at91rm9200/board-csb637.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * linux/arch/arm/mach-at91rm9200/board-csb637.c
- *
- *  Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <asm/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-
-#include "generic.h"
-
-
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata csb637_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 2,
-	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
-};
-
-static void __init csb637_map_io(void)
-{
-	/* Initialize processor: 3.6864 MHz crystal */
-	at91rm9200_initialize(3686400, AT91RM9200_BGA);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-
-	/* Setup the serial ports and console */
-	at91_init_serial(&csb637_uart_config);
-}
-
-static void __init csb637_init_irq(void)
-{
-	at91rm9200_init_interrupts(NULL);
-}
-
-static struct at91_eth_data __initdata csb637_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PC0,
-	.is_rmii	= 0,
-};
-
-static struct at91_usbh_data __initdata csb637_usbh_data = {
-	.ports		= 2,
-};
-
-static struct at91_udc_data __initdata csb637_udc_data = {
-	.vbus_pin     = AT91_PIN_PB28,
-	.pullup_pin   = AT91_PIN_PB1,
-};
-
-static void __init csb637_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* Ethernet */
-	at91_add_device_eth(&csb637_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&csb637_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&csb637_udc_data);
-	/* I2C */
-	at91_add_device_i2c();
-	/* SPI */
-	at91_add_device_spi(NULL, 0);
-}
-
-MACHINE_START(CSB637, "Cogent CSB637")
-	/* Maintainer: Bill Gatliff */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
-	.timer		= &at91rm9200_timer,
-	.map_io		= csb637_map_io,
-	.init_irq	= csb637_init_irq,
-	.init_machine	= csb637_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91rm9200/board-dk.c b/arch/arm/mach-at91rm9200/board-dk.c
deleted file mode 100644
index 7522bf9..0000000
--- a/arch/arm/mach-at91rm9200/board-dk.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * linux/arch/arm/mach-at91rm9200/board-dk.c
- *
- *  Copyright (C) 2005 SAN People
- *
- *  Epson S1D framebuffer glue code is:
- *     Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
-
-#include "generic.h"
-
-
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata dk_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 2,
-	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
-};
-
-static void __init dk_map_io(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_BGA);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-
-	/* Setup the serial ports and console */
-	at91_init_serial(&dk_uart_config);
-}
-
-static void __init dk_init_irq(void)
-{
-	at91rm9200_init_interrupts(NULL);
-}
-
-static struct at91_eth_data __initdata dk_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PC4,
-	.is_rmii	= 1,
-};
-
-static struct at91_usbh_data __initdata dk_usbh_data = {
-	.ports		= 2,
-};
-
-static struct at91_udc_data __initdata dk_udc_data = {
-	.vbus_pin	= AT91_PIN_PD4,
-	.pullup_pin	= AT91_PIN_PD5,
-};
-
-static struct at91_cf_data __initdata dk_cf_data = {
-	.det_pin	= AT91_PIN_PB0,
-	.rst_pin	= AT91_PIN_PC5,
-	// .irq_pin	= ... not connected
-	// .vcc_pin	= ... always powered
-};
-
-static struct at91_mmc_data __initdata dk_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-};
-
-static struct spi_board_info dk_spi_devices[] = {
-	{	/* DataFlash chip */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 15 * 1000 * 1000,
-	},
-	{	/* UR6HCPS2-SP40 PS2-to-SPI adapter */
-		.modalias	= "ur6hcps2",
-		.chip_select	= 1,
-		.max_speed_hz	= 250 *  1000,
-	},
-	{	/* TLV1504 ADC, 4 channels, 10 bits; one is a temp sensor */
-		.modalias	= "tlv1504",
-		.chip_select	= 2,
-		.max_speed_hz	= 20 * 1000 * 1000,
-	},
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-	{	/* DataFlash card */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 3,
-		.max_speed_hz	= 15 * 1000 * 1000,
-	}
-#endif
-};
-
-static struct mtd_partition __initdata dk_nand_partition[] = {
-	{
-		.name	= "NAND Partition 1",
-		.offset	= 0,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct mtd_partition *nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(dk_nand_partition);
-	return dk_nand_partition;
-}
-
-static struct at91_nand_data __initdata dk_nand_data = {
-	.ale		= 22,
-	.cle		= 21,
-	.det_pin	= AT91_PIN_PB1,
-	.rdy_pin	= AT91_PIN_PC2,
-	// .enable_pin	= ... not there
-	.partition_info	= nand_partitions,
-};
-
-#define DK_FLASH_BASE	AT91_CHIPSELECT_0
-#define DK_FLASH_SIZE	0x200000
-
-static struct physmap_flash_data dk_flash_data = {
-	.width	= 2,
-};
-
-static struct resource dk_flash_resource = {
-	.start		= DK_FLASH_BASE,
-	.end		= DK_FLASH_BASE + DK_FLASH_SIZE - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device dk_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-				.platform_data	= &dk_flash_data,
-			},
-	.resource	= &dk_flash_resource,
-	.num_resources	= 1,
-};
-
-
-static void __init dk_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* Ethernet */
-	at91_add_device_eth(&dk_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&dk_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&dk_udc_data);
-	at91_set_multi_drive(dk_udc_data.pullup_pin, 1);	/* pullup_pin is connected to reset */
-	/* Compact Flash */
-	at91_add_device_cf(&dk_cf_data);
-	/* I2C */
-	at91_add_device_i2c();
-	/* SPI */
-	at91_add_device_spi(dk_spi_devices, ARRAY_SIZE(dk_spi_devices));
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-	/* DataFlash card */
-	at91_set_gpio_output(AT91_PIN_PB7, 0);
-#else
-	/* MMC */
-	at91_set_gpio_output(AT91_PIN_PB7, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-	at91_add_device_mmc(&dk_mmc_data);
-#endif
-	/* NAND */
-	at91_add_device_nand(&dk_nand_data);
-	/* NOR Flash */
-	platform_device_register(&dk_flash);
-	/* VGA */
-//	dk_add_device_video();
-}
-
-MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
-	/* Maintainer: SAN People/Atmel */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
-	.timer		= &at91rm9200_timer,
-	.map_io		= dk_map_io,
-	.init_irq	= dk_init_irq,
-	.init_machine	= dk_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91rm9200/board-eb9200.c b/arch/arm/mach-at91rm9200/board-eb9200.c
deleted file mode 100644
index 80b72cf..0000000
--- a/arch/arm/mach-at91rm9200/board-eb9200.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * linux/arch/arm/mach-at91rm9200/board-eb9200.c
- *
- *  Copyright (C) 2005 SAN People, adapted for ATEB9200 from Embest
- *  by Andrew Patrikalakis
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/device.h>
-
-#include <asm/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-
-#include "generic.h"
-
-
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata eb9200_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 2,
-	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
-};
-
-static void __init eb9200_map_io(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_BGA);
-
-	/* Setup the serial ports and console */
-	at91_init_serial(&eb9200_uart_config);
-}
-
-static void __init eb9200_init_irq(void)
-{
-	at91rm9200_init_interrupts(NULL);
-}
-
-static struct at91_eth_data __initdata eb9200_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PC4,
-	.is_rmii	= 1,
-};
-
-static struct at91_usbh_data __initdata eb9200_usbh_data = {
-	.ports		= 2,
-};
-
-static struct at91_udc_data __initdata eb9200_udc_data = {
-	.vbus_pin	= AT91_PIN_PD4,
-	.pullup_pin	= AT91_PIN_PD5,
-};
-
-static struct at91_cf_data __initdata eb9200_cf_data = {
-	.det_pin	= AT91_PIN_PB0,
-	.rst_pin	= AT91_PIN_PC5,
-	// .irq_pin	= ... not connected
-	// .vcc_pin	= ... always powered
-};
-
-static struct at91_mmc_data __initdata eb9200_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-};
-
-static void __init eb9200_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* Ethernet */
-	at91_add_device_eth(&eb9200_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&eb9200_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&eb9200_udc_data);
-	/* I2C */
-	at91_add_device_i2c();
-	/* Compact Flash */
-	at91_add_device_cf(&eb9200_cf_data);
-	/* SPI */
-	at91_add_device_spi(NULL, 0);
-	/* MMC */
-	/* only supports 1 or 4 bit interface, not wired through to SPI */
-	at91_add_device_mmc(&eb9200_mmc_data);
-}
-
-MACHINE_START(ATEB9200, "Embest ATEB9200")
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
-	.timer		= &at91rm9200_timer,
-	.map_io		= eb9200_map_io,
-	.init_irq	= eb9200_init_irq,
-	.init_machine	= eb9200_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91rm9200/board-ek.c b/arch/arm/mach-at91rm9200/board-ek.c
deleted file mode 100644
index c4fdb41..0000000
--- a/arch/arm/mach-at91rm9200/board-ek.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * linux/arch/arm/mach-at91rm9200/board-ek.c
- *
- *  Copyright (C) 2005 SAN People
- *
- *  Epson S1D framebuffer glue code is:
- *     Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
-
-#include "generic.h"
-
-
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata ek_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 2,
-	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
-};
-
-static void __init ek_map_io(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_BGA);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
-
-	/* Setup the serial ports and console */
-	at91_init_serial(&ek_uart_config);
-}
-
-static void __init ek_init_irq(void)
-{
-	at91rm9200_init_interrupts(NULL);
-}
-
-static struct at91_eth_data __initdata ek_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PC4,
-	.is_rmii	= 1,
-};
-
-static struct at91_usbh_data __initdata ek_usbh_data = {
-	.ports		= 2,
-};
-
-static struct at91_udc_data __initdata ek_udc_data = {
-	.vbus_pin	= AT91_PIN_PD4,
-	.pullup_pin	= AT91_PIN_PD5,
-};
-
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.det_pin	= AT91_PIN_PB27,
-	.slot_b		= 0,
-	.wire4		= 1,
-	.wp_pin		= AT91_PIN_PA17,
-};
-
-static struct spi_board_info ek_spi_devices[] = {
-	{	/* DataFlash chip */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 15 * 1000 * 1000,
-	},
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-	{	/* DataFlash card */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 3,
-		.max_speed_hz	= 15 * 1000 * 1000,
-	},
-#endif
-};
-
-#define EK_FLASH_BASE	AT91_CHIPSELECT_0
-#define EK_FLASH_SIZE	0x200000
-
-static struct physmap_flash_data ek_flash_data = {
-	.width	= 2,
-};
-
-static struct resource ek_flash_resource = {
-	.start		= EK_FLASH_BASE,
-	.end		= EK_FLASH_BASE + EK_FLASH_SIZE - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device ek_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-				.platform_data	= &ek_flash_data,
-			},
-	.resource	= &ek_flash_resource,
-	.num_resources	= 1,
-};
-
-
-static void __init ek_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* Ethernet */
-	at91_add_device_eth(&ek_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&ek_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&ek_udc_data);
-	at91_set_multi_drive(ek_udc_data.pullup_pin, 1);	/* pullup_pin is connected to reset */
-	/* I2C */
-	at91_add_device_i2c();
-	/* SPI */
-	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-	/* DataFlash card */
-	at91_set_gpio_output(AT91_PIN_PB22, 0);
-#else
-	/* MMC */
-	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-	at91_add_device_mmc(&ek_mmc_data);
-#endif
-	/* NOR Flash */
-	platform_device_register(&ek_flash);
-	/* VGA */
-//	ek_add_device_video();
-}
-
-MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
-	/* Maintainer: SAN People/Atmel */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
-	.timer		= &at91rm9200_timer,
-	.map_io		= ek_map_io,
-	.init_irq	= ek_init_irq,
-	.init_machine	= ek_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91rm9200/board-kafa.c b/arch/arm/mach-at91rm9200/board-kafa.c
deleted file mode 100644
index 6ef3c48..0000000
--- a/arch/arm/mach-at91rm9200/board-kafa.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * linux/arch/arm/mach-at91rm9200/board-kafa.c
- *
- *  Copyright (C) 2006 Sperry-Sun
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <asm/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-
-#include "generic.h"
-
-
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata kafa_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 2,
-	.tty_map	= { 4, 0, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
-};
-
-static void __init kafa_map_io(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
-
-	/* Set up the LEDs */
-	at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
-
-	/* Setup the serial ports and console */
-	at91_init_serial(&kafa_uart_config);
-}
-
-static void __init kafa_init_irq(void)
-{
-	at91rm9200_init_interrupts(NULL);
-}
-
-static struct at91_eth_data __initdata kafa_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PC4,
-	.is_rmii	= 0,
-};
-
-static struct at91_usbh_data __initdata kafa_usbh_data = {
-	.ports		= 1,
-};
-
-static struct at91_udc_data __initdata kafa_udc_data = {
-	.vbus_pin	= AT91_PIN_PB6,
-	.pullup_pin	= AT91_PIN_PB7,
-};
-
-static void __init kafa_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* Ethernet */
-	at91_add_device_eth(&kafa_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&kafa_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&kafa_udc_data);
-	/* I2C */
-	at91_add_device_i2c();
-	/* SPI */
-	at91_add_device_spi(NULL, 0);
-}
-
-MACHINE_START(KAFA, "Sperry-Sun KAFA")
-	/* Maintainer: Sergei Sharonov */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
-	.timer		= &at91rm9200_timer,
-	.map_io		= kafa_map_io,
-	.init_irq	= kafa_init_irq,
-	.init_machine	= kafa_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91rm9200/board-kb9202.c b/arch/arm/mach-at91rm9200/board-kb9202.c
deleted file mode 100644
index 759d819..0000000
--- a/arch/arm/mach-at91rm9200/board-kb9202.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * linux/arch/arm/mach-at91rm9200/board-kb9202.c
- *
- *  Copyright (c) 2005 kb_admin
- *  		       KwikByte, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <asm/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-
-#include "generic.h"
-
-
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata kb9202_uart_config = {
-	.console_tty	= 0,					/* ttyS0 */
-	.nr_tty		= 3,
-	.tty_map	= { 4, 0, 1, -1, -1 }			/* ttyS0, ..., ttyS4 */
-};
-
-static void __init kb9202_map_io(void)
-{
-	/* Initialize processor: 10 MHz crystal */
-	at91rm9200_initialize(10000000, AT91RM9200_PQFP);
-
-	/* Set up the LEDs */
-	at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
-
-	/* Setup the serial ports and console */
-	at91_init_serial(&kb9202_uart_config);
-}
-
-static void __init kb9202_init_irq(void)
-{
-	at91rm9200_init_interrupts(NULL);
-}
-
-static struct at91_eth_data __initdata kb9202_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PB29,
-	.is_rmii	= 0,
-};
-
-static struct at91_usbh_data __initdata kb9202_usbh_data = {
-	.ports		= 1,
-};
-
-static struct at91_udc_data __initdata kb9202_udc_data = {
-	.vbus_pin	= AT91_PIN_PB24,
-	.pullup_pin	= AT91_PIN_PB22,
-};
-
-static struct at91_mmc_data __initdata kb9202_mmc_data = {
-	.det_pin	= AT91_PIN_PB2,
-	.slot_b		= 0,
-	.wire4		= 1,
-};
-
-static struct mtd_partition __initdata kb9202_nand_partition[] = {
-	{
-		.name	= "nand_fs",
-		.offset	= 0,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct mtd_partition *nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(kb9202_nand_partition);
-	return kb9202_nand_partition;
-}
-
-static struct at91_nand_data __initdata kb9202_nand_data = {
-	.ale		= 22,
-	.cle		= 21,
-	// .det_pin	= ... not there
-	.rdy_pin	= AT91_PIN_PC29,
-	.enable_pin	= AT91_PIN_PC28,
-	.partition_info	= nand_partitions,
-};
-
-static void __init kb9202_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* Ethernet */
-	at91_add_device_eth(&kb9202_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&kb9202_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&kb9202_udc_data);
-	/* MMC */
-	at91_add_device_mmc(&kb9202_mmc_data);
-	/* I2C */
-	at91_add_device_i2c();
-	/* SPI */
-	at91_add_device_spi(NULL, 0);
-	/* NAND */
-	at91_add_device_nand(&kb9202_nand_data);
-}
-
-MACHINE_START(KB9200, "KB920x")
-	/* Maintainer: KwikByte, Inc. */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
-	.timer		= &at91rm9200_timer,
-	.map_io		= kb9202_map_io,
-	.init_irq	= kb9202_init_irq,
-	.init_machine	= kb9202_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91rm9200/board-sam9260ek.c b/arch/arm/mach-at91rm9200/board-sam9260ek.c
deleted file mode 100644
index 37c7a7d..0000000
--- a/arch/arm/mach-at91rm9200/board-sam9260ek.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * linux/arch/arm/mach-at91rm9200/board-ek.c
- *
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2006 Atmel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-
-#include <asm/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam926x_mc.h>
-
-#include "generic.h"
-
-
-/*
- * Serial port configuration.
- *    0 .. 5 = USART0 .. USART5
- *    6      = DBGU
- */
-static struct at91_uart_config __initdata ek_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 3,
-	.tty_map	= { 6, 0, 1, -1, -1, -1, -1 }	/* ttyS0, ..., ttyS6 */
-};
-
-static void __init ek_map_io(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91sam9260_initialize(18432000);
-
-	/* Setup the serial ports and console */
-	at91_init_serial(&ek_uart_config);
-}
-
-static void __init ek_init_irq(void)
-{
-	at91sam9260_init_interrupts(NULL);
-}
-
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
-	.ports		= 2,
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
-	.vbus_pin	= AT91_PIN_PC5,
-	.pullup_pin	= 0,		/* pull-up driven by UDC */
-};
-
-
-/*
- * SPI devices.
- */
-static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
-	{	/* DataFlash chip */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 1,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
-	{	/* DataFlash card */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-#endif
-#endif
-#if defined(CONFIG_SND_AT73C213)
-	{	/* AT73C213 DAC */
-		.modalias	= "snd_at73c213",
-		.chip_select	= 0,
-		.max_speed_hz	= 10 * 1000 * 1000,
-		.bus_num	= 1,
-	},
-#endif
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct __initdata at91_eth_data ek_macb_data = {
-	.phy_irq_pin	= AT91_PIN_PA7,
-	.is_rmii	= 1,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
-	{
-		.name	= "Partition 1",
-		.offset	= 0,
-		.size	= 256 * 1024,
-	},
-	{
-		.name	= "Partition 2",
-		.offset	= 256 * 1024,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct mtd_partition *nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(ek_nand_partition);
-	return ek_nand_partition;
-}
-
-static struct at91_nand_data __initdata ek_nand_data = {
-	.ale		= 21,
-	.cle		= 22,
-//	.det_pin	= ... not connected
-	.rdy_pin	= AT91_PIN_PC13,
-	.enable_pin	= AT91_PIN_PC14,
-	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
-	.bus_width_16	= 1,
-#else
-	.bus_width_16	= 0,
-#endif
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.slot_b		= 1,
-	.wire4		= 1,
-//	.det_pin	= ... not connected
-//	.wp_pin		= ... not connected
-//	.vcc_pin	= ... not connected
-};
-
-static void __init ek_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* USB Host */
-	at91_add_device_usbh(&ek_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&ek_udc_data);
-	/* SPI */
-	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-	/* NAND */
-	at91_add_device_nand(&ek_nand_data);
-	/* Ethernet */
-	at91_add_device_eth(&ek_macb_data);
-	/* MMC */
-	at91_add_device_mmc(&ek_mmc_data);
-}
-
-MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
-	/* Maintainer: Atmel */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
-	.timer		= &at91sam926x_timer,
-	.map_io		= ek_map_io,
-	.init_irq	= ek_init_irq,
-	.init_machine	= ek_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91rm9200/board-sam9261ek.c b/arch/arm/mach-at91rm9200/board-sam9261ek.c
deleted file mode 100644
index 30b490d..0000000
--- a/arch/arm/mach-at91rm9200/board-sam9261ek.c
+++ /dev/null
@@ -1,259 +0,0 @@
-/*
- * linux/arch/arm/mach-at91rm9200/board-ek.c
- *
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2006 Atmel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/dm9000.h>
-
-#include <asm/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam926x_mc.h>
-
-#include "generic.h"
-
-
-/*
- * Serial port configuration.
- *    0 .. 2 = USART0 .. USART2
- *    3      = DBGU
- */
-static struct at91_uart_config __initdata ek_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 1,
-	.tty_map	= { 3, -1, -1, -1 }		/* ttyS0, ..., ttyS3 */
-};
-
-static void __init ek_map_io(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91sam9261_initialize(18432000);
-
-	/* Setup the serial ports and console */
-	at91_init_serial(&ek_uart_config);
-}
-
-static void __init ek_init_irq(void)
-{
-	at91sam9261_init_interrupts(NULL);
-}
-
-
-/*
- * DM9000 ethernet device
- */
-#if defined(CONFIG_DM9000)
-static struct resource at91sam9261_dm9000_resource[] = {
-	[0] = {
-		.start	= AT91_CHIPSELECT_2,
-		.end	= AT91_CHIPSELECT_2 + 3,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
-		.start	= AT91_CHIPSELECT_2 + 0x44,
-		.end	= AT91_CHIPSELECT_2 + 0xFF,
-		.flags	= IORESOURCE_MEM
-	},
-	[2] = {
-		.start	= AT91_PIN_PC11,
-		.end	= AT91_PIN_PC11,
-		.flags	= IORESOURCE_IRQ
-	}
-};
-
-static struct dm9000_plat_data dm9000_platdata = {
-	.flags		= DM9000_PLATF_16BITONLY,
-};
-
-static struct platform_device at91sam9261_dm9000_device = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(at91sam9261_dm9000_resource),
-	.resource	= at91sam9261_dm9000_resource,
-	.dev		= {
-		.platform_data	= &dm9000_platdata,
-	}
-};
-
-static void __init ek_add_device_dm9000(void)
-{
-	/*
-	 * Configure Chip-Select 2 on SMC for the DM9000.
-	 * Note: These timings were calculated for MASTER_CLOCK = 100000000
-	 *  according to the DM9000 timings.
-	 */
-	at91_sys_write(AT91_SMC_SETUP(2), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
-	at91_sys_write(AT91_SMC_PULSE(2), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(8) | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(8));
-	at91_sys_write(AT91_SMC_CYCLE(2), AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
-	at91_sys_write(AT91_SMC_MODE(2), AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 | AT91_SMC_TDF_(1));
-
-	/* Configure Reset signal as output */
-	at91_set_gpio_output(AT91_PIN_PC10, 0);
-
-	/* Configure Interrupt pin as input, no pull-up */
-	at91_set_gpio_input(AT91_PIN_PC11, 0);
-
-	platform_device_register(&at91sam9261_dm9000_device);
-}
-#else
-static void __init ek_add_device_dm9000(void) {}
-#endif /* CONFIG_DM9000 */
-
-
-/*
- * USB Host Port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
-	.ports		= 2,
-};
-
-
-/*
- * USB Device Port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
-	.vbus_pin	= AT91_PIN_PB29,
-	.pullup_pin	= 0,		/* pull-up driven by UDC */
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.wire4		= 1,
-//	.det_pin	= ... not connected
-//	.wp_pin		= ... not connected
-//	.vcc_pin	= ... not connected
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
-	{
-		.name	= "Partition 1",
-		.offset	= 0,
-		.size	= 256 * 1024,
-	},
-	{
-		.name	= "Partition 2",
-		.offset	= 256 * 1024 ,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct mtd_partition *nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(ek_nand_partition);
-	return ek_nand_partition;
-}
-
-static struct at91_nand_data __initdata ek_nand_data = {
-	.ale		= 22,
-	.cle		= 21,
-//	.det_pin	= ... not connected
-	.rdy_pin	= AT91_PIN_PC15,
-	.enable_pin	= AT91_PIN_PC14,
-	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
-	.bus_width_16	= 1,
-#else
-	.bus_width_16	= 0,
-#endif
-};
-
-/*
- * SPI devices
- */
-static struct spi_board_info ek_spi_devices[] = {
-	{	/* DataFlash chip */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
-	{	/* DataFlash card - jumper (J12) configurable to CS3 or CS0 */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 3,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-#elif defined(CONFIG_SND_AT73C213)
-	{	/* AT73C213 DAC */
-		.modalias	= "snd_at73c213",
-		.chip_select	= 3,
-		.max_speed_hz	= 10 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-#endif
-};
-
-
-static void __init ek_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* USB Host */
-	at91_add_device_usbh(&ek_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&ek_udc_data);
-	/* I2C */
-	at91_add_device_i2c();
-	/* NAND */
-	at91_add_device_nand(&ek_nand_data);
-	/* DM9000 ethernet */
-	ek_add_device_dm9000();
-
-	/* spi0 and mmc/sd share the same PIO pins */
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-	/* SPI */
-	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-#else
-	/* MMC */
-	at91_add_device_mmc(&ek_mmc_data);
-#endif
-}
-
-MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
-	/* Maintainer: Atmel */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
-	.timer		= &at91sam926x_timer,
-	.map_io		= ek_map_io,
-	.init_irq	= ek_init_irq,
-	.init_machine	= ek_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91rm9200/clock.c b/arch/arm/mach-at91rm9200/clock.c
deleted file mode 100644
index 4dee21f..0000000
--- a/arch/arm/mach-at91rm9200/clock.c
+++ /dev/null
@@ -1,644 +0,0 @@
-/*
- * linux/arch/arm/mach-at91rm9200/clock.c
- *
- * Copyright (C) 2005 David Brownell
- * Copyright (C) 2005 Ivan Kokshaysky
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-
-#include <asm/semaphore.h>
-#include <asm/io.h>
-#include <asm/mach-types.h>
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/cpu.h>
-
-#include "clock.h"
-
-
-/*
- * There's a lot more which can be done with clocks, including cpufreq
- * integration, slow clock mode support (for system suspend), letting
- * PLLB be used at other rates (on boards that don't need USB), etc.
- */
-
-#define clk_is_primary(x)	((x)->type & CLK_TYPE_PRIMARY)
-#define clk_is_programmable(x)	((x)->type & CLK_TYPE_PROGRAMMABLE)
-#define clk_is_peripheral(x)	((x)->type & CLK_TYPE_PERIPHERAL)
-#define clk_is_sys(x)		((x)->type & CLK_TYPE_SYSTEM)
-
-
-static LIST_HEAD(clocks);
-static DEFINE_SPINLOCK(clk_lock);
-
-static u32 at91_pllb_usb_init;
-
-/*
- * Four primary clock sources:  two crystal oscillators (32K, main), and
- * two PLLs.  PLLA usually runs the master clock; and PLLB must run at
- * 48 MHz (unless no USB function clocks are needed).  The main clock and
- * both PLLs are turned off to run in "slow clock mode" (system suspend).
- */
-static struct clk clk32k = {
-	.name		= "clk32k",
-	.rate_hz	= AT91_SLOW_CLOCK,
-	.users		= 1,		/* always on */
-	.id		= 0,
-	.type		= CLK_TYPE_PRIMARY,
-};
-static struct clk main_clk = {
-	.name		= "main",
-	.pmc_mask	= AT91_PMC_MOSCS,	/* in PMC_SR */
-	.id		= 1,
-	.type		= CLK_TYPE_PRIMARY,
-};
-static struct clk plla = {
-	.name		= "plla",
-	.parent		= &main_clk,
-	.pmc_mask	= AT91_PMC_LOCKA,	/* in PMC_SR */
-	.id		= 2,
-	.type		= CLK_TYPE_PRIMARY | CLK_TYPE_PLL,
-};
-
-static void pllb_mode(struct clk *clk, int is_on)
-{
-	u32	value;
-
-	if (is_on) {
-		is_on = AT91_PMC_LOCKB;
-		value = at91_pllb_usb_init;
-	} else
-		value = 0;
-
-	// REVISIT: Add work-around for AT91RM9200 Errata #26 ?
-	at91_sys_write(AT91_CKGR_PLLBR, value);
-
-	do {
-		cpu_relax();
-	} while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != is_on);
-}
-
-static struct clk pllb = {
-	.name		= "pllb",
-	.parent		= &main_clk,
-	.pmc_mask	= AT91_PMC_LOCKB,	/* in PMC_SR */
-	.mode		= pllb_mode,
-	.id		= 3,
-	.type		= CLK_TYPE_PRIMARY | CLK_TYPE_PLL,
-};
-
-static void pmc_sys_mode(struct clk *clk, int is_on)
-{
-	if (is_on)
-		at91_sys_write(AT91_PMC_SCER, clk->pmc_mask);
-	else
-		at91_sys_write(AT91_PMC_SCDR, clk->pmc_mask);
-}
-
-/* USB function clocks (PLLB must be 48 MHz) */
-static struct clk udpck = {
-	.name		= "udpck",
-	.parent		= &pllb,
-	.mode		= pmc_sys_mode,
-};
-static struct clk uhpck = {
-	.name		= "uhpck",
-	.parent		= &pllb,
-	.mode		= pmc_sys_mode,
-};
-
-
-/*
- * The master clock is divided from the CPU clock (by 1-4).  It's used for
- * memory, interfaces to on-chip peripherals, the AIC, and sometimes more
- * (e.g baud rate generation).  It's sourced from one of the primary clocks.
- */
-static struct clk mck = {
-	.name		= "mck",
-	.pmc_mask	= AT91_PMC_MCKRDY,	/* in PMC_SR */
-};
-
-static void pmc_periph_mode(struct clk *clk, int is_on)
-{
-	if (is_on)
-		at91_sys_write(AT91_PMC_PCER, clk->pmc_mask);
-	else
-		at91_sys_write(AT91_PMC_PCDR, clk->pmc_mask);
-}
-
-static struct clk __init *at91_css_to_clk(unsigned long css)
-{
-	switch (css) {
-		case AT91_PMC_CSS_SLOW:
-			return &clk32k;
-		case AT91_PMC_CSS_MAIN:
-			return &main_clk;
-		case AT91_PMC_CSS_PLLA:
-			return &plla;
-		case AT91_PMC_CSS_PLLB:
-			return &pllb;
-	}
-
-	return NULL;
-}
-
-/*
- * Associate a particular clock with a function (eg, "uart") and device.
- * The drivers can then request the same 'function' with several different
- * devices and not care about which clock name to use.
- */
-void __init at91_clock_associate(const char *id, struct device *dev, const char *func)
-{
-	struct clk *clk = clk_get(NULL, id);
-
-	if (!dev || !clk || !IS_ERR(clk_get(dev, func)))
-		return;
-
-	clk->function = func;
-	clk->dev = dev;
-}
-
-/* clocks cannot be de-registered no refcounting necessary */
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	struct clk *clk;
-
-	list_for_each_entry(clk, &clocks, node) {
-		if (strcmp(id, clk->name) == 0)
-			return clk;
-		if (clk->function && (dev == clk->dev) && strcmp(id, clk->function) == 0)
-			return clk;
-	}
-
-	return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
-static void __clk_enable(struct clk *clk)
-{
-	if (clk->parent)
-		__clk_enable(clk->parent);
-	if (clk->users++ == 0 && clk->mode)
-		clk->mode(clk, 1);
-}
-
-int clk_enable(struct clk *clk)
-{
-	unsigned long	flags;
-
-	spin_lock_irqsave(&clk_lock, flags);
-	__clk_enable(clk);
-	spin_unlock_irqrestore(&clk_lock, flags);
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-static void __clk_disable(struct clk *clk)
-{
-	BUG_ON(clk->users == 0);
-	if (--clk->users == 0 && clk->mode)
-		clk->mode(clk, 0);
-	if (clk->parent)
-		__clk_disable(clk->parent);
-}
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long	flags;
-
-	spin_lock_irqsave(&clk_lock, flags);
-	__clk_disable(clk);
-	spin_unlock_irqrestore(&clk_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	unsigned long	flags;
-	unsigned long	rate;
-
-	spin_lock_irqsave(&clk_lock, flags);
-	for (;;) {
-		rate = clk->rate_hz;
-		if (rate || !clk->parent)
-			break;
-		clk = clk->parent;
-	}
-	spin_unlock_irqrestore(&clk_lock, flags);
-	return rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/*------------------------------------------------------------------------*/
-
-#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
-
-/*
- * For now, only the programmable clocks support reparenting (MCK could
- * do this too, with care) or rate changing (the PLLs could do this too,
- * ditto MCK but that's more for cpufreq).  Drivers may reparent to get
- * a better rate match; we don't.
- */
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long	flags;
-	unsigned	prescale;
-	unsigned long	actual;
-
-	if (!clk_is_programmable(clk))
-		return -EINVAL;
-	spin_lock_irqsave(&clk_lock, flags);
-
-	actual = clk->parent->rate_hz;
-	for (prescale = 0; prescale < 7; prescale++) {
-		if (actual && actual <= rate)
-			break;
-		actual >>= 1;
-	}
-
-	spin_unlock_irqrestore(&clk_lock, flags);
-	return (prescale < 7) ? actual : -ENOENT;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long	flags;
-	unsigned	prescale;
-	unsigned long	actual;
-
-	if (!clk_is_programmable(clk))
-		return -EINVAL;
-	if (clk->users)
-		return -EBUSY;
-	spin_lock_irqsave(&clk_lock, flags);
-
-	actual = clk->parent->rate_hz;
-	for (prescale = 0; prescale < 7; prescale++) {
-		if (actual && actual <= rate) {
-			u32	pckr;
-
-			pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
-			pckr &= AT91_PMC_CSS_PLLB;	/* clock selection */
-			pckr |= prescale << 2;
-			at91_sys_write(AT91_PMC_PCKR(clk->id), pckr);
-			clk->rate_hz = actual;
-			break;
-		}
-		actual >>= 1;
-	}
-
-	spin_unlock_irqrestore(&clk_lock, flags);
-	return (prescale < 7) ? actual : -ENOENT;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
-	return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	unsigned long	flags;
-
-	if (clk->users)
-		return -EBUSY;
-	if (!clk_is_primary(parent) || !clk_is_programmable(clk))
-		return -EINVAL;
-	spin_lock_irqsave(&clk_lock, flags);
-
-	clk->rate_hz = parent->rate_hz;
-	clk->parent = parent;
-	at91_sys_write(AT91_PMC_PCKR(clk->id), parent->id);
-
-	spin_unlock_irqrestore(&clk_lock, flags);
-	return 0;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-/* establish PCK0..PCK3 parentage and rate */
-static void init_programmable_clock(struct clk *clk)
-{
-	struct clk	*parent;
-	u32		pckr;
-
-	pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
-	parent = at91_css_to_clk(pckr & AT91_PMC_CSS);
-	clk->parent = parent;
-	clk->rate_hz = parent->rate_hz / (1 << ((pckr >> 2) & 3));
-}
-
-#endif	/* CONFIG_AT91_PROGRAMMABLE_CLOCKS */
-
-/*------------------------------------------------------------------------*/
-
-#ifdef CONFIG_DEBUG_FS
-
-static int at91_clk_show(struct seq_file *s, void *unused)
-{
-	u32		scsr, pcsr, sr;
-	struct clk	*clk;
-	unsigned	i;
-
-	seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR));
-	seq_printf(s, "PCSR = %8x\n", pcsr = at91_sys_read(AT91_PMC_PCSR));
-
-	seq_printf(s, "MOR  = %8x\n", at91_sys_read(AT91_CKGR_MOR));
-	seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR));
-	seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
-	seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
-
-	seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
-	for (i = 0; i < 4; i++)
-		seq_printf(s, "PCK%d = %8x\n", i, at91_sys_read(AT91_PMC_PCKR(i)));
-	seq_printf(s, "SR   = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
-
-	seq_printf(s, "\n");
-
-	list_for_each_entry(clk, &clocks, node) {
-		char	*state;
-
-		if (clk->mode == pmc_sys_mode)
-			state = (scsr & clk->pmc_mask) ? "on" : "off";
-		else if (clk->mode == pmc_periph_mode)
-			state = (pcsr & clk->pmc_mask) ? "on" : "off";
-		else if (clk->pmc_mask)
-			state = (sr & clk->pmc_mask) ? "on" : "off";
-		else if (clk == &clk32k || clk == &main_clk)
-			state = "on";
-		else
-			state = "";
-
-		seq_printf(s, "%-10s users=%2d %-3s %9ld Hz %s\n",
-			clk->name, clk->users, state, clk_get_rate(clk),
-			clk->parent ? clk->parent->name : "");
-	}
-	return 0;
-}
-
-static int at91_clk_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, at91_clk_show, NULL);
-}
-
-static struct file_operations at91_clk_operations = {
-	.open		= at91_clk_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int __init at91_clk_debugfs_init(void)
-{
-	/* /sys/kernel/debug/at91_clk */
-	(void) debugfs_create_file("at91_clk", S_IFREG | S_IRUGO, NULL, NULL, &at91_clk_operations);
-
-	return 0;
-}
-postcore_initcall(at91_clk_debugfs_init);
-
-#endif
-
-/*------------------------------------------------------------------------*/
-
-/* Register a new clock */
-int __init clk_register(struct clk *clk)
-{
-	if (clk_is_peripheral(clk)) {
-		clk->parent = &mck;
-		clk->mode = pmc_periph_mode;
-		list_add_tail(&clk->node, &clocks);
-	}
-	else if (clk_is_sys(clk)) {
-		clk->parent = &mck;
-		clk->mode = pmc_sys_mode;
-
-		list_add_tail(&clk->node, &clocks);
-	}
-#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
-	else if (clk_is_programmable(clk)) {
-		clk->mode = pmc_sys_mode;
-		init_programmable_clock(clk);
-		list_add_tail(&clk->node, &clocks);
-	}
-#endif
-
-	return 0;
-}
-
-
-/*------------------------------------------------------------------------*/
-
-static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg)
-{
-	unsigned mul, div;
-
-	div = reg & 0xff;
-	mul = (reg >> 16) & 0x7ff;
-	if (div && mul) {
-		freq /= div;
-		freq *= mul + 1;
-	} else
-		freq = 0;
-
-	return freq;
-}
-
-static u32 __init at91_usb_rate(struct clk *pll, u32 freq, u32 reg)
-{
-	if (pll == &pllb && (reg & AT91_PMC_USB96M))
-		return freq / 2;
-	else
-		return freq;
-}
-
-static unsigned __init at91_pll_calc(unsigned main_freq, unsigned out_freq)
-{
-	unsigned i, div = 0, mul = 0, diff = 1 << 30;
-	unsigned ret = (out_freq > 155000000) ? 0xbe00 : 0x3e00;
-
-	/* PLL output max 240 MHz (or 180 MHz per errata) */
-	if (out_freq > 240000000)
-		goto fail;
-
-	for (i = 1; i < 256; i++) {
-		int diff1;
-		unsigned input, mul1;
-
-		/*
-		 * PLL input between 1MHz and 32MHz per spec, but lower
-		 * frequences seem necessary in some cases so allow 100K.
-		 */
-		input = main_freq / i;
-		if (input < 100000)
-			continue;
-		if (input > 32000000)
-			continue;
-
-		mul1 = out_freq / input;
-		if (mul1 > 2048)
-			continue;
-		if (mul1 < 2)
-			goto fail;
-
-		diff1 = out_freq - input * mul1;
-		if (diff1 < 0)
-			diff1 = -diff1;
-		if (diff > diff1) {
-			diff = diff1;
-			div = i;
-			mul = mul1;
-			if (diff == 0)
-				break;
-		}
-	}
-	if (i == 256 && diff > (out_freq >> 5))
-		goto fail;
-	return ret | ((mul - 1) << 16) | div;
-fail:
-	return 0;
-}
-
-/*
- * Several unused clocks may be active.  Turn them off.
- */
-static void __init at91_periphclk_reset(void)
-{
-	unsigned long reg;
-	struct clk *clk;
-
-	reg = at91_sys_read(AT91_PMC_PCSR);
-
-	list_for_each_entry(clk, &clocks, node) {
-		if (clk->mode != pmc_periph_mode)
-			continue;
-
-		if (clk->users > 0)
-			reg &= ~clk->pmc_mask;
-	}
-
-	at91_sys_write(AT91_PMC_PCDR, reg);
-}
-
-static struct clk *const standard_pmc_clocks[] __initdata = {
-	/* four primary clocks */
-	&clk32k,
-	&main_clk,
-	&plla,
-	&pllb,
-
-	/* PLLB children (USB) */
-	&udpck,
-	&uhpck,
-
-	/* MCK */
-	&mck
-};
-
-int __init at91_clock_init(unsigned long main_clock)
-{
-	unsigned tmp, freq, mckr;
-	int i;
-
-	/*
-	 * When the bootloader initialized the main oscillator correctly,
-	 * there's no problem using the cycle counter.  But if it didn't,
-	 * or when using oscillator bypass mode, we must be told the speed
-	 * of the main clock.
-	 */
-	if (!main_clock) {
-		do {
-			tmp = at91_sys_read(AT91_CKGR_MCFR);
-		} while (!(tmp & AT91_PMC_MAINRDY));
-		main_clock = (tmp & AT91_PMC_MAINF) * (AT91_SLOW_CLOCK / 16);
-	}
-	main_clk.rate_hz = main_clock;
-
-	/* report if PLLA is more than mildly overclocked */
-	plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
-	if (plla.rate_hz > 209000000)
-		pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
-
-	/*
-	 * USB clock init:  choose 48 MHz PLLB value, turn all clocks off,
-	 * disable 48MHz clock during usb peripheral suspend.
-	 *
-	 * REVISIT:  assumes MCK doesn't derive from PLLB!
-	 */
-	at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
-	pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
-	if (cpu_is_at91rm9200()) {
-		uhpck.pmc_mask = AT91RM9200_PMC_UHP;
-		udpck.pmc_mask = AT91RM9200_PMC_UDP;
-		at91_sys_write(AT91_PMC_SCDR, AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP);
-		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
-	} else if (cpu_is_at91sam9260()) {
-		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
-		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
-		at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP);
-	} else if (cpu_is_at91sam9261()) {
-		uhpck.pmc_mask = (AT91SAM926x_PMC_UHP | AT91_PMC_HCK0);
-		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
-		at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91_PMC_HCK0 | AT91SAM926x_PMC_UDP);
-	}
-	at91_sys_write(AT91_CKGR_PLLBR, 0);
-
-	udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
-	uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
-
-	/*
-	 * MCK and CPU derive from one of those primary clocks.
-	 * For now, assume this parentage won't change.
-	 */
-	mckr = at91_sys_read(AT91_PMC_MCKR);
-	mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS);
-	freq = mck.parent->rate_hz;
-	freq /= (1 << ((mckr >> 2) & 3));		/* prescale */
-	mck.rate_hz = freq / (1 + ((mckr >> 8) & 3));	/* mdiv */
-
-	/* Register the PMC's standard clocks */
-	for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
-		list_add_tail(&standard_pmc_clocks[i]->node, &clocks);
-
-	/* MCK and CPU clock are "always on" */
-	clk_enable(&mck);
-
-	printk("Clocks: CPU %u MHz, master %u MHz, main %u.%03u MHz\n",
-		freq / 1000000, (unsigned) mck.rate_hz / 1000000,
-		(unsigned) main_clock / 1000000,
-		((unsigned) main_clock % 1000000) / 1000);
-
-	/* disable all programmable clocks */
-	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK0 | AT91_PMC_PCK1 | AT91_PMC_PCK2 | AT91_PMC_PCK3);
-
-	/* disable all other unused peripheral clocks */
-	at91_periphclk_reset();
-
-	return 0;
-}
diff --git a/arch/arm/mach-at91rm9200/clock.h b/arch/arm/mach-at91rm9200/clock.h
deleted file mode 100644
index b5c7a2e..0000000
--- a/arch/arm/mach-at91rm9200/clock.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * linux/arch/arm/mach-at91rm9200/clock.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define CLK_TYPE_PRIMARY	0x1
-#define CLK_TYPE_PLL		0x2
-#define CLK_TYPE_PROGRAMMABLE	0x4
-#define CLK_TYPE_PERIPHERAL	0x8
-#define CLK_TYPE_SYSTEM		0x10
-
-
-struct clk {
-	struct list_head node;
-	const char	*name;		/* unique clock name */
-	const char	*function;	/* function of the clock */
-	struct device	*dev;		/* device associated with function */
-	unsigned long	rate_hz;
-	struct clk	*parent;
-	u32		pmc_mask;
-	void		(*mode)(struct clk *, int);
-	unsigned	id:2;		/* PCK0..3, or 32k/main/a/b */
-	unsigned	type;		/* clock type */
-	u16		users;
-};
-
-
-extern int __init clk_register(struct clk *clk);
diff --git a/arch/arm/mach-at91rm9200/generic.h b/arch/arm/mach-at91rm9200/generic.h
deleted file mode 100644
index 8c4d5a7..0000000
--- a/arch/arm/mach-at91rm9200/generic.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * linux/arch/arm/mach-at91rm9200/generic.h
- *
- *  Copyright (C) 2005 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
- /* Processors */
-extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks);
-extern void __init at91sam9260_initialize(unsigned long main_clock);
-extern void __init at91sam9261_initialize(unsigned long main_clock);
-
- /* Interrupts */
-extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
-extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
-extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
-extern void __init at91_aic_init(unsigned int priority[]);
-
- /* Timer */
-struct sys_timer;
-extern struct sys_timer at91rm9200_timer;
-extern struct sys_timer at91sam926x_timer;
-
- /* Clocks */
-extern int __init at91_clock_init(unsigned long main_clock);
-struct device;
-extern void __init at91_clock_associate(const char *id, struct device *dev, const char *func);
-
- /* Power Management */
-extern void at91_irq_suspend(void);
-extern void at91_irq_resume(void);
-
- /* GPIO */
-#define AT91RM9200_PQFP		3	/* AT91RM9200 PQFP package has 3 banks */
-#define AT91RM9200_BGA		4	/* AT91RM9200 BGA package has 4 banks */
-
-struct at91_gpio_bank {
-	unsigned short id;		/* peripheral ID */
-	unsigned long offset;		/* offset from system peripheral base */
-	struct clk *clock;		/* associated clock */
-};
-extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks);
-extern void __init at91_gpio_irq_setup(void);
-
-extern void (*at91_arch_reset)(void);
-extern int at91_extern_irq;
diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c
deleted file mode 100644
index af22659..0000000
--- a/arch/arm/mach-at91rm9200/gpio.c
+++ /dev/null
@@ -1,414 +0,0 @@
-/*
- * linux/arch/arm/mach-at91rm9200/gpio.c
- *
- * Copyright (C) 2005 HP Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/clk.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/module.h>
-
-#include <asm/io.h>
-#include <asm/hardware.h>
-#include <asm/arch/at91_pio.h>
-#include <asm/arch/gpio.h>
-
-#include "generic.h"
-
-
-static struct at91_gpio_bank *gpio;
-static int gpio_banks;
-
-
-static inline void __iomem *pin_to_controller(unsigned pin)
-{
-	void __iomem *sys_base = (void __iomem *) AT91_VA_BASE_SYS;
-
-	pin -= PIN_BASE;
-	pin /= 32;
-	if (likely(pin < gpio_banks))
-		return sys_base + gpio[pin].offset;
-
-	return NULL;
-}
-
-static inline unsigned pin_to_mask(unsigned pin)
-{
-	pin -= PIN_BASE;
-	return 1 << (pin % 32);
-}
-
-
-/*--------------------------------------------------------------------------*/
-
-/* Not all hardware capabilities are exposed through these calls; they
- * only encapsulate the most common features and modes.  (So if you
- * want to change signals in groups, do it directly.)
- *
- * Bootloaders will usually handle some of the pin multiplexing setup.
- * The intent is certainly that by the time Linux is fully booted, all
- * pins should have been fully initialized.  These setup calls should
- * only be used by board setup routines, or possibly in driver probe().
- *
- * For bootloaders doing all that setup, these calls could be inlined
- * as NOPs so Linux won't duplicate any setup code
- */
-
-
-/*
- * mux the pin to the "A" internal peripheral role.
- */
-int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup)
-{
-	void __iomem	*pio = pin_to_controller(pin);
-	unsigned	mask = pin_to_mask(pin);
-
-	if (!pio)
-		return -EINVAL;
-
-	__raw_writel(mask, pio + PIO_IDR);
-	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
-	__raw_writel(mask, pio + PIO_ASR);
-	__raw_writel(mask, pio + PIO_PDR);
-	return 0;
-}
-EXPORT_SYMBOL(at91_set_A_periph);
-
-
-/*
- * mux the pin to the "B" internal peripheral role.
- */
-int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup)
-{
-	void __iomem	*pio = pin_to_controller(pin);
-	unsigned	mask = pin_to_mask(pin);
-
-	if (!pio)
-		return -EINVAL;
-
-	__raw_writel(mask, pio + PIO_IDR);
-	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
-	__raw_writel(mask, pio + PIO_BSR);
-	__raw_writel(mask, pio + PIO_PDR);
-	return 0;
-}
-EXPORT_SYMBOL(at91_set_B_periph);
-
-
-/*
- * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and
- * configure it for an input.
- */
-int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup)
-{
-	void __iomem	*pio = pin_to_controller(pin);
-	unsigned	mask = pin_to_mask(pin);
-
-	if (!pio)
-		return -EINVAL;
-
-	__raw_writel(mask, pio + PIO_IDR);
-	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
-	__raw_writel(mask, pio + PIO_ODR);
-	__raw_writel(mask, pio + PIO_PER);
-	return 0;
-}
-EXPORT_SYMBOL(at91_set_gpio_input);
-
-
-/*
- * mux the pin to the gpio controller (instead of "A" or "B" peripheral),
- * and configure it for an output.
- */
-int __init_or_module at91_set_gpio_output(unsigned pin, int value)
-{
-	void __iomem	*pio = pin_to_controller(pin);
-	unsigned	mask = pin_to_mask(pin);
-
-	if (!pio)
-		return -EINVAL;
-
-	__raw_writel(mask, pio + PIO_IDR);
-	__raw_writel(mask, pio + PIO_PUDR);
-	__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
-	__raw_writel(mask, pio + PIO_OER);
-	__raw_writel(mask, pio + PIO_PER);
-	return 0;
-}
-EXPORT_SYMBOL(at91_set_gpio_output);
-
-
-/*
- * enable/disable the glitch filter; mostly used with IRQ handling.
- */
-int __init_or_module at91_set_deglitch(unsigned pin, int is_on)
-{
-	void __iomem	*pio = pin_to_controller(pin);
-	unsigned	mask = pin_to_mask(pin);
-
-	if (!pio)
-		return -EINVAL;
-	__raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR));
-	return 0;
-}
-EXPORT_SYMBOL(at91_set_deglitch);
-
-/*
- * enable/disable the multi-driver; This is only valid for output and
- * allows the output pin to run as an open collector output.
- */
-int __init_or_module at91_set_multi_drive(unsigned pin, int is_on)
-{
-	void __iomem	*pio = pin_to_controller(pin);
-	unsigned	mask = pin_to_mask(pin);
-
-	if (!pio)
-		return -EINVAL;
-
-	__raw_writel(mask, pio + (is_on ? PIO_MDER : PIO_MDDR));
-	return 0;
-}
-EXPORT_SYMBOL(at91_set_multi_drive);
-
-/*--------------------------------------------------------------------------*/
-
-/*
- * assuming the pin is muxed as a gpio output, set its value.
- */
-int at91_set_gpio_value(unsigned pin, int value)
-{
-	void __iomem	*pio = pin_to_controller(pin);
-	unsigned	mask = pin_to_mask(pin);
-
-	if (!pio)
-		return -EINVAL;
-	__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
-	return 0;
-}
-EXPORT_SYMBOL(at91_set_gpio_value);
-
-
-/*
- * read the pin's value (works even if it's not muxed as a gpio).
- */
-int at91_get_gpio_value(unsigned pin)
-{
-	void __iomem	*pio = pin_to_controller(pin);
-	unsigned	mask = pin_to_mask(pin);
-	u32		pdsr;
-
-	if (!pio)
-		return -EINVAL;
-	pdsr = __raw_readl(pio + PIO_PDSR);
-	return (pdsr & mask) != 0;
-}
-EXPORT_SYMBOL(at91_get_gpio_value);
-
-/*--------------------------------------------------------------------------*/
-
-#ifdef CONFIG_PM
-
-static u32 wakeups[MAX_GPIO_BANKS];
-static u32 backups[MAX_GPIO_BANKS];
-
-static int gpio_irq_set_wake(unsigned pin, unsigned state)
-{
-	unsigned	mask = pin_to_mask(pin);
-	unsigned	bank = (pin - PIN_BASE) / 32;
-
-	if (unlikely(bank >= MAX_GPIO_BANKS))
-		return -EINVAL;
-
-	if (state)
-		wakeups[bank] |= mask;
-	else
-		wakeups[bank] &= ~mask;
-
-	set_irq_wake(gpio[bank].id, state);
-
-	return 0;
-}
-
-void at91_gpio_suspend(void)
-{
-	int i;
-
-	for (i = 0; i < gpio_banks; i++) {
-		u32 pio = gpio[i].offset;
-
-		backups[i] = at91_sys_read(pio + PIO_IMR);
-		at91_sys_write(pio + PIO_IDR, backups[i]);
-		at91_sys_write(pio + PIO_IER, wakeups[i]);
-
-		if (!wakeups[i])
-			clk_disable(gpio[i].clock);
-		else {
-#ifdef CONFIG_PM_DEBUG
-			printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]);
-#endif
-		}
-	}
-}
-
-void at91_gpio_resume(void)
-{
-	int i;
-
-	for (i = 0; i < gpio_banks; i++) {
-		u32 pio = gpio[i].offset;
-
-		if (!wakeups[i])
-			clk_enable(gpio[i].clock);
-
-		at91_sys_write(pio + PIO_IDR, wakeups[i]);
-		at91_sys_write(pio + PIO_IER, backups[i]);
-	}
-}
-
-#else
-#define gpio_irq_set_wake	NULL
-#endif
-
-
-/* Several AIC controller irqs are dispatched through this GPIO handler.
- * To use any AT91_PIN_* as an externally triggered IRQ, first call
- * at91_set_gpio_input() then maybe enable its glitch filter.
- * Then just request_irq() with the pin ID; it works like any ARM IRQ
- * handler, though it always triggers on rising and falling edges.
- *
- * Alternatively, certain pins may be used directly as IRQ0..IRQ6 after
- * configuring them with at91_set_a_periph() or at91_set_b_periph().
- * IRQ0..IRQ6 should be configurable, e.g. level vs edge triggering.
- */
-
-static void gpio_irq_mask(unsigned pin)
-{
-	void __iomem	*pio = pin_to_controller(pin);
-	unsigned	mask = pin_to_mask(pin);
-
-	if (pio)
-		__raw_writel(mask, pio + PIO_IDR);
-}
-
-static void gpio_irq_unmask(unsigned pin)
-{
-	void __iomem	*pio = pin_to_controller(pin);
-	unsigned	mask = pin_to_mask(pin);
-
-	if (pio)
-		__raw_writel(mask, pio + PIO_IER);
-}
-
-static int gpio_irq_type(unsigned pin, unsigned type)
-{
-	return (type == IRQT_BOTHEDGE) ? 0 : -EINVAL;
-}
-
-static struct irq_chip gpio_irqchip = {
-	.name		= "GPIO",
-	.mask		= gpio_irq_mask,
-	.unmask		= gpio_irq_unmask,
-	.set_type	= gpio_irq_type,
-	.set_wake	= gpio_irq_set_wake,
-};
-
-static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
-{
-	unsigned	pin;
-	struct irq_desc	*gpio;
-	void __iomem	*pio;
-	u32		isr;
-
-	pio = get_irq_chip_data(irq);
-
-	/* temporarily mask (level sensitive) parent IRQ */
-	desc->chip->ack(irq);
-	for (;;) {
-		/* reading ISR acks the pending (edge triggered) GPIO interrupt */
-		isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR);
-		if (!isr)
-			break;
-
-		pin = (unsigned) get_irq_data(irq);
-		gpio = &irq_desc[pin];
-
-		while (isr) {
-			if (isr & 1) {
-				if (unlikely(gpio->depth)) {
-					/*
-					 * The core ARM interrupt handler lazily disables IRQs so
-					 * another IRQ must be generated before it actually gets
-					 * here to be disabled on the GPIO controller.
-					 */
-					gpio_irq_mask(pin);
-				}
-				else
-					desc_handle_irq(pin, gpio);
-			}
-			pin++;
-			gpio++;
-			isr >>= 1;
-		}
-	}
-	desc->chip->unmask(irq);
-	/* now it may re-trigger */
-}
-
-/*--------------------------------------------------------------------------*/
-
-/*
- * Called from the processor-specific init to enable GPIO interrupt support.
- */
-void __init at91_gpio_irq_setup(void)
-{
-	unsigned	pioc, pin;
-
-	for (pioc = 0, pin = PIN_BASE;
-			pioc < gpio_banks;
-			pioc++) {
-		void __iomem	*controller;
-		unsigned	id = gpio[pioc].id;
-		unsigned	i;
-
-		clk_enable(gpio[pioc].clock);	/* enable PIO controller's clock */
-
-		controller = (void __iomem *) AT91_VA_BASE_SYS + gpio[pioc].offset;
-		__raw_writel(~0, controller + PIO_IDR);
-
-		set_irq_data(id, (void *) pin);
-		set_irq_chip_data(id, controller);
-
-		for (i = 0; i < 32; i++, pin++) {
-			/*
-			 * Can use the "simple" and not "edge" handler since it's
-			 * shorter, and the AIC handles interupts sanely.
-			 */
-			set_irq_chip(pin, &gpio_irqchip);
-			set_irq_handler(pin, handle_simple_irq);
-			set_irq_flags(pin, IRQF_VALID);
-		}
-
-		set_irq_chained_handler(id, gpio_irq_handler);
-	}
-	pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks);
-}
-
-/*
- * Called from the processor-specific init to enable GPIO pin support.
- */
-void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
-{
-	BUG_ON(nr_banks > MAX_GPIO_BANKS);
-
-	gpio = data;
-	gpio_banks = nr_banks;
-}
diff --git a/arch/arm/mach-at91rm9200/irq.c b/arch/arm/mach-at91rm9200/irq.c
deleted file mode 100644
index 2148daaf..0000000
--- a/arch/arm/mach-at91rm9200/irq.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * linux/arch/arm/mach-at91rm9200/irq.c
- *
- *  Copyright (C) 2004 SAN People
- *  Copyright (C) 2004 ATMEL
- *  Copyright (C) Rick Bronson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/types.h>
-
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/setup.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-
-static void at91_aic_mask_irq(unsigned int irq)
-{
-	/* Disable interrupt on AIC */
-	at91_sys_write(AT91_AIC_IDCR, 1 << irq);
-}
-
-static void at91_aic_unmask_irq(unsigned int irq)
-{
-	/* Enable interrupt on AIC */
-	at91_sys_write(AT91_AIC_IECR, 1 << irq);
-}
-
-unsigned int at91_extern_irq;
-
-#define is_extern_irq(irq) ((1 << (irq)) & at91_extern_irq)
-
-static int at91_aic_set_type(unsigned irq, unsigned type)
-{
-	unsigned int smr, srctype;
-
-	switch (type) {
-	case IRQT_HIGH:
-		srctype = AT91_AIC_SRCTYPE_HIGH;
-		break;
-	case IRQT_RISING:
-		srctype = AT91_AIC_SRCTYPE_RISING;
-		break;
-	case IRQT_LOW:
-		if ((irq == AT91_ID_FIQ) || is_extern_irq(irq))		/* only supported on external interrupts */
-			srctype = AT91_AIC_SRCTYPE_LOW;
-		else
-			return -EINVAL;
-		break;
-	case IRQT_FALLING:
-		if ((irq == AT91_ID_FIQ) || is_extern_irq(irq))		/* only supported on external interrupts */
-			srctype = AT91_AIC_SRCTYPE_FALLING;
-		else
-			return -EINVAL;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	smr = at91_sys_read(AT91_AIC_SMR(irq)) & ~AT91_AIC_SRCTYPE;
-	at91_sys_write(AT91_AIC_SMR(irq), smr | srctype);
-	return 0;
-}
-
-#ifdef CONFIG_PM
-
-static u32 wakeups;
-static u32 backups;
-
-static int at91_aic_set_wake(unsigned irq, unsigned value)
-{
-	if (unlikely(irq >= 32))
-		return -EINVAL;
-
-	if (value)
-		wakeups |= (1 << irq);
-	else
-		wakeups &= ~(1 << irq);
-
-	return 0;
-}
-
-void at91_irq_suspend(void)
-{
-	backups = at91_sys_read(AT91_AIC_IMR);
-	at91_sys_write(AT91_AIC_IDCR, backups);
-	at91_sys_write(AT91_AIC_IECR, wakeups);
-}
-
-void at91_irq_resume(void)
-{
-	at91_sys_write(AT91_AIC_IDCR, wakeups);
-	at91_sys_write(AT91_AIC_IECR, backups);
-}
-
-#else
-#define at91_aic_set_wake	NULL
-#endif
-
-static struct irq_chip at91_aic_chip = {
-	.name		= "AIC",
-	.ack		= at91_aic_mask_irq,
-	.mask		= at91_aic_mask_irq,
-	.unmask		= at91_aic_unmask_irq,
-	.set_type	= at91_aic_set_type,
-	.set_wake	= at91_aic_set_wake,
-};
-
-/*
- * Initialize the AIC interrupt controller.
- */
-void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS])
-{
-	unsigned int i;
-
-	/*
-	 * The IVR is used by macro get_irqnr_and_base to read and verify.
-	 * The irq number is NR_AIC_IRQS when a spurious interrupt has occurred.
-	 */
-	for (i = 0; i < NR_AIC_IRQS; i++) {
-		/* Put irq number in Source Vector Register: */
-		at91_sys_write(AT91_AIC_SVR(i), i);
-		/* Active Low interrupt, with the specified priority */
-		at91_sys_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);
-
-		set_irq_chip(i, &at91_aic_chip);
-		set_irq_handler(i, handle_level_irq);
-		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-
-		/* Perform 8 End Of Interrupt Command to make sure AIC will not Lock out nIRQ */
-		if (i < 8)
-			at91_sys_write(AT91_AIC_EOICR, 0);
-	}
-
-	/*
-	 * Spurious Interrupt ID in Spurious Vector Register is NR_AIC_IRQS
-	 * When there is no current interrupt, the IRQ Vector Register reads the value stored in AIC_SPU
-	 */
-	at91_sys_write(AT91_AIC_SPU, NR_AIC_IRQS);
-
-	/* No debugging in AIC: Debug (Protect) Control Register */
-	at91_sys_write(AT91_AIC_DCR, 0);
-
-	/* Disable and clear all interrupts initially */
-	at91_sys_write(AT91_AIC_IDCR, 0xFFFFFFFF);
-	at91_sys_write(AT91_AIC_ICCR, 0xFFFFFFFF);
-}
diff --git a/arch/arm/mach-at91rm9200/leds.c b/arch/arm/mach-at91rm9200/leds.c
deleted file mode 100644
index 1a33373..0000000
--- a/arch/arm/mach-at91rm9200/leds.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * LED driver for Atmel AT91-based boards.
- *
- *  Copyright (C) SAN People (Pty) Ltd
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <asm/mach-types.h>
-#include <asm/leds.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-
-
-static inline void at91_led_on(unsigned int led)
-{
-	at91_set_gpio_value(led, 0);
-}
-
-static inline void at91_led_off(unsigned int led)
-{
-	at91_set_gpio_value(led, 1);
-}
-
-static inline void at91_led_toggle(unsigned int led)
-{
-	unsigned long is_off = at91_get_gpio_value(led);
-	if (is_off)
-		at91_led_on(led);
-	else
-		at91_led_off(led);
-}
-
-
-/*
- * Handle LED events.
- */
-static void at91_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch(evt) {
-	case led_start:		/* System startup */
-		at91_led_on(at91_leds_cpu);
-		break;
-
-	case led_stop:		/* System stop / suspend */
-		at91_led_off(at91_leds_cpu);
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:		/* Every 50 timer ticks */
-		at91_led_toggle(at91_leds_timer);
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:	/* Entering idle state */
-		at91_led_off(at91_leds_cpu);
-		break;
-
-	case led_idle_end:	/* Exit idle state */
-		at91_led_on(at91_leds_cpu);
-		break;
-#endif
-
-	default:
-		break;
-	}
-
-	local_irq_restore(flags);
-}
-
-
-static int __init leds_init(void)
-{
-	if (!at91_leds_timer || !at91_leds_cpu)
-		return -ENODEV;
-
-	/* Enable PIO to access the LEDs */
-	at91_set_gpio_output(at91_leds_timer, 1);
-	at91_set_gpio_output(at91_leds_cpu, 1);
-
-	leds_event = at91_leds_event;
-
-	leds_event(led_start);
-	return 0;
-}
-
-__initcall(leds_init);
diff --git a/arch/arm/mach-at91rm9200/pm.c b/arch/arm/mach-at91rm9200/pm.c
deleted file mode 100644
index 67aa557..0000000
--- a/arch/arm/mach-at91rm9200/pm.c
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- * arch/arm/mach-at91rm9200/pm.c
- * AT91 Power Management
- *
- * Copyright (C) 2005 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/pm.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/pm.h>
-#include <linux/interrupt.h>
-#include <linux/sysfs.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/atomic.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91rm9200_mc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/cpu.h>
-
-#include "generic.h"
-
-
-static int at91_pm_valid_state(suspend_state_t state)
-{
-	switch (state) {
-		case PM_SUSPEND_ON:
-		case PM_SUSPEND_STANDBY:
-		case PM_SUSPEND_MEM:
-			return 1;
-
-		default:
-			return 0;
-	}
-}
-
-
-static suspend_state_t target_state;
-
-/*
- * Called after processes are frozen, but before we shutdown devices.
- */
-static int at91_pm_prepare(suspend_state_t state)
-{
-	target_state = state;
-	return 0;
-}
-
-/*
- * Verify that all the clocks are correct before entering
- * slow-clock mode.
- */
-static int at91_pm_verify_clocks(void)
-{
-	unsigned long scsr;
-	int i;
-
-	scsr = at91_sys_read(AT91_PMC_SCSR);
-
-	/* USB must not be using PLLB */
-	if (cpu_is_at91rm9200()) {
-		if ((scsr & (AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP)) != 0) {
-			pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
-			return 0;
-		}
-	} else if (cpu_is_at91sam9260()) {
-#warning "Check SAM9260 USB clocks"
-	} else if (cpu_is_at91sam9261()) {
-#warning "Check SAM9261 USB clocks"
-	}
-
-#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
-	/* PCK0..PCK3 must be disabled, or configured to use clk32k */
-	for (i = 0; i < 4; i++) {
-		u32 css;
-
-		if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
-			continue;
-
-		css = at91_sys_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
-		if (css != AT91_PMC_CSS_SLOW) {
-			pr_debug("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
-			return 0;
-		}
-	}
-#endif
-
-	return 1;
-}
-
-/*
- * Call this from platform driver suspend() to see how deeply to suspend.
- * For example, some controllers (like OHCI) need one of the PLL clocks
- * in order to act as a wakeup source, and those are not available when
- * going into slow clock mode.
- *
- * REVISIT: generalize as clk_will_be_available(clk)?  Other platforms have
- * the very same problem (but not using at91 main_clk), and it'd be better
- * to add one generic API rather than lots of platform-specific ones.
- */
-int at91_suspend_entering_slow_clock(void)
-{
-	return (target_state == PM_SUSPEND_MEM);
-}
-EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
-
-
-static void (*slow_clock)(void);
-
-
-static int at91_pm_enter(suspend_state_t state)
-{
-	at91_gpio_suspend();
-	at91_irq_suspend();
-
-	pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
-			/* remember all the always-wake irqs */
-			(at91_sys_read(AT91_PMC_PCSR)
-					| (1 << AT91_ID_FIQ)
-					| (1 << AT91_ID_SYS)
-					| (at91_extern_irq))
-				& at91_sys_read(AT91_AIC_IMR),
-			state);
-
-	switch (state) {
-		/*
-		 * Suspend-to-RAM is like STANDBY plus slow clock mode, so
-		 * drivers must suspend more deeply:  only the master clock
-		 * controller may be using the main oscillator.
-		 */
-		case PM_SUSPEND_MEM:
-			/*
-			 * Ensure that clocks are in a valid state.
-			 */
-			if (!at91_pm_verify_clocks())
-				goto error;
-
-			/*
-			 * Enter slow clock mode by switching over to clk32k and
-			 * turning off the main oscillator; reverse on wakeup.
-			 */
-			if (slow_clock) {
-				slow_clock();
-				break;
-			} else {
-				/* DEVELOPMENT ONLY */
-				pr_info("AT91: PM - no slow clock mode yet ...\n");
-				/* FALLTHROUGH leaving master clock alone */
-			}
-
-		/*
-		 * STANDBY mode has *all* drivers suspended; ignores irqs not
-		 * marked as 'wakeup' event sources; and reduces DRAM power.
-		 * But otherwise it's identical to PM_SUSPEND_ON:  cpu idle, and
-		 * nothing fancy done with main or cpu clocks.
-		 */
-		case PM_SUSPEND_STANDBY:
-			/*
-			 * NOTE: the Wait-for-Interrupt instruction needs to be
-			 * in icache so the SDRAM stays in self-refresh mode until
-			 * the wakeup IRQ occurs.
-			 */
-			asm("b 1f; .align 5; 1:");
-			asm("mcr p15, 0, r0, c7, c10, 4");	/* drain write buffer */
-			at91_sys_write(AT91_SDRAMC_SRR, 1);	/* self-refresh mode */
-			/* fall though to next state */
-
-		case PM_SUSPEND_ON:
-			asm("mcr p15, 0, r0, c7, c0, 4");	/* wait for interrupt */
-			break;
-
-		default:
-			pr_debug("AT91: PM - bogus suspend state %d\n", state);
-			goto error;
-	}
-
-	pr_debug("AT91: PM - wakeup %08x\n",
-			at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));
-
-error:
-	target_state = PM_SUSPEND_ON;
-	at91_irq_resume();
-	at91_gpio_resume();
-	return 0;
-}
-
-
-static struct pm_ops at91_pm_ops ={
-	.pm_disk_mode	= 0,
-	.valid		= at91_pm_valid_state,
-	.prepare	= at91_pm_prepare,
-	.enter		= at91_pm_enter,
-};
-
-static int __init at91_pm_init(void)
-{
-	printk("AT91: Power Management\n");
-
-#ifdef CONFIG_AT91_PM_SLOW_CLOCK
-	/* REVISIT allocations of SRAM should be dynamically managed.
-	 * FIQ handlers and other components will want SRAM/TCM too...
-	 */
-	slow_clock = (void *) (AT91_VA_BASE_SRAM + (3 * SZ_4K));
-	memcpy(slow_clock, at91rm9200_slow_clock, at91rm9200_slow_clock_sz);
-#endif
-
-	/* Disable SDRAM low-power mode.  Cannot be used with self-refresh. */
-	at91_sys_write(AT91_SDRAMC_LPR, 0);
-
-	pm_set_ops(&at91_pm_ops);
-
-	return 0;
-}
-arch_initcall(at91_pm_init);
diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c
index 3d0d109..ecbd4a2 100644
--- a/arch/avr32/mach-at32ap/clock.c
+++ b/arch/avr32/mach-at32ap/clock.c
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2006 Atmel Corporation
  *
- * Based on arch/arm/mach-at91rm9200/clock.c
+ * Based on arch/arm/mach-at91/clock.c
  *   Copyright (C) 2005 David Brownell
  *   Copyright (C) 2005 Ivan Kokshaysky
  *
diff --git a/arch/avr32/mach-at32ap/clock.h b/arch/avr32/mach-at32ap/clock.h
index f953f04..bb8e1f2 100644
--- a/arch/avr32/mach-at32ap/clock.h
+++ b/arch/avr32/mach-at32ap/clock.h
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2006 Atmel Corporation
  *
- * Based on arch/arm/mach-at91rm9200/clock.c
+ * Based on arch/arm/mach-at91/clock.c
  *   Copyright (C) 2005 David Brownell
  *   Copyright (C) 2005 Ivan Kokshaysky
  *
diff --git a/include/asm-arm/arch-at91/at91_aic.h b/include/asm-arm/arch-at91/at91_aic.h
new file mode 100644
index 0000000..df44c12
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_aic.h
@@ -0,0 +1,53 @@
+/*
+ * include/asm-arm/arch-at91/at91_aic.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Advanced Interrupt Controller (AIC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_AIC_H
+#define AT91_AIC_H
+
+#define AT91_AIC_SMR(n)		(AT91_AIC + ((n) * 4))	/* Source Mode Registers 0-31 */
+#define		AT91_AIC_PRIOR		(7 << 0)		/* Priority Level */
+#define		AT91_AIC_SRCTYPE	(3 << 5)		/* Interrupt Source Type */
+#define			AT91_AIC_SRCTYPE_LOW		(0 << 5)
+#define			AT91_AIC_SRCTYPE_FALLING	(1 << 5)
+#define			AT91_AIC_SRCTYPE_HIGH		(2 << 5)
+#define			AT91_AIC_SRCTYPE_RISING		(3 << 5)
+
+#define AT91_AIC_SVR(n)		(AT91_AIC + 0x80 + ((n) * 4))	/* Source Vector Registers 0-31 */
+#define AT91_AIC_IVR		(AT91_AIC + 0x100)	/* Interrupt Vector Register */
+#define AT91_AIC_FVR		(AT91_AIC + 0x104)	/* Fast Interrupt Vector Register */
+#define AT91_AIC_ISR		(AT91_AIC + 0x108)	/* Interrupt Status Register */
+#define		AT91_AIC_IRQID		(0x1f << 0)		/* Current Interrupt Identifier */
+
+#define AT91_AIC_IPR		(AT91_AIC + 0x10c)	/* Interrupt Pending Register */
+#define AT91_AIC_IMR		(AT91_AIC + 0x110)	/* Interrupt Mask Register */
+#define AT91_AIC_CISR		(AT91_AIC + 0x114)	/* Core Interrupt Status Register */
+#define		AT91_AIC_NFIQ		(1 << 0)		/* nFIQ Status */
+#define		AT91_AIC_NIRQ		(1 << 1)		/* nIRQ Status */
+
+#define AT91_AIC_IECR		(AT91_AIC + 0x120)	/* Interrupt Enable Command Register */
+#define AT91_AIC_IDCR		(AT91_AIC + 0x124)	/* Interrupt Disable Command Register */
+#define AT91_AIC_ICCR		(AT91_AIC + 0x128)	/* Interrupt Clear Command Register */
+#define AT91_AIC_ISCR		(AT91_AIC + 0x12c)	/* Interrupt Set Command Register */
+#define AT91_AIC_EOICR		(AT91_AIC + 0x130)	/* End of Interrupt Command Register */
+#define AT91_AIC_SPU		(AT91_AIC + 0x134)	/* Spurious Interrupt Vector Register */
+#define AT91_AIC_DCR		(AT91_AIC + 0x138)	/* Debug Control Register */
+#define		AT91_AIC_DCR_PROT	(1 << 0)		/* Protection Mode */
+#define		AT91_AIC_DCR_GMSK	(1 << 1)		/* General Mask */
+
+#define AT91_AIC_FFER		(AT91_AIC + 0x140)	/* Fast Forcing Enable Register [SAM9 only] */
+#define AT91_AIC_FFDR		(AT91_AIC + 0x144)	/* Fast Forcing Disable Register [SAM9 only] */
+#define AT91_AIC_FFSR		(AT91_AIC + 0x148)	/* Fast Forcing Status Register [SAM9 only] */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_dbgu.h b/include/asm-arm/arch-at91/at91_dbgu.h
new file mode 100644
index 0000000..1002a80
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_dbgu.h
@@ -0,0 +1,45 @@
+/*
+ * include/asm-arm/arch-at91/at91_dbgu.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Debug Unit (DBGU) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_DBGU_H
+#define AT91_DBGU_H
+
+#define AT91_DBGU_CR		(AT91_DBGU + 0x00)	/* Control Register */
+#define AT91_DBGU_MR		(AT91_DBGU + 0x04)	/* Mode Register */
+#define AT91_DBGU_IER		(AT91_DBGU + 0x08)	/* Interrupt Enable Register */
+#define		AT91_DBGU_TXRDY		(1 << 1)		/* Transmitter Ready */
+#define		AT91_DBGU_TXEMPTY	(1 << 9)		/* Transmitter Empty */
+#define AT91_DBGU_IDR		(AT91_DBGU + 0x0c)	/* Interrupt Disable Register */
+#define AT91_DBGU_IMR		(AT91_DBGU + 0x10)	/* Interrupt Mask Register */
+#define AT91_DBGU_SR		(AT91_DBGU + 0x14)	/* Status Register */
+#define AT91_DBGU_RHR		(AT91_DBGU + 0x18)	/* Receiver Holding Register */
+#define AT91_DBGU_THR		(AT91_DBGU + 0x1c)	/* Transmitter Holding Register */
+#define AT91_DBGU_BRGR		(AT91_DBGU + 0x20)	/* Baud Rate Generator Register */
+
+#define AT91_DBGU_CIDR		(AT91_DBGU + 0x40)	/* Chip ID Register */
+#define AT91_DBGU_EXID		(AT91_DBGU + 0x44)	/* Chip ID Extension Register */
+#define		AT91_CIDR_VERSION	(0x1f << 0)		/* Version of the Device */
+#define		AT91_CIDR_EPROC		(7    << 5)		/* Embedded Processor */
+#define		AT91_CIDR_NVPSIZ	(0xf  << 8)		/* Nonvolatile Program Memory Size */
+#define		AT91_CIDR_NVPSIZ2	(0xf  << 12)		/* Second Nonvolatile Program Memory Size */
+#define		AT91_CIDR_SRAMSIZ	(0xf  << 16)		/* Internal SRAM Size */
+#define		AT91_CIDR_ARCH		(0xff << 20)		/* Architecture Identifier */
+#define		AT91_CIDR_NVPTYP	(7    << 28)		/* Nonvolatile Program Memory Type */
+#define		AT91_CIDR_EXT		(1    << 31)		/* Extension Flag */
+
+#define AT91_DBGU_FNR		(AT91_DBGU + 0x48)	/* Force NTRST Register [SAM9 only] */
+#define		AT91_DBGU_FNTRST	(1 << 0)		/* Force NTRST */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_ecc.h b/include/asm-arm/arch-at91/at91_ecc.h
new file mode 100644
index 0000000..ff93df5
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_ecc.h
@@ -0,0 +1,38 @@
+/*
+ * include/asm-arm/arch-at91/at91_ecc.h
+ *
+ * Error Corrected Code Controller (ECC) - System peripherals regsters.
+ * Based on AT91SAM9260 datasheet revision B.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef AT91_ECC_H
+#define AT91_ECC_H
+
+#define AT91_ECC_CR		(AT91_ECC + 0x00)	/* Control register */
+#define		AT91_ECC_RST		(1 << 0)		/* Reset parity */
+
+#define AT91_ECC_MR		(AT91_ECC + 0x04)	/* Mode register */
+#define		AT91_ECC_PAGESIZE	(3 << 0)		/* Page Size */
+#define			AT91_ECC_PAGESIZE_528		(0)
+#define			AT91_ECC_PAGESIZE_1056		(1)
+#define			AT91_ECC_PAGESIZE_2112		(2)
+#define			AT91_ECC_PAGESIZE_4224		(3)
+
+#define AT91_ECC_SR		(AT91_ECC + 0x08)	/* Status register */
+#define		AT91_ECC_RECERR		(1 << 0)		/* Recoverable Error */
+#define		AT91_ECC_ECCERR		(1 << 1)		/* ECC Single Bit Error */
+#define		AT91_ECC_MULERR		(1 << 2)		/* Multiple Errors */
+
+#define AT91_ECC_PR		(AT91_ECC + 0x0c)	/* Parity register */
+#define		AT91_ECC_BITADDR	(0xf << 0)		/* Bit Error Address */
+#define		AT91_ECC_WORDADDR	(0xfff << 4)		/* Word Error Address */
+
+#define AT91_ECC_NPR		(AT91_ECC + 0x10)	/* NParity register */
+#define		AT91_ECC_NPARITY	(0xffff << 0)		/* NParity */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_lcdc.h b/include/asm-arm/arch-at91/at91_lcdc.h
new file mode 100644
index 0000000..ab040a4
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_lcdc.h
@@ -0,0 +1,148 @@
+/*
+ * include/asm-arm/arch-at91/at91_lcdc.h
+ *
+ * LCD Controller (LCDC).
+ * Based on AT91SAM9261 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_LCDC_H
+#define AT91_LCDC_H
+
+#define AT91_LCDC_DMABADDR1	0x00		/* DMA Base Address Register 1 */
+#define AT91_LCDC_DMABADDR2	0x04		/* DMA Base Address Register 2 */
+#define AT91_LCDC_DMAFRMPT1	0x08		/* DMA Frame Pointer Register 1 */
+#define AT91_LCDC_DMAFRMPT2	0x0c		/* DMA Frame Pointer Register 2 */
+#define AT91_LCDC_DMAFRMADD1	0x10		/* DMA Frame Address Register 1 */
+#define AT91_LCDC_DMAFRMADD2	0x14		/* DMA Frame Address Register 2 */
+
+#define AT91_LCDC_DMAFRMCFG	0x18		/* DMA Frame Configuration Register */
+#define		AT91_LCDC_FRSIZE	(0x7fffff <<  0)	/* Frame Size */
+#define		AT91_LCDC_BLENGTH	(0x7f     << 24)	/* Burst Length */
+
+#define AT91_LCDC_DMACON	0x1c		/* DMA Control Register */
+#define		AT91_LCDC_DMAEN		(0x1 << 0)	/* DMA Enable */
+#define		AT91_LCDC_DMARST	(0x1 << 1)	/* DMA Reset */
+#define		AT91_LCDC_DMABUSY	(0x1 << 2)	/* DMA Busy */
+
+#define AT91_LCDC_LCDCON1	0x0800		/* LCD Control Register 1 */
+#define		AT91_LCDC_BYPASS	(1     <<  0)	/* Bypass lcd_dotck divider */
+#define		AT91_LCDC_CLKVAL	(0x1ff << 12)	/* Clock Divider */
+#define		AT91_LCDC_LINCNT	(0x7ff << 21)	/* Line Counter */
+
+#define AT91_LCDC_LCDCON2	0x0804		/* LCD Control Register 2 */
+#define		AT91_LCDC_DISTYPE	(3 << 0)	/* Display Type */
+#define			AT91_LCDC_DISTYPE_STNMONO	(0 << 0)
+#define			AT91_LCDC_DISTYPE_STNCOLOR	(1 << 0)
+#define			AT91_LCDC_DISTYPE_TFT		(2 << 0)
+#define		AT91_LCDC_SCANMOD	(1 << 2)	/* Scan Mode */
+#define			AT91_LCDC_SCANMOD_SINGLE	(0 << 2)
+#define			AT91_LCDC_SCANMOD_DUAL		(1 << 2)
+#define		AT91_LCDC_IFWIDTH	(3 << 3)	/*Interface Width */
+#define			AT91_LCDC_IFWIDTH_4		(0 << 3)
+#define			AT91_LCDC_IFWIDTH_8		(1 << 3)
+#define			AT91_LCDC_IFWIDTH_16		(2 << 3)
+#define		AT91_LCDC_PIXELSIZE	(7 << 5)	/* Bits per pixel */
+#define			AT91_LCDC_PIXELSIZE_1		(0 << 5)
+#define			AT91_LCDC_PIXELSIZE_2		(1 << 5)
+#define			AT91_LCDC_PIXELSIZE_4		(2 << 5)
+#define			AT91_LCDC_PIXELSIZE_8		(3 << 5)
+#define			AT91_LCDC_PIXELSIZE_16		(4 << 5)
+#define			AT91_LCDC_PIXELSIZE_24		(5 << 5)
+#define		AT91_LCDC_INVVD		(1 << 8)	/* LCD Data polarity */
+#define			AT91_LCDC_INVVD_NORMAL		(0 << 8)
+#define			AT91_LCDC_INVVD_INVERTED	(1 << 8)
+#define		AT91_LCDC_INVFRAME	(1 << 9 )	/* LCD VSync polarity */
+#define			AT91_LCDC_INVFRAME_NORMAL	(0 << 9)
+#define			AT91_LCDC_INVFRAME_INVERTED	(1 << 9)
+#define		AT91_LCDC_INVLINE	(1 << 10)	/* LCD HSync polarity */
+#define			AT91_LCDC_INVLINE_NORMAL	(0 << 10)
+#define			AT91_LCDC_INVLINE_INVERTED	(1 << 10)
+#define		AT91_LCDC_INVCLK	(1 << 11)	/* LCD dotclk polarity */
+#define			AT91_LCDC_INVCLK_NORMAL		(0 << 11)
+#define			AT91_LCDC_INVCLK_INVERTED	(1 << 11)
+#define		AT91_LCDC_INVDVAL	(1 << 12)	/* LCD dval polarity */
+#define			AT91_LCDC_INVDVAL_NORMAL	(0 << 12)
+#define			AT91_LCDC_INVDVAL_INVERTED	(1 << 12)
+#define		AT91_LCDC_CLKMOD	(1 << 15)	/* LCD dotclk mode */
+#define			AT91_LCDC_CLKMOD_ACTIVEDISPLAY	(0 << 15)
+#define			AT91_LCDC_CLKMOD_ALWAYSACTIVE	(1 << 15)
+#define		AT91_LCDC_MEMOR		(1 << 31)	/* Memory Ordering Format */
+#define			AT91_LCDC_MEMOR_BIG		(0 << 31)
+#define			AT91_LCDC_MEMOR_LITTLE		(1 << 31)
+
+#define AT91_LCDC_TIM1		0x0808		/* LCD Timing Register 1 */
+#define		AT91_LCDC_VFP		(0xff <<  0)	/* Vertical Front Porch */
+#define		AT91_LCDC_VBP		(0xff <<  8)	/* Vertical Back Porch */
+#define		AT91_LCDC_VPW		(0x3f << 16)	/* Vertical Synchronization Pulse Width */
+#define		AT91_LCDC_VHDLY		(0xf  << 24)	/* Vertical to Horizontal Delay */
+
+#define AT91_LCDC_TIM2		0x080c		/* LCD Timing Register 2 */
+#define		AT91_LCDC_HBP		(0xff  <<  0)	/* Horizontal Back Porch */
+#define		AT91_LCDC_HPW		(0x3f  <<  8)	/* Horizontal Synchronization Pulse Width */
+#define		AT91_LCDC_HFP		(0x7ff << 21)	/* Horizontal Front Porch */
+
+#define AT91_LCDC_LCDFRMCFG	0x0810		/* LCD Frame Configuration Register */
+#define		AT91_LCDC_LINEVAL	(0x7ff <<  0)	/* Vertical Size of LCD Module */
+#define		AT91_LCDC_HOZVAL	(0x7ff << 21)	/* Horizontal Size of LCD Module */
+
+#define AT91_LCDC_FIFO		0x0814		/* LCD FIFO Register */
+#define		AT91_LCDC_FIFOTH	(0xffff)	/* FIFO Threshold */
+
+#define AT91_LCDC_DP1_2		0x081c		/* Dithering Pattern DP1_2 Register */
+#define AT91_LCDC_DP4_7		0x0820		/* Dithering Pattern DP4_7 Register */
+#define AT91_LCDC_DP3_5		0x0824		/* Dithering Pattern DP3_5 Register */
+#define AT91_LCDC_DP2_3		0x0828		/* Dithering Pattern DP2_3 Register */
+#define AT91_LCDC_DP5_7		0x082c		/* Dithering Pattern DP5_7 Register */
+#define AT91_LCDC_DP3_4		0x0830		/* Dithering Pattern DP3_4 Register */
+#define AT91_LCDC_DP4_5		0x0834		/* Dithering Pattern DP4_5 Register */
+#define AT91_LCDC_DP6_7		0x0838		/* Dithering Pattern DP6_7 Register */
+#define		AT91_LCDC_DP1_2_VAL	(0xff)
+#define		AT91_LCDC_DP4_7_VAL	(0xfffffff)
+#define		AT91_LCDC_DP3_5_VAL	(0xfffff)
+#define		AT91_LCDC_DP2_3_VAL	(0xfff)
+#define		AT91_LCDC_DP5_7_VAL	(0xfffffff)
+#define		AT91_LCDC_DP3_4_VAL	(0xffff)
+#define		AT91_LCDC_DP4_5_VAL	(0xfffff)
+#define		AT91_LCDC_DP6_7_VAL	(0xfffffff)
+
+#define AT91_LCDC_PWRCON	0x083c		/* Power Control Register */
+#define		AT91_LCDC_PWR		(1    <<  0)	/* LCD Module Power Control */
+#define		AT91_LCDC_GUARDT	(0x7f <<  1)	/* Delay in Frame Period */
+#define		AT91_LCDC_BUSY		(1    << 31)	/* LCD Busy */
+
+#define AT91_LCDC_CONTRAST_CTR	0x0840		/* Contrast Control Register */
+#define		AT91_LCDC_PS		(3 << 0)	/* Contrast Counter Prescaler */
+#define			AT91_LCDC_PS_DIV1		(0 << 0)
+#define			AT91_LCDC_PS_DIV2		(1 << 0)
+#define			AT91_LCDC_PS_DIV4		(2 << 0)
+#define			AT91_LCDC_PS_DIV8		(3 << 0)
+#define		AT91_LCDC_POL		(1 << 2)	/* Polarity of output Pulse */
+#define			AT91_LCDC_POL_NEGATIVE		(0 << 2)
+#define			AT91_LCDC_POL_POSITIVE		(1 << 2)
+#define		AT91_LCDC_ENA		(1 << 3)	/* PWM generator Control */
+#define			AT91_LCDC_ENA_PWMDISABLE	(0 << 3)
+#define			AT91_LCDC_ENA_PWMENABLE		(1 << 3)
+
+#define AT91_LCDC_CONTRAST_VAL	0x0844		/* Contrast Value Register */
+#define		AT91_LCDC_CVAL		(0xff)		/* PWM compare value */
+
+#define AT91_LCDC_IER		0x0848		/* Interrupt Enable Register */
+#define AT91_LCDC_IDR		0x084c		/* Interrupt Disable Register */
+#define AT91_LCDC_IMR		0x0850		/* Interrupt Mask Register */
+#define AT91_LCDC_ISR		0x0854		/* Interrupt Enable Register */
+#define AT91_LCDC_ICR		0x0858		/* Interrupt Clear Register */
+#define		AT91_LCDC_LNI		(1 << 0)	/* Line Interrupt */
+#define		AT91_LCDC_LSTLNI	(1 << 1)	/* Last Line Interrupt */
+#define		AT91_LCDC_EOFI		(1 << 2)	/* DMA End Of Frame Interrupt */
+#define		AT91_LCDC_UFLWI		(1 << 4)	/* FIFO Underflow Interrupt */
+#define		AT91_LCDC_OWRI		(1 << 5)	/* FIFO Overwrite Interrupt */
+#define		AT91_LCDC_MERI		(1 << 6)	/* DMA Memory Error Interrupt */
+
+#define AT91_LCDC_LUT_(n)	(0x0c00 + ((n)*4))	/* Palette Entry 0..255 */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_mci.h b/include/asm-arm/arch-at91/at91_mci.h
new file mode 100644
index 0000000..40a9876
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_mci.h
@@ -0,0 +1,106 @@
+/*
+ * include/asm-arm/arch-at91/at91_mci.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * MultiMedia Card Interface (MCI) registers.
+ * Based on AT91RM9200 datasheet revision F.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_MCI_H
+#define AT91_MCI_H
+
+#define AT91_MCI_CR		0x00		/* Control Register */
+#define		AT91_MCI_MCIEN		(1 <<  0)	/* Multi-Media Interface Enable */
+#define		AT91_MCI_MCIDIS		(1 <<  1)	/* Multi-Media Interface Disable */
+#define		AT91_MCI_PWSEN		(1 <<  2)	/* Power Save Mode Enable */
+#define		AT91_MCI_PWSDIS		(1 <<  3)	/* Power Save Mode Disable */
+#define		AT91_MCI_SWRST		(1 <<  7)	/* Software Reset */
+
+#define AT91_MCI_MR		0x04		/* Mode Register */
+#define		AT91_MCI_CLKDIV		(0xff  <<  0)	/* Clock Divider */
+#define		AT91_MCI_PWSDIV		(7     <<  8)	/* Power Saving Divider */
+#define		AT91_MCI_PDCPADV	(1     << 14)	/* PDC Padding Value */
+#define		AT91_MCI_PDCMODE	(1     << 15)	/* PDC-orientated Mode */
+#define		AT91_MCI_BLKLEN		(0xfff << 18)	/* Data Block Length */
+
+#define AT91_MCI_DTOR		0x08		/* Data Timeout Register */
+#define		AT91_MCI_DTOCYC		(0xf << 0)	/* Data Timeout Cycle Number */
+#define		AT91_MCI_DTOMUL		(7   << 4)	/* Data Timeout Multiplier */
+#define		AT91_MCI_DTOMUL_1		(0 <<  4)
+#define		AT91_MCI_DTOMUL_16		(1 <<  4)
+#define		AT91_MCI_DTOMUL_128		(2 <<  4)
+#define		AT91_MCI_DTOMUL_256		(3 <<  4)
+#define		AT91_MCI_DTOMUL_1K		(4 <<  4)
+#define		AT91_MCI_DTOMUL_4K		(5 <<  4)
+#define		AT91_MCI_DTOMUL_64K		(6 <<  4)
+#define		AT91_MCI_DTOMUL_1M		(7 <<  4)
+
+#define AT91_MCI_SDCR		0x0c		/* SD Card Register */
+#define		AT91_MCI_SDCSEL		(3 << 0)	/* SD Card Selector */
+#define		AT91_MCI_SDCBUS		(1 << 7)	/* 1-bit or 4-bit bus */
+
+#define AT91_MCI_ARGR		0x10		/* Argument Register */
+
+#define AT91_MCI_CMDR		0x14		/* Command Register */
+#define		AT91_MCI_CMDNB		(0x3f << 0)	/* Command Number */
+#define		AT91_MCI_RSPTYP		(3    << 6)	/* Response Type */
+#define			AT91_MCI_RSPTYP_NONE	(0 <<  6)
+#define			AT91_MCI_RSPTYP_48	(1 <<  6)
+#define			AT91_MCI_RSPTYP_136	(2 <<  6)
+#define		AT91_MCI_SPCMD		(7    << 8)	/* Special Command */
+#define			AT91_MCI_SPCMD_NONE	(0 <<  8)
+#define			AT91_MCI_SPCMD_INIT	(1 <<  8)
+#define			AT91_MCI_SPCMD_SYNC	(2 <<  8)
+#define			AT91_MCI_SPCMD_ICMD	(4 <<  8)
+#define			AT91_MCI_SPCMD_IRESP	(5 <<  8)
+#define		AT91_MCI_OPDCMD		(1 << 11)	/* Open Drain Command */
+#define		AT91_MCI_MAXLAT		(1 << 12)	/* Max Latency for Command to Response */
+#define		AT91_MCI_TRCMD		(3 << 16)	/* Transfer Command */
+#define			AT91_MCI_TRCMD_NONE	(0 << 16)
+#define			AT91_MCI_TRCMD_START	(1 << 16)
+#define			AT91_MCI_TRCMD_STOP	(2 << 16)
+#define		AT91_MCI_TRDIR		(1 << 18)	/* Transfer Direction */
+#define		AT91_MCI_TRTYP		(3 << 19)	/* Transfer Type */
+#define			AT91_MCI_TRTYP_BLOCK	(0 << 19)
+#define			AT91_MCI_TRTYP_MULTIPLE	(1 << 19)
+#define			AT91_MCI_TRTYP_STREAM	(2 << 19)
+
+#define AT91_MCI_RSPR(n)	(0x20 + ((n) * 4))	/* Response Registers 0-3 */
+#define AT91_MCR_RDR		0x30		/* Receive Data Register */
+#define AT91_MCR_TDR		0x34		/* Transmit Data Register */
+
+#define AT91_MCI_SR		0x40		/* Status Register */
+#define		AT91_MCI_CMDRDY		(1 <<  0)	/* Command Ready */
+#define		AT91_MCI_RXRDY		(1 <<  1)	/* Receiver Ready */
+#define		AT91_MCI_TXRDY		(1 <<  2)	/* Transmit Ready */
+#define		AT91_MCI_BLKE		(1 <<  3)	/* Data Block Ended */
+#define		AT91_MCI_DTIP		(1 <<  4)	/* Data Transfer in Progress */
+#define		AT91_MCI_NOTBUSY	(1 <<  5)	/* Data Not Busy */
+#define		AT91_MCI_ENDRX		(1 <<  6)	/* End of RX Buffer */
+#define		AT91_MCI_ENDTX		(1 <<  7)	/* End fo TX Buffer */
+#define		AT91_MCI_SDIOIRQA	(1 <<  8)	/* SDIO Interrupt for Slot A */
+#define		At91_MCI_SDIOIRQB	(1 <<  9)	/* SDIO Interrupt for Slot B [AT91RM9200 only] */
+#define		AT91_MCI_RXBUFF		(1 << 14)	/* RX Buffer Full */
+#define		AT91_MCI_TXBUFE		(1 << 15)	/* TX Buffer Empty */
+#define		AT91_MCI_RINDE		(1 << 16)	/* Response Index Error */
+#define		AT91_MCI_RDIRE		(1 << 17)	/* Response Direction Error */
+#define		AT91_MCI_RCRCE		(1 << 18)	/* Response CRC Error */
+#define		AT91_MCI_RENDE		(1 << 19)	/* Response End Bit Error */
+#define		AT91_MCI_RTOE		(1 << 20)	/* Reponse Time-out Error */
+#define		AT91_MCI_DCRCE		(1 << 21)	/* Data CRC Error */
+#define		AT91_MCI_DTOE		(1 << 22)	/* Data Time-out Error */
+#define		AT91_MCI_OVRE		(1 << 30)	/* Overrun */
+#define		AT91_MCI_UNRE		(1 << 31)	/* Underrun */
+
+#define AT91_MCI_IER		0x44		/* Interrupt Enable Register */
+#define AT91_MCI_IDR		0x48		/* Interrupt Disable Register */
+#define AT91_MCI_IMR		0x4c		/* Interrupt Mask Register */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_pdc.h b/include/asm-arm/arch-at91/at91_pdc.h
new file mode 100644
index 0000000..a54adf5
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_pdc.h
@@ -0,0 +1,36 @@
+/*
+ * include/asm-arm/arch-at91/at91_pdc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Peripheral Data Controller (PDC) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PDC_H
+#define AT91_PDC_H
+
+#define AT91_PDC_RPR		0x100	/* Receive Pointer Register */
+#define AT91_PDC_RCR		0x104	/* Receive Counter Register */
+#define AT91_PDC_TPR		0x108	/* Transmit Pointer Register */
+#define AT91_PDC_TCR		0x10c	/* Transmit Counter Register */
+#define AT91_PDC_RNPR		0x110	/* Receive Next Pointer Register */
+#define AT91_PDC_RNCR		0x114	/* Receive Next Counter Register */
+#define AT91_PDC_TNPR		0x118	/* Transmit Next Pointer Register */
+#define AT91_PDC_TNCR		0x11c	/* Transmit Next Counter Register */
+
+#define AT91_PDC_PTCR		0x120	/* Transfer Control Register */
+#define		AT91_PDC_RXTEN		(1 << 0)	/* Receiver Transfer Enable */
+#define		AT91_PDC_RXTDIS		(1 << 1)	/* Receiver Transfer Disable */
+#define		AT91_PDC_TXTEN		(1 << 8)	/* Transmitter Transfer Enable */
+#define		AT91_PDC_TXTDIS		(1 << 9)	/* Transmitter Transfer Disable */
+
+#define AT91_PDC_PTSR		0x124	/* Transfer Status Register */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_pio.h b/include/asm-arm/arch-at91/at91_pio.h
new file mode 100644
index 0000000..84c3866
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_pio.h
@@ -0,0 +1,49 @@
+/*
+ * include/asm-arm/arch-at91/at91_pio.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Parallel I/O Controller (PIO) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PIO_H
+#define AT91_PIO_H
+
+#define PIO_PER		0x00	/* Enable Register */
+#define PIO_PDR		0x04	/* Disable Register */
+#define PIO_PSR		0x08	/* Status Register */
+#define PIO_OER		0x10	/* Output Enable Register */
+#define PIO_ODR		0x14	/* Output Disable Register */
+#define PIO_OSR		0x18	/* Output Status Register */
+#define PIO_IFER	0x20	/* Glitch Input Filter Enable */
+#define PIO_IFDR	0x24	/* Glitch Input Filter Disable */
+#define PIO_IFSR	0x28	/* Glitch Input Filter Status */
+#define PIO_SODR	0x30	/* Set Output Data Register */
+#define PIO_CODR	0x34	/* Clear Output Data Register */
+#define PIO_ODSR	0x38	/* Output Data Status Register */
+#define PIO_PDSR	0x3c	/* Pin Data Status Register */
+#define PIO_IER		0x40	/* Interrupt Enable Register */
+#define PIO_IDR		0x44	/* Interrupt Disable Register */
+#define PIO_IMR		0x48	/* Interrupt Mask Register */
+#define PIO_ISR		0x4c	/* Interrupt Status Register */
+#define PIO_MDER	0x50	/* Multi-driver Enable Register */
+#define PIO_MDDR	0x54	/* Multi-driver Disable Register */
+#define PIO_MDSR	0x58	/* Multi-driver Status Register */
+#define PIO_PUDR	0x60	/* Pull-up Disable Register */
+#define PIO_PUER	0x64	/* Pull-up Enable Register */
+#define PIO_PUSR	0x68	/* Pull-up Status Register */
+#define PIO_ASR		0x70	/* Peripheral A Select Register */
+#define PIO_BSR		0x74	/* Peripheral B Select Register */
+#define PIO_ABSR	0x78	/* AB Status Register */
+#define PIO_OWER	0xa0	/* Output Write Enable Register */
+#define PIO_OWDR	0xa4	/* Output Write Disable Register */
+#define PIO_OWSR	0xa8	/* Output Write Status Register */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_pit.h b/include/asm-arm/arch-at91/at91_pit.h
new file mode 100644
index 0000000..5026325
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_pit.h
@@ -0,0 +1,29 @@
+/*
+ * include/asm-arm/arch-at91/at91_pit.h
+ *
+ * Periodic Interval Timer (PIT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PIT_H
+#define AT91_PIT_H
+
+#define AT91_PIT_MR		(AT91_PIT + 0x00)	/* Mode Register */
+#define		AT91_PIT_PITIEN		(1 << 25)		/* Timer Interrupt Enable */
+#define		AT91_PIT_PITEN		(1 << 24)		/* Timer Enabled */
+#define		AT91_PIT_PIV		(0xfffff)		/* Periodic Interval Value */
+
+#define AT91_PIT_SR		(AT91_PIT + 0x04)	/* Status Register */
+#define		AT91_PIT_PITS		(1 << 0)		/* Timer Status */
+
+#define AT91_PIT_PIVR		(AT91_PIT + 0x08)	/* Periodic Interval Value Register */
+#define AT91_PIT_PIIR		(AT91_PIT + 0x0c)	/* Periodic Interval Image Register */
+#define		AT91_PIT_PICNT		(0xfff << 20)		/* Interval Counter */
+#define		AT91_PIT_CPIV		(0xfffff)		/* Inverval Value */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_pmc.h b/include/asm-arm/arch-at91/at91_pmc.h
new file mode 100644
index 0000000..33ff5b6
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_pmc.h
@@ -0,0 +1,92 @@
+/*
+ * include/asm-arm/arch-at91/at91_pmc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Power Management Controller (PMC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PMC_H
+#define AT91_PMC_H
+
+#define	AT91_PMC_SCER		(AT91_PMC + 0x00)	/* System Clock Enable Register */
+#define	AT91_PMC_SCDR		(AT91_PMC + 0x04)	/* System Clock Disable Register */
+
+#define	AT91_PMC_SCSR		(AT91_PMC + 0x08)	/* System Clock Status Register */
+#define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
+#define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
+#define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
+#define		AT91RM9200_PMC_UHP	(1 <<  4)		/* USB Host Port Clock [AT91RM9200 only] */
+#define		AT91SAM926x_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91SAM926x only] */
+#define		AT91SAM926x_PMC_UDP	(1 <<  7)		/* USB Devcice Port Clock [AT91SAM926x only] */
+#define		AT91_PMC_PCK0		(1 <<  8)		/* Programmable Clock 0 */
+#define		AT91_PMC_PCK1		(1 <<  9)		/* Programmable Clock 1 */
+#define		AT91_PMC_PCK2		(1 << 10)		/* Programmable Clock 2 */
+#define		AT91_PMC_PCK3		(1 << 11)		/* Programmable Clock 3 */
+#define		AT91_PMC_HCK0		(1 << 16)		/* AHB Clock (USB host) [AT91SAM9261 only] */
+#define		AT91_PMC_HCK1		(1 << 17)		/* AHB Clock (LCD) [AT91SAM9261 only] */
+
+#define	AT91_PMC_PCER		(AT91_PMC + 0x10)	/* Peripheral Clock Enable Register */
+#define	AT91_PMC_PCDR		(AT91_PMC + 0x14)	/* Peripheral Clock Disable Register */
+#define	AT91_PMC_PCSR		(AT91_PMC + 0x18)	/* Peripheral Clock Status Register */
+
+#define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register */
+#define		AT91_PMC_MOSCEN		(1    << 0)		/* Main Oscillator Enable */
+#define		AT91_PMC_OSCBYPASS	(1    << 1)		/* Oscillator Bypass [AT91SAM926x only] */
+#define		AT91_PMC_OSCOUNT	(0xff << 8)		/* Main Oscillator Start-up Time */
+
+#define	AT91_CKGR_MCFR		(AT91_PMC + 0x24)	/* Main Clock Frequency Register */
+#define		AT91_PMC_MAINF		(0xffff <<  0)		/* Main Clock Frequency */
+#define		AT91_PMC_MAINRDY	(1	<< 16)		/* Main Clock Ready */
+
+#define	AT91_CKGR_PLLAR		(AT91_PMC + 0x28)	/* PLL A Register */
+#define	AT91_CKGR_PLLBR		(AT91_PMC + 0x2c)	/* PLL B Register */
+#define		AT91_PMC_DIV		(0xff  <<  0)		/* Divider */
+#define		AT91_PMC_PLLCOUNT	(0x3f  <<  8)		/* PLL Counter */
+#define		AT91_PMC_OUT		(3     << 14)		/* PLL Clock Frequency Range */
+#define		AT91_PMC_MUL		(0x7ff << 16)		/* PLL Multiplier */
+#define		AT91_PMC_USB96M		(1     << 28)		/* Divider by 2 Enable (PLLB only) */
+
+#define	AT91_PMC_MCKR		(AT91_PMC + 0x30)	/* Master Clock Register */
+#define		AT91_PMC_CSS		(3 <<  0)		/* Master Clock Selection */
+#define			AT91_PMC_CSS_SLOW		(0 << 0)
+#define			AT91_PMC_CSS_MAIN		(1 << 0)
+#define			AT91_PMC_CSS_PLLA		(2 << 0)
+#define			AT91_PMC_CSS_PLLB		(3 << 0)
+#define		AT91_PMC_PRES		(7 <<  2)		/* Master Clock Prescaler */
+#define			AT91_PMC_PRES_1			(0 << 2)
+#define			AT91_PMC_PRES_2			(1 << 2)
+#define			AT91_PMC_PRES_4			(2 << 2)
+#define			AT91_PMC_PRES_8			(3 << 2)
+#define			AT91_PMC_PRES_16		(4 << 2)
+#define			AT91_PMC_PRES_32		(5 << 2)
+#define			AT91_PMC_PRES_64		(6 << 2)
+#define		AT91_PMC_MDIV		(3 <<  8)		/* Master Clock Division */
+#define			AT91_PMC_MDIV_1			(0 << 8)
+#define			AT91_PMC_MDIV_2			(1 << 8)
+#define			AT91_PMC_MDIV_3			(2 << 8)
+#define			AT91_PMC_MDIV_4			(3 << 8)
+
+#define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-3 Registers */
+
+#define	AT91_PMC_IER		(AT91_PMC + 0x60)	/* Interrupt Enable Register */
+#define	AT91_PMC_IDR		(AT91_PMC + 0x64)	/* Interrupt Disable Register */
+#define	AT91_PMC_SR		(AT91_PMC + 0x68)	/* Status Register */
+#define		AT91_PMC_MOSCS		(1 <<  0)		/* MOSCS Flag */
+#define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
+#define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
+#define		AT91_PMC_MCKRDY		(1 <<  3)		/* Master Clock */
+#define		AT91_PMC_PCK0RDY	(1 <<  8)		/* Programmable Clock 0 */
+#define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
+#define		AT91_PMC_PCK2RDY	(1 << 10)		/* Programmable Clock 2 */
+#define		AT91_PMC_PCK3RDY	(1 << 11)		/* Programmable Clock 3 */
+#define	AT91_PMC_IMR		(AT91_PMC + 0x6c)	/* Interrupt Mask Register */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_rstc.h b/include/asm-arm/arch-at91/at91_rstc.h
new file mode 100644
index 0000000..0b7afbc
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_rstc.h
@@ -0,0 +1,39 @@
+/*
+ * include/asm-arm/arch-at91/at91_rstc.h
+ *
+ * Reset Controller (RSTC) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_RSTC_H
+#define AT91_RSTC_H
+
+#define AT91_RSTC_CR		(AT91_RSTC + 0x00)	/* Reset Controller Control Register */
+#define		AT91_RSTC_PROCRST	(1 << 0)		/* Processor Reset */
+#define		AT91_RSTC_PERRST	(1 << 2)		/* Peripheral Reset */
+#define		AT91_RSTC_EXTRST	(1 << 3)		/* External Reset */
+#define		AT91_RSTC_KEY		(0xff << 24)		/* KEY Password */
+
+#define AT91_RSTC_SR		(AT91_RSTC + 0x04)	/* Reset Controller Status Register */
+#define		AT91_RSTC_URSTS		(1 << 0)		/* User Reset Status */
+#define		AT91_RSTC_RSTTYP	(7 << 8)		/* Reset Type */
+#define			AT91_RSTC_RSTTYP_GENERAL	(0 << 8)
+#define			AT91_RSTC_RSTTYP_WAKEUP		(1 << 8)
+#define			AT91_RSTC_RSTTYP_WATCHDOG	(2 << 8)
+#define			AT91_RSTC_RSTTYP_SOFTWARE	(3 << 8)
+#define			AT91_RSTC_RSTTYP_USER	(4 << 8)
+#define		AT91_RSTC_NRSTL		(1 << 16)		/* NRST Pin Level */
+#define		AT91_RSTC_SRCMP		(1 << 17)		/* Software Reset Command in Progress */
+
+#define AT91_RSTC_MR		(AT91_RSTC + 0x08)	/* Reset Controller Mode Register */
+#define		AT91_RSTC_URSTEN	(1 << 0)		/* User Reset Enable */
+#define		AT91_RSTC_URSTIEN	(1 << 4)		/* User Reset Interrupt Enable */
+#define		AT91_RSTC_ERSTL		(0xf << 8)		/* External Reset Length */
+#define		AT91_RSTC_KEY		(0xff << 24)		/* KEY Password */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_rtc.h b/include/asm-arm/arch-at91/at91_rtc.h
new file mode 100644
index 0000000..af9bd28
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_rtc.h
@@ -0,0 +1,75 @@
+/*
+ * include/asm-arm/arch-at91/at91_rtc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Real Time Clock (RTC) - System peripheral registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_RTC_H
+#define AT91_RTC_H
+
+#define	AT91_RTC_CR		(AT91_RTC + 0x00)	/* Control Register */
+#define		AT91_RTC_UPDTIM		(1 <<  0)		/* Update Request Time Register */
+#define		AT91_RTC_UPDCAL		(1 <<  1)		/* Update Request Calendar Register */
+#define		AT91_RTC_TIMEVSEL	(3 <<  8)		/* Time Event Selection */
+#define			AT91_RTC_TIMEVSEL_MINUTE	(0 << 8)
+#define			AT91_RTC_TIMEVSEL_HOUR		(1 << 8)
+#define			AT91_RTC_TIMEVSEL_DAY24		(2 << 8)
+#define			AT91_RTC_TIMEVSEL_DAY12		(3 << 8)
+#define		AT91_RTC_CALEVSEL	(3 << 16)		/* Calendar Event Selection */
+#define			AT91_RTC_CALEVSEL_WEEK		(0 << 16)
+#define			AT91_RTC_CALEVSEL_MONTH		(1 << 16)
+#define			AT91_RTC_CALEVSEL_YEAR		(2 << 16)
+
+#define	AT91_RTC_MR		(AT91_RTC + 0x04)	/* Mode Register */
+#define			AT91_RTC_HRMOD		(1 <<  0)		/* 12/24 Hour Mode */
+
+#define	AT91_RTC_TIMR		(AT91_RTC + 0x08)	/* Time Register */
+#define		AT91_RTC_SEC		(0x7f <<  0)		/* Current Second */
+#define		AT91_RTC_MIN		(0x7f <<  8)		/* Current Minute */
+#define		AT91_RTC_HOUR		(0x3f << 16)		/* Current Hour */
+#define		AT91_RTC_AMPM		(1    << 22)		/* Ante Meridiem Post Meridiem Indicator */
+
+#define	AT91_RTC_CALR		(AT91_RTC + 0x0c)	/* Calendar Register */
+#define		AT91_RTC_CENT		(0x7f <<  0)		/* Current Century */
+#define		AT91_RTC_YEAR		(0xff <<  8)		/* Current Year */
+#define		AT91_RTC_MONTH		(0x1f << 16)		/* Current Month */
+#define		AT91_RTC_DAY		(7    << 21)		/* Current Day */
+#define		AT91_RTC_DATE		(0x3f << 24)		/* Current Date */
+
+#define	AT91_RTC_TIMALR		(AT91_RTC + 0x10)	/* Time Alarm Register */
+#define		AT91_RTC_SECEN		(1 <<  7)		/* Second Alarm Enable */
+#define		AT91_RTC_MINEN		(1 << 15)		/* Minute Alarm Enable */
+#define		AT91_RTC_HOUREN		(1 << 23)		/* Hour Alarm Enable */
+
+#define	AT91_RTC_CALALR		(AT91_RTC + 0x14)	/* Calendar Alarm Register */
+#define		AT91_RTC_MTHEN		(1 << 23)		/* Month Alarm Enable */
+#define		AT91_RTC_DATEEN		(1 << 31)		/* Date Alarm Enable */
+
+#define	AT91_RTC_SR		(AT91_RTC + 0x18)	/* Status Register */
+#define		AT91_RTC_ACKUPD		(1 <<  0)		/* Acknowledge for Update */
+#define		AT91_RTC_ALARM		(1 <<  1)		/* Alarm Flag */
+#define		AT91_RTC_SECEV		(1 <<  2)		/* Second Event */
+#define		AT91_RTC_TIMEV		(1 <<  3)		/* Time Event */
+#define		AT91_RTC_CALEV		(1 <<  4)		/* Calendar Event */
+
+#define	AT91_RTC_SCCR		(AT91_RTC + 0x1c)	/* Status Clear Command Register */
+#define	AT91_RTC_IER		(AT91_RTC + 0x20)	/* Interrupt Enable Register */
+#define	AT91_RTC_IDR		(AT91_RTC + 0x24)	/* Interrupt Disable Register */
+#define	AT91_RTC_IMR		(AT91_RTC + 0x28)	/* Interrupt Mask Register */
+
+#define	AT91_RTC_VER		(AT91_RTC + 0x2c)	/* Valid Entry Register */
+#define		AT91_RTC_NVTIM		(1 <<  0)		/* Non valid Time */
+#define		AT91_RTC_NVCAL		(1 <<  1)		/* Non valid Calendar */
+#define		AT91_RTC_NVTIMALR	(1 <<  2)		/* Non valid Time Alarm */
+#define		AT91_RTC_NVCALALR	(1 <<  3)		/* Non valid Calendar Alarm */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_rtt.h b/include/asm-arm/arch-at91/at91_rtt.h
new file mode 100644
index 0000000..bae1103
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_rtt.h
@@ -0,0 +1,32 @@
+/*
+ * include/asm-arm/arch-at91/at91_rtt.h
+ *
+ * Real-time Timer (RTT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_RTT_H
+#define AT91_RTT_H
+
+#define AT91_RTT_MR		(AT91_RTT + 0x00)	/* Real-time Mode Register */
+#define		AT91_RTT_RTPRES		(0xffff << 0)		/* Real-time Timer Prescaler Value */
+#define		AT91_RTT_ALMIEN		(1 << 16)		/* Alarm Interrupt Enable */
+#define		AT91_RTT_RTTINCIEN	(1 << 17)		/* Real Time Timer Increment Interrupt Enable */
+#define		AT91_RTT_RTTRST		(1 << 18)		/* Real Time Timer Restart */
+
+#define AT91_RTT_AR		(AT91_RTT + 0x04)	/* Real-time Alarm Register */
+#define		AT91_RTT_ALMV		(0xffffffff)		/* Alarm Value */
+
+#define AT91_RTT_VR		(AT91_RTT + 0x08)	/* Real-time Value Register */
+#define		AT91_RTT_CRTV		(0xffffffff)		/* Current Real-time Value */
+
+#define AT91_RTT_SR		(AT91_RTT + 0x0c)	/* Real-time Status Register */
+#define		AT91_RTT_ALMS		(1 << 0)		/* Real-time Alarm Status */
+#define		AT91_RTT_RTTINC		(1 << 1)		/* Real-time Timer Increment */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_shdwc.h b/include/asm-arm/arch-at91/at91_shdwc.h
new file mode 100644
index 0000000..795fcc2
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_shdwc.h
@@ -0,0 +1,33 @@
+/*
+ * include/asm-arm/arch-at91/at91_shdwc.h
+ *
+ * Shutdown Controller (SHDWC) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_SHDWC_H
+#define AT91_SHDWC_H
+
+#define AT91_SHDW_CR		(AT91_SHDWC + 0x00)	/* Shut Down Control Register */
+#define		AT91_SHDW_SHDW		(1    << 0)		/* Processor Reset */
+#define		AT91_SHDW_KEY		(0xff << 24)		/* KEY Password */
+
+#define AT91_SHDW_MR		(AT91_SHDWC + 0x04)	/* Shut Down Mode Register */
+#define		AT91_SHDW_WKMODE0	(3 << 0)		/* Wake-up 0 Mode Selection */
+#define			AT91_SHDW_WKMODE0_NONE		0
+#define			AT91_SHDW_WKMODE0_HIGH		1
+#define			AT91_SHDW_WKMODE0_LOW		2
+#define			AT91_SHDW_WKMODE0_ANYLEVEL	3
+#define		AT91_SHDW_CPTWK0	(0xf << 4)		/* Counter On Wake Up 0 */
+#define		AT91_SHDW_RTTWKEN	(1   << 16)		/* Real Time Timer Wake-up Enable */
+
+#define AT91_SHDW_SR		(AT91_SHDWC + 0x08)	/* Shut Down Status Register */
+#define		AT91_SHDW_WAKEUP0	(1 <<  0)		/* Wake-up 0 Status */
+#define		AT91_SHDW_RTTWK		(1 << 16)		/* Real-time Timer Wake-up */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_spi.h b/include/asm-arm/arch-at91/at91_spi.h
new file mode 100644
index 0000000..f9b9a84
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_spi.h
@@ -0,0 +1,81 @@
+/*
+ * include/asm-arm/arch-at91/at91_spi.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Serial Peripheral Interface (SPI) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_SPI_H
+#define AT91_SPI_H
+
+#define AT91_SPI_CR			0x00		/* Control Register */
+#define		AT91_SPI_SPIEN		(1 <<  0)		/* SPI Enable */
+#define		AT91_SPI_SPIDIS		(1 <<  1)		/* SPI Disable */
+#define		AT91_SPI_SWRST		(1 <<  7)		/* SPI Software Reset */
+#define		AT91_SPI_LASTXFER	(1 << 24)		/* Last Transfer [SAM9261 only] */
+
+#define AT91_SPI_MR			0x04		/* Mode Register */
+#define		AT91_SPI_MSTR		(1    <<  0)		/* Master/Slave Mode */
+#define		AT91_SPI_PS		(1    <<  1)		/* Peripheral Select */
+#define			AT91_SPI_PS_FIXED	(0 << 1)
+#define			AT91_SPI_PS_VARIABLE	(1 << 1)
+#define		AT91_SPI_PCSDEC		(1    <<  2)		/* Chip Select Decode */
+#define		AT91_SPI_DIV32		(1    <<  3)		/* Clock Selection [AT91RM9200 only] */
+#define		AT91_SPI_MODFDIS	(1    <<  4)		/* Mode Fault Detection */
+#define		AT91_SPI_LLB		(1    <<  7)		/* Local Loopback Enable */
+#define		AT91_SPI_PCS		(0xf  << 16)		/* Peripheral Chip Select */
+#define		AT91_SPI_DLYBCS		(0xff << 24)		/* Delay Between Chip Selects */
+
+#define AT91_SPI_RDR		0x08			/* Receive Data Register */
+#define		AT91_SPI_RD		(0xffff <<  0)		/* Receive Data */
+#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
+
+#define AT91_SPI_TDR		0x0c			/* Transmit Data Register */
+#define		AT91_SPI_TD		(0xffff <<  0)		/* Transmit Data */
+#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
+#define		AT91_SPI_LASTXFER	(1	<< 24)		/* Last Transfer [SAM9261 only] */
+
+#define AT91_SPI_SR		0x10			/* Status Register */
+#define		AT91_SPI_RDRF		(1 <<  0)		/* Receive Data Register Full */
+#define		AT91_SPI_TDRE		(1 <<  1)		/* Transmit Data Register Full */
+#define		AT91_SPI_MODF		(1 <<  2)		/* Mode Fault Error */
+#define		AT91_SPI_OVRES		(1 <<  3)		/* Overrun Error Status */
+#define		AT91_SPI_ENDRX		(1 <<  4)		/* End of RX buffer */
+#define		AT91_SPI_ENDTX		(1 <<  5)		/* End of TX buffer */
+#define		AT91_SPI_RXBUFF		(1 <<  6)		/* RX Buffer Full */
+#define		AT91_SPI_TXBUFE		(1 <<  7)		/* TX Buffer Empty */
+#define		AT91_SPI_NSSR		(1 <<  8)		/* NSS Rising [SAM9261 only] */
+#define		AT91_SPI_TXEMPTY	(1 <<  9)		/* Transmission Register Empty [SAM9261 only] */
+#define		AT91_SPI_SPIENS		(1 << 16)		/* SPI Enable Status */
+
+#define AT91_SPI_IER		0x14			/* Interrupt Enable Register */
+#define AT91_SPI_IDR		0x18			/* Interrupt Disable Register */
+#define AT91_SPI_IMR		0x1c			/* Interrupt Mask Register */
+
+#define AT91_SPI_CSR(n)		(0x30 + ((n) * 4))	/* Chip Select Registers 0-3 */
+#define		AT91_SPI_CPOL		(1    <<  0)		/* Clock Polarity */
+#define		AT91_SPI_NCPHA		(1    <<  1)		/* Clock Phase */
+#define		AT91_SPI_CSAAT		(1    <<  3)		/* Chip Select Active After Transfer [SAM9261 only] */
+#define		AT91_SPI_BITS		(0xf  <<  4)		/* Bits Per Transfer */
+#define			AT91_SPI_BITS_8		(0 << 4)
+#define			AT91_SPI_BITS_9		(1 << 4)
+#define			AT91_SPI_BITS_10	(2 << 4)
+#define			AT91_SPI_BITS_11	(3 << 4)
+#define			AT91_SPI_BITS_12	(4 << 4)
+#define			AT91_SPI_BITS_13	(5 << 4)
+#define			AT91_SPI_BITS_14	(6 << 4)
+#define			AT91_SPI_BITS_15	(7 << 4)
+#define			AT91_SPI_BITS_16	(8 << 4)
+#define		AT91_SPI_SCBR		(0xff <<  8)		/* Serial Clock Baud Rate */
+#define		AT91_SPI_DLYBS		(0xff << 16)		/* Delay before SPCK */
+#define		AT91_SPI_DLYBCT		(0xff << 24)		/* Delay between Consecutive Transfers */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_ssc.h b/include/asm-arm/arch-at91/at91_ssc.h
new file mode 100644
index 0000000..0ecc734
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_ssc.h
@@ -0,0 +1,106 @@
+/*
+ * include/asm-arm/arch-at91/at91_ssc.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Serial Synchronous Controller (SSC) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_SSC_H
+#define AT91_SSC_H
+
+#define AT91_SSC_CR		0x00	/* Control Register */
+#define		AT91_SSC_RXEN		(1 <<  0)	/* Receive Enable */
+#define		AT91_SSC_RXDIS		(1 <<  1)	/* Receive Disable */
+#define		AT91_SSC_TXEN		(1 <<  8)	/* Transmit Enable */
+#define		AT91_SSC_TXDIS		(1 <<  9)	/* Transmit Disable */
+#define		AT91_SSC_SWRST		(1 << 15)	/* Software Reset */
+
+#define AT91_SSC_CMR		0x04	/* Clock Mode Register */
+#define		AT91_SSC_CMR_DIV	(0xfff << 0)	/* Clock Divider */
+
+#define AT91_SSC_RCMR		0x10	/* Receive Clock Mode Register */
+#define		AT91_SSC_CKS		(3    <<  0)	/* Clock Selection */
+#define			AT91_SSC_CKS_DIV		(0 << 0)
+#define			AT91_SSC_CKS_CLOCK		(1 << 0)
+#define			AT91_SSC_CKS_PIN		(2 << 0)
+#define		AT91_SSC_CKO		(7    <<  2)	/* Clock Output Mode Selection */
+#define			AT91_SSC_CKO_NONE		(0 << 2)
+#define			AT91_SSC_CKO_CONTINUOUS		(1 << 2)
+#define		AT91_SSC_CKI		(1    <<  5)	/* Clock Inversion */
+#define			AT91_SSC_CKI_FALLING		(0 << 5)
+#define			AT91_SSC_CK_RISING		(1 << 5)
+#define		AT91_SSC_CKG		(1    <<  6)	/* Receive Clock Gating Selection [AT91SAM9261 only] */
+#define			AT91_SSC_CKG_NONE		(0 << 6)
+#define			AT91_SSC_CKG_RFLOW		(1 << 6)
+#define			AT91_SSC_CKG_RFHIGH		(2 << 6)
+#define		AT91_SSC_START		(0xf  <<  8)	/* Start Selection */
+#define			AT91_SSC_START_CONTINUOUS	(0 << 8)
+#define			AT91_SSC_START_TX_RX		(1 << 8)
+#define			AT91_SSC_START_LOW_RF		(2 << 8)
+#define			AT91_SSC_START_HIGH_RF		(3 << 8)
+#define			AT91_SSC_START_FALLING_RF	(4 << 8)
+#define			AT91_SSC_START_RISING_RF	(5 << 8)
+#define			AT91_SSC_START_LEVEL_RF		(6 << 8)
+#define			AT91_SSC_START_EDGE_RF		(7 << 8)
+#define		AT91_SSC_STOP		(1    << 12)	/* Receive Stop Selection [AT91SAM9261 only] */
+#define		AT91_SSC_STTDLY		(0xff << 16)	/* Start Delay */
+#define		AT91_SSC_PERIOD		(0xff << 24)	/* Period Divider Selection */
+
+#define AT91_SSC_RFMR		0x14	/* Receive Frame Mode Register */
+#define		AT91_SSC_DATALEN	(0x1f <<  0)	/* Data Length */
+#define		AT91_SSC_LOOP		(1    <<  5)	/* Loop Mode */
+#define		AT91_SSC_MSBF		(1    <<  7)	/* Most Significant Bit First */
+#define		AT91_SSC_DATNB		(0xf  <<  8)	/* Data Number per Frame */
+#define		AT91_SSC_FSLEN		(0xf  << 16)	/* Frame Sync Length */
+#define		AT91_SSC_FSOS		(7    << 20)	/* Frame Sync Output Selection */
+#define			AT91_SSC_FSOS_NONE		(0 << 20)
+#define			AT91_SSC_FSOS_NEGATIVE		(1 << 20)
+#define			AT91_SSC_FSOS_POSITIVE		(2 << 20)
+#define			AT91_SSC_FSOS_LOW		(3 << 20)
+#define			AT91_SSC_FSOS_HIGH		(4 << 20)
+#define			AT91_SSC_FSOS_TOGGLE		(5 << 20)
+#define		AT91_SSC_FSEDGE		(1    << 24)	/* Frame Sync Edge Detection */
+#define			AT91_SSC_FSEDGE_POSITIVE	(0 << 24)
+#define			AT91_SSC_FSEDGE_NEGATIVE	(1 << 24)
+
+#define AT91_SSC_TCMR		0x18	/* Transmit Clock Mode Register */
+#define AT91_SSC_TFMR		0x1c	/* Transmit Fram Mode Register */
+#define		AT91_SSC_DATDEF		(1 <<  5)	/* Data Default Value */
+#define		AT91_SSC_FSDEN		(1 << 23)	/* Frame Sync Data Enable */
+
+#define AT91_SSC_RHR		0x20	/* Receive Holding Register */
+#define AT91_SSC_THR		0x24	/* Transmit Holding Register */
+#define AT91_SSC_RSHR		0x30	/* Receive Sync Holding Register */
+#define AT91_SSC_TSHR		0x34	/* Transmit Sync Holding Register */
+
+#define AT91_SSC_RC0R		0x38	/* Receive Compare 0 Register [AT91SAM9261 only] */
+#define AT91_SSC_RC1R		0x3c	/* Receive Compare 1 Register [AT91SAM9261 only] */
+
+#define AT91_SSC_SR		0x40	/* Status Register */
+#define		AT91_SSC_TXRDY		(1 <<  0)	/* Transmit Ready */
+#define		AT91_SSC_TXEMPTY	(1 <<  1)	/* Transmit Empty */
+#define		AT91_SSC_ENDTX		(1 <<  2)	/* End of Transmission */
+#define		AT91_SSC_TXBUFE		(1 <<  3)	/* Transmit Buffer Empty */
+#define		AT91_SSC_RXRDY		(1 <<  4)	/* Receive Ready */
+#define		AT91_SSC_OVRUN		(1 <<  5)	/* Receive Overrun */
+#define		AT91_SSC_ENDRX		(1 <<  6)	/* End of Reception */
+#define		AT91_SSC_RXBUFF		(1 <<  7)	/* Receive Buffer Full */
+#define		AT91_SSC_CP0		(1 <<  8)	/* Compare 0 [AT91SAM9261 only] */
+#define		AT91_SSC_CP1		(1 <<  9)	/* Compare 1 [AT91SAM9261 only] */
+#define		AT91_SSC_TXSYN		(1 << 10)	/* Transmit Sync */
+#define		AT91_SSC_RXSYN		(1 << 11)	/* Receive Sync */
+#define		AT91_SSC_TXENA		(1 << 16)	/* Transmit Enable */
+#define		AT91_SSC_RXENA		(1 << 17)	/* Receive Enable */
+
+#define AT91_SSC_IER		0x44	/* Interrupt Enable Register */
+#define AT91_SSC_IDR		0x48	/* Interrupt Disable Register */
+#define AT91_SSC_IMR		0x4c	/* Interrupt Mask Register */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_st.h b/include/asm-arm/arch-at91/at91_st.h
new file mode 100644
index 0000000..30446e2e
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_st.h
@@ -0,0 +1,49 @@
+/*
+ * include/asm-arm/arch-at91/at91_st.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * System Timer (ST) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_ST_H
+#define AT91_ST_H
+
+#define	AT91_ST_CR		(AT91_ST + 0x00)	/* Control Register */
+#define 	AT91_ST_WDRST		(1 << 0)		/* Watchdog Timer Restart */
+
+#define	AT91_ST_PIMR		(AT91_ST + 0x04)	/* Period Interval Mode Register */
+#define		AT91_ST_PIV		(0xffff <<  0)		/* Period Interval Value */
+
+#define	AT91_ST_WDMR		(AT91_ST + 0x08)	/* Watchdog Mode Register */
+#define		AT91_ST_WDV		(0xffff <<  0)		/* Watchdog Counter Value */
+#define		AT91_ST_RSTEN		(1	<< 16)		/* Reset Enable */
+#define		AT91_ST_EXTEN		(1	<< 17)		/* External Signal Assertion Enable */
+
+#define	AT91_ST_RTMR		(AT91_ST + 0x0c)	/* Real-time Mode Register */
+#define		AT91_ST_RTPRES		(0xffff <<  0)		/* Real-time Prescalar Value */
+
+#define	AT91_ST_SR		(AT91_ST + 0x10)	/* Status Register */
+#define		AT91_ST_PITS		(1 << 0)		/* Period Interval Timer Status */
+#define		AT91_ST_WDOVF		(1 << 1) 		/* Watchdog Overflow */
+#define		AT91_ST_RTTINC		(1 << 2) 		/* Real-time Timer Increment */
+#define		AT91_ST_ALMS		(1 << 3) 		/* Alarm Status */
+
+#define	AT91_ST_IER		(AT91_ST + 0x14)	/* Interrupt Enable Register */
+#define	AT91_ST_IDR		(AT91_ST + 0x18)	/* Interrupt Disable Register */
+#define	AT91_ST_IMR		(AT91_ST + 0x1c)	/* Interrupt Mask Register */
+
+#define	AT91_ST_RTAR		(AT91_ST + 0x20)	/* Real-time Alarm Register */
+#define		AT91_ST_ALMV		(0xfffff << 0)		/* Alarm Value */
+
+#define	AT91_ST_CRTR		(AT91_ST + 0x24)	/* Current Real-time Register */
+#define		AT91_ST_CRTV		(0xfffff << 0)		/* Current Real-Time Value */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_tc.h b/include/asm-arm/arch-at91/at91_tc.h
new file mode 100644
index 0000000..b85d3fa
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_tc.h
@@ -0,0 +1,146 @@
+/*
+ * include/asm-arm/arch-at91/at91_tc.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Timer/Counter Unit (TC) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_TC_H
+#define AT91_TC_H
+
+#define AT91_TC_BCR		0xc0		/* TC Block Control Register */
+#define		AT91_TC_SYNC		(1 << 0)	/* Synchro Command */
+
+#define AT91_TC_BMR		0xc4		/* TC Block Mode Register */
+#define		AT91_TC_TC0XC0S		(3 << 0)	/* External Clock Signal 0 Selection */
+#define			AT91_TC_TC0XC0S_TCLK0		(0 << 0)
+#define			AT91_TC_TC0XC0S_NONE		(1 << 0)
+#define			AT91_TC_TC0XC0S_TIOA1		(2 << 0)
+#define			AT91_TC_TC0XC0S_TIOA2		(3 << 0)
+#define		AT91_TC_TC1XC1S		(3 << 2)	/* External Clock Signal 1 Selection */
+#define			AT91_TC_TC1XC1S_TCLK1		(0 << 2)
+#define			AT91_TC_TC1XC1S_NONE		(1 << 2)
+#define			AT91_TC_TC1XC1S_TIOA0		(2 << 2)
+#define			AT91_TC_TC1XC1S_TIOA2		(3 << 2)
+#define		AT91_TC_TC2XC2S		(3 << 4)	/* External Clock Signal 2 Selection */
+#define			AT91_TC_TC2XC2S_TCLK2		(0 << 4)
+#define			AT91_TC_TC2XC2S_NONE		(1 << 4)
+#define			AT91_TC_TC2XC2S_TIOA0		(2 << 4)
+#define			AT91_TC_TC2XC2S_TIOA1		(3 << 4)
+
+
+#define AT91_TC_CCR		0x00		/* Channel Control Register */
+#define		AT91_TC_CLKEN		(1 << 0)	/* Counter Clock Enable Command */
+#define		AT91_TC_CLKDIS		(1 << 1)	/* Counter CLock Disable Command */
+#define		AT91_TC_SWTRG		(1 << 2)	/* Software Trigger Command */
+
+#define AT91_TC_CMR		0x04		/* Channel Mode Register */
+#define		AT91_TC_TCCLKS		(7 << 0)	/* Capture/Waveform Mode: Clock Selection */
+#define			AT91_TC_TIMER_CLOCK1		(0 << 0)
+#define			AT91_TC_TIMER_CLOCK2		(1 << 0)
+#define			AT91_TC_TIMER_CLOCK3		(2 << 0)
+#define			AT91_TC_TIMER_CLOCK4		(3 << 0)
+#define			AT91_TC_TIMER_CLOCK5		(4 << 0)
+#define			AT91_TC_XC0			(5 << 0)
+#define			AT91_TC_XC1			(6 << 0)
+#define			AT91_TC_XC2			(7 << 0)
+#define		AT91_TC_CLKI		(1 << 3)	/* Capture/Waveform Mode: Clock Invert */
+#define		AT91_TC_BURST		(3 << 4)	/* Capture/Waveform Mode: Burst Signal Selection */
+#define		AT91_TC_LDBSTOP		(1 << 6)	/* Capture Mode: Counter Clock Stopped with TB Loading */
+#define		AT91_TC_LDBDIS		(1 << 7)	/* Capture Mode: Counter Clock Disable with RB Loading */
+#define		AT91_TC_ETRGEDG		(3 << 8)	/* Capture Mode: External Trigger Edge Selection */
+#define		AT91_TC_ABETRG		(1 << 10)	/* Capture Mode: TIOA or TIOB External Trigger Selection */
+#define		AT91_TC_CPCTRG		(1 << 14)	/* Capture Mode: RC Compare Trigger Enable */
+#define		AT91_TC_WAVE		(1 << 15)	/* Capture/Waveform mode */
+#define		AT91_TC_LDRA		(3 << 16)	/* Capture Mode: RA Loading Selection */
+#define		AT91_TC_LDRB		(3 << 18)	/* Capture Mode: RB Loading Selection */
+
+#define		AT91_TC_CPCSTOP		(1 <<  6)	/* Waveform Mode: Counter Clock Stopped with RC Compare */
+#define		AT91_TC_CPCDIS		(1 <<  7)	/* Waveform Mode: Counter Clock Disable with RC Compare */
+#define		AT91_TC_EEVTEDG		(3 <<  8)	/* Waveform Mode: External Event Edge Selection */
+#define			AT91_TC_EEVTEDG_NONE		(0 << 8)
+#define			AT91_TC_EEVTEDG_RISING		(1 << 8)
+#define			AT91_TC_EEVTEDG_FALLING		(2 << 8)
+#define			AT91_TC_EEVTEDG_BOTH		(3 << 8)
+#define		AT91_TC_EEVT		(3 << 10)	/* Waveform Mode: External Event Selection */
+#define			AT91_TC_EEVT_TIOB		(0 << 10)
+#define			AT91_TC_EEVT_XC0		(1 << 10)
+#define			AT91_TC_EEVT_XC1		(2 << 10)
+#define			AT91_TC_EEVT_XC2		(3 << 10)
+#define		AT91_TC_ENETRG		(1 << 12)	/* Waveform Mode: External Event Trigger Enable */
+#define		AT91_TC_WAVESEL		(3 << 13)	/* Waveform Mode: Waveform Selection */
+#define			AT91_TC_WAVESEL_UP		(0 << 13)
+#define			AT91_TC_WAVESEL_UP_AUTO		(2 << 13)
+#define			AT91_TC_WAVESEL_UPDOWN		(1 << 13)
+#define			AT91_TC_WAVESEL_UPDOWN_AUTO	(3 << 13)
+#define		AT91_TC_ACPA		(3 << 16)	/* Waveform Mode: RA Compare Effect on TIOA */
+#define			AT91_TC_ACPA_NONE		(0 << 16)
+#define			AT91_TC_ACPA_SET		(1 << 16)
+#define			AT91_TC_ACPA_CLEAR		(2 << 16)
+#define			AT91_TC_ACPA_TOGGLE		(3 << 16)
+#define		AT91_TC_ACPC		(3 << 18)	/* Waveform Mode: RC Compre Effect on TIOA */
+#define			AT91_TC_ACPC_NONE		(0 << 18)
+#define			AT91_TC_ACPC_SET		(1 << 18)
+#define			AT91_TC_ACPC_CLEAR		(2 << 18)
+#define			AT91_TC_ACPC_TOGGLE		(3 << 18)
+#define		AT91_TC_AEEVT		(3 << 20)	/* Waveform Mode: External Event Effect on TIOA */
+#define			AT91_TC_AEEVT_NONE		(0 << 20)
+#define			AT91_TC_AEEVT_SET		(1 << 20)
+#define			AT91_TC_AEEVT_CLEAR		(2 << 20)
+#define			AT91_TC_AEEVT_TOGGLE		(3 << 20)
+#define		AT91_TC_ASWTRG		(3 << 22)	/* Waveform Mode: Software Trigger Effect on TIOA */
+#define			AT91_TC_ASWTRG_NONE		(0 << 22)
+#define			AT91_TC_ASWTRG_SET		(1 << 22)
+#define			AT91_TC_ASWTRG_CLEAR		(2 << 22)
+#define			AT91_TC_ASWTRG_TOGGLE		(3 << 22)
+#define		AT91_TC_BCPB		(3 << 24)	/* Waveform Mode: RB Compare Effect on TIOB */
+#define			AT91_TC_BCPB_NONE		(0 << 24)
+#define			AT91_TC_BCPB_SET		(1 << 24)
+#define			AT91_TC_BCPB_CLEAR		(2 << 24)
+#define			AT91_TC_BCPB_TOGGLE		(3 << 24)
+#define		AT91_TC_BCPC		(3 << 26)	/* Waveform Mode: RC Compare Effect on TIOB */
+#define			AT91_TC_BCPC_NONE		(0 << 26)
+#define			AT91_TC_BCPC_SET		(1 << 26)
+#define			AT91_TC_BCPC_CLEAR		(2 << 26)
+#define			AT91_TC_BCPC_TOGGLE		(3 << 26)
+#define		AT91_TC_BEEVT		(3 << 28)	/* Waveform Mode: External Event Effect on TIOB */
+#define			AT91_TC_BEEVT_NONE		(0 << 28)
+#define			AT91_TC_BEEVT_SET		(1 << 28)
+#define			AT91_TC_BEEVT_CLEAR		(2 << 28)
+#define			AT91_TC_BEEVT_TOGGLE		(3 << 28)
+#define		AT91_TC_BSWTRG		(3 << 30)	/* Waveform Mode: Software Trigger Effect on TIOB */
+#define			AT91_TC_BSWTRG_NONE		(0 << 30)
+#define			AT91_TC_BSWTRG_SET		(1 << 30)
+#define			AT91_TC_BSWTRG_CLEAR		(2 << 30)
+#define			AT91_TC_BSWTRG_TOGGLE		(3 << 30)
+
+#define AT91_TC_CV		0x10		/* Counter Value */
+#define AT91_TC_RA		0x14		/* Register A */
+#define AT91_TC_RB		0x18		/* Register B */
+#define AT91_TC_RC		0x1c		/* Register C */
+
+#define AT91_TC_SR		0x20		/* Status Register */
+#define		AT91_TC_COVFS		(1 <<  0)	/* Counter Overflow Status */
+#define		AT91_TC_LOVRS		(1 <<  1)	/* Load Overrun Status */
+#define		AT91_TC_CPAS		(1 <<  2)	/* RA Compare Status */
+#define		AT91_TC_CPBS		(1 <<  3)	/* RB Compare Status */
+#define		AT91_TC_CPCS		(1 <<  4)	/* RC Compare Status */
+#define		AT91_TC_LDRAS		(1 <<  5)	/* RA Loading Status */
+#define		AT91_TC_LDRBS		(1 <<  6)	/* RB Loading Status */
+#define		AT91_TC_ETRGS		(1 <<  7)	/* External Trigger Status */
+#define		AT91_TC_CLKSTA		(1 << 16)	/* Clock Enabling Status */
+#define		AT91_TC_MTIOA		(1 << 17)	/* TIOA Mirror */
+#define		AT91_TC_MTIOB		(1 << 18)	/* TIOB Mirror */
+
+#define AT91_TC_IER		0x24		/* Interrupt Enable Register */
+#define AT91_TC_IDR		0x28		/* Interrupt Disable Register */
+#define AT91_TC_IMR		0x2c		/* Interrupt Mask Register */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_twi.h b/include/asm-arm/arch-at91/at91_twi.h
new file mode 100644
index 0000000..ca9a907
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_twi.h
@@ -0,0 +1,57 @@
+/*
+ * include/asm-arm/arch-at91/at91_twi.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Two-wire Interface (TWI) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_TWI_H
+#define AT91_TWI_H
+
+#define	AT91_TWI_CR		0x00		/* Control Register */
+#define		AT91_TWI_START		(1 <<  0)	/* Send a Start Condition */
+#define		AT91_TWI_STOP		(1 <<  1)	/* Send a Stop Condition */
+#define		AT91_TWI_MSEN		(1 <<  2)	/* Master Transfer Enable */
+#define		AT91_TWI_MSDIS		(1 <<  3)	/* Master Transfer Disable */
+#define		AT91_TWI_SWRST		(1 <<  7)	/* Software Reset */
+
+#define	AT91_TWI_MMR		0x04		/* Master Mode Register */
+#define		AT91_TWI_IADRSZ		(3    <<  8)	/* Internal Device Address Size */
+#define			AT91_TWI_IADRSZ_NO		(0 << 8)
+#define			AT91_TWI_IADRSZ_1		(1 << 8)
+#define			AT91_TWI_IADRSZ_2		(2 << 8)
+#define			AT91_TWI_IADRSZ_3		(3 << 8)
+#define		AT91_TWI_MREAD		(1    << 12)	/* Master Read Direction */
+#define		AT91_TWI_DADR		(0x7f << 16)	/* Device Address */
+
+#define	AT91_TWI_IADR		0x0c		/* Internal Address Register */
+
+#define	AT91_TWI_CWGR		0x10		/* Clock Waveform Generator Register */
+#define		AT91_TWI_CLDIV		(0xff <<  0)	/* Clock Low Divisor */
+#define		AT91_TWI_CHDIV		(0xff <<  8)	/* Clock High Divisor */
+#define		AT91_TWI_CKDIV		(7    << 16)	/* Clock Divider */
+
+#define	AT91_TWI_SR		0x20		/* Status Register */
+#define		AT91_TWI_TXCOMP		(1 <<  0)	/* Transmission Complete */
+#define		AT91_TWI_RXRDY		(1 <<  1)	/* Receive Holding Register Ready */
+#define		AT91_TWI_TXRDY		(1 <<  2)	/* Transmit Holding Register Ready */
+#define		AT91_TWI_OVRE		(1 <<  6)	/* Overrun Error [AT91RM9200 only] */
+#define		AT91_TWI_UNRE		(1 <<  7)	/* Underrun Error [AT91RM9200 only] */
+#define		AT91_TWI_NACK		(1 <<  8)	/* Not Acknowledged */
+
+#define	AT91_TWI_IER		0x24		/* Interrupt Enable Register */
+#define	AT91_TWI_IDR		0x28		/* Interrupt Disable Register */
+#define	AT91_TWI_IMR		0x2c		/* Interrupt Mask Register */
+#define	AT91_TWI_RHR		0x30		/* Receive Holding Register */
+#define	AT91_TWI_THR		0x34		/* Transmit Holding Register */
+
+#endif
+
diff --git a/include/asm-arm/arch-at91/at91_wdt.h b/include/asm-arm/arch-at91/at91_wdt.h
new file mode 100644
index 0000000..7251a34
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_wdt.h
@@ -0,0 +1,34 @@
+/*
+ * include/asm-arm/arch-at91/at91_wdt.h
+ *
+ * Watchdog Timer (WDT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_WDT_H
+#define AT91_WDT_H
+
+#define AT91_WDT_CR		(AT91_WDT + 0x00)	/* Watchdog Control Register */
+#define		AT91_WDT_WDRSTT		(1    << 0)		/* Restart */
+#define		AT91_WDT_KEY		(0xff << 24)		/* KEY Password */
+
+#define AT91_WDT_MR		(AT91_WDT + 0x04)	/* Watchdog Mode Register */
+#define		AT91_WDT_WDV		(0xfff << 0)		/* Counter Value */
+#define		AT91_WDT_WDFIEN		(1     << 12)		/* Fault Interrupt Enable */
+#define		AT91_WDT_WDRSTEN	(1     << 13)		/* Reset Processor */
+#define		AT91_WDT_WDRPROC	(1     << 14)		/* Timer Restart */
+#define		AT91_WDT_WDDIS		(1     << 15)		/* Watchdog Disable */
+#define		AT91_WDT_WDD		(0xfff << 16)		/* Delta Value */
+#define		AT91_WDT_WDDBGHLT	(1     << 28)		/* Debug Halt */
+#define		AT91_WDT_WDIDLEHLT	(1     << 29)		/* Idle Halt */
+
+#define AT91_WDT_SR		(AT91_WDT + 0x08)	/* Watchdog Status Register */
+#define		AT91_WDT_WDUNF		(1 << 0)		/* Watchdog Underflow */
+#define		AT91_WDT_WDERR		(1 << 1)		/* Watchdog Error */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91rm9200.h b/include/asm-arm/arch-at91/at91rm9200.h
new file mode 100644
index 0000000..a12ac8a
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91rm9200.h
@@ -0,0 +1,291 @@
+/*
+ * include/asm-arm/arch-at91/at91rm9200.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Common definitions.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_H
+#define AT91RM9200_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripheral */
+#define AT91RM9200_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91RM9200_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91RM9200_ID_PIOC	4	/* Parallel IO Controller C */
+#define AT91RM9200_ID_PIOD	5	/* Parallel IO Controller D */
+#define AT91RM9200_ID_US0	6	/* USART 0 */
+#define AT91RM9200_ID_US1	7	/* USART 1 */
+#define AT91RM9200_ID_US2	8	/* USART 2 */
+#define AT91RM9200_ID_US3	9	/* USART 3 */
+#define AT91RM9200_ID_MCI	10	/* Multimedia Card Interface */
+#define AT91RM9200_ID_UDP	11	/* USB Device Port */
+#define AT91RM9200_ID_TWI	12	/* Two-Wire Interface */
+#define AT91RM9200_ID_SPI	13	/* Serial Peripheral Interface */
+#define AT91RM9200_ID_SSC0	14	/* Serial Synchronous Controller 0 */
+#define AT91RM9200_ID_SSC1	15	/* Serial Synchronous Controller 1 */
+#define AT91RM9200_ID_SSC2	16	/* Serial Synchronous Controller 2 */
+#define AT91RM9200_ID_TC0	17	/* Timer Counter 0 */
+#define AT91RM9200_ID_TC1	18	/* Timer Counter 1 */
+#define AT91RM9200_ID_TC2	19	/* Timer Counter 2 */
+#define AT91RM9200_ID_TC3	20	/* Timer Counter 3 */
+#define AT91RM9200_ID_TC4	21	/* Timer Counter 4 */
+#define AT91RM9200_ID_TC5	22	/* Timer Counter 5 */
+#define AT91RM9200_ID_UHP	23	/* USB Host port */
+#define AT91RM9200_ID_EMAC	24	/* Ethernet MAC */
+#define AT91RM9200_ID_IRQ0	25	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91RM9200_ID_IRQ1	26	/* Advanced Interrupt Controller (IRQ1) */
+#define AT91RM9200_ID_IRQ2	27	/* Advanced Interrupt Controller (IRQ2) */
+#define AT91RM9200_ID_IRQ3	28	/* Advanced Interrupt Controller (IRQ3) */
+#define AT91RM9200_ID_IRQ4	29	/* Advanced Interrupt Controller (IRQ4) */
+#define AT91RM9200_ID_IRQ5	30	/* Advanced Interrupt Controller (IRQ5) */
+#define AT91RM9200_ID_IRQ6	31	/* Advanced Interrupt Controller (IRQ6) */
+
+
+/*
+ * Peripheral physical base addresses.
+ */
+#define AT91RM9200_BASE_TCB0	0xfffa0000
+#define AT91RM9200_BASE_TC0	0xfffa0000
+#define AT91RM9200_BASE_TC1	0xfffa0040
+#define AT91RM9200_BASE_TC2	0xfffa0080
+#define AT91RM9200_BASE_TCB1	0xfffa4000
+#define AT91RM9200_BASE_TC3	0xfffa4000
+#define AT91RM9200_BASE_TC4	0xfffa4040
+#define AT91RM9200_BASE_TC5	0xfffa4080
+#define AT91RM9200_BASE_UDP	0xfffb0000
+#define AT91RM9200_BASE_MCI	0xfffb4000
+#define AT91RM9200_BASE_TWI	0xfffb8000
+#define AT91RM9200_BASE_EMAC	0xfffbc000
+#define AT91RM9200_BASE_US0	0xfffc0000
+#define AT91RM9200_BASE_US1	0xfffc4000
+#define AT91RM9200_BASE_US2	0xfffc8000
+#define AT91RM9200_BASE_US3	0xfffcc000
+#define AT91RM9200_BASE_SSC0	0xfffd0000
+#define AT91RM9200_BASE_SSC1	0xfffd4000
+#define AT91RM9200_BASE_SSC2	0xfffd8000
+#define AT91RM9200_BASE_SPI	0xfffe0000
+#define AT91_BASE_SYS		0xfffff000
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)	/* Advanced Interrupt Controller */
+#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)	/* Debug Unit */
+#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)	/* PIO Controller A */
+#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)	/* PIO Controller B */
+#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)	/* PIO Controller C */
+#define AT91_PIOD	(0xfffffa00 - AT91_BASE_SYS)	/* PIO Controller D */
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)	/* Power Management Controller */
+#define AT91_ST		(0xfffffd00 - AT91_BASE_SYS)	/* System Timer */
+#define AT91_RTC	(0xfffffe00 - AT91_BASE_SYS)	/* Real-Time Clock */
+#define AT91_MC		(0xffffff00 - AT91_BASE_SYS)	/* Memory Controllers */
+
+#define AT91_MATRIX	0	/* not supported */
+
+/*
+ * Internal Memory.
+ */
+#define AT91RM9200_ROM_BASE	0x00100000	/* Internal ROM base address */
+#define AT91RM9200_ROM_SIZE	SZ_128K		/* Internal ROM size (128Kb) */
+
+#define AT91RM9200_SRAM_BASE	0x00200000	/* Internal SRAM base address */
+#define AT91RM9200_SRAM_SIZE	SZ_16K		/* Internal SRAM size (16Kb) */
+
+#define AT91RM9200_UHP_BASE	0x00300000	/* USB Host controller */
+
+
+#if 0
+/*
+ * PIO pin definitions (peripheral A/B multiplexing).
+ */
+#define AT91_PA0_MISO		(1 <<  0)	/* A: SPI Master-In Slave-Out */
+#define AT91_PA0_PCK3		(1 <<  0)	/* B: PMC Programmable Clock Output 3 */
+#define AT91_PA1_MOSI		(1 <<  1)	/* A: SPI Master-Out Slave-In */
+#define AT91_PA1_PCK0		(1 <<  1)	/* B: PMC Programmable Clock Output 0 */
+#define AT91_PA2_SPCK		(1 <<  2)	/* A: SPI Serial Clock */
+#define AT91_PA2_IRQ4		(1 <<  2)	/* B: External Interrupt 4 */
+#define AT91_PA3_NPCS0		(1 <<  3)	/* A: SPI Peripheral Chip Select 0 */
+#define AT91_PA3_IRQ5		(1 <<  3)	/* B: External Interrupt 5 */
+#define AT91_PA4_NPCS1		(1 <<  4)	/* A: SPI Peripheral Chip Select 1 */
+#define AT91_PA4_PCK1		(1 <<  4)	/* B: PMC Programmable Clock Output 1 */
+#define AT91_PA5_NPCS2		(1 <<  5)	/* A: SPI Peripheral Chip Select 2 */
+#define AT91_PA5_TXD3		(1 <<  5)	/* B: USART Transmit Data 3 */
+#define AT91_PA6_NPCS3		(1 <<  6)	/* A: SPI Peripheral Chip Select 3 */
+#define AT91_PA6_RXD3		(1 <<  6)	/* B: USART Receive Data 3 */
+#define AT91_PA7_ETXCK_EREFCK	(1 <<  7)	/* A: Ethernet Reference Clock / Transmit Clock */
+#define AT91_PA7_PCK2		(1 <<  7)	/* B: PMC Programmable Clock Output 2 */
+#define AT91_PA8_ETXEN		(1 <<  8)	/* A: Ethernet Transmit Enable */
+#define AT91_PA8_MCCDB		(1 <<  8)	/* B: MMC Multimedia Card B Command */
+#define AT91_PA9_ETX0		(1 <<  9)	/* A: Ethernet Transmit Data 0 */
+#define AT91_PA9_MCDB0		(1 <<  9)	/* B: MMC Multimedia Card B Data 0 */
+#define AT91_PA10_ETX1		(1 << 10)	/* A: Ethernet Transmit Data 1 */
+#define AT91_PA10_MCDB1		(1 << 10)	/* B: MMC Multimedia Card B Data 1 */
+#define AT91_PA11_ECRS_ECRSDV	(1 << 11)	/* A: Ethernet Carrier Sense / Data Valid */
+#define AT91_PA11_MCDB2		(1 << 11)	/* B: MMC Multimedia Card B Data 2 */
+#define AT91_PA12_ERX0		(1 << 12)	/* A: Ethernet Receive Data 0 */
+#define AT91_PA12_MCDB3		(1 << 12)	/* B: MMC Multimedia Card B Data 3 */
+#define AT91_PA13_ERX1		(1 << 13)	/* A: Ethernet Receive Data 1 */
+#define AT91_PA13_TCLK0		(1 << 13)	/* B: TC External Clock Input 0 */
+#define AT91_PA14_ERXER		(1 << 14)	/* A: Ethernet Receive Error */
+#define AT91_PA14_TCLK1		(1 << 14)	/* B: TC External Clock Input 1 */
+#define AT91_PA15_EMDC		(1 << 15)	/* A: Ethernet Management Data Clock */
+#define AT91_PA15_TCLK2		(1 << 15)	/* B: TC External Clock Input 2 */
+#define AT91_PA16_EMDIO		(1 << 16)	/* A: Ethernet Management Data I/O */
+#define AT91_PA16_IRQ6		(1 << 16)	/* B: External Interrupt 6 */
+#define AT91_PA17_TXD0		(1 << 17)	/* A: USART Transmit Data 0 */
+#define AT91_PA17_TIOA0		(1 << 17)	/* B: TC I/O Line A 0 */
+#define AT91_PA18_RXD0		(1 << 18)	/* A: USART Receive Data 0 */
+#define AT91_PA18_TIOB0		(1 << 18)	/* B: TC I/O Line B 0 */
+#define AT91_PA19_SCK0		(1 << 19)	/* A: USART Serial Clock 0 */
+#define AT91_PA19_TIOA1		(1 << 19)	/* B: TC I/O Line A 1 */
+#define AT91_PA20_CTS0		(1 << 20)	/* A: USART Clear To Send 0 */
+#define AT91_PA20_TIOB1		(1 << 20)	/* B: TC I/O Line B 1 */
+#define AT91_PA21_RTS0		(1 << 21)	/* A: USART Ready To Send 0 */
+#define AT91_PA21_TIOA2		(1 << 21)	/* B: TC I/O Line A 2 */
+#define AT91_PA22_RXD2		(1 << 22)	/* A: USART Receive Data 2 */
+#define AT91_PA22_TIOB2		(1 << 22)	/* B: TC I/O Line B 2 */
+#define AT91_PA23_TXD2		(1 << 23)	/* A: USART Transmit Data 2 */
+#define AT91_PA23_IRQ3		(1 << 23)	/* B: External Interrupt 3 */
+#define AT91_PA24_SCK2		(1 << 24)	/* A: USART Serial Clock 2 */
+#define AT91_PA24_PCK1		(1 << 24)	/* B: PMC Programmable Clock Output 1 */
+#define AT91_PA25_TWD		(1 << 25)	/* A: TWI Two-wire Serial Data */
+#define AT91_PA25_IRQ2		(1 << 25)	/* B: External Interrupt 2 */
+#define AT91_PA26_TWCK		(1 << 26)	/* A: TWI Two-wire Serial Clock */
+#define AT91_PA26_IRQ1		(1 << 26)	/* B: External Interrupt 1 */
+#define AT91_PA27_MCCK		(1 << 27)	/* A: MMC Multimedia Card Clock */
+#define AT91_PA27_TCLK3		(1 << 27)	/* B: TC External Clock Input 3 */
+#define AT91_PA28_MCCDA		(1 << 28)	/* A: MMC Multimedia Card A Command */
+#define AT91_PA28_TCLK4		(1 << 28)	/* B: TC External Clock Input 4 */
+#define AT91_PA29_MCDA0		(1 << 29)	/* A: MMC Multimedia Card A Data 0 */
+#define AT91_PA29_TCLK5		(1 << 29)	/* B: TC External Clock Input 5 */
+#define AT91_PA30_DRXD		(1 << 30)	/* A: DBGU Receive Data */
+#define AT91_PA30_CTS2		(1 << 30)	/* B: USART Clear To Send 2 */
+#define AT91_PA31_DTXD		(1 << 31)	/* A: DBGU Transmit Data */
+#define AT91_PA31_RTS2		(1 << 31)	/* B: USART Ready To Send 2 */
+
+#define AT91_PB0_TF0		(1 <<  0)	/* A: SSC Transmit Frame Sync 0 */
+#define AT91_PB0_RTS3		(1 <<  0)	/* B: USART Ready To Send 3 */
+#define AT91_PB1_TK0		(1 <<  1)	/* A: SSC Transmit Clock 0 */
+#define AT91_PB1_CTS3		(1 <<  1)	/* B: USART Clear To Send 3 */
+#define AT91_PB2_TD0		(1 <<  2)	/* A: SSC Transmit Data 0 */
+#define AT91_PB2_SCK3		(1 <<  2)	/* B: USART Serial Clock 3 */
+#define AT91_PB3_RD0		(1 <<  3)	/* A: SSC Receive Data 0 */
+#define AT91_PB3_MCDA1		(1 <<  3)	/* B: MMC Multimedia Card A Data 1 */
+#define AT91_PB4_RK0		(1 <<  4)	/* A: SSC Receive Clock 0 */
+#define AT91_PB4_MCDA2		(1 <<  4)	/* B: MMC Multimedia Card A Data 2 */
+#define AT91_PB5_RF0		(1 <<  5)	/* A: SSC Receive Frame Sync 0 */
+#define AT91_PB5_MCDA3		(1 <<  5)	/* B: MMC Multimedia Card A Data 3 */
+#define AT91_PB6_TF1		(1 <<  6)	/* A: SSC Transmit Frame Sync 1 */
+#define AT91_PB6_TIOA3		(1 <<  6)	/* B: TC I/O Line A 3 */
+#define AT91_PB7_TK1		(1 <<  7)	/* A: SSC Transmit Clock 1 */
+#define AT91_PB7_TIOB3		(1 <<  7)	/* B: TC I/O Line B 3 */
+#define AT91_PB8_TD1		(1 <<  8)	/* A: SSC Transmit Data 1 */
+#define AT91_PB8_TIOA4		(1 <<  8)	/* B: TC I/O Line A 4 */
+#define AT91_PB9_RD1		(1 <<  9)	/* A: SSC Receive Data 1 */
+#define AT91_PB9_TIOB4		(1 <<  9)	/* B: TC I/O Line B 4 */
+#define AT91_PB10_RK1		(1 << 10)	/* A: SSC Receive Clock 1 */
+#define AT91_PB10_TIOA5		(1 << 10)	/* B: TC I/O Line A 5 */
+#define AT91_PB11_RF1		(1 << 11)	/* A: SSC Receive Frame Sync 1 */
+#define AT91_PB11_TIOB5		(1 << 11)	/* B: TC I/O Line B 5 */
+#define AT91_PB12_TF2		(1 << 12)	/* A: SSC Transmit Frame Sync 2 */
+#define AT91_PB12_ETX2		(1 << 12)	/* B: Ethernet Transmit Data 2 */
+#define AT91_PB13_TK2		(1 << 13)	/* A: SSC Transmit Clock 3 */
+#define AT91_PB13_ETX3		(1 << 13)	/* B: Ethernet Transmit Data 3 */
+#define AT91_PB14_TD2		(1 << 14)	/* A: SSC Transmit Data 2 */
+#define AT91_PB14_ETXER		(1 << 14)	/* B: Ethernet Transmit Coding Error */
+#define AT91_PB15_RD2		(1 << 15)	/* A: SSC Receive Data 2 */
+#define AT91_PB15_ERX2		(1 << 15)	/* B: Ethernet Receive Data 2 */
+#define AT91_PB16_RK2		(1 << 16)	/* A: SSC Receive Clock 2 */
+#define AT91_PB16_ERX3		(1 << 16)	/* B: Ethernet Receive Data 3 */
+#define AT91_PB17_RF2		(1 << 17)	/* A: SSC Receive Frame Sync 2 */
+#define AT91_PB17_ERXDV		(1 << 17)	/* B: Ethernet Receive Data Valid */
+#define AT91_PB18_RI1		(1 << 18)	/* A: USART Ring Indicator 1 */
+#define AT91_PB18_ECOL		(1 << 18)	/* B: Ethernet Collision Detected */
+#define AT91_PB19_DTR1		(1 << 19)	/* A: USART Data Terminal Ready 1 */
+#define AT91_PB19_ERXCK		(1 << 19)	/* B: Ethernet Receive Clock */
+#define AT91_PB20_TXD1		(1 << 20)	/* A: USART Transmit Data 1 */
+#define AT91_PB21_RXD1		(1 << 21)	/* A: USART Receive Data 1 */
+#define AT91_PB22_SCK1		(1 << 22)	/* A: USART Serial Clock 1 */
+#define AT91_PB23_DCD1		(1 << 23)	/* A: USART Data Carrier Detect 1 */
+#define AT91_PB24_CTS1		(1 << 24)	/* A: USART Clear To Send 1 */
+#define AT91_PB25_DSR1		(1 << 25)	/* A: USART Data Set Ready 1 */
+#define AT91_PB25_EF100		(1 << 25)	/* B: Ethernet Force 100 Mbit */
+#define AT91_PB26_RTS1		(1 << 26)	/* A: USART Ready To Send 1 */
+#define AT91_PB27_PCK0		(1 << 27)	/* B: PMC Programmable Clock Output 0 */
+#define AT91_PB28_FIQ		(1 << 28)	/* A: Fast Interrupt */
+#define AT91_PB29_IRQ0		(1 << 29)	/* A: External Interrupt 0 */
+
+#define AT91_PC0_BFCK		(1 <<  0)	/* A: Burst Flash Clock */
+#define AT91_PC1_BFRDY_SMOE	(1 <<  1)	/* A: Burst Flash Ready / SmartMedia Output Enable */
+#define AT91_PC2_BFAVD		(1 <<  2)	/* A: Burst Flash Address Valid */
+#define AT91_PC3_BFBAA_SMWE	(1 <<  3)	/* A: Burst Flash Address Advance / SmartMedia Write Enable */
+#define AT91_PC4_BFOE		(1 <<  4)	/* A: Burst Flash Output Enable */
+#define AT91_PC5_BFWE		(1 <<  5)	/* A: Burst Flash Write Enable */
+#define AT91_PC6_NWAIT		(1 <<  6)	/* A: SMC Wait Signal */
+#define AT91_PC7_A23		(1 <<  7)	/* A: Address Bus 23 */
+#define AT91_PC8_A24		(1 <<  8)	/* A: Address Bus 24 */
+#define AT91_PC9_A25_CFRNW	(1 <<  9)	/* A: Address Bus 25 / Compact Flash Read Not Write */
+#define AT91_PC10_NCS4_CFCS	(1 << 10)	/* A: SMC Chip Select 4 / Compact Flash Chip Select */
+#define AT91_PC11_NCS5_CFCE1	(1 << 11)	/* A: SMC Chip Select 5 / Compact Flash Chip Enable 1 */
+#define AT91_PC12_NCS6_CFCE2	(1 << 12)	/* A: SMC Chip Select 6 / Compact Flash Chip Enable 2 */
+#define AT91_PC13_NCS7		(1 << 13)	/* A: Chip Select 7 */
+
+#define AT91_PD0_ETX0		(1 <<  0)	/* A: Ethernet Transmit Data 0 */
+#define AT91_PD1_ETX1		(1 <<  1)	/* A: Ethernet Transmit Data 1 */
+#define AT91_PD2_ETX2		(1 <<  2)	/* A: Ethernet Transmit Data 2 */
+#define AT91_PD3_ETX3		(1 <<  3)	/* A: Ethernet Transmit Data 3 */
+#define AT91_PD4_ETXEN		(1 <<  4)	/* A: Ethernet Transmit Enable */
+#define AT91_PD5_ETXER		(1 <<  5)	/* A: Ethernet Transmit Coding Error */
+#define AT91_PD6_DTXD		(1 <<  6)	/* A: DBGU Transmit Data */
+#define AT91_PD7_PCK0		(1 <<  7)	/* A: PMC Programmable Clock Output 0 */
+#define AT91_PD7_TSYNC		(1 <<  7)	/* B: ETM Trace Synchronization Signal */
+#define AT91_PD8_PCK1		(1 <<  8)	/* A: PMC Programmable Clock Output 1 */
+#define AT91_PD8_TCLK		(1 <<  8)	/* B: ETM Trace Clock */
+#define AT91_PD9_PCK2		(1 <<  9)	/* A: PMC Programmable Clock Output 2 */
+#define AT91_PD9_TPS0		(1 <<  9)	/* B: ETM Trace ARM Pipeline Status 0 */
+#define AT91_PD10_PCK3		(1 << 10)	/* A: PMC Programmable Clock Output 3 */
+#define AT91_PD10_TPS1		(1 << 10)	/* B: ETM Trace ARM Pipeline Status 1 */
+#define AT91_PD11_TPS2		(1 << 11)	/* B: ETM Trace ARM Pipeline Status 2 */
+#define AT91_PD12_TPK0		(1 << 12)	/* B: ETM Trace Packet Port 0 */
+#define AT91_PD13_TPK1		(1 << 13)	/* B: ETM Trace Packet Port 1 */
+#define AT91_PD14_TPK2		(1 << 14)	/* B: ETM Trace Packet Port 2 */
+#define AT91_PD15_TD0		(1 << 15)	/* A: SSC Transmit Data 0 */
+#define AT91_PD15_TPK3		(1 << 15)	/* B: ETM Trace Packet Port 3 */
+#define AT91_PD16_TD1		(1 << 16)	/* A: SSC Transmit Data 1 */
+#define AT91_PD16_TPK4		(1 << 16)	/* B: ETM Trace Packet Port 4 */
+#define AT91_PD17_TD2		(1 << 17)	/* A: SSC Transmit Data 2 */
+#define AT91_PD17_TPK5		(1 << 17)	/* B: ETM Trace Packet Port 5 */
+#define AT91_PD18_NPCS1		(1 << 18)	/* A: SPI Peripheral Chip Select 1 */
+#define AT91_PD18_TPK6		(1 << 18)	/* B: ETM Trace Packet Port 6 */
+#define AT91_PD19_NPCS2		(1 << 19)	/* A: SPI Peripheral Chip Select 2 */
+#define AT91_PD19_TPK7		(1 << 19)	/* B: ETM Trace Packet Port 7 */
+#define AT91_PD20_NPCS3		(1 << 20)	/* A: SPI Peripheral Chip Select 3 */
+#define AT91_PD20_TPK8		(1 << 20)	/* B: ETM Trace Packet Port 8 */
+#define AT91_PD21_RTS0		(1 << 21)	/* A: USART Ready To Send 0 */
+#define AT91_PD21_TPK9		(1 << 21)	/* B: ETM Trace Packet Port 9 */
+#define AT91_PD22_RTS1		(1 << 22)	/* A: USART Ready To Send 1 */
+#define AT91_PD22_TPK10		(1 << 22)	/* B: ETM Trace Packet Port 10 */
+#define AT91_PD23_RTS2		(1 << 23)	/* A: USART Ready To Send 2 */
+#define AT91_PD23_TPK11		(1 << 23)	/* B: ETM Trace Packet Port 11 */
+#define AT91_PD24_RTS3		(1 << 24)	/* A: USART Ready To Send 3 */
+#define AT91_PD24_TPK12		(1 << 24)	/* B: ETM Trace Packet Port 12 */
+#define AT91_PD25_DTR1		(1 << 25)	/* A: USART Data Terminal Ready 1 */
+#define AT91_PD25_TPK13		(1 << 25)	/* B: ETM Trace Packet Port 13 */
+#define AT91_PD26_TPK14		(1 << 26)	/* B: ETM Trace Packet Port 14 */
+#define AT91_PD27_TPK15		(1 << 27)	/* B: ETM Trace Packet Port 15 */
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91rm9200_emac.h b/include/asm-arm/arch-at91/at91rm9200_emac.h
new file mode 100644
index 0000000..0c417af
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91rm9200_emac.h
@@ -0,0 +1,138 @@
+/*
+ * include/asm-arm/arch-at91/at91rm9200_emac.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Ethernet MAC registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_EMAC_H
+#define AT91RM9200_EMAC_H
+
+#define	AT91_EMAC_CTL		0x00	/* Control Register */
+#define		AT91_EMAC_LB		(1 <<  0)	/* Loopback */
+#define		AT91_EMAC_LBL		(1 <<  1)	/* Loopback Local */
+#define		AT91_EMAC_RE		(1 <<  2)	/* Receive Enable */
+#define		AT91_EMAC_TE		(1 <<  3)	/* Transmit Enable */
+#define		AT91_EMAC_MPE		(1 <<  4)	/* Management Port Enable */
+#define		AT91_EMAC_CSR		(1 <<  5)	/* Clear Statistics Registers */
+#define		AT91_EMAC_INCSTAT	(1 <<  6)	/* Increment Statistics Registers */
+#define		AT91_EMAC_WES		(1 <<  7)	/* Write Enable for Statistics Registers */
+#define		AT91_EMAC_BP		(1 <<  8)	/* Back Pressure */
+
+#define	AT91_EMAC_CFG		0x04	/* Configuration Register */
+#define		AT91_EMAC_SPD		(1 <<  0)	/* Speed */
+#define		AT91_EMAC_FD		(1 <<  1)	/* Full Duplex */
+#define		AT91_EMAC_BR		(1 <<  2)	/* Bit Rate */
+#define		AT91_EMAC_CAF		(1 <<  4)	/* Copy All Frames */
+#define		AT91_EMAC_NBC		(1 <<  5)	/* No Broadcast */
+#define		AT91_EMAC_MTI		(1 <<  6)	/* Multicast Hash Enable */
+#define		AT91_EMAC_UNI		(1 <<  7)	/* Unicast Hash Enable */
+#define		AT91_EMAC_BIG		(1 <<  8)	/* Receive 1522 Bytes */
+#define		AT91_EMAC_EAE		(1 <<  9)	/* External Address Match Enable */
+#define		AT91_EMAC_CLK		(3 << 10)	/* MDC Clock Divisor */
+#define		AT91_EMAC_CLK_DIV8		(0 << 10)
+#define		AT91_EMAC_CLK_DIV16		(1 << 10)
+#define		AT91_EMAC_CLK_DIV32		(2 << 10)
+#define		AT91_EMAC_CLK_DIV64		(3 << 10)
+#define		AT91_EMAC_RTY		(1 << 12)	/* Retry Test */
+#define		AT91_EMAC_RMII		(1 << 13)	/* Reduce MII (RMII) */
+
+#define	AT91_EMAC_SR		0x08	/* Status Register */
+#define		AT91_EMAC_SR_LINK	(1 <<  0)	/* Link */
+#define		AT91_EMAC_SR_MDIO	(1 <<  1)	/* MDIO pin */
+#define		AT91_EMAC_SR_IDLE	(1 <<  2)	/* PHY idle */
+
+#define	AT91_EMAC_TAR		0x0c	/* Transmit Address Register */
+
+#define	AT91_EMAC_TCR		0x10	/* Transmit Control Register */
+#define		AT91_EMAC_LEN		(0x7ff << 0)	/* Transmit Frame Length */
+#define		AT91_EMAC_NCRC		(1     << 15)	/* No CRC */
+
+#define	AT91_EMAC_TSR		0x14	/* Transmit Status Register */
+#define		AT91_EMAC_TSR_OVR	(1 <<  0)	/* Transmit Buffer Overrun */
+#define		AT91_EMAC_TSR_COL	(1 <<  1)	/* Collision Occurred */
+#define		AT91_EMAC_TSR_RLE	(1 <<  2)	/* Retry Limit Exceeded */
+#define		AT91_EMAC_TSR_IDLE	(1 <<  3)	/* Transmitter Idle */
+#define		AT91_EMAC_TSR_BNQ	(1 <<  4)	/* Transmit Buffer not Queued */
+#define		AT91_EMAC_TSR_COMP	(1 <<  5)	/* Transmit Complete */
+#define		AT91_EMAC_TSR_UND	(1 <<  6)	/* Transmit Underrun */
+
+#define	AT91_EMAC_RBQP		0x18	/* Receive Buffer Queue Pointer */
+
+#define	AT91_EMAC_RSR		0x20	/* Receive Status Register */
+#define		AT91_EMAC_RSR_BNA	(1 <<  0)	/* Buffer Not Available */
+#define		AT91_EMAC_RSR_REC	(1 <<  1)	/* Frame Received */
+#define		AT91_EMAC_RSR_OVR	(1 <<  2)	/* RX Overrun */
+
+#define	AT91_EMAC_ISR		0x24	/* Interrupt Status Register */
+#define		AT91_EMAC_DONE		(1 <<  0)	/* Management Done */
+#define		AT91_EMAC_RCOM		(1 <<  1)	/* Receive Complete */
+#define		AT91_EMAC_RBNA		(1 <<  2)	/* Receive Buffer Not Available */
+#define		AT91_EMAC_TOVR		(1 <<  3)	/* Transmit Buffer Overrun */
+#define		AT91_EMAC_TUND		(1 <<  4)	/* Transmit Buffer Underrun */
+#define		AT91_EMAC_RTRY		(1 <<  5)	/* Retry Limit */
+#define		AT91_EMAC_TBRE		(1 <<  6)	/* Transmit Buffer Register Empty */
+#define		AT91_EMAC_TCOM		(1 <<  7)	/* Transmit Complete */
+#define		AT91_EMAC_TIDLE		(1 <<  8)	/* Transmit Idle */
+#define		AT91_EMAC_LINK		(1 <<  9)	/* Link */
+#define		AT91_EMAC_ROVR		(1 << 10)	/* RX Overrun */
+#define		AT91_EMAC_ABT		(1 << 11)	/* Abort */
+
+#define	AT91_EMAC_IER		0x28	/* Interrupt Enable Register */
+#define	AT91_EMAC_IDR		0x2c	/* Interrupt Disable Register */
+#define	AT91_EMAC_IMR		0x30	/* Interrupt Mask Register */
+
+#define	AT91_EMAC_MAN		0x34	/* PHY Maintenance Register */
+#define		AT91_EMAC_DATA		(0xffff << 0)	/* MDIO Data */
+#define		AT91_EMAC_REGA		(0x1f	<< 18)	/* MDIO Register */
+#define		AT91_EMAC_PHYA		(0x1f	<< 23)	/* MDIO PHY Address */
+#define		AT91_EMAC_RW		(3	<< 28)	/* Read/Write operation */
+#define			AT91_EMAC_RW_W		(1 << 28)
+#define			AT91_EMAC_RW_R		(2 << 28)
+#define		AT91_EMAC_MAN_802_3	0x40020000	/* IEEE 802.3 value */
+
+/*
+ * Statistics Registers.
+ */
+#define AT91_EMAC_FRA		0x40	/* Frames Transmitted OK */
+#define AT91_EMAC_SCOL		0x44	/* Single Collision Frame */
+#define AT91_EMAC_MCOL		0x48	/* Multiple Collision Frame */
+#define AT91_EMAC_OK		0x4c	/* Frames Received OK */
+#define AT91_EMAC_SEQE		0x50	/* Frame Check Sequence Error */
+#define AT91_EMAC_ALE		0x54	/* Alignmemt Error */
+#define AT91_EMAC_DTE		0x58	/* Deffered Transmission Frame */
+#define AT91_EMAC_LCOL		0x5c	/* Late Collision */
+#define AT91_EMAC_ECOL		0x60	/* Excessive Collision */
+#define AT91_EMAC_TUE		0x64	/* Transmit Underrun Error */
+#define AT91_EMAC_CSE		0x68	/* Carrier Sense Error */
+#define AT91_EMAC_DRFC		0x6c	/* Discard RX Frame */
+#define AT91_EMAC_ROV		0x70	/* Receive Overrun */
+#define AT91_EMAC_CDE		0x74	/* Code Error */
+#define AT91_EMAC_ELR		0x78	/* Excessive Length Error */
+#define AT91_EMAC_RJB		0x7c	/* Receive Jabber */
+#define AT91_EMAC_USF		0x80	/* Undersize Frame */
+#define AT91_EMAC_SQEE		0x84	/* SQE Test Error */
+
+/*
+ * Address Registers.
+ */
+#define AT91_EMAC_HSL		0x90	/* Hash Address Low [31:0] */
+#define AT91_EMAC_HSH		0x94	/* Hash Address High [63:32] */
+#define AT91_EMAC_SA1L		0x98	/* Specific Address 1 Low, bytes 0-3 */
+#define AT91_EMAC_SA1H		0x9c	/* Specific Address 1 High, bytes 4-5 */
+#define AT91_EMAC_SA2L		0xa0	/* Specific Address 2 Low, bytes 0-3 */
+#define AT91_EMAC_SA2H		0xa4	/* Specific Address 2 High, bytes 4-5 */
+#define AT91_EMAC_SA3L		0xa8	/* Specific Address 3 Low, bytes 0-3 */
+#define AT91_EMAC_SA3H		0xac	/* Specific Address 3 High, bytes 4-5 */
+#define AT91_EMAC_SA4L		0xb0	/* Specific Address 4 Low, bytes 0-3 */
+#define AT91_EMAC_SA4H		0xb4	/* Specific Address 4 High, bytes 4-5 */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91rm9200_mc.h b/include/asm-arm/arch-at91/at91rm9200_mc.h
new file mode 100644
index 0000000..24d0129
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91rm9200_mc.h
@@ -0,0 +1,160 @@
+/*
+ * include/asm-arm/arch-at91/at91rm9200_mc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_MC_H
+#define AT91RM9200_MC_H
+
+/* Memory Controller */
+#define AT91_MC_RCR		(AT91_MC + 0x00)	/* MC Remap Control Register */
+#define		AT91_MC_RCB		(1 <<  0)		/* Remap Command Bit */
+
+#define AT91_MC_ASR		(AT91_MC + 0x04)	/* MC Abort Status Register */
+#define		AT91_MC_UNADD		(1 <<  0)		/* Undefined Address Abort Status */
+#define		AT91_MC_MISADD		(1 <<  1)		/* Misaligned Address Abort Status */
+#define		AT91_MC_ABTSZ		(3 <<  8)		/* Abort Size Status */
+#define			AT91_MC_ABTSZ_BYTE		(0 << 8)
+#define			AT91_MC_ABTSZ_HALFWORD		(1 << 8)
+#define			AT91_MC_ABTSZ_WORD		(2 << 8)
+#define		AT91_MC_ABTTYP		(3 << 10)		/* Abort Type Status */
+#define			AT91_MC_ABTTYP_DATAREAD		(0 << 10)
+#define			AT91_MC_ABTTYP_DATAWRITE	(1 << 10)
+#define			AT91_MC_ABTTYP_FETCH		(2 << 10)
+#define		AT91_MC_MST0		(1 << 16)		/* ARM920T Abort Source */
+#define		AT91_MC_MST1		(1 << 17)		/* PDC Abort Source */
+#define		AT91_MC_MST2		(1 << 18)		/* UHP Abort Source */
+#define		AT91_MC_MST3		(1 << 19)		/* EMAC Abort Source */
+#define		AT91_MC_SVMST0		(1 << 24)		/* Saved ARM920T Abort Source */
+#define		AT91_MC_SVMST1		(1 << 25)		/* Saved PDC Abort Source */
+#define		AT91_MC_SVMST2		(1 << 26)		/* Saved UHP Abort Source */
+#define		AT91_MC_SVMST3		(1 << 27)		/* Saved EMAC Abort Source */
+
+#define AT91_MC_AASR		(AT91_MC + 0x08)	/* MC Abort Address Status Register */
+
+#define AT91_MC_MPR		(AT91_MC + 0x0c)	/* MC Master Priority Register */
+#define		AT91_MPR_MSTP0		(7 <<  0)		/* ARM920T Priority */
+#define		AT91_MPR_MSTP1		(7 <<  4)		/* PDC Priority */
+#define		AT91_MPR_MSTP2		(7 <<  8)		/* UHP Priority */
+#define		AT91_MPR_MSTP3		(7 << 12)		/* EMAC Priority */
+
+/* External Bus Interface (EBI) registers */
+#define AT91_EBI_CSA		(AT91_MC + 0x60)	/* Chip Select Assignment Register */
+#define		AT91_EBI_CS0A		(1 << 0)		/* Chip Select 0 Assignment */
+#define			AT91_EBI_CS0A_SMC		(0 << 0)
+#define			AT91_EBI_CS0A_BFC		(1 << 0)
+#define		AT91_EBI_CS1A		(1 << 1)		/* Chip Select 1 Assignment */
+#define			AT91_EBI_CS1A_SMC		(0 << 1)
+#define			AT91_EBI_CS1A_SDRAMC		(1 << 1)
+#define		AT91_EBI_CS3A		(1 << 3)		/* Chip Select 2 Assignment */
+#define			AT91_EBI_CS3A_SMC		(0 << 3)
+#define			AT91_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_EBI_CS4A		(1 << 4)		/* Chip Select 3 Assignment */
+#define			AT91_EBI_CS4A_SMC		(0 << 4)
+#define			AT91_EBI_CS4A_SMC_COMPACTFLASH	(1 << 4)
+#define AT91_EBI_CFGR		(AT91_MC + 0x64)	/* Configuration Register */
+#define		AT91_EBI_DBPUC		(1 << 0)		/* Data Bus Pull-Up Configuration */
+
+/* Static Memory Controller (SMC) registers */
+#define	AT91_SMC_CSR(n)		(AT91_MC + 0x70 + ((n) * 4))/* SMC Chip Select Register */
+#define		AT91_SMC_NWS		(0x7f <<  0)		/* Number of Wait States */
+#define			AT91_SMC_NWS_(x)	((x) << 0)
+#define		AT91_SMC_WSEN		(1    <<  7)		/* Wait State Enable */
+#define		AT91_SMC_TDF		(0xf  <<  8)		/* Data Float Time */
+#define			AT91_SMC_TDF_(x)	((x) << 8)
+#define		AT91_SMC_BAT		(1    << 12)		/* Byte Access Type */
+#define		AT91_SMC_DBW		(3    << 13)		/* Data Bus Width */
+#define			AT91_SMC_DBW_16		(1 << 13)
+#define			AT91_SMC_DBW_8		(2 << 13)
+#define		AT91_SMC_DPR		(1 << 15)		/* Data Read Protocol */
+#define		AT91_SMC_ACSS		(3 << 16)		/* Address to Chip Select Setup */
+#define			AT91_SMC_ACSS_STD	(0 << 16)
+#define			AT91_SMC_ACSS_1		(1 << 16)
+#define			AT91_SMC_ACSS_2		(2 << 16)
+#define			AT91_SMC_ACSS_3		(3 << 16)
+#define		AT91_SMC_RWSETUP	(7 << 24)		/* Read & Write Signal Time Setup */
+#define			AT91_SMC_RWSETUP_(x)	((x) << 24)
+#define		AT91_SMC_RWHOLD		(7 << 28)		/* Read & Write Signal Hold Time */
+#define			AT91_SMC_RWHOLD_(x)	((x) << 28)
+
+/* SDRAM Controller registers */
+#define AT91_SDRAMC_MR		(AT91_MC + 0x90)	/* Mode Register */
+#define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
+#define			AT91_SDRAMC_MODE_NORMAL		(0 << 0)
+#define			AT91_SDRAMC_MODE_NOP		(1 << 0)
+#define			AT91_SDRAMC_MODE_PRECHARGE	(2 << 0)
+#define			AT91_SDRAMC_MODE_LMR		(3 << 0)
+#define			AT91_SDRAMC_MODE_REFRESH	(4 << 0)
+#define		AT91_SDRAMC_DBW		(1   << 4)		/* Data Bus Width */
+#define			AT91_SDRAMC_DBW_32	(0 << 4)
+#define			AT91_SDRAMC_DBW_16	(1 << 4)
+
+#define AT91_SDRAMC_TR		(AT91_MC + 0x94)	/* Refresh Timer Register */
+#define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Count */
+
+#define AT91_SDRAMC_CR		(AT91_MC + 0x98)	/* Configuration Register */
+#define		AT91_SDRAMC_NC		(3   <<  0)		/* Number of Column Bits */
+#define			AT91_SDRAMC_NC_8	(0 << 0)
+#define			AT91_SDRAMC_NC_9	(1 << 0)
+#define			AT91_SDRAMC_NC_10	(2 << 0)
+#define			AT91_SDRAMC_NC_11	(3 << 0)
+#define		AT91_SDRAMC_NR		(3   <<  2)		/* Number of Row Bits */
+#define			AT91_SDRAMC_NR_11	(0 << 2)
+#define			AT91_SDRAMC_NR_12	(1 << 2)
+#define			AT91_SDRAMC_NR_13	(2 << 2)
+#define		AT91_SDRAMC_NB		(1   <<  4)		/* Number of Banks */
+#define			AT91_SDRAMC_NB_2	(0 << 4)
+#define			AT91_SDRAMC_NB_4	(1 << 4)
+#define		AT91_SDRAMC_CAS		(3   <<  5)		/* CAS Latency */
+#define			AT91_SDRAMC_CAS_2	(2 << 5)
+#define		AT91_SDRAMC_TWR		(0xf <<  7)		/* Write Recovery Delay */
+#define		AT91_SDRAMC_TRC		(0xf << 11)		/* Row Cycle Delay */
+#define		AT91_SDRAMC_TRP		(0xf << 15)		/* Row Precharge Delay */
+#define		AT91_SDRAMC_TRCD	(0xf << 19)		/* Row to Column Delay */
+#define		AT91_SDRAMC_TRAS	(0xf << 23)		/* Active to Precharge Delay */
+#define		AT91_SDRAMC_TXSR	(0xf << 27)		/* Exit Self Refresh to Active Delay */
+
+#define AT91_SDRAMC_SRR		(AT91_MC + 0x9c)	/* Self Refresh Register */
+#define AT91_SDRAMC_LPR		(AT91_MC + 0xa0)	/* Low Power Register */
+#define AT91_SDRAMC_IER		(AT91_MC + 0xa4)	/* Interrupt Enable Register */
+#define AT91_SDRAMC_IDR		(AT91_MC + 0xa8)	/* Interrupt Disable Register */
+#define AT91_SDRAMC_IMR		(AT91_MC + 0xac)	/* Interrupt Mask Register */
+#define AT91_SDRAMC_ISR		(AT91_MC + 0xb0)	/* Interrupt Status Register */
+
+/* Burst Flash Controller register */
+#define AT91_BFC_MR		(AT91_MC + 0xc0)	/* Mode Register */
+#define		AT91_BFC_BFCOM		(3   <<  0)		/* Burst Flash Controller Operating Mode */
+#define			AT91_BFC_BFCOM_DISABLED	(0 << 0)
+#define			AT91_BFC_BFCOM_ASYNC	(1 << 0)
+#define			AT91_BFC_BFCOM_BURST	(2 << 0)
+#define		AT91_BFC_BFCC		(3   <<  2)		/* Burst Flash Controller Clock */
+#define			AT91_BFC_BFCC_MCK	(1 << 2)
+#define			AT91_BFC_BFCC_DIV2	(2 << 2)
+#define			AT91_BFC_BFCC_DIV4	(3 << 2)
+#define		AT91_BFC_AVL		(0xf <<  4)		/* Address Valid Latency */
+#define		AT91_BFC_PAGES		(7   <<  8)		/* Page Size */
+#define			AT91_BFC_PAGES_NO_PAGE	(0 << 8)
+#define			AT91_BFC_PAGES_16	(1 << 8)
+#define			AT91_BFC_PAGES_32	(2 << 8)
+#define			AT91_BFC_PAGES_64	(3 << 8)
+#define			AT91_BFC_PAGES_128	(4 << 8)
+#define			AT91_BFC_PAGES_256	(5 << 8)
+#define			AT91_BFC_PAGES_512	(6 << 8)
+#define			AT91_BFC_PAGES_1024	(7 << 8)
+#define		AT91_BFC_OEL		(3   << 12)		/* Output Enable Latency */
+#define		AT91_BFC_BAAEN		(1   << 16)		/* Burst Address Advance Enable */
+#define		AT91_BFC_BFOEH		(1   << 17)		/* Burst Flash Output Enable Handling */
+#define		AT91_BFC_MUXEN		(1   << 18)		/* Multiplexed Bus Enable */
+#define		AT91_BFC_RDYEN		(1   << 19)		/* Ready Enable Mode */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91sam9260.h b/include/asm-arm/arch-at91/at91sam9260.h
new file mode 100644
index 0000000..73d93ae
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91sam9260.h
@@ -0,0 +1,125 @@
+/*
+ * include/asm-arm/arch-at91/at91sam9260.h
+ *
+ * (C) 2006 Andrew Victor
+ *
+ * Common definitions.
+ * Based on AT91SAM9260 datasheet revision A (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9260_H
+#define AT91SAM9260_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripherals */
+#define AT91SAM9260_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91SAM9260_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91SAM9260_ID_PIOC	4	/* Parallel IO Controller C */
+#define AT91SAM9260_ID_ADC	5	/* Analog-to-Digital Converter */
+#define AT91SAM9260_ID_US0	6	/* USART 0 */
+#define AT91SAM9260_ID_US1	7	/* USART 1 */
+#define AT91SAM9260_ID_US2	8	/* USART 2 */
+#define AT91SAM9260_ID_MCI	9	/* Multimedia Card Interface */
+#define AT91SAM9260_ID_UDP	10	/* USB Device Port */
+#define AT91SAM9260_ID_TWI	11	/* Two-Wire Interface */
+#define AT91SAM9260_ID_SPI0	12	/* Serial Peripheral Interface 0 */
+#define AT91SAM9260_ID_SPI1	13	/* Serial Peripheral Interface 1 */
+#define AT91SAM9260_ID_SSC	14	/* Serial Synchronous Controller */
+#define AT91SAM9260_ID_TC0	17	/* Timer Counter 0 */
+#define AT91SAM9260_ID_TC1	18	/* Timer Counter 1 */
+#define AT91SAM9260_ID_TC2	19	/* Timer Counter 2 */
+#define AT91SAM9260_ID_UHP	20	/* USB Host port */
+#define AT91SAM9260_ID_EMAC	21	/* Ethernet */
+#define AT91SAM9260_ID_ISI	22	/* Image Sensor Interface */
+#define AT91SAM9260_ID_US3	23	/* USART 3 */
+#define AT91SAM9260_ID_US4	24	/* USART 4 */
+#define AT91SAM9260_ID_US5	25	/* USART 5 */
+#define AT91SAM9260_ID_TC3	26	/* Timer Counter 3 */
+#define AT91SAM9260_ID_TC4	27	/* Timer Counter 4 */
+#define AT91SAM9260_ID_TC5	28	/* Timer Counter 5 */
+#define AT91SAM9260_ID_IRQ0	29	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9260_ID_IRQ1	30	/* Advanced Interrupt Controller (IRQ1) */
+#define AT91SAM9260_ID_IRQ2	31	/* Advanced Interrupt Controller (IRQ2) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9260_BASE_TCB0		0xfffa0000
+#define AT91SAM9260_BASE_TC0		0xfffa0000
+#define AT91SAM9260_BASE_TC1		0xfffa0040
+#define AT91SAM9260_BASE_TC2		0xfffa0080
+#define AT91SAM9260_BASE_UDP		0xfffa4000
+#define AT91SAM9260_BASE_MCI		0xfffa8000
+#define AT91SAM9260_BASE_TWI		0xfffac000
+#define AT91SAM9260_BASE_US0		0xfffb0000
+#define AT91SAM9260_BASE_US1		0xfffb4000
+#define AT91SAM9260_BASE_US2		0xfffb8000
+#define AT91SAM9260_BASE_SSC		0xfffbc000
+#define AT91SAM9260_BASE_ISI		0xfffc0000
+#define AT91SAM9260_BASE_EMAC		0xfffc4000
+#define AT91SAM9260_BASE_SPI0		0xfffc8000
+#define AT91SAM9260_BASE_SPI1		0xfffcc000
+#define AT91SAM9260_BASE_US3		0xfffd0000
+#define AT91SAM9260_BASE_US4		0xfffd4000
+#define AT91SAM9260_BASE_US5		0xfffd8000
+#define AT91SAM9260_BASE_TCB1		0xfffdc000
+#define AT91SAM9260_BASE_TC3		0xfffdc000
+#define AT91SAM9260_BASE_TC4		0xfffdc040
+#define AT91SAM9260_BASE_TC5		0xfffdc080
+#define AT91SAM9260_BASE_ADC		0xfffe0000
+#define AT91_BASE_SYS			0xffffe800
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_CCFG	(0xffffef10 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9260_ROM_BASE	0x00100000	/* Internal ROM base address */
+#define AT91SAM9260_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
+
+#define AT91SAM9260_SRAM0_BASE	0x00200000	/* Internal SRAM 0 base address */
+#define AT91SAM9260_SRAM0_SIZE	SZ_4K		/* Internal SRAM 0 size (4Kb) */
+#define AT91SAM9260_SRAM1_BASE	0x00300000	/* Internal SRAM 1 base address */
+#define AT91SAM9260_SRAM1_SIZE	SZ_4K		/* Internal SRAM 1 size (4Kb) */
+
+#define AT91SAM9260_UHP_BASE	0x00500000	/* USB Host controller */
+
+#if 0
+/*
+ * PIO pin definitions (peripheral A/B multiplexing).
+ */
+
+// TODO: Add
+
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91sam9260_matrix.h b/include/asm-arm/arch-at91/at91sam9260_matrix.h
new file mode 100644
index 0000000..573e97a
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91sam9260_matrix.h
@@ -0,0 +1,78 @@
+/*
+ * include/asm-arm/arch-at91/at91sam9260_matrix.h
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9260 datasheet revision B.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9260_MATRIX_H
+#define AT91SAM9260_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x04)	/* Master Configuration Register 5 */
+#define		AT91_MATRIX_ULBT		(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff <<  0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
+#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
+#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
+#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x11C)	/* EBI Chip Select Assignment Register */
+#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
+#define		AT91_MATRIX_CS5A		(1 << 5 )	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
+#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_VDDIOMSEL		(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_VDDIOMSEL_1_8V	(0 << 16)
+#define			AT91_MATRIX_VDDIOMSEL_3_3V	(1 << 16)
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91sam9261.h b/include/asm-arm/arch-at91/at91sam9261.h
new file mode 100644
index 0000000..01b58ff
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91sam9261.h
@@ -0,0 +1,292 @@
+/*
+ * include/asm-arm/arch-at91/at91sam9261.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Common definitions.
+ * Based on AT91SAM9261 datasheet revision E. (Preliminary)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9261_H
+#define AT91SAM9261_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripherals */
+#define AT91SAM9261_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91SAM9261_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91SAM9261_ID_PIOC	4	/* Parallel IO Controller C */
+#define AT91SAM9261_ID_US0	6	/* USART 0 */
+#define AT91SAM9261_ID_US1	7	/* USART 1 */
+#define AT91SAM9261_ID_US2	8	/* USART 2 */
+#define AT91SAM9261_ID_MCI	9	/* Multimedia Card Interface */
+#define AT91SAM9261_ID_UDP	10	/* USB Device Port */
+#define AT91SAM9261_ID_TWI	11	/* Two-Wire Interface */
+#define AT91SAM9261_ID_SPI0	12	/* Serial Peripheral Interface 0 */
+#define AT91SAM9261_ID_SPI1	13	/* Serial Peripheral Interface 1 */
+#define AT91SAM9261_ID_SSC0	14	/* Serial Synchronous Controller 0 */
+#define AT91SAM9261_ID_SSC1	15	/* Serial Synchronous Controller 1 */
+#define AT91SAM9261_ID_SSC2	16	/* Serial Synchronous Controller 2 */
+#define AT91SAM9261_ID_TC0	17	/* Timer Counter 0 */
+#define AT91SAM9261_ID_TC1	18	/* Timer Counter 1 */
+#define AT91SAM9261_ID_TC2	19	/* Timer Counter 2 */
+#define AT91SAM9261_ID_UHP	20	/* USB Host port */
+#define AT91SAM9261_ID_LCDC	21	/* LDC Controller */
+#define AT91SAM9261_ID_IRQ0	29	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9261_ID_IRQ1	30	/* Advanced Interrupt Controller (IRQ1) */
+#define AT91SAM9261_ID_IRQ2	31	/* Advanced Interrupt Controller (IRQ2) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9261_BASE_TCB0		0xfffa0000
+#define AT91SAM9261_BASE_TC0		0xfffa0000
+#define AT91SAM9261_BASE_TC1		0xfffa0040
+#define AT91SAM9261_BASE_TC2		0xfffa0080
+#define AT91SAM9261_BASE_UDP		0xfffa4000
+#define AT91SAM9261_BASE_MCI		0xfffa8000
+#define AT91SAM9261_BASE_TWI		0xfffac000
+#define AT91SAM9261_BASE_US0		0xfffb0000
+#define AT91SAM9261_BASE_US1		0xfffb4000
+#define AT91SAM9261_BASE_US2		0xfffb8000
+#define AT91SAM9261_BASE_SSC0		0xfffbc000
+#define AT91SAM9261_BASE_SSC1		0xfffc0000
+#define AT91SAM9261_BASE_SSC2		0xfffc4000
+#define AT91SAM9261_BASE_SPI0		0xfffc8000
+#define AT91SAM9261_BASE_SPI1		0xfffcc000
+#define AT91_BASE_SYS			0xffffea00
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9261_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+#define AT91SAM9261_SRAM_SIZE	0x00028000	/* Internal SRAM size (160Kb) */
+
+#define AT91SAM9261_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91SAM9261_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
+
+#define AT91SAM9261_UHP_BASE	0x00500000	/* USB Host controller */
+#define AT91SAM9261_LCDC_BASE	0x00600000	/* LDC controller */
+
+
+#if 0
+/*
+ * PIO pin definitions (peripheral A/B multiplexing).
+ */
+#define AT91_PA0_SPI0_MISO	(1 <<  0)	/* A: SPI0 Master In Slave */
+#define AT91_PA0_MCDA0		(1 <<  0)	/* B: Multimedia Card A Data 0 */
+#define AT91_PA1_SPI0_MOSI	(1 <<  1)	/* A: SPI0 Master Out Slave */
+#define AT91_PA1_MCCDA		(1 <<  1)	/* B: Multimedia Card A Command */
+#define AT91_PA2_SPI0_SPCK	(1 <<  2)	/* A: SPI0 Serial Clock */
+#define AT91_PA2_MCCK		(1 <<  2)	/* B: Multimedia Card Clock */
+#define AT91_PA3_SPI0_NPCS0	(1 <<  3)	/* A: SPI0 Peripheral Chip Select 0 */
+#define AT91_PA4_SPI0_NPCS1	(1 <<  4)	/* A: SPI0 Peripheral Chip Select 1 */
+#define AT91_PA4_MCDA1		(1 <<  4)	/* B: Multimedia Card A Data 1 */
+#define AT91_PA5_SPI0_NPCS2	(1 <<  5)	/* A: SPI0 Peripheral Chip Select 2 */
+#define AT91_PA5_MCDA2		(1 <<  5)	/* B: Multimedia Card A Data 2 */
+#define AT91_PA6_SPI0_NPCS3	(1 <<  6)	/* A: SPI0 Peripheral Chip Select 3 */
+#define AT91_PA6_MCDA3		(1 <<  6)	/* B: Multimedia Card A Data 3 */
+#define AT91_PA7_TWD		(1 <<  7)	/* A: TWI Two-wire Serial Data */
+#define AT91_PA7_PCK0		(1 <<  7)	/* B: PMC Programmable clock Output 0 */
+#define AT91_PA8_TWCK		(1 <<  8)	/* A: TWI Two-wire Serial Clock */
+#define AT91_PA8_PCK1		(1 <<  8)	/* B: PMC Programmable clock Output 1 */
+#define AT91_PA9_DRXD		(1 <<  9)	/* A: DBGU Debug Receive Data */
+#define AT91_PA9_PCK2		(1 <<  9)	/* B: PMC Programmable clock Output 2 */
+#define AT91_PA10_DTXD		(1 << 10)	/* A: DBGU Debug Transmit Data */
+#define AT91_PA10_PCK3		(1 << 10)	/* B: PMC Programmable clock Output 3 */
+#define AT91_PA11_TSYNC		(1 << 11)	/* A: Trace Synchronization Signal */
+#define AT91_PA11_SCK1		(1 << 11)	/* B: USART1 Serial Clock */
+#define AT91_PA12_TCLK		(1 << 12)	/* A: Trace Clock */
+#define AT91_PA12_RTS1		(1 << 12)	/* B: USART1 Ready To Send */
+#define AT91_PA13_TPS0		(1 << 13)	/* A: Trace ARM Pipeline Status 0 */
+#define AT91_PA13_CTS1		(1 << 13)	/* B: USART1 Clear To Send */
+#define AT91_PA14_TPS1		(1 << 14)	/* A: Trace ARM Pipeline Status 1 */
+#define AT91_PA14_SCK2		(1 << 14)	/* B: USART2 Serial Clock */
+#define AT91_PA15_TPS2		(1 << 15)	/* A: Trace ARM Pipeline Status 2 */
+#define AT91_PA15_RTS2		(1 << 15)	/* B: USART2 Ready To Send */
+#define AT91_PA16_TPK0		(1 << 16)	/* A: Trace Packet Port 0 */
+#define AT91_PA16_CTS2		(1 << 16)	/* B: USART2 Clear To Send */
+#define AT91_PA17_TPK1		(1 << 17)	/* A: Trace Packet Port 1 */
+#define AT91_PA17_TF1		(1 << 17)	/* B: SSC1 Transmit Frame Sync */
+#define AT91_PA18_TPK2		(1 << 18)	/* A: Trace Packet Port 2 */
+#define AT91_PA18_TK1		(1 << 18)	/* B: SSC1 Transmit Clock */
+#define AT91_PA19_TPK3		(1 << 19)	/* A: Trace Packet Port 3 */
+#define AT91_PA19_TD1		(1 << 19)	/* B: SSC1 Transmit Data */
+#define AT91_PA20_TPK4		(1 << 20)	/* A: Trace Packet Port 4 */
+#define AT91_PA20_RD1		(1 << 20)	/* B: SSC1 Receive Data */
+#define AT91_PA21_TPK5		(1 << 21)	/* A: Trace Packet Port 5 */
+#define AT91_PA21_RK1		(1 << 21)	/* B: SSC1 Receive Clock */
+#define AT91_PA22_TPK6		(1 << 22)	/* A: Trace Packet Port 6 */
+#define AT91_PA22_RF1		(1 << 22)	/* B: SSC1 Receive Frame Sync */
+#define AT91_PA23_TPK7		(1 << 23)	/* A: Trace Packet Port 7 */
+#define AT91_PA23_RTS0		(1 << 23)	/* B: USART0 Ready To Send */
+#define AT91_PA24_TPK8		(1 << 24)	/* A: Trace Packet Port 8 */
+#define AT91_PA24_SPI1_NPCS1	(1 << 24)	/* B: SPI1 Peripheral Chip Select 1 */
+#define AT91_PA25_TPK9		(1 << 25)	/* A: Trace Packet Port 9 */
+#define AT91_PA25_SPI1_NPCS2	(1 << 25)	/* B: SPI1 Peripheral Chip Select 2 */
+#define AT91_PA26_TPK10		(1 << 26)	/* A: Trace Packet Port 10 */
+#define AT91_PA26_SPI1_NPCS3	(1 << 26)	/* B: SPI1 Peripheral Chip Select 3 */
+#define AT91_PA27_TPK11		(1 << 27)	/* A: Trace Packet Port 11 */
+#define AT91_PA27_SPI0_NPCS1	(1 << 27)	/* B: SPI0 Peripheral Chip Select 1 */
+#define AT91_PA28_TPK12		(1 << 28)	/* A: Trace Packet Port 12 */
+#define AT91_PA28_SPI0_NPCS2	(1 << 28)	/* B: SPI0 Peripheral Chip Select 2 */
+#define AT91_PA29_TPK13		(1 << 29)	/* A: Trace Packet Port 13 */
+#define AT91_PA29_SPI0_NPCS3	(1 << 29)	/* B: SPI0 Peripheral Chip Select 3 */
+#define AT91_PA30_TPK14		(1 << 30)	/* A: Trace Packet Port 14 */
+#define AT91_PA30_A23		(1 << 30)	/* B: Address Bus bit 23 */
+#define AT91_PA31_TPK15		(1 << 31)	/* A: Trace Packet Port 15 */
+#define AT91_PA31_A24		(1 << 31)	/* B: Address Bus bit 24 */
+
+#define AT91_PB0_LCDVSYNC	(1 <<  0)	/* A: LCD Vertical Synchronization */
+#define AT91_PB1_LCDHSYNC	(1 <<  1)	/* A: LCD Horizontal Synchronization */
+#define AT91_PB2_LCDDOTCK	(1 <<  2)	/* A: LCD Dot Clock */
+#define AT91_PB2_PCK0		(1 <<  2)	/* B: PMC Programmable clock Output 0 */
+#define AT91_PB3_LCDDEN		(1 <<  3)	/* A: LCD Data Enable */
+#define AT91_PB4_LCDCC		(1 <<  4)	/* A: LCD Contrast Control */
+#define AT91_PB4_LCDD2		(1 <<  4)	/* B: LCD Data Bus Bit 2 */
+#define AT91_PB5_LCDD0		(1 <<  5)	/* A: LCD Data Bus Bit 0 */
+#define AT91_PB5_LCDD3		(1 <<  5)	/* B: LCD Data Bus Bit 3 */
+#define AT91_PB6_LCDD1		(1 <<  6)	/* A: LCD Data Bus Bit 1 */
+#define AT91_PB6_LCDD4		(1 <<  6)	/* B: LCD Data Bus Bit 4 */
+#define AT91_PB7_LCDD2		(1 <<  7)	/* A: LCD Data Bus Bit 2 */
+#define AT91_PB7_LCDD5		(1 <<  7)	/* B: LCD Data Bus Bit 5 */
+#define AT91_PB8_LCDD3		(1 <<  8)	/* A: LCD Data Bus Bit 3 */
+#define AT91_PB8_LCDD6		(1 <<  8)	/* B: LCD Data Bus Bit 6 */
+#define AT91_PB9_LCDD4		(1 <<  9)	/* A: LCD Data Bus Bit 4 */
+#define AT91_PB9_LCDD7		(1 <<  9)	/* B: LCD Data Bus Bit 7 */
+#define AT91_PB10_LCDD5		(1 << 10)	/* A: LCD Data Bus Bit 5 */
+#define AT91_PB10_LCDD10	(1 << 10)	/* B: LCD Data Bus Bit 10 */
+#define AT91_PB11_LCDD6		(1 << 11)	/* A: LCD Data Bus Bit 6 */
+#define AT91_PB11_LCDD11	(1 << 11)	/* B: LCD Data Bus Bit 11 */
+#define AT91_PB12_LCDD7		(1 << 12)	/* A: LCD Data Bus Bit 7 */
+#define AT91_PB12_LCDD12	(1 << 12)	/* B: LCD Data Bus Bit 12 */
+#define AT91_PB13_LCDD8		(1 << 13)	/* A: LCD Data Bus Bit 8 */
+#define AT91_PB13_LCDD13	(1 << 13)	/* B: LCD Data Bus Bit 13 */
+#define AT91_PB14_LCDD9		(1 << 14)	/* A: LCD Data Bus Bit 9 */
+#define AT91_PB14_LCDD14	(1 << 14)	/* B: LCD Data Bus Bit 14 */
+#define AT91_PB15_LCDD10	(1 << 15)	/* A: LCD Data Bus Bit 10 */
+#define AT91_PB15_LCDD15	(1 << 15)	/* B: LCD Data Bus Bit 15 */
+#define AT91_PB16_LCDD11	(1 << 16)	/* A: LCD Data Bus Bit 11 */
+#define AT91_PB16_LCDD19	(1 << 16)	/* B: LCD Data Bus Bit 19 */
+#define AT91_PB17_LCDD12	(1 << 17)	/* A: LCD Data Bus Bit 12 */
+#define AT91_PB17_LCDD20	(1 << 17)	/* B: LCD Data Bus Bit 20 */
+#define AT91_PB18_LCDD13	(1 << 18)	/* A: LCD Data Bus Bit 13 */
+#define AT91_PB18_LCDD21	(1 << 18)	/* B: LCD Data Bus Bit 21 */
+#define AT91_PB19_LCDD14	(1 << 19)	/* A: LCD Data Bus Bit 14 */
+#define AT91_PB19_LCDD22	(1 << 19)	/* B: LCD Data Bus Bit 22 */
+#define AT91_PB20_LCDD15	(1 << 20)	/* A: LCD Data Bus Bit 15 */
+#define AT91_PB20_LCDD23	(1 << 20)	/* B: LCD Data Bus Bit 23 */
+#define AT91_PB21_TF0		(1 << 21)	/* A: SSC0 Transmit Frame Sync */
+#define AT91_PB21_LCDD16	(1 << 21)	/* B: LCD Data Bus Bit 16 */
+#define AT91_PB22_TK0		(1 << 22)	/* A: SSC0 Transmit Clock */
+#define AT91_PB22_LCDD17	(1 << 22)	/* B: LCD Data Bus Bit 17 */
+#define AT91_PB23_TD0		(1 << 23)	/* A: SSC0 Transmit Data */
+#define AT91_PB23_LCDD18	(1 << 23)	/* B: LCD Data Bus Bit 18 */
+#define AT91_PB24_RD0		(1 << 24)	/* A: SSC0 Receive Data */
+#define AT91_PB24_LCDD19	(1 << 24)	/* B: LCD Data Bus Bit 19 */
+#define AT91_PB25_RK0		(1 << 25)	/* A: SSC0 Receive Clock */
+#define AT91_PB25_LCDD20	(1 << 25)	/* B: LCD Data Bus Bit 20 */
+#define AT91_PB26_RF0		(1 << 26)	/* A: SSC0 Receive Frame Sync */
+#define AT91_PB26_LCDD21	(1 << 26)	/* B: LCD Data Bus Bit 21 */
+#define AT91_PB27_SPI1_NPCS1	(1 << 27)	/* A: SPI1 Peripheral Chip Select 1 */
+#define AT91_PB27_LCDD22	(1 << 27)	/* B: LCD Data Bus Bit 22 */
+#define AT91_PB28_SPI1_NPCS0	(1 << 28)	/* A: SPI1 Peripheral Chip Select 0 */
+#define AT91_PB28_LCDD23	(1 << 28)	/* B: LCD Data Bus Bit 23 */
+#define AT91_PB29_SPI1_SPCK	(1 << 29)	/* A: SPI1 Serial Clock */
+#define AT91_PB29_IRQ2		(1 << 29)	/* B: Interrupt input 2 */
+#define AT91_PB30_SPI1_MISO	(1 << 30)	/* A: SPI1 Master In Slave */
+#define AT91_PB30_IRQ1		(1 << 30)	/* B: Interrupt input 1 */
+#define AT91_PB31_SPI1_MOSI	(1 << 31)	/* A: SPI1 Master Out Slave */
+#define AT91_PB31_PCK2		(1 << 31)	/* B: PMC Programmable clock Output 2 */
+
+#define AT91_PC0_SMOE		(1 << 0)	/* A: SmartMedia Output Enable */
+#define AT91_PC0_NCS6		(1 << 0)	/* B: Chip Select 6 */
+#define AT91_PC1_SMWE		(1 << 1)	/* A: SmartMedia Write Enable */
+#define AT91_PC1_NCS7		(1 << 1)	/* B: Chip Select 7 */
+#define AT91_PC2_NWAIT		(1 << 2)	/* A: NWAIT */
+#define AT91_PC2_IRQ0		(1 << 2)	/* B: Interrupt input 0 */
+#define AT91_PC3_A25_CFRNW	(1 << 3)	/* A: Address Bus[25] / Compact Flash Read Not Write */
+#define AT91_PC4_NCS4_CFCS0	(1 << 4)	/* A: Chip Select 4 / CompactFlash Chip Select 0 */
+#define AT91_PC5_NCS5_CFCS1	(1 << 5)	/* A: Chip Select 5 / CompactFlash Chip Select 1 */
+#define AT91_PC6_CFCE1		(1 << 6)	/* A: CompactFlash Chip Enable 1 */
+#define AT91_PC7_CFCE2		(1 << 7)	/* A: CompactFlash Chip Enable 2 */
+#define AT91_PC8_TXD0		(1 << 8)	/* A: USART0 Transmit Data */
+#define AT91_PC8_PCK2		(1 << 8)	/* B: PMC Programmable clock Output 2 */
+#define AT91_PC9_RXD0		(1 << 9)	/* A: USART0 Receive Data */
+#define AT91_PC9_PCK3		(1 << 9)	/* B: PMC Programmable clock Output 3 */
+#define AT91_PC10_RTS0		(1 << 10)	/* A: USART0 Ready To Send */
+#define AT91_PC10_SCK0		(1 << 10)	/* B: USART0 Serial Clock */
+#define AT91_PC11_CTS0		(1 << 11)	/* A: USART0 Clear To Send */
+#define AT91_PC11_FIQ		(1 << 11)	/* B: AIC Fast Interrupt Input */
+#define AT91_PC12_TXD1		(1 << 12)	/* A: USART1 Transmit Data */
+#define AT91_PC12_NCS6		(1 << 12)	/* B: Chip Select 6 */
+#define AT91_PC13_RXD1		(1 << 13)	/* A: USART1 Receive Data */
+#define AT91_PC13_NCS7		(1 << 13)	/* B: Chip Select 7 */
+#define AT91_PC14_TXD2		(1 << 14)	/* A: USART2 Transmit Data */
+#define AT91_PC14_SPI1_NPCS2	(1 << 14)	/* B: SPI1 Peripheral Chip Select 2 */
+#define AT91_PC15_RXD2		(1 << 15)	/* A: USART2 Receive Data */
+#define AT91_PC15_SPI1_NPCS3	(1 << 15)	/* B: SPI1 Peripheral Chip Select 3 */
+#define AT91_PC16_D16		(1 << 16)	/* A: Data Bus [16] */
+#define AT91_PC16_TCLK0		(1 << 16)	/* B: Timer Counter 0 external clock input */
+#define AT91_PC17_D17		(1 << 17)	/* A: Data Bus [17] */
+#define AT91_PC17_TCLK1		(1 << 17)	/* B: Timer Counter 1 external clock input */
+#define AT91_PC18_D18		(1 << 18)	/* A: Data Bus [18] */
+#define AT91_PC18_TCLK2		(1 << 18)	/* B: Timer Counter 2 external clock input */
+#define AT91_PC19_D19		(1 << 19)	/* A: Data Bus [19] */
+#define AT91_PC19_TIOA0		(1 << 19)	/* B: Timer Counter 0 Multipurpose Timer I/O Pin A */
+#define AT91_PC20_D20		(1 << 20)	/* A: Data Bus [20] */
+#define AT91_PC20_TIOB0		(1 << 20)	/* B: Timer Counter 0 Multipurpose Timer I/O Pin B */
+#define AT91_PC21_D21		(1 << 21)	/* A: Data Bus [21] */
+#define AT91_PC21_TIOA1		(1 << 21)	/* B: Timer Counter 1 Multipurpose Timer I/O Pin A */
+#define AT91_PC22_D22		(1 << 22)	/* A: Data Bus [22] */
+#define AT91_PC22_TIOB1		(1 << 22)	/* B: Timer Counter 1 Multipurpose Timer I/O Pin B */
+#define AT91_PC23_D23		(1 << 23)	/* A: Data Bus [23] */
+#define AT91_PC23_TIOA2		(1 << 23)	/* B: Timer Counter 2 Multipurpose Timer I/O Pin A */
+#define AT91_PC24_D24		(1 << 24)	/* A: Data Bus [24] */
+#define AT91_PC24_TIOB2		(1 << 24)	/* B: Timer Counter 2 Multipurpose Timer I/O Pin B */
+#define AT91_PC25_D25		(1 << 25)	/* A: Data Bus [25] */
+#define AT91_PC25_TF2		(1 << 25)	/* B: SSC2 Transmit Frame Sync */
+#define AT91_PC26_D26		(1 << 26)	/* A: Data Bus [26] */
+#define AT91_PC26_TK2		(1 << 26)	/* B: SSC2 Transmit Clock */
+#define AT91_PC27_D27		(1 << 27)	/* A: Data Bus [27] */
+#define AT91_PC27_TD2		(1 << 27)	/* B: SSC2 Transmit Data */
+#define AT91_PC28_D28		(1 << 28)	/* A: Data Bus [28] */
+#define AT91_PC28_RD2		(1 << 28)	/* B: SSC2 Receive Data */
+#define AT91_PC29_D29		(1 << 29)	/* A: Data Bus [29] */
+#define AT91_PC29_RK2		(1 << 29)	/* B: SSC2 Receive Clock */
+#define AT91_PC30_D30		(1 << 30)	/* A: Data Bus [30] */
+#define AT91_PC30_RF2		(1 << 30)	/* B: SSC2 Receive Frame Sync */
+#define AT91_PC31_D31		(1 << 31)	/* A: Data Bus [31] */
+#define AT91_PC31_PCK1		(1 << 31)	/* B: PMC Programmable clock Output 1 */
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91sam9261_matrix.h b/include/asm-arm/arch-at91/at91sam9261_matrix.h
new file mode 100644
index 0000000..6f07242
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91sam9261_matrix.h
@@ -0,0 +1,62 @@
+/*
+ * include/asm-arm/arch-at91/at91sam9261_matrix.h
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9261_MATRIX_H
+#define AT91SAM9261_MATRIX_H
+
+#define AT91_MATRIX_MCFG	(AT91_MATRIX + 0x00)	/* Master Configuration Register */
+#define		AT91_MATRIX_RCB0	(1 << 0)		/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1	(1 << 1)		/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x04)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x08)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x0C)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x10)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x14)	/* Slave Configuration Register 4 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
+
+#define AT91_MATRIX_TCR		(AT91_MATRIX + 0x24)	/* TCM Configuration Register */
+#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
+#define			AT91_MATRIX_ITCM_0		(0 << 0)
+#define			AT91_MATRIX_ITCM_16		(5 << 0)
+#define			AT91_MATRIX_ITCM_32		(6 << 0)
+#define			AT91_MATRIX_ITCM_64		(7 << 0)
+#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
+#define			AT91_MATRIX_DTCM_0		(0 << 4)
+#define			AT91_MATRIX_DTCM_16		(5 << 4)
+#define			AT91_MATRIX_DTCM_32		(6 << 4)
+#define			AT91_MATRIX_DTCM_64		(7 << 4)
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x30)	/* EBI Chip Select Assignment Register */
+#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
+#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
+#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+
+#define AT91_MATRIX_USBPUCR	(AT91_MATRIX + 0x34)	/* USB Pad Pull-Up Control Register */
+#define		AT91_MATRIX_USBPUCR_PUON	(1 << 30)	/* USB Device PAD Pull-up Enable */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91sam926x_mc.h b/include/asm-arm/arch-at91/at91sam926x_mc.h
new file mode 100644
index 0000000..355eee6
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91sam926x_mc.h
@@ -0,0 +1,134 @@
+/*
+ * include/asm-arm/arch-at91/at91sam926x_mc.h
+ *
+ * Memory Controllers (SMC, SDRAMC) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM926x_MC_H
+#define AT91SAM926x_MC_H
+
+/* SDRAM Controller (SDRAMC) registers */
+#define AT91_SDRAMC_MR		(AT91_SDRAMC + 0x00)	/* SDRAM Controller Mode Register */
+#define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
+#define			AT91_SDRAMC_MODE_NORMAL		0
+#define			AT91_SDRAMC_MODE_NOP		1
+#define			AT91_SDRAMC_MODE_PRECHARGE	2
+#define			AT91_SDRAMC_MODE_LMR		3
+#define			AT91_SDRAMC_MODE_REFRESH	4
+#define			AT91_SDRAMC_MODE_EXT_LMR	5
+#define			AT91_SDRAMC_MODE_DEEP		6
+
+#define AT91_SDRAMC_TR		(AT91_SDRAMC + 0x04)	/* SDRAM Controller Refresh Timer Register */
+#define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
+
+#define AT91_SDRAMC_CR		(AT91_SDRAMC + 0x08)	/* SDRAM Controller Configuration Register */
+#define		AT91_SDRAMC_NC		(3 << 0)		/* Number of Column Bits */
+#define			AT91_SDRAMC_NC_8	(0 << 0)
+#define			AT91_SDRAMC_NC_9	(1 << 0)
+#define			AT91_SDRAMC_NC_10	(2 << 0)
+#define			AT91_SDRAMC_NC_11	(3 << 0)
+#define		AT91_SDRAMC_NR		(3 << 2)		/* Number of Row Bits */
+#define			AT91_SDRAMC_NR_11	(0 << 2)
+#define			AT91_SDRAMC_NR_12	(1 << 2)
+#define			AT91_SDRAMC_NR_13	(2 << 2)
+#define		AT91_SDRAMC_NB		(1 << 4)		/* Number of Banks */
+#define			AT91_SDRAMC_NB_2	(0 << 4)
+#define			AT91_SDRAMC_NB_4	(1 << 4)
+#define		AT91_SDRAMC_CAS		(3 << 5)		/* CAS Latency */
+#define			AT91_SDRAMC_CAS_1	(1 << 5)
+#define			AT91_SDRAMC_CAS_2	(2 << 5)
+#define			AT91_SDRAMC_CAS_3	(3 << 5)
+#define		AT91_SDRAMC_DBW		(1 << 7)		/* Data Bus Width */
+#define			AT91_SDRAMC_DBW_32	(0 << 7)
+#define			AT91_SDRAMC_DBW_16	(1 << 7)
+#define		AT91_SDRAMC_TWR		(0xf <<  8)		/* Write Recovery Delay */
+#define		AT91_SDRAMC_TRC		(0xf << 12)		/* Row Cycle Delay */
+#define		AT91_SDRAMC_TRP		(0xf << 16)		/* Row Precharge Delay */
+#define		AT91_SDRAMC_TRCD	(0xf << 20)		/* Row to Column Delay */
+#define		AT91_SDRAMC_TRAS	(0xf << 24)		/* Active to Precharge Delay */
+#define		AT91_SDRAMC_TXSR	(0xf << 28)		/* Exit Self Refresh to Active Delay */
+
+#define AT91_SDRAMC_LPR		(AT91_SDRAMC + 0x10)	/* SDRAM Controller Low Power Register */
+#define		AT91_SDRAMC_LPCB		(3 << 0)	/* Low-power Configurations */
+#define			AT91_SDRAMC_LPCB_DISABLE		0
+#define			AT91_SDRAMC_LPCB_SELF_REFRESH		1
+#define			AT91_SDRAMC_LPCB_POWER_DOWN		2
+#define			AT91_SDRAMC_LPCB_DEEP_POWER_DOWN	3
+#define		AT91_SDRAMC_PASR		(7 << 4)	/* Partial Array Self Refresh */
+#define		AT91_SDRAMC_TCSR		(3 << 8)	/* Temperature Compensated Self Refresh */
+#define		AT91_SDRAMC_DS			(3 << 10)	/* Drive Strenght */
+#define		AT91_SDRAMC_TIMEOUT		(3 << 12)	/* Time to define when Low Power Mode is enabled */
+#define			AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
+#define			AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
+#define			AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
+
+#define AT91_SDRAMC_IER		(AT91_SDRAMC + 0x14)	/* SDRAM Controller Interrupt Enable Register */
+#define AT91_SDRAMC_IDR		(AT91_SDRAMC + 0x18)	/* SDRAM Controller Interrupt Disable Register */
+#define AT91_SDRAMC_IMR		(AT91_SDRAMC + 0x1C)	/* SDRAM Controller Interrupt Mask Register */
+#define AT91_SDRAMC_ISR		(AT91_SDRAMC + 0x20)	/* SDRAM Controller Interrupt Status Register */
+#define		AT91_SDRAMC_RES		(1 << 0)		/* Refresh Error Status */
+
+#define AT91_SDRAMC_MDR		(AT91_SDRAMC + 0x24)	/* SDRAM Memory Device Register */
+#define		AT91_SDRAMC_MD		(3 << 0)		/* Memory Device Type */
+#define			AT91_SDRAMC_MD_SDRAM		0
+#define			AT91_SDRAMC_MD_LOW_POWER_SDRAM	1
+
+
+/* Static Memory Controller (SMC) registers */
+#define AT91_SMC_SETUP(n)	(AT91_SMC + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
+#define		AT91_SMC_NWESETUP	(0x3f << 0)			/* NWE Setup Length */
+#define			AT91_SMC_NWESETUP_(x)	((x) << 0)
+#define		AT91_SMC_NCS_WRSETUP	(0x3f << 8)			/* NCS Setup Length in Write Access */
+#define			AT91_SMC_NCS_WRSETUP_(x)	((x) << 8)
+#define		AT91_SMC_NRDSETUP	(0x3f << 16)			/* NRD Setup Length */
+#define			AT91_SMC_NRDSETUP_(x)	((x) << 16)
+#define		AT91_SMC_NCS_RDSETUP	(0x3f << 24)			/* NCS Setup Length in Read Access */
+#define			AT91_SMC_NCS_RDSETUP_(x)	((x) << 24)
+
+#define AT91_SMC_PULSE(n)	(AT91_SMC + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
+#define		AT91_SMC_NWEPULSE	(0x7f <<  0)			/* NWE Pulse Length */
+#define			AT91_SMC_NWEPULSE_(x)	((x) << 0)
+#define		AT91_SMC_NCS_WRPULSE	(0x7f <<  8)			/* NCS Pulse Length in Write Access */
+#define			AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
+#define		AT91_SMC_NRDPULSE	(0x7f << 16)			/* NRD Pulse Length */
+#define			AT91_SMC_NRDPULSE_(x)	((x) << 16)
+#define		AT91_SMC_NCS_RDPULSE	(0x7f << 24)			/* NCS Pulse Length in Read Access */
+#define			AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
+
+#define AT91_SMC_CYCLE(n)	(AT91_SMC + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
+#define		AT91_SMC_NWECYCLE	(0x1ff << 0 )			/* Total Write Cycle Length */
+#define			AT91_SMC_NWECYCLE_(x)	((x) << 0)
+#define		AT91_SMC_NRDCYCLE	(0x1ff << 16)			/* Total Read Cycle Length */
+#define			AT91_SMC_NRDCYCLE_(x)	((x) << 16)
+
+#define AT91_SMC_MODE(n)	(AT91_SMC + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
+#define		AT91_SMC_READMODE	(1 <<  0)			/* Read Mode */
+#define		AT91_SMC_WRITEMODE	(1 <<  1)			/* Write Mode */
+#define		AT91_SMC_EXNWMODE	(3 <<  4)			/* NWAIT Mode */
+#define			AT91_SMC_EXNWMODE_DISABLE	(0 << 4)
+#define			AT91_SMC_EXNWMODE_FROZEN	(2 << 4)
+#define			AT91_SMC_EXNWMODE_READY		(3 << 4)
+#define		AT91_SMC_BAT		(1 <<  8)			/* Byte Access Type */
+#define			AT91_SMC_BAT_SELECT		(0 << 8)
+#define			AT91_SMC_BAT_WRITE		(1 << 8)
+#define		AT91_SMC_DBW		(3 << 12)			/* Data Bus Width */
+#define			AT91_SMC_DBW_8			(0 << 12)
+#define			AT91_SMC_DBW_16			(1 << 12)
+#define			AT91_SMC_DBW_32			(2 << 12)
+#define		AT91_SMC_TDF		(0xf << 16)			/* Data Float Time. */
+#define			AT91_SMC_TDF_(x)		((x) << 16)
+#define		AT91_SMC_TDFMODE	(1 << 20)			/* TDF Optimization - Enabled */
+#define		AT91_SMC_PMEN		(1 << 24)			/* Page Mode Enabled */
+#define		AT91_SMC_PS		(3 << 28)			/* Page Size */
+#define			AT91_SMC_PS_4			(0 << 28)
+#define			AT91_SMC_PS_8			(1 << 28)
+#define			AT91_SMC_PS_16			(2 << 28)
+#define			AT91_SMC_PS_32			(3 << 28)
+
+#endif
diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h
new file mode 100644
index 0000000..bf1afd0
--- /dev/null
+++ b/include/asm-arm/arch-at91/board.h
@@ -0,0 +1,121 @@
+/*
+ * include/asm-arm/arch-at91/board.h
+ *
+ *  Copyright (C) 2005 HP Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * These are data structures found in platform_device.dev.platform_data,
+ * and describing board-specific data needed by drivers.  For example,
+ * which pin is used for a given GPIO role.
+ *
+ * In 2.6, drivers should strongly avoid board-specific knowledge so
+ * that supporting new boards normally won't require driver patches.
+ * Most board-specific knowledge should be in arch/.../board-*.c files.
+ */
+
+#ifndef __ASM_ARCH_BOARD_H
+#define __ASM_ARCH_BOARD_H
+
+#include <linux/mtd/partitions.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+
+ /* USB Device */
+struct at91_udc_data {
+	u8	vbus_pin;		/* high == host powering us */
+	u8	pullup_pin;		/* high == D+ pulled up */
+};
+extern void __init at91_add_device_udc(struct at91_udc_data *data);
+
+ /* Compact Flash */
+struct at91_cf_data {
+	u8	irq_pin;		/* I/O IRQ */
+	u8	det_pin;		/* Card detect */
+	u8	vcc_pin;		/* power switching */
+	u8	rst_pin;		/* card reset */
+	u8	chipselect;		/* EBI Chip Select number */
+};
+extern void __init at91_add_device_cf(struct at91_cf_data *data);
+
+ /* MMC / SD */
+struct at91_mmc_data {
+	u8		det_pin;	/* card detect IRQ */
+	unsigned	slot_b:1;	/* uses Slot B */
+	unsigned	wire4:1;	/* (SD) supports DAT0..DAT3 */
+	u8		wp_pin;		/* (SD) writeprotect detect */
+	u8		vcc_pin;	/* power switching (high == on) */
+};
+extern void __init at91_add_device_mmc(struct at91_mmc_data *data);
+
+ /* Ethernet */
+struct at91_eth_data {
+	u8		phy_irq_pin;	/* PHY IRQ */
+	u8		is_rmii;	/* using RMII interface? */
+};
+extern void __init at91_add_device_eth(struct at91_eth_data *data);
+
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263)
+#define eth_platform_data	at91_eth_data
+#endif
+
+ /* USB Host */
+struct at91_usbh_data {
+	u8		ports;		/* number of ports on root hub */
+};
+extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
+
+ /* NAND / SmartMedia */
+struct at91_nand_data {
+	u8		enable_pin;	/* chip enable */
+	u8		det_pin;	/* card detect */
+	u8		rdy_pin;	/* ready/busy */
+	u8		ale;		/* address line number connected to ALE */
+	u8		cle;		/* address line number connected to CLE */
+	u8		bus_width_16;	/* buswidth is 16 bit */
+	struct mtd_partition* (*partition_info)(int, int*);
+};
+extern void __init at91_add_device_nand(struct at91_nand_data *data);
+
+ /* I2C*/
+extern void __init at91_add_device_i2c(void);
+
+ /* SPI */
+extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
+
+ /* Serial */
+struct at91_uart_config {
+	unsigned short	console_tty;	/* tty number of serial console */
+	unsigned short	nr_tty;		/* number of serial tty's */
+	short		tty_map[];	/* map UART to tty number */
+};
+extern struct platform_device *atmel_default_console_device;
+extern void __init at91_init_serial(struct at91_uart_config *config);
+
+struct atmel_uart_data {
+	short		use_dma_tx;	/* use transmit DMA? */
+	short		use_dma_rx;	/* use receive DMA? */
+	void __iomem	*regs;		/* virtual base address, if any */
+};
+extern void __init at91_add_device_serial(void);
+
+ /* LEDs */
+extern u8 at91_leds_cpu;
+extern u8 at91_leds_timer;
+extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
+
+#endif
diff --git a/include/asm-arm/arch-at91/cpu.h b/include/asm-arm/arch-at91/cpu.h
new file mode 100644
index 0000000..762eb41
--- /dev/null
+++ b/include/asm-arm/arch-at91/cpu.h
@@ -0,0 +1,49 @@
+/*
+ * include/asm-arm/arch-at91/cpu.h
+ *
+ *  Copyright (C) 2006 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_CPU_H
+#define __ASM_ARCH_CPU_H
+
+#include <asm/hardware.h>
+#include <asm/arch/at91_dbgu.h>
+
+
+#define ARCH_ID_AT91RM9200	0x09290780
+#define ARCH_ID_AT91SAM9260	0x019803a0
+#define ARCH_ID_AT91SAM9261	0x019703a0
+
+
+static inline unsigned long at91_cpu_identify(void)
+{
+	return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
+}
+
+
+#ifdef CONFIG_ARCH_AT91RM9200
+#define cpu_is_at91rm9200()	(at91_cpu_identify() == ARCH_ID_AT91RM9200)
+#else
+#define cpu_is_at91rm9200()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9260
+#define cpu_is_at91sam9260()	(at91_cpu_identify() == ARCH_ID_AT91SAM9260)
+#else
+#define cpu_is_at91sam9260()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9261
+#define cpu_is_at91sam9261()	(at91_cpu_identify() == ARCH_ID_AT91SAM9261)
+#else
+#define cpu_is_at91sam9261()	(0)
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-at91/debug-macro.S b/include/asm-arm/arch-at91/debug-macro.S
new file mode 100644
index 0000000..20721ef
--- /dev/null
+++ b/include/asm-arm/arch-at91/debug-macro.S
@@ -0,0 +1,39 @@
+/*
+ * include/asm-arm/arch-at91/debug-macro.S
+ *
+ *  Copyright (C) 2003-2005 SAN People
+ *
+ * Debugging macro include header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <asm/hardware.h>
+#include <asm/arch/at91_dbgu.h>
+
+	.macro	addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1				@ MMU enabled?
+	ldreq	\rx, =AT91_BASE_SYS		@ System peripherals (phys address)
+	ldrne	\rx, =AT91_VA_BASE_SYS		@ System peripherals (virt address)
+	.endm
+
+	.macro	senduart,rd,rx
+	strb	\rd, [\rx, #AT91_DBGU_THR]	@ Write to Transmitter Holding Register
+	.endm
+
+	.macro	waituart,rd,rx
+1001:	ldr	\rd, [\rx, #AT91_DBGU_SR]	@ Read Status Register
+	tst	\rd, #AT91_DBGU_TXRDY		@ DBGU_TXRDY = 1 when ready to transmit
+	beq	1001b
+	.endm
+
+	.macro	busyuart,rd,rx
+1001:	ldr	\rd, [\rx, #AT91_DBGU_SR]	@ Read Status Register
+	tst	\rd, #AT91_DBGU_TXEMPTY		@ DBGU_TXEMPTY = 1 when transmission complete
+	beq	1001b
+	.endm
+
diff --git a/include/asm-arm/arch-at91/dma.h b/include/asm-arm/arch-at91/dma.h
new file mode 100644
index 0000000..7745654
--- /dev/null
+++ b/include/asm-arm/arch-at91/dma.h
@@ -0,0 +1,19 @@
+/*
+ * include/asm-arm/arch-at91/dma.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/include/asm-arm/arch-at91/entry-macro.S b/include/asm-arm/arch-at91/entry-macro.S
new file mode 100644
index 0000000..a6f3383
--- /dev/null
+++ b/include/asm-arm/arch-at91/entry-macro.S
@@ -0,0 +1,26 @@
+/*
+ * include/asm-arm/arch-at91/entry-macro.S
+ *
+ *  Copyright (C) 2003-2005 SAN People
+ *
+ * Low-level IRQ helper macros for AT91RM9200 platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/hardware.h>
+#include <asm/arch/at91_aic.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr	\base, =(AT91_VA_BASE_SYS)		@ base virtual address of SYS peripherals
+	ldr	\irqnr, [\base, #AT91_AIC_IVR]		@ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
+	ldr	\irqstat, [\base, #AT91_AIC_ISR]	@ read interrupt source number
+	teq	\irqstat, #0				@ ISR is 0 when no current interrupt, or spurious interrupt
+	streq	\tmp, [\base, #AT91_AIC_EOICR]		@ not going to be handled further, then ACK it now.
+	.endm
+
diff --git a/include/asm-arm/arch-at91/gpio.h b/include/asm-arm/arch-at91/gpio.h
new file mode 100644
index 0000000..6d1a5eb
--- /dev/null
+++ b/include/asm-arm/arch-at91/gpio.h
@@ -0,0 +1,199 @@
+/*
+ * include/asm-arm/arch-at91/gpio.h
+ *
+ *  Copyright (C) 2005 HP Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_AT91RM9200_GPIO_H
+#define __ASM_ARCH_AT91RM9200_GPIO_H
+
+#include <asm/irq.h>
+
+#define PIN_BASE		NR_AIC_IRQS
+
+#define MAX_GPIO_BANKS		4
+
+/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
+
+#define	AT91_PIN_PA0	(PIN_BASE + 0x00 + 0)
+#define	AT91_PIN_PA1	(PIN_BASE + 0x00 + 1)
+#define	AT91_PIN_PA2	(PIN_BASE + 0x00 + 2)
+#define	AT91_PIN_PA3	(PIN_BASE + 0x00 + 3)
+#define	AT91_PIN_PA4	(PIN_BASE + 0x00 + 4)
+
+#define	AT91_PIN_PA5	(PIN_BASE + 0x00 + 5)
+#define	AT91_PIN_PA6	(PIN_BASE + 0x00 + 6)
+#define	AT91_PIN_PA7	(PIN_BASE + 0x00 + 7)
+#define	AT91_PIN_PA8	(PIN_BASE + 0x00 + 8)
+#define	AT91_PIN_PA9	(PIN_BASE + 0x00 + 9)
+
+#define	AT91_PIN_PA10	(PIN_BASE + 0x00 + 10)
+#define	AT91_PIN_PA11	(PIN_BASE + 0x00 + 11)
+#define	AT91_PIN_PA12	(PIN_BASE + 0x00 + 12)
+#define	AT91_PIN_PA13	(PIN_BASE + 0x00 + 13)
+#define	AT91_PIN_PA14	(PIN_BASE + 0x00 + 14)
+
+#define	AT91_PIN_PA15	(PIN_BASE + 0x00 + 15)
+#define	AT91_PIN_PA16	(PIN_BASE + 0x00 + 16)
+#define	AT91_PIN_PA17	(PIN_BASE + 0x00 + 17)
+#define	AT91_PIN_PA18	(PIN_BASE + 0x00 + 18)
+#define	AT91_PIN_PA19	(PIN_BASE + 0x00 + 19)
+
+#define	AT91_PIN_PA20	(PIN_BASE + 0x00 + 20)
+#define	AT91_PIN_PA21	(PIN_BASE + 0x00 + 21)
+#define	AT91_PIN_PA22	(PIN_BASE + 0x00 + 22)
+#define	AT91_PIN_PA23	(PIN_BASE + 0x00 + 23)
+#define	AT91_PIN_PA24	(PIN_BASE + 0x00 + 24)
+
+#define	AT91_PIN_PA25	(PIN_BASE + 0x00 + 25)
+#define	AT91_PIN_PA26	(PIN_BASE + 0x00 + 26)
+#define	AT91_PIN_PA27	(PIN_BASE + 0x00 + 27)
+#define	AT91_PIN_PA28	(PIN_BASE + 0x00 + 28)
+#define	AT91_PIN_PA29	(PIN_BASE + 0x00 + 29)
+
+#define	AT91_PIN_PA30	(PIN_BASE + 0x00 + 30)
+#define	AT91_PIN_PA31	(PIN_BASE + 0x00 + 31)
+
+#define	AT91_PIN_PB0	(PIN_BASE + 0x20 + 0)
+#define	AT91_PIN_PB1	(PIN_BASE + 0x20 + 1)
+#define	AT91_PIN_PB2	(PIN_BASE + 0x20 + 2)
+#define	AT91_PIN_PB3	(PIN_BASE + 0x20 + 3)
+#define	AT91_PIN_PB4	(PIN_BASE + 0x20 + 4)
+
+#define	AT91_PIN_PB5	(PIN_BASE + 0x20 + 5)
+#define	AT91_PIN_PB6	(PIN_BASE + 0x20 + 6)
+#define	AT91_PIN_PB7	(PIN_BASE + 0x20 + 7)
+#define	AT91_PIN_PB8	(PIN_BASE + 0x20 + 8)
+#define	AT91_PIN_PB9	(PIN_BASE + 0x20 + 9)
+
+#define	AT91_PIN_PB10	(PIN_BASE + 0x20 + 10)
+#define	AT91_PIN_PB11	(PIN_BASE + 0x20 + 11)
+#define	AT91_PIN_PB12	(PIN_BASE + 0x20 + 12)
+#define	AT91_PIN_PB13	(PIN_BASE + 0x20 + 13)
+#define	AT91_PIN_PB14	(PIN_BASE + 0x20 + 14)
+
+#define	AT91_PIN_PB15	(PIN_BASE + 0x20 + 15)
+#define	AT91_PIN_PB16	(PIN_BASE + 0x20 + 16)
+#define	AT91_PIN_PB17	(PIN_BASE + 0x20 + 17)
+#define	AT91_PIN_PB18	(PIN_BASE + 0x20 + 18)
+#define	AT91_PIN_PB19	(PIN_BASE + 0x20 + 19)
+
+#define	AT91_PIN_PB20	(PIN_BASE + 0x20 + 20)
+#define	AT91_PIN_PB21	(PIN_BASE + 0x20 + 21)
+#define	AT91_PIN_PB22	(PIN_BASE + 0x20 + 22)
+#define	AT91_PIN_PB23	(PIN_BASE + 0x20 + 23)
+#define	AT91_PIN_PB24	(PIN_BASE + 0x20 + 24)
+
+#define	AT91_PIN_PB25	(PIN_BASE + 0x20 + 25)
+#define	AT91_PIN_PB26	(PIN_BASE + 0x20 + 26)
+#define	AT91_PIN_PB27	(PIN_BASE + 0x20 + 27)
+#define	AT91_PIN_PB28	(PIN_BASE + 0x20 + 28)
+#define	AT91_PIN_PB29	(PIN_BASE + 0x20 + 29)
+
+#define	AT91_PIN_PB30	(PIN_BASE + 0x20 + 30)
+#define	AT91_PIN_PB31	(PIN_BASE + 0x20 + 31)
+
+#define	AT91_PIN_PC0	(PIN_BASE + 0x40 + 0)
+#define	AT91_PIN_PC1	(PIN_BASE + 0x40 + 1)
+#define	AT91_PIN_PC2	(PIN_BASE + 0x40 + 2)
+#define	AT91_PIN_PC3	(PIN_BASE + 0x40 + 3)
+#define	AT91_PIN_PC4	(PIN_BASE + 0x40 + 4)
+
+#define	AT91_PIN_PC5	(PIN_BASE + 0x40 + 5)
+#define	AT91_PIN_PC6	(PIN_BASE + 0x40 + 6)
+#define	AT91_PIN_PC7	(PIN_BASE + 0x40 + 7)
+#define	AT91_PIN_PC8	(PIN_BASE + 0x40 + 8)
+#define	AT91_PIN_PC9	(PIN_BASE + 0x40 + 9)
+
+#define	AT91_PIN_PC10	(PIN_BASE + 0x40 + 10)
+#define	AT91_PIN_PC11	(PIN_BASE + 0x40 + 11)
+#define	AT91_PIN_PC12	(PIN_BASE + 0x40 + 12)
+#define	AT91_PIN_PC13	(PIN_BASE + 0x40 + 13)
+#define	AT91_PIN_PC14	(PIN_BASE + 0x40 + 14)
+
+#define	AT91_PIN_PC15	(PIN_BASE + 0x40 + 15)
+#define	AT91_PIN_PC16	(PIN_BASE + 0x40 + 16)
+#define	AT91_PIN_PC17	(PIN_BASE + 0x40 + 17)
+#define	AT91_PIN_PC18	(PIN_BASE + 0x40 + 18)
+#define	AT91_PIN_PC19	(PIN_BASE + 0x40 + 19)
+
+#define	AT91_PIN_PC20	(PIN_BASE + 0x40 + 20)
+#define	AT91_PIN_PC21	(PIN_BASE + 0x40 + 21)
+#define	AT91_PIN_PC22	(PIN_BASE + 0x40 + 22)
+#define	AT91_PIN_PC23	(PIN_BASE + 0x40 + 23)
+#define	AT91_PIN_PC24	(PIN_BASE + 0x40 + 24)
+
+#define	AT91_PIN_PC25	(PIN_BASE + 0x40 + 25)
+#define	AT91_PIN_PC26	(PIN_BASE + 0x40 + 26)
+#define	AT91_PIN_PC27	(PIN_BASE + 0x40 + 27)
+#define	AT91_PIN_PC28	(PIN_BASE + 0x40 + 28)
+#define	AT91_PIN_PC29	(PIN_BASE + 0x40 + 29)
+
+#define	AT91_PIN_PC30	(PIN_BASE + 0x40 + 30)
+#define	AT91_PIN_PC31	(PIN_BASE + 0x40 + 31)
+
+#define	AT91_PIN_PD0	(PIN_BASE + 0x60 + 0)
+#define	AT91_PIN_PD1	(PIN_BASE + 0x60 + 1)
+#define	AT91_PIN_PD2	(PIN_BASE + 0x60 + 2)
+#define	AT91_PIN_PD3	(PIN_BASE + 0x60 + 3)
+#define	AT91_PIN_PD4	(PIN_BASE + 0x60 + 4)
+
+#define	AT91_PIN_PD5	(PIN_BASE + 0x60 + 5)
+#define	AT91_PIN_PD6	(PIN_BASE + 0x60 + 6)
+#define	AT91_PIN_PD7	(PIN_BASE + 0x60 + 7)
+#define	AT91_PIN_PD8	(PIN_BASE + 0x60 + 8)
+#define	AT91_PIN_PD9	(PIN_BASE + 0x60 + 9)
+
+#define	AT91_PIN_PD10	(PIN_BASE + 0x60 + 10)
+#define	AT91_PIN_PD11	(PIN_BASE + 0x60 + 11)
+#define	AT91_PIN_PD12	(PIN_BASE + 0x60 + 12)
+#define	AT91_PIN_PD13	(PIN_BASE + 0x60 + 13)
+#define	AT91_PIN_PD14	(PIN_BASE + 0x60 + 14)
+
+#define	AT91_PIN_PD15	(PIN_BASE + 0x60 + 15)
+#define	AT91_PIN_PD16	(PIN_BASE + 0x60 + 16)
+#define	AT91_PIN_PD17	(PIN_BASE + 0x60 + 17)
+#define	AT91_PIN_PD18	(PIN_BASE + 0x60 + 18)
+#define	AT91_PIN_PD19	(PIN_BASE + 0x60 + 19)
+
+#define	AT91_PIN_PD20	(PIN_BASE + 0x60 + 20)
+#define	AT91_PIN_PD21	(PIN_BASE + 0x60 + 21)
+#define	AT91_PIN_PD22	(PIN_BASE + 0x60 + 22)
+#define	AT91_PIN_PD23	(PIN_BASE + 0x60 + 23)
+#define	AT91_PIN_PD24	(PIN_BASE + 0x60 + 24)
+
+#define	AT91_PIN_PD25	(PIN_BASE + 0x60 + 25)
+#define	AT91_PIN_PD26	(PIN_BASE + 0x60 + 26)
+#define	AT91_PIN_PD27	(PIN_BASE + 0x60 + 27)
+#define	AT91_PIN_PD28	(PIN_BASE + 0x60 + 28)
+#define	AT91_PIN_PD29	(PIN_BASE + 0x60 + 29)
+
+#define	AT91_PIN_PD30	(PIN_BASE + 0x60 + 30)
+#define	AT91_PIN_PD31	(PIN_BASE + 0x60 + 31)
+
+#ifndef __ASSEMBLY__
+/* setup setup routines, called from board init or driver probe() */
+extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_gpio_output(unsigned pin, int value);
+extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on);
+extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on);
+
+/* callable at any time */
+extern int at91_set_gpio_value(unsigned pin, int value);
+extern int at91_get_gpio_value(unsigned pin);
+
+/* callable only from core power-management code */
+extern void at91_gpio_suspend(void);
+extern void at91_gpio_resume(void);
+#endif
+
+#endif
+
diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h
new file mode 100644
index 0000000..ccb7c72
--- /dev/null
+++ b/include/asm-arm/arch-at91/hardware.h
@@ -0,0 +1,88 @@
+/*
+ * include/asm-arm/arch-at91/hardware.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *  Copyright (C) 2003 ATMEL
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+
+#if defined(CONFIG_ARCH_AT91RM9200)
+#include <asm/arch/at91rm9200.h>
+#elif defined(CONFIG_ARCH_AT91SAM9260)
+#include <asm/arch/at91sam9260.h>
+#elif defined(CONFIG_ARCH_AT91SAM9261)
+#include <asm/arch/at91sam9261.h>
+#else
+#error "Unsupported AT91 processor"
+#endif
+
+
+/*
+ * Remap the peripherals from address 0xFFFA0000 .. 0xFFFFFFFF
+ * to 0xFEFA0000 .. 0xFF000000.  (384Kb)
+ */
+#define AT91_IO_PHYS_BASE	0xFFFA0000
+#define AT91_IO_SIZE		(0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
+#define AT91_IO_VIRT_BASE	(0xFF000000 - AT91_IO_SIZE)
+
+ /* Convert a physical IO address to virtual IO address */
+#define AT91_IO_P2V(x)	((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
+
+/*
+ * Virtual to Physical Address mapping for IO devices.
+ */
+#define AT91_VA_BASE_SYS	AT91_IO_P2V(AT91_BASE_SYS)
+#define AT91_VA_BASE_EMAC	AT91_IO_P2V(AT91RM9200_BASE_EMAC)
+
+ /* Internal SRAM is mapped below the IO devices */
+#define AT91_SRAM_MAX		SZ_1M
+#define AT91_VIRT_BASE		(AT91_IO_VIRT_BASE - AT91_SRAM_MAX)
+
+/* Serial ports */
+#define ATMEL_MAX_UART		7		/* 6 USART3's and one DBGU port (SAM9260) */
+
+/* External Memory Map */
+#define AT91_CHIPSELECT_0	0x10000000
+#define AT91_CHIPSELECT_1	0x20000000
+#define AT91_CHIPSELECT_2	0x30000000
+#define AT91_CHIPSELECT_3	0x40000000
+#define AT91_CHIPSELECT_4	0x50000000
+#define AT91_CHIPSELECT_5	0x60000000
+#define AT91_CHIPSELECT_6	0x70000000
+#define AT91_CHIPSELECT_7	0x80000000
+
+/* SDRAM */
+#define AT91_SDRAM_BASE		AT91_CHIPSELECT_1
+
+/* Clocks */
+#define AT91_SLOW_CLOCK		32768		/* slow clock */
+
+#ifndef __ASSEMBLY__
+#include <asm/io.h>
+
+static inline unsigned int at91_sys_read(unsigned int reg_offset)
+{
+	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
+
+	return __raw_readl(addr + reg_offset);
+}
+
+static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
+{
+	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
+
+	__raw_writel(value, addr + reg_offset);
+}
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-at91/io.h b/include/asm-arm/arch-at91/io.h
new file mode 100644
index 0000000..401f327
--- /dev/null
+++ b/include/asm-arm/arch-at91/io.h
@@ -0,0 +1,32 @@
+/*
+ * include/asm-arm/arch-at91/io.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include <asm/io.h>
+
+#define IO_SPACE_LIMIT		0xFFFFFFFF
+
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+
+#endif
diff --git a/include/asm-arm/arch-at91/irqs.h b/include/asm-arm/arch-at91/irqs.h
new file mode 100644
index 0000000..f041c98
--- /dev/null
+++ b/include/asm-arm/arch-at91/irqs.h
@@ -0,0 +1,44 @@
+/*
+ * include/asm-arm/arch-at91/irqs.h
+ *
+ *  Copyright (C) 2004 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include <asm/arch/at91_aic.h>
+
+#define NR_AIC_IRQS 32
+
+
+/*
+ * Acknowledge interrupt with AIC after interrupt has been handled.
+ *   (by kernel/irq.c)
+ */
+#define irq_finish(irq) do { at91_sys_write(AT91_AIC_EOICR, 0); } while (0)
+
+
+/*
+ * IRQ interrupt symbols are the AT91xxx_ID_* symbols
+ * for IRQs handled directly through the AIC, or else the AT91_PIN_*
+ * symbols in gpio.h for ones handled indirectly as GPIOs.
+ * We make provision for 4 banks of GPIO.
+ */
+#define	NR_IRQS		(NR_AIC_IRQS + (4 * 32))
+
+#endif
diff --git a/include/asm-arm/arch-at91/memory.h b/include/asm-arm/arch-at91/memory.h
new file mode 100644
index 0000000..4835d67
--- /dev/null
+++ b/include/asm-arm/arch-at91/memory.h
@@ -0,0 +1,39 @@
+/*
+ * include/asm-arm/arch-at91/memory.h
+ *
+ *  Copyright (C) 2004 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <asm/hardware.h>
+
+#define PHYS_OFFSET	(AT91_SDRAM_BASE)
+
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/include/asm-arm/arch-at91/system.h b/include/asm-arm/arch-at91/system.h
new file mode 100644
index 0000000..6bf8460
--- /dev/null
+++ b/include/asm-arm/arch-at91/system.h
@@ -0,0 +1,53 @@
+/*
+ * include/asm-arm/arch-at91/system.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/hardware.h>
+#include <asm/arch/at91_st.h>
+#include <asm/arch/at91_dbgu.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * Disable the processor clock.  The processor will be automatically
+	 * re-enabled by an interrupt or by a reset.
+	 */
+//	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+
+	/*
+	 * Set the processor (CP15) into 'Wait for Interrupt' mode.
+	 * Unlike disabling the processor clock via the PMC (above)
+	 *  this allows the processor to be woken via JTAG.
+	 */
+	cpu_do_idle();
+}
+
+void (*at91_arch_reset)(void);
+
+static inline void arch_reset(char mode)
+{
+	/* call the CPU-specific reset function */
+	if (at91_arch_reset)
+		(at91_arch_reset)();
+}
+
+#endif
diff --git a/include/asm-arm/arch-at91/timex.h b/include/asm-arm/arch-at91/timex.h
new file mode 100644
index 0000000..b24e364
--- /dev/null
+++ b/include/asm-arm/arch-at91/timex.h
@@ -0,0 +1,37 @@
+/*
+ * include/asm-arm/arch-at91/timex.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#include <asm/hardware.h>
+
+#if defined(CONFIG_ARCH_AT91RM9200)
+
+#define CLOCK_TICK_RATE		(AT91_SLOW_CLOCK)
+
+#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9261)
+
+#define AT91SAM9_MASTER_CLOCK	99300000
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-at91/uncompress.h b/include/asm-arm/arch-at91/uncompress.h
new file mode 100644
index 0000000..a193d28
--- /dev/null
+++ b/include/asm-arm/arch-at91/uncompress.h
@@ -0,0 +1,56 @@
+/*
+ * include/asm-arm/arch-at91/uncompress.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/hardware.h>
+#include <asm/arch/at91_dbgu.h>
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader.  If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
+ * This does not append a newline
+ */
+static void putc(int c)
+{
+	void __iomem *sys = (void __iomem *) AT91_BASE_SYS;	/* physical address */
+
+	while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXRDY))
+		barrier();
+	__raw_writel(c, sys + AT91_DBGU_THR);
+}
+
+static inline void flush(void)
+{
+	void __iomem *sys = (void __iomem *) AT91_BASE_SYS;	/* physical address */
+
+	/* wait for transmission to complete */
+	while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXEMPTY))
+		barrier();
+}
+
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
+
+#endif
diff --git a/include/asm-arm/arch-at91/vmalloc.h b/include/asm-arm/arch-at91/vmalloc.h
new file mode 100644
index 0000000..bb05e70
--- /dev/null
+++ b/include/asm-arm/arch-at91/vmalloc.h
@@ -0,0 +1,26 @@
+/*
+ * include/asm-arm/arch-at91/vmalloc.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END		(AT91_VIRT_BASE & PGDIR_MASK)
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_aic.h b/include/asm-arm/arch-at91rm9200/at91_aic.h
deleted file mode 100644
index 267e698..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_aic.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_aic.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Advanced Interrupt Controller (AIC) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_AIC_H
-#define AT91_AIC_H
-
-#define AT91_AIC_SMR(n)		(AT91_AIC + ((n) * 4))	/* Source Mode Registers 0-31 */
-#define		AT91_AIC_PRIOR		(7 << 0)		/* Priority Level */
-#define		AT91_AIC_SRCTYPE	(3 << 5)		/* Interrupt Source Type */
-#define			AT91_AIC_SRCTYPE_LOW		(0 << 5)
-#define			AT91_AIC_SRCTYPE_FALLING	(1 << 5)
-#define			AT91_AIC_SRCTYPE_HIGH		(2 << 5)
-#define			AT91_AIC_SRCTYPE_RISING		(3 << 5)
-
-#define AT91_AIC_SVR(n)		(AT91_AIC + 0x80 + ((n) * 4))	/* Source Vector Registers 0-31 */
-#define AT91_AIC_IVR		(AT91_AIC + 0x100)	/* Interrupt Vector Register */
-#define AT91_AIC_FVR		(AT91_AIC + 0x104)	/* Fast Interrupt Vector Register */
-#define AT91_AIC_ISR		(AT91_AIC + 0x108)	/* Interrupt Status Register */
-#define		AT91_AIC_IRQID		(0x1f << 0)		/* Current Interrupt Identifier */
-
-#define AT91_AIC_IPR		(AT91_AIC + 0x10c)	/* Interrupt Pending Register */
-#define AT91_AIC_IMR		(AT91_AIC + 0x110)	/* Interrupt Mask Register */
-#define AT91_AIC_CISR		(AT91_AIC + 0x114)	/* Core Interrupt Status Register */
-#define		AT91_AIC_NFIQ		(1 << 0)		/* nFIQ Status */
-#define		AT91_AIC_NIRQ		(1 << 1)		/* nIRQ Status */
-
-#define AT91_AIC_IECR		(AT91_AIC + 0x120)	/* Interrupt Enable Command Register */
-#define AT91_AIC_IDCR		(AT91_AIC + 0x124)	/* Interrupt Disable Command Register */
-#define AT91_AIC_ICCR		(AT91_AIC + 0x128)	/* Interrupt Clear Command Register */
-#define AT91_AIC_ISCR		(AT91_AIC + 0x12c)	/* Interrupt Set Command Register */
-#define AT91_AIC_EOICR		(AT91_AIC + 0x130)	/* End of Interrupt Command Register */
-#define AT91_AIC_SPU		(AT91_AIC + 0x134)	/* Spurious Interrupt Vector Register */
-#define AT91_AIC_DCR		(AT91_AIC + 0x138)	/* Debug Control Register */
-#define		AT91_AIC_DCR_PROT	(1 << 0)		/* Protection Mode */
-#define		AT91_AIC_DCR_GMSK	(1 << 1)		/* General Mask */
-
-#define AT91_AIC_FFER		(AT91_AIC + 0x140)	/* Fast Forcing Enable Register [SAM9 only] */
-#define AT91_AIC_FFDR		(AT91_AIC + 0x144)	/* Fast Forcing Disable Register [SAM9 only] */
-#define AT91_AIC_FFSR		(AT91_AIC + 0x148)	/* Fast Forcing Status Register [SAM9 only] */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_dbgu.h b/include/asm-arm/arch-at91rm9200/at91_dbgu.h
deleted file mode 100644
index e4b8b27..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_dbgu.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_dbgu.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Debug Unit (DBGU) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_DBGU_H
-#define AT91_DBGU_H
-
-#define AT91_DBGU_CR		(AT91_DBGU + 0x00)	/* Control Register */
-#define AT91_DBGU_MR		(AT91_DBGU + 0x04)	/* Mode Register */
-#define AT91_DBGU_IER		(AT91_DBGU + 0x08)	/* Interrupt Enable Register */
-#define		AT91_DBGU_TXRDY		(1 << 1)		/* Transmitter Ready */
-#define		AT91_DBGU_TXEMPTY	(1 << 9)		/* Transmitter Empty */
-#define AT91_DBGU_IDR		(AT91_DBGU + 0x0c)	/* Interrupt Disable Register */
-#define AT91_DBGU_IMR		(AT91_DBGU + 0x10)	/* Interrupt Mask Register */
-#define AT91_DBGU_SR		(AT91_DBGU + 0x14)	/* Status Register */
-#define AT91_DBGU_RHR		(AT91_DBGU + 0x18)	/* Receiver Holding Register */
-#define AT91_DBGU_THR		(AT91_DBGU + 0x1c)	/* Transmitter Holding Register */
-#define AT91_DBGU_BRGR		(AT91_DBGU + 0x20)	/* Baud Rate Generator Register */
-
-#define AT91_DBGU_CIDR		(AT91_DBGU + 0x40)	/* Chip ID Register */
-#define AT91_DBGU_EXID		(AT91_DBGU + 0x44)	/* Chip ID Extension Register */
-#define		AT91_CIDR_VERSION	(0x1f << 0)		/* Version of the Device */
-#define		AT91_CIDR_EPROC		(7    << 5)		/* Embedded Processor */
-#define		AT91_CIDR_NVPSIZ	(0xf  << 8)		/* Nonvolatile Program Memory Size */
-#define		AT91_CIDR_NVPSIZ2	(0xf  << 12)		/* Second Nonvolatile Program Memory Size */
-#define		AT91_CIDR_SRAMSIZ	(0xf  << 16)		/* Internal SRAM Size */
-#define		AT91_CIDR_ARCH		(0xff << 20)		/* Architecture Identifier */
-#define		AT91_CIDR_NVPTYP	(7    << 28)		/* Nonvolatile Program Memory Type */
-#define		AT91_CIDR_EXT		(1    << 31)		/* Extension Flag */
-
-#define AT91_DBGU_FNR		(AT91_DBGU + 0x48)	/* Force NTRST Register [SAM9 only] */
-#define		AT91_DBGU_FNTRST	(1 << 0)		/* Force NTRST */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_ecc.h b/include/asm-arm/arch-at91rm9200/at91_ecc.h
deleted file mode 100644
index 5c564ed..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_ecc.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_ecc.h
- *
- * Error Corrected Code Controller (ECC) - System peripherals regsters.
- * Based on AT91SAM9260 datasheet revision B.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef AT91_ECC_H
-#define AT91_ECC_H
-
-#define AT91_ECC_CR		(AT91_ECC + 0x00)	/* Control register */
-#define		AT91_ECC_RST		(1 << 0)		/* Reset parity */
-
-#define AT91_ECC_MR		(AT91_ECC + 0x04)	/* Mode register */
-#define		AT91_ECC_PAGESIZE	(3 << 0)		/* Page Size */
-#define			AT91_ECC_PAGESIZE_528		(0)
-#define			AT91_ECC_PAGESIZE_1056		(1)
-#define			AT91_ECC_PAGESIZE_2112		(2)
-#define			AT91_ECC_PAGESIZE_4224		(3)
-
-#define AT91_ECC_SR		(AT91_ECC + 0x08)	/* Status register */
-#define		AT91_ECC_RECERR		(1 << 0)		/* Recoverable Error */
-#define		AT91_ECC_ECCERR		(1 << 1)		/* ECC Single Bit Error */
-#define		AT91_ECC_MULERR		(1 << 2)		/* Multiple Errors */
-
-#define AT91_ECC_PR		(AT91_ECC + 0x0c)	/* Parity register */
-#define		AT91_ECC_BITADDR	(0xf << 0)		/* Bit Error Address */
-#define		AT91_ECC_WORDADDR	(0xfff << 4)		/* Word Error Address */
-
-#define AT91_ECC_NPR		(AT91_ECC + 0x10)	/* NParity register */
-#define		AT91_ECC_NPARITY	(0xffff << 0)		/* NParity */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_lcdc.h b/include/asm-arm/arch-at91rm9200/at91_lcdc.h
deleted file mode 100644
index 9cbfcdd..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_lcdc.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_lcdc.h
- *
- * LCD Controller (LCDC).
- * Based on AT91SAM9261 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_LCDC_H
-#define AT91_LCDC_H
-
-#define AT91_LCDC_DMABADDR1	0x00		/* DMA Base Address Register 1 */
-#define AT91_LCDC_DMABADDR2	0x04		/* DMA Base Address Register 2 */
-#define AT91_LCDC_DMAFRMPT1	0x08		/* DMA Frame Pointer Register 1 */
-#define AT91_LCDC_DMAFRMPT2	0x0c		/* DMA Frame Pointer Register 2 */
-#define AT91_LCDC_DMAFRMADD1	0x10		/* DMA Frame Address Register 1 */
-#define AT91_LCDC_DMAFRMADD2	0x14		/* DMA Frame Address Register 2 */
-
-#define AT91_LCDC_DMAFRMCFG	0x18		/* DMA Frame Configuration Register */
-#define		AT91_LCDC_FRSIZE	(0x7fffff <<  0)	/* Frame Size */
-#define		AT91_LCDC_BLENGTH	(0x7f     << 24)	/* Burst Length */
-
-#define AT91_LCDC_DMACON	0x1c		/* DMA Control Register */
-#define		AT91_LCDC_DMAEN		(0x1 << 0)	/* DMA Enable */
-#define		AT91_LCDC_DMARST	(0x1 << 1)	/* DMA Reset */
-#define		AT91_LCDC_DMABUSY	(0x1 << 2)	/* DMA Busy */
-
-#define AT91_LCDC_LCDCON1	0x0800		/* LCD Control Register 1 */
-#define		AT91_LCDC_BYPASS	(1     <<  0)	/* Bypass lcd_dotck divider */
-#define		AT91_LCDC_CLKVAL	(0x1ff << 12)	/* Clock Divider */
-#define		AT91_LCDC_LINCNT	(0x7ff << 21)	/* Line Counter */
-
-#define AT91_LCDC_LCDCON2	0x0804		/* LCD Control Register 2 */
-#define		AT91_LCDC_DISTYPE	(3 << 0)	/* Display Type */
-#define			AT91_LCDC_DISTYPE_STNMONO	(0 << 0)
-#define			AT91_LCDC_DISTYPE_STNCOLOR	(1 << 0)
-#define			AT91_LCDC_DISTYPE_TFT		(2 << 0)
-#define		AT91_LCDC_SCANMOD	(1 << 2)	/* Scan Mode */
-#define			AT91_LCDC_SCANMOD_SINGLE	(0 << 2)
-#define			AT91_LCDC_SCANMOD_DUAL		(1 << 2)
-#define		AT91_LCDC_IFWIDTH	(3 << 3)	/*Interface Width */
-#define			AT91_LCDC_IFWIDTH_4		(0 << 3)
-#define			AT91_LCDC_IFWIDTH_8		(1 << 3)
-#define			AT91_LCDC_IFWIDTH_16		(2 << 3)
-#define		AT91_LCDC_PIXELSIZE	(7 << 5)	/* Bits per pixel */
-#define			AT91_LCDC_PIXELSIZE_1		(0 << 5)
-#define			AT91_LCDC_PIXELSIZE_2		(1 << 5)
-#define			AT91_LCDC_PIXELSIZE_4		(2 << 5)
-#define			AT91_LCDC_PIXELSIZE_8		(3 << 5)
-#define			AT91_LCDC_PIXELSIZE_16		(4 << 5)
-#define			AT91_LCDC_PIXELSIZE_24		(5 << 5)
-#define		AT91_LCDC_INVVD		(1 << 8)	/* LCD Data polarity */
-#define			AT91_LCDC_INVVD_NORMAL		(0 << 8)
-#define			AT91_LCDC_INVVD_INVERTED	(1 << 8)
-#define		AT91_LCDC_INVFRAME	(1 << 9 )	/* LCD VSync polarity */
-#define			AT91_LCDC_INVFRAME_NORMAL	(0 << 9)
-#define			AT91_LCDC_INVFRAME_INVERTED	(1 << 9)
-#define		AT91_LCDC_INVLINE	(1 << 10)	/* LCD HSync polarity */
-#define			AT91_LCDC_INVLINE_NORMAL	(0 << 10)
-#define			AT91_LCDC_INVLINE_INVERTED	(1 << 10)
-#define		AT91_LCDC_INVCLK	(1 << 11)	/* LCD dotclk polarity */
-#define			AT91_LCDC_INVCLK_NORMAL		(0 << 11)
-#define			AT91_LCDC_INVCLK_INVERTED	(1 << 11)
-#define		AT91_LCDC_INVDVAL	(1 << 12)	/* LCD dval polarity */
-#define			AT91_LCDC_INVDVAL_NORMAL	(0 << 12)
-#define			AT91_LCDC_INVDVAL_INVERTED	(1 << 12)
-#define		AT91_LCDC_CLKMOD	(1 << 15)	/* LCD dotclk mode */
-#define			AT91_LCDC_CLKMOD_ACTIVEDISPLAY	(0 << 15)
-#define			AT91_LCDC_CLKMOD_ALWAYSACTIVE	(1 << 15)
-#define		AT91_LCDC_MEMOR		(1 << 31)	/* Memory Ordering Format */
-#define			AT91_LCDC_MEMOR_BIG		(0 << 31)
-#define			AT91_LCDC_MEMOR_LITTLE		(1 << 31)
-
-#define AT91_LCDC_TIM1		0x0808		/* LCD Timing Register 1 */
-#define		AT91_LCDC_VFP		(0xff <<  0)	/* Vertical Front Porch */
-#define		AT91_LCDC_VBP		(0xff <<  8)	/* Vertical Back Porch */
-#define		AT91_LCDC_VPW		(0x3f << 16)	/* Vertical Synchronization Pulse Width */
-#define		AT91_LCDC_VHDLY		(0xf  << 24)	/* Vertical to Horizontal Delay */
-
-#define AT91_LCDC_TIM2		0x080c		/* LCD Timing Register 2 */
-#define		AT91_LCDC_HBP		(0xff  <<  0)	/* Horizontal Back Porch */
-#define		AT91_LCDC_HPW		(0x3f  <<  8)	/* Horizontal Synchronization Pulse Width */
-#define		AT91_LCDC_HFP		(0x7ff << 21)	/* Horizontal Front Porch */
-
-#define AT91_LCDC_LCDFRMCFG	0x0810		/* LCD Frame Configuration Register */
-#define		AT91_LCDC_LINEVAL	(0x7ff <<  0)	/* Vertical Size of LCD Module */
-#define		AT91_LCDC_HOZVAL	(0x7ff << 21)	/* Horizontal Size of LCD Module */
-
-#define AT91_LCDC_FIFO		0x0814		/* LCD FIFO Register */
-#define		AT91_LCDC_FIFOTH	(0xffff)	/* FIFO Threshold */
-
-#define AT91_LCDC_DP1_2		0x081c		/* Dithering Pattern DP1_2 Register */
-#define AT91_LCDC_DP4_7		0x0820		/* Dithering Pattern DP4_7 Register */
-#define AT91_LCDC_DP3_5		0x0824		/* Dithering Pattern DP3_5 Register */
-#define AT91_LCDC_DP2_3		0x0828		/* Dithering Pattern DP2_3 Register */
-#define AT91_LCDC_DP5_7		0x082c		/* Dithering Pattern DP5_7 Register */
-#define AT91_LCDC_DP3_4		0x0830		/* Dithering Pattern DP3_4 Register */
-#define AT91_LCDC_DP4_5		0x0834		/* Dithering Pattern DP4_5 Register */
-#define AT91_LCDC_DP6_7		0x0838		/* Dithering Pattern DP6_7 Register */
-#define		AT91_LCDC_DP1_2_VAL	(0xff)
-#define		AT91_LCDC_DP4_7_VAL	(0xfffffff)
-#define		AT91_LCDC_DP3_5_VAL	(0xfffff)
-#define		AT91_LCDC_DP2_3_VAL	(0xfff)
-#define		AT91_LCDC_DP5_7_VAL	(0xfffffff)
-#define		AT91_LCDC_DP3_4_VAL	(0xffff)
-#define		AT91_LCDC_DP4_5_VAL	(0xfffff)
-#define		AT91_LCDC_DP6_7_VAL	(0xfffffff)
-
-#define AT91_LCDC_PWRCON	0x083c		/* Power Control Register */
-#define		AT91_LCDC_PWR		(1    <<  0)	/* LCD Module Power Control */
-#define		AT91_LCDC_GUARDT	(0x7f <<  1)	/* Delay in Frame Period */
-#define		AT91_LCDC_BUSY		(1    << 31)	/* LCD Busy */
-
-#define AT91_LCDC_CONTRAST_CTR	0x0840		/* Contrast Control Register */
-#define		AT91_LCDC_PS		(3 << 0)	/* Contrast Counter Prescaler */
-#define			AT91_LCDC_PS_DIV1		(0 << 0)
-#define			AT91_LCDC_PS_DIV2		(1 << 0)
-#define			AT91_LCDC_PS_DIV4		(2 << 0)
-#define			AT91_LCDC_PS_DIV8		(3 << 0)
-#define		AT91_LCDC_POL		(1 << 2)	/* Polarity of output Pulse */
-#define			AT91_LCDC_POL_NEGATIVE		(0 << 2)
-#define			AT91_LCDC_POL_POSITIVE		(1 << 2)
-#define		AT91_LCDC_ENA		(1 << 3)	/* PWM generator Control */
-#define			AT91_LCDC_ENA_PWMDISABLE	(0 << 3)
-#define			AT91_LCDC_ENA_PWMENABLE		(1 << 3)
-
-#define AT91_LCDC_CONTRAST_VAL	0x0844		/* Contrast Value Register */
-#define		AT91_LCDC_CVAL		(0xff)		/* PWM compare value */
-
-#define AT91_LCDC_IER		0x0848		/* Interrupt Enable Register */
-#define AT91_LCDC_IDR		0x084c		/* Interrupt Disable Register */
-#define AT91_LCDC_IMR		0x0850		/* Interrupt Mask Register */
-#define AT91_LCDC_ISR		0x0854		/* Interrupt Enable Register */
-#define AT91_LCDC_ICR		0x0858		/* Interrupt Clear Register */
-#define		AT91_LCDC_LNI		(1 << 0)	/* Line Interrupt */
-#define		AT91_LCDC_LSTLNI	(1 << 1)	/* Last Line Interrupt */
-#define		AT91_LCDC_EOFI		(1 << 2)	/* DMA End Of Frame Interrupt */
-#define		AT91_LCDC_UFLWI		(1 << 4)	/* FIFO Underflow Interrupt */
-#define		AT91_LCDC_OWRI		(1 << 5)	/* FIFO Overwrite Interrupt */
-#define		AT91_LCDC_MERI		(1 << 6)	/* DMA Memory Error Interrupt */
-
-#define AT91_LCDC_LUT_(n)	(0x0c00 + ((n)*4))	/* Palette Entry 0..255 */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_mci.h b/include/asm-arm/arch-at91rm9200/at91_mci.h
deleted file mode 100644
index 9a552cb..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_mci.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_mci.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * MultiMedia Card Interface (MCI) registers.
- * Based on AT91RM9200 datasheet revision F.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_MCI_H
-#define AT91_MCI_H
-
-#define AT91_MCI_CR		0x00		/* Control Register */
-#define		AT91_MCI_MCIEN		(1 <<  0)	/* Multi-Media Interface Enable */
-#define		AT91_MCI_MCIDIS		(1 <<  1)	/* Multi-Media Interface Disable */
-#define		AT91_MCI_PWSEN		(1 <<  2)	/* Power Save Mode Enable */
-#define		AT91_MCI_PWSDIS		(1 <<  3)	/* Power Save Mode Disable */
-#define		AT91_MCI_SWRST		(1 <<  7)	/* Software Reset */
-
-#define AT91_MCI_MR		0x04		/* Mode Register */
-#define		AT91_MCI_CLKDIV		(0xff  <<  0)	/* Clock Divider */
-#define		AT91_MCI_PWSDIV		(7     <<  8)	/* Power Saving Divider */
-#define		AT91_MCI_PDCPADV	(1     << 14)	/* PDC Padding Value */
-#define		AT91_MCI_PDCMODE	(1     << 15)	/* PDC-orientated Mode */
-#define		AT91_MCI_BLKLEN		(0xfff << 18)	/* Data Block Length */
-
-#define AT91_MCI_DTOR		0x08		/* Data Timeout Register */
-#define		AT91_MCI_DTOCYC		(0xf << 0)	/* Data Timeout Cycle Number */
-#define		AT91_MCI_DTOMUL		(7   << 4)	/* Data Timeout Multiplier */
-#define		AT91_MCI_DTOMUL_1		(0 <<  4)
-#define		AT91_MCI_DTOMUL_16		(1 <<  4)
-#define		AT91_MCI_DTOMUL_128		(2 <<  4)
-#define		AT91_MCI_DTOMUL_256		(3 <<  4)
-#define		AT91_MCI_DTOMUL_1K		(4 <<  4)
-#define		AT91_MCI_DTOMUL_4K		(5 <<  4)
-#define		AT91_MCI_DTOMUL_64K		(6 <<  4)
-#define		AT91_MCI_DTOMUL_1M		(7 <<  4)
-
-#define AT91_MCI_SDCR		0x0c		/* SD Card Register */
-#define		AT91_MCI_SDCSEL		(3 << 0)	/* SD Card Selector */
-#define		AT91_MCI_SDCBUS		(1 << 7)	/* 1-bit or 4-bit bus */
-
-#define AT91_MCI_ARGR		0x10		/* Argument Register */
-
-#define AT91_MCI_CMDR		0x14		/* Command Register */
-#define		AT91_MCI_CMDNB		(0x3f << 0)	/* Command Number */
-#define		AT91_MCI_RSPTYP		(3    << 6)	/* Response Type */
-#define			AT91_MCI_RSPTYP_NONE	(0 <<  6)
-#define			AT91_MCI_RSPTYP_48	(1 <<  6)
-#define			AT91_MCI_RSPTYP_136	(2 <<  6)
-#define		AT91_MCI_SPCMD		(7    << 8)	/* Special Command */
-#define			AT91_MCI_SPCMD_NONE	(0 <<  8)
-#define			AT91_MCI_SPCMD_INIT	(1 <<  8)
-#define			AT91_MCI_SPCMD_SYNC	(2 <<  8)
-#define			AT91_MCI_SPCMD_ICMD	(4 <<  8)
-#define			AT91_MCI_SPCMD_IRESP	(5 <<  8)
-#define		AT91_MCI_OPDCMD		(1 << 11)	/* Open Drain Command */
-#define		AT91_MCI_MAXLAT		(1 << 12)	/* Max Latency for Command to Response */
-#define		AT91_MCI_TRCMD		(3 << 16)	/* Transfer Command */
-#define			AT91_MCI_TRCMD_NONE	(0 << 16)
-#define			AT91_MCI_TRCMD_START	(1 << 16)
-#define			AT91_MCI_TRCMD_STOP	(2 << 16)
-#define		AT91_MCI_TRDIR		(1 << 18)	/* Transfer Direction */
-#define		AT91_MCI_TRTYP		(3 << 19)	/* Transfer Type */
-#define			AT91_MCI_TRTYP_BLOCK	(0 << 19)
-#define			AT91_MCI_TRTYP_MULTIPLE	(1 << 19)
-#define			AT91_MCI_TRTYP_STREAM	(2 << 19)
-
-#define AT91_MCI_RSPR(n)	(0x20 + ((n) * 4))	/* Response Registers 0-3 */
-#define AT91_MCR_RDR		0x30		/* Receive Data Register */
-#define AT91_MCR_TDR		0x34		/* Transmit Data Register */
-
-#define AT91_MCI_SR		0x40		/* Status Register */
-#define		AT91_MCI_CMDRDY		(1 <<  0)	/* Command Ready */
-#define		AT91_MCI_RXRDY		(1 <<  1)	/* Receiver Ready */
-#define		AT91_MCI_TXRDY		(1 <<  2)	/* Transmit Ready */
-#define		AT91_MCI_BLKE		(1 <<  3)	/* Data Block Ended */
-#define		AT91_MCI_DTIP		(1 <<  4)	/* Data Transfer in Progress */
-#define		AT91_MCI_NOTBUSY	(1 <<  5)	/* Data Not Busy */
-#define		AT91_MCI_ENDRX		(1 <<  6)	/* End of RX Buffer */
-#define		AT91_MCI_ENDTX		(1 <<  7)	/* End fo TX Buffer */
-#define		AT91_MCI_SDIOIRQA	(1 <<  8)	/* SDIO Interrupt for Slot A */
-#define		At91_MCI_SDIOIRQB	(1 <<  9)	/* SDIO Interrupt for Slot B [AT91RM9200 only] */
-#define		AT91_MCI_RXBUFF		(1 << 14)	/* RX Buffer Full */
-#define		AT91_MCI_TXBUFE		(1 << 15)	/* TX Buffer Empty */
-#define		AT91_MCI_RINDE		(1 << 16)	/* Response Index Error */
-#define		AT91_MCI_RDIRE		(1 << 17)	/* Response Direction Error */
-#define		AT91_MCI_RCRCE		(1 << 18)	/* Response CRC Error */
-#define		AT91_MCI_RENDE		(1 << 19)	/* Response End Bit Error */
-#define		AT91_MCI_RTOE		(1 << 20)	/* Reponse Time-out Error */
-#define		AT91_MCI_DCRCE		(1 << 21)	/* Data CRC Error */
-#define		AT91_MCI_DTOE		(1 << 22)	/* Data Time-out Error */
-#define		AT91_MCI_OVRE		(1 << 30)	/* Overrun */
-#define		AT91_MCI_UNRE		(1 << 31)	/* Underrun */
-
-#define AT91_MCI_IER		0x44		/* Interrupt Enable Register */
-#define AT91_MCI_IDR		0x48		/* Interrupt Disable Register */
-#define AT91_MCI_IMR		0x4c		/* Interrupt Mask Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_pdc.h b/include/asm-arm/arch-at91rm9200/at91_pdc.h
deleted file mode 100644
index 79d6e02..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_pdc.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_pdc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Peripheral Data Controller (PDC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PDC_H
-#define AT91_PDC_H
-
-#define AT91_PDC_RPR		0x100	/* Receive Pointer Register */
-#define AT91_PDC_RCR		0x104	/* Receive Counter Register */
-#define AT91_PDC_TPR		0x108	/* Transmit Pointer Register */
-#define AT91_PDC_TCR		0x10c	/* Transmit Counter Register */
-#define AT91_PDC_RNPR		0x110	/* Receive Next Pointer Register */
-#define AT91_PDC_RNCR		0x114	/* Receive Next Counter Register */
-#define AT91_PDC_TNPR		0x118	/* Transmit Next Pointer Register */
-#define AT91_PDC_TNCR		0x11c	/* Transmit Next Counter Register */
-
-#define AT91_PDC_PTCR		0x120	/* Transfer Control Register */
-#define		AT91_PDC_RXTEN		(1 << 0)	/* Receiver Transfer Enable */
-#define		AT91_PDC_RXTDIS		(1 << 1)	/* Receiver Transfer Disable */
-#define		AT91_PDC_TXTEN		(1 << 8)	/* Transmitter Transfer Enable */
-#define		AT91_PDC_TXTDIS		(1 << 9)	/* Transmitter Transfer Disable */
-
-#define AT91_PDC_PTSR		0x124	/* Transfer Status Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_pio.h b/include/asm-arm/arch-at91rm9200/at91_pio.h
deleted file mode 100644
index 680eaa1..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_pio.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_pio.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Parallel I/O Controller (PIO) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PIO_H
-#define AT91_PIO_H
-
-#define PIO_PER		0x00	/* Enable Register */
-#define PIO_PDR		0x04	/* Disable Register */
-#define PIO_PSR		0x08	/* Status Register */
-#define PIO_OER		0x10	/* Output Enable Register */
-#define PIO_ODR		0x14	/* Output Disable Register */
-#define PIO_OSR		0x18	/* Output Status Register */
-#define PIO_IFER	0x20	/* Glitch Input Filter Enable */
-#define PIO_IFDR	0x24	/* Glitch Input Filter Disable */
-#define PIO_IFSR	0x28	/* Glitch Input Filter Status */
-#define PIO_SODR	0x30	/* Set Output Data Register */
-#define PIO_CODR	0x34	/* Clear Output Data Register */
-#define PIO_ODSR	0x38	/* Output Data Status Register */
-#define PIO_PDSR	0x3c	/* Pin Data Status Register */
-#define PIO_IER		0x40	/* Interrupt Enable Register */
-#define PIO_IDR		0x44	/* Interrupt Disable Register */
-#define PIO_IMR		0x48	/* Interrupt Mask Register */
-#define PIO_ISR		0x4c	/* Interrupt Status Register */
-#define PIO_MDER	0x50	/* Multi-driver Enable Register */
-#define PIO_MDDR	0x54	/* Multi-driver Disable Register */
-#define PIO_MDSR	0x58	/* Multi-driver Status Register */
-#define PIO_PUDR	0x60	/* Pull-up Disable Register */
-#define PIO_PUER	0x64	/* Pull-up Enable Register */
-#define PIO_PUSR	0x68	/* Pull-up Status Register */
-#define PIO_ASR		0x70	/* Peripheral A Select Register */
-#define PIO_BSR		0x74	/* Peripheral B Select Register */
-#define PIO_ABSR	0x78	/* AB Status Register */
-#define PIO_OWER	0xa0	/* Output Write Enable Register */
-#define PIO_OWDR	0xa4	/* Output Write Disable Register */
-#define PIO_OWSR	0xa8	/* Output Write Status Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_pit.h b/include/asm-arm/arch-at91rm9200/at91_pit.h
deleted file mode 100644
index 4a30d009..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_pit.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_pit.h
- *
- * Periodic Interval Timer (PIT) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PIT_H
-#define AT91_PIT_H
-
-#define AT91_PIT_MR		(AT91_PIT + 0x00)	/* Mode Register */
-#define		AT91_PIT_PITIEN		(1 << 25)		/* Timer Interrupt Enable */
-#define		AT91_PIT_PITEN		(1 << 24)		/* Timer Enabled */
-#define		AT91_PIT_PIV		(0xfffff)		/* Periodic Interval Value */
-
-#define AT91_PIT_SR		(AT91_PIT + 0x04)	/* Status Register */
-#define		AT91_PIT_PITS		(1 << 0)		/* Timer Status */
-
-#define AT91_PIT_PIVR		(AT91_PIT + 0x08)	/* Periodic Interval Value Register */
-#define AT91_PIT_PIIR		(AT91_PIT + 0x0c)	/* Periodic Interval Image Register */
-#define		AT91_PIT_PICNT		(0xfff << 20)		/* Interval Counter */
-#define		AT91_PIT_CPIV		(0xfffff)		/* Inverval Value */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_pmc.h b/include/asm-arm/arch-at91rm9200/at91_pmc.h
deleted file mode 100644
index c3b489d..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_pmc.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_pmc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Power Management Controller (PMC) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PMC_H
-#define AT91_PMC_H
-
-#define	AT91_PMC_SCER		(AT91_PMC + 0x00)	/* System Clock Enable Register */
-#define	AT91_PMC_SCDR		(AT91_PMC + 0x04)	/* System Clock Disable Register */
-
-#define	AT91_PMC_SCSR		(AT91_PMC + 0x08)	/* System Clock Status Register */
-#define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
-#define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
-#define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
-#define		AT91RM9200_PMC_UHP	(1 <<  4)		/* USB Host Port Clock [AT91RM9200 only] */
-#define		AT91SAM926x_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91SAM926x only] */
-#define		AT91SAM926x_PMC_UDP	(1 <<  7)		/* USB Devcice Port Clock [AT91SAM926x only] */
-#define		AT91_PMC_PCK0		(1 <<  8)		/* Programmable Clock 0 */
-#define		AT91_PMC_PCK1		(1 <<  9)		/* Programmable Clock 1 */
-#define		AT91_PMC_PCK2		(1 << 10)		/* Programmable Clock 2 */
-#define		AT91_PMC_PCK3		(1 << 11)		/* Programmable Clock 3 */
-#define		AT91_PMC_HCK0		(1 << 16)		/* AHB Clock (USB host) [AT91SAM9261 only] */
-#define		AT91_PMC_HCK1		(1 << 17)		/* AHB Clock (LCD) [AT91SAM9261 only] */
-
-#define	AT91_PMC_PCER		(AT91_PMC + 0x10)	/* Peripheral Clock Enable Register */
-#define	AT91_PMC_PCDR		(AT91_PMC + 0x14)	/* Peripheral Clock Disable Register */
-#define	AT91_PMC_PCSR		(AT91_PMC + 0x18)	/* Peripheral Clock Status Register */
-
-#define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register */
-#define		AT91_PMC_MOSCEN		(1    << 0)		/* Main Oscillator Enable */
-#define		AT91_PMC_OSCBYPASS	(1    << 1)		/* Oscillator Bypass [AT91SAM926x only] */
-#define		AT91_PMC_OSCOUNT	(0xff << 8)		/* Main Oscillator Start-up Time */
-
-#define	AT91_CKGR_MCFR		(AT91_PMC + 0x24)	/* Main Clock Frequency Register */
-#define		AT91_PMC_MAINF		(0xffff <<  0)		/* Main Clock Frequency */
-#define		AT91_PMC_MAINRDY	(1	<< 16)		/* Main Clock Ready */
-
-#define	AT91_CKGR_PLLAR		(AT91_PMC + 0x28)	/* PLL A Register */
-#define	AT91_CKGR_PLLBR		(AT91_PMC + 0x2c)	/* PLL B Register */
-#define		AT91_PMC_DIV		(0xff  <<  0)		/* Divider */
-#define		AT91_PMC_PLLCOUNT	(0x3f  <<  8)		/* PLL Counter */
-#define		AT91_PMC_OUT		(3     << 14)		/* PLL Clock Frequency Range */
-#define		AT91_PMC_MUL		(0x7ff << 16)		/* PLL Multiplier */
-#define		AT91_PMC_USB96M		(1     << 28)		/* Divider by 2 Enable (PLLB only) */
-
-#define	AT91_PMC_MCKR		(AT91_PMC + 0x30)	/* Master Clock Register */
-#define		AT91_PMC_CSS		(3 <<  0)		/* Master Clock Selection */
-#define			AT91_PMC_CSS_SLOW		(0 << 0)
-#define			AT91_PMC_CSS_MAIN		(1 << 0)
-#define			AT91_PMC_CSS_PLLA		(2 << 0)
-#define			AT91_PMC_CSS_PLLB		(3 << 0)
-#define		AT91_PMC_PRES		(7 <<  2)		/* Master Clock Prescaler */
-#define			AT91_PMC_PRES_1			(0 << 2)
-#define			AT91_PMC_PRES_2			(1 << 2)
-#define			AT91_PMC_PRES_4			(2 << 2)
-#define			AT91_PMC_PRES_8			(3 << 2)
-#define			AT91_PMC_PRES_16		(4 << 2)
-#define			AT91_PMC_PRES_32		(5 << 2)
-#define			AT91_PMC_PRES_64		(6 << 2)
-#define		AT91_PMC_MDIV		(3 <<  8)		/* Master Clock Division */
-#define			AT91_PMC_MDIV_1			(0 << 8)
-#define			AT91_PMC_MDIV_2			(1 << 8)
-#define			AT91_PMC_MDIV_3			(2 << 8)
-#define			AT91_PMC_MDIV_4			(3 << 8)
-
-#define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-3 Registers */
-
-#define	AT91_PMC_IER		(AT91_PMC + 0x60)	/* Interrupt Enable Register */
-#define	AT91_PMC_IDR		(AT91_PMC + 0x64)	/* Interrupt Disable Register */
-#define	AT91_PMC_SR		(AT91_PMC + 0x68)	/* Status Register */
-#define		AT91_PMC_MOSCS		(1 <<  0)		/* MOSCS Flag */
-#define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
-#define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
-#define		AT91_PMC_MCKRDY		(1 <<  3)		/* Master Clock */
-#define		AT91_PMC_PCK0RDY	(1 <<  8)		/* Programmable Clock 0 */
-#define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
-#define		AT91_PMC_PCK2RDY	(1 << 10)		/* Programmable Clock 2 */
-#define		AT91_PMC_PCK3RDY	(1 << 11)		/* Programmable Clock 3 */
-#define	AT91_PMC_IMR		(AT91_PMC + 0x6c)	/* Interrupt Mask Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_rstc.h b/include/asm-arm/arch-at91rm9200/at91_rstc.h
deleted file mode 100644
index 237d3c4..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_rstc.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_rstc.h
- *
- * Reset Controller (RSTC) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_RSTC_H
-#define AT91_RSTC_H
-
-#define AT91_RSTC_CR		(AT91_RSTC + 0x00)	/* Reset Controller Control Register */
-#define		AT91_RSTC_PROCRST	(1 << 0)		/* Processor Reset */
-#define		AT91_RSTC_PERRST	(1 << 2)		/* Peripheral Reset */
-#define		AT91_RSTC_EXTRST	(1 << 3)		/* External Reset */
-#define		AT91_RSTC_KEY		(0xff << 24)		/* KEY Password */
-
-#define AT91_RSTC_SR		(AT91_RSTC + 0x04)	/* Reset Controller Status Register */
-#define		AT91_RSTC_URSTS		(1 << 0)		/* User Reset Status */
-#define		AT91_RSTC_RSTTYP	(7 << 8)		/* Reset Type */
-#define			AT91_RSTC_RSTTYP_GENERAL	(0 << 8)
-#define			AT91_RSTC_RSTTYP_WAKEUP		(1 << 8)
-#define			AT91_RSTC_RSTTYP_WATCHDOG	(2 << 8)
-#define			AT91_RSTC_RSTTYP_SOFTWARE	(3 << 8)
-#define			AT91_RSTC_RSTTYP_USER	(4 << 8)
-#define		AT91_RSTC_NRSTL		(1 << 16)		/* NRST Pin Level */
-#define		AT91_RSTC_SRCMP		(1 << 17)		/* Software Reset Command in Progress */
-
-#define AT91_RSTC_MR		(AT91_RSTC + 0x08)	/* Reset Controller Mode Register */
-#define		AT91_RSTC_URSTEN	(1 << 0)		/* User Reset Enable */
-#define		AT91_RSTC_URSTIEN	(1 << 4)		/* User Reset Interrupt Enable */
-#define		AT91_RSTC_ERSTL		(0xf << 8)		/* External Reset Length */
-#define		AT91_RSTC_KEY		(0xff << 24)		/* KEY Password */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_rtc.h b/include/asm-arm/arch-at91rm9200/at91_rtc.h
deleted file mode 100644
index 095fe08..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_rtc.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_rtc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Real Time Clock (RTC) - System peripheral registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_RTC_H
-#define AT91_RTC_H
-
-#define	AT91_RTC_CR		(AT91_RTC + 0x00)	/* Control Register */
-#define		AT91_RTC_UPDTIM		(1 <<  0)		/* Update Request Time Register */
-#define		AT91_RTC_UPDCAL		(1 <<  1)		/* Update Request Calendar Register */
-#define		AT91_RTC_TIMEVSEL	(3 <<  8)		/* Time Event Selection */
-#define			AT91_RTC_TIMEVSEL_MINUTE	(0 << 8)
-#define			AT91_RTC_TIMEVSEL_HOUR		(1 << 8)
-#define			AT91_RTC_TIMEVSEL_DAY24		(2 << 8)
-#define			AT91_RTC_TIMEVSEL_DAY12		(3 << 8)
-#define		AT91_RTC_CALEVSEL	(3 << 16)		/* Calendar Event Selection */
-#define			AT91_RTC_CALEVSEL_WEEK		(0 << 16)
-#define			AT91_RTC_CALEVSEL_MONTH		(1 << 16)
-#define			AT91_RTC_CALEVSEL_YEAR		(2 << 16)
-
-#define	AT91_RTC_MR		(AT91_RTC + 0x04)	/* Mode Register */
-#define			AT91_RTC_HRMOD		(1 <<  0)		/* 12/24 Hour Mode */
-
-#define	AT91_RTC_TIMR		(AT91_RTC + 0x08)	/* Time Register */
-#define		AT91_RTC_SEC		(0x7f <<  0)		/* Current Second */
-#define		AT91_RTC_MIN		(0x7f <<  8)		/* Current Minute */
-#define		AT91_RTC_HOUR		(0x3f << 16)		/* Current Hour */
-#define		AT91_RTC_AMPM		(1    << 22)		/* Ante Meridiem Post Meridiem Indicator */
-
-#define	AT91_RTC_CALR		(AT91_RTC + 0x0c)	/* Calendar Register */
-#define		AT91_RTC_CENT		(0x7f <<  0)		/* Current Century */
-#define		AT91_RTC_YEAR		(0xff <<  8)		/* Current Year */
-#define		AT91_RTC_MONTH		(0x1f << 16)		/* Current Month */
-#define		AT91_RTC_DAY		(7    << 21)		/* Current Day */
-#define		AT91_RTC_DATE		(0x3f << 24)		/* Current Date */
-
-#define	AT91_RTC_TIMALR		(AT91_RTC + 0x10)	/* Time Alarm Register */
-#define		AT91_RTC_SECEN		(1 <<  7)		/* Second Alarm Enable */
-#define		AT91_RTC_MINEN		(1 << 15)		/* Minute Alarm Enable */
-#define		AT91_RTC_HOUREN		(1 << 23)		/* Hour Alarm Enable */
-
-#define	AT91_RTC_CALALR		(AT91_RTC + 0x14)	/* Calendar Alarm Register */
-#define		AT91_RTC_MTHEN		(1 << 23)		/* Month Alarm Enable */
-#define		AT91_RTC_DATEEN		(1 << 31)		/* Date Alarm Enable */
-
-#define	AT91_RTC_SR		(AT91_RTC + 0x18)	/* Status Register */
-#define		AT91_RTC_ACKUPD		(1 <<  0)		/* Acknowledge for Update */
-#define		AT91_RTC_ALARM		(1 <<  1)		/* Alarm Flag */
-#define		AT91_RTC_SECEV		(1 <<  2)		/* Second Event */
-#define		AT91_RTC_TIMEV		(1 <<  3)		/* Time Event */
-#define		AT91_RTC_CALEV		(1 <<  4)		/* Calendar Event */
-
-#define	AT91_RTC_SCCR		(AT91_RTC + 0x1c)	/* Status Clear Command Register */
-#define	AT91_RTC_IER		(AT91_RTC + 0x20)	/* Interrupt Enable Register */
-#define	AT91_RTC_IDR		(AT91_RTC + 0x24)	/* Interrupt Disable Register */
-#define	AT91_RTC_IMR		(AT91_RTC + 0x28)	/* Interrupt Mask Register */
-
-#define	AT91_RTC_VER		(AT91_RTC + 0x2c)	/* Valid Entry Register */
-#define		AT91_RTC_NVTIM		(1 <<  0)		/* Non valid Time */
-#define		AT91_RTC_NVCAL		(1 <<  1)		/* Non valid Calendar */
-#define		AT91_RTC_NVTIMALR	(1 <<  2)		/* Non valid Time Alarm */
-#define		AT91_RTC_NVCALALR	(1 <<  3)		/* Non valid Calendar Alarm */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_rtt.h b/include/asm-arm/arch-at91rm9200/at91_rtt.h
deleted file mode 100644
index c6751ba..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_rtt.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_rtt.h
- *
- * Real-time Timer (RTT) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_RTT_H
-#define AT91_RTT_H
-
-#define AT91_RTT_MR		(AT91_RTT + 0x00)	/* Real-time Mode Register */
-#define		AT91_RTT_RTPRES		(0xffff << 0)		/* Real-time Timer Prescaler Value */
-#define		AT91_RTT_ALMIEN		(1 << 16)		/* Alarm Interrupt Enable */
-#define		AT91_RTT_RTTINCIEN	(1 << 17)		/* Real Time Timer Increment Interrupt Enable */
-#define		AT91_RTT_RTTRST		(1 << 18)		/* Real Time Timer Restart */
-
-#define AT91_RTT_AR		(AT91_RTT + 0x04)	/* Real-time Alarm Register */
-#define		AT91_RTT_ALMV		(0xffffffff)		/* Alarm Value */
-
-#define AT91_RTT_VR		(AT91_RTT + 0x08)	/* Real-time Value Register */
-#define		AT91_RTT_CRTV		(0xffffffff)		/* Current Real-time Value */
-
-#define AT91_RTT_SR		(AT91_RTT + 0x0c)	/* Real-time Status Register */
-#define		AT91_RTT_ALMS		(1 << 0)		/* Real-time Alarm Status */
-#define		AT91_RTT_RTTINC		(1 << 1)		/* Real-time Timer Increment */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_shdwc.h b/include/asm-arm/arch-at91rm9200/at91_shdwc.h
deleted file mode 100644
index 0439250..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_shdwc.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_shdwc.h
- *
- * Shutdown Controller (SHDWC) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_SHDWC_H
-#define AT91_SHDWC_H
-
-#define AT91_SHDW_CR		(AT91_SHDWC + 0x00)	/* Shut Down Control Register */
-#define		AT91_SHDW_SHDW		(1    << 0)		/* Processor Reset */
-#define		AT91_SHDW_KEY		(0xff << 24)		/* KEY Password */
-
-#define AT91_SHDW_MR		(AT91_SHDWC + 0x04)	/* Shut Down Mode Register */
-#define		AT91_SHDW_WKMODE0	(3 << 0)		/* Wake-up 0 Mode Selection */
-#define			AT91_SHDW_WKMODE0_NONE		0
-#define			AT91_SHDW_WKMODE0_HIGH		1
-#define			AT91_SHDW_WKMODE0_LOW		2
-#define			AT91_SHDW_WKMODE0_ANYLEVEL	3
-#define		AT91_SHDW_CPTWK0	(0xf << 4)		/* Counter On Wake Up 0 */
-#define		AT91_SHDW_RTTWKEN	(1   << 16)		/* Real Time Timer Wake-up Enable */
-
-#define AT91_SHDW_SR		(AT91_SHDWC + 0x08)	/* Shut Down Status Register */
-#define		AT91_SHDW_WAKEUP0	(1 <<  0)		/* Wake-up 0 Status */
-#define		AT91_SHDW_RTTWK		(1 << 16)		/* Real-time Timer Wake-up */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_spi.h b/include/asm-arm/arch-at91rm9200/at91_spi.h
deleted file mode 100644
index bec48ca..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_spi.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_spi.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Serial Peripheral Interface (SPI) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_SPI_H
-#define AT91_SPI_H
-
-#define AT91_SPI_CR			0x00		/* Control Register */
-#define		AT91_SPI_SPIEN		(1 <<  0)		/* SPI Enable */
-#define		AT91_SPI_SPIDIS		(1 <<  1)		/* SPI Disable */
-#define		AT91_SPI_SWRST		(1 <<  7)		/* SPI Software Reset */
-#define		AT91_SPI_LASTXFER	(1 << 24)		/* Last Transfer [SAM9261 only] */
-
-#define AT91_SPI_MR			0x04		/* Mode Register */
-#define		AT91_SPI_MSTR		(1    <<  0)		/* Master/Slave Mode */
-#define		AT91_SPI_PS		(1    <<  1)		/* Peripheral Select */
-#define			AT91_SPI_PS_FIXED	(0 << 1)
-#define			AT91_SPI_PS_VARIABLE	(1 << 1)
-#define		AT91_SPI_PCSDEC		(1    <<  2)		/* Chip Select Decode */
-#define		AT91_SPI_DIV32		(1    <<  3)		/* Clock Selection [AT91RM9200 only] */
-#define		AT91_SPI_MODFDIS	(1    <<  4)		/* Mode Fault Detection */
-#define		AT91_SPI_LLB		(1    <<  7)		/* Local Loopback Enable */
-#define		AT91_SPI_PCS		(0xf  << 16)		/* Peripheral Chip Select */
-#define		AT91_SPI_DLYBCS		(0xff << 24)		/* Delay Between Chip Selects */
-
-#define AT91_SPI_RDR		0x08			/* Receive Data Register */
-#define		AT91_SPI_RD		(0xffff <<  0)		/* Receive Data */
-#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
-
-#define AT91_SPI_TDR		0x0c			/* Transmit Data Register */
-#define		AT91_SPI_TD		(0xffff <<  0)		/* Transmit Data */
-#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
-#define		AT91_SPI_LASTXFER	(1	<< 24)		/* Last Transfer [SAM9261 only] */
-
-#define AT91_SPI_SR		0x10			/* Status Register */
-#define		AT91_SPI_RDRF		(1 <<  0)		/* Receive Data Register Full */
-#define		AT91_SPI_TDRE		(1 <<  1)		/* Transmit Data Register Full */
-#define		AT91_SPI_MODF		(1 <<  2)		/* Mode Fault Error */
-#define		AT91_SPI_OVRES		(1 <<  3)		/* Overrun Error Status */
-#define		AT91_SPI_ENDRX		(1 <<  4)		/* End of RX buffer */
-#define		AT91_SPI_ENDTX		(1 <<  5)		/* End of TX buffer */
-#define		AT91_SPI_RXBUFF		(1 <<  6)		/* RX Buffer Full */
-#define		AT91_SPI_TXBUFE		(1 <<  7)		/* TX Buffer Empty */
-#define		AT91_SPI_NSSR		(1 <<  8)		/* NSS Rising [SAM9261 only] */
-#define		AT91_SPI_TXEMPTY	(1 <<  9)		/* Transmission Register Empty [SAM9261 only] */
-#define		AT91_SPI_SPIENS		(1 << 16)		/* SPI Enable Status */
-
-#define AT91_SPI_IER		0x14			/* Interrupt Enable Register */
-#define AT91_SPI_IDR		0x18			/* Interrupt Disable Register */
-#define AT91_SPI_IMR		0x1c			/* Interrupt Mask Register */
-
-#define AT91_SPI_CSR(n)		(0x30 + ((n) * 4))	/* Chip Select Registers 0-3 */
-#define		AT91_SPI_CPOL		(1    <<  0)		/* Clock Polarity */
-#define		AT91_SPI_NCPHA		(1    <<  1)		/* Clock Phase */
-#define		AT91_SPI_CSAAT		(1    <<  3)		/* Chip Select Active After Transfer [SAM9261 only] */
-#define		AT91_SPI_BITS		(0xf  <<  4)		/* Bits Per Transfer */
-#define			AT91_SPI_BITS_8		(0 << 4)
-#define			AT91_SPI_BITS_9		(1 << 4)
-#define			AT91_SPI_BITS_10	(2 << 4)
-#define			AT91_SPI_BITS_11	(3 << 4)
-#define			AT91_SPI_BITS_12	(4 << 4)
-#define			AT91_SPI_BITS_13	(5 << 4)
-#define			AT91_SPI_BITS_14	(6 << 4)
-#define			AT91_SPI_BITS_15	(7 << 4)
-#define			AT91_SPI_BITS_16	(8 << 4)
-#define		AT91_SPI_SCBR		(0xff <<  8)		/* Serial Clock Baud Rate */
-#define		AT91_SPI_DLYBS		(0xff << 16)		/* Delay before SPCK */
-#define		AT91_SPI_DLYBCT		(0xff << 24)		/* Delay between Consecutive Transfers */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_ssc.h b/include/asm-arm/arch-at91rm9200/at91_ssc.h
deleted file mode 100644
index 694bcaa..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_ssc.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_ssc.h
- *
- * Copyright (C) SAN People
- *
- * Serial Synchronous Controller (SSC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_SSC_H
-#define AT91_SSC_H
-
-#define AT91_SSC_CR		0x00	/* Control Register */
-#define		AT91_SSC_RXEN		(1 <<  0)	/* Receive Enable */
-#define		AT91_SSC_RXDIS		(1 <<  1)	/* Receive Disable */
-#define		AT91_SSC_TXEN		(1 <<  8)	/* Transmit Enable */
-#define		AT91_SSC_TXDIS		(1 <<  9)	/* Transmit Disable */
-#define		AT91_SSC_SWRST		(1 << 15)	/* Software Reset */
-
-#define AT91_SSC_CMR		0x04	/* Clock Mode Register */
-#define		AT91_SSC_CMR_DIV	(0xfff << 0)	/* Clock Divider */
-
-#define AT91_SSC_RCMR		0x10	/* Receive Clock Mode Register */
-#define		AT91_SSC_CKS		(3    <<  0)	/* Clock Selection */
-#define			AT91_SSC_CKS_DIV		(0 << 0)
-#define			AT91_SSC_CKS_CLOCK		(1 << 0)
-#define			AT91_SSC_CKS_PIN		(2 << 0)
-#define		AT91_SSC_CKO		(7    <<  2)	/* Clock Output Mode Selection */
-#define			AT91_SSC_CKO_NONE		(0 << 2)
-#define			AT91_SSC_CKO_CONTINUOUS		(1 << 2)
-#define		AT91_SSC_CKI		(1    <<  5)	/* Clock Inversion */
-#define			AT91_SSC_CKI_FALLING		(0 << 5)
-#define			AT91_SSC_CK_RISING		(1 << 5)
-#define		AT91_SSC_CKG		(1    <<  6)	/* Receive Clock Gating Selection [AT91SAM9261 only] */
-#define			AT91_SSC_CKG_NONE		(0 << 6)
-#define			AT91_SSC_CKG_RFLOW		(1 << 6)
-#define			AT91_SSC_CKG_RFHIGH		(2 << 6)
-#define		AT91_SSC_START		(0xf  <<  8)	/* Start Selection */
-#define			AT91_SSC_START_CONTINUOUS	(0 << 8)
-#define			AT91_SSC_START_TX_RX		(1 << 8)
-#define			AT91_SSC_START_LOW_RF		(2 << 8)
-#define			AT91_SSC_START_HIGH_RF		(3 << 8)
-#define			AT91_SSC_START_FALLING_RF	(4 << 8)
-#define			AT91_SSC_START_RISING_RF	(5 << 8)
-#define			AT91_SSC_START_LEVEL_RF		(6 << 8)
-#define			AT91_SSC_START_EDGE_RF		(7 << 8)
-#define		AT91_SSC_STOP		(1    << 12)	/* Receive Stop Selection [AT91SAM9261 only] */
-#define		AT91_SSC_STTDLY		(0xff << 16)	/* Start Delay */
-#define		AT91_SSC_PERIOD		(0xff << 24)	/* Period Divider Selection */
-
-#define AT91_SSC_RFMR		0x14	/* Receive Frame Mode Register */
-#define		AT91_SSC_DATALEN	(0x1f <<  0)	/* Data Length */
-#define		AT91_SSC_LOOP		(1    <<  5)	/* Loop Mode */
-#define		AT91_SSC_MSBF		(1    <<  7)	/* Most Significant Bit First */
-#define		AT91_SSC_DATNB		(0xf  <<  8)	/* Data Number per Frame */
-#define		AT91_SSC_FSLEN		(0xf  << 16)	/* Frame Sync Length */
-#define		AT91_SSC_FSOS		(7    << 20)	/* Frame Sync Output Selection */
-#define			AT91_SSC_FSOS_NONE		(0 << 20)
-#define			AT91_SSC_FSOS_NEGATIVE		(1 << 20)
-#define			AT91_SSC_FSOS_POSITIVE		(2 << 20)
-#define			AT91_SSC_FSOS_LOW		(3 << 20)
-#define			AT91_SSC_FSOS_HIGH		(4 << 20)
-#define			AT91_SSC_FSOS_TOGGLE		(5 << 20)
-#define		AT91_SSC_FSEDGE		(1    << 24)	/* Frame Sync Edge Detection */
-#define			AT91_SSC_FSEDGE_POSITIVE	(0 << 24)
-#define			AT91_SSC_FSEDGE_NEGATIVE	(1 << 24)
-
-#define AT91_SSC_TCMR		0x18	/* Transmit Clock Mode Register */
-#define AT91_SSC_TFMR		0x1c	/* Transmit Fram Mode Register */
-#define		AT91_SSC_DATDEF		(1 <<  5)	/* Data Default Value */
-#define		AT91_SSC_FSDEN		(1 << 23)	/* Frame Sync Data Enable */
-
-#define AT91_SSC_RHR		0x20	/* Receive Holding Register */
-#define AT91_SSC_THR		0x24	/* Transmit Holding Register */
-#define AT91_SSC_RSHR		0x30	/* Receive Sync Holding Register */
-#define AT91_SSC_TSHR		0x34	/* Transmit Sync Holding Register */
-
-#define AT91_SSC_RC0R		0x38	/* Receive Compare 0 Register [AT91SAM9261 only] */
-#define AT91_SSC_RC1R		0x3c	/* Receive Compare 1 Register [AT91SAM9261 only] */
-
-#define AT91_SSC_SR		0x40	/* Status Register */
-#define		AT91_SSC_TXRDY		(1 <<  0)	/* Transmit Ready */
-#define		AT91_SSC_TXEMPTY	(1 <<  1)	/* Transmit Empty */
-#define		AT91_SSC_ENDTX		(1 <<  2)	/* End of Transmission */
-#define		AT91_SSC_TXBUFE		(1 <<  3)	/* Transmit Buffer Empty */
-#define		AT91_SSC_RXRDY		(1 <<  4)	/* Receive Ready */
-#define		AT91_SSC_OVRUN		(1 <<  5)	/* Receive Overrun */
-#define		AT91_SSC_ENDRX		(1 <<  6)	/* End of Reception */
-#define		AT91_SSC_RXBUFF		(1 <<  7)	/* Receive Buffer Full */
-#define		AT91_SSC_CP0		(1 <<  8)	/* Compare 0 [AT91SAM9261 only] */
-#define		AT91_SSC_CP1		(1 <<  9)	/* Compare 1 [AT91SAM9261 only] */
-#define		AT91_SSC_TXSYN		(1 << 10)	/* Transmit Sync */
-#define		AT91_SSC_RXSYN		(1 << 11)	/* Receive Sync */
-#define		AT91_SSC_TXENA		(1 << 16)	/* Transmit Enable */
-#define		AT91_SSC_RXENA		(1 << 17)	/* Receive Enable */
-
-#define AT91_SSC_IER		0x44	/* Interrupt Enable Register */
-#define AT91_SSC_IDR		0x48	/* Interrupt Disable Register */
-#define AT91_SSC_IMR		0x4c	/* Interrupt Mask Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_st.h b/include/asm-arm/arch-at91rm9200/at91_st.h
deleted file mode 100644
index 2432ddf..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_st.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_st.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * System Timer (ST) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_ST_H
-#define AT91_ST_H
-
-#define	AT91_ST_CR		(AT91_ST + 0x00)	/* Control Register */
-#define 	AT91_ST_WDRST		(1 << 0)		/* Watchdog Timer Restart */
-
-#define	AT91_ST_PIMR		(AT91_ST + 0x04)	/* Period Interval Mode Register */
-#define		AT91_ST_PIV		(0xffff <<  0)		/* Period Interval Value */
-
-#define	AT91_ST_WDMR		(AT91_ST + 0x08)	/* Watchdog Mode Register */
-#define		AT91_ST_WDV		(0xffff <<  0)		/* Watchdog Counter Value */
-#define		AT91_ST_RSTEN		(1	<< 16)		/* Reset Enable */
-#define		AT91_ST_EXTEN		(1	<< 17)		/* External Signal Assertion Enable */
-
-#define	AT91_ST_RTMR		(AT91_ST + 0x0c)	/* Real-time Mode Register */
-#define		AT91_ST_RTPRES		(0xffff <<  0)		/* Real-time Prescalar Value */
-
-#define	AT91_ST_SR		(AT91_ST + 0x10)	/* Status Register */
-#define		AT91_ST_PITS		(1 << 0)		/* Period Interval Timer Status */
-#define		AT91_ST_WDOVF		(1 << 1) 		/* Watchdog Overflow */
-#define		AT91_ST_RTTINC		(1 << 2) 		/* Real-time Timer Increment */
-#define		AT91_ST_ALMS		(1 << 3) 		/* Alarm Status */
-
-#define	AT91_ST_IER		(AT91_ST + 0x14)	/* Interrupt Enable Register */
-#define	AT91_ST_IDR		(AT91_ST + 0x18)	/* Interrupt Disable Register */
-#define	AT91_ST_IMR		(AT91_ST + 0x1c)	/* Interrupt Mask Register */
-
-#define	AT91_ST_RTAR		(AT91_ST + 0x20)	/* Real-time Alarm Register */
-#define		AT91_ST_ALMV		(0xfffff << 0)		/* Alarm Value */
-
-#define	AT91_ST_CRTR		(AT91_ST + 0x24)	/* Current Real-time Register */
-#define		AT91_ST_CRTV		(0xfffff << 0)		/* Current Real-Time Value */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_tc.h b/include/asm-arm/arch-at91rm9200/at91_tc.h
deleted file mode 100644
index 8d06eb0..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_tc.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_tc.h
- *
- * Copyright (C) SAN People
- *
- * Timer/Counter Unit (TC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_TC_H
-#define AT91_TC_H
-
-#define AT91_TC_BCR		0xc0		/* TC Block Control Register */
-#define		AT91_TC_SYNC		(1 << 0)	/* Synchro Command */
-
-#define AT91_TC_BMR		0xc4		/* TC Block Mode Register */
-#define		AT91_TC_TC0XC0S		(3 << 0)	/* External Clock Signal 0 Selection */
-#define			AT91_TC_TC0XC0S_TCLK0		(0 << 0)
-#define			AT91_TC_TC0XC0S_NONE		(1 << 0)
-#define			AT91_TC_TC0XC0S_TIOA1		(2 << 0)
-#define			AT91_TC_TC0XC0S_TIOA2		(3 << 0)
-#define		AT91_TC_TC1XC1S		(3 << 2)	/* External Clock Signal 1 Selection */
-#define			AT91_TC_TC1XC1S_TCLK1		(0 << 2)
-#define			AT91_TC_TC1XC1S_NONE		(1 << 2)
-#define			AT91_TC_TC1XC1S_TIOA0		(2 << 2)
-#define			AT91_TC_TC1XC1S_TIOA2		(3 << 2)
-#define		AT91_TC_TC2XC2S		(3 << 4)	/* External Clock Signal 2 Selection */
-#define			AT91_TC_TC2XC2S_TCLK2		(0 << 4)
-#define			AT91_TC_TC2XC2S_NONE		(1 << 4)
-#define			AT91_TC_TC2XC2S_TIOA0		(2 << 4)
-#define			AT91_TC_TC2XC2S_TIOA1		(3 << 4)
-
-
-#define AT91_TC_CCR		0x00		/* Channel Control Register */
-#define		AT91_TC_CLKEN		(1 << 0)	/* Counter Clock Enable Command */
-#define		AT91_TC_CLKDIS		(1 << 1)	/* Counter CLock Disable Command */
-#define		AT91_TC_SWTRG		(1 << 2)	/* Software Trigger Command */
-
-#define AT91_TC_CMR		0x04		/* Channel Mode Register */
-#define		AT91_TC_TCCLKS		(7 << 0)	/* Capture/Waveform Mode: Clock Selection */
-#define			AT91_TC_TIMER_CLOCK1		(0 << 0)
-#define			AT91_TC_TIMER_CLOCK2		(1 << 0)
-#define			AT91_TC_TIMER_CLOCK3		(2 << 0)
-#define			AT91_TC_TIMER_CLOCK4		(3 << 0)
-#define			AT91_TC_TIMER_CLOCK5		(4 << 0)
-#define			AT91_TC_XC0			(5 << 0)
-#define			AT91_TC_XC1			(6 << 0)
-#define			AT91_TC_XC2			(7 << 0)
-#define		AT91_TC_CLKI		(1 << 3)	/* Capture/Waveform Mode: Clock Invert */
-#define		AT91_TC_BURST		(3 << 4)	/* Capture/Waveform Mode: Burst Signal Selection */
-#define		AT91_TC_LDBSTOP		(1 << 6)	/* Capture Mode: Counter Clock Stopped with TB Loading */
-#define		AT91_TC_LDBDIS		(1 << 7)	/* Capture Mode: Counter Clock Disable with RB Loading */
-#define		AT91_TC_ETRGEDG		(3 << 8)	/* Capture Mode: External Trigger Edge Selection */
-#define		AT91_TC_ABETRG		(1 << 10)	/* Capture Mode: TIOA or TIOB External Trigger Selection */
-#define		AT91_TC_CPCTRG		(1 << 14)	/* Capture Mode: RC Compare Trigger Enable */
-#define		AT91_TC_WAVE		(1 << 15)	/* Capture/Waveform mode */
-#define		AT91_TC_LDRA		(3 << 16)	/* Capture Mode: RA Loading Selection */
-#define		AT91_TC_LDRB		(3 << 18)	/* Capture Mode: RB Loading Selection */
-
-#define		AT91_TC_CPCSTOP		(1 <<  6)	/* Waveform Mode: Counter Clock Stopped with RC Compare */
-#define		AT91_TC_CPCDIS		(1 <<  7)	/* Waveform Mode: Counter Clock Disable with RC Compare */
-#define		AT91_TC_EEVTEDG		(3 <<  8)	/* Waveform Mode: External Event Edge Selection */
-#define			AT91_TC_EEVTEDG_NONE		(0 << 8)
-#define			AT91_TC_EEVTEDG_RISING		(1 << 8)
-#define			AT91_TC_EEVTEDG_FALLING		(2 << 8)
-#define			AT91_TC_EEVTEDG_BOTH		(3 << 8)
-#define		AT91_TC_EEVT		(3 << 10)	/* Waveform Mode: External Event Selection */
-#define			AT91_TC_EEVT_TIOB		(0 << 10)
-#define			AT91_TC_EEVT_XC0		(1 << 10)
-#define			AT91_TC_EEVT_XC1		(2 << 10)
-#define			AT91_TC_EEVT_XC2		(3 << 10)
-#define		AT91_TC_ENETRG		(1 << 12)	/* Waveform Mode: External Event Trigger Enable */
-#define		AT91_TC_WAVESEL		(3 << 13)	/* Waveform Mode: Waveform Selection */
-#define			AT91_TC_WAVESEL_UP		(0 << 13)
-#define			AT91_TC_WAVESEL_UP_AUTO		(2 << 13)
-#define			AT91_TC_WAVESEL_UPDOWN		(1 << 13)
-#define			AT91_TC_WAVESEL_UPDOWN_AUTO	(3 << 13)
-#define		AT91_TC_ACPA		(3 << 16)	/* Waveform Mode: RA Compare Effect on TIOA */
-#define			AT91_TC_ACPA_NONE		(0 << 16)
-#define			AT91_TC_ACPA_SET		(1 << 16)
-#define			AT91_TC_ACPA_CLEAR		(2 << 16)
-#define			AT91_TC_ACPA_TOGGLE		(3 << 16)
-#define		AT91_TC_ACPC		(3 << 18)	/* Waveform Mode: RC Compre Effect on TIOA */
-#define			AT91_TC_ACPC_NONE		(0 << 18)
-#define			AT91_TC_ACPC_SET		(1 << 18)
-#define			AT91_TC_ACPC_CLEAR		(2 << 18)
-#define			AT91_TC_ACPC_TOGGLE		(3 << 18)
-#define		AT91_TC_AEEVT		(3 << 20)	/* Waveform Mode: External Event Effect on TIOA */
-#define			AT91_TC_AEEVT_NONE		(0 << 20)
-#define			AT91_TC_AEEVT_SET		(1 << 20)
-#define			AT91_TC_AEEVT_CLEAR		(2 << 20)
-#define			AT91_TC_AEEVT_TOGGLE		(3 << 20)
-#define		AT91_TC_ASWTRG		(3 << 22)	/* Waveform Mode: Software Trigger Effect on TIOA */
-#define			AT91_TC_ASWTRG_NONE		(0 << 22)
-#define			AT91_TC_ASWTRG_SET		(1 << 22)
-#define			AT91_TC_ASWTRG_CLEAR		(2 << 22)
-#define			AT91_TC_ASWTRG_TOGGLE		(3 << 22)
-#define		AT91_TC_BCPB		(3 << 24)	/* Waveform Mode: RB Compare Effect on TIOB */
-#define			AT91_TC_BCPB_NONE		(0 << 24)
-#define			AT91_TC_BCPB_SET		(1 << 24)
-#define			AT91_TC_BCPB_CLEAR		(2 << 24)
-#define			AT91_TC_BCPB_TOGGLE		(3 << 24)
-#define		AT91_TC_BCPC		(3 << 26)	/* Waveform Mode: RC Compare Effect on TIOB */
-#define			AT91_TC_BCPC_NONE		(0 << 26)
-#define			AT91_TC_BCPC_SET		(1 << 26)
-#define			AT91_TC_BCPC_CLEAR		(2 << 26)
-#define			AT91_TC_BCPC_TOGGLE		(3 << 26)
-#define		AT91_TC_BEEVT		(3 << 28)	/* Waveform Mode: External Event Effect on TIOB */
-#define			AT91_TC_BEEVT_NONE		(0 << 28)
-#define			AT91_TC_BEEVT_SET		(1 << 28)
-#define			AT91_TC_BEEVT_CLEAR		(2 << 28)
-#define			AT91_TC_BEEVT_TOGGLE		(3 << 28)
-#define		AT91_TC_BSWTRG		(3 << 30)	/* Waveform Mode: Software Trigger Effect on TIOB */
-#define			AT91_TC_BSWTRG_NONE		(0 << 30)
-#define			AT91_TC_BSWTRG_SET		(1 << 30)
-#define			AT91_TC_BSWTRG_CLEAR		(2 << 30)
-#define			AT91_TC_BSWTRG_TOGGLE		(3 << 30)
-
-#define AT91_TC_CV		0x10		/* Counter Value */
-#define AT91_TC_RA		0x14		/* Register A */
-#define AT91_TC_RB		0x18		/* Register B */
-#define AT91_TC_RC		0x1c		/* Register C */
-
-#define AT91_TC_SR		0x20		/* Status Register */
-#define		AT91_TC_COVFS		(1 <<  0)	/* Counter Overflow Status */
-#define		AT91_TC_LOVRS		(1 <<  1)	/* Load Overrun Status */
-#define		AT91_TC_CPAS		(1 <<  2)	/* RA Compare Status */
-#define		AT91_TC_CPBS		(1 <<  3)	/* RB Compare Status */
-#define		AT91_TC_CPCS		(1 <<  4)	/* RC Compare Status */
-#define		AT91_TC_LDRAS		(1 <<  5)	/* RA Loading Status */
-#define		AT91_TC_LDRBS		(1 <<  6)	/* RB Loading Status */
-#define		AT91_TC_ETRGS		(1 <<  7)	/* External Trigger Status */
-#define		AT91_TC_CLKSTA		(1 << 16)	/* Clock Enabling Status */
-#define		AT91_TC_MTIOA		(1 << 17)	/* TIOA Mirror */
-#define		AT91_TC_MTIOB		(1 << 18)	/* TIOB Mirror */
-
-#define AT91_TC_IER		0x24		/* Interrupt Enable Register */
-#define AT91_TC_IDR		0x28		/* Interrupt Disable Register */
-#define AT91_TC_IMR		0x2c		/* Interrupt Mask Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_twi.h b/include/asm-arm/arch-at91rm9200/at91_twi.h
deleted file mode 100644
index cda914f..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_twi.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_twi.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Two-wire Interface (TWI) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_TWI_H
-#define AT91_TWI_H
-
-#define	AT91_TWI_CR		0x00		/* Control Register */
-#define		AT91_TWI_START		(1 <<  0)	/* Send a Start Condition */
-#define		AT91_TWI_STOP		(1 <<  1)	/* Send a Stop Condition */
-#define		AT91_TWI_MSEN		(1 <<  2)	/* Master Transfer Enable */
-#define		AT91_TWI_MSDIS		(1 <<  3)	/* Master Transfer Disable */
-#define		AT91_TWI_SWRST		(1 <<  7)	/* Software Reset */
-
-#define	AT91_TWI_MMR		0x04		/* Master Mode Register */
-#define		AT91_TWI_IADRSZ		(3    <<  8)	/* Internal Device Address Size */
-#define			AT91_TWI_IADRSZ_NO		(0 << 8)
-#define			AT91_TWI_IADRSZ_1		(1 << 8)
-#define			AT91_TWI_IADRSZ_2		(2 << 8)
-#define			AT91_TWI_IADRSZ_3		(3 << 8)
-#define		AT91_TWI_MREAD		(1    << 12)	/* Master Read Direction */
-#define		AT91_TWI_DADR		(0x7f << 16)	/* Device Address */
-
-#define	AT91_TWI_IADR		0x0c		/* Internal Address Register */
-
-#define	AT91_TWI_CWGR		0x10		/* Clock Waveform Generator Register */
-#define		AT91_TWI_CLDIV		(0xff <<  0)	/* Clock Low Divisor */
-#define		AT91_TWI_CHDIV		(0xff <<  8)	/* Clock High Divisor */
-#define		AT91_TWI_CKDIV		(7    << 16)	/* Clock Divider */
-
-#define	AT91_TWI_SR		0x20		/* Status Register */
-#define		AT91_TWI_TXCOMP		(1 <<  0)	/* Transmission Complete */
-#define		AT91_TWI_RXRDY		(1 <<  1)	/* Receive Holding Register Ready */
-#define		AT91_TWI_TXRDY		(1 <<  2)	/* Transmit Holding Register Ready */
-#define		AT91_TWI_OVRE		(1 <<  6)	/* Overrun Error [AT91RM9200 only] */
-#define		AT91_TWI_UNRE		(1 <<  7)	/* Underrun Error [AT91RM9200 only] */
-#define		AT91_TWI_NACK		(1 <<  8)	/* Not Acknowledged */
-
-#define	AT91_TWI_IER		0x24		/* Interrupt Enable Register */
-#define	AT91_TWI_IDR		0x28		/* Interrupt Disable Register */
-#define	AT91_TWI_IMR		0x2c		/* Interrupt Mask Register */
-#define	AT91_TWI_RHR		0x30		/* Receive Holding Register */
-#define	AT91_TWI_THR		0x34		/* Transmit Holding Register */
-
-#endif
-
diff --git a/include/asm-arm/arch-at91rm9200/at91_wdt.h b/include/asm-arm/arch-at91rm9200/at91_wdt.h
deleted file mode 100644
index ac63e77..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_wdt.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_wdt.h
- *
- * Watchdog Timer (WDT) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_WDT_H
-#define AT91_WDT_H
-
-#define AT91_WDT_CR		(AT91_WDT + 0x00)	/* Watchdog Control Register */
-#define		AT91_WDT_WDRSTT		(1    << 0)		/* Restart */
-#define		AT91_WDT_KEY		(0xff << 24)		/* KEY Password */
-
-#define AT91_WDT_MR		(AT91_WDT + 0x04)	/* Watchdog Mode Register */
-#define		AT91_WDT_WDV		(0xfff << 0)		/* Counter Value */
-#define		AT91_WDT_WDFIEN		(1     << 12)		/* Fault Interrupt Enable */
-#define		AT91_WDT_WDRSTEN	(1     << 13)		/* Reset Processor */
-#define		AT91_WDT_WDRPROC	(1     << 14)		/* Timer Restart */
-#define		AT91_WDT_WDDIS		(1     << 15)		/* Watchdog Disable */
-#define		AT91_WDT_WDD		(0xfff << 16)		/* Delta Value */
-#define		AT91_WDT_WDDBGHLT	(1     << 28)		/* Debug Halt */
-#define		AT91_WDT_WDIDLEHLT	(1     << 29)		/* Idle Halt */
-
-#define AT91_WDT_SR		(AT91_WDT + 0x08)	/* Watchdog Status Register */
-#define		AT91_WDT_WDUNF		(1 << 0)		/* Watchdog Underflow */
-#define		AT91_WDT_WDERR		(1 << 1)		/* Watchdog Error */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200.h b/include/asm-arm/arch-at91rm9200/at91rm9200.h
deleted file mode 100644
index c569b6a..0000000
--- a/include/asm-arm/arch-at91rm9200/at91rm9200.h
+++ /dev/null
@@ -1,291 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91rm9200.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Common definitions.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_H
-#define AT91RM9200_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripheral */
-#define AT91RM9200_ID_PIOA	2	/* Parallel IO Controller A */
-#define AT91RM9200_ID_PIOB	3	/* Parallel IO Controller B */
-#define AT91RM9200_ID_PIOC	4	/* Parallel IO Controller C */
-#define AT91RM9200_ID_PIOD	5	/* Parallel IO Controller D */
-#define AT91RM9200_ID_US0	6	/* USART 0 */
-#define AT91RM9200_ID_US1	7	/* USART 1 */
-#define AT91RM9200_ID_US2	8	/* USART 2 */
-#define AT91RM9200_ID_US3	9	/* USART 3 */
-#define AT91RM9200_ID_MCI	10	/* Multimedia Card Interface */
-#define AT91RM9200_ID_UDP	11	/* USB Device Port */
-#define AT91RM9200_ID_TWI	12	/* Two-Wire Interface */
-#define AT91RM9200_ID_SPI	13	/* Serial Peripheral Interface */
-#define AT91RM9200_ID_SSC0	14	/* Serial Synchronous Controller 0 */
-#define AT91RM9200_ID_SSC1	15	/* Serial Synchronous Controller 1 */
-#define AT91RM9200_ID_SSC2	16	/* Serial Synchronous Controller 2 */
-#define AT91RM9200_ID_TC0	17	/* Timer Counter 0 */
-#define AT91RM9200_ID_TC1	18	/* Timer Counter 1 */
-#define AT91RM9200_ID_TC2	19	/* Timer Counter 2 */
-#define AT91RM9200_ID_TC3	20	/* Timer Counter 3 */
-#define AT91RM9200_ID_TC4	21	/* Timer Counter 4 */
-#define AT91RM9200_ID_TC5	22	/* Timer Counter 5 */
-#define AT91RM9200_ID_UHP	23	/* USB Host port */
-#define AT91RM9200_ID_EMAC	24	/* Ethernet MAC */
-#define AT91RM9200_ID_IRQ0	25	/* Advanced Interrupt Controller (IRQ0) */
-#define AT91RM9200_ID_IRQ1	26	/* Advanced Interrupt Controller (IRQ1) */
-#define AT91RM9200_ID_IRQ2	27	/* Advanced Interrupt Controller (IRQ2) */
-#define AT91RM9200_ID_IRQ3	28	/* Advanced Interrupt Controller (IRQ3) */
-#define AT91RM9200_ID_IRQ4	29	/* Advanced Interrupt Controller (IRQ4) */
-#define AT91RM9200_ID_IRQ5	30	/* Advanced Interrupt Controller (IRQ5) */
-#define AT91RM9200_ID_IRQ6	31	/* Advanced Interrupt Controller (IRQ6) */
-
-
-/*
- * Peripheral physical base addresses.
- */
-#define AT91RM9200_BASE_TCB0	0xfffa0000
-#define AT91RM9200_BASE_TC0	0xfffa0000
-#define AT91RM9200_BASE_TC1	0xfffa0040
-#define AT91RM9200_BASE_TC2	0xfffa0080
-#define AT91RM9200_BASE_TCB1	0xfffa4000
-#define AT91RM9200_BASE_TC3	0xfffa4000
-#define AT91RM9200_BASE_TC4	0xfffa4040
-#define AT91RM9200_BASE_TC5	0xfffa4080
-#define AT91RM9200_BASE_UDP	0xfffb0000
-#define AT91RM9200_BASE_MCI	0xfffb4000
-#define AT91RM9200_BASE_TWI	0xfffb8000
-#define AT91RM9200_BASE_EMAC	0xfffbc000
-#define AT91RM9200_BASE_US0	0xfffc0000
-#define AT91RM9200_BASE_US1	0xfffc4000
-#define AT91RM9200_BASE_US2	0xfffc8000
-#define AT91RM9200_BASE_US3	0xfffcc000
-#define AT91RM9200_BASE_SSC0	0xfffd0000
-#define AT91RM9200_BASE_SSC1	0xfffd4000
-#define AT91RM9200_BASE_SSC2	0xfffd8000
-#define AT91RM9200_BASE_SPI	0xfffe0000
-#define AT91_BASE_SYS		0xfffff000
-
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)	/* Advanced Interrupt Controller */
-#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)	/* Debug Unit */
-#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)	/* PIO Controller A */
-#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)	/* PIO Controller B */
-#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)	/* PIO Controller C */
-#define AT91_PIOD	(0xfffffa00 - AT91_BASE_SYS)	/* PIO Controller D */
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)	/* Power Management Controller */
-#define AT91_ST		(0xfffffd00 - AT91_BASE_SYS)	/* System Timer */
-#define AT91_RTC	(0xfffffe00 - AT91_BASE_SYS)	/* Real-Time Clock */
-#define AT91_MC		(0xffffff00 - AT91_BASE_SYS)	/* Memory Controllers */
-
-#define AT91_MATRIX	0	/* not supported */
-
-/*
- * Internal Memory.
- */
-#define AT91RM9200_ROM_BASE	0x00100000	/* Internal ROM base address */
-#define AT91RM9200_ROM_SIZE	SZ_128K		/* Internal ROM size (128Kb) */
-
-#define AT91RM9200_SRAM_BASE	0x00200000	/* Internal SRAM base address */
-#define AT91RM9200_SRAM_SIZE	SZ_16K		/* Internal SRAM size (16Kb) */
-
-#define AT91RM9200_UHP_BASE	0x00300000	/* USB Host controller */
-
-
-#if 0
-/*
- * PIO pin definitions (peripheral A/B multiplexing).
- */
-#define AT91_PA0_MISO		(1 <<  0)	/* A: SPI Master-In Slave-Out */
-#define AT91_PA0_PCK3		(1 <<  0)	/* B: PMC Programmable Clock Output 3 */
-#define AT91_PA1_MOSI		(1 <<  1)	/* A: SPI Master-Out Slave-In */
-#define AT91_PA1_PCK0		(1 <<  1)	/* B: PMC Programmable Clock Output 0 */
-#define AT91_PA2_SPCK		(1 <<  2)	/* A: SPI Serial Clock */
-#define AT91_PA2_IRQ4		(1 <<  2)	/* B: External Interrupt 4 */
-#define AT91_PA3_NPCS0		(1 <<  3)	/* A: SPI Peripheral Chip Select 0 */
-#define AT91_PA3_IRQ5		(1 <<  3)	/* B: External Interrupt 5 */
-#define AT91_PA4_NPCS1		(1 <<  4)	/* A: SPI Peripheral Chip Select 1 */
-#define AT91_PA4_PCK1		(1 <<  4)	/* B: PMC Programmable Clock Output 1 */
-#define AT91_PA5_NPCS2		(1 <<  5)	/* A: SPI Peripheral Chip Select 2 */
-#define AT91_PA5_TXD3		(1 <<  5)	/* B: USART Transmit Data 3 */
-#define AT91_PA6_NPCS3		(1 <<  6)	/* A: SPI Peripheral Chip Select 3 */
-#define AT91_PA6_RXD3		(1 <<  6)	/* B: USART Receive Data 3 */
-#define AT91_PA7_ETXCK_EREFCK	(1 <<  7)	/* A: Ethernet Reference Clock / Transmit Clock */
-#define AT91_PA7_PCK2		(1 <<  7)	/* B: PMC Programmable Clock Output 2 */
-#define AT91_PA8_ETXEN		(1 <<  8)	/* A: Ethernet Transmit Enable */
-#define AT91_PA8_MCCDB		(1 <<  8)	/* B: MMC Multimedia Card B Command */
-#define AT91_PA9_ETX0		(1 <<  9)	/* A: Ethernet Transmit Data 0 */
-#define AT91_PA9_MCDB0		(1 <<  9)	/* B: MMC Multimedia Card B Data 0 */
-#define AT91_PA10_ETX1		(1 << 10)	/* A: Ethernet Transmit Data 1 */
-#define AT91_PA10_MCDB1		(1 << 10)	/* B: MMC Multimedia Card B Data 1 */
-#define AT91_PA11_ECRS_ECRSDV	(1 << 11)	/* A: Ethernet Carrier Sense / Data Valid */
-#define AT91_PA11_MCDB2		(1 << 11)	/* B: MMC Multimedia Card B Data 2 */
-#define AT91_PA12_ERX0		(1 << 12)	/* A: Ethernet Receive Data 0 */
-#define AT91_PA12_MCDB3		(1 << 12)	/* B: MMC Multimedia Card B Data 3 */
-#define AT91_PA13_ERX1		(1 << 13)	/* A: Ethernet Receive Data 1 */
-#define AT91_PA13_TCLK0		(1 << 13)	/* B: TC External Clock Input 0 */
-#define AT91_PA14_ERXER		(1 << 14)	/* A: Ethernet Receive Error */
-#define AT91_PA14_TCLK1		(1 << 14)	/* B: TC External Clock Input 1 */
-#define AT91_PA15_EMDC		(1 << 15)	/* A: Ethernet Management Data Clock */
-#define AT91_PA15_TCLK2		(1 << 15)	/* B: TC External Clock Input 2 */
-#define AT91_PA16_EMDIO		(1 << 16)	/* A: Ethernet Management Data I/O */
-#define AT91_PA16_IRQ6		(1 << 16)	/* B: External Interrupt 6 */
-#define AT91_PA17_TXD0		(1 << 17)	/* A: USART Transmit Data 0 */
-#define AT91_PA17_TIOA0		(1 << 17)	/* B: TC I/O Line A 0 */
-#define AT91_PA18_RXD0		(1 << 18)	/* A: USART Receive Data 0 */
-#define AT91_PA18_TIOB0		(1 << 18)	/* B: TC I/O Line B 0 */
-#define AT91_PA19_SCK0		(1 << 19)	/* A: USART Serial Clock 0 */
-#define AT91_PA19_TIOA1		(1 << 19)	/* B: TC I/O Line A 1 */
-#define AT91_PA20_CTS0		(1 << 20)	/* A: USART Clear To Send 0 */
-#define AT91_PA20_TIOB1		(1 << 20)	/* B: TC I/O Line B 1 */
-#define AT91_PA21_RTS0		(1 << 21)	/* A: USART Ready To Send 0 */
-#define AT91_PA21_TIOA2		(1 << 21)	/* B: TC I/O Line A 2 */
-#define AT91_PA22_RXD2		(1 << 22)	/* A: USART Receive Data 2 */
-#define AT91_PA22_TIOB2		(1 << 22)	/* B: TC I/O Line B 2 */
-#define AT91_PA23_TXD2		(1 << 23)	/* A: USART Transmit Data 2 */
-#define AT91_PA23_IRQ3		(1 << 23)	/* B: External Interrupt 3 */
-#define AT91_PA24_SCK2		(1 << 24)	/* A: USART Serial Clock 2 */
-#define AT91_PA24_PCK1		(1 << 24)	/* B: PMC Programmable Clock Output 1 */
-#define AT91_PA25_TWD		(1 << 25)	/* A: TWI Two-wire Serial Data */
-#define AT91_PA25_IRQ2		(1 << 25)	/* B: External Interrupt 2 */
-#define AT91_PA26_TWCK		(1 << 26)	/* A: TWI Two-wire Serial Clock */
-#define AT91_PA26_IRQ1		(1 << 26)	/* B: External Interrupt 1 */
-#define AT91_PA27_MCCK		(1 << 27)	/* A: MMC Multimedia Card Clock */
-#define AT91_PA27_TCLK3		(1 << 27)	/* B: TC External Clock Input 3 */
-#define AT91_PA28_MCCDA		(1 << 28)	/* A: MMC Multimedia Card A Command */
-#define AT91_PA28_TCLK4		(1 << 28)	/* B: TC External Clock Input 4 */
-#define AT91_PA29_MCDA0		(1 << 29)	/* A: MMC Multimedia Card A Data 0 */
-#define AT91_PA29_TCLK5		(1 << 29)	/* B: TC External Clock Input 5 */
-#define AT91_PA30_DRXD		(1 << 30)	/* A: DBGU Receive Data */
-#define AT91_PA30_CTS2		(1 << 30)	/* B: USART Clear To Send 2 */
-#define AT91_PA31_DTXD		(1 << 31)	/* A: DBGU Transmit Data */
-#define AT91_PA31_RTS2		(1 << 31)	/* B: USART Ready To Send 2 */
-
-#define AT91_PB0_TF0		(1 <<  0)	/* A: SSC Transmit Frame Sync 0 */
-#define AT91_PB0_RTS3		(1 <<  0)	/* B: USART Ready To Send 3 */
-#define AT91_PB1_TK0		(1 <<  1)	/* A: SSC Transmit Clock 0 */
-#define AT91_PB1_CTS3		(1 <<  1)	/* B: USART Clear To Send 3 */
-#define AT91_PB2_TD0		(1 <<  2)	/* A: SSC Transmit Data 0 */
-#define AT91_PB2_SCK3		(1 <<  2)	/* B: USART Serial Clock 3 */
-#define AT91_PB3_RD0		(1 <<  3)	/* A: SSC Receive Data 0 */
-#define AT91_PB3_MCDA1		(1 <<  3)	/* B: MMC Multimedia Card A Data 1 */
-#define AT91_PB4_RK0		(1 <<  4)	/* A: SSC Receive Clock 0 */
-#define AT91_PB4_MCDA2		(1 <<  4)	/* B: MMC Multimedia Card A Data 2 */
-#define AT91_PB5_RF0		(1 <<  5)	/* A: SSC Receive Frame Sync 0 */
-#define AT91_PB5_MCDA3		(1 <<  5)	/* B: MMC Multimedia Card A Data 3 */
-#define AT91_PB6_TF1		(1 <<  6)	/* A: SSC Transmit Frame Sync 1 */
-#define AT91_PB6_TIOA3		(1 <<  6)	/* B: TC I/O Line A 3 */
-#define AT91_PB7_TK1		(1 <<  7)	/* A: SSC Transmit Clock 1 */
-#define AT91_PB7_TIOB3		(1 <<  7)	/* B: TC I/O Line B 3 */
-#define AT91_PB8_TD1		(1 <<  8)	/* A: SSC Transmit Data 1 */
-#define AT91_PB8_TIOA4		(1 <<  8)	/* B: TC I/O Line A 4 */
-#define AT91_PB9_RD1		(1 <<  9)	/* A: SSC Receive Data 1 */
-#define AT91_PB9_TIOB4		(1 <<  9)	/* B: TC I/O Line B 4 */
-#define AT91_PB10_RK1		(1 << 10)	/* A: SSC Receive Clock 1 */
-#define AT91_PB10_TIOA5		(1 << 10)	/* B: TC I/O Line A 5 */
-#define AT91_PB11_RF1		(1 << 11)	/* A: SSC Receive Frame Sync 1 */
-#define AT91_PB11_TIOB5		(1 << 11)	/* B: TC I/O Line B 5 */
-#define AT91_PB12_TF2		(1 << 12)	/* A: SSC Transmit Frame Sync 2 */
-#define AT91_PB12_ETX2		(1 << 12)	/* B: Ethernet Transmit Data 2 */
-#define AT91_PB13_TK2		(1 << 13)	/* A: SSC Transmit Clock 3 */
-#define AT91_PB13_ETX3		(1 << 13)	/* B: Ethernet Transmit Data 3 */
-#define AT91_PB14_TD2		(1 << 14)	/* A: SSC Transmit Data 2 */
-#define AT91_PB14_ETXER		(1 << 14)	/* B: Ethernet Transmit Coding Error */
-#define AT91_PB15_RD2		(1 << 15)	/* A: SSC Receive Data 2 */
-#define AT91_PB15_ERX2		(1 << 15)	/* B: Ethernet Receive Data 2 */
-#define AT91_PB16_RK2		(1 << 16)	/* A: SSC Receive Clock 2 */
-#define AT91_PB16_ERX3		(1 << 16)	/* B: Ethernet Receive Data 3 */
-#define AT91_PB17_RF2		(1 << 17)	/* A: SSC Receive Frame Sync 2 */
-#define AT91_PB17_ERXDV		(1 << 17)	/* B: Ethernet Receive Data Valid */
-#define AT91_PB18_RI1		(1 << 18)	/* A: USART Ring Indicator 1 */
-#define AT91_PB18_ECOL		(1 << 18)	/* B: Ethernet Collision Detected */
-#define AT91_PB19_DTR1		(1 << 19)	/* A: USART Data Terminal Ready 1 */
-#define AT91_PB19_ERXCK		(1 << 19)	/* B: Ethernet Receive Clock */
-#define AT91_PB20_TXD1		(1 << 20)	/* A: USART Transmit Data 1 */
-#define AT91_PB21_RXD1		(1 << 21)	/* A: USART Receive Data 1 */
-#define AT91_PB22_SCK1		(1 << 22)	/* A: USART Serial Clock 1 */
-#define AT91_PB23_DCD1		(1 << 23)	/* A: USART Data Carrier Detect 1 */
-#define AT91_PB24_CTS1		(1 << 24)	/* A: USART Clear To Send 1 */
-#define AT91_PB25_DSR1		(1 << 25)	/* A: USART Data Set Ready 1 */
-#define AT91_PB25_EF100		(1 << 25)	/* B: Ethernet Force 100 Mbit */
-#define AT91_PB26_RTS1		(1 << 26)	/* A: USART Ready To Send 1 */
-#define AT91_PB27_PCK0		(1 << 27)	/* B: PMC Programmable Clock Output 0 */
-#define AT91_PB28_FIQ		(1 << 28)	/* A: Fast Interrupt */
-#define AT91_PB29_IRQ0		(1 << 29)	/* A: External Interrupt 0 */
-
-#define AT91_PC0_BFCK		(1 <<  0)	/* A: Burst Flash Clock */
-#define AT91_PC1_BFRDY_SMOE	(1 <<  1)	/* A: Burst Flash Ready / SmartMedia Output Enable */
-#define AT91_PC2_BFAVD		(1 <<  2)	/* A: Burst Flash Address Valid */
-#define AT91_PC3_BFBAA_SMWE	(1 <<  3)	/* A: Burst Flash Address Advance / SmartMedia Write Enable */
-#define AT91_PC4_BFOE		(1 <<  4)	/* A: Burst Flash Output Enable */
-#define AT91_PC5_BFWE		(1 <<  5)	/* A: Burst Flash Write Enable */
-#define AT91_PC6_NWAIT		(1 <<  6)	/* A: SMC Wait Signal */
-#define AT91_PC7_A23		(1 <<  7)	/* A: Address Bus 23 */
-#define AT91_PC8_A24		(1 <<  8)	/* A: Address Bus 24 */
-#define AT91_PC9_A25_CFRNW	(1 <<  9)	/* A: Address Bus 25 / Compact Flash Read Not Write */
-#define AT91_PC10_NCS4_CFCS	(1 << 10)	/* A: SMC Chip Select 4 / Compact Flash Chip Select */
-#define AT91_PC11_NCS5_CFCE1	(1 << 11)	/* A: SMC Chip Select 5 / Compact Flash Chip Enable 1 */
-#define AT91_PC12_NCS6_CFCE2	(1 << 12)	/* A: SMC Chip Select 6 / Compact Flash Chip Enable 2 */
-#define AT91_PC13_NCS7		(1 << 13)	/* A: Chip Select 7 */
-
-#define AT91_PD0_ETX0		(1 <<  0)	/* A: Ethernet Transmit Data 0 */
-#define AT91_PD1_ETX1		(1 <<  1)	/* A: Ethernet Transmit Data 1 */
-#define AT91_PD2_ETX2		(1 <<  2)	/* A: Ethernet Transmit Data 2 */
-#define AT91_PD3_ETX3		(1 <<  3)	/* A: Ethernet Transmit Data 3 */
-#define AT91_PD4_ETXEN		(1 <<  4)	/* A: Ethernet Transmit Enable */
-#define AT91_PD5_ETXER		(1 <<  5)	/* A: Ethernet Transmit Coding Error */
-#define AT91_PD6_DTXD		(1 <<  6)	/* A: DBGU Transmit Data */
-#define AT91_PD7_PCK0		(1 <<  7)	/* A: PMC Programmable Clock Output 0 */
-#define AT91_PD7_TSYNC		(1 <<  7)	/* B: ETM Trace Synchronization Signal */
-#define AT91_PD8_PCK1		(1 <<  8)	/* A: PMC Programmable Clock Output 1 */
-#define AT91_PD8_TCLK		(1 <<  8)	/* B: ETM Trace Clock */
-#define AT91_PD9_PCK2		(1 <<  9)	/* A: PMC Programmable Clock Output 2 */
-#define AT91_PD9_TPS0		(1 <<  9)	/* B: ETM Trace ARM Pipeline Status 0 */
-#define AT91_PD10_PCK3		(1 << 10)	/* A: PMC Programmable Clock Output 3 */
-#define AT91_PD10_TPS1		(1 << 10)	/* B: ETM Trace ARM Pipeline Status 1 */
-#define AT91_PD11_TPS2		(1 << 11)	/* B: ETM Trace ARM Pipeline Status 2 */
-#define AT91_PD12_TPK0		(1 << 12)	/* B: ETM Trace Packet Port 0 */
-#define AT91_PD13_TPK1		(1 << 13)	/* B: ETM Trace Packet Port 1 */
-#define AT91_PD14_TPK2		(1 << 14)	/* B: ETM Trace Packet Port 2 */
-#define AT91_PD15_TD0		(1 << 15)	/* A: SSC Transmit Data 0 */
-#define AT91_PD15_TPK3		(1 << 15)	/* B: ETM Trace Packet Port 3 */
-#define AT91_PD16_TD1		(1 << 16)	/* A: SSC Transmit Data 1 */
-#define AT91_PD16_TPK4		(1 << 16)	/* B: ETM Trace Packet Port 4 */
-#define AT91_PD17_TD2		(1 << 17)	/* A: SSC Transmit Data 2 */
-#define AT91_PD17_TPK5		(1 << 17)	/* B: ETM Trace Packet Port 5 */
-#define AT91_PD18_NPCS1		(1 << 18)	/* A: SPI Peripheral Chip Select 1 */
-#define AT91_PD18_TPK6		(1 << 18)	/* B: ETM Trace Packet Port 6 */
-#define AT91_PD19_NPCS2		(1 << 19)	/* A: SPI Peripheral Chip Select 2 */
-#define AT91_PD19_TPK7		(1 << 19)	/* B: ETM Trace Packet Port 7 */
-#define AT91_PD20_NPCS3		(1 << 20)	/* A: SPI Peripheral Chip Select 3 */
-#define AT91_PD20_TPK8		(1 << 20)	/* B: ETM Trace Packet Port 8 */
-#define AT91_PD21_RTS0		(1 << 21)	/* A: USART Ready To Send 0 */
-#define AT91_PD21_TPK9		(1 << 21)	/* B: ETM Trace Packet Port 9 */
-#define AT91_PD22_RTS1		(1 << 22)	/* A: USART Ready To Send 1 */
-#define AT91_PD22_TPK10		(1 << 22)	/* B: ETM Trace Packet Port 10 */
-#define AT91_PD23_RTS2		(1 << 23)	/* A: USART Ready To Send 2 */
-#define AT91_PD23_TPK11		(1 << 23)	/* B: ETM Trace Packet Port 11 */
-#define AT91_PD24_RTS3		(1 << 24)	/* A: USART Ready To Send 3 */
-#define AT91_PD24_TPK12		(1 << 24)	/* B: ETM Trace Packet Port 12 */
-#define AT91_PD25_DTR1		(1 << 25)	/* A: USART Data Terminal Ready 1 */
-#define AT91_PD25_TPK13		(1 << 25)	/* B: ETM Trace Packet Port 13 */
-#define AT91_PD26_TPK14		(1 << 26)	/* B: ETM Trace Packet Port 14 */
-#define AT91_PD27_TPK15		(1 << 27)	/* B: ETM Trace Packet Port 15 */
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_emac.h b/include/asm-arm/arch-at91rm9200/at91rm9200_emac.h
deleted file mode 100644
index fbc091e..0000000
--- a/include/asm-arm/arch-at91rm9200/at91rm9200_emac.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91rm9200_emac.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Ethernet MAC registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_EMAC_H
-#define AT91RM9200_EMAC_H
-
-#define	AT91_EMAC_CTL		0x00	/* Control Register */
-#define		AT91_EMAC_LB		(1 <<  0)	/* Loopback */
-#define		AT91_EMAC_LBL		(1 <<  1)	/* Loopback Local */
-#define		AT91_EMAC_RE		(1 <<  2)	/* Receive Enable */
-#define		AT91_EMAC_TE		(1 <<  3)	/* Transmit Enable */
-#define		AT91_EMAC_MPE		(1 <<  4)	/* Management Port Enable */
-#define		AT91_EMAC_CSR		(1 <<  5)	/* Clear Statistics Registers */
-#define		AT91_EMAC_INCSTAT	(1 <<  6)	/* Increment Statistics Registers */
-#define		AT91_EMAC_WES		(1 <<  7)	/* Write Enable for Statistics Registers */
-#define		AT91_EMAC_BP		(1 <<  8)	/* Back Pressure */
-
-#define	AT91_EMAC_CFG		0x04	/* Configuration Register */
-#define		AT91_EMAC_SPD		(1 <<  0)	/* Speed */
-#define		AT91_EMAC_FD		(1 <<  1)	/* Full Duplex */
-#define		AT91_EMAC_BR		(1 <<  2)	/* Bit Rate */
-#define		AT91_EMAC_CAF		(1 <<  4)	/* Copy All Frames */
-#define		AT91_EMAC_NBC		(1 <<  5)	/* No Broadcast */
-#define		AT91_EMAC_MTI		(1 <<  6)	/* Multicast Hash Enable */
-#define		AT91_EMAC_UNI		(1 <<  7)	/* Unicast Hash Enable */
-#define		AT91_EMAC_BIG		(1 <<  8)	/* Receive 1522 Bytes */
-#define		AT91_EMAC_EAE		(1 <<  9)	/* External Address Match Enable */
-#define		AT91_EMAC_CLK		(3 << 10)	/* MDC Clock Divisor */
-#define		AT91_EMAC_CLK_DIV8		(0 << 10)
-#define		AT91_EMAC_CLK_DIV16		(1 << 10)
-#define		AT91_EMAC_CLK_DIV32		(2 << 10)
-#define		AT91_EMAC_CLK_DIV64		(3 << 10)
-#define		AT91_EMAC_RTY		(1 << 12)	/* Retry Test */
-#define		AT91_EMAC_RMII		(1 << 13)	/* Reduce MII (RMII) */
-
-#define	AT91_EMAC_SR		0x08	/* Status Register */
-#define		AT91_EMAC_SR_LINK	(1 <<  0)	/* Link */
-#define		AT91_EMAC_SR_MDIO	(1 <<  1)	/* MDIO pin */
-#define		AT91_EMAC_SR_IDLE	(1 <<  2)	/* PHY idle */
-
-#define	AT91_EMAC_TAR		0x0c	/* Transmit Address Register */
-
-#define	AT91_EMAC_TCR		0x10	/* Transmit Control Register */
-#define		AT91_EMAC_LEN		(0x7ff << 0)	/* Transmit Frame Length */
-#define		AT91_EMAC_NCRC		(1     << 15)	/* No CRC */
-
-#define	AT91_EMAC_TSR		0x14	/* Transmit Status Register */
-#define		AT91_EMAC_TSR_OVR	(1 <<  0)	/* Transmit Buffer Overrun */
-#define		AT91_EMAC_TSR_COL	(1 <<  1)	/* Collision Occurred */
-#define		AT91_EMAC_TSR_RLE	(1 <<  2)	/* Retry Limit Exceeded */
-#define		AT91_EMAC_TSR_IDLE	(1 <<  3)	/* Transmitter Idle */
-#define		AT91_EMAC_TSR_BNQ	(1 <<  4)	/* Transmit Buffer not Queued */
-#define		AT91_EMAC_TSR_COMP	(1 <<  5)	/* Transmit Complete */
-#define		AT91_EMAC_TSR_UND	(1 <<  6)	/* Transmit Underrun */
-
-#define	AT91_EMAC_RBQP		0x18	/* Receive Buffer Queue Pointer */
-
-#define	AT91_EMAC_RSR		0x20	/* Receive Status Register */
-#define		AT91_EMAC_RSR_BNA	(1 <<  0)	/* Buffer Not Available */
-#define		AT91_EMAC_RSR_REC	(1 <<  1)	/* Frame Received */
-#define		AT91_EMAC_RSR_OVR	(1 <<  2)	/* RX Overrun */
-
-#define	AT91_EMAC_ISR		0x24	/* Interrupt Status Register */
-#define		AT91_EMAC_DONE		(1 <<  0)	/* Management Done */
-#define		AT91_EMAC_RCOM		(1 <<  1)	/* Receive Complete */
-#define		AT91_EMAC_RBNA		(1 <<  2)	/* Receive Buffer Not Available */
-#define		AT91_EMAC_TOVR		(1 <<  3)	/* Transmit Buffer Overrun */
-#define		AT91_EMAC_TUND		(1 <<  4)	/* Transmit Buffer Underrun */
-#define		AT91_EMAC_RTRY		(1 <<  5)	/* Retry Limit */
-#define		AT91_EMAC_TBRE		(1 <<  6)	/* Transmit Buffer Register Empty */
-#define		AT91_EMAC_TCOM		(1 <<  7)	/* Transmit Complete */
-#define		AT91_EMAC_TIDLE		(1 <<  8)	/* Transmit Idle */
-#define		AT91_EMAC_LINK		(1 <<  9)	/* Link */
-#define		AT91_EMAC_ROVR		(1 << 10)	/* RX Overrun */
-#define		AT91_EMAC_ABT		(1 << 11)	/* Abort */
-
-#define	AT91_EMAC_IER		0x28	/* Interrupt Enable Register */
-#define	AT91_EMAC_IDR		0x2c	/* Interrupt Disable Register */
-#define	AT91_EMAC_IMR		0x30	/* Interrupt Mask Register */
-
-#define	AT91_EMAC_MAN		0x34	/* PHY Maintenance Register */
-#define		AT91_EMAC_DATA		(0xffff << 0)	/* MDIO Data */
-#define		AT91_EMAC_REGA		(0x1f	<< 18)	/* MDIO Register */
-#define		AT91_EMAC_PHYA		(0x1f	<< 23)	/* MDIO PHY Address */
-#define		AT91_EMAC_RW		(3	<< 28)	/* Read/Write operation */
-#define			AT91_EMAC_RW_W		(1 << 28)
-#define			AT91_EMAC_RW_R		(2 << 28)
-#define		AT91_EMAC_MAN_802_3	0x40020000	/* IEEE 802.3 value */
-
-/*
- * Statistics Registers.
- */
-#define AT91_EMAC_FRA		0x40	/* Frames Transmitted OK */
-#define AT91_EMAC_SCOL		0x44	/* Single Collision Frame */
-#define AT91_EMAC_MCOL		0x48	/* Multiple Collision Frame */
-#define AT91_EMAC_OK		0x4c	/* Frames Received OK */
-#define AT91_EMAC_SEQE		0x50	/* Frame Check Sequence Error */
-#define AT91_EMAC_ALE		0x54	/* Alignmemt Error */
-#define AT91_EMAC_DTE		0x58	/* Deffered Transmission Frame */
-#define AT91_EMAC_LCOL		0x5c	/* Late Collision */
-#define AT91_EMAC_ECOL		0x60	/* Excessive Collision */
-#define AT91_EMAC_TUE		0x64	/* Transmit Underrun Error */
-#define AT91_EMAC_CSE		0x68	/* Carrier Sense Error */
-#define AT91_EMAC_DRFC		0x6c	/* Discard RX Frame */
-#define AT91_EMAC_ROV		0x70	/* Receive Overrun */
-#define AT91_EMAC_CDE		0x74	/* Code Error */
-#define AT91_EMAC_ELR		0x78	/* Excessive Length Error */
-#define AT91_EMAC_RJB		0x7c	/* Receive Jabber */
-#define AT91_EMAC_USF		0x80	/* Undersize Frame */
-#define AT91_EMAC_SQEE		0x84	/* SQE Test Error */
-
-/*
- * Address Registers.
- */
-#define AT91_EMAC_HSL		0x90	/* Hash Address Low [31:0] */
-#define AT91_EMAC_HSH		0x94	/* Hash Address High [63:32] */
-#define AT91_EMAC_SA1L		0x98	/* Specific Address 1 Low, bytes 0-3 */
-#define AT91_EMAC_SA1H		0x9c	/* Specific Address 1 High, bytes 4-5 */
-#define AT91_EMAC_SA2L		0xa0	/* Specific Address 2 Low, bytes 0-3 */
-#define AT91_EMAC_SA2H		0xa4	/* Specific Address 2 High, bytes 4-5 */
-#define AT91_EMAC_SA3L		0xa8	/* Specific Address 3 Low, bytes 0-3 */
-#define AT91_EMAC_SA3H		0xac	/* Specific Address 3 High, bytes 4-5 */
-#define AT91_EMAC_SA4L		0xb0	/* Specific Address 4 Low, bytes 0-3 */
-#define AT91_EMAC_SA4H		0xb4	/* Specific Address 4 High, bytes 4-5 */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_mc.h b/include/asm-arm/arch-at91rm9200/at91rm9200_mc.h
deleted file mode 100644
index 0c0d814..0000000
--- a/include/asm-arm/arch-at91rm9200/at91rm9200_mc.h
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91rm9200_mc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_MC_H
-#define AT91RM9200_MC_H
-
-/* Memory Controller */
-#define AT91_MC_RCR		(AT91_MC + 0x00)	/* MC Remap Control Register */
-#define		AT91_MC_RCB		(1 <<  0)		/* Remap Command Bit */
-
-#define AT91_MC_ASR		(AT91_MC + 0x04)	/* MC Abort Status Register */
-#define		AT91_MC_UNADD		(1 <<  0)		/* Undefined Address Abort Status */
-#define		AT91_MC_MISADD		(1 <<  1)		/* Misaligned Address Abort Status */
-#define		AT91_MC_ABTSZ		(3 <<  8)		/* Abort Size Status */
-#define			AT91_MC_ABTSZ_BYTE		(0 << 8)
-#define			AT91_MC_ABTSZ_HALFWORD		(1 << 8)
-#define			AT91_MC_ABTSZ_WORD		(2 << 8)
-#define		AT91_MC_ABTTYP		(3 << 10)		/* Abort Type Status */
-#define			AT91_MC_ABTTYP_DATAREAD		(0 << 10)
-#define			AT91_MC_ABTTYP_DATAWRITE	(1 << 10)
-#define			AT91_MC_ABTTYP_FETCH		(2 << 10)
-#define		AT91_MC_MST0		(1 << 16)		/* ARM920T Abort Source */
-#define		AT91_MC_MST1		(1 << 17)		/* PDC Abort Source */
-#define		AT91_MC_MST2		(1 << 18)		/* UHP Abort Source */
-#define		AT91_MC_MST3		(1 << 19)		/* EMAC Abort Source */
-#define		AT91_MC_SVMST0		(1 << 24)		/* Saved ARM920T Abort Source */
-#define		AT91_MC_SVMST1		(1 << 25)		/* Saved PDC Abort Source */
-#define		AT91_MC_SVMST2		(1 << 26)		/* Saved UHP Abort Source */
-#define		AT91_MC_SVMST3		(1 << 27)		/* Saved EMAC Abort Source */
-
-#define AT91_MC_AASR		(AT91_MC + 0x08)	/* MC Abort Address Status Register */
-
-#define AT91_MC_MPR		(AT91_MC + 0x0c)	/* MC Master Priority Register */
-#define		AT91_MPR_MSTP0		(7 <<  0)		/* ARM920T Priority */
-#define		AT91_MPR_MSTP1		(7 <<  4)		/* PDC Priority */
-#define		AT91_MPR_MSTP2		(7 <<  8)		/* UHP Priority */
-#define		AT91_MPR_MSTP3		(7 << 12)		/* EMAC Priority */
-
-/* External Bus Interface (EBI) registers */
-#define AT91_EBI_CSA		(AT91_MC + 0x60)	/* Chip Select Assignment Register */
-#define		AT91_EBI_CS0A		(1 << 0)		/* Chip Select 0 Assignment */
-#define			AT91_EBI_CS0A_SMC		(0 << 0)
-#define			AT91_EBI_CS0A_BFC		(1 << 0)
-#define		AT91_EBI_CS1A		(1 << 1)		/* Chip Select 1 Assignment */
-#define			AT91_EBI_CS1A_SMC		(0 << 1)
-#define			AT91_EBI_CS1A_SDRAMC		(1 << 1)
-#define		AT91_EBI_CS3A		(1 << 3)		/* Chip Select 2 Assignment */
-#define			AT91_EBI_CS3A_SMC		(0 << 3)
-#define			AT91_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_EBI_CS4A		(1 << 4)		/* Chip Select 3 Assignment */
-#define			AT91_EBI_CS4A_SMC		(0 << 4)
-#define			AT91_EBI_CS4A_SMC_COMPACTFLASH	(1 << 4)
-#define AT91_EBI_CFGR		(AT91_MC + 0x64)	/* Configuration Register */
-#define		AT91_EBI_DBPUC		(1 << 0)		/* Data Bus Pull-Up Configuration */
-
-/* Static Memory Controller (SMC) registers */
-#define	AT91_SMC_CSR(n)		(AT91_MC + 0x70 + ((n) * 4))/* SMC Chip Select Register */
-#define		AT91_SMC_NWS		(0x7f <<  0)		/* Number of Wait States */
-#define			AT91_SMC_NWS_(x)	((x) << 0)
-#define		AT91_SMC_WSEN		(1    <<  7)		/* Wait State Enable */
-#define		AT91_SMC_TDF		(0xf  <<  8)		/* Data Float Time */
-#define			AT91_SMC_TDF_(x)	((x) << 8)
-#define		AT91_SMC_BAT		(1    << 12)		/* Byte Access Type */
-#define		AT91_SMC_DBW		(3    << 13)		/* Data Bus Width */
-#define			AT91_SMC_DBW_16		(1 << 13)
-#define			AT91_SMC_DBW_8		(2 << 13)
-#define		AT91_SMC_DPR		(1 << 15)		/* Data Read Protocol */
-#define		AT91_SMC_ACSS		(3 << 16)		/* Address to Chip Select Setup */
-#define			AT91_SMC_ACSS_STD	(0 << 16)
-#define			AT91_SMC_ACSS_1		(1 << 16)
-#define			AT91_SMC_ACSS_2		(2 << 16)
-#define			AT91_SMC_ACSS_3		(3 << 16)
-#define		AT91_SMC_RWSETUP	(7 << 24)		/* Read & Write Signal Time Setup */
-#define			AT91_SMC_RWSETUP_(x)	((x) << 24)
-#define		AT91_SMC_RWHOLD		(7 << 28)		/* Read & Write Signal Hold Time */
-#define			AT91_SMC_RWHOLD_(x)	((x) << 28)
-
-/* SDRAM Controller registers */
-#define AT91_SDRAMC_MR		(AT91_MC + 0x90)	/* Mode Register */
-#define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
-#define			AT91_SDRAMC_MODE_NORMAL		(0 << 0)
-#define			AT91_SDRAMC_MODE_NOP		(1 << 0)
-#define			AT91_SDRAMC_MODE_PRECHARGE	(2 << 0)
-#define			AT91_SDRAMC_MODE_LMR		(3 << 0)
-#define			AT91_SDRAMC_MODE_REFRESH	(4 << 0)
-#define		AT91_SDRAMC_DBW		(1   << 4)		/* Data Bus Width */
-#define			AT91_SDRAMC_DBW_32	(0 << 4)
-#define			AT91_SDRAMC_DBW_16	(1 << 4)
-
-#define AT91_SDRAMC_TR		(AT91_MC + 0x94)	/* Refresh Timer Register */
-#define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Count */
-
-#define AT91_SDRAMC_CR		(AT91_MC + 0x98)	/* Configuration Register */
-#define		AT91_SDRAMC_NC		(3   <<  0)		/* Number of Column Bits */
-#define			AT91_SDRAMC_NC_8	(0 << 0)
-#define			AT91_SDRAMC_NC_9	(1 << 0)
-#define			AT91_SDRAMC_NC_10	(2 << 0)
-#define			AT91_SDRAMC_NC_11	(3 << 0)
-#define		AT91_SDRAMC_NR		(3   <<  2)		/* Number of Row Bits */
-#define			AT91_SDRAMC_NR_11	(0 << 2)
-#define			AT91_SDRAMC_NR_12	(1 << 2)
-#define			AT91_SDRAMC_NR_13	(2 << 2)
-#define		AT91_SDRAMC_NB		(1   <<  4)		/* Number of Banks */
-#define			AT91_SDRAMC_NB_2	(0 << 4)
-#define			AT91_SDRAMC_NB_4	(1 << 4)
-#define		AT91_SDRAMC_CAS		(3   <<  5)		/* CAS Latency */
-#define			AT91_SDRAMC_CAS_2	(2 << 5)
-#define		AT91_SDRAMC_TWR		(0xf <<  7)		/* Write Recovery Delay */
-#define		AT91_SDRAMC_TRC		(0xf << 11)		/* Row Cycle Delay */
-#define		AT91_SDRAMC_TRP		(0xf << 15)		/* Row Precharge Delay */
-#define		AT91_SDRAMC_TRCD	(0xf << 19)		/* Row to Column Delay */
-#define		AT91_SDRAMC_TRAS	(0xf << 23)		/* Active to Precharge Delay */
-#define		AT91_SDRAMC_TXSR	(0xf << 27)		/* Exit Self Refresh to Active Delay */
-
-#define AT91_SDRAMC_SRR		(AT91_MC + 0x9c)	/* Self Refresh Register */
-#define AT91_SDRAMC_LPR		(AT91_MC + 0xa0)	/* Low Power Register */
-#define AT91_SDRAMC_IER		(AT91_MC + 0xa4)	/* Interrupt Enable Register */
-#define AT91_SDRAMC_IDR		(AT91_MC + 0xa8)	/* Interrupt Disable Register */
-#define AT91_SDRAMC_IMR		(AT91_MC + 0xac)	/* Interrupt Mask Register */
-#define AT91_SDRAMC_ISR		(AT91_MC + 0xb0)	/* Interrupt Status Register */
-
-/* Burst Flash Controller register */
-#define AT91_BFC_MR		(AT91_MC + 0xc0)	/* Mode Register */
-#define		AT91_BFC_BFCOM		(3   <<  0)		/* Burst Flash Controller Operating Mode */
-#define			AT91_BFC_BFCOM_DISABLED	(0 << 0)
-#define			AT91_BFC_BFCOM_ASYNC	(1 << 0)
-#define			AT91_BFC_BFCOM_BURST	(2 << 0)
-#define		AT91_BFC_BFCC		(3   <<  2)		/* Burst Flash Controller Clock */
-#define			AT91_BFC_BFCC_MCK	(1 << 2)
-#define			AT91_BFC_BFCC_DIV2	(2 << 2)
-#define			AT91_BFC_BFCC_DIV4	(3 << 2)
-#define		AT91_BFC_AVL		(0xf <<  4)		/* Address Valid Latency */
-#define		AT91_BFC_PAGES		(7   <<  8)		/* Page Size */
-#define			AT91_BFC_PAGES_NO_PAGE	(0 << 8)
-#define			AT91_BFC_PAGES_16	(1 << 8)
-#define			AT91_BFC_PAGES_32	(2 << 8)
-#define			AT91_BFC_PAGES_64	(3 << 8)
-#define			AT91_BFC_PAGES_128	(4 << 8)
-#define			AT91_BFC_PAGES_256	(5 << 8)
-#define			AT91_BFC_PAGES_512	(6 << 8)
-#define			AT91_BFC_PAGES_1024	(7 << 8)
-#define		AT91_BFC_OEL		(3   << 12)		/* Output Enable Latency */
-#define		AT91_BFC_BAAEN		(1   << 16)		/* Burst Address Advance Enable */
-#define		AT91_BFC_BFOEH		(1   << 17)		/* Burst Flash Output Enable Handling */
-#define		AT91_BFC_MUXEN		(1   << 18)		/* Multiplexed Bus Enable */
-#define		AT91_BFC_RDYEN		(1   << 19)		/* Ready Enable Mode */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91sam9260.h b/include/asm-arm/arch-at91rm9200/at91sam9260.h
deleted file mode 100644
index 46f4dd6..0000000
--- a/include/asm-arm/arch-at91rm9200/at91sam9260.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91sam9260.h
- *
- * (C) 2006 Andrew Victor
- *
- * Common definitions.
- * Based on AT91SAM9260 datasheet revision A (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9260_H
-#define AT91SAM9260_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripherals */
-#define AT91SAM9260_ID_PIOA	2	/* Parallel IO Controller A */
-#define AT91SAM9260_ID_PIOB	3	/* Parallel IO Controller B */
-#define AT91SAM9260_ID_PIOC	4	/* Parallel IO Controller C */
-#define AT91SAM9260_ID_ADC	5	/* Analog-to-Digital Converter */
-#define AT91SAM9260_ID_US0	6	/* USART 0 */
-#define AT91SAM9260_ID_US1	7	/* USART 1 */
-#define AT91SAM9260_ID_US2	8	/* USART 2 */
-#define AT91SAM9260_ID_MCI	9	/* Multimedia Card Interface */
-#define AT91SAM9260_ID_UDP	10	/* USB Device Port */
-#define AT91SAM9260_ID_TWI	11	/* Two-Wire Interface */
-#define AT91SAM9260_ID_SPI0	12	/* Serial Peripheral Interface 0 */
-#define AT91SAM9260_ID_SPI1	13	/* Serial Peripheral Interface 1 */
-#define AT91SAM9260_ID_SSC	14	/* Serial Synchronous Controller */
-#define AT91SAM9260_ID_TC0	17	/* Timer Counter 0 */
-#define AT91SAM9260_ID_TC1	18	/* Timer Counter 1 */
-#define AT91SAM9260_ID_TC2	19	/* Timer Counter 2 */
-#define AT91SAM9260_ID_UHP	20	/* USB Host port */
-#define AT91SAM9260_ID_EMAC	21	/* Ethernet */
-#define AT91SAM9260_ID_ISI	22	/* Image Sensor Interface */
-#define AT91SAM9260_ID_US3	23	/* USART 3 */
-#define AT91SAM9260_ID_US4	24	/* USART 4 */
-#define AT91SAM9260_ID_US5	25	/* USART 5 */
-#define AT91SAM9260_ID_TC3	26	/* Timer Counter 3 */
-#define AT91SAM9260_ID_TC4	27	/* Timer Counter 4 */
-#define AT91SAM9260_ID_TC5	28	/* Timer Counter 5 */
-#define AT91SAM9260_ID_IRQ0	29	/* Advanced Interrupt Controller (IRQ0) */
-#define AT91SAM9260_ID_IRQ1	30	/* Advanced Interrupt Controller (IRQ1) */
-#define AT91SAM9260_ID_IRQ2	31	/* Advanced Interrupt Controller (IRQ2) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9260_BASE_TCB0		0xfffa0000
-#define AT91SAM9260_BASE_TC0		0xfffa0000
-#define AT91SAM9260_BASE_TC1		0xfffa0040
-#define AT91SAM9260_BASE_TC2		0xfffa0080
-#define AT91SAM9260_BASE_UDP		0xfffa4000
-#define AT91SAM9260_BASE_MCI		0xfffa8000
-#define AT91SAM9260_BASE_TWI		0xfffac000
-#define AT91SAM9260_BASE_US0		0xfffb0000
-#define AT91SAM9260_BASE_US1		0xfffb4000
-#define AT91SAM9260_BASE_US2		0xfffb8000
-#define AT91SAM9260_BASE_SSC		0xfffbc000
-#define AT91SAM9260_BASE_ISI		0xfffc0000
-#define AT91SAM9260_BASE_EMAC		0xfffc4000
-#define AT91SAM9260_BASE_SPI0		0xfffc8000
-#define AT91SAM9260_BASE_SPI1		0xfffcc000
-#define AT91SAM9260_BASE_US3		0xfffd0000
-#define AT91SAM9260_BASE_US4		0xfffd4000
-#define AT91SAM9260_BASE_US5		0xfffd8000
-#define AT91SAM9260_BASE_TCB1		0xfffdc000
-#define AT91SAM9260_BASE_TC3		0xfffdc000
-#define AT91SAM9260_BASE_TC4		0xfffdc040
-#define AT91SAM9260_BASE_TC5		0xfffdc080
-#define AT91SAM9260_BASE_ADC		0xfffe0000
-#define AT91_BASE_SYS			0xffffe800
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_ECC	(0xffffe800 - AT91_BASE_SYS)
-#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
-#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
-#define AT91_CCFG	(0xffffef10 - AT91_BASE_SYS)
-#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
-#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
-
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9260_ROM_BASE	0x00100000	/* Internal ROM base address */
-#define AT91SAM9260_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
-
-#define AT91SAM9260_SRAM0_BASE	0x00200000	/* Internal SRAM 0 base address */
-#define AT91SAM9260_SRAM0_SIZE	SZ_4K		/* Internal SRAM 0 size (4Kb) */
-#define AT91SAM9260_SRAM1_BASE	0x00300000	/* Internal SRAM 1 base address */
-#define AT91SAM9260_SRAM1_SIZE	SZ_4K		/* Internal SRAM 1 size (4Kb) */
-
-#define AT91SAM9260_UHP_BASE	0x00500000	/* USB Host controller */
-
-#if 0
-/*
- * PIO pin definitions (peripheral A/B multiplexing).
- */
-
-// TODO: Add
-
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h b/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h
deleted file mode 100644
index 78f6b49..0000000
--- a/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9260 datasheet revision B.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9260_MATRIX_H
-#define AT91SAM9260_MATRIX_H
-
-#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x04)	/* Master Configuration Register 5 */
-#define		AT91_MATRIX_ULBT		(7 << 0)	/* Undefined Length Burst Type */
-#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
-#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
-#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
-#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
-#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
-
-#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff <<  0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
-#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
-#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
-#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
-
-#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
-#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
-#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
-#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
-#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
-#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
-#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
-
-#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
-#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-
-#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x11C)	/* EBI Chip Select Assignment Register */
-#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
-#define		AT91_MATRIX_CS5A		(1 << 5 )	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
-#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define		AT91_MATRIX_VDDIOMSEL		(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_VDDIOMSEL_1_8V	(0 << 16)
-#define			AT91_MATRIX_VDDIOMSEL_3_3V	(1 << 16)
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91sam9261.h b/include/asm-arm/arch-at91rm9200/at91sam9261.h
deleted file mode 100644
index 8d39672..0000000
--- a/include/asm-arm/arch-at91rm9200/at91sam9261.h
+++ /dev/null
@@ -1,292 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91sam9261.h
- *
- * Copyright (C) SAN People
- *
- * Common definitions.
- * Based on AT91SAM9261 datasheet revision E. (Preliminary)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9261_H
-#define AT91SAM9261_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripherals */
-#define AT91SAM9261_ID_PIOA	2	/* Parallel IO Controller A */
-#define AT91SAM9261_ID_PIOB	3	/* Parallel IO Controller B */
-#define AT91SAM9261_ID_PIOC	4	/* Parallel IO Controller C */
-#define AT91SAM9261_ID_US0	6	/* USART 0 */
-#define AT91SAM9261_ID_US1	7	/* USART 1 */
-#define AT91SAM9261_ID_US2	8	/* USART 2 */
-#define AT91SAM9261_ID_MCI	9	/* Multimedia Card Interface */
-#define AT91SAM9261_ID_UDP	10	/* USB Device Port */
-#define AT91SAM9261_ID_TWI	11	/* Two-Wire Interface */
-#define AT91SAM9261_ID_SPI0	12	/* Serial Peripheral Interface 0 */
-#define AT91SAM9261_ID_SPI1	13	/* Serial Peripheral Interface 1 */
-#define AT91SAM9261_ID_SSC0	14	/* Serial Synchronous Controller 0 */
-#define AT91SAM9261_ID_SSC1	15	/* Serial Synchronous Controller 1 */
-#define AT91SAM9261_ID_SSC2	16	/* Serial Synchronous Controller 2 */
-#define AT91SAM9261_ID_TC0	17	/* Timer Counter 0 */
-#define AT91SAM9261_ID_TC1	18	/* Timer Counter 1 */
-#define AT91SAM9261_ID_TC2	19	/* Timer Counter 2 */
-#define AT91SAM9261_ID_UHP	20	/* USB Host port */
-#define AT91SAM9261_ID_LCDC	21	/* LDC Controller */
-#define AT91SAM9261_ID_IRQ0	29	/* Advanced Interrupt Controller (IRQ0) */
-#define AT91SAM9261_ID_IRQ1	30	/* Advanced Interrupt Controller (IRQ1) */
-#define AT91SAM9261_ID_IRQ2	31	/* Advanced Interrupt Controller (IRQ2) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9261_BASE_TCB0		0xfffa0000
-#define AT91SAM9261_BASE_TC0		0xfffa0000
-#define AT91SAM9261_BASE_TC1		0xfffa0040
-#define AT91SAM9261_BASE_TC2		0xfffa0080
-#define AT91SAM9261_BASE_UDP		0xfffa4000
-#define AT91SAM9261_BASE_MCI		0xfffa8000
-#define AT91SAM9261_BASE_TWI		0xfffac000
-#define AT91SAM9261_BASE_US0		0xfffb0000
-#define AT91SAM9261_BASE_US1		0xfffb4000
-#define AT91SAM9261_BASE_US2		0xfffb8000
-#define AT91SAM9261_BASE_SSC0		0xfffbc000
-#define AT91SAM9261_BASE_SSC1		0xfffc0000
-#define AT91SAM9261_BASE_SSC2		0xfffc4000
-#define AT91SAM9261_BASE_SPI0		0xfffc8000
-#define AT91SAM9261_BASE_SPI1		0xfffcc000
-#define AT91_BASE_SYS			0xffffea00
-
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
-#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
-#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
-
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9261_SRAM_BASE	0x00300000	/* Internal SRAM base address */
-#define AT91SAM9261_SRAM_SIZE	0x00028000	/* Internal SRAM size (160Kb) */
-
-#define AT91SAM9261_ROM_BASE	0x00400000	/* Internal ROM base address */
-#define AT91SAM9261_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
-
-#define AT91SAM9261_UHP_BASE	0x00500000	/* USB Host controller */
-#define AT91SAM9261_LCDC_BASE	0x00600000	/* LDC controller */
-
-
-#if 0
-/*
- * PIO pin definitions (peripheral A/B multiplexing).
- */
-#define AT91_PA0_SPI0_MISO	(1 <<  0)	/* A: SPI0 Master In Slave */
-#define AT91_PA0_MCDA0		(1 <<  0)	/* B: Multimedia Card A Data 0 */
-#define AT91_PA1_SPI0_MOSI	(1 <<  1)	/* A: SPI0 Master Out Slave */
-#define AT91_PA1_MCCDA		(1 <<  1)	/* B: Multimedia Card A Command */
-#define AT91_PA2_SPI0_SPCK	(1 <<  2)	/* A: SPI0 Serial Clock */
-#define AT91_PA2_MCCK		(1 <<  2)	/* B: Multimedia Card Clock */
-#define AT91_PA3_SPI0_NPCS0	(1 <<  3)	/* A: SPI0 Peripheral Chip Select 0 */
-#define AT91_PA4_SPI0_NPCS1	(1 <<  4)	/* A: SPI0 Peripheral Chip Select 1 */
-#define AT91_PA4_MCDA1		(1 <<  4)	/* B: Multimedia Card A Data 1 */
-#define AT91_PA5_SPI0_NPCS2	(1 <<  5)	/* A: SPI0 Peripheral Chip Select 2 */
-#define AT91_PA5_MCDA2		(1 <<  5)	/* B: Multimedia Card A Data 2 */
-#define AT91_PA6_SPI0_NPCS3	(1 <<  6)	/* A: SPI0 Peripheral Chip Select 3 */
-#define AT91_PA6_MCDA3		(1 <<  6)	/* B: Multimedia Card A Data 3 */
-#define AT91_PA7_TWD		(1 <<  7)	/* A: TWI Two-wire Serial Data */
-#define AT91_PA7_PCK0		(1 <<  7)	/* B: PMC Programmable clock Output 0 */
-#define AT91_PA8_TWCK		(1 <<  8)	/* A: TWI Two-wire Serial Clock */
-#define AT91_PA8_PCK1		(1 <<  8)	/* B: PMC Programmable clock Output 1 */
-#define AT91_PA9_DRXD		(1 <<  9)	/* A: DBGU Debug Receive Data */
-#define AT91_PA9_PCK2		(1 <<  9)	/* B: PMC Programmable clock Output 2 */
-#define AT91_PA10_DTXD		(1 << 10)	/* A: DBGU Debug Transmit Data */
-#define AT91_PA10_PCK3		(1 << 10)	/* B: PMC Programmable clock Output 3 */
-#define AT91_PA11_TSYNC		(1 << 11)	/* A: Trace Synchronization Signal */
-#define AT91_PA11_SCK1		(1 << 11)	/* B: USART1 Serial Clock */
-#define AT91_PA12_TCLK		(1 << 12)	/* A: Trace Clock */
-#define AT91_PA12_RTS1		(1 << 12)	/* B: USART1 Ready To Send */
-#define AT91_PA13_TPS0		(1 << 13)	/* A: Trace ARM Pipeline Status 0 */
-#define AT91_PA13_CTS1		(1 << 13)	/* B: USART1 Clear To Send */
-#define AT91_PA14_TPS1		(1 << 14)	/* A: Trace ARM Pipeline Status 1 */
-#define AT91_PA14_SCK2		(1 << 14)	/* B: USART2 Serial Clock */
-#define AT91_PA15_TPS2		(1 << 15)	/* A: Trace ARM Pipeline Status 2 */
-#define AT91_PA15_RTS2		(1 << 15)	/* B: USART2 Ready To Send */
-#define AT91_PA16_TPK0		(1 << 16)	/* A: Trace Packet Port 0 */
-#define AT91_PA16_CTS2		(1 << 16)	/* B: USART2 Clear To Send */
-#define AT91_PA17_TPK1		(1 << 17)	/* A: Trace Packet Port 1 */
-#define AT91_PA17_TF1		(1 << 17)	/* B: SSC1 Transmit Frame Sync */
-#define AT91_PA18_TPK2		(1 << 18)	/* A: Trace Packet Port 2 */
-#define AT91_PA18_TK1		(1 << 18)	/* B: SSC1 Transmit Clock */
-#define AT91_PA19_TPK3		(1 << 19)	/* A: Trace Packet Port 3 */
-#define AT91_PA19_TD1		(1 << 19)	/* B: SSC1 Transmit Data */
-#define AT91_PA20_TPK4		(1 << 20)	/* A: Trace Packet Port 4 */
-#define AT91_PA20_RD1		(1 << 20)	/* B: SSC1 Receive Data */
-#define AT91_PA21_TPK5		(1 << 21)	/* A: Trace Packet Port 5 */
-#define AT91_PA21_RK1		(1 << 21)	/* B: SSC1 Receive Clock */
-#define AT91_PA22_TPK6		(1 << 22)	/* A: Trace Packet Port 6 */
-#define AT91_PA22_RF1		(1 << 22)	/* B: SSC1 Receive Frame Sync */
-#define AT91_PA23_TPK7		(1 << 23)	/* A: Trace Packet Port 7 */
-#define AT91_PA23_RTS0		(1 << 23)	/* B: USART0 Ready To Send */
-#define AT91_PA24_TPK8		(1 << 24)	/* A: Trace Packet Port 8 */
-#define AT91_PA24_SPI1_NPCS1	(1 << 24)	/* B: SPI1 Peripheral Chip Select 1 */
-#define AT91_PA25_TPK9		(1 << 25)	/* A: Trace Packet Port 9 */
-#define AT91_PA25_SPI1_NPCS2	(1 << 25)	/* B: SPI1 Peripheral Chip Select 2 */
-#define AT91_PA26_TPK10		(1 << 26)	/* A: Trace Packet Port 10 */
-#define AT91_PA26_SPI1_NPCS3	(1 << 26)	/* B: SPI1 Peripheral Chip Select 3 */
-#define AT91_PA27_TPK11		(1 << 27)	/* A: Trace Packet Port 11 */
-#define AT91_PA27_SPI0_NPCS1	(1 << 27)	/* B: SPI0 Peripheral Chip Select 1 */
-#define AT91_PA28_TPK12		(1 << 28)	/* A: Trace Packet Port 12 */
-#define AT91_PA28_SPI0_NPCS2	(1 << 28)	/* B: SPI0 Peripheral Chip Select 2 */
-#define AT91_PA29_TPK13		(1 << 29)	/* A: Trace Packet Port 13 */
-#define AT91_PA29_SPI0_NPCS3	(1 << 29)	/* B: SPI0 Peripheral Chip Select 3 */
-#define AT91_PA30_TPK14		(1 << 30)	/* A: Trace Packet Port 14 */
-#define AT91_PA30_A23		(1 << 30)	/* B: Address Bus bit 23 */
-#define AT91_PA31_TPK15		(1 << 31)	/* A: Trace Packet Port 15 */
-#define AT91_PA31_A24		(1 << 31)	/* B: Address Bus bit 24 */
-
-#define AT91_PB0_LCDVSYNC	(1 <<  0)	/* A: LCD Vertical Synchronization */
-#define AT91_PB1_LCDHSYNC	(1 <<  1)	/* A: LCD Horizontal Synchronization */
-#define AT91_PB2_LCDDOTCK	(1 <<  2)	/* A: LCD Dot Clock */
-#define AT91_PB2_PCK0		(1 <<  2)	/* B: PMC Programmable clock Output 0 */
-#define AT91_PB3_LCDDEN		(1 <<  3)	/* A: LCD Data Enable */
-#define AT91_PB4_LCDCC		(1 <<  4)	/* A: LCD Contrast Control */
-#define AT91_PB4_LCDD2		(1 <<  4)	/* B: LCD Data Bus Bit 2 */
-#define AT91_PB5_LCDD0		(1 <<  5)	/* A: LCD Data Bus Bit 0 */
-#define AT91_PB5_LCDD3		(1 <<  5)	/* B: LCD Data Bus Bit 3 */
-#define AT91_PB6_LCDD1		(1 <<  6)	/* A: LCD Data Bus Bit 1 */
-#define AT91_PB6_LCDD4		(1 <<  6)	/* B: LCD Data Bus Bit 4 */
-#define AT91_PB7_LCDD2		(1 <<  7)	/* A: LCD Data Bus Bit 2 */
-#define AT91_PB7_LCDD5		(1 <<  7)	/* B: LCD Data Bus Bit 5 */
-#define AT91_PB8_LCDD3		(1 <<  8)	/* A: LCD Data Bus Bit 3 */
-#define AT91_PB8_LCDD6		(1 <<  8)	/* B: LCD Data Bus Bit 6 */
-#define AT91_PB9_LCDD4		(1 <<  9)	/* A: LCD Data Bus Bit 4 */
-#define AT91_PB9_LCDD7		(1 <<  9)	/* B: LCD Data Bus Bit 7 */
-#define AT91_PB10_LCDD5		(1 << 10)	/* A: LCD Data Bus Bit 5 */
-#define AT91_PB10_LCDD10	(1 << 10)	/* B: LCD Data Bus Bit 10 */
-#define AT91_PB11_LCDD6		(1 << 11)	/* A: LCD Data Bus Bit 6 */
-#define AT91_PB11_LCDD11	(1 << 11)	/* B: LCD Data Bus Bit 11 */
-#define AT91_PB12_LCDD7		(1 << 12)	/* A: LCD Data Bus Bit 7 */
-#define AT91_PB12_LCDD12	(1 << 12)	/* B: LCD Data Bus Bit 12 */
-#define AT91_PB13_LCDD8		(1 << 13)	/* A: LCD Data Bus Bit 8 */
-#define AT91_PB13_LCDD13	(1 << 13)	/* B: LCD Data Bus Bit 13 */
-#define AT91_PB14_LCDD9		(1 << 14)	/* A: LCD Data Bus Bit 9 */
-#define AT91_PB14_LCDD14	(1 << 14)	/* B: LCD Data Bus Bit 14 */
-#define AT91_PB15_LCDD10	(1 << 15)	/* A: LCD Data Bus Bit 10 */
-#define AT91_PB15_LCDD15	(1 << 15)	/* B: LCD Data Bus Bit 15 */
-#define AT91_PB16_LCDD11	(1 << 16)	/* A: LCD Data Bus Bit 11 */
-#define AT91_PB16_LCDD19	(1 << 16)	/* B: LCD Data Bus Bit 19 */
-#define AT91_PB17_LCDD12	(1 << 17)	/* A: LCD Data Bus Bit 12 */
-#define AT91_PB17_LCDD20	(1 << 17)	/* B: LCD Data Bus Bit 20 */
-#define AT91_PB18_LCDD13	(1 << 18)	/* A: LCD Data Bus Bit 13 */
-#define AT91_PB18_LCDD21	(1 << 18)	/* B: LCD Data Bus Bit 21 */
-#define AT91_PB19_LCDD14	(1 << 19)	/* A: LCD Data Bus Bit 14 */
-#define AT91_PB19_LCDD22	(1 << 19)	/* B: LCD Data Bus Bit 22 */
-#define AT91_PB20_LCDD15	(1 << 20)	/* A: LCD Data Bus Bit 15 */
-#define AT91_PB20_LCDD23	(1 << 20)	/* B: LCD Data Bus Bit 23 */
-#define AT91_PB21_TF0		(1 << 21)	/* A: SSC0 Transmit Frame Sync */
-#define AT91_PB21_LCDD16	(1 << 21)	/* B: LCD Data Bus Bit 16 */
-#define AT91_PB22_TK0		(1 << 22)	/* A: SSC0 Transmit Clock */
-#define AT91_PB22_LCDD17	(1 << 22)	/* B: LCD Data Bus Bit 17 */
-#define AT91_PB23_TD0		(1 << 23)	/* A: SSC0 Transmit Data */
-#define AT91_PB23_LCDD18	(1 << 23)	/* B: LCD Data Bus Bit 18 */
-#define AT91_PB24_RD0		(1 << 24)	/* A: SSC0 Receive Data */
-#define AT91_PB24_LCDD19	(1 << 24)	/* B: LCD Data Bus Bit 19 */
-#define AT91_PB25_RK0		(1 << 25)	/* A: SSC0 Receive Clock */
-#define AT91_PB25_LCDD20	(1 << 25)	/* B: LCD Data Bus Bit 20 */
-#define AT91_PB26_RF0		(1 << 26)	/* A: SSC0 Receive Frame Sync */
-#define AT91_PB26_LCDD21	(1 << 26)	/* B: LCD Data Bus Bit 21 */
-#define AT91_PB27_SPI1_NPCS1	(1 << 27)	/* A: SPI1 Peripheral Chip Select 1 */
-#define AT91_PB27_LCDD22	(1 << 27)	/* B: LCD Data Bus Bit 22 */
-#define AT91_PB28_SPI1_NPCS0	(1 << 28)	/* A: SPI1 Peripheral Chip Select 0 */
-#define AT91_PB28_LCDD23	(1 << 28)	/* B: LCD Data Bus Bit 23 */
-#define AT91_PB29_SPI1_SPCK	(1 << 29)	/* A: SPI1 Serial Clock */
-#define AT91_PB29_IRQ2		(1 << 29)	/* B: Interrupt input 2 */
-#define AT91_PB30_SPI1_MISO	(1 << 30)	/* A: SPI1 Master In Slave */
-#define AT91_PB30_IRQ1		(1 << 30)	/* B: Interrupt input 1 */
-#define AT91_PB31_SPI1_MOSI	(1 << 31)	/* A: SPI1 Master Out Slave */
-#define AT91_PB31_PCK2		(1 << 31)	/* B: PMC Programmable clock Output 2 */
-
-#define AT91_PC0_SMOE		(1 << 0)	/* A: SmartMedia Output Enable */
-#define AT91_PC0_NCS6		(1 << 0)	/* B: Chip Select 6 */
-#define AT91_PC1_SMWE		(1 << 1)	/* A: SmartMedia Write Enable */
-#define AT91_PC1_NCS7		(1 << 1)	/* B: Chip Select 7 */
-#define AT91_PC2_NWAIT		(1 << 2)	/* A: NWAIT */
-#define AT91_PC2_IRQ0		(1 << 2)	/* B: Interrupt input 0 */
-#define AT91_PC3_A25_CFRNW	(1 << 3)	/* A: Address Bus[25] / Compact Flash Read Not Write */
-#define AT91_PC4_NCS4_CFCS0	(1 << 4)	/* A: Chip Select 4 / CompactFlash Chip Select 0 */
-#define AT91_PC5_NCS5_CFCS1	(1 << 5)	/* A: Chip Select 5 / CompactFlash Chip Select 1 */
-#define AT91_PC6_CFCE1		(1 << 6)	/* A: CompactFlash Chip Enable 1 */
-#define AT91_PC7_CFCE2		(1 << 7)	/* A: CompactFlash Chip Enable 2 */
-#define AT91_PC8_TXD0		(1 << 8)	/* A: USART0 Transmit Data */
-#define AT91_PC8_PCK2		(1 << 8)	/* B: PMC Programmable clock Output 2 */
-#define AT91_PC9_RXD0		(1 << 9)	/* A: USART0 Receive Data */
-#define AT91_PC9_PCK3		(1 << 9)	/* B: PMC Programmable clock Output 3 */
-#define AT91_PC10_RTS0		(1 << 10)	/* A: USART0 Ready To Send */
-#define AT91_PC10_SCK0		(1 << 10)	/* B: USART0 Serial Clock */
-#define AT91_PC11_CTS0		(1 << 11)	/* A: USART0 Clear To Send */
-#define AT91_PC11_FIQ		(1 << 11)	/* B: AIC Fast Interrupt Input */
-#define AT91_PC12_TXD1		(1 << 12)	/* A: USART1 Transmit Data */
-#define AT91_PC12_NCS6		(1 << 12)	/* B: Chip Select 6 */
-#define AT91_PC13_RXD1		(1 << 13)	/* A: USART1 Receive Data */
-#define AT91_PC13_NCS7		(1 << 13)	/* B: Chip Select 7 */
-#define AT91_PC14_TXD2		(1 << 14)	/* A: USART2 Transmit Data */
-#define AT91_PC14_SPI1_NPCS2	(1 << 14)	/* B: SPI1 Peripheral Chip Select 2 */
-#define AT91_PC15_RXD2		(1 << 15)	/* A: USART2 Receive Data */
-#define AT91_PC15_SPI1_NPCS3	(1 << 15)	/* B: SPI1 Peripheral Chip Select 3 */
-#define AT91_PC16_D16		(1 << 16)	/* A: Data Bus [16] */
-#define AT91_PC16_TCLK0		(1 << 16)	/* B: Timer Counter 0 external clock input */
-#define AT91_PC17_D17		(1 << 17)	/* A: Data Bus [17] */
-#define AT91_PC17_TCLK1		(1 << 17)	/* B: Timer Counter 1 external clock input */
-#define AT91_PC18_D18		(1 << 18)	/* A: Data Bus [18] */
-#define AT91_PC18_TCLK2		(1 << 18)	/* B: Timer Counter 2 external clock input */
-#define AT91_PC19_D19		(1 << 19)	/* A: Data Bus [19] */
-#define AT91_PC19_TIOA0		(1 << 19)	/* B: Timer Counter 0 Multipurpose Timer I/O Pin A */
-#define AT91_PC20_D20		(1 << 20)	/* A: Data Bus [20] */
-#define AT91_PC20_TIOB0		(1 << 20)	/* B: Timer Counter 0 Multipurpose Timer I/O Pin B */
-#define AT91_PC21_D21		(1 << 21)	/* A: Data Bus [21] */
-#define AT91_PC21_TIOA1		(1 << 21)	/* B: Timer Counter 1 Multipurpose Timer I/O Pin A */
-#define AT91_PC22_D22		(1 << 22)	/* A: Data Bus [22] */
-#define AT91_PC22_TIOB1		(1 << 22)	/* B: Timer Counter 1 Multipurpose Timer I/O Pin B */
-#define AT91_PC23_D23		(1 << 23)	/* A: Data Bus [23] */
-#define AT91_PC23_TIOA2		(1 << 23)	/* B: Timer Counter 2 Multipurpose Timer I/O Pin A */
-#define AT91_PC24_D24		(1 << 24)	/* A: Data Bus [24] */
-#define AT91_PC24_TIOB2		(1 << 24)	/* B: Timer Counter 2 Multipurpose Timer I/O Pin B */
-#define AT91_PC25_D25		(1 << 25)	/* A: Data Bus [25] */
-#define AT91_PC25_TF2		(1 << 25)	/* B: SSC2 Transmit Frame Sync */
-#define AT91_PC26_D26		(1 << 26)	/* A: Data Bus [26] */
-#define AT91_PC26_TK2		(1 << 26)	/* B: SSC2 Transmit Clock */
-#define AT91_PC27_D27		(1 << 27)	/* A: Data Bus [27] */
-#define AT91_PC27_TD2		(1 << 27)	/* B: SSC2 Transmit Data */
-#define AT91_PC28_D28		(1 << 28)	/* A: Data Bus [28] */
-#define AT91_PC28_RD2		(1 << 28)	/* B: SSC2 Receive Data */
-#define AT91_PC29_D29		(1 << 29)	/* A: Data Bus [29] */
-#define AT91_PC29_RK2		(1 << 29)	/* B: SSC2 Receive Clock */
-#define AT91_PC30_D30		(1 << 30)	/* A: Data Bus [30] */
-#define AT91_PC30_RF2		(1 << 30)	/* B: SSC2 Receive Frame Sync */
-#define AT91_PC31_D31		(1 << 31)	/* A: Data Bus [31] */
-#define AT91_PC31_PCK1		(1 << 31)	/* B: PMC Programmable clock Output 1 */
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h b/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h
deleted file mode 100644
index ec88efa..0000000
--- a/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9261_MATRIX_H
-#define AT91SAM9261_MATRIX_H
-
-#define AT91_MATRIX_MCFG	(AT91_MATRIX + 0x00)	/* Master Configuration Register */
-#define		AT91_MATRIX_RCB0	(1 << 0)		/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1	(1 << 1)		/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-
-#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x04)	/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x08)	/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x0C)	/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x10)	/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x14)	/* Slave Configuration Register 4 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
-
-#define AT91_MATRIX_TCR		(AT91_MATRIX + 0x24)	/* TCM Configuration Register */
-#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
-#define			AT91_MATRIX_ITCM_0		(0 << 0)
-#define			AT91_MATRIX_ITCM_16		(5 << 0)
-#define			AT91_MATRIX_ITCM_32		(6 << 0)
-#define			AT91_MATRIX_ITCM_64		(7 << 0)
-#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
-#define			AT91_MATRIX_DTCM_0		(0 << 4)
-#define			AT91_MATRIX_DTCM_16		(5 << 4)
-#define			AT91_MATRIX_DTCM_32		(6 << 4)
-#define			AT91_MATRIX_DTCM_64		(7 << 4)
-
-#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x30)	/* EBI Chip Select Assignment Register */
-#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
-#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
-#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-
-#define AT91_MATRIX_USBPUCR	(AT91_MATRIX + 0x34)	/* USB Pad Pull-Up Control Register */
-#define		AT91_MATRIX_USBPUCR_PUON	(1 << 30)	/* USB Device PAD Pull-up Enable */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h b/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
deleted file mode 100644
index 972e753..0000000
--- a/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
- *
- * Memory Controllers (SMC, SDRAMC) - System peripherals registers.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM926x_MC_H
-#define AT91SAM926x_MC_H
-
-/* SDRAM Controller (SDRAMC) registers */
-#define AT91_SDRAMC_MR		(AT91_SDRAMC + 0x00)	/* SDRAM Controller Mode Register */
-#define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
-#define			AT91_SDRAMC_MODE_NORMAL		0
-#define			AT91_SDRAMC_MODE_NOP		1
-#define			AT91_SDRAMC_MODE_PRECHARGE	2
-#define			AT91_SDRAMC_MODE_LMR		3
-#define			AT91_SDRAMC_MODE_REFRESH	4
-#define			AT91_SDRAMC_MODE_EXT_LMR	5
-#define			AT91_SDRAMC_MODE_DEEP		6
-
-#define AT91_SDRAMC_TR		(AT91_SDRAMC + 0x04)	/* SDRAM Controller Refresh Timer Register */
-#define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
-
-#define AT91_SDRAMC_CR		(AT91_SDRAMC + 0x08)	/* SDRAM Controller Configuration Register */
-#define		AT91_SDRAMC_NC		(3 << 0)		/* Number of Column Bits */
-#define			AT91_SDRAMC_NC_8	(0 << 0)
-#define			AT91_SDRAMC_NC_9	(1 << 0)
-#define			AT91_SDRAMC_NC_10	(2 << 0)
-#define			AT91_SDRAMC_NC_11	(3 << 0)
-#define		AT91_SDRAMC_NR		(3 << 2)		/* Number of Row Bits */
-#define			AT91_SDRAMC_NR_11	(0 << 2)
-#define			AT91_SDRAMC_NR_12	(1 << 2)
-#define			AT91_SDRAMC_NR_13	(2 << 2)
-#define		AT91_SDRAMC_NB		(1 << 4)		/* Number of Banks */
-#define			AT91_SDRAMC_NB_2	(0 << 4)
-#define			AT91_SDRAMC_NB_4	(1 << 4)
-#define		AT91_SDRAMC_CAS		(3 << 5)		/* CAS Latency */
-#define			AT91_SDRAMC_CAS_1	(1 << 5)
-#define			AT91_SDRAMC_CAS_2	(2 << 5)
-#define			AT91_SDRAMC_CAS_3	(3 << 5)
-#define		AT91_SDRAMC_DBW		(1 << 7)		/* Data Bus Width */
-#define			AT91_SDRAMC_DBW_32	(0 << 7)
-#define			AT91_SDRAMC_DBW_16	(1 << 7)
-#define		AT91_SDRAMC_TWR		(0xf <<  8)		/* Write Recovery Delay */
-#define		AT91_SDRAMC_TRC		(0xf << 12)		/* Row Cycle Delay */
-#define		AT91_SDRAMC_TRP		(0xf << 16)		/* Row Precharge Delay */
-#define		AT91_SDRAMC_TRCD	(0xf << 20)		/* Row to Column Delay */
-#define		AT91_SDRAMC_TRAS	(0xf << 24)		/* Active to Precharge Delay */
-#define		AT91_SDRAMC_TXSR	(0xf << 28)		/* Exit Self Refresh to Active Delay */
-
-#define AT91_SDRAMC_LPR		(AT91_SDRAMC + 0x10)	/* SDRAM Controller Low Power Register */
-#define		AT91_SDRAMC_LPCB		(3 << 0)	/* Low-power Configurations */
-#define			AT91_SDRAMC_LPCB_DISABLE		0
-#define			AT91_SDRAMC_LPCB_SELF_REFRESH		1
-#define			AT91_SDRAMC_LPCB_POWER_DOWN		2
-#define			AT91_SDRAMC_LPCB_DEEP_POWER_DOWN	3
-#define		AT91_SDRAMC_PASR		(7 << 4)	/* Partial Array Self Refresh */
-#define		AT91_SDRAMC_TCSR		(3 << 8)	/* Temperature Compensated Self Refresh */
-#define		AT91_SDRAMC_DS			(3 << 10)	/* Drive Strenght */
-#define		AT91_SDRAMC_TIMEOUT		(3 << 12)	/* Time to define when Low Power Mode is enabled */
-#define			AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
-#define			AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
-#define			AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
-
-#define AT91_SDRAMC_IER		(AT91_SDRAMC + 0x14)	/* SDRAM Controller Interrupt Enable Register */
-#define AT91_SDRAMC_IDR		(AT91_SDRAMC + 0x18)	/* SDRAM Controller Interrupt Disable Register */
-#define AT91_SDRAMC_IMR		(AT91_SDRAMC + 0x1C)	/* SDRAM Controller Interrupt Mask Register */
-#define AT91_SDRAMC_ISR		(AT91_SDRAMC + 0x20)	/* SDRAM Controller Interrupt Status Register */
-#define		AT91_SDRAMC_RES		(1 << 0)		/* Refresh Error Status */
-
-#define AT91_SDRAMC_MDR		(AT91_SDRAMC + 0x24)	/* SDRAM Memory Device Register */
-#define		AT91_SDRAMC_MD		(3 << 0)		/* Memory Device Type */
-#define			AT91_SDRAMC_MD_SDRAM		0
-#define			AT91_SDRAMC_MD_LOW_POWER_SDRAM	1
-
-
-/* Static Memory Controller (SMC) registers */
-#define AT91_SMC_SETUP(n)	(AT91_SMC + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
-#define		AT91_SMC_NWESETUP	(0x3f << 0)			/* NWE Setup Length */
-#define			AT91_SMC_NWESETUP_(x)	((x) << 0)
-#define		AT91_SMC_NCS_WRSETUP	(0x3f << 8)			/* NCS Setup Length in Write Access */
-#define			AT91_SMC_NCS_WRSETUP_(x)	((x) << 8)
-#define		AT91_SMC_NRDSETUP	(0x3f << 16)			/* NRD Setup Length */
-#define			AT91_SMC_NRDSETUP_(x)	((x) << 16)
-#define		AT91_SMC_NCS_RDSETUP	(0x3f << 24)			/* NCS Setup Length in Read Access */
-#define			AT91_SMC_NCS_RDSETUP_(x)	((x) << 24)
-
-#define AT91_SMC_PULSE(n)	(AT91_SMC + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
-#define		AT91_SMC_NWEPULSE	(0x7f <<  0)			/* NWE Pulse Length */
-#define			AT91_SMC_NWEPULSE_(x)	((x) << 0)
-#define		AT91_SMC_NCS_WRPULSE	(0x7f <<  8)			/* NCS Pulse Length in Write Access */
-#define			AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
-#define		AT91_SMC_NRDPULSE	(0x7f << 16)			/* NRD Pulse Length */
-#define			AT91_SMC_NRDPULSE_(x)	((x) << 16)
-#define		AT91_SMC_NCS_RDPULSE	(0x7f << 24)			/* NCS Pulse Length in Read Access */
-#define			AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
-
-#define AT91_SMC_CYCLE(n)	(AT91_SMC + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
-#define		AT91_SMC_NWECYCLE	(0x1ff << 0 )			/* Total Write Cycle Length */
-#define			AT91_SMC_NWECYCLE_(x)	((x) << 0)
-#define		AT91_SMC_NRDCYCLE	(0x1ff << 16)			/* Total Read Cycle Length */
-#define			AT91_SMC_NRDCYCLE_(x)	((x) << 16)
-
-#define AT91_SMC_MODE(n)	(AT91_SMC + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
-#define		AT91_SMC_READMODE	(1 <<  0)			/* Read Mode */
-#define		AT91_SMC_WRITEMODE	(1 <<  1)			/* Write Mode */
-#define		AT91_SMC_EXNWMODE	(3 <<  4)			/* NWAIT Mode */
-#define			AT91_SMC_EXNWMODE_DISABLE	(0 << 4)
-#define			AT91_SMC_EXNWMODE_FROZEN	(2 << 4)
-#define			AT91_SMC_EXNWMODE_READY		(3 << 4)
-#define		AT91_SMC_BAT		(1 <<  8)			/* Byte Access Type */
-#define			AT91_SMC_BAT_SELECT		(0 << 8)
-#define			AT91_SMC_BAT_WRITE		(1 << 8)
-#define		AT91_SMC_DBW		(3 << 12)			/* Data Bus Width */
-#define			AT91_SMC_DBW_8			(0 << 12)
-#define			AT91_SMC_DBW_16			(1 << 12)
-#define			AT91_SMC_DBW_32			(2 << 12)
-#define		AT91_SMC_TDF		(0xf << 16)			/* Data Float Time. */
-#define			AT91_SMC_TDF_(x)		((x) << 16)
-#define		AT91_SMC_TDFMODE	(1 << 20)			/* TDF Optimization - Enabled */
-#define		AT91_SMC_PMEN		(1 << 24)			/* Page Mode Enabled */
-#define		AT91_SMC_PS		(3 << 28)			/* Page Size */
-#define			AT91_SMC_PS_4			(0 << 28)
-#define			AT91_SMC_PS_8			(1 << 28)
-#define			AT91_SMC_PS_16			(2 << 28)
-#define			AT91_SMC_PS_32			(3 << 28)
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/board.h b/include/asm-arm/arch-at91rm9200/board.h
deleted file mode 100644
index f3a974b..0000000
--- a/include/asm-arm/arch-at91rm9200/board.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/board.h
- *
- *  Copyright (C) 2005 HP Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * These are data structures found in platform_device.dev.platform_data,
- * and describing board-specific data needed by drivers.  For example,
- * which pin is used for a given GPIO role.
- *
- * In 2.6, drivers should strongly avoid board-specific knowledge so
- * that supporting new boards normally won't require driver patches.
- * Most board-specific knowledge should be in arch/.../board-*.c files.
- */
-
-#ifndef __ASM_ARCH_BOARD_H
-#define __ASM_ARCH_BOARD_H
-
-#include <linux/mtd/partitions.h>
-#include <linux/device.h>
-#include <linux/spi/spi.h>
-
- /* USB Device */
-struct at91_udc_data {
-	u8	vbus_pin;		/* high == host powering us */
-	u8	pullup_pin;		/* high == D+ pulled up */
-};
-extern void __init at91_add_device_udc(struct at91_udc_data *data);
-
- /* Compact Flash */
-struct at91_cf_data {
-	u8	irq_pin;		/* I/O IRQ */
-	u8	det_pin;		/* Card detect */
-	u8	vcc_pin;		/* power switching */
-	u8	rst_pin;		/* card reset */
-	u8	chipselect;		/* EBI Chip Select number */
-};
-extern void __init at91_add_device_cf(struct at91_cf_data *data);
-
- /* MMC / SD */
-struct at91_mmc_data {
-	u8		det_pin;	/* card detect IRQ */
-	unsigned	slot_b:1;	/* uses Slot B */
-	unsigned	wire4:1;	/* (SD) supports DAT0..DAT3 */
-	u8		wp_pin;		/* (SD) writeprotect detect */
-	u8		vcc_pin;	/* power switching (high == on) */
-};
-extern void __init at91_add_device_mmc(struct at91_mmc_data *data);
-
- /* Ethernet */
-struct at91_eth_data {
-	u8		phy_irq_pin;	/* PHY IRQ */
-	u8		is_rmii;	/* using RMII interface? */
-};
-extern void __init at91_add_device_eth(struct at91_eth_data *data);
-
-#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263)
-#define eth_platform_data	at91_eth_data
-#endif
-
- /* USB Host */
-struct at91_usbh_data {
-	u8		ports;		/* number of ports on root hub */
-};
-extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
-
- /* NAND / SmartMedia */
-struct at91_nand_data {
-	u8		enable_pin;	/* chip enable */
-	u8		det_pin;	/* card detect */
-	u8		rdy_pin;	/* ready/busy */
-	u8		ale;		/* address line number connected to ALE */
-	u8		cle;		/* address line number connected to CLE */
-	u8		bus_width_16;	/* buswidth is 16 bit */
-	struct mtd_partition* (*partition_info)(int, int*);
-};
-extern void __init at91_add_device_nand(struct at91_nand_data *data);
-
- /* I2C*/
-extern void __init at91_add_device_i2c(void);
-
- /* SPI */
-extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
-
- /* Serial */
-struct at91_uart_config {
-	unsigned short	console_tty;	/* tty number of serial console */
-	unsigned short	nr_tty;		/* number of serial tty's */
-	short		tty_map[];	/* map UART to tty number */
-};
-extern struct platform_device *atmel_default_console_device;
-extern void __init at91_init_serial(struct at91_uart_config *config);
-
-struct atmel_uart_data {
-	short		use_dma_tx;	/* use transmit DMA? */
-	short		use_dma_rx;	/* use receive DMA? */
-	void __iomem	*regs;		/* virtual base address, if any */
-};
-extern void __init at91_add_device_serial(void);
-
- /* LEDs */
-extern u8 at91_leds_cpu;
-extern u8 at91_leds_timer;
-extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/cpu.h b/include/asm-arm/arch-at91rm9200/cpu.h
deleted file mode 100644
index 6f8d09b..0000000
--- a/include/asm-arm/arch-at91rm9200/cpu.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/cpu.h
- *
- *  Copyright (C) 2006 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_CPU_H
-#define __ASM_ARCH_CPU_H
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_dbgu.h>
-
-
-#define ARCH_ID_AT91RM9200	0x09290780
-#define ARCH_ID_AT91SAM9260	0x019803a0
-#define ARCH_ID_AT91SAM9261	0x019703a0
-
-
-static inline unsigned long at91_cpu_identify(void)
-{
-	return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
-}
-
-
-#ifdef CONFIG_ARCH_AT91RM9200
-#define cpu_is_at91rm9200()	(at91_cpu_identify() == ARCH_ID_AT91RM9200)
-#else
-#define cpu_is_at91rm9200()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9260
-#define cpu_is_at91sam9260()	(at91_cpu_identify() == ARCH_ID_AT91SAM9260)
-#else
-#define cpu_is_at91sam9260()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9261
-#define cpu_is_at91sam9261()	(at91_cpu_identify() == ARCH_ID_AT91SAM9261)
-#else
-#define cpu_is_at91sam9261()	(0)
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/debug-macro.S b/include/asm-arm/arch-at91rm9200/debug-macro.S
deleted file mode 100644
index 85cdadf..0000000
--- a/include/asm-arm/arch-at91rm9200/debug-macro.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/debug-macro.S
- *
- *  Copyright (C) 2003-2005 SAN People
- *
- * Debugging macro include header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_dbgu.h>
-
-	.macro	addruart,rx
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1				@ MMU enabled?
-	ldreq	\rx, =AT91_BASE_SYS		@ System peripherals (phys address)
-	ldrne	\rx, =AT91_VA_BASE_SYS		@ System peripherals (virt address)
-	.endm
-
-	.macro	senduart,rd,rx
-	strb	\rd, [\rx, #AT91_DBGU_THR]	@ Write to Transmitter Holding Register
-	.endm
-
-	.macro	waituart,rd,rx
-1001:	ldr	\rd, [\rx, #AT91_DBGU_SR]	@ Read Status Register
-	tst	\rd, #AT91_DBGU_TXRDY		@ DBGU_TXRDY = 1 when ready to transmit
-	beq	1001b
-	.endm
-
-	.macro	busyuart,rd,rx
-1001:	ldr	\rd, [\rx, #AT91_DBGU_SR]	@ Read Status Register
-	tst	\rd, #AT91_DBGU_TXEMPTY		@ DBGU_TXEMPTY = 1 when transmission complete
-	beq	1001b
-	.endm
-
diff --git a/include/asm-arm/arch-at91rm9200/dma.h b/include/asm-arm/arch-at91rm9200/dma.h
deleted file mode 100644
index 22c1dfd..0000000
--- a/include/asm-arm/arch-at91rm9200/dma.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/dma.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/include/asm-arm/arch-at91rm9200/entry-macro.S b/include/asm-arm/arch-at91rm9200/entry-macro.S
deleted file mode 100644
index 57248a7..0000000
--- a/include/asm-arm/arch-at91rm9200/entry-macro.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/entry-macro.S
- *
- *  Copyright (C) 2003-2005 SAN People
- *
- * Low-level IRQ helper macros for AT91RM9200 platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_aic.h>
-
-	.macro	disable_fiq
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\base, =(AT91_VA_BASE_SYS)		@ base virtual address of SYS peripherals
-	ldr	\irqnr, [\base, #AT91_AIC_IVR]		@ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
-	ldr	\irqstat, [\base, #AT91_AIC_ISR]	@ read interrupt source number
-	teq	\irqstat, #0				@ ISR is 0 when no current interrupt, or spurious interrupt
-	streq	\tmp, [\base, #AT91_AIC_EOICR]		@ not going to be handled further, then ACK it now.
-	.endm
-
diff --git a/include/asm-arm/arch-at91rm9200/gpio.h b/include/asm-arm/arch-at91rm9200/gpio.h
deleted file mode 100644
index a011d27..0000000
--- a/include/asm-arm/arch-at91rm9200/gpio.h
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/gpio.h
- *
- *  Copyright (C) 2005 HP Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_AT91RM9200_GPIO_H
-#define __ASM_ARCH_AT91RM9200_GPIO_H
-
-#include <asm/irq.h>
-
-#define PIN_BASE		NR_AIC_IRQS
-
-#define MAX_GPIO_BANKS		4
-
-/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
-
-#define	AT91_PIN_PA0	(PIN_BASE + 0x00 + 0)
-#define	AT91_PIN_PA1	(PIN_BASE + 0x00 + 1)
-#define	AT91_PIN_PA2	(PIN_BASE + 0x00 + 2)
-#define	AT91_PIN_PA3	(PIN_BASE + 0x00 + 3)
-#define	AT91_PIN_PA4	(PIN_BASE + 0x00 + 4)
-
-#define	AT91_PIN_PA5	(PIN_BASE + 0x00 + 5)
-#define	AT91_PIN_PA6	(PIN_BASE + 0x00 + 6)
-#define	AT91_PIN_PA7	(PIN_BASE + 0x00 + 7)
-#define	AT91_PIN_PA8	(PIN_BASE + 0x00 + 8)
-#define	AT91_PIN_PA9	(PIN_BASE + 0x00 + 9)
-
-#define	AT91_PIN_PA10	(PIN_BASE + 0x00 + 10)
-#define	AT91_PIN_PA11	(PIN_BASE + 0x00 + 11)
-#define	AT91_PIN_PA12	(PIN_BASE + 0x00 + 12)
-#define	AT91_PIN_PA13	(PIN_BASE + 0x00 + 13)
-#define	AT91_PIN_PA14	(PIN_BASE + 0x00 + 14)
-
-#define	AT91_PIN_PA15	(PIN_BASE + 0x00 + 15)
-#define	AT91_PIN_PA16	(PIN_BASE + 0x00 + 16)
-#define	AT91_PIN_PA17	(PIN_BASE + 0x00 + 17)
-#define	AT91_PIN_PA18	(PIN_BASE + 0x00 + 18)
-#define	AT91_PIN_PA19	(PIN_BASE + 0x00 + 19)
-
-#define	AT91_PIN_PA20	(PIN_BASE + 0x00 + 20)
-#define	AT91_PIN_PA21	(PIN_BASE + 0x00 + 21)
-#define	AT91_PIN_PA22	(PIN_BASE + 0x00 + 22)
-#define	AT91_PIN_PA23	(PIN_BASE + 0x00 + 23)
-#define	AT91_PIN_PA24	(PIN_BASE + 0x00 + 24)
-
-#define	AT91_PIN_PA25	(PIN_BASE + 0x00 + 25)
-#define	AT91_PIN_PA26	(PIN_BASE + 0x00 + 26)
-#define	AT91_PIN_PA27	(PIN_BASE + 0x00 + 27)
-#define	AT91_PIN_PA28	(PIN_BASE + 0x00 + 28)
-#define	AT91_PIN_PA29	(PIN_BASE + 0x00 + 29)
-
-#define	AT91_PIN_PA30	(PIN_BASE + 0x00 + 30)
-#define	AT91_PIN_PA31	(PIN_BASE + 0x00 + 31)
-
-#define	AT91_PIN_PB0	(PIN_BASE + 0x20 + 0)
-#define	AT91_PIN_PB1	(PIN_BASE + 0x20 + 1)
-#define	AT91_PIN_PB2	(PIN_BASE + 0x20 + 2)
-#define	AT91_PIN_PB3	(PIN_BASE + 0x20 + 3)
-#define	AT91_PIN_PB4	(PIN_BASE + 0x20 + 4)
-
-#define	AT91_PIN_PB5	(PIN_BASE + 0x20 + 5)
-#define	AT91_PIN_PB6	(PIN_BASE + 0x20 + 6)
-#define	AT91_PIN_PB7	(PIN_BASE + 0x20 + 7)
-#define	AT91_PIN_PB8	(PIN_BASE + 0x20 + 8)
-#define	AT91_PIN_PB9	(PIN_BASE + 0x20 + 9)
-
-#define	AT91_PIN_PB10	(PIN_BASE + 0x20 + 10)
-#define	AT91_PIN_PB11	(PIN_BASE + 0x20 + 11)
-#define	AT91_PIN_PB12	(PIN_BASE + 0x20 + 12)
-#define	AT91_PIN_PB13	(PIN_BASE + 0x20 + 13)
-#define	AT91_PIN_PB14	(PIN_BASE + 0x20 + 14)
-
-#define	AT91_PIN_PB15	(PIN_BASE + 0x20 + 15)
-#define	AT91_PIN_PB16	(PIN_BASE + 0x20 + 16)
-#define	AT91_PIN_PB17	(PIN_BASE + 0x20 + 17)
-#define	AT91_PIN_PB18	(PIN_BASE + 0x20 + 18)
-#define	AT91_PIN_PB19	(PIN_BASE + 0x20 + 19)
-
-#define	AT91_PIN_PB20	(PIN_BASE + 0x20 + 20)
-#define	AT91_PIN_PB21	(PIN_BASE + 0x20 + 21)
-#define	AT91_PIN_PB22	(PIN_BASE + 0x20 + 22)
-#define	AT91_PIN_PB23	(PIN_BASE + 0x20 + 23)
-#define	AT91_PIN_PB24	(PIN_BASE + 0x20 + 24)
-
-#define	AT91_PIN_PB25	(PIN_BASE + 0x20 + 25)
-#define	AT91_PIN_PB26	(PIN_BASE + 0x20 + 26)
-#define	AT91_PIN_PB27	(PIN_BASE + 0x20 + 27)
-#define	AT91_PIN_PB28	(PIN_BASE + 0x20 + 28)
-#define	AT91_PIN_PB29	(PIN_BASE + 0x20 + 29)
-
-#define	AT91_PIN_PB30	(PIN_BASE + 0x20 + 30)
-#define	AT91_PIN_PB31	(PIN_BASE + 0x20 + 31)
-
-#define	AT91_PIN_PC0	(PIN_BASE + 0x40 + 0)
-#define	AT91_PIN_PC1	(PIN_BASE + 0x40 + 1)
-#define	AT91_PIN_PC2	(PIN_BASE + 0x40 + 2)
-#define	AT91_PIN_PC3	(PIN_BASE + 0x40 + 3)
-#define	AT91_PIN_PC4	(PIN_BASE + 0x40 + 4)
-
-#define	AT91_PIN_PC5	(PIN_BASE + 0x40 + 5)
-#define	AT91_PIN_PC6	(PIN_BASE + 0x40 + 6)
-#define	AT91_PIN_PC7	(PIN_BASE + 0x40 + 7)
-#define	AT91_PIN_PC8	(PIN_BASE + 0x40 + 8)
-#define	AT91_PIN_PC9	(PIN_BASE + 0x40 + 9)
-
-#define	AT91_PIN_PC10	(PIN_BASE + 0x40 + 10)
-#define	AT91_PIN_PC11	(PIN_BASE + 0x40 + 11)
-#define	AT91_PIN_PC12	(PIN_BASE + 0x40 + 12)
-#define	AT91_PIN_PC13	(PIN_BASE + 0x40 + 13)
-#define	AT91_PIN_PC14	(PIN_BASE + 0x40 + 14)
-
-#define	AT91_PIN_PC15	(PIN_BASE + 0x40 + 15)
-#define	AT91_PIN_PC16	(PIN_BASE + 0x40 + 16)
-#define	AT91_PIN_PC17	(PIN_BASE + 0x40 + 17)
-#define	AT91_PIN_PC18	(PIN_BASE + 0x40 + 18)
-#define	AT91_PIN_PC19	(PIN_BASE + 0x40 + 19)
-
-#define	AT91_PIN_PC20	(PIN_BASE + 0x40 + 20)
-#define	AT91_PIN_PC21	(PIN_BASE + 0x40 + 21)
-#define	AT91_PIN_PC22	(PIN_BASE + 0x40 + 22)
-#define	AT91_PIN_PC23	(PIN_BASE + 0x40 + 23)
-#define	AT91_PIN_PC24	(PIN_BASE + 0x40 + 24)
-
-#define	AT91_PIN_PC25	(PIN_BASE + 0x40 + 25)
-#define	AT91_PIN_PC26	(PIN_BASE + 0x40 + 26)
-#define	AT91_PIN_PC27	(PIN_BASE + 0x40 + 27)
-#define	AT91_PIN_PC28	(PIN_BASE + 0x40 + 28)
-#define	AT91_PIN_PC29	(PIN_BASE + 0x40 + 29)
-
-#define	AT91_PIN_PC30	(PIN_BASE + 0x40 + 30)
-#define	AT91_PIN_PC31	(PIN_BASE + 0x40 + 31)
-
-#define	AT91_PIN_PD0	(PIN_BASE + 0x60 + 0)
-#define	AT91_PIN_PD1	(PIN_BASE + 0x60 + 1)
-#define	AT91_PIN_PD2	(PIN_BASE + 0x60 + 2)
-#define	AT91_PIN_PD3	(PIN_BASE + 0x60 + 3)
-#define	AT91_PIN_PD4	(PIN_BASE + 0x60 + 4)
-
-#define	AT91_PIN_PD5	(PIN_BASE + 0x60 + 5)
-#define	AT91_PIN_PD6	(PIN_BASE + 0x60 + 6)
-#define	AT91_PIN_PD7	(PIN_BASE + 0x60 + 7)
-#define	AT91_PIN_PD8	(PIN_BASE + 0x60 + 8)
-#define	AT91_PIN_PD9	(PIN_BASE + 0x60 + 9)
-
-#define	AT91_PIN_PD10	(PIN_BASE + 0x60 + 10)
-#define	AT91_PIN_PD11	(PIN_BASE + 0x60 + 11)
-#define	AT91_PIN_PD12	(PIN_BASE + 0x60 + 12)
-#define	AT91_PIN_PD13	(PIN_BASE + 0x60 + 13)
-#define	AT91_PIN_PD14	(PIN_BASE + 0x60 + 14)
-
-#define	AT91_PIN_PD15	(PIN_BASE + 0x60 + 15)
-#define	AT91_PIN_PD16	(PIN_BASE + 0x60 + 16)
-#define	AT91_PIN_PD17	(PIN_BASE + 0x60 + 17)
-#define	AT91_PIN_PD18	(PIN_BASE + 0x60 + 18)
-#define	AT91_PIN_PD19	(PIN_BASE + 0x60 + 19)
-
-#define	AT91_PIN_PD20	(PIN_BASE + 0x60 + 20)
-#define	AT91_PIN_PD21	(PIN_BASE + 0x60 + 21)
-#define	AT91_PIN_PD22	(PIN_BASE + 0x60 + 22)
-#define	AT91_PIN_PD23	(PIN_BASE + 0x60 + 23)
-#define	AT91_PIN_PD24	(PIN_BASE + 0x60 + 24)
-
-#define	AT91_PIN_PD25	(PIN_BASE + 0x60 + 25)
-#define	AT91_PIN_PD26	(PIN_BASE + 0x60 + 26)
-#define	AT91_PIN_PD27	(PIN_BASE + 0x60 + 27)
-#define	AT91_PIN_PD28	(PIN_BASE + 0x60 + 28)
-#define	AT91_PIN_PD29	(PIN_BASE + 0x60 + 29)
-
-#define	AT91_PIN_PD30	(PIN_BASE + 0x60 + 30)
-#define	AT91_PIN_PD31	(PIN_BASE + 0x60 + 31)
-
-#ifndef __ASSEMBLY__
-/* setup setup routines, called from board init or driver probe() */
-extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_gpio_output(unsigned pin, int value);
-extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on);
-extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on);
-
-/* callable at any time */
-extern int at91_set_gpio_value(unsigned pin, int value);
-extern int at91_get_gpio_value(unsigned pin);
-
-/* callable only from core power-management code */
-extern void at91_gpio_suspend(void);
-extern void at91_gpio_resume(void);
-#endif
-
-#endif
-
diff --git a/include/asm-arm/arch-at91rm9200/hardware.h b/include/asm-arm/arch-at91rm9200/hardware.h
deleted file mode 100644
index 9ea5bfe..0000000
--- a/include/asm-arm/arch-at91rm9200/hardware.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/hardware.h
- *
- *  Copyright (C) 2003 SAN People
- *  Copyright (C) 2003 ATMEL
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-#if defined(CONFIG_ARCH_AT91RM9200)
-#include <asm/arch/at91rm9200.h>
-#elif defined(CONFIG_ARCH_AT91SAM9260)
-#include <asm/arch/at91sam9260.h>
-#elif defined(CONFIG_ARCH_AT91SAM9261)
-#include <asm/arch/at91sam9261.h>
-#else
-#error "Unsupported AT91 processor"
-#endif
-
-
-/*
- * Remap the peripherals from address 0xFFFA0000 .. 0xFFFFFFFF
- * to 0xFEFA0000 .. 0xFF000000.  (384Kb)
- */
-#define AT91_IO_PHYS_BASE	0xFFFA0000
-#define AT91_IO_SIZE		(0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
-#define AT91_IO_VIRT_BASE	(0xFF000000 - AT91_IO_SIZE)
-
- /* Convert a physical IO address to virtual IO address */
-#define AT91_IO_P2V(x)	((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
-
-/*
- * Virtual to Physical Address mapping for IO devices.
- */
-#define AT91_VA_BASE_SYS	AT91_IO_P2V(AT91_BASE_SYS)
-#define AT91_VA_BASE_EMAC	AT91_IO_P2V(AT91RM9200_BASE_EMAC)
-
- /* Internal SRAM is mapped below the IO devices */
-#define AT91_SRAM_MAX		SZ_1M
-#define AT91_VIRT_BASE		(AT91_IO_VIRT_BASE - AT91_SRAM_MAX)
-
-/* Serial ports */
-#define ATMEL_MAX_UART		7		/* 6 USART3's and one DBGU port (SAM9260) */
-
-/* External Memory Map */
-#define AT91_CHIPSELECT_0	0x10000000
-#define AT91_CHIPSELECT_1	0x20000000
-#define AT91_CHIPSELECT_2	0x30000000
-#define AT91_CHIPSELECT_3	0x40000000
-#define AT91_CHIPSELECT_4	0x50000000
-#define AT91_CHIPSELECT_5	0x60000000
-#define AT91_CHIPSELECT_6	0x70000000
-#define AT91_CHIPSELECT_7	0x80000000
-
-/* SDRAM */
-#define AT91_SDRAM_BASE		AT91_CHIPSELECT_1
-
-/* Clocks */
-#define AT91_SLOW_CLOCK		32768		/* slow clock */
-
-#ifndef __ASSEMBLY__
-#include <asm/io.h>
-
-static inline unsigned int at91_sys_read(unsigned int reg_offset)
-{
-	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
-
-	return __raw_readl(addr + reg_offset);
-}
-
-static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
-{
-	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
-
-	__raw_writel(value, addr + reg_offset);
-}
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/io.h b/include/asm-arm/arch-at91rm9200/io.h
deleted file mode 100644
index 88fd1be..0000000
--- a/include/asm-arm/arch-at91rm9200/io.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/io.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include <asm/io.h>
-
-#define IO_SPACE_LIMIT		0xFFFFFFFF
-
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
-
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/irqs.h b/include/asm-arm/arch-at91rm9200/irqs.h
deleted file mode 100644
index c0679ea..0000000
--- a/include/asm-arm/arch-at91rm9200/irqs.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/irqs.h
- *
- *  Copyright (C) 2004 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include <asm/arch/at91_aic.h>
-
-#define NR_AIC_IRQS 32
-
-
-/*
- * Acknowledge interrupt with AIC after interrupt has been handled.
- *   (by kernel/irq.c)
- */
-#define irq_finish(irq) do { at91_sys_write(AT91_AIC_EOICR, 0); } while (0)
-
-
-/*
- * IRQ interrupt symbols are the AT91xxx_ID_* symbols
- * for IRQs handled directly through the AIC, or else the AT91_PIN_*
- * symbols in gpio.h for ones handled indirectly as GPIOs.
- * We make provision for 4 banks of GPIO.
- */
-#define	NR_IRQS		(NR_AIC_IRQS + (4 * 32))
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/memory.h b/include/asm-arm/arch-at91rm9200/memory.h
deleted file mode 100644
index f985069..0000000
--- a/include/asm-arm/arch-at91rm9200/memory.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/memory.h
- *
- *  Copyright (C) 2004 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/hardware.h>
-
-#define PHYS_OFFSET	(AT91_SDRAM_BASE)
-
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/system.h b/include/asm-arm/arch-at91rm9200/system.h
deleted file mode 100644
index 9c67130..0000000
--- a/include/asm-arm/arch-at91rm9200/system.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/system.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_st.h>
-#include <asm/arch/at91_dbgu.h>
-
-static inline void arch_idle(void)
-{
-	/*
-	 * Disable the processor clock.  The processor will be automatically
-	 * re-enabled by an interrupt or by a reset.
-	 */
-//	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
-
-	/*
-	 * Set the processor (CP15) into 'Wait for Interrupt' mode.
-	 * Unlike disabling the processor clock via the PMC (above)
-	 *  this allows the processor to be woken via JTAG.
-	 */
-	cpu_do_idle();
-}
-
-void (*at91_arch_reset)(void);
-
-static inline void arch_reset(char mode)
-{
-	/* call the CPU-specific reset function */
-	if (at91_arch_reset)
-		(at91_arch_reset)();
-}
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/timex.h b/include/asm-arm/arch-at91rm9200/timex.h
deleted file mode 100644
index faeca45..0000000
--- a/include/asm-arm/arch-at91rm9200/timex.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/timex.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#include <asm/hardware.h>
-
-#if defined(CONFIG_ARCH_AT91RM9200)
-
-#define CLOCK_TICK_RATE		(AT91_SLOW_CLOCK)
-
-#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9261)
-
-#define AT91SAM9_MASTER_CLOCK	99300000
-#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
-
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/uncompress.h b/include/asm-arm/arch-at91rm9200/uncompress.h
deleted file mode 100644
index 34b4b93f..0000000
--- a/include/asm-arm/arch-at91rm9200/uncompress.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/uncompress.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_dbgu.h>
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-static void putc(int c)
-{
-	void __iomem *sys = (void __iomem *) AT91_BASE_SYS;	/* physical address */
-
-	while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXRDY))
-		barrier();
-	__raw_writel(c, sys + AT91_DBGU_THR);
-}
-
-static inline void flush(void)
-{
-	void __iomem *sys = (void __iomem *) AT91_BASE_SYS;	/* physical address */
-
-	/* wait for transmission to complete */
-	while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXEMPTY))
-		barrier();
-}
-
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/vmalloc.h b/include/asm-arm/arch-at91rm9200/vmalloc.h
deleted file mode 100644
index 0a23b8c..0000000
--- a/include/asm-arm/arch-at91rm9200/vmalloc.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/vmalloc.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END		(AT91_VIRT_BASE & PGDIR_MASK)
-
-#endif
diff --git a/include/asm-avr32/arch-at32ap/at91_pdc.h b/include/asm-avr32/arch-at32ap/at91_pdc.h
index 79d6e02..a54adf5 100644
--- a/include/asm-avr32/arch-at32ap/at91_pdc.h
+++ b/include/asm-avr32/arch-at32ap/at91_pdc.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91rm9200/at91_pdc.h
+ * include/asm-arm/arch-at91/at91_pdc.h
  *
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People
-- 
cgit v1.1


From d0760b3bc8ff9b34e3e2e166e2102548a24751b4 Mon Sep 17 00:00:00 2001
From: Andrew Victor <andrew@sanpeople.com>
Date: Thu, 8 Feb 2007 09:00:39 +0100
Subject: [ARM] 4143/1: AT91: Prepare for AT91SAM9263 support

The Atmel AT91SAM9263 processor includes many more integrated
peripherals than Atmel's previous ARM9-based AT91 processors, so this
has necessitated a few changes to the core AT91 support.

These changes are:
      * The system peripheral I/O region we remap has increased from
        0xFFFA0000..0xFFFFFFFF to 0xFFF78000..0xFFFFFFFF.
      * The increased I/O region forces changes to entry-macro.S and
        debug-macro.S due to ARM's limited immediate offset addressing
        modes.
      * Maximum number of GPIO banks increases to 5.
      * 2 MMC controllers so the board-setup code needs to specify which
        controller it wishes to use when calling at91_add_device_mmc().

Original patch from Nicolas Ferre.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/at91rm9200_devices.c        |  4 +-
 arch/arm/mach-at91/at91sam9260_devices.c       |  4 +-
 arch/arm/mach-at91/at91sam9261_devices.c       |  4 +-
 arch/arm/mach-at91/board-carmeva.c             |  2 +-
 arch/arm/mach-at91/board-csb337.c              |  2 +-
 arch/arm/mach-at91/board-dk.c                  |  2 +-
 arch/arm/mach-at91/board-eb9200.c              |  2 +-
 arch/arm/mach-at91/board-ek.c                  |  2 +-
 arch/arm/mach-at91/board-kb9202.c              |  2 +-
 arch/arm/mach-at91/board-sam9260ek.c           |  4 +-
 arch/arm/mach-at91/board-sam9261ek.c           |  4 +-
 include/asm-arm/arch-at91/at91sam9260_matrix.h |  2 +-
 include/asm-arm/arch-at91/board.h              |  3 +-
 include/asm-arm/arch-at91/debug-macro.S        | 16 +++----
 include/asm-arm/arch-at91/entry-macro.S        | 10 ++---
 include/asm-arm/arch-at91/gpio.h               | 59 +++++++++++++++-----------
 include/asm-arm/arch-at91/hardware.h           |  8 ++--
 include/asm-arm/arch-at91/irqs.h               |  4 +-
 18 files changed, 72 insertions(+), 62 deletions(-)

diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index a06498c..077c81f 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -315,7 +315,7 @@ static struct platform_device at91rm9200_mmc_device = {
 	.num_resources	= ARRAY_SIZE(mmc_resources),
 };
 
-void __init at91_add_device_mmc(struct at91_mmc_data *data)
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 {
 	if (!data)
 		return;
@@ -361,7 +361,7 @@ void __init at91_add_device_mmc(struct at91_mmc_data *data)
 	platform_device_register(&at91rm9200_mmc_device);
 }
 #else
-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 4adff70..b5d8968 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -229,7 +229,7 @@ static struct platform_device at91sam9260_mmc_device = {
 	.num_resources	= ARRAY_SIZE(mmc_resources),
 };
 
-void __init at91_add_device_mmc(struct at91_mmc_data *data)
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 {
 	if (!data)
 		return;
@@ -275,7 +275,7 @@ void __init at91_add_device_mmc(struct at91_mmc_data *data)
 	platform_device_register(&at91sam9260_mmc_device);
 }
 #else
-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 3249de0..b2f6d33 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -159,7 +159,7 @@ static struct platform_device at91sam9261_mmc_device = {
 	.num_resources	= ARRAY_SIZE(mmc_resources),
 };
 
-void __init at91_add_device_mmc(struct at91_mmc_data *data)
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 {
 	if (!data)
 		return;
@@ -192,7 +192,7 @@ void __init at91_add_device_mmc(struct at91_mmc_data *data)
 	platform_device_register(&at91sam9261_mmc_device);
 }
 #else
-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index a081532..b451861 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -134,7 +134,7 @@ static void __init carmeva_board_init(void)
 	/* Compact Flash */
 //	at91_add_device_cf(&carmeva_cf_data);
 	/* MMC */
-	at91_add_device_mmc(&carmeva_mmc_data);
+	at91_add_device_mmc(0, &carmeva_mmc_data);
 }
 
 MACHINE_START(CARMEVA, "Carmeva")
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 45d6d9b..871c660 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -130,7 +130,7 @@ static void __init csb337_board_init(void)
 	/* SPI */
 	at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
 	/* MMC */
-	at91_add_device_mmc(&csb337_mmc_data);
+	at91_add_device_mmc(0, &csb337_mmc_data);
 }
 
 MACHINE_START(CSB337, "Cogent CSB337")
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c
index 7401dbe..6043c38 100644
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-dk.c
@@ -194,7 +194,7 @@ static void __init dk_board_init(void)
 #else
 	/* MMC */
 	at91_set_gpio_output(AT91_PIN_PB7, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-	at91_add_device_mmc(&dk_mmc_data);
+	at91_add_device_mmc(0, &dk_mmc_data);
 #endif
 	/* NAND */
 	at91_add_device_nand(&dk_nand_data);
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index 56d5ef6..20458b5 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -109,7 +109,7 @@ static void __init eb9200_board_init(void)
 	at91_add_device_spi(NULL, 0);
 	/* MMC */
 	/* only supports 1 or 4 bit interface, not wired through to SPI */
-	at91_add_device_mmc(&eb9200_mmc_data);
+	at91_add_device_mmc(0, &eb9200_mmc_data);
 }
 
 MACHINE_START(ATEB9200, "Embest ATEB9200")
diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c
index 0f589dd..322fdd7 100644
--- a/arch/arm/mach-at91/board-ek.c
+++ b/arch/arm/mach-at91/board-ek.c
@@ -154,7 +154,7 @@ static void __init ek_board_init(void)
 #else
 	/* MMC */
 	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-	at91_add_device_mmc(&ek_mmc_data);
+	at91_add_device_mmc(0, &ek_mmc_data);
 #endif
 	/* NOR Flash */
 	platform_device_register(&ek_flash);
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 17e68f5..76f6e1e 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -122,7 +122,7 @@ static void __init kb9202_board_init(void)
 	/* USB Device */
 	at91_add_device_udc(&kb9202_udc_data);
 	/* MMC */
-	at91_add_device_mmc(&kb9202_mmc_data);
+	at91_add_device_mmc(0, &kb9202_mmc_data);
 	/* I2C */
 	at91_add_device_i2c();
 	/* SPI */
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 6ae272d..57fb449 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91/board-ek.c
+ * linux/arch/arm/mach-at91/board-sam9260ek.c
  *
  *  Copyright (C) 2005 SAN People
  *  Copyright (C) 2006 Atmel
@@ -187,7 +187,7 @@ static void __init ek_board_init(void)
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* MMC */
-	at91_add_device_mmc(&ek_mmc_data);
+	at91_add_device_mmc(0, &ek_mmc_data);
 }
 
 MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 25d6263..b7e7724 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91/board-ek.c
+ * linux/arch/arm/mach-at91/board-sam9261ek.c
  *
  *  Copyright (C) 2005 SAN People
  *  Copyright (C) 2006 Atmel
@@ -243,7 +243,7 @@ static void __init ek_board_init(void)
 	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
 #else
 	/* MMC */
-	at91_add_device_mmc(&ek_mmc_data);
+	at91_add_device_mmc(0, &ek_mmc_data);
 #endif
 }
 
diff --git a/include/asm-arm/arch-at91/at91sam9260_matrix.h b/include/asm-arm/arch-at91/at91sam9260_matrix.h
index 573e97a..aacb1e9 100644
--- a/include/asm-arm/arch-at91/at91sam9260_matrix.h
+++ b/include/asm-arm/arch-at91/at91sam9260_matrix.h
@@ -18,7 +18,7 @@
 #define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
 #define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
 #define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x04)	/* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
 #define		AT91_MATRIX_ULBT		(7 << 0)	/* Undefined Length Burst Type */
 #define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
 #define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h
index bf1afd0..7b9903c 100644
--- a/include/asm-arm/arch-at91/board.h
+++ b/include/asm-arm/arch-at91/board.h
@@ -60,7 +60,7 @@ struct at91_mmc_data {
 	u8		wp_pin;		/* (SD) writeprotect detect */
 	u8		vcc_pin;	/* power switching (high == on) */
 };
-extern void __init at91_add_device_mmc(struct at91_mmc_data *data);
+extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
 
  /* Ethernet */
 struct at91_eth_data {
@@ -76,6 +76,7 @@ extern void __init at91_add_device_eth(struct at91_eth_data *data);
  /* USB Host */
 struct at91_usbh_data {
 	u8		ports;		/* number of ports on root hub */
+	u8		vbus_pin[];	/* port power-control pin */
 };
 extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
 
diff --git a/include/asm-arm/arch-at91/debug-macro.S b/include/asm-arm/arch-at91/debug-macro.S
index 20721ef..13e9f5e 100644
--- a/include/asm-arm/arch-at91/debug-macro.S
+++ b/include/asm-arm/arch-at91/debug-macro.S
@@ -16,24 +16,24 @@
 
 	.macro	addruart,rx
 	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1				@ MMU enabled?
-	ldreq	\rx, =AT91_BASE_SYS		@ System peripherals (phys address)
-	ldrne	\rx, =AT91_VA_BASE_SYS		@ System peripherals (virt address)
+	tst	\rx, #1						@ MMU enabled?
+	ldreq	\rx, =(AT91_BASE_SYS + AT91_DBGU)		@ System peripherals (phys address)
+	ldrne	\rx, =(AT91_VA_BASE_SYS	+ AT91_DBGU)		@ System peripherals (virt address)
 	.endm
 
 	.macro	senduart,rd,rx
-	strb	\rd, [\rx, #AT91_DBGU_THR]	@ Write to Transmitter Holding Register
+	strb	\rd, [\rx, #(AT91_DBGU_THR - AT91_DBGU)]	@ Write to Transmitter Holding Register
 	.endm
 
 	.macro	waituart,rd,rx
-1001:	ldr	\rd, [\rx, #AT91_DBGU_SR]	@ Read Status Register
-	tst	\rd, #AT91_DBGU_TXRDY		@ DBGU_TXRDY = 1 when ready to transmit
+1001:	ldr	\rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)]		@ Read Status Register
+	tst	\rd, #AT91_DBGU_TXRDY				@ DBGU_TXRDY = 1 when ready to transmit
 	beq	1001b
 	.endm
 
 	.macro	busyuart,rd,rx
-1001:	ldr	\rd, [\rx, #AT91_DBGU_SR]	@ Read Status Register
-	tst	\rd, #AT91_DBGU_TXEMPTY		@ DBGU_TXEMPTY = 1 when transmission complete
+1001:	ldr	\rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)]		@ Read Status Register
+	tst	\rd, #AT91_DBGU_TXEMPTY				@ DBGU_TXEMPTY = 1 when transmission complete
 	beq	1001b
 	.endm
 
diff --git a/include/asm-arm/arch-at91/entry-macro.S b/include/asm-arm/arch-at91/entry-macro.S
index a6f3383..76c8ccc 100644
--- a/include/asm-arm/arch-at91/entry-macro.S
+++ b/include/asm-arm/arch-at91/entry-macro.S
@@ -17,10 +17,10 @@
 	.endm
 
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\base, =(AT91_VA_BASE_SYS)		@ base virtual address of SYS peripherals
-	ldr	\irqnr, [\base, #AT91_AIC_IVR]		@ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
-	ldr	\irqstat, [\base, #AT91_AIC_ISR]	@ read interrupt source number
-	teq	\irqstat, #0				@ ISR is 0 when no current interrupt, or spurious interrupt
-	streq	\tmp, [\base, #AT91_AIC_EOICR]		@ not going to be handled further, then ACK it now.
+	ldr	\base, =(AT91_VA_BASE_SYS + AT91_AIC)		@ base virtual address of AIC peripheral
+	ldr	\irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)]	@ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
+	ldr	\irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)]	@ read interrupt source number
+	teq	\irqstat, #0					@ ISR is 0 when no current interrupt, or spurious interrupt
+	streq	\tmp, [\base, #(AT91_AIC_EOICR - AT91_AIC)]	@ not going to be handled further, then ACK it now.
 	.endm
 
diff --git a/include/asm-arm/arch-at91/gpio.h b/include/asm-arm/arch-at91/gpio.h
index 6d1a5eb..256f9b2 100644
--- a/include/asm-arm/arch-at91/gpio.h
+++ b/include/asm-arm/arch-at91/gpio.h
@@ -17,7 +17,7 @@
 
 #define PIN_BASE		NR_AIC_IRQS
 
-#define MAX_GPIO_BANKS		4
+#define MAX_GPIO_BANKS		5
 
 /* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
 
@@ -26,37 +26,31 @@
 #define	AT91_PIN_PA2	(PIN_BASE + 0x00 + 2)
 #define	AT91_PIN_PA3	(PIN_BASE + 0x00 + 3)
 #define	AT91_PIN_PA4	(PIN_BASE + 0x00 + 4)
-
 #define	AT91_PIN_PA5	(PIN_BASE + 0x00 + 5)
 #define	AT91_PIN_PA6	(PIN_BASE + 0x00 + 6)
 #define	AT91_PIN_PA7	(PIN_BASE + 0x00 + 7)
 #define	AT91_PIN_PA8	(PIN_BASE + 0x00 + 8)
 #define	AT91_PIN_PA9	(PIN_BASE + 0x00 + 9)
-
 #define	AT91_PIN_PA10	(PIN_BASE + 0x00 + 10)
 #define	AT91_PIN_PA11	(PIN_BASE + 0x00 + 11)
 #define	AT91_PIN_PA12	(PIN_BASE + 0x00 + 12)
 #define	AT91_PIN_PA13	(PIN_BASE + 0x00 + 13)
 #define	AT91_PIN_PA14	(PIN_BASE + 0x00 + 14)
-
 #define	AT91_PIN_PA15	(PIN_BASE + 0x00 + 15)
 #define	AT91_PIN_PA16	(PIN_BASE + 0x00 + 16)
 #define	AT91_PIN_PA17	(PIN_BASE + 0x00 + 17)
 #define	AT91_PIN_PA18	(PIN_BASE + 0x00 + 18)
 #define	AT91_PIN_PA19	(PIN_BASE + 0x00 + 19)
-
 #define	AT91_PIN_PA20	(PIN_BASE + 0x00 + 20)
 #define	AT91_PIN_PA21	(PIN_BASE + 0x00 + 21)
 #define	AT91_PIN_PA22	(PIN_BASE + 0x00 + 22)
 #define	AT91_PIN_PA23	(PIN_BASE + 0x00 + 23)
 #define	AT91_PIN_PA24	(PIN_BASE + 0x00 + 24)
-
 #define	AT91_PIN_PA25	(PIN_BASE + 0x00 + 25)
 #define	AT91_PIN_PA26	(PIN_BASE + 0x00 + 26)
 #define	AT91_PIN_PA27	(PIN_BASE + 0x00 + 27)
 #define	AT91_PIN_PA28	(PIN_BASE + 0x00 + 28)
 #define	AT91_PIN_PA29	(PIN_BASE + 0x00 + 29)
-
 #define	AT91_PIN_PA30	(PIN_BASE + 0x00 + 30)
 #define	AT91_PIN_PA31	(PIN_BASE + 0x00 + 31)
 
@@ -65,37 +59,31 @@
 #define	AT91_PIN_PB2	(PIN_BASE + 0x20 + 2)
 #define	AT91_PIN_PB3	(PIN_BASE + 0x20 + 3)
 #define	AT91_PIN_PB4	(PIN_BASE + 0x20 + 4)
-
 #define	AT91_PIN_PB5	(PIN_BASE + 0x20 + 5)
 #define	AT91_PIN_PB6	(PIN_BASE + 0x20 + 6)
 #define	AT91_PIN_PB7	(PIN_BASE + 0x20 + 7)
 #define	AT91_PIN_PB8	(PIN_BASE + 0x20 + 8)
 #define	AT91_PIN_PB9	(PIN_BASE + 0x20 + 9)
-
 #define	AT91_PIN_PB10	(PIN_BASE + 0x20 + 10)
 #define	AT91_PIN_PB11	(PIN_BASE + 0x20 + 11)
 #define	AT91_PIN_PB12	(PIN_BASE + 0x20 + 12)
 #define	AT91_PIN_PB13	(PIN_BASE + 0x20 + 13)
 #define	AT91_PIN_PB14	(PIN_BASE + 0x20 + 14)
-
 #define	AT91_PIN_PB15	(PIN_BASE + 0x20 + 15)
 #define	AT91_PIN_PB16	(PIN_BASE + 0x20 + 16)
 #define	AT91_PIN_PB17	(PIN_BASE + 0x20 + 17)
 #define	AT91_PIN_PB18	(PIN_BASE + 0x20 + 18)
 #define	AT91_PIN_PB19	(PIN_BASE + 0x20 + 19)
-
 #define	AT91_PIN_PB20	(PIN_BASE + 0x20 + 20)
 #define	AT91_PIN_PB21	(PIN_BASE + 0x20 + 21)
 #define	AT91_PIN_PB22	(PIN_BASE + 0x20 + 22)
 #define	AT91_PIN_PB23	(PIN_BASE + 0x20 + 23)
 #define	AT91_PIN_PB24	(PIN_BASE + 0x20 + 24)
-
 #define	AT91_PIN_PB25	(PIN_BASE + 0x20 + 25)
 #define	AT91_PIN_PB26	(PIN_BASE + 0x20 + 26)
 #define	AT91_PIN_PB27	(PIN_BASE + 0x20 + 27)
 #define	AT91_PIN_PB28	(PIN_BASE + 0x20 + 28)
 #define	AT91_PIN_PB29	(PIN_BASE + 0x20 + 29)
-
 #define	AT91_PIN_PB30	(PIN_BASE + 0x20 + 30)
 #define	AT91_PIN_PB31	(PIN_BASE + 0x20 + 31)
 
@@ -104,37 +92,31 @@
 #define	AT91_PIN_PC2	(PIN_BASE + 0x40 + 2)
 #define	AT91_PIN_PC3	(PIN_BASE + 0x40 + 3)
 #define	AT91_PIN_PC4	(PIN_BASE + 0x40 + 4)
-
 #define	AT91_PIN_PC5	(PIN_BASE + 0x40 + 5)
 #define	AT91_PIN_PC6	(PIN_BASE + 0x40 + 6)
 #define	AT91_PIN_PC7	(PIN_BASE + 0x40 + 7)
 #define	AT91_PIN_PC8	(PIN_BASE + 0x40 + 8)
 #define	AT91_PIN_PC9	(PIN_BASE + 0x40 + 9)
-
 #define	AT91_PIN_PC10	(PIN_BASE + 0x40 + 10)
 #define	AT91_PIN_PC11	(PIN_BASE + 0x40 + 11)
 #define	AT91_PIN_PC12	(PIN_BASE + 0x40 + 12)
 #define	AT91_PIN_PC13	(PIN_BASE + 0x40 + 13)
 #define	AT91_PIN_PC14	(PIN_BASE + 0x40 + 14)
-
 #define	AT91_PIN_PC15	(PIN_BASE + 0x40 + 15)
 #define	AT91_PIN_PC16	(PIN_BASE + 0x40 + 16)
 #define	AT91_PIN_PC17	(PIN_BASE + 0x40 + 17)
 #define	AT91_PIN_PC18	(PIN_BASE + 0x40 + 18)
 #define	AT91_PIN_PC19	(PIN_BASE + 0x40 + 19)
-
 #define	AT91_PIN_PC20	(PIN_BASE + 0x40 + 20)
 #define	AT91_PIN_PC21	(PIN_BASE + 0x40 + 21)
 #define	AT91_PIN_PC22	(PIN_BASE + 0x40 + 22)
 #define	AT91_PIN_PC23	(PIN_BASE + 0x40 + 23)
 #define	AT91_PIN_PC24	(PIN_BASE + 0x40 + 24)
-
 #define	AT91_PIN_PC25	(PIN_BASE + 0x40 + 25)
 #define	AT91_PIN_PC26	(PIN_BASE + 0x40 + 26)
 #define	AT91_PIN_PC27	(PIN_BASE + 0x40 + 27)
 #define	AT91_PIN_PC28	(PIN_BASE + 0x40 + 28)
 #define	AT91_PIN_PC29	(PIN_BASE + 0x40 + 29)
-
 #define	AT91_PIN_PC30	(PIN_BASE + 0x40 + 30)
 #define	AT91_PIN_PC31	(PIN_BASE + 0x40 + 31)
 
@@ -143,40 +125,67 @@
 #define	AT91_PIN_PD2	(PIN_BASE + 0x60 + 2)
 #define	AT91_PIN_PD3	(PIN_BASE + 0x60 + 3)
 #define	AT91_PIN_PD4	(PIN_BASE + 0x60 + 4)
-
 #define	AT91_PIN_PD5	(PIN_BASE + 0x60 + 5)
 #define	AT91_PIN_PD6	(PIN_BASE + 0x60 + 6)
 #define	AT91_PIN_PD7	(PIN_BASE + 0x60 + 7)
 #define	AT91_PIN_PD8	(PIN_BASE + 0x60 + 8)
 #define	AT91_PIN_PD9	(PIN_BASE + 0x60 + 9)
-
 #define	AT91_PIN_PD10	(PIN_BASE + 0x60 + 10)
 #define	AT91_PIN_PD11	(PIN_BASE + 0x60 + 11)
 #define	AT91_PIN_PD12	(PIN_BASE + 0x60 + 12)
 #define	AT91_PIN_PD13	(PIN_BASE + 0x60 + 13)
 #define	AT91_PIN_PD14	(PIN_BASE + 0x60 + 14)
-
 #define	AT91_PIN_PD15	(PIN_BASE + 0x60 + 15)
 #define	AT91_PIN_PD16	(PIN_BASE + 0x60 + 16)
 #define	AT91_PIN_PD17	(PIN_BASE + 0x60 + 17)
 #define	AT91_PIN_PD18	(PIN_BASE + 0x60 + 18)
 #define	AT91_PIN_PD19	(PIN_BASE + 0x60 + 19)
-
 #define	AT91_PIN_PD20	(PIN_BASE + 0x60 + 20)
 #define	AT91_PIN_PD21	(PIN_BASE + 0x60 + 21)
 #define	AT91_PIN_PD22	(PIN_BASE + 0x60 + 22)
 #define	AT91_PIN_PD23	(PIN_BASE + 0x60 + 23)
 #define	AT91_PIN_PD24	(PIN_BASE + 0x60 + 24)
-
 #define	AT91_PIN_PD25	(PIN_BASE + 0x60 + 25)
 #define	AT91_PIN_PD26	(PIN_BASE + 0x60 + 26)
 #define	AT91_PIN_PD27	(PIN_BASE + 0x60 + 27)
 #define	AT91_PIN_PD28	(PIN_BASE + 0x60 + 28)
 #define	AT91_PIN_PD29	(PIN_BASE + 0x60 + 29)
-
 #define	AT91_PIN_PD30	(PIN_BASE + 0x60 + 30)
 #define	AT91_PIN_PD31	(PIN_BASE + 0x60 + 31)
 
+#define	AT91_PIN_PE0	(PIN_BASE + 0x80 + 0)
+#define	AT91_PIN_PE1	(PIN_BASE + 0x80 + 1)
+#define	AT91_PIN_PE2	(PIN_BASE + 0x80 + 2)
+#define	AT91_PIN_PE3	(PIN_BASE + 0x80 + 3)
+#define	AT91_PIN_PE4	(PIN_BASE + 0x80 + 4)
+#define	AT91_PIN_PE5	(PIN_BASE + 0x80 + 5)
+#define	AT91_PIN_PE6	(PIN_BASE + 0x80 + 6)
+#define	AT91_PIN_PE7	(PIN_BASE + 0x80 + 7)
+#define	AT91_PIN_PE8	(PIN_BASE + 0x80 + 8)
+#define	AT91_PIN_PE9	(PIN_BASE + 0x80 + 9)
+#define	AT91_PIN_PE10	(PIN_BASE + 0x80 + 10)
+#define	AT91_PIN_PE11	(PIN_BASE + 0x80 + 11)
+#define	AT91_PIN_PE12	(PIN_BASE + 0x80 + 12)
+#define	AT91_PIN_PE13	(PIN_BASE + 0x80 + 13)
+#define	AT91_PIN_PE14	(PIN_BASE + 0x80 + 14)
+#define	AT91_PIN_PE15	(PIN_BASE + 0x80 + 15)
+#define	AT91_PIN_PE16	(PIN_BASE + 0x80 + 16)
+#define	AT91_PIN_PE17	(PIN_BASE + 0x80 + 17)
+#define	AT91_PIN_PE18	(PIN_BASE + 0x80 + 18)
+#define	AT91_PIN_PE19	(PIN_BASE + 0x80 + 19)
+#define	AT91_PIN_PE20	(PIN_BASE + 0x80 + 20)
+#define	AT91_PIN_PE21	(PIN_BASE + 0x80 + 21)
+#define	AT91_PIN_PE22	(PIN_BASE + 0x80 + 22)
+#define	AT91_PIN_PE23	(PIN_BASE + 0x80 + 23)
+#define	AT91_PIN_PE24	(PIN_BASE + 0x80 + 24)
+#define	AT91_PIN_PE25	(PIN_BASE + 0x80 + 25)
+#define	AT91_PIN_PE26	(PIN_BASE + 0x80 + 26)
+#define	AT91_PIN_PE27	(PIN_BASE + 0x80 + 27)
+#define	AT91_PIN_PE28	(PIN_BASE + 0x80 + 28)
+#define	AT91_PIN_PE29	(PIN_BASE + 0x80 + 29)
+#define	AT91_PIN_PE30	(PIN_BASE + 0x80 + 30)
+#define	AT91_PIN_PE31	(PIN_BASE + 0x80 + 31)
+
 #ifndef __ASSEMBLY__
 /* setup setup routines, called from board init or driver probe() */
 extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup);
diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h
index ccb7c72..1637fc4 100644
--- a/include/asm-arm/arch-at91/hardware.h
+++ b/include/asm-arm/arch-at91/hardware.h
@@ -28,15 +28,15 @@
 
 
 /*
- * Remap the peripherals from address 0xFFFA0000 .. 0xFFFFFFFF
- * to 0xFEFA0000 .. 0xFF000000.  (384Kb)
+ * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF
+ * to 0xFEF78000 .. 0xFF000000.  (5444Kb)
  */
-#define AT91_IO_PHYS_BASE	0xFFFA0000
+#define AT91_IO_PHYS_BASE	0xFFF78000
 #define AT91_IO_SIZE		(0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
 #define AT91_IO_VIRT_BASE	(0xFF000000 - AT91_IO_SIZE)
 
  /* Convert a physical IO address to virtual IO address */
-#define AT91_IO_P2V(x)	((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
+#define AT91_IO_P2V(x)		((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
 
 /*
  * Virtual to Physical Address mapping for IO devices.
diff --git a/include/asm-arm/arch-at91/irqs.h b/include/asm-arm/arch-at91/irqs.h
index f041c98..1ffa3bb 100644
--- a/include/asm-arm/arch-at91/irqs.h
+++ b/include/asm-arm/arch-at91/irqs.h
@@ -37,8 +37,8 @@
  * IRQ interrupt symbols are the AT91xxx_ID_* symbols
  * for IRQs handled directly through the AIC, or else the AT91_PIN_*
  * symbols in gpio.h for ones handled indirectly as GPIOs.
- * We make provision for 4 banks of GPIO.
+ * We make provision for 5 banks of GPIO.
  */
-#define	NR_IRQS		(NR_AIC_IRQS + (4 * 32))
+#define	NR_IRQS		(NR_AIC_IRQS + (5 * 32))
 
 #endif
-- 
cgit v1.1


From b2c6561605da4802886cafe96432b8e2968e9edc Mon Sep 17 00:00:00 2001
From: Andrew Victor <andrew@sanpeople.com>
Date: Thu, 8 Feb 2007 09:42:40 +0100
Subject: [ARM] 4145/2: AT91: Add support for AT91SAM9263 processor

Add support for the Atmel AT91SAM9263 processor.  It is similar to the
AT91SAM9260 but with more integrated peripherals, 5 GPIO banks, etc.

Original patch from Nicolas Ferre.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/Kconfig                     |   3 +
 arch/arm/mach-at91/Makefile                    |   1 +
 arch/arm/mach-at91/at91sam9263.c               | 313 ++++++++++
 arch/arm/mach-at91/at91sam9263_devices.c       | 818 +++++++++++++++++++++++++
 arch/arm/mach-at91/clock.c                     |   2 +-
 arch/arm/mach-at91/generic.h                   |   2 +
 arch/arm/mach-at91/pm.c                        |   2 +
 arch/arm/mm/Kconfig                            |   4 +-
 drivers/usb/gadget/at91_udc.c                  |   4 +-
 include/asm-arm/arch-at91/at91sam9263.h        | 131 ++++
 include/asm-arm/arch-at91/at91sam9263_matrix.h | 129 ++++
 include/asm-arm/arch-at91/at91sam926x_mc.h     |   7 +
 include/asm-arm/arch-at91/cpu.h                |   7 +
 include/asm-arm/arch-at91/hardware.h           |   2 +
 include/asm-arm/arch-at91/timex.h              |   5 +
 15 files changed, 1425 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/mach-at91/at91sam9263.c
 create mode 100644 arch/arm/mach-at91/at91sam9263_devices.c
 create mode 100644 include/asm-arm/arch-at91/at91sam9263.h
 create mode 100644 include/asm-arm/arch-at91/at91sam9263_matrix.h

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 9f11db8..2499385 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -14,6 +14,9 @@ config ARCH_AT91SAM9260
 config ARCH_AT91SAM9261
 	bool "AT91SAM9261"
 
+config ARCH_AT91SAM9263
+	bool "AT91SAM9263"
+
 endchoice
 
 # ----------------------------------------------------------
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index cf77700..2fd4cd4 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
 
 # AT91RM9200 board-specific support
 obj-$(CONFIG_MACH_ONEARM)	+= board-1arm.o
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
new file mode 100644
index 0000000..fae6a82
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -0,0 +1,313 @@
+/*
+ * arch/arm/mach-at91/at91sam9263.c
+ *
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91sam9263_io_desc[] __initdata = {
+	{
+		.virtual	= AT91_VA_BASE_SYS,
+		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9263_SRAM0_BASE),
+		.length		= AT91SAM9263_SRAM0_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE - AT91SAM9263_SRAM1_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9263_SRAM1_BASE),
+		.length		= AT91SAM9263_SRAM1_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+/* --------------------------------------------------------------------
+ *  Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+	.name		= "pioA_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_PIOA,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+	.name		= "pioB_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_PIOB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioCDE_clk = {
+	.name		= "pioCDE_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_PIOCDE,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+	.name		= "usart0_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_US0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+	.name		= "usart1_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_US1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+	.name		= "usart2_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_US2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc0_clk = {
+	.name		= "mci0_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_MCI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc1_clk = {
+	.name		= "mci1_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_MCI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi_clk = {
+	.name		= "twi_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_TWI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+	.name		= "spi0_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_SPI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+	.name		= "spi1_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_SPI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tcb_clk = {
+	.name		= "tcb_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_TCB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ether_clk = {
+	.name		= "ether_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_EMAC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk udc_clk = {
+	.name		= "udc_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_UDP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk isi_clk = {
+	.name		= "isi_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_ISI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+	.name		= "lcdc_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_ISI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+	.name		= "ohci_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_UHP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+	&pioA_clk,
+	&pioB_clk,
+	&pioCDE_clk,
+	&usart0_clk,
+	&usart1_clk,
+	&usart2_clk,
+	&mmc0_clk,
+	&mmc1_clk,
+	// can
+	&twi_clk,
+	&spi0_clk,
+	&spi1_clk,
+	// ssc0 .. ssc1
+	// ac97
+	&tcb_clk,
+	// pwmc
+	&ether_clk,
+	// 2dge
+	&udc_clk,
+	&isi_clk,
+	&lcdc_clk,
+	// dma
+	&ohci_clk,
+	// irq0 .. irq1
+};
+
+/*
+ * The four programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+	.name		= "pck0",
+	.pmc_mask	= AT91_PMC_PCK0,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 0,
+};
+static struct clk pck1 = {
+	.name		= "pck1",
+	.pmc_mask	= AT91_PMC_PCK1,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 1,
+};
+static struct clk pck2 = {
+	.name		= "pck2",
+	.pmc_mask	= AT91_PMC_PCK2,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 2,
+};
+static struct clk pck3 = {
+	.name		= "pck3",
+	.pmc_mask	= AT91_PMC_PCK3,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 3,
+};
+
+static void __init at91sam9263_register_clocks(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+		clk_register(periph_clocks[i]);
+
+	clk_register(&pck0);
+	clk_register(&pck1);
+	clk_register(&pck2);
+	clk_register(&pck3);
+}
+
+/* --------------------------------------------------------------------
+ *  GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91sam9263_gpio[] = {
+	{
+		.id		= AT91SAM9263_ID_PIOA,
+		.offset		= AT91_PIOA,
+		.clock		= &pioA_clk,
+	}, {
+		.id		= AT91SAM9263_ID_PIOB,
+		.offset		= AT91_PIOB,
+		.clock		= &pioB_clk,
+	}, {
+		.id		= AT91SAM9263_ID_PIOCDE,
+		.offset		= AT91_PIOC,
+		.clock		= &pioCDE_clk,
+	}, {
+		.id		= AT91SAM9263_ID_PIOCDE,
+		.offset		= AT91_PIOD,
+		.clock		= &pioCDE_clk,
+	}, {
+		.id		= AT91SAM9263_ID_PIOCDE,
+		.offset		= AT91_PIOE,
+		.clock		= &pioCDE_clk,
+	}
+};
+
+static void at91sam9263_reset(void)
+{
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+
+/* --------------------------------------------------------------------
+ *  AT91SAM9263 processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91sam9263_initialize(unsigned long main_clock)
+{
+	/* Map peripherals */
+	iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc));
+
+	at91_arch_reset = at91sam9263_reset;
+	at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
+
+	/* Init clock subsystem */
+	at91_clock_init(main_clock);
+
+	/* Register the processor-specific clocks */
+	at91sam9263_register_clocks();
+
+	/* Register GPIO subsystem */
+	at91_gpio_init(at91sam9263_gpio, 5);
+}
+
+/* --------------------------------------------------------------------
+ *  Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
+	7,	/* Advanced Interrupt Controller (FIQ) */
+	7,	/* System Peripherals */
+	0,	/* Parallel IO Controller A */
+	0,	/* Parallel IO Controller B */
+	0,	/* Parallel IO Controller C, D and E */
+	0,
+	0,
+	6,	/* USART 0 */
+	6,	/* USART 1 */
+	6,	/* USART 2 */
+	0,	/* Multimedia Card Interface 0 */
+	0,	/* Multimedia Card Interface 1 */
+	4,	/* CAN */
+	0,	/* Two-Wire Interface */
+	6,	/* Serial Peripheral Interface 0 */
+	6,	/* Serial Peripheral Interface 1 */
+	5,	/* Serial Synchronous Controller 0 */
+	5,	/* Serial Synchronous Controller 1 */
+	6,	/* AC97 Controller */
+	0,	/* Timer Counter 0, 1 and 2 */
+	0,	/* Pulse Width Modulation Controller */
+	3,	/* Ethernet */
+	0,
+	0,	/* 2D Graphic Engine */
+	3,	/* USB Device Port */
+	0,	/* Image Sensor Interface */
+	3,	/* LDC Controller */
+	0,	/* DMA Controller */
+	0,
+	3,	/* USB Host port */
+	0,	/* Advanced Interrupt Controller (IRQ0) */
+	0,	/* Advanced Interrupt Controller (IRQ1) */
+};
+
+void __init at91sam9263_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+	if (!priority)
+		priority = at91sam9263_default_irq_priority;
+
+	/* Initialize the AIC interrupt controller */
+	at91_aic_init(priority);
+
+	/* Enable GPIO interrupts */
+	at91_gpio_irq_setup();
+}
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
new file mode 100644
index 0000000..d9af7ca
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -0,0 +1,818 @@
+/*
+ * arch/arm/mach-at91/at91sam9263_devices.c
+ *
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_device.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/at91sam926x_mc.h>
+#include <asm/arch/at91sam9263_matrix.h>
+
+#include "generic.h"
+
+#define SZ_512	0x00000200
+#define SZ_256	0x00000100
+#define SZ_16	0x00000010
+
+/* --------------------------------------------------------------------
+ *  USB Host
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = 0xffffffffUL;
+static struct at91_usbh_data usbh_data;
+
+static struct resource usbh_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_UHP_BASE,
+		.end	= AT91SAM9263_UHP_BASE + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_UHP,
+		.end	= AT91SAM9263_ID_UHP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_usbh_device = {
+	.name		= "at91_ohci",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &ohci_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &usbh_data,
+	},
+	.resource	= usbh_resources,
+	.num_resources	= ARRAY_SIZE(usbh_resources),
+};
+
+void __init at91_add_device_usbh(struct at91_usbh_data *data)
+{
+	int i;
+
+	if (!data)
+		return;
+
+	/* Enable VBus control for UHP ports */
+	for (i = 0; i < data->ports; i++) {
+		if (data->vbus_pin[i])
+			at91_set_gpio_output(data->vbus_pin[i], 0);
+	}
+
+	usbh_data = *data;
+	platform_device_register(&at91_usbh_device);
+}
+#else
+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  USB Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_USB_GADGET_AT91
+static struct at91_udc_data udc_data;
+
+static struct resource udc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_UDP,
+		.end	= AT91SAM9263_BASE_UDP + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_UDP,
+		.end	= AT91SAM9263_ID_UDP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_udc_device = {
+	.name		= "at91_udc",
+	.id		= -1,
+	.dev		= {
+				.platform_data		= &udc_data,
+	},
+	.resource	= udc_resources,
+	.num_resources	= ARRAY_SIZE(udc_resources),
+};
+
+void __init at91_add_device_udc(struct at91_udc_data *data)
+{
+	if (!data)
+		return;
+
+	if (data->vbus_pin) {
+		at91_set_gpio_input(data->vbus_pin, 0);
+		at91_set_deglitch(data->vbus_pin, 1);
+	}
+
+	/* Pullup pin is handled internally by USB device peripheral */
+
+	udc_data = *data;
+	platform_device_register(&at91_udc_device);
+}
+#else
+void __init at91_add_device_udc(struct at91_udc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+static u64 eth_dmamask = 0xffffffffUL;
+static struct at91_eth_data eth_data;
+
+static struct resource eth_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_EMAC,
+		.end	= AT91SAM9263_BASE_EMAC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_EMAC,
+		.end	= AT91SAM9263_ID_EMAC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_eth_device = {
+	.name		= "macb",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &eth_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &eth_data,
+	},
+	.resource	= eth_resources,
+	.num_resources	= ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct at91_eth_data *data)
+{
+	if (!data)
+		return;
+
+	if (data->phy_irq_pin) {
+		at91_set_gpio_input(data->phy_irq_pin, 0);
+		at91_set_deglitch(data->phy_irq_pin, 1);
+	}
+
+	/* Pins used for MII and RMII */
+	at91_set_A_periph(AT91_PIN_PE21, 0);	/* ETXCK_EREFCK */
+	at91_set_B_periph(AT91_PIN_PC25, 0);	/* ERXDV */
+	at91_set_A_periph(AT91_PIN_PE25, 0);	/* ERX0 */
+	at91_set_A_periph(AT91_PIN_PE26, 0);	/* ERX1 */
+	at91_set_A_periph(AT91_PIN_PE27, 0);	/* ERXER */
+	at91_set_A_periph(AT91_PIN_PE28, 0);	/* ETXEN */
+	at91_set_A_periph(AT91_PIN_PE23, 0);	/* ETX0 */
+	at91_set_A_periph(AT91_PIN_PE24, 0);	/* ETX1 */
+	at91_set_A_periph(AT91_PIN_PE30, 0);	/* EMDIO */
+	at91_set_A_periph(AT91_PIN_PE29, 0);	/* EMDC */
+
+	if (!data->is_rmii) {
+		at91_set_A_periph(AT91_PIN_PE22, 0);	/* ECRS */
+		at91_set_B_periph(AT91_PIN_PC26, 0);	/* ECOL */
+		at91_set_B_periph(AT91_PIN_PC22, 0);	/* ERX2 */
+		at91_set_B_periph(AT91_PIN_PC23, 0);	/* ERX3 */
+		at91_set_B_periph(AT91_PIN_PC27, 0);	/* ERXCK */
+		at91_set_B_periph(AT91_PIN_PC20, 0);	/* ETX2 */
+		at91_set_B_periph(AT91_PIN_PC21, 0);	/* ETX3 */
+		at91_set_B_periph(AT91_PIN_PC24, 0);	/* ETXER */
+	}
+
+	eth_data = *data;
+	platform_device_register(&at91sam9263_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = 0xffffffffUL;
+static struct at91_mmc_data mmc0_data, mmc1_data;
+
+static struct resource mmc0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_MCI0,
+		.end	= AT91SAM9263_BASE_MCI0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_MCI0,
+		.end	= AT91SAM9263_ID_MCI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_mmc0_device = {
+	.name		= "at91_mci",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &mmc_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &mmc0_data,
+	},
+	.resource	= mmc0_resources,
+	.num_resources	= ARRAY_SIZE(mmc0_resources),
+};
+
+static struct resource mmc1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_MCI1,
+		.end	= AT91SAM9263_BASE_MCI1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_MCI1,
+		.end	= AT91SAM9263_ID_MCI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_mmc1_device = {
+	.name		= "at91_mci",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &mmc_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &mmc1_data,
+	},
+	.resource	= mmc1_resources,
+	.num_resources	= ARRAY_SIZE(mmc1_resources),
+};
+
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+{
+	if (!data)
+		return;
+
+	/* input/irq */
+	if (data->det_pin) {
+		at91_set_gpio_input(data->det_pin, 1);
+		at91_set_deglitch(data->det_pin, 1);
+	}
+	if (data->wp_pin)
+		at91_set_gpio_input(data->wp_pin, 1);
+	if (data->vcc_pin)
+		at91_set_gpio_output(data->vcc_pin, 0);
+
+	if (mmc_id == 0) {		/* MCI0 */
+		/* CLK */
+		at91_set_A_periph(AT91_PIN_PA12, 0);
+
+		if (data->slot_b) {
+			/* CMD */
+			at91_set_A_periph(AT91_PIN_PA16, 1);
+
+			/* DAT0, maybe DAT1..DAT3 */
+			at91_set_A_periph(AT91_PIN_PA17, 1);
+			if (data->wire4) {
+				at91_set_A_periph(AT91_PIN_PA18, 1);
+				at91_set_A_periph(AT91_PIN_PA19, 1);
+				at91_set_A_periph(AT91_PIN_PA20, 1);
+			}
+		} else {
+			/* CMD */
+			at91_set_A_periph(AT91_PIN_PA1, 1);
+
+			/* DAT0, maybe DAT1..DAT3 */
+			at91_set_A_periph(AT91_PIN_PA0, 1);
+			if (data->wire4) {
+				at91_set_A_periph(AT91_PIN_PA3, 1);
+				at91_set_A_periph(AT91_PIN_PA4, 1);
+				at91_set_A_periph(AT91_PIN_PA5, 1);
+			}
+		}
+
+		mmc0_data = *data;
+		at91_clock_associate("mci0_clk", &at91sam9263_mmc1_device.dev, "mci_clk");
+		platform_device_register(&at91sam9263_mmc0_device);
+	} else {			/* MCI1 */
+		/* CLK */
+		at91_set_A_periph(AT91_PIN_PA6, 0);
+
+		if (data->slot_b) {
+			/* CMD */
+			at91_set_A_periph(AT91_PIN_PA21, 1);
+
+			/* DAT0, maybe DAT1..DAT3 */
+			at91_set_A_periph(AT91_PIN_PA22, 1);
+			if (data->wire4) {
+				at91_set_A_periph(AT91_PIN_PA23, 1);
+				at91_set_A_periph(AT91_PIN_PA24, 1);
+				at91_set_A_periph(AT91_PIN_PA25, 1);
+			}
+		} else {
+			/* CMD */
+			at91_set_A_periph(AT91_PIN_PA7, 1);
+
+			/* DAT0, maybe DAT1..DAT3 */
+			at91_set_A_periph(AT91_PIN_PA8, 1);
+			if (data->wire4) {
+				at91_set_A_periph(AT91_PIN_PA9, 1);
+				at91_set_A_periph(AT91_PIN_PA10, 1);
+				at91_set_A_periph(AT91_PIN_PA11, 1);
+			}
+		}
+
+		mmc1_data = *data;
+		at91_clock_associate("mci1_clk", &at91sam9263_mmc1_device.dev, "mci_clk");
+		platform_device_register(&at91sam9263_mmc1_device);
+	}
+}
+#else
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+static struct at91_nand_data nand_data;
+
+#define NAND_BASE	AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+	{
+		.start	= NAND_BASE,
+		.end	= NAND_BASE + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device at91sam9263_nand_device = {
+	.name		= "at91_nand",
+	.id		= -1,
+	.dev		= {
+				.platform_data	= &nand_data,
+	},
+	.resource	= nand_resources,
+	.num_resources	= ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct at91_nand_data *data)
+{
+	unsigned long csa, mode;
+
+	if (!data)
+		return;
+
+	csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+	at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC);
+
+	/* set the bus interface characteristics */
+	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
+			| AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+
+	at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
+			| AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
+
+	at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+
+	if (data->bus_width_16)
+		mode = AT91_SMC_DBW_16;
+	else
+		mode = AT91_SMC_DBW_8;
+	at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
+
+	/* enable pin */
+	if (data->enable_pin)
+		at91_set_gpio_output(data->enable_pin, 1);
+
+	/* ready/busy pin */
+	if (data->rdy_pin)
+		at91_set_gpio_input(data->rdy_pin, 1);
+
+	/* card detect pin */
+	if (data->det_pin)
+		at91_set_gpio_input(data->det_pin, 1);
+
+	nand_data = *data;
+	platform_device_register(&at91sam9263_nand_device);
+}
+#else
+void __init at91_add_device_nand(struct at91_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_TWI,
+		.end	= AT91SAM9263_BASE_TWI + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_TWI,
+		.end	= AT91SAM9263_ID_TWI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_twi_device = {
+	.name		= "at91_i2c",
+	.id		= -1,
+	.resource	= twi_resources,
+	.num_resources	= ARRAY_SIZE(twi_resources),
+};
+
+void __init at91_add_device_i2c(void)
+{
+	/* pins used for TWI interface */
+	at91_set_A_periph(AT91_PIN_PB4, 0);		/* TWD */
+	at91_set_multi_drive(AT91_PIN_PB4, 1);
+
+	at91_set_A_periph(AT91_PIN_PB5, 0);		/* TWCK */
+	at91_set_multi_drive(AT91_PIN_PB5, 1);
+
+	platform_device_register(&at91sam9263_twi_device);
+}
+#else
+void __init at91_add_device_i2c(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = 0xffffffffUL;
+
+static struct resource spi0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_SPI0,
+		.end	= AT91SAM9263_BASE_SPI0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_SPI0,
+		.end	= AT91SAM9263_ID_SPI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_spi0_device = {
+	.name		= "atmel_spi",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+	},
+	.resource	= spi0_resources,
+	.num_resources	= ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PB11 };
+
+static struct resource spi1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_SPI1,
+		.end	= AT91SAM9263_BASE_SPI1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_SPI1,
+		.end	= AT91SAM9263_ID_SPI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_spi1_device = {
+	.name		= "atmel_spi",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+	},
+	.resource	= spi1_resources,
+	.num_resources	= ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+	int i;
+	unsigned long cs_pin;
+	short enable_spi0 = 0;
+	short enable_spi1 = 0;
+
+	/* Choose SPI chip-selects */
+	for (i = 0; i < nr_devices; i++) {
+		if (devices[i].controller_data)
+			cs_pin = (unsigned long) devices[i].controller_data;
+		else if (devices[i].bus_num == 0)
+			cs_pin = spi0_standard_cs[devices[i].chip_select];
+		else
+			cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+		if (devices[i].bus_num == 0)
+			enable_spi0 = 1;
+		else
+			enable_spi1 = 1;
+
+		/* enable chip-select pin */
+		at91_set_gpio_output(cs_pin, 1);
+
+		/* pass chip-select pin to driver */
+		devices[i].controller_data = (void *) cs_pin;
+	}
+
+	spi_register_board_info(devices, nr_devices);
+
+	/* Configure SPI bus(es) */
+	if (enable_spi0) {
+		at91_set_B_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
+		at91_set_B_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
+		at91_set_B_periph(AT91_PIN_PA2, 0);	/* SPI1_SPCK */
+
+		at91_clock_associate("spi0_clk", &at91sam9263_spi0_device.dev, "spi_clk");
+		platform_device_register(&at91sam9263_spi0_device);
+	}
+	if (enable_spi1) {
+		at91_set_A_periph(AT91_PIN_PB12, 0);	/* SPI1_MISO */
+		at91_set_A_periph(AT91_PIN_PB13, 0);	/* SPI1_MOSI */
+		at91_set_A_periph(AT91_PIN_PB14, 0);	/* SPI1_SPCK */
+
+		at91_clock_associate("spi1_clk", &at91sam9263_spi1_device.dev, "spi_clk");
+		platform_device_register(&at91sam9263_spi1_device);
+	}
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  LEDs
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_LEDS)
+u8 at91_leds_cpu;
+u8 at91_leds_timer;
+
+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+{
+	/* Enable GPIO to access the LEDs */
+	at91_set_gpio_output(cpu_led, 1);
+	at91_set_gpio_output(timer_led, 1);
+
+	at91_leds_cpu	= cpu_led;
+	at91_leds_timer	= timer_led;
+}
+#else
+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+
+static struct resource dbgu_resources[] = {
+	[0] = {
+		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
+		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_ID_SYS,
+		.end	= AT91_ID_SYS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data dbgu_data = {
+	.use_dma_tx	= 0,
+	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
+	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static struct platform_device at91sam9263_dbgu_device = {
+	.name		= "atmel_usart",
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &dbgu_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= dbgu_resources,
+	.num_resources	= ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PC30, 0);		/* DRXD */
+	at91_set_A_periph(AT91_PIN_PC31, 1);		/* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_US0,
+		.end	= AT91SAM9263_BASE_US0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_US0,
+		.end	= AT91SAM9263_ID_US0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart0_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9263_uart0_device = {
+	.name		= "atmel_usart",
+	.id		= 1,
+	.dev		= {
+				.platform_data	= &uart0_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart0_resources,
+	.num_resources	= ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PA26, 1);		/* TXD0 */
+	at91_set_A_periph(AT91_PIN_PA27, 0);		/* RXD0 */
+	at91_set_A_periph(AT91_PIN_PA28, 0);		/* RTS0 */
+	at91_set_A_periph(AT91_PIN_PA29, 0);		/* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_US1,
+		.end	= AT91SAM9263_BASE_US1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_US1,
+		.end	= AT91SAM9263_ID_US1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart1_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9263_uart1_device = {
+	.name		= "atmel_usart",
+	.id		= 2,
+	.dev		= {
+				.platform_data	= &uart1_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart1_resources,
+	.num_resources	= ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PD0, 1);		/* TXD1 */
+	at91_set_A_periph(AT91_PIN_PD1, 0);		/* RXD1 */
+	at91_set_B_periph(AT91_PIN_PD7, 0);		/* RTS1 */
+	at91_set_B_periph(AT91_PIN_PD8, 0);		/* CTS1 */
+}
+
+static struct resource uart2_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_US2,
+		.end	= AT91SAM9263_BASE_US2 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_US2,
+		.end	= AT91SAM9263_ID_US2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart2_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9263_uart2_device = {
+	.name		= "atmel_usart",
+	.id		= 3,
+	.dev		= {
+				.platform_data	= &uart2_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart2_resources,
+	.num_resources	= ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PD2, 1);		/* TXD2 */
+	at91_set_A_periph(AT91_PIN_PD3, 0);		/* RXD2 */
+	at91_set_B_periph(AT91_PIN_PD5, 0);		/* RTS2 */
+	at91_set_B_periph(AT91_PIN_PD6, 0);		/* CTS2 */
+}
+
+struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
+struct platform_device *atmel_default_console_device;	/* the serial console device */
+
+void __init at91_init_serial(struct at91_uart_config *config)
+{
+	int i;
+
+	/* Fill in list of supported UARTs */
+	for (i = 0; i < config->nr_tty; i++) {
+		switch (config->tty_map[i]) {
+			case 0:
+				configure_usart0_pins();
+				at91_uarts[i] = &at91sam9263_uart0_device;
+				at91_clock_associate("usart0_clk", &at91sam9263_uart0_device.dev, "usart");
+				break;
+			case 1:
+				configure_usart1_pins();
+				at91_uarts[i] = &at91sam9263_uart1_device;
+				at91_clock_associate("usart1_clk", &at91sam9263_uart1_device.dev, "usart");
+				break;
+			case 2:
+				configure_usart2_pins();
+				at91_uarts[i] = &at91sam9263_uart2_device;
+				at91_clock_associate("usart2_clk", &at91sam9263_uart2_device.dev, "usart");
+				break;
+			case 3:
+				configure_dbgu_pins();
+				at91_uarts[i] = &at91sam9263_dbgu_device;
+				at91_clock_associate("mck", &at91sam9263_dbgu_device.dev, "usart");
+				break;
+			default:
+				continue;
+		}
+		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
+	}
+
+	/* Set serial console device */
+	if (config->console_tty < ATMEL_MAX_UART)
+		atmel_default_console_device = at91_uarts[config->console_tty];
+	if (!atmel_default_console_device)
+		printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+void __init at91_add_device_serial(void)
+{
+	int i;
+
+	for (i = 0; i < ATMEL_MAX_UART; i++) {
+		if (at91_uarts[i])
+			platform_device_register(at91_uarts[i]);
+	}
+}
+#else
+void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+	return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index baab095..27e7279b 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -598,7 +598,7 @@ int __init at91_clock_init(unsigned long main_clock)
 		udpck.pmc_mask = AT91RM9200_PMC_UDP;
 		at91_sys_write(AT91_PMC_SCDR, AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP);
 		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
-	} else if (cpu_is_at91sam9260()) {
+	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) {
 		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
 		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
 		at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP);
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 10ee37b..bda2622 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -12,11 +12,13 @@
 extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks);
 extern void __init at91sam9260_initialize(unsigned long main_clock);
 extern void __init at91sam9261_initialize(unsigned long main_clock);
+extern void __init at91sam9263_initialize(unsigned long main_clock);
 
  /* Interrupts */
 extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
+extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
 extern void __init at91_aic_init(unsigned int priority[]);
 
  /* Timer */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index e095b1f..b49bfda 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -80,6 +80,8 @@ static int at91_pm_verify_clocks(void)
 #warning "Check SAM9260 USB clocks"
 	} else if (cpu_is_at91sam9261()) {
 #warning "Check SAM9261 USB clocks"
+	} else if (cpu_is_at91sam9263()) {
+#warning "Check SAM9263 USB clocks"
 	}
 
 #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index aade2f7..b305cbd 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -171,8 +171,8 @@ config CPU_ARM925T
 # ARM926T
 config CPU_ARM926T
 	bool "Support ARM926T processor"
-	depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
-	default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
+	depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263
+	default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263
 	select CPU_32v5
 	select CPU_ABRT_EV5TJ
 	select CPU_CACHE_VIVT
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 812c733..8afecb8 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -913,7 +913,7 @@ static void pullup(struct at91_udc *udc, int is_on)
 		at91_udp_write(udc, AT91_UDP_TXVC, 0);
 		if (cpu_is_at91rm9200())
 			at91_set_gpio_value(udc->board.pullup_pin, 1);
-		else if (cpu_is_at91sam9260()) {
+		else if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) {
 			u32	txvc = at91_udp_read(udc, AT91_UDP_TXVC);
 
 			txvc |= AT91_UDP_TXVC_PUON;
@@ -930,7 +930,7 @@ static void pullup(struct at91_udc *udc, int is_on)
 		at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
 		if (cpu_is_at91rm9200())
 			at91_set_gpio_value(udc->board.pullup_pin, 0);
-		else if (cpu_is_at91sam9260()) {
+		else if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) {
 			u32	txvc = at91_udp_read(udc, AT91_UDP_TXVC);
 
 			txvc &= ~AT91_UDP_TXVC_PUON;
diff --git a/include/asm-arm/arch-at91/at91sam9263.h b/include/asm-arm/arch-at91/at91sam9263.h
new file mode 100644
index 0000000..f4af68a
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91sam9263.h
@@ -0,0 +1,131 @@
+/*
+ * include/asm-arm/arch-at91/at91sam9263.h
+ *
+ * (C) 2007 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9263_H
+#define AT91SAM9263_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripherals */
+#define AT91SAM9263_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91SAM9263_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91SAM9263_ID_PIOCDE	4	/* Parallel IO Controller C, D and E */
+#define AT91SAM9263_ID_US0	7	/* USART 0 */
+#define AT91SAM9263_ID_US1	8	/* USART 1 */
+#define AT91SAM9263_ID_US2	9	/* USART 2 */
+#define AT91SAM9263_ID_MCI0	10	/* Multimedia Card Interface 0 */
+#define AT91SAM9263_ID_MCI1	11	/* Multimedia Card Interface 1 */
+#define AT91SAM9263_ID_CAN	12	/* CAN */
+#define AT91SAM9263_ID_TWI	13	/* Two-Wire Interface */
+#define AT91SAM9263_ID_SPI0	14	/* Serial Peripheral Interface 0 */
+#define AT91SAM9263_ID_SPI1	15	/* Serial Peripheral Interface 1 */
+#define AT91SAM9263_ID_SSC0	16	/* Serial Synchronous Controller 0 */
+#define AT91SAM9263_ID_SSC1	17	/* Serial Synchronous Controller 1 */
+#define AT91SAM9263_ID_AC97C	18	/* AC97 Controller */
+#define AT91SAM9263_ID_TCB	19	/* Timer Counter 0, 1 and 2 */
+#define AT91SAM9263_ID_PWMC	20	/* Pulse Width Modulation Controller */
+#define AT91SAM9263_ID_EMAC	21	/* Ethernet */
+#define AT91SAM9263_ID_2DGE	23	/* 2D Graphic Engine */
+#define AT91SAM9263_ID_UDP	24	/* USB Device Port */
+#define AT91SAM9263_ID_ISI	25	/* Image Sensor Interface */
+#define AT91SAM9263_ID_LCDC	26	/* LCD Controller */
+#define AT91SAM9263_ID_DMA	27	/* DMA Controller */
+#define AT91SAM9263_ID_UHP	29	/* USB Host port */
+#define AT91SAM9263_ID_IRQ0	30	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9263_ID_IRQ1	31	/* Advanced Interrupt Controller (IRQ1) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9263_BASE_UDP		0xfff78000
+#define AT91SAM9263_BASE_TCB0		0xfff7c000
+#define AT91SAM9263_BASE_TC0		0xfff7c000
+#define AT91SAM9263_BASE_TC1		0xfff7c040
+#define AT91SAM9263_BASE_TC2		0xfff7c080
+#define AT91SAM9263_BASE_MCI0		0xfff80000
+#define AT91SAM9263_BASE_MCI1		0xfff84000
+#define AT91SAM9263_BASE_TWI		0xfff88000
+#define AT91SAM9263_BASE_US0		0xfff8c000
+#define AT91SAM9263_BASE_US1		0xfff90000
+#define AT91SAM9263_BASE_US2		0xfff94000
+#define AT91SAM9263_BASE_SSC0		0xfff98000
+#define AT91SAM9263_BASE_SSC1		0xfff9c000
+#define AT91SAM9263_BASE_AC97C		0xfffa0000
+#define AT91SAM9263_BASE_SPI0		0xfffa4000
+#define AT91SAM9263_BASE_SPI1		0xfffa8000
+#define AT91SAM9263_BASE_CAN		0xfffac000
+#define AT91SAM9263_BASE_PWMC		0xfffb8000
+#define AT91SAM9263_BASE_EMAC		0xfffbc000
+#define AT91SAM9263_BASE_ISI		0xfffc4000
+#define AT91SAM9263_BASE_2DGE		0xfffc8000
+#define AT91_BASE_SYS			0xffffe000
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC0	(0xffffe000 - AT91_BASE_SYS)
+#define AT91_SDRAMC0	(0xffffe200 - AT91_BASE_SYS)
+#define AT91_SMC0	(0xffffe400 - AT91_BASE_SYS)
+#define AT91_ECC1	(0xffffe600 - AT91_BASE_SYS)
+#define AT91_SDRAMC1	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_SMC1	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_CCFG	(0xffffed10 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOE	(0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT0	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_RTT1	(0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
+
+#define AT91_SMC	AT91_SMC0
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9263_SRAM0_BASE	0x00300000	/* Internal SRAM 0 base address */
+#define AT91SAM9263_SRAM0_SIZE	(80 * SZ_1K)	/* Internal SRAM 0 size (80Kb) */
+
+#define AT91SAM9263_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91SAM9263_ROM_SIZE	SZ_128K		/* Internal ROM size (128Kb) */
+
+#define AT91SAM9263_SRAM1_BASE	0x00500000	/* Internal SRAM 1 base address */
+#define AT91SAM9263_SRAM1_SIZE	SZ_16K		/* Internal SRAM 1 size (16Kb) */
+
+#define AT91SAM9263_LCDC_BASE	0x00700000	/* LCD Controller */
+#define AT91SAM9263_DMAC_BASE	0x00800000	/* DMA Controller */
+#define AT91SAM9263_UHP_BASE	0x00a00000	/* USB Host controller */
+
+#if 0
+/*
+ * PIO pin definitions (peripheral A/B multiplexing).
+ */
+
+// TODO: Add
+
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91sam9263_matrix.h b/include/asm-arm/arch-at91/at91sam9263_matrix.h
new file mode 100644
index 0000000..6fc6e4b
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91sam9263_matrix.h
@@ -0,0 +1,129 @@
+/*
+ * include/asm-arm/arch-at91/at91sam9263_matrix.h
+ *
+ *  Copyright (C) 2006 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9263_MATRIX_H
+#define AT91SAM9263_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6	(AT91_MATRIX + 0x18)	/* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7	(AT91_MATRIX + 0x1C)	/* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8	(AT91_MATRIX + 0x20)	/* Master Configuration Register 8 */
+#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6	(AT91_MATRIX + 0x58)	/* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7	(AT91_MATRIX + 0x5C)	/* Slave Configuration Register 7 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
+#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
+#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
+#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0	(AT91_MATRIX + 0x84)	/* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1	(AT91_MATRIX + 0x8C)	/* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2	(AT91_MATRIX + 0x94)	/* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3	(AT91_MATRIX + 0x9C)	/* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4	(AT91_MATRIX + 0xA4)	/* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5	(AT91_MATRIX + 0xAC)	/* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6	(AT91_MATRIX + 0xB0)	/* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6	(AT91_MATRIX + 0xB4)	/* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7	(AT91_MATRIX + 0xB8)	/* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7	(AT91_MATRIX + 0xBC)	/* Priority Register B for Slave 7 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
+#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
+#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define		AT91_MATRIX_RCB2		(1 << 2)
+#define		AT91_MATRIX_RCB3		(1 << 3)
+#define		AT91_MATRIX_RCB4		(1 << 4)
+#define		AT91_MATRIX_RCB5		(1 << 5)
+#define		AT91_MATRIX_RCB6		(1 << 6)
+#define		AT91_MATRIX_RCB7		(1 << 7)
+#define		AT91_MATRIX_RCB8		(1 << 8)
+
+#define AT91_MATRIX_TCMR	(AT91_MATRIX + 0x114)	/* TCM Configuration Register */
+#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
+#define			AT91_MATRIX_ITCM_0		(0 << 0)
+#define			AT91_MATRIX_ITCM_16		(5 << 0)
+#define			AT91_MATRIX_ITCM_32		(6 << 0)
+#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
+#define			AT91_MATRIX_DTCM_0		(0 << 4)
+#define			AT91_MATRIX_DTCM_16		(5 << 4)
+#define			AT91_MATRIX_DTCM_32		(6 << 4)
+
+#define AT91_MATRIX_EBI0CSA	(AT91_MATRIX + 0x120)	/* EBI0 Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI0_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI0_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI0_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI0_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI0_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_EBI0_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_EBI0_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_EBI0_CS4A_SMC_CF1		(1 << 4)
+#define		AT91_MATRIX_EBI0_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_EBI0_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_EBI0_CS5A_SMC_CF2		(1 << 5)
+#define		AT91_MATRIX_EBI0_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_EBI0_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI0_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI0_VDDIOMSEL_3_3V		(1 << 16)
+
+#define AT91_MATRIX_EBI1CSA	(AT91_MATRIX + 0x124)	/* EBI1 Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI1_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI1_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI1_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI1_CS2A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI1_CS2A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_EBI1_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_EBI1_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI1_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI1_VDDIOMSEL_3_3V		(1 << 16)
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91sam926x_mc.h b/include/asm-arm/arch-at91/at91sam926x_mc.h
index 355eee6..d82631c 100644
--- a/include/asm-arm/arch-at91/at91sam926x_mc.h
+++ b/include/asm-arm/arch-at91/at91sam926x_mc.h
@@ -131,4 +131,11 @@
 #define			AT91_SMC_PS_16			(2 << 28)
 #define			AT91_SMC_PS_32			(3 << 28)
 
+#if defined(AT91_SMC1)		/* The AT91SAM9263 has 2 Static Memory contollers */
+#define AT91_SMC1_SETUP(n)	(AT91_SMC1 + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
+#define AT91_SMC1_PULSE(n)	(AT91_SMC1 + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
+#define AT91_SMC1_CYCLE(n)	(AT91_SMC1 + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
+#define AT91_SMC1_MODE(n)	(AT91_SMC1 + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
+#endif
+
 #endif
diff --git a/include/asm-arm/arch-at91/cpu.h b/include/asm-arm/arch-at91/cpu.h
index 762eb41..9efde0d 100644
--- a/include/asm-arm/arch-at91/cpu.h
+++ b/include/asm-arm/arch-at91/cpu.h
@@ -20,6 +20,7 @@
 #define ARCH_ID_AT91RM9200	0x09290780
 #define ARCH_ID_AT91SAM9260	0x019803a0
 #define ARCH_ID_AT91SAM9261	0x019703a0
+#define ARCH_ID_AT91SAM9263	0x019607a0
 
 
 static inline unsigned long at91_cpu_identify(void)
@@ -46,4 +47,10 @@ static inline unsigned long at91_cpu_identify(void)
 #define cpu_is_at91sam9261()	(0)
 #endif
 
+#ifdef CONFIG_ARCH_AT91SAM9263
+#define cpu_is_at91sam9263()	(at91_cpu_identify() == ARCH_ID_AT91SAM9263)
+#else
+#define cpu_is_at91sam9263()	(0)
+#endif
+
 #endif
diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h
index 1637fc4..eaaf1c1 100644
--- a/include/asm-arm/arch-at91/hardware.h
+++ b/include/asm-arm/arch-at91/hardware.h
@@ -22,6 +22,8 @@
 #include <asm/arch/at91sam9260.h>
 #elif defined(CONFIG_ARCH_AT91SAM9261)
 #include <asm/arch/at91sam9261.h>
+#elif defined(CONFIG_ARCH_AT91SAM9263)
+#include <asm/arch/at91sam9263.h>
 #else
 #error "Unsupported AT91 processor"
 #endif
diff --git a/include/asm-arm/arch-at91/timex.h b/include/asm-arm/arch-at91/timex.h
index b24e364..f41636d 100644
--- a/include/asm-arm/arch-at91/timex.h
+++ b/include/asm-arm/arch-at91/timex.h
@@ -32,6 +32,11 @@
 #define AT91SAM9_MASTER_CLOCK	99300000
 #define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
 
+#elif defined(CONFIG_ARCH_AT91SAM9263)
+
+#define AT91SAM9_MASTER_CLOCK	99959500
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
 #endif
 
 #endif
-- 
cgit v1.1


From e6d92e6397634ac7d2e80b16c52f0dfab9b673b4 Mon Sep 17 00:00:00 2001
From: Andrew Victor <andrew@sanpeople.com>
Date: Thu, 8 Feb 2007 10:22:16 +0100
Subject: [ARM] 4146/1: AT91: Support for AT91SAM9263-EK board.

Add support for the Atmel AT91SAM9263-EK board.

Original patch from Nicolas Ferre.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/at91sam9263ek_defconfig | 1184 ++++++++++++++++++++++++++++++
 arch/arm/mach-at91/Kconfig               |   19 +-
 arch/arm/mach-at91/Makefile              |    3 +
 arch/arm/mach-at91/board-sam9263ek.c     |  176 +++++
 4 files changed, 1380 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/configs/at91sam9263ek_defconfig
 create mode 100644 arch/arm/mach-at91/board-sam9263ek.c

diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig
new file mode 100644
index 0000000..c72ab82
--- /dev/null
+++ b/arch/arm/configs/at91sam9263ek_defconfig
@@ -0,0 +1,1184 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20-rc1
+# Mon Jan  8 16:06:54 2007
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+CONFIG_ARCH_AT91SAM9263=y
+
+#
+# AT91SAM9263 Board Type
+#
+CONFIG_MACH_AT91SAM9263EK=y
+
+#
+# AT91 Board Options
+#
+CONFIG_MTD_AT91_DATAFLASH_CARD=y
+# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_AT91=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=240
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_AT91=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ETH is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_AT91=m
+# CONFIG_MMC_TIFM_SD is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 2499385..9313888 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -121,17 +121,32 @@ endif
 
 # ----------------------------------------------------------
 
+if ARCH_AT91SAM9263
+
+comment "AT91SAM9263 Board Type"
+
+config MACH_AT91SAM9263EK
+	bool "Atmel AT91SAM9263-EK Evaluation Kit"
+	depends on ARCH_AT91SAM9263
+	help
+	  Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
+
+endif
+
+# ----------------------------------------------------------
+
 comment "AT91 Board Options"
 
 config MTD_AT91_DATAFLASH_CARD
 	bool "Enable DataFlash Card support"
-	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK)
+	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
 	help
 	  Enable support for the DataFlash card.
 
 config MTD_NAND_AT91_BUSWIDTH_16
 	bool "Enable 16-bit data bus interface to NAND flash"
-	depends on (MACH_AT91SAM9261EK || MACH_AT91SAM9260EK)
+	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
 	help
 	  On AT91SAM926x boards both types of NAND flash can be present
 	  (8 and 16 bit data bus width).
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 2fd4cd4..05de6cd 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -32,6 +32,9 @@ obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
 # AT91SAM9261 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
 
+# AT91SAM9263 board-specific support
+obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
+
 # LEDs support
 led-$(CONFIG_ARCH_AT91RM9200DK)	+= leds.o
 led-$(CONFIG_MACH_AT91RM9200EK)	+= leds.o
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
new file mode 100644
index 0000000..8fdce11
--- /dev/null
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -0,0 +1,176 @@
+/*
+ * linux/arch/arm/mach-at91/board-sam9263ek.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam926x_mc.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ *    0 .. 2 = USART0 .. USART2
+ *    3      = DBGU
+ */
+static struct at91_uart_config __initdata ek_uart_config = {
+	.console_tty	= 0,				/* ttyS0 */
+	.nr_tty		= 2,
+	.tty_map	= { 3, 0, -1, -1, }		/* ttyS0, ..., ttyS3 */
+};
+
+static void __init ek_map_io(void)
+{
+	/* Initialize processor: 16.367 MHz crystal */
+	at91sam9263_initialize(16367660);
+
+	/* Setup the serial ports and console */
+	at91_init_serial(&ek_uart_config);
+}
+
+static void __init ek_init_irq(void)
+{
+	at91sam9263_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+	.ports		= 2,
+	.vbus_pin	= { AT91_PIN_PA24, AT91_PIN_PA21 },
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+	.vbus_pin	= AT91_PIN_PA25,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+	{	/* DataFlash card */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+#endif
+};
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata ek_mmc_data = {
+	.wire4		= 1,
+	.det_pin	= AT91_PIN_PE18,
+	.wp_pin		= AT91_PIN_PE19,
+//	.vcc_pin	= ... not connected
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+	{
+		.name	= "Partition 1",
+		.offset	= 0,
+		.size	= 64 * 1024 * 1024,
+	},
+	{
+		.name	= "Partition 2",
+		.offset	= 64 * 1024 * 1024,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(ek_nand_partition);
+	return ek_nand_partition;
+}
+
+static struct at91_nand_data __initdata ek_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+//	.det_pin	= ... not connected
+	.rdy_pin	= AT91_PIN_PA22,
+	.enable_pin	= AT91_PIN_PD15,
+	.partition_info	= nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+	.bus_width_16	= 1,
+#else
+	.bus_width_16	= 0,
+#endif
+};
+
+
+static void __init ek_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* USB Host */
+	at91_add_device_usbh(&ek_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&ek_udc_data);
+	/* SPI */
+	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+	/* MMC */
+	at91_add_device_mmc(1, &ek_mmc_data);
+	/* NAND */
+	at91_add_device_nand(&ek_nand_data);
+}
+
+MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
+	/* Maintainer: Atmel */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= ek_map_io,
+	.init_irq	= ek_init_irq,
+	.init_machine	= ek_board_init,
+MACHINE_END
-- 
cgit v1.1


From c177a1e75a07237efe1f68fbf430892fdf2bb868 Mon Sep 17 00:00:00 2001
From: Andrew Victor <andrew@sanpeople.com>
Date: Thu, 8 Feb 2007 10:25:38 +0100
Subject: [ARM] 4147/1: AT91: Define Timer/Counter clocks.

Define the Timer/Counter Unit clocks on the AT91RM9200, AT91SAM9260 and
AT91SAM9261 processors.

Original patch from David Brownell.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/at91rm9200.c  | 37 ++++++++++++++++++++++++++++++++++++-
 arch/arm/mach-at91/at91sam9260.c | 38 ++++++++++++++++++++++++++++++++++++--
 arch/arm/mach-at91/at91sam9261.c | 19 ++++++++++++++++++-
 3 files changed, 90 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 870d4a4..2ddcdd6 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -117,6 +117,36 @@ static struct clk pioD_clk = {
 	.pmc_mask	= 1 << AT91RM9200_ID_PIOD,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+static struct clk tc0_clk = {
+	.name		= "tc0_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc1_clk = {
+	.name		= "tc1_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc2_clk = {
+	.name		= "tc2_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc3_clk = {
+	.name		= "tc3_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC3,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc4_clk = {
+	.name		= "tc4_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC4,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc5_clk = {
+	.name		= "tc5_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC5,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
 
 static struct clk *periph_clocks[] __initdata = {
 	&pioA_clk,
@@ -132,7 +162,12 @@ static struct clk *periph_clocks[] __initdata = {
 	&twi_clk,
 	&spi_clk,
 	// ssc 0 .. ssc2
-	// tc0 .. tc5
+	&tc0_clk,
+	&tc1_clk,
+	&tc2_clk,
+	&tc3_clk,
+	&tc4_clk,
+	&tc5_clk,
 	&ohci_clk,
 	&ether_clk,
 	// irq0 .. irq6
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index ffc4c09..e03ee62 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -107,6 +107,21 @@ static struct clk spi1_clk = {
 	.pmc_mask	= 1 << AT91SAM9260_ID_SPI1,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+static struct clk tc0_clk = {
+	.name		= "tc0_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc1_clk = {
+	.name		= "tc1_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc2_clk = {
+	.name		= "tc2_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
 static struct clk ohci_clk = {
 	.name		= "ohci_clk",
 	.pmc_mask	= 1 << AT91SAM9260_ID_UHP,
@@ -137,6 +152,21 @@ static struct clk usart5_clk = {
 	.pmc_mask	= 1 << AT91SAM9260_ID_US5,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+static struct clk tc3_clk = {
+	.name		= "tc3_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC3,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc4_clk = {
+	.name		= "tc4_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC4,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc5_clk = {
+	.name		= "tc5_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC5,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
 
 static struct clk *periph_clocks[] __initdata = {
 	&pioA_clk,
@@ -152,14 +182,18 @@ static struct clk *periph_clocks[] __initdata = {
 	&spi0_clk,
 	&spi1_clk,
 	// ssc
-	// tc0 .. tc2
+	&tc0_clk,
+	&tc1_clk,
+	&tc2_clk,
 	&ohci_clk,
 	&ether_clk,
 	&isi_clk,
 	&usart3_clk,
 	&usart4_clk,
 	&usart5_clk,
-	// tc3 .. tc5
+	&tc3_clk,
+	&tc4_clk,
+	&tc5_clk,
 	// irq0 .. irq2
 };
 
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 47e02ff..1a910236 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -97,6 +97,21 @@ static struct clk spi1_clk = {
 	.pmc_mask	= 1 << AT91SAM9261_ID_SPI1,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+static struct clk tc0_clk = {
+	.name		= "tc0_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_TC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc1_clk = {
+	.name		= "tc1_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_TC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc2_clk = {
+	.name		= "tc2_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_TC2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
 static struct clk ohci_clk = {
 	.name		= "ohci_clk",
 	.pmc_mask	= 1 << AT91SAM9261_ID_UHP,
@@ -121,7 +136,9 @@ static struct clk *periph_clocks[] __initdata = {
 	&spi0_clk,
 	&spi1_clk,
 	// ssc 0 .. ssc2
-	// tc0 .. tc2
+	&tc0_clk,
+	&tc1_clk,
+	&tc2_clk,
 	&ohci_clk,
 	&lcdc_clk,
 	// irq0 .. irq2
-- 
cgit v1.1


From 127a7ec69c9ce17a5add2e3c8c2f1a2733fb88d8 Mon Sep 17 00:00:00 2001
From: Andrew Victor <andrew@sanpeople.com>
Date: Thu, 8 Feb 2007 10:44:46 +0100
Subject: [ARM] 4148/1: AT91: Physically mapped flash on CSB337 and CSB637
 boards.

Define the physically mapped flash on the Cogent CSB337 and CSB637
boards.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/csb337_defconfig |  6 ++++--
 arch/arm/configs/csb637_defconfig |  6 ++++--
 arch/arm/mach-at91/board-csb337.c | 39 +++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/board-csb637.c | 39 +++++++++++++++++++++++++++++++++++++++
 4 files changed, 86 insertions(+), 4 deletions(-)

diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig
index 2cadd51..8e55f55 100644
--- a/arch/arm/configs/csb337_defconfig
+++ b/arch/arm/configs/csb337_defconfig
@@ -355,10 +355,12 @@ CONFIG_MTD_CFI_UTIL=y
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_PLATRAM is not set
-CONFIG_MTD_CSB337=y
 
 #
 # Self-contained MTD device drivers
diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig
index 94908c1..669f035 100644
--- a/arch/arm/configs/csb637_defconfig
+++ b/arch/arm/configs/csb637_defconfig
@@ -355,10 +355,12 @@ CONFIG_MTD_CFI_UTIL=y
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_PLATRAM is not set
-CONFIG_MTD_CSB637=y
 
 #
 # Self-contained MTD device drivers
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 871c660..e18a41e 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -24,6 +24,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
+#include <linux/mtd/physmap.h>
 
 #include <asm/hardware.h>
 #include <asm/setup.h>
@@ -112,6 +113,42 @@ static struct spi_board_info csb337_spi_devices[] = {
 	},
 };
 
+#define CSB_FLASH_BASE	AT91_CHIPSELECT_0
+#define CSB_FLASH_SIZE	0x800000
+
+static struct mtd_partition csb_flash_partitions[] = {
+	{
+		.name		= "uMON flash",
+		.offset		= 0,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= MTD_WRITEABLE,	/* read only */
+	}
+};
+
+static struct physmap_flash_data csb_flash_data = {
+	.width		= 2,
+	.parts		= csb_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(csb_flash_partitions),
+};
+
+static struct resource csb_flash_resources[] = {
+	{
+		.start	= CSB_FLASH_BASE,
+		.end	= CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device csb_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+				.platform_data = &csb_flash_data,
+			},
+	.resource	= csb_flash_resources,
+	.num_resources	= ARRAY_SIZE(csb_flash_resources),
+};
+
 static void __init csb337_board_init(void)
 {
 	/* Serial */
@@ -131,6 +168,8 @@ static void __init csb337_board_init(void)
 	at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
 	/* MMC */
 	at91_add_device_mmc(0, &csb337_mmc_data);
+	/* NOR flash */
+	platform_device_register(&csb_flash);
 }
 
 MACHINE_START(CSB337, "Cogent CSB337")
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index 7746094..77f04b9 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -23,6 +23,7 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
 
 #include <asm/hardware.h>
 #include <asm/setup.h>
@@ -81,6 +82,42 @@ static struct at91_udc_data __initdata csb637_udc_data = {
 	.pullup_pin   = AT91_PIN_PB1,
 };
 
+#define CSB_FLASH_BASE	AT91_CHIPSELECT_0
+#define CSB_FLASH_SIZE	0x1000000
+
+static struct mtd_partition csb_flash_partitions[] = {
+	{
+		.name		= "uMON flash",
+		.offset		= 0,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= MTD_WRITEABLE,	/* read only */
+	}
+};
+
+static struct physmap_flash_data csb_flash_data = {
+	.width		= 2,
+	.parts		= csb_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(csb_flash_partitions),
+};
+
+static struct resource csb_flash_resources[] = {
+	{
+		.start	= CSB_FLASH_BASE,
+		.end	= CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device csb_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+				.platform_data = &csb_flash_data,
+			},
+	.resource	= csb_flash_resources,
+	.num_resources	= ARRAY_SIZE(csb_flash_resources),
+};
+
 static void __init csb637_board_init(void)
 {
 	/* Serial */
@@ -95,6 +132,8 @@ static void __init csb637_board_init(void)
 	at91_add_device_i2c();
 	/* SPI */
 	at91_add_device_spi(NULL, 0);
+	/* NOR flash */
+	platform_device_register(&csb_flash);
 }
 
 MACHINE_START(CSB637, "Cogent CSB637")
-- 
cgit v1.1


From 3392b309dbd1f1f37454c412c2045448300cf374 Mon Sep 17 00:00:00 2001
From: Andrew Victor <andrew@sanpeople.com>
Date: Thu, 8 Feb 2007 11:04:19 +0100
Subject: [ARM] 4149/1: AT91: Overrun in SAM9 gettimeoffset().

Fix an overrun in the AT91SAM9 gettimeoffset() function.  This causes
the time value returned by gettimeofday() to jump "backwards".

Original patch from Michel Benoit.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/at91sam926x_time.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 59cbbe1..a4dded2 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -30,7 +30,6 @@
  * Returns number of microseconds since last timer interrupt.  Note that interrupts
  * will have been disabled by do_gettimeofday()
  *  'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
- *  'tick' is usecs per jiffy (linux/timex.h).
  */
 static unsigned long at91sam926x_gettimeoffset(void)
 {
@@ -39,7 +38,7 @@ static unsigned long at91sam926x_gettimeoffset(void)
 
 	elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t);		/* hardware clock cycles */
 
-	return (unsigned long)(elapsed * 1000000) / LATCH;
+	return (unsigned long)(elapsed * jiffies_to_usecs(1)) / LATCH;
 }
 
 /*
-- 
cgit v1.1


From da11d02c1da201840b94147d3366a32b41b151e1 Mon Sep 17 00:00:00 2001
From: Andrew Victor <andrew@sanpeople.com>
Date: Thu, 8 Feb 2007 11:18:14 +0100
Subject: [ARM] 4150/1: AT91: LED update

The GPIO pin setup should be handed by the platform-setup code, and not
directly by the driver.

Original patch from David Brownell.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/at91rm9200_devices.c  | 4 ++++
 arch/arm/mach-at91/at91sam9260_devices.c | 4 ++++
 arch/arm/mach-at91/at91sam9261_devices.c | 4 ++++
 arch/arm/mach-at91/leds.c                | 4 ----
 4 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 077c81f..2624a4f 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -594,6 +594,10 @@ u8 at91_leds_timer;
 
 void __init at91_init_leds(u8 cpu_led, u8 timer_led)
 {
+	/* Enable GPIO to access the LEDs */
+	at91_set_gpio_output(cpu_led, 1);
+	at91_set_gpio_output(timer_led, 1);
+
 	at91_leds_cpu	= cpu_led;
 	at91_leds_timer	= timer_led;
 }
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index b5d8968..f7d342c 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -515,6 +515,10 @@ u8 at91_leds_timer;
 
 void __init at91_init_leds(u8 cpu_led, u8 timer_led)
 {
+	/* Enable GPIO to access the LEDs */
+	at91_set_gpio_output(cpu_led, 1);
+	at91_set_gpio_output(timer_led, 1);
+
 	at91_leds_cpu	= cpu_led;
 	at91_leds_timer	= timer_led;
 }
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index b2f6d33..e150476 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -513,6 +513,10 @@ u8 at91_leds_timer;
 
 void __init at91_init_leds(u8 cpu_led, u8 timer_led)
 {
+	/* Enable GPIO to access the LEDs */
+	at91_set_gpio_output(cpu_led, 1);
+	at91_set_gpio_output(timer_led, 1);
+
 	at91_leds_cpu	= cpu_led;
 	at91_leds_timer	= timer_led;
 }
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
index 1a33373..0d51449 100644
--- a/arch/arm/mach-at91/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -86,10 +86,6 @@ static int __init leds_init(void)
 	if (!at91_leds_timer || !at91_leds_cpu)
 		return -ENODEV;
 
-	/* Enable PIO to access the LEDs */
-	at91_set_gpio_output(at91_leds_timer, 1);
-	at91_set_gpio_output(at91_leds_cpu, 1);
-
 	leds_event = at91_leds_event;
 
 	leds_event(led_start);
-- 
cgit v1.1


From 271f5ca638b322248c6bb0a797284886f39ccce6 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Thu, 8 Feb 2007 01:01:41 +0100
Subject: [ARM] 4142/1: ep93xx: handle IRQT_NOEDGE

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/core.c | 25 ++++++++++++++++---------
 1 file changed, 16 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 94bba0b..829aed6 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -152,7 +152,8 @@ struct sys_timer ep93xx_timer = {
 /*************************************************************************
  * GPIO handling for EP93xx
  *************************************************************************/
-static unsigned char gpio_int_enable[3];
+static unsigned char gpio_int_unmasked[3];
+static unsigned char gpio_int_enabled[3];
 static unsigned char gpio_int_type1[3];
 static unsigned char gpio_int_type2[3];
 
@@ -162,17 +163,17 @@ static void update_gpio_int_params(int abf)
 		__raw_writeb(0, EP93XX_GPIO_A_INT_ENABLE);
 		__raw_writeb(gpio_int_type2[0], EP93XX_GPIO_A_INT_TYPE2);
 		__raw_writeb(gpio_int_type1[0], EP93XX_GPIO_A_INT_TYPE1);
-		__raw_writeb(gpio_int_enable[0], EP93XX_GPIO_A_INT_ENABLE);
+		__raw_writeb(gpio_int_unmasked[0] & gpio_int_enabled[0], EP93XX_GPIO_A_INT_ENABLE);
 	} else if (abf == 1) {
 		__raw_writeb(0, EP93XX_GPIO_B_INT_ENABLE);
 		__raw_writeb(gpio_int_type2[1], EP93XX_GPIO_B_INT_TYPE2);
 		__raw_writeb(gpio_int_type1[1], EP93XX_GPIO_B_INT_TYPE1);
-		__raw_writeb(gpio_int_enable[1], EP93XX_GPIO_B_INT_ENABLE);
+		__raw_writeb(gpio_int_unmasked[1] & gpio_int_enabled[1], EP93XX_GPIO_B_INT_ENABLE);
 	} else if (abf == 2) {
 		__raw_writeb(0, EP93XX_GPIO_F_INT_ENABLE);
 		__raw_writeb(gpio_int_type2[2], EP93XX_GPIO_F_INT_TYPE2);
 		__raw_writeb(gpio_int_type1[2], EP93XX_GPIO_F_INT_TYPE1);
-		__raw_writeb(gpio_int_enable[2], EP93XX_GPIO_F_INT_ENABLE);
+		__raw_writeb(gpio_int_unmasked[2] & gpio_int_enabled[2], EP93XX_GPIO_F_INT_ENABLE);
 	} else {
 		BUG();
 	}
@@ -200,11 +201,11 @@ void gpio_line_config(int line, int direction)
 	if (direction == GPIO_OUT) {
 		if (line >= 0 && line < 16) {
 			/* Port A/B.  */
-			gpio_int_enable[line >> 3] &= ~(1 << (line & 7));
+			gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
 			update_gpio_int_params(line >> 3);
 		} else if (line >= 40 && line < 48) {
 			/* Port F.  */
-			gpio_int_enable[2] &= ~(1 << (line & 7));
+			gpio_int_unmasked[2] &= ~(1 << (line & 7));
 			update_gpio_int_params(2);
 		}
 
@@ -290,7 +291,7 @@ static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
 	int line = irq - IRQ_EP93XX_GPIO(0);
 	int port = line >> 3;
 
-	gpio_int_enable[port] &= ~(1 << (line & 7));
+	gpio_int_unmasked[port] &= ~(1 << (line & 7));
 	update_gpio_int_params(port);
 
 	if (port == 0) {
@@ -307,7 +308,7 @@ static void ep93xx_gpio_irq_mask(unsigned int irq)
 	int line = irq - IRQ_EP93XX_GPIO(0);
 	int port = line >> 3;
 
-	gpio_int_enable[port] &= ~(1 << (line & 7));
+	gpio_int_unmasked[port] &= ~(1 << (line & 7));
 	update_gpio_int_params(port);
 }
 
@@ -316,7 +317,7 @@ static void ep93xx_gpio_irq_unmask(unsigned int irq)
 	int line = irq - IRQ_EP93XX_GPIO(0);
 	int port = line >> 3;
 
-	gpio_int_enable[port] |= 1 << (line & 7);
+	gpio_int_unmasked[port] |= 1 << (line & 7);
 	update_gpio_int_params(port);
 }
 
@@ -342,17 +343,23 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
 	line &= 7;
 
 	if (type & IRQT_RISING) {
+		gpio_int_enabled[port] |= 1 << line;
 		gpio_int_type1[port] |= 1 << line;
 		gpio_int_type2[port] |= 1 << line;
 	} else if (type & IRQT_FALLING) {
+		gpio_int_enabled[port] |= 1 << line;
 		gpio_int_type1[port] |= 1 << line;
 		gpio_int_type2[port] &= ~(1 << line);
 	} else if (type & IRQT_HIGH) {
+		gpio_int_enabled[port] |= 1 << line;
 		gpio_int_type1[port] &= ~(1 << line);
 		gpio_int_type2[port] |= 1 << line;
 	} else if (type & IRQT_LOW) {
+		gpio_int_enabled[port] |= 1 << line;
 		gpio_int_type1[port] &= ~(1 << line);
 		gpio_int_type2[port] &= ~(1 << line);
+	} else {
+		gpio_int_enabled[port] &= ~(1 << line);
 	}
 	update_gpio_int_params(port);
 
-- 
cgit v1.1


From 32f3f49910c7e228839c1cd144dbed8da342703b Mon Sep 17 00:00:00 2001
From: Milan Svoboda <msvoboda@ra.rockwell.com>
Date: Wed, 7 Feb 2007 08:43:35 +0100
Subject: [ARM] 4141/1: consolidate functions that handles gpio in pxa2xx_udc

This patch renames pxa_gpio_set/get functions defined in drivers/usb/gadget/pxa2xx_udc.h to udc_gpio_set/get.

These functions are moved from drivers/usb/gadget/pxa2xx_udc.h to include/asm-arm/arch-pxa2xx/udc.h

Creates new functions: udc_gpio_to_irq, udc_gpio_init_vbus, udc_gpio_init_pullup in include/asm-arm/arch-pxa2xx/udc.h. These functions are used in drivers/usb/gadget/pxa2xx_udc.c instead of direct low-level (pxa2xx only) functions.

Creates all these udc_gpio_* functions in include/asm-arm/arch-ixp4xx/udc.h. This implementation has no real code because ixp4xx doesn't use vbus - only vbus uses all these gpio functions (and because ixp4xx misses any function which converts number of gpio pin into it's irq).

This is next step to make pxa2xx_udc fully work on ixp4xx platform.

Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/usb/gadget/pxa2xx_udc.c   | 16 +++++++---------
 drivers/usb/gadget/pxa2xx_udc.h   | 15 ---------------
 include/asm-arm/arch-ixp4xx/udc.h | 22 ++++++++++++++++++++++
 include/asm-arm/arch-pxa/udc.h    | 30 ++++++++++++++++++++++++++++++
 4 files changed, 59 insertions(+), 24 deletions(-)

diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index b78de96..3547f04 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -156,7 +156,7 @@ static int is_vbus_present(void)
 	struct pxa2xx_udc_mach_info		*mach = the_controller->mach;
 
 	if (mach->gpio_vbus)
-		return pxa_gpio_get(mach->gpio_vbus);
+		return udc_gpio_get(mach->gpio_vbus);
 	if (mach->udc_is_connected)
 		return mach->udc_is_connected();
 	return 1;
@@ -168,7 +168,7 @@ static void pullup_off(void)
 	struct pxa2xx_udc_mach_info		*mach = the_controller->mach;
 
 	if (mach->gpio_pullup)
-		pxa_gpio_set(mach->gpio_pullup, 0);
+		udc_gpio_set(mach->gpio_pullup, 0);
 	else if (mach->udc_command)
 		mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
 }
@@ -178,7 +178,7 @@ static void pullup_on(void)
 	struct pxa2xx_udc_mach_info		*mach = the_controller->mach;
 
 	if (mach->gpio_pullup)
-		pxa_gpio_set(mach->gpio_pullup, 1);
+		udc_gpio_set(mach->gpio_pullup, 1);
 	else if (mach->udc_command)
 		mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
 }
@@ -1756,7 +1756,7 @@ lubbock_vbus_irq(int irq, void *_dev)
 static irqreturn_t udc_vbus_irq(int irq, void *_dev)
 {
 	struct pxa2xx_udc	*dev = _dev;
-	int			vbus = pxa_gpio_get(dev->mach->gpio_vbus);
+	int			vbus = udc_gpio_get(dev->mach->gpio_vbus);
 
 	pxa2xx_udc_vbus_session(&dev->gadget, vbus);
 	return IRQ_HANDLED;
@@ -2546,15 +2546,13 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev)
 	dev->dev = &pdev->dev;
 	dev->mach = pdev->dev.platform_data;
 	if (dev->mach->gpio_vbus) {
-		vbus_irq = IRQ_GPIO(dev->mach->gpio_vbus & GPIO_MD_MASK_NR);
-		pxa_gpio_mode((dev->mach->gpio_vbus & GPIO_MD_MASK_NR)
-				| GPIO_IN);
+		udc_gpio_init_vbus(dev->mach->gpio_vbus);
+		vbus_irq = udc_gpio_to_irq(dev->mach->gpio_vbus);
 		set_irq_type(vbus_irq, IRQT_BOTHEDGE);
 	} else
 		vbus_irq = 0;
 	if (dev->mach->gpio_pullup)
-		pxa_gpio_mode((dev->mach->gpio_pullup & GPIO_MD_MASK_NR)
-				| GPIO_OUT | GPIO_DFLT_LOW);
+		udc_gpio_init_pullup(dev->mach->gpio_pullup);
 
 	init_timer(&dev->timer);
 	dev->timer.function = udc_watchdog;
diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h
index 8e598c8..773e549 100644
--- a/drivers/usb/gadget/pxa2xx_udc.h
+++ b/drivers/usb/gadget/pxa2xx_udc.h
@@ -177,21 +177,6 @@ struct pxa2xx_udc {
 
 static struct pxa2xx_udc *the_controller;
 
-static inline int pxa_gpio_get(unsigned gpio)
-{
-	return (GPLR(gpio) & GPIO_bit(gpio)) != 0;
-}
-
-static inline void pxa_gpio_set(unsigned gpio, int is_on)
-{
-	int mask = GPIO_bit(gpio);
-
-	if (is_on)
-		GPSR(gpio) = mask;
-	else
-		GPCR(gpio) = mask;
-}
-
 /*-------------------------------------------------------------------------*/
 
 /*
diff --git a/include/asm-arm/arch-ixp4xx/udc.h b/include/asm-arm/arch-ixp4xx/udc.h
index dbdec36f..79b850a 100644
--- a/include/asm-arm/arch-ixp4xx/udc.h
+++ b/include/asm-arm/arch-ixp4xx/udc.h
@@ -6,3 +6,25 @@
 
 extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info);
 
+static inline int udc_gpio_to_irq(unsigned gpio)
+{
+	return 0;
+}
+
+static inline void udc_gpio_init_vbus(unsigned gpio)
+{
+}
+
+static inline void udc_gpio_init_pullup(unsigned gpio)
+{
+}
+
+static inline int udc_gpio_get(unsigned gpio)
+{
+	return 0;
+}
+
+static inline void udc_gpio_set(unsigned gpio, int is_on)
+{
+}
+
diff --git a/include/asm-arm/arch-pxa/udc.h b/include/asm-arm/arch-pxa/udc.h
index 646480d..8bc6f9c 100644
--- a/include/asm-arm/arch-pxa/udc.h
+++ b/include/asm-arm/arch-pxa/udc.h
@@ -9,3 +9,33 @@
 
 extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info);
 
+static inline int udc_gpio_to_irq(unsigned gpio)
+{
+	return IRQ_GPIO(gpio & GPIO_MD_MASK_NR);
+}
+
+static inline void udc_gpio_init_vbus(unsigned gpio)
+{
+	pxa_gpio_mode((gpio & GPIO_MD_MASK_NR) | GPIO_IN);
+}
+
+static inline void udc_gpio_init_pullup(unsigned gpio)
+{
+	pxa_gpio_mode((gpio & GPIO_MD_MASK_NR) | GPIO_OUT | GPIO_DFLT_LOW);
+}
+
+static inline int udc_gpio_get(unsigned gpio)
+{
+	return (GPLR(gpio) & GPIO_bit(gpio)) != 0;
+}
+
+static inline void udc_gpio_set(unsigned gpio, int is_on)
+{
+	int mask = GPIO_bit(gpio);
+
+	if (is_on)
+		GPSR(gpio) = mask;
+	else
+		GPCR(gpio) = mask;
+}
+
-- 
cgit v1.1


From 93a3ddc201c501146c896d598deb61f3abbe4ab0 Mon Sep 17 00:00:00 2001
From: Andrew Victor <andrew@sanpeople.com>
Date: Thu, 8 Feb 2007 11:31:22 +0100
Subject: [ARM] 4151/1: AT91 / AVR32: Move at91_pdc.h to linux/atmel_pdc.h

The Atmel AT91 and AVR32 processor architectures share many of the same
peripherals.  The PDC (Peripheral Data Controller) registers are also
implemented within in a number of the on-chip peripherals (eg, USART,
MMC, SPI, SSC, etc).

In a attempt not to duplicate the register definitions in each
peripheral, or in each architecture, the at91_pdc.h header in
asm-arm/arch-at91 and asm-avr32/arch-at32ap has been replaced with
linux/atmel_pdc.h.

The definitions have also been renamed from AT91_PDC_* to ATMEL_PDC_*,
and the drivers updated accordingly.

Original patch from Nicolas Ferre.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/mmc/at91_mci.c                   | 46 ++++++++++++++++----------------
 drivers/serial/atmel_serial.c            |  3 ++-
 include/asm-arm/arch-at91/at91_pdc.h     | 36 -------------------------
 include/asm-avr32/arch-at32ap/at91_pdc.h | 36 -------------------------
 include/linux/atmel_pdc.h                | 36 +++++++++++++++++++++++++
 5 files changed, 61 insertions(+), 96 deletions(-)
 delete mode 100644 include/asm-arm/arch-at91/at91_pdc.h
 delete mode 100644 include/asm-avr32/arch-at32ap/at91_pdc.h
 create mode 100644 include/linux/atmel_pdc.h

diff --git a/drivers/mmc/at91_mci.c b/drivers/mmc/at91_mci.c
index aa152f3..521ace9 100644
--- a/drivers/mmc/at91_mci.c
+++ b/drivers/mmc/at91_mci.c
@@ -64,6 +64,7 @@
 #include <linux/err.h>
 #include <linux/dma-mapping.h>
 #include <linux/clk.h>
+#include <linux/atmel_pdc.h>
 
 #include <linux/mmc/host.h>
 #include <linux/mmc/protocol.h>
@@ -75,7 +76,6 @@
 #include <asm/arch/cpu.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/at91_mci.h>
-#include <asm/arch/at91_pdc.h>
 
 #define DRIVER_NAME "at91_mci"
 
@@ -211,13 +211,13 @@ static void at91mci_pre_dma_read(struct at91mci_host *host)
 
 		/* Check to see if this needs filling */
 		if (i == 0) {
-			if (at91_mci_read(host, AT91_PDC_RCR) != 0) {
+			if (at91_mci_read(host, ATMEL_PDC_RCR) != 0) {
 				pr_debug("Transfer active in current\n");
 				continue;
 			}
 		}
 		else {
-			if (at91_mci_read(host, AT91_PDC_RNCR) != 0) {
+			if (at91_mci_read(host, ATMEL_PDC_RNCR) != 0) {
 				pr_debug("Transfer active in next\n");
 				continue;
 			}
@@ -234,12 +234,12 @@ static void at91mci_pre_dma_read(struct at91mci_host *host)
 		pr_debug("dma address = %08X, length = %d\n", sg->dma_address, sg->length);
 
 		if (i == 0) {
-			at91_mci_write(host, AT91_PDC_RPR, sg->dma_address);
-			at91_mci_write(host, AT91_PDC_RCR, sg->length / 4);
+			at91_mci_write(host, ATMEL_PDC_RPR, sg->dma_address);
+			at91_mci_write(host, ATMEL_PDC_RCR, sg->length / 4);
 		}
 		else {
-			at91_mci_write(host, AT91_PDC_RNPR, sg->dma_address);
-			at91_mci_write(host, AT91_PDC_RNCR, sg->length / 4);
+			at91_mci_write(host, ATMEL_PDC_RNPR, sg->dma_address);
+			at91_mci_write(host, ATMEL_PDC_RNCR, sg->length / 4);
 		}
 	}
 
@@ -303,7 +303,7 @@ static void at91mci_post_dma_read(struct at91mci_host *host)
 		at91mci_pre_dma_read(host);
 	else {
 		at91_mci_write(host, AT91_MCI_IER, AT91_MCI_RXBUFF);
-		at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
+		at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
 	}
 
 	pr_debug("post dma read done\n");
@@ -320,7 +320,7 @@ static void at91_mci_handle_transmitted(struct at91mci_host *host)
 	pr_debug("Handling the transmit\n");
 
 	/* Disable the transfer */
-	at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
+	at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
 
 	/* Now wait for cmd ready */
 	at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_TXBUFE);
@@ -431,15 +431,15 @@ static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_
 		cmd->opcode, cmdr, cmd->arg, blocks, block_length, at91_mci_read(host, AT91_MCI_MR));
 
 	if (!data) {
-		at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_TXTDIS | AT91_PDC_RXTDIS);
-		at91_mci_write(host, AT91_PDC_RPR, 0);
-		at91_mci_write(host, AT91_PDC_RCR, 0);
-		at91_mci_write(host, AT91_PDC_RNPR, 0);
-		at91_mci_write(host, AT91_PDC_RNCR, 0);
-		at91_mci_write(host, AT91_PDC_TPR, 0);
-		at91_mci_write(host, AT91_PDC_TCR, 0);
-		at91_mci_write(host, AT91_PDC_TNPR, 0);
-		at91_mci_write(host, AT91_PDC_TNCR, 0);
+		at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTDIS | ATMEL_PDC_RXTDIS);
+		at91_mci_write(host, ATMEL_PDC_RPR, 0);
+		at91_mci_write(host, ATMEL_PDC_RCR, 0);
+		at91_mci_write(host, ATMEL_PDC_RNPR, 0);
+		at91_mci_write(host, ATMEL_PDC_RNCR, 0);
+		at91_mci_write(host, ATMEL_PDC_TPR, 0);
+		at91_mci_write(host, ATMEL_PDC_TCR, 0);
+		at91_mci_write(host, ATMEL_PDC_TNPR, 0);
+		at91_mci_write(host, ATMEL_PDC_TNCR, 0);
 
 		at91_mci_write(host, AT91_MCI_ARGR, cmd->arg);
 		at91_mci_write(host, AT91_MCI_CMDR, cmdr);
@@ -452,7 +452,7 @@ static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_
 	/*
 	 * Disable the PDC controller
 	 */
-	at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
+	at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
 
 	if (cmdr & AT91_MCI_TRCMD_START) {
 		data->bytes_xfered = 0;
@@ -481,8 +481,8 @@ static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_
 
 			pr_debug("Transmitting %d bytes\n", host->total_length);
 
-			at91_mci_write(host, AT91_PDC_TPR, host->physical_address);
-			at91_mci_write(host, AT91_PDC_TCR, host->total_length / 4);
+			at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address);
+			at91_mci_write(host, ATMEL_PDC_TCR, host->total_length / 4);
 			ier = AT91_MCI_TXBUFE;
 		}
 	}
@@ -497,9 +497,9 @@ static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_
 
 	if (cmdr & AT91_MCI_TRCMD_START) {
 		if (cmdr & AT91_MCI_TRDIR)
-			at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTEN);
+			at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN);
 		else
-			at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_TXTEN);
+			at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN);
 	}
 	return ier;
 }
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 881f886..0715647 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -33,12 +33,13 @@
 #include <linux/sysrq.h>
 #include <linux/tty_flip.h>
 #include <linux/platform_device.h>
+#include <linux/atmel_pdc.h>
 
 #include <asm/io.h>
 
 #include <asm/mach/serial_at91.h>
 #include <asm/arch/board.h>
-#include <asm/arch/at91_pdc.h>
+
 #ifdef CONFIG_ARM
 #include <asm/arch/cpu.h>
 #include <asm/arch/gpio.h>
diff --git a/include/asm-arm/arch-at91/at91_pdc.h b/include/asm-arm/arch-at91/at91_pdc.h
deleted file mode 100644
index a54adf5..0000000
--- a/include/asm-arm/arch-at91/at91_pdc.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_pdc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Peripheral Data Controller (PDC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PDC_H
-#define AT91_PDC_H
-
-#define AT91_PDC_RPR		0x100	/* Receive Pointer Register */
-#define AT91_PDC_RCR		0x104	/* Receive Counter Register */
-#define AT91_PDC_TPR		0x108	/* Transmit Pointer Register */
-#define AT91_PDC_TCR		0x10c	/* Transmit Counter Register */
-#define AT91_PDC_RNPR		0x110	/* Receive Next Pointer Register */
-#define AT91_PDC_RNCR		0x114	/* Receive Next Counter Register */
-#define AT91_PDC_TNPR		0x118	/* Transmit Next Pointer Register */
-#define AT91_PDC_TNCR		0x11c	/* Transmit Next Counter Register */
-
-#define AT91_PDC_PTCR		0x120	/* Transfer Control Register */
-#define		AT91_PDC_RXTEN		(1 << 0)	/* Receiver Transfer Enable */
-#define		AT91_PDC_RXTDIS		(1 << 1)	/* Receiver Transfer Disable */
-#define		AT91_PDC_TXTEN		(1 << 8)	/* Transmitter Transfer Enable */
-#define		AT91_PDC_TXTDIS		(1 << 9)	/* Transmitter Transfer Disable */
-
-#define AT91_PDC_PTSR		0x124	/* Transfer Status Register */
-
-#endif
diff --git a/include/asm-avr32/arch-at32ap/at91_pdc.h b/include/asm-avr32/arch-at32ap/at91_pdc.h
deleted file mode 100644
index a54adf5..0000000
--- a/include/asm-avr32/arch-at32ap/at91_pdc.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_pdc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Peripheral Data Controller (PDC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PDC_H
-#define AT91_PDC_H
-
-#define AT91_PDC_RPR		0x100	/* Receive Pointer Register */
-#define AT91_PDC_RCR		0x104	/* Receive Counter Register */
-#define AT91_PDC_TPR		0x108	/* Transmit Pointer Register */
-#define AT91_PDC_TCR		0x10c	/* Transmit Counter Register */
-#define AT91_PDC_RNPR		0x110	/* Receive Next Pointer Register */
-#define AT91_PDC_RNCR		0x114	/* Receive Next Counter Register */
-#define AT91_PDC_TNPR		0x118	/* Transmit Next Pointer Register */
-#define AT91_PDC_TNCR		0x11c	/* Transmit Next Counter Register */
-
-#define AT91_PDC_PTCR		0x120	/* Transfer Control Register */
-#define		AT91_PDC_RXTEN		(1 << 0)	/* Receiver Transfer Enable */
-#define		AT91_PDC_RXTDIS		(1 << 1)	/* Receiver Transfer Disable */
-#define		AT91_PDC_TXTEN		(1 << 8)	/* Transmitter Transfer Enable */
-#define		AT91_PDC_TXTDIS		(1 << 9)	/* Transmitter Transfer Disable */
-
-#define AT91_PDC_PTSR		0x124	/* Transfer Status Register */
-
-#endif
diff --git a/include/linux/atmel_pdc.h b/include/linux/atmel_pdc.h
new file mode 100644
index 0000000..5058a31
--- /dev/null
+++ b/include/linux/atmel_pdc.h
@@ -0,0 +1,36 @@
+/*
+ * include/linux/atmel_pdc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Peripheral Data Controller (PDC) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef ATMEL_PDC_H
+#define ATMEL_PDC_H
+
+#define ATMEL_PDC_RPR		0x100	/* Receive Pointer Register */
+#define ATMEL_PDC_RCR		0x104	/* Receive Counter Register */
+#define ATMEL_PDC_TPR		0x108	/* Transmit Pointer Register */
+#define ATMEL_PDC_TCR		0x10c	/* Transmit Counter Register */
+#define ATMEL_PDC_RNPR		0x110	/* Receive Next Pointer Register */
+#define ATMEL_PDC_RNCR		0x114	/* Receive Next Counter Register */
+#define ATMEL_PDC_TNPR		0x118	/* Transmit Next Pointer Register */
+#define ATMEL_PDC_TNCR		0x11c	/* Transmit Next Counter Register */
+
+#define ATMEL_PDC_PTCR		0x120	/* Transfer Control Register */
+#define		ATMEL_PDC_RXTEN		(1 << 0)	/* Receiver Transfer Enable */
+#define		ATMEL_PDC_RXTDIS	(1 << 1)	/* Receiver Transfer Disable */
+#define		ATMEL_PDC_TXTEN		(1 << 8)	/* Transmitter Transfer Enable */
+#define		ATMEL_PDC_TXTDIS	(1 << 9)	/* Transmitter Transfer Disable */
+
+#define ATMEL_PDC_PTSR		0x124	/* Transfer Status Register */
+
+#endif
-- 
cgit v1.1


From 108d093fdd75643dfc8c327f38125f4da76771e7 Mon Sep 17 00:00:00 2001
From: Liam Girdwood <Liam.Girdwood@wolfsonmicro.com>
Date: Thu, 8 Feb 2007 16:23:29 +0100
Subject: [ARM] 4152/1: Add PXA SSP audio register defs and fixups

This patchs adds some missing register bit defs for the PXA SSP ports audio registers and fixes up some other broken bit definitions as noticed by Russell.

Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-pxa/pxa-regs.h | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index e24f6b6..20576d10 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -474,8 +474,8 @@
 #define SADIV		__REG(0x40400060)  /* Audio Clock Divider Register. */
 #define SADR		__REG(0x40400080)  /* Serial Audio Data Register (TX and RX FIFO access Register). */
 
-#define SACR0_RFTH(x)	(x << 12)	/* Rx FIFO Interrupt or DMA Trigger Threshold */
-#define SACR0_TFTH(x)	(x << 8)	/* Tx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_RFTH(x)	((x) << 12)	/* Rx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_TFTH(x)	((x) << 8)	/* Tx FIFO Interrupt or DMA Trigger Threshold */
 #define SACR0_STRF	(1 << 5)	/* FIFO Select for EFWR Special Function */
 #define SACR0_EFWR	(1 << 4)	/* Enable EFWR Function  */
 #define SACR0_RST	(1 << 3)	/* FIFO, i2s Register Reset */
@@ -1682,15 +1682,18 @@
 #define SSSR_PINT		(1 << 18)	/* Peripheral Trailing Byte Interrupt */
 
 #define SSPSP_FSRT		(1 << 25)	/* Frame Sync Relative Timing */
-#define SSPSP_DMYSTOP(x)	(x << 23)	/* Dummy Stop */
-#define SSPSP_SFRMWDTH(x)	(x << 16)	/* Serial Frame Width */
-#define SSPSP_SFRMDLY(x)	(x << 9)	/* Serial Frame Delay */
-#define SSPSP_DMYSTRT(x)	(x << 7)	/* Dummy Start */
-#define SSPSP_STRTDLY(x)	(x << 4)	/* Start Delay */
+#define SSPSP_DMYSTOP(x)	((x) << 23)	/* Dummy Stop */
+#define SSPSP_SFRMWDTH(x)	((x) << 16)	/* Serial Frame Width */
+#define SSPSP_SFRMDLY(x)	((x) << 9)	/* Serial Frame Delay */
+#define SSPSP_DMYSTRT(x)	((x) << 7)	/* Dummy Start */
+#define SSPSP_STRTDLY(x)	((x) << 4)	/* Start Delay */
 #define SSPSP_ETDS			(1 << 3)	/* End of Transfer data State */
 #define SSPSP_SFRMP			(1 << 2)	/* Serial Frame Polarity */
-#define SSPSP_SCMODE(x)		(x << 0)	/* Serial Bit Rate Clock Mode */
+#define SSPSP_SCMODE(x)		((x) << 0)	/* Serial Bit Rate Clock Mode */
 
+#define SSACD_SCDB		(1 << 3)	/* SSPSYSCLK Divider Bypass */
+#define SSACD_ACPS(x)		((x) << 4)	/* Audio clock PLL select */
+#define SSACD_ACDS(x)		((x) << 0)	/* Audio clock divider select */
 
 #define SSCR0_P1	__REG(0x41000000)  /* SSP Port 1 Control Register 0 */
 #define SSCR1_P1	__REG(0x41000004)  /* SSP Port 1 Control Register 1 */
-- 
cgit v1.1


From 3e1a80f11f89f318e892694b501735abb51ef626 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Thu, 8 Feb 2007 16:26:23 +0100
Subject: [ARM] 4153/1: fix consistent_sync() off-by-one BUG check

In consistent_sync(), start + size can end up pointing one byte
beyond the end of the direct RAM mapping.  We shouldn't BUG() when
this happens.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/consistent.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c
index 166aee1..1f9f94f 100644
--- a/arch/arm/mm/consistent.c
+++ b/arch/arm/mm/consistent.c
@@ -485,7 +485,7 @@ void consistent_sync(const void *start, size_t size, int direction)
 {
 	const void *end = start + size;
 
-	BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(end));
+	BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(end - 1));
 
 	switch (direction) {
 	case DMA_FROM_DEVICE:		/* invalidate only */
-- 
cgit v1.1


From f2131d348f0bd252801f641018a90d59c987ce48 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 8 Feb 2007 20:46:20 +0000
Subject: [ARM] Always mark ARMv6 PTWs outer cacheable

Other platforms other than SMP may have an outer cache.  For these, we
also need to mark the page table walks outer cacheable.  Since marking
the walks always outer cacheable apparantly has no side effects, we
might as well always mark them so.

However, we continue to only mark PTWs shared if we have SMP enabled.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/proc-v6.S | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 7b1843b..d78c0ae 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -30,6 +30,12 @@
 #define TTB_RGN_WT	(2 << 3)
 #define TTB_RGN_WB	(3 << 3)
 
+#ifndef CONFIG_SMP
+#define TTB_FLAGS	TTB_RGN_WBWA
+#else
+#define TTB_FLAGS	TTB_RGN_WBWA|TTB_S
+#endif
+
 ENTRY(cpu_v6_proc_init)
 	mov	pc, lr
 
@@ -92,9 +98,7 @@ ENTRY(cpu_v6_switch_mm)
 #ifdef CONFIG_MMU
 	mov	r2, #0
 	ldr	r1, [r1, #MM_CONTEXT_ID]	@ get mm->context.id
-#ifdef CONFIG_SMP
-	orr	r0, r0, #TTB_RGN_WBWA|TTB_S	@ mark PTWs shared, outer cacheable
-#endif
+	orr	r0, r0, #TTB_FLAGS
 	mcr	p15, 0, r2, c7, c5, 6		@ flush BTAC/BTB
 	mcr	p15, 0, r2, c7, c10, 4		@ drain write buffer
 	mcr	p15, 0, r0, c2, c0, 0		@ set TTB 0
@@ -204,9 +208,7 @@ __v6_setup:
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r0, c8, c7, 0		@ invalidate I + D TLBs
 	mcr	p15, 0, r0, c2, c0, 2		@ TTB control register
-#ifdef CONFIG_SMP
-	orr	r4, r4, #TTB_RGN_WBWA|TTB_S	@ mark PTWs shared, outer cacheable
-#endif
+	orr	r4, r4, #TTB_FLAGS
 	mcr	p15, 0, r4, c2, c0, 1		@ load TTB1
 #endif /* CONFIG_MMU */
 	adr	r5, v6_crval
-- 
cgit v1.1


From c9b75d132261096ac1170354b9e27837af76a512 Mon Sep 17 00:00:00 2001
From: Andrew Victor <andrew@sanpeople.com>
Date: Thu, 8 Feb 2007 17:36:34 +0100
Subject: [ARM] 4154/1: AT91: Clock update

Unconditionally disabling the PCKs (Programmable Clocks) is not a good
idea as it breaks boards that depend on those clocks being enabled by
bootloaders.
Therefore only disable unused clocks late in the init process, giving
the board init code the chance to claim the clock.

Patch from Steven Scholz.

Since the HCK clocks on SAM9261 are already being registered as a
independent clocks, we don't need the special case for HCK0 on the
SAM9261.  Platform-init code and drivers should use the clock API to
enable/disable the clock.

Patch from Nicolas Ferre.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/clock.c | 62 ++++++++++++++++++++++------------------------
 1 file changed, 29 insertions(+), 33 deletions(-)

diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 27e7279b..f6cb748 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -525,27 +525,6 @@ fail:
 	return 0;
 }
 
-/*
- * Several unused clocks may be active.  Turn them off.
- */
-static void __init at91_periphclk_reset(void)
-{
-	unsigned long reg;
-	struct clk *clk;
-
-	reg = at91_sys_read(AT91_PMC_PCSR);
-
-	list_for_each_entry(clk, &clocks, node) {
-		if (clk->mode != pmc_periph_mode)
-			continue;
-
-		if (clk->users > 0)
-			reg &= ~clk->pmc_mask;
-	}
-
-	at91_sys_write(AT91_PMC_PCDR, reg);
-}
-
 static struct clk *const standard_pmc_clocks[] __initdata = {
 	/* four primary clocks */
 	&clk32k,
@@ -586,7 +565,7 @@ int __init at91_clock_init(unsigned long main_clock)
 		pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
 
 	/*
-	 * USB clock init:  choose 48 MHz PLLB value, turn all clocks off,
+	 * USB clock init:  choose 48 MHz PLLB value,
 	 * disable 48MHz clock during usb peripheral suspend.
 	 *
 	 * REVISIT:  assumes MCK doesn't derive from PLLB!
@@ -596,16 +575,10 @@ int __init at91_clock_init(unsigned long main_clock)
 	if (cpu_is_at91rm9200()) {
 		uhpck.pmc_mask = AT91RM9200_PMC_UHP;
 		udpck.pmc_mask = AT91RM9200_PMC_UDP;
-		at91_sys_write(AT91_PMC_SCDR, AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP);
 		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
-	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) {
+	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) {
 		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
 		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
-		at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP);
-	} else if (cpu_is_at91sam9261()) {
-		uhpck.pmc_mask = (AT91SAM926x_PMC_UHP | AT91_PMC_HCK0);
-		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
-		at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91_PMC_HCK0 | AT91SAM926x_PMC_UDP);
 	}
 	at91_sys_write(AT91_CKGR_PLLBR, 0);
 
@@ -634,11 +607,34 @@ int __init at91_clock_init(unsigned long main_clock)
 		(unsigned) main_clock / 1000000,
 		((unsigned) main_clock % 1000000) / 1000);
 
-	/* disable all programmable clocks */
-	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK0 | AT91_PMC_PCK1 | AT91_PMC_PCK2 | AT91_PMC_PCK3);
+	return 0;
+}
+
+/*
+ * Several unused clocks may be active.  Turn them off.
+ */
+static int __init at91_clock_reset(void)
+{
+	unsigned long pcdr = 0;
+	unsigned long scdr = 0;
+	struct clk *clk;
+
+	list_for_each_entry(clk, &clocks, node) {
+		if (clk->users > 0)
+			continue;
+
+		if (clk->mode == pmc_periph_mode)
+			pcdr |= clk->pmc_mask;
+
+		if (clk->mode == pmc_sys_mode)
+			scdr |= clk->pmc_mask;
+
+		pr_debug("Clocks: disable unused %s\n", clk->name);
+	}
 
-	/* disable all other unused peripheral clocks */
-	at91_periphclk_reset();
+	at91_sys_write(AT91_PMC_PCDR, pcdr);
+	at91_sys_write(AT91_PMC_SCDR, scdr);
 
 	return 0;
 }
+late_initcall(at91_clock_reset);
-- 
cgit v1.1


From 382266ad5ad4119ec12df889afa5062a0a0cd6ae Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Mon, 5 Feb 2007 14:48:19 +0100
Subject: [ARM] 4135/1: Add support for the L210/L220 cache controllers

This patch adds the support for the L210/L220 (outer) cache
controller. The cache range operations are done by index/way since L2
cache controller only accepts physical addresses.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/Kconfig                   |   4 ++
 arch/arm/mm/Makefile                  |   2 +
 arch/arm/mm/cache-l2x0.c              | 104 ++++++++++++++++++++++++++++++++++
 include/asm-arm/hardware/cache-l2x0.h |  56 ++++++++++++++++++
 4 files changed, 166 insertions(+)
 create mode 100644 arch/arm/mm/cache-l2x0.c
 create mode 100644 include/asm-arm/hardware/cache-l2x0.h

diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index a84eed9..af3fa9d 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -612,3 +612,7 @@ config NEEDS_SYSCALL_FOR_CMPXCHG
 config OUTER_CACHE
 	bool
 	default n
+
+config CACHE_L2X0
+	bool
+	select OUTER_CACHE
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index d2f5672..2f8b959 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -66,3 +66,5 @@ obj-$(CONFIG_CPU_SA1100)	+= proc-sa1100.o
 obj-$(CONFIG_CPU_XSCALE)	+= proc-xscale.o
 obj-$(CONFIG_CPU_XSC3)		+= proc-xsc3.o
 obj-$(CONFIG_CPU_V6)		+= proc-v6.o
+
+obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
new file mode 100644
index 0000000..08a36f1
--- /dev/null
+++ b/arch/arm/mm/cache-l2x0.c
@@ -0,0 +1,104 @@
+/*
+ * arch/arm/mm/cache-l2x0.c - L210/L220 cache controller support
+ *
+ * Copyright (C) 2007 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/init.h>
+
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#define CACHE_LINE_SIZE		32
+
+static void __iomem *l2x0_base;
+
+static inline void sync_writel(unsigned long val, unsigned long reg,
+			       unsigned long complete_mask)
+{
+	writel(val, l2x0_base + reg);
+	/* wait for the operation to complete */
+	while (readl(l2x0_base + reg) & complete_mask)
+		;
+}
+
+static inline void cache_sync(void)
+{
+	sync_writel(0, L2X0_CACHE_SYNC, 1);
+}
+
+static inline void l2x0_inv_all(void)
+{
+	/* invalidate all ways */
+	sync_writel(0xff, L2X0_INV_WAY, 0xff);
+	cache_sync();
+}
+
+static void l2x0_inv_range(unsigned long start, unsigned long end)
+{
+	unsigned long addr;
+
+	start &= ~(CACHE_LINE_SIZE - 1);
+	for (addr = start; addr < end; addr += CACHE_LINE_SIZE)
+		sync_writel(addr, L2X0_INV_LINE_PA, 1);
+	cache_sync();
+}
+
+static void l2x0_clean_range(unsigned long start, unsigned long end)
+{
+	unsigned long addr;
+
+	start &= ~(CACHE_LINE_SIZE - 1);
+	for (addr = start; addr < end; addr += CACHE_LINE_SIZE)
+		sync_writel(addr, L2X0_CLEAN_LINE_PA, 1);
+	cache_sync();
+}
+
+static void l2x0_flush_range(unsigned long start, unsigned long end)
+{
+	unsigned long addr;
+
+	start &= ~(CACHE_LINE_SIZE - 1);
+	for (addr = start; addr < end; addr += CACHE_LINE_SIZE)
+		sync_writel(addr, L2X0_CLEAN_INV_LINE_PA, 1);
+	cache_sync();
+}
+
+void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
+{
+	__u32 aux;
+
+	l2x0_base = base;
+
+	/* disable L2X0 */
+	writel(0, l2x0_base + L2X0_CTRL);
+
+	aux = readl(l2x0_base + L2X0_AUX_CTRL);
+	aux &= aux_mask;
+	aux |= aux_val;
+	writel(aux, l2x0_base + L2X0_AUX_CTRL);
+
+	l2x0_inv_all();
+
+	/* enable L2X0 */
+	writel(1, l2x0_base + L2X0_CTRL);
+
+	outer_cache.inv_range = l2x0_inv_range;
+	outer_cache.clean_range = l2x0_clean_range;
+	outer_cache.flush_range = l2x0_flush_range;
+
+	printk(KERN_INFO "L2X0 cache controller enabled\n");
+}
diff --git a/include/asm-arm/hardware/cache-l2x0.h b/include/asm-arm/hardware/cache-l2x0.h
new file mode 100644
index 0000000..54029a7
--- /dev/null
+++ b/include/asm-arm/hardware/cache-l2x0.h
@@ -0,0 +1,56 @@
+/*
+ * include/asm-arm/hardware/cache-l2x0.h
+ *
+ * Copyright (C) 2007 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_HARDWARE_L2X0_H
+#define __ASM_ARM_HARDWARE_L2X0_H
+
+#define L2X0_CACHE_ID			0x000
+#define L2X0_CACHE_TYPE			0x004
+#define L2X0_CTRL			0x100
+#define L2X0_AUX_CTRL			0x104
+#define L2X0_EVENT_CNT_CTRL		0x200
+#define L2X0_EVENT_CNT1_CFG		0x204
+#define L2X0_EVENT_CNT0_CFG		0x208
+#define L2X0_EVENT_CNT1_VAL		0x20C
+#define L2X0_EVENT_CNT0_VAL		0x210
+#define L2X0_INTR_MASK			0x214
+#define L2X0_MASKED_INTR_STAT		0x218
+#define L2X0_RAW_INTR_STAT		0x21C
+#define L2X0_INTR_CLEAR			0x220
+#define L2X0_CACHE_SYNC			0x730
+#define L2X0_INV_LINE_PA		0x770
+#define L2X0_INV_WAY			0x77C
+#define L2X0_CLEAN_LINE_PA		0x7B0
+#define L2X0_CLEAN_LINE_IDX		0x7B8
+#define L2X0_CLEAN_WAY			0x7BC
+#define L2X0_CLEAN_INV_LINE_PA		0x7F0
+#define L2X0_CLEAN_INV_LINE_IDX		0x7F8
+#define L2X0_CLEAN_INV_WAY		0x7FC
+#define L2X0_LOCKDOWN_WAY_D		0x900
+#define L2X0_LOCKDOWN_WAY_I		0x904
+#define L2X0_TEST_OPERATION		0xF00
+#define L2X0_LINE_DATA			0xF10
+#define L2X0_LINE_TAG			0xF30
+#define L2X0_DEBUG_CTRL			0xF40
+
+#ifndef __ASSEMBLY__
+extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask);
+#endif
+
+#endif
-- 
cgit v1.1


From 4c784ef76ac4443ab13648859f1b2a2737546cc1 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 9 Feb 2007 19:20:47 +0100
Subject: [ARM] 4155/1: S3C24XX: remove obj-dma-* from Makefile

In preperation for splitting the arch-s3c2410 directory
up, remove the use of obj-dma-y in the Makefile and move
to using CONFIG_S3C2440_DMA, CONFIG_S3C2412_DMA, etc.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-s3c2410/Kconfig  | 15 ++++++++++++++-
 arch/arm/mach-s3c2410/Makefile | 10 ++--------
 2 files changed, 16 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index eb4ec41..6329b40 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -192,10 +192,17 @@ config S3C2412_PM
 	help
 	  Internal config node to apply S3C2412 power management
 
+config S3C2412_DMA
+	bool
+	depends on CPU_S3C2412
+	help
+	  Internal config node for S3C2412 DMA support
+
 config CPU_S3C2412
 	bool
 	depends on ARCH_S3C2410
 	select S3C2412_PM if PM
+	select S3C2412_DMA if S3C2410_DMA
 	help
 	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
 
@@ -205,11 +212,18 @@ config CPU_S3C244X
 	help
 	  Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
 
+config S3C2440_DMA
+	bool
+	depends on ARCH_S3C2410 && CPU_S3C24405B
+	help
+	  Support for S3C2440 specific DMA code5A
+
 config CPU_S3C2440
 	bool
 	depends on ARCH_S3C2410
 	select S3C2410_CLOCK
 	select S3C2410_PM if PM
+	select S3C2440_DMA if S3C2410_DMA
 	select CPU_S3C244X
 	help
 	  Support for S3C2440 Samsung Mobile CPU based systems.
@@ -272,7 +286,6 @@ config S3C2410_DMA_DEBUG
 	  amount of time, as well as using an significant percentage of
 	  the CPU time doing so.
 
-
 config S3C2410_PM_DEBUG
 	bool "S3C2410 PM Suspend debug"
 	depends on ARCH_S3C2410 && PM
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 27663e2..85ffa12 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -9,8 +9,6 @@ obj-y			:= cpu.o irq.o time.o gpio.o clock.o devs.o
 obj-m			:=
 obj-n			:=
 obj-			:=
-obj-dma-y		:=
-obj-dma-n		:=
 
 # DMA
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
@@ -37,9 +35,9 @@ obj-$(CONFIG_PM_H1940)		+= pm-h1940.o
 obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o
 obj-$(CONFIG_CPU_S3C2412)	+= s3c2412-irq.o
 obj-$(CONFIG_CPU_S3C2412)	+= s3c2412-clock.o
-obj-dma-$(CONFIG_CPU_S3C2412)	+= s3c2412-dma.o
 
 obj-$(CONFIG_S3C2412_PM)	+= s3c2412-pm.o
+obj-$(CONFIG_S3C2412_DMA)	+= s3c2412-dma.o
 
 #
 # S3C244X support
@@ -57,7 +55,7 @@ obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o s3c2440-dsc.o
 obj-$(CONFIG_CPU_S3C2440)	+= s3c2440-irq.o
 obj-$(CONFIG_CPU_S3C2440)	+= s3c2440-clock.o
 obj-$(CONFIG_CPU_S3C2440)	+= s3c2410-gpio.o
-obj-dma-$(CONFIG_CPU_S3C2440)	+= s3c2440-dma.o
+obj-$(CONFIG_S3C2440_DMA)	+= s3c2440-dma.o
 
 # S3C2442 support
 
@@ -68,10 +66,6 @@ obj-$(CONFIG_CPU_S3C2442)	+= s3c2442-clock.o
 
 obj-$(CONFIG_BAST_PC104_IRQ)	+= bast-irq.o
 
-# merge in dma objects
-
-obj-y				+= $(obj-dma-y)
-
 # machine specific support
 
 obj-$(CONFIG_MACH_AML_M5900)	+= mach-amlm5900.o
-- 
cgit v1.1


From d19494b187b20e363f9b434b9ceab4159ac88324 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 9 Feb 2007 19:24:45 +0100
Subject: [ARM] 4156/1: S3C24XX: Add CONFIG_S3C2410_GPIO

In preperation for splitting the arch-s3c2410 directory
up, add a CONFIG_S3C2410_GPIO instead of implicitly
making the .o for CONFIG_CPU_S3C2410 and CONFIG_CPU_S3C2440

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-s3c2410/Kconfig  | 8 ++++++++
 arch/arm/mach-s3c2410/Makefile | 3 +--
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 6329b40..0ab590e 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -158,6 +158,11 @@ config S3C2410_CLOCK
 	help
 	  Clock code for the S3C2410, and similar processors
 
+config S3C2410_GPIO
+	bool
+	help
+	  GPIO code for S3C2410 and similar processors
+
 config S3C2410_PM
 	bool
 	help
@@ -174,6 +179,7 @@ config CPU_S3C2410
 	bool
 	depends on ARCH_S3C2410
 	select S3C2410_CLOCK
+	select S3C2410_GPIO
 	select S3C2410_PM if PM
 	help
 	  Support for S3C2410 and S3C2410A family from the S3C24XX line
@@ -223,6 +229,7 @@ config CPU_S3C2440
 	depends on ARCH_S3C2410
 	select S3C2410_CLOCK
 	select S3C2410_PM if PM
+	select S3C2410_GPIO
 	select S3C2440_DMA if S3C2410_DMA
 	select CPU_S3C244X
 	help
@@ -232,6 +239,7 @@ config CPU_S3C2442
 	bool
 	depends on ARCH_S3C2420
 	select S3C2410_CLOCK
+	select S3C2410_GPIO
 	select S3C2410_PM if PM
 	select CPU_S3C244X
 	help
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 85ffa12..1cc5feb 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -19,10 +19,10 @@ obj-$(CONFIG_CPU_S3C2400)	+= s3c2400-gpio.o
 # S3C2410 support files
 
 obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
-obj-$(CONFIG_CPU_S3C2410)	+= s3c2410-gpio.o
 obj-$(CONFIG_CPU_S3C2410)	+= s3c2410-irq.o
 
 obj-$(CONFIG_S3C2410_PM)	+= s3c2410-pm.o s3c2410-sleep.o
+obj-$(CONFIG_S3C2410_GPIO)	+= s3c2410-gpio.o
 obj-$(CONFIG_CPU_S3C2410_DMA)	+= s3c2410-dma.o
 
 # Power Management support
@@ -54,7 +54,6 @@ obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
 obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o s3c2440-dsc.o
 obj-$(CONFIG_CPU_S3C2440)	+= s3c2440-irq.o
 obj-$(CONFIG_CPU_S3C2440)	+= s3c2440-clock.o
-obj-$(CONFIG_CPU_S3C2440)	+= s3c2410-gpio.o
 obj-$(CONFIG_S3C2440_DMA)	+= s3c2440-dma.o
 
 # S3C2442 support
-- 
cgit v1.1


From a21765a70ec06be175d3997320a83fa66fcc8955 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sun, 11 Feb 2007 18:31:01 +0100
Subject: [ARM] 4157/2: S3C24XX: move arch/arch/mach-s3c2410 into cpu
 components

The following patch and script moves the arch/arm/mach-s3c2410
directory into arch/arm/plat-s3c24xx for the generic core code
and inti arch/arm/mach-s3c{cpu} for the cpu/machine support files

Include directory include/asm-arm/plat-s3c24xx is added for the
core include files.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                           |    8 +
 arch/arm/Makefile                          |    7 +-
 arch/arm/mach-s3c2400/Kconfig              |   13 +
 arch/arm/mach-s3c2400/Makefile             |   15 +
 arch/arm/mach-s3c2400/gpio.c               |   42 +
 arch/arm/mach-s3c2410/Kconfig              |  356 ++-----
 arch/arm/mach-s3c2410/Makefile             |   95 +-
 arch/arm/mach-s3c2410/bast-irq.c           |    2 +-
 arch/arm/mach-s3c2410/bast.h               |    2 +-
 arch/arm/mach-s3c2410/clock.c              |  565 ++++------
 arch/arm/mach-s3c2410/clock.h              |   63 --
 arch/arm/mach-s3c2410/common-smdk.c        |  200 ----
 arch/arm/mach-s3c2410/common-smdk.h        |   15 -
 arch/arm/mach-s3c2410/cpu.c                |  357 -------
 arch/arm/mach-s3c2410/cpu.h                |   69 --
 arch/arm/mach-s3c2410/devs.c               |  585 -----------
 arch/arm/mach-s3c2410/devs.h               |   51 -
 arch/arm/mach-s3c2410/dma.c                | 1528 +++-------------------------
 arch/arm/mach-s3c2410/dma.h                |   45 -
 arch/arm/mach-s3c2410/gpio.c               |  165 +--
 arch/arm/mach-s3c2410/irq.c                |  775 +-------------
 arch/arm/mach-s3c2410/irq.h                |  107 --
 arch/arm/mach-s3c2410/mach-amlm5900.c      |    6 +-
 arch/arm/mach-s3c2410/mach-anubis.c        |  325 ------
 arch/arm/mach-s3c2410/mach-bast.c          |    6 +-
 arch/arm/mach-s3c2410/mach-h1940.c         |    8 +-
 arch/arm/mach-s3c2410/mach-n30.c           |    8 +-
 arch/arm/mach-s3c2410/mach-nexcoder.c      |  158 ---
 arch/arm/mach-s3c2410/mach-osiris.c        |  303 ------
 arch/arm/mach-s3c2410/mach-otom.c          |    8 +-
 arch/arm/mach-s3c2410/mach-rx3715.c        |  244 -----
 arch/arm/mach-s3c2410/mach-smdk2410.c      |    8 +-
 arch/arm/mach-s3c2410/mach-smdk2413.c      |  140 ---
 arch/arm/mach-s3c2410/mach-smdk2440.c      |  208 ----
 arch/arm/mach-s3c2410/mach-vr1000.c        |    6 +-
 arch/arm/mach-s3c2410/mach-vstms.c         |  169 ---
 arch/arm/mach-s3c2410/pm-simtec.c          |   66 --
 arch/arm/mach-s3c2410/pm.c                 |  653 ++----------
 arch/arm/mach-s3c2410/pm.h                 |   73 --
 arch/arm/mach-s3c2410/s3c2400-gpio.c       |   42 -
 arch/arm/mach-s3c2410/s3c2400.h            |   31 -
 arch/arm/mach-s3c2410/s3c2410-clock.c      |  276 -----
 arch/arm/mach-s3c2410/s3c2410-dma.c        |  161 ---
 arch/arm/mach-s3c2410/s3c2410-gpio.c       |   71 --
 arch/arm/mach-s3c2410/s3c2410-irq.c        |   48 -
 arch/arm/mach-s3c2410/s3c2410-pm.c         |  156 ---
 arch/arm/mach-s3c2410/s3c2410-sleep.S      |   68 --
 arch/arm/mach-s3c2410/s3c2410.c            |    8 +-
 arch/arm/mach-s3c2410/s3c2410.h            |   31 -
 arch/arm/mach-s3c2410/s3c2412-clock.c      |  716 -------------
 arch/arm/mach-s3c2410/s3c2412-dma.c        |  161 ---
 arch/arm/mach-s3c2410/s3c2412-irq.c        |  133 ---
 arch/arm/mach-s3c2410/s3c2412-pm.c         |  128 ---
 arch/arm/mach-s3c2410/s3c2412.c            |  181 ----
 arch/arm/mach-s3c2410/s3c2412.h            |   29 -
 arch/arm/mach-s3c2410/s3c2440-clock.c      |  170 ----
 arch/arm/mach-s3c2410/s3c2440-dma.c        |  165 ---
 arch/arm/mach-s3c2410/s3c2440-dsc.c        |   54 -
 arch/arm/mach-s3c2410/s3c2440-irq.c        |  130 ---
 arch/arm/mach-s3c2410/s3c2440.c            |   52 -
 arch/arm/mach-s3c2410/s3c2440.h            |   17 -
 arch/arm/mach-s3c2410/s3c2442-clock.c      |  171 ----
 arch/arm/mach-s3c2410/s3c2442.c            |   34 -
 arch/arm/mach-s3c2410/s3c2442.h            |   17 -
 arch/arm/mach-s3c2410/s3c244x-irq.c        |  146 ---
 arch/arm/mach-s3c2410/s3c244x.c            |  184 ----
 arch/arm/mach-s3c2410/s3c244x.h            |   25 -
 arch/arm/mach-s3c2410/sleep.S              |  151 +--
 arch/arm/mach-s3c2410/time.c               |  262 -----
 arch/arm/mach-s3c2410/usb-simtec.c         |    2 +-
 arch/arm/mach-s3c2412/Kconfig              |   58 ++
 arch/arm/mach-s3c2412/Makefile             |   21 +
 arch/arm/mach-s3c2412/clock.c              |  716 +++++++++++++
 arch/arm/mach-s3c2412/dma.c                |  161 +++
 arch/arm/mach-s3c2412/irq.c                |  133 +++
 arch/arm/mach-s3c2412/mach-smdk2413.c      |  140 +++
 arch/arm/mach-s3c2412/mach-vstms.c         |  169 +++
 arch/arm/mach-s3c2412/pm.c                 |  128 +++
 arch/arm/mach-s3c2412/s3c2412.c            |  181 ++++
 arch/arm/mach-s3c2440/Kconfig              |   71 ++
 arch/arm/mach-s3c2440/Makefile             |   23 +
 arch/arm/mach-s3c2440/clock.c              |  170 ++++
 arch/arm/mach-s3c2440/dma.c                |  165 +++
 arch/arm/mach-s3c2440/dsc.c                |   54 +
 arch/arm/mach-s3c2440/irq.c                |  130 +++
 arch/arm/mach-s3c2440/mach-anubis.c        |  325 ++++++
 arch/arm/mach-s3c2440/mach-nexcoder.c      |  158 +++
 arch/arm/mach-s3c2440/mach-osiris.c        |  303 ++++++
 arch/arm/mach-s3c2440/mach-rx3715.c        |  244 +++++
 arch/arm/mach-s3c2440/mach-smdk2440.c      |  208 ++++
 arch/arm/mach-s3c2440/s3c2440.c            |   52 +
 arch/arm/mach-s3c2442/Kconfig              |   27 +
 arch/arm/mach-s3c2442/Makefile             |   16 +
 arch/arm/mach-s3c2442/clock.c              |  171 ++++
 arch/arm/mach-s3c2442/s3c2442.c            |   34 +
 arch/arm/plat-s3c24xx/Kconfig              |   96 ++
 arch/arm/plat-s3c24xx/Makefile             |   30 +
 arch/arm/plat-s3c24xx/clock.c              |  449 ++++++++
 arch/arm/plat-s3c24xx/common-smdk.c        |  200 ++++
 arch/arm/plat-s3c24xx/cpu.c                |  357 +++++++
 arch/arm/plat-s3c24xx/devs.c               |  585 +++++++++++
 arch/arm/plat-s3c24xx/dma.c                | 1441 ++++++++++++++++++++++++++
 arch/arm/plat-s3c24xx/gpio.c               |  188 ++++
 arch/arm/plat-s3c24xx/irq.c                |  801 +++++++++++++++
 arch/arm/plat-s3c24xx/pm-simtec.c          |   66 ++
 arch/arm/plat-s3c24xx/pm.c                 |  659 ++++++++++++
 arch/arm/plat-s3c24xx/s3c244x-irq.c        |  146 +++
 arch/arm/plat-s3c24xx/s3c244x.c            |  184 ++++
 arch/arm/plat-s3c24xx/s3c244x.h            |   25 +
 arch/arm/plat-s3c24xx/sleep.S              |  159 +++
 arch/arm/plat-s3c24xx/time.c               |  262 +++++
 include/asm-arm/plat-s3c24xx/clock.h       |   63 ++
 include/asm-arm/plat-s3c24xx/common-smdk.h |   15 +
 include/asm-arm/plat-s3c24xx/cpu.h         |   69 ++
 include/asm-arm/plat-s3c24xx/devs.h        |   51 +
 include/asm-arm/plat-s3c24xx/dma.h         |   45 +
 include/asm-arm/plat-s3c24xx/irq.h         |  107 ++
 include/asm-arm/plat-s3c24xx/pm.h          |   73 ++
 include/asm-arm/plat-s3c24xx/s3c2400.h     |   31 +
 include/asm-arm/plat-s3c24xx/s3c2410.h     |   31 +
 include/asm-arm/plat-s3c24xx/s3c2412.h     |   29 +
 include/asm-arm/plat-s3c24xx/s3c2440.h     |   17 +
 include/asm-arm/plat-s3c24xx/s3c2442.h     |   17 +
 123 files changed, 10711 insertions(+), 10617 deletions(-)
 create mode 100644 arch/arm/mach-s3c2400/Kconfig
 create mode 100644 arch/arm/mach-s3c2400/Makefile
 create mode 100644 arch/arm/mach-s3c2400/gpio.c
 delete mode 100644 arch/arm/mach-s3c2410/clock.h
 delete mode 100644 arch/arm/mach-s3c2410/common-smdk.c
 delete mode 100644 arch/arm/mach-s3c2410/common-smdk.h
 delete mode 100644 arch/arm/mach-s3c2410/cpu.c
 delete mode 100644 arch/arm/mach-s3c2410/cpu.h
 delete mode 100644 arch/arm/mach-s3c2410/devs.c
 delete mode 100644 arch/arm/mach-s3c2410/devs.h
 delete mode 100644 arch/arm/mach-s3c2410/dma.h
 delete mode 100644 arch/arm/mach-s3c2410/irq.h
 delete mode 100644 arch/arm/mach-s3c2410/mach-anubis.c
 delete mode 100644 arch/arm/mach-s3c2410/mach-nexcoder.c
 delete mode 100644 arch/arm/mach-s3c2410/mach-osiris.c
 delete mode 100644 arch/arm/mach-s3c2410/mach-rx3715.c
 delete mode 100644 arch/arm/mach-s3c2410/mach-smdk2413.c
 delete mode 100644 arch/arm/mach-s3c2410/mach-smdk2440.c
 delete mode 100644 arch/arm/mach-s3c2410/mach-vstms.c
 delete mode 100644 arch/arm/mach-s3c2410/pm-simtec.c
 delete mode 100644 arch/arm/mach-s3c2410/pm.h
 delete mode 100644 arch/arm/mach-s3c2410/s3c2400-gpio.c
 delete mode 100644 arch/arm/mach-s3c2410/s3c2400.h
 delete mode 100644 arch/arm/mach-s3c2410/s3c2410-clock.c
 delete mode 100644 arch/arm/mach-s3c2410/s3c2410-dma.c
 delete mode 100644 arch/arm/mach-s3c2410/s3c2410-gpio.c
 delete mode 100644 arch/arm/mach-s3c2410/s3c2410-irq.c
 delete mode 100644 arch/arm/mach-s3c2410/s3c2410-pm.c
 delete mode 100644 arch/arm/mach-s3c2410/s3c2410-sleep.S
 delete mode 100644 arch/arm/mach-s3c2410/s3c2410.h
 delete mode 100644 arch/arm/mach-s3c2410/s3c2412-clock.c
 delete mode 100644 arch/arm/mach-s3c2410/s3c2412-dma.c
 delete mode 100644 arch/arm/mach-s3c2410/s3c2412-irq.c
 delete mode 100644 arch/arm/mach-s3c2410/s3c2412-pm.c
 delete mode 100644 arch/arm/mach-s3c2410/s3c2412.c
 delete mode 100644 arch/arm/mach-s3c2410/s3c2412.h
 delete mode 100644 arch/arm/mach-s3c2410/s3c2440-clock.c
 delete mode 100644 arch/arm/mach-s3c2410/s3c2440-dma.c
 delete mode 100644 arch/arm/mach-s3c2410/s3c2440-dsc.c
 delete mode 100644 arch/arm/mach-s3c2410/s3c2440-irq.c
 delete mode 100644 arch/arm/mach-s3c2410/s3c2440.c
 delete mode 100644 arch/arm/mach-s3c2410/s3c2440.h
 delete mode 100644 arch/arm/mach-s3c2410/s3c2442-clock.c
 delete mode 100644 arch/arm/mach-s3c2410/s3c2442.c
 delete mode 100644 arch/arm/mach-s3c2410/s3c2442.h
 delete mode 100644 arch/arm/mach-s3c2410/s3c244x-irq.c
 delete mode 100644 arch/arm/mach-s3c2410/s3c244x.c
 delete mode 100644 arch/arm/mach-s3c2410/s3c244x.h
 delete mode 100644 arch/arm/mach-s3c2410/time.c
 create mode 100644 arch/arm/mach-s3c2412/Kconfig
 create mode 100644 arch/arm/mach-s3c2412/Makefile
 create mode 100644 arch/arm/mach-s3c2412/clock.c
 create mode 100644 arch/arm/mach-s3c2412/dma.c
 create mode 100644 arch/arm/mach-s3c2412/irq.c
 create mode 100644 arch/arm/mach-s3c2412/mach-smdk2413.c
 create mode 100644 arch/arm/mach-s3c2412/mach-vstms.c
 create mode 100644 arch/arm/mach-s3c2412/pm.c
 create mode 100644 arch/arm/mach-s3c2412/s3c2412.c
 create mode 100644 arch/arm/mach-s3c2440/Kconfig
 create mode 100644 arch/arm/mach-s3c2440/Makefile
 create mode 100644 arch/arm/mach-s3c2440/clock.c
 create mode 100644 arch/arm/mach-s3c2440/dma.c
 create mode 100644 arch/arm/mach-s3c2440/dsc.c
 create mode 100644 arch/arm/mach-s3c2440/irq.c
 create mode 100644 arch/arm/mach-s3c2440/mach-anubis.c
 create mode 100644 arch/arm/mach-s3c2440/mach-nexcoder.c
 create mode 100644 arch/arm/mach-s3c2440/mach-osiris.c
 create mode 100644 arch/arm/mach-s3c2440/mach-rx3715.c
 create mode 100644 arch/arm/mach-s3c2440/mach-smdk2440.c
 create mode 100644 arch/arm/mach-s3c2440/s3c2440.c
 create mode 100644 arch/arm/mach-s3c2442/Kconfig
 create mode 100644 arch/arm/mach-s3c2442/Makefile
 create mode 100644 arch/arm/mach-s3c2442/clock.c
 create mode 100644 arch/arm/mach-s3c2442/s3c2442.c
 create mode 100644 arch/arm/plat-s3c24xx/Kconfig
 create mode 100644 arch/arm/plat-s3c24xx/Makefile
 create mode 100644 arch/arm/plat-s3c24xx/clock.c
 create mode 100644 arch/arm/plat-s3c24xx/common-smdk.c
 create mode 100644 arch/arm/plat-s3c24xx/cpu.c
 create mode 100644 arch/arm/plat-s3c24xx/devs.c
 create mode 100644 arch/arm/plat-s3c24xx/dma.c
 create mode 100644 arch/arm/plat-s3c24xx/gpio.c
 create mode 100644 arch/arm/plat-s3c24xx/irq.c
 create mode 100644 arch/arm/plat-s3c24xx/pm-simtec.c
 create mode 100644 arch/arm/plat-s3c24xx/pm.c
 create mode 100644 arch/arm/plat-s3c24xx/s3c244x-irq.c
 create mode 100644 arch/arm/plat-s3c24xx/s3c244x.c
 create mode 100644 arch/arm/plat-s3c24xx/s3c244x.h
 create mode 100644 arch/arm/plat-s3c24xx/sleep.S
 create mode 100644 arch/arm/plat-s3c24xx/time.c
 create mode 100644 include/asm-arm/plat-s3c24xx/clock.h
 create mode 100644 include/asm-arm/plat-s3c24xx/common-smdk.h
 create mode 100644 include/asm-arm/plat-s3c24xx/cpu.h
 create mode 100644 include/asm-arm/plat-s3c24xx/devs.h
 create mode 100644 include/asm-arm/plat-s3c24xx/dma.h
 create mode 100644 include/asm-arm/plat-s3c24xx/irq.h
 create mode 100644 include/asm-arm/plat-s3c24xx/pm.h
 create mode 100644 include/asm-arm/plat-s3c24xx/s3c2400.h
 create mode 100644 include/asm-arm/plat-s3c24xx/s3c2410.h
 create mode 100644 include/asm-arm/plat-s3c24xx/s3c2412.h
 create mode 100644 include/asm-arm/plat-s3c24xx/s3c2440.h
 create mode 100644 include/asm-arm/plat-s3c24xx/s3c2442.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6783c2e..51ee13e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -363,7 +363,15 @@ source "arch/arm/mach-omap1/Kconfig"
 
 source "arch/arm/mach-omap2/Kconfig"
 
+source "arch/arm/plat-s3c24xx/Kconfig"
+
+if ARCH_S3C2410
+source "arch/arm/mach-s3c2400/Kconfig"
 source "arch/arm/mach-s3c2410/Kconfig"
+source "arch/arm/mach-s3c2412/Kconfig"
+source "arch/arm/mach-s3c2440/Kconfig"
+source "arch/arm/mach-s3c2442/Kconfig"
+endif
 
 source "arch/arm/mach-lh7a40x/Kconfig"
 
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 000f110..2df1ea0 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -149,7 +149,7 @@ MACHINE  := arch/arm/mach-$(machine-y)/
 else
 MACHINE  :=
 endif
-  
+
 export	TEXT_OFFSET GZFLAGS MMUEXT
 
 # Do we have FASTFPE?
@@ -161,6 +161,10 @@ endif
 # If we have a machine-specific directory, then include it in the build.
 core-y				+= arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
 core-y				+= $(MACHINE)
+core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2400/
+core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2412/
+core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2440/
+core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2442/
 core-$(CONFIG_FPE_NWFPE)	+= arch/arm/nwfpe/
 core-$(CONFIG_FPE_FASTFPE)	+= $(FASTFPE_OBJ)
 core-$(CONFIG_VFP)		+= arch/arm/vfp/
@@ -168,6 +172,7 @@ core-$(CONFIG_VFP)		+= arch/arm/vfp/
 # If we have a common platform directory, then include it in the build.
 core-$(CONFIG_PLAT_IOP)		+= arch/arm/plat-iop/
 core-$(CONFIG_ARCH_OMAP)	+= arch/arm/plat-omap/
+core-$(CONFIG_PLAT_S3C24XX)		+= arch/arm/plat-s3c24xx/
 
 drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/
 drivers-$(CONFIG_ARCH_CLPS7500)	+= drivers/acorn/char/
diff --git a/arch/arm/mach-s3c2400/Kconfig b/arch/arm/mach-s3c2400/Kconfig
new file mode 100644
index 0000000..deab0722
--- /dev/null
+++ b/arch/arm/mach-s3c2400/Kconfig
@@ -0,0 +1,13 @@
+# arch/arm/mach-s3c2400/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+
+
+menu "S3C2400 Machines"
+
+
+endmenu
+
diff --git a/arch/arm/mach-s3c2400/Makefile b/arch/arm/mach-s3c2400/Makefile
new file mode 100644
index 0000000..7e23f4e
--- /dev/null
+++ b/arch/arm/mach-s3c2400/Makefile
@@ -0,0 +1,15 @@
+# arch/arm/mach-s3c2400/Makefile
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+obj-$(CONFIG_CPU_S3C2400)	+= gpio.o
+
+# Machine support
+
diff --git a/arch/arm/mach-s3c2400/gpio.c b/arch/arm/mach-s3c2400/gpio.c
new file mode 100644
index 0000000..758e1604
--- /dev/null
+++ b/arch/arm/mach-s3c2400/gpio.c
@@ -0,0 +1,42 @@
+/* linux/arch/arm/mach-s3c2400/gpio.c
+ *
+ * Copyright (c) 2006 Lucas Correia Villa Real <lucasvr@gobolinux.org>
+ *
+ * S3C2400 GPIO support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-gpio.h>
+
+int s3c2400_gpio_getirq(unsigned int pin)
+{
+	if (pin < S3C2410_GPE0 || pin > S3C2400_GPE7_EINT7)
+		return -1;  /* not valid interrupts */
+
+	return (pin - S3C2410_GPE0) + IRQ_EINT0;
+}
+
+EXPORT_SYMBOL(s3c2400_gpio_getirq);
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 0ab590e..016b53f 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -1,54 +1,51 @@
-if ARCH_S3C2410
+# arch/arm/mach-s3c2410/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
 
-menu "S3C24XX Implementations"
+config CPU_S3C2410
+	bool
+	depends on ARCH_S3C2410
+	select S3C2410_CLOCK
+	select S3C2410_GPIO
+	select S3C2410_PM if PM
+	help
+	  Support for S3C2410 and S3C2410A family from the S3C24XX line
+	  of Samsung Mobile CPUs.
 
-config MACH_AML_M5900
-	bool "AML M5900 Series"
-	select CPU_S3C2410
-	select PM_SIMTEC if PM
+config CPU_S3C2410_DMA
+	bool
+	depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442)
+	default y if CPU_S3C2410 || CPU_S3C2442
 	help
-	   Say Y here if you are using the American Microsystems M5900 Series
-           <http://www.amltd.com>
+	  DMA device selection for S3C2410 and compatible CPUs
 
-config MACH_ANUBIS
-	bool "Simtec Electronics ANUBIS"
-	select CPU_S3C2440
-	select PM_SIMTEC if PM
+config S3C2410_PM
+	bool
 	help
-	  Say Y here if you are using the Simtec Electronics ANUBIS
-	  development system
+	  Power Management code common to S3C2410 and better
 
-config MACH_OSIRIS
-	bool "Simtec IM2440D20 (OSIRIS) module"
-	select CPU_S3C2440
-	select PM_SIMTEC if PM
+config S3C2410_GPIO
+	bool
 	help
-	  Say Y here if you are using the Simtec IM2440D20 module, also
-	  known as the Osiris.
+	  GPIO code for S3C2410 and similar processors
 
-config ARCH_BAST
-	bool "Simtec Electronics BAST (EB2410ITX)"
-	select CPU_S3C2410
-	select PM_SIMTEC if PM
-	select ISA
+config S3C2410_CLOCK
+	bool
 	help
-	  Say Y here if you are using the Simtec Electronics EB2410ITX
-	  development board (also known as BAST)
+	  Clock code for the S3C2410, and similar processors
 
-	  Product page: <http://www.simtec.co.uk/products/EB2410ITX/>.
 
-config BAST_PC104_IRQ
-	bool "BAST PC104 IRQ support"
-	depends on ARCH_BAST
-	default y
-	help
-	  Say Y	here to enable the PC104 IRQ routing on the
-	  Simtec BAST (EB2410ITX)
+menu "S3C2410 Machines"
 
-config PM_H1940
-	bool
+config ARCH_SMDK2410
+	bool "SMDK2410/A9M2410"
+	select CPU_S3C2410
+	select MACH_SMDK
 	help
-	  Internal node for H1940 and related PM
+	   Say Y here if you are using the SMDK2410 or the derived module A9M2410
+           <http://www.fsforth.de>
 
 config ARCH_H1940
 	bool "IPAQ H1940"
@@ -57,7 +54,10 @@ config ARCH_H1940
 	help
 	  Say Y here if you are using the HP IPAQ H1940
 
-	  <http://www.handhelds.org/projects/h1940.html>.
+config PM_H1940
+	bool
+	help
+	  Internal node for H1940 and related PM
 
 config MACH_N30
 	bool "Acer N30"
@@ -65,53 +65,36 @@ config MACH_N30
 	help
 	  Say Y here if you are using the Acer N30
 
-	  <http://zoo.weinigel.se/n30>.
-
-config MACH_SMDK
-	bool
-	help
-	  Common machine code for SMDK2410 and SMDK2440
-
-config ARCH_SMDK2410
-	bool "SMDK2410/A9M2410"
+config ARCH_BAST
+	bool "Simtec Electronics BAST (EB2410ITX)"
 	select CPU_S3C2410
-	select MACH_SMDK
+	select PM_SIMTEC if PM
+	select ISA
 	help
-	   Say Y here if you are using the SMDK2410 or the derived module A9M2410
-           <http://www.fsforth.de>
+	  Say Y here if you are using the Simtec Electronics EB2410ITX
+	  development board (also known as BAST)
 
-config ARCH_S3C2440
-	bool "SMDK2440"
-	select CPU_S3C2440
-	select MACH_SMDK
+config MACH_OTOM
+ 	bool "NexVision OTOM Board"
+ 	select CPU_S3C2410
 	help
-	  Say Y here if you are using the SMDK2440.
-
-config SMDK2440_CPU2440
-	bool "SMDK2440 with S3C2440 CPU module"
-	depends on ARCH_S3C2440
-	default y if ARCH_S3C2440
-	select CPU_S3C2440
-
-config SMDK2440_CPU2442
-	bool "SMDM2440 with S3C2442 CPU module"
-	depends on ARCH_S3C2440
-	select CPU_S3C2442
+ 	  Say Y here if you are using the Nex Vision OTOM board
 
-config MACH_S3C2413
-	bool
+config MACH_AML_M5900
+	bool "AML M5900 Series"
+	select CPU_S3C2410
+	select PM_SIMTEC if PM
 	help
-	  Internal node for S3C2413 version of SMDK2413, so that
-	  machine_is_s3c2413() will work when MACH_SMDK2413 is
-	  selected
+	   Say Y here if you are using the American Microsystems M5900 Series
+           <http://www.amltd.com>
 
-config MACH_SMDK2413
-	bool "SMDK2413"
-	select CPU_S3C2412
-	select MACH_S3C2413
-	select MACH_SMDK
+config BAST_PC104_IRQ
+	bool "BAST PC104 IRQ support"
+	depends on ARCH_BAST
+	default y
 	help
-	  Say Y here if you are using an SMDK2413
+	  Say Y	here to enable the PC104 IRQ routing on the
+	  Simtec BAST (EB2410ITX)
 
 config MACH_VR1000
 	bool "Thorcom VR1000"
@@ -120,223 +103,6 @@ config MACH_VR1000
 	help
 	  Say Y here if you are using the Thorcom VR1000 board.
 
-	  This linux port is currently being maintained by Simtec, on behalf
-	  of Thorcom. Any queries, please contact Thorcom first.
-
-config MACH_RX3715
-	bool "HP iPAQ rx3715"
-	select CPU_S3C2440
-	select PM_H1940 if PM
-	help
-	  Say Y here if you are using the HP iPAQ rx3715.
-
-	  See <http://www.handhelds.org/projects/rx3715.html> for more
-	  information on this project
-
-config MACH_OTOM
- 	bool "NexVision OTOM Board"
- 	select CPU_S3C2410
-	help
- 	  Say Y here if you are using the Nex Vision OTOM board
-
-config MACH_NEXCODER_2440
- 	bool "NexVision NEXCODER 2440 Light Board"
- 	select CPU_S3C2440
-	help
- 	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
-
-config MACH_VSTMS
-	bool "VMSTMS"
-	select CPU_S3C2412
-	help
-	  Say Y here if you are using an VSTMS board
 
 endmenu
 
-config S3C2410_CLOCK
-	bool
-	help
-	  Clock code for the S3C2410, and similar processors
-
-config S3C2410_GPIO
-	bool
-	help
-	  GPIO code for S3C2410 and similar processors
-
-config S3C2410_PM
-	bool
-	help
-	  Power Management code common to S3C2410 and better
-
-config CPU_S3C2410_DMA
-	bool
-	depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442)
-	default y if CPU_S3C2410 || CPU_S3C2442
-	help
-	  DMA device selection for S3C2410 and compatible CPUs
-
-config CPU_S3C2410
-	bool
-	depends on ARCH_S3C2410
-	select S3C2410_CLOCK
-	select S3C2410_GPIO
-	select S3C2410_PM if PM
-	help
-	  Support for S3C2410 and S3C2410A family from the S3C24XX line
-	  of Samsung Mobile CPUs.
-
-# internal node to signify if we are only dealing with an S3C2412
-
-config CPU_S3C2412_ONLY
-	bool
-	depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
-		   !CPU_S3C2440 && !CPU_S3C2442 && CPU_S3C2412
-	default y if CPU_S3C2412
-
-config S3C2412_PM
-	bool
-	help
-	  Internal config node to apply S3C2412 power management
-
-config S3C2412_DMA
-	bool
-	depends on CPU_S3C2412
-	help
-	  Internal config node for S3C2412 DMA support
-
-config CPU_S3C2412
-	bool
-	depends on ARCH_S3C2410
-	select S3C2412_PM if PM
-	select S3C2412_DMA if S3C2410_DMA
-	help
-	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
-
-config CPU_S3C244X
-	bool
-	depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
-	help
-	  Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
-
-config S3C2440_DMA
-	bool
-	depends on ARCH_S3C2410 && CPU_S3C24405B
-	help
-	  Support for S3C2440 specific DMA code5A
-
-config CPU_S3C2440
-	bool
-	depends on ARCH_S3C2410
-	select S3C2410_CLOCK
-	select S3C2410_PM if PM
-	select S3C2410_GPIO
-	select S3C2440_DMA if S3C2410_DMA
-	select CPU_S3C244X
-	help
-	  Support for S3C2440 Samsung Mobile CPU based systems.
-
-config CPU_S3C2442
-	bool
-	depends on ARCH_S3C2420
-	select S3C2410_CLOCK
-	select S3C2410_GPIO
-	select S3C2410_PM if PM
-	select CPU_S3C244X
-	help
-	  Support for S3C2442 Samsung Mobile CPU based systems.
-
-comment "S3C2410 Boot"
-
-config S3C2410_BOOT_WATCHDOG
-	bool "S3C2410 Initialisation watchdog"
-	depends on ARCH_S3C2410 && S3C2410_WATCHDOG
-	help
-	  Say y to enable the watchdog during the kernel decompression
-	  stage. If the kernel fails to uncompress, then the watchdog
-	  will trigger a reset and the system should restart.
-
-	  Although this uses the same hardware unit as the kernel watchdog
-	  driver, it is not a replacement for it. If you use this option,
-	  you will have to use the watchdg driver to either stop the timeout
-	  or restart it. If you do not, then your kernel will reboot after
-	  startup.
-
-	  The driver uses a fixed timeout value, so the exact time till the
-	  system resets depends on the value of PCLK. The timeout on an
-	  200MHz s3c2410 should be about 30 seconds.
-
-config S3C2410_BOOT_ERROR_RESET
-	bool "S3C2410 Reboot on decompression error"
-	depends on ARCH_S3C2410
-	help
-	  Say y here to use the watchdog to reset the system if the
-	  kernel decompressor detects an error during decompression.
-
-
-comment "S3C2410 Setup"
-
-config S3C2410_DMA
-	bool "S3C2410 DMA support"
-	depends on ARCH_S3C2410
-	help
-	  S3C2410 DMA support. This is needed for drivers like sound which
-	  use the S3C2410's DMA system to move data to and from the
-	  peripheral blocks.
-
-config S3C2410_DMA_DEBUG
-	bool "S3C2410 DMA support debug"
-	depends on ARCH_S3C2410 && S3C2410_DMA
-	help
-	  Enable debugging output for the DMA code. This option sends info
-	  to the kernel log, at priority KERN_DEBUG.
-
-	  Note, it is easy to create and fill the log buffer in a small
-	  amount of time, as well as using an significant percentage of
-	  the CPU time doing so.
-
-config S3C2410_PM_DEBUG
-	bool "S3C2410 PM Suspend debug"
-	depends on ARCH_S3C2410 && PM
-	help
-	  Say Y here if you want verbose debugging from the PM Suspend and
-	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
-	  for more information.
-
-config S3C2410_PM_CHECK
-	bool "S3C2410 PM Suspend Memory CRC"
-	depends on ARCH_S3C2410 && PM && CRC32
-	help
- 	  Enable the PM code's memory area checksum over sleep. This option
-	  will generate CRCs of all blocks of memory, and store them before
-	  going to sleep. The blocks are then checked on resume for any
-	  errors.
-
-config S3C2410_PM_CHECK_CHUNKSIZE
-	int "S3C2410 PM Suspend CRC Chunksize (KiB)"
-	depends on ARCH_S3C2410 && PM && S3C2410_PM_CHECK
-	default 64
-	help
-	  Set the chunksize in Kilobytes of the CRC for checking memory
-	  corruption over suspend and resume. A smaller value will mean that
-	  the CRC data block will take more memory, but wil identify any
-	  faults with better precision.
-
-config PM_SIMTEC
-	bool
-	help
-	  Common power management code for systems that are
-	  compatible with the Simtec style of power management
-
-config S3C2410_LOWLEVEL_UART_PORT
-	int "S3C2410 UART to use for low-level messages"
-	default 0
-	help
-	  Choice of which UART port to use for the low-level messages,
-	  such as the `Uncompressing...` at start time. The value of
-	  this configuration should be between zero and two. The port
-	  must have been initialised by the boot-loader before use.
-
-	  Note, this does not affect the port used by the debug messages,
-	  which is a separate configuration.
-
-endif
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 1cc5feb..b33ac5b 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -1,85 +1,30 @@
-
+# arch/arm/mach-s3c2410/Makefile
 #
-# Makefile for the linux kernel.
+# Copyright 2007 Simtec Electronics
 #
+# Licensed under GPLv2
 
-# Object file lists.
-
-obj-y			:= cpu.o irq.o time.o gpio.o clock.o devs.o
-obj-m			:=
-obj-n			:=
-obj-			:=
-
-# DMA
-obj-$(CONFIG_S3C2410_DMA)	+= dma.o
-
-# S3C2400 support files
-obj-$(CONFIG_CPU_S3C2400)	+= s3c2400-gpio.o
-
-# S3C2410 support files
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
 
 obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
-obj-$(CONFIG_CPU_S3C2410)	+= s3c2410-irq.o
-
-obj-$(CONFIG_S3C2410_PM)	+= s3c2410-pm.o s3c2410-sleep.o
-obj-$(CONFIG_S3C2410_GPIO)	+= s3c2410-gpio.o
-obj-$(CONFIG_CPU_S3C2410_DMA)	+= s3c2410-dma.o
-
-# Power Management support
-
-obj-$(CONFIG_PM)		+= pm.o sleep.o
-obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
-obj-$(CONFIG_PM_H1940)		+= pm-h1940.o
-
-# S3C2412 support
-obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o
-obj-$(CONFIG_CPU_S3C2412)	+= s3c2412-irq.o
-obj-$(CONFIG_CPU_S3C2412)	+= s3c2412-clock.o
-
-obj-$(CONFIG_S3C2412_PM)	+= s3c2412-pm.o
-obj-$(CONFIG_S3C2412_DMA)	+= s3c2412-dma.o
-
-#
-# S3C244X support
-
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-irq.o
-
-# Clock control
-
-obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
-
-# S3C2440 support
+obj-$(CONFIG_CPU_S3C2410)	+= irq.o
+obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
+obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
+obj-$(CONFIG_S3C2410_PM)	+= pm.o sleep.o
+obj-$(CONFIG_S3C2410_GPIO)	+= gpio.o
+obj-$(CONFIG_S3C2410_CLOCK)	+= clock.o
 
-obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o s3c2440-dsc.o
-obj-$(CONFIG_CPU_S3C2440)	+= s3c2440-irq.o
-obj-$(CONFIG_CPU_S3C2440)	+= s3c2440-clock.o
-obj-$(CONFIG_S3C2440_DMA)	+= s3c2440-dma.o
+# Machine support
 
-# S3C2442 support
-
-obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
-obj-$(CONFIG_CPU_S3C2442)	+= s3c2442-clock.o
-
-# bast extras
-
-obj-$(CONFIG_BAST_PC104_IRQ)	+= bast-irq.o
-
-# machine specific support
-
-obj-$(CONFIG_MACH_AML_M5900)	+= mach-amlm5900.o
-obj-$(CONFIG_MACH_ANUBIS)	+= mach-anubis.o
-obj-$(CONFIG_MACH_OSIRIS)	+= mach-osiris.o
-obj-$(CONFIG_ARCH_BAST)		+= mach-bast.o usb-simtec.o
+obj-$(CONFIG_ARCH_SMDK2410)	+= mach-smdk2410.o
 obj-$(CONFIG_ARCH_H1940)	+= mach-h1940.o
+obj-$(CONFIG_PM_H1940)		+= pm-h1940.o
 obj-$(CONFIG_MACH_N30)		+= mach-n30.o
-obj-$(CONFIG_ARCH_SMDK2410)	+= mach-smdk2410.o
-obj-$(CONFIG_MACH_SMDK2413)	+= mach-smdk2413.o
-obj-$(CONFIG_ARCH_S3C2440)	+= mach-smdk2440.o
-obj-$(CONFIG_MACH_VR1000)	+= mach-vr1000.o usb-simtec.o
-obj-$(CONFIG_MACH_RX3715)	+= mach-rx3715.o
+obj-$(CONFIG_ARCH_BAST)		+= mach-bast.o usb-simtec.o
 obj-$(CONFIG_MACH_OTOM)		+= mach-otom.o
-obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
-obj-$(CONFIG_MACH_VSTMS)	+= mach-vstms.o
-
-obj-$(CONFIG_MACH_SMDK)		+= common-smdk.o
\ No newline at end of file
+obj-$(CONFIG_MACH_AML_M5900)	+= mach-amlm5900.o
+obj-$(CONFIG_BAST_PC104_IRQ)	+= bast-irq.o
+obj-$(CONFIG_MACH_VR1000)	+= mach-vr1000.o usb-simtec.o
diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c
index 379efe7..daeba42 100644
--- a/arch/arm/mach-s3c2410/bast-irq.c
+++ b/arch/arm/mach-s3c2410/bast-irq.c
@@ -39,7 +39,7 @@
 #include <asm/arch/bast-map.h>
 #include <asm/arch/bast-irq.h>
 
-#include "irq.h"
+#include <asm/plat-s3c24xx/irq.h>
 
 #if 0
 #include <asm/debug-ll.h>
diff --git a/arch/arm/mach-s3c2410/bast.h b/arch/arm/mach-s3c2410/bast.h
index e5d0331..e985437 100644
--- a/arch/arm/mach-s3c2410/bast.h
+++ b/arch/arm/mach-s3c2410/bast.h
@@ -1,2 +1,2 @@
-
+/* linux/arch/arm/mach-s3c2410/bast.h
 extern void bast_init_irq(void);
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
index e13fb67..5b4831c 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/mach-s3c2410/clock.c
@@ -1,15 +1,9 @@
 /* linux/arch/arm/mach-s3c2410/clock.c
  *
- * Copyright (c) 2004-2005 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C24XX Core clock control support
- *
- * Based on, and code from linux/arch/arm/mach-versatile/clock.c
- **
- **  Copyright (C) 2004 ARM Limited.
- **  Written by Deep Blue Solutions Limited.
- *
+ * S3C2410,S3C2440,S3C2442 Clock control support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -32,418 +26,251 @@
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
-#include <linux/platform_device.h>
 #include <linux/sysdev.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
 #include <linux/clk.h>
 #include <linux/mutex.h>
 #include <linux/delay.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/map.h>
 
 #include <asm/hardware.h>
-#include <asm/irq.h>
 #include <asm/io.h>
 
+#include <asm/arch/regs-serial.h>
 #include <asm/arch/regs-clock.h>
 #include <asm/arch/regs-gpio.h>
 
-#include "clock.h"
-#include "cpu.h"
-
-/* clock information */
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
 
-static LIST_HEAD(clocks);
-
-DEFINE_MUTEX(clocks_mutex);
-
-/* enable and disable calls for use with the clk struct */
-
-static int clk_null_enable(struct clk *clk, int enable)
+int s3c2410_clkcon_enable(struct clk *clk, int enable)
 {
-	return 0;
-}
-
-/* Clock API calls */
+	unsigned int clocks = clk->ctrlbit;
+	unsigned long clkcon;
 
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	struct clk *p;
-	struct clk *clk = ERR_PTR(-ENOENT);
-	int idno;
+	clkcon = __raw_readl(S3C2410_CLKCON);
 
-	if (dev == NULL || dev->bus != &platform_bus_type)
-		idno = -1;
+	if (enable)
+		clkcon |= clocks;
 	else
-		idno = to_platform_device(dev)->id;
-
-	mutex_lock(&clocks_mutex);
-
-	list_for_each_entry(p, &clocks, list) {
-		if (p->id == idno &&
-		    strcmp(id, p->name) == 0 &&
-		    try_module_get(p->owner)) {
-			clk = p;
-			break;
-		}
-	}
-
-	/* check for the case where a device was supplied, but the
-	 * clock that was being searched for is not device specific */
-
-	if (IS_ERR(clk)) {
-		list_for_each_entry(p, &clocks, list) {
-			if (p->id == -1 && strcmp(id, p->name) == 0 &&
-			    try_module_get(p->owner)) {
-				clk = p;
-				break;
-			}
-		}
-	}
+		clkcon &= ~clocks;
 
-	mutex_unlock(&clocks_mutex);
-	return clk;
-}
+	/* ensure none of the special function bits set */
+	clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);
 
-void clk_put(struct clk *clk)
-{
-	module_put(clk->owner);
-}
+	__raw_writel(clkcon, S3C2410_CLKCON);
 
-int clk_enable(struct clk *clk)
-{
-	if (IS_ERR(clk) || clk == NULL)
-		return -EINVAL;
-
-	clk_enable(clk->parent);
-
-	mutex_lock(&clocks_mutex);
-
-	if ((clk->usage++) == 0)
-		(clk->enable)(clk, 1);
-
-	mutex_unlock(&clocks_mutex);
 	return 0;
 }
 
-void clk_disable(struct clk *clk)
-{
-	if (IS_ERR(clk) || clk == NULL)
-		return;
-
-	mutex_lock(&clocks_mutex);
-
-	if ((--clk->usage) == 0)
-		(clk->enable)(clk, 0);
-
-	mutex_unlock(&clocks_mutex);
-	clk_disable(clk->parent);
-}
-
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (IS_ERR(clk))
-		return 0;
-
-	if (clk->rate != 0)
-		return clk->rate;
-
-	if (clk->get_rate != NULL)
-		return (clk->get_rate)(clk);
-
-	if (clk->parent != NULL)
-		return clk_get_rate(clk->parent);
-
-	return clk->rate;
-}
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (!IS_ERR(clk) && clk->round_rate)
-		return (clk->round_rate)(clk, rate);
-
-	return rate;
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret;
-
-	if (IS_ERR(clk))
-		return -EINVAL;
-
-	mutex_lock(&clocks_mutex);
-	ret = (clk->set_rate)(clk, rate);
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-
-struct clk *clk_get_parent(struct clk *clk)
+static int s3c2410_upll_enable(struct clk *clk, int enable)
 {
-	return clk->parent;
-}
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	int ret = 0;
-
-	if (IS_ERR(clk))
-		return -EINVAL;
-
-	mutex_lock(&clocks_mutex);
-
-	if (clk->set_parent)
-		ret = (clk->set_parent)(clk, parent);
-
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-
-EXPORT_SYMBOL(clk_get);
-EXPORT_SYMBOL(clk_put);
-EXPORT_SYMBOL(clk_enable);
-EXPORT_SYMBOL(clk_disable);
-EXPORT_SYMBOL(clk_get_rate);
-EXPORT_SYMBOL(clk_round_rate);
-EXPORT_SYMBOL(clk_set_rate);
-EXPORT_SYMBOL(clk_get_parent);
-EXPORT_SYMBOL(clk_set_parent);
-
-/* base clocks */
-
-struct clk clk_xtal = {
-	.name		= "xtal",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-};
-
-struct clk clk_mpll = {
-	.name		= "mpll",
-	.id		= -1,
-};
-
-struct clk clk_upll = {
-	.name		= "upll",
-	.id		= -1,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-};
-
-struct clk clk_f = {
-	.name		= "fclk",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= &clk_mpll,
-	.ctrlbit	= 0,
-};
-
-struct clk clk_h = {
-	.name		= "hclk",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-};
-
-struct clk clk_p = {
-	.name		= "pclk",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-};
-
-struct clk clk_usb_bus = {
-	.name		= "usb-bus",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= &clk_upll,
-};
-
-/* clocks that could be registered by external code */
-
-static int s3c24xx_dclk_enable(struct clk *clk, int enable)
-{
-	unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON);
+	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
+	unsigned long orig = clkslow;
 
 	if (enable)
-		dclkcon |= clk->ctrlbit;
+		clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF;
 	else
-		dclkcon &= ~clk->ctrlbit;
+		clkslow |= S3C2410_CLKSLOW_UCLK_OFF;
 
-	__raw_writel(dclkcon, S3C24XX_DCLKCON);
+	__raw_writel(clkslow, S3C2410_CLKSLOW);
 
-	return 0;
-}
+	/* if we started the UPLL, then allow to settle */
 
-static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
-{
-	unsigned long dclkcon;
-	unsigned int uclk;
-
-	if (parent == &clk_upll)
-		uclk = 1;
-	else if (parent == &clk_p)
-		uclk = 0;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	dclkcon = __raw_readl(S3C24XX_DCLKCON);
-
-	if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
-		if (uclk)
-			dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
-		else
-			dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
-	} else {
-		if (uclk)
-			dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
-		else
-			dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
-	}
-
-	__raw_writel(dclkcon, S3C24XX_DCLKCON);
+	if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF))
+		udelay(200);
 
 	return 0;
 }
 
-
-static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
-{
-	unsigned long mask;
-	unsigned long source;
-
-	/* calculate the MISCCR setting for the clock */
-
-	if (parent == &clk_xtal)
-		source = S3C2410_MISCCR_CLK0_MPLL;
-	else if (parent == &clk_upll)
-		source = S3C2410_MISCCR_CLK0_UPLL;
-	else if (parent == &clk_f)
-		source = S3C2410_MISCCR_CLK0_FCLK;
-	else if (parent == &clk_h)
-		source = S3C2410_MISCCR_CLK0_HCLK;
-	else if (parent == &clk_p)
-		source = S3C2410_MISCCR_CLK0_PCLK;
-	else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
-		source = S3C2410_MISCCR_CLK0_DCLK0;
-	else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
-		source = S3C2410_MISCCR_CLK0_DCLK0;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	if (clk == &s3c24xx_dclk0)
-		mask = S3C2410_MISCCR_CLK0_MASK;
-	else {
-		source <<= 4;
-		mask = S3C2410_MISCCR_CLK1_MASK;
+/* standard clock definitions */
+
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "nand",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_NAND,
+	}, {
+		.name		= "sdi",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_SDI,
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_ADC,
+	}, {
+		.name		= "i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_IIC,
+	}, {
+		.name		= "iis",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_IIS,
+	}, {
+		.name		= "spi",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_SPI,
 	}
-
-	s3c2410_modify_misccr(mask, source);
-	return 0;
-}
-
-/* external clock definitions */
-
-struct clk s3c24xx_dclk0 = {
-	.name		= "dclk0",
-	.id		= -1,
-	.ctrlbit	= S3C2410_DCLKCON_DCLK0EN,
-	.enable	        = s3c24xx_dclk_enable,
-	.set_parent	= s3c24xx_dclk_setparent,
-};
-
-struct clk s3c24xx_dclk1 = {
-	.name		= "dclk1",
-	.id		= -1,
-	.ctrlbit	= S3C2410_DCLKCON_DCLK0EN,
-	.enable		= s3c24xx_dclk_enable,
-	.set_parent	= s3c24xx_dclk_setparent,
 };
 
-struct clk s3c24xx_clkout0 = {
-	.name		= "clkout0",
-	.id		= -1,
-	.set_parent	= s3c24xx_clkout_setparent,
+static struct clk init_clocks[] = {
+	{
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_LCDC,
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_GPIO,
+	}, {
+		.name		= "usb-host",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_USBH,
+	}, {
+		.name		= "usb-device",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_USBD,
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_PWMT,
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_UART0,
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_UART1,
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_UART2,
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_RTC,
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_p,
+		.ctrlbit	= 0,
+	}, {
+		.name		= "usb-bus-host",
+		.id		= -1,
+		.parent		= &clk_usb_bus,
+	}, {
+		.name		= "usb-bus-gadget",
+		.id		= -1,
+		.parent		= &clk_usb_bus,
+	},
 };
 
-struct clk s3c24xx_clkout1 = {
-	.name		= "clkout1",
-	.id		= -1,
-	.set_parent	= s3c24xx_clkout_setparent,
-};
-
-struct clk s3c24xx_uclk = {
-	.name		= "uclk",
-	.id		= -1,
-};
-
-/* initialise the clock system */
-
-int s3c24xx_register_clock(struct clk *clk)
-{
-	clk->owner = THIS_MODULE;
-
-	if (clk->enable == NULL)
-		clk->enable = clk_null_enable;
-
-	/* add to the list of available clocks */
-
-	mutex_lock(&clocks_mutex);
-	list_add(&clk->list, &clocks);
-	mutex_unlock(&clocks_mutex);
-
-	return 0;
-}
-
-/* initalise all the clocks */
+/* s3c2410_baseclk_add()
+ *
+ * Add all the clocks used by the s3c2410 or compatible CPUs
+ * such as the S3C2440 and S3C2442.
+ *
+ * We cannot use a system device as we are needed before any
+ * of the init-calls that initialise the devices are actually
+ * done.
+*/
 
-int __init s3c24xx_setup_clocks(unsigned long xtal,
-				unsigned long fclk,
-				unsigned long hclk,
-				unsigned long pclk)
+int __init s3c2410_baseclk_add(void)
 {
-	printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n");
+	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
+	unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
+	struct clk *clkp;
+	struct clk *xtal;
+	int ret;
+	int ptr;
 
-	/* initialise the main system clocks */
+	clk_upll.enable = s3c2410_upll_enable;
 
-	clk_xtal.rate = xtal;
-	clk_upll.rate = s3c2410_get_pll(__raw_readl(S3C2410_UPLLCON), xtal);
+	if (s3c24xx_register_clock(&clk_usb_bus) < 0)
+		printk(KERN_ERR "failed to register usb bus clock\n");
 
-	clk_mpll.rate = fclk;
-	clk_h.rate = hclk;
-	clk_p.rate = pclk;
-	clk_f.rate = fclk;
+	/* register clocks from clock array */
 
-	/* assume uart clocks are correctly setup */
+	clkp = init_clocks;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+		/* ensure that we note the clock state */
 
-	/* register our clocks */
+		clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
 
-	if (s3c24xx_register_clock(&clk_xtal) < 0)
-		printk(KERN_ERR "failed to register master xtal\n");
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+	}
 
-	if (s3c24xx_register_clock(&clk_mpll) < 0)
-		printk(KERN_ERR "failed to register mpll clock\n");
+	/* We must be careful disabling the clocks we are not intending to
+	 * be using at boot time, as subsytems such as the LCD which do
+	 * their own DMA requests to the bus can cause the system to lockup
+	 * if they where in the middle of requesting bus access.
+	 *
+	 * Disabling the LCD clock if the LCD is active is very dangerous,
+	 * and therefore the bootloader should be careful to not enable
+	 * the LCD clock if it is not needed.
+	*/
+
+	/* install (and disable) the clocks we do not need immediately */
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
 
-	if (s3c24xx_register_clock(&clk_upll) < 0)
-		printk(KERN_ERR "failed to register upll clock\n");
+		s3c2410_clkcon_enable(clkp, 0);
+	}
 
-	if (s3c24xx_register_clock(&clk_f) < 0)
-		printk(KERN_ERR "failed to register cpu fclk\n");
+	/* show the clock-slow value */
 
-	if (s3c24xx_register_clock(&clk_h) < 0)
-		printk(KERN_ERR "failed to register cpu hclk\n");
+	xtal = clk_get(NULL, "xtal");
 
-	if (s3c24xx_register_clock(&clk_p) < 0)
-		printk(KERN_ERR "failed to register cpu pclk\n");
+	printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n",
+	       print_mhz(clk_get_rate(xtal) /
+			 ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))),
+	       (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast",
+	       (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
+	       (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
 
 	return 0;
 }
diff --git a/arch/arm/mach-s3c2410/clock.h b/arch/arm/mach-s3c2410/clock.h
deleted file mode 100644
index 7f0ea03..0000000
--- a/arch/arm/mach-s3c2410/clock.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * linux/arch/arm/mach-s3c2410/clock.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/SWLINUX/
- *	Written by Ben Dooks, <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct clk {
-	struct list_head      list;
-	struct module        *owner;
-	struct clk           *parent;
-	const char           *name;
-	int		      id;
-	int		      usage;
-	unsigned long         rate;
-	unsigned long         ctrlbit;
-
-	int		    (*enable)(struct clk *, int enable);
-	int		    (*set_rate)(struct clk *c, unsigned long rate);
-	unsigned long	    (*get_rate)(struct clk *c);
-	unsigned long	    (*round_rate)(struct clk *c, unsigned long rate);
-	int		    (*set_parent)(struct clk *c, struct clk *parent);
-};
-
-/* other clocks which may be registered by board support */
-
-extern struct clk s3c24xx_dclk0;
-extern struct clk s3c24xx_dclk1;
-extern struct clk s3c24xx_clkout0;
-extern struct clk s3c24xx_clkout1;
-extern struct clk s3c24xx_uclk;
-
-extern struct clk clk_usb_bus;
-
-/* core clock support */
-
-extern struct clk clk_f;
-extern struct clk clk_h;
-extern struct clk clk_p;
-extern struct clk clk_mpll;
-extern struct clk clk_upll;
-extern struct clk clk_xtal;
-
-/* exports for arch/arm/mach-s3c2410
- *
- * Please DO NOT use these outside of arch/arm/mach-s3c2410
-*/
-
-extern struct mutex clocks_mutex;
-
-extern int s3c2410_clkcon_enable(struct clk *clk, int enable);
-
-extern int s3c24xx_register_clock(struct clk *clk);
-
-extern int s3c24xx_setup_clocks(unsigned long xtal,
-				unsigned long fclk,
-				unsigned long hclk,
-				unsigned long pclk);
diff --git a/arch/arm/mach-s3c2410/common-smdk.c b/arch/arm/mach-s3c2410/common-smdk.c
deleted file mode 100644
index a40eaa6..0000000
--- a/arch/arm/mach-s3c2410/common-smdk.c
+++ /dev/null
@@ -1,200 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/common-smdk.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Common code for SMDK2410 and SMDK2440 boards
- *
- * http://www.fluff.org/ben/smdk2440/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/leds-gpio.h>
-
-#include <asm/arch/nand.h>
-
-#include "common-smdk.h"
-#include "devs.h"
-#include "pm.h"
-
-/* LED devices */
-
-static struct s3c24xx_led_platdata smdk_pdata_led4 = {
-	.gpio		= S3C2410_GPF4,
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
-	.name		= "led4",
-	.def_trigger	= "timer",
-};
-
-static struct s3c24xx_led_platdata smdk_pdata_led5 = {
-	.gpio		= S3C2410_GPF5,
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
-	.name		= "led5",
-	.def_trigger	= "nand-disk",
-};
-
-static struct s3c24xx_led_platdata smdk_pdata_led6 = {
-	.gpio		= S3C2410_GPF6,
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
-	.name		= "led6",
-};
-
-static struct s3c24xx_led_platdata smdk_pdata_led7 = {
-	.gpio		= S3C2410_GPF7,
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
-	.name		= "led7",
-};
-
-static struct platform_device smdk_led4 = {
-	.name		= "s3c24xx_led",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &smdk_pdata_led4,
-	},
-};
-
-static struct platform_device smdk_led5 = {
-	.name		= "s3c24xx_led",
-	.id		= 1,
-	.dev		= {
-		.platform_data = &smdk_pdata_led5,
-	},
-};
-
-static struct platform_device smdk_led6 = {
-	.name		= "s3c24xx_led",
-	.id		= 2,
-	.dev		= {
-		.platform_data = &smdk_pdata_led6,
-	},
-};
-
-static struct platform_device smdk_led7 = {
-	.name		= "s3c24xx_led",
-	.id		= 3,
-	.dev		= {
-		.platform_data = &smdk_pdata_led7,
-	},
-};
-
-/* NAND parititon from 2.4.18-swl5 */
-
-static struct mtd_partition smdk_default_nand_part[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= SZ_16K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "S3C2410 flash partition 1",
-		.offset = 0,
-		.size	= SZ_2M,
-	},
-	[2] = {
-		.name	= "S3C2410 flash partition 2",
-		.offset = SZ_4M,
-		.size	= SZ_4M,
-	},
-	[3] = {
-		.name	= "S3C2410 flash partition 3",
-		.offset	= SZ_8M,
-		.size	= SZ_2M,
-	},
-	[4] = {
-		.name	= "S3C2410 flash partition 4",
-		.offset = SZ_1M * 10,
-		.size	= SZ_4M,
-	},
-	[5] = {
-		.name	= "S3C2410 flash partition 5",
-		.offset	= SZ_1M * 14,
-		.size	= SZ_1M * 10,
-	},
-	[6] = {
-		.name	= "S3C2410 flash partition 6",
-		.offset	= SZ_1M * 24,
-		.size	= SZ_1M * 24,
-	},
-	[7] = {
-		.name	= "S3C2410 flash partition 7",
-		.offset = SZ_1M * 48,
-		.size	= SZ_16M,
-	}
-};
-
-static struct s3c2410_nand_set smdk_nand_sets[] = {
-	[0] = {
-		.name		= "NAND",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(smdk_default_nand_part),
-		.partitions	= smdk_default_nand_part,
-	},
-};
-
-/* choose a set of timings which should suit most 512Mbit
- * chips and beyond.
-*/
-
-static struct s3c2410_platform_nand smdk_nand_info = {
-	.tacls		= 20,
-	.twrph0		= 60,
-	.twrph1		= 20,
-	.nr_sets	= ARRAY_SIZE(smdk_nand_sets),
-	.sets		= smdk_nand_sets,
-};
-
-/* devices we initialise */
-
-static struct platform_device __initdata *smdk_devs[] = {
-	&s3c_device_nand,
-	&smdk_led4,
-	&smdk_led5,
-	&smdk_led6,
-	&smdk_led7,
-};
-
-void __init smdk_machine_init(void)
-{
-	/* Configure the LEDs (even if we have no LED support)*/
-
-	s3c2410_gpio_cfgpin(S3C2410_GPF4, S3C2410_GPF4_OUTP);
-	s3c2410_gpio_cfgpin(S3C2410_GPF5, S3C2410_GPF5_OUTP);
-	s3c2410_gpio_cfgpin(S3C2410_GPF6, S3C2410_GPF6_OUTP);
-	s3c2410_gpio_cfgpin(S3C2410_GPF7, S3C2410_GPF7_OUTP);
-
-	s3c2410_gpio_setpin(S3C2410_GPF4, 1);
-	s3c2410_gpio_setpin(S3C2410_GPF5, 1);
-	s3c2410_gpio_setpin(S3C2410_GPF6, 1);
-	s3c2410_gpio_setpin(S3C2410_GPF7, 1);
-
-	s3c_device_nand.dev.platform_data = &smdk_nand_info;
-
-	platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));
-
-	s3c2410_pm_init();
-}
diff --git a/arch/arm/mach-s3c2410/common-smdk.h b/arch/arm/mach-s3c2410/common-smdk.h
deleted file mode 100644
index 0e3a3be..0000000
--- a/arch/arm/mach-s3c2410/common-smdk.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/common-smdk.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Common code for SMDK2410 and SMDK2440 boards
- *
- * http://www.fluff.org/ben/smdk2440/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern void smdk_machine_init(void);
diff --git a/arch/arm/mach-s3c2410/cpu.c b/arch/arm/mach-s3c2410/cpu.c
deleted file mode 100644
index ae1f5bb..0000000
--- a/arch/arm/mach-s3c2410/cpu.c
+++ /dev/null
@@ -1,357 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/cpu.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/SWLINUX/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX CPU Support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/delay.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-serial.h>
-
-#include "cpu.h"
-#include "devs.h"
-#include "clock.h"
-#include "s3c2400.h"
-#include "s3c2410.h"
-#include "s3c2412.h"
-#include "s3c244x.h"
-#include "s3c2440.h"
-#include "s3c2442.h"
-
-struct cpu_table {
-	unsigned long	idcode;
-	unsigned long	idmask;
-	void		(*map_io)(struct map_desc *mach_desc, int size);
-	void		(*init_uarts)(struct s3c2410_uartcfg *cfg, int no);
-	void		(*init_clocks)(int xtal);
-	int		(*init)(void);
-	const char	*name;
-};
-
-/* table of supported CPUs */
-
-static const char name_s3c2400[]  = "S3C2400";
-static const char name_s3c2410[]  = "S3C2410";
-static const char name_s3c2412[]  = "S3C2412";
-static const char name_s3c2440[]  = "S3C2440";
-static const char name_s3c2442[]  = "S3C2442";
-static const char name_s3c2410a[] = "S3C2410A";
-static const char name_s3c2440a[] = "S3C2440A";
-
-static struct cpu_table cpu_ids[] __initdata = {
-	{
-		.idcode		= 0x32410000,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2410_map_io,
-		.init_clocks	= s3c2410_init_clocks,
-		.init_uarts	= s3c2410_init_uarts,
-		.init		= s3c2410_init,
-		.name		= name_s3c2410
-	},
-	{
-		.idcode		= 0x32410002,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2410_map_io,
-		.init_clocks	= s3c2410_init_clocks,
-		.init_uarts	= s3c2410_init_uarts,
-		.init		= s3c2410_init,
-		.name		= name_s3c2410a
-	},
-	{
-		.idcode		= 0x32440000,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c244x_map_io,
-		.init_clocks	= s3c244x_init_clocks,
-		.init_uarts	= s3c244x_init_uarts,
-		.init		= s3c2440_init,
-		.name		= name_s3c2440
-	},
-	{
-		.idcode		= 0x32440001,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c244x_map_io,
-		.init_clocks	= s3c244x_init_clocks,
-		.init_uarts	= s3c244x_init_uarts,
-		.init		= s3c2440_init,
-		.name		= name_s3c2440a
-	},
-	{
-		.idcode		= 0x32440aaa,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c244x_map_io,
-		.init_clocks	= s3c244x_init_clocks,
-		.init_uarts	= s3c244x_init_uarts,
-		.init		= s3c2442_init,
-		.name		= name_s3c2442
-	},
-	{
-		.idcode		= 0x32412001,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2412_map_io,
-		.init_clocks	= s3c2412_init_clocks,
-		.init_uarts	= s3c2412_init_uarts,
-		.init		= s3c2412_init,
-		.name		= name_s3c2412,
-	},
-	{			/* a newer version of the s3c2412 */
-		.idcode		= 0x32412003,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2412_map_io,
-		.init_clocks	= s3c2412_init_clocks,
-		.init_uarts	= s3c2412_init_uarts,
-		.init		= s3c2412_init,
-		.name		= name_s3c2412,
-	},
-	{
-		.idcode		= 0x0,   /* S3C2400 doesn't have an idcode */
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2400_map_io,
-		.init_clocks	= s3c2400_init_clocks,
-		.init_uarts	= s3c2400_init_uarts,
-		.init		= s3c2400_init,
-		.name		= name_s3c2400
-	},
-};
-
-/* minimal IO mapping */
-
-static struct map_desc s3c_iodesc[] __initdata = {
-	IODESC_ENT(GPIO),
-	IODESC_ENT(IRQ),
-	IODESC_ENT(MEMCTRL),
-	IODESC_ENT(UART)
-};
-
-
-static struct cpu_table *
-s3c_lookup_cpu(unsigned long idcode)
-{
-	struct cpu_table *tab;
-	int count;
-
-	tab = cpu_ids;
-	for (count = 0; count < ARRAY_SIZE(cpu_ids); count++, tab++) {
-		if ((idcode & tab->idmask) == tab->idcode)
-			return tab;
-	}
-
-	return NULL;
-}
-
-/* board information */
-
-static struct s3c24xx_board *board;
-
-void s3c24xx_set_board(struct s3c24xx_board *b)
-{
-	int i;
-
-	board = b;
-
-	if (b->clocks_count != 0) {
-		struct clk **ptr = b->clocks;
-
-		for (i = b->clocks_count; i > 0; i--, ptr++)
-			s3c24xx_register_clock(*ptr);
-	}
-}
-
-/* cpu information */
-
-static struct cpu_table *cpu;
-
-static unsigned long s3c24xx_read_idcode_v5(void)
-{
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
-	return __raw_readl(S3C2412_GSTATUS1);
-#else
-	return 1UL;	/* don't look like an 2400 */
-#endif
-}
-
-static unsigned long s3c24xx_read_idcode_v4(void)
-{
-#ifndef CONFIG_CPU_S3C2400
-	return __raw_readl(S3C2410_GSTATUS1);
-#else
-	return 0UL;
-#endif
-}
-
-void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
-{
-	unsigned long idcode = 0x0;
-
-	/* initialise the io descriptors we need for initialisation */
-	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
-
-	if (cpu_architecture() >= CPU_ARCH_ARMv5) {
-		idcode = s3c24xx_read_idcode_v5();
-	} else {
-		idcode = s3c24xx_read_idcode_v4();
-	}
-
-	cpu = s3c_lookup_cpu(idcode);
-
-	if (cpu == NULL) {
-		printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode);
-		panic("Unknown S3C24XX CPU");
-	}
-
-	printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
-
-	if (cpu->map_io == NULL || cpu->init == NULL) {
-		printk(KERN_ERR "CPU %s support not enabled\n", cpu->name);
-		panic("Unsupported S3C24XX CPU");
-	}
-
-	(cpu->map_io)(mach_desc, size);
-}
-
-/* s3c24xx_init_clocks
- *
- * Initialise the clock subsystem and associated information from the
- * given master crystal value.
- *
- * xtal  = 0 -> use default PLL crystal value (normally 12MHz)
- *      != 0 -> PLL crystal value in Hz
-*/
-
-void __init s3c24xx_init_clocks(int xtal)
-{
-	if (xtal == 0)
-		xtal = 12*1000*1000;
-
-	if (cpu == NULL)
-		panic("s3c24xx_init_clocks: no cpu setup?\n");
-
-	if (cpu->init_clocks == NULL)
-		panic("s3c24xx_init_clocks: cpu has no clock init\n");
-	else
-		(cpu->init_clocks)(xtal);
-}
-
-/* uart management */
-
-static int nr_uarts __initdata = 0;
-
-static struct s3c2410_uartcfg uart_cfgs[3];
-
-/* s3c24xx_init_uartdevs
- *
- * copy the specified platform data and configuration into our central
- * set of devices, before the data is thrown away after the init process.
- *
- * This also fills in the array passed to the serial driver for the
- * early initialisation of the console.
-*/
-
-void __init s3c24xx_init_uartdevs(char *name,
-				  struct s3c24xx_uart_resources *res,
-				  struct s3c2410_uartcfg *cfg, int no)
-{
-	struct platform_device *platdev;
-	struct s3c2410_uartcfg *cfgptr = uart_cfgs;
-	struct s3c24xx_uart_resources *resp;
-	int uart;
-
-	memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no);
-
-	for (uart = 0; uart < no; uart++, cfg++, cfgptr++) {
-		platdev = s3c24xx_uart_src[cfgptr->hwport];
-
-		resp = res + cfgptr->hwport;
-
-		s3c24xx_uart_devs[uart] = platdev;
-
-		platdev->name = name;
-		platdev->resource = resp->resources;
-		platdev->num_resources = resp->nr_resources;
-
-		platdev->dev.platform_data = cfgptr;
-	}
-
-	nr_uarts = no;
-}
-
-void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	if (cpu == NULL)
-		return;
-
-	if (cpu->init_uarts == NULL) {
-		printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n");
-	} else
-		(cpu->init_uarts)(cfg, no);
-}
-
-static int __init s3c_arch_init(void)
-{
-	int ret;
-
-	// do the correct init for cpu
-
-	if (cpu == NULL)
-		panic("s3c_arch_init: NULL cpu\n");
-
-	ret = (cpu->init)();
-	if (ret != 0)
-		return ret;
-
-	ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts);
-	if (ret != 0)
-		return ret;
-
-	if (board != NULL) {
-		struct platform_device **ptr = board->devices;
-		int i;
-
-		for (i = 0; i < board->devices_count; i++, ptr++) {
-			ret = platform_device_register(*ptr);
-
-			if (ret) {
-				printk(KERN_ERR "s3c24xx: failed to add board device %s (%d) @%p\n", (*ptr)->name, ret, *ptr);
-			}
-		}
-
-		/* mask any error, we may not need all these board
-		 * devices */
-		ret = 0;
-	}
-
-	return ret;
-}
-
-arch_initcall(s3c_arch_init);
diff --git a/arch/arm/mach-s3c2410/cpu.h b/arch/arm/mach-s3c2410/cpu.h
deleted file mode 100644
index be42e40..0000000
--- a/arch/arm/mach-s3c2410/cpu.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* arch/arm/mach-s3c2410/cpu.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C24XX CPU support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* todo - fix when rmk changes iodescs to use `void __iomem *` */
-
-#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
-
-#ifndef MHZ
-#define MHZ (1000*1000)
-#endif
-
-#define print_mhz(m) ((m) / MHZ), ((m / 1000) % 1000)
-
-/* forward declaration */
-struct s3c24xx_uart_resources;
-struct platform_device;
-struct s3c2410_uartcfg;
-struct map_desc;
-
-/* core initialisation functions */
-
-extern void s3c24xx_init_irq(void);
-
-extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
-
-extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c24xx_init_clocks(int xtal);
-
-extern void s3c24xx_init_uartdevs(char *name,
-				  struct s3c24xx_uart_resources *res,
-				  struct s3c2410_uartcfg *cfg, int no);
-
-/* the board structure is used at first initialsation time
- * to get info such as the devices to register for this
- * board. This is done because platfrom_add_devices() cannot
- * be called from the map_io entry.
-*/
-
-struct s3c24xx_board {
-	struct platform_device  **devices;
-	unsigned int              devices_count;
-
-	struct clk		**clocks;
-	unsigned int		  clocks_count;
-};
-
-extern void s3c24xx_set_board(struct s3c24xx_board *board);
-
-/* timer for 2410/2440 */
-
-struct sys_timer;
-extern struct sys_timer s3c24xx_timer;
-
-/* system device classes */
-
-extern struct sysdev_class s3c2410_sysclass;
-extern struct sysdev_class s3c2412_sysclass;
-extern struct sysdev_class s3c2440_sysclass;
-extern struct sysdev_class s3c2442_sysclass;
diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c
deleted file mode 100644
index faccde2..0000000
--- a/arch/arm/mach-s3c2410/devs.c
+++ /dev/null
@@ -1,585 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/devs.c
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Base S3C24XX platform device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/arch/fb.h>
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#include <asm/arch/regs-serial.h>
-
-#include "devs.h"
-#include "cpu.h"
-
-/* Serial port registrations */
-
-static struct resource s3c2410_uart0_resource[] = {
-	[0] = {
-		.start = S3C2410_PA_UART0,
-		.end   = S3C2410_PA_UART0 + 0x3fff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_S3CUART_RX0,
-		.end   = IRQ_S3CUART_ERR0,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct resource s3c2410_uart1_resource[] = {
-	[0] = {
-		.start = S3C2410_PA_UART1,
-		.end   = S3C2410_PA_UART1 + 0x3fff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_S3CUART_RX1,
-		.end   = IRQ_S3CUART_ERR1,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct resource s3c2410_uart2_resource[] = {
-	[0] = {
-		.start = S3C2410_PA_UART2,
-		.end   = S3C2410_PA_UART2 + 0x3fff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_S3CUART_RX2,
-		.end   = IRQ_S3CUART_ERR2,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
-	[0] = {
-		.resources	= s3c2410_uart0_resource,
-		.nr_resources	= ARRAY_SIZE(s3c2410_uart0_resource),
-	},
-	[1] = {
-		.resources	= s3c2410_uart1_resource,
-		.nr_resources	= ARRAY_SIZE(s3c2410_uart1_resource),
-	},
-	[2] = {
-		.resources	= s3c2410_uart2_resource,
-		.nr_resources	= ARRAY_SIZE(s3c2410_uart2_resource),
-	},
-};
-
-/* yart devices */
-
-static struct platform_device s3c24xx_uart_device0 = {
-	.id		= 0,
-};
-
-static struct platform_device s3c24xx_uart_device1 = {
-	.id		= 1,
-};
-
-static struct platform_device s3c24xx_uart_device2 = {
-	.id		= 2,
-};
-
-struct platform_device *s3c24xx_uart_src[3] = {
-	&s3c24xx_uart_device0,
-	&s3c24xx_uart_device1,
-	&s3c24xx_uart_device2,
-};
-
-struct platform_device *s3c24xx_uart_devs[3] = {
-};
-
-/* USB Host Controller */
-
-static struct resource s3c_usb_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_USBHOST,
-		.end   = S3C24XX_PA_USBHOST + S3C24XX_SZ_USBHOST - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_USBH,
-		.end   = IRQ_USBH,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 s3c_device_usb_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_usb = {
-	.name		  = "s3c2410-ohci",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_usb_resource),
-	.resource	  = s3c_usb_resource,
-	.dev              = {
-		.dma_mask = &s3c_device_usb_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-
-EXPORT_SYMBOL(s3c_device_usb);
-
-/* LCD Controller */
-
-static struct resource s3c_lcd_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_LCD,
-		.end   = S3C24XX_PA_LCD + S3C24XX_SZ_LCD - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_LCD,
-		.end   = IRQ_LCD,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-static u64 s3c_device_lcd_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_lcd = {
-	.name		  = "s3c2410-lcd",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_lcd_resource),
-	.resource	  = s3c_lcd_resource,
-	.dev              = {
-		.dma_mask		= &s3c_device_lcd_dmamask,
-		.coherent_dma_mask	= 0xffffffffUL
-	}
-};
-
-EXPORT_SYMBOL(s3c_device_lcd);
-
-void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
-{
-	struct s3c2410fb_mach_info *npd;
-
-	npd = kmalloc(sizeof(*npd), GFP_KERNEL);
-	if (npd) {
-		memcpy(npd, pd, sizeof(*npd));
-		s3c_device_lcd.dev.platform_data = npd;
-	} else {
-		printk(KERN_ERR "no memory for LCD platform data\n");
-	}
-}
-
-/* NAND Controller */
-
-static struct resource s3c_nand_resource[] = {
-	[0] = {
-		.start = S3C2410_PA_NAND,
-		.end   = S3C2410_PA_NAND + S3C24XX_SZ_NAND - 1,
-		.flags = IORESOURCE_MEM,
-	}
-};
-
-struct platform_device s3c_device_nand = {
-	.name		  = "s3c2410-nand",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_nand_resource),
-	.resource	  = s3c_nand_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_nand);
-
-/* USB Device (Gadget)*/
-
-static struct resource s3c_usbgadget_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_USBDEV,
-		.end   = S3C24XX_PA_USBDEV + S3C24XX_SZ_USBDEV - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_USBD,
-		.end   = IRQ_USBD,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-struct platform_device s3c_device_usbgadget = {
-	.name		  = "s3c2410-usbgadget",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_usbgadget_resource),
-	.resource	  = s3c_usbgadget_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_usbgadget);
-
-/* Watchdog */
-
-static struct resource s3c_wdt_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_WATCHDOG,
-		.end   = S3C24XX_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_WDT,
-		.end   = IRQ_WDT,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-struct platform_device s3c_device_wdt = {
-	.name		  = "s3c2410-wdt",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_wdt_resource),
-	.resource	  = s3c_wdt_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_wdt);
-
-/* I2C */
-
-static struct resource s3c_i2c_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_IIC,
-		.end   = S3C24XX_PA_IIC + S3C24XX_SZ_IIC - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_IIC,
-		.end   = IRQ_IIC,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-struct platform_device s3c_device_i2c = {
-	.name		  = "s3c2410-i2c",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_i2c_resource),
-	.resource	  = s3c_i2c_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_i2c);
-
-/* IIS */
-
-static struct resource s3c_iis_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_IIS,
-		.end   = S3C24XX_PA_IIS + S3C24XX_SZ_IIS -1,
-		.flags = IORESOURCE_MEM,
-	}
-};
-
-static u64 s3c_device_iis_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_iis = {
-	.name		  = "s3c2410-iis",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_iis_resource),
-	.resource	  = s3c_iis_resource,
-	.dev              = {
-		.dma_mask = &s3c_device_iis_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-
-EXPORT_SYMBOL(s3c_device_iis);
-
-/* RTC */
-
-static struct resource s3c_rtc_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_RTC,
-		.end   = S3C24XX_PA_RTC + 0xff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_RTC,
-		.end   = IRQ_RTC,
-		.flags = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start = IRQ_TICK,
-		.end   = IRQ_TICK,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-struct platform_device s3c_device_rtc = {
-	.name		  = "s3c2410-rtc",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_rtc_resource),
-	.resource	  = s3c_rtc_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_rtc);
-
-/* ADC */
-
-static struct resource s3c_adc_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_ADC,
-		.end   = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_TC,
-		.end   = IRQ_TC,
-		.flags = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start = IRQ_ADC,
-		.end   = IRQ_ADC,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-struct platform_device s3c_device_adc = {
-	.name		  = "s3c2410-adc",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_adc_resource),
-	.resource	  = s3c_adc_resource,
-};
-
-/* SDI */
-
-static struct resource s3c_sdi_resource[] = {
-	[0] = {
-		.start = S3C2410_PA_SDI,
-		.end   = S3C2410_PA_SDI + S3C24XX_SZ_SDI - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_SDI,
-		.end   = IRQ_SDI,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-struct platform_device s3c_device_sdi = {
-	.name		  = "s3c2410-sdi",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_sdi_resource),
-	.resource	  = s3c_sdi_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_sdi);
-
-/* SPI (0) */
-
-static struct resource s3c_spi0_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_SPI,
-		.end   = S3C24XX_PA_SPI + 0x1f,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_SPI0,
-		.end   = IRQ_SPI0,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-static u64 s3c_device_spi0_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_spi0 = {
-	.name		  = "s3c2410-spi",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s3c_spi0_resource),
-	.resource	  = s3c_spi0_resource,
-        .dev              = {
-                .dma_mask = &s3c_device_spi0_dmamask,
-                .coherent_dma_mask = 0xffffffffUL
-        }
-};
-
-EXPORT_SYMBOL(s3c_device_spi0);
-
-/* SPI (1) */
-
-static struct resource s3c_spi1_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_SPI + 0x20,
-		.end   = S3C24XX_PA_SPI + 0x20 + 0x1f,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_SPI1,
-		.end   = IRQ_SPI1,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-static u64 s3c_device_spi1_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_spi1 = {
-	.name		  = "s3c2410-spi",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s3c_spi1_resource),
-	.resource	  = s3c_spi1_resource,
-        .dev              = {
-                .dma_mask = &s3c_device_spi1_dmamask,
-                .coherent_dma_mask = 0xffffffffUL
-        }
-};
-
-EXPORT_SYMBOL(s3c_device_spi1);
-
-/* pwm timer blocks */
-
-static struct resource s3c_timer0_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_TIMER + 0x0C,
-		.end   = S3C24XX_PA_TIMER + 0x0C + 0xB,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_TIMER0,
-		.end   = IRQ_TIMER0,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-struct platform_device s3c_device_timer0 = {
-	.name		  = "s3c2410-timer",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s3c_timer0_resource),
-	.resource	  = s3c_timer0_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_timer0);
-
-/* timer 1 */
-
-static struct resource s3c_timer1_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_TIMER + 0x18,
-		.end   = S3C24XX_PA_TIMER + 0x23,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_TIMER1,
-		.end   = IRQ_TIMER1,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-struct platform_device s3c_device_timer1 = {
-	.name		  = "s3c2410-timer",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s3c_timer1_resource),
-	.resource	  = s3c_timer1_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_timer1);
-
-/* timer 2 */
-
-static struct resource s3c_timer2_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_TIMER + 0x24,
-		.end   = S3C24XX_PA_TIMER + 0x2F,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_TIMER2,
-		.end   = IRQ_TIMER2,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-struct platform_device s3c_device_timer2 = {
-	.name		  = "s3c2410-timer",
-	.id		  = 2,
-	.num_resources	  = ARRAY_SIZE(s3c_timer2_resource),
-	.resource	  = s3c_timer2_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_timer2);
-
-/* timer 3 */
-
-static struct resource s3c_timer3_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_TIMER + 0x30,
-		.end   = S3C24XX_PA_TIMER + 0x3B,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_TIMER3,
-		.end   = IRQ_TIMER3,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-struct platform_device s3c_device_timer3 = {
-	.name		  = "s3c2410-timer",
-	.id		  = 3,
-	.num_resources	  = ARRAY_SIZE(s3c_timer3_resource),
-	.resource	  = s3c_timer3_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_timer3);
-
-#ifdef CONFIG_CPU_S3C2440
-
-/* Camif Controller */
-
-static struct resource s3c_camif_resource[] = {
-	[0] = {
-		.start = S3C2440_PA_CAMIF,
-		.end   = S3C2440_PA_CAMIF + S3C2440_SZ_CAMIF - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_CAM,
-		.end   = IRQ_CAM,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-static u64 s3c_device_camif_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_camif = {
-	.name		  = "s3c2440-camif",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_camif_resource),
-	.resource	  = s3c_camif_resource,
-	.dev              = {
-		.dma_mask = &s3c_device_camif_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-
-EXPORT_SYMBOL(s3c_device_camif);
-
-#endif // CONFIG_CPU_S32440
diff --git a/arch/arm/mach-s3c2410/devs.h b/arch/arm/mach-s3c2410/devs.h
deleted file mode 100644
index 14fb0ba..0000000
--- a/arch/arm/mach-s3c2410/devs.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* arch/arm/mach-s3c2410/devs.h
- *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2410 standard platform devices
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-#include <linux/platform_device.h>
-
-struct s3c24xx_uart_resources {
-	struct resource		*resources;
-	unsigned long		 nr_resources;
-};
-
-extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
-
-extern struct platform_device *s3c24xx_uart_devs[];
-extern struct platform_device *s3c24xx_uart_src[];
-
-extern struct platform_device s3c_device_usb;
-extern struct platform_device s3c_device_lcd;
-extern struct platform_device s3c_device_wdt;
-extern struct platform_device s3c_device_i2c;
-extern struct platform_device s3c_device_iis;
-extern struct platform_device s3c_device_rtc;
-extern struct platform_device s3c_device_adc;
-extern struct platform_device s3c_device_sdi;
-
-extern struct platform_device s3c_device_spi0;
-extern struct platform_device s3c_device_spi1;
-
-extern struct platform_device s3c_device_nand;
-
-extern struct platform_device s3c_device_timer0;
-extern struct platform_device s3c_device_timer1;
-extern struct platform_device s3c_device_timer2;
-extern struct platform_device s3c_device_timer3;
-
-extern struct platform_device s3c_device_usbgadget;
-
-/* s3c2440 specific devices */
-
-#ifdef CONFIG_CPU_S3C2440
-
-extern struct platform_device s3c_device_camif;
-
-#endif
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index fa860e7..22c6136 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -1,9 +1,9 @@
 /* linux/arch/arm/mach-s3c2410/dma.c
  *
- * Copyright (c) 2003-2005,2006 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C2410 DMA core
+ * S3C2410 DMA selection
  *
  * http://armlinux.simtec.co.uk/
  *
@@ -12,1430 +12,150 @@
  * published by the Free Software Foundation.
 */
 
-
-#ifdef CONFIG_S3C2410_DMA_DEBUG
-#define DEBUG
-#endif
-
-#include <linux/module.h>
+#include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
 #include <linux/sysdev.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
+#include <linux/serial_core.h>
 
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/io.h>
 #include <asm/dma.h>
-
-#include <asm/mach/dma.h>
-#include <asm/arch/map.h>
-
-#include "dma.h"
-
-/* io map for dma */
-static void __iomem *dma_base;
-static struct kmem_cache *dma_kmem;
-
-struct s3c24xx_dma_selection dma_sel;
-
-/* dma channel state information */
-struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
-
-/* debugging functions */
-
-#define BUF_MAGIC (0xcafebabe)
-
-#define dmawarn(fmt...) printk(KERN_DEBUG fmt)
-
-#define dma_regaddr(chan, reg) ((chan)->regs + (reg))
-
-#if 1
-#define dma_wrreg(chan, reg, val) writel((val), (chan)->regs + (reg))
-#else
-static inline void
-dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val)
-{
-	pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg);
-	writel(val, dma_regaddr(chan, reg));
-}
-#endif
-
-#define dma_rdreg(chan, reg) readl((chan)->regs + (reg))
-
-/* captured register state for debug */
-
-struct s3c2410_dma_regstate {
-	unsigned long         dcsrc;
-	unsigned long         disrc;
-	unsigned long         dstat;
-	unsigned long         dcon;
-	unsigned long         dmsktrig;
+#include <asm/arch/dma.h>
+#include <asm/plat-s3c24xx/dma.h>
+
+#include <asm/plat-s3c24xx/cpu.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-ac97.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/regs-sdi.h>
+#include <asm/arch/regs-iis.h>
+#include <asm/arch/regs-spi.h>
+
+static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = {
+	[DMACH_XD0] = {
+		.name		= "xdreq0",
+		.channels[0]	= S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID,
+	},
+	[DMACH_XD1] = {
+		.name		= "xdreq1",
+		.channels[1]	= S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID,
+	},
+	[DMACH_SDI] = {
+		.name		= "sdi",
+		.channels[0]	= S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
+		.channels[2]	= S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
+		.channels[3]	= S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_SPI0] = {
+		.name		= "spi0",
+		.channels[1]	= S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_SPI + S3C2410_SPTDAT,
+		.hw_addr.from	= S3C2410_PA_SPI + S3C2410_SPRDAT,
+	},
+	[DMACH_SPI1] = {
+		.name		= "spi1",
+		.channels[3]	= S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
+		.hw_addr.from	= S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
+	},
+	[DMACH_UART0] = {
+		.name		= "uart0",
+		.channels[0]	= S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
+	},
+	[DMACH_UART1] = {
+		.name		= "uart1",
+		.channels[1]	= S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
+	},
+      	[DMACH_UART2] = {
+		.name		= "uart2",
+		.channels[3]	= S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
+	},
+	[DMACH_TIMER] = {
+		.name		= "timer",
+		.channels[0]	= S3C2410_DCON_CH0_TIMER | DMA_CH_VALID,
+		.channels[2]	= S3C2410_DCON_CH2_TIMER | DMA_CH_VALID,
+		.channels[3]	= S3C2410_DCON_CH3_TIMER | DMA_CH_VALID,
+	},
+	[DMACH_I2S_IN] = {
+		.name		= "i2s-sdi",
+		.channels[1]	= S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
+		.channels[2]	= S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
+		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_I2S_OUT] = {
+		.name		= "i2s-sdo",
+		.channels[2]	= S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_USB_EP1] = {
+		.name		= "usb-ep1",
+		.channels[0]	= S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID,
+	},
+	[DMACH_USB_EP2] = {
+		.name		= "usb-ep2",
+		.channels[1]	= S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID,
+	},
+	[DMACH_USB_EP3] = {
+		.name		= "usb-ep3",
+		.channels[2]	= S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID,
+	},
+	[DMACH_USB_EP4] = {
+		.name		= "usb-ep4",
+		.channels[3]	=S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID,
+	},
 };
 
-#ifdef CONFIG_S3C2410_DMA_DEBUG
-
-/* dmadbg_showregs
- *
- * simple debug routine to print the current state of the dma registers
-*/
-
-static void
-dmadbg_capture(struct s3c2410_dma_chan *chan, struct s3c2410_dma_regstate *regs)
-{
-	regs->dcsrc    = dma_rdreg(chan, S3C2410_DMA_DCSRC);
-	regs->disrc    = dma_rdreg(chan, S3C2410_DMA_DISRC);
-	regs->dstat    = dma_rdreg(chan, S3C2410_DMA_DSTAT);
-	regs->dcon     = dma_rdreg(chan, S3C2410_DMA_DCON);
-	regs->dmsktrig = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
-}
-
-static void
-dmadbg_dumpregs(const char *fname, int line, struct s3c2410_dma_chan *chan,
-		 struct s3c2410_dma_regstate *regs)
-{
-	printk(KERN_DEBUG "dma%d: %s:%d: DCSRC=%08lx, DISRC=%08lx, DSTAT=%08lx DMT=%02lx, DCON=%08lx\n",
-	       chan->number, fname, line,
-	       regs->dcsrc, regs->disrc, regs->dstat, regs->dmsktrig,
-	       regs->dcon);
-}
-
-static void
-dmadbg_showchan(const char *fname, int line, struct s3c2410_dma_chan *chan)
-{
-	struct s3c2410_dma_regstate state;
-
-	dmadbg_capture(chan, &state);
-
-	printk(KERN_DEBUG "dma%d: %s:%d: ls=%d, cur=%p, %p %p\n",
-	       chan->number, fname, line, chan->load_state,
-	       chan->curr, chan->next, chan->end);
-
-	dmadbg_dumpregs(fname, line, chan, &state);
-}
-
-static void
-dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan)
-{
-	struct s3c2410_dma_regstate state;
-
-	dmadbg_capture(chan, &state);
-	dmadbg_dumpregs(fname, line, chan, &state);
-}
-
-#define dbg_showregs(chan) dmadbg_showregs(__FUNCTION__, __LINE__, (chan))
-#define dbg_showchan(chan) dmadbg_showchan(__FUNCTION__, __LINE__, (chan))
-#else
-#define dbg_showregs(chan) do { } while(0)
-#define dbg_showchan(chan) do { } while(0)
-#endif /* CONFIG_S3C2410_DMA_DEBUG */
-
-static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX];
-
-/* lookup_dma_channel
- *
- * change the dma channel number given into a real dma channel id
-*/
-
-static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel)
-{
-	if (channel & DMACH_LOW_LEVEL)
-		return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
-	else
-		return dma_chan_map[channel];
-}
-
-/* s3c2410_dma_stats_timeout
- *
- * Update DMA stats from timeout info
-*/
-
-static void
-s3c2410_dma_stats_timeout(struct s3c2410_dma_stats *stats, int val)
+static void s3c2410_dma_select(struct s3c2410_dma_chan *chan,
+			       struct s3c24xx_dma_map *map)
 {
-	if (stats == NULL)
-		return;
-
-	if (val > stats->timeout_longest)
-		stats->timeout_longest = val;
-	if (val < stats->timeout_shortest)
-		stats->timeout_shortest = val;
-
-	stats->timeout_avg += val;
+	chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID;
 }
 
-/* s3c2410_dma_waitforload
- *
- * wait for the DMA engine to load a buffer, and update the state accordingly
-*/
-
-static int
-s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line)
-{
-	int timeout = chan->load_timeout;
-	int took;
-
-	if (chan->load_state != S3C2410_DMALOAD_1LOADED) {
-		printk(KERN_ERR "dma%d: s3c2410_dma_waitforload() called in loadstate %d from line %d\n", chan->number, chan->load_state, line);
-		return 0;
-	}
-
-	if (chan->stats != NULL)
-		chan->stats->loads++;
-
-	while (--timeout > 0) {
-		if ((dma_rdreg(chan, S3C2410_DMA_DSTAT) << (32-20)) != 0) {
-			took = chan->load_timeout - timeout;
-
-			s3c2410_dma_stats_timeout(chan->stats, took);
-
-			switch (chan->load_state) {
-			case S3C2410_DMALOAD_1LOADED:
-				chan->load_state = S3C2410_DMALOAD_1RUNNING;
-				break;
-
-			default:
-				printk(KERN_ERR "dma%d: unknown load_state in s3c2410_dma_waitforload() %d\n", chan->number, chan->load_state);
-			}
-
-			return 1;
-		}
-	}
-
-	if (chan->stats != NULL) {
-		chan->stats->timeout_failed++;
-	}
-
-	return 0;
-}
-
-
-
-/* s3c2410_dma_loadbuffer
- *
- * load a buffer, and update the channel state
-*/
-
-static inline int
-s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan,
-		       struct s3c2410_dma_buf *buf)
-{
-	unsigned long reload;
-
-	pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n",
-		 buf, (unsigned long)buf->data, buf->size);
-
-	if (buf == NULL) {
-		dmawarn("buffer is NULL\n");
-		return -EINVAL;
-	}
-
-	/* check the state of the channel before we do anything */
-
-	if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
-		dmawarn("load_state is S3C2410_DMALOAD_1LOADED\n");
-	}
-
-	if (chan->load_state == S3C2410_DMALOAD_1LOADED_1RUNNING) {
-		dmawarn("state is S3C2410_DMALOAD_1LOADED_1RUNNING\n");
-	}
-
-	/* it would seem sensible if we are the last buffer to not bother
-	 * with the auto-reload bit, so that the DMA engine will not try
-	 * and load another transfer after this one has finished...
-	 */
-	if (chan->load_state == S3C2410_DMALOAD_NONE) {
-		pr_debug("load_state is none, checking for noreload (next=%p)\n",
-			 buf->next);
-		reload = (buf->next == NULL) ? S3C2410_DCON_NORELOAD : 0;
-	} else {
-		//pr_debug("load_state is %d => autoreload\n", chan->load_state);
-		reload = S3C2410_DCON_AUTORELOAD;
-	}
-
-	if ((buf->data & 0xf0000000) != 0x30000000) {
-		dmawarn("dmaload: buffer is %p\n", (void *)buf->data);
-	}
-
-	writel(buf->data, chan->addr_reg);
-
-	dma_wrreg(chan, S3C2410_DMA_DCON,
-		  chan->dcon | reload | (buf->size/chan->xfer_unit));
-
-	chan->next = buf->next;
-
-	/* update the state of the channel */
-
-	switch (chan->load_state) {
-	case S3C2410_DMALOAD_NONE:
-		chan->load_state = S3C2410_DMALOAD_1LOADED;
-		break;
-
-	case S3C2410_DMALOAD_1RUNNING:
-		chan->load_state = S3C2410_DMALOAD_1LOADED_1RUNNING;
-		break;
-
-	default:
-		dmawarn("dmaload: unknown state %d in loadbuffer\n",
-			chan->load_state);
-		break;
-	}
-
-	return 0;
-}
-
-/* s3c2410_dma_call_op
- *
- * small routine to call the op routine with the given op if it has been
- * registered
-*/
-
-static void
-s3c2410_dma_call_op(struct s3c2410_dma_chan *chan, enum s3c2410_chan_op op)
-{
-	if (chan->op_fn != NULL) {
-		(chan->op_fn)(chan, op);
-	}
-}
-
-/* s3c2410_dma_buffdone
- *
- * small wrapper to check if callback routine needs to be called, and
- * if so, call it
-*/
-
-static inline void
-s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf,
-		     enum s3c2410_dma_buffresult result)
-{
-#if 0
-	pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n",
-		 chan->callback_fn, buf, buf->id, buf->size, result);
-#endif
-
-	if (chan->callback_fn != NULL) {
-		(chan->callback_fn)(chan, buf->id, buf->size, result);
-	}
-}
-
-/* s3c2410_dma_start
- *
- * start a dma channel going
-*/
-
-static int s3c2410_dma_start(struct s3c2410_dma_chan *chan)
-{
-	unsigned long tmp;
-	unsigned long flags;
-
-	pr_debug("s3c2410_start_dma: channel=%d\n", chan->number);
-
-	local_irq_save(flags);
-
-	if (chan->state == S3C2410_DMA_RUNNING) {
-		pr_debug("s3c2410_start_dma: already running (%d)\n", chan->state);
-		local_irq_restore(flags);
-		return 0;
-	}
-
-	chan->state = S3C2410_DMA_RUNNING;
-
-	/* check wether there is anything to load, and if not, see
-	 * if we can find anything to load
-	 */
-
-	if (chan->load_state == S3C2410_DMALOAD_NONE) {
-		if (chan->next == NULL) {
-			printk(KERN_ERR "dma%d: channel has nothing loaded\n",
-			       chan->number);
-			chan->state = S3C2410_DMA_IDLE;
-			local_irq_restore(flags);
-			return -EINVAL;
-		}
-
-		s3c2410_dma_loadbuffer(chan, chan->next);
-	}
-
-	dbg_showchan(chan);
-
-	/* enable the channel */
-
-	if (!chan->irq_enabled) {
-		enable_irq(chan->irq);
-		chan->irq_enabled = 1;
-	}
-
-	/* start the channel going */
-
-	tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
-	tmp &= ~S3C2410_DMASKTRIG_STOP;
-	tmp |= S3C2410_DMASKTRIG_ON;
-	dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
-
-	pr_debug("dma%d: %08lx to DMASKTRIG\n", chan->number, tmp);
-
-#if 0
-	/* the dma buffer loads should take care of clearing the AUTO
-	 * reloading feature */
-	tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
-	tmp &= ~S3C2410_DCON_NORELOAD;
-	dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
-#endif
-
-	s3c2410_dma_call_op(chan, S3C2410_DMAOP_START);
-
-	dbg_showchan(chan);
-
-	/* if we've only loaded one buffer onto the channel, then chec
-	 * to see if we have another, and if so, try and load it so when
-	 * the first buffer is finished, the new one will be loaded onto
-	 * the channel */
-
-	if (chan->next != NULL) {
-		if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
-
-			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
-				pr_debug("%s: buff not yet loaded, no more todo\n",
-					 __FUNCTION__);
-			} else {
-				chan->load_state = S3C2410_DMALOAD_1RUNNING;
-				s3c2410_dma_loadbuffer(chan, chan->next);
-			}
-
-		} else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
-			s3c2410_dma_loadbuffer(chan, chan->next);
-		}
-	}
-
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-/* s3c2410_dma_canload
- *
- * work out if we can queue another buffer into the DMA engine
-*/
-
-static int
-s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
-{
-	if (chan->load_state == S3C2410_DMALOAD_NONE ||
-	    chan->load_state == S3C2410_DMALOAD_1RUNNING)
-		return 1;
-
-	return 0;
-}
-
-/* s3c2410_dma_enqueue
- *
- * queue an given buffer for dma transfer.
- *
- * id         the device driver's id information for this buffer
- * data       the physical address of the buffer data
- * size       the size of the buffer in bytes
- *
- * If the channel is not running, then the flag S3C2410_DMAF_AUTOSTART
- * is checked, and if set, the channel is started. If this flag isn't set,
- * then an error will be returned.
- *
- * It is possible to queue more than one DMA buffer onto a channel at
- * once, and the code will deal with the re-loading of the next buffer
- * when necessary.
-*/
-
-int s3c2410_dma_enqueue(unsigned int channel, void *id,
-			dma_addr_t data, int size)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-	struct s3c2410_dma_buf *buf;
-	unsigned long flags;
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: id=%p, data=%08x, size=%d\n",
-		 __FUNCTION__, id, (unsigned int)data, size);
-
-	buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC);
-	if (buf == NULL) {
-		pr_debug("%s: out of memory (%ld alloc)\n",
-			 __FUNCTION__, (long)sizeof(*buf));
-		return -ENOMEM;
-	}
-
-	//pr_debug("%s: new buffer %p\n", __FUNCTION__, buf);
-	//dbg_showchan(chan);
-
-	buf->next  = NULL;
-	buf->data  = buf->ptr = data;
-	buf->size  = size;
-	buf->id    = id;
-	buf->magic = BUF_MAGIC;
-
-	local_irq_save(flags);
-
-	if (chan->curr == NULL) {
-		/* we've got nothing loaded... */
-		pr_debug("%s: buffer %p queued onto empty channel\n",
-			 __FUNCTION__, buf);
-
-		chan->curr = buf;
-		chan->end  = buf;
-		chan->next = NULL;
-	} else {
-		pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n",
-			 chan->number, __FUNCTION__, buf);
-
-		if (chan->end == NULL)
-			pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n",
-				 chan->number, __FUNCTION__, chan);
-
-		chan->end->next = buf;
-		chan->end = buf;
-	}
-
-	/* if necessary, update the next buffer field */
-	if (chan->next == NULL)
-		chan->next = buf;
-
-	/* check to see if we can load a buffer */
-	if (chan->state == S3C2410_DMA_RUNNING) {
-		if (chan->load_state == S3C2410_DMALOAD_1LOADED && 1) {
-			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
-				printk(KERN_ERR "dma%d: loadbuffer:"
-				       "timeout loading buffer\n",
-				       chan->number);
-				dbg_showchan(chan);
-				local_irq_restore(flags);
-				return -EINVAL;
-			}
-		}
-
-		while (s3c2410_dma_canload(chan) && chan->next != NULL) {
-			s3c2410_dma_loadbuffer(chan, chan->next);
-		}
-	} else if (chan->state == S3C2410_DMA_IDLE) {
-		if (chan->flags & S3C2410_DMAF_AUTOSTART) {
-			s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_START);
-		}
-	}
-
-	local_irq_restore(flags);
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_enqueue);
-
-static inline void
-s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf)
-{
-	int magicok = (buf->magic == BUF_MAGIC);
-
-	buf->magic = -1;
-
-	if (magicok) {
-		kmem_cache_free(dma_kmem, buf);
-	} else {
-		printk("s3c2410_dma_freebuf: buff %p with bad magic\n", buf);
-	}
-}
-
-/* s3c2410_dma_lastxfer
- *
- * called when the system is out of buffers, to ensure that the channel
- * is prepared for shutdown.
-*/
-
-static inline void
-s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan)
-{
-#if 0
-	pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n",
-		 chan->number, chan->load_state);
-#endif
-
-	switch (chan->load_state) {
-	case S3C2410_DMALOAD_NONE:
-		break;
-
-	case S3C2410_DMALOAD_1LOADED:
-		if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
-				/* flag error? */
-			printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
-			       chan->number, __FUNCTION__);
-			return;
-		}
-		break;
-
-	case S3C2410_DMALOAD_1LOADED_1RUNNING:
-		/* I belive in this case we do not have anything to do
-		 * until the next buffer comes along, and we turn off the
-		 * reload */
-		return;
-
-	default:
-		pr_debug("dma%d: lastxfer: unhandled load_state %d with no next\n",
-			 chan->number, chan->load_state);
-		return;
-
-	}
-
-	/* hopefully this'll shut the damned thing up after the transfer... */
-	dma_wrreg(chan, S3C2410_DMA_DCON, chan->dcon | S3C2410_DCON_NORELOAD);
-}
-
-
-#define dmadbg2(x...)
-
-static irqreturn_t
-s3c2410_dma_irq(int irq, void *devpw)
-{
-	struct s3c2410_dma_chan *chan = (struct s3c2410_dma_chan *)devpw;
-	struct s3c2410_dma_buf  *buf;
-
-	buf = chan->curr;
-
-	dbg_showchan(chan);
-
-	/* modify the channel state */
-
-	switch (chan->load_state) {
-	case S3C2410_DMALOAD_1RUNNING:
-		/* TODO - if we are running only one buffer, we probably
-		 * want to reload here, and then worry about the buffer
-		 * callback */
-
-		chan->load_state = S3C2410_DMALOAD_NONE;
-		break;
-
-	case S3C2410_DMALOAD_1LOADED:
-		/* iirc, we should go back to NONE loaded here, we
-		 * had a buffer, and it was never verified as being
-		 * loaded.
-		 */
-
-		chan->load_state = S3C2410_DMALOAD_NONE;
-		break;
-
-	case S3C2410_DMALOAD_1LOADED_1RUNNING:
-		/* we'll worry about checking to see if another buffer is
-		 * ready after we've called back the owner. This should
-		 * ensure we do not wait around too long for the DMA
-		 * engine to start the next transfer
-		 */
-
-		chan->load_state = S3C2410_DMALOAD_1LOADED;
-		break;
-
-	case S3C2410_DMALOAD_NONE:
-		printk(KERN_ERR "dma%d: IRQ with no loaded buffer?\n",
-		       chan->number);
-		break;
-
-	default:
-		printk(KERN_ERR "dma%d: IRQ in invalid load_state %d\n",
-		       chan->number, chan->load_state);
-		break;
-	}
-
-	if (buf != NULL) {
-		/* update the chain to make sure that if we load any more
-		 * buffers when we call the callback function, things should
-		 * work properly */
-
-		chan->curr = buf->next;
-		buf->next  = NULL;
-
-		if (buf->magic != BUF_MAGIC) {
-			printk(KERN_ERR "dma%d: %s: buf %p incorrect magic\n",
-			       chan->number, __FUNCTION__, buf);
-			return IRQ_HANDLED;
-		}
-
-		s3c2410_dma_buffdone(chan, buf, S3C2410_RES_OK);
-
-		/* free resouces */
-		s3c2410_dma_freebuf(buf);
-	} else {
-	}
-
-	/* only reload if the channel is still running... our buffer done
-	 * routine may have altered the state by requesting the dma channel
-	 * to stop or shutdown... */
-
-	/* todo: check that when the channel is shut-down from inside this
-	 * function, we cope with unsetting reload, etc */
-
-	if (chan->next != NULL && chan->state != S3C2410_DMA_IDLE) {
-		unsigned long flags;
-
-		switch (chan->load_state) {
-		case S3C2410_DMALOAD_1RUNNING:
-			/* don't need to do anything for this state */
-			break;
-
-		case S3C2410_DMALOAD_NONE:
-			/* can load buffer immediately */
-			break;
-
-		case S3C2410_DMALOAD_1LOADED:
-			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
-				/* flag error? */
-				printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
-				       chan->number, __FUNCTION__);
-				return IRQ_HANDLED;
-			}
-
-			break;
-
-		case S3C2410_DMALOAD_1LOADED_1RUNNING:
-			goto no_load;
-
-		default:
-			printk(KERN_ERR "dma%d: unknown load_state in irq, %d\n",
-			       chan->number, chan->load_state);
-			return IRQ_HANDLED;
-		}
-
-		local_irq_save(flags);
-		s3c2410_dma_loadbuffer(chan, chan->next);
-		local_irq_restore(flags);
-	} else {
-		s3c2410_dma_lastxfer(chan);
-
-		/* see if we can stop this channel.. */
-		if (chan->load_state == S3C2410_DMALOAD_NONE) {
-			pr_debug("dma%d: end of transfer, stopping channel (%ld)\n",
-				 chan->number, jiffies);
-			s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL,
-					 S3C2410_DMAOP_STOP);
-		}
-	}
-
- no_load:
-	return IRQ_HANDLED;
-}
-
-static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel);
-
-/* s3c2410_request_dma
- *
- * get control of an dma channel
-*/
-
-int s3c2410_dma_request(unsigned int channel,
-			struct s3c2410_dma_client *client,
-			void *dev)
-{
-	struct s3c2410_dma_chan *chan;
-	unsigned long flags;
-	int err;
-
-	pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
-		 channel, client->name, dev);
-
-	local_irq_save(flags);
-
-	chan = s3c2410_dma_map_channel(channel);
-	if (chan == NULL) {
-		local_irq_restore(flags);
-		return -EBUSY;
-	}
-
-	dbg_showchan(chan);
-
-	chan->client = client;
-	chan->in_use = 1;
-
-	if (!chan->irq_claimed) {
-		pr_debug("dma%d: %s : requesting irq %d\n",
-			 channel, __FUNCTION__, chan->irq);
-
-		chan->irq_claimed = 1;
-		local_irq_restore(flags);
-
-		err = request_irq(chan->irq, s3c2410_dma_irq, IRQF_DISABLED,
-				  client->name, (void *)chan);
-
-		local_irq_save(flags);
-
-		if (err) {
-			chan->in_use = 0;
-			chan->irq_claimed = 0;
-			local_irq_restore(flags);
-
-			printk(KERN_ERR "%s: cannot get IRQ %d for DMA %d\n",
-			       client->name, chan->irq, chan->number);
-			return err;
-		}
-
-		chan->irq_enabled = 1;
-	}
-
-	local_irq_restore(flags);
-
-	/* need to setup */
-
-	pr_debug("%s: channel initialised, %p\n", __FUNCTION__, chan);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_request);
-
-/* s3c2410_dma_free
- *
- * release the given channel back to the system, will stop and flush
- * any outstanding transfers, and ensure the channel is ready for the
- * next claimant.
- *
- * Note, although a warning is currently printed if the freeing client
- * info is not the same as the registrant's client info, the free is still
- * allowed to go through.
-*/
+static struct s3c24xx_dma_selection __initdata s3c2410_dma_sel = {
+	.select		= s3c2410_dma_select,
+	.dcon_mask	= 7 << 24,
+	.map		= s3c2410_dma_mappings,
+	.map_size	= ARRAY_SIZE(s3c2410_dma_mappings),
+};
 
-int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client)
+static int s3c2410_dma_add(struct sys_device *sysdev)
 {
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-	unsigned long flags;
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	local_irq_save(flags);
-
-	if (chan->client != client) {
-		printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
-		       channel, chan->client, client);
-	}
-
-	/* sort out stopping and freeing the channel */
-
-	if (chan->state != S3C2410_DMA_IDLE) {
-		pr_debug("%s: need to stop dma channel %p\n",
-		       __FUNCTION__, chan);
-
-		/* possibly flush the channel */
-		s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STOP);
-	}
-
-	chan->client = NULL;
-	chan->in_use = 0;
-
-	if (chan->irq_claimed)
-		free_irq(chan->irq, (void *)chan);
-
-	chan->irq_claimed = 0;
-
-	if (!(channel & DMACH_LOW_LEVEL))
-		dma_chan_map[channel] = NULL;
-
-	local_irq_restore(flags);
-
-	return 0;
+	return s3c24xx_dma_init_map(&s3c2410_dma_sel);
 }
 
-EXPORT_SYMBOL(s3c2410_dma_free);
-
-static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan)
-{
-	unsigned long flags;
-	unsigned long tmp;
-
-	pr_debug("%s:\n", __FUNCTION__);
-
-	dbg_showchan(chan);
-
-	local_irq_save(flags);
-
-	s3c2410_dma_call_op(chan,  S3C2410_DMAOP_STOP);
-
-	tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
-	tmp |= S3C2410_DMASKTRIG_STOP;
-	//tmp &= ~S3C2410_DMASKTRIG_ON;
-	dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
-
-#if 0
-	/* should also clear interrupts, according to WinCE BSP */
-	tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
-	tmp |= S3C2410_DCON_NORELOAD;
-	dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
-#endif
-
-	/* should stop do this, or should we wait for flush? */
-	chan->state      = S3C2410_DMA_IDLE;
-	chan->load_state = S3C2410_DMALOAD_NONE;
-
-	local_irq_restore(flags);
-
-	return 0;
-}
+#if defined(CONFIG_CPU_S3C2410)
+static struct sysdev_driver s3c2410_dma_driver = {
+	.add	= s3c2410_dma_add,
+};
 
-void s3c2410_dma_waitforstop(struct s3c2410_dma_chan *chan)
+static int __init s3c2410_dma_init(void)
 {
-	unsigned long tmp;
-	unsigned int timeout = 0x10000;
-
-	while (timeout-- > 0) {
-		tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
-
-		if (!(tmp & S3C2410_DMASKTRIG_ON))
-			return;
-	}
-
-	pr_debug("dma%d: failed to stop?\n", chan->number);
+	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_dma_driver);
 }
 
-
-/* s3c2410_dma_flush
- *
- * stop the channel, and remove all current and pending transfers
-*/
-
-static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan)
-{
-	struct s3c2410_dma_buf *buf, *next;
-	unsigned long flags;
-
-	pr_debug("%s: chan %p (%d)\n", __FUNCTION__, chan, chan->number);
-
-	dbg_showchan(chan);
-
-	local_irq_save(flags);
-
-	if (chan->state != S3C2410_DMA_IDLE) {
-		pr_debug("%s: stopping channel...\n", __FUNCTION__ );
-		s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP);
-	}
-
-	buf = chan->curr;
-	if (buf == NULL)
-		buf = chan->next;
-
-	chan->curr = chan->next = chan->end = NULL;
-
-	if (buf != NULL) {
-		for ( ; buf != NULL; buf = next) {
-			next = buf->next;
-
-			pr_debug("%s: free buffer %p, next %p\n",
-			       __FUNCTION__, buf, buf->next);
-
-			s3c2410_dma_buffdone(chan, buf, S3C2410_RES_ABORT);
-			s3c2410_dma_freebuf(buf);
-		}
-	}
-
-	dbg_showregs(chan);
-
-	s3c2410_dma_waitforstop(chan);
-
-#if 0
-	/* should also clear interrupts, according to WinCE BSP */
-	{
-		unsigned long tmp;
-
-		tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
-		tmp |= S3C2410_DCON_NORELOAD;
-		dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
-	}
+arch_initcall(s3c2410_dma_init);
 #endif
 
-	dbg_showregs(chan);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-int
-s3c2410_dma_started(struct s3c2410_dma_chan *chan)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	dbg_showchan(chan);
-
-	/* if we've only loaded one buffer onto the channel, then chec
-	 * to see if we have another, and if so, try and load it so when
-	 * the first buffer is finished, the new one will be loaded onto
-	 * the channel */
-
-	if (chan->next != NULL) {
-		if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
-
-			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
-				pr_debug("%s: buff not yet loaded, no more todo\n",
-					 __FUNCTION__);
-			} else {
-				chan->load_state = S3C2410_DMALOAD_1RUNNING;
-				s3c2410_dma_loadbuffer(chan, chan->next);
-			}
-
-		} else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
-			s3c2410_dma_loadbuffer(chan, chan->next);
-		}
-	}
-
-
-	local_irq_restore(flags);
-
-	return 0;
-
-}
-
-int
-s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	switch (op) {
-	case S3C2410_DMAOP_START:
-		return s3c2410_dma_start(chan);
-
-	case S3C2410_DMAOP_STOP:
-		return s3c2410_dma_dostop(chan);
-
-	case S3C2410_DMAOP_PAUSE:
-	case S3C2410_DMAOP_RESUME:
-		return -ENOENT;
-
-	case S3C2410_DMAOP_FLUSH:
-		return s3c2410_dma_flush(chan);
-
-	case S3C2410_DMAOP_STARTED:
-		return s3c2410_dma_started(chan);
-
-	case S3C2410_DMAOP_TIMEOUT:
-		return 0;
-
-	}
-
-	return -ENOENT;      /* unknown, don't bother */
-}
-
-EXPORT_SYMBOL(s3c2410_dma_ctrl);
-
-/* DMA configuration for each channel
- *
- * DISRCC -> source of the DMA (AHB,APB)
- * DISRC  -> source address of the DMA
- * DIDSTC -> destination of the DMA (AHB,APD)
- * DIDST  -> destination address of the DMA
-*/
-
-/* s3c2410_dma_config
- *
- * xfersize:     size of unit in bytes (1,2,4)
- * dcon:         base value of the DCONx register
-*/
-
-int s3c2410_dma_config(dmach_t channel,
-		       int xferunit,
-		       int dcon)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
-		 __FUNCTION__, channel, xferunit, dcon);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: Initial dcon is %08x\n", __FUNCTION__, dcon);
-
-	dcon |= chan->dcon & dma_sel.dcon_mask;
-
-	pr_debug("%s: New dcon is %08x\n", __FUNCTION__, dcon);
-
-	switch (xferunit) {
-	case 1:
-		dcon |= S3C2410_DCON_BYTE;
-		break;
-
-	case 2:
-		dcon |= S3C2410_DCON_HALFWORD;
-		break;
-
-	case 4:
-		dcon |= S3C2410_DCON_WORD;
-		break;
-
-	default:
-		pr_debug("%s: bad transfer size %d\n", __FUNCTION__, xferunit);
-		return -EINVAL;
-	}
-
-	dcon |= S3C2410_DCON_HWTRIG;
-	dcon |= S3C2410_DCON_INTREQ;
-
-	pr_debug("%s: dcon now %08x\n", __FUNCTION__, dcon);
-
-	chan->dcon = dcon;
-	chan->xfer_unit = xferunit;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_config);
-
-int s3c2410_dma_setflags(dmach_t channel, unsigned int flags)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, flags=%08x\n", __FUNCTION__, chan, flags);
-
-	chan->flags = flags;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_setflags);
-
-
-/* do we need to protect the settings of the fields from
- * irq?
-*/
-
-int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, op rtn=%p\n", __FUNCTION__, chan, rtn);
-
-	chan->op_fn = rtn;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_set_opfn);
-
-int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, callback rtn=%p\n", __FUNCTION__, chan, rtn);
-
-	chan->callback_fn = rtn;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
-
-/* s3c2410_dma_devconfig
- *
- * configure the dma source/destination hardware type and address
- *
- * source:    S3C2410_DMASRC_HW: source is hardware
- *            S3C2410_DMASRC_MEM: source is memory
- *
- * hwcfg:     the value for xxxSTCn register,
- *            bit 0: 0=increment pointer, 1=leave pointer
- *            bit 1: 0=soucre is AHB, 1=soucre is APB
- *
- * devaddr:   physical address of the source
-*/
-
-int s3c2410_dma_devconfig(int channel,
-			  enum s3c2410_dmasrc source,
-			  int hwcfg,
-			  unsigned long devaddr)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n",
-		 __FUNCTION__, (int)source, hwcfg, devaddr);
-
-	chan->source = source;
-	chan->dev_addr = devaddr;
-
-	switch (source) {
-	case S3C2410_DMASRC_HW:
-		/* source is hardware */
-		pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n",
-			 __FUNCTION__, devaddr, hwcfg);
-		dma_wrreg(chan, S3C2410_DMA_DISRCC, hwcfg & 3);
-		dma_wrreg(chan, S3C2410_DMA_DISRC,  devaddr);
-		dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0));
-
-		chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST);
-		return 0;
-
-	case S3C2410_DMASRC_MEM:
-		/* source is memory */
-		pr_debug( "%s: mem source, devaddr=%08lx, hwcfg=%d\n",
-			  __FUNCTION__, devaddr, hwcfg);
-		dma_wrreg(chan, S3C2410_DMA_DISRCC, (0<<1) | (0<<0));
-		dma_wrreg(chan, S3C2410_DMA_DIDST,  devaddr);
-		dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3);
-
-		chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DISRC);
-		return 0;
-	}
-
-	printk(KERN_ERR "dma%d: invalid source type (%d)\n", channel, source);
-	return -EINVAL;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_devconfig);
-
-/* s3c2410_dma_getposition
- *
- * returns the current transfer points for the dma source and destination
-*/
-
-int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst)
-{
- 	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	if (src != NULL)
- 		*src = dma_rdreg(chan, S3C2410_DMA_DCSRC);
-
- 	if (dst != NULL)
- 		*dst = dma_rdreg(chan, S3C2410_DMA_DCDST);
-
- 	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_getposition);
-
-
-/* system device class */
-
-#ifdef CONFIG_PM
-
-static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state)
-{
-	struct s3c2410_dma_chan *cp = container_of(dev, struct s3c2410_dma_chan, dev);
-
-	printk(KERN_DEBUG "suspending dma channel %d\n", cp->number);
-
-	if (dma_rdreg(cp, S3C2410_DMA_DMASKTRIG) & S3C2410_DMASKTRIG_ON) {
-		/* the dma channel is still working, which is probably
-		 * a bad thing to do over suspend/resume. We stop the
-		 * channel and assume that the client is either going to
-		 * retry after resume, or that it is broken.
-		 */
-
-		printk(KERN_INFO "dma: stopping channel %d due to suspend\n",
-		       cp->number);
-
-		s3c2410_dma_dostop(cp);
-	}
-
-	return 0;
-}
-
-static int s3c2410_dma_resume(struct sys_device *dev)
-{
-	return 0;
-}
-
-#else
-#define s3c2410_dma_suspend NULL
-#define s3c2410_dma_resume  NULL
-#endif /* CONFIG_PM */
-
-struct sysdev_class dma_sysclass = {
-	set_kset_name("s3c24xx-dma"),
-	.suspend	= s3c2410_dma_suspend,
-	.resume		= s3c2410_dma_resume,
+#if defined(CONFIG_CPU_S3C2442)
+/* S3C2442 DMA contains the same selection table as the S3C2410 */
+static struct sysdev_driver s3c2442_dma_driver = {
+	.add	= s3c2410_dma_add,
 };
 
-/* kmem cache implementation */
-
-static void s3c2410_dma_cache_ctor(void *p, struct kmem_cache *c, unsigned long f)
-{
-	memset(p, 0, sizeof(struct s3c2410_dma_buf));
-}
-
-/* initialisation code */
-
-static int __init s3c2410_init_dma(void)
-{
-	struct s3c2410_dma_chan *cp;
-	int channel;
-	int ret;
-
-	printk("S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics\n");
-
-	dma_base = ioremap(S3C24XX_PA_DMA, 0x200);
-	if (dma_base == NULL) {
-		printk(KERN_ERR "dma failed to remap register block\n");
-		return -ENOMEM;
-	}
-
-	printk("Registering sysclass\n");
-
-	ret = sysdev_class_register(&dma_sysclass);
-	if (ret != 0) {
-		printk(KERN_ERR "dma sysclass registration failed\n");
-		goto err;
-	}
-
-	dma_kmem = kmem_cache_create("dma_desc", sizeof(struct s3c2410_dma_buf), 0,
-				     SLAB_HWCACHE_ALIGN,
-				     s3c2410_dma_cache_ctor, NULL);
-
-	if (dma_kmem == NULL) {
-		printk(KERN_ERR "dma failed to make kmem cache\n");
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	for (channel = 0; channel < S3C2410_DMA_CHANNELS; channel++) {
-		cp = &s3c2410_chans[channel];
-
-		memset(cp, 0, sizeof(struct s3c2410_dma_chan));
-
-		/* dma channel irqs are in order.. */
-		cp->number = channel;
-		cp->irq    = channel + IRQ_DMA0;
-		cp->regs   = dma_base + (channel*0x40);
-
-		/* point current stats somewhere */
-		cp->stats  = &cp->stats_store;
-		cp->stats_store.timeout_shortest = LONG_MAX;
-
-		/* basic channel configuration */
-
-		cp->load_timeout = 1<<18;
-
-		/* register system device */
-
-		cp->dev.cls = &dma_sysclass;
-		cp->dev.id  = channel;
-		ret = sysdev_register(&cp->dev);
-
-		printk("DMA channel %d at %p, irq %d\n",
-		       cp->number, cp->regs, cp->irq);
-	}
-
-	return 0;
-
- err:
-	kmem_cache_destroy(dma_kmem);
-	iounmap(dma_base);
-	dma_base = NULL;
-	return ret;
-}
-
-core_initcall(s3c2410_init_dma);
-
-static inline int is_channel_valid(unsigned int channel)
+static int __init s3c2442_dma_init(void)
 {
-	return (channel & DMA_CH_VALID);
+	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_dma_driver);
 }
 
-/* s3c2410_dma_map_channel()
- *
- * turn the virtual channel number into a real, and un-used hardware
- * channel.
- *
- * currently this code uses first-free channel from the specified harware
- * map, not taking into account anything that the board setup code may
- * have to say about the likely peripheral set to be in use.
-*/
-
-struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
-{
-	struct s3c24xx_dma_map *ch_map;
-	struct s3c2410_dma_chan *dmach;
-	int ch;
-
-	if (dma_sel.map == NULL || channel > dma_sel.map_size)
-		return NULL;
-
-	ch_map = dma_sel.map + channel;
-
-	for (ch = 0; ch < S3C2410_DMA_CHANNELS; ch++) {
-		if (!is_channel_valid(ch_map->channels[ch]))
-			continue;
-
-		if (s3c2410_chans[ch].in_use == 0) {
-			printk("mapped channel %d to %d\n", channel, ch);
-			break;
-		}
-	}
-
-	if (ch >= S3C2410_DMA_CHANNELS)
-		return NULL;
-
-	/* update our channel mapping */
-
-	dmach = &s3c2410_chans[ch];
-	dma_chan_map[channel] = dmach;
-
-	/* select the channel */
-
-	(dma_sel.select)(dmach, ch_map);
-
-	return dmach;
-}
-
-static void s3c24xx_dma_show_ch(struct s3c24xx_dma_map *map, int ch)
-{
-	/* show the channel configuration */
-
-	printk("%2d: %20s, channels %c%c%c%c\n", ch, map->name,
-	       (is_channel_valid(map->channels[0]) ? '0' : '-'),
-	       (is_channel_valid(map->channels[1]) ? '1' : '-'),
-	       (is_channel_valid(map->channels[2]) ? '2' : '-'),
-	       (is_channel_valid(map->channels[3]) ? '3' : '-'));
-}
-
-static int s3c24xx_dma_check_entry(struct s3c24xx_dma_map *map, int ch)
-{
-	if (1)
-		s3c24xx_dma_show_ch(map, ch);
-
-	return 0;
-}
-
-int __init s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel)
-{
-	struct s3c24xx_dma_map *nmap;
-	size_t map_sz = sizeof(*nmap) * sel->map_size;
-	int ptr;
-
-	nmap = kmalloc(map_sz, GFP_KERNEL);
-	if (nmap == NULL)
-		return -ENOMEM;
-
-	memcpy(nmap, sel->map, map_sz);
-	memcpy(&dma_sel, sel, sizeof(*sel));
-
-	dma_sel.map = nmap;
-
-	for (ptr = 0; ptr < sel->map_size; ptr++)
-		s3c24xx_dma_check_entry(nmap+ptr, ptr);
+arch_initcall(s3c2442_dma_init);
+#endif
 
-	return 0;
-}
diff --git a/arch/arm/mach-s3c2410/dma.h b/arch/arm/mach-s3c2410/dma.h
deleted file mode 100644
index 0ebfe0a..0000000
--- a/arch/arm/mach-s3c2410/dma.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* arch/arm/mach-s3c2410/dma.h
- *
- * Copyright (C) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C24XX DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern struct sysdev_class dma_sysclass;
-extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
-
-#define DMA_CH_VALID		(1<<31)
-
-struct s3c24xx_dma_addr {
-	unsigned long		from;
-	unsigned long		to;
-};
-
-/* struct s3c24xx_dma_map
- *
- * this holds the mapping information for the channel selected
- * to be connected to the specified device
-*/
-
-struct s3c24xx_dma_map {
-	const char		*name;
-	struct s3c24xx_dma_addr  hw_addr;
-
-	unsigned long		 channels[S3C2410_DMA_CHANNELS];
-};
-
-struct s3c24xx_dma_selection {
-	struct s3c24xx_dma_map	*map;
-	unsigned long		 map_size;
-	unsigned long		 dcon_mask;
-
-	void	(*select)(struct s3c2410_dma_chan *chan,
-			  struct s3c24xx_dma_map *map);
-};
-
-extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index f6fb215..01e795d 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -1,9 +1,9 @@
 /* linux/arch/arm/mach-s3c2410/gpio.c
  *
- * Copyright (c) 2004-2005 Simtec Electronics
+ * Copyright (c) 2004-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C24XX GPIO support
+ * S3C2410 GPIO support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -18,8 +18,7 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
+ */
 
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -33,156 +32,40 @@
 
 #include <asm/arch/regs-gpio.h>
 
-void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function)
-{
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long mask;
-	unsigned long con;
-	unsigned long flags;
-
-	if (pin < S3C2410_GPIO_BANKB) {
-		mask = 1 << S3C2410_GPIO_OFFSET(pin);
-	} else {
-		mask = 3 << S3C2410_GPIO_OFFSET(pin)*2;
-	}
-
-	switch (function) {
-	case S3C2410_GPIO_LEAVE:
-		mask = 0;
-		function = 0;
-		break;
-
-	case S3C2410_GPIO_INPUT:
-	case S3C2410_GPIO_OUTPUT:
-	case S3C2410_GPIO_SFN2:
-	case S3C2410_GPIO_SFN3:
-		if (pin < S3C2410_GPIO_BANKB) {
-			function -= 1;
-			function &= 1;
-			function <<= S3C2410_GPIO_OFFSET(pin);
-		} else {
-			function &= 3;
-			function <<= S3C2410_GPIO_OFFSET(pin)*2;
-		}
-	}
-
-	/* modify the specified register wwith IRQs off */
-
-	local_irq_save(flags);
-
-	con  = __raw_readl(base + 0x00);
-	con &= ~mask;
-	con |= function;
-
-	__raw_writel(con, base + 0x00);
-
-	local_irq_restore(flags);
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_cfgpin);
-
-unsigned int s3c2410_gpio_getcfg(unsigned int pin)
-{
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long val = __raw_readl(base);
-
-	if (pin < S3C2410_GPIO_BANKB) {
-		val >>= S3C2410_GPIO_OFFSET(pin);
-		val &= 1;
-		val += 1;
-	} else {
-		val >>= S3C2410_GPIO_OFFSET(pin)*2;
-		val &= 3;
-	}
-
-	return val | S3C2410_GPIO_INPUT;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_getcfg);
-
-void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
+int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
+			   unsigned int config)
 {
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+	void __iomem *reg = S3C24XX_EINFLT0;
 	unsigned long flags;
-	unsigned long up;
-
-	if (pin < S3C2410_GPIO_BANKB)
-		return;
-
-	local_irq_save(flags);
-
-	up = __raw_readl(base + 0x08);
-	up &= ~(1L << offs);
-	up |= to << offs;
-	__raw_writel(up, base + 0x08);
+	unsigned long val;
 
-	local_irq_restore(flags);
-}
+	if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15)
+		return -1;
 
-EXPORT_SYMBOL(s3c2410_gpio_pullup);
+	config &= 0xff;
 
-void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
-{
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
-	unsigned long flags;
-	unsigned long dat;
+	pin -= S3C2410_GPG8;
+	reg += pin & ~3;
 
 	local_irq_save(flags);
 
-	dat = __raw_readl(base + 0x04);
-	dat &= ~(1 << offs);
-	dat |= to << offs;
-	__raw_writel(dat, base + 0x04);
-
-	local_irq_restore(flags);
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_setpin);
-
-unsigned int s3c2410_gpio_getpin(unsigned int pin)
-{
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+	/* update filter width and clock source */
 
-	return __raw_readl(base + 0x04) & (1<< offs);
-}
+	val = __raw_readl(reg);
+	val &= ~(0xff << ((pin & 3) * 8));
+	val |= config << ((pin & 3) * 8);
+	__raw_writel(val, reg);
 
-EXPORT_SYMBOL(s3c2410_gpio_getpin);
+	/* update filter enable */
 
-unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
-{
-	unsigned long flags;
-	unsigned long misccr;
+	val = __raw_readl(S3C24XX_EXTINT2);
+	val &= ~(1 << ((pin * 4) + 3));
+	val |= on << ((pin * 4) + 3);
+	__raw_writel(val, S3C24XX_EXTINT2);
 
-	local_irq_save(flags);
-	misccr = __raw_readl(S3C24XX_MISCCR);
-	misccr &= ~clear;
-	misccr ^= change;
-	__raw_writel(misccr, S3C24XX_MISCCR);
 	local_irq_restore(flags);
 
-	return misccr;
-}
-
-EXPORT_SYMBOL(s3c2410_modify_misccr);
-
-int s3c2410_gpio_getirq(unsigned int pin)
-{
-	if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15)
-		return -1;	/* not valid interrupts */
-
-	if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7)
-		return -1;	/* not valid pin */
-
-	if (pin < S3C2410_GPF4)
-		return (pin - S3C2410_GPF0) + IRQ_EINT0;
-
-	if (pin < S3C2410_GPG0)
-		return (pin - S3C2410_GPF4) + IRQ_EINT4;
-
-	return (pin - S3C2410_GPG0) + IRQ_EINT8;
+	return 0;
 }
 
-EXPORT_SYMBOL(s3c2410_gpio_getirq);
+EXPORT_SYMBOL(s3c2410_gpio_irqfilter);
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
index 3c0ed78..53cbdaa 100644
--- a/arch/arm/mach-s3c2410/irq.c
+++ b/arch/arm/mach-s3c2410/irq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/irq.c
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -17,37 +17,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  *
- * Changelog:
- *
- *   22-Jul-2004  Ben Dooks <ben@simtec.co.uk>
- *                Fixed compile warnings
- *
- *   22-Jul-2004  Roc Wu <cooloney@yahoo.com.cn>
- *                Fixed s3c_extirq_type
- *
- *   21-Jul-2004  Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
- *                Addition of ADC/TC demux
- *
- *   04-Oct-2004  Klaus Fetscher <k.fetscher@fetron.de>
- *		  Fix for set_irq_type() on low EINT numbers
- *
- *   05-Oct-2004  Ben Dooks <ben@simtec.co.uk>
- *		  Tidy up KF's patch and sort out new release
- *
- *   05-Oct-2004  Ben Dooks <ben@simtec.co.uk>
- *		  Add support for power management controls
- *
- *   04-Nov-2004  Ben Dooks
- *		  Fix standard IRQ wake for EINT0..4 and RTC
- *
- *   22-Feb-2005  Ben Dooks
- *		  Fixed edge-triggering on ADC IRQ
- *
- *   28-Jun-2005  Ben Dooks
- *		  Mark IRQ_LCD valid
- *
- *   25-Jul-2005  Ben Dooks
- *		  Split the S3C2440 IRQ code to seperate file
 */
 
 #include <linux/init.h>
@@ -57,745 +26,23 @@
 #include <linux/ptrace.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-#include <asm/mach/irq.h>
-
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
-
-#include "cpu.h"
-#include "pm.h"
-#include "irq.h"
-
-/* wakeup irq control */
-
-#ifdef CONFIG_PM
-
-/* state for IRQs over sleep */
-
-/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
- *
- * set bit to 1 in allow bitfield to enable the wakeup settings on it
-*/
-
-unsigned long s3c_irqwake_intallow	= 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL;
-unsigned long s3c_irqwake_intmask	= 0xffffffffL;
-unsigned long s3c_irqwake_eintallow	= 0x0000fff0L;
-unsigned long s3c_irqwake_eintmask	= 0xffffffffL;
-
-int
-s3c_irq_wake(unsigned int irqno, unsigned int state)
-{
-	unsigned long irqbit = 1 << (irqno - IRQ_EINT0);
-
-	if (!(s3c_irqwake_intallow & irqbit))
-		return -ENOENT;
-
-	printk(KERN_INFO "wake %s for irq %d\n",
-	       state ? "enabled" : "disabled", irqno);
-
-	if (!state)
-		s3c_irqwake_intmask |= irqbit;
-	else
-		s3c_irqwake_intmask &= ~irqbit;
-
-	return 0;
-}
-
-static int
-s3c_irqext_wake(unsigned int irqno, unsigned int state)
-{
-	unsigned long bit = 1L << (irqno - EXTINT_OFF);
-
-	if (!(s3c_irqwake_eintallow & bit))
-		return -ENOENT;
-
-	printk(KERN_INFO "wake %s for irq %d\n",
-	       state ? "enabled" : "disabled", irqno);
-
-	if (!state)
-		s3c_irqwake_eintmask |= bit;
-	else
-		s3c_irqwake_eintmask &= ~bit;
-
-	return 0;
-}
-
-#else
-#define s3c_irqext_wake NULL
-#define s3c_irq_wake NULL
-#endif
-
-
-static void
-s3c_irq_mask(unsigned int irqno)
-{
-	unsigned long mask;
-
-	irqno -= IRQ_EINT0;
-
-	mask = __raw_readl(S3C2410_INTMSK);
-	mask |= 1UL << irqno;
-	__raw_writel(mask, S3C2410_INTMSK);
-}
-
-static inline void
-s3c_irq_ack(unsigned int irqno)
-{
-	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
-
-	__raw_writel(bitval, S3C2410_SRCPND);
-	__raw_writel(bitval, S3C2410_INTPND);
-}
-
-static inline void
-s3c_irq_maskack(unsigned int irqno)
-{
-	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
-	unsigned long mask;
-
-	mask = __raw_readl(S3C2410_INTMSK);
-	__raw_writel(mask|bitval, S3C2410_INTMSK);
-
-	__raw_writel(bitval, S3C2410_SRCPND);
-	__raw_writel(bitval, S3C2410_INTPND);
-}
-
-
-static void
-s3c_irq_unmask(unsigned int irqno)
-{
-	unsigned long mask;
-
-	if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23)
-		irqdbf2("s3c_irq_unmask %d\n", irqno);
-
-	irqno -= IRQ_EINT0;
-
-	mask = __raw_readl(S3C2410_INTMSK);
-	mask &= ~(1UL << irqno);
-	__raw_writel(mask, S3C2410_INTMSK);
-}
-
-struct irq_chip s3c_irq_level_chip = {
-	.name		= "s3c-level",
-	.ack		= s3c_irq_maskack,
-	.mask		= s3c_irq_mask,
-	.unmask		= s3c_irq_unmask,
-	.set_wake	= s3c_irq_wake
-};
-
-static struct irq_chip s3c_irq_chip = {
-	.name		= "s3c",
-	.ack		= s3c_irq_ack,
-	.mask		= s3c_irq_mask,
-	.unmask		= s3c_irq_unmask,
-	.set_wake	= s3c_irq_wake
-};
-
-static void
-s3c_irqext_mask(unsigned int irqno)
-{
-	unsigned long mask;
-
-	irqno -= EXTINT_OFF;
-
-	mask = __raw_readl(S3C24XX_EINTMASK);
-	mask |= ( 1UL << irqno);
-	__raw_writel(mask, S3C24XX_EINTMASK);
-}
-
-static void
-s3c_irqext_ack(unsigned int irqno)
-{
-	unsigned long req;
-	unsigned long bit;
-	unsigned long mask;
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
 
-	bit = 1UL << (irqno - EXTINT_OFF);
-
-	mask = __raw_readl(S3C24XX_EINTMASK);
-
-	__raw_writel(bit, S3C24XX_EINTPEND);
-
-	req = __raw_readl(S3C24XX_EINTPEND);
-	req &= ~mask;
-
-	/* not sure if we should be acking the parent irq... */
-
-	if (irqno <= IRQ_EINT7 ) {
-		if ((req & 0xf0) == 0)
-			s3c_irq_ack(IRQ_EINT4t7);
-	} else {
-		if ((req >> 8) == 0)
-			s3c_irq_ack(IRQ_EINT8t23);
-	}
-}
-
-static void
-s3c_irqext_unmask(unsigned int irqno)
+static int s3c2410_irq_add(struct sys_device *sysdev)
 {
-	unsigned long mask;
-
-	irqno -= EXTINT_OFF;
-
-	mask = __raw_readl(S3C24XX_EINTMASK);
-	mask &= ~( 1UL << irqno);
-	__raw_writel(mask, S3C24XX_EINTMASK);
-}
-
-int
-s3c_irqext_type(unsigned int irq, unsigned int type)
-{
-	void __iomem *extint_reg;
-	void __iomem *gpcon_reg;
-	unsigned long gpcon_offset, extint_offset;
-	unsigned long newvalue = 0, value;
-
-	if ((irq >= IRQ_EINT0) && (irq <= IRQ_EINT3))
-	{
-		gpcon_reg = S3C2410_GPFCON;
-		extint_reg = S3C24XX_EXTINT0;
-		gpcon_offset = (irq - IRQ_EINT0) * 2;
-		extint_offset = (irq - IRQ_EINT0) * 4;
-	}
-	else if ((irq >= IRQ_EINT4) && (irq <= IRQ_EINT7))
-	{
-		gpcon_reg = S3C2410_GPFCON;
-		extint_reg = S3C24XX_EXTINT0;
-		gpcon_offset = (irq - (EXTINT_OFF)) * 2;
-		extint_offset = (irq - (EXTINT_OFF)) * 4;
-	}
-	else if ((irq >= IRQ_EINT8) && (irq <= IRQ_EINT15))
-	{
-		gpcon_reg = S3C2410_GPGCON;
-		extint_reg = S3C24XX_EXTINT1;
-		gpcon_offset = (irq - IRQ_EINT8) * 2;
-		extint_offset = (irq - IRQ_EINT8) * 4;
-	}
-	else if ((irq >= IRQ_EINT16) && (irq <= IRQ_EINT23))
-	{
-		gpcon_reg = S3C2410_GPGCON;
-		extint_reg = S3C24XX_EXTINT2;
-		gpcon_offset = (irq - IRQ_EINT8) * 2;
-		extint_offset = (irq - IRQ_EINT16) * 4;
-	} else
-		return -1;
-
-	/* Set the GPIO to external interrupt mode */
-	value = __raw_readl(gpcon_reg);
-	value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
-	__raw_writel(value, gpcon_reg);
-
-	/* Set the external interrupt to pointed trigger type */
-	switch (type)
-	{
-		case IRQT_NOEDGE:
-			printk(KERN_WARNING "No edge setting!\n");
-			break;
-
-		case IRQT_RISING:
-			newvalue = S3C2410_EXTINT_RISEEDGE;
-			break;
-
-		case IRQT_FALLING:
-			newvalue = S3C2410_EXTINT_FALLEDGE;
-			break;
-
-		case IRQT_BOTHEDGE:
-			newvalue = S3C2410_EXTINT_BOTHEDGE;
-			break;
-
-		case IRQT_LOW:
-			newvalue = S3C2410_EXTINT_LOWLEV;
-			break;
-
-		case IRQT_HIGH:
-			newvalue = S3C2410_EXTINT_HILEV;
-			break;
-
-		default:
-			printk(KERN_ERR "No such irq type %d", type);
-			return -1;
-	}
-
-	value = __raw_readl(extint_reg);
-	value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
-	__raw_writel(value, extint_reg);
-
 	return 0;
 }
 
-static struct irq_chip s3c_irqext_chip = {
-	.name		= "s3c-ext",
-	.mask		= s3c_irqext_mask,
-	.unmask		= s3c_irqext_unmask,
-	.ack		= s3c_irqext_ack,
-	.set_type	= s3c_irqext_type,
-	.set_wake	= s3c_irqext_wake
-};
-
-static struct irq_chip s3c_irq_eint0t4 = {
-	.name		= "s3c-ext0",
-	.ack		= s3c_irq_ack,
-	.mask		= s3c_irq_mask,
-	.unmask		= s3c_irq_unmask,
-	.set_wake	= s3c_irq_wake,
-	.set_type	= s3c_irqext_type,
-};
-
-/* mask values for the parent registers for each of the interrupt types */
-
-#define INTMSK_UART0	 (1UL << (IRQ_UART0 - IRQ_EINT0))
-#define INTMSK_UART1	 (1UL << (IRQ_UART1 - IRQ_EINT0))
-#define INTMSK_UART2	 (1UL << (IRQ_UART2 - IRQ_EINT0))
-#define INTMSK_ADCPARENT (1UL << (IRQ_ADCPARENT - IRQ_EINT0))
-
-
-/* UART0 */
-
-static void
-s3c_irq_uart0_mask(unsigned int irqno)
-{
-	s3c_irqsub_mask(irqno, INTMSK_UART0, 7);
-}
-
-static void
-s3c_irq_uart0_unmask(unsigned int irqno)
-{
-	s3c_irqsub_unmask(irqno, INTMSK_UART0);
-}
-
-static void
-s3c_irq_uart0_ack(unsigned int irqno)
-{
-	s3c_irqsub_maskack(irqno, INTMSK_UART0, 7);
-}
-
-static struct irq_chip s3c_irq_uart0 = {
-	.name		= "s3c-uart0",
-	.mask		= s3c_irq_uart0_mask,
-	.unmask		= s3c_irq_uart0_unmask,
-	.ack		= s3c_irq_uart0_ack,
-};
-
-/* UART1 */
-
-static void
-s3c_irq_uart1_mask(unsigned int irqno)
-{
-	s3c_irqsub_mask(irqno, INTMSK_UART1, 7 << 3);
-}
-
-static void
-s3c_irq_uart1_unmask(unsigned int irqno)
-{
-	s3c_irqsub_unmask(irqno, INTMSK_UART1);
-}
-
-static void
-s3c_irq_uart1_ack(unsigned int irqno)
-{
-	s3c_irqsub_maskack(irqno, INTMSK_UART1, 7 << 3);
-}
-
-static struct irq_chip s3c_irq_uart1 = {
-	.name		= "s3c-uart1",
-	.mask		= s3c_irq_uart1_mask,
-	.unmask		= s3c_irq_uart1_unmask,
-	.ack		= s3c_irq_uart1_ack,
-};
-
-/* UART2 */
-
-static void
-s3c_irq_uart2_mask(unsigned int irqno)
-{
-	s3c_irqsub_mask(irqno, INTMSK_UART2, 7 << 6);
-}
-
-static void
-s3c_irq_uart2_unmask(unsigned int irqno)
-{
-	s3c_irqsub_unmask(irqno, INTMSK_UART2);
-}
-
-static void
-s3c_irq_uart2_ack(unsigned int irqno)
-{
-	s3c_irqsub_maskack(irqno, INTMSK_UART2, 7 << 6);
-}
-
-static struct irq_chip s3c_irq_uart2 = {
-	.name		= "s3c-uart2",
-	.mask		= s3c_irq_uart2_mask,
-	.unmask		= s3c_irq_uart2_unmask,
-	.ack		= s3c_irq_uart2_ack,
-};
-
-/* ADC and Touchscreen */
-
-static void
-s3c_irq_adc_mask(unsigned int irqno)
-{
-	s3c_irqsub_mask(irqno, INTMSK_ADCPARENT, 3 << 9);
-}
-
-static void
-s3c_irq_adc_unmask(unsigned int irqno)
-{
-	s3c_irqsub_unmask(irqno, INTMSK_ADCPARENT);
-}
-
-static void
-s3c_irq_adc_ack(unsigned int irqno)
-{
-	s3c_irqsub_ack(irqno, INTMSK_ADCPARENT, 3 << 9);
-}
-
-static struct irq_chip s3c_irq_adc = {
-	.name		= "s3c-adc",
-	.mask		= s3c_irq_adc_mask,
-	.unmask		= s3c_irq_adc_unmask,
-	.ack		= s3c_irq_adc_ack,
-};
-
-/* irq demux for adc */
-static void s3c_irq_demux_adc(unsigned int irq,
-			      struct irq_desc *desc)
-{
-	unsigned int subsrc, submsk;
-	unsigned int offset = 9;
-	struct irq_desc *mydesc;
-
-	/* read the current pending interrupts, and the mask
-	 * for what it is available */
-
-	subsrc = __raw_readl(S3C2410_SUBSRCPND);
-	submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-	subsrc &= ~submsk;
-	subsrc >>= offset;
-	subsrc &= 3;
-
-	if (subsrc != 0) {
-		if (subsrc & 1) {
-			mydesc = irq_desc + IRQ_TC;
-			desc_handle_irq(IRQ_TC, mydesc);
-		}
-		if (subsrc & 2) {
-			mydesc = irq_desc + IRQ_ADC;
-			desc_handle_irq(IRQ_ADC, mydesc);
-		}
-	}
-}
-
-static void s3c_irq_demux_uart(unsigned int start)
-{
-	unsigned int subsrc, submsk;
-	unsigned int offset = start - IRQ_S3CUART_RX0;
-	struct irq_desc *desc;
-
-	/* read the current pending interrupts, and the mask
-	 * for what it is available */
-
-	subsrc = __raw_readl(S3C2410_SUBSRCPND);
-	submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-	irqdbf2("s3c_irq_demux_uart: start=%d (%d), subsrc=0x%08x,0x%08x\n",
-		start, offset, subsrc, submsk);
-
-	subsrc &= ~submsk;
-	subsrc >>= offset;
-	subsrc &= 7;
-
-	if (subsrc != 0) {
-		desc = irq_desc + start;
-
-		if (subsrc & 1)
-			desc_handle_irq(start, desc);
-
-		desc++;
-
-		if (subsrc & 2)
-			desc_handle_irq(start+1, desc);
-
-		desc++;
-
-		if (subsrc & 4)
-			desc_handle_irq(start+2, desc);
-	}
-}
-
-/* uart demux entry points */
-
-static void
-s3c_irq_demux_uart0(unsigned int irq,
-		    struct irq_desc *desc)
-{
-	irq = irq;
-	s3c_irq_demux_uart(IRQ_S3CUART_RX0);
-}
-
-static void
-s3c_irq_demux_uart1(unsigned int irq,
-		    struct irq_desc *desc)
-{
-	irq = irq;
-	s3c_irq_demux_uart(IRQ_S3CUART_RX1);
-}
-
-static void
-s3c_irq_demux_uart2(unsigned int irq,
-		    struct irq_desc *desc)
-{
-	irq = irq;
-	s3c_irq_demux_uart(IRQ_S3CUART_RX2);
-}
-
-static void
-s3c_irq_demux_extint8(unsigned int irq,
-		      struct irq_desc *desc)
-{
-	unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
-	unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
-
-	eintpnd &= ~eintmsk;
-	eintpnd &= ~0xff;	/* ignore lower irqs */
-
-	/* we may as well handle all the pending IRQs here */
-
-	while (eintpnd) {
-		irq = __ffs(eintpnd);
-		eintpnd &= ~(1<<irq);
-
-		irq += (IRQ_EINT4 - 4);
-		desc_handle_irq(irq, irq_desc + irq);
-	}
-
-}
-
-static void
-s3c_irq_demux_extint4t7(unsigned int irq,
-			struct irq_desc *desc)
-{
-	unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
-	unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
-
-	eintpnd &= ~eintmsk;
-	eintpnd &= 0xff;	/* only lower irqs */
-
-	/* we may as well handle all the pending IRQs here */
-
-	while (eintpnd) {
-		irq = __ffs(eintpnd);
-		eintpnd &= ~(1<<irq);
-
-		irq += (IRQ_EINT4 - 4);
-
-		desc_handle_irq(irq, irq_desc + irq);
-	}
-}
-
-#ifdef CONFIG_PM
-
-static struct sleep_save irq_save[] = {
-	SAVE_ITEM(S3C2410_INTMSK),
-	SAVE_ITEM(S3C2410_INTSUBMSK),
+static struct sysdev_driver s3c2410_irq_driver = {
+	.add		= s3c2410_irq_add,
+	.suspend	= s3c24xx_irq_suspend,
+	.resume		= s3c24xx_irq_resume,
 };
 
-/* the extint values move between the s3c2410/s3c2440 and the s3c2412
- * so we use an array to hold them, and to calculate the address of
- * the register at run-time
-*/
-
-static unsigned long save_extint[3];
-static unsigned long save_eintflt[4];
-static unsigned long save_eintmask;
-
-int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
+static int s3c2410_irq_init(void)
 {
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(save_extint); i++)
-		save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4));
-
-	for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
-		save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4));
-
-	s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
-	save_eintmask = __raw_readl(S3C24XX_EINTMASK);
-
-	return 0;
+	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver);
 }
 
-int s3c24xx_irq_resume(struct sys_device *dev)
-{
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(save_extint); i++)
-		__raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4));
-
-	for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
-		__raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4));
-
-	s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
-	__raw_writel(save_eintmask, S3C24XX_EINTMASK);
-
-	return 0;
-}
-
-#else
-#define s3c24xx_irq_suspend NULL
-#define s3c24xx_irq_resume  NULL
-#endif
-
-/* s3c24xx_init_irq
- *
- * Initialise S3C2410 IRQ system
-*/
-
-void __init s3c24xx_init_irq(void)
-{
-	unsigned long pend;
-	unsigned long last;
-	int irqno;
-	int i;
-
-	irqdbf("s3c2410_init_irq: clearing interrupt status flags\n");
-
-	/* first, clear all interrupts pending... */
-
-	last = 0;
-	for (i = 0; i < 4; i++) {
-		pend = __raw_readl(S3C24XX_EINTPEND);
-
-		if (pend == 0 || pend == last)
-			break;
-
-		__raw_writel(pend, S3C24XX_EINTPEND);
-		printk("irq: clearing pending ext status %08x\n", (int)pend);
-		last = pend;
-	}
-
-	last = 0;
-	for (i = 0; i < 4; i++) {
-		pend = __raw_readl(S3C2410_INTPND);
-
-		if (pend == 0 || pend == last)
-			break;
-
-		__raw_writel(pend, S3C2410_SRCPND);
-		__raw_writel(pend, S3C2410_INTPND);
-		printk("irq: clearing pending status %08x\n", (int)pend);
-		last = pend;
-	}
-
-	last = 0;
-	for (i = 0; i < 4; i++) {
-		pend = __raw_readl(S3C2410_SUBSRCPND);
-
-		if (pend == 0 || pend == last)
-			break;
-
-		printk("irq: clearing subpending status %08x\n", (int)pend);
-		__raw_writel(pend, S3C2410_SUBSRCPND);
-		last = pend;
-	}
-
-	/* register the main interrupts */
-
-	irqdbf("s3c2410_init_irq: registering s3c2410 interrupt handlers\n");
-
-	for (irqno = IRQ_EINT4t7; irqno <= IRQ_ADCPARENT; irqno++) {
-		/* set all the s3c2410 internal irqs */
-
-		switch (irqno) {
-			/* deal with the special IRQs (cascaded) */
-
-		case IRQ_EINT4t7:
-		case IRQ_EINT8t23:
-		case IRQ_UART0:
-		case IRQ_UART1:
-		case IRQ_UART2:
-		case IRQ_ADCPARENT:
-			set_irq_chip(irqno, &s3c_irq_level_chip);
-			set_irq_handler(irqno, handle_level_irq);
-			break;
-
-		case IRQ_RESERVED6:
-		case IRQ_RESERVED24:
-			/* no IRQ here */
-			break;
-
-		default:
-			//irqdbf("registering irq %d (s3c irq)\n", irqno);
-			set_irq_chip(irqno, &s3c_irq_chip);
-			set_irq_handler(irqno, handle_edge_irq);
-			set_irq_flags(irqno, IRQF_VALID);
-		}
-	}
-
-	/* setup the cascade irq handlers */
-
-	set_irq_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint4t7);
-	set_irq_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint8);
-
-	set_irq_chained_handler(IRQ_UART0, s3c_irq_demux_uart0);
-	set_irq_chained_handler(IRQ_UART1, s3c_irq_demux_uart1);
-	set_irq_chained_handler(IRQ_UART2, s3c_irq_demux_uart2);
-	set_irq_chained_handler(IRQ_ADCPARENT, s3c_irq_demux_adc);
-
-	/* external interrupts */
-
-	for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
-		irqdbf("registering irq %d (ext int)\n", irqno);
-		set_irq_chip(irqno, &s3c_irq_eint0t4);
-		set_irq_handler(irqno, handle_edge_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	for (irqno = IRQ_EINT4; irqno <= IRQ_EINT23; irqno++) {
-		irqdbf("registering irq %d (extended s3c irq)\n", irqno);
-		set_irq_chip(irqno, &s3c_irqext_chip);
-		set_irq_handler(irqno, handle_edge_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	/* register the uart interrupts */
-
-	irqdbf("s3c2410: registering external interrupts\n");
-
-	for (irqno = IRQ_S3CUART_RX0; irqno <= IRQ_S3CUART_ERR0; irqno++) {
-		irqdbf("registering irq %d (s3c uart0 irq)\n", irqno);
-		set_irq_chip(irqno, &s3c_irq_uart0);
-		set_irq_handler(irqno, handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	for (irqno = IRQ_S3CUART_RX1; irqno <= IRQ_S3CUART_ERR1; irqno++) {
-		irqdbf("registering irq %d (s3c uart1 irq)\n", irqno);
-		set_irq_chip(irqno, &s3c_irq_uart1);
-		set_irq_handler(irqno, handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	for (irqno = IRQ_S3CUART_RX2; irqno <= IRQ_S3CUART_ERR2; irqno++) {
-		irqdbf("registering irq %d (s3c uart2 irq)\n", irqno);
-		set_irq_chip(irqno, &s3c_irq_uart2);
-		set_irq_handler(irqno, handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	for (irqno = IRQ_TC; irqno <= IRQ_ADC; irqno++) {
-		irqdbf("registering irq %d (s3c adc irq)\n", irqno);
-		set_irq_chip(irqno, &s3c_irq_adc);
-		set_irq_handler(irqno, handle_edge_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	irqdbf("s3c2410: registered interrupt handlers\n");
-}
+arch_initcall(s3c2410_irq_init);
diff --git a/arch/arm/mach-s3c2410/irq.h b/arch/arm/mach-s3c2410/irq.h
deleted file mode 100644
index e5913da..0000000
--- a/arch/arm/mach-s3c2410/irq.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/* arch/arm/mach-s3c2410/irq.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C24XX CPU IRQ support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define irqdbf(x...)
-#define irqdbf2(x...)
-
-#define EXTINT_OFF (IRQ_EINT4 - 4)
-
-extern struct irq_chip s3c_irq_level_chip;
-
-static inline void
-s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
-		int subcheck)
-{
-	unsigned long mask;
-	unsigned long submask;
-
-	submask = __raw_readl(S3C2410_INTSUBMSK);
-	mask = __raw_readl(S3C2410_INTMSK);
-
-	submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
-
-	/* check to see if we need to mask the parent IRQ */
-
-	if ((submask  & subcheck) == subcheck) {
-		__raw_writel(mask | parentbit, S3C2410_INTMSK);
-	}
-
-	/* write back masks */
-	__raw_writel(submask, S3C2410_INTSUBMSK);
-
-}
-
-static inline void
-s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
-{
-	unsigned long mask;
-	unsigned long submask;
-
-	submask = __raw_readl(S3C2410_INTSUBMSK);
-	mask = __raw_readl(S3C2410_INTMSK);
-
-	submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
-	mask &= ~parentbit;
-
-	/* write back masks */
-	__raw_writel(submask, S3C2410_INTSUBMSK);
-	__raw_writel(mask, S3C2410_INTMSK);
-}
-
-
-static inline void
-s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int group)
-{
-	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
-	s3c_irqsub_mask(irqno, parentmask, group);
-
-	__raw_writel(bit, S3C2410_SUBSRCPND);
-
-	/* only ack parent if we've got all the irqs (seems we must
-	 * ack, all and hope that the irq system retriggers ok when
-	 * the interrupt goes off again)
-	 */
-
-	if (1) {
-		__raw_writel(parentmask, S3C2410_SRCPND);
-		__raw_writel(parentmask, S3C2410_INTPND);
-	}
-}
-
-static inline void
-s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group)
-{
-	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
-	__raw_writel(bit, S3C2410_SUBSRCPND);
-
-	/* only ack parent if we've got all the irqs (seems we must
-	 * ack, all and hope that the irq system retriggers ok when
-	 * the interrupt goes off again)
-	 */
-
-	if (1) {
-		__raw_writel(parentmask, S3C2410_SRCPND);
-		__raw_writel(parentmask, S3C2410_INTPND);
-	}
-}
-
-/* exported for use in arch/arm/mach-s3c2410 */
-
-#ifdef CONFIG_PM
-extern int s3c_irq_wake(unsigned int irqno, unsigned int state);
-#else
-#define s3c_irq_wake NULL
-#endif
-
-extern int s3c_irqext_type(unsigned int irq, unsigned int type);
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index 817e2c6..d54cda1 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -1,4 +1,4 @@
-/***********************************************************************
+/* linux/arch/arm/mach-s3c2410/mach-amlm5900.c
  *
  * linux/arch/arm/mach-s3c2410/mach-amlm5900.c
  *
@@ -52,8 +52,8 @@
 #include <asm/arch/regs-lcd.h>
 #include <asm/arch/regs-gpio.h>
 
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
 
 #ifdef CONFIG_MTD_PARTITIONS
 
diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2410/mach-anubis.c
deleted file mode 100644
index 0fad0c2..0000000
--- a/arch/arm/mach-s3c2410/mach-anubis.c
+++ /dev/null
@@ -1,325 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/mach-anubis.c
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/arch/anubis-map.h>
-#include <asm/arch/anubis-irq.h>
-#include <asm/arch/anubis-cpld.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/nand.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
-
-#define COPYRIGHT ", (c) 2005 Simtec Electronics"
-
-static struct map_desc anubis_iodesc[] __initdata = {
-  /* ISA IO areas */
-
-  {
-	.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-	.pfn		= __phys_to_pfn(0x0),
-	.length		= SZ_4M,
-	.type		= MT_DEVICE,
-  }, {
-	.virtual	= (u32)S3C24XX_VA_ISA_WORD,
-	.pfn		= __phys_to_pfn(0x0),
-	.length 	= SZ_4M,
-	.type		= MT_DEVICE,
-  },
-
-  /* we could possibly compress the next set down into a set of smaller tables
-   * pagetables, but that would mean using an L2 section, and it still means
-   * we cannot actually feed the same register to an LDR due to 16K spacing
-   */
-
-  /* CPLD control registers */
-
-  {
-	.virtual	= (u32)ANUBIS_VA_CTRL1,
-	.pfn		= __phys_to_pfn(ANUBIS_PA_CTRL1),
-	.length		= SZ_4K,
-	.type		= MT_DEVICE,
-  }, {
-	.virtual	= (u32)ANUBIS_VA_CTRL2,
-	.pfn		= __phys_to_pfn(ANUBIS_PA_CTRL2),
-	.length		= SZ_4K,
-	.type		= MT_DEVICE,
-  },
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c24xx_uart_clksrc anubis_serial_clocks[] = {
-	[0] = {
-		.name		= "uclk",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	},
-	[1] = {
-		.name		= "pclk",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	}
-};
-
-
-static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clocks	     = anubis_serial_clocks,
-		.clocks_size = ARRAY_SIZE(anubis_serial_clocks),
-	},
-	[1] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clocks	     = anubis_serial_clocks,
-		.clocks_size = ARRAY_SIZE(anubis_serial_clocks),
-	},
-};
-
-/* NAND Flash on Anubis board */
-
-static int external_map[]   = { 2 };
-static int chip0_map[]      = { 0 };
-static int chip1_map[]      = { 1 };
-
-static struct mtd_partition anubis_default_nand_part[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= SZ_16K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "/boot",
-		.size	= SZ_4M - SZ_16K,
-		.offset	= SZ_16K,
-	},
-	[2] = {
-		.name	= "user1",
-		.offset	= SZ_4M,
-		.size	= SZ_32M - SZ_4M,
-	},
-	[3] = {
-		.name	= "user2",
-		.offset	= SZ_32M,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-/* the Anubis has 3 selectable slots for nand-flash, the two
- * on-board chip areas, as well as the external slot.
- *
- * Note, there is no current hot-plug support for the External
- * socket.
-*/
-
-static struct s3c2410_nand_set anubis_nand_sets[] = {
-	[1] = {
-		.name		= "External",
-		.nr_chips	= 1,
-		.nr_map		= external_map,
-		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
-		.partitions	= anubis_default_nand_part,
-	},
-	[0] = {
-		.name		= "chip0",
-		.nr_chips	= 1,
-		.nr_map		= chip0_map,
-		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
-		.partitions	= anubis_default_nand_part,
-	},
-	[2] = {
-		.name		= "chip1",
-		.nr_chips	= 1,
-		.nr_map		= chip1_map,
-		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
-		.partitions	= anubis_default_nand_part,
-	},
-};
-
-static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
-{
-	unsigned int tmp;
-
-	slot = set->nr_map[slot] & 3;
-
-	pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n",
-		 slot, set, set->nr_map);
-
-	tmp = __raw_readb(ANUBIS_VA_CTRL1);
-	tmp &= ~ANUBIS_CTRL1_NANDSEL;
-	tmp |= slot;
-
-	pr_debug("anubis_nand: ctrl1 now %02x\n", tmp);
-
-	__raw_writeb(tmp, ANUBIS_VA_CTRL1);
-}
-
-static struct s3c2410_platform_nand anubis_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 55,
-	.twrph1		= 40,
-	.nr_sets	= ARRAY_SIZE(anubis_nand_sets),
-	.sets		= anubis_nand_sets,
-	.select_chip	= anubis_nand_select,
-};
-
-/* IDE channels */
-
-static struct resource anubis_ide0_resource[] = {
-	{
-		.start	= S3C2410_CS3,
-		.end	= S3C2410_CS3 + (8*32) - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= S3C2410_CS3 + (1<<26),
-		.end	= S3C2410_CS3 + (1<<26) + (8*32) - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_IDE0,
-		.end	= IRQ_IDE0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device anubis_device_ide0 = {
-	.name		= "simtec-ide",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(anubis_ide0_resource),
-	.resource	= anubis_ide0_resource,
-};
-
-static struct resource anubis_ide1_resource[] = {
-	{
-		.start	= S3C2410_CS4,
-		.end	= S3C2410_CS4 + (8*32) - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= S3C2410_CS4 + (1<<26),
-		.end	= S3C2410_CS4 + (1<<26) + (8*32) - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_IDE0,
-		.end	= IRQ_IDE0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-
-static struct platform_device anubis_device_ide1 = {
-	.name		= "simtec-ide",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(anubis_ide1_resource),
-	.resource	= anubis_ide1_resource,
-};
-
-/* Standard Anubis devices */
-
-static struct platform_device *anubis_devices[] __initdata = {
-	&s3c_device_usb,
-	&s3c_device_wdt,
-	&s3c_device_adc,
-	&s3c_device_i2c,
- 	&s3c_device_rtc,
-	&s3c_device_nand,
-	&anubis_device_ide0,
-	&anubis_device_ide1,
-};
-
-static struct clk *anubis_clocks[] = {
-	&s3c24xx_dclk0,
-	&s3c24xx_dclk1,
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-	&s3c24xx_uclk,
-};
-
-static struct s3c24xx_board anubis_board __initdata = {
-	.devices       = anubis_devices,
-	.devices_count = ARRAY_SIZE(anubis_devices),
-	.clocks	       = anubis_clocks,
-	.clocks_count  = ARRAY_SIZE(anubis_clocks),
-};
-
-static void __init anubis_map_io(void)
-{
-	/* initialise the clocks */
-
-	s3c24xx_dclk0.parent = NULL;
-	s3c24xx_dclk0.rate   = 12*1000*1000;
-
-	s3c24xx_dclk1.parent = NULL;
-	s3c24xx_dclk1.rate   = 24*1000*1000;
-
-	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
-	s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
-
-	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
-
-	s3c_device_nand.dev.platform_data = &anubis_nand_info;
-
-	s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
-	s3c24xx_init_clocks(0);
-	s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
-	s3c24xx_set_board(&anubis_board);
-
-	/* ensure that the GPIO is setup */
-	s3c2410_gpio_setpin(S3C2410_GPA0, 1);
-}
-
-MACHINE_START(ANUBIS, "Simtec-Anubis")
-	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
-	.map_io		= anubis_map_io,
-	.init_irq	= s3c24xx_init_irq,
-	.timer		= &s3c24xx_timer,
-MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index b8b7675..7b81296 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -50,9 +50,9 @@
 
 #include <linux/serial_8250.h>
 
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
 #include "usb-simtec.h"
 
 #define COPYRIGHT ", (c) 2004-2005 Simtec Electronics"
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 15b625e..5af26e1 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -38,10 +38,10 @@
 #include <asm/arch/h1940-latch.h>
 #include <asm/arch/fb.h>
 
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
-#include "pm.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
 
 static struct map_desc h1940_iodesc[] __initdata = {
 	[0] = {
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 0411e9a..dbac731 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -38,10 +38,10 @@
 #include <asm/arch/regs-gpio.h>
 #include <asm/arch/iic.h>
 
-#include "s3c2410.h"
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
 
 static struct map_desc n30_iodesc[] __initdata = {
 	/* nothing here yet */
diff --git a/arch/arm/mach-s3c2410/mach-nexcoder.c b/arch/arm/mach-s3c2410/mach-nexcoder.c
deleted file mode 100644
index d6dfdad..0000000
--- a/arch/arm/mach-s3c2410/mach-nexcoder.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/mach-nexcoder.c
- *
- * Copyright (c) 2004 Nex Vision
- *   Guillaume GOURAT <guillaume.gourat@nexvision.tv>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Modifications:
- *     15-10-2004 GG  Created initial version
- *     12-03-2005 BJD Updated for release
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/map.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/setup.h>
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-//#include <asm/debug-ll.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-serial.h>
-
-#include "s3c2410.h"
-#include "s3c2440.h"
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
-
-static struct map_desc nexcoder_iodesc[] __initdata = {
-	/* nothing here yet */
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG12 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg nexcoder_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-/* NOR Flash on NexVision NexCoder 2440 board */
-
-static struct resource nexcoder_nor_resource[] = {
-	[0] = {
-		.start = S3C2410_CS0,
-		.end   = S3C2410_CS0 + (8*1024*1024) - 1,
-		.flags = IORESOURCE_MEM,
-	}
-};
-
-static struct map_info nexcoder_nor_map = {
-	.bankwidth = 2,
-};
-
-static struct platform_device nexcoder_device_nor = {
-	.name		= "mtd-flash",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(nexcoder_nor_resource),
-	.resource	= nexcoder_nor_resource,
-	.dev =
-	{
-		.platform_data = &nexcoder_nor_map,
-	}
-};
-
-/* Standard Nexcoder devices */
-
-static struct platform_device *nexcoder_devices[] __initdata = {
-	&s3c_device_usb,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c,
-	&s3c_device_iis,
- 	&s3c_device_rtc,
-	&s3c_device_camif,
-	&s3c_device_spi0,
-	&s3c_device_spi1,
-	&nexcoder_device_nor,
-};
-
-static struct s3c24xx_board nexcoder_board __initdata = {
-	.devices       = nexcoder_devices,
-	.devices_count = ARRAY_SIZE(nexcoder_devices),
-};
-
-
-static void __init nexcoder_sensorboard_init(void)
-{
-	// Initialize SCCB bus
-	s3c2410_gpio_setpin(S3C2410_GPE14, 1); // IICSCL
-	s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_OUTP);
-	s3c2410_gpio_setpin(S3C2410_GPE15, 1); // IICSDA
-	s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_OUTP);
-
-	// Power up the sensor board
-	s3c2410_gpio_setpin(S3C2410_GPF1, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPF1, S3C2410_GPF1_OUTP); // CAM_GPIO7 => nLDO_PWRDN
-	s3c2410_gpio_setpin(S3C2410_GPF2, 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP); // CAM_GPIO6 => CAM_PWRDN
-}
-
-static void __init nexcoder_map_io(void)
-{
-	s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
-	s3c24xx_init_clocks(0);
-	s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
-	s3c24xx_set_board(&nexcoder_board);
-	nexcoder_sensorboard_init();
-}
-
-
-MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
-	/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
-	.map_io		= nexcoder_map_io,
-	.init_irq	= s3c24xx_init_irq,
-	.timer		= &s3c24xx_timer,
-MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-osiris.c b/arch/arm/mach-s3c2410/mach-osiris.c
deleted file mode 100644
index 37b4085..0000000
--- a/arch/arm/mach-s3c2410/mach-osiris.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/mach-osiris.c
- *
- * Copyright (c) 2005 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/arch/osiris-map.h>
-#include <asm/arch/osiris-cpld.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/nand.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
-
-/* onboard perihpheral map */
-
-static struct map_desc osiris_iodesc[] __initdata = {
-  /* ISA IO areas (may be over-written later) */
-
-  {
-	  .virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-	  .pfn		= __phys_to_pfn(S3C2410_CS5),
-	  .length	= SZ_16M,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)S3C24XX_VA_ISA_WORD,
-	  .pfn		= __phys_to_pfn(S3C2410_CS5),
-	  .length	= SZ_16M,
-	  .type		= MT_DEVICE,
-  },
-
-  /* CPLD control registers */
-
-  {
-	  .virtual	= (u32)OSIRIS_VA_CTRL1,
-	  .pfn		= __phys_to_pfn(OSIRIS_PA_CTRL1),
-	  .length	= SZ_16K,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)OSIRIS_VA_CTRL2,
-	  .pfn		= __phys_to_pfn(OSIRIS_PA_CTRL2),
-	  .length	= SZ_16K,
-	  .type		= MT_DEVICE,
-  },
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c24xx_uart_clksrc osiris_serial_clocks[] = {
-	[0] = {
-		.name		= "uclk",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	},
-	[1] = {
-		.name		= "pclk",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	}
-};
-
-static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clocks	     = osiris_serial_clocks,
-		.clocks_size = ARRAY_SIZE(osiris_serial_clocks),
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clocks	     = osiris_serial_clocks,
-		.clocks_size = ARRAY_SIZE(osiris_serial_clocks),
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clocks	     = osiris_serial_clocks,
-		.clocks_size = ARRAY_SIZE(osiris_serial_clocks),
-	}
-};
-
-/* NAND Flash on Osiris board */
-
-static int external_map[]   = { 2 };
-static int chip0_map[]      = { 0 };
-static int chip1_map[]      = { 1 };
-
-static struct mtd_partition osiris_default_nand_part[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= SZ_16K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "/boot",
-		.size	= SZ_4M - SZ_16K,
-		.offset	= SZ_16K,
-	},
-	[2] = {
-		.name	= "user1",
-		.offset	= SZ_4M,
-		.size	= SZ_32M - SZ_4M,
-	},
-	[3] = {
-		.name	= "user2",
-		.offset	= SZ_32M,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-/* the Osiris has 3 selectable slots for nand-flash, the two
- * on-board chip areas, as well as the external slot.
- *
- * Note, there is no current hot-plug support for the External
- * socket.
-*/
-
-static struct s3c2410_nand_set osiris_nand_sets[] = {
-	[1] = {
-		.name		= "External",
-		.nr_chips	= 1,
-		.nr_map		= external_map,
-		.nr_partitions	= ARRAY_SIZE(osiris_default_nand_part),
-		.partitions	= osiris_default_nand_part,
-	},
-	[0] = {
-		.name		= "chip0",
-		.nr_chips	= 1,
-		.nr_map		= chip0_map,
-		.nr_partitions	= ARRAY_SIZE(osiris_default_nand_part),
-		.partitions	= osiris_default_nand_part,
-	},
-	[2] = {
-		.name		= "chip1",
-		.nr_chips	= 1,
-		.nr_map		= chip1_map,
-		.nr_partitions	= ARRAY_SIZE(osiris_default_nand_part),
-		.partitions	= osiris_default_nand_part,
-	},
-};
-
-static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
-{
-	unsigned int tmp;
-
-	slot = set->nr_map[slot] & 3;
-
-	pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n",
-		 slot, set, set->nr_map);
-
-	tmp = __raw_readb(OSIRIS_VA_CTRL1);
-	tmp &= ~OSIRIS_CTRL1_NANDSEL;
-	tmp |= slot;
-
-	pr_debug("osiris_nand: ctrl1 now %02x\n", tmp);
-
-	__raw_writeb(tmp, OSIRIS_VA_CTRL1);
-}
-
-static struct s3c2410_platform_nand osiris_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 60,
-	.twrph1		= 60,
-	.nr_sets	= ARRAY_SIZE(osiris_nand_sets),
-	.sets		= osiris_nand_sets,
-	.select_chip	= osiris_nand_select,
-};
-
-/* PCMCIA control and configuration */
-
-static struct resource osiris_pcmcia_resource[] = {
-	[0] = {
-		.start	= 0x0f000000,
-		.end	= 0x0f100000,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0x0c000000,
-		.end	= 0x0c100000,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device osiris_pcmcia = {
-	.name		= "osiris-pcmcia",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(osiris_pcmcia_resource),
-	.resource	= osiris_pcmcia_resource,
-};
-
-/* Standard Osiris devices */
-
-static struct platform_device *osiris_devices[] __initdata = {
-	&s3c_device_i2c,
-	&s3c_device_nand,
-	&osiris_pcmcia,
-};
-
-static struct clk *osiris_clocks[] = {
-	&s3c24xx_dclk0,
-	&s3c24xx_dclk1,
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-	&s3c24xx_uclk,
-};
-
-static struct s3c24xx_board osiris_board __initdata = {
-	.devices       = osiris_devices,
-	.devices_count = ARRAY_SIZE(osiris_devices),
-	.clocks	       = osiris_clocks,
-	.clocks_count  = ARRAY_SIZE(osiris_clocks),
-};
-
-static void __init osiris_map_io(void)
-{
-	unsigned long flags;
-
-	/* initialise the clocks */
-
-	s3c24xx_dclk0.parent = NULL;
-	s3c24xx_dclk0.rate   = 12*1000*1000;
-
-	s3c24xx_dclk1.parent = NULL;
-	s3c24xx_dclk1.rate   = 24*1000*1000;
-
-	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
-	s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
-
-	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
-
-	s3c_device_nand.dev.platform_data = &osiris_nand_info;
-
-	s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
-	s3c24xx_init_clocks(0);
-	s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
-	s3c24xx_set_board(&osiris_board);
-
-	/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
-
-	local_irq_save(flags);
-	__raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON);
-	local_irq_restore(flags);
-
-	/* write-protect line to the NAND */
-	s3c2410_gpio_setpin(S3C2410_GPA0, 1);
-}
-
-MACHINE_START(OSIRIS, "Simtec-OSIRIS")
-	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
-	.map_io		= osiris_map_io,
-	.init_irq	= s3c24xx_init_irq,
-	.timer		= &s3c24xx_timer,
-MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index 2c738b3..c78ab75 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -32,10 +32,10 @@
 #include <asm/arch/regs-serial.h>
 #include <asm/arch/regs-gpio.h>
 
-#include "s3c2410.h"
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
 
 static struct map_desc otom11_iodesc[] __initdata = {
   /* Device area */
diff --git a/arch/arm/mach-s3c2410/mach-rx3715.c b/arch/arm/mach-s3c2410/mach-rx3715.c
deleted file mode 100644
index ecbcdf7..0000000
--- a/arch/arm/mach-s3c2410/mach-rx3715.c
+++ /dev/null
@@ -1,244 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/mach-rx3715.c
- *
- * Copyright (c) 2003,2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * http://www.handhelds.org/projects/rx3715.html
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/hardware.h>
-#include <asm/hardware/iomd.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
-
-#include <asm/arch/h1940.h>
-#include <asm/arch/nand.h>
-#include <asm/arch/fb.h>
-
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
-#include "pm.h"
-
-static struct map_desc rx3715_iodesc[] __initdata = {
-	/* dump ISA space somewhere unused */
-
-	{
-		.virtual	= (u32)S3C24XX_VA_ISA_WORD,
-		.pfn		= __phys_to_pfn(S3C2410_CS3),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-		.pfn		= __phys_to_pfn(S3C2410_CS3),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE,
-	},
-};
-
-
-static struct s3c24xx_uart_clksrc rx3715_serial_clocks[] = {
-	[0] = {
-		.name		= "fclk",
-		.divisor	= 0,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	}
-};
-
-static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-		.clocks	     = rx3715_serial_clocks,
-		.clocks_size = ARRAY_SIZE(rx3715_serial_clocks),
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x00,
-		.clocks	     = rx3715_serial_clocks,
-		.clocks_size = ARRAY_SIZE(rx3715_serial_clocks),
-	},
-	/* IR port */
-	[2] = {
-		.hwport	     = 2,
-		.uart_flags  = UPF_CONS_FLOW,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x43,
-		.ufcon	     = 0x51,
-		.clocks	     = rx3715_serial_clocks,
-		.clocks_size = ARRAY_SIZE(rx3715_serial_clocks),
-	}
-};
-
-/* framebuffer lcd controller information */
-
-static struct s3c2410fb_mach_info rx3715_lcdcfg __initdata = {
-	.regs	= {
-		.lcdcon1 =	S3C2410_LCDCON1_TFT16BPP | \
-				S3C2410_LCDCON1_TFT | \
-				S3C2410_LCDCON1_CLKVAL(0x0C),
-
-		.lcdcon2 =	S3C2410_LCDCON2_VBPD(5) | \
-				S3C2410_LCDCON2_LINEVAL(319) | \
-				S3C2410_LCDCON2_VFPD(6) | \
-				S3C2410_LCDCON2_VSPW(2),
-
-		.lcdcon3 =	S3C2410_LCDCON3_HBPD(35) | \
-				S3C2410_LCDCON3_HOZVAL(239) | \
-				S3C2410_LCDCON3_HFPD(35),
-
-		.lcdcon4 =	S3C2410_LCDCON4_MVAL(0) | \
-				S3C2410_LCDCON4_HSPW(7),
-
-		.lcdcon5 =	S3C2410_LCDCON5_INVVLINE |
-				S3C2410_LCDCON5_FRM565 |
-				S3C2410_LCDCON5_HWSWP,
-	},
-
-	.lpcsel =	0xf82,
-
-	.gpccon =	0xaa955699,
-	.gpccon_mask =	0xffc003cc,
-	.gpcup =	0x0000ffff,
-	.gpcup_mask =	0xffffffff,
-
-	.gpdcon =	0xaa95aaa1,
-	.gpdcon_mask =	0xffc0fff0,
-	.gpdup =	0x0000faff,
-	.gpdup_mask =	0xffffffff,
-
-	.fixed_syncs =	1,
-	.width  =	240,
-	.height =	320,
-
-	.xres	= {
-		.min =		240,
-		.max =		240,
-		.defval =	240,
-	},
-
-	.yres	= {
-		.max =		320,
-		.min =		320,
-		.defval	=	320,
-	},
-
-	.bpp	= {
-		.min =		16,
-		.max =		16,
-		.defval =	16,
-	},
-};
-
-static struct mtd_partition rx3715_nand_part[] = {
-	[0] = {
-		.name		= "Whole Flash",
-		.offset		= 0,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= MTD_WRITEABLE,
-	}
-};
-
-static struct s3c2410_nand_set rx3715_nand_sets[] = {
-	[0] = {
-		.name		= "Internal",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(rx3715_nand_part),
-		.partitions	= rx3715_nand_part,
-	},
-};
-
-static struct s3c2410_platform_nand rx3715_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 50,
-	.twrph1		= 15,
-	.nr_sets	= ARRAY_SIZE(rx3715_nand_sets),
-	.sets		= rx3715_nand_sets,
-};
-
-static struct platform_device *rx3715_devices[] __initdata = {
-	&s3c_device_usb,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c,
-	&s3c_device_iis,
-	&s3c_device_nand,
-};
-
-static struct s3c24xx_board rx3715_board __initdata = {
-	.devices       = rx3715_devices,
-	.devices_count = ARRAY_SIZE(rx3715_devices)
-};
-
-static void __init rx3715_map_io(void)
-{
-	s3c_device_nand.dev.platform_data = &rx3715_nand_info;
-
-	s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
-	s3c24xx_init_clocks(16934000);
-	s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
-	s3c24xx_set_board(&rx3715_board);
-}
-
-static void __init rx3715_init_irq(void)
-{
-	s3c24xx_init_irq();
-}
-
-static void __init rx3715_init_machine(void)
-{
-	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
-	s3c2410_pm_init();
-
-	s3c24xx_fb_set_platdata(&rx3715_lcdcfg);
-}
-
-
-MACHINE_START(RX3715, "IPAQ-RX3715")
-	/* Maintainer: Ben Dooks <ben@fluff.org> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
-	.map_io		= rx3715_map_io,
-	.init_irq	= rx3715_init_irq,
-	.init_machine	= rx3715_init_machine,
-	.timer		= &s3c24xx_timer,
-MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index 01c0c98..57b8a80 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -1,4 +1,4 @@
-/***********************************************************************
+/* linux/arch/arm/mach-s3c2410/mach-smdk2410.c
  *
  * linux/arch/arm/mach-s3c2410/mach-smdk2410.c
  *
@@ -49,10 +49,10 @@
 
 #include <asm/arch/regs-serial.h>
 
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
 
-#include "common-smdk.h"
+#include <asm/plat-s3c24xx/common-smdk.h>
 
 static struct map_desc smdk2410_iodesc[] __initdata = {
   /* nothing here yet */
diff --git a/arch/arm/mach-s3c2410/mach-smdk2413.c b/arch/arm/mach-s3c2410/mach-smdk2413.c
deleted file mode 100644
index 4f89abd7..0000000
--- a/arch/arm/mach-s3c2410/mach-smdk2413.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/mach-smdk2413.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Thanks to Dimity Andric (TomTom) and Steven Ryu (Samsung) for the
- * loans of SMDK2413 to work with.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/hardware.h>
-#include <asm/hardware/iomd.h>
-#include <asm/setup.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-//#include <asm/debug-ll.h>
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
-
-#include <asm/arch/idle.h>
-#include <asm/arch/fb.h>
-
-#include "s3c2410.h"
-#include "s3c2412.h"
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
-
-#include "common-smdk.h"
-
-static struct map_desc smdk2413_iodesc[] __initdata = {
-};
-
-static struct s3c2410_uartcfg smdk2413_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	/* IR port */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x43,
-		.ufcon	     = 0x51,
-	}
-};
-
-static struct platform_device *smdk2413_devices[] __initdata = {
-	&s3c_device_usb,
-	//&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c,
-	&s3c_device_iis,
-};
-
-static struct s3c24xx_board smdk2413_board __initdata = {
-	.devices       = smdk2413_devices,
-	.devices_count = ARRAY_SIZE(smdk2413_devices)
-};
-
-static void __init smdk2413_fixup(struct machine_desc *desc,
-				  struct tag *tags, char **cmdline,
-				  struct meminfo *mi)
-{
-	if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) {
-		mi->nr_banks=1;
-		mi->bank[0].start = 0x30000000;
-		mi->bank[0].size = SZ_64M;
-		mi->bank[0].node = 0;
-	}
-}
-
-static void __init smdk2413_map_io(void)
-{
-	s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
-	s3c24xx_set_board(&smdk2413_board);
-}
-
-static void __init smdk2413_machine_init(void)
-{
-	smdk_machine_init();
-}
-
-MACHINE_START(S3C2413, "S3C2413")
-	/* Maintainer: Ben Dooks <ben@fluff.org> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
-
-	.fixup		= smdk2413_fixup,
-	.init_irq	= s3c24xx_init_irq,
-	.map_io		= smdk2413_map_io,
-	.init_machine	= smdk2413_machine_init,
-	.timer		= &s3c24xx_timer,
-MACHINE_END
-
-MACHINE_START(SMDK2413, "SMDK2413")
-	/* Maintainer: Ben Dooks <ben@fluff.org> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
-
-	.fixup		= smdk2413_fixup,
-	.init_irq	= s3c24xx_init_irq,
-	.map_io		= smdk2413_map_io,
-	.init_machine	= smdk2413_machine_init,
-	.timer		= &s3c24xx_timer,
-MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c
deleted file mode 100644
index 2b61f4e..0000000
--- a/arch/arm/mach-s3c2410/mach-smdk2440.c
+++ /dev/null
@@ -1,208 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/mach-smdk2440.c
- *
- * Copyright (c) 2004,2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * http://www.fluff.org/ben/smdk2440/
- *
- * Thanks to Dimity Andric and TomTom for the loan of an SMDK2440.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/hardware.h>
-#include <asm/hardware/iomd.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-//#include <asm/debug-ll.h>
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
-
-#include <asm/arch/idle.h>
-#include <asm/arch/fb.h>
-
-#include "s3c2410.h"
-#include "s3c2440.h"
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
-
-#include "common-smdk.h"
-
-static struct map_desc smdk2440_iodesc[] __initdata = {
-	/* ISA IO Space map (memory space selected by A24) */
-
-	{
-		.virtual	= (u32)S3C24XX_VA_ISA_WORD,
-		.pfn		= __phys_to_pfn(S3C2410_CS2),
-		.length		= 0x10000,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (u32)S3C24XX_VA_ISA_WORD + 0x10000,
-		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
-		.length		= SZ_4M,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-		.pfn		= __phys_to_pfn(S3C2410_CS2),
-		.length		= 0x10000,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
-		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
-		.length		= SZ_4M,
-		.type		= MT_DEVICE,
-	}
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk2440_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	/* IR port */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x43,
-		.ufcon	     = 0x51,
-	}
-};
-
-/* LCD driver info */
-
-static struct s3c2410fb_mach_info smdk2440_lcd_cfg __initdata = {
-	.regs	= {
-
-		.lcdcon1	= S3C2410_LCDCON1_TFT16BPP |
-				  S3C2410_LCDCON1_TFT |
-				  S3C2410_LCDCON1_CLKVAL(0x04),
-
-		.lcdcon2	= S3C2410_LCDCON2_VBPD(7) |
-				  S3C2410_LCDCON2_LINEVAL(319) |
-				  S3C2410_LCDCON2_VFPD(6) |
-				  S3C2410_LCDCON2_VSPW(3),
-
-		.lcdcon3	= S3C2410_LCDCON3_HBPD(19) |
-				  S3C2410_LCDCON3_HOZVAL(239) |
-				  S3C2410_LCDCON3_HFPD(7),
-
-		.lcdcon4	= S3C2410_LCDCON4_MVAL(0) |
-				  S3C2410_LCDCON4_HSPW(3),
-
-		.lcdcon5	= S3C2410_LCDCON5_FRM565 |
-				  S3C2410_LCDCON5_INVVLINE |
-				  S3C2410_LCDCON5_INVVFRAME |
-				  S3C2410_LCDCON5_PWREN |
-				  S3C2410_LCDCON5_HWSWP,
-	},
-
-#if 0
-	/* currently setup by downloader */
-	.gpccon		= 0xaa940659,
-	.gpccon_mask	= 0xffffffff,
-	.gpcup		= 0x0000ffff,
-	.gpcup_mask	= 0xffffffff,
-	.gpdcon		= 0xaa84aaa0,
-	.gpdcon_mask	= 0xffffffff,
-	.gpdup		= 0x0000faff,
-	.gpdup_mask	= 0xffffffff,
-#endif
-
-	.lpcsel		= ((0xCE6) & ~7) | 1<<4,
-
-	.width		= 240,
-	.height		= 320,
-
-	.xres		= {
-		.min	= 240,
-		.max	= 240,
-		.defval	= 240,
-	},
-
-	.yres		= {
-		.min	= 320,
-		.max	= 320,
-		.defval = 320,
-	},
-
-	.bpp		= {
-		.min	= 16,
-		.max	= 16,
-		.defval = 16,
-	},
-};
-
-static struct platform_device *smdk2440_devices[] __initdata = {
-	&s3c_device_usb,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c,
-	&s3c_device_iis,
-};
-
-static struct s3c24xx_board smdk2440_board __initdata = {
-	.devices       = smdk2440_devices,
-	.devices_count = ARRAY_SIZE(smdk2440_devices)
-};
-
-static void __init smdk2440_map_io(void)
-{
-	s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
-	s3c24xx_init_clocks(16934400);
-	s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
-	s3c24xx_set_board(&smdk2440_board);
-}
-
-static void __init smdk2440_machine_init(void)
-{
-	s3c24xx_fb_set_platdata(&smdk2440_lcd_cfg);
-
-	smdk_machine_init();
-}
-
-MACHINE_START(S3C2440, "SMDK2440")
-	/* Maintainer: Ben Dooks <ben@fluff.org> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
-
-	.init_irq	= s3c24xx_init_irq,
-	.map_io		= smdk2440_map_io,
-	.init_machine	= smdk2440_machine_init,
-	.timer		= &s3c24xx_timer,
-MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index a382fc0..c947c75 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -43,9 +43,9 @@
 #include <asm/arch/regs-gpio.h>
 #include <asm/arch/leds-gpio.h>
 
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
 #include "usb-simtec.h"
 
 /* macros for virtual address mods for the io space entries */
diff --git a/arch/arm/mach-s3c2410/mach-vstms.c b/arch/arm/mach-s3c2410/mach-vstms.c
deleted file mode 100644
index 0360e10..0000000
--- a/arch/arm/mach-s3c2410/mach-vstms.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/mach-vstms.c
- *
- * (C) 2006 Thomas Gleixner <tglx@linutronix.de>
- *
- * Derived from mach-smdk2413.c - (C) 2006 Simtec Electronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/hardware.h>
-#include <asm/hardware/iomd.h>
-#include <asm/setup.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
-
-#include <asm/arch/idle.h>
-#include <asm/arch/fb.h>
-
-#include <asm/arch/nand.h>
-
-#include "s3c2410.h"
-#include "s3c2412.h"
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
-
-
-static struct map_desc vstms_iodesc[] __initdata = {
-};
-
-static struct s3c2410_uartcfg vstms_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	}
-};
-
-static struct mtd_partition vstms_nand_part[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= 0x7C000,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "UBoot Config",
-		.offset = 0x7C000,
-		.size	= 0x4000,
-	},
-	[2] = {
-		.name	= "Kernel",
-		.offset = 0x80000,
-		.size	= 0x200000,
-	},
-	[3] = {
-		.name	= "RFS",
-		.offset	= 0x280000,
-		.size	= 0x3d80000,
-	},
-};
-
-static struct s3c2410_nand_set vstms_nand_sets[] = {
-	[0] = {
-		.name		= "NAND",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(vstms_nand_part),
-		.partitions	= vstms_nand_part,
-	},
-};
-
-/* choose a set of timings which should suit most 512Mbit
- * chips and beyond.
-*/
-
-static struct s3c2410_platform_nand vstms_nand_info = {
-	.tacls		= 20,
-	.twrph0		= 60,
-	.twrph1		= 20,
-	.nr_sets	= ARRAY_SIZE(vstms_nand_sets),
-	.sets		= vstms_nand_sets,
-};
-
-static struct platform_device *vstms_devices[] __initdata = {
-	&s3c_device_usb,
-	&s3c_device_wdt,
-	&s3c_device_i2c,
-	&s3c_device_iis,
-	&s3c_device_rtc,
-	&s3c_device_nand,
-};
-
-static struct s3c24xx_board vstms_board __initdata = {
-	.devices       = vstms_devices,
-	.devices_count = ARRAY_SIZE(vstms_devices)
-};
-
-static void __init vstms_fixup(struct machine_desc *desc,
-				  struct tag *tags, char **cmdline,
-				  struct meminfo *mi)
-{
-	if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) {
-		mi->nr_banks=1;
-		mi->bank[0].start = 0x30000000;
-		mi->bank[0].size = SZ_64M;
-		mi->bank[0].node = 0;
-	}
-}
-
-static void __init vstms_map_io(void)
-{
-	s3c_device_nand.dev.platform_data = &vstms_nand_info;
-
-	s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
-	s3c24xx_set_board(&vstms_board);
-}
-
-MACHINE_START(VSTMS, "VSTMS")
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
-
-	.fixup		= vstms_fixup,
-	.init_irq	= s3c24xx_init_irq,
-	.map_io		= vstms_map_io,
-	.timer		= &s3c24xx_timer,
-MACHINE_END
diff --git a/arch/arm/mach-s3c2410/pm-simtec.c b/arch/arm/mach-s3c2410/pm-simtec.c
deleted file mode 100644
index 619133e..0000000
--- a/arch/arm/mach-s3c2410/pm-simtec.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/pm-simtec.c
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * http://armlinux.simtec.co.uk/
- *
- * Power Management helpers for Simtec S3C24XX implementations
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-
-#include <asm/arch/map.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-
-#include <asm/mach-types.h>
-
-#include "pm.h"
-
-#define COPYRIGHT ", (c) 2005 Simtec Electronics"
-
-/* pm_simtec_init
- *
- * enable the power management functions
-*/
-
-static __init int pm_simtec_init(void)
-{
-	unsigned long gstatus4;
-
-	/* check which machine we are running on */
-
-	if (!machine_is_bast() && !machine_is_vr1000() &&
-	    !machine_is_anubis() && !machine_is_osiris() &&
-	    !machine_is_aml_m5900())
-		return 0;
-
-	printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n");
-
-	gstatus4  = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30;
-	gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28;
-	gstatus4 |= (__raw_readl(S3C2410_BANKSIZE) & S3C2410_BANKSIZE_MASK);
-
-	__raw_writel(gstatus4, S3C2410_GSTATUS4);
-
-	return s3c2410_pm_init();
-}
-
-arch_initcall(pm_simtec_init);
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index ebf294d..3b3a7db 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -1,11 +1,9 @@
 /* linux/arch/arm/mach-s3c2410/pm.c
  *
- * Copyright (c) 2004,2006 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C24XX Power Manager (Suspend-To-RAM) support
- *
- * See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information
+ * S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -20,640 +18,139 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * Parts based on arch/arm/mach-pxa/pm.c
- *
- * Thanks to Dimitry Andric for debugging
 */
 
 #include <linux/init.h>
 #include <linux/suspend.h>
 #include <linux/errno.h>
 #include <linux/time.h>
-#include <linux/interrupt.h>
-#include <linux/crc32.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
+#include <linux/sysdev.h>
 
-#include <asm/cacheflush.h>
 #include <asm/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-irq.h>
-
-#include <asm/mach/time.h>
-
-#include "pm.h"
-
-/* for external use */
-
-unsigned long s3c_pm_flags;
-
-#define PFX "s3c24xx-pm: "
-
-static struct sleep_save core_save[] = {
-	SAVE_ITEM(S3C2410_LOCKTIME),
-	SAVE_ITEM(S3C2410_CLKCON),
-
-	/* we restore the timings here, with the proviso that the board
-	 * brings the system up in an slower, or equal frequency setting
-	 * to the original system.
-	 *
-	 * if we cannot guarantee this, then things are going to go very
-	 * wrong here, as we modify the refresh and both pll settings.
-	 */
-
-	SAVE_ITEM(S3C2410_BWSCON),
-	SAVE_ITEM(S3C2410_BANKCON0),
-	SAVE_ITEM(S3C2410_BANKCON1),
-	SAVE_ITEM(S3C2410_BANKCON2),
-	SAVE_ITEM(S3C2410_BANKCON3),
-	SAVE_ITEM(S3C2410_BANKCON4),
-	SAVE_ITEM(S3C2410_BANKCON5),
-
-	SAVE_ITEM(S3C2410_CLKDIVN),
-	SAVE_ITEM(S3C2410_MPLLCON),
-	SAVE_ITEM(S3C2410_UPLLCON),
-	SAVE_ITEM(S3C2410_CLKSLOW),
-	SAVE_ITEM(S3C2410_REFRESH),
-};
-
-static struct sleep_save gpio_save[] = {
-	SAVE_ITEM(S3C2410_GPACON),
-	SAVE_ITEM(S3C2410_GPADAT),
-
-	SAVE_ITEM(S3C2410_GPBCON),
-	SAVE_ITEM(S3C2410_GPBDAT),
-	SAVE_ITEM(S3C2410_GPBUP),
-
-	SAVE_ITEM(S3C2410_GPCCON),
-	SAVE_ITEM(S3C2410_GPCDAT),
-	SAVE_ITEM(S3C2410_GPCUP),
-
-	SAVE_ITEM(S3C2410_GPDCON),
-	SAVE_ITEM(S3C2410_GPDDAT),
-	SAVE_ITEM(S3C2410_GPDUP),
-
-	SAVE_ITEM(S3C2410_GPECON),
-	SAVE_ITEM(S3C2410_GPEDAT),
-	SAVE_ITEM(S3C2410_GPEUP),
-
-	SAVE_ITEM(S3C2410_GPFCON),
-	SAVE_ITEM(S3C2410_GPFDAT),
-	SAVE_ITEM(S3C2410_GPFUP),
+#include <asm/mach-types.h>
 
-	SAVE_ITEM(S3C2410_GPGCON),
-	SAVE_ITEM(S3C2410_GPGDAT),
-	SAVE_ITEM(S3C2410_GPGUP),
-
-	SAVE_ITEM(S3C2410_GPHCON),
-	SAVE_ITEM(S3C2410_GPHDAT),
-	SAVE_ITEM(S3C2410_GPHUP),
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/h1940.h>
 
-	SAVE_ITEM(S3C2410_DCLKCON),
-};
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
 
 #ifdef CONFIG_S3C2410_PM_DEBUG
-
-#define SAVE_UART(va) \
-	SAVE_ITEM((va) + S3C2410_ULCON), \
-	SAVE_ITEM((va) + S3C2410_UCON), \
-	SAVE_ITEM((va) + S3C2410_UFCON), \
-	SAVE_ITEM((va) + S3C2410_UMCON), \
-	SAVE_ITEM((va) + S3C2410_UBRDIV)
-
-static struct sleep_save uart_save[] = {
-	SAVE_UART(S3C24XX_VA_UART0),
-	SAVE_UART(S3C24XX_VA_UART1),
-#ifndef CONFIG_CPU_S3C2400
-	SAVE_UART(S3C24XX_VA_UART2),
-#endif
-};
-
-/* debug
- *
- * we send the debug to printascii() to allow it to be seen if the
- * system never wakes up from the sleep
-*/
-
-extern void printascii(const char *);
-
-void pm_dbg(const char *fmt, ...)
-{
-	va_list va;
-	char buff[256];
-
-	va_start(va, fmt);
-	vsprintf(buff, fmt, va);
-	va_end(va);
-
-	printascii(buff);
-}
-
-static void s3c2410_pm_debug_init(void)
-{
-	unsigned long tmp = __raw_readl(S3C2410_CLKCON);
-
-	/* re-start uart clocks */
-	tmp |= S3C2410_CLKCON_UART0;
-	tmp |= S3C2410_CLKCON_UART1;
-	tmp |= S3C2410_CLKCON_UART2;
-
-	__raw_writel(tmp, S3C2410_CLKCON);
-	udelay(10);
-}
-
+extern void pm_dbg(const char *fmt, ...);
 #define DBG(fmt...) pm_dbg(fmt)
 #else
 #define DBG(fmt...) printk(KERN_DEBUG fmt)
-
-#define s3c2410_pm_debug_init() do { } while(0)
-
-static struct sleep_save uart_save[] = {};
 #endif
 
-#if defined(CONFIG_S3C2410_PM_CHECK) && CONFIG_S3C2410_PM_CHECK_CHUNKSIZE != 0
-
-/* suspend checking code...
- *
- * this next area does a set of crc checks over all the installed
- * memory, so the system can verify if the resume was ok.
- *
- * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
- * increasing it will mean that the area corrupted will be less easy to spot,
- * and reducing the size will cause the CRC save area to grow
-*/
-
-#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024)
-
-static u32 crc_size;	/* size needed for the crc block */
-static u32 *crcs;	/* allocated over suspend/resume */
-
-typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg);
-
-/* s3c2410_pm_run_res
- *
- * go thorugh the given resource list, and look for system ram
-*/
-
-static void s3c2410_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
-{
-	while (ptr != NULL) {
-		if (ptr->child != NULL)
-			s3c2410_pm_run_res(ptr->child, fn, arg);
-
-		if ((ptr->flags & IORESOURCE_MEM) &&
-		    strcmp(ptr->name, "System RAM") == 0) {
-			DBG("Found system RAM at %08lx..%08lx\n",
-			    ptr->start, ptr->end);
-			arg = (fn)(ptr, arg);
-		}
-
-		ptr = ptr->sibling;
-	}
-}
-
-static void s3c2410_pm_run_sysram(run_fn_t fn, u32 *arg)
-{
-	s3c2410_pm_run_res(&iomem_resource, fn, arg);
-}
-
-static u32 *s3c2410_pm_countram(struct resource *res, u32 *val)
-{
-	u32 size = (u32)(res->end - res->start)+1;
-
-	size += CHECK_CHUNKSIZE-1;
-	size /= CHECK_CHUNKSIZE;
-
-	DBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size);
-
-	*val += size * sizeof(u32);
-	return val;
-}
-
-/* s3c2410_pm_prepare_check
- *
- * prepare the necessary information for creating the CRCs. This
- * must be done before the final save, as it will require memory
- * allocating, and thus touching bits of the kernel we do not
- * know about.
-*/
-
-static void s3c2410_pm_check_prepare(void)
+static void s3c2410_pm_prepare(void)
 {
-	crc_size = 0;
+	/* ensure at least GSTATUS3 has the resume address */
 
-	s3c2410_pm_run_sysram(s3c2410_pm_countram, &crc_size);
+	__raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3);
 
-	DBG("s3c2410_pm_prepare_check: %u checks needed\n", crc_size);
+	DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
+	DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
 
-	crcs = kmalloc(crc_size+4, GFP_KERNEL);
-	if (crcs == NULL)
-		printk(KERN_ERR "Cannot allocated CRC save area\n");
-}
+	if (machine_is_h1940()) {
+		void *base = phys_to_virt(H1940_SUSPEND_CHECK);
+		unsigned long ptr;
+		unsigned long calc = 0;
 
-static u32 *s3c2410_pm_makecheck(struct resource *res, u32 *val)
-{
-	unsigned long addr, left;
+		/* generate check for the bootloader to check on resume */
 
-	for (addr = res->start; addr < res->end;
-	     addr += CHECK_CHUNKSIZE) {
-		left = res->end - addr;
+		for (ptr = 0; ptr < 0x40000; ptr += 0x400)
+			calc += __raw_readl(base+ptr);
 
-		if (left > CHECK_CHUNKSIZE)
-			left = CHECK_CHUNKSIZE;
-
-		*val = crc32_le(~0, phys_to_virt(addr), left);
-		val++;
+		__raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
 	}
 
-	return val;
-}
-
-/* s3c2410_pm_check_store
- *
- * compute the CRC values for the memory blocks before the final
- * sleep.
-*/
-
-static void s3c2410_pm_check_store(void)
-{
-	if (crcs != NULL)
-		s3c2410_pm_run_sysram(s3c2410_pm_makecheck, crcs);
-}
-
-/* in_region
- *
- * return TRUE if the area defined by ptr..ptr+size contatins the
- * what..what+whatsz
-*/
-
-static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
-{
-	if ((what+whatsz) < ptr)
-		return 0;
-
-	if (what > (ptr+size))
-		return 0;
-
-	return 1;
-}
-
-static u32 *s3c2410_pm_runcheck(struct resource *res, u32 *val)
-{
-	void *save_at = phys_to_virt(s3c2410_sleep_save_phys);
-	unsigned long addr;
-	unsigned long left;
-	void *ptr;
-	u32 calc;
-
-	for (addr = res->start; addr < res->end;
-	     addr += CHECK_CHUNKSIZE) {
-		left = res->end - addr;
+	/* the RX3715 uses similar code and the same H1940 and the
+	 * same offsets for resume and checksum pointers */
 
-		if (left > CHECK_CHUNKSIZE)
-			left = CHECK_CHUNKSIZE;
+	if (machine_is_rx3715()) {
+		void *base = phys_to_virt(H1940_SUSPEND_CHECK);
+		unsigned long ptr;
+		unsigned long calc = 0;
 
-		ptr = phys_to_virt(addr);
+		/* generate check for the bootloader to check on resume */
 
-		if (in_region(ptr, left, crcs, crc_size)) {
-			DBG("skipping %08lx, has crc block in\n", addr);
-			goto skip_check;
-		}
+		for (ptr = 0; ptr < 0x40000; ptr += 0x4)
+			calc += __raw_readl(base+ptr);
 
-		if (in_region(ptr, left, save_at, 32*4 )) {
-			DBG("skipping %08lx, has save block in\n", addr);
-			goto skip_check;
-		}
-
-		/* calculate and check the checksum */
-
-		calc = crc32_le(~0, ptr, left);
-		if (calc != *val) {
-			printk(KERN_ERR PFX "Restore CRC error at "
-			       "%08lx (%08x vs %08x)\n", addr, calc, *val);
-
-			DBG("Restore CRC error at %08lx (%08x vs %08x)\n",
-			    addr, calc, *val);
-		}
-
-	skip_check:
-		val++;
+		__raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
 	}
 
-	return val;
-}
+	if ( machine_is_aml_m5900() )
+		s3c2410_gpio_setpin(S3C2410_GPF2, 1);
 
-/* s3c2410_pm_check_restore
- *
- * check the CRCs after the restore event and free the memory used
- * to hold them
-*/
-
-static void s3c2410_pm_check_restore(void)
-{
-	if (crcs != NULL) {
-		s3c2410_pm_run_sysram(s3c2410_pm_runcheck, crcs);
-		kfree(crcs);
-		crcs = NULL;
-	}
 }
 
-#else
-
-#define s3c2410_pm_check_prepare() do { } while(0)
-#define s3c2410_pm_check_restore() do { } while(0)
-#define s3c2410_pm_check_store()   do { } while(0)
-#endif
-
-/* helper functions to save and restore register state */
-
-void s3c2410_pm_do_save(struct sleep_save *ptr, int count)
+static int s3c2410_pm_resume(struct sys_device *dev)
 {
-	for (; count > 0; count--, ptr++) {
-		ptr->val = __raw_readl(ptr->reg);
-		DBG("saved %p value %08lx\n", ptr->reg, ptr->val);
-	}
-}
+	unsigned long tmp;
 
-/* s3c2410_pm_do_restore
- *
- * restore the system from the given list of saved registers
- *
- * Note, we do not use DBG() in here, as the system may not have
- * restore the UARTs state yet
-*/
+	/* unset the return-from-sleep flag, to ensure reset */
 
-void s3c2410_pm_do_restore(struct sleep_save *ptr, int count)
-{
-	for (; count > 0; count--, ptr++) {
-		printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n",
-		       ptr->reg, ptr->val, __raw_readl(ptr->reg));
-
-		__raw_writel(ptr->val, ptr->reg);
-	}
-}
+	tmp = __raw_readl(S3C2410_GSTATUS2);
+	tmp &= S3C2410_GSTATUS2_OFFRESET;
+	__raw_writel(tmp, S3C2410_GSTATUS2);
 
-/* s3c2410_pm_do_restore_core
- *
- * similar to s3c2410_pm_do_restore_core
- *
- * WARNING: Do not put any debug in here that may effect memory or use
- * peripherals, as things may be changing!
-*/
+	if ( machine_is_aml_m5900() )
+		s3c2410_gpio_setpin(S3C2410_GPF2, 0);
 
-static void s3c2410_pm_do_restore_core(struct sleep_save *ptr, int count)
-{
-	for (; count > 0; count--, ptr++) {
-		__raw_writel(ptr->val, ptr->reg);
-	}
+	return 0;
 }
 
-/* s3c2410_pm_show_resume_irqs
- *
- * print any IRQs asserted at resume time (ie, we woke from)
-*/
-
-static void s3c2410_pm_show_resume_irqs(int start, unsigned long which,
-					unsigned long mask)
+static int s3c2410_pm_add(struct sys_device *dev)
 {
-	int i;
+	pm_cpu_prep = s3c2410_pm_prepare;
+	pm_cpu_sleep = s3c2410_cpu_suspend;
 
-	which &= ~mask;
-
-	for (i = 0; i <= 31; i++) {
-		if ((which) & (1L<<i)) {
-			DBG("IRQ %d asserted at resume\n", start+i);
-		}
-	}
+	return 0;
 }
 
-/* s3c2410_pm_check_resume_pin
- *
- * check to see if the pin is configured correctly for sleep mode, and
- * make any necessary adjustments if it is not
-*/
-
-static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
-{
-	unsigned long irqstate;
-	unsigned long pinstate;
-	int irq = s3c2410_gpio_getirq(pin);
-
-	if (irqoffs < 4)
-		irqstate = s3c_irqwake_intmask & (1L<<irqoffs);
-	else
-		irqstate = s3c_irqwake_eintmask & (1L<<irqoffs);
-
-	pinstate = s3c2410_gpio_getcfg(pin);
-
-	if (!irqstate) {
-		if (pinstate == S3C2410_GPIO_IRQ)
-			DBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin);
-	} else {
-		if (pinstate == S3C2410_GPIO_IRQ) {
-			DBG("Disabling IRQ %d (pin %d)\n", irq, pin);
-			s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
-		}
-	}
-}
+#if defined(CONFIG_CPU_S3C2410)
+static struct sysdev_driver s3c2410_pm_driver = {
+	.add		= s3c2410_pm_add,
+	.resume		= s3c2410_pm_resume,
+};
 
-/* s3c2410_pm_configure_extint
- *
- * configure all external interrupt pins
-*/
+/* register ourselves */
 
-static void s3c2410_pm_configure_extint(void)
+static int __init s3c2410_pm_drvinit(void)
 {
-	int pin;
-
-	/* for each of the external interrupts (EINT0..EINT15) we
-	 * need to check wether it is an external interrupt source,
-	 * and then configure it as an input if it is not
-	*/
-
-	for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) {
-		s3c2410_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
-	}
-
-	for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) {
-		s3c2410_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
-	}
+	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_pm_driver);
 }
 
-void (*pm_cpu_prep)(void);
-void (*pm_cpu_sleep)(void);
-
-#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
-
-/* s3c2410_pm_enter
- *
- * central control for sleep/resume process
-*/
-
-static int s3c2410_pm_enter(suspend_state_t state)
-{
-	unsigned long regs_save[16];
-
-	/* ensure the debug is initialised (if enabled) */
-
-	s3c2410_pm_debug_init();
-
-	DBG("s3c2410_pm_enter(%d)\n", state);
-
-	if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
-		printk(KERN_ERR PFX "error: no cpu sleep functions set\n");
-		return -EINVAL;
-	}
-
-	if (state != PM_SUSPEND_MEM) {
-		printk(KERN_ERR PFX "error: only PM_SUSPEND_MEM supported\n");
-		return -EINVAL;
-	}
-
-	/* check if we have anything to wake-up with... bad things seem
-	 * to happen if you suspend with no wakeup (system will often
-	 * require a full power-cycle)
-	*/
-
-	if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
-	    !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
-		printk(KERN_ERR PFX "No sources enabled for wake-up!\n");
-		printk(KERN_ERR PFX "Aborting sleep\n");
-		return -EINVAL;
-	}
-
-	/* prepare check area if configured */
-
-	s3c2410_pm_check_prepare();
-
-	/* store the physical address of the register recovery block */
-
-	s3c2410_sleep_save_phys = virt_to_phys(regs_save);
-
-	DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys);
-
-	/* save all necessary core registers not covered by the drivers */
-
-	s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save));
-	s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save));
-	s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save));
-
-	/* set the irq configuration for wake */
-
-	s3c2410_pm_configure_extint();
-
-	DBG("sleep: irq wakeup masks: %08lx,%08lx\n",
-	    s3c_irqwake_intmask, s3c_irqwake_eintmask);
-
-	__raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
-	__raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK);
-
-	/* ack any outstanding external interrupts before we go to sleep */
-
-	__raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
-	__raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
-	__raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
-
-	/* call cpu specific preperation */
-
-	pm_cpu_prep();
-
-	/* flush cache back to ram */
-
-	flush_cache_all();
-
-	s3c2410_pm_check_store();
-
-	/* send the cpu to sleep... */
-
-	__raw_writel(0x00, S3C2410_CLKCON);  /* turn off clocks over sleep */
-
-	/* s3c2410_cpu_save will also act as our return point from when
-	 * we resume as it saves its own register state, so use the return
-	 * code to differentiate return from save and return from sleep */
-
-	if (s3c2410_cpu_save(regs_save) == 0) {
-		flush_cache_all();
-		pm_cpu_sleep();
-	}
-
-	/* restore the cpu state */
-
-	cpu_init();
-
-	/* restore the system state */
-
-	s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
-	s3c2410_pm_do_restore(gpio_save, ARRAY_SIZE(gpio_save));
-	s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save));
-
-	s3c2410_pm_debug_init();
-
-	/* check what irq (if any) restored the system */
-
-	DBG("post sleep: IRQs 0x%08x, 0x%08x\n",
-	    __raw_readl(S3C2410_SRCPND),
-	    __raw_readl(S3C2410_EINTPEND));
-
-	s3c2410_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND),
-				    s3c_irqwake_intmask);
-
-	s3c2410_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
-				    s3c_irqwake_eintmask);
-
-	DBG("post sleep, preparing to return\n");
-
-	s3c2410_pm_check_restore();
-
-	/* ok, let's return from sleep */
+arch_initcall(s3c2410_pm_drvinit);
+#endif
 
-	DBG("S3C2410 PM Resume (post-restore)\n");
-	return 0;
-}
+#if defined(CONFIG_CPU_S3C2440)
+static struct sysdev_driver s3c2440_pm_driver = {
+	.add		= s3c2410_pm_add,
+	.resume		= s3c2410_pm_resume,
+};
 
-/*
- * Called after processes are frozen, but before we shut down devices.
- */
-static int s3c2410_pm_prepare(suspend_state_t state)
+static int __init s3c2440_pm_drvinit(void)
 {
-	return 0;
+	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_pm_driver);
 }
 
-/*
- * Called after devices are re-setup, but before processes are thawed.
- */
-static int s3c2410_pm_finish(suspend_state_t state)
-{
-	return 0;
-}
+arch_initcall(s3c2440_pm_drvinit);
+#endif
 
-/*
- * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
- */
-static struct pm_ops s3c2410_pm_ops = {
-	.pm_disk_mode	= PM_DISK_FIRMWARE,
-	.prepare	= s3c2410_pm_prepare,
-	.enter		= s3c2410_pm_enter,
-	.finish		= s3c2410_pm_finish,
+#if defined(CONFIG_CPU_S3C2442)
+static struct sysdev_driver s3c2442_pm_driver = {
+	.add		= s3c2410_pm_add,
+	.resume		= s3c2410_pm_resume,
 };
 
-/* s3c2410_pm_init
- *
- * Attach the power management functions. This should be called
- * from the board specific initialisation if the board supports
- * it.
-*/
-
-int __init s3c2410_pm_init(void)
+static int __init s3c2442_pm_drvinit(void)
 {
-	printk("S3C2410 Power Management, (c) 2004 Simtec Electronics\n");
-
-	pm_set_ops(&s3c2410_pm_ops);
-	return 0;
+	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_pm_driver);
 }
+
+arch_initcall(s3c2442_pm_drvinit);
+#endif
diff --git a/arch/arm/mach-s3c2410/pm.h b/arch/arm/mach-s3c2410/pm.h
deleted file mode 100644
index ffe197a..0000000
--- a/arch/arm/mach-s3c2410/pm.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/pm.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Written by Ben Dooks, <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* s3c2410_pm_init
- *
- * called from board at initialisation time to setup the power
- * management
-*/
-
-#ifdef CONFIG_PM
-
-extern __init int s3c2410_pm_init(void);
-
-#else
-
-static inline int s3c2410_pm_init(void)
-{
-	return 0;
-}
-#endif
-
-/* configuration for the IRQ mask over sleep */
-extern unsigned long s3c_irqwake_intmask;
-extern unsigned long s3c_irqwake_eintmask;
-
-/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */
-extern unsigned long s3c_irqwake_intallow;
-extern unsigned long s3c_irqwake_eintallow;
-
-/* per-cpu sleep functions */
-
-extern void (*pm_cpu_prep)(void);
-extern void (*pm_cpu_sleep)(void);
-
-/* Flags for PM Control */
-
-extern unsigned long s3c_pm_flags;
-
-/* from sleep.S */
-
-extern int  s3c2410_cpu_save(unsigned long *saveblk);
-extern void s3c2410_cpu_suspend(void);
-extern void s3c2410_cpu_resume(void);
-
-extern unsigned long s3c2410_sleep_save_phys;
-
-/* sleep save info */
-
-struct sleep_save {
-	void __iomem	*reg;
-	unsigned long	val;
-};
-
-#define SAVE_ITEM(x) \
-	{ .reg = (x) }
-
-extern void s3c2410_pm_do_save(struct sleep_save *ptr, int count);
-extern void s3c2410_pm_do_restore(struct sleep_save *ptr, int count);
-
-#ifdef CONFIG_PM
-extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state);
-extern int s3c24xx_irq_resume(struct sys_device *dev);
-#else
-#define s3c24xx_irq_suspend NULL
-#define s3c24xx_irq_resume  NULL
-#endif
diff --git a/arch/arm/mach-s3c2410/s3c2400-gpio.c b/arch/arm/mach-s3c2410/s3c2400-gpio.c
deleted file mode 100644
index 1576d01..0000000
--- a/arch/arm/mach-s3c2410/s3c2400-gpio.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2400-gpio.c
- *
- * Copyright (c) 2006 Lucas Correia Villa Real <lucasvr@gobolinux.org>
- *
- * S3C2400 GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-#include <asm/arch/regs-gpio.h>
-
-int s3c2400_gpio_getirq(unsigned int pin)
-{
-	if (pin < S3C2410_GPE0 || pin > S3C2400_GPE7_EINT7)
-		return -1;  /* not valid interrupts */
-
-	return (pin - S3C2410_GPE0) + IRQ_EINT0;
-}
-
-EXPORT_SYMBOL(s3c2400_gpio_getirq);
diff --git a/arch/arm/mach-s3c2410/s3c2400.h b/arch/arm/mach-s3c2410/s3c2400.h
deleted file mode 100644
index 8b2394e..0000000
--- a/arch/arm/mach-s3c2410/s3c2400.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* arch/arm/mach-s3c2410/s3c2400.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C2400 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Modifications:
- *     09-Fev-2006 LCVR  First version, based on s3c2410.h
-*/
-
-#ifdef CONFIG_CPU_S3C2400
-
-extern  int s3c2400_init(void);
-
-extern void s3c2400_map_io(struct map_desc *mach_desc, int size);
-
-extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2400_init_clocks(int xtal);
-
-#else
-#define s3c2400_init_clocks NULL
-#define s3c2400_init_uarts NULL
-#define s3c2400_map_io NULL
-#define s3c2400_init NULL
-#endif
diff --git a/arch/arm/mach-s3c2410/s3c2410-clock.c b/arch/arm/mach-s3c2410/s3c2410-clock.c
deleted file mode 100644
index 992cc6a..0000000
--- a/arch/arm/mach-s3c2410/s3c2410-clock.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2410-clock.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410,S3C2440,S3C2442 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/sysdev.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
-
-#include <asm/mach/map.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
-
-#include "s3c2410.h"
-#include "clock.h"
-#include "cpu.h"
-
-int s3c2410_clkcon_enable(struct clk *clk, int enable)
-{
-	unsigned int clocks = clk->ctrlbit;
-	unsigned long clkcon;
-
-	clkcon = __raw_readl(S3C2410_CLKCON);
-
-	if (enable)
-		clkcon |= clocks;
-	else
-		clkcon &= ~clocks;
-
-	/* ensure none of the special function bits set */
-	clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);
-
-	__raw_writel(clkcon, S3C2410_CLKCON);
-
-	return 0;
-}
-
-static int s3c2410_upll_enable(struct clk *clk, int enable)
-{
-	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
-	unsigned long orig = clkslow;
-
-	if (enable)
-		clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF;
-	else
-		clkslow |= S3C2410_CLKSLOW_UCLK_OFF;
-
-	__raw_writel(clkslow, S3C2410_CLKSLOW);
-
-	/* if we started the UPLL, then allow to settle */
-
-	if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF))
-		udelay(200);
-
-	return 0;
-}
-
-/* standard clock definitions */
-
-static struct clk init_clocks_disable[] = {
-	{
-		.name		= "nand",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_NAND,
-	}, {
-		.name		= "sdi",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_SDI,
-	}, {
-		.name		= "adc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_ADC,
-	}, {
-		.name		= "i2c",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_IIC,
-	}, {
-		.name		= "iis",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_IIS,
-	}, {
-		.name		= "spi",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_SPI,
-	}
-};
-
-static struct clk init_clocks[] = {
-	{
-		.name		= "lcd",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_LCDC,
-	}, {
-		.name		= "gpio",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_GPIO,
-	}, {
-		.name		= "usb-host",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_USBH,
-	}, {
-		.name		= "usb-device",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_USBD,
-	}, {
-		.name		= "timers",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_PWMT,
-	}, {
-		.name		= "uart",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_UART0,
-	}, {
-		.name		= "uart",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_UART1,
-	}, {
-		.name		= "uart",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_UART2,
-	}, {
-		.name		= "rtc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_RTC,
-	}, {
-		.name		= "watchdog",
-		.id		= -1,
-		.parent		= &clk_p,
-		.ctrlbit	= 0,
-	}, {
-		.name		= "usb-bus-host",
-		.id		= -1,
-		.parent		= &clk_usb_bus,
-	}, {
-		.name		= "usb-bus-gadget",
-		.id		= -1,
-		.parent		= &clk_usb_bus,
-	},
-};
-
-/* s3c2410_baseclk_add()
- *
- * Add all the clocks used by the s3c2410 or compatible CPUs
- * such as the S3C2440 and S3C2442.
- *
- * We cannot use a system device as we are needed before any
- * of the init-calls that initialise the devices are actually
- * done.
-*/
-
-int __init s3c2410_baseclk_add(void)
-{
-	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
-	unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
-	struct clk *clkp;
-	struct clk *xtal;
-	int ret;
-	int ptr;
-
-	clk_upll.enable = s3c2410_upll_enable;
-
-	if (s3c24xx_register_clock(&clk_usb_bus) < 0)
-		printk(KERN_ERR "failed to register usb bus clock\n");
-
-	/* register clocks from clock array */
-
-	clkp = init_clocks;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
-		/* ensure that we note the clock state */
-
-		clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	/* We must be careful disabling the clocks we are not intending to
-	 * be using at boot time, as subsytems such as the LCD which do
-	 * their own DMA requests to the bus can cause the system to lockup
-	 * if they where in the middle of requesting bus access.
-	 *
-	 * Disabling the LCD clock if the LCD is active is very dangerous,
-	 * and therefore the bootloader should be careful to not enable
-	 * the LCD clock if it is not needed.
-	*/
-
-	/* install (and disable) the clocks we do not need immediately */
-
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-
-		s3c2410_clkcon_enable(clkp, 0);
-	}
-
-	/* show the clock-slow value */
-
-	xtal = clk_get(NULL, "xtal");
-
-	printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n",
-	       print_mhz(clk_get_rate(xtal) /
-			 ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))),
-	       (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast",
-	       (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
-	       (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
-
-	return 0;
-}
diff --git a/arch/arm/mach-s3c2410/s3c2410-dma.c b/arch/arm/mach-s3c2410/s3c2410-dma.c
deleted file mode 100644
index e67ba39..0000000
--- a/arch/arm/mach-s3c2410/s3c2410-dma.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2410-dma.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 DMA selection
- *
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-
-#include <asm/dma.h>
-#include <asm/arch/dma.h>
-#include "dma.h"
-
-#include "cpu.h"
-
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
-#include <asm/arch/regs-iis.h>
-#include <asm/arch/regs-spi.h>
-
-static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = {
-	[DMACH_XD0] = {
-		.name		= "xdreq0",
-		.channels[0]	= S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID,
-	},
-	[DMACH_XD1] = {
-		.name		= "xdreq1",
-		.channels[1]	= S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID,
-	},
-	[DMACH_SDI] = {
-		.name		= "sdi",
-		.channels[0]	= S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
-		.channels[2]	= S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
-		.channels[3]	= S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
-		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
-	},
-	[DMACH_SPI0] = {
-		.name		= "spi0",
-		.channels[1]	= S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_SPI + S3C2410_SPTDAT,
-		.hw_addr.from	= S3C2410_PA_SPI + S3C2410_SPRDAT,
-	},
-	[DMACH_SPI1] = {
-		.name		= "spi1",
-		.channels[3]	= S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
-		.hw_addr.from	= S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
-	},
-	[DMACH_UART0] = {
-		.name		= "uart0",
-		.channels[0]	= S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
-	},
-	[DMACH_UART1] = {
-		.name		= "uart1",
-		.channels[1]	= S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
-	},
-      	[DMACH_UART2] = {
-		.name		= "uart2",
-		.channels[3]	= S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
-	},
-	[DMACH_TIMER] = {
-		.name		= "timer",
-		.channels[0]	= S3C2410_DCON_CH0_TIMER | DMA_CH_VALID,
-		.channels[2]	= S3C2410_DCON_CH2_TIMER | DMA_CH_VALID,
-		.channels[3]	= S3C2410_DCON_CH3_TIMER | DMA_CH_VALID,
-	},
-	[DMACH_I2S_IN] = {
-		.name		= "i2s-sdi",
-		.channels[1]	= S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
-		.channels[2]	= S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
-		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
-	},
-	[DMACH_I2S_OUT] = {
-		.name		= "i2s-sdo",
-		.channels[2]	= S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
-	},
-	[DMACH_USB_EP1] = {
-		.name		= "usb-ep1",
-		.channels[0]	= S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID,
-	},
-	[DMACH_USB_EP2] = {
-		.name		= "usb-ep2",
-		.channels[1]	= S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID,
-	},
-	[DMACH_USB_EP3] = {
-		.name		= "usb-ep3",
-		.channels[2]	= S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID,
-	},
-	[DMACH_USB_EP4] = {
-		.name		= "usb-ep4",
-		.channels[3]	=S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID,
-	},
-};
-
-static void s3c2410_dma_select(struct s3c2410_dma_chan *chan,
-			       struct s3c24xx_dma_map *map)
-{
-	chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID;
-}
-
-static struct s3c24xx_dma_selection __initdata s3c2410_dma_sel = {
-	.select		= s3c2410_dma_select,
-	.dcon_mask	= 7 << 24,
-	.map		= s3c2410_dma_mappings,
-	.map_size	= ARRAY_SIZE(s3c2410_dma_mappings),
-};
-
-static int s3c2410_dma_add(struct sys_device *sysdev)
-{
-	return s3c24xx_dma_init_map(&s3c2410_dma_sel);
-}
-
-#if defined(CONFIG_CPU_S3C2410)
-static struct sysdev_driver s3c2410_dma_driver = {
-	.add	= s3c2410_dma_add,
-};
-
-static int __init s3c2410_dma_init(void)
-{
-	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_dma_driver);
-}
-
-arch_initcall(s3c2410_dma_init);
-#endif
-
-#if defined(CONFIG_CPU_S3C2442)
-/* S3C2442 DMA contains the same selection table as the S3C2410 */
-static struct sysdev_driver s3c2442_dma_driver = {
-	.add	= s3c2410_dma_add,
-};
-
-static int __init s3c2442_dma_init(void)
-{
-	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_dma_driver);
-}
-
-arch_initcall(s3c2442_dma_init);
-#endif
-
diff --git a/arch/arm/mach-s3c2410/s3c2410-gpio.c b/arch/arm/mach-s3c2410/s3c2410-gpio.c
deleted file mode 100644
index ec3a276..0000000
--- a/arch/arm/mach-s3c2410/s3c2410-gpio.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2410-gpio.c
- *
- * Copyright (c) 2004-2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-#include <asm/arch/regs-gpio.h>
-
-int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
-			   unsigned int config)
-{
-	void __iomem *reg = S3C24XX_EINFLT0;
-	unsigned long flags;
-	unsigned long val;
-
-	if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15)
-		return -1;
-
-	config &= 0xff;
-
-	pin -= S3C2410_GPG8;
-	reg += pin & ~3;
-
-	local_irq_save(flags);
-
-	/* update filter width and clock source */
-
-	val = __raw_readl(reg);
-	val &= ~(0xff << ((pin & 3) * 8));
-	val |= config << ((pin & 3) * 8);
-	__raw_writel(val, reg);
-
-	/* update filter enable */
-
-	val = __raw_readl(S3C24XX_EXTINT2);
-	val &= ~(1 << ((pin * 4) + 3));
-	val |= on << ((pin * 4) + 3);
-	__raw_writel(val, S3C24XX_EXTINT2);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_irqfilter);
diff --git a/arch/arm/mach-s3c2410/s3c2410-irq.c b/arch/arm/mach-s3c2410/s3c2410-irq.c
deleted file mode 100644
index c796c9c..0000000
--- a/arch/arm/mach-s3c2410/s3c2410-irq.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2410-irq.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/ptrace.h>
-#include <linux/sysdev.h>
-
-#include "cpu.h"
-#include "pm.h"
-
-static int s3c2410_irq_add(struct sys_device *sysdev)
-{
-	return 0;
-}
-
-static struct sysdev_driver s3c2410_irq_driver = {
-	.add		= s3c2410_irq_add,
-	.suspend	= s3c24xx_irq_suspend,
-	.resume		= s3c24xx_irq_resume,
-};
-
-static int s3c2410_irq_init(void)
-{
-	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver);
-}
-
-arch_initcall(s3c2410_irq_init);
diff --git a/arch/arm/mach-s3c2410/s3c2410-pm.c b/arch/arm/mach-s3c2410/s3c2410-pm.c
deleted file mode 100644
index 8bb6e5e..0000000
--- a/arch/arm/mach-s3c2410/s3c2410-pm.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2410-pm.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/time.h>
-#include <linux/sysdev.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/h1940.h>
-
-#include "cpu.h"
-#include "pm.h"
-
-#ifdef CONFIG_S3C2410_PM_DEBUG
-extern void pm_dbg(const char *fmt, ...);
-#define DBG(fmt...) pm_dbg(fmt)
-#else
-#define DBG(fmt...) printk(KERN_DEBUG fmt)
-#endif
-
-static void s3c2410_pm_prepare(void)
-{
-	/* ensure at least GSTATUS3 has the resume address */
-
-	__raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3);
-
-	DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
-	DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
-
-	if (machine_is_h1940()) {
-		void *base = phys_to_virt(H1940_SUSPEND_CHECK);
-		unsigned long ptr;
-		unsigned long calc = 0;
-
-		/* generate check for the bootloader to check on resume */
-
-		for (ptr = 0; ptr < 0x40000; ptr += 0x400)
-			calc += __raw_readl(base+ptr);
-
-		__raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
-	}
-
-	/* the RX3715 uses similar code and the same H1940 and the
-	 * same offsets for resume and checksum pointers */
-
-	if (machine_is_rx3715()) {
-		void *base = phys_to_virt(H1940_SUSPEND_CHECK);
-		unsigned long ptr;
-		unsigned long calc = 0;
-
-		/* generate check for the bootloader to check on resume */
-
-		for (ptr = 0; ptr < 0x40000; ptr += 0x4)
-			calc += __raw_readl(base+ptr);
-
-		__raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
-	}
-
-	if ( machine_is_aml_m5900() )
-		s3c2410_gpio_setpin(S3C2410_GPF2, 1);
-
-}
-
-static int s3c2410_pm_resume(struct sys_device *dev)
-{
-	unsigned long tmp;
-
-	/* unset the return-from-sleep flag, to ensure reset */
-
-	tmp = __raw_readl(S3C2410_GSTATUS2);
-	tmp &= S3C2410_GSTATUS2_OFFRESET;
-	__raw_writel(tmp, S3C2410_GSTATUS2);
-
-	if ( machine_is_aml_m5900() )
-		s3c2410_gpio_setpin(S3C2410_GPF2, 0);
-
-	return 0;
-}
-
-static int s3c2410_pm_add(struct sys_device *dev)
-{
-	pm_cpu_prep = s3c2410_pm_prepare;
-	pm_cpu_sleep = s3c2410_cpu_suspend;
-
-	return 0;
-}
-
-#if defined(CONFIG_CPU_S3C2410)
-static struct sysdev_driver s3c2410_pm_driver = {
-	.add		= s3c2410_pm_add,
-	.resume		= s3c2410_pm_resume,
-};
-
-/* register ourselves */
-
-static int __init s3c2410_pm_drvinit(void)
-{
-	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_pm_driver);
-}
-
-arch_initcall(s3c2410_pm_drvinit);
-#endif
-
-#if defined(CONFIG_CPU_S3C2440)
-static struct sysdev_driver s3c2440_pm_driver = {
-	.add		= s3c2410_pm_add,
-	.resume		= s3c2410_pm_resume,
-};
-
-static int __init s3c2440_pm_drvinit(void)
-{
-	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_pm_driver);
-}
-
-arch_initcall(s3c2440_pm_drvinit);
-#endif
-
-#if defined(CONFIG_CPU_S3C2442)
-static struct sysdev_driver s3c2442_pm_driver = {
-	.add		= s3c2410_pm_add,
-	.resume		= s3c2410_pm_resume,
-};
-
-static int __init s3c2442_pm_drvinit(void)
-{
-	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_pm_driver);
-}
-
-arch_initcall(s3c2442_pm_drvinit);
-#endif
diff --git a/arch/arm/mach-s3c2410/s3c2410-sleep.S b/arch/arm/mach-s3c2410/s3c2410-sleep.S
deleted file mode 100644
index 9179a10..0000000
--- a/arch/arm/mach-s3c2410/s3c2410-sleep.S
+++ /dev/null
@@ -1,68 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2410-sleep.S
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 Power Manager (Suspend-To-RAM) support
- *
- * Based on PXA/SA1100 sleep code by:
- *	Nicolas Pitre, (c) 2002 Monta Vista Software Inc
- *	Cliff Brake, (c) 2001
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/hardware.h>
-#include <asm/arch/map.h>
-
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-serial.h>
-
-	/* s3c2410_cpu_suspend
-	 *
-	 * put the cpu into sleep mode
-	*/
-
-ENTRY(s3c2410_cpu_suspend)
-	@@ prepare cpu to sleep
-
-	ldr	r4, =S3C2410_REFRESH
-	ldr	r5, =S3C24XX_MISCCR
-	ldr	r6, =S3C2410_CLKCON
-	ldr	r7, [ r4 ]		@ get REFRESH (and ensure in TLB)
-	ldr	r8, [ r5 ]		@ get MISCCR (and ensure in TLB)
-	ldr	r9, [ r6 ]		@ get CLKCON (and ensure in TLB)
-
-	orr	r7, r7, #S3C2410_REFRESH_SELF	@ SDRAM sleep command
-	orr	r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
-	orr	r9, r9, #S3C2410_CLKCON_POWER	@ power down command
-
-	teq	pc, #0			@ first as a trial-run to load cache
-	bl	s3c2410_do_sleep
-	teq	r0, r0			@ now do it for real
-	b	s3c2410_do_sleep	@
-
-	@@ align next bit of code to cache line
-	.align	8
-s3c2410_do_sleep:
-	streq	r7, [ r4 ]			@ SDRAM sleep command
-	streq	r8, [ r5 ]			@ SDRAM power-down config
-	streq	r9, [ r6 ]			@ CPU sleep
-1:	beq	1b
-	mov	pc, r14
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index 4cdc0d7..d96fdcf 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -31,10 +31,10 @@
 #include <asm/arch/regs-clock.h>
 #include <asm/arch/regs-serial.h>
 
-#include "s3c2410.h"
-#include "cpu.h"
-#include "devs.h"
-#include "clock.h"
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/clock.h>
 
 /* Initial IO mappings */
 
diff --git a/arch/arm/mach-s3c2410/s3c2410.h b/arch/arm/mach-s3c2410/s3c2410.h
deleted file mode 100644
index fbed084..0000000
--- a/arch/arm/mach-s3c2410/s3c2410.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* arch/arm/mach-s3c2410/s3c2410.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2410 machine directory
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#ifdef CONFIG_CPU_S3C2410
-
-extern  int s3c2410_init(void);
-
-extern void s3c2410_map_io(struct map_desc *mach_desc, int size);
-
-extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2410_init_clocks(int xtal);
-
-extern  int s3c2410_baseclk_add(void);
-
-#else
-#define s3c2410_init_clocks NULL
-#define s3c2410_init_uarts NULL
-#define s3c2410_map_io NULL
-#define s3c2410_init NULL
-#endif
diff --git a/arch/arm/mach-s3c2410/s3c2412-clock.c b/arch/arm/mach-s3c2410/s3c2412-clock.c
deleted file mode 100644
index 8f94ad8..0000000
--- a/arch/arm/mach-s3c2410/s3c2412-clock.c
+++ /dev/null
@@ -1,716 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2412-clock.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2412,S3C2413 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/sysdev.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
-
-#include <asm/mach/map.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
-
-#include "s3c2412.h"
-#include "clock.h"
-#include "cpu.h"
-
-/* We currently have to assume that the system is running
- * from the XTPll input, and that all ***REFCLKs are being
- * fed from it, as we cannot read the state of OM[4] from
- * software.
- *
- * It would be possible for each board initialisation to
- * set the correct muxing at initialisation
-*/
-
-static int s3c2412_clkcon_enable(struct clk *clk, int enable)
-{
-	unsigned int clocks = clk->ctrlbit;
-	unsigned long clkcon;
-
-	clkcon = __raw_readl(S3C2410_CLKCON);
-
-	if (enable)
-		clkcon |= clocks;
-	else
-		clkcon &= ~clocks;
-
-	__raw_writel(clkcon, S3C2410_CLKCON);
-
-	return 0;
-}
-
-static int s3c2412_upll_enable(struct clk *clk, int enable)
-{
-	unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
-	unsigned long orig = upllcon;
-
-	if (!enable)
-		upllcon |= S3C2412_PLLCON_OFF;
-	else
-		upllcon &= ~S3C2412_PLLCON_OFF;
-
-	__raw_writel(upllcon, S3C2410_UPLLCON);
-
-	/* allow ~150uS for the PLL to settle and lock */
-
-	if (enable && (orig & S3C2412_PLLCON_OFF))
-		udelay(150);
-
-	return 0;
-}
-
-/* clock selections */
-
-/* CPU EXTCLK input */
-static struct clk clk_ext = {
-	.name		= "extclk",
-	.id		= -1,
-};
-
-static struct clk clk_erefclk = {
-	.name		= "erefclk",
-	.id		= -1,
-};
-
-static struct clk clk_urefclk = {
-	.name		= "urefclk",
-	.id		= -1,
-};
-
-static int s3c2412_setparent_usysclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_urefclk)
-		clksrc &= ~S3C2412_CLKSRC_USYSCLK_UPLL;
-	else if (parent == &clk_upll)
-		clksrc |= S3C2412_CLKSRC_USYSCLK_UPLL;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static struct clk clk_usysclk = {
-	.name		= "usysclk",
-	.id		= -1,
-	.parent		= &clk_xtal,
-	.set_parent	= s3c2412_setparent_usysclk,
-};
-
-static struct clk clk_mrefclk = {
-	.name		= "mrefclk",
-	.parent		= &clk_xtal,
-	.id		= -1,
-};
-
-static struct clk clk_mdivclk = {
-	.name		= "mdivclk",
-	.parent		= &clk_xtal,
-	.id		= -1,
-};
-
-static int s3c2412_setparent_usbsrc(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_usysclk)
-		clksrc &= ~S3C2412_CLKSRC_USBCLK_HCLK;
-	else if (parent == &clk_h)
-		clksrc |= S3C2412_CLKSRC_USBCLK_HCLK;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static unsigned long s3c2412_roundrate_usbsrc(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	div = parent_rate / rate;
-	if (div > 2)
-		div = 2;
-
-	return parent_rate / div;
-}
-
-static unsigned long s3c2412_getrate_usbsrc(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
-	return parent_rate / ((div & S3C2412_CLKDIVN_USB48DIV) ? 2 : 1);
-}
-
-static int s3c2412_setrate_usbsrc(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
-	rate = s3c2412_roundrate_usbsrc(clk, rate);
-
-	if ((parent_rate / rate) == 2)
-		clkdivn |= S3C2412_CLKDIVN_USB48DIV;
-	else
-		clkdivn &= ~S3C2412_CLKDIVN_USB48DIV;
-
-	__raw_writel(clkdivn, S3C2410_CLKDIVN);
-	return 0;
-}
-
-static struct clk clk_usbsrc = {
-	.name		= "usbsrc",
-	.id		= -1,
-	.get_rate	= s3c2412_getrate_usbsrc,
-	.set_rate	= s3c2412_setrate_usbsrc,
-	.round_rate	= s3c2412_roundrate_usbsrc,
-	.set_parent	= s3c2412_setparent_usbsrc,
-};
-
-static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_mdivclk)
-		clksrc &= ~S3C2412_CLKSRC_MSYSCLK_MPLL;
-	else if (parent == &clk_upll)
-		clksrc |= S3C2412_CLKSRC_MSYSCLK_MPLL;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static struct clk clk_msysclk = {
-	.name		= "msysclk",
-	.id		= -1,
-	.set_parent	= s3c2412_setparent_msysclk,
-};
-
-/* these next clocks have an divider immediately after them,
- * so we can register them with their divider and leave out the
- * intermediate clock stage
-*/
-static unsigned long s3c2412_roundrate_clksrc(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	/* note, we remove the +/- 1 calculations as they cancel out */
-
-	div = (rate / parent_rate);
-
-	if (div < 1)
-		div = 1;
-	else if (div > 16)
-		div = 16;
-
-	return parent_rate / div;
-}
-
-static int s3c2412_setparent_uart(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_erefclk)
-		clksrc &= ~S3C2412_CLKSRC_UARTCLK_MPLL;
-	else if (parent == &clk_mpll)
-		clksrc |= S3C2412_CLKSRC_UARTCLK_MPLL;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static unsigned long s3c2412_getrate_uart(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
-	div &= S3C2412_CLKDIVN_UARTDIV_MASK;
-	div >>= S3C2412_CLKDIVN_UARTDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2412_setrate_uart(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
-	rate = s3c2412_roundrate_clksrc(clk, rate);
-
-	clkdivn &= ~S3C2412_CLKDIVN_UARTDIV_MASK;
-	clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_UARTDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2410_CLKDIVN);
-	return 0;
-}
-
-static struct clk clk_uart = {
-	.name		= "uartclk",
-	.id		= -1,
-	.get_rate	= s3c2412_getrate_uart,
-	.set_rate	= s3c2412_setrate_uart,
-	.set_parent	= s3c2412_setparent_uart,
-	.round_rate	= s3c2412_roundrate_clksrc,
-};
-
-static int s3c2412_setparent_i2s(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_erefclk)
-		clksrc &= ~S3C2412_CLKSRC_I2SCLK_MPLL;
-	else if (parent == &clk_mpll)
-		clksrc |= S3C2412_CLKSRC_I2SCLK_MPLL;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static unsigned long s3c2412_getrate_i2s(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
-	div &= S3C2412_CLKDIVN_I2SDIV_MASK;
-	div >>= S3C2412_CLKDIVN_I2SDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2412_setrate_i2s(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
-	rate = s3c2412_roundrate_clksrc(clk, rate);
-
-	clkdivn &= ~S3C2412_CLKDIVN_I2SDIV_MASK;
-	clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_I2SDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2410_CLKDIVN);
-	return 0;
-}
-
-static struct clk clk_i2s = {
-	.name		= "i2sclk",
-	.id		= -1,
-	.get_rate	= s3c2412_getrate_i2s,
-	.set_rate	= s3c2412_setrate_i2s,
-	.set_parent	= s3c2412_setparent_i2s,
-	.round_rate	= s3c2412_roundrate_clksrc,
-};
-
-static int s3c2412_setparent_cam(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_usysclk)
-		clksrc &= ~S3C2412_CLKSRC_CAMCLK_HCLK;
-	else if (parent == &clk_h)
-		clksrc |= S3C2412_CLKSRC_CAMCLK_HCLK;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-static unsigned long s3c2412_getrate_cam(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
-	div &= S3C2412_CLKDIVN_CAMDIV_MASK;
-	div >>= S3C2412_CLKDIVN_CAMDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2412_setrate_cam(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
-	rate = s3c2412_roundrate_clksrc(clk, rate);
-
-	clkdivn &= ~S3C2412_CLKDIVN_CAMDIV_MASK;
-	clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_CAMDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2410_CLKDIVN);
-	return 0;
-}
-
-static struct clk clk_cam = {
-	.name		= "camif-upll",	/* same as 2440 name */
-	.id		= -1,
-	.get_rate	= s3c2412_getrate_cam,
-	.set_rate	= s3c2412_setrate_cam,
-	.set_parent	= s3c2412_setparent_cam,
-	.round_rate	= s3c2412_roundrate_clksrc,
-};
-
-/* standard clock definitions */
-
-static struct clk init_clocks_disable[] = {
-	{
-		.name		= "nand",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_NAND,
-	}, {
-		.name		= "sdi",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_SDI,
-	}, {
-		.name		= "adc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_ADC,
-	}, {
-		.name		= "i2c",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_IIC,
-	}, {
-		.name		= "iis",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_IIS,
-	}, {
-		.name		= "spi",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_SPI,
-	}
-};
-
-static struct clk init_clocks[] = {
-	{
-		.name		= "dma",
-		.id		= 0,
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_DMA0,
-	}, {
-		.name		= "dma",
-		.id		= 1,
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_DMA1,
-	}, {
-		.name		= "dma",
-		.id		= 2,
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_DMA2,
-	}, {
-		.name		= "dma",
-		.id		= 3,
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_DMA3,
-	}, {
-		.name		= "lcd",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_LCDC,
-	}, {
-		.name		= "gpio",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_GPIO,
-	}, {
-		.name		= "usb-host",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_USBH,
-	}, {
-		.name		= "usb-device",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_USBD,
-	}, {
-		.name		= "timers",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_PWMT,
-	}, {
-		.name		= "uart",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_UART0,
-	}, {
-		.name		= "uart",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_UART1,
-	}, {
-		.name		= "uart",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_UART2,
-	}, {
-		.name		= "rtc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_RTC,
-	}, {
-		.name		= "watchdog",
-		.id		= -1,
-		.parent		= &clk_p,
-		.ctrlbit	= 0,
-	}, {
-		.name		= "usb-bus-gadget",
-		.id		= -1,
-		.parent		= &clk_usb_bus,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_USB_DEV48,
-	}, {
-		.name		= "usb-bus-host",
-		.id		= -1,
-		.parent		= &clk_usb_bus,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_USB_HOST48,
-	}
-};
-
-/* clocks to add where we need to check their parentage */
-
-struct clk_init {
-	struct clk	*clk;
-	unsigned int	 bit;
-	struct clk	*src_0;
-	struct clk	*src_1;
-};
-
-static struct clk_init clks_src[] __initdata = {
-	{
-		.clk	= &clk_usysclk,
-		.bit	= S3C2412_CLKSRC_USBCLK_HCLK,
-		.src_0	= &clk_urefclk,
-		.src_1	= &clk_upll,
-	}, {
-		.clk	= &clk_i2s,
-		.bit	= S3C2412_CLKSRC_I2SCLK_MPLL,
-		.src_0	= &clk_erefclk,
-		.src_1	= &clk_mpll,
-	}, {
-		.clk	= &clk_cam,
-		.bit	= S3C2412_CLKSRC_CAMCLK_HCLK,
-		.src_0	= &clk_usysclk,
-		.src_1	= &clk_h,
-	}, {
-		.clk	= &clk_msysclk,
-		.bit	= S3C2412_CLKSRC_MSYSCLK_MPLL,
-		.src_0	= &clk_mdivclk,
-		.src_1	= &clk_mpll,
-	}, {
-		.clk	= &clk_uart,
-		.bit	= S3C2412_CLKSRC_UARTCLK_MPLL,
-		.src_0	= &clk_erefclk,
-		.src_1	= &clk_mpll,
-	}, {
-		.clk	= &clk_usbsrc,
-		.bit	= S3C2412_CLKSRC_USBCLK_HCLK,
-		.src_0	= &clk_usysclk,
-		.src_1	= &clk_h,
-	},
-};
-
-/* s3c2412_clk_initparents
- *
- * Initialise the parents for the clocks that we get at start-time
-*/
-
-static void __init s3c2412_clk_initparents(void)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-	struct clk_init *cip = clks_src;
-	struct clk *src;
-	int ptr;
-	int ret;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clks_src); ptr++, cip++) {
-		ret = s3c24xx_register_clock(cip->clk);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       cip->clk->name, ret);
-		}
-
-		src = (clksrc & cip->bit) ? cip->src_1 : cip->src_0;
-
-		printk(KERN_INFO "%s: parent %s\n", cip->clk->name, src->name);
-		clk_set_parent(cip->clk, src);
-	}
-}
-
-/* clocks to add straight away */
-
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_usb_bus,
-	&clk_erefclk,
-	&clk_urefclk,
-	&clk_mrefclk,
-};
-
-int __init s3c2412_baseclk_add(void)
-{
-	unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
-	struct clk *clkp;
-	int ret;
-	int ptr;
-
-	clk_upll.enable = s3c2412_upll_enable;
-	clk_usb_bus.parent = &clk_usbsrc;
-	clk_usb_bus.rate = 0x0;
-
-	s3c2412_clk_initparents();
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
-		clkp = clks[ptr];
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	/* ensure usb bus clock is within correct rate of 48MHz */
-
-	if (clk_get_rate(&clk_usb_bus) != (48 * 1000 * 1000)) {
-		printk(KERN_INFO "Warning: USB bus clock not at 48MHz\n");
-
-		/* for the moment, let's use the UPLL, and see if we can
-		 * get 48MHz */
-
-		clk_set_parent(&clk_usysclk, &clk_upll);
-		clk_set_parent(&clk_usbsrc, &clk_usysclk);
-		clk_set_rate(&clk_usbsrc, 48*1000*1000);
-	}
-
-	printk("S3C2412: upll %s, %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
-	       (__raw_readl(S3C2410_UPLLCON) & S3C2412_PLLCON_OFF) ? "off":"on",
-	       print_mhz(clk_get_rate(&clk_upll)),
-	       print_mhz(clk_get_rate(&clk_usb_bus)));
-
-	/* register clocks from clock array */
-
-	clkp = init_clocks;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
-		/* ensure that we note the clock state */
-
-		clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	/* We must be careful disabling the clocks we are not intending to
-	 * be using at boot time, as subsytems such as the LCD which do
-	 * their own DMA requests to the bus can cause the system to lockup
-	 * if they where in the middle of requesting bus access.
-	 *
-	 * Disabling the LCD clock if the LCD is active is very dangerous,
-	 * and therefore the bootloader should be careful to not enable
-	 * the LCD clock if it is not needed.
-	*/
-
-	/* install (and disable) the clocks we do not need immediately */
-
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-
-		s3c2412_clkcon_enable(clkp, 0);
-	}
-
-	return 0;
-}
diff --git a/arch/arm/mach-s3c2410/s3c2412-dma.c b/arch/arm/mach-s3c2410/s3c2412-dma.c
deleted file mode 100644
index 138f726..0000000
--- a/arch/arm/mach-s3c2410/s3c2412-dma.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2412-dma.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2412 DMA selection
- *
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-
-#include <asm/dma.h>
-#include <asm/arch/dma.h>
-#include <asm/io.h>
-
-#include "dma.h"
-#include "cpu.h"
-
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
-#include <asm/arch/regs-iis.h>
-#include <asm/arch/regs-spi.h>
-
-#define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID }
-
-static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = {
-	[DMACH_XD0] = {
-		.name		= "xdreq0",
-		.channels	= MAP(S3C2412_DMAREQSEL_XDREQ0),
-	},
-	[DMACH_XD1] = {
-		.name		= "xdreq1",
-		.channels	= MAP(S3C2412_DMAREQSEL_XDREQ1),
-	},
-	[DMACH_SDI] = {
-		.name		= "sdi",
-		.channels	= MAP(S3C2412_DMAREQSEL_SDI),
-		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
-		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
-	},
-	[DMACH_SPI0] = {
-		.name		= "spi0",
-		.channels	= MAP(S3C2412_DMAREQSEL_SPI0TX),
-		.hw_addr.to	= S3C2410_PA_SPI + S3C2410_SPTDAT,
-		.hw_addr.from	= S3C2410_PA_SPI + S3C2410_SPRDAT,
-	},
-	[DMACH_SPI1] = {
-		.name		= "spi1",
-		.channels	= MAP(S3C2412_DMAREQSEL_SPI1TX),
-		.hw_addr.to	= S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
-		.hw_addr.from	= S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
-	},
-	[DMACH_UART0] = {
-		.name		= "uart0",
-		.channels	= MAP(S3C2412_DMAREQSEL_UART0_0),
-		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
-	},
-	[DMACH_UART1] = {
-		.name		= "uart1",
-		.channels	= MAP(S3C2412_DMAREQSEL_UART1_0),
-		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
-	},
-      	[DMACH_UART2] = {
-		.name		= "uart2",
-		.channels	= MAP(S3C2412_DMAREQSEL_UART2_0),
-		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
-	},
-	[DMACH_UART0_SRC2] = {
-		.name		= "uart0",
-		.channels	= MAP(S3C2412_DMAREQSEL_UART0_1),
-		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
-	},
-	[DMACH_UART1_SRC2] = {
-		.name		= "uart1",
-		.channels	= MAP(S3C2412_DMAREQSEL_UART1_1),
-		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
-	},
-      	[DMACH_UART2_SRC2] = {
-		.name		= "uart2",
-		.channels	= MAP(S3C2412_DMAREQSEL_UART2_1),
-		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
-	},
-	[DMACH_TIMER] = {
-		.name		= "timer",
-		.channels	= MAP(S3C2412_DMAREQSEL_TIMER),
-	},
-	[DMACH_I2S_IN] = {
-		.name		= "i2s-sdi",
-		.channels	= MAP(S3C2412_DMAREQSEL_I2SRX),
-		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
-	},
-	[DMACH_I2S_OUT] = {
-		.name		= "i2s-sdo",
-		.channels	= MAP(S3C2412_DMAREQSEL_I2STX),
-		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
-	},
-	[DMACH_USB_EP1] = {
-		.name		= "usb-ep1",
-		.channels	= MAP(S3C2412_DMAREQSEL_USBEP1),
-	},
-	[DMACH_USB_EP2] = {
-		.name		= "usb-ep2",
-		.channels	= MAP(S3C2412_DMAREQSEL_USBEP2),
-	},
-	[DMACH_USB_EP3] = {
-		.name		= "usb-ep3",
-		.channels	= MAP(S3C2412_DMAREQSEL_USBEP3),
-	},
-	[DMACH_USB_EP4] = {
-		.name		= "usb-ep4",
-		.channels	= MAP(S3C2412_DMAREQSEL_USBEP4),
-	},
-};
-
-static void s3c2412_dma_select(struct s3c2410_dma_chan *chan,
-			       struct s3c24xx_dma_map *map)
-{
-	writel(map->channels[0] | S3C2412_DMAREQSEL_HW,
-	       chan->regs + S3C2412_DMA_DMAREQSEL);
-}
-
-static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = {
-	.select		= s3c2412_dma_select,
-	.dcon_mask	= 0,
-	.map		= s3c2412_dma_mappings,
-	.map_size	= ARRAY_SIZE(s3c2412_dma_mappings),
-};
-
-static int s3c2412_dma_add(struct sys_device *sysdev)
-{
-	return s3c24xx_dma_init_map(&s3c2412_dma_sel);
-}
-
-static struct sysdev_driver s3c2412_dma_driver = {
-	.add	= s3c2412_dma_add,
-};
-
-static int __init s3c2412_dma_init(void)
-{
-	return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_dma_driver);
-}
-
-arch_initcall(s3c2412_dma_init);
diff --git a/arch/arm/mach-s3c2410/s3c2412-irq.c b/arch/arm/mach-s3c2410/s3c2412-irq.c
deleted file mode 100644
index ffcc30b..0000000
--- a/arch/arm/mach-s3c2410/s3c2412-irq.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/s3c2412-irq.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/ptrace.h>
-#include <linux/sysdev.h>
-
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-#include <asm/mach/irq.h>
-
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
-
-#include "cpu.h"
-#include "irq.h"
-#include "pm.h"
-
-/* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by
- * having them turn up in both the INT* and the EINT* registers. Whilst
- * both show the status, they both now need to be acked when the IRQs
- * go off.
-*/
-
-static void
-s3c2412_irq_mask(unsigned int irqno)
-{
-	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
-	unsigned long mask;
-
-	mask = __raw_readl(S3C2410_INTMSK);
-	__raw_writel(mask | bitval, S3C2410_INTMSK);
-
-	mask = __raw_readl(S3C2412_EINTMASK);
-	__raw_writel(mask | bitval, S3C2412_EINTMASK);
-}
-
-static inline void
-s3c2412_irq_ack(unsigned int irqno)
-{
-	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
-
-	__raw_writel(bitval, S3C2412_EINTPEND);
-	__raw_writel(bitval, S3C2410_SRCPND);
-	__raw_writel(bitval, S3C2410_INTPND);
-}
-
-static inline void
-s3c2412_irq_maskack(unsigned int irqno)
-{
-	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
-	unsigned long mask;
-
-	mask = __raw_readl(S3C2410_INTMSK);
-	__raw_writel(mask|bitval, S3C2410_INTMSK);
-
-	mask = __raw_readl(S3C2412_EINTMASK);
-	__raw_writel(mask | bitval, S3C2412_EINTMASK);
-
-	__raw_writel(bitval, S3C2412_EINTPEND);
-	__raw_writel(bitval, S3C2410_SRCPND);
-	__raw_writel(bitval, S3C2410_INTPND);
-}
-
-static void
-s3c2412_irq_unmask(unsigned int irqno)
-{
-	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
-	unsigned long mask;
-
-	mask = __raw_readl(S3C2412_EINTMASK);
-	__raw_writel(mask & ~bitval, S3C2412_EINTMASK);
-
-	mask = __raw_readl(S3C2410_INTMSK);
-	__raw_writel(mask & ~bitval, S3C2410_INTMSK);
-}
-
-static struct irq_chip s3c2412_irq_eint0t4 = {
-	.ack	   = s3c2412_irq_ack,
-	.mask	   = s3c2412_irq_mask,
-	.unmask	   = s3c2412_irq_unmask,
-	.set_wake  = s3c_irq_wake,
-	.set_type  = s3c_irqext_type,
-};
-
-static int s3c2412_irq_add(struct sys_device *sysdev)
-{
-	unsigned int irqno;
-
-	for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
-		set_irq_chip(irqno, &s3c2412_irq_eint0t4);
-		set_irq_handler(irqno, handle_edge_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	return 0;
-}
-
-static struct sysdev_driver s3c2412_irq_driver = {
-	.add		= s3c2412_irq_add,
-	.suspend	= s3c24xx_irq_suspend,
-	.resume		= s3c24xx_irq_resume,
-};
-
-static int s3c2412_irq_init(void)
-{
-	return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_irq_driver);
-}
-
-arch_initcall(s3c2412_irq_init);
diff --git a/arch/arm/mach-s3c2410/s3c2412-pm.c b/arch/arm/mach-s3c2410/s3c2412-pm.c
deleted file mode 100644
index 19b6332..0000000
--- a/arch/arm/mach-s3c2410/s3c2412-pm.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2412-pm.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * http://armlinux.simtec.co.uk/.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/sysdev.h>
-#include <linux/platform_device.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#include <asm/arch/regs-power.h>
-#include <asm/arch/regs-gpioj.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-dsc.h>
-
-#include "cpu.h"
-#include "pm.h"
-
-#include "s3c2412.h"
-
-static void s3c2412_cpu_suspend(void)
-{
-	unsigned long tmp;
-
-	/* set our standby method to sleep */
-
-	tmp = __raw_readl(S3C2412_PWRCFG);
-	tmp |= S3C2412_PWRCFG_STANDBYWFI_SLEEP;
-	__raw_writel(tmp, S3C2412_PWRCFG);
-
-	/* issue the standby signal into the pm unit. Note, we
-	 * issue a write-buffer drain just in case */
-
-	tmp = 0;
-
-	asm("b 1f\n\t"
-	    ".align 5\n\t"
-	    "1:\n\t"
-	    "mcr p15, 0, %0, c7, c10, 4\n\t"
-	    "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp));
-
-	/* we should never get past here */
-
-	panic("sleep resumed to originator?");
-}
-
-static void s3c2412_pm_prepare(void)
-{
-}
-
-static int s3c2412_pm_add(struct sys_device *sysdev)
-{
-	pm_cpu_prep = s3c2412_pm_prepare;
-	pm_cpu_sleep = s3c2412_cpu_suspend;
-
-	return 0;
-}
-
-static struct sleep_save s3c2412_sleep[] = {
-	SAVE_ITEM(S3C2412_DSC0),
-	SAVE_ITEM(S3C2412_DSC1),
-	SAVE_ITEM(S3C2413_GPJDAT),
-	SAVE_ITEM(S3C2413_GPJCON),
-	SAVE_ITEM(S3C2413_GPJUP),
-
-	/* save the PWRCFG to get back to original sleep method */
-
-	SAVE_ITEM(S3C2412_PWRCFG),
-
-	/* save the sleep configuration anyway, just in case these
-	 * get damaged during wakeup */
-
-	SAVE_ITEM(S3C2412_GPBSLPCON),
-	SAVE_ITEM(S3C2412_GPCSLPCON),
-	SAVE_ITEM(S3C2412_GPDSLPCON),
-	SAVE_ITEM(S3C2412_GPESLPCON),
-	SAVE_ITEM(S3C2412_GPFSLPCON),
-	SAVE_ITEM(S3C2412_GPGSLPCON),
-	SAVE_ITEM(S3C2412_GPHSLPCON),
-	SAVE_ITEM(S3C2413_GPJSLPCON),
-};
-
-static int s3c2412_pm_suspend(struct sys_device *dev, pm_message_t state)
-{
-	s3c2410_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
-	return 0;
-}
-
-static int s3c2412_pm_resume(struct sys_device *dev)
-{
-	unsigned long tmp;
-
-	tmp = __raw_readl(S3C2412_PWRCFG);
-	tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK;
-	tmp |=  S3C2412_PWRCFG_STANDBYWFI_IDLE;
-	__raw_writel(tmp, S3C2412_PWRCFG);
-
-	s3c2410_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
-	return 0;
-}
-
-static struct sysdev_driver s3c2412_pm_driver = {
-	.add		= s3c2412_pm_add,
-	.suspend	= s3c2412_pm_suspend,
-	.resume		= s3c2412_pm_resume,
-};
-
-static __init int s3c2412_pm_init(void)
-{
-	return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_pm_driver);
-}
-
-arch_initcall(s3c2412_pm_init);
diff --git a/arch/arm/mach-s3c2410/s3c2412.c b/arch/arm/mach-s3c2410/s3c2412.c
deleted file mode 100644
index 2f651a8..0000000
--- a/arch/arm/mach-s3c2410/s3c2412.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2412.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * http://armlinux.simtec.co.uk/.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/hardware.h>
-#include <asm/proc-fns.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#include <asm/arch/idle.h>
-
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-power.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-gpioj.h>
-#include <asm/arch/regs-dsc.h>
-
-#include "s3c2412.h"
-#include "cpu.h"
-#include "devs.h"
-#include "clock.h"
-#include "pm.h"
-
-#ifndef CONFIG_CPU_S3C2412_ONLY
-void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
-
-static inline void s3c2412_init_gpio2(void)
-{
-	s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10;
-}
-#else
-#define s3c2412_init_gpio2() do { } while(0)
-#endif
-
-/* Initial IO mappings */
-
-static struct map_desc s3c2412_iodesc[] __initdata = {
-	IODESC_ENT(CLKPWR),
-	IODESC_ENT(LCD),
-	IODESC_ENT(TIMER),
-	IODESC_ENT(WATCHDOG),
-};
-
-/* uart registration process */
-
-void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c2412-uart", s3c2410_uart_resources, cfg, no);
-
-	/* rename devices that are s3c2412/s3c2413 specific */
-	s3c_device_sdi.name  = "s3c2412-sdi";
-	s3c_device_lcd.name  = "s3c2412-lcd";
-	s3c_device_nand.name = "s3c2412-nand";
-}
-
-/* s3c2412_idle
- *
- * use the standard idle call by ensuring the idle mode
- * in power config, then issuing the idle co-processor
- * instruction
-*/
-
-static void s3c2412_idle(void)
-{
-	unsigned long tmp;
-
-	/* ensure our idle mode is to go to idle */
-
-	tmp = __raw_readl(S3C2412_PWRCFG);
-	tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK;
-	tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE;
-	__raw_writel(tmp, S3C2412_PWRCFG);
-
-	cpu_do_idle();
-}
-
-/* s3c2412_map_io
- *
- * register the standard cpu IO areas, and any passed in from the
- * machine specific initialisation.
-*/
-
-void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size)
-{
-	/* move base of IO */
-
-	s3c2412_init_gpio2();
-
-	/* set our idle function */
-
-	s3c24xx_idle = s3c2412_idle;
-
-	/* register our io-tables */
-
-	iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));
-	iotable_init(mach_desc, mach_size);
-}
-
-void __init s3c2412_init_clocks(int xtal)
-{
-	unsigned long tmp;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long pclk;
-
-	/* now we've got our machine bits initialised, work out what
-	 * clocks we've got */
-
-	fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal*2);
-
-	tmp = __raw_readl(S3C2410_CLKDIVN);
-
-	/* work out clock scalings */
-
-	hclk = fclk / ((tmp & S3C2412_CLKDIVN_HDIVN_MASK) + 1);
-	hclk /= ((tmp & S3C2421_CLKDIVN_ARMDIVN) ? 2 : 1);
-	pclk = hclk / ((tmp & S3C2412_CLKDIVN_PDIVN) ? 2 : 1);
-
-	/* print brieft summary of clocks, etc */
-
-	printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
-	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
-	/* initialise the clocks here, to allow other things like the
-	 * console to use them
-	 */
-
-	s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
-	s3c2412_baseclk_add();
-}
-
-/* need to register class before we actually register the device, and
- * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2412 based system)
- * as a driver which may support both 2410 and 2440 may try and use it.
-*/
-
-struct sysdev_class s3c2412_sysclass = {
-	set_kset_name("s3c2412-core"),
-};
-
-static int __init s3c2412_core_init(void)
-{
-	return sysdev_class_register(&s3c2412_sysclass);
-}
-
-core_initcall(s3c2412_core_init);
-
-static struct sys_device s3c2412_sysdev = {
-	.cls		= &s3c2412_sysclass,
-};
-
-int __init s3c2412_init(void)
-{
-	printk("S3C2412: Initialising architecture\n");
-
-	return sysdev_register(&s3c2412_sysdev);
-}
diff --git a/arch/arm/mach-s3c2410/s3c2412.h b/arch/arm/mach-s3c2410/s3c2412.h
deleted file mode 100644
index c6e5603..0000000
--- a/arch/arm/mach-s3c2410/s3c2412.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* arch/arm/mach-s3c2410/s3c2412.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2412 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2412
-
-extern  int s3c2412_init(void);
-
-extern void s3c2412_map_io(struct map_desc *mach_desc, int size);
-
-extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2412_init_clocks(int xtal);
-
-extern  int s3c2412_baseclk_add(void);
-#else
-#define s3c2412_init_clocks NULL
-#define s3c2412_init_uarts NULL
-#define s3c2412_map_io NULL
-#define s3c2412_init NULL
-#endif
diff --git a/arch/arm/mach-s3c2410/s3c2440-clock.c b/arch/arm/mach-s3c2410/s3c2440-clock.c
deleted file mode 100644
index ba13c1d..0000000
--- a/arch/arm/mach-s3c2410/s3c2440-clock.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2440-clock.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440 Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/sysdev.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mutex.h>
-#include <linux/clk.h>
-
-#include <asm/hardware.h>
-#include <asm/atomic.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-#include <asm/arch/regs-clock.h>
-
-#include "clock.h"
-#include "cpu.h"
-
-/* S3C2440 extended clock support */
-
-static unsigned long s3c2440_camif_upll_round(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	/* note, we remove the +/- 1 calculations for the divisor */
-
-	div = (parent_rate / rate) / 2;
-
-	if (div < 1)
-		div = 1;
-	else if (div > 16)
-		div = 16;
-
-	return parent_rate / (div * 2);
-}
-
-static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
-
-	rate = s3c2440_camif_upll_round(clk, rate);
-
-	camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK);
-
-	if (rate != parent_rate) {
-		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
-		camdivn |= (((parent_rate / rate) / 2) - 1);
-	}
-
-	__raw_writel(camdivn, S3C2440_CAMDIVN);
-
-	return 0;
-}
-
-/* Extra S3C2440 clocks */
-
-static struct clk s3c2440_clk_cam = {
-	.name		= "camif",
-	.id		= -1,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2440_clk_cam_upll = {
-	.name		= "camif-upll",
-	.id		= -1,
-	.set_rate	= s3c2440_camif_upll_setrate,
-	.round_rate	= s3c2440_camif_upll_round,
-};
-
-static struct clk s3c2440_clk_ac97 = {
-	.name		= "ac97",
-	.id		= -1,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_CAMERA,
-};
-
-static int s3c2440_clk_add(struct sys_device *sysdev)
-{
-	unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
-	unsigned long clkdivn;
-	struct clk *clock_h;
-	struct clk *clock_p;
-	struct clk *clock_upll;
-
-	printk("S3C2440: Clock Support, DVS %s\n",
-	       (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
-
-	clock_p = clk_get(NULL, "pclk");
-	clock_h = clk_get(NULL, "hclk");
-	clock_upll = clk_get(NULL, "upll");
-
-	if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
-		printk(KERN_ERR "S3C2440: Failed to get parent clocks\n");
-		return -EINVAL;
-	}
-
-	/* check rate of UPLL, and if it is near 96MHz, then change
-	 * to using half the UPLL rate for the system */
-
-	if (clk_get_rate(clock_upll) > (94 * MHZ)) {
-		clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
-
-		mutex_lock(&clocks_mutex);
-
-		clkdivn = __raw_readl(S3C2410_CLKDIVN);
-		clkdivn |= S3C2440_CLKDIVN_UCLK;
-		__raw_writel(clkdivn, S3C2410_CLKDIVN);
-
-		mutex_unlock(&clocks_mutex);
-	}
-
-	s3c2440_clk_cam.parent = clock_h;
-	s3c2440_clk_ac97.parent = clock_p;
-	s3c2440_clk_cam_upll.parent = clock_upll;
-
-	s3c24xx_register_clock(&s3c2440_clk_ac97);
-	s3c24xx_register_clock(&s3c2440_clk_cam);
-	s3c24xx_register_clock(&s3c2440_clk_cam_upll);
-
-	clk_disable(&s3c2440_clk_ac97);
-	clk_disable(&s3c2440_clk_cam);
-
-	return 0;
-}
-
-static struct sysdev_driver s3c2440_clk_driver = {
-	.add	= s3c2440_clk_add,
-};
-
-static __init int s3c24xx_clk_driver(void)
-{
-	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_clk_driver);
-}
-
-arch_initcall(s3c24xx_clk_driver);
diff --git a/arch/arm/mach-s3c2410/s3c2440-dma.c b/arch/arm/mach-s3c2410/s3c2440-dma.c
deleted file mode 100644
index 47b861b..0000000
--- a/arch/arm/mach-s3c2410/s3c2440-dma.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2440-dma.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440 DMA selection
- *
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-
-#include <asm/dma.h>
-#include <asm/arch/dma.h>
-#include "dma.h"
-
-#include "cpu.h"
-
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
-#include <asm/arch/regs-iis.h>
-#include <asm/arch/regs-spi.h>
-
-static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = {
-	[DMACH_XD0] = {
-		.name		= "xdreq0",
-		.channels[0]	= S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID,
-	},
-	[DMACH_XD1] = {
-		.name		= "xdreq1",
-		.channels[1]	= S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID,
-	},
-	[DMACH_SDI] = {
-		.name		= "sdi",
-		.channels[0]	= S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
-		.channels[1]	= S3C2440_DCON_CH1_SDI | DMA_CH_VALID,
-		.channels[2]	= S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
-		.channels[3]	= S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
-		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
-	},
-	[DMACH_SPI0] = {
-		.name		= "spi0",
-		.channels[1]	= S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_SPI + S3C2410_SPTDAT,
-		.hw_addr.from	= S3C2410_PA_SPI + S3C2410_SPRDAT,
-	},
-	[DMACH_SPI1] = {
-		.name		= "spi1",
-		.channels[3]	= S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
-		.hw_addr.from	= S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
-	},
-	[DMACH_UART0] = {
-		.name		= "uart0",
-		.channels[0]	= S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
-	},
-	[DMACH_UART1] = {
-		.name		= "uart1",
-		.channels[1]	= S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
-	},
-      	[DMACH_UART2] = {
-		.name		= "uart2",
-		.channels[3]	= S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
-	},
-	[DMACH_TIMER] = {
-		.name		= "timer",
-		.channels[0]	= S3C2410_DCON_CH0_TIMER | DMA_CH_VALID,
-		.channels[2]	= S3C2410_DCON_CH2_TIMER | DMA_CH_VALID,
-		.channels[3]	= S3C2410_DCON_CH3_TIMER | DMA_CH_VALID,
-	},
-	[DMACH_I2S_IN] = {
-		.name		= "i2s-sdi",
-		.channels[1]	= S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
-		.channels[2]	= S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
-		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
-	},
-	[DMACH_I2S_OUT] = {
-		.name		= "i2s-sdo",
-		.channels[0]	= S3C2440_DCON_CH0_I2SSDO | DMA_CH_VALID,
-		.channels[2]	= S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
-	},
-	[DMACH_PCM_IN] = {
-		.name		= "pcm-in",
-		.channels[0]	= S3C2440_DCON_CH0_PCMIN | DMA_CH_VALID,
-		.channels[2]	= S3C2440_DCON_CH2_PCMIN | DMA_CH_VALID,
-		.hw_addr.from	= S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
-	},
-	[DMACH_PCM_OUT] = {
-		.name		= "pcm-out",
-		.channels[1]	= S3C2440_DCON_CH1_PCMOUT | DMA_CH_VALID,
-		.channels[3]	= S3C2440_DCON_CH3_PCMOUT | DMA_CH_VALID,
-		.hw_addr.to	= S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
-	},
-	[DMACH_MIC_IN] = {
-		.name		= "mic-in",
-		.channels[2]	= S3C2440_DCON_CH2_MICIN | DMA_CH_VALID,
-		.channels[3]	= S3C2440_DCON_CH3_MICIN | DMA_CH_VALID,
-		.hw_addr.from	= S3C2440_PA_AC97 + S3C_AC97_MIC_DATA,
-	},
-	[DMACH_USB_EP1] = {
-		.name		= "usb-ep1",
-		.channels[0]	= S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID,
-	},
-	[DMACH_USB_EP2] = {
-		.name		= "usb-ep2",
-		.channels[1]	= S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID,
-	},
-	[DMACH_USB_EP3] = {
-		.name		= "usb-ep3",
-		.channels[2]	= S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID,
-	},
-	[DMACH_USB_EP4] = {
-		.name		= "usb-ep4",
-		.channels[3]	= S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID,
-	},
-};
-
-static void s3c2440_dma_select(struct s3c2410_dma_chan *chan,
-			       struct s3c24xx_dma_map *map)
-{
-	chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID;
-}
-
-static struct s3c24xx_dma_selection __initdata s3c2440_dma_sel = {
-	.select		= s3c2440_dma_select,
-	.dcon_mask	= 7 << 24,
-	.map		= s3c2440_dma_mappings,
-	.map_size	= ARRAY_SIZE(s3c2440_dma_mappings),
-};
-
-static int s3c2440_dma_add(struct sys_device *sysdev)
-{
-	return s3c24xx_dma_init_map(&s3c2440_dma_sel);
-}
-
-static struct sysdev_driver s3c2440_dma_driver = {
-	.add	= s3c2440_dma_add,
-};
-
-static int __init s3c2440_dma_init(void)
-{
-	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_dma_driver);
-}
-
-arch_initcall(s3c2440_dma_init);
-
diff --git a/arch/arm/mach-s3c2410/s3c2440-dsc.c b/arch/arm/mach-s3c2410/s3c2440-dsc.c
deleted file mode 100644
index c92ea66..0000000
--- a/arch/arm/mach-s3c2410/s3c2440-dsc.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2440-dsc.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C2440 Drive Strength Control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-dsc.h>
-
-#include "cpu.h"
-#include "s3c2440.h"
-
-int s3c2440_set_dsc(unsigned int pin, unsigned int value)
-{
-	void __iomem *base;
-	unsigned long val;
-	unsigned long flags;
-	unsigned long mask;
-
-	base = (pin & S3C2440_SELECT_DSC1) ? S3C2440_DSC1 : S3C2440_DSC0;
-	mask = 3 << S3C2440_DSC_GETSHIFT(pin);
-
-	local_irq_save(flags);
-
-	val = __raw_readl(base);
-	val &= ~mask;
-	val |= value & mask;
-	__raw_writel(val, base);
-
-	local_irq_restore(flags);
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2440_set_dsc);
diff --git a/arch/arm/mach-s3c2410/s3c2440-irq.c b/arch/arm/mach-s3c2410/s3c2440-irq.c
deleted file mode 100644
index 1ba19b2..0000000
--- a/arch/arm/mach-s3c2410/s3c2440-irq.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2440-irq.c
- *
- * Copyright (c) 2003,2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/ptrace.h>
-#include <linux/sysdev.h>
-
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-#include <asm/mach/irq.h>
-
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
-
-#include "cpu.h"
-#include "pm.h"
-#include "irq.h"
-
-/* WDT/AC97 */
-
-static void s3c_irq_demux_wdtac97(unsigned int irq,
-				  struct irq_desc *desc)
-{
-	unsigned int subsrc, submsk;
-	struct irq_desc *mydesc;
-
-	/* read the current pending interrupts, and the mask
-	 * for what it is available */
-
-	subsrc = __raw_readl(S3C2410_SUBSRCPND);
-	submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-	subsrc &= ~submsk;
-	subsrc >>= 13;
-	subsrc &= 3;
-
-	if (subsrc != 0) {
-		if (subsrc & 1) {
-			mydesc = irq_desc + IRQ_S3C2440_WDT;
-			desc_handle_irq(IRQ_S3C2440_WDT, mydesc);
-		}
-		if (subsrc & 2) {
-			mydesc = irq_desc + IRQ_S3C2440_AC97;
-			desc_handle_irq(IRQ_S3C2440_AC97, mydesc);
-		}
-	}
-}
-
-
-#define INTMSK_WDT	 (1UL << (IRQ_WDT - IRQ_EINT0))
-
-static void
-s3c_irq_wdtac97_mask(unsigned int irqno)
-{
-	s3c_irqsub_mask(irqno, INTMSK_WDT, 3<<13);
-}
-
-static void
-s3c_irq_wdtac97_unmask(unsigned int irqno)
-{
-	s3c_irqsub_unmask(irqno, INTMSK_WDT);
-}
-
-static void
-s3c_irq_wdtac97_ack(unsigned int irqno)
-{
-	s3c_irqsub_maskack(irqno, INTMSK_WDT, 3<<13);
-}
-
-static struct irq_chip s3c_irq_wdtac97 = {
-	.mask	    = s3c_irq_wdtac97_mask,
-	.unmask	    = s3c_irq_wdtac97_unmask,
-	.ack	    = s3c_irq_wdtac97_ack,
-};
-
-static int s3c2440_irq_add(struct sys_device *sysdev)
-{
-	unsigned int irqno;
-
-	printk("S3C2440: IRQ Support\n");
-
-	/* add new chained handler for wdt, ac7 */
-
-	set_irq_chip(IRQ_WDT, &s3c_irq_level_chip);
-	set_irq_handler(IRQ_WDT, handle_level_irq);
-	set_irq_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
-
-	for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
-		set_irq_chip(irqno, &s3c_irq_wdtac97);
-		set_irq_handler(irqno, handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	return 0;
-}
-
-static struct sysdev_driver s3c2440_irq_driver = {
-	.add		= s3c2440_irq_add,
-};
-
-static int s3c2440_irq_init(void)
-{
-	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_irq_driver);
-}
-
-arch_initcall(s3c2440_irq_init);
-
diff --git a/arch/arm/mach-s3c2410/s3c2440.c b/arch/arm/mach-s3c2410/s3c2440.c
deleted file mode 100644
index 344eb27..0000000
--- a/arch/arm/mach-s3c2410/s3c2440.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2440.c
- *
- * Copyright (c) 2004-2006 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C2440 Mobile CPU support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/sysdev.h>
-#include <linux/clk.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#include "s3c2440.h"
-#include "devs.h"
-#include "cpu.h"
-
-static struct sys_device s3c2440_sysdev = {
-	.cls		= &s3c2440_sysclass,
-};
-
-int __init s3c2440_init(void)
-{
-	printk("S3C2440: Initialising architecture\n");
-
-	/* change irq for watchdog */
-
-	s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
-	s3c_device_wdt.resource[1].end   = IRQ_S3C2440_WDT;
-
-	/* register our system device for everything else */
-
-	return sysdev_register(&s3c2440_sysdev);
-}
diff --git a/arch/arm/mach-s3c2410/s3c2440.h b/arch/arm/mach-s3c2410/s3c2440.h
deleted file mode 100644
index dcd3160..0000000
--- a/arch/arm/mach-s3c2410/s3c2440.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* arch/arm/mach-s3c2410/s3c2440.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2440 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2440
-extern  int s3c2440_init(void);
-#else
-#define s3c2440_init NULL
-#endif
diff --git a/arch/arm/mach-s3c2410/s3c2442-clock.c b/arch/arm/mach-s3c2410/s3c2442-clock.c
deleted file mode 100644
index 4e292ca..0000000
--- a/arch/arm/mach-s3c2410/s3c2442-clock.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2442-clock.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2442 Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/sysdev.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mutex.h>
-#include <linux/clk.h>
-
-#include <asm/hardware.h>
-#include <asm/atomic.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-#include <asm/arch/regs-clock.h>
-
-#include "clock.h"
-#include "cpu.h"
-
-/* S3C2442 extended clock support */
-
-static unsigned long s3c2442_camif_upll_round(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	div = parent_rate / rate;
-
-	if (div == 3)
-		return parent_rate / 3;
-
-	/* note, we remove the +/- 1 calculations for the divisor */
-
-	div /= 2;
-
-	if (div < 1)
-		div = 1;
-	else if (div > 16)
-		div = 16;
-
-	return parent_rate / (div * 2);
-}
-
-static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
-
-	rate = s3c2442_camif_upll_round(clk, rate);
-
-	camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3;
-
-	if (rate == parent_rate) {
-		camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL;
-	} else if ((parent_rate / rate) == 3) {
-		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
-		camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3;
-	} else {
-		camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK;
-		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
-		camdivn |= (((parent_rate / rate) / 2) - 1);
-	}
-
-	__raw_writel(camdivn, S3C2440_CAMDIVN);
-
-	return 0;
-}
-
-/* Extra S3C2442 clocks */
-
-static struct clk s3c2442_clk_cam = {
-	.name		= "camif",
-	.id		= -1,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2442_clk_cam_upll = {
-	.name		= "camif-upll",
-	.id		= -1,
-	.set_rate	= s3c2442_camif_upll_setrate,
-	.round_rate	= s3c2442_camif_upll_round,
-};
-
-static int s3c2442_clk_add(struct sys_device *sysdev)
-{
-	unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
-	unsigned long clkdivn;
-	struct clk *clock_h;
-	struct clk *clock_p;
-	struct clk *clock_upll;
-
-	printk("S3C2442: Clock Support, DVS %s\n",
-	       (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
-
-	clock_p = clk_get(NULL, "pclk");
-	clock_h = clk_get(NULL, "hclk");
-	clock_upll = clk_get(NULL, "upll");
-
-	if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
-		printk(KERN_ERR "S3C2442: Failed to get parent clocks\n");
-		return -EINVAL;
-	}
-
-	/* check rate of UPLL, and if it is near 96MHz, then change
-	 * to using half the UPLL rate for the system */
-
-	if (clk_get_rate(clock_upll) > (94 * MHZ)) {
-		clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
-
-		mutex_lock(&clocks_mutex);
-
-		clkdivn = __raw_readl(S3C2410_CLKDIVN);
-		clkdivn |= S3C2440_CLKDIVN_UCLK;
-		__raw_writel(clkdivn, S3C2410_CLKDIVN);
-
-		mutex_unlock(&clocks_mutex);
-	}
-
-	s3c2442_clk_cam.parent = clock_h;
-	s3c2442_clk_cam_upll.parent = clock_upll;
-
-	s3c24xx_register_clock(&s3c2442_clk_cam);
-	s3c24xx_register_clock(&s3c2442_clk_cam_upll);
-
-	clk_disable(&s3c2442_clk_cam);
-
-	return 0;
-}
-
-static struct sysdev_driver s3c2442_clk_driver = {
-	.add	= s3c2442_clk_add,
-};
-
-static __init int s3c2442_clk_init(void)
-{
-	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_clk_driver);
-}
-
-arch_initcall(s3c2442_clk_init);
diff --git a/arch/arm/mach-s3c2410/s3c2442.c b/arch/arm/mach-s3c2410/s3c2442.c
deleted file mode 100644
index 428732e..0000000
--- a/arch/arm/mach-s3c2410/s3c2442.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2442.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C2442 Mobile CPU support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/sysdev.h>
-
-#include "s3c2442.h"
-#include "cpu.h"
-
-static struct sys_device s3c2442_sysdev = {
-	.cls		= &s3c2442_sysclass,
-};
-
-int __init s3c2442_init(void)
-{
-	printk("S3C2442: Initialising architecture\n");
-
-	return sysdev_register(&s3c2442_sysdev);
-}
diff --git a/arch/arm/mach-s3c2410/s3c2442.h b/arch/arm/mach-s3c2410/s3c2442.h
deleted file mode 100644
index 0ae37d2..0000000
--- a/arch/arm/mach-s3c2410/s3c2442.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* arch/arm/mach-s3c2410/s3c2442.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2442 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2442
-extern  int s3c2442_init(void);
-#else
-#define s3c2442_init NULL
-#endif
diff --git a/arch/arm/mach-s3c2410/s3c244x-irq.c b/arch/arm/mach-s3c2410/s3c244x-irq.c
deleted file mode 100644
index ede9463..0000000
--- a/arch/arm/mach-s3c2410/s3c244x-irq.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c244x-irq.c
- *
- * Copyright (c) 2003,2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/ptrace.h>
-#include <linux/sysdev.h>
-
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-#include <asm/mach/irq.h>
-
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
-
-#include "cpu.h"
-#include "pm.h"
-#include "irq.h"
-
-/* camera irq */
-
-static void s3c_irq_demux_cam(unsigned int irq,
-			      struct irq_desc *desc)
-{
-	unsigned int subsrc, submsk;
-	struct irq_desc *mydesc;
-
-	/* read the current pending interrupts, and the mask
-	 * for what it is available */
-
-	subsrc = __raw_readl(S3C2410_SUBSRCPND);
-	submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-	subsrc &= ~submsk;
-	subsrc >>= 11;
-	subsrc &= 3;
-
-	if (subsrc != 0) {
-		if (subsrc & 1) {
-			mydesc = irq_desc + IRQ_S3C2440_CAM_C;
-			desc_handle_irq(IRQ_S3C2440_CAM_C, mydesc);
-		}
-		if (subsrc & 2) {
-			mydesc = irq_desc + IRQ_S3C2440_CAM_P;
-			desc_handle_irq(IRQ_S3C2440_CAM_P, mydesc);
-		}
-	}
-}
-
-#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
-
-static void
-s3c_irq_cam_mask(unsigned int irqno)
-{
-	s3c_irqsub_mask(irqno, INTMSK_CAM, 3<<11);
-}
-
-static void
-s3c_irq_cam_unmask(unsigned int irqno)
-{
-	s3c_irqsub_unmask(irqno, INTMSK_CAM);
-}
-
-static void
-s3c_irq_cam_ack(unsigned int irqno)
-{
-	s3c_irqsub_maskack(irqno, INTMSK_CAM, 3<<11);
-}
-
-static struct irq_chip s3c_irq_cam = {
-	.mask	    = s3c_irq_cam_mask,
-	.unmask	    = s3c_irq_cam_unmask,
-	.ack	    = s3c_irq_cam_ack,
-};
-
-static int s3c244x_irq_add(struct sys_device *sysdev)
-{
-	unsigned int irqno;
-
-	set_irq_chip(IRQ_NFCON, &s3c_irq_level_chip);
-	set_irq_handler(IRQ_NFCON, handle_level_irq);
-	set_irq_flags(IRQ_NFCON, IRQF_VALID);
-
-	/* add chained handler for camera */
-
-	set_irq_chip(IRQ_CAM, &s3c_irq_level_chip);
-	set_irq_handler(IRQ_CAM, handle_level_irq);
-	set_irq_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
-
-	for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
-		set_irq_chip(irqno, &s3c_irq_cam);
-		set_irq_handler(irqno, handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	return 0;
-}
-
-static struct sysdev_driver s3c2440_irq_driver = {
-	.add		= s3c244x_irq_add,
-	.suspend	= s3c24xx_irq_suspend,
-	.resume		= s3c24xx_irq_resume,
-};
-
-static int s3c2440_irq_init(void)
-{
-	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_irq_driver);
-}
-
-arch_initcall(s3c2440_irq_init);
-
-static struct sysdev_driver s3c2442_irq_driver = {
-	.add		= s3c244x_irq_add,
-	.suspend	= s3c24xx_irq_suspend,
-	.resume		= s3c24xx_irq_resume,
-};
-
-
-static int s3c2442_irq_init(void)
-{
-	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_irq_driver);
-}
-
-arch_initcall(s3c2442_irq_init);
diff --git a/arch/arm/mach-s3c2410/s3c244x.c b/arch/arm/mach-s3c2410/s3c244x.c
deleted file mode 100644
index 23c7494..0000000
--- a/arch/arm/mach-s3c2410/s3c244x.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c244x.c
- *
- * Copyright (c) 2004-2006 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C2440 and S3C2442 Mobile CPU support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/sysdev.h>
-#include <linux/clk.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-gpioj.h>
-#include <asm/arch/regs-dsc.h>
-
-#include "s3c2410.h"
-#include "s3c2440.h"
-#include "s3c244x.h"
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
-#include "pm.h"
-
-static struct map_desc s3c244x_iodesc[] __initdata = {
-	IODESC_ENT(CLKPWR),
-	IODESC_ENT(TIMER),
-	IODESC_ENT(WATCHDOG),
-	IODESC_ENT(LCD),
-};
-
-/* uart initialisation */
-
-void __init s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
-}
-
-void __init s3c244x_map_io(struct map_desc *mach_desc, int size)
-{
-	/* register our io-tables */
-
-	iotable_init(s3c244x_iodesc, ARRAY_SIZE(s3c244x_iodesc));
-	iotable_init(mach_desc, size);
-
-	/* rename any peripherals used differing from the s3c2410 */
-
-	s3c_device_i2c.name  = "s3c2440-i2c";
-	s3c_device_nand.name = "s3c2440-nand";
-	s3c_device_usbgadget.name = "s3c2440-usbgadget";
-}
-
-void __init s3c244x_init_clocks(int xtal)
-{
-	unsigned long clkdiv;
-	unsigned long camdiv;
-	unsigned long hclk, fclk, pclk;
-	int hdiv = 1;
-
-	/* now we've got our machine bits initialised, work out what
-	 * clocks we've got */
-
-	fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
-
-	clkdiv = __raw_readl(S3C2410_CLKDIVN);
-	camdiv = __raw_readl(S3C2440_CAMDIVN);
-
-	/* work out clock scalings */
-
-	switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) {
-	case S3C2440_CLKDIVN_HDIVN_1:
-		hdiv = 1;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_2:
-		hdiv = 2;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_4_8:
-		hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_3_6:
-		hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3;
-		break;
-	}
-
-	hclk = fclk / hdiv;
-	pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN)? 2:1);
-
-	/* print brief summary of clocks, etc */
-
-	printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
-	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
-	/* initialise the clocks here, to allow other things like the
-	 * console to use them, and to add new ones after the initialisation
-	 */
-
-	s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
-	s3c2410_baseclk_add();
-}
-
-#ifdef CONFIG_PM
-
-static struct sleep_save s3c244x_sleep[] = {
-	SAVE_ITEM(S3C2440_DSC0),
-	SAVE_ITEM(S3C2440_DSC1),
-	SAVE_ITEM(S3C2440_GPJDAT),
-	SAVE_ITEM(S3C2440_GPJCON),
-	SAVE_ITEM(S3C2440_GPJUP)
-};
-
-static int s3c244x_suspend(struct sys_device *dev, pm_message_t state)
-{
-	s3c2410_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
-	return 0;
-}
-
-static int s3c244x_resume(struct sys_device *dev)
-{
-	s3c2410_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
-	return 0;
-}
-
-#else
-#define s3c244x_suspend NULL
-#define s3c244x_resume  NULL
-#endif
-
-/* Since the S3C2442 and S3C2440 share  items, put both sysclasses here */
-
-struct sysdev_class s3c2440_sysclass = {
-	set_kset_name("s3c2440-core"),
-	.suspend	= s3c244x_suspend,
-	.resume		= s3c244x_resume
-};
-
-struct sysdev_class s3c2442_sysclass = {
-	set_kset_name("s3c2442-core"),
-	.suspend	= s3c244x_suspend,
-	.resume		= s3c244x_resume
-};
-
-/* need to register class before we actually register the device, and
- * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2440 based system)
- * as a driver which may support both 2410 and 2440 may try and use it.
-*/
-
-static int __init s3c2440_core_init(void)
-{
-	return sysdev_class_register(&s3c2440_sysclass);
-}
-
-core_initcall(s3c2440_core_init);
-
-static int __init s3c2442_core_init(void)
-{
-	return sysdev_class_register(&s3c2442_sysclass);
-}
-
-core_initcall(s3c2442_core_init);
diff --git a/arch/arm/mach-s3c2410/s3c244x.h b/arch/arm/mach-s3c2410/s3c244x.h
deleted file mode 100644
index 1488c1e..0000000
--- a/arch/arm/mach-s3c2410/s3c244x.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* arch/arm/mach-s3c2410/s3c244x.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C2440 and S3C2442 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-
-extern void s3c244x_map_io(struct map_desc *mach_desc, int size);
-
-extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c244x_init_clocks(int xtal);
-
-#else
-#define s3c244x_init_clocks NULL
-#define s3c244x_init_uarts NULL
-#define s3c244x_map_io NULL
-#endif
diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S
index 2018c2e..9179a10 100644
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/sleep.S
+/* linux/arch/arm/mach-s3c2410/s3c2410-sleep.S
  *
  * Copyright (c) 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -34,126 +34,35 @@
 #include <asm/arch/regs-mem.h>
 #include <asm/arch/regs-serial.h>
 
-/* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
- * reset the UART configuration, only enable if you really need this!
-*/
-//#define CONFIG_DEBUG_RESUME
-
-	.text
-
-	/* s3c2410_cpu_save
-	 *
-	 * save enough of the CPU state to allow us to re-start
-	 * pm.c code. as we store items like the sp/lr, we will
-	 * end up returning from this function when the cpu resumes
-	 * so the return value is set to mark this.
-	 *
-	 * This arangement means we avoid having to flush the cache
-	 * from this code.
-	 *
-	 * entry:
-	 *	r0 = pointer to save block
-	 *
-	 * exit:
-	 *	r0 = 0 => we stored everything
-	 *	     1 => resumed from sleep
-	*/
-
-ENTRY(s3c2410_cpu_save)
-	stmfd	sp!, { r4 - r12, lr }
-
-	@@ store co-processor registers
-
-	mrc	p15, 0, r4, c15, c1, 0	@ CP access register
-	mrc	p15, 0, r5, c13, c0, 0	@ PID
-	mrc	p15, 0, r6, c3, c0, 0	@ Domain ID
-	mrc	p15, 0, r7, c2, c0, 0	@ translation table base address
-	mrc	p15, 0, r8, c1, c0, 0	@ control register
-
-	stmia	r0, { r4 - r13 }
-
-	mov	r0, #0
-	ldmfd	sp, { r4 - r12, pc }
-
-	@@ return to the caller, after having the MMU
-	@@ turned on, this restores the last bits from the
-	@@ stack
-resume_with_mmu:
-	mov	r0, #1
-	ldmfd	sp!, { r4 - r12, pc }
-
-	.ltorg
-
-	@@ the next bits sit in the .data segment, even though they
-	@@ happen to be code... the s3c2410_sleep_save_phys needs to be
-	@@ accessed by the resume code before it can restore the MMU.
-	@@ This means that the variable has to be close enough for the
-	@@ code to read it... since the .text segment needs to be RO,
-	@@ the data segment can be the only place to put this code.
-
-	.data
-
-	.global	s3c2410_sleep_save_phys
-s3c2410_sleep_save_phys:
-	.word	0
-
-	/* s3c2410_cpu_resume
+	/* s3c2410_cpu_suspend
 	 *
-	 * resume code entry for bootloader to call
-	 *
-	 * we must put this code here in the data segment as we have no
-	 * other way of restoring the stack pointer after sleep, and we
-	 * must not write to the code segment (code is read-only)
+	 * put the cpu into sleep mode
 	*/
 
-ENTRY(s3c2410_cpu_resume)
-	mov	r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
-	msr	cpsr_c, r0
-
-	@@ load UART to allow us to print the two characters for
-	@@ resume debug
-
-	mov	r2, #S3C24XX_PA_UART & 0xff000000
-	orr	r2, r2, #S3C24XX_PA_UART & 0xff000
-
-#if 0
-	/* SMDK2440 LED set */
-	mov	r14, #S3C24XX_PA_GPIO
-	ldr	r12, [ r14, #0x54 ]
-	bic	r12, r12, #3<<4
-	orr	r12, r12, #1<<7
-	str	r12, [ r14, #0x54 ]
-#endif
-
-#ifdef CONFIG_DEBUG_RESUME
-	mov	r3, #'L'
-	strb	r3, [ r2, #S3C2410_UTXH ]
-1001:
-	ldrb	r14, [ r3, #S3C2410_UTRSTAT ]
-	tst	r14, #S3C2410_UTRSTAT_TXE
-	beq	1001b
-#endif /* CONFIG_DEBUG_RESUME */
-
-	mov	r1, #0
-	mcr	p15, 0, r1, c8, c7, 0		@@ invalidate I & D TLBs
-	mcr	p15, 0, r1, c7, c7, 0		@@ invalidate I & D caches
-
-	ldr	r0, s3c2410_sleep_save_phys	@ address of restore block
-	ldmia	r0, { r4 - r13 }
-
-	mcr	p15, 0, r4, c15, c1, 0		@ CP access register
-	mcr	p15, 0, r5, c13, c0, 0		@ PID
-	mcr	p15, 0, r6, c3, c0, 0		@ Domain ID
-	mcr	p15, 0, r7, c2, c0, 0		@ translation table base
-
-#ifdef CONFIG_DEBUG_RESUME
-	mov	r3, #'R'
-	strb	r3, [ r2, #S3C2410_UTXH ]
-#endif
-
-	ldr	r2, =resume_with_mmu
-	mcr	p15, 0, r8, c1, c0, 0		@ turn on MMU, etc
-	nop					@ second-to-last before mmu
-	mov	pc, r2				@ go back to virtual address
-
-	.ltorg
+ENTRY(s3c2410_cpu_suspend)
+	@@ prepare cpu to sleep
+
+	ldr	r4, =S3C2410_REFRESH
+	ldr	r5, =S3C24XX_MISCCR
+	ldr	r6, =S3C2410_CLKCON
+	ldr	r7, [ r4 ]		@ get REFRESH (and ensure in TLB)
+	ldr	r8, [ r5 ]		@ get MISCCR (and ensure in TLB)
+	ldr	r9, [ r6 ]		@ get CLKCON (and ensure in TLB)
+
+	orr	r7, r7, #S3C2410_REFRESH_SELF	@ SDRAM sleep command
+	orr	r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
+	orr	r9, r9, #S3C2410_CLKCON_POWER	@ power down command
+
+	teq	pc, #0			@ first as a trial-run to load cache
+	bl	s3c2410_do_sleep
+	teq	r0, r0			@ now do it for real
+	b	s3c2410_do_sleep	@
+
+	@@ align next bit of code to cache line
+	.align	8
+s3c2410_do_sleep:
+	streq	r7, [ r4 ]			@ SDRAM sleep command
+	streq	r8, [ r5 ]			@ SDRAM power-down config
+	streq	r9, [ r6 ]			@ CPU sleep
+1:	beq	1b
+	mov	pc, r14
diff --git a/arch/arm/mach-s3c2410/time.c b/arch/arm/mach-s3c2410/time.c
deleted file mode 100644
index 9910bf0..0000000
--- a/arch/arm/mach-s3c2410/time.c
+++ /dev/null
@@ -1,262 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/time.c
- *
- * Copyright (C) 2003-2005 Simtec Electronics
- *	Ben Dooks, <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-
-#include <asm/system.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/arch/map.h>
-#include <asm/arch/regs-timer.h>
-#include <asm/arch/regs-irq.h>
-#include <asm/mach/time.h>
-
-#include "clock.h"
-#include "cpu.h"
-
-static unsigned long timer_startval;
-static unsigned long timer_usec_ticks;
-
-#define TIMER_USEC_SHIFT 16
-
-/* we use the shifted arithmetic to work out the ratio of timer ticks
- * to usecs, as often the peripheral clock is not a nice even multiple
- * of 1MHz.
- *
- * shift of 14 and 15 are too low for the 12MHz, 16 seems to be ok
- * for the current HZ value of 200 without producing overflows.
- *
- * Original patch by Dimitry Andric, updated by Ben Dooks
-*/
-
-
-/* timer_mask_usec_ticks
- *
- * given a clock and divisor, make the value to pass into timer_ticks_to_usec
- * to scale the ticks into usecs
-*/
-
-static inline unsigned long
-timer_mask_usec_ticks(unsigned long scaler, unsigned long pclk)
-{
-	unsigned long den = pclk / 1000;
-
-	return ((1000 << TIMER_USEC_SHIFT) * scaler + (den >> 1)) / den;
-}
-
-/* timer_ticks_to_usec
- *
- * convert timer ticks to usec.
-*/
-
-static inline unsigned long timer_ticks_to_usec(unsigned long ticks)
-{
-	unsigned long res;
-
-	res = ticks * timer_usec_ticks;
-	res += 1 << (TIMER_USEC_SHIFT - 4);	/* round up slightly */
-
-	return res >> TIMER_USEC_SHIFT;
-}
-
-/***
- * Returns microsecond  since last clock interrupt.  Note that interrupts
- * will have been disabled by do_gettimeoffset()
- * IRQs are disabled before entering here from do_gettimeofday()
- */
-
-#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0))
-
-static unsigned long s3c2410_gettimeoffset (void)
-{
-	unsigned long tdone;
-	unsigned long irqpend;
-	unsigned long tval;
-
-	/* work out how many ticks have gone since last timer interrupt */
-
-        tval =  __raw_readl(S3C2410_TCNTO(4));
-	tdone = timer_startval - tval;
-
-	/* check to see if there is an interrupt pending */
-
-	irqpend = __raw_readl(S3C2410_SRCPND);
-	if (irqpend & SRCPND_TIMER4) {
-		/* re-read the timer, and try and fix up for the missed
-		 * interrupt. Note, the interrupt may go off before the
-		 * timer has re-loaded from wrapping.
-		 */
-
-		tval =  __raw_readl(S3C2410_TCNTO(4));
-		tdone = timer_startval - tval;
-
-		if (tval != 0)
-			tdone += timer_startval;
-	}
-
-	return timer_ticks_to_usec(tdone);
-}
-
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-s3c2410_timer_interrupt(int irq, void *dev_id)
-{
-	write_seqlock(&xtime_lock);
-	timer_tick();
-	write_sequnlock(&xtime_lock);
-	return IRQ_HANDLED;
-}
-
-static struct irqaction s3c2410_timer_irq = {
-	.name		= "S3C2410 Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
-	.handler	= s3c2410_timer_interrupt,
-};
-
-#define use_tclk1_12() ( \
-	machine_is_bast()	|| \
-	machine_is_vr1000()	|| \
-	machine_is_anubis()	|| \
-	machine_is_osiris() )
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- *
- * Currently we only use timer4, as it is the only timer which has no
- * other function that can be exploited externally
- */
-static void s3c2410_timer_setup (void)
-{
-	unsigned long tcon;
-	unsigned long tcnt;
-	unsigned long tcfg1;
-	unsigned long tcfg0;
-
-	tcnt = 0xffff;  /* default value for tcnt */
-
-	/* read the current timer configuration bits */
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcfg1 = __raw_readl(S3C2410_TCFG1);
-	tcfg0 = __raw_readl(S3C2410_TCFG0);
-
-	/* configure the system for whichever machine is in use */
-
-	if (use_tclk1_12()) {
-		/* timer is at 12MHz, scaler is 1 */
-		timer_usec_ticks = timer_mask_usec_ticks(1, 12000000);
-		tcnt = 12000000 / HZ;
-
-		tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
-		tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1;
-	} else {
-		unsigned long pclk;
-		struct clk *clk;
-
-		/* for the h1940 (and others), we use the pclk from the core
-		 * to generate the timer values. since values around 50 to
-		 * 70MHz are not values we can directly generate the timer
-		 * value from, we need to pre-scale and divide before using it.
-		 *
-		 * for instance, using 50.7MHz and dividing by 6 gives 8.45MHz
-		 * (8.45 ticks per usec)
-		 */
-
-		/* this is used as default if no other timer can be found */
-
-		clk = clk_get(NULL, "timers");
-		if (IS_ERR(clk))
-			panic("failed to get clock for system timer");
-
-		clk_enable(clk);
-
-		pclk = clk_get_rate(clk);
-
-		/* configure clock tick */
-
-		timer_usec_ticks = timer_mask_usec_ticks(6, pclk);
-
-		tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
-		tcfg1 |= S3C2410_TCFG1_MUX4_DIV2;
-
-		tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
-		tcfg0 |= ((6 - 1) / 2) << S3C2410_TCFG_PRESCALER1_SHIFT;
-
-		tcnt = (pclk / 6) / HZ;
-	}
-
-	/* timers reload after counting zero, so reduce the count by 1 */
-
-	tcnt--;
-
-	printk("timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n",
-	       tcon, tcnt, tcfg0, tcfg1, timer_usec_ticks);
-
-	/* check to see if timer is within 16bit range... */
-	if (tcnt > 0xffff) {
-		panic("setup_timer: HZ is too small, cannot configure timer!");
-		return;
-	}
-
-	__raw_writel(tcfg1, S3C2410_TCFG1);
-	__raw_writel(tcfg0, S3C2410_TCFG0);
-
-	timer_startval = tcnt;
-	__raw_writel(tcnt, S3C2410_TCNTB(4));
-
-	/* ensure timer is stopped... */
-
-	tcon &= ~(7<<20);
-	tcon |= S3C2410_TCON_T4RELOAD;
-	tcon |= S3C2410_TCON_T4MANUALUPD;
-
-	__raw_writel(tcon, S3C2410_TCON);
-	__raw_writel(tcnt, S3C2410_TCNTB(4));
-	__raw_writel(tcnt, S3C2410_TCMPB(4));
-
-	/* start the timer running */
-	tcon |= S3C2410_TCON_T4START;
-	tcon &= ~S3C2410_TCON_T4MANUALUPD;
-	__raw_writel(tcon, S3C2410_TCON);
-}
-
-static void __init s3c2410_timer_init (void)
-{
-	s3c2410_timer_setup();
-	setup_irq(IRQ_TIMER4, &s3c2410_timer_irq);
-}
-
-struct sys_timer s3c24xx_timer = {
-	.init		= s3c2410_timer_init,
-	.offset		= s3c2410_gettimeoffset,
-	.resume		= s3c2410_timer_setup
-};
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 22b0e1c..bcd562a 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -35,7 +35,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include "devs.h"
+#include <asm/plat-s3c24xx/devs.h>
 #include "usb-simtec.h"
 
 /* control power and monitor over-current events on various Simtec
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
new file mode 100644
index 0000000..6d629de84
--- /dev/null
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -0,0 +1,58 @@
+# arch/arm/mach-s3c2412/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config CPU_S3C2412
+	bool
+	depends on ARCH_S3C2410
+	select S3C2412_PM if PM
+	select S3C2412_DMA if S3C2410_DMA
+	help
+	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
+
+config CPU_S3C2412_ONLY
+	bool
+	depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
+		   !CPU_S3C2440 && !CPU_S3C2442 && CPU_S3C2412
+	default y if CPU_S3C2412
+
+config S3C2412_DMA
+	bool
+	depends on CPU_S3C2412
+	help
+	  Internal config node for S3C2412 DMA support
+
+config S3C2412_PM
+	bool
+	help
+	  Internal config node to apply S3C2412 power management
+
+
+menu "S3C2412 Machines"
+
+config MACH_SMDK2413
+	bool "SMDK2413"
+	select CPU_S3C2412
+	select MACH_S3C2413
+	select MACH_SMDK
+	help
+	  Say Y here if you are using an SMDK2413
+
+config MACH_S3C2413
+	bool
+	help
+	  Internal node for S3C2413 version of SMDK2413, so that
+	  machine_is_s3c2413() will work when MACH_SMDK2413 is
+	  selected
+
+config MACH_VSTMS
+	bool "VMSTMS"
+	select CPU_S3C2412
+	help
+	  Say Y here if you are using an VSTMS board
+
+
+endmenu
+
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
new file mode 100644
index 0000000..f8e0116
--- /dev/null
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -0,0 +1,21 @@
+# arch/arm/mach-s3c2412/Makefile
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o
+obj-$(CONFIG_CPU_S3C2412)	+= irq.o
+obj-$(CONFIG_CPU_S3C2412)	+= clock.o
+obj-$(CONFIG_S3C2412_DMA)	+= dma.o
+obj-$(CONFIG_S3C2412_PM)	+= pm.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_SMDK2413)	+= mach-smdk2413.o
+obj-$(CONFIG_MACH_VSTMS)	+= mach-vstms.o
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
new file mode 100644
index 0000000..6a8e444
--- /dev/null
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -0,0 +1,716 @@
+/* linux/arch/arm/mach-s3c2412/clock.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412,S3C2413 Clock control support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/map.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-clock.h>
+#include <asm/arch/regs-gpio.h>
+
+#include <asm/plat-s3c24xx/s3c2412.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+/* We currently have to assume that the system is running
+ * from the XTPll input, and that all ***REFCLKs are being
+ * fed from it, as we cannot read the state of OM[4] from
+ * software.
+ *
+ * It would be possible for each board initialisation to
+ * set the correct muxing at initialisation
+*/
+
+static int s3c2412_clkcon_enable(struct clk *clk, int enable)
+{
+	unsigned int clocks = clk->ctrlbit;
+	unsigned long clkcon;
+
+	clkcon = __raw_readl(S3C2410_CLKCON);
+
+	if (enable)
+		clkcon |= clocks;
+	else
+		clkcon &= ~clocks;
+
+	__raw_writel(clkcon, S3C2410_CLKCON);
+
+	return 0;
+}
+
+static int s3c2412_upll_enable(struct clk *clk, int enable)
+{
+	unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
+	unsigned long orig = upllcon;
+
+	if (!enable)
+		upllcon |= S3C2412_PLLCON_OFF;
+	else
+		upllcon &= ~S3C2412_PLLCON_OFF;
+
+	__raw_writel(upllcon, S3C2410_UPLLCON);
+
+	/* allow ~150uS for the PLL to settle and lock */
+
+	if (enable && (orig & S3C2412_PLLCON_OFF))
+		udelay(150);
+
+	return 0;
+}
+
+/* clock selections */
+
+/* CPU EXTCLK input */
+static struct clk clk_ext = {
+	.name		= "extclk",
+	.id		= -1,
+};
+
+static struct clk clk_erefclk = {
+	.name		= "erefclk",
+	.id		= -1,
+};
+
+static struct clk clk_urefclk = {
+	.name		= "urefclk",
+	.id		= -1,
+};
+
+static int s3c2412_setparent_usysclk(struct clk *clk, struct clk *parent)
+{
+	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
+
+	if (parent == &clk_urefclk)
+		clksrc &= ~S3C2412_CLKSRC_USYSCLK_UPLL;
+	else if (parent == &clk_upll)
+		clksrc |= S3C2412_CLKSRC_USYSCLK_UPLL;
+	else
+		return -EINVAL;
+
+	clk->parent = parent;
+
+	__raw_writel(clksrc, S3C2412_CLKSRC);
+	return 0;
+}
+
+static struct clk clk_usysclk = {
+	.name		= "usysclk",
+	.id		= -1,
+	.parent		= &clk_xtal,
+	.set_parent	= s3c2412_setparent_usysclk,
+};
+
+static struct clk clk_mrefclk = {
+	.name		= "mrefclk",
+	.parent		= &clk_xtal,
+	.id		= -1,
+};
+
+static struct clk clk_mdivclk = {
+	.name		= "mdivclk",
+	.parent		= &clk_xtal,
+	.id		= -1,
+};
+
+static int s3c2412_setparent_usbsrc(struct clk *clk, struct clk *parent)
+{
+	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
+
+	if (parent == &clk_usysclk)
+		clksrc &= ~S3C2412_CLKSRC_USBCLK_HCLK;
+	else if (parent == &clk_h)
+		clksrc |= S3C2412_CLKSRC_USBCLK_HCLK;
+	else
+		return -EINVAL;
+
+	clk->parent = parent;
+
+	__raw_writel(clksrc, S3C2412_CLKSRC);
+	return 0;
+}
+
+static unsigned long s3c2412_roundrate_usbsrc(struct clk *clk,
+					      unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	int div;
+
+	if (rate > parent_rate)
+		return parent_rate;
+
+	div = parent_rate / rate;
+	if (div > 2)
+		div = 2;
+
+	return parent_rate / div;
+}
+
+static unsigned long s3c2412_getrate_usbsrc(struct clk *clk)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
+
+	return parent_rate / ((div & S3C2412_CLKDIVN_USB48DIV) ? 2 : 1);
+}
+
+static int s3c2412_setrate_usbsrc(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
+
+	rate = s3c2412_roundrate_usbsrc(clk, rate);
+
+	if ((parent_rate / rate) == 2)
+		clkdivn |= S3C2412_CLKDIVN_USB48DIV;
+	else
+		clkdivn &= ~S3C2412_CLKDIVN_USB48DIV;
+
+	__raw_writel(clkdivn, S3C2410_CLKDIVN);
+	return 0;
+}
+
+static struct clk clk_usbsrc = {
+	.name		= "usbsrc",
+	.id		= -1,
+	.get_rate	= s3c2412_getrate_usbsrc,
+	.set_rate	= s3c2412_setrate_usbsrc,
+	.round_rate	= s3c2412_roundrate_usbsrc,
+	.set_parent	= s3c2412_setparent_usbsrc,
+};
+
+static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent)
+{
+	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
+
+	if (parent == &clk_mdivclk)
+		clksrc &= ~S3C2412_CLKSRC_MSYSCLK_MPLL;
+	else if (parent == &clk_upll)
+		clksrc |= S3C2412_CLKSRC_MSYSCLK_MPLL;
+	else
+		return -EINVAL;
+
+	clk->parent = parent;
+
+	__raw_writel(clksrc, S3C2412_CLKSRC);
+	return 0;
+}
+
+static struct clk clk_msysclk = {
+	.name		= "msysclk",
+	.id		= -1,
+	.set_parent	= s3c2412_setparent_msysclk,
+};
+
+/* these next clocks have an divider immediately after them,
+ * so we can register them with their divider and leave out the
+ * intermediate clock stage
+*/
+static unsigned long s3c2412_roundrate_clksrc(struct clk *clk,
+					      unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	int div;
+
+	if (rate > parent_rate)
+		return parent_rate;
+
+	/* note, we remove the +/- 1 calculations as they cancel out */
+
+	div = (rate / parent_rate);
+
+	if (div < 1)
+		div = 1;
+	else if (div > 16)
+		div = 16;
+
+	return parent_rate / div;
+}
+
+static int s3c2412_setparent_uart(struct clk *clk, struct clk *parent)
+{
+	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
+
+	if (parent == &clk_erefclk)
+		clksrc &= ~S3C2412_CLKSRC_UARTCLK_MPLL;
+	else if (parent == &clk_mpll)
+		clksrc |= S3C2412_CLKSRC_UARTCLK_MPLL;
+	else
+		return -EINVAL;
+
+	clk->parent = parent;
+
+	__raw_writel(clksrc, S3C2412_CLKSRC);
+	return 0;
+}
+
+static unsigned long s3c2412_getrate_uart(struct clk *clk)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
+
+	div &= S3C2412_CLKDIVN_UARTDIV_MASK;
+	div >>= S3C2412_CLKDIVN_UARTDIV_SHIFT;
+
+	return parent_rate / (div + 1);
+}
+
+static int s3c2412_setrate_uart(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
+
+	rate = s3c2412_roundrate_clksrc(clk, rate);
+
+	clkdivn &= ~S3C2412_CLKDIVN_UARTDIV_MASK;
+	clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_UARTDIV_SHIFT;
+
+	__raw_writel(clkdivn, S3C2410_CLKDIVN);
+	return 0;
+}
+
+static struct clk clk_uart = {
+	.name		= "uartclk",
+	.id		= -1,
+	.get_rate	= s3c2412_getrate_uart,
+	.set_rate	= s3c2412_setrate_uart,
+	.set_parent	= s3c2412_setparent_uart,
+	.round_rate	= s3c2412_roundrate_clksrc,
+};
+
+static int s3c2412_setparent_i2s(struct clk *clk, struct clk *parent)
+{
+	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
+
+	if (parent == &clk_erefclk)
+		clksrc &= ~S3C2412_CLKSRC_I2SCLK_MPLL;
+	else if (parent == &clk_mpll)
+		clksrc |= S3C2412_CLKSRC_I2SCLK_MPLL;
+	else
+		return -EINVAL;
+
+	clk->parent = parent;
+
+	__raw_writel(clksrc, S3C2412_CLKSRC);
+	return 0;
+}
+
+static unsigned long s3c2412_getrate_i2s(struct clk *clk)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
+
+	div &= S3C2412_CLKDIVN_I2SDIV_MASK;
+	div >>= S3C2412_CLKDIVN_I2SDIV_SHIFT;
+
+	return parent_rate / (div + 1);
+}
+
+static int s3c2412_setrate_i2s(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
+
+	rate = s3c2412_roundrate_clksrc(clk, rate);
+
+	clkdivn &= ~S3C2412_CLKDIVN_I2SDIV_MASK;
+	clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_I2SDIV_SHIFT;
+
+	__raw_writel(clkdivn, S3C2410_CLKDIVN);
+	return 0;
+}
+
+static struct clk clk_i2s = {
+	.name		= "i2sclk",
+	.id		= -1,
+	.get_rate	= s3c2412_getrate_i2s,
+	.set_rate	= s3c2412_setrate_i2s,
+	.set_parent	= s3c2412_setparent_i2s,
+	.round_rate	= s3c2412_roundrate_clksrc,
+};
+
+static int s3c2412_setparent_cam(struct clk *clk, struct clk *parent)
+{
+	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
+
+	if (parent == &clk_usysclk)
+		clksrc &= ~S3C2412_CLKSRC_CAMCLK_HCLK;
+	else if (parent == &clk_h)
+		clksrc |= S3C2412_CLKSRC_CAMCLK_HCLK;
+	else
+		return -EINVAL;
+
+	clk->parent = parent;
+
+	__raw_writel(clksrc, S3C2412_CLKSRC);
+	return 0;
+}
+static unsigned long s3c2412_getrate_cam(struct clk *clk)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
+
+	div &= S3C2412_CLKDIVN_CAMDIV_MASK;
+	div >>= S3C2412_CLKDIVN_CAMDIV_SHIFT;
+
+	return parent_rate / (div + 1);
+}
+
+static int s3c2412_setrate_cam(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
+
+	rate = s3c2412_roundrate_clksrc(clk, rate);
+
+	clkdivn &= ~S3C2412_CLKDIVN_CAMDIV_MASK;
+	clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_CAMDIV_SHIFT;
+
+	__raw_writel(clkdivn, S3C2410_CLKDIVN);
+	return 0;
+}
+
+static struct clk clk_cam = {
+	.name		= "camif-upll",	/* same as 2440 name */
+	.id		= -1,
+	.get_rate	= s3c2412_getrate_cam,
+	.set_rate	= s3c2412_setrate_cam,
+	.set_parent	= s3c2412_setparent_cam,
+	.round_rate	= s3c2412_roundrate_clksrc,
+};
+
+/* standard clock definitions */
+
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "nand",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2412_clkcon_enable,
+		.ctrlbit	= S3C2412_CLKCON_NAND,
+	}, {
+		.name		= "sdi",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2412_clkcon_enable,
+		.ctrlbit	= S3C2412_CLKCON_SDI,
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2412_clkcon_enable,
+		.ctrlbit	= S3C2412_CLKCON_ADC,
+	}, {
+		.name		= "i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2412_clkcon_enable,
+		.ctrlbit	= S3C2412_CLKCON_IIC,
+	}, {
+		.name		= "iis",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2412_clkcon_enable,
+		.ctrlbit	= S3C2412_CLKCON_IIS,
+	}, {
+		.name		= "spi",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2412_clkcon_enable,
+		.ctrlbit	= S3C2412_CLKCON_SPI,
+	}
+};
+
+static struct clk init_clocks[] = {
+	{
+		.name		= "dma",
+		.id		= 0,
+		.parent		= &clk_h,
+		.enable		= s3c2412_clkcon_enable,
+		.ctrlbit	= S3C2412_CLKCON_DMA0,
+	}, {
+		.name		= "dma",
+		.id		= 1,
+		.parent		= &clk_h,
+		.enable		= s3c2412_clkcon_enable,
+		.ctrlbit	= S3C2412_CLKCON_DMA1,
+	}, {
+		.name		= "dma",
+		.id		= 2,
+		.parent		= &clk_h,
+		.enable		= s3c2412_clkcon_enable,
+		.ctrlbit	= S3C2412_CLKCON_DMA2,
+	}, {
+		.name		= "dma",
+		.id		= 3,
+		.parent		= &clk_h,
+		.enable		= s3c2412_clkcon_enable,
+		.ctrlbit	= S3C2412_CLKCON_DMA3,
+	}, {
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2412_clkcon_enable,
+		.ctrlbit	= S3C2412_CLKCON_LCDC,
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2412_clkcon_enable,
+		.ctrlbit	= S3C2412_CLKCON_GPIO,
+	}, {
+		.name		= "usb-host",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2412_clkcon_enable,
+		.ctrlbit	= S3C2412_CLKCON_USBH,
+	}, {
+		.name		= "usb-device",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2412_clkcon_enable,
+		.ctrlbit	= S3C2412_CLKCON_USBD,
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2412_clkcon_enable,
+		.ctrlbit	= S3C2412_CLKCON_PWMT,
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s3c2412_clkcon_enable,
+		.ctrlbit	= S3C2412_CLKCON_UART0,
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s3c2412_clkcon_enable,
+		.ctrlbit	= S3C2412_CLKCON_UART1,
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s3c2412_clkcon_enable,
+		.ctrlbit	= S3C2412_CLKCON_UART2,
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2412_clkcon_enable,
+		.ctrlbit	= S3C2412_CLKCON_RTC,
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_p,
+		.ctrlbit	= 0,
+	}, {
+		.name		= "usb-bus-gadget",
+		.id		= -1,
+		.parent		= &clk_usb_bus,
+		.enable		= s3c2412_clkcon_enable,
+		.ctrlbit	= S3C2412_CLKCON_USB_DEV48,
+	}, {
+		.name		= "usb-bus-host",
+		.id		= -1,
+		.parent		= &clk_usb_bus,
+		.enable		= s3c2412_clkcon_enable,
+		.ctrlbit	= S3C2412_CLKCON_USB_HOST48,
+	}
+};
+
+/* clocks to add where we need to check their parentage */
+
+struct clk_init {
+	struct clk	*clk;
+	unsigned int	 bit;
+	struct clk	*src_0;
+	struct clk	*src_1;
+};
+
+static struct clk_init clks_src[] __initdata = {
+	{
+		.clk	= &clk_usysclk,
+		.bit	= S3C2412_CLKSRC_USBCLK_HCLK,
+		.src_0	= &clk_urefclk,
+		.src_1	= &clk_upll,
+	}, {
+		.clk	= &clk_i2s,
+		.bit	= S3C2412_CLKSRC_I2SCLK_MPLL,
+		.src_0	= &clk_erefclk,
+		.src_1	= &clk_mpll,
+	}, {
+		.clk	= &clk_cam,
+		.bit	= S3C2412_CLKSRC_CAMCLK_HCLK,
+		.src_0	= &clk_usysclk,
+		.src_1	= &clk_h,
+	}, {
+		.clk	= &clk_msysclk,
+		.bit	= S3C2412_CLKSRC_MSYSCLK_MPLL,
+		.src_0	= &clk_mdivclk,
+		.src_1	= &clk_mpll,
+	}, {
+		.clk	= &clk_uart,
+		.bit	= S3C2412_CLKSRC_UARTCLK_MPLL,
+		.src_0	= &clk_erefclk,
+		.src_1	= &clk_mpll,
+	}, {
+		.clk	= &clk_usbsrc,
+		.bit	= S3C2412_CLKSRC_USBCLK_HCLK,
+		.src_0	= &clk_usysclk,
+		.src_1	= &clk_h,
+	},
+};
+
+/* s3c2412_clk_initparents
+ *
+ * Initialise the parents for the clocks that we get at start-time
+*/
+
+static void __init s3c2412_clk_initparents(void)
+{
+	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
+	struct clk_init *cip = clks_src;
+	struct clk *src;
+	int ptr;
+	int ret;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clks_src); ptr++, cip++) {
+		ret = s3c24xx_register_clock(cip->clk);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       cip->clk->name, ret);
+		}
+
+		src = (clksrc & cip->bit) ? cip->src_1 : cip->src_0;
+
+		printk(KERN_INFO "%s: parent %s\n", cip->clk->name, src->name);
+		clk_set_parent(cip->clk, src);
+	}
+}
+
+/* clocks to add straight away */
+
+static struct clk *clks[] __initdata = {
+	&clk_ext,
+	&clk_usb_bus,
+	&clk_erefclk,
+	&clk_urefclk,
+	&clk_mrefclk,
+};
+
+int __init s3c2412_baseclk_add(void)
+{
+	unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	clk_upll.enable = s3c2412_upll_enable;
+	clk_usb_bus.parent = &clk_usbsrc;
+	clk_usb_bus.rate = 0x0;
+
+	s3c2412_clk_initparents();
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
+		clkp = clks[ptr];
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+	}
+
+	/* ensure usb bus clock is within correct rate of 48MHz */
+
+	if (clk_get_rate(&clk_usb_bus) != (48 * 1000 * 1000)) {
+		printk(KERN_INFO "Warning: USB bus clock not at 48MHz\n");
+
+		/* for the moment, let's use the UPLL, and see if we can
+		 * get 48MHz */
+
+		clk_set_parent(&clk_usysclk, &clk_upll);
+		clk_set_parent(&clk_usbsrc, &clk_usysclk);
+		clk_set_rate(&clk_usbsrc, 48*1000*1000);
+	}
+
+	printk("S3C2412: upll %s, %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
+	       (__raw_readl(S3C2410_UPLLCON) & S3C2412_PLLCON_OFF) ? "off":"on",
+	       print_mhz(clk_get_rate(&clk_upll)),
+	       print_mhz(clk_get_rate(&clk_usb_bus)));
+
+	/* register clocks from clock array */
+
+	clkp = init_clocks;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+		/* ensure that we note the clock state */
+
+		clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+	}
+
+	/* We must be careful disabling the clocks we are not intending to
+	 * be using at boot time, as subsytems such as the LCD which do
+	 * their own DMA requests to the bus can cause the system to lockup
+	 * if they where in the middle of requesting bus access.
+	 *
+	 * Disabling the LCD clock if the LCD is active is very dangerous,
+	 * and therefore the bootloader should be careful to not enable
+	 * the LCD clock if it is not needed.
+	*/
+
+	/* install (and disable) the clocks we do not need immediately */
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+
+		s3c2412_clkcon_enable(clkp, 0);
+	}
+
+	return 0;
+}
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
new file mode 100644
index 0000000..28b5982
--- /dev/null
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -0,0 +1,161 @@
+/* linux/arch/arm/mach-s3c2412/dma.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412 DMA selection
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+
+#include <asm/dma.h>
+#include <asm/arch/dma.h>
+#include <asm/io.h>
+
+#include <asm/plat-s3c24xx/dma.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-ac97.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/regs-sdi.h>
+#include <asm/arch/regs-iis.h>
+#include <asm/arch/regs-spi.h>
+
+#define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID }
+
+static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = {
+	[DMACH_XD0] = {
+		.name		= "xdreq0",
+		.channels	= MAP(S3C2412_DMAREQSEL_XDREQ0),
+	},
+	[DMACH_XD1] = {
+		.name		= "xdreq1",
+		.channels	= MAP(S3C2412_DMAREQSEL_XDREQ1),
+	},
+	[DMACH_SDI] = {
+		.name		= "sdi",
+		.channels	= MAP(S3C2412_DMAREQSEL_SDI),
+		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_SPI0] = {
+		.name		= "spi0",
+		.channels	= MAP(S3C2412_DMAREQSEL_SPI0TX),
+		.hw_addr.to	= S3C2410_PA_SPI + S3C2410_SPTDAT,
+		.hw_addr.from	= S3C2410_PA_SPI + S3C2410_SPRDAT,
+	},
+	[DMACH_SPI1] = {
+		.name		= "spi1",
+		.channels	= MAP(S3C2412_DMAREQSEL_SPI1TX),
+		.hw_addr.to	= S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
+		.hw_addr.from	= S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
+	},
+	[DMACH_UART0] = {
+		.name		= "uart0",
+		.channels	= MAP(S3C2412_DMAREQSEL_UART0_0),
+		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
+	},
+	[DMACH_UART1] = {
+		.name		= "uart1",
+		.channels	= MAP(S3C2412_DMAREQSEL_UART1_0),
+		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
+	},
+      	[DMACH_UART2] = {
+		.name		= "uart2",
+		.channels	= MAP(S3C2412_DMAREQSEL_UART2_0),
+		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
+	},
+	[DMACH_UART0_SRC2] = {
+		.name		= "uart0",
+		.channels	= MAP(S3C2412_DMAREQSEL_UART0_1),
+		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
+	},
+	[DMACH_UART1_SRC2] = {
+		.name		= "uart1",
+		.channels	= MAP(S3C2412_DMAREQSEL_UART1_1),
+		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
+	},
+      	[DMACH_UART2_SRC2] = {
+		.name		= "uart2",
+		.channels	= MAP(S3C2412_DMAREQSEL_UART2_1),
+		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
+	},
+	[DMACH_TIMER] = {
+		.name		= "timer",
+		.channels	= MAP(S3C2412_DMAREQSEL_TIMER),
+	},
+	[DMACH_I2S_IN] = {
+		.name		= "i2s-sdi",
+		.channels	= MAP(S3C2412_DMAREQSEL_I2SRX),
+		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_I2S_OUT] = {
+		.name		= "i2s-sdo",
+		.channels	= MAP(S3C2412_DMAREQSEL_I2STX),
+		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_USB_EP1] = {
+		.name		= "usb-ep1",
+		.channels	= MAP(S3C2412_DMAREQSEL_USBEP1),
+	},
+	[DMACH_USB_EP2] = {
+		.name		= "usb-ep2",
+		.channels	= MAP(S3C2412_DMAREQSEL_USBEP2),
+	},
+	[DMACH_USB_EP3] = {
+		.name		= "usb-ep3",
+		.channels	= MAP(S3C2412_DMAREQSEL_USBEP3),
+	},
+	[DMACH_USB_EP4] = {
+		.name		= "usb-ep4",
+		.channels	= MAP(S3C2412_DMAREQSEL_USBEP4),
+	},
+};
+
+static void s3c2412_dma_select(struct s3c2410_dma_chan *chan,
+			       struct s3c24xx_dma_map *map)
+{
+	writel(map->channels[0] | S3C2412_DMAREQSEL_HW,
+	       chan->regs + S3C2412_DMA_DMAREQSEL);
+}
+
+static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = {
+	.select		= s3c2412_dma_select,
+	.dcon_mask	= 0,
+	.map		= s3c2412_dma_mappings,
+	.map_size	= ARRAY_SIZE(s3c2412_dma_mappings),
+};
+
+static int s3c2412_dma_add(struct sys_device *sysdev)
+{
+	return s3c24xx_dma_init_map(&s3c2412_dma_sel);
+}
+
+static struct sysdev_driver s3c2412_dma_driver = {
+	.add	= s3c2412_dma_add,
+};
+
+static int __init s3c2412_dma_init(void)
+{
+	return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_dma_driver);
+}
+
+arch_initcall(s3c2412_dma_init);
diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c
new file mode 100644
index 0000000..e89dbdc
--- /dev/null
+++ b/arch/arm/mach-s3c2412/irq.c
@@ -0,0 +1,133 @@
+/* linux/arch/arm/mach-s3c2412/irq.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/mach/irq.h>
+
+#include <asm/arch/regs-irq.h>
+#include <asm/arch/regs-gpio.h>
+
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/irq.h>
+#include <asm/plat-s3c24xx/pm.h>
+
+/* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by
+ * having them turn up in both the INT* and the EINT* registers. Whilst
+ * both show the status, they both now need to be acked when the IRQs
+ * go off.
+*/
+
+static void
+s3c2412_irq_mask(unsigned int irqno)
+{
+	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+	unsigned long mask;
+
+	mask = __raw_readl(S3C2410_INTMSK);
+	__raw_writel(mask | bitval, S3C2410_INTMSK);
+
+	mask = __raw_readl(S3C2412_EINTMASK);
+	__raw_writel(mask | bitval, S3C2412_EINTMASK);
+}
+
+static inline void
+s3c2412_irq_ack(unsigned int irqno)
+{
+	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+
+	__raw_writel(bitval, S3C2412_EINTPEND);
+	__raw_writel(bitval, S3C2410_SRCPND);
+	__raw_writel(bitval, S3C2410_INTPND);
+}
+
+static inline void
+s3c2412_irq_maskack(unsigned int irqno)
+{
+	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+	unsigned long mask;
+
+	mask = __raw_readl(S3C2410_INTMSK);
+	__raw_writel(mask|bitval, S3C2410_INTMSK);
+
+	mask = __raw_readl(S3C2412_EINTMASK);
+	__raw_writel(mask | bitval, S3C2412_EINTMASK);
+
+	__raw_writel(bitval, S3C2412_EINTPEND);
+	__raw_writel(bitval, S3C2410_SRCPND);
+	__raw_writel(bitval, S3C2410_INTPND);
+}
+
+static void
+s3c2412_irq_unmask(unsigned int irqno)
+{
+	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+	unsigned long mask;
+
+	mask = __raw_readl(S3C2412_EINTMASK);
+	__raw_writel(mask & ~bitval, S3C2412_EINTMASK);
+
+	mask = __raw_readl(S3C2410_INTMSK);
+	__raw_writel(mask & ~bitval, S3C2410_INTMSK);
+}
+
+static struct irq_chip s3c2412_irq_eint0t4 = {
+	.ack	   = s3c2412_irq_ack,
+	.mask	   = s3c2412_irq_mask,
+	.unmask	   = s3c2412_irq_unmask,
+	.set_wake  = s3c_irq_wake,
+	.set_type  = s3c_irqext_type,
+};
+
+static int s3c2412_irq_add(struct sys_device *sysdev)
+{
+	unsigned int irqno;
+
+	for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
+		set_irq_chip(irqno, &s3c2412_irq_eint0t4);
+		set_irq_handler(irqno, handle_edge_irq);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2412_irq_driver = {
+	.add		= s3c2412_irq_add,
+	.suspend	= s3c24xx_irq_suspend,
+	.resume		= s3c24xx_irq_resume,
+};
+
+static int s3c2412_irq_init(void)
+{
+	return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_irq_driver);
+}
+
+arch_initcall(s3c2412_irq_init);
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
new file mode 100644
index 0000000..32b1561
--- /dev/null
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -0,0 +1,140 @@
+/* linux/arch/arm/mach-s3c2412/mach-smdk2413.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Thanks to Dimity Andric (TomTom) and Steven Ryu (Samsung) for the
+ * loans of SMDK2413 to work with.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/hardware/iomd.h>
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+//#include <asm/debug-ll.h>
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-lcd.h>
+
+#include <asm/arch/idle.h>
+#include <asm/arch/fb.h>
+
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2412.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+#include <asm/plat-s3c24xx/common-smdk.h>
+
+static struct map_desc smdk2413_iodesc[] __initdata = {
+};
+
+static struct s3c2410_uartcfg smdk2413_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	/* IR port */
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x43,
+		.ufcon	     = 0x51,
+	}
+};
+
+static struct platform_device *smdk2413_devices[] __initdata = {
+	&s3c_device_usb,
+	//&s3c_device_lcd,
+	&s3c_device_wdt,
+	&s3c_device_i2c,
+	&s3c_device_iis,
+};
+
+static struct s3c24xx_board smdk2413_board __initdata = {
+	.devices       = smdk2413_devices,
+	.devices_count = ARRAY_SIZE(smdk2413_devices)
+};
+
+static void __init smdk2413_fixup(struct machine_desc *desc,
+				  struct tag *tags, char **cmdline,
+				  struct meminfo *mi)
+{
+	if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) {
+		mi->nr_banks=1;
+		mi->bank[0].start = 0x30000000;
+		mi->bank[0].size = SZ_64M;
+		mi->bank[0].node = 0;
+	}
+}
+
+static void __init smdk2413_map_io(void)
+{
+	s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
+	s3c24xx_set_board(&smdk2413_board);
+}
+
+static void __init smdk2413_machine_init(void)
+{
+	smdk_machine_init();
+}
+
+MACHINE_START(S3C2413, "S3C2413")
+	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+
+	.fixup		= smdk2413_fixup,
+	.init_irq	= s3c24xx_init_irq,
+	.map_io		= smdk2413_map_io,
+	.init_machine	= smdk2413_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
+
+MACHINE_START(SMDK2413, "SMDK2413")
+	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+
+	.fixup		= smdk2413_fixup,
+	.init_irq	= s3c24xx_init_irq,
+	.map_io		= smdk2413_map_io,
+	.init_machine	= smdk2413_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
new file mode 100644
index 0000000..f1afb70
--- /dev/null
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -0,0 +1,169 @@
+/* linux/arch/arm/mach-s3c2412/mach-vstms.c
+ *
+ * (C) 2006 Thomas Gleixner <tglx@linutronix.de>
+ *
+ * Derived from mach-smdk2413.c - (C) 2006 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/hardware/iomd.h>
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-lcd.h>
+
+#include <asm/arch/idle.h>
+#include <asm/arch/fb.h>
+
+#include <asm/arch/nand.h>
+
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2412.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+
+static struct map_desc vstms_iodesc[] __initdata = {
+};
+
+static struct s3c2410_uartcfg vstms_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	}
+};
+
+static struct mtd_partition vstms_nand_part[] = {
+	[0] = {
+		.name	= "Boot Agent",
+		.size	= 0x7C000,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "UBoot Config",
+		.offset = 0x7C000,
+		.size	= 0x4000,
+	},
+	[2] = {
+		.name	= "Kernel",
+		.offset = 0x80000,
+		.size	= 0x200000,
+	},
+	[3] = {
+		.name	= "RFS",
+		.offset	= 0x280000,
+		.size	= 0x3d80000,
+	},
+};
+
+static struct s3c2410_nand_set vstms_nand_sets[] = {
+	[0] = {
+		.name		= "NAND",
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(vstms_nand_part),
+		.partitions	= vstms_nand_part,
+	},
+};
+
+/* choose a set of timings which should suit most 512Mbit
+ * chips and beyond.
+*/
+
+static struct s3c2410_platform_nand vstms_nand_info = {
+	.tacls		= 20,
+	.twrph0		= 60,
+	.twrph1		= 20,
+	.nr_sets	= ARRAY_SIZE(vstms_nand_sets),
+	.sets		= vstms_nand_sets,
+};
+
+static struct platform_device *vstms_devices[] __initdata = {
+	&s3c_device_usb,
+	&s3c_device_wdt,
+	&s3c_device_i2c,
+	&s3c_device_iis,
+	&s3c_device_rtc,
+	&s3c_device_nand,
+};
+
+static struct s3c24xx_board vstms_board __initdata = {
+	.devices       = vstms_devices,
+	.devices_count = ARRAY_SIZE(vstms_devices)
+};
+
+static void __init vstms_fixup(struct machine_desc *desc,
+				  struct tag *tags, char **cmdline,
+				  struct meminfo *mi)
+{
+	if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) {
+		mi->nr_banks=1;
+		mi->bank[0].start = 0x30000000;
+		mi->bank[0].size = SZ_64M;
+		mi->bank[0].node = 0;
+	}
+}
+
+static void __init vstms_map_io(void)
+{
+	s3c_device_nand.dev.platform_data = &vstms_nand_info;
+
+	s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
+	s3c24xx_set_board(&vstms_board);
+}
+
+MACHINE_START(VSTMS, "VSTMS")
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+
+	.fixup		= vstms_fixup,
+	.init_irq	= s3c24xx_init_irq,
+	.map_io		= vstms_map_io,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
new file mode 100644
index 0000000..8988dac
--- /dev/null
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -0,0 +1,128 @@
+/* linux/arch/arm/mach-s3c2412/pm.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <asm/arch/regs-power.h>
+#include <asm/arch/regs-gpioj.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-dsc.h>
+
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
+
+#include <asm/plat-s3c24xx/s3c2412.h>
+
+static void s3c2412_cpu_suspend(void)
+{
+	unsigned long tmp;
+
+	/* set our standby method to sleep */
+
+	tmp = __raw_readl(S3C2412_PWRCFG);
+	tmp |= S3C2412_PWRCFG_STANDBYWFI_SLEEP;
+	__raw_writel(tmp, S3C2412_PWRCFG);
+
+	/* issue the standby signal into the pm unit. Note, we
+	 * issue a write-buffer drain just in case */
+
+	tmp = 0;
+
+	asm("b 1f\n\t"
+	    ".align 5\n\t"
+	    "1:\n\t"
+	    "mcr p15, 0, %0, c7, c10, 4\n\t"
+	    "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp));
+
+	/* we should never get past here */
+
+	panic("sleep resumed to originator?");
+}
+
+static void s3c2412_pm_prepare(void)
+{
+}
+
+static int s3c2412_pm_add(struct sys_device *sysdev)
+{
+	pm_cpu_prep = s3c2412_pm_prepare;
+	pm_cpu_sleep = s3c2412_cpu_suspend;
+
+	return 0;
+}
+
+static struct sleep_save s3c2412_sleep[] = {
+	SAVE_ITEM(S3C2412_DSC0),
+	SAVE_ITEM(S3C2412_DSC1),
+	SAVE_ITEM(S3C2413_GPJDAT),
+	SAVE_ITEM(S3C2413_GPJCON),
+	SAVE_ITEM(S3C2413_GPJUP),
+
+	/* save the PWRCFG to get back to original sleep method */
+
+	SAVE_ITEM(S3C2412_PWRCFG),
+
+	/* save the sleep configuration anyway, just in case these
+	 * get damaged during wakeup */
+
+	SAVE_ITEM(S3C2412_GPBSLPCON),
+	SAVE_ITEM(S3C2412_GPCSLPCON),
+	SAVE_ITEM(S3C2412_GPDSLPCON),
+	SAVE_ITEM(S3C2412_GPESLPCON),
+	SAVE_ITEM(S3C2412_GPFSLPCON),
+	SAVE_ITEM(S3C2412_GPGSLPCON),
+	SAVE_ITEM(S3C2412_GPHSLPCON),
+	SAVE_ITEM(S3C2413_GPJSLPCON),
+};
+
+static int s3c2412_pm_suspend(struct sys_device *dev, pm_message_t state)
+{
+	s3c2410_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
+	return 0;
+}
+
+static int s3c2412_pm_resume(struct sys_device *dev)
+{
+	unsigned long tmp;
+
+	tmp = __raw_readl(S3C2412_PWRCFG);
+	tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK;
+	tmp |=  S3C2412_PWRCFG_STANDBYWFI_IDLE;
+	__raw_writel(tmp, S3C2412_PWRCFG);
+
+	s3c2410_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
+	return 0;
+}
+
+static struct sysdev_driver s3c2412_pm_driver = {
+	.add		= s3c2412_pm_add,
+	.suspend	= s3c2412_pm_suspend,
+	.resume		= s3c2412_pm_resume,
+};
+
+static __init int s3c2412_pm_init(void)
+{
+	return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_pm_driver);
+}
+
+arch_initcall(s3c2412_pm_init);
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
new file mode 100644
index 0000000..aafe0bc
--- /dev/null
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -0,0 +1,181 @@
+/* linux/arch/arm/mach-s3c2412/s3c2412.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/proc-fns.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <asm/arch/idle.h>
+
+#include <asm/arch/regs-clock.h>
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-power.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-gpioj.h>
+#include <asm/arch/regs-dsc.h>
+
+#include <asm/plat-s3c24xx/s3c2412.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/pm.h>
+
+#ifndef CONFIG_CPU_S3C2412_ONLY
+void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
+
+static inline void s3c2412_init_gpio2(void)
+{
+	s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10;
+}
+#else
+#define s3c2412_init_gpio2() do { } while(0)
+#endif
+
+/* Initial IO mappings */
+
+static struct map_desc s3c2412_iodesc[] __initdata = {
+	IODESC_ENT(CLKPWR),
+	IODESC_ENT(LCD),
+	IODESC_ENT(TIMER),
+	IODESC_ENT(WATCHDOG),
+};
+
+/* uart registration process */
+
+void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s3c24xx_init_uartdevs("s3c2412-uart", s3c2410_uart_resources, cfg, no);
+
+	/* rename devices that are s3c2412/s3c2413 specific */
+	s3c_device_sdi.name  = "s3c2412-sdi";
+	s3c_device_lcd.name  = "s3c2412-lcd";
+	s3c_device_nand.name = "s3c2412-nand";
+}
+
+/* s3c2412_idle
+ *
+ * use the standard idle call by ensuring the idle mode
+ * in power config, then issuing the idle co-processor
+ * instruction
+*/
+
+static void s3c2412_idle(void)
+{
+	unsigned long tmp;
+
+	/* ensure our idle mode is to go to idle */
+
+	tmp = __raw_readl(S3C2412_PWRCFG);
+	tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK;
+	tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE;
+	__raw_writel(tmp, S3C2412_PWRCFG);
+
+	cpu_do_idle();
+}
+
+/* s3c2412_map_io
+ *
+ * register the standard cpu IO areas, and any passed in from the
+ * machine specific initialisation.
+*/
+
+void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size)
+{
+	/* move base of IO */
+
+	s3c2412_init_gpio2();
+
+	/* set our idle function */
+
+	s3c24xx_idle = s3c2412_idle;
+
+	/* register our io-tables */
+
+	iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));
+	iotable_init(mach_desc, mach_size);
+}
+
+void __init s3c2412_init_clocks(int xtal)
+{
+	unsigned long tmp;
+	unsigned long fclk;
+	unsigned long hclk;
+	unsigned long pclk;
+
+	/* now we've got our machine bits initialised, work out what
+	 * clocks we've got */
+
+	fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal*2);
+
+	tmp = __raw_readl(S3C2410_CLKDIVN);
+
+	/* work out clock scalings */
+
+	hclk = fclk / ((tmp & S3C2412_CLKDIVN_HDIVN_MASK) + 1);
+	hclk /= ((tmp & S3C2421_CLKDIVN_ARMDIVN) ? 2 : 1);
+	pclk = hclk / ((tmp & S3C2412_CLKDIVN_PDIVN) ? 2 : 1);
+
+	/* print brieft summary of clocks, etc */
+
+	printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
+	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
+
+	/* initialise the clocks here, to allow other things like the
+	 * console to use them
+	 */
+
+	s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
+	s3c2412_baseclk_add();
+}
+
+/* need to register class before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2412 based system)
+ * as a driver which may support both 2410 and 2440 may try and use it.
+*/
+
+struct sysdev_class s3c2412_sysclass = {
+	set_kset_name("s3c2412-core"),
+};
+
+static int __init s3c2412_core_init(void)
+{
+	return sysdev_class_register(&s3c2412_sysclass);
+}
+
+core_initcall(s3c2412_core_init);
+
+static struct sys_device s3c2412_sysdev = {
+	.cls		= &s3c2412_sysclass,
+};
+
+int __init s3c2412_init(void)
+{
+	printk("S3C2412: Initialising architecture\n");
+
+	return sysdev_register(&s3c2412_sysdev);
+}
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
new file mode 100644
index 0000000..e3bfda0
--- /dev/null
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -0,0 +1,71 @@
+# arch/arm/mach-s3c2440/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config CPU_S3C2440
+	bool
+	depends on ARCH_S3C2410
+	select S3C2410_CLOCK
+	select S3C2410_PM if PM
+	select S3C2410_GPIO
+	select S3C2440_DMA if S3C2410_DMA
+	select CPU_S3C244X
+	help
+	  Support for S3C2440 Samsung Mobile CPU based systems.
+
+config S3C2440_DMA
+	bool
+	depends on ARCH_S3C2410 && CPU_S3C24405B
+	help
+	  Support for S3C2440 specific DMA code5A
+
+
+menu "S3C2440 Machines"
+
+config MACH_ANUBIS
+	bool "Simtec Electronics ANUBIS"
+	select CPU_S3C2440
+	select PM_SIMTEC if PM
+	help
+	  Say Y here if you are using the Simtec Electronics ANUBIS
+	  development system
+
+config MACH_OSIRIS
+	bool "Simtec IM2440D20 (OSIRIS) module"
+	select CPU_S3C2440
+	select PM_SIMTEC if PM
+	help
+	  Say Y here if you are using the Simtec IM2440D20 module, also
+	  known as the Osiris.
+
+config MACH_RX3715
+	bool "HP iPAQ rx3715"
+	select CPU_S3C2440
+	select PM_H1940 if PM
+	help
+	  Say Y here if you are using the HP iPAQ rx3715.
+
+config ARCH_S3C2440
+	bool "SMDK2440"
+	select CPU_S3C2440
+	select MACH_SMDK
+	help
+	  Say Y here if you are using the SMDK2440.
+
+config MACH_NEXCODER_2440
+ 	bool "NexVision NEXCODER 2440 Light Board"
+ 	select CPU_S3C2440
+	help
+ 	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
+
+config SMDK2440_CPU2440
+	bool "SMDK2440 with S3C2440 CPU module"
+	depends on ARCH_S3C2440
+	default y if ARCH_S3C2440
+	select CPU_S3C2440
+
+
+endmenu
+
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
new file mode 100644
index 0000000..c81ed62
--- /dev/null
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -0,0 +1,23 @@
+# arch/arm/mach-s3c2440/Makefile
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o dsc.o
+obj-$(CONFIG_CPU_S3C2440)	+= irq.o
+obj-$(CONFIG_CPU_S3C2440)	+= clock.o
+obj-$(CONFIG_S3C2440_DMA)	+= dma.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_ANUBIS)	+= mach-anubis.o
+obj-$(CONFIG_MACH_OSIRIS)	+= mach-osiris.o
+obj-$(CONFIG_MACH_RX3715)	+= mach-rx3715.o
+obj-$(CONFIG_ARCH_S3C2440)	+= mach-smdk2440.o
+obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
new file mode 100644
index 0000000..79e2ea4
--- /dev/null
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -0,0 +1,170 @@
+/* linux/arch/arm/mach-s3c2440/clock.c
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2440 Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+
+#include <asm/hardware.h>
+#include <asm/atomic.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-clock.h>
+
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+/* S3C2440 extended clock support */
+
+static unsigned long s3c2440_camif_upll_round(struct clk *clk,
+					      unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	int div;
+
+	if (rate > parent_rate)
+		return parent_rate;
+
+	/* note, we remove the +/- 1 calculations for the divisor */
+
+	div = (parent_rate / rate) / 2;
+
+	if (div < 1)
+		div = 1;
+	else if (div > 16)
+		div = 16;
+
+	return parent_rate / (div * 2);
+}
+
+static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
+
+	rate = s3c2440_camif_upll_round(clk, rate);
+
+	camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK);
+
+	if (rate != parent_rate) {
+		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
+		camdivn |= (((parent_rate / rate) / 2) - 1);
+	}
+
+	__raw_writel(camdivn, S3C2440_CAMDIVN);
+
+	return 0;
+}
+
+/* Extra S3C2440 clocks */
+
+static struct clk s3c2440_clk_cam = {
+	.name		= "camif",
+	.id		= -1,
+	.enable		= s3c2410_clkcon_enable,
+	.ctrlbit	= S3C2440_CLKCON_CAMERA,
+};
+
+static struct clk s3c2440_clk_cam_upll = {
+	.name		= "camif-upll",
+	.id		= -1,
+	.set_rate	= s3c2440_camif_upll_setrate,
+	.round_rate	= s3c2440_camif_upll_round,
+};
+
+static struct clk s3c2440_clk_ac97 = {
+	.name		= "ac97",
+	.id		= -1,
+	.enable		= s3c2410_clkcon_enable,
+	.ctrlbit	= S3C2440_CLKCON_CAMERA,
+};
+
+static int s3c2440_clk_add(struct sys_device *sysdev)
+{
+	unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
+	unsigned long clkdivn;
+	struct clk *clock_h;
+	struct clk *clock_p;
+	struct clk *clock_upll;
+
+	printk("S3C2440: Clock Support, DVS %s\n",
+	       (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
+
+	clock_p = clk_get(NULL, "pclk");
+	clock_h = clk_get(NULL, "hclk");
+	clock_upll = clk_get(NULL, "upll");
+
+	if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
+		printk(KERN_ERR "S3C2440: Failed to get parent clocks\n");
+		return -EINVAL;
+	}
+
+	/* check rate of UPLL, and if it is near 96MHz, then change
+	 * to using half the UPLL rate for the system */
+
+	if (clk_get_rate(clock_upll) > (94 * MHZ)) {
+		clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
+
+		mutex_lock(&clocks_mutex);
+
+		clkdivn = __raw_readl(S3C2410_CLKDIVN);
+		clkdivn |= S3C2440_CLKDIVN_UCLK;
+		__raw_writel(clkdivn, S3C2410_CLKDIVN);
+
+		mutex_unlock(&clocks_mutex);
+	}
+
+	s3c2440_clk_cam.parent = clock_h;
+	s3c2440_clk_ac97.parent = clock_p;
+	s3c2440_clk_cam_upll.parent = clock_upll;
+
+	s3c24xx_register_clock(&s3c2440_clk_ac97);
+	s3c24xx_register_clock(&s3c2440_clk_cam);
+	s3c24xx_register_clock(&s3c2440_clk_cam_upll);
+
+	clk_disable(&s3c2440_clk_ac97);
+	clk_disable(&s3c2440_clk_cam);
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2440_clk_driver = {
+	.add	= s3c2440_clk_add,
+};
+
+static __init int s3c24xx_clk_driver(void)
+{
+	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_clk_driver);
+}
+
+arch_initcall(s3c24xx_clk_driver);
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
new file mode 100644
index 0000000..8e51137
--- /dev/null
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -0,0 +1,165 @@
+/* linux/arch/arm/mach-s3c2440/dma.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2440 DMA selection
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+
+#include <asm/dma.h>
+#include <asm/arch/dma.h>
+#include <asm/plat-s3c24xx/dma.h>
+
+#include <asm/plat-s3c24xx/cpu.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-ac97.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/regs-sdi.h>
+#include <asm/arch/regs-iis.h>
+#include <asm/arch/regs-spi.h>
+
+static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = {
+	[DMACH_XD0] = {
+		.name		= "xdreq0",
+		.channels[0]	= S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID,
+	},
+	[DMACH_XD1] = {
+		.name		= "xdreq1",
+		.channels[1]	= S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID,
+	},
+	[DMACH_SDI] = {
+		.name		= "sdi",
+		.channels[0]	= S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
+		.channels[1]	= S3C2440_DCON_CH1_SDI | DMA_CH_VALID,
+		.channels[2]	= S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
+		.channels[3]	= S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_SPI0] = {
+		.name		= "spi0",
+		.channels[1]	= S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_SPI + S3C2410_SPTDAT,
+		.hw_addr.from	= S3C2410_PA_SPI + S3C2410_SPRDAT,
+	},
+	[DMACH_SPI1] = {
+		.name		= "spi1",
+		.channels[3]	= S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
+		.hw_addr.from	= S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
+	},
+	[DMACH_UART0] = {
+		.name		= "uart0",
+		.channels[0]	= S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
+	},
+	[DMACH_UART1] = {
+		.name		= "uart1",
+		.channels[1]	= S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
+	},
+      	[DMACH_UART2] = {
+		.name		= "uart2",
+		.channels[3]	= S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
+	},
+	[DMACH_TIMER] = {
+		.name		= "timer",
+		.channels[0]	= S3C2410_DCON_CH0_TIMER | DMA_CH_VALID,
+		.channels[2]	= S3C2410_DCON_CH2_TIMER | DMA_CH_VALID,
+		.channels[3]	= S3C2410_DCON_CH3_TIMER | DMA_CH_VALID,
+	},
+	[DMACH_I2S_IN] = {
+		.name		= "i2s-sdi",
+		.channels[1]	= S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
+		.channels[2]	= S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
+		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_I2S_OUT] = {
+		.name		= "i2s-sdo",
+		.channels[0]	= S3C2440_DCON_CH0_I2SSDO | DMA_CH_VALID,
+		.channels[2]	= S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_PCM_IN] = {
+		.name		= "pcm-in",
+		.channels[0]	= S3C2440_DCON_CH0_PCMIN | DMA_CH_VALID,
+		.channels[2]	= S3C2440_DCON_CH2_PCMIN | DMA_CH_VALID,
+		.hw_addr.from	= S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
+	},
+	[DMACH_PCM_OUT] = {
+		.name		= "pcm-out",
+		.channels[1]	= S3C2440_DCON_CH1_PCMOUT | DMA_CH_VALID,
+		.channels[3]	= S3C2440_DCON_CH3_PCMOUT | DMA_CH_VALID,
+		.hw_addr.to	= S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
+	},
+	[DMACH_MIC_IN] = {
+		.name		= "mic-in",
+		.channels[2]	= S3C2440_DCON_CH2_MICIN | DMA_CH_VALID,
+		.channels[3]	= S3C2440_DCON_CH3_MICIN | DMA_CH_VALID,
+		.hw_addr.from	= S3C2440_PA_AC97 + S3C_AC97_MIC_DATA,
+	},
+	[DMACH_USB_EP1] = {
+		.name		= "usb-ep1",
+		.channels[0]	= S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID,
+	},
+	[DMACH_USB_EP2] = {
+		.name		= "usb-ep2",
+		.channels[1]	= S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID,
+	},
+	[DMACH_USB_EP3] = {
+		.name		= "usb-ep3",
+		.channels[2]	= S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID,
+	},
+	[DMACH_USB_EP4] = {
+		.name		= "usb-ep4",
+		.channels[3]	= S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID,
+	},
+};
+
+static void s3c2440_dma_select(struct s3c2410_dma_chan *chan,
+			       struct s3c24xx_dma_map *map)
+{
+	chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID;
+}
+
+static struct s3c24xx_dma_selection __initdata s3c2440_dma_sel = {
+	.select		= s3c2440_dma_select,
+	.dcon_mask	= 7 << 24,
+	.map		= s3c2440_dma_mappings,
+	.map_size	= ARRAY_SIZE(s3c2440_dma_mappings),
+};
+
+static int s3c2440_dma_add(struct sys_device *sysdev)
+{
+	return s3c24xx_dma_init_map(&s3c2440_dma_sel);
+}
+
+static struct sysdev_driver s3c2440_dma_driver = {
+	.add	= s3c2440_dma_add,
+};
+
+static int __init s3c2440_dma_init(void)
+{
+	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_dma_driver);
+}
+
+arch_initcall(s3c2440_dma_init);
+
diff --git a/arch/arm/mach-s3c2440/dsc.c b/arch/arm/mach-s3c2440/dsc.c
new file mode 100644
index 0000000..2995ff5
--- /dev/null
+++ b/arch/arm/mach-s3c2440/dsc.c
@@ -0,0 +1,54 @@
+/* linux/arch/arm/mach-s3c2440/dsc.c
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *   Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C2440 Drive Strength Control support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-dsc.h>
+
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/s3c2440.h>
+
+int s3c2440_set_dsc(unsigned int pin, unsigned int value)
+{
+	void __iomem *base;
+	unsigned long val;
+	unsigned long flags;
+	unsigned long mask;
+
+	base = (pin & S3C2440_SELECT_DSC1) ? S3C2440_DSC1 : S3C2440_DSC0;
+	mask = 3 << S3C2440_DSC_GETSHIFT(pin);
+
+	local_irq_save(flags);
+
+	val = __raw_readl(base);
+	val &= ~mask;
+	val |= value & mask;
+	__raw_writel(val, base);
+
+	local_irq_restore(flags);
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2440_set_dsc);
diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c
new file mode 100644
index 0000000..1069d13
--- /dev/null
+++ b/arch/arm/mach-s3c2440/irq.c
@@ -0,0 +1,130 @@
+/* linux/arch/arm/mach-s3c2440/irq.c
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/mach/irq.h>
+
+#include <asm/arch/regs-irq.h>
+#include <asm/arch/regs-gpio.h>
+
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
+#include <asm/plat-s3c24xx/irq.h>
+
+/* WDT/AC97 */
+
+static void s3c_irq_demux_wdtac97(unsigned int irq,
+				  struct irq_desc *desc)
+{
+	unsigned int subsrc, submsk;
+	struct irq_desc *mydesc;
+
+	/* read the current pending interrupts, and the mask
+	 * for what it is available */
+
+	subsrc = __raw_readl(S3C2410_SUBSRCPND);
+	submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+	subsrc &= ~submsk;
+	subsrc >>= 13;
+	subsrc &= 3;
+
+	if (subsrc != 0) {
+		if (subsrc & 1) {
+			mydesc = irq_desc + IRQ_S3C2440_WDT;
+			desc_handle_irq(IRQ_S3C2440_WDT, mydesc);
+		}
+		if (subsrc & 2) {
+			mydesc = irq_desc + IRQ_S3C2440_AC97;
+			desc_handle_irq(IRQ_S3C2440_AC97, mydesc);
+		}
+	}
+}
+
+
+#define INTMSK_WDT	 (1UL << (IRQ_WDT - IRQ_EINT0))
+
+static void
+s3c_irq_wdtac97_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_WDT, 3<<13);
+}
+
+static void
+s3c_irq_wdtac97_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_WDT);
+}
+
+static void
+s3c_irq_wdtac97_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_WDT, 3<<13);
+}
+
+static struct irq_chip s3c_irq_wdtac97 = {
+	.mask	    = s3c_irq_wdtac97_mask,
+	.unmask	    = s3c_irq_wdtac97_unmask,
+	.ack	    = s3c_irq_wdtac97_ack,
+};
+
+static int s3c2440_irq_add(struct sys_device *sysdev)
+{
+	unsigned int irqno;
+
+	printk("S3C2440: IRQ Support\n");
+
+	/* add new chained handler for wdt, ac7 */
+
+	set_irq_chip(IRQ_WDT, &s3c_irq_level_chip);
+	set_irq_handler(IRQ_WDT, handle_level_irq);
+	set_irq_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
+
+	for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
+		set_irq_chip(irqno, &s3c_irq_wdtac97);
+		set_irq_handler(irqno, handle_level_irq);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2440_irq_driver = {
+	.add		= s3c2440_irq_add,
+};
+
+static int s3c2440_irq_init(void)
+{
+	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_irq_driver);
+}
+
+arch_initcall(s3c2440_irq_init);
+
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
new file mode 100644
index 0000000..3f0288e
--- /dev/null
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -0,0 +1,325 @@
+/* linux/arch/arm/mach-s3c2440/mach-anubis.c
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/anubis-map.h>
+#include <asm/arch/anubis-irq.h>
+#include <asm/arch/anubis-cpld.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/nand.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+#define COPYRIGHT ", (c) 2005 Simtec Electronics"
+
+static struct map_desc anubis_iodesc[] __initdata = {
+  /* ISA IO areas */
+
+  {
+	.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
+	.pfn		= __phys_to_pfn(0x0),
+	.length		= SZ_4M,
+	.type		= MT_DEVICE,
+  }, {
+	.virtual	= (u32)S3C24XX_VA_ISA_WORD,
+	.pfn		= __phys_to_pfn(0x0),
+	.length 	= SZ_4M,
+	.type		= MT_DEVICE,
+  },
+
+  /* we could possibly compress the next set down into a set of smaller tables
+   * pagetables, but that would mean using an L2 section, and it still means
+   * we cannot actually feed the same register to an LDR due to 16K spacing
+   */
+
+  /* CPLD control registers */
+
+  {
+	.virtual	= (u32)ANUBIS_VA_CTRL1,
+	.pfn		= __phys_to_pfn(ANUBIS_PA_CTRL1),
+	.length		= SZ_4K,
+	.type		= MT_DEVICE,
+  }, {
+	.virtual	= (u32)ANUBIS_VA_CTRL2,
+	.pfn		= __phys_to_pfn(ANUBIS_PA_CTRL2),
+	.length		= SZ_4K,
+	.type		= MT_DEVICE,
+  },
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c24xx_uart_clksrc anubis_serial_clocks[] = {
+	[0] = {
+		.name		= "uclk",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+	[1] = {
+		.name		= "pclk",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	}
+};
+
+
+static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+		.clocks	     = anubis_serial_clocks,
+		.clocks_size = ARRAY_SIZE(anubis_serial_clocks),
+	},
+	[1] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+		.clocks	     = anubis_serial_clocks,
+		.clocks_size = ARRAY_SIZE(anubis_serial_clocks),
+	},
+};
+
+/* NAND Flash on Anubis board */
+
+static int external_map[]   = { 2 };
+static int chip0_map[]      = { 0 };
+static int chip1_map[]      = { 1 };
+
+static struct mtd_partition anubis_default_nand_part[] = {
+	[0] = {
+		.name	= "Boot Agent",
+		.size	= SZ_16K,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "/boot",
+		.size	= SZ_4M - SZ_16K,
+		.offset	= SZ_16K,
+	},
+	[2] = {
+		.name	= "user1",
+		.offset	= SZ_4M,
+		.size	= SZ_32M - SZ_4M,
+	},
+	[3] = {
+		.name	= "user2",
+		.offset	= SZ_32M,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+/* the Anubis has 3 selectable slots for nand-flash, the two
+ * on-board chip areas, as well as the external slot.
+ *
+ * Note, there is no current hot-plug support for the External
+ * socket.
+*/
+
+static struct s3c2410_nand_set anubis_nand_sets[] = {
+	[1] = {
+		.name		= "External",
+		.nr_chips	= 1,
+		.nr_map		= external_map,
+		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
+		.partitions	= anubis_default_nand_part,
+	},
+	[0] = {
+		.name		= "chip0",
+		.nr_chips	= 1,
+		.nr_map		= chip0_map,
+		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
+		.partitions	= anubis_default_nand_part,
+	},
+	[2] = {
+		.name		= "chip1",
+		.nr_chips	= 1,
+		.nr_map		= chip1_map,
+		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
+		.partitions	= anubis_default_nand_part,
+	},
+};
+
+static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
+{
+	unsigned int tmp;
+
+	slot = set->nr_map[slot] & 3;
+
+	pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n",
+		 slot, set, set->nr_map);
+
+	tmp = __raw_readb(ANUBIS_VA_CTRL1);
+	tmp &= ~ANUBIS_CTRL1_NANDSEL;
+	tmp |= slot;
+
+	pr_debug("anubis_nand: ctrl1 now %02x\n", tmp);
+
+	__raw_writeb(tmp, ANUBIS_VA_CTRL1);
+}
+
+static struct s3c2410_platform_nand anubis_nand_info = {
+	.tacls		= 25,
+	.twrph0		= 55,
+	.twrph1		= 40,
+	.nr_sets	= ARRAY_SIZE(anubis_nand_sets),
+	.sets		= anubis_nand_sets,
+	.select_chip	= anubis_nand_select,
+};
+
+/* IDE channels */
+
+static struct resource anubis_ide0_resource[] = {
+	{
+		.start	= S3C2410_CS3,
+		.end	= S3C2410_CS3 + (8*32) - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= S3C2410_CS3 + (1<<26),
+		.end	= S3C2410_CS3 + (1<<26) + (8*32) - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_IDE0,
+		.end	= IRQ_IDE0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device anubis_device_ide0 = {
+	.name		= "simtec-ide",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(anubis_ide0_resource),
+	.resource	= anubis_ide0_resource,
+};
+
+static struct resource anubis_ide1_resource[] = {
+	{
+		.start	= S3C2410_CS4,
+		.end	= S3C2410_CS4 + (8*32) - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= S3C2410_CS4 + (1<<26),
+		.end	= S3C2410_CS4 + (1<<26) + (8*32) - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_IDE0,
+		.end	= IRQ_IDE0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+
+static struct platform_device anubis_device_ide1 = {
+	.name		= "simtec-ide",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(anubis_ide1_resource),
+	.resource	= anubis_ide1_resource,
+};
+
+/* Standard Anubis devices */
+
+static struct platform_device *anubis_devices[] __initdata = {
+	&s3c_device_usb,
+	&s3c_device_wdt,
+	&s3c_device_adc,
+	&s3c_device_i2c,
+ 	&s3c_device_rtc,
+	&s3c_device_nand,
+	&anubis_device_ide0,
+	&anubis_device_ide1,
+};
+
+static struct clk *anubis_clocks[] = {
+	&s3c24xx_dclk0,
+	&s3c24xx_dclk1,
+	&s3c24xx_clkout0,
+	&s3c24xx_clkout1,
+	&s3c24xx_uclk,
+};
+
+static struct s3c24xx_board anubis_board __initdata = {
+	.devices       = anubis_devices,
+	.devices_count = ARRAY_SIZE(anubis_devices),
+	.clocks	       = anubis_clocks,
+	.clocks_count  = ARRAY_SIZE(anubis_clocks),
+};
+
+static void __init anubis_map_io(void)
+{
+	/* initialise the clocks */
+
+	s3c24xx_dclk0.parent = NULL;
+	s3c24xx_dclk0.rate   = 12*1000*1000;
+
+	s3c24xx_dclk1.parent = NULL;
+	s3c24xx_dclk1.rate   = 24*1000*1000;
+
+	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
+	s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
+
+	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
+
+	s3c_device_nand.dev.platform_data = &anubis_nand_info;
+
+	s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
+	s3c24xx_init_clocks(0);
+	s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
+	s3c24xx_set_board(&anubis_board);
+
+	/* ensure that the GPIO is setup */
+	s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+}
+
+MACHINE_START(ANUBIS, "Simtec-Anubis")
+	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.map_io		= anubis_map_io,
+	.init_irq	= s3c24xx_init_irq,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
new file mode 100644
index 0000000..6d551d8
--- /dev/null
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -0,0 +1,158 @@
+/* linux/arch/arm/mach-s3c2440/mach-nexcoder.c
+ *
+ * Copyright (c) 2004 Nex Vision
+ *   Guillaume GOURAT <guillaume.gourat@nexvision.tv>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ *     15-10-2004 GG  Created initial version
+ *     12-03-2005 BJD Updated for release
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/map.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/setup.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+//#include <asm/debug-ll.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-serial.h>
+
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2440.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+static struct map_desc nexcoder_iodesc[] __initdata = {
+	/* nothing here yet */
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG12 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg nexcoder_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	}
+};
+
+/* NOR Flash on NexVision NexCoder 2440 board */
+
+static struct resource nexcoder_nor_resource[] = {
+	[0] = {
+		.start = S3C2410_CS0,
+		.end   = S3C2410_CS0 + (8*1024*1024) - 1,
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+static struct map_info nexcoder_nor_map = {
+	.bankwidth = 2,
+};
+
+static struct platform_device nexcoder_device_nor = {
+	.name		= "mtd-flash",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nexcoder_nor_resource),
+	.resource	= nexcoder_nor_resource,
+	.dev =
+	{
+		.platform_data = &nexcoder_nor_map,
+	}
+};
+
+/* Standard Nexcoder devices */
+
+static struct platform_device *nexcoder_devices[] __initdata = {
+	&s3c_device_usb,
+	&s3c_device_lcd,
+	&s3c_device_wdt,
+	&s3c_device_i2c,
+	&s3c_device_iis,
+ 	&s3c_device_rtc,
+	&s3c_device_camif,
+	&s3c_device_spi0,
+	&s3c_device_spi1,
+	&nexcoder_device_nor,
+};
+
+static struct s3c24xx_board nexcoder_board __initdata = {
+	.devices       = nexcoder_devices,
+	.devices_count = ARRAY_SIZE(nexcoder_devices),
+};
+
+
+static void __init nexcoder_sensorboard_init(void)
+{
+	// Initialize SCCB bus
+	s3c2410_gpio_setpin(S3C2410_GPE14, 1); // IICSCL
+	s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_OUTP);
+	s3c2410_gpio_setpin(S3C2410_GPE15, 1); // IICSDA
+	s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_OUTP);
+
+	// Power up the sensor board
+	s3c2410_gpio_setpin(S3C2410_GPF1, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPF1, S3C2410_GPF1_OUTP); // CAM_GPIO7 => nLDO_PWRDN
+	s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP); // CAM_GPIO6 => CAM_PWRDN
+}
+
+static void __init nexcoder_map_io(void)
+{
+	s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
+	s3c24xx_init_clocks(0);
+	s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
+	s3c24xx_set_board(&nexcoder_board);
+	nexcoder_sensorboard_init();
+}
+
+
+MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
+	/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.map_io		= nexcoder_map_io,
+	.init_irq	= s3c24xx_init_irq,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
new file mode 100644
index 0000000..2ed8e51
--- /dev/null
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -0,0 +1,303 @@
+/* linux/arch/arm/mach-s3c2440/mach-osiris.c
+ *
+ * Copyright (c) 2005 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/osiris-map.h>
+#include <asm/arch/osiris-cpld.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/nand.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+/* onboard perihpheral map */
+
+static struct map_desc osiris_iodesc[] __initdata = {
+  /* ISA IO areas (may be over-written later) */
+
+  {
+	  .virtual	= (u32)S3C24XX_VA_ISA_BYTE,
+	  .pfn		= __phys_to_pfn(S3C2410_CS5),
+	  .length	= SZ_16M,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)S3C24XX_VA_ISA_WORD,
+	  .pfn		= __phys_to_pfn(S3C2410_CS5),
+	  .length	= SZ_16M,
+	  .type		= MT_DEVICE,
+  },
+
+  /* CPLD control registers */
+
+  {
+	  .virtual	= (u32)OSIRIS_VA_CTRL1,
+	  .pfn		= __phys_to_pfn(OSIRIS_PA_CTRL1),
+	  .length	= SZ_16K,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)OSIRIS_VA_CTRL2,
+	  .pfn		= __phys_to_pfn(OSIRIS_PA_CTRL2),
+	  .length	= SZ_16K,
+	  .type		= MT_DEVICE,
+  },
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c24xx_uart_clksrc osiris_serial_clocks[] = {
+	[0] = {
+		.name		= "uclk",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+	[1] = {
+		.name		= "pclk",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	}
+};
+
+static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+		.clocks	     = osiris_serial_clocks,
+		.clocks_size = ARRAY_SIZE(osiris_serial_clocks),
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+		.clocks	     = osiris_serial_clocks,
+		.clocks_size = ARRAY_SIZE(osiris_serial_clocks),
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+		.clocks	     = osiris_serial_clocks,
+		.clocks_size = ARRAY_SIZE(osiris_serial_clocks),
+	}
+};
+
+/* NAND Flash on Osiris board */
+
+static int external_map[]   = { 2 };
+static int chip0_map[]      = { 0 };
+static int chip1_map[]      = { 1 };
+
+static struct mtd_partition osiris_default_nand_part[] = {
+	[0] = {
+		.name	= "Boot Agent",
+		.size	= SZ_16K,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "/boot",
+		.size	= SZ_4M - SZ_16K,
+		.offset	= SZ_16K,
+	},
+	[2] = {
+		.name	= "user1",
+		.offset	= SZ_4M,
+		.size	= SZ_32M - SZ_4M,
+	},
+	[3] = {
+		.name	= "user2",
+		.offset	= SZ_32M,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+/* the Osiris has 3 selectable slots for nand-flash, the two
+ * on-board chip areas, as well as the external slot.
+ *
+ * Note, there is no current hot-plug support for the External
+ * socket.
+*/
+
+static struct s3c2410_nand_set osiris_nand_sets[] = {
+	[1] = {
+		.name		= "External",
+		.nr_chips	= 1,
+		.nr_map		= external_map,
+		.nr_partitions	= ARRAY_SIZE(osiris_default_nand_part),
+		.partitions	= osiris_default_nand_part,
+	},
+	[0] = {
+		.name		= "chip0",
+		.nr_chips	= 1,
+		.nr_map		= chip0_map,
+		.nr_partitions	= ARRAY_SIZE(osiris_default_nand_part),
+		.partitions	= osiris_default_nand_part,
+	},
+	[2] = {
+		.name		= "chip1",
+		.nr_chips	= 1,
+		.nr_map		= chip1_map,
+		.nr_partitions	= ARRAY_SIZE(osiris_default_nand_part),
+		.partitions	= osiris_default_nand_part,
+	},
+};
+
+static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
+{
+	unsigned int tmp;
+
+	slot = set->nr_map[slot] & 3;
+
+	pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n",
+		 slot, set, set->nr_map);
+
+	tmp = __raw_readb(OSIRIS_VA_CTRL1);
+	tmp &= ~OSIRIS_CTRL1_NANDSEL;
+	tmp |= slot;
+
+	pr_debug("osiris_nand: ctrl1 now %02x\n", tmp);
+
+	__raw_writeb(tmp, OSIRIS_VA_CTRL1);
+}
+
+static struct s3c2410_platform_nand osiris_nand_info = {
+	.tacls		= 25,
+	.twrph0		= 60,
+	.twrph1		= 60,
+	.nr_sets	= ARRAY_SIZE(osiris_nand_sets),
+	.sets		= osiris_nand_sets,
+	.select_chip	= osiris_nand_select,
+};
+
+/* PCMCIA control and configuration */
+
+static struct resource osiris_pcmcia_resource[] = {
+	[0] = {
+		.start	= 0x0f000000,
+		.end	= 0x0f100000,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 0x0c000000,
+		.end	= 0x0c100000,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device osiris_pcmcia = {
+	.name		= "osiris-pcmcia",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(osiris_pcmcia_resource),
+	.resource	= osiris_pcmcia_resource,
+};
+
+/* Standard Osiris devices */
+
+static struct platform_device *osiris_devices[] __initdata = {
+	&s3c_device_i2c,
+	&s3c_device_nand,
+	&osiris_pcmcia,
+};
+
+static struct clk *osiris_clocks[] = {
+	&s3c24xx_dclk0,
+	&s3c24xx_dclk1,
+	&s3c24xx_clkout0,
+	&s3c24xx_clkout1,
+	&s3c24xx_uclk,
+};
+
+static struct s3c24xx_board osiris_board __initdata = {
+	.devices       = osiris_devices,
+	.devices_count = ARRAY_SIZE(osiris_devices),
+	.clocks	       = osiris_clocks,
+	.clocks_count  = ARRAY_SIZE(osiris_clocks),
+};
+
+static void __init osiris_map_io(void)
+{
+	unsigned long flags;
+
+	/* initialise the clocks */
+
+	s3c24xx_dclk0.parent = NULL;
+	s3c24xx_dclk0.rate   = 12*1000*1000;
+
+	s3c24xx_dclk1.parent = NULL;
+	s3c24xx_dclk1.rate   = 24*1000*1000;
+
+	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
+	s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
+
+	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
+
+	s3c_device_nand.dev.platform_data = &osiris_nand_info;
+
+	s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
+	s3c24xx_init_clocks(0);
+	s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
+	s3c24xx_set_board(&osiris_board);
+
+	/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
+
+	local_irq_save(flags);
+	__raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON);
+	local_irq_restore(flags);
+
+	/* write-protect line to the NAND */
+	s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+}
+
+MACHINE_START(OSIRIS, "Simtec-OSIRIS")
+	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.map_io		= osiris_map_io,
+	.init_irq	= s3c24xx_init_irq,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
new file mode 100644
index 0000000..1d4e19b
--- /dev/null
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -0,0 +1,244 @@
+/* linux/arch/arm/mach-s3c2440/mach-rx3715.c
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://www.handhelds.org/projects/rx3715.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/console.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/hardware/iomd.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-lcd.h>
+
+#include <asm/arch/h1940.h>
+#include <asm/arch/nand.h>
+#include <asm/arch/fb.h>
+
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
+
+static struct map_desc rx3715_iodesc[] __initdata = {
+	/* dump ISA space somewhere unused */
+
+	{
+		.virtual	= (u32)S3C24XX_VA_ISA_WORD,
+		.pfn		= __phys_to_pfn(S3C2410_CS3),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
+		.pfn		= __phys_to_pfn(S3C2410_CS3),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE,
+	},
+};
+
+
+static struct s3c24xx_uart_clksrc rx3715_serial_clocks[] = {
+	[0] = {
+		.name		= "fclk",
+		.divisor	= 0,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	}
+};
+
+static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+		.clocks	     = rx3715_serial_clocks,
+		.clocks_size = ARRAY_SIZE(rx3715_serial_clocks),
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x00,
+		.clocks	     = rx3715_serial_clocks,
+		.clocks_size = ARRAY_SIZE(rx3715_serial_clocks),
+	},
+	/* IR port */
+	[2] = {
+		.hwport	     = 2,
+		.uart_flags  = UPF_CONS_FLOW,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x43,
+		.ufcon	     = 0x51,
+		.clocks	     = rx3715_serial_clocks,
+		.clocks_size = ARRAY_SIZE(rx3715_serial_clocks),
+	}
+};
+
+/* framebuffer lcd controller information */
+
+static struct s3c2410fb_mach_info rx3715_lcdcfg __initdata = {
+	.regs	= {
+		.lcdcon1 =	S3C2410_LCDCON1_TFT16BPP | \
+				S3C2410_LCDCON1_TFT | \
+				S3C2410_LCDCON1_CLKVAL(0x0C),
+
+		.lcdcon2 =	S3C2410_LCDCON2_VBPD(5) | \
+				S3C2410_LCDCON2_LINEVAL(319) | \
+				S3C2410_LCDCON2_VFPD(6) | \
+				S3C2410_LCDCON2_VSPW(2),
+
+		.lcdcon3 =	S3C2410_LCDCON3_HBPD(35) | \
+				S3C2410_LCDCON3_HOZVAL(239) | \
+				S3C2410_LCDCON3_HFPD(35),
+
+		.lcdcon4 =	S3C2410_LCDCON4_MVAL(0) | \
+				S3C2410_LCDCON4_HSPW(7),
+
+		.lcdcon5 =	S3C2410_LCDCON5_INVVLINE |
+				S3C2410_LCDCON5_FRM565 |
+				S3C2410_LCDCON5_HWSWP,
+	},
+
+	.lpcsel =	0xf82,
+
+	.gpccon =	0xaa955699,
+	.gpccon_mask =	0xffc003cc,
+	.gpcup =	0x0000ffff,
+	.gpcup_mask =	0xffffffff,
+
+	.gpdcon =	0xaa95aaa1,
+	.gpdcon_mask =	0xffc0fff0,
+	.gpdup =	0x0000faff,
+	.gpdup_mask =	0xffffffff,
+
+	.fixed_syncs =	1,
+	.width  =	240,
+	.height =	320,
+
+	.xres	= {
+		.min =		240,
+		.max =		240,
+		.defval =	240,
+	},
+
+	.yres	= {
+		.max =		320,
+		.min =		320,
+		.defval	=	320,
+	},
+
+	.bpp	= {
+		.min =		16,
+		.max =		16,
+		.defval =	16,
+	},
+};
+
+static struct mtd_partition rx3715_nand_part[] = {
+	[0] = {
+		.name		= "Whole Flash",
+		.offset		= 0,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= MTD_WRITEABLE,
+	}
+};
+
+static struct s3c2410_nand_set rx3715_nand_sets[] = {
+	[0] = {
+		.name		= "Internal",
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(rx3715_nand_part),
+		.partitions	= rx3715_nand_part,
+	},
+};
+
+static struct s3c2410_platform_nand rx3715_nand_info = {
+	.tacls		= 25,
+	.twrph0		= 50,
+	.twrph1		= 15,
+	.nr_sets	= ARRAY_SIZE(rx3715_nand_sets),
+	.sets		= rx3715_nand_sets,
+};
+
+static struct platform_device *rx3715_devices[] __initdata = {
+	&s3c_device_usb,
+	&s3c_device_lcd,
+	&s3c_device_wdt,
+	&s3c_device_i2c,
+	&s3c_device_iis,
+	&s3c_device_nand,
+};
+
+static struct s3c24xx_board rx3715_board __initdata = {
+	.devices       = rx3715_devices,
+	.devices_count = ARRAY_SIZE(rx3715_devices)
+};
+
+static void __init rx3715_map_io(void)
+{
+	s3c_device_nand.dev.platform_data = &rx3715_nand_info;
+
+	s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
+	s3c24xx_init_clocks(16934000);
+	s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
+	s3c24xx_set_board(&rx3715_board);
+}
+
+static void __init rx3715_init_irq(void)
+{
+	s3c24xx_init_irq();
+}
+
+static void __init rx3715_init_machine(void)
+{
+	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
+	s3c2410_pm_init();
+
+	s3c24xx_fb_set_platdata(&rx3715_lcdcfg);
+}
+
+
+MACHINE_START(RX3715, "IPAQ-RX3715")
+	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.map_io		= rx3715_map_io,
+	.init_irq	= rx3715_init_irq,
+	.init_machine	= rx3715_init_machine,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
new file mode 100644
index 0000000..270e42b
--- /dev/null
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -0,0 +1,208 @@
+/* linux/arch/arm/mach-s3c2440/mach-smdk2440.c
+ *
+ * Copyright (c) 2004,2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://www.fluff.org/ben/smdk2440/
+ *
+ * Thanks to Dimity Andric and TomTom for the loan of an SMDK2440.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/hardware/iomd.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+//#include <asm/debug-ll.h>
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-lcd.h>
+
+#include <asm/arch/idle.h>
+#include <asm/arch/fb.h>
+
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2440.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+#include <asm/plat-s3c24xx/common-smdk.h>
+
+static struct map_desc smdk2440_iodesc[] __initdata = {
+	/* ISA IO Space map (memory space selected by A24) */
+
+	{
+		.virtual	= (u32)S3C24XX_VA_ISA_WORD,
+		.pfn		= __phys_to_pfn(S3C2410_CS2),
+		.length		= 0x10000,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (u32)S3C24XX_VA_ISA_WORD + 0x10000,
+		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+		.length		= SZ_4M,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
+		.pfn		= __phys_to_pfn(S3C2410_CS2),
+		.length		= 0x10000,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
+		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+		.length		= SZ_4M,
+		.type		= MT_DEVICE,
+	}
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk2440_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	/* IR port */
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x43,
+		.ufcon	     = 0x51,
+	}
+};
+
+/* LCD driver info */
+
+static struct s3c2410fb_mach_info smdk2440_lcd_cfg __initdata = {
+	.regs	= {
+
+		.lcdcon1	= S3C2410_LCDCON1_TFT16BPP |
+				  S3C2410_LCDCON1_TFT |
+				  S3C2410_LCDCON1_CLKVAL(0x04),
+
+		.lcdcon2	= S3C2410_LCDCON2_VBPD(7) |
+				  S3C2410_LCDCON2_LINEVAL(319) |
+				  S3C2410_LCDCON2_VFPD(6) |
+				  S3C2410_LCDCON2_VSPW(3),
+
+		.lcdcon3	= S3C2410_LCDCON3_HBPD(19) |
+				  S3C2410_LCDCON3_HOZVAL(239) |
+				  S3C2410_LCDCON3_HFPD(7),
+
+		.lcdcon4	= S3C2410_LCDCON4_MVAL(0) |
+				  S3C2410_LCDCON4_HSPW(3),
+
+		.lcdcon5	= S3C2410_LCDCON5_FRM565 |
+				  S3C2410_LCDCON5_INVVLINE |
+				  S3C2410_LCDCON5_INVVFRAME |
+				  S3C2410_LCDCON5_PWREN |
+				  S3C2410_LCDCON5_HWSWP,
+	},
+
+#if 0
+	/* currently setup by downloader */
+	.gpccon		= 0xaa940659,
+	.gpccon_mask	= 0xffffffff,
+	.gpcup		= 0x0000ffff,
+	.gpcup_mask	= 0xffffffff,
+	.gpdcon		= 0xaa84aaa0,
+	.gpdcon_mask	= 0xffffffff,
+	.gpdup		= 0x0000faff,
+	.gpdup_mask	= 0xffffffff,
+#endif
+
+	.lpcsel		= ((0xCE6) & ~7) | 1<<4,
+
+	.width		= 240,
+	.height		= 320,
+
+	.xres		= {
+		.min	= 240,
+		.max	= 240,
+		.defval	= 240,
+	},
+
+	.yres		= {
+		.min	= 320,
+		.max	= 320,
+		.defval = 320,
+	},
+
+	.bpp		= {
+		.min	= 16,
+		.max	= 16,
+		.defval = 16,
+	},
+};
+
+static struct platform_device *smdk2440_devices[] __initdata = {
+	&s3c_device_usb,
+	&s3c_device_lcd,
+	&s3c_device_wdt,
+	&s3c_device_i2c,
+	&s3c_device_iis,
+};
+
+static struct s3c24xx_board smdk2440_board __initdata = {
+	.devices       = smdk2440_devices,
+	.devices_count = ARRAY_SIZE(smdk2440_devices)
+};
+
+static void __init smdk2440_map_io(void)
+{
+	s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
+	s3c24xx_init_clocks(16934400);
+	s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
+	s3c24xx_set_board(&smdk2440_board);
+}
+
+static void __init smdk2440_machine_init(void)
+{
+	s3c24xx_fb_set_platdata(&smdk2440_lcd_cfg);
+
+	smdk_machine_init();
+}
+
+MACHINE_START(S3C2440, "SMDK2440")
+	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+
+	.init_irq	= s3c24xx_init_irq,
+	.map_io		= smdk2440_map_io,
+	.init_machine	= smdk2440_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
new file mode 100644
index 0000000..90e1da6
--- /dev/null
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -0,0 +1,52 @@
+/* linux/arch/arm/mach-s3c2440/s3c2440.c
+ *
+ * Copyright (c) 2004-2006 Simtec Electronics
+ *   Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C2440 Mobile CPU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <asm/plat-s3c24xx/s3c2440.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+static struct sys_device s3c2440_sysdev = {
+	.cls		= &s3c2440_sysclass,
+};
+
+int __init s3c2440_init(void)
+{
+	printk("S3C2440: Initialising architecture\n");
+
+	/* change irq for watchdog */
+
+	s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
+	s3c_device_wdt.resource[1].end   = IRQ_S3C2440_WDT;
+
+	/* register our system device for everything else */
+
+	return sysdev_register(&s3c2440_sysdev);
+}
diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig
new file mode 100644
index 0000000..bf8d87a
--- /dev/null
+++ b/arch/arm/mach-s3c2442/Kconfig
@@ -0,0 +1,27 @@
+# arch/arm/mach-s3c2442/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config CPU_S3C2442
+	bool
+	depends on ARCH_S3C2420
+	select S3C2410_CLOCK
+	select S3C2410_GPIO
+	select S3C2410_PM if PM
+	select CPU_S3C244X
+	help
+	  Support for S3C2442 Samsung Mobile CPU based systems.
+
+
+menu "S3C2442 Machines"
+
+config SMDK2440_CPU2442
+	bool "SMDM2440 with S3C2442 CPU module"
+	depends on ARCH_S3C2440
+	select CPU_S3C2442
+
+
+endmenu
+
diff --git a/arch/arm/mach-s3c2442/Makefile b/arch/arm/mach-s3c2442/Makefile
new file mode 100644
index 0000000..2a909c6
--- /dev/null
+++ b/arch/arm/mach-s3c2442/Makefile
@@ -0,0 +1,16 @@
+# arch/arm/mach-s3c2442/Makefile
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
+obj-$(CONFIG_CPU_S3C2442)	+= clock.o
+
+# Machine support
+
diff --git a/arch/arm/mach-s3c2442/clock.c b/arch/arm/mach-s3c2442/clock.c
new file mode 100644
index 0000000..5b9e830
--- /dev/null
+++ b/arch/arm/mach-s3c2442/clock.c
@@ -0,0 +1,171 @@
+/* linux/arch/arm/mach-s3c2442/clock.c
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2442 Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+
+#include <asm/hardware.h>
+#include <asm/atomic.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-clock.h>
+
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+/* S3C2442 extended clock support */
+
+static unsigned long s3c2442_camif_upll_round(struct clk *clk,
+					      unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	int div;
+
+	if (rate > parent_rate)
+		return parent_rate;
+
+	div = parent_rate / rate;
+
+	if (div == 3)
+		return parent_rate / 3;
+
+	/* note, we remove the +/- 1 calculations for the divisor */
+
+	div /= 2;
+
+	if (div < 1)
+		div = 1;
+	else if (div > 16)
+		div = 16;
+
+	return parent_rate / (div * 2);
+}
+
+static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
+
+	rate = s3c2442_camif_upll_round(clk, rate);
+
+	camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3;
+
+	if (rate == parent_rate) {
+		camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL;
+	} else if ((parent_rate / rate) == 3) {
+		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
+		camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3;
+	} else {
+		camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK;
+		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
+		camdivn |= (((parent_rate / rate) / 2) - 1);
+	}
+
+	__raw_writel(camdivn, S3C2440_CAMDIVN);
+
+	return 0;
+}
+
+/* Extra S3C2442 clocks */
+
+static struct clk s3c2442_clk_cam = {
+	.name		= "camif",
+	.id		= -1,
+	.enable		= s3c2410_clkcon_enable,
+	.ctrlbit	= S3C2440_CLKCON_CAMERA,
+};
+
+static struct clk s3c2442_clk_cam_upll = {
+	.name		= "camif-upll",
+	.id		= -1,
+	.set_rate	= s3c2442_camif_upll_setrate,
+	.round_rate	= s3c2442_camif_upll_round,
+};
+
+static int s3c2442_clk_add(struct sys_device *sysdev)
+{
+	unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
+	unsigned long clkdivn;
+	struct clk *clock_h;
+	struct clk *clock_p;
+	struct clk *clock_upll;
+
+	printk("S3C2442: Clock Support, DVS %s\n",
+	       (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
+
+	clock_p = clk_get(NULL, "pclk");
+	clock_h = clk_get(NULL, "hclk");
+	clock_upll = clk_get(NULL, "upll");
+
+	if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
+		printk(KERN_ERR "S3C2442: Failed to get parent clocks\n");
+		return -EINVAL;
+	}
+
+	/* check rate of UPLL, and if it is near 96MHz, then change
+	 * to using half the UPLL rate for the system */
+
+	if (clk_get_rate(clock_upll) > (94 * MHZ)) {
+		clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
+
+		mutex_lock(&clocks_mutex);
+
+		clkdivn = __raw_readl(S3C2410_CLKDIVN);
+		clkdivn |= S3C2440_CLKDIVN_UCLK;
+		__raw_writel(clkdivn, S3C2410_CLKDIVN);
+
+		mutex_unlock(&clocks_mutex);
+	}
+
+	s3c2442_clk_cam.parent = clock_h;
+	s3c2442_clk_cam_upll.parent = clock_upll;
+
+	s3c24xx_register_clock(&s3c2442_clk_cam);
+	s3c24xx_register_clock(&s3c2442_clk_cam_upll);
+
+	clk_disable(&s3c2442_clk_cam);
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2442_clk_driver = {
+	.add	= s3c2442_clk_add,
+};
+
+static __init int s3c2442_clk_init(void)
+{
+	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_clk_driver);
+}
+
+arch_initcall(s3c2442_clk_init);
diff --git a/arch/arm/mach-s3c2442/s3c2442.c b/arch/arm/mach-s3c2442/s3c2442.c
new file mode 100644
index 0000000..fbf8264
--- /dev/null
+++ b/arch/arm/mach-s3c2442/s3c2442.c
@@ -0,0 +1,34 @@
+/* linux/arch/arm/mach-s3c2442/s3c2442.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *   Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C2442 Mobile CPU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/sysdev.h>
+
+#include <asm/plat-s3c24xx/s3c2442.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+static struct sys_device s3c2442_sysdev = {
+	.cls		= &s3c2442_sysclass,
+};
+
+int __init s3c2442_init(void)
+{
+	printk("S3C2442: Initialising architecture\n");
+
+	return sysdev_register(&s3c2442_sysdev);
+}
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
new file mode 100644
index 0000000..9781364
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -0,0 +1,96 @@
+# arch/arm/plat-s3c24xx/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config PLAT_S3C24XX
+	bool
+	depends on ARCH_S3C2410
+	default y
+	help
+	  Base platform code for any Samsung S3C device
+
+config CPU_S3C244X
+	bool
+	depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
+	help
+	  Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
+
+config PM_SIMTEC
+	bool
+	help
+	  Common power management code for systems that are
+	  compatible with the Simtec style of power management
+
+config S3C2410_BOOT_WATCHDOG
+	bool "S3C2410 Initialisation watchdog"
+	depends on ARCH_S3C2410 && S3C2410_WATCHDOG
+	help
+	  Say y to enable the watchdog during the kernel decompression
+	  stage. If the kernel fails to uncompress, then the watchdog
+	  will trigger a reset and the system should restart.
+
+config S3C2410_BOOT_ERROR_RESET
+	bool "S3C2410 Reboot on decompression error"
+	depends on ARCH_S3C2410
+	help
+	  Say y here to use the watchdog to reset the system if the
+	  kernel decompressor detects an error during decompression.
+
+config S3C2410_PM_DEBUG
+	bool "S3C2410 PM Suspend debug"
+	depends on ARCH_S3C2410 && PM
+	help
+	  Say Y here if you want verbose debugging from the PM Suspend and
+	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+	  for more information.
+
+config S3C2410_PM_CHECK
+	bool "S3C2410 PM Suspend Memory CRC"
+	depends on ARCH_S3C2410 && PM && CRC32
+	help
+ 	  Enable the PM code's memory area checksum over sleep. This option
+	  will generate CRCs of all blocks of memory, and store them before
+	  going to sleep. The blocks are then checked on resume for any
+	  errors.
+
+config S3C2410_PM_CHECK_CHUNKSIZE
+	int "S3C2410 PM Suspend CRC Chunksize (KiB)"
+	depends on ARCH_S3C2410 && PM && S3C2410_PM_CHECK
+	default 64
+	help
+	  Set the chunksize in Kilobytes of the CRC for checking memory
+	  corruption over suspend and resume. A smaller value will mean that
+	  the CRC data block will take more memory, but wil identify any
+	  faults with better precision.
+
+config S3C2410_LOWLEVEL_UART_PORT
+	int "S3C2410 UART to use for low-level messages"
+	default 0
+	help
+	  Choice of which UART port to use for the low-level messages,
+	  such as the `Uncompressing...` at start time. The value of
+	  this configuration should be between zero and two. The port
+	  must have been initialised by the boot-loader before use.
+
+config S3C2410_DMA
+	bool "S3C2410 DMA support"
+	depends on ARCH_S3C2410
+	help
+	  S3C2410 DMA support. This is needed for drivers like sound which
+	  use the S3C2410's DMA system to move data to and from the
+	  peripheral blocks.
+
+config S3C2410_DMA_DEBUG
+	bool "S3C2410 DMA support debug"
+	depends on ARCH_S3C2410 && S3C2410_DMA
+	help
+	  Enable debugging output for the DMA code. This option sends info
+	  to the kernel log, at priority KERN_DEBUG.
+
+config MACH_SMDK
+	bool
+	help
+	  Common machine code for SMDK2410 and SMDK2440
+
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
new file mode 100644
index 0000000..8e5ccaa
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -0,0 +1,30 @@
+# arch/arm/plat-s3c24xx/Makefile
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+
+# Core files
+
+obj-y				+= cpu.o
+obj-y				+= irq.o
+obj-y				+= devs.o
+obj-y				+= gpio.o
+obj-y				+= time.o
+obj-y				+= clock.o
+
+# Architecture dependant builds
+
+obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
+obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-irq.o
+obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
+obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_PM)		+= sleep.o
+obj-$(CONFIG_S3C2410_DMA)	+= dma.o
+obj-$(CONFIG_MACH_SMDK)		+= common-smdk.o
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
new file mode 100644
index 0000000..d3dc03a
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -0,0 +1,449 @@
+/* linux/arch/arm/plat-s3c24xx/clock.c
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX Core clock control support
+ *
+ * Based on, and code from linux/arch/arm/mach-versatile/clock.c
+ **
+ **  Copyright (C) 2004 ARM Limited.
+ **  Written by Deep Blue Solutions Limited.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-clock.h>
+#include <asm/arch/regs-gpio.h>
+
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+/* clock information */
+
+static LIST_HEAD(clocks);
+
+DEFINE_MUTEX(clocks_mutex);
+
+/* enable and disable calls for use with the clk struct */
+
+static int clk_null_enable(struct clk *clk, int enable)
+{
+	return 0;
+}
+
+/* Clock API calls */
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	struct clk *p;
+	struct clk *clk = ERR_PTR(-ENOENT);
+	int idno;
+
+	if (dev == NULL || dev->bus != &platform_bus_type)
+		idno = -1;
+	else
+		idno = to_platform_device(dev)->id;
+
+	mutex_lock(&clocks_mutex);
+
+	list_for_each_entry(p, &clocks, list) {
+		if (p->id == idno &&
+		    strcmp(id, p->name) == 0 &&
+		    try_module_get(p->owner)) {
+			clk = p;
+			break;
+		}
+	}
+
+	/* check for the case where a device was supplied, but the
+	 * clock that was being searched for is not device specific */
+
+	if (IS_ERR(clk)) {
+		list_for_each_entry(p, &clocks, list) {
+			if (p->id == -1 && strcmp(id, p->name) == 0 &&
+			    try_module_get(p->owner)) {
+				clk = p;
+				break;
+			}
+		}
+	}
+
+	mutex_unlock(&clocks_mutex);
+	return clk;
+}
+
+void clk_put(struct clk *clk)
+{
+	module_put(clk->owner);
+}
+
+int clk_enable(struct clk *clk)
+{
+	if (IS_ERR(clk) || clk == NULL)
+		return -EINVAL;
+
+	clk_enable(clk->parent);
+
+	mutex_lock(&clocks_mutex);
+
+	if ((clk->usage++) == 0)
+		(clk->enable)(clk, 1);
+
+	mutex_unlock(&clocks_mutex);
+	return 0;
+}
+
+void clk_disable(struct clk *clk)
+{
+	if (IS_ERR(clk) || clk == NULL)
+		return;
+
+	mutex_lock(&clocks_mutex);
+
+	if ((--clk->usage) == 0)
+		(clk->enable)(clk, 0);
+
+	mutex_unlock(&clocks_mutex);
+	clk_disable(clk->parent);
+}
+
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (IS_ERR(clk))
+		return 0;
+
+	if (clk->rate != 0)
+		return clk->rate;
+
+	if (clk->get_rate != NULL)
+		return (clk->get_rate)(clk);
+
+	if (clk->parent != NULL)
+		return clk_get_rate(clk->parent);
+
+	return clk->rate;
+}
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	if (!IS_ERR(clk) && clk->round_rate)
+		return (clk->round_rate)(clk, rate);
+
+	return rate;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int ret;
+
+	if (IS_ERR(clk))
+		return -EINVAL;
+
+	mutex_lock(&clocks_mutex);
+	ret = (clk->set_rate)(clk, rate);
+	mutex_unlock(&clocks_mutex);
+
+	return ret;
+}
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+	return clk->parent;
+}
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	int ret = 0;
+
+	if (IS_ERR(clk))
+		return -EINVAL;
+
+	mutex_lock(&clocks_mutex);
+
+	if (clk->set_parent)
+		ret = (clk->set_parent)(clk, parent);
+
+	mutex_unlock(&clocks_mutex);
+
+	return ret;
+}
+
+EXPORT_SYMBOL(clk_get);
+EXPORT_SYMBOL(clk_put);
+EXPORT_SYMBOL(clk_enable);
+EXPORT_SYMBOL(clk_disable);
+EXPORT_SYMBOL(clk_get_rate);
+EXPORT_SYMBOL(clk_round_rate);
+EXPORT_SYMBOL(clk_set_rate);
+EXPORT_SYMBOL(clk_get_parent);
+EXPORT_SYMBOL(clk_set_parent);
+
+/* base clocks */
+
+struct clk clk_xtal = {
+	.name		= "xtal",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+};
+
+struct clk clk_mpll = {
+	.name		= "mpll",
+	.id		= -1,
+};
+
+struct clk clk_upll = {
+	.name		= "upll",
+	.id		= -1,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+};
+
+struct clk clk_f = {
+	.name		= "fclk",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= &clk_mpll,
+	.ctrlbit	= 0,
+};
+
+struct clk clk_h = {
+	.name		= "hclk",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+};
+
+struct clk clk_p = {
+	.name		= "pclk",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+};
+
+struct clk clk_usb_bus = {
+	.name		= "usb-bus",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= &clk_upll,
+};
+
+/* clocks that could be registered by external code */
+
+static int s3c24xx_dclk_enable(struct clk *clk, int enable)
+{
+	unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON);
+
+	if (enable)
+		dclkcon |= clk->ctrlbit;
+	else
+		dclkcon &= ~clk->ctrlbit;
+
+	__raw_writel(dclkcon, S3C24XX_DCLKCON);
+
+	return 0;
+}
+
+static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
+{
+	unsigned long dclkcon;
+	unsigned int uclk;
+
+	if (parent == &clk_upll)
+		uclk = 1;
+	else if (parent == &clk_p)
+		uclk = 0;
+	else
+		return -EINVAL;
+
+	clk->parent = parent;
+
+	dclkcon = __raw_readl(S3C24XX_DCLKCON);
+
+	if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
+		if (uclk)
+			dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
+		else
+			dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
+	} else {
+		if (uclk)
+			dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
+		else
+			dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
+	}
+
+	__raw_writel(dclkcon, S3C24XX_DCLKCON);
+
+	return 0;
+}
+
+
+static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
+{
+	unsigned long mask;
+	unsigned long source;
+
+	/* calculate the MISCCR setting for the clock */
+
+	if (parent == &clk_xtal)
+		source = S3C2410_MISCCR_CLK0_MPLL;
+	else if (parent == &clk_upll)
+		source = S3C2410_MISCCR_CLK0_UPLL;
+	else if (parent == &clk_f)
+		source = S3C2410_MISCCR_CLK0_FCLK;
+	else if (parent == &clk_h)
+		source = S3C2410_MISCCR_CLK0_HCLK;
+	else if (parent == &clk_p)
+		source = S3C2410_MISCCR_CLK0_PCLK;
+	else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
+		source = S3C2410_MISCCR_CLK0_DCLK0;
+	else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
+		source = S3C2410_MISCCR_CLK0_DCLK0;
+	else
+		return -EINVAL;
+
+	clk->parent = parent;
+
+	if (clk == &s3c24xx_dclk0)
+		mask = S3C2410_MISCCR_CLK0_MASK;
+	else {
+		source <<= 4;
+		mask = S3C2410_MISCCR_CLK1_MASK;
+	}
+
+	s3c2410_modify_misccr(mask, source);
+	return 0;
+}
+
+/* external clock definitions */
+
+struct clk s3c24xx_dclk0 = {
+	.name		= "dclk0",
+	.id		= -1,
+	.ctrlbit	= S3C2410_DCLKCON_DCLK0EN,
+	.enable	        = s3c24xx_dclk_enable,
+	.set_parent	= s3c24xx_dclk_setparent,
+};
+
+struct clk s3c24xx_dclk1 = {
+	.name		= "dclk1",
+	.id		= -1,
+	.ctrlbit	= S3C2410_DCLKCON_DCLK0EN,
+	.enable		= s3c24xx_dclk_enable,
+	.set_parent	= s3c24xx_dclk_setparent,
+};
+
+struct clk s3c24xx_clkout0 = {
+	.name		= "clkout0",
+	.id		= -1,
+	.set_parent	= s3c24xx_clkout_setparent,
+};
+
+struct clk s3c24xx_clkout1 = {
+	.name		= "clkout1",
+	.id		= -1,
+	.set_parent	= s3c24xx_clkout_setparent,
+};
+
+struct clk s3c24xx_uclk = {
+	.name		= "uclk",
+	.id		= -1,
+};
+
+/* initialise the clock system */
+
+int s3c24xx_register_clock(struct clk *clk)
+{
+	clk->owner = THIS_MODULE;
+
+	if (clk->enable == NULL)
+		clk->enable = clk_null_enable;
+
+	/* add to the list of available clocks */
+
+	mutex_lock(&clocks_mutex);
+	list_add(&clk->list, &clocks);
+	mutex_unlock(&clocks_mutex);
+
+	return 0;
+}
+
+/* initalise all the clocks */
+
+int __init s3c24xx_setup_clocks(unsigned long xtal,
+				unsigned long fclk,
+				unsigned long hclk,
+				unsigned long pclk)
+{
+	printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n");
+
+	/* initialise the main system clocks */
+
+	clk_xtal.rate = xtal;
+	clk_upll.rate = s3c2410_get_pll(__raw_readl(S3C2410_UPLLCON), xtal);
+
+	clk_mpll.rate = fclk;
+	clk_h.rate = hclk;
+	clk_p.rate = pclk;
+	clk_f.rate = fclk;
+
+	/* assume uart clocks are correctly setup */
+
+	/* register our clocks */
+
+	if (s3c24xx_register_clock(&clk_xtal) < 0)
+		printk(KERN_ERR "failed to register master xtal\n");
+
+	if (s3c24xx_register_clock(&clk_mpll) < 0)
+		printk(KERN_ERR "failed to register mpll clock\n");
+
+	if (s3c24xx_register_clock(&clk_upll) < 0)
+		printk(KERN_ERR "failed to register upll clock\n");
+
+	if (s3c24xx_register_clock(&clk_f) < 0)
+		printk(KERN_ERR "failed to register cpu fclk\n");
+
+	if (s3c24xx_register_clock(&clk_h) < 0)
+		printk(KERN_ERR "failed to register cpu hclk\n");
+
+	if (s3c24xx_register_clock(&clk_p) < 0)
+		printk(KERN_ERR "failed to register cpu pclk\n");
+
+	return 0;
+}
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
new file mode 100644
index 0000000..908efa7
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -0,0 +1,200 @@
+/* linux/arch/arm/plat-s3c24xx/common-smdk.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Common code for SMDK2410 and SMDK2440 boards
+ *
+ * http://www.fluff.org/ben/smdk2440/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/leds-gpio.h>
+
+#include <asm/arch/nand.h>
+
+#include <asm/plat-s3c24xx/common-smdk.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/pm.h>
+
+/* LED devices */
+
+static struct s3c24xx_led_platdata smdk_pdata_led4 = {
+	.gpio		= S3C2410_GPF4,
+	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+	.name		= "led4",
+	.def_trigger	= "timer",
+};
+
+static struct s3c24xx_led_platdata smdk_pdata_led5 = {
+	.gpio		= S3C2410_GPF5,
+	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+	.name		= "led5",
+	.def_trigger	= "nand-disk",
+};
+
+static struct s3c24xx_led_platdata smdk_pdata_led6 = {
+	.gpio		= S3C2410_GPF6,
+	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+	.name		= "led6",
+};
+
+static struct s3c24xx_led_platdata smdk_pdata_led7 = {
+	.gpio		= S3C2410_GPF7,
+	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+	.name		= "led7",
+};
+
+static struct platform_device smdk_led4 = {
+	.name		= "s3c24xx_led",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &smdk_pdata_led4,
+	},
+};
+
+static struct platform_device smdk_led5 = {
+	.name		= "s3c24xx_led",
+	.id		= 1,
+	.dev		= {
+		.platform_data = &smdk_pdata_led5,
+	},
+};
+
+static struct platform_device smdk_led6 = {
+	.name		= "s3c24xx_led",
+	.id		= 2,
+	.dev		= {
+		.platform_data = &smdk_pdata_led6,
+	},
+};
+
+static struct platform_device smdk_led7 = {
+	.name		= "s3c24xx_led",
+	.id		= 3,
+	.dev		= {
+		.platform_data = &smdk_pdata_led7,
+	},
+};
+
+/* NAND parititon from 2.4.18-swl5 */
+
+static struct mtd_partition smdk_default_nand_part[] = {
+	[0] = {
+		.name	= "Boot Agent",
+		.size	= SZ_16K,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "S3C2410 flash partition 1",
+		.offset = 0,
+		.size	= SZ_2M,
+	},
+	[2] = {
+		.name	= "S3C2410 flash partition 2",
+		.offset = SZ_4M,
+		.size	= SZ_4M,
+	},
+	[3] = {
+		.name	= "S3C2410 flash partition 3",
+		.offset	= SZ_8M,
+		.size	= SZ_2M,
+	},
+	[4] = {
+		.name	= "S3C2410 flash partition 4",
+		.offset = SZ_1M * 10,
+		.size	= SZ_4M,
+	},
+	[5] = {
+		.name	= "S3C2410 flash partition 5",
+		.offset	= SZ_1M * 14,
+		.size	= SZ_1M * 10,
+	},
+	[6] = {
+		.name	= "S3C2410 flash partition 6",
+		.offset	= SZ_1M * 24,
+		.size	= SZ_1M * 24,
+	},
+	[7] = {
+		.name	= "S3C2410 flash partition 7",
+		.offset = SZ_1M * 48,
+		.size	= SZ_16M,
+	}
+};
+
+static struct s3c2410_nand_set smdk_nand_sets[] = {
+	[0] = {
+		.name		= "NAND",
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(smdk_default_nand_part),
+		.partitions	= smdk_default_nand_part,
+	},
+};
+
+/* choose a set of timings which should suit most 512Mbit
+ * chips and beyond.
+*/
+
+static struct s3c2410_platform_nand smdk_nand_info = {
+	.tacls		= 20,
+	.twrph0		= 60,
+	.twrph1		= 20,
+	.nr_sets	= ARRAY_SIZE(smdk_nand_sets),
+	.sets		= smdk_nand_sets,
+};
+
+/* devices we initialise */
+
+static struct platform_device __initdata *smdk_devs[] = {
+	&s3c_device_nand,
+	&smdk_led4,
+	&smdk_led5,
+	&smdk_led6,
+	&smdk_led7,
+};
+
+void __init smdk_machine_init(void)
+{
+	/* Configure the LEDs (even if we have no LED support)*/
+
+	s3c2410_gpio_cfgpin(S3C2410_GPF4, S3C2410_GPF4_OUTP);
+	s3c2410_gpio_cfgpin(S3C2410_GPF5, S3C2410_GPF5_OUTP);
+	s3c2410_gpio_cfgpin(S3C2410_GPF6, S3C2410_GPF6_OUTP);
+	s3c2410_gpio_cfgpin(S3C2410_GPF7, S3C2410_GPF7_OUTP);
+
+	s3c2410_gpio_setpin(S3C2410_GPF4, 1);
+	s3c2410_gpio_setpin(S3C2410_GPF5, 1);
+	s3c2410_gpio_setpin(S3C2410_GPF6, 1);
+	s3c2410_gpio_setpin(S3C2410_GPF7, 1);
+
+	s3c_device_nand.dev.platform_data = &smdk_nand_info;
+
+	platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));
+
+	s3c2410_pm_init();
+}
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
new file mode 100644
index 0000000..2fbb749
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -0,0 +1,357 @@
+/* linux/arch/arm/plat-s3c24xx/cpu.c
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/SWLINUX/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-serial.h>
+
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/s3c2400.h>
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2412.h>
+#include "s3c244x.h"
+#include <asm/plat-s3c24xx/s3c2440.h>
+#include <asm/plat-s3c24xx/s3c2442.h>
+
+struct cpu_table {
+	unsigned long	idcode;
+	unsigned long	idmask;
+	void		(*map_io)(struct map_desc *mach_desc, int size);
+	void		(*init_uarts)(struct s3c2410_uartcfg *cfg, int no);
+	void		(*init_clocks)(int xtal);
+	int		(*init)(void);
+	const char	*name;
+};
+
+/* table of supported CPUs */
+
+static const char name_s3c2400[]  = "S3C2400";
+static const char name_s3c2410[]  = "S3C2410";
+static const char name_s3c2412[]  = "S3C2412";
+static const char name_s3c2440[]  = "S3C2440";
+static const char name_s3c2442[]  = "S3C2442";
+static const char name_s3c2410a[] = "S3C2410A";
+static const char name_s3c2440a[] = "S3C2440A";
+
+static struct cpu_table cpu_ids[] __initdata = {
+	{
+		.idcode		= 0x32410000,
+		.idmask		= 0xffffffff,
+		.map_io		= s3c2410_map_io,
+		.init_clocks	= s3c2410_init_clocks,
+		.init_uarts	= s3c2410_init_uarts,
+		.init		= s3c2410_init,
+		.name		= name_s3c2410
+	},
+	{
+		.idcode		= 0x32410002,
+		.idmask		= 0xffffffff,
+		.map_io		= s3c2410_map_io,
+		.init_clocks	= s3c2410_init_clocks,
+		.init_uarts	= s3c2410_init_uarts,
+		.init		= s3c2410_init,
+		.name		= name_s3c2410a
+	},
+	{
+		.idcode		= 0x32440000,
+		.idmask		= 0xffffffff,
+		.map_io		= s3c244x_map_io,
+		.init_clocks	= s3c244x_init_clocks,
+		.init_uarts	= s3c244x_init_uarts,
+		.init		= s3c2440_init,
+		.name		= name_s3c2440
+	},
+	{
+		.idcode		= 0x32440001,
+		.idmask		= 0xffffffff,
+		.map_io		= s3c244x_map_io,
+		.init_clocks	= s3c244x_init_clocks,
+		.init_uarts	= s3c244x_init_uarts,
+		.init		= s3c2440_init,
+		.name		= name_s3c2440a
+	},
+	{
+		.idcode		= 0x32440aaa,
+		.idmask		= 0xffffffff,
+		.map_io		= s3c244x_map_io,
+		.init_clocks	= s3c244x_init_clocks,
+		.init_uarts	= s3c244x_init_uarts,
+		.init		= s3c2442_init,
+		.name		= name_s3c2442
+	},
+	{
+		.idcode		= 0x32412001,
+		.idmask		= 0xffffffff,
+		.map_io		= s3c2412_map_io,
+		.init_clocks	= s3c2412_init_clocks,
+		.init_uarts	= s3c2412_init_uarts,
+		.init		= s3c2412_init,
+		.name		= name_s3c2412,
+	},
+	{			/* a newer version of the s3c2412 */
+		.idcode		= 0x32412003,
+		.idmask		= 0xffffffff,
+		.map_io		= s3c2412_map_io,
+		.init_clocks	= s3c2412_init_clocks,
+		.init_uarts	= s3c2412_init_uarts,
+		.init		= s3c2412_init,
+		.name		= name_s3c2412,
+	},
+	{
+		.idcode		= 0x0,   /* S3C2400 doesn't have an idcode */
+		.idmask		= 0xffffffff,
+		.map_io		= s3c2400_map_io,
+		.init_clocks	= s3c2400_init_clocks,
+		.init_uarts	= s3c2400_init_uarts,
+		.init		= s3c2400_init,
+		.name		= name_s3c2400
+	},
+};
+
+/* minimal IO mapping */
+
+static struct map_desc s3c_iodesc[] __initdata = {
+	IODESC_ENT(GPIO),
+	IODESC_ENT(IRQ),
+	IODESC_ENT(MEMCTRL),
+	IODESC_ENT(UART)
+};
+
+
+static struct cpu_table *
+s3c_lookup_cpu(unsigned long idcode)
+{
+	struct cpu_table *tab;
+	int count;
+
+	tab = cpu_ids;
+	for (count = 0; count < ARRAY_SIZE(cpu_ids); count++, tab++) {
+		if ((idcode & tab->idmask) == tab->idcode)
+			return tab;
+	}
+
+	return NULL;
+}
+
+/* board information */
+
+static struct s3c24xx_board *board;
+
+void s3c24xx_set_board(struct s3c24xx_board *b)
+{
+	int i;
+
+	board = b;
+
+	if (b->clocks_count != 0) {
+		struct clk **ptr = b->clocks;
+
+		for (i = b->clocks_count; i > 0; i--, ptr++)
+			s3c24xx_register_clock(*ptr);
+	}
+}
+
+/* cpu information */
+
+static struct cpu_table *cpu;
+
+static unsigned long s3c24xx_read_idcode_v5(void)
+{
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+	return __raw_readl(S3C2412_GSTATUS1);
+#else
+	return 1UL;	/* don't look like an 2400 */
+#endif
+}
+
+static unsigned long s3c24xx_read_idcode_v4(void)
+{
+#ifndef CONFIG_CPU_S3C2400
+	return __raw_readl(S3C2410_GSTATUS1);
+#else
+	return 0UL;
+#endif
+}
+
+void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
+{
+	unsigned long idcode = 0x0;
+
+	/* initialise the io descriptors we need for initialisation */
+	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
+
+	if (cpu_architecture() >= CPU_ARCH_ARMv5) {
+		idcode = s3c24xx_read_idcode_v5();
+	} else {
+		idcode = s3c24xx_read_idcode_v4();
+	}
+
+	cpu = s3c_lookup_cpu(idcode);
+
+	if (cpu == NULL) {
+		printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode);
+		panic("Unknown S3C24XX CPU");
+	}
+
+	printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
+
+	if (cpu->map_io == NULL || cpu->init == NULL) {
+		printk(KERN_ERR "CPU %s support not enabled\n", cpu->name);
+		panic("Unsupported S3C24XX CPU");
+	}
+
+	(cpu->map_io)(mach_desc, size);
+}
+
+/* s3c24xx_init_clocks
+ *
+ * Initialise the clock subsystem and associated information from the
+ * given master crystal value.
+ *
+ * xtal  = 0 -> use default PLL crystal value (normally 12MHz)
+ *      != 0 -> PLL crystal value in Hz
+*/
+
+void __init s3c24xx_init_clocks(int xtal)
+{
+	if (xtal == 0)
+		xtal = 12*1000*1000;
+
+	if (cpu == NULL)
+		panic("s3c24xx_init_clocks: no cpu setup?\n");
+
+	if (cpu->init_clocks == NULL)
+		panic("s3c24xx_init_clocks: cpu has no clock init\n");
+	else
+		(cpu->init_clocks)(xtal);
+}
+
+/* uart management */
+
+static int nr_uarts __initdata = 0;
+
+static struct s3c2410_uartcfg uart_cfgs[3];
+
+/* s3c24xx_init_uartdevs
+ *
+ * copy the specified platform data and configuration into our central
+ * set of devices, before the data is thrown away after the init process.
+ *
+ * This also fills in the array passed to the serial driver for the
+ * early initialisation of the console.
+*/
+
+void __init s3c24xx_init_uartdevs(char *name,
+				  struct s3c24xx_uart_resources *res,
+				  struct s3c2410_uartcfg *cfg, int no)
+{
+	struct platform_device *platdev;
+	struct s3c2410_uartcfg *cfgptr = uart_cfgs;
+	struct s3c24xx_uart_resources *resp;
+	int uart;
+
+	memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no);
+
+	for (uart = 0; uart < no; uart++, cfg++, cfgptr++) {
+		platdev = s3c24xx_uart_src[cfgptr->hwport];
+
+		resp = res + cfgptr->hwport;
+
+		s3c24xx_uart_devs[uart] = platdev;
+
+		platdev->name = name;
+		platdev->resource = resp->resources;
+		platdev->num_resources = resp->nr_resources;
+
+		platdev->dev.platform_data = cfgptr;
+	}
+
+	nr_uarts = no;
+}
+
+void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	if (cpu == NULL)
+		return;
+
+	if (cpu->init_uarts == NULL) {
+		printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n");
+	} else
+		(cpu->init_uarts)(cfg, no);
+}
+
+static int __init s3c_arch_init(void)
+{
+	int ret;
+
+	// do the correct init for cpu
+
+	if (cpu == NULL)
+		panic("s3c_arch_init: NULL cpu\n");
+
+	ret = (cpu->init)();
+	if (ret != 0)
+		return ret;
+
+	ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts);
+	if (ret != 0)
+		return ret;
+
+	if (board != NULL) {
+		struct platform_device **ptr = board->devices;
+		int i;
+
+		for (i = 0; i < board->devices_count; i++, ptr++) {
+			ret = platform_device_register(*ptr);
+
+			if (ret) {
+				printk(KERN_ERR "s3c24xx: failed to add board device %s (%d) @%p\n", (*ptr)->name, ret, *ptr);
+			}
+		}
+
+		/* mask any error, we may not need all these board
+		 * devices */
+		ret = 0;
+	}
+
+	return ret;
+}
+
+arch_initcall(s3c_arch_init);
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
new file mode 100644
index 0000000..6d46c4e
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -0,0 +1,585 @@
+/* linux/arch/arm/plat-s3c24xx/devs.c
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Base S3C24XX platform device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/arch/fb.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <asm/arch/regs-serial.h>
+
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+/* Serial port registrations */
+
+static struct resource s3c2410_uart0_resource[] = {
+	[0] = {
+		.start = S3C2410_PA_UART0,
+		.end   = S3C2410_PA_UART0 + 0x3fff,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_S3CUART_RX0,
+		.end   = IRQ_S3CUART_ERR0,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct resource s3c2410_uart1_resource[] = {
+	[0] = {
+		.start = S3C2410_PA_UART1,
+		.end   = S3C2410_PA_UART1 + 0x3fff,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_S3CUART_RX1,
+		.end   = IRQ_S3CUART_ERR1,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct resource s3c2410_uart2_resource[] = {
+	[0] = {
+		.start = S3C2410_PA_UART2,
+		.end   = S3C2410_PA_UART2 + 0x3fff,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_S3CUART_RX2,
+		.end   = IRQ_S3CUART_ERR2,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
+	[0] = {
+		.resources	= s3c2410_uart0_resource,
+		.nr_resources	= ARRAY_SIZE(s3c2410_uart0_resource),
+	},
+	[1] = {
+		.resources	= s3c2410_uart1_resource,
+		.nr_resources	= ARRAY_SIZE(s3c2410_uart1_resource),
+	},
+	[2] = {
+		.resources	= s3c2410_uart2_resource,
+		.nr_resources	= ARRAY_SIZE(s3c2410_uart2_resource),
+	},
+};
+
+/* yart devices */
+
+static struct platform_device s3c24xx_uart_device0 = {
+	.id		= 0,
+};
+
+static struct platform_device s3c24xx_uart_device1 = {
+	.id		= 1,
+};
+
+static struct platform_device s3c24xx_uart_device2 = {
+	.id		= 2,
+};
+
+struct platform_device *s3c24xx_uart_src[3] = {
+	&s3c24xx_uart_device0,
+	&s3c24xx_uart_device1,
+	&s3c24xx_uart_device2,
+};
+
+struct platform_device *s3c24xx_uart_devs[3] = {
+};
+
+/* USB Host Controller */
+
+static struct resource s3c_usb_resource[] = {
+	[0] = {
+		.start = S3C24XX_PA_USBHOST,
+		.end   = S3C24XX_PA_USBHOST + S3C24XX_SZ_USBHOST - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBH,
+		.end   = IRQ_USBH,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 s3c_device_usb_dmamask = 0xffffffffUL;
+
+struct platform_device s3c_device_usb = {
+	.name		  = "s3c2410-ohci",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_usb_resource),
+	.resource	  = s3c_usb_resource,
+	.dev              = {
+		.dma_mask = &s3c_device_usb_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+EXPORT_SYMBOL(s3c_device_usb);
+
+/* LCD Controller */
+
+static struct resource s3c_lcd_resource[] = {
+	[0] = {
+		.start = S3C24XX_PA_LCD,
+		.end   = S3C24XX_PA_LCD + S3C24XX_SZ_LCD - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_LCD,
+		.end   = IRQ_LCD,
+		.flags = IORESOURCE_IRQ,
+	}
+
+};
+
+static u64 s3c_device_lcd_dmamask = 0xffffffffUL;
+
+struct platform_device s3c_device_lcd = {
+	.name		  = "s3c2410-lcd",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_lcd_resource),
+	.resource	  = s3c_lcd_resource,
+	.dev              = {
+		.dma_mask		= &s3c_device_lcd_dmamask,
+		.coherent_dma_mask	= 0xffffffffUL
+	}
+};
+
+EXPORT_SYMBOL(s3c_device_lcd);
+
+void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
+{
+	struct s3c2410fb_mach_info *npd;
+
+	npd = kmalloc(sizeof(*npd), GFP_KERNEL);
+	if (npd) {
+		memcpy(npd, pd, sizeof(*npd));
+		s3c_device_lcd.dev.platform_data = npd;
+	} else {
+		printk(KERN_ERR "no memory for LCD platform data\n");
+	}
+}
+
+/* NAND Controller */
+
+static struct resource s3c_nand_resource[] = {
+	[0] = {
+		.start = S3C2410_PA_NAND,
+		.end   = S3C2410_PA_NAND + S3C24XX_SZ_NAND - 1,
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+struct platform_device s3c_device_nand = {
+	.name		  = "s3c2410-nand",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_nand_resource),
+	.resource	  = s3c_nand_resource,
+};
+
+EXPORT_SYMBOL(s3c_device_nand);
+
+/* USB Device (Gadget)*/
+
+static struct resource s3c_usbgadget_resource[] = {
+	[0] = {
+		.start = S3C24XX_PA_USBDEV,
+		.end   = S3C24XX_PA_USBDEV + S3C24XX_SZ_USBDEV - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBD,
+		.end   = IRQ_USBD,
+		.flags = IORESOURCE_IRQ,
+	}
+
+};
+
+struct platform_device s3c_device_usbgadget = {
+	.name		  = "s3c2410-usbgadget",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_usbgadget_resource),
+	.resource	  = s3c_usbgadget_resource,
+};
+
+EXPORT_SYMBOL(s3c_device_usbgadget);
+
+/* Watchdog */
+
+static struct resource s3c_wdt_resource[] = {
+	[0] = {
+		.start = S3C24XX_PA_WATCHDOG,
+		.end   = S3C24XX_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_WDT,
+		.end   = IRQ_WDT,
+		.flags = IORESOURCE_IRQ,
+	}
+
+};
+
+struct platform_device s3c_device_wdt = {
+	.name		  = "s3c2410-wdt",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_wdt_resource),
+	.resource	  = s3c_wdt_resource,
+};
+
+EXPORT_SYMBOL(s3c_device_wdt);
+
+/* I2C */
+
+static struct resource s3c_i2c_resource[] = {
+	[0] = {
+		.start = S3C24XX_PA_IIC,
+		.end   = S3C24XX_PA_IIC + S3C24XX_SZ_IIC - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_IIC,
+		.end   = IRQ_IIC,
+		.flags = IORESOURCE_IRQ,
+	}
+
+};
+
+struct platform_device s3c_device_i2c = {
+	.name		  = "s3c2410-i2c",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_i2c_resource),
+	.resource	  = s3c_i2c_resource,
+};
+
+EXPORT_SYMBOL(s3c_device_i2c);
+
+/* IIS */
+
+static struct resource s3c_iis_resource[] = {
+	[0] = {
+		.start = S3C24XX_PA_IIS,
+		.end   = S3C24XX_PA_IIS + S3C24XX_SZ_IIS -1,
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+static u64 s3c_device_iis_dmamask = 0xffffffffUL;
+
+struct platform_device s3c_device_iis = {
+	.name		  = "s3c2410-iis",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_iis_resource),
+	.resource	  = s3c_iis_resource,
+	.dev              = {
+		.dma_mask = &s3c_device_iis_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+EXPORT_SYMBOL(s3c_device_iis);
+
+/* RTC */
+
+static struct resource s3c_rtc_resource[] = {
+	[0] = {
+		.start = S3C24XX_PA_RTC,
+		.end   = S3C24XX_PA_RTC + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_RTC,
+		.end   = IRQ_RTC,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start = IRQ_TICK,
+		.end   = IRQ_TICK,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+struct platform_device s3c_device_rtc = {
+	.name		  = "s3c2410-rtc",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_rtc_resource),
+	.resource	  = s3c_rtc_resource,
+};
+
+EXPORT_SYMBOL(s3c_device_rtc);
+
+/* ADC */
+
+static struct resource s3c_adc_resource[] = {
+	[0] = {
+		.start = S3C24XX_PA_ADC,
+		.end   = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TC,
+		.end   = IRQ_TC,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start = IRQ_ADC,
+		.end   = IRQ_ADC,
+		.flags = IORESOURCE_IRQ,
+	}
+
+};
+
+struct platform_device s3c_device_adc = {
+	.name		  = "s3c2410-adc",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_adc_resource),
+	.resource	  = s3c_adc_resource,
+};
+
+/* SDI */
+
+static struct resource s3c_sdi_resource[] = {
+	[0] = {
+		.start = S3C2410_PA_SDI,
+		.end   = S3C2410_PA_SDI + S3C24XX_SZ_SDI - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_SDI,
+		.end   = IRQ_SDI,
+		.flags = IORESOURCE_IRQ,
+	}
+
+};
+
+struct platform_device s3c_device_sdi = {
+	.name		  = "s3c2410-sdi",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_sdi_resource),
+	.resource	  = s3c_sdi_resource,
+};
+
+EXPORT_SYMBOL(s3c_device_sdi);
+
+/* SPI (0) */
+
+static struct resource s3c_spi0_resource[] = {
+	[0] = {
+		.start = S3C24XX_PA_SPI,
+		.end   = S3C24XX_PA_SPI + 0x1f,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
+		.flags = IORESOURCE_IRQ,
+	}
+
+};
+
+static u64 s3c_device_spi0_dmamask = 0xffffffffUL;
+
+struct platform_device s3c_device_spi0 = {
+	.name		  = "s3c2410-spi",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s3c_spi0_resource),
+	.resource	  = s3c_spi0_resource,
+        .dev              = {
+                .dma_mask = &s3c_device_spi0_dmamask,
+                .coherent_dma_mask = 0xffffffffUL
+        }
+};
+
+EXPORT_SYMBOL(s3c_device_spi0);
+
+/* SPI (1) */
+
+static struct resource s3c_spi1_resource[] = {
+	[0] = {
+		.start = S3C24XX_PA_SPI + 0x20,
+		.end   = S3C24XX_PA_SPI + 0x20 + 0x1f,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
+		.flags = IORESOURCE_IRQ,
+	}
+
+};
+
+static u64 s3c_device_spi1_dmamask = 0xffffffffUL;
+
+struct platform_device s3c_device_spi1 = {
+	.name		  = "s3c2410-spi",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s3c_spi1_resource),
+	.resource	  = s3c_spi1_resource,
+        .dev              = {
+                .dma_mask = &s3c_device_spi1_dmamask,
+                .coherent_dma_mask = 0xffffffffUL
+        }
+};
+
+EXPORT_SYMBOL(s3c_device_spi1);
+
+/* pwm timer blocks */
+
+static struct resource s3c_timer0_resource[] = {
+	[0] = {
+		.start = S3C24XX_PA_TIMER + 0x0C,
+		.end   = S3C24XX_PA_TIMER + 0x0C + 0xB,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TIMER0,
+		.end   = IRQ_TIMER0,
+		.flags = IORESOURCE_IRQ,
+	}
+
+};
+
+struct platform_device s3c_device_timer0 = {
+	.name		  = "s3c2410-timer",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s3c_timer0_resource),
+	.resource	  = s3c_timer0_resource,
+};
+
+EXPORT_SYMBOL(s3c_device_timer0);
+
+/* timer 1 */
+
+static struct resource s3c_timer1_resource[] = {
+	[0] = {
+		.start = S3C24XX_PA_TIMER + 0x18,
+		.end   = S3C24XX_PA_TIMER + 0x23,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TIMER1,
+		.end   = IRQ_TIMER1,
+		.flags = IORESOURCE_IRQ,
+	}
+
+};
+
+struct platform_device s3c_device_timer1 = {
+	.name		  = "s3c2410-timer",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s3c_timer1_resource),
+	.resource	  = s3c_timer1_resource,
+};
+
+EXPORT_SYMBOL(s3c_device_timer1);
+
+/* timer 2 */
+
+static struct resource s3c_timer2_resource[] = {
+	[0] = {
+		.start = S3C24XX_PA_TIMER + 0x24,
+		.end   = S3C24XX_PA_TIMER + 0x2F,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TIMER2,
+		.end   = IRQ_TIMER2,
+		.flags = IORESOURCE_IRQ,
+	}
+
+};
+
+struct platform_device s3c_device_timer2 = {
+	.name		  = "s3c2410-timer",
+	.id		  = 2,
+	.num_resources	  = ARRAY_SIZE(s3c_timer2_resource),
+	.resource	  = s3c_timer2_resource,
+};
+
+EXPORT_SYMBOL(s3c_device_timer2);
+
+/* timer 3 */
+
+static struct resource s3c_timer3_resource[] = {
+	[0] = {
+		.start = S3C24XX_PA_TIMER + 0x30,
+		.end   = S3C24XX_PA_TIMER + 0x3B,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TIMER3,
+		.end   = IRQ_TIMER3,
+		.flags = IORESOURCE_IRQ,
+	}
+
+};
+
+struct platform_device s3c_device_timer3 = {
+	.name		  = "s3c2410-timer",
+	.id		  = 3,
+	.num_resources	  = ARRAY_SIZE(s3c_timer3_resource),
+	.resource	  = s3c_timer3_resource,
+};
+
+EXPORT_SYMBOL(s3c_device_timer3);
+
+#ifdef CONFIG_CPU_S3C2440
+
+/* Camif Controller */
+
+static struct resource s3c_camif_resource[] = {
+	[0] = {
+		.start = S3C2440_PA_CAMIF,
+		.end   = S3C2440_PA_CAMIF + S3C2440_SZ_CAMIF - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_CAM,
+		.end   = IRQ_CAM,
+		.flags = IORESOURCE_IRQ,
+	}
+
+};
+
+static u64 s3c_device_camif_dmamask = 0xffffffffUL;
+
+struct platform_device s3c_device_camif = {
+	.name		  = "s3c2440-camif",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_camif_resource),
+	.resource	  = s3c_camif_resource,
+	.dev              = {
+		.dma_mask = &s3c_device_camif_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+EXPORT_SYMBOL(s3c_device_camif);
+
+#endif // CONFIG_CPU_S32440
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
new file mode 100644
index 0000000..c784e1f
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -0,0 +1,1441 @@
+/* linux/arch/arm/plat-s3c24xx/dma.c
+ *
+ * Copyright (c) 2003-2005,2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 DMA core
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+
+#ifdef CONFIG_S3C2410_DMA_DEBUG
+#define DEBUG
+#endif
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/sysdev.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+
+#include <asm/mach/dma.h>
+#include <asm/arch/map.h>
+
+#include <asm/plat-s3c24xx/dma.h>
+
+/* io map for dma */
+static void __iomem *dma_base;
+static struct kmem_cache *dma_kmem;
+
+struct s3c24xx_dma_selection dma_sel;
+
+/* dma channel state information */
+struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
+
+/* debugging functions */
+
+#define BUF_MAGIC (0xcafebabe)
+
+#define dmawarn(fmt...) printk(KERN_DEBUG fmt)
+
+#define dma_regaddr(chan, reg) ((chan)->regs + (reg))
+
+#if 1
+#define dma_wrreg(chan, reg, val) writel((val), (chan)->regs + (reg))
+#else
+static inline void
+dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val)
+{
+	pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg);
+	writel(val, dma_regaddr(chan, reg));
+}
+#endif
+
+#define dma_rdreg(chan, reg) readl((chan)->regs + (reg))
+
+/* captured register state for debug */
+
+struct s3c2410_dma_regstate {
+	unsigned long         dcsrc;
+	unsigned long         disrc;
+	unsigned long         dstat;
+	unsigned long         dcon;
+	unsigned long         dmsktrig;
+};
+
+#ifdef CONFIG_S3C2410_DMA_DEBUG
+
+/* dmadbg_showregs
+ *
+ * simple debug routine to print the current state of the dma registers
+*/
+
+static void
+dmadbg_capture(struct s3c2410_dma_chan *chan, struct s3c2410_dma_regstate *regs)
+{
+	regs->dcsrc    = dma_rdreg(chan, S3C2410_DMA_DCSRC);
+	regs->disrc    = dma_rdreg(chan, S3C2410_DMA_DISRC);
+	regs->dstat    = dma_rdreg(chan, S3C2410_DMA_DSTAT);
+	regs->dcon     = dma_rdreg(chan, S3C2410_DMA_DCON);
+	regs->dmsktrig = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
+}
+
+static void
+dmadbg_dumpregs(const char *fname, int line, struct s3c2410_dma_chan *chan,
+		 struct s3c2410_dma_regstate *regs)
+{
+	printk(KERN_DEBUG "dma%d: %s:%d: DCSRC=%08lx, DISRC=%08lx, DSTAT=%08lx DMT=%02lx, DCON=%08lx\n",
+	       chan->number, fname, line,
+	       regs->dcsrc, regs->disrc, regs->dstat, regs->dmsktrig,
+	       regs->dcon);
+}
+
+static void
+dmadbg_showchan(const char *fname, int line, struct s3c2410_dma_chan *chan)
+{
+	struct s3c2410_dma_regstate state;
+
+	dmadbg_capture(chan, &state);
+
+	printk(KERN_DEBUG "dma%d: %s:%d: ls=%d, cur=%p, %p %p\n",
+	       chan->number, fname, line, chan->load_state,
+	       chan->curr, chan->next, chan->end);
+
+	dmadbg_dumpregs(fname, line, chan, &state);
+}
+
+static void
+dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan)
+{
+	struct s3c2410_dma_regstate state;
+
+	dmadbg_capture(chan, &state);
+	dmadbg_dumpregs(fname, line, chan, &state);
+}
+
+#define dbg_showregs(chan) dmadbg_showregs(__FUNCTION__, __LINE__, (chan))
+#define dbg_showchan(chan) dmadbg_showchan(__FUNCTION__, __LINE__, (chan))
+#else
+#define dbg_showregs(chan) do { } while(0)
+#define dbg_showchan(chan) do { } while(0)
+#endif /* CONFIG_S3C2410_DMA_DEBUG */
+
+static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX];
+
+/* lookup_dma_channel
+ *
+ * change the dma channel number given into a real dma channel id
+*/
+
+static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel)
+{
+	if (channel & DMACH_LOW_LEVEL)
+		return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
+	else
+		return dma_chan_map[channel];
+}
+
+/* s3c2410_dma_stats_timeout
+ *
+ * Update DMA stats from timeout info
+*/
+
+static void
+s3c2410_dma_stats_timeout(struct s3c2410_dma_stats *stats, int val)
+{
+	if (stats == NULL)
+		return;
+
+	if (val > stats->timeout_longest)
+		stats->timeout_longest = val;
+	if (val < stats->timeout_shortest)
+		stats->timeout_shortest = val;
+
+	stats->timeout_avg += val;
+}
+
+/* s3c2410_dma_waitforload
+ *
+ * wait for the DMA engine to load a buffer, and update the state accordingly
+*/
+
+static int
+s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line)
+{
+	int timeout = chan->load_timeout;
+	int took;
+
+	if (chan->load_state != S3C2410_DMALOAD_1LOADED) {
+		printk(KERN_ERR "dma%d: s3c2410_dma_waitforload() called in loadstate %d from line %d\n", chan->number, chan->load_state, line);
+		return 0;
+	}
+
+	if (chan->stats != NULL)
+		chan->stats->loads++;
+
+	while (--timeout > 0) {
+		if ((dma_rdreg(chan, S3C2410_DMA_DSTAT) << (32-20)) != 0) {
+			took = chan->load_timeout - timeout;
+
+			s3c2410_dma_stats_timeout(chan->stats, took);
+
+			switch (chan->load_state) {
+			case S3C2410_DMALOAD_1LOADED:
+				chan->load_state = S3C2410_DMALOAD_1RUNNING;
+				break;
+
+			default:
+				printk(KERN_ERR "dma%d: unknown load_state in s3c2410_dma_waitforload() %d\n", chan->number, chan->load_state);
+			}
+
+			return 1;
+		}
+	}
+
+	if (chan->stats != NULL) {
+		chan->stats->timeout_failed++;
+	}
+
+	return 0;
+}
+
+
+
+/* s3c2410_dma_loadbuffer
+ *
+ * load a buffer, and update the channel state
+*/
+
+static inline int
+s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan,
+		       struct s3c2410_dma_buf *buf)
+{
+	unsigned long reload;
+
+	pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n",
+		 buf, (unsigned long)buf->data, buf->size);
+
+	if (buf == NULL) {
+		dmawarn("buffer is NULL\n");
+		return -EINVAL;
+	}
+
+	/* check the state of the channel before we do anything */
+
+	if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
+		dmawarn("load_state is S3C2410_DMALOAD_1LOADED\n");
+	}
+
+	if (chan->load_state == S3C2410_DMALOAD_1LOADED_1RUNNING) {
+		dmawarn("state is S3C2410_DMALOAD_1LOADED_1RUNNING\n");
+	}
+
+	/* it would seem sensible if we are the last buffer to not bother
+	 * with the auto-reload bit, so that the DMA engine will not try
+	 * and load another transfer after this one has finished...
+	 */
+	if (chan->load_state == S3C2410_DMALOAD_NONE) {
+		pr_debug("load_state is none, checking for noreload (next=%p)\n",
+			 buf->next);
+		reload = (buf->next == NULL) ? S3C2410_DCON_NORELOAD : 0;
+	} else {
+		//pr_debug("load_state is %d => autoreload\n", chan->load_state);
+		reload = S3C2410_DCON_AUTORELOAD;
+	}
+
+	if ((buf->data & 0xf0000000) != 0x30000000) {
+		dmawarn("dmaload: buffer is %p\n", (void *)buf->data);
+	}
+
+	writel(buf->data, chan->addr_reg);
+
+	dma_wrreg(chan, S3C2410_DMA_DCON,
+		  chan->dcon | reload | (buf->size/chan->xfer_unit));
+
+	chan->next = buf->next;
+
+	/* update the state of the channel */
+
+	switch (chan->load_state) {
+	case S3C2410_DMALOAD_NONE:
+		chan->load_state = S3C2410_DMALOAD_1LOADED;
+		break;
+
+	case S3C2410_DMALOAD_1RUNNING:
+		chan->load_state = S3C2410_DMALOAD_1LOADED_1RUNNING;
+		break;
+
+	default:
+		dmawarn("dmaload: unknown state %d in loadbuffer\n",
+			chan->load_state);
+		break;
+	}
+
+	return 0;
+}
+
+/* s3c2410_dma_call_op
+ *
+ * small routine to call the op routine with the given op if it has been
+ * registered
+*/
+
+static void
+s3c2410_dma_call_op(struct s3c2410_dma_chan *chan, enum s3c2410_chan_op op)
+{
+	if (chan->op_fn != NULL) {
+		(chan->op_fn)(chan, op);
+	}
+}
+
+/* s3c2410_dma_buffdone
+ *
+ * small wrapper to check if callback routine needs to be called, and
+ * if so, call it
+*/
+
+static inline void
+s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf,
+		     enum s3c2410_dma_buffresult result)
+{
+#if 0
+	pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n",
+		 chan->callback_fn, buf, buf->id, buf->size, result);
+#endif
+
+	if (chan->callback_fn != NULL) {
+		(chan->callback_fn)(chan, buf->id, buf->size, result);
+	}
+}
+
+/* s3c2410_dma_start
+ *
+ * start a dma channel going
+*/
+
+static int s3c2410_dma_start(struct s3c2410_dma_chan *chan)
+{
+	unsigned long tmp;
+	unsigned long flags;
+
+	pr_debug("s3c2410_start_dma: channel=%d\n", chan->number);
+
+	local_irq_save(flags);
+
+	if (chan->state == S3C2410_DMA_RUNNING) {
+		pr_debug("s3c2410_start_dma: already running (%d)\n", chan->state);
+		local_irq_restore(flags);
+		return 0;
+	}
+
+	chan->state = S3C2410_DMA_RUNNING;
+
+	/* check wether there is anything to load, and if not, see
+	 * if we can find anything to load
+	 */
+
+	if (chan->load_state == S3C2410_DMALOAD_NONE) {
+		if (chan->next == NULL) {
+			printk(KERN_ERR "dma%d: channel has nothing loaded\n",
+			       chan->number);
+			chan->state = S3C2410_DMA_IDLE;
+			local_irq_restore(flags);
+			return -EINVAL;
+		}
+
+		s3c2410_dma_loadbuffer(chan, chan->next);
+	}
+
+	dbg_showchan(chan);
+
+	/* enable the channel */
+
+	if (!chan->irq_enabled) {
+		enable_irq(chan->irq);
+		chan->irq_enabled = 1;
+	}
+
+	/* start the channel going */
+
+	tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
+	tmp &= ~S3C2410_DMASKTRIG_STOP;
+	tmp |= S3C2410_DMASKTRIG_ON;
+	dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
+
+	pr_debug("dma%d: %08lx to DMASKTRIG\n", chan->number, tmp);
+
+#if 0
+	/* the dma buffer loads should take care of clearing the AUTO
+	 * reloading feature */
+	tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
+	tmp &= ~S3C2410_DCON_NORELOAD;
+	dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
+#endif
+
+	s3c2410_dma_call_op(chan, S3C2410_DMAOP_START);
+
+	dbg_showchan(chan);
+
+	/* if we've only loaded one buffer onto the channel, then chec
+	 * to see if we have another, and if so, try and load it so when
+	 * the first buffer is finished, the new one will be loaded onto
+	 * the channel */
+
+	if (chan->next != NULL) {
+		if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
+
+			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
+				pr_debug("%s: buff not yet loaded, no more todo\n",
+					 __FUNCTION__);
+			} else {
+				chan->load_state = S3C2410_DMALOAD_1RUNNING;
+				s3c2410_dma_loadbuffer(chan, chan->next);
+			}
+
+		} else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
+			s3c2410_dma_loadbuffer(chan, chan->next);
+		}
+	}
+
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+/* s3c2410_dma_canload
+ *
+ * work out if we can queue another buffer into the DMA engine
+*/
+
+static int
+s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
+{
+	if (chan->load_state == S3C2410_DMALOAD_NONE ||
+	    chan->load_state == S3C2410_DMALOAD_1RUNNING)
+		return 1;
+
+	return 0;
+}
+
+/* s3c2410_dma_enqueue
+ *
+ * queue an given buffer for dma transfer.
+ *
+ * id         the device driver's id information for this buffer
+ * data       the physical address of the buffer data
+ * size       the size of the buffer in bytes
+ *
+ * If the channel is not running, then the flag S3C2410_DMAF_AUTOSTART
+ * is checked, and if set, the channel is started. If this flag isn't set,
+ * then an error will be returned.
+ *
+ * It is possible to queue more than one DMA buffer onto a channel at
+ * once, and the code will deal with the re-loading of the next buffer
+ * when necessary.
+*/
+
+int s3c2410_dma_enqueue(unsigned int channel, void *id,
+			dma_addr_t data, int size)
+{
+	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_buf *buf;
+	unsigned long flags;
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	pr_debug("%s: id=%p, data=%08x, size=%d\n",
+		 __FUNCTION__, id, (unsigned int)data, size);
+
+	buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC);
+	if (buf == NULL) {
+		pr_debug("%s: out of memory (%ld alloc)\n",
+			 __FUNCTION__, (long)sizeof(*buf));
+		return -ENOMEM;
+	}
+
+	//pr_debug("%s: new buffer %p\n", __FUNCTION__, buf);
+	//dbg_showchan(chan);
+
+	buf->next  = NULL;
+	buf->data  = buf->ptr = data;
+	buf->size  = size;
+	buf->id    = id;
+	buf->magic = BUF_MAGIC;
+
+	local_irq_save(flags);
+
+	if (chan->curr == NULL) {
+		/* we've got nothing loaded... */
+		pr_debug("%s: buffer %p queued onto empty channel\n",
+			 __FUNCTION__, buf);
+
+		chan->curr = buf;
+		chan->end  = buf;
+		chan->next = NULL;
+	} else {
+		pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n",
+			 chan->number, __FUNCTION__, buf);
+
+		if (chan->end == NULL)
+			pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n",
+				 chan->number, __FUNCTION__, chan);
+
+		chan->end->next = buf;
+		chan->end = buf;
+	}
+
+	/* if necessary, update the next buffer field */
+	if (chan->next == NULL)
+		chan->next = buf;
+
+	/* check to see if we can load a buffer */
+	if (chan->state == S3C2410_DMA_RUNNING) {
+		if (chan->load_state == S3C2410_DMALOAD_1LOADED && 1) {
+			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
+				printk(KERN_ERR "dma%d: loadbuffer:"
+				       "timeout loading buffer\n",
+				       chan->number);
+				dbg_showchan(chan);
+				local_irq_restore(flags);
+				return -EINVAL;
+			}
+		}
+
+		while (s3c2410_dma_canload(chan) && chan->next != NULL) {
+			s3c2410_dma_loadbuffer(chan, chan->next);
+		}
+	} else if (chan->state == S3C2410_DMA_IDLE) {
+		if (chan->flags & S3C2410_DMAF_AUTOSTART) {
+			s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_START);
+		}
+	}
+
+	local_irq_restore(flags);
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_enqueue);
+
+static inline void
+s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf)
+{
+	int magicok = (buf->magic == BUF_MAGIC);
+
+	buf->magic = -1;
+
+	if (magicok) {
+		kmem_cache_free(dma_kmem, buf);
+	} else {
+		printk("s3c2410_dma_freebuf: buff %p with bad magic\n", buf);
+	}
+}
+
+/* s3c2410_dma_lastxfer
+ *
+ * called when the system is out of buffers, to ensure that the channel
+ * is prepared for shutdown.
+*/
+
+static inline void
+s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan)
+{
+#if 0
+	pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n",
+		 chan->number, chan->load_state);
+#endif
+
+	switch (chan->load_state) {
+	case S3C2410_DMALOAD_NONE:
+		break;
+
+	case S3C2410_DMALOAD_1LOADED:
+		if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
+				/* flag error? */
+			printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
+			       chan->number, __FUNCTION__);
+			return;
+		}
+		break;
+
+	case S3C2410_DMALOAD_1LOADED_1RUNNING:
+		/* I belive in this case we do not have anything to do
+		 * until the next buffer comes along, and we turn off the
+		 * reload */
+		return;
+
+	default:
+		pr_debug("dma%d: lastxfer: unhandled load_state %d with no next\n",
+			 chan->number, chan->load_state);
+		return;
+
+	}
+
+	/* hopefully this'll shut the damned thing up after the transfer... */
+	dma_wrreg(chan, S3C2410_DMA_DCON, chan->dcon | S3C2410_DCON_NORELOAD);
+}
+
+
+#define dmadbg2(x...)
+
+static irqreturn_t
+s3c2410_dma_irq(int irq, void *devpw)
+{
+	struct s3c2410_dma_chan *chan = (struct s3c2410_dma_chan *)devpw;
+	struct s3c2410_dma_buf  *buf;
+
+	buf = chan->curr;
+
+	dbg_showchan(chan);
+
+	/* modify the channel state */
+
+	switch (chan->load_state) {
+	case S3C2410_DMALOAD_1RUNNING:
+		/* TODO - if we are running only one buffer, we probably
+		 * want to reload here, and then worry about the buffer
+		 * callback */
+
+		chan->load_state = S3C2410_DMALOAD_NONE;
+		break;
+
+	case S3C2410_DMALOAD_1LOADED:
+		/* iirc, we should go back to NONE loaded here, we
+		 * had a buffer, and it was never verified as being
+		 * loaded.
+		 */
+
+		chan->load_state = S3C2410_DMALOAD_NONE;
+		break;
+
+	case S3C2410_DMALOAD_1LOADED_1RUNNING:
+		/* we'll worry about checking to see if another buffer is
+		 * ready after we've called back the owner. This should
+		 * ensure we do not wait around too long for the DMA
+		 * engine to start the next transfer
+		 */
+
+		chan->load_state = S3C2410_DMALOAD_1LOADED;
+		break;
+
+	case S3C2410_DMALOAD_NONE:
+		printk(KERN_ERR "dma%d: IRQ with no loaded buffer?\n",
+		       chan->number);
+		break;
+
+	default:
+		printk(KERN_ERR "dma%d: IRQ in invalid load_state %d\n",
+		       chan->number, chan->load_state);
+		break;
+	}
+
+	if (buf != NULL) {
+		/* update the chain to make sure that if we load any more
+		 * buffers when we call the callback function, things should
+		 * work properly */
+
+		chan->curr = buf->next;
+		buf->next  = NULL;
+
+		if (buf->magic != BUF_MAGIC) {
+			printk(KERN_ERR "dma%d: %s: buf %p incorrect magic\n",
+			       chan->number, __FUNCTION__, buf);
+			return IRQ_HANDLED;
+		}
+
+		s3c2410_dma_buffdone(chan, buf, S3C2410_RES_OK);
+
+		/* free resouces */
+		s3c2410_dma_freebuf(buf);
+	} else {
+	}
+
+	/* only reload if the channel is still running... our buffer done
+	 * routine may have altered the state by requesting the dma channel
+	 * to stop or shutdown... */
+
+	/* todo: check that when the channel is shut-down from inside this
+	 * function, we cope with unsetting reload, etc */
+
+	if (chan->next != NULL && chan->state != S3C2410_DMA_IDLE) {
+		unsigned long flags;
+
+		switch (chan->load_state) {
+		case S3C2410_DMALOAD_1RUNNING:
+			/* don't need to do anything for this state */
+			break;
+
+		case S3C2410_DMALOAD_NONE:
+			/* can load buffer immediately */
+			break;
+
+		case S3C2410_DMALOAD_1LOADED:
+			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
+				/* flag error? */
+				printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
+				       chan->number, __FUNCTION__);
+				return IRQ_HANDLED;
+			}
+
+			break;
+
+		case S3C2410_DMALOAD_1LOADED_1RUNNING:
+			goto no_load;
+
+		default:
+			printk(KERN_ERR "dma%d: unknown load_state in irq, %d\n",
+			       chan->number, chan->load_state);
+			return IRQ_HANDLED;
+		}
+
+		local_irq_save(flags);
+		s3c2410_dma_loadbuffer(chan, chan->next);
+		local_irq_restore(flags);
+	} else {
+		s3c2410_dma_lastxfer(chan);
+
+		/* see if we can stop this channel.. */
+		if (chan->load_state == S3C2410_DMALOAD_NONE) {
+			pr_debug("dma%d: end of transfer, stopping channel (%ld)\n",
+				 chan->number, jiffies);
+			s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL,
+					 S3C2410_DMAOP_STOP);
+		}
+	}
+
+ no_load:
+	return IRQ_HANDLED;
+}
+
+static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel);
+
+/* s3c2410_request_dma
+ *
+ * get control of an dma channel
+*/
+
+int s3c2410_dma_request(unsigned int channel,
+			struct s3c2410_dma_client *client,
+			void *dev)
+{
+	struct s3c2410_dma_chan *chan;
+	unsigned long flags;
+	int err;
+
+	pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
+		 channel, client->name, dev);
+
+	local_irq_save(flags);
+
+	chan = s3c2410_dma_map_channel(channel);
+	if (chan == NULL) {
+		local_irq_restore(flags);
+		return -EBUSY;
+	}
+
+	dbg_showchan(chan);
+
+	chan->client = client;
+	chan->in_use = 1;
+
+	if (!chan->irq_claimed) {
+		pr_debug("dma%d: %s : requesting irq %d\n",
+			 channel, __FUNCTION__, chan->irq);
+
+		chan->irq_claimed = 1;
+		local_irq_restore(flags);
+
+		err = request_irq(chan->irq, s3c2410_dma_irq, IRQF_DISABLED,
+				  client->name, (void *)chan);
+
+		local_irq_save(flags);
+
+		if (err) {
+			chan->in_use = 0;
+			chan->irq_claimed = 0;
+			local_irq_restore(flags);
+
+			printk(KERN_ERR "%s: cannot get IRQ %d for DMA %d\n",
+			       client->name, chan->irq, chan->number);
+			return err;
+		}
+
+		chan->irq_enabled = 1;
+	}
+
+	local_irq_restore(flags);
+
+	/* need to setup */
+
+	pr_debug("%s: channel initialised, %p\n", __FUNCTION__, chan);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_request);
+
+/* s3c2410_dma_free
+ *
+ * release the given channel back to the system, will stop and flush
+ * any outstanding transfers, and ensure the channel is ready for the
+ * next claimant.
+ *
+ * Note, although a warning is currently printed if the freeing client
+ * info is not the same as the registrant's client info, the free is still
+ * allowed to go through.
+*/
+
+int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client)
+{
+	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	unsigned long flags;
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	local_irq_save(flags);
+
+	if (chan->client != client) {
+		printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
+		       channel, chan->client, client);
+	}
+
+	/* sort out stopping and freeing the channel */
+
+	if (chan->state != S3C2410_DMA_IDLE) {
+		pr_debug("%s: need to stop dma channel %p\n",
+		       __FUNCTION__, chan);
+
+		/* possibly flush the channel */
+		s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STOP);
+	}
+
+	chan->client = NULL;
+	chan->in_use = 0;
+
+	if (chan->irq_claimed)
+		free_irq(chan->irq, (void *)chan);
+
+	chan->irq_claimed = 0;
+
+	if (!(channel & DMACH_LOW_LEVEL))
+		dma_chan_map[channel] = NULL;
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_free);
+
+static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan)
+{
+	unsigned long flags;
+	unsigned long tmp;
+
+	pr_debug("%s:\n", __FUNCTION__);
+
+	dbg_showchan(chan);
+
+	local_irq_save(flags);
+
+	s3c2410_dma_call_op(chan,  S3C2410_DMAOP_STOP);
+
+	tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
+	tmp |= S3C2410_DMASKTRIG_STOP;
+	//tmp &= ~S3C2410_DMASKTRIG_ON;
+	dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
+
+#if 0
+	/* should also clear interrupts, according to WinCE BSP */
+	tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
+	tmp |= S3C2410_DCON_NORELOAD;
+	dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
+#endif
+
+	/* should stop do this, or should we wait for flush? */
+	chan->state      = S3C2410_DMA_IDLE;
+	chan->load_state = S3C2410_DMALOAD_NONE;
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+void s3c2410_dma_waitforstop(struct s3c2410_dma_chan *chan)
+{
+	unsigned long tmp;
+	unsigned int timeout = 0x10000;
+
+	while (timeout-- > 0) {
+		tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
+
+		if (!(tmp & S3C2410_DMASKTRIG_ON))
+			return;
+	}
+
+	pr_debug("dma%d: failed to stop?\n", chan->number);
+}
+
+
+/* s3c2410_dma_flush
+ *
+ * stop the channel, and remove all current and pending transfers
+*/
+
+static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan)
+{
+	struct s3c2410_dma_buf *buf, *next;
+	unsigned long flags;
+
+	pr_debug("%s: chan %p (%d)\n", __FUNCTION__, chan, chan->number);
+
+	dbg_showchan(chan);
+
+	local_irq_save(flags);
+
+	if (chan->state != S3C2410_DMA_IDLE) {
+		pr_debug("%s: stopping channel...\n", __FUNCTION__ );
+		s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP);
+	}
+
+	buf = chan->curr;
+	if (buf == NULL)
+		buf = chan->next;
+
+	chan->curr = chan->next = chan->end = NULL;
+
+	if (buf != NULL) {
+		for ( ; buf != NULL; buf = next) {
+			next = buf->next;
+
+			pr_debug("%s: free buffer %p, next %p\n",
+			       __FUNCTION__, buf, buf->next);
+
+			s3c2410_dma_buffdone(chan, buf, S3C2410_RES_ABORT);
+			s3c2410_dma_freebuf(buf);
+		}
+	}
+
+	dbg_showregs(chan);
+
+	s3c2410_dma_waitforstop(chan);
+
+#if 0
+	/* should also clear interrupts, according to WinCE BSP */
+	{
+		unsigned long tmp;
+
+		tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
+		tmp |= S3C2410_DCON_NORELOAD;
+		dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
+	}
+#endif
+
+	dbg_showregs(chan);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+int
+s3c2410_dma_started(struct s3c2410_dma_chan *chan)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	dbg_showchan(chan);
+
+	/* if we've only loaded one buffer onto the channel, then chec
+	 * to see if we have another, and if so, try and load it so when
+	 * the first buffer is finished, the new one will be loaded onto
+	 * the channel */
+
+	if (chan->next != NULL) {
+		if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
+
+			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
+				pr_debug("%s: buff not yet loaded, no more todo\n",
+					 __FUNCTION__);
+			} else {
+				chan->load_state = S3C2410_DMALOAD_1RUNNING;
+				s3c2410_dma_loadbuffer(chan, chan->next);
+			}
+
+		} else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
+			s3c2410_dma_loadbuffer(chan, chan->next);
+		}
+	}
+
+
+	local_irq_restore(flags);
+
+	return 0;
+
+}
+
+int
+s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op)
+{
+	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	switch (op) {
+	case S3C2410_DMAOP_START:
+		return s3c2410_dma_start(chan);
+
+	case S3C2410_DMAOP_STOP:
+		return s3c2410_dma_dostop(chan);
+
+	case S3C2410_DMAOP_PAUSE:
+	case S3C2410_DMAOP_RESUME:
+		return -ENOENT;
+
+	case S3C2410_DMAOP_FLUSH:
+		return s3c2410_dma_flush(chan);
+
+	case S3C2410_DMAOP_STARTED:
+		return s3c2410_dma_started(chan);
+
+	case S3C2410_DMAOP_TIMEOUT:
+		return 0;
+
+	}
+
+	return -ENOENT;      /* unknown, don't bother */
+}
+
+EXPORT_SYMBOL(s3c2410_dma_ctrl);
+
+/* DMA configuration for each channel
+ *
+ * DISRCC -> source of the DMA (AHB,APB)
+ * DISRC  -> source address of the DMA
+ * DIDSTC -> destination of the DMA (AHB,APD)
+ * DIDST  -> destination address of the DMA
+*/
+
+/* s3c2410_dma_config
+ *
+ * xfersize:     size of unit in bytes (1,2,4)
+ * dcon:         base value of the DCONx register
+*/
+
+int s3c2410_dma_config(dmach_t channel,
+		       int xferunit,
+		       int dcon)
+{
+	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+
+	pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
+		 __FUNCTION__, channel, xferunit, dcon);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	pr_debug("%s: Initial dcon is %08x\n", __FUNCTION__, dcon);
+
+	dcon |= chan->dcon & dma_sel.dcon_mask;
+
+	pr_debug("%s: New dcon is %08x\n", __FUNCTION__, dcon);
+
+	switch (xferunit) {
+	case 1:
+		dcon |= S3C2410_DCON_BYTE;
+		break;
+
+	case 2:
+		dcon |= S3C2410_DCON_HALFWORD;
+		break;
+
+	case 4:
+		dcon |= S3C2410_DCON_WORD;
+		break;
+
+	default:
+		pr_debug("%s: bad transfer size %d\n", __FUNCTION__, xferunit);
+		return -EINVAL;
+	}
+
+	dcon |= S3C2410_DCON_HWTRIG;
+	dcon |= S3C2410_DCON_INTREQ;
+
+	pr_debug("%s: dcon now %08x\n", __FUNCTION__, dcon);
+
+	chan->dcon = dcon;
+	chan->xfer_unit = xferunit;
+
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_config);
+
+int s3c2410_dma_setflags(dmach_t channel, unsigned int flags)
+{
+	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	pr_debug("%s: chan=%p, flags=%08x\n", __FUNCTION__, chan, flags);
+
+	chan->flags = flags;
+
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_setflags);
+
+
+/* do we need to protect the settings of the fields from
+ * irq?
+*/
+
+int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn)
+{
+	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	pr_debug("%s: chan=%p, op rtn=%p\n", __FUNCTION__, chan, rtn);
+
+	chan->op_fn = rtn;
+
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_set_opfn);
+
+int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn)
+{
+	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	pr_debug("%s: chan=%p, callback rtn=%p\n", __FUNCTION__, chan, rtn);
+
+	chan->callback_fn = rtn;
+
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
+
+/* s3c2410_dma_devconfig
+ *
+ * configure the dma source/destination hardware type and address
+ *
+ * source:    S3C2410_DMASRC_HW: source is hardware
+ *            S3C2410_DMASRC_MEM: source is memory
+ *
+ * hwcfg:     the value for xxxSTCn register,
+ *            bit 0: 0=increment pointer, 1=leave pointer
+ *            bit 1: 0=soucre is AHB, 1=soucre is APB
+ *
+ * devaddr:   physical address of the source
+*/
+
+int s3c2410_dma_devconfig(int channel,
+			  enum s3c2410_dmasrc source,
+			  int hwcfg,
+			  unsigned long devaddr)
+{
+	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n",
+		 __FUNCTION__, (int)source, hwcfg, devaddr);
+
+	chan->source = source;
+	chan->dev_addr = devaddr;
+
+	switch (source) {
+	case S3C2410_DMASRC_HW:
+		/* source is hardware */
+		pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n",
+			 __FUNCTION__, devaddr, hwcfg);
+		dma_wrreg(chan, S3C2410_DMA_DISRCC, hwcfg & 3);
+		dma_wrreg(chan, S3C2410_DMA_DISRC,  devaddr);
+		dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0));
+
+		chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST);
+		return 0;
+
+	case S3C2410_DMASRC_MEM:
+		/* source is memory */
+		pr_debug( "%s: mem source, devaddr=%08lx, hwcfg=%d\n",
+			  __FUNCTION__, devaddr, hwcfg);
+		dma_wrreg(chan, S3C2410_DMA_DISRCC, (0<<1) | (0<<0));
+		dma_wrreg(chan, S3C2410_DMA_DIDST,  devaddr);
+		dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3);
+
+		chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DISRC);
+		return 0;
+	}
+
+	printk(KERN_ERR "dma%d: invalid source type (%d)\n", channel, source);
+	return -EINVAL;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_devconfig);
+
+/* s3c2410_dma_getposition
+ *
+ * returns the current transfer points for the dma source and destination
+*/
+
+int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst)
+{
+ 	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	if (src != NULL)
+ 		*src = dma_rdreg(chan, S3C2410_DMA_DCSRC);
+
+ 	if (dst != NULL)
+ 		*dst = dma_rdreg(chan, S3C2410_DMA_DCDST);
+
+ 	return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_getposition);
+
+
+/* system device class */
+
+#ifdef CONFIG_PM
+
+static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state)
+{
+	struct s3c2410_dma_chan *cp = container_of(dev, struct s3c2410_dma_chan, dev);
+
+	printk(KERN_DEBUG "suspending dma channel %d\n", cp->number);
+
+	if (dma_rdreg(cp, S3C2410_DMA_DMASKTRIG) & S3C2410_DMASKTRIG_ON) {
+		/* the dma channel is still working, which is probably
+		 * a bad thing to do over suspend/resume. We stop the
+		 * channel and assume that the client is either going to
+		 * retry after resume, or that it is broken.
+		 */
+
+		printk(KERN_INFO "dma: stopping channel %d due to suspend\n",
+		       cp->number);
+
+		s3c2410_dma_dostop(cp);
+	}
+
+	return 0;
+}
+
+static int s3c2410_dma_resume(struct sys_device *dev)
+{
+	return 0;
+}
+
+#else
+#define s3c2410_dma_suspend NULL
+#define s3c2410_dma_resume  NULL
+#endif /* CONFIG_PM */
+
+struct sysdev_class dma_sysclass = {
+	set_kset_name("s3c24xx-dma"),
+	.suspend	= s3c2410_dma_suspend,
+	.resume		= s3c2410_dma_resume,
+};
+
+/* kmem cache implementation */
+
+static void s3c2410_dma_cache_ctor(void *p, struct kmem_cache *c, unsigned long f)
+{
+	memset(p, 0, sizeof(struct s3c2410_dma_buf));
+}
+
+/* initialisation code */
+
+static int __init s3c2410_init_dma(void)
+{
+	struct s3c2410_dma_chan *cp;
+	int channel;
+	int ret;
+
+	printk("S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics\n");
+
+	dma_base = ioremap(S3C24XX_PA_DMA, 0x200);
+	if (dma_base == NULL) {
+		printk(KERN_ERR "dma failed to remap register block\n");
+		return -ENOMEM;
+	}
+
+	printk("Registering sysclass\n");
+
+	ret = sysdev_class_register(&dma_sysclass);
+	if (ret != 0) {
+		printk(KERN_ERR "dma sysclass registration failed\n");
+		goto err;
+	}
+
+	dma_kmem = kmem_cache_create("dma_desc", sizeof(struct s3c2410_dma_buf), 0,
+				     SLAB_HWCACHE_ALIGN,
+				     s3c2410_dma_cache_ctor, NULL);
+
+	if (dma_kmem == NULL) {
+		printk(KERN_ERR "dma failed to make kmem cache\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	for (channel = 0; channel < S3C2410_DMA_CHANNELS; channel++) {
+		cp = &s3c2410_chans[channel];
+
+		memset(cp, 0, sizeof(struct s3c2410_dma_chan));
+
+		/* dma channel irqs are in order.. */
+		cp->number = channel;
+		cp->irq    = channel + IRQ_DMA0;
+		cp->regs   = dma_base + (channel*0x40);
+
+		/* point current stats somewhere */
+		cp->stats  = &cp->stats_store;
+		cp->stats_store.timeout_shortest = LONG_MAX;
+
+		/* basic channel configuration */
+
+		cp->load_timeout = 1<<18;
+
+		/* register system device */
+
+		cp->dev.cls = &dma_sysclass;
+		cp->dev.id  = channel;
+		ret = sysdev_register(&cp->dev);
+
+		printk("DMA channel %d at %p, irq %d\n",
+		       cp->number, cp->regs, cp->irq);
+	}
+
+	return 0;
+
+ err:
+	kmem_cache_destroy(dma_kmem);
+	iounmap(dma_base);
+	dma_base = NULL;
+	return ret;
+}
+
+core_initcall(s3c2410_init_dma);
+
+static inline int is_channel_valid(unsigned int channel)
+{
+	return (channel & DMA_CH_VALID);
+}
+
+/* s3c2410_dma_map_channel()
+ *
+ * turn the virtual channel number into a real, and un-used hardware
+ * channel.
+ *
+ * currently this code uses first-free channel from the specified harware
+ * map, not taking into account anything that the board setup code may
+ * have to say about the likely peripheral set to be in use.
+*/
+
+struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
+{
+	struct s3c24xx_dma_map *ch_map;
+	struct s3c2410_dma_chan *dmach;
+	int ch;
+
+	if (dma_sel.map == NULL || channel > dma_sel.map_size)
+		return NULL;
+
+	ch_map = dma_sel.map + channel;
+
+	for (ch = 0; ch < S3C2410_DMA_CHANNELS; ch++) {
+		if (!is_channel_valid(ch_map->channels[ch]))
+			continue;
+
+		if (s3c2410_chans[ch].in_use == 0) {
+			printk("mapped channel %d to %d\n", channel, ch);
+			break;
+		}
+	}
+
+	if (ch >= S3C2410_DMA_CHANNELS)
+		return NULL;
+
+	/* update our channel mapping */
+
+	dmach = &s3c2410_chans[ch];
+	dma_chan_map[channel] = dmach;
+
+	/* select the channel */
+
+	(dma_sel.select)(dmach, ch_map);
+
+	return dmach;
+}
+
+static void s3c24xx_dma_show_ch(struct s3c24xx_dma_map *map, int ch)
+{
+	/* show the channel configuration */
+
+	printk("%2d: %20s, channels %c%c%c%c\n", ch, map->name,
+	       (is_channel_valid(map->channels[0]) ? '0' : '-'),
+	       (is_channel_valid(map->channels[1]) ? '1' : '-'),
+	       (is_channel_valid(map->channels[2]) ? '2' : '-'),
+	       (is_channel_valid(map->channels[3]) ? '3' : '-'));
+}
+
+static int s3c24xx_dma_check_entry(struct s3c24xx_dma_map *map, int ch)
+{
+	if (1)
+		s3c24xx_dma_show_ch(map, ch);
+
+	return 0;
+}
+
+int __init s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel)
+{
+	struct s3c24xx_dma_map *nmap;
+	size_t map_sz = sizeof(*nmap) * sel->map_size;
+	int ptr;
+
+	nmap = kmalloc(map_sz, GFP_KERNEL);
+	if (nmap == NULL)
+		return -ENOMEM;
+
+	memcpy(nmap, sel->map, map_sz);
+	memcpy(&dma_sel, sel, sizeof(*sel));
+
+	dma_sel.map = nmap;
+
+	for (ptr = 0; ptr < sel->map_size; ptr++)
+		s3c24xx_dma_check_entry(nmap+ptr, ptr);
+
+	return 0;
+}
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
new file mode 100644
index 0000000..ec3a09c
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/gpio.c
@@ -0,0 +1,188 @@
+/* linux/arch/arm/plat-s3c24xx/gpio.c
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX GPIO support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-gpio.h>
+
+void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function)
+{
+	void __iomem *base = S3C24XX_GPIO_BASE(pin);
+	unsigned long mask;
+	unsigned long con;
+	unsigned long flags;
+
+	if (pin < S3C2410_GPIO_BANKB) {
+		mask = 1 << S3C2410_GPIO_OFFSET(pin);
+	} else {
+		mask = 3 << S3C2410_GPIO_OFFSET(pin)*2;
+	}
+
+	switch (function) {
+	case S3C2410_GPIO_LEAVE:
+		mask = 0;
+		function = 0;
+		break;
+
+	case S3C2410_GPIO_INPUT:
+	case S3C2410_GPIO_OUTPUT:
+	case S3C2410_GPIO_SFN2:
+	case S3C2410_GPIO_SFN3:
+		if (pin < S3C2410_GPIO_BANKB) {
+			function -= 1;
+			function &= 1;
+			function <<= S3C2410_GPIO_OFFSET(pin);
+		} else {
+			function &= 3;
+			function <<= S3C2410_GPIO_OFFSET(pin)*2;
+		}
+	}
+
+	/* modify the specified register wwith IRQs off */
+
+	local_irq_save(flags);
+
+	con  = __raw_readl(base + 0x00);
+	con &= ~mask;
+	con |= function;
+
+	__raw_writel(con, base + 0x00);
+
+	local_irq_restore(flags);
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_cfgpin);
+
+unsigned int s3c2410_gpio_getcfg(unsigned int pin)
+{
+	void __iomem *base = S3C24XX_GPIO_BASE(pin);
+	unsigned long val = __raw_readl(base);
+
+	if (pin < S3C2410_GPIO_BANKB) {
+		val >>= S3C2410_GPIO_OFFSET(pin);
+		val &= 1;
+		val += 1;
+	} else {
+		val >>= S3C2410_GPIO_OFFSET(pin)*2;
+		val &= 3;
+	}
+
+	return val | S3C2410_GPIO_INPUT;
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_getcfg);
+
+void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
+{
+	void __iomem *base = S3C24XX_GPIO_BASE(pin);
+	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+	unsigned long flags;
+	unsigned long up;
+
+	if (pin < S3C2410_GPIO_BANKB)
+		return;
+
+	local_irq_save(flags);
+
+	up = __raw_readl(base + 0x08);
+	up &= ~(1L << offs);
+	up |= to << offs;
+	__raw_writel(up, base + 0x08);
+
+	local_irq_restore(flags);
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_pullup);
+
+void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
+{
+	void __iomem *base = S3C24XX_GPIO_BASE(pin);
+	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+	unsigned long flags;
+	unsigned long dat;
+
+	local_irq_save(flags);
+
+	dat = __raw_readl(base + 0x04);
+	dat &= ~(1 << offs);
+	dat |= to << offs;
+	__raw_writel(dat, base + 0x04);
+
+	local_irq_restore(flags);
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_setpin);
+
+unsigned int s3c2410_gpio_getpin(unsigned int pin)
+{
+	void __iomem *base = S3C24XX_GPIO_BASE(pin);
+	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+
+	return __raw_readl(base + 0x04) & (1<< offs);
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_getpin);
+
+unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
+{
+	unsigned long flags;
+	unsigned long misccr;
+
+	local_irq_save(flags);
+	misccr = __raw_readl(S3C24XX_MISCCR);
+	misccr &= ~clear;
+	misccr ^= change;
+	__raw_writel(misccr, S3C24XX_MISCCR);
+	local_irq_restore(flags);
+
+	return misccr;
+}
+
+EXPORT_SYMBOL(s3c2410_modify_misccr);
+
+int s3c2410_gpio_getirq(unsigned int pin)
+{
+	if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15)
+		return -1;	/* not valid interrupts */
+
+	if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7)
+		return -1;	/* not valid pin */
+
+	if (pin < S3C2410_GPF4)
+		return (pin - S3C2410_GPF0) + IRQ_EINT0;
+
+	if (pin < S3C2410_GPG0)
+		return (pin - S3C2410_GPF4) + IRQ_EINT4;
+
+	return (pin - S3C2410_GPG0) + IRQ_EINT8;
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_getirq);
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
new file mode 100644
index 0000000..ce18639
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -0,0 +1,801 @@
+/* linux/arch/arm/plat-s3c24xx/irq.c
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * Changelog:
+ *
+ *   22-Jul-2004  Ben Dooks <ben@simtec.co.uk>
+ *                Fixed compile warnings
+ *
+ *   22-Jul-2004  Roc Wu <cooloney@yahoo.com.cn>
+ *                Fixed s3c_extirq_type
+ *
+ *   21-Jul-2004  Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
+ *                Addition of ADC/TC demux
+ *
+ *   04-Oct-2004  Klaus Fetscher <k.fetscher@fetron.de>
+ *		  Fix for set_irq_type() on low EINT numbers
+ *
+ *   05-Oct-2004  Ben Dooks <ben@simtec.co.uk>
+ *		  Tidy up KF's patch and sort out new release
+ *
+ *   05-Oct-2004  Ben Dooks <ben@simtec.co.uk>
+ *		  Add support for power management controls
+ *
+ *   04-Nov-2004  Ben Dooks
+ *		  Fix standard IRQ wake for EINT0..4 and RTC
+ *
+ *   22-Feb-2005  Ben Dooks
+ *		  Fixed edge-triggering on ADC IRQ
+ *
+ *   28-Jun-2005  Ben Dooks
+ *		  Mark IRQ_LCD valid
+ *
+ *   25-Jul-2005  Ben Dooks
+ *		  Split the S3C2440 IRQ code to seperate file
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/mach/irq.h>
+
+#include <asm/arch/regs-irq.h>
+#include <asm/arch/regs-gpio.h>
+
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
+#include <asm/plat-s3c24xx/irq.h>
+
+/* wakeup irq control */
+
+#ifdef CONFIG_PM
+
+/* state for IRQs over sleep */
+
+/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
+ *
+ * set bit to 1 in allow bitfield to enable the wakeup settings on it
+*/
+
+unsigned long s3c_irqwake_intallow	= 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL;
+unsigned long s3c_irqwake_intmask	= 0xffffffffL;
+unsigned long s3c_irqwake_eintallow	= 0x0000fff0L;
+unsigned long s3c_irqwake_eintmask	= 0xffffffffL;
+
+int
+s3c_irq_wake(unsigned int irqno, unsigned int state)
+{
+	unsigned long irqbit = 1 << (irqno - IRQ_EINT0);
+
+	if (!(s3c_irqwake_intallow & irqbit))
+		return -ENOENT;
+
+	printk(KERN_INFO "wake %s for irq %d\n",
+	       state ? "enabled" : "disabled", irqno);
+
+	if (!state)
+		s3c_irqwake_intmask |= irqbit;
+	else
+		s3c_irqwake_intmask &= ~irqbit;
+
+	return 0;
+}
+
+static int
+s3c_irqext_wake(unsigned int irqno, unsigned int state)
+{
+	unsigned long bit = 1L << (irqno - EXTINT_OFF);
+
+	if (!(s3c_irqwake_eintallow & bit))
+		return -ENOENT;
+
+	printk(KERN_INFO "wake %s for irq %d\n",
+	       state ? "enabled" : "disabled", irqno);
+
+	if (!state)
+		s3c_irqwake_eintmask |= bit;
+	else
+		s3c_irqwake_eintmask &= ~bit;
+
+	return 0;
+}
+
+#else
+#define s3c_irqext_wake NULL
+#define s3c_irq_wake NULL
+#endif
+
+
+static void
+s3c_irq_mask(unsigned int irqno)
+{
+	unsigned long mask;
+
+	irqno -= IRQ_EINT0;
+
+	mask = __raw_readl(S3C2410_INTMSK);
+	mask |= 1UL << irqno;
+	__raw_writel(mask, S3C2410_INTMSK);
+}
+
+static inline void
+s3c_irq_ack(unsigned int irqno)
+{
+	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+
+	__raw_writel(bitval, S3C2410_SRCPND);
+	__raw_writel(bitval, S3C2410_INTPND);
+}
+
+static inline void
+s3c_irq_maskack(unsigned int irqno)
+{
+	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+	unsigned long mask;
+
+	mask = __raw_readl(S3C2410_INTMSK);
+	__raw_writel(mask|bitval, S3C2410_INTMSK);
+
+	__raw_writel(bitval, S3C2410_SRCPND);
+	__raw_writel(bitval, S3C2410_INTPND);
+}
+
+
+static void
+s3c_irq_unmask(unsigned int irqno)
+{
+	unsigned long mask;
+
+	if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23)
+		irqdbf2("s3c_irq_unmask %d\n", irqno);
+
+	irqno -= IRQ_EINT0;
+
+	mask = __raw_readl(S3C2410_INTMSK);
+	mask &= ~(1UL << irqno);
+	__raw_writel(mask, S3C2410_INTMSK);
+}
+
+struct irq_chip s3c_irq_level_chip = {
+	.name		= "s3c-level",
+	.ack		= s3c_irq_maskack,
+	.mask		= s3c_irq_mask,
+	.unmask		= s3c_irq_unmask,
+	.set_wake	= s3c_irq_wake
+};
+
+static struct irq_chip s3c_irq_chip = {
+	.name		= "s3c",
+	.ack		= s3c_irq_ack,
+	.mask		= s3c_irq_mask,
+	.unmask		= s3c_irq_unmask,
+	.set_wake	= s3c_irq_wake
+};
+
+static void
+s3c_irqext_mask(unsigned int irqno)
+{
+	unsigned long mask;
+
+	irqno -= EXTINT_OFF;
+
+	mask = __raw_readl(S3C24XX_EINTMASK);
+	mask |= ( 1UL << irqno);
+	__raw_writel(mask, S3C24XX_EINTMASK);
+}
+
+static void
+s3c_irqext_ack(unsigned int irqno)
+{
+	unsigned long req;
+	unsigned long bit;
+	unsigned long mask;
+
+	bit = 1UL << (irqno - EXTINT_OFF);
+
+	mask = __raw_readl(S3C24XX_EINTMASK);
+
+	__raw_writel(bit, S3C24XX_EINTPEND);
+
+	req = __raw_readl(S3C24XX_EINTPEND);
+	req &= ~mask;
+
+	/* not sure if we should be acking the parent irq... */
+
+	if (irqno <= IRQ_EINT7 ) {
+		if ((req & 0xf0) == 0)
+			s3c_irq_ack(IRQ_EINT4t7);
+	} else {
+		if ((req >> 8) == 0)
+			s3c_irq_ack(IRQ_EINT8t23);
+	}
+}
+
+static void
+s3c_irqext_unmask(unsigned int irqno)
+{
+	unsigned long mask;
+
+	irqno -= EXTINT_OFF;
+
+	mask = __raw_readl(S3C24XX_EINTMASK);
+	mask &= ~( 1UL << irqno);
+	__raw_writel(mask, S3C24XX_EINTMASK);
+}
+
+int
+s3c_irqext_type(unsigned int irq, unsigned int type)
+{
+	void __iomem *extint_reg;
+	void __iomem *gpcon_reg;
+	unsigned long gpcon_offset, extint_offset;
+	unsigned long newvalue = 0, value;
+
+	if ((irq >= IRQ_EINT0) && (irq <= IRQ_EINT3))
+	{
+		gpcon_reg = S3C2410_GPFCON;
+		extint_reg = S3C24XX_EXTINT0;
+		gpcon_offset = (irq - IRQ_EINT0) * 2;
+		extint_offset = (irq - IRQ_EINT0) * 4;
+	}
+	else if ((irq >= IRQ_EINT4) && (irq <= IRQ_EINT7))
+	{
+		gpcon_reg = S3C2410_GPFCON;
+		extint_reg = S3C24XX_EXTINT0;
+		gpcon_offset = (irq - (EXTINT_OFF)) * 2;
+		extint_offset = (irq - (EXTINT_OFF)) * 4;
+	}
+	else if ((irq >= IRQ_EINT8) && (irq <= IRQ_EINT15))
+	{
+		gpcon_reg = S3C2410_GPGCON;
+		extint_reg = S3C24XX_EXTINT1;
+		gpcon_offset = (irq - IRQ_EINT8) * 2;
+		extint_offset = (irq - IRQ_EINT8) * 4;
+	}
+	else if ((irq >= IRQ_EINT16) && (irq <= IRQ_EINT23))
+	{
+		gpcon_reg = S3C2410_GPGCON;
+		extint_reg = S3C24XX_EXTINT2;
+		gpcon_offset = (irq - IRQ_EINT8) * 2;
+		extint_offset = (irq - IRQ_EINT16) * 4;
+	} else
+		return -1;
+
+	/* Set the GPIO to external interrupt mode */
+	value = __raw_readl(gpcon_reg);
+	value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
+	__raw_writel(value, gpcon_reg);
+
+	/* Set the external interrupt to pointed trigger type */
+	switch (type)
+	{
+		case IRQT_NOEDGE:
+			printk(KERN_WARNING "No edge setting!\n");
+			break;
+
+		case IRQT_RISING:
+			newvalue = S3C2410_EXTINT_RISEEDGE;
+			break;
+
+		case IRQT_FALLING:
+			newvalue = S3C2410_EXTINT_FALLEDGE;
+			break;
+
+		case IRQT_BOTHEDGE:
+			newvalue = S3C2410_EXTINT_BOTHEDGE;
+			break;
+
+		case IRQT_LOW:
+			newvalue = S3C2410_EXTINT_LOWLEV;
+			break;
+
+		case IRQT_HIGH:
+			newvalue = S3C2410_EXTINT_HILEV;
+			break;
+
+		default:
+			printk(KERN_ERR "No such irq type %d", type);
+			return -1;
+	}
+
+	value = __raw_readl(extint_reg);
+	value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
+	__raw_writel(value, extint_reg);
+
+	return 0;
+}
+
+static struct irq_chip s3c_irqext_chip = {
+	.name		= "s3c-ext",
+	.mask		= s3c_irqext_mask,
+	.unmask		= s3c_irqext_unmask,
+	.ack		= s3c_irqext_ack,
+	.set_type	= s3c_irqext_type,
+	.set_wake	= s3c_irqext_wake
+};
+
+static struct irq_chip s3c_irq_eint0t4 = {
+	.name		= "s3c-ext0",
+	.ack		= s3c_irq_ack,
+	.mask		= s3c_irq_mask,
+	.unmask		= s3c_irq_unmask,
+	.set_wake	= s3c_irq_wake,
+	.set_type	= s3c_irqext_type,
+};
+
+/* mask values for the parent registers for each of the interrupt types */
+
+#define INTMSK_UART0	 (1UL << (IRQ_UART0 - IRQ_EINT0))
+#define INTMSK_UART1	 (1UL << (IRQ_UART1 - IRQ_EINT0))
+#define INTMSK_UART2	 (1UL << (IRQ_UART2 - IRQ_EINT0))
+#define INTMSK_ADCPARENT (1UL << (IRQ_ADCPARENT - IRQ_EINT0))
+
+
+/* UART0 */
+
+static void
+s3c_irq_uart0_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_UART0, 7);
+}
+
+static void
+s3c_irq_uart0_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_UART0);
+}
+
+static void
+s3c_irq_uart0_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_UART0, 7);
+}
+
+static struct irq_chip s3c_irq_uart0 = {
+	.name		= "s3c-uart0",
+	.mask		= s3c_irq_uart0_mask,
+	.unmask		= s3c_irq_uart0_unmask,
+	.ack		= s3c_irq_uart0_ack,
+};
+
+/* UART1 */
+
+static void
+s3c_irq_uart1_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_UART1, 7 << 3);
+}
+
+static void
+s3c_irq_uart1_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_UART1);
+}
+
+static void
+s3c_irq_uart1_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_UART1, 7 << 3);
+}
+
+static struct irq_chip s3c_irq_uart1 = {
+	.name		= "s3c-uart1",
+	.mask		= s3c_irq_uart1_mask,
+	.unmask		= s3c_irq_uart1_unmask,
+	.ack		= s3c_irq_uart1_ack,
+};
+
+/* UART2 */
+
+static void
+s3c_irq_uart2_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_UART2, 7 << 6);
+}
+
+static void
+s3c_irq_uart2_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_UART2);
+}
+
+static void
+s3c_irq_uart2_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_UART2, 7 << 6);
+}
+
+static struct irq_chip s3c_irq_uart2 = {
+	.name		= "s3c-uart2",
+	.mask		= s3c_irq_uart2_mask,
+	.unmask		= s3c_irq_uart2_unmask,
+	.ack		= s3c_irq_uart2_ack,
+};
+
+/* ADC and Touchscreen */
+
+static void
+s3c_irq_adc_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_ADCPARENT, 3 << 9);
+}
+
+static void
+s3c_irq_adc_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_ADCPARENT);
+}
+
+static void
+s3c_irq_adc_ack(unsigned int irqno)
+{
+	s3c_irqsub_ack(irqno, INTMSK_ADCPARENT, 3 << 9);
+}
+
+static struct irq_chip s3c_irq_adc = {
+	.name		= "s3c-adc",
+	.mask		= s3c_irq_adc_mask,
+	.unmask		= s3c_irq_adc_unmask,
+	.ack		= s3c_irq_adc_ack,
+};
+
+/* irq demux for adc */
+static void s3c_irq_demux_adc(unsigned int irq,
+			      struct irq_desc *desc)
+{
+	unsigned int subsrc, submsk;
+	unsigned int offset = 9;
+	struct irq_desc *mydesc;
+
+	/* read the current pending interrupts, and the mask
+	 * for what it is available */
+
+	subsrc = __raw_readl(S3C2410_SUBSRCPND);
+	submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+	subsrc &= ~submsk;
+	subsrc >>= offset;
+	subsrc &= 3;
+
+	if (subsrc != 0) {
+		if (subsrc & 1) {
+			mydesc = irq_desc + IRQ_TC;
+			desc_handle_irq(IRQ_TC, mydesc);
+		}
+		if (subsrc & 2) {
+			mydesc = irq_desc + IRQ_ADC;
+			desc_handle_irq(IRQ_ADC, mydesc);
+		}
+	}
+}
+
+static void s3c_irq_demux_uart(unsigned int start)
+{
+	unsigned int subsrc, submsk;
+	unsigned int offset = start - IRQ_S3CUART_RX0;
+	struct irq_desc *desc;
+
+	/* read the current pending interrupts, and the mask
+	 * for what it is available */
+
+	subsrc = __raw_readl(S3C2410_SUBSRCPND);
+	submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+	irqdbf2("s3c_irq_demux_uart: start=%d (%d), subsrc=0x%08x,0x%08x\n",
+		start, offset, subsrc, submsk);
+
+	subsrc &= ~submsk;
+	subsrc >>= offset;
+	subsrc &= 7;
+
+	if (subsrc != 0) {
+		desc = irq_desc + start;
+
+		if (subsrc & 1)
+			desc_handle_irq(start, desc);
+
+		desc++;
+
+		if (subsrc & 2)
+			desc_handle_irq(start+1, desc);
+
+		desc++;
+
+		if (subsrc & 4)
+			desc_handle_irq(start+2, desc);
+	}
+}
+
+/* uart demux entry points */
+
+static void
+s3c_irq_demux_uart0(unsigned int irq,
+		    struct irq_desc *desc)
+{
+	irq = irq;
+	s3c_irq_demux_uart(IRQ_S3CUART_RX0);
+}
+
+static void
+s3c_irq_demux_uart1(unsigned int irq,
+		    struct irq_desc *desc)
+{
+	irq = irq;
+	s3c_irq_demux_uart(IRQ_S3CUART_RX1);
+}
+
+static void
+s3c_irq_demux_uart2(unsigned int irq,
+		    struct irq_desc *desc)
+{
+	irq = irq;
+	s3c_irq_demux_uart(IRQ_S3CUART_RX2);
+}
+
+static void
+s3c_irq_demux_extint8(unsigned int irq,
+		      struct irq_desc *desc)
+{
+	unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
+	unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
+
+	eintpnd &= ~eintmsk;
+	eintpnd &= ~0xff;	/* ignore lower irqs */
+
+	/* we may as well handle all the pending IRQs here */
+
+	while (eintpnd) {
+		irq = __ffs(eintpnd);
+		eintpnd &= ~(1<<irq);
+
+		irq += (IRQ_EINT4 - 4);
+		desc_handle_irq(irq, irq_desc + irq);
+	}
+
+}
+
+static void
+s3c_irq_demux_extint4t7(unsigned int irq,
+			struct irq_desc *desc)
+{
+	unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
+	unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
+
+	eintpnd &= ~eintmsk;
+	eintpnd &= 0xff;	/* only lower irqs */
+
+	/* we may as well handle all the pending IRQs here */
+
+	while (eintpnd) {
+		irq = __ffs(eintpnd);
+		eintpnd &= ~(1<<irq);
+
+		irq += (IRQ_EINT4 - 4);
+
+		desc_handle_irq(irq, irq_desc + irq);
+	}
+}
+
+#ifdef CONFIG_PM
+
+static struct sleep_save irq_save[] = {
+	SAVE_ITEM(S3C2410_INTMSK),
+	SAVE_ITEM(S3C2410_INTSUBMSK),
+};
+
+/* the extint values move between the s3c2410/s3c2440 and the s3c2412
+ * so we use an array to hold them, and to calculate the address of
+ * the register at run-time
+*/
+
+static unsigned long save_extint[3];
+static unsigned long save_eintflt[4];
+static unsigned long save_eintmask;
+
+int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(save_extint); i++)
+		save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4));
+
+	for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
+		save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4));
+
+	s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+	save_eintmask = __raw_readl(S3C24XX_EINTMASK);
+
+	return 0;
+}
+
+int s3c24xx_irq_resume(struct sys_device *dev)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(save_extint); i++)
+		__raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4));
+
+	for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
+		__raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4));
+
+	s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+	__raw_writel(save_eintmask, S3C24XX_EINTMASK);
+
+	return 0;
+}
+
+#else
+#define s3c24xx_irq_suspend NULL
+#define s3c24xx_irq_resume  NULL
+#endif
+
+/* s3c24xx_init_irq
+ *
+ * Initialise S3C2410 IRQ system
+*/
+
+void __init s3c24xx_init_irq(void)
+{
+	unsigned long pend;
+	unsigned long last;
+	int irqno;
+	int i;
+
+	irqdbf("s3c2410_init_irq: clearing interrupt status flags\n");
+
+	/* first, clear all interrupts pending... */
+
+	last = 0;
+	for (i = 0; i < 4; i++) {
+		pend = __raw_readl(S3C24XX_EINTPEND);
+
+		if (pend == 0 || pend == last)
+			break;
+
+		__raw_writel(pend, S3C24XX_EINTPEND);
+		printk("irq: clearing pending ext status %08x\n", (int)pend);
+		last = pend;
+	}
+
+	last = 0;
+	for (i = 0; i < 4; i++) {
+		pend = __raw_readl(S3C2410_INTPND);
+
+		if (pend == 0 || pend == last)
+			break;
+
+		__raw_writel(pend, S3C2410_SRCPND);
+		__raw_writel(pend, S3C2410_INTPND);
+		printk("irq: clearing pending status %08x\n", (int)pend);
+		last = pend;
+	}
+
+	last = 0;
+	for (i = 0; i < 4; i++) {
+		pend = __raw_readl(S3C2410_SUBSRCPND);
+
+		if (pend == 0 || pend == last)
+			break;
+
+		printk("irq: clearing subpending status %08x\n", (int)pend);
+		__raw_writel(pend, S3C2410_SUBSRCPND);
+		last = pend;
+	}
+
+	/* register the main interrupts */
+
+	irqdbf("s3c2410_init_irq: registering s3c2410 interrupt handlers\n");
+
+	for (irqno = IRQ_EINT4t7; irqno <= IRQ_ADCPARENT; irqno++) {
+		/* set all the s3c2410 internal irqs */
+
+		switch (irqno) {
+			/* deal with the special IRQs (cascaded) */
+
+		case IRQ_EINT4t7:
+		case IRQ_EINT8t23:
+		case IRQ_UART0:
+		case IRQ_UART1:
+		case IRQ_UART2:
+		case IRQ_ADCPARENT:
+			set_irq_chip(irqno, &s3c_irq_level_chip);
+			set_irq_handler(irqno, handle_level_irq);
+			break;
+
+		case IRQ_RESERVED6:
+		case IRQ_RESERVED24:
+			/* no IRQ here */
+			break;
+
+		default:
+			//irqdbf("registering irq %d (s3c irq)\n", irqno);
+			set_irq_chip(irqno, &s3c_irq_chip);
+			set_irq_handler(irqno, handle_edge_irq);
+			set_irq_flags(irqno, IRQF_VALID);
+		}
+	}
+
+	/* setup the cascade irq handlers */
+
+	set_irq_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint4t7);
+	set_irq_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint8);
+
+	set_irq_chained_handler(IRQ_UART0, s3c_irq_demux_uart0);
+	set_irq_chained_handler(IRQ_UART1, s3c_irq_demux_uart1);
+	set_irq_chained_handler(IRQ_UART2, s3c_irq_demux_uart2);
+	set_irq_chained_handler(IRQ_ADCPARENT, s3c_irq_demux_adc);
+
+	/* external interrupts */
+
+	for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
+		irqdbf("registering irq %d (ext int)\n", irqno);
+		set_irq_chip(irqno, &s3c_irq_eint0t4);
+		set_irq_handler(irqno, handle_edge_irq);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+
+	for (irqno = IRQ_EINT4; irqno <= IRQ_EINT23; irqno++) {
+		irqdbf("registering irq %d (extended s3c irq)\n", irqno);
+		set_irq_chip(irqno, &s3c_irqext_chip);
+		set_irq_handler(irqno, handle_edge_irq);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+
+	/* register the uart interrupts */
+
+	irqdbf("s3c2410: registering external interrupts\n");
+
+	for (irqno = IRQ_S3CUART_RX0; irqno <= IRQ_S3CUART_ERR0; irqno++) {
+		irqdbf("registering irq %d (s3c uart0 irq)\n", irqno);
+		set_irq_chip(irqno, &s3c_irq_uart0);
+		set_irq_handler(irqno, handle_level_irq);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+
+	for (irqno = IRQ_S3CUART_RX1; irqno <= IRQ_S3CUART_ERR1; irqno++) {
+		irqdbf("registering irq %d (s3c uart1 irq)\n", irqno);
+		set_irq_chip(irqno, &s3c_irq_uart1);
+		set_irq_handler(irqno, handle_level_irq);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+
+	for (irqno = IRQ_S3CUART_RX2; irqno <= IRQ_S3CUART_ERR2; irqno++) {
+		irqdbf("registering irq %d (s3c uart2 irq)\n", irqno);
+		set_irq_chip(irqno, &s3c_irq_uart2);
+		set_irq_handler(irqno, handle_level_irq);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+
+	for (irqno = IRQ_TC; irqno <= IRQ_ADC; irqno++) {
+		irqdbf("registering irq %d (s3c adc irq)\n", irqno);
+		set_irq_chip(irqno, &s3c_irq_adc);
+		set_irq_handler(irqno, handle_edge_irq);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+
+	irqdbf("s3c2410: registered interrupt handlers\n");
+}
diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c
new file mode 100644
index 0000000..bd965f2
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/pm-simtec.c
@@ -0,0 +1,66 @@
+/* linux/arch/arm/plat-s3c24xx/pm-simtec.c
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * Power Management helpers for Simtec S3C24XX implementations
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+#include <asm/arch/map.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-mem.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/plat-s3c24xx/pm.h>
+
+#define COPYRIGHT ", (c) 2005 Simtec Electronics"
+
+/* pm_simtec_init
+ *
+ * enable the power management functions
+*/
+
+static __init int pm_simtec_init(void)
+{
+	unsigned long gstatus4;
+
+	/* check which machine we are running on */
+
+	if (!machine_is_bast() && !machine_is_vr1000() &&
+	    !machine_is_anubis() && !machine_is_osiris() &&
+	    !machine_is_aml_m5900())
+		return 0;
+
+	printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n");
+
+	gstatus4  = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30;
+	gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28;
+	gstatus4 |= (__raw_readl(S3C2410_BANKSIZE) & S3C2410_BANKSIZE_MASK);
+
+	__raw_writel(gstatus4, S3C2410_GSTATUS4);
+
+	return s3c2410_pm_init();
+}
+
+arch_initcall(pm_simtec_init);
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
new file mode 100644
index 0000000..ecf68d6
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -0,0 +1,659 @@
+/* linux/arch/arm/plat-s3c24xx/pm.c
+ *
+ * Copyright (c) 2004,2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX Power Manager (Suspend-To-RAM) support
+ *
+ * See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * Parts based on arch/arm/mach-pxa/pm.c
+ *
+ * Thanks to Dimitry Andric for debugging
+*/
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <linux/crc32.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/serial_core.h>
+
+#include <asm/cacheflush.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-clock.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-irq.h>
+
+#include <asm/mach/time.h>
+
+#include <asm/plat-s3c24xx/pm.h>
+
+/* for external use */
+
+unsigned long s3c_pm_flags;
+
+#define PFX "s3c24xx-pm: "
+
+static struct sleep_save core_save[] = {
+	SAVE_ITEM(S3C2410_LOCKTIME),
+	SAVE_ITEM(S3C2410_CLKCON),
+
+	/* we restore the timings here, with the proviso that the board
+	 * brings the system up in an slower, or equal frequency setting
+	 * to the original system.
+	 *
+	 * if we cannot guarantee this, then things are going to go very
+	 * wrong here, as we modify the refresh and both pll settings.
+	 */
+
+	SAVE_ITEM(S3C2410_BWSCON),
+	SAVE_ITEM(S3C2410_BANKCON0),
+	SAVE_ITEM(S3C2410_BANKCON1),
+	SAVE_ITEM(S3C2410_BANKCON2),
+	SAVE_ITEM(S3C2410_BANKCON3),
+	SAVE_ITEM(S3C2410_BANKCON4),
+	SAVE_ITEM(S3C2410_BANKCON5),
+
+	SAVE_ITEM(S3C2410_CLKDIVN),
+	SAVE_ITEM(S3C2410_MPLLCON),
+	SAVE_ITEM(S3C2410_UPLLCON),
+	SAVE_ITEM(S3C2410_CLKSLOW),
+	SAVE_ITEM(S3C2410_REFRESH),
+};
+
+static struct sleep_save gpio_save[] = {
+	SAVE_ITEM(S3C2410_GPACON),
+	SAVE_ITEM(S3C2410_GPADAT),
+
+	SAVE_ITEM(S3C2410_GPBCON),
+	SAVE_ITEM(S3C2410_GPBDAT),
+	SAVE_ITEM(S3C2410_GPBUP),
+
+	SAVE_ITEM(S3C2410_GPCCON),
+	SAVE_ITEM(S3C2410_GPCDAT),
+	SAVE_ITEM(S3C2410_GPCUP),
+
+	SAVE_ITEM(S3C2410_GPDCON),
+	SAVE_ITEM(S3C2410_GPDDAT),
+	SAVE_ITEM(S3C2410_GPDUP),
+
+	SAVE_ITEM(S3C2410_GPECON),
+	SAVE_ITEM(S3C2410_GPEDAT),
+	SAVE_ITEM(S3C2410_GPEUP),
+
+	SAVE_ITEM(S3C2410_GPFCON),
+	SAVE_ITEM(S3C2410_GPFDAT),
+	SAVE_ITEM(S3C2410_GPFUP),
+
+	SAVE_ITEM(S3C2410_GPGCON),
+	SAVE_ITEM(S3C2410_GPGDAT),
+	SAVE_ITEM(S3C2410_GPGUP),
+
+	SAVE_ITEM(S3C2410_GPHCON),
+	SAVE_ITEM(S3C2410_GPHDAT),
+	SAVE_ITEM(S3C2410_GPHUP),
+
+	SAVE_ITEM(S3C2410_DCLKCON),
+};
+
+#ifdef CONFIG_S3C2410_PM_DEBUG
+
+#define SAVE_UART(va) \
+	SAVE_ITEM((va) + S3C2410_ULCON), \
+	SAVE_ITEM((va) + S3C2410_UCON), \
+	SAVE_ITEM((va) + S3C2410_UFCON), \
+	SAVE_ITEM((va) + S3C2410_UMCON), \
+	SAVE_ITEM((va) + S3C2410_UBRDIV)
+
+static struct sleep_save uart_save[] = {
+	SAVE_UART(S3C24XX_VA_UART0),
+	SAVE_UART(S3C24XX_VA_UART1),
+#ifndef CONFIG_CPU_S3C2400
+	SAVE_UART(S3C24XX_VA_UART2),
+#endif
+};
+
+/* debug
+ *
+ * we send the debug to printascii() to allow it to be seen if the
+ * system never wakes up from the sleep
+*/
+
+extern void printascii(const char *);
+
+void pm_dbg(const char *fmt, ...)
+{
+	va_list va;
+	char buff[256];
+
+	va_start(va, fmt);
+	vsprintf(buff, fmt, va);
+	va_end(va);
+
+	printascii(buff);
+}
+
+static void s3c2410_pm_debug_init(void)
+{
+	unsigned long tmp = __raw_readl(S3C2410_CLKCON);
+
+	/* re-start uart clocks */
+	tmp |= S3C2410_CLKCON_UART0;
+	tmp |= S3C2410_CLKCON_UART1;
+	tmp |= S3C2410_CLKCON_UART2;
+
+	__raw_writel(tmp, S3C2410_CLKCON);
+	udelay(10);
+}
+
+#define DBG(fmt...) pm_dbg(fmt)
+#else
+#define DBG(fmt...) printk(KERN_DEBUG fmt)
+
+#define s3c2410_pm_debug_init() do { } while(0)
+
+static struct sleep_save uart_save[] = {};
+#endif
+
+#if defined(CONFIG_S3C2410_PM_CHECK) && CONFIG_S3C2410_PM_CHECK_CHUNKSIZE != 0
+
+/* suspend checking code...
+ *
+ * this next area does a set of crc checks over all the installed
+ * memory, so the system can verify if the resume was ok.
+ *
+ * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
+ * increasing it will mean that the area corrupted will be less easy to spot,
+ * and reducing the size will cause the CRC save area to grow
+*/
+
+#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024)
+
+static u32 crc_size;	/* size needed for the crc block */
+static u32 *crcs;	/* allocated over suspend/resume */
+
+typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg);
+
+/* s3c2410_pm_run_res
+ *
+ * go thorugh the given resource list, and look for system ram
+*/
+
+static void s3c2410_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
+{
+	while (ptr != NULL) {
+		if (ptr->child != NULL)
+			s3c2410_pm_run_res(ptr->child, fn, arg);
+
+		if ((ptr->flags & IORESOURCE_MEM) &&
+		    strcmp(ptr->name, "System RAM") == 0) {
+			DBG("Found system RAM at %08lx..%08lx\n",
+			    ptr->start, ptr->end);
+			arg = (fn)(ptr, arg);
+		}
+
+		ptr = ptr->sibling;
+	}
+}
+
+static void s3c2410_pm_run_sysram(run_fn_t fn, u32 *arg)
+{
+	s3c2410_pm_run_res(&iomem_resource, fn, arg);
+}
+
+static u32 *s3c2410_pm_countram(struct resource *res, u32 *val)
+{
+	u32 size = (u32)(res->end - res->start)+1;
+
+	size += CHECK_CHUNKSIZE-1;
+	size /= CHECK_CHUNKSIZE;
+
+	DBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size);
+
+	*val += size * sizeof(u32);
+	return val;
+}
+
+/* s3c2410_pm_prepare_check
+ *
+ * prepare the necessary information for creating the CRCs. This
+ * must be done before the final save, as it will require memory
+ * allocating, and thus touching bits of the kernel we do not
+ * know about.
+*/
+
+static void s3c2410_pm_check_prepare(void)
+{
+	crc_size = 0;
+
+	s3c2410_pm_run_sysram(s3c2410_pm_countram, &crc_size);
+
+	DBG("s3c2410_pm_prepare_check: %u checks needed\n", crc_size);
+
+	crcs = kmalloc(crc_size+4, GFP_KERNEL);
+	if (crcs == NULL)
+		printk(KERN_ERR "Cannot allocated CRC save area\n");
+}
+
+static u32 *s3c2410_pm_makecheck(struct resource *res, u32 *val)
+{
+	unsigned long addr, left;
+
+	for (addr = res->start; addr < res->end;
+	     addr += CHECK_CHUNKSIZE) {
+		left = res->end - addr;
+
+		if (left > CHECK_CHUNKSIZE)
+			left = CHECK_CHUNKSIZE;
+
+		*val = crc32_le(~0, phys_to_virt(addr), left);
+		val++;
+	}
+
+	return val;
+}
+
+/* s3c2410_pm_check_store
+ *
+ * compute the CRC values for the memory blocks before the final
+ * sleep.
+*/
+
+static void s3c2410_pm_check_store(void)
+{
+	if (crcs != NULL)
+		s3c2410_pm_run_sysram(s3c2410_pm_makecheck, crcs);
+}
+
+/* in_region
+ *
+ * return TRUE if the area defined by ptr..ptr+size contatins the
+ * what..what+whatsz
+*/
+
+static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
+{
+	if ((what+whatsz) < ptr)
+		return 0;
+
+	if (what > (ptr+size))
+		return 0;
+
+	return 1;
+}
+
+static u32 *s3c2410_pm_runcheck(struct resource *res, u32 *val)
+{
+	void *save_at = phys_to_virt(s3c2410_sleep_save_phys);
+	unsigned long addr;
+	unsigned long left;
+	void *ptr;
+	u32 calc;
+
+	for (addr = res->start; addr < res->end;
+	     addr += CHECK_CHUNKSIZE) {
+		left = res->end - addr;
+
+		if (left > CHECK_CHUNKSIZE)
+			left = CHECK_CHUNKSIZE;
+
+		ptr = phys_to_virt(addr);
+
+		if (in_region(ptr, left, crcs, crc_size)) {
+			DBG("skipping %08lx, has crc block in\n", addr);
+			goto skip_check;
+		}
+
+		if (in_region(ptr, left, save_at, 32*4 )) {
+			DBG("skipping %08lx, has save block in\n", addr);
+			goto skip_check;
+		}
+
+		/* calculate and check the checksum */
+
+		calc = crc32_le(~0, ptr, left);
+		if (calc != *val) {
+			printk(KERN_ERR PFX "Restore CRC error at "
+			       "%08lx (%08x vs %08x)\n", addr, calc, *val);
+
+			DBG("Restore CRC error at %08lx (%08x vs %08x)\n",
+			    addr, calc, *val);
+		}
+
+	skip_check:
+		val++;
+	}
+
+	return val;
+}
+
+/* s3c2410_pm_check_restore
+ *
+ * check the CRCs after the restore event and free the memory used
+ * to hold them
+*/
+
+static void s3c2410_pm_check_restore(void)
+{
+	if (crcs != NULL) {
+		s3c2410_pm_run_sysram(s3c2410_pm_runcheck, crcs);
+		kfree(crcs);
+		crcs = NULL;
+	}
+}
+
+#else
+
+#define s3c2410_pm_check_prepare() do { } while(0)
+#define s3c2410_pm_check_restore() do { } while(0)
+#define s3c2410_pm_check_store()   do { } while(0)
+#endif
+
+/* helper functions to save and restore register state */
+
+void s3c2410_pm_do_save(struct sleep_save *ptr, int count)
+{
+	for (; count > 0; count--, ptr++) {
+		ptr->val = __raw_readl(ptr->reg);
+		DBG("saved %p value %08lx\n", ptr->reg, ptr->val);
+	}
+}
+
+/* s3c2410_pm_do_restore
+ *
+ * restore the system from the given list of saved registers
+ *
+ * Note, we do not use DBG() in here, as the system may not have
+ * restore the UARTs state yet
+*/
+
+void s3c2410_pm_do_restore(struct sleep_save *ptr, int count)
+{
+	for (; count > 0; count--, ptr++) {
+		printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n",
+		       ptr->reg, ptr->val, __raw_readl(ptr->reg));
+
+		__raw_writel(ptr->val, ptr->reg);
+	}
+}
+
+/* s3c2410_pm_do_restore_core
+ *
+ * similar to s3c2410_pm_do_restore_core
+ *
+ * WARNING: Do not put any debug in here that may effect memory or use
+ * peripherals, as things may be changing!
+*/
+
+static void s3c2410_pm_do_restore_core(struct sleep_save *ptr, int count)
+{
+	for (; count > 0; count--, ptr++) {
+		__raw_writel(ptr->val, ptr->reg);
+	}
+}
+
+/* s3c2410_pm_show_resume_irqs
+ *
+ * print any IRQs asserted at resume time (ie, we woke from)
+*/
+
+static void s3c2410_pm_show_resume_irqs(int start, unsigned long which,
+					unsigned long mask)
+{
+	int i;
+
+	which &= ~mask;
+
+	for (i = 0; i <= 31; i++) {
+		if ((which) & (1L<<i)) {
+			DBG("IRQ %d asserted at resume\n", start+i);
+		}
+	}
+}
+
+/* s3c2410_pm_check_resume_pin
+ *
+ * check to see if the pin is configured correctly for sleep mode, and
+ * make any necessary adjustments if it is not
+*/
+
+static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
+{
+	unsigned long irqstate;
+	unsigned long pinstate;
+	int irq = s3c2410_gpio_getirq(pin);
+
+	if (irqoffs < 4)
+		irqstate = s3c_irqwake_intmask & (1L<<irqoffs);
+	else
+		irqstate = s3c_irqwake_eintmask & (1L<<irqoffs);
+
+	pinstate = s3c2410_gpio_getcfg(pin);
+
+	if (!irqstate) {
+		if (pinstate == S3C2410_GPIO_IRQ)
+			DBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin);
+	} else {
+		if (pinstate == S3C2410_GPIO_IRQ) {
+			DBG("Disabling IRQ %d (pin %d)\n", irq, pin);
+			s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
+		}
+	}
+}
+
+/* s3c2410_pm_configure_extint
+ *
+ * configure all external interrupt pins
+*/
+
+static void s3c2410_pm_configure_extint(void)
+{
+	int pin;
+
+	/* for each of the external interrupts (EINT0..EINT15) we
+	 * need to check wether it is an external interrupt source,
+	 * and then configure it as an input if it is not
+	*/
+
+	for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) {
+		s3c2410_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
+	}
+
+	for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) {
+		s3c2410_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
+	}
+}
+
+void (*pm_cpu_prep)(void);
+void (*pm_cpu_sleep)(void);
+
+#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
+
+/* s3c2410_pm_enter
+ *
+ * central control for sleep/resume process
+*/
+
+static int s3c2410_pm_enter(suspend_state_t state)
+{
+	unsigned long regs_save[16];
+
+	/* ensure the debug is initialised (if enabled) */
+
+	s3c2410_pm_debug_init();
+
+	DBG("s3c2410_pm_enter(%d)\n", state);
+
+	if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
+		printk(KERN_ERR PFX "error: no cpu sleep functions set\n");
+		return -EINVAL;
+	}
+
+	if (state != PM_SUSPEND_MEM) {
+		printk(KERN_ERR PFX "error: only PM_SUSPEND_MEM supported\n");
+		return -EINVAL;
+	}
+
+	/* check if we have anything to wake-up with... bad things seem
+	 * to happen if you suspend with no wakeup (system will often
+	 * require a full power-cycle)
+	*/
+
+	if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
+	    !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
+		printk(KERN_ERR PFX "No sources enabled for wake-up!\n");
+		printk(KERN_ERR PFX "Aborting sleep\n");
+		return -EINVAL;
+	}
+
+	/* prepare check area if configured */
+
+	s3c2410_pm_check_prepare();
+
+	/* store the physical address of the register recovery block */
+
+	s3c2410_sleep_save_phys = virt_to_phys(regs_save);
+
+	DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys);
+
+	/* save all necessary core registers not covered by the drivers */
+
+	s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save));
+	s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save));
+	s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save));
+
+	/* set the irq configuration for wake */
+
+	s3c2410_pm_configure_extint();
+
+	DBG("sleep: irq wakeup masks: %08lx,%08lx\n",
+	    s3c_irqwake_intmask, s3c_irqwake_eintmask);
+
+	__raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
+	__raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK);
+
+	/* ack any outstanding external interrupts before we go to sleep */
+
+	__raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
+	__raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
+	__raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
+
+	/* call cpu specific preperation */
+
+	pm_cpu_prep();
+
+	/* flush cache back to ram */
+
+	flush_cache_all();
+
+	s3c2410_pm_check_store();
+
+	/* send the cpu to sleep... */
+
+	__raw_writel(0x00, S3C2410_CLKCON);  /* turn off clocks over sleep */
+
+	/* s3c2410_cpu_save will also act as our return point from when
+	 * we resume as it saves its own register state, so use the return
+	 * code to differentiate return from save and return from sleep */
+
+	if (s3c2410_cpu_save(regs_save) == 0) {
+		flush_cache_all();
+		pm_cpu_sleep();
+	}
+
+	/* restore the cpu state */
+
+	cpu_init();
+
+	/* restore the system state */
+
+	s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
+	s3c2410_pm_do_restore(gpio_save, ARRAY_SIZE(gpio_save));
+	s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save));
+
+	s3c2410_pm_debug_init();
+
+	/* check what irq (if any) restored the system */
+
+	DBG("post sleep: IRQs 0x%08x, 0x%08x\n",
+	    __raw_readl(S3C2410_SRCPND),
+	    __raw_readl(S3C2410_EINTPEND));
+
+	s3c2410_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND),
+				    s3c_irqwake_intmask);
+
+	s3c2410_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
+				    s3c_irqwake_eintmask);
+
+	DBG("post sleep, preparing to return\n");
+
+	s3c2410_pm_check_restore();
+
+	/* ok, let's return from sleep */
+
+	DBG("S3C2410 PM Resume (post-restore)\n");
+	return 0;
+}
+
+/*
+ * Called after processes are frozen, but before we shut down devices.
+ */
+static int s3c2410_pm_prepare(suspend_state_t state)
+{
+	return 0;
+}
+
+/*
+ * Called after devices are re-setup, but before processes are thawed.
+ */
+static int s3c2410_pm_finish(suspend_state_t state)
+{
+	return 0;
+}
+
+/*
+ * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
+ */
+static struct pm_ops s3c2410_pm_ops = {
+	.pm_disk_mode	= PM_DISK_FIRMWARE,
+	.prepare	= s3c2410_pm_prepare,
+	.enter		= s3c2410_pm_enter,
+	.finish		= s3c2410_pm_finish,
+};
+
+/* s3c2410_pm_init
+ *
+ * Attach the power management functions. This should be called
+ * from the board specific initialisation if the board supports
+ * it.
+*/
+
+int __init s3c2410_pm_init(void)
+{
+	printk("S3C2410 Power Management, (c) 2004 Simtec Electronics\n");
+
+	pm_set_ops(&s3c2410_pm_ops);
+	return 0;
+}
diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/plat-s3c24xx/s3c244x-irq.c
new file mode 100644
index 0000000..a0e39d8
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c244x-irq.c
@@ -0,0 +1,146 @@
+/* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/mach/irq.h>
+
+#include <asm/arch/regs-irq.h>
+#include <asm/arch/regs-gpio.h>
+
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
+#include <asm/plat-s3c24xx/irq.h>
+
+/* camera irq */
+
+static void s3c_irq_demux_cam(unsigned int irq,
+			      struct irq_desc *desc)
+{
+	unsigned int subsrc, submsk;
+	struct irq_desc *mydesc;
+
+	/* read the current pending interrupts, and the mask
+	 * for what it is available */
+
+	subsrc = __raw_readl(S3C2410_SUBSRCPND);
+	submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+	subsrc &= ~submsk;
+	subsrc >>= 11;
+	subsrc &= 3;
+
+	if (subsrc != 0) {
+		if (subsrc & 1) {
+			mydesc = irq_desc + IRQ_S3C2440_CAM_C;
+			desc_handle_irq(IRQ_S3C2440_CAM_C, mydesc);
+		}
+		if (subsrc & 2) {
+			mydesc = irq_desc + IRQ_S3C2440_CAM_P;
+			desc_handle_irq(IRQ_S3C2440_CAM_P, mydesc);
+		}
+	}
+}
+
+#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
+
+static void
+s3c_irq_cam_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_CAM, 3<<11);
+}
+
+static void
+s3c_irq_cam_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_CAM);
+}
+
+static void
+s3c_irq_cam_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_CAM, 3<<11);
+}
+
+static struct irq_chip s3c_irq_cam = {
+	.mask	    = s3c_irq_cam_mask,
+	.unmask	    = s3c_irq_cam_unmask,
+	.ack	    = s3c_irq_cam_ack,
+};
+
+static int s3c244x_irq_add(struct sys_device *sysdev)
+{
+	unsigned int irqno;
+
+	set_irq_chip(IRQ_NFCON, &s3c_irq_level_chip);
+	set_irq_handler(IRQ_NFCON, handle_level_irq);
+	set_irq_flags(IRQ_NFCON, IRQF_VALID);
+
+	/* add chained handler for camera */
+
+	set_irq_chip(IRQ_CAM, &s3c_irq_level_chip);
+	set_irq_handler(IRQ_CAM, handle_level_irq);
+	set_irq_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
+
+	for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
+		set_irq_chip(irqno, &s3c_irq_cam);
+		set_irq_handler(irqno, handle_level_irq);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2440_irq_driver = {
+	.add		= s3c244x_irq_add,
+	.suspend	= s3c24xx_irq_suspend,
+	.resume		= s3c24xx_irq_resume,
+};
+
+static int s3c2440_irq_init(void)
+{
+	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_irq_driver);
+}
+
+arch_initcall(s3c2440_irq_init);
+
+static struct sysdev_driver s3c2442_irq_driver = {
+	.add		= s3c244x_irq_add,
+	.suspend	= s3c24xx_irq_suspend,
+	.resume		= s3c24xx_irq_resume,
+};
+
+
+static int s3c2442_irq_init(void)
+{
+	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_irq_driver);
+}
+
+arch_initcall(s3c2442_irq_init);
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
new file mode 100644
index 0000000..87aace4
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -0,0 +1,184 @@
+/* linux/arch/arm/plat-s3c24xx/s3c244x.c
+ *
+ * Copyright (c) 2004-2006 Simtec Electronics
+ *   Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C2440 and S3C2442 Mobile CPU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <asm/arch/regs-clock.h>
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-gpioj.h>
+#include <asm/arch/regs-dsc.h>
+
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2440.h>
+#include "s3c244x.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
+
+static struct map_desc s3c244x_iodesc[] __initdata = {
+	IODESC_ENT(CLKPWR),
+	IODESC_ENT(TIMER),
+	IODESC_ENT(WATCHDOG),
+	IODESC_ENT(LCD),
+};
+
+/* uart initialisation */
+
+void __init s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
+}
+
+void __init s3c244x_map_io(struct map_desc *mach_desc, int size)
+{
+	/* register our io-tables */
+
+	iotable_init(s3c244x_iodesc, ARRAY_SIZE(s3c244x_iodesc));
+	iotable_init(mach_desc, size);
+
+	/* rename any peripherals used differing from the s3c2410 */
+
+	s3c_device_i2c.name  = "s3c2440-i2c";
+	s3c_device_nand.name = "s3c2440-nand";
+	s3c_device_usbgadget.name = "s3c2440-usbgadget";
+}
+
+void __init s3c244x_init_clocks(int xtal)
+{
+	unsigned long clkdiv;
+	unsigned long camdiv;
+	unsigned long hclk, fclk, pclk;
+	int hdiv = 1;
+
+	/* now we've got our machine bits initialised, work out what
+	 * clocks we've got */
+
+	fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
+
+	clkdiv = __raw_readl(S3C2410_CLKDIVN);
+	camdiv = __raw_readl(S3C2440_CAMDIVN);
+
+	/* work out clock scalings */
+
+	switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) {
+	case S3C2440_CLKDIVN_HDIVN_1:
+		hdiv = 1;
+		break;
+
+	case S3C2440_CLKDIVN_HDIVN_2:
+		hdiv = 2;
+		break;
+
+	case S3C2440_CLKDIVN_HDIVN_4_8:
+		hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4;
+		break;
+
+	case S3C2440_CLKDIVN_HDIVN_3_6:
+		hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3;
+		break;
+	}
+
+	hclk = fclk / hdiv;
+	pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN)? 2:1);
+
+	/* print brief summary of clocks, etc */
+
+	printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
+	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
+
+	/* initialise the clocks here, to allow other things like the
+	 * console to use them, and to add new ones after the initialisation
+	 */
+
+	s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
+	s3c2410_baseclk_add();
+}
+
+#ifdef CONFIG_PM
+
+static struct sleep_save s3c244x_sleep[] = {
+	SAVE_ITEM(S3C2440_DSC0),
+	SAVE_ITEM(S3C2440_DSC1),
+	SAVE_ITEM(S3C2440_GPJDAT),
+	SAVE_ITEM(S3C2440_GPJCON),
+	SAVE_ITEM(S3C2440_GPJUP)
+};
+
+static int s3c244x_suspend(struct sys_device *dev, pm_message_t state)
+{
+	s3c2410_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+	return 0;
+}
+
+static int s3c244x_resume(struct sys_device *dev)
+{
+	s3c2410_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+	return 0;
+}
+
+#else
+#define s3c244x_suspend NULL
+#define s3c244x_resume  NULL
+#endif
+
+/* Since the S3C2442 and S3C2440 share  items, put both sysclasses here */
+
+struct sysdev_class s3c2440_sysclass = {
+	set_kset_name("s3c2440-core"),
+	.suspend	= s3c244x_suspend,
+	.resume		= s3c244x_resume
+};
+
+struct sysdev_class s3c2442_sysclass = {
+	set_kset_name("s3c2442-core"),
+	.suspend	= s3c244x_suspend,
+	.resume		= s3c244x_resume
+};
+
+/* need to register class before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2440 based system)
+ * as a driver which may support both 2410 and 2440 may try and use it.
+*/
+
+static int __init s3c2440_core_init(void)
+{
+	return sysdev_class_register(&s3c2440_sysclass);
+}
+
+core_initcall(s3c2440_core_init);
+
+static int __init s3c2442_core_init(void)
+{
+	return sysdev_class_register(&s3c2442_sysclass);
+}
+
+core_initcall(s3c2442_core_init);
diff --git a/arch/arm/plat-s3c24xx/s3c244x.h b/arch/arm/plat-s3c24xx/s3c244x.h
new file mode 100644
index 0000000..f8ed176
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c244x.h
@@ -0,0 +1,25 @@
+/* linux/arch/arm/plat-s3c24xx/s3c244x.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C2440 and S3C2442 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+
+extern void s3c244x_map_io(struct map_desc *mach_desc, int size);
+
+extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c244x_init_clocks(int xtal);
+
+#else
+#define s3c244x_init_clocks NULL
+#define s3c244x_init_uarts NULL
+#define s3c244x_map_io NULL
+#endif
diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S
new file mode 100644
index 0000000..2018c2e
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/sleep.S
@@ -0,0 +1,159 @@
+/* linux/arch/arm/mach-s3c2410/sleep.S
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 Power Manager (Suspend-To-RAM) support
+ *
+ * Based on PXA/SA1100 sleep code by:
+ *	Nicolas Pitre, (c) 2002 Monta Vista Software Inc
+ *	Cliff Brake, (c) 2001
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/hardware.h>
+#include <asm/arch/map.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-clock.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-serial.h>
+
+/* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
+ * reset the UART configuration, only enable if you really need this!
+*/
+//#define CONFIG_DEBUG_RESUME
+
+	.text
+
+	/* s3c2410_cpu_save
+	 *
+	 * save enough of the CPU state to allow us to re-start
+	 * pm.c code. as we store items like the sp/lr, we will
+	 * end up returning from this function when the cpu resumes
+	 * so the return value is set to mark this.
+	 *
+	 * This arangement means we avoid having to flush the cache
+	 * from this code.
+	 *
+	 * entry:
+	 *	r0 = pointer to save block
+	 *
+	 * exit:
+	 *	r0 = 0 => we stored everything
+	 *	     1 => resumed from sleep
+	*/
+
+ENTRY(s3c2410_cpu_save)
+	stmfd	sp!, { r4 - r12, lr }
+
+	@@ store co-processor registers
+
+	mrc	p15, 0, r4, c15, c1, 0	@ CP access register
+	mrc	p15, 0, r5, c13, c0, 0	@ PID
+	mrc	p15, 0, r6, c3, c0, 0	@ Domain ID
+	mrc	p15, 0, r7, c2, c0, 0	@ translation table base address
+	mrc	p15, 0, r8, c1, c0, 0	@ control register
+
+	stmia	r0, { r4 - r13 }
+
+	mov	r0, #0
+	ldmfd	sp, { r4 - r12, pc }
+
+	@@ return to the caller, after having the MMU
+	@@ turned on, this restores the last bits from the
+	@@ stack
+resume_with_mmu:
+	mov	r0, #1
+	ldmfd	sp!, { r4 - r12, pc }
+
+	.ltorg
+
+	@@ the next bits sit in the .data segment, even though they
+	@@ happen to be code... the s3c2410_sleep_save_phys needs to be
+	@@ accessed by the resume code before it can restore the MMU.
+	@@ This means that the variable has to be close enough for the
+	@@ code to read it... since the .text segment needs to be RO,
+	@@ the data segment can be the only place to put this code.
+
+	.data
+
+	.global	s3c2410_sleep_save_phys
+s3c2410_sleep_save_phys:
+	.word	0
+
+	/* s3c2410_cpu_resume
+	 *
+	 * resume code entry for bootloader to call
+	 *
+	 * we must put this code here in the data segment as we have no
+	 * other way of restoring the stack pointer after sleep, and we
+	 * must not write to the code segment (code is read-only)
+	*/
+
+ENTRY(s3c2410_cpu_resume)
+	mov	r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
+	msr	cpsr_c, r0
+
+	@@ load UART to allow us to print the two characters for
+	@@ resume debug
+
+	mov	r2, #S3C24XX_PA_UART & 0xff000000
+	orr	r2, r2, #S3C24XX_PA_UART & 0xff000
+
+#if 0
+	/* SMDK2440 LED set */
+	mov	r14, #S3C24XX_PA_GPIO
+	ldr	r12, [ r14, #0x54 ]
+	bic	r12, r12, #3<<4
+	orr	r12, r12, #1<<7
+	str	r12, [ r14, #0x54 ]
+#endif
+
+#ifdef CONFIG_DEBUG_RESUME
+	mov	r3, #'L'
+	strb	r3, [ r2, #S3C2410_UTXH ]
+1001:
+	ldrb	r14, [ r3, #S3C2410_UTRSTAT ]
+	tst	r14, #S3C2410_UTRSTAT_TXE
+	beq	1001b
+#endif /* CONFIG_DEBUG_RESUME */
+
+	mov	r1, #0
+	mcr	p15, 0, r1, c8, c7, 0		@@ invalidate I & D TLBs
+	mcr	p15, 0, r1, c7, c7, 0		@@ invalidate I & D caches
+
+	ldr	r0, s3c2410_sleep_save_phys	@ address of restore block
+	ldmia	r0, { r4 - r13 }
+
+	mcr	p15, 0, r4, c15, c1, 0		@ CP access register
+	mcr	p15, 0, r5, c13, c0, 0		@ PID
+	mcr	p15, 0, r6, c3, c0, 0		@ Domain ID
+	mcr	p15, 0, r7, c2, c0, 0		@ translation table base
+
+#ifdef CONFIG_DEBUG_RESUME
+	mov	r3, #'R'
+	strb	r3, [ r2, #S3C2410_UTXH ]
+#endif
+
+	ldr	r2, =resume_with_mmu
+	mcr	p15, 0, r8, c1, c0, 0		@ turn on MMU, etc
+	nop					@ second-to-last before mmu
+	mov	pc, r2				@ go back to virtual address
+
+	.ltorg
diff --git a/arch/arm/plat-s3c24xx/time.c b/arch/arm/plat-s3c24xx/time.c
new file mode 100644
index 0000000..c523d1c
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/time.c
@@ -0,0 +1,262 @@
+/* linux/arch/arm/plat-s3c24xx/time.c
+ *
+ * Copyright (C) 2003-2005 Simtec Electronics
+ *	Ben Dooks, <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
+#include <asm/system.h>
+#include <asm/leds.h>
+#include <asm/mach-types.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/arch/map.h>
+#include <asm/arch/regs-timer.h>
+#include <asm/arch/regs-irq.h>
+#include <asm/mach/time.h>
+
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+static unsigned long timer_startval;
+static unsigned long timer_usec_ticks;
+
+#define TIMER_USEC_SHIFT 16
+
+/* we use the shifted arithmetic to work out the ratio of timer ticks
+ * to usecs, as often the peripheral clock is not a nice even multiple
+ * of 1MHz.
+ *
+ * shift of 14 and 15 are too low for the 12MHz, 16 seems to be ok
+ * for the current HZ value of 200 without producing overflows.
+ *
+ * Original patch by Dimitry Andric, updated by Ben Dooks
+*/
+
+
+/* timer_mask_usec_ticks
+ *
+ * given a clock and divisor, make the value to pass into timer_ticks_to_usec
+ * to scale the ticks into usecs
+*/
+
+static inline unsigned long
+timer_mask_usec_ticks(unsigned long scaler, unsigned long pclk)
+{
+	unsigned long den = pclk / 1000;
+
+	return ((1000 << TIMER_USEC_SHIFT) * scaler + (den >> 1)) / den;
+}
+
+/* timer_ticks_to_usec
+ *
+ * convert timer ticks to usec.
+*/
+
+static inline unsigned long timer_ticks_to_usec(unsigned long ticks)
+{
+	unsigned long res;
+
+	res = ticks * timer_usec_ticks;
+	res += 1 << (TIMER_USEC_SHIFT - 4);	/* round up slightly */
+
+	return res >> TIMER_USEC_SHIFT;
+}
+
+/***
+ * Returns microsecond  since last clock interrupt.  Note that interrupts
+ * will have been disabled by do_gettimeoffset()
+ * IRQs are disabled before entering here from do_gettimeofday()
+ */
+
+#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0))
+
+static unsigned long s3c2410_gettimeoffset (void)
+{
+	unsigned long tdone;
+	unsigned long irqpend;
+	unsigned long tval;
+
+	/* work out how many ticks have gone since last timer interrupt */
+
+        tval =  __raw_readl(S3C2410_TCNTO(4));
+	tdone = timer_startval - tval;
+
+	/* check to see if there is an interrupt pending */
+
+	irqpend = __raw_readl(S3C2410_SRCPND);
+	if (irqpend & SRCPND_TIMER4) {
+		/* re-read the timer, and try and fix up for the missed
+		 * interrupt. Note, the interrupt may go off before the
+		 * timer has re-loaded from wrapping.
+		 */
+
+		tval =  __raw_readl(S3C2410_TCNTO(4));
+		tdone = timer_startval - tval;
+
+		if (tval != 0)
+			tdone += timer_startval;
+	}
+
+	return timer_ticks_to_usec(tdone);
+}
+
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t
+s3c2410_timer_interrupt(int irq, void *dev_id)
+{
+	write_seqlock(&xtime_lock);
+	timer_tick();
+	write_sequnlock(&xtime_lock);
+	return IRQ_HANDLED;
+}
+
+static struct irqaction s3c2410_timer_irq = {
+	.name		= "S3C2410 Timer Tick",
+	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.handler	= s3c2410_timer_interrupt,
+};
+
+#define use_tclk1_12() ( \
+	machine_is_bast()	|| \
+	machine_is_vr1000()	|| \
+	machine_is_anubis()	|| \
+	machine_is_osiris() )
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ *
+ * Currently we only use timer4, as it is the only timer which has no
+ * other function that can be exploited externally
+ */
+static void s3c2410_timer_setup (void)
+{
+	unsigned long tcon;
+	unsigned long tcnt;
+	unsigned long tcfg1;
+	unsigned long tcfg0;
+
+	tcnt = 0xffff;  /* default value for tcnt */
+
+	/* read the current timer configuration bits */
+
+	tcon = __raw_readl(S3C2410_TCON);
+	tcfg1 = __raw_readl(S3C2410_TCFG1);
+	tcfg0 = __raw_readl(S3C2410_TCFG0);
+
+	/* configure the system for whichever machine is in use */
+
+	if (use_tclk1_12()) {
+		/* timer is at 12MHz, scaler is 1 */
+		timer_usec_ticks = timer_mask_usec_ticks(1, 12000000);
+		tcnt = 12000000 / HZ;
+
+		tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
+		tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1;
+	} else {
+		unsigned long pclk;
+		struct clk *clk;
+
+		/* for the h1940 (and others), we use the pclk from the core
+		 * to generate the timer values. since values around 50 to
+		 * 70MHz are not values we can directly generate the timer
+		 * value from, we need to pre-scale and divide before using it.
+		 *
+		 * for instance, using 50.7MHz and dividing by 6 gives 8.45MHz
+		 * (8.45 ticks per usec)
+		 */
+
+		/* this is used as default if no other timer can be found */
+
+		clk = clk_get(NULL, "timers");
+		if (IS_ERR(clk))
+			panic("failed to get clock for system timer");
+
+		clk_enable(clk);
+
+		pclk = clk_get_rate(clk);
+
+		/* configure clock tick */
+
+		timer_usec_ticks = timer_mask_usec_ticks(6, pclk);
+
+		tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
+		tcfg1 |= S3C2410_TCFG1_MUX4_DIV2;
+
+		tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
+		tcfg0 |= ((6 - 1) / 2) << S3C2410_TCFG_PRESCALER1_SHIFT;
+
+		tcnt = (pclk / 6) / HZ;
+	}
+
+	/* timers reload after counting zero, so reduce the count by 1 */
+
+	tcnt--;
+
+	printk("timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n",
+	       tcon, tcnt, tcfg0, tcfg1, timer_usec_ticks);
+
+	/* check to see if timer is within 16bit range... */
+	if (tcnt > 0xffff) {
+		panic("setup_timer: HZ is too small, cannot configure timer!");
+		return;
+	}
+
+	__raw_writel(tcfg1, S3C2410_TCFG1);
+	__raw_writel(tcfg0, S3C2410_TCFG0);
+
+	timer_startval = tcnt;
+	__raw_writel(tcnt, S3C2410_TCNTB(4));
+
+	/* ensure timer is stopped... */
+
+	tcon &= ~(7<<20);
+	tcon |= S3C2410_TCON_T4RELOAD;
+	tcon |= S3C2410_TCON_T4MANUALUPD;
+
+	__raw_writel(tcon, S3C2410_TCON);
+	__raw_writel(tcnt, S3C2410_TCNTB(4));
+	__raw_writel(tcnt, S3C2410_TCMPB(4));
+
+	/* start the timer running */
+	tcon |= S3C2410_TCON_T4START;
+	tcon &= ~S3C2410_TCON_T4MANUALUPD;
+	__raw_writel(tcon, S3C2410_TCON);
+}
+
+static void __init s3c2410_timer_init (void)
+{
+	s3c2410_timer_setup();
+	setup_irq(IRQ_TIMER4, &s3c2410_timer_irq);
+}
+
+struct sys_timer s3c24xx_timer = {
+	.init		= s3c2410_timer_init,
+	.offset		= s3c2410_gettimeoffset,
+	.resume		= s3c2410_timer_setup
+};
diff --git a/include/asm-arm/plat-s3c24xx/clock.h b/include/asm-arm/plat-s3c24xx/clock.h
new file mode 100644
index 0000000..f6135db
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/clock.h
@@ -0,0 +1,63 @@
+/* linux/include/asm-arm/plat-s3c24xx/clock.h
+ * linux/arch/arm/mach-s3c2410/clock.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/SWLINUX/
+ *	Written by Ben Dooks, <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct clk {
+	struct list_head      list;
+	struct module        *owner;
+	struct clk           *parent;
+	const char           *name;
+	int		      id;
+	int		      usage;
+	unsigned long         rate;
+	unsigned long         ctrlbit;
+
+	int		    (*enable)(struct clk *, int enable);
+	int		    (*set_rate)(struct clk *c, unsigned long rate);
+	unsigned long	    (*get_rate)(struct clk *c);
+	unsigned long	    (*round_rate)(struct clk *c, unsigned long rate);
+	int		    (*set_parent)(struct clk *c, struct clk *parent);
+};
+
+/* other clocks which may be registered by board support */
+
+extern struct clk s3c24xx_dclk0;
+extern struct clk s3c24xx_dclk1;
+extern struct clk s3c24xx_clkout0;
+extern struct clk s3c24xx_clkout1;
+extern struct clk s3c24xx_uclk;
+
+extern struct clk clk_usb_bus;
+
+/* core clock support */
+
+extern struct clk clk_f;
+extern struct clk clk_h;
+extern struct clk clk_p;
+extern struct clk clk_mpll;
+extern struct clk clk_upll;
+extern struct clk clk_xtal;
+
+/* exports for arch/arm/mach-s3c2410
+ *
+ * Please DO NOT use these outside of arch/arm/mach-s3c2410
+*/
+
+extern struct mutex clocks_mutex;
+
+extern int s3c2410_clkcon_enable(struct clk *clk, int enable);
+
+extern int s3c24xx_register_clock(struct clk *clk);
+
+extern int s3c24xx_setup_clocks(unsigned long xtal,
+				unsigned long fclk,
+				unsigned long hclk,
+				unsigned long pclk);
diff --git a/include/asm-arm/plat-s3c24xx/common-smdk.h b/include/asm-arm/plat-s3c24xx/common-smdk.h
new file mode 100644
index 0000000..58d9094
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/common-smdk.h
@@ -0,0 +1,15 @@
+/* linux/include/asm-arm/plat-s3c24xx/common-smdk.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Common code for SMDK2410 and SMDK2440 boards
+ *
+ * http://www.fluff.org/ben/smdk2440/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern void smdk_machine_init(void);
diff --git a/include/asm-arm/plat-s3c24xx/cpu.h b/include/asm-arm/plat-s3c24xx/cpu.h
new file mode 100644
index 0000000..8181b22
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/cpu.h
@@ -0,0 +1,69 @@
+/* linux/include/asm-arm/plat-s3c24xx/cpu.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C24XX CPU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* todo - fix when rmk changes iodescs to use `void __iomem *` */
+
+#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
+
+#ifndef MHZ
+#define MHZ (1000*1000)
+#endif
+
+#define print_mhz(m) ((m) / MHZ), ((m / 1000) % 1000)
+
+/* forward declaration */
+struct s3c24xx_uart_resources;
+struct platform_device;
+struct s3c2410_uartcfg;
+struct map_desc;
+
+/* core initialisation functions */
+
+extern void s3c24xx_init_irq(void);
+
+extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
+
+extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c24xx_init_clocks(int xtal);
+
+extern void s3c24xx_init_uartdevs(char *name,
+				  struct s3c24xx_uart_resources *res,
+				  struct s3c2410_uartcfg *cfg, int no);
+
+/* the board structure is used at first initialsation time
+ * to get info such as the devices to register for this
+ * board. This is done because platfrom_add_devices() cannot
+ * be called from the map_io entry.
+*/
+
+struct s3c24xx_board {
+	struct platform_device  **devices;
+	unsigned int              devices_count;
+
+	struct clk		**clocks;
+	unsigned int		  clocks_count;
+};
+
+extern void s3c24xx_set_board(struct s3c24xx_board *board);
+
+/* timer for 2410/2440 */
+
+struct sys_timer;
+extern struct sys_timer s3c24xx_timer;
+
+/* system device classes */
+
+extern struct sysdev_class s3c2410_sysclass;
+extern struct sysdev_class s3c2412_sysclass;
+extern struct sysdev_class s3c2440_sysclass;
+extern struct sysdev_class s3c2442_sysclass;
diff --git a/include/asm-arm/plat-s3c24xx/devs.h b/include/asm-arm/plat-s3c24xx/devs.h
new file mode 100644
index 0000000..dddf485
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/devs.h
@@ -0,0 +1,51 @@
+/* linux/include/asm-arm/plat-s3c24xx/devs.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2410 standard platform devices
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+#include <linux/platform_device.h>
+
+struct s3c24xx_uart_resources {
+	struct resource		*resources;
+	unsigned long		 nr_resources;
+};
+
+extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
+
+extern struct platform_device *s3c24xx_uart_devs[];
+extern struct platform_device *s3c24xx_uart_src[];
+
+extern struct platform_device s3c_device_usb;
+extern struct platform_device s3c_device_lcd;
+extern struct platform_device s3c_device_wdt;
+extern struct platform_device s3c_device_i2c;
+extern struct platform_device s3c_device_iis;
+extern struct platform_device s3c_device_rtc;
+extern struct platform_device s3c_device_adc;
+extern struct platform_device s3c_device_sdi;
+
+extern struct platform_device s3c_device_spi0;
+extern struct platform_device s3c_device_spi1;
+
+extern struct platform_device s3c_device_nand;
+
+extern struct platform_device s3c_device_timer0;
+extern struct platform_device s3c_device_timer1;
+extern struct platform_device s3c_device_timer2;
+extern struct platform_device s3c_device_timer3;
+
+extern struct platform_device s3c_device_usbgadget;
+
+/* s3c2440 specific devices */
+
+#ifdef CONFIG_CPU_S3C2440
+
+extern struct platform_device s3c_device_camif;
+
+#endif
diff --git a/include/asm-arm/plat-s3c24xx/dma.h b/include/asm-arm/plat-s3c24xx/dma.h
new file mode 100644
index 0000000..421b567
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/dma.h
@@ -0,0 +1,45 @@
+/* linux/include/asm-arm/plat-s3c24xx/dma.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C24XX DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern struct sysdev_class dma_sysclass;
+extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
+
+#define DMA_CH_VALID		(1<<31)
+
+struct s3c24xx_dma_addr {
+	unsigned long		from;
+	unsigned long		to;
+};
+
+/* struct s3c24xx_dma_map
+ *
+ * this holds the mapping information for the channel selected
+ * to be connected to the specified device
+*/
+
+struct s3c24xx_dma_map {
+	const char		*name;
+	struct s3c24xx_dma_addr  hw_addr;
+
+	unsigned long		 channels[S3C2410_DMA_CHANNELS];
+};
+
+struct s3c24xx_dma_selection {
+	struct s3c24xx_dma_map	*map;
+	unsigned long		 map_size;
+	unsigned long		 dcon_mask;
+
+	void	(*select)(struct s3c2410_dma_chan *chan,
+			  struct s3c24xx_dma_map *map);
+};
+
+extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
diff --git a/include/asm-arm/plat-s3c24xx/irq.h b/include/asm-arm/plat-s3c24xx/irq.h
new file mode 100644
index 0000000..8af6d95
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/irq.h
@@ -0,0 +1,107 @@
+/* linux/include/asm-arm/plat-s3c24xx/irq.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C24XX CPU IRQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define irqdbf(x...)
+#define irqdbf2(x...)
+
+#define EXTINT_OFF (IRQ_EINT4 - 4)
+
+extern struct irq_chip s3c_irq_level_chip;
+
+static inline void
+s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
+		int subcheck)
+{
+	unsigned long mask;
+	unsigned long submask;
+
+	submask = __raw_readl(S3C2410_INTSUBMSK);
+	mask = __raw_readl(S3C2410_INTMSK);
+
+	submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
+
+	/* check to see if we need to mask the parent IRQ */
+
+	if ((submask  & subcheck) == subcheck) {
+		__raw_writel(mask | parentbit, S3C2410_INTMSK);
+	}
+
+	/* write back masks */
+	__raw_writel(submask, S3C2410_INTSUBMSK);
+
+}
+
+static inline void
+s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
+{
+	unsigned long mask;
+	unsigned long submask;
+
+	submask = __raw_readl(S3C2410_INTSUBMSK);
+	mask = __raw_readl(S3C2410_INTMSK);
+
+	submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
+	mask &= ~parentbit;
+
+	/* write back masks */
+	__raw_writel(submask, S3C2410_INTSUBMSK);
+	__raw_writel(mask, S3C2410_INTMSK);
+}
+
+
+static inline void
+s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int group)
+{
+	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
+
+	s3c_irqsub_mask(irqno, parentmask, group);
+
+	__raw_writel(bit, S3C2410_SUBSRCPND);
+
+	/* only ack parent if we've got all the irqs (seems we must
+	 * ack, all and hope that the irq system retriggers ok when
+	 * the interrupt goes off again)
+	 */
+
+	if (1) {
+		__raw_writel(parentmask, S3C2410_SRCPND);
+		__raw_writel(parentmask, S3C2410_INTPND);
+	}
+}
+
+static inline void
+s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group)
+{
+	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
+
+	__raw_writel(bit, S3C2410_SUBSRCPND);
+
+	/* only ack parent if we've got all the irqs (seems we must
+	 * ack, all and hope that the irq system retriggers ok when
+	 * the interrupt goes off again)
+	 */
+
+	if (1) {
+		__raw_writel(parentmask, S3C2410_SRCPND);
+		__raw_writel(parentmask, S3C2410_INTPND);
+	}
+}
+
+/* exported for use in arch/arm/mach-s3c2410 */
+
+#ifdef CONFIG_PM
+extern int s3c_irq_wake(unsigned int irqno, unsigned int state);
+#else
+#define s3c_irq_wake NULL
+#endif
+
+extern int s3c_irqext_type(unsigned int irq, unsigned int type);
diff --git a/include/asm-arm/plat-s3c24xx/pm.h b/include/asm-arm/plat-s3c24xx/pm.h
new file mode 100644
index 0000000..cc62366
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/pm.h
@@ -0,0 +1,73 @@
+/* linux/include/asm-arm/plat-s3c24xx/pm.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Written by Ben Dooks, <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* s3c2410_pm_init
+ *
+ * called from board at initialisation time to setup the power
+ * management
+*/
+
+#ifdef CONFIG_PM
+
+extern __init int s3c2410_pm_init(void);
+
+#else
+
+static inline int s3c2410_pm_init(void)
+{
+	return 0;
+}
+#endif
+
+/* configuration for the IRQ mask over sleep */
+extern unsigned long s3c_irqwake_intmask;
+extern unsigned long s3c_irqwake_eintmask;
+
+/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */
+extern unsigned long s3c_irqwake_intallow;
+extern unsigned long s3c_irqwake_eintallow;
+
+/* per-cpu sleep functions */
+
+extern void (*pm_cpu_prep)(void);
+extern void (*pm_cpu_sleep)(void);
+
+/* Flags for PM Control */
+
+extern unsigned long s3c_pm_flags;
+
+/* from sleep.S */
+
+extern int  s3c2410_cpu_save(unsigned long *saveblk);
+extern void s3c2410_cpu_suspend(void);
+extern void s3c2410_cpu_resume(void);
+
+extern unsigned long s3c2410_sleep_save_phys;
+
+/* sleep save info */
+
+struct sleep_save {
+	void __iomem	*reg;
+	unsigned long	val;
+};
+
+#define SAVE_ITEM(x) \
+	{ .reg = (x) }
+
+extern void s3c2410_pm_do_save(struct sleep_save *ptr, int count);
+extern void s3c2410_pm_do_restore(struct sleep_save *ptr, int count);
+
+#ifdef CONFIG_PM
+extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state);
+extern int s3c24xx_irq_resume(struct sys_device *dev);
+#else
+#define s3c24xx_irq_suspend NULL
+#define s3c24xx_irq_resume  NULL
+#endif
diff --git a/include/asm-arm/plat-s3c24xx/s3c2400.h b/include/asm-arm/plat-s3c24xx/s3c2400.h
new file mode 100644
index 0000000..3a5a168
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/s3c2400.h
@@ -0,0 +1,31 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2400.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C2400 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ *     09-Fev-2006 LCVR  First version, based on s3c2410.h
+*/
+
+#ifdef CONFIG_CPU_S3C2400
+
+extern  int s3c2400_init(void);
+
+extern void s3c2400_map_io(struct map_desc *mach_desc, int size);
+
+extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2400_init_clocks(int xtal);
+
+#else
+#define s3c2400_init_clocks NULL
+#define s3c2400_init_uarts NULL
+#define s3c2400_map_io NULL
+#define s3c2400_init NULL
+#endif
diff --git a/include/asm-arm/plat-s3c24xx/s3c2410.h b/include/asm-arm/plat-s3c24xx/s3c2410.h
new file mode 100644
index 0000000..36de0b8
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/s3c2410.h
@@ -0,0 +1,31 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2410.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2410 machine directory
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#ifdef CONFIG_CPU_S3C2410
+
+extern  int s3c2410_init(void);
+
+extern void s3c2410_map_io(struct map_desc *mach_desc, int size);
+
+extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2410_init_clocks(int xtal);
+
+extern  int s3c2410_baseclk_add(void);
+
+#else
+#define s3c2410_init_clocks NULL
+#define s3c2410_init_uarts NULL
+#define s3c2410_map_io NULL
+#define s3c2410_init NULL
+#endif
diff --git a/include/asm-arm/plat-s3c24xx/s3c2412.h b/include/asm-arm/plat-s3c24xx/s3c2412.h
new file mode 100644
index 0000000..3ec9768
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/s3c2412.h
@@ -0,0 +1,29 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2412.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2412 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2412
+
+extern  int s3c2412_init(void);
+
+extern void s3c2412_map_io(struct map_desc *mach_desc, int size);
+
+extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2412_init_clocks(int xtal);
+
+extern  int s3c2412_baseclk_add(void);
+#else
+#define s3c2412_init_clocks NULL
+#define s3c2412_init_uarts NULL
+#define s3c2412_map_io NULL
+#define s3c2412_init NULL
+#endif
diff --git a/include/asm-arm/plat-s3c24xx/s3c2440.h b/include/asm-arm/plat-s3c24xx/s3c2440.h
new file mode 100644
index 0000000..107853b
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/s3c2440.h
@@ -0,0 +1,17 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2440.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2440 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2440
+extern  int s3c2440_init(void);
+#else
+#define s3c2440_init NULL
+#endif
diff --git a/include/asm-arm/plat-s3c24xx/s3c2442.h b/include/asm-arm/plat-s3c24xx/s3c2442.h
new file mode 100644
index 0000000..451a23a
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/s3c2442.h
@@ -0,0 +1,17 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2442.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2442 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2442
+extern  int s3c2442_init(void);
+#else
+#define s3c2442_init NULL
+#endif
-- 
cgit v1.1


From 1b8fc1880cf36bd1f3df932601a6745bb164acc4 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sun, 11 Feb 2007 18:56:03 +0100
Subject: [ARM] 4159/1: S3C2410: fix compile of
 arch/arm/mach-s3c2410/mach-aml5900.c

Fix compile of arch/arm/mach-s3c2410/mach-aml5900.c due to missing
fixes that have been applied to the rest of the tree.

Include <linux/serial_core.h> to provide the upf_t type needed for
the serial code, and remove the old static map of the SPI which is
not needed for the new spi drivers.

mach-amlm5900.c:51: include/asm/arch/regs-serial.h:200: error: parse error befo
re "upf_t"
mach-amlm5900.c:117: error: 'S3C24XX_VA_SPI' undeclared here (not in a function)

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-s3c2410/mach-amlm5900.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index d54cda1..72f2cc4 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -35,7 +35,7 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/proc_fs.h>
-
+#include <linux/serial_core.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -113,12 +113,6 @@ static struct platform_device amlm5900_device_nor = {
 #endif
 
 static struct map_desc amlm5900_iodesc[] __initdata = {
-	{
-		.virtual	= (u32)S3C24XX_VA_SPI,
-		.pfn		= __phys_to_pfn(S3C2410_PA_SPI),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE
-	}
 };
 
 #define UCON S3C2410_UCON_DEFAULT
-- 
cgit v1.1


From 90ac7648e0bcbf84a33aed5b15ae6894fda92779 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sun, 11 Feb 2007 18:58:58 +0100
Subject: [ARM] 4160/1: S3C24XX: defconfig update for 2.6.20

Update defconfig for the 2.6.20 release, and ensure that the
AML5900 machine is built.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/s3c2410_defconfig | 57 ++++++++++++++++++++++++++------------
 1 file changed, 40 insertions(+), 17 deletions(-)

diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 3b31a33..dd685f9 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc4
-# Fri Nov  3 17:41:31 2006
+# Linux kernel version: 2.6.20
+# Sun Feb 11 17:46:02 2007
 #
 CONFIG_ARM=y
 # CONFIG_GENERIC_TIME is not set
@@ -11,6 +11,8 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_VECTORS_BASE=0xffff0000
@@ -37,13 +39,14 @@ CONFIG_SYSVIPC=y
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -76,7 +79,9 @@ CONFIG_KMOD=y
 # Block layer
 #
 CONFIG_BLOCK=y
+# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -110,6 +115,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
@@ -126,11 +132,12 @@ CONFIG_ARCH_S3C2410=y
 #
 # S3C24XX Implementations
 #
-# CONFIG_MACH_AML_M5900 is not set
+CONFIG_MACH_AML_M5900=y
 CONFIG_MACH_ANUBIS=y
 CONFIG_MACH_OSIRIS=y
 CONFIG_ARCH_BAST=y
 CONFIG_BAST_PC104_IRQ=y
+CONFIG_PM_H1940=y
 CONFIG_ARCH_H1940=y
 CONFIG_MACH_N30=y
 CONFIG_MACH_SMDK=y
@@ -303,6 +310,7 @@ CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -385,6 +393,7 @@ CONFIG_MTD_CMDLINE_PARTS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
@@ -531,6 +540,11 @@ CONFIG_BLK_DEV_IDE_BAST=y
 # CONFIG_SCSI_NETLINK is not set
 
 #
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
 # Multi-device support (RAID and LVM)
 #
 # CONFIG_MD is not set
@@ -682,7 +696,7 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
+# CONFIG_MOXA_SMARTIO_NEW is not set
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_RISCOM8 is not set
@@ -700,13 +714,14 @@ CONFIG_SERIAL_8250_NR_UARTS=8
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
 # CONFIG_SERIAL_8250_FOURPORT is not set
 # CONFIG_SERIAL_8250_ACCENT is not set
 # CONFIG_SERIAL_8250_BOCA is not set
+# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
 # CONFIG_SERIAL_8250_HUB6 is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
 
 #
 # Non-8250 serial port support
@@ -755,10 +770,6 @@ CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
 
 #
@@ -863,6 +874,7 @@ CONFIG_SENSORS_LM85=m
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
@@ -870,6 +882,7 @@ CONFIG_SENSORS_LM85=m
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
@@ -952,6 +965,11 @@ CONFIG_FONT_8x16=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1028,6 +1046,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
@@ -1179,9 +1198,6 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_JFFS_FS=y
-CONFIG_JFFS_FS_VERBOSE=0
-# CONFIG_JFFS_PROC_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -1285,6 +1301,11 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_UTF8 is not set
 
 #
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -1296,6 +1317,8 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_DETECT_SOFTLOCKUP=y
@@ -1311,12 +1334,10 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_FORCED_INLINING=y
-# CONFIG_HEADERS_CHECK is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_ERRORS is not set
@@ -1339,6 +1360,7 @@ CONFIG_DEBUG_S3C2410_UART=0
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
@@ -1346,3 +1368,4 @@ CONFIG_CRC32=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
-- 
cgit v1.1


From b887060532b98d8c0f3a1c3169f06f55bb196bd8 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sun, 11 Feb 2007 20:33:13 +0100
Subject: [ARM] 4161/1: S3C24XX: fix leakage of plat-s3c24xx Kconfig items

Do not export S3C24XX from plat-s3c24xx on non-s3c24xx systems

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/plat-s3c24xx/Kconfig | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 9781364..e223431 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -7,10 +7,12 @@
 config PLAT_S3C24XX
 	bool
 	depends on ARCH_S3C2410
-	default y
+	default y if ARCH_S3C2410
 	help
 	  Base platform code for any Samsung S3C device
 
+if PLAT_S3C24XX
+
 config CPU_S3C244X
 	bool
 	depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
@@ -94,3 +96,4 @@ config MACH_SMDK
 	help
 	  Common machine code for SMDK2410 and SMDK2440
 
+endif
-- 
cgit v1.1


From 72922bac1050f00fcd1dc3412fcfe71f8190f9c6 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Mon, 12 Feb 2007 14:38:26 +0100
Subject: [ARM] 4162/1: S3C24XX: update defconfig_s3c2410 after move

Update the s3c2410_defconfig after the movement of
arch/arm/mach-s3c2410

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/s3c2410_defconfig | 85 ++++++++++++++++++++++----------------
 1 file changed, 49 insertions(+), 36 deletions(-)

diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index dd685f9..e8f9375 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.20
-# Sun Feb 11 17:46:02 2007
+# Mon Feb 12 13:32:08 2007
 #
 CONFIG_ARM=y
 # CONFIG_GENERIC_TIME is not set
@@ -128,55 +128,67 @@ CONFIG_ARCH_S3C2410=y
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
+CONFIG_PLAT_S3C24XX=y
+CONFIG_CPU_S3C244X=y
+CONFIG_PM_SIMTEC=y
+# CONFIG_S3C2410_BOOT_WATCHDOG is not set
+# CONFIG_S3C2410_BOOT_ERROR_RESET is not set
+# CONFIG_S3C2410_PM_DEBUG is not set
+# CONFIG_S3C2410_PM_CHECK is not set
+CONFIG_S3C2410_LOWLEVEL_UART_PORT=0
+CONFIG_S3C2410_DMA=y
+# CONFIG_S3C2410_DMA_DEBUG is not set
+CONFIG_MACH_SMDK=y
 
 #
-# S3C24XX Implementations
+# S3C2400 Machines
 #
-CONFIG_MACH_AML_M5900=y
-CONFIG_MACH_ANUBIS=y
-CONFIG_MACH_OSIRIS=y
-CONFIG_ARCH_BAST=y
-CONFIG_BAST_PC104_IRQ=y
-CONFIG_PM_H1940=y
+CONFIG_CPU_S3C2410=y
+CONFIG_CPU_S3C2410_DMA=y
+CONFIG_S3C2410_PM=y
+CONFIG_S3C2410_GPIO=y
+CONFIG_S3C2410_CLOCK=y
+
+#
+# S3C2410 Machines
+#
+CONFIG_ARCH_SMDK2410=y
 CONFIG_ARCH_H1940=y
+CONFIG_PM_H1940=y
 CONFIG_MACH_N30=y
-CONFIG_MACH_SMDK=y
-CONFIG_ARCH_SMDK2410=y
-CONFIG_ARCH_S3C2440=y
-CONFIG_SMDK2440_CPU2440=y
-CONFIG_SMDK2440_CPU2442=y
-CONFIG_MACH_S3C2413=y
-CONFIG_MACH_SMDK2413=y
-CONFIG_MACH_VR1000=y
-CONFIG_MACH_RX3715=y
+CONFIG_ARCH_BAST=y
 CONFIG_MACH_OTOM=y
-CONFIG_MACH_NEXCODER_2440=y
-CONFIG_MACH_VSTMS=y
-CONFIG_S3C2410_CLOCK=y
-CONFIG_S3C2410_PM=y
-CONFIG_CPU_S3C2410_DMA=y
-CONFIG_CPU_S3C2410=y
-CONFIG_S3C2412_PM=y
+CONFIG_MACH_AML_M5900=y
+CONFIG_BAST_PC104_IRQ=y
+CONFIG_MACH_VR1000=y
 CONFIG_CPU_S3C2412=y
-CONFIG_CPU_S3C244X=y
+CONFIG_S3C2412_DMA=y
+CONFIG_S3C2412_PM=y
+
+#
+# S3C2412 Machines
+#
+CONFIG_MACH_SMDK2413=y
+CONFIG_MACH_S3C2413=y
+CONFIG_MACH_VSTMS=y
 CONFIG_CPU_S3C2440=y
-CONFIG_CPU_S3C2442=y
+CONFIG_S3C2440_DMA=y
 
 #
-# S3C2410 Boot
+# S3C2440 Machines
 #
-# CONFIG_S3C2410_BOOT_WATCHDOG is not set
-# CONFIG_S3C2410_BOOT_ERROR_RESET is not set
+CONFIG_MACH_ANUBIS=y
+CONFIG_MACH_OSIRIS=y
+CONFIG_MACH_RX3715=y
+CONFIG_ARCH_S3C2440=y
+CONFIG_MACH_NEXCODER_2440=y
+CONFIG_SMDK2440_CPU2440=y
+CONFIG_CPU_S3C2442=y
 
 #
-# S3C2410 Setup
+# S3C2442 Machines
 #
-CONFIG_S3C2410_DMA=y
-# CONFIG_S3C2410_DMA_DEBUG is not set
-# CONFIG_S3C2410_PM_DEBUG is not set
-# CONFIG_S3C2410_PM_CHECK is not set
-CONFIG_PM_SIMTEC=y
-CONFIG_S3C2410_LOWLEVEL_UART_PORT=0
+CONFIG_SMDK2440_CPU2442=y
 
 #
 # Processor Type
@@ -203,6 +215,7 @@ CONFIG_CPU_CP15_MMU=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
 
 #
 # Bus support
-- 
cgit v1.1


From 6db3eee422f80b9d440ea4c08280b52ac4bfa903 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Mon, 12 Feb 2007 16:03:22 +0100
Subject: [ARM] 4163/1: S3C2410: minor typo in init comment

Fix a reference to s3c2440 in the s3c2410 cpu file

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-s3c2410/s3c2410.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index d96fdcf..1a86a98 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -110,7 +110,7 @@ static struct sys_device s3c2410_sysdev = {
 
 /* need to register class before we actually register the device, and
  * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2440 based system)
+ * drivers even try to use it (even if not on an s3c2410 based system)
  * as a driver which may support both 2410 and 2440 may try and use it.
 */
 
-- 
cgit v1.1


From 6fb9c4f87018f90d7aa415c5c8a4b22e6a000c5b Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Mon, 12 Feb 2007 18:57:05 +0100
Subject: [ARM] 4164/1: S3C2412: Add SMDK2412 to SMDK2413

Our current support for the SMDK2413 is the same
as the SMDK2412 (which is very similar), so add
SMDK2412 to the list of machines that mach-smdk2413.c
supports

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-s3c2412/mach-smdk2413.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 32b1561..e385069 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -126,6 +126,19 @@ MACHINE_START(S3C2413, "S3C2413")
 	.timer		= &s3c24xx_timer,
 MACHINE_END
 
+MACHINE_START(SMDK2412, "SMDK2412")
+	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+
+	.fixup		= smdk2413_fixup,
+	.init_irq	= s3c24xx_init_irq,
+	.map_io		= smdk2413_map_io,
+	.init_machine	= smdk2413_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
+
 MACHINE_START(SMDK2413, "SMDK2413")
 	/* Maintainer: Ben Dooks <ben@fluff.org> */
 	.phys_io	= S3C2410_PA_UART,
-- 
cgit v1.1


From 4b210faf0944172e55489bef83babf520bccc1c4 Mon Sep 17 00:00:00 2001
From: Matt Reimer <mreimer@vpop.net>
Date: Mon, 12 Feb 2007 21:00:32 +0100
Subject: [ARM] 4169/1: S3C2410: align to a cache line

Align the code to the start of the next cache line, rather than the start of the next 256-byte page.

(On i386 and ARM, the ".align" assembler directive takes its first argument as the number of low-order bits that must be zero, not the number of words comprising a cache line.)

Supercedes patch 4166.

Signed-off-by: Matt Reimer <mreimer@vpop.net>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-s3c2410/sleep.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S
index 9179a10..637aaba 100644
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -59,7 +59,7 @@ ENTRY(s3c2410_cpu_suspend)
 	b	s3c2410_do_sleep	@
 
 	@@ align next bit of code to cache line
-	.align	8
+	.align	5
 s3c2410_do_sleep:
 	streq	r7, [ r4 ]			@ SDRAM sleep command
 	streq	r8, [ r5 ]			@ SDRAM power-down config
-- 
cgit v1.1


From 07b04595e3630594773223874827f5bbd03fc289 Mon Sep 17 00:00:00 2001
From: Matt Reimer <mreimer@vpop.net>
Date: Mon, 12 Feb 2007 21:05:02 +0100
Subject: [ARM] 4170/1: S3C2410: don't save and restore cp register 15

Don't save and restore cp register 15 since it is only a test register on S3C2410. This is probably a leftover from the PXA sleep.S from which this was derived.

Supersedes patch 4167.

Signed-off-by: Matt Reimer <mreimer@vpop.net>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/plat-s3c24xx/sleep.S | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S
index 2018c2e..435349d 100644
--- a/arch/arm/plat-s3c24xx/sleep.S
+++ b/arch/arm/plat-s3c24xx/sleep.S
@@ -64,11 +64,10 @@ ENTRY(s3c2410_cpu_save)
 
 	@@ store co-processor registers
 
-	mrc	p15, 0, r4, c15, c1, 0	@ CP access register
-	mrc	p15, 0, r5, c13, c0, 0	@ PID
-	mrc	p15, 0, r6, c3, c0, 0	@ Domain ID
-	mrc	p15, 0, r7, c2, c0, 0	@ translation table base address
-	mrc	p15, 0, r8, c1, c0, 0	@ control register
+	mrc	p15, 0, r4, c13, c0, 0	@ PID
+	mrc	p15, 0, r5, c3, c0, 0	@ Domain ID
+	mrc	p15, 0, r6, c2, c0, 0	@ translation table base address
+	mrc	p15, 0, r7, c1, c0, 0	@ control register
 
 	stmia	r0, { r4 - r13 }
 
@@ -141,10 +140,9 @@ ENTRY(s3c2410_cpu_resume)
 	ldr	r0, s3c2410_sleep_save_phys	@ address of restore block
 	ldmia	r0, { r4 - r13 }
 
-	mcr	p15, 0, r4, c15, c1, 0		@ CP access register
-	mcr	p15, 0, r5, c13, c0, 0		@ PID
-	mcr	p15, 0, r6, c3, c0, 0		@ Domain ID
-	mcr	p15, 0, r7, c2, c0, 0		@ translation table base
+	mcr	p15, 0, r4, c13, c0, 0		@ PID
+	mcr	p15, 0, r5, c3, c0, 0		@ Domain ID
+	mcr	p15, 0, r6, c2, c0, 0		@ translation table base
 
 #ifdef CONFIG_DEBUG_RESUME
 	mov	r3, #'R'
@@ -152,7 +150,7 @@ ENTRY(s3c2410_cpu_resume)
 #endif
 
 	ldr	r2, =resume_with_mmu
-	mcr	p15, 0, r8, c1, c0, 0		@ turn on MMU, etc
+	mcr	p15, 0, r7, c1, c0, 0		@ turn on MMU, etc
 	nop					@ second-to-last before mmu
 	mov	pc, r2				@ go back to virtual address
 
-- 
cgit v1.1


From b05f87172f904b28bd5ac058ebfb4e216b843efe Mon Sep 17 00:00:00 2001
From: Matt Reimer <mreimer@vpop.net>
Date: Mon, 12 Feb 2007 20:42:52 +0100
Subject: [ARM] 4168/1: S3C24XX: use defines instead of numbers

Use defines instead of numbers.

Signed-off-by: Matt Reimer <mreimer@vpop.net>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-s3c2410/system.h | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h
index ecf250d..41aeb73 100644
--- a/include/asm-arm/arch-s3c2410/system.h
+++ b/include/asm-arm/arch-s3c2410/system.h
@@ -23,7 +23,6 @@ void (*s3c24xx_idle)(void);
 
 void s3c24xx_default_idle(void)
 {
-	void __iomem *reg = S3C2410_CLKCON;
 	unsigned long tmp;
 	int i;
 
@@ -33,16 +32,18 @@ void s3c24xx_default_idle(void)
 
 	/* Warning: going into idle state upsets jtag scanning */
 
-	__raw_writel(__raw_readl(reg) | (1<<2), reg);
+	__raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
+		     S3C2410_CLKCON);
 
 	/* the samsung port seems to do a loop and then unset idle.. */
 	for (i = 0; i < 50; i++) {
-		tmp += __raw_readl(reg); /* ensure loop not optimised out */
+		tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
 	}
 
 	/* this bit is not cleared on re-start... */
 
-	__raw_writel(__raw_readl(reg) & ~(1<<2), reg);
+	__raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
+		     S3C2410_CLKCON);
 }
 
 static void arch_idle(void)
-- 
cgit v1.1


From 0dcfc328ccd1d475f10a33c0ccf10bda869d4a83 Mon Sep 17 00:00:00 2001
From: Arnaud Patard <arnaud.patard@rtp-net.org>
Date: Tue, 13 Feb 2007 00:18:33 +0100
Subject: [ARM] 4173/1: S3C24XX usb device platform datas

This patch is adding the functions and structures used for handling the
S3C24XX udc driver platform datas.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/plat-s3c24xx/devs.c       | 15 +++++++++++++++
 include/asm-arm/arch-s3c2410/udc.h | 34 ++++++++++++++++++++++++++++++++++
 2 files changed, 49 insertions(+)
 create mode 100644 include/asm-arm/arch-s3c2410/udc.h

diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 6d46c4e..0fe53b3 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -29,6 +29,7 @@
 #include <asm/irq.h>
 
 #include <asm/arch/regs-serial.h>
+#include <asm/arch/udc.h>
 
 #include <asm/plat-s3c24xx/devs.h>
 #include <asm/plat-s3c24xx/cpu.h>
@@ -230,6 +231,20 @@ struct platform_device s3c_device_usbgadget = {
 
 EXPORT_SYMBOL(s3c_device_usbgadget);
 
+void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd)
+{
+	struct s3c2410_udc_mach_info *npd;
+
+	npd = kmalloc(sizeof(*npd), GFP_KERNEL);
+	if (npd) {
+		memcpy(npd, pd, sizeof(*npd));
+		s3c_device_usbgadget.dev.platform_data = npd;
+	} else {
+		printk(KERN_ERR "no memory for udc platform data\n");
+	}
+}
+
+
 /* Watchdog */
 
 static struct resource s3c_wdt_resource[] = {
diff --git a/include/asm-arm/arch-s3c2410/udc.h b/include/asm-arm/arch-s3c2410/udc.h
new file mode 100644
index 0000000..2529eff
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/udc.h
@@ -0,0 +1,34 @@
+/* linux/include/asm/arch-s3c2410/udc.h
+ *
+ * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ *  Changelog:
+ *	14-Mar-2005	RTP	Created file
+ *	02-Aug-2005	RTP	File rename
+ *	07-Sep-2005	BJD	Minor cleanups, changed cmd to enum
+*/
+
+#ifndef __ASM_ARM_ARCH_UDC_H
+#define __ASM_ARM_ARCH_UDC_H
+
+enum s3c2410_udc_cmd_e {
+	S3C2410_UDC_P_ENABLE	= 1,	/* Pull-up enable        */
+	S3C2410_UDC_P_DISABLE	= 2,	/* Pull-up disable       */
+	S3C2410_UDC_P_RESET	= 3,	/* UDC reset, in case of */
+};
+
+struct s3c2410_udc_mach_info {
+	void	(*udc_command)(enum s3c2410_udc_cmd_e);
+	unsigned int vbus_pin;
+	unsigned char vbus_pin_inverted;
+};
+
+extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *);
+
+#endif /* __ASM_ARM_ARCH_UDC_H */
-- 
cgit v1.1


From 71a9c4241278c8104ff30233b9247c0857c404d7 Mon Sep 17 00:00:00 2001
From: Arnaud Patard <arnaud.patard@rtp-net.org>
Date: Tue, 13 Feb 2007 00:21:26 +0100
Subject: [ARM] 4174/1: H1940 usb device definitions

This patch is adding the usb device controller to the h1940 device
list. It's also adding the code to handle the usb pull-ups.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-s3c2410/mach-h1940.c | 48 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 47 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 5af26e1..68f11ef 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -33,10 +33,13 @@
 
 #include <asm/arch/regs-serial.h>
 #include <asm/arch/regs-lcd.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-clock.h>
 
 #include <asm/arch/h1940.h>
 #include <asm/arch/h1940-latch.h>
 #include <asm/arch/fb.h>
+#include <asm/arch/udc.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/devs.h>
@@ -102,6 +105,32 @@ void h1940_latch_control(unsigned int clear, unsigned int set)
 
 EXPORT_SYMBOL_GPL(h1940_latch_control);
 
+static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
+{
+	printk(KERN_DEBUG "udc: pullup(%d)\n",cmd);
+
+	switch (cmd)
+	{
+		case S3C2410_UDC_P_ENABLE :
+			h1940_latch_control(0, H1940_LATCH_USB_DP);
+			break;
+		case S3C2410_UDC_P_DISABLE :
+			h1940_latch_control(H1940_LATCH_USB_DP, 0);
+			break;
+		case S3C2410_UDC_P_RESET :
+			break;
+		default:
+			break;
+	}
+}
+
+static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
+	.udc_command		= h1940_udc_pullup,
+	.vbus_pin		= S3C2410_GPG5,
+	.vbus_pin_inverted	= 1,
+};
+
+
 
 /**
  * Set lcd on or off
@@ -152,6 +181,7 @@ static struct platform_device *h1940_devices[] __initdata = {
 	&s3c_device_wdt,
 	&s3c_device_i2c,
 	&s3c_device_iis,
+	&s3c_device_usbgadget,
 };
 
 static struct s3c24xx_board h1940_board __initdata = {
@@ -179,7 +209,23 @@ static void __init h1940_init_irq(void)
 
 static void __init h1940_init(void)
 {
+	u32 tmp;
+
 	s3c24xx_fb_set_platdata(&h1940_lcdcfg);
+ 	s3c24xx_udc_set_platdata(&h1940_udc_cfg);
+
+	/* Turn off suspend on both USB ports, and switch the
+	 * selectable USB port to USB device mode. */
+
+	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+			      S3C2410_MISCCR_USBSUSPND0 |
+			      S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+	tmp = (
+		 0x78 << S3C2410_PLLCON_MDIVSHIFT)
+	      | (0x02 << S3C2410_PLLCON_PDIVSHIFT)
+	      | (0x03 << S3C2410_PLLCON_SDIVSHIFT);
+	writel(tmp, S3C2410_UPLLCON);
 }
 
 MACHINE_START(H1940, "IPAQ-H1940")
@@ -189,6 +235,6 @@ MACHINE_START(H1940, "IPAQ-H1940")
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= h1940_map_io,
 	.init_irq	= h1940_init_irq,
-	.init_machine   = h1940_init,
+	.init_machine	= h1940_init,
 	.timer		= &s3c24xx_timer,
 MACHINE_END
-- 
cgit v1.1


From ecd1b171a76bb73196dbce4da9f64a4a0a9d098f Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 13 Feb 2007 00:39:08 +0100
Subject: [ARM] 4175/1: SMDK2413: add udc pull-up control

USB gadget pull-up control and device addition
for the SMDK2413/SMDK2412 board.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-s3c2412/mach-smdk2413.c | 41 ++++++++++++++++++++++++++++++++++-
 1 file changed, 40 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index e385069..b5befce 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -37,6 +37,7 @@
 #include <asm/arch/regs-lcd.h>
 
 #include <asm/arch/idle.h>
+#include <asm/arch/udc.h>
 #include <asm/arch/fb.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
@@ -75,12 +76,38 @@ static struct s3c2410_uartcfg smdk2413_uartcfgs[] __initdata = {
 	}
 };
 
+static void smdk2413_udc_pullup(enum s3c2410_udc_cmd_e cmd)
+{
+	printk(KERN_DEBUG "udc: pullup(%d)\n",cmd);
+
+	switch (cmd)
+	{
+		case S3C2410_UDC_P_ENABLE :
+			s3c2410_gpio_setpin(S3C2410_GPF2, 1);
+			break;
+		case S3C2410_UDC_P_DISABLE :
+			s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+			break;
+		case S3C2410_UDC_P_RESET :
+			break;
+		default:
+			break;
+	}
+}
+
+
+static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = {
+	.udc_command		= smdk2413_udc_pullup,
+};
+
+
 static struct platform_device *smdk2413_devices[] __initdata = {
 	&s3c_device_usb,
 	//&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c,
 	&s3c_device_iis,
+	&s3c_device_usbgadget,
 };
 
 static struct s3c24xx_board smdk2413_board __initdata = {
@@ -109,7 +136,19 @@ static void __init smdk2413_map_io(void)
 }
 
 static void __init smdk2413_machine_init(void)
-{
+{	/* Turn off suspend on both USB ports, and switch the
+	 * selectable USB port to USB device mode. */
+
+	s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPIO_OUTPUT);
+
+	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+			      S3C2410_MISCCR_USBSUSPND0 |
+			      S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+
+ 	s3c24xx_udc_set_platdata(&smdk2413_udc_cfg);
+
 	smdk_machine_init();
 }
 
-- 
cgit v1.1


From d2a76020e3a52c6370a7d603082b4cdb3db0703e Mon Sep 17 00:00:00 2001
From: Arnaud Patard <arnaud.patard@rtp-net.org>
Date: Tue, 13 Feb 2007 00:50:34 +0100
Subject: [ARM] 4176/1: H1940 leds

H1940 leds device addition.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-s3c2410/mach-h1940.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 68f11ef..2b495b7 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -175,6 +175,11 @@ static struct s3c2410fb_mach_info h1940_lcdcfg __initdata = {
 	.bpp=		{16,16,16},
 };
 
+static struct platform_device s3c_device_leds = {
+	.name             = "h1940-leds",
+	.id               = -1,
+};
+
 static struct platform_device *h1940_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
@@ -182,6 +187,7 @@ static struct platform_device *h1940_devices[] __initdata = {
 	&s3c_device_i2c,
 	&s3c_device_iis,
 	&s3c_device_usbgadget,
+	&s3c_device_leds,
 };
 
 static struct s3c24xx_board h1940_board __initdata = {
-- 
cgit v1.1


From 0c6022d453ecebdace0ce15434c7108e158149ca Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 13 Feb 2007 13:02:52 +0100
Subject: [ARM] 4177/1: S3C24XX: Add DMA channel allocation order

Allow the CPU code, and any board specific initialisation
code to change the allocation order of the DMA channels,
or stop a peripheral allocating any DMA at-all.

This is due to the scarce mapping of DMA channels on
some earlier S3C24XX cpus, where the selection changes
depending on the channel in use.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 Documentation/arm/Samsung-S3C24XX/DMA.txt | 46 +++++++++++++++++++++++++++++
 arch/arm/plat-s3c24xx/dma.c               | 49 +++++++++++++++++++++++++++++--
 include/asm-arm/plat-s3c24xx/dma.h        | 25 ++++++++++++++++
 3 files changed, 117 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/arm/Samsung-S3C24XX/DMA.txt

diff --git a/Documentation/arm/Samsung-S3C24XX/DMA.txt b/Documentation/arm/Samsung-S3C24XX/DMA.txt
new file mode 100644
index 0000000..37f4edc
--- /dev/null
+++ b/Documentation/arm/Samsung-S3C24XX/DMA.txt
@@ -0,0 +1,46 @@
+			S3C2410 DMA
+			===========
+
+Introduction
+------------
+
+   The kernel provides an interface to manage DMA transfers
+   using the DMA channels in the cpu, so that the central
+   duty of managing channel mappings, and programming the
+   channel generators is in one place.
+
+
+DMA Channel Ordering
+--------------------
+
+   Many of the range do not have connections for the DMA
+   channels to all sources, which means that some devices
+   have a restricted number of channels that can be used.
+
+   To allow flexibilty for each cpu type and board, the
+   dma code can be given an dma ordering structure which
+   allows the order of channel search to be specified, as
+   well as allowing the prohibition of certain claims.
+
+   struct s3c24xx_dma_order has a list of channels, and
+   each channel within has a slot for a list of dma
+   channel numbers. The slots are searched in order, for
+   the presence of a dma channel number with DMA_CH_VALID
+   orred in.
+
+   If the order has the flag DMA_CH_NEVER set, then after
+   checking the channel list, the system will return no
+   found channel, thus denying the request.
+
+   A board support file can call s3c24xx_dma_order_set()
+   to register an complete ordering set. The routine will
+   copy the data, so the original can be discared with
+   __initdata.
+
+
+Authour
+-------
+
+Ben Dooks,
+Copyright (c) 2007 Ben Dooks, Simtec Electronics
+Licensed under the GPL v2
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index c784e1f..44e3943 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -1354,18 +1354,22 @@ static inline int is_channel_valid(unsigned int channel)
 	return (channel & DMA_CH_VALID);
 }
 
+static struct s3c24xx_dma_order *dma_order;
+
+
 /* s3c2410_dma_map_channel()
  *
  * turn the virtual channel number into a real, and un-used hardware
  * channel.
  *
- * currently this code uses first-free channel from the specified harware
- * map, not taking into account anything that the board setup code may
- * have to say about the likely peripheral set to be in use.
+ * first, try the dma ordering given to us by either the relevant
+ * dma code, or the board. Then just find the first usable free
+ * channel
 */
 
 struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
 {
+	struct s3c24xx_dma_order_ch *ord = NULL;
 	struct s3c24xx_dma_map *ch_map;
 	struct s3c2410_dma_chan *dmach;
 	int ch;
@@ -1375,6 +1379,27 @@ struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
 
 	ch_map = dma_sel.map + channel;
 
+	/* first, try the board mapping */
+
+	if (dma_order) {
+		ord = &dma_order->channels[channel];
+
+		for (ch = 0; ch < S3C2410_DMA_CHANNELS; ch++) {
+			if (!is_channel_valid(ord->list[ch]))
+				continue;
+
+			if (s3c2410_chans[ord->list[ch]].in_use == 0) {
+				ch = ord->list[ch] & ~DMA_CH_VALID;
+				goto found;
+			}
+		}
+
+		if (ord->flags & DMA_CH_NEVER)
+			return NULL;
+	}
+
+	/* second, search the channel map for first free */
+
 	for (ch = 0; ch < S3C2410_DMA_CHANNELS; ch++) {
 		if (!is_channel_valid(ch_map->channels[ch]))
 			continue;
@@ -1390,6 +1415,7 @@ struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
 
 	/* update our channel mapping */
 
+ found:
 	dmach = &s3c2410_chans[ch];
 	dma_chan_map[channel] = dmach;
 
@@ -1439,3 +1465,20 @@ int __init s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel)
 
 	return 0;
 }
+
+int __init s3c24xx_dma_order_set(struct s3c24xx_dma_order *ord)
+{
+	struct s3c24xx_dma_order *nord = dma_order;
+
+	if (nord == NULL)
+		nord = kmalloc(sizeof(struct s3c24xx_dma_order), GFP_KERNEL);
+
+	if (nord == NULL) {
+		printk(KERN_ERR "no memory to store dma channel order\n");
+		return -ENOMEM;
+	}
+
+	dma_order = nord;
+	memcpy(nord, ord, sizeof(struct s3c24xx_dma_order));
+	return 0;
+}
diff --git a/include/asm-arm/plat-s3c24xx/dma.h b/include/asm-arm/plat-s3c24xx/dma.h
index 421b567..15e140c 100644
--- a/include/asm-arm/plat-s3c24xx/dma.h
+++ b/include/asm-arm/plat-s3c24xx/dma.h
@@ -14,6 +14,7 @@ extern struct sysdev_class dma_sysclass;
 extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
 
 #define DMA_CH_VALID		(1<<31)
+#define DMA_CH_NEVER		(1<<30)
 
 struct s3c24xx_dma_addr {
 	unsigned long		from;
@@ -43,3 +44,27 @@ struct s3c24xx_dma_selection {
 };
 
 extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
+
+/* struct s3c24xx_dma_order_ch
+ *
+ * channel map for one of the `enum dma_ch` dma channels. the list
+ * entry contains a set of low-level channel numbers, orred with
+ * DMA_CH_VALID, which are checked in the order in the array.
+*/
+
+struct s3c24xx_dma_order_ch {
+	unsigned int	list[S3C2410_DMA_CHANNELS];	/* list of channels */
+	unsigned int	flags;				/* flags */
+};
+
+/* struct s3c24xx_dma_order
+ *
+ * information provided by either the core or the board to give the
+ * dma system a hint on how to allocate channels
+*/
+
+struct s3c24xx_dma_order {
+	struct s3c24xx_dma_order_ch	channels[DMACH_MAX];
+};
+
+extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map);
-- 
cgit v1.1


From dad8d6c50e08ce2ef87f294fa412351b27d5bb97 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 13 Feb 2007 13:12:16 +0100
Subject: [ARM] 4178/1: S3C2410: DMA ordering list

Add DMA ordering list for S3C2410

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-s3c2410/dma.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 22c6136..6b34526 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -127,8 +127,27 @@ static struct s3c24xx_dma_selection __initdata s3c2410_dma_sel = {
 	.map_size	= ARRAY_SIZE(s3c2410_dma_mappings),
 };
 
+static struct s3c24xx_dma_order __initdata s3c2410_dma_order = {
+	.channels	= {
+		[DMACH_SDI]	= {
+			.list	= {
+				[0]	= 3 | DMA_CH_VALID,
+				[1]	= 2 | DMA_CH_VALID,
+				[2]	= 0 | DMA_CH_VALID,
+			},
+		},
+		[DMACH_I2S_IN]	= {
+			.list	= {
+				[0]	= 1 | DMA_CH_VALID,
+				[1]	= 2 | DMA_CH_VALID,
+			},
+		},
+	},
+};
+
 static int s3c2410_dma_add(struct sys_device *sysdev)
 {
+	s3c24xx_dma_order_set(&s3c2410_dma_order);
 	return s3c24xx_dma_init_map(&s3c2410_dma_sel);
 }
 
-- 
cgit v1.1


From bd65c82b9ee506950e1856e9af60be9fc627bfaa Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 13 Feb 2007 13:14:12 +0100
Subject: [ARM] 4179/1: S3C2440: DMA ordering list

Add DMA ordering list for S3C2440

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-s3c2440/dma.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index 8e51137..2bb2926 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -147,8 +147,52 @@ static struct s3c24xx_dma_selection __initdata s3c2440_dma_sel = {
 	.map_size	= ARRAY_SIZE(s3c2440_dma_mappings),
 };
 
+static struct s3c24xx_dma_order __initdata s3c2440_dma_order = {
+	.channels	= {
+		[DMACH_SDI]	= {
+			.list	= {
+				[0]	= 3 | DMA_CH_VALID,
+				[1]	= 2 | DMA_CH_VALID,
+				[2]	= 1 | DMA_CH_VALID,
+				[3]	= 0 | DMA_CH_VALID,
+			},
+		},
+		[DMACH_I2S_IN]	= {
+			.list	= {
+				[0]	= 1 | DMA_CH_VALID,
+				[1]	= 2 | DMA_CH_VALID,
+			},
+		},
+		[DMACH_I2S_OUT]	= {
+			.list	= {
+				[0]	= 2 | DMA_CH_VALID,
+				[1]	= 1 | DMA_CH_VALID,
+			},
+		},
+		[DMACH_PCM_IN] = {
+			.list	= {
+				[0]	= 2 | DMA_CH_VALID,
+				[1]	= 1 | DMA_CH_VALID,
+			},
+		},
+		[DMACH_PCM_OUT] = {
+			.list	= {
+				[0]	= 1 | DMA_CH_VALID,
+				[1]	= 3 | DMA_CH_VALID,
+			},
+		},
+		[DMACH_MIC_IN] = {
+			.list	= {
+				[0]	= 3 | DMA_CH_VALID,
+				[1]	= 2 | DMA_CH_VALID,
+			},
+		},
+	},
+};
+
 static int s3c2440_dma_add(struct sys_device *sysdev)
 {
+	s3c24xx_dma_order_set(&s3c2440_dma_order);
 	return s3c24xx_dma_init_map(&s3c2440_dma_sel);
 }
 
-- 
cgit v1.1


From 9e2ad159a9ba621c704c68703dcd86a4045a2523 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 13 Feb 2007 13:20:08 +0100
Subject: [ARM] 4180/1: S3C24XX: Update docs for S3C2412 and S3C2413

The S3C2412 and S3C2413 are supported, so document
this as so

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 Documentation/arm/Samsung-S3C24XX/Overview.txt | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt
index 28d0147..f423471 100644
--- a/Documentation/arm/Samsung-S3C24XX/Overview.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt
@@ -8,13 +8,10 @@ Introduction
 
   The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported
   by the 's3c2410' architecture of ARM Linux. Currently the S3C2410,
-  S3C2440 and S3C2442 devices are supported.
+  S3C2412, S3C2413, S3C2440 and S3C2442 devices are supported.
 
   Support for the S3C2400 series is in progress.
 
-  Support for the S3C2412 and S3C2413 CPUs is being merged.
-
-
 Configuration
 -------------
 
-- 
cgit v1.1


From 961314d37ea441673d12e0a57b2dab2eeac520a5 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 13 Feb 2007 13:29:46 +0100
Subject: [ARM] 4181/1: S3C24XX: Document new layout

Update Documentation/arm/Samsung-S3C24XX/Overview.txt
with the new directory layout.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 Documentation/arm/Samsung-S3C24XX/Overview.txt | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt
index f423471..c31b76f 100644
--- a/Documentation/arm/Samsung-S3C24XX/Overview.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt
@@ -23,6 +23,22 @@ Configuration
   please check the machine specific documentation.
 
 
+Layout
+------
+
+  The core support files are located in the platform code contained in
+  arch/arm/plat-s3c24xx with headers in include/asm-arm/plat-s3c24xx.
+  This directory should be kept to items shared between the platform
+  code (arch/arm/plat-s3c24xx) and the arch/arm/mach-s3c24* code.
+
+  Each cpu has a directory with the support files for it, and the
+  machines that carry the device. For example S3C2410 is contained
+  in arch/arm/mach-s3c2410 and S3C2440 in arch/arm/mach-s3c2440
+
+  Register, kernel and platform data definitions are held in the
+  include/asm-arm/arch-s3c2410 directory.
+
+
 Machines
 --------
 
-- 
cgit v1.1


From 5ac602b2eac4ee58e2497f44c39a5dd8385d2c87 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 13 Feb 2007 17:48:59 +0100
Subject: [ARM] 4188/1: S3C24XX: add CRAMFS to s3c2410_defconfig

Add cramfs support in by default, as a lot of
our initrds are cramfs images.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/s3c2410_defconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index e8f9375..7c8025b 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.20
-# Mon Feb 12 13:32:08 2007
+# Tue Feb 13 16:43:14 2007
 #
 CONFIG_ARM=y
 # CONFIG_GENERIC_TIME is not set
@@ -1220,7 +1220,7 @@ CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
+CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
-- 
cgit v1.1


From 69b2e99cf57ab8121d575a04a050314ac9c8f7e1 Mon Sep 17 00:00:00 2001
From: Andrew Victor <andrew@sanpeople.com>
Date: Wed, 14 Feb 2007 08:44:43 +0100
Subject: [ARM] 4189/1: AT91: MACB Ethernet clock

The MACB Ethernet driver searches for a "macb_clk" clock, so rename the
"ether_clk" on the SAM9260 and SAM9263 to "macb_clk".

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/at91sam9260.c | 6 +++---
 arch/arm/mach-at91/at91sam9263.c | 6 +++---
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index e03ee62..86e3a4c 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -127,8 +127,8 @@ static struct clk ohci_clk = {
 	.pmc_mask	= 1 << AT91SAM9260_ID_UHP,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
-static struct clk ether_clk = {
-	.name		= "ether_clk",
+static struct clk macb_clk = {
+	.name		= "macb_clk",
 	.pmc_mask	= 1 << AT91SAM9260_ID_EMAC,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
@@ -186,7 +186,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&tc1_clk,
 	&tc2_clk,
 	&ohci_clk,
-	&ether_clk,
+	&macb_clk,
 	&isi_clk,
 	&usart3_clk,
 	&usart4_clk,
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index fae6a82..6aa342e 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -107,8 +107,8 @@ static struct clk tcb_clk = {
 	.pmc_mask	= 1 << AT91SAM9263_ID_TCB,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
-static struct clk ether_clk = {
-	.name		= "ether_clk",
+static struct clk macb_clk = {
+	.name		= "macb_clk",
 	.pmc_mask	= 1 << AT91SAM9263_ID_EMAC,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
@@ -150,7 +150,7 @@ static struct clk *periph_clocks[] __initdata = {
 	// ac97
 	&tcb_clk,
 	// pwmc
-	&ether_clk,
+	&macb_clk,
 	// 2dge
 	&udc_clk,
 	&isi_clk,
-- 
cgit v1.1


From b3a1bde4db9889feb116330bff21214811c940e4 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Wed, 14 Feb 2007 19:14:56 +0100
Subject: [ARM] 4108/2:  Allow multiple GIC interrupt controllers in a system

The current implementation only assumes one GIC to be present in the
system. However, there are platforms with more than one cascaded interrupt
controllers (RealView/EB MPCore for example).

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/gic.c                | 109 ++++++++++++++++++++++++++++++-----
 arch/arm/mach-realview/platsmp.c     |   2 +-
 arch/arm/mach-realview/realview_eb.c |   4 +-
 include/asm-arm/hardware/gic.h       |   5 +-
 4 files changed, 101 insertions(+), 19 deletions(-)

diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 09b9d1b..4deece5 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -14,7 +14,9 @@
  *
  * o There is one CPU Interface per CPU, which sends interrupts sent
  *   by the Distributor, and interrupts generated locally, to the
- *   associated CPU.
+ *   associated CPU. The base address of the CPU interface is usually
+ *   aliased so that the same address points to different chips depending
+ *   on the CPU it is accessed from.
  *
  * Note that IRQs 0-31 are special - they are local to each CPU.
  * As such, the enable set/clear, pending set/clear and active bit
@@ -31,10 +33,38 @@
 #include <asm/mach/irq.h>
 #include <asm/hardware/gic.h>
 
-static void __iomem *gic_dist_base;
-static void __iomem *gic_cpu_base;
 static DEFINE_SPINLOCK(irq_controller_lock);
 
+struct gic_chip_data {
+	unsigned int irq_offset;
+	void __iomem *dist_base;
+	void __iomem *cpu_base;
+};
+
+#ifndef MAX_GIC_NR
+#define MAX_GIC_NR	1
+#endif
+
+static struct gic_chip_data gic_data[MAX_GIC_NR];
+
+static inline void __iomem *gic_dist_base(unsigned int irq)
+{
+	struct gic_chip_data *gic_data = get_irq_chip_data(irq);
+	return gic_data->dist_base;
+}
+
+static inline void __iomem *gic_cpu_base(unsigned int irq)
+{
+	struct gic_chip_data *gic_data = get_irq_chip_data(irq);
+	return gic_data->cpu_base;
+}
+
+static inline unsigned int gic_irq(unsigned int irq)
+{
+	struct gic_chip_data *gic_data = get_irq_chip_data(irq);
+	return irq - gic_data->irq_offset;
+}
+
 /*
  * Routines to acknowledge, disable and enable interrupts
  *
@@ -55,8 +85,8 @@ static void gic_ack_irq(unsigned int irq)
 	u32 mask = 1 << (irq % 32);
 
 	spin_lock(&irq_controller_lock);
-	writel(mask, gic_dist_base + GIC_DIST_ENABLE_CLEAR + (irq / 32) * 4);
-	writel(irq, gic_cpu_base + GIC_CPU_EOI);
+	writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_CLEAR + (gic_irq(irq) / 32) * 4);
+	writel(gic_irq(irq), gic_cpu_base(irq) + GIC_CPU_EOI);
 	spin_unlock(&irq_controller_lock);
 }
 
@@ -65,7 +95,7 @@ static void gic_mask_irq(unsigned int irq)
 	u32 mask = 1 << (irq % 32);
 
 	spin_lock(&irq_controller_lock);
-	writel(mask, gic_dist_base + GIC_DIST_ENABLE_CLEAR + (irq / 32) * 4);
+	writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_CLEAR + (gic_irq(irq) / 32) * 4);
 	spin_unlock(&irq_controller_lock);
 }
 
@@ -74,14 +104,14 @@ static void gic_unmask_irq(unsigned int irq)
 	u32 mask = 1 << (irq % 32);
 
 	spin_lock(&irq_controller_lock);
-	writel(mask, gic_dist_base + GIC_DIST_ENABLE_SET + (irq / 32) * 4);
+	writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_SET + (gic_irq(irq) / 32) * 4);
 	spin_unlock(&irq_controller_lock);
 }
 
 #ifdef CONFIG_SMP
 static void gic_set_cpu(unsigned int irq, cpumask_t mask_val)
 {
-	void __iomem *reg = gic_dist_base + GIC_DIST_TARGET + (irq & ~3);
+	void __iomem *reg = gic_dist_base(irq) + GIC_DIST_TARGET + (gic_irq(irq) & ~3);
 	unsigned int shift = (irq % 4) * 8;
 	unsigned int cpu = first_cpu(mask_val);
 	u32 val;
@@ -95,6 +125,37 @@ static void gic_set_cpu(unsigned int irq, cpumask_t mask_val)
 }
 #endif
 
+static void fastcall gic_handle_cascade_irq(unsigned int irq,
+					    struct irq_desc *desc)
+{
+	struct gic_chip_data *chip_data = get_irq_data(irq);
+	struct irq_chip *chip = get_irq_chip(irq);
+	unsigned int cascade_irq;
+	unsigned long status;
+
+	/* primary controller ack'ing */
+	chip->ack(irq);
+
+	spin_lock(&irq_controller_lock);
+	status = readl(chip_data->cpu_base + GIC_CPU_INTACK);
+	spin_unlock(&irq_controller_lock);
+
+	cascade_irq = (status & 0x3ff);
+	if (cascade_irq > 1020)
+		goto out;
+	if (cascade_irq < 32 || cascade_irq >= NR_IRQS) {
+		do_bad_IRQ(cascade_irq, desc);
+		goto out;
+	}
+
+	cascade_irq += chip_data->irq_offset;
+	generic_handle_irq(cascade_irq);
+
+ out:
+	/* primary controller unmasking */
+	chip->unmask(irq);
+}
+
 static struct irq_chip gic_chip = {
 	.name		= "GIC",
 	.ack		= gic_ack_irq,
@@ -105,15 +166,29 @@ static struct irq_chip gic_chip = {
 #endif
 };
 
-void __init gic_dist_init(void __iomem *base)
+void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
+{
+	if (gic_nr >= MAX_GIC_NR)
+		BUG();
+	if (set_irq_data(irq, &gic_data[gic_nr]) != 0)
+		BUG();
+	set_irq_chained_handler(irq, gic_handle_cascade_irq);
+}
+
+void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
+			  unsigned int irq_start)
 {
 	unsigned int max_irq, i;
 	u32 cpumask = 1 << smp_processor_id();
 
+	if (gic_nr >= MAX_GIC_NR)
+		BUG();
+
 	cpumask |= cpumask << 8;
 	cpumask |= cpumask << 16;
 
-	gic_dist_base = base;
+	gic_data[gic_nr].dist_base = base;
+	gic_data[gic_nr].irq_offset = (irq_start - 1) & ~31;
 
 	writel(0, base + GIC_DIST_CTRL);
 
@@ -158,8 +233,9 @@ void __init gic_dist_init(void __iomem *base)
 	/*
 	 * Setup the Linux IRQ subsystem.
 	 */
-	for (i = 29; i < max_irq; i++) {
+	for (i = irq_start; i < gic_data[gic_nr].irq_offset + max_irq; i++) {
 		set_irq_chip(i, &gic_chip);
+		set_irq_chip_data(i, &gic_data[gic_nr]);
 		set_irq_handler(i, handle_level_irq);
 		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 	}
@@ -167,9 +243,13 @@ void __init gic_dist_init(void __iomem *base)
 	writel(1, base + GIC_DIST_CTRL);
 }
 
-void __cpuinit gic_cpu_init(void __iomem *base)
+void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base)
 {
-	gic_cpu_base = base;
+	if (gic_nr >= MAX_GIC_NR)
+		BUG();
+
+	gic_data[gic_nr].cpu_base = base;
+
 	writel(0xf0, base + GIC_CPU_PRIMASK);
 	writel(1, base + GIC_CPU_CTRL);
 }
@@ -179,6 +259,7 @@ void gic_raise_softirq(cpumask_t cpumask, unsigned int irq)
 {
 	unsigned long map = *cpus_addr(cpumask);
 
-	writel(map << 16 | irq, gic_dist_base + GIC_DIST_SOFTINT);
+	/* this always happens on GIC0 */
+	writel(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
 }
 #endif
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index b8484e1..709a9b1 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -52,7 +52,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 * core (e.g. timer irq), then they will not have been enabled
 	 * for us: do so
 	 */
-	gic_cpu_init(__io_address(REALVIEW_GIC_CPU_BASE));
+	gic_cpu_init(0, __io_address(REALVIEW_GIC_CPU_BASE));
 
 	/*
 	 * let the primary processor know we're out of the
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 9741b4d..b6a6f68 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -143,8 +143,8 @@ static void __init gic_init_irq(void)
 	writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + 0xd8);
 	writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
 #endif
-	gic_dist_init(__io_address(REALVIEW_GIC_DIST_BASE));
-	gic_cpu_init(__io_address(REALVIEW_GIC_CPU_BASE));
+	gic_dist_init(0, __io_address(REALVIEW_GIC_DIST_BASE), 29);
+	gic_cpu_init(0, __io_address(REALVIEW_GIC_CPU_BASE));
 }
 
 static void __init realview_eb_init(void)
diff --git a/include/asm-arm/hardware/gic.h b/include/asm-arm/hardware/gic.h
index 3fa5eb7..966e428 100644
--- a/include/asm-arm/hardware/gic.h
+++ b/include/asm-arm/hardware/gic.h
@@ -33,8 +33,9 @@
 #define GIC_DIST_SOFTINT		0xf00
 
 #ifndef __ASSEMBLY__
-void gic_dist_init(void __iomem *base);
-void gic_cpu_init(void __iomem *base);
+void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start);
+void gic_cpu_init(unsigned int gic_nr, void __iomem *base);
+void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
 void gic_raise_softirq(cpumask_t cpumask, unsigned int irq);
 #endif
 
-- 
cgit v1.1


From 3edf22ab34e1fdffc8c0c7c7b7da4d0aebdba118 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Wed, 14 Feb 2007 19:18:09 +0100
Subject: [ARM] 4190/2:  Add the secondary GIC support for the RealView/EB 
 MPCore platform

This patch adds the registration of the secondary GIC on the
baseboard, together with the IRQ chaining setup.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-realview/realview_eb.c     | 19 +++++++++++++++++++
 include/asm-arm/arch-realview/irqs.h     |  5 ++++-
 include/asm-arm/arch-realview/platform.h |  6 ++++++
 3 files changed, 29 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index b6a6f68..0013914 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -57,7 +57,21 @@ static struct map_desc realview_eb_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(REALVIEW_GIC_DIST_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
+	},
+#ifdef CONFIG_REALVIEW_MPCORE
+	{
+		.virtual	= IO_ADDRESS(REALVIEW_GIC1_CPU_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_GIC1_CPU_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
 	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_GIC1_DIST_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_GIC1_DIST_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+#endif
+	{
 		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
 		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
 		.length		= SZ_4K,
@@ -145,6 +159,11 @@ static void __init gic_init_irq(void)
 #endif
 	gic_dist_init(0, __io_address(REALVIEW_GIC_DIST_BASE), 29);
 	gic_cpu_init(0, __io_address(REALVIEW_GIC_CPU_BASE));
+#ifdef CONFIG_REALVIEW_MPCORE
+	gic_dist_init(1, __io_address(REALVIEW_GIC1_DIST_BASE), 64);
+	gic_cpu_init(1, __io_address(REALVIEW_GIC1_CPU_BASE));
+	gic_cascade_irq(1, IRQ_EB_IRQ1);
+#endif
 }
 
 static void __init realview_eb_init(void)
diff --git a/include/asm-arm/arch-realview/irqs.h b/include/asm-arm/arch-realview/irqs.h
index 76b498e..5a5db56 100644
--- a/include/asm-arm/arch-realview/irqs.h
+++ b/include/asm-arm/arch-realview/irqs.h
@@ -78,6 +78,9 @@
 #define IRQ_PMU_SCU6		(IRQ_GIC_START + INT_PMU_SCU6)
 #define IRQ_PMU_SCU7		(IRQ_GIC_START + INT_PMU_SCU7)
 
+#define IRQ_EB_IRQ1		(IRQ_GIC_START + INT_EB_IRQ1)
+#define IRQ_EB_IRQ2		(IRQ_GIC_START + INT_EB_IRQ2)
+
 #define IRQMASK_WDOGINT		INTMASK_WDOGINT
 #define IRQMASK_SOFTINT		INTMASK_SOFTINT
 #define IRQMASK_COMMRx 		INTMASK_COMMRx
@@ -115,4 +118,4 @@
 #define IRQMASK_ETH		INTMASK_ETH
 #define IRQMASK_USB		INTMASK_USB
 
-#define NR_IRQS			(IRQ_GIC_START + 64)
+#define NR_IRQS			(IRQ_GIC_START + 96)
diff --git a/include/asm-arm/arch-realview/platform.h b/include/asm-arm/arch-realview/platform.h
index 18d7c18..bf52ca7 100644
--- a/include/asm-arm/arch-realview/platform.h
+++ b/include/asm-arm/arch-realview/platform.h
@@ -212,6 +212,8 @@
 #define REALVIEW_TWD_BASE		0x10100700
 #define REALVIEW_TWD_SIZE		0x00000100
 #define REALVIEW_GIC_DIST_BASE		0x10101000	/* Generic interrupt controller distributor */
+#define REALVIEW_GIC1_CPU_BASE        0x10040000	/* Generic interrupt controller CPU interface */
+#define REALVIEW_GIC1_DIST_BASE       0x10041000	/* Generic interrupt controller distributor */
 #endif
 #define REALVIEW_SMC_BASE             0x10080000	/* SMC */
 	/* Reserved 0x10090000 - 0x100EFFFF */
@@ -306,7 +308,11 @@
 #define INT_USB				29	/* USB controller */
 #define INT_TSPENINT			30	/* Touchscreen pen */
 #define INT_TSKPADINT			31	/* Touchscreen keypad */
+
 #else
+
+#define MAX_GIC_NR			2
+
 #define INT_AACI			0
 #define INT_TIMERINT0_1			1
 #define INT_TIMERINT2_3			2
-- 
cgit v1.1


From 4b17244c133689ad0cbdca37ce3e15068f120428 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Wed, 14 Feb 2007 19:20:28 +0100
Subject: [ARM] 4109/2:  Add support for the RealView/EB MPCore revC platform

The kernel originally supported revB only. This patch enables revC by
default and adds a config option for building the kernel for the revB
platform. Since the SCU base address was hard-coded in the proc-v6.S
file (and only valid for RealView/EB revB), this patch also adds a
more generic support for defining the SCU information.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-realview/Kconfig           | 10 ++++++++++
 arch/arm/mach-realview/realview_eb.c     |  4 ++--
 arch/arm/mm/proc-v6.S                    |  8 +++++---
 include/asm-arm/arch-realview/hardware.h |  2 +-
 include/asm-arm/arch-realview/platform.h | 10 ++++++++++
 include/asm-arm/arch-realview/scu.h      |  8 ++++++++
 include/asm-arm/hardware/arm_scu.h       |  2 ++
 7 files changed, 38 insertions(+), 6 deletions(-)
 create mode 100644 include/asm-arm/arch-realview/scu.h

diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index 17f5f44..68bc6b2 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -16,4 +16,14 @@ config REALVIEW_MPCORE
 	  kernel built with this option enabled is not compatible with
 	  other tiles.
 
+config REALVIEW_MPCORE_REVB
+	bool "Support MPcore RevB tile"
+	depends on REALVIEW_MPCORE
+	default n
+	help
+	  Enable support for the MPCore RevB tile on the Realview platform.
+	  Since there are device address differences, a
+	  kernel built with this option enabled is not compatible with
+	  other tiles.
+
 endmenu
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 0013914..effe243 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -152,9 +152,9 @@ static void __init gic_init_irq(void)
 #ifdef CONFIG_REALVIEW_MPCORE
 	unsigned int pldctrl;
 	writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK));
-	pldctrl = readl(__io_address(REALVIEW_SYS_BASE)	+ 0xd8);
+	pldctrl = readl(__io_address(REALVIEW_SYS_BASE)	+ REALVIEW_MPCORE_SYS_PLD_CTRL1);
 	pldctrl |= 0x00800000;	/* New irq mode */
-	writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + 0xd8);
+	writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_MPCORE_SYS_PLD_CTRL1);
 	writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
 #endif
 	gic_dist_init(0, __io_address(REALVIEW_GIC_DIST_BASE), 29);
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 7b1843b..f27d9eb 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -14,10 +14,13 @@
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
 #include <asm/elf.h>
-#include <asm/hardware/arm_scu.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 
+#ifdef CONFIG_SMP
+#include <asm/hardware/arm_scu.h>
+#endif
+
 #include "proc-macros.S"
 
 #define D_CACHE_LINE_SIZE	32
@@ -183,8 +186,7 @@ __v6_setup:
 	/* Set up the SCU on core 0 only */
 	mrc	p15, 0, r0, c0, c0, 5		@ CPU core number
 	ands	r0, r0, #15
-	moveq	r0, #0x10000000 @ SCU_BASE
-	orreq	r0, r0, #0x00100000
+	ldreq	r0, =SCU_BASE
 	ldreq	r5, [r0, #SCU_CTRL]
 	orreq	r5, r5, #1
 	streq	r5, [r0, #SCU_CTRL]
diff --git a/include/asm-arm/arch-realview/hardware.h b/include/asm-arm/arch-realview/hardware.h
index 9ca76dc..aa78fe0 100644
--- a/include/asm-arm/arch-realview/hardware.h
+++ b/include/asm-arm/arch-realview/hardware.h
@@ -26,7 +26,7 @@
 #include <asm/arch/platform.h>
 
 /* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x)		(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
+#define IO_ADDRESS(x)		((((x) & 0x0effffff) | (((x) >> 4) & 0x0f000000)) + 0xf0000000)
 #define __io_address(n)		__io(IO_ADDRESS(n))
 
 #endif
diff --git a/include/asm-arm/arch-realview/platform.h b/include/asm-arm/arch-realview/platform.h
index bf52ca7..87acd9c 100644
--- a/include/asm-arm/arch-realview/platform.h
+++ b/include/asm-arm/arch-realview/platform.h
@@ -207,11 +207,21 @@
 #define REALVIEW_GIC_CPU_BASE         0x10040000	/* Generic interrupt controller CPU interface */
 #define REALVIEW_GIC_DIST_BASE        0x10041000	/* Generic interrupt controller distributor */
 #else
+#ifdef CONFIG_REALVIEW_MPCORE_REVB
 #define REALVIEW_MPCORE_SCU_BASE	0x10100000	/*  SCU registers */
 #define REALVIEW_GIC_CPU_BASE		0x10100100	/* Generic interrupt controller CPU interface */
 #define REALVIEW_TWD_BASE		0x10100700
 #define REALVIEW_TWD_SIZE		0x00000100
 #define REALVIEW_GIC_DIST_BASE		0x10101000	/* Generic interrupt controller distributor */
+#define REALVIEW_MPCORE_SYS_PLD_CTRL1 0xD8		/*  Register offset for MPCore sysctl */
+#else
+#define REALVIEW_MPCORE_SCU_BASE      0x1F000000	/*  SCU registers */
+#define REALVIEW_GIC_CPU_BASE         0x1F000100	/* Generic interrupt controller CPU interface */
+#define REALVIEW_TWD_BASE             0x1F000700
+#define REALVIEW_TWD_SIZE             0x00000100
+#define REALVIEW_GIC_DIST_BASE        0x1F001000	/* Generic interrupt controller distributor */
+#define REALVIEW_MPCORE_SYS_PLD_CTRL1 0x74		/*  Register offset for MPCore sysctl */
+#endif
 #define REALVIEW_GIC1_CPU_BASE        0x10040000	/* Generic interrupt controller CPU interface */
 #define REALVIEW_GIC1_DIST_BASE       0x10041000	/* Generic interrupt controller distributor */
 #endif
diff --git a/include/asm-arm/arch-realview/scu.h b/include/asm-arm/arch-realview/scu.h
new file mode 100644
index 0000000..cc29364
--- /dev/null
+++ b/include/asm-arm/arch-realview/scu.h
@@ -0,0 +1,8 @@
+#ifndef __ASMARM_ARCH_SCU_H
+#define __ASMARM_ARCH_SCU_H
+
+#include <asm/arch/platform.h>
+
+#define SCU_BASE	REALVIEW_MPCORE_SCU_BASE
+
+#endif
diff --git a/include/asm-arm/hardware/arm_scu.h b/include/asm-arm/hardware/arm_scu.h
index 9903f60..7d28eb5 100644
--- a/include/asm-arm/hardware/arm_scu.h
+++ b/include/asm-arm/hardware/arm_scu.h
@@ -1,6 +1,8 @@
 #ifndef ASMARM_HARDWARE_ARM_SCU_H
 #define ASMARM_HARDWARE_ARM_SCU_H
 
+#include <asm/arch/scu.h>
+
 /*
  * SCU registers
  */
-- 
cgit v1.1


From 7770bddb27ea84519486d8bb5d35d36d580c451b Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Mon, 5 Feb 2007 14:48:24 +0100
Subject: [ARM] 4130/1: Add L220 support to RealView/EB

This patch enables the L220 on the RealView/EB MPCore platform.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-realview/Kconfig           |  1 +
 arch/arm/mach-realview/realview_eb.c     | 11 +++++++++++
 include/asm-arm/arch-realview/platform.h |  2 ++
 3 files changed, 14 insertions(+)

diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index 68bc6b2..35156ca 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -10,6 +10,7 @@ config MACH_REALVIEW_EB
 config REALVIEW_MPCORE
 	bool "Support MPcore tile"
 	depends on MACH_REALVIEW_EB
+	select CACHE_L2X0
 	help
 	  Enable support for the MPCore tile on the Realview platform.
 	  Since there are device address and interrupt differences, a
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index effe243..3dba666 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -31,6 +31,7 @@
 #include <asm/mach-types.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/icst307.h>
+#include <asm/hardware/cache-l2x0.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -69,6 +70,11 @@ static struct map_desc realview_eb_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(REALVIEW_GIC1_DIST_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_MPCORE_L220_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_MPCORE_L220_BASE),
+		.length		= SZ_8K,
+		.type		= MT_DEVICE,
 	},
 #endif
 	{
@@ -170,6 +176,11 @@ static void __init realview_eb_init(void)
 {
 	int i;
 
+#ifdef CONFIG_REALVIEW_MPCORE
+	/* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled
+	 * Bits:  .... ...0 0111 1001 0000 .... .... .... */
+	l2x0_init(__io_address(REALVIEW_MPCORE_L220_BASE), 0x00790000, 0xfe000fff);
+#endif
 	clk_register(&realview_clcd_clk);
 
 	platform_device_register(&realview_flash_device);
diff --git a/include/asm-arm/arch-realview/platform.h b/include/asm-arm/arch-realview/platform.h
index 87acd9c..6e0eab9 100644
--- a/include/asm-arm/arch-realview/platform.h
+++ b/include/asm-arm/arch-realview/platform.h
@@ -213,6 +213,7 @@
 #define REALVIEW_TWD_BASE		0x10100700
 #define REALVIEW_TWD_SIZE		0x00000100
 #define REALVIEW_GIC_DIST_BASE		0x10101000	/* Generic interrupt controller distributor */
+#define REALVIEW_MPCORE_L220_BASE	0x10102000	/* L220 registers */
 #define REALVIEW_MPCORE_SYS_PLD_CTRL1 0xD8		/*  Register offset for MPCore sysctl */
 #else
 #define REALVIEW_MPCORE_SCU_BASE      0x1F000000	/*  SCU registers */
@@ -220,6 +221,7 @@
 #define REALVIEW_TWD_BASE             0x1F000700
 #define REALVIEW_TWD_SIZE             0x00000100
 #define REALVIEW_GIC_DIST_BASE        0x1F001000	/* Generic interrupt controller distributor */
+#define REALVIEW_MPCORE_L220_BASE     0x1F002000	/* L220 registers */
 #define REALVIEW_MPCORE_SYS_PLD_CTRL1 0x74		/*  Register offset for MPCore sysctl */
 #endif
 #define REALVIEW_GIC1_CPU_BASE        0x10040000	/* Generic interrupt controller CPU interface */
-- 
cgit v1.1


From e9390ef845a5fdb0506d6d37b1461c48394c47b3 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 15 Feb 2007 12:50:03 +0100
Subject: [ARM] 4193/1: S3C2443: clock register definitions

Clock register definitions for the S3C2443

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h | 192 ++++++++++++++++++++++
 1 file changed, 192 insertions(+)
 create mode 100644 include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h

diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h b/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
new file mode 100644
index 0000000..e696554
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
@@ -0,0 +1,192 @@
+/* linux/include/asm-arm/arch-s3c2410/regs-clock.h
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2443 clock register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_S3C2443_CLOCK
+#define __ASM_ARM_REGS_S3C2443_CLOCK
+
+#define S3C2443_CLKREG(x)		((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2443_PLLCON_MDIVSHIFT	16
+#define S3C2443_PLLCON_PDIVSHIFT	8
+#define S3C2443_PLLCON_SDIVSHIFT	0
+#define S3C2443_PLLCON_MDIVMASK		((1<<(1+(23-16)))-1)
+#define S3C2443_PLLCON_PDIVMASK		((1<<(1+(9-8)))-1)
+#define S3C2443_PLLCON_SDIVMASK		(3)
+
+#define S3C2443_MPLLCON			S3C2443_CLKREG(0x10)
+#define S3C2443_EPLLCON			S3C2443_CLKREG(0x18)
+#define S3C2443_CLKSRC			S3C2443_CLKREG(0x20)
+#define S3C2443_CLKDIV0			S3C2443_CLKREG(0x24)
+#define S3C2443_CLKDIV1			S3C2443_CLKREG(0x28)
+#define S3C2443_HCLKCON			S3C2443_CLKREG(0x30)
+#define S3C2443_PCLKCON			S3C2443_CLKREG(0x34)
+#define S3C2443_SCLKCON			S3C2443_CLKREG(0x38)
+#define S3C2443_PWRMODE			S3C2443_CLKREG(0x40)
+#define S3C2443_SWRST			S3C2443_CLKREG(0x44)
+#define S3C2443_BUSPRI0			S3C2443_CLKREG(0x50)
+#define S3C2443_SYSID			S3C2443_CLKREG(0x5C)
+#define S3C2443_PWRCFG			S3C2443_CLKREG(0x60)
+#define S3C2443_RSTCON			S3C2443_CLKREG(0x64)
+
+#define S3C2443_PLLCON_OFF		(1<<24)
+
+#define S3C2443_CLKSRC_I2S_EXT		(1<<14)
+#define S3C2443_CLKSRC_I2S_EPLLDIV	(0<<14)
+#define S3C2443_CLKSRC_I2S_EPLLREF	(2<<14)
+#define S3C2443_CLKSRC_I2S_EPLLREF3	(3<<14)
+#define S3C2443_CLKSRC_I2S_MASK		(3<<14)
+
+#define S3C2443_CLKSRC_EPLLREF_XTAL	(2<<8)
+#define S3C2443_CLKSRC_EPLLREF_EXTCLK	(3<<8)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF	(0<<8)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF2	(1<<8)
+#define S3C2443_CLKSRC_EPLLREF_MASK	(3<<8)
+
+#define S3C2443_CLKSRC_ESYSCLK_EPLL	(1<<6)
+#define S3C2443_CLKSRC_MSYSCLK_MPLL	(1<<4)
+#define S3C2443_CLKSRC_EXTCLK_DIV	(1<<3)
+
+#define S3C2443_CLKDIV0_DVS		(1<<13)
+#define S3C2443_CLKDIV0_HALF_HCLK	(1<<3)
+#define S3C2443_CLKDIV0_HALF_PCLK	(1<<2)
+
+#define S3C2443_CLKDIV0_HCLKDIV_MASK	(3<<0)
+
+#define S3C2443_CLKDIV0_EXTDIV_MASK	(3<<6)
+#define S3C2443_CLKDIV0_EXTDIV_SHIFT	(6)
+
+#define S3C2443_CLKDIV0_PREDIV_MASK	(3<<4)
+#define S3C2443_CLKDIV0_PREDIV_SHIFT	(4)
+
+#define S3C2443_CLKDIV0_ARMDIV_MASK	(15<<9)
+#define S3C2443_CLKDIV0_ARMDIV_SHIFT	(9)
+#define S3C2443_CLKDIV0_ARMDIV_1	(0<<9)
+#define S3C2443_CLKDIV0_ARMDIV_2	(8<<9)
+#define S3C2443_CLKDIV0_ARMDIV_3	(2<<9)
+#define S3C2443_CLKDIV0_ARMDIV_4	(9<<9)
+#define S3C2443_CLKDIV0_ARMDIV_6	(10<<9)
+#define S3C2443_CLKDIV0_ARMDIV_8	(11<<9)
+#define S3C2443_CLKDIV0_ARMDIV_12	(13<<9)
+#define S3C2443_CLKDIV0_ARMDIV_16	(15<<9)
+
+/* S3C2443_CLKDIV1 */
+
+#define S3C2443_CLKDIV1_CAMDIV_MASK	(15<<26)
+#define S3C2443_CLKDIV1_CAMDIV_SHIFT	(26)
+
+#define S3C2443_CLKDIV1_HSSPIDIV_MASK	(3<<24)
+#define S3C2443_CLKDIV1_HSSPIDIV_SHIFT	(24)
+
+#define S3C2443_CLKDIV1_DISPDIV_MASK	(0xff<<16)
+#define S3C2443_CLKDIV1_DISPDIV_SHIFT	(16)
+
+#define S3C2443_CLKDIV1_I2SDIV_MASK	(15<<12)
+#define S3C2443_CLKDIV1_I2SDIV_SHIFT	(12)
+
+#define S3C2443_CLKDIV1_UARTDIV_MASK	(15<<8)
+#define S3C2443_CLKDIV1_UARTDIV_SHIFT	(8)
+
+#define S3C2443_CLKDIV1_HSMMCDIV_MASK	(3<<6)
+#define S3C2443_CLKDIV1_HSMMCDIV_SHIFT	(6)
+
+#define S3C2443_CLKDIV1_USBHOSTDIV_MASK	(3<<4)
+#define S3C2443_CLKDIV1_USBHOSTDIV_SHIFT (4)
+
+#define S3C2443_CLKCON_NAND
+
+#define S3C2443_HCLKCON_DMA0		(1<<0)
+#define S3C2443_HCLKCON_DMA1		(1<<1)
+#define S3C2443_HCLKCON_DMA2		(1<<2)
+#define S3C2443_HCLKCON_DMA3		(1<<3)
+#define S3C2443_HCLKCON_DMA4		(1<<4)
+#define S3C2443_HCLKCON_DMA5		(1<<5)
+#define S3C2443_HCLKCON_CAMIF		(1<<8)
+#define S3C2443_HCLKCON_DISP		(1<<9)
+#define S3C2443_HCLKCON_LCDC		(1<<10)
+#define S3C2443_HCLKCON_USBH		(1<<11)
+#define S3C2443_HCLKCON_USBD		(1<<12)
+#define S3C2443_HCLKCON_HSMMC		(1<<16)
+#define S3C2443_HCLKCON_CFC		(1<<17)
+#define S3C2443_HCLKCON_SSMC		(1<<18)
+#define S3C2443_HCLKCON_DRAMC		(1<<19)
+
+#define S3C2443_PCLKCON_UART0		(1<<0)
+#define S3C2443_PCLKCON_UART1		(1<<1)
+#define S3C2443_PCLKCON_UART2		(1<<2)
+#define S3C2443_PCLKCON_UART3		(1<<3)
+#define S3C2443_PCLKCON_IIC		(1<<4)
+#define S3C2443_PCLKCON_SDI		(1<<5)
+#define S3C2443_PCLKCON_ADC		(1<<7)
+#define S3C2443_PCLKCON_IIS		(1<<9)
+#define S3C2443_PCLKCON_PWMT		(1<<10)
+#define S3C2443_PCLKCON_WDT		(1<<11)
+#define S3C2443_PCLKCON_RTC		(1<<12)
+#define S3C2443_PCLKCON_GPIO		(1<<13)
+#define S3C2443_PCLKCON_SPI0		(1<<14)
+#define S3C2443_PCLKCON_SPI1		(1<<15)
+
+#define S3C2443_SCLKCON_DDRCLK		(1<<16)
+#define S3C2443_SCLKCON_SSMCCLK		(1<<15)
+#define S3C2443_SCLKCON_HSSPICLK	(1<<14)
+#define S3C2443_SCLKCON_HSMMCCLK_EXT	(1<<13)
+#define S3C2443_SCLKCON_HSMMCCLK_EPLL	(1<<12)
+#define S3C2443_SCLKCON_CAMCLK		(1<<11)
+#define S3C2443_SCLKCON_DISPCLK		(1<<10)
+#define S3C2443_SCLKCON_I2SCLK		(1<<9)
+#define S3C2443_SCLKCON_UARTCLK		(1<<8)
+#define S3C2443_SCLKCON_USBHOST		(1<<1)
+
+#include <asm/div64.h>
+
+static inline unsigned int
+s3c2443_get_mpll(unsigned int pllval, unsigned int baseclk)
+{
+	unsigned int mdiv, pdiv, sdiv;
+	uint64_t fvco;
+
+	mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
+	pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
+	sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
+
+	mdiv &= S3C2443_PLLCON_MDIVMASK;
+	pdiv &= S3C2443_PLLCON_PDIVMASK;
+	sdiv &= S3C2443_PLLCON_SDIVMASK;
+
+	fvco = (uint64_t)baseclk * (2 * (mdiv + 8));
+	do_div(fvco, pdiv << sdiv);
+
+	return (unsigned int)fvco;
+}
+
+static inline unsigned int
+s3c2443_get_epll(unsigned int pllval, unsigned int baseclk)
+{
+	unsigned int mdiv, pdiv, sdiv;
+	uint64_t fvco;
+
+	mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
+	pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
+	sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
+
+	mdiv &= S3C2443_PLLCON_MDIVMASK;
+	pdiv &= S3C2443_PLLCON_PDIVMASK;
+	sdiv &= S3C2443_PLLCON_SDIVMASK;
+
+	fvco = (uint64_t)baseclk * (mdiv + 8);
+	do_div(fvco, (pdiv + 2) << sdiv);
+
+	return (unsigned int)fvco;
+}
+
+#endif /*  __ASM_ARM_REGS_S3C2443_CLOCK */
+
-- 
cgit v1.1


From 6619d58a6569092ab6829ae1cdde78418999649d Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 15 Feb 2007 12:52:01 +0100
Subject: [ARM] 4194/1: S3C2443: include/asm-arm/arch-s3c2410/regs-gpio.h
 updates

Updates for regs-gpio.h for S3C2443

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-s3c2410/regs-gpio.h | 32 +++++++++++++++++++++++++++++---
 1 file changed, 29 insertions(+), 3 deletions(-)

diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h
index eae9169..dea578b 100644
--- a/include/asm-arm/arch-s3c2410/regs-gpio.h
+++ b/include/asm-arm/arch-s3c2410/regs-gpio.h
@@ -201,7 +201,7 @@
 #define S3C2400_GPBDAT	   S3C2410_GPIOREG(0x0C)
 #define S3C2400_GPBUP	   S3C2410_GPIOREG(0x10)
 
-/* no i/o pin in port b can have value 3! */
+/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
 
 #define S3C2410_GPB0         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
 #define S3C2410_GPB0_INP     (0x00 << 0)
@@ -242,6 +242,7 @@
 #define S3C2410_GPB5_INP     (0x00 << 10)
 #define S3C2410_GPB5_OUTP    (0x01 << 10)
 #define S3C2410_GPB5_nXBACK  (0x02 << 10)
+#define S3C2443_GPB5_XBACK   (0x03 << 10)
 #define S3C2400_GPB5_DATA21  (0x02 << 10)
 #define S3C2400_GPB5_nCTS1   (0x03 << 10)
 
@@ -249,6 +250,7 @@
 #define S3C2410_GPB6_INP     (0x00 << 12)
 #define S3C2410_GPB6_OUTP    (0x01 << 12)
 #define S3C2410_GPB6_nXBREQ  (0x02 << 12)
+#define S3C2443_GPB6_XBREQ   (0x03 << 12)
 #define S3C2400_GPB6_DATA22  (0x02 << 12)
 #define S3C2400_GPB6_nRTS1   (0x03 << 12)
 
@@ -256,6 +258,7 @@
 #define S3C2410_GPB7_INP     (0x00 << 14)
 #define S3C2410_GPB7_OUTP    (0x01 << 14)
 #define S3C2410_GPB7_nXDACK1 (0x02 << 14)
+#define S3C2443_GPB7_XDACK1  (0x03 << 14)
 #define S3C2400_GPB7_DATA23  (0x02 << 14)
 
 #define S3C2410_GPB8         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
@@ -268,6 +271,7 @@
 #define S3C2410_GPB9_INP     (0x00 << 18)
 #define S3C2410_GPB9_OUTP    (0x01 << 18)
 #define S3C2410_GPB9_nXDACK0 (0x02 << 18)
+#define S3C2443_GPB9_XDACK0  (0x03 << 18)
 #define S3C2400_GPB9_DATA25  (0x02 << 18)
 #define S3C2400_GPB9_I2SSDI  (0x03 << 18)
 
@@ -275,6 +279,7 @@
 #define S3C2410_GPB10_INP    (0x00 << 20)
 #define S3C2410_GPB10_OUTP   (0x01 << 20)
 #define S3C2410_GPB10_nXDRE0 (0x02 << 20)
+#define S3C2443_GPB10_XDREQ0 (0x03 << 20)
 #define S3C2400_GPB10_DATA26 (0x02 << 20)
 #define S3C2400_GPB10_nSS    (0x03 << 20)
 
@@ -556,6 +561,7 @@
 #define S3C2410_GPE0_INP       (0x00 << 0)
 #define S3C2410_GPE0_OUTP      (0x01 << 0)
 #define S3C2410_GPE0_I2SLRCK   (0x02 << 0)
+#define S3C2443_GPE0_AC_nRESET (0x03 << 0)
 #define S3C2400_GPE0_EINT0     (0x02 << 0)
 #define S3C2410_GPE0_MASK      (0x03 << 0)
 
@@ -563,6 +569,7 @@
 #define S3C2410_GPE1_INP       (0x00 << 2)
 #define S3C2410_GPE1_OUTP      (0x01 << 2)
 #define S3C2410_GPE1_I2SSCLK   (0x02 << 2)
+#define S3C2443_GPE1_AC_SYNC   (0x03 << 2)
 #define S3C2400_GPE1_EINT1     (0x02 << 2)
 #define S3C2400_GPE1_nSS       (0x03 << 2)
 #define S3C2410_GPE1_MASK      (0x03 << 2)
@@ -571,6 +578,7 @@
 #define S3C2410_GPE2_INP       (0x00 << 4)
 #define S3C2410_GPE2_OUTP      (0x01 << 4)
 #define S3C2410_GPE2_CDCLK     (0x02 << 4)
+#define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
 #define S3C2400_GPE2_EINT2     (0x02 << 4)
 #define S3C2400_GPE2_I2SSDI    (0x03 << 4)
 
@@ -578,6 +586,7 @@
 #define S3C2410_GPE3_INP       (0x00 << 6)
 #define S3C2410_GPE3_OUTP      (0x01 << 6)
 #define S3C2410_GPE3_I2SSDI    (0x02 << 6)
+#define S3C2443_GPE3_AC_SDI    (0x03 << 6)
 #define S3C2400_GPE3_EINT3     (0x02 << 6)
 #define S3C2400_GPE3_nCTS1     (0x03 << 6)
 #define S3C2410_GPE3_nSS0      (0x03 << 6)
@@ -587,6 +596,7 @@
 #define S3C2410_GPE4_INP       (0x00 << 8)
 #define S3C2410_GPE4_OUTP      (0x01 << 8)
 #define S3C2410_GPE4_I2SSDO    (0x02 << 8)
+#define S3C2443_GPE4_AC_SDO    (0x03 << 8)
 #define S3C2400_GPE4_EINT4     (0x02 << 8)
 #define S3C2400_GPE4_nRTS1     (0x03 << 8)
 #define S3C2410_GPE4_I2SSDI    (0x03 << 8)
@@ -596,6 +606,7 @@
 #define S3C2410_GPE5_INP       (0x00 << 10)
 #define S3C2410_GPE5_OUTP      (0x01 << 10)
 #define S3C2410_GPE5_SDCLK     (0x02 << 10)
+#define S3C2443_GPE5_SD1_CLK   (0x02 << 10)
 #define S3C2400_GPE5_EINT5     (0x02 << 10)
 #define S3C2400_GPE5_TCLK1     (0x03 << 10)
 
@@ -603,24 +614,32 @@
 #define S3C2410_GPE6_INP       (0x00 << 12)
 #define S3C2410_GPE6_OUTP      (0x01 << 12)
 #define S3C2410_GPE6_SDCMD     (0x02 << 12)
+#define S3C2443_GPE6_SD1_CMD   (0x02 << 12)
+#define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
 #define S3C2400_GPE6_EINT6     (0x02 << 12)
 
 #define S3C2410_GPE7           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
 #define S3C2410_GPE7_INP       (0x00 << 14)
 #define S3C2410_GPE7_OUTP      (0x01 << 14)
 #define S3C2410_GPE7_SDDAT0    (0x02 << 14)
+#define S3C2443_GPE5_SD1_DAT0  (0x02 << 14)
+#define S3C2443_GPE7_AC_SDI    (0x03 << 14)
 #define S3C2400_GPE7_EINT7     (0x02 << 14)
 
 #define S3C2410_GPE8           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
 #define S3C2410_GPE8_INP       (0x00 << 16)
 #define S3C2410_GPE8_OUTP      (0x01 << 16)
 #define S3C2410_GPE8_SDDAT1    (0x02 << 16)
+#define S3C2443_GPE8_SD1_DAT1  (0x02 << 16)
+#define S3C2443_GPE8_AC_SDO    (0x03 << 16)
 #define S3C2400_GPE8_nXDACK0   (0x02 << 16)
 
 #define S3C2410_GPE9           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
 #define S3C2410_GPE9_INP       (0x00 << 18)
 #define S3C2410_GPE9_OUTP      (0x01 << 18)
 #define S3C2410_GPE9_SDDAT2    (0x02 << 18)
+#define S3C2443_GPE9_SD1_DAT2  (0x02 << 18)
+#define S3C2443_GPE9_AC_SYNC   (0x03 << 18)
 #define S3C2400_GPE9_nXDACK1   (0x02 << 18)
 #define S3C2400_GPE9_nXBACK    (0x03 << 18)
 
@@ -628,6 +647,8 @@
 #define S3C2410_GPE10_INP      (0x00 << 20)
 #define S3C2410_GPE10_OUTP     (0x01 << 20)
 #define S3C2410_GPE10_SDDAT3   (0x02 << 20)
+#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
+#define S3C2443_GPE10_AC_nRESET (0x03 << 20)
 #define S3C2400_GPE10_nXDREQ0  (0x02 << 20)
 
 #define S3C2410_GPE11          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
@@ -796,6 +817,7 @@
 #define S3C2400_GPG4_MMCCLK   (0x02 << 8)
 #define S3C2400_GPG4_I2SSDI   (0x03 << 8)
 #define S3C2410_GPG4_LCDPWREN (0x03 << 8)
+#define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
 
 #define S3C2410_GPG5          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
 #define S3C2410_GPG5_INP      (0x00 << 10)
@@ -803,7 +825,7 @@
 #define S3C2410_GPG5_EINT13   (0x02 << 10)
 #define S3C2400_GPG5_MMCCMD   (0x02 << 10)
 #define S3C2400_GPG5_IICSDA   (0x03 << 10)
-#define S3C2410_GPG5_SPIMISO1 (0x03 << 10)
+#define S3C2410_GPG5_SPIMISO1 (0x03 << 10)	/* not s3c2443 */
 
 #define S3C2410_GPG6          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
 #define S3C2410_GPG6_INP      (0x00 << 12)
@@ -845,6 +867,7 @@
 #define S3C2410_GPG11_OUTP    (0x01 << 22)
 #define S3C2410_GPG11_EINT19  (0x02 << 22)
 #define S3C2410_GPG11_TCLK1   (0x03 << 22)
+#define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
 
 #define S3C2410_GPG12         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
 #define S3C2410_GPG12_INP     (0x00 << 24)
@@ -852,25 +875,28 @@
 #define S3C2410_GPG12_EINT20  (0x02 << 24)
 #define S3C2410_GPG12_XMON    (0x03 << 24)
 #define S3C2442_GPG12_nSPICS0 (0x03 << 24)
+#define S3C2443_GPG12_nINPACK (0x03 << 24)
 
 #define S3C2410_GPG13         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
 #define S3C2410_GPG13_INP     (0x00 << 26)
 #define S3C2410_GPG13_OUTP    (0x01 << 26)
 #define S3C2410_GPG13_EINT21  (0x02 << 26)
 #define S3C2410_GPG13_nXPON   (0x03 << 26)
+#define S3C2443_GPG13_CF_nREG (0x03 << 26)
 
 #define S3C2410_GPG14         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
 #define S3C2410_GPG14_INP     (0x00 << 28)
 #define S3C2410_GPG14_OUTP    (0x01 << 28)
 #define S3C2410_GPG14_EINT22  (0x02 << 28)
 #define S3C2410_GPG14_YMON    (0x03 << 28)
+#define S3C2443_GPG14_CF_RESET (0x03 << 28)
 
 #define S3C2410_GPG15         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
 #define S3C2410_GPG15_INP     (0x00 << 30)
 #define S3C2410_GPG15_OUTP    (0x01 << 30)
 #define S3C2410_GPG15_EINT23  (0x02 << 30)
 #define S3C2410_GPG15_nYPON   (0x03 << 30)
-
+#define S3C2443_GPG15_CF_PWR  (0x03 << 30)
 
 #define S3C2410_GPG_PUPDIS(x)  (1<<(x))
 
-- 
cgit v1.1


From 092651c5a988ffca98ee26bbb42688fbfd448718 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 15 Feb 2007 12:57:20 +0100
Subject: [ARM] 4195/1: S3C2443: include/asm-arm/arch-s3c2410/regs-serial.h
 updates

Updates for regs-serial.h for S3C2443

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-s3c2410/regs-serial.h | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/include/asm-arm/arch-s3c2410/regs-serial.h b/include/asm-arm/arch-s3c2410/regs-serial.h
index 46f5240..8946702 100644
--- a/include/asm-arm/arch-s3c2410/regs-serial.h
+++ b/include/asm-arm/arch-s3c2410/regs-serial.h
@@ -35,10 +35,12 @@
 #define S3C24XX_VA_UART0      (S3C24XX_VA_UART)
 #define S3C24XX_VA_UART1      (S3C24XX_VA_UART + 0x4000 )
 #define S3C24XX_VA_UART2      (S3C24XX_VA_UART + 0x8000 )
+#define S3C24XX_VA_UART3      (S3C24XX_VA_UART + 0xC000 )
 
 #define S3C2410_PA_UART0      (S3C24XX_PA_UART)
 #define S3C2410_PA_UART1      (S3C24XX_PA_UART + 0x4000 )
 #define S3C2410_PA_UART2      (S3C24XX_PA_UART + 0x8000 )
+#define S3C2443_PA_UART3      (S3C24XX_PA_UART + 0xC000 )
 
 #define S3C2410_URXH	  (0x24)
 #define S3C2410_UTXH	  (0x20)
@@ -73,6 +75,8 @@
 #define S3C2440_UCON_UCLK	  (1<<10)
 #define S3C2440_UCON_PCLK2	  (2<<10)
 #define S3C2440_UCON_FCLK	  (3<<10)
+#define S3C2443_UCON_EPLL	  (3<<10)
+
 #define S3C2440_UCON2_FCLK_EN	  (1<<15)
 #define S3C2440_UCON0_DIVMASK	  (15 << 12)
 #define S3C2440_UCON1_DIVMASK	  (15 << 12)
@@ -93,6 +97,8 @@
 #define S3C2410_UCON_TXIRQMODE	  (1<<2)
 #define S3C2410_UCON_RXIRQMODE	  (1<<0)
 #define S3C2410_UCON_RXFIFO_TOI	  (1<<7)
+#define S3C2443_UCON_RXERR_IRQEN  (1<<6)
+#define S3C2443_UCON_LOOPBACK	  (1<<5)
 
 #define S3C2410_UCON_DEFAULT	  (S3C2410_UCON_TXILEVEL  | \
 				   S3C2410_UCON_RXILEVEL  | \
@@ -127,7 +133,7 @@
 #define	S3C2410_UMCOM_AFC	  (1<<4)
 #define	S3C2410_UMCOM_RTS_LOW	  (1<<0)
 
-#define S3C2412_UMCON_AFC_63	(0<<5)
+#define S3C2412_UMCON_AFC_63	(0<<5)		/* same as s3c2443 */
 #define S3C2412_UMCON_AFC_56	(1<<5)
 #define S3C2412_UMCON_AFC_48	(2<<5)
 #define S3C2412_UMCON_AFC_40	(3<<5)
@@ -143,6 +149,7 @@
 #define S3C2410_UFSTAT_RXMASK	  (15<<0)
 #define S3C2410_UFSTAT_RXSHIFT	  (0)
 
+/* UFSTAT S3C2443 same as S3C2440 */
 #define S3C2440_UFSTAT_TXFULL	  (1<<14)
 #define S3C2440_UFSTAT_RXFULL	  (1<<6)
 #define S3C2440_UFSTAT_TXSHIFT	  (8)
@@ -157,6 +164,8 @@
 #define S3C2410_UERSTAT_OVERRUN	  (1<<0)
 #define S3C2410_UERSTAT_FRAME	  (1<<2)
 #define S3C2410_UERSTAT_BREAK	  (1<<3)
+#define S3C2443_UERSTAT_PARITY	  (1<<1)
+
 #define S3C2410_UERSTAT_ANY	  (S3C2410_UERSTAT_OVERRUN | \
 				   S3C2410_UERSTAT_FRAME | \
 				   S3C2410_UERSTAT_BREAK)
@@ -164,6 +173,8 @@
 #define S3C2410_UMSTAT_CTS	  (1<<0)
 #define S3C2410_UMSTAT_DeltaCTS	  (1<<2)
 
+#define S3C2443_DIVSLOT		  (0x2C)
+
 #ifndef __ASSEMBLY__
 
 /* struct s3c24xx_uart_clksrc
-- 
cgit v1.1


From e9316f9be6bc7cf949a89df6162e25e7fbb867be Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 15 Feb 2007 16:28:11 +0100
Subject: [ARM] 4196/1: S3C24XX: add S3C2410_IRQSUB() to define IRQ for
 sub-sources

Add a define of S3C2410_IRQSUB() to define all
the sources from the IRQSUB register, to make it
easier to work out the datasheet=>irq mappings

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-s3c2410/irqs.h | 33 ++++++++++++++++++---------------
 1 file changed, 18 insertions(+), 15 deletions(-)

diff --git a/include/asm-arm/arch-s3c2410/irqs.h b/include/asm-arm/arch-s3c2410/irqs.h
index 4b7cff4..f28e2d5 100644
--- a/include/asm-arm/arch-s3c2410/irqs.h
+++ b/include/asm-arm/arch-s3c2410/irqs.h
@@ -94,27 +94,30 @@
  * these need to be ordered in number of appearance in the
  * SUBSRC mask register
 */
-#define IRQ_S3CUART_RX0  S3C2410_IRQ(54)   /* 70 */
-#define IRQ_S3CUART_TX0  S3C2410_IRQ(55)   /* 71 */
-#define IRQ_S3CUART_ERR0 S3C2410_IRQ(56)
 
-#define IRQ_S3CUART_RX1  S3C2410_IRQ(57)
-#define IRQ_S3CUART_TX1  S3C2410_IRQ(58)
-#define IRQ_S3CUART_ERR1 S3C2410_IRQ(59)
+#define S3C2410_IRQSUB(x)	S3C2410_IRQ((x)+54)
 
-#define IRQ_S3CUART_RX2  S3C2410_IRQ(60)
-#define IRQ_S3CUART_TX2  S3C2410_IRQ(61)
-#define IRQ_S3CUART_ERR2 S3C2410_IRQ(62)
+#define IRQ_S3CUART_RX0		S3C2410_IRQSUB(0)	/* 70 */
+#define IRQ_S3CUART_TX0		S3C2410_IRQSUB(1)
+#define IRQ_S3CUART_ERR0	S3C2410_IRQSUB(2)
 
-#define IRQ_TC		 S3C2410_IRQ(63)
-#define IRQ_ADC		 S3C2410_IRQ(64)
+#define IRQ_S3CUART_RX1		S3C2410_IRQSUB(3)	/* 73 */
+#define IRQ_S3CUART_TX1		S3C2410_IRQSUB(4)
+#define IRQ_S3CUART_ERR1	S3C2410_IRQSUB(5)
+
+#define IRQ_S3CUART_RX2		S3C2410_IRQSUB(6)	/* 76 */
+#define IRQ_S3CUART_TX2		S3C2410_IRQSUB(7)
+#define IRQ_S3CUART_ERR2	S3C2410_IRQSUB(8)
+
+#define IRQ_TC			S3C2410_IRQSUB(9)
+#define IRQ_ADC			S3C2410_IRQSUB(10)
 
 /* extra irqs for s3c2440 */
 
-#define IRQ_S3C2440_CAM_C	S3C2410_IRQ(65)
-#define IRQ_S3C2440_CAM_P	S3C2410_IRQ(66)
-#define IRQ_S3C2440_WDT		S3C2410_IRQ(67)
-#define IRQ_S3C2440_AC97	S3C2410_IRQ(68)
+#define IRQ_S3C2440_CAM_C	S3C2410_IRQSUB(11)
+#define IRQ_S3C2440_CAM_P	S3C2410_IRQSUB(12)
+#define IRQ_S3C2440_WDT		S3C2410_IRQSUB(13)
+#define IRQ_S3C2440_AC97	S3C2410_IRQSUB(14)
 
 #define NR_IRQS (IRQ_S3C2440_AC97+1)
 
-- 
cgit v1.1


From f7eee89b2a4b4c233acde621005a814da0eb46d6 Mon Sep 17 00:00:00 2001
From: Andrew Victor <andrew@sanpeople.com>
Date: Thu, 15 Feb 2007 08:17:38 +0100
Subject: [ARM] 4192/1: AT91: Support for AT91SAM9XE processors.

Add support for the Atmel AT91SAM9XE range of processors.  These are
basically AT91SAM9260's with different amounts of internal SRAM and
Flash.

We make use of the existing AT91SAM9260 support, but just perform
run-time detection of the size of the internal SRAM.

Original patch from Nicolas Ferre.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/Kconfig              | 17 +++++++++----
 arch/arm/mach-at91/at91sam9260.c        | 42 +++++++++++++++++++++++++++++++--
 include/asm-arm/arch-at91/at91_dbgu.h   | 14 +++++++++++
 include/asm-arm/arch-at91/at91sam9260.h |  4 ++++
 include/asm-arm/arch-at91/cpu.h         | 17 ++++++++++++-
 5 files changed, 87 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 9313888..bf0d962 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -9,7 +9,7 @@ config ARCH_AT91RM9200
 	bool "AT91RM9200"
 
 config ARCH_AT91SAM9260
-	bool "AT91SAM9260"
+	bool "AT91SAM9260 or AT91SAM9XE"
 
 config ARCH_AT91SAM9261
 	bool "AT91SAM9261"
@@ -93,13 +93,22 @@ endif
 
 if ARCH_AT91SAM9260
 
-comment "AT91SAM9260 Board Type"
+comment "AT91SAM9260 Variants"
+
+config ARCH_AT91SAM9260_SAM9XE
+	bool "AT91SAM9XE"
+	depends on ARCH_AT91SAM9260
+	help
+	  Select this if you are using Atmel's AT91SAM9XE System-on-Chip.
+	  They are basicaly AT91SAM9260s with various sizes of embedded Flash.
+
+comment "AT91SAM9260 / AT91SAM9XE Board Type"
 
 config MACH_AT91SAM9260EK
-	bool "Atmel AT91SAM9260-EK Evaluation Kit"
+	bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
 	depends on ARCH_AT91SAM9260
 	help
-	  Select this if you are using Atmel's AT91SAM9260-EK Evaluation Kit.
+	  Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
 
 endif
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 86e3a4c..003c27c 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -14,6 +14,7 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/arch/cpu.h>
 #include <asm/arch/at91sam9260.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_rstc.h>
@@ -27,7 +28,11 @@ static struct map_desc at91sam9260_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
-	}, {
+	}
+};
+
+static struct map_desc at91sam9260_sram_desc[] __initdata = {
+	{
 		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE,
 		.pfn		= __phys_to_pfn(AT91SAM9260_SRAM0_BASE),
 		.length		= AT91SAM9260_SRAM0_SIZE,
@@ -37,7 +42,14 @@ static struct map_desc at91sam9260_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(AT91SAM9260_SRAM1_BASE),
 		.length		= AT91SAM9260_SRAM1_SIZE,
 		.type		= MT_DEVICE,
-	},
+	}
+};
+
+static struct map_desc at91sam9xe_sram_desc[] __initdata = {
+	{
+		.pfn		= __phys_to_pfn(AT91SAM9XE_SRAM_BASE),
+		.type		= MT_DEVICE,
+	}
 };
 
 /* --------------------------------------------------------------------
@@ -255,11 +267,37 @@ static void at91sam9260_reset(void)
  *  AT91SAM9260 processor initialization
  * -------------------------------------------------------------------- */
 
+static void __init at91sam9xe_initialize(void)
+{
+	unsigned long cidr, sram_size;
+
+	cidr = at91_sys_read(AT91_DBGU_CIDR);
+
+	switch (cidr & AT91_CIDR_SRAMSIZ) {
+		case AT91_CIDR_SRAMSIZ_32K:
+			sram_size = 2 * SZ_16K;
+			break;
+		case AT91_CIDR_SRAMSIZ_16K:
+		default:
+			sram_size = SZ_16K;
+	}
+
+	at91sam9xe_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size;
+	at91sam9xe_sram_desc->length = sram_size;
+
+	iotable_init(at91sam9xe_sram_desc, ARRAY_SIZE(at91sam9xe_sram_desc));
+}
+
 void __init at91sam9260_initialize(unsigned long main_clock)
 {
 	/* Map peripherals */
 	iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc));
 
+	if (cpu_is_at91sam9xe())
+		at91sam9xe_initialize();
+	else
+		iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc));
+
 	at91_arch_reset = at91sam9260_reset;
 	at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
 			| (1 << AT91SAM9260_ID_IRQ2);
diff --git a/include/asm-arm/arch-at91/at91_dbgu.h b/include/asm-arm/arch-at91/at91_dbgu.h
index 1002a80..b0369e1 100644
--- a/include/asm-arm/arch-at91/at91_dbgu.h
+++ b/include/asm-arm/arch-at91/at91_dbgu.h
@@ -35,6 +35,20 @@
 #define		AT91_CIDR_NVPSIZ	(0xf  << 8)		/* Nonvolatile Program Memory Size */
 #define		AT91_CIDR_NVPSIZ2	(0xf  << 12)		/* Second Nonvolatile Program Memory Size */
 #define		AT91_CIDR_SRAMSIZ	(0xf  << 16)		/* Internal SRAM Size */
+#define			AT91_CIDR_SRAMSIZ_1K	(1 << 16)
+#define			AT91_CIDR_SRAMSIZ_2K	(2 << 16)
+#define			AT91_CIDR_SRAMSIZ_112K	(4 << 16)
+#define			AT91_CIDR_SRAMSIZ_4K	(5 << 16)
+#define			AT91_CIDR_SRAMSIZ_80K	(6 << 16)
+#define			AT91_CIDR_SRAMSIZ_160K	(7 << 16)
+#define			AT91_CIDR_SRAMSIZ_8K	(8 << 16)
+#define			AT91_CIDR_SRAMSIZ_16K	(9 << 16)
+#define			AT91_CIDR_SRAMSIZ_32K	(10 << 16)
+#define			AT91_CIDR_SRAMSIZ_64K	(11 << 16)
+#define			AT91_CIDR_SRAMSIZ_128K	(12 << 16)
+#define			AT91_CIDR_SRAMSIZ_256K	(13 << 16)
+#define			AT91_CIDR_SRAMSIZ_96K	(14 << 16)
+#define			AT91_CIDR_SRAMSIZ_512K	(15 << 16)
 #define		AT91_CIDR_ARCH		(0xff << 20)		/* Architecture Identifier */
 #define		AT91_CIDR_NVPTYP	(7    << 28)		/* Nonvolatile Program Memory Type */
 #define		AT91_CIDR_EXT		(1    << 31)		/* Extension Flag */
diff --git a/include/asm-arm/arch-at91/at91sam9260.h b/include/asm-arm/arch-at91/at91sam9260.h
index 73d93ae..2cadebc 100644
--- a/include/asm-arm/arch-at91/at91sam9260.h
+++ b/include/asm-arm/arch-at91/at91sam9260.h
@@ -113,6 +113,10 @@
 
 #define AT91SAM9260_UHP_BASE	0x00500000	/* USB Host controller */
 
+#define AT91SAM9XE_FLASH_BASE	0x00200000	/* Internal FLASH base address */
+#define AT91SAM9XE_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+
+
 #if 0
 /*
  * PIO pin definitions (peripheral A/B multiplexing).
diff --git a/include/asm-arm/arch-at91/cpu.h b/include/asm-arm/arch-at91/cpu.h
index 9efde0d..d464ca5 100644
--- a/include/asm-arm/arch-at91/cpu.h
+++ b/include/asm-arm/arch-at91/cpu.h
@@ -22,6 +22,9 @@
 #define ARCH_ID_AT91SAM9261	0x019703a0
 #define ARCH_ID_AT91SAM9263	0x019607a0
 
+#define ARCH_ID_AT91SAM9XE128	0x329973a0
+#define ARCH_ID_AT91SAM9XE256	0x329a93a0
+#define ARCH_ID_AT91SAM9XE512	0x329aa3a0
 
 static inline unsigned long at91_cpu_identify(void)
 {
@@ -29,6 +32,16 @@ static inline unsigned long at91_cpu_identify(void)
 }
 
 
+#define ARCH_FAMILY_AT91X92	0x09200000
+#define ARCH_FAMILY_AT91SAM9	0x01900000
+#define ARCH_FAMILY_AT91SAM9XE	0x02900000
+
+static inline unsigned long at91_arch_identify(void)
+{
+	return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH);
+}
+
+
 #ifdef CONFIG_ARCH_AT91RM9200
 #define cpu_is_at91rm9200()	(at91_cpu_identify() == ARCH_ID_AT91RM9200)
 #else
@@ -36,8 +49,10 @@ static inline unsigned long at91_cpu_identify(void)
 #endif
 
 #ifdef CONFIG_ARCH_AT91SAM9260
-#define cpu_is_at91sam9260()	(at91_cpu_identify() == ARCH_ID_AT91SAM9260)
+#define cpu_is_at91sam9xe()	(at91_arch_identify() == ARCH_FAMILY_AT91SAM9XE)
+#define cpu_is_at91sam9260()	((at91_cpu_identify() == ARCH_ID_AT91SAM9260) || cpu_is_at91sam9xe())
 #else
+#define cpu_is_at91sam9xe()	(0)
 #define cpu_is_at91sam9260()	(0)
 #endif
 
-- 
cgit v1.1


From 17908ed715e63a02484838b5456fb3fdbd1dfed6 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 15 Feb 2007 16:35:51 +0100
Subject: [ARM] 4197/1: S3C2443: IRQ number updates

Update IRQ numbers for S3C2443

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-s3c2410/irqs.h | 43 +++++++++++++++++++++++++++++++------
 1 file changed, 37 insertions(+), 6 deletions(-)

diff --git a/include/asm-arm/arch-s3c2410/irqs.h b/include/asm-arm/arch-s3c2410/irqs.h
index f28e2d5..c79cb18 100644
--- a/include/asm-arm/arch-s3c2410/irqs.h
+++ b/include/asm-arm/arch-s3c2410/irqs.h
@@ -34,10 +34,10 @@
 #define IRQ_EINT4t7    S3C2410_IRQ(4)	    /* 20 */
 #define IRQ_EINT8t23   S3C2410_IRQ(5)
 #define IRQ_RESERVED6  S3C2410_IRQ(6)	    /* for s3c2410 */
-#define IRQ_CAM        S3C2410_IRQ(6)	    /* for s3c2440 */
+#define IRQ_CAM        S3C2410_IRQ(6)	    /* for s3c2440,s3c2443 */
 #define IRQ_BATT_FLT   S3C2410_IRQ(7)
 #define IRQ_TICK       S3C2410_IRQ(8)	    /* 24 */
-#define IRQ_WDT	       S3C2410_IRQ(9)
+#define IRQ_WDT	       S3C2410_IRQ(9)	    /* WDT/AC97 for s3c2443 */
 #define IRQ_TIMER0     S3C2410_IRQ(10)
 #define IRQ_TIMER1     S3C2410_IRQ(11)
 #define IRQ_TIMER2     S3C2410_IRQ(12)
@@ -45,7 +45,7 @@
 #define IRQ_TIMER4     S3C2410_IRQ(14)
 #define IRQ_UART2      S3C2410_IRQ(15)
 #define IRQ_LCD	       S3C2410_IRQ(16)	    /* 32 */
-#define IRQ_DMA0       S3C2410_IRQ(17)
+#define IRQ_DMA0       S3C2410_IRQ(17)	    /* IRQ_DMA for s3c2443 */
 #define IRQ_DMA1       S3C2410_IRQ(18)
 #define IRQ_DMA2       S3C2410_IRQ(19)
 #define IRQ_DMA3       S3C2410_IRQ(20)
@@ -114,12 +114,43 @@
 
 /* extra irqs for s3c2440 */
 
-#define IRQ_S3C2440_CAM_C	S3C2410_IRQSUB(11)
-#define IRQ_S3C2440_CAM_P	S3C2410_IRQSUB(12)
+#define IRQ_S3C2440_CAM_C	S3C2410_IRQSUB(11)	/* S3C2443 too */
+#define IRQ_S3C2440_CAM_P	S3C2410_IRQSUB(12)	/* S3C2443 too */
 #define IRQ_S3C2440_WDT		S3C2410_IRQSUB(13)
 #define IRQ_S3C2440_AC97	S3C2410_IRQSUB(14)
 
+/* irqs for s3c2443 */
+
+#define IRQ_S3C2443_DMA		S3C2410_IRQ(17)		/* IRQ_DMA1 */
+#define IRQ_S3C2443_UART3	S3C2410_IRQ(18)		/* IRQ_DMA2 */
+#define IRQ_S3C2443_CFCON	S3C2410_IRQ(19)		/* IRQ_DMA3 */
+#define IRQ_S3C2443_SDI1	S3C2410_IRQ(20)		/* IRQ_SDI */
+#define IRQ_S3C2443_NAND	S3C2410_IRQ(24)		/* reserved */
+
+#define IRQ_S3C2443_LCD1	S3C2410_IRQSUB(14)
+#define IRQ_S3C2443_LCD2	S3C2410_IRQSUB(15)
+#define IRQ_S3C2443_LCD3	S3C2410_IRQSUB(16)
+#define IRQ_S3C2443_LCD4	S3C2410_IRQSUB(17)
+
+#define IRQ_S3C2443_DMA0	S3C2410_IRQSUB(18)
+#define IRQ_S3C2443_DMA1	S3C2410_IRQSUB(19)
+#define IRQ_S3C2443_DMA2	S3C2410_IRQSUB(20)
+#define IRQ_S3C2443_DMA3	S3C2410_IRQSUB(21)
+#define IRQ_S3C2443_DMA4	S3C2410_IRQSUB(22)
+#define IRQ_S3C2443_DMA5	S3C2410_IRQSUB(23)
+
+/* UART3 */
+#define IRQ_S3C2443_RX3		S3C2410_IRQSUB(24)
+#define IRQ_S3C2443_TX3		S3C2410_IRQSUB(25)
+#define IRQ_S3C2443_ERR3	S3C2410_IRQSUB(26)
+
+#define IRQ_S3C2443_WDT		S3C2410_IRQSUB(27)
+#define IRQ_S3C2443_AC97	S3C2410_IRQSUB(28)
+
+#ifdef CONFIG_CPU_S3C2443
+#define NR_IRQS (IRQ_S3C2443_AC97+1)
+#else
 #define NR_IRQS (IRQ_S3C2440_AC97+1)
-
+#endif
 
 #endif /* __ASM_ARCH_IRQ_H */
-- 
cgit v1.1


From e4d06e39530559513c7e335ef7ca4675f8146220 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 16 Feb 2007 12:12:31 +0100
Subject: [ARM] 4198/2: S3C2443: arch/arm/mach-s3c2443 and related support

Add arch/arm/mach-s3c2443 for support of the Samsung S3C2443 SoC

This patch adds the core CPU support, clock framework, times
and initial IRQ support, as well as adding the directory into
the build tree.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                       |    3 +-
 arch/arm/Makefile                      |    1 +
 arch/arm/mach-s3c2443/Kconfig          |   18 +
 arch/arm/mach-s3c2443/Makefile         |   16 +
 arch/arm/mach-s3c2443/clock.c          | 1007 ++++++++++++++++++++++++++++++++
 arch/arm/mach-s3c2443/irq.c            |  130 +++++
 arch/arm/mach-s3c2443/s3c2443.c        |   87 +++
 arch/arm/plat-s3c24xx/cpu.c            |   11 +
 arch/arm/plat-s3c24xx/s3c244x.c        |    2 +-
 include/asm-arm/plat-s3c24xx/cpu.h     |    1 +
 include/asm-arm/plat-s3c24xx/s3c2443.h |   32 +
 11 files changed, 1306 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-s3c2443/Kconfig
 create mode 100644 arch/arm/mach-s3c2443/Makefile
 create mode 100644 arch/arm/mach-s3c2443/clock.c
 create mode 100644 arch/arm/mach-s3c2443/irq.c
 create mode 100644 arch/arm/mach-s3c2443/s3c2443.c
 create mode 100644 include/asm-arm/plat-s3c24xx/s3c2443.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 51ee13e..0f711c4 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -303,7 +303,7 @@ config ARCH_SA1100
 	  Support for StrongARM 11x0 based boards.
 
 config ARCH_S3C2410
-	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442"
+	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
 	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -371,6 +371,7 @@ source "arch/arm/mach-s3c2410/Kconfig"
 source "arch/arm/mach-s3c2412/Kconfig"
 source "arch/arm/mach-s3c2440/Kconfig"
 source "arch/arm/mach-s3c2442/Kconfig"
+source "arch/arm/mach-s3c2443/Kconfig"
 endif
 
 source "arch/arm/mach-lh7a40x/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 2df1ea0..93e4747 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -165,6 +165,7 @@ core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2400/
 core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2412/
 core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2440/
 core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2442/
+core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2443/
 core-$(CONFIG_FPE_NWFPE)	+= arch/arm/nwfpe/
 core-$(CONFIG_FPE_FASTFPE)	+= $(FASTFPE_OBJ)
 core-$(CONFIG_VFP)		+= arch/arm/vfp/
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
new file mode 100644
index 0000000..0d8d7bf
--- /dev/null
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -0,0 +1,18 @@
+# arch/arm/mach-s3c2443/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config CPU_S3C2443
+	bool
+	depends on ARCH_S3C2410
+	select S3C2443_PM if PM
+	select S3C2443_DMA if S3C2410_DMA
+	help
+	  Support for the S3C2443 SoC from the S3C24XX line
+
+menu "S3C2443 Machines"
+
+endmenu
+
diff --git a/arch/arm/mach-s3c2443/Makefile b/arch/arm/mach-s3c2443/Makefile
new file mode 100644
index 0000000..397475a
--- /dev/null
+++ b/arch/arm/mach-s3c2443/Makefile
@@ -0,0 +1,16 @@
+# arch/arm/mach-s3c2443/Makefile
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+obj-$(CONFIG_CPU_S3C2443)	+= s3c2443.o
+obj-$(CONFIG_CPU_S3C2443)	+= irq.o
+obj-$(CONFIG_CPU_S3C2443)	+= clock.o
+
+# Machine support
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
new file mode 100644
index 0000000..dd2272f
--- /dev/null
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -0,0 +1,1007 @@
+/* linux/arch/arm/mach-s3c2443/clock.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2443 Clock control support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/map.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-s3c2443-clock.h>
+
+#include <asm/plat-s3c24xx/s3c2443.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+/* We currently have to assume that the system is running
+ * from the XTPll input, and that all ***REFCLKs are being
+ * fed from it, as we cannot read the state of OM[4] from
+ * software.
+ *
+ * It would be possible for each board initialisation to
+ * set the correct muxing at initialisation
+*/
+
+static int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
+{
+	unsigned int clocks = clk->ctrlbit;
+	unsigned long clkcon;
+
+	clkcon = __raw_readl(S3C2443_HCLKCON);
+
+	if (enable)
+		clkcon |= clocks;
+	else
+		clkcon &= ~clocks;
+
+	__raw_writel(clkcon, S3C2443_HCLKCON);
+
+	return 0;
+}
+
+static int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
+{
+	unsigned int clocks = clk->ctrlbit;
+	unsigned long clkcon;
+
+	clkcon = __raw_readl(S3C2443_PCLKCON);
+
+	if (enable)
+		clkcon |= clocks;
+	else
+		clkcon &= ~clocks;
+
+	__raw_writel(clkcon, S3C2443_HCLKCON);
+
+	return 0;
+}
+
+static int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
+{
+	unsigned int clocks = clk->ctrlbit;
+	unsigned long clkcon;
+
+	clkcon = __raw_readl(S3C2443_SCLKCON);
+
+	if (enable)
+		clkcon |= clocks;
+	else
+		clkcon &= ~clocks;
+
+	__raw_writel(clkcon, S3C2443_SCLKCON);
+
+	return 0;
+}
+
+static unsigned long s3c2443_roundrate_clksrc(struct clk *clk,
+					      unsigned long rate,
+					      unsigned int max)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	int div;
+
+	if (rate > parent_rate)
+		return parent_rate;
+
+	/* note, we remove the +/- 1 calculations as they cancel out */
+
+	div = (rate / parent_rate);
+
+	if (div < 1)
+		div = 1;
+	else if (div > max)
+		div = max;
+
+	return parent_rate / div;
+}
+
+static unsigned long s3c2443_roundrate_clksrc4(struct clk *clk,
+					       unsigned long rate)
+{
+	return s3c2443_roundrate_clksrc(clk, rate, 4);
+}
+
+static unsigned long s3c2443_roundrate_clksrc16(struct clk *clk,
+						unsigned long rate)
+{
+	return s3c2443_roundrate_clksrc(clk, rate, 16);
+}
+
+static unsigned long s3c2443_roundrate_clksrc256(struct clk *clk,
+						 unsigned long rate)
+{
+	return s3c2443_roundrate_clksrc(clk, rate, 256);
+}
+
+/* clock selections */
+
+/* CPU EXTCLK input */
+static struct clk clk_ext = {
+	.name		= "ext",
+	.id		= -1,
+};
+
+static struct clk clk_mpllref = {
+	.name		= "mpllref",
+	.parent		= &clk_xtal,
+	.id		= -1,
+};
+
+#if 0
+static struct clk clk_mpll = {
+	.name		= "mpll",
+	.parent		= &clk_mpllref,
+	.id		= -1,
+};
+#endif
+
+static struct clk clk_epllref;
+
+static struct clk clk_epll = {
+	.name		= "epll",
+	.parent		= &clk_epllref,
+	.id		= -1,
+};
+
+static struct clk clk_i2s_ext = {
+	.name		= "i2s-ext",
+	.id		= -1,
+};
+
+static int s3c2443_setparent_epllref(struct clk *clk, struct clk *parent)
+{
+	unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+
+	clksrc &= ~S3C2443_CLKSRC_EPLLREF_MASK;
+
+	if (parent == &clk_xtal)
+		clksrc |= S3C2443_CLKSRC_EPLLREF_XTAL;
+	else if (parent == &clk_ext)
+		clksrc |= S3C2443_CLKSRC_EPLLREF_EXTCLK;
+	else if (parent != &clk_mpllref)
+		return -EINVAL;
+
+	__raw_writel(clksrc, S3C2443_CLKSRC);
+	clk->parent = parent;
+
+	return 0;
+}
+
+static struct clk clk_epllref = {
+	.name		= "epllref",
+	.id		= -1,
+	.set_parent	= s3c2443_setparent_epllref,
+};
+
+static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long div = __raw_readl(S3C2443_CLKDIV0);
+
+	div  &= S3C2443_CLKDIV0_EXTDIV_MASK;
+	div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1);	/* x2 */
+
+	return parent_rate / (div + 1);
+}
+
+static struct clk clk_mdivclk = {
+	.name		= "mdivclk",
+	.parent		= &clk_mpllref,
+	.id		= -1,
+	.get_rate	= s3c2443_getrate_mdivclk,
+};
+
+
+static int s3c2443_setparent_msysclk(struct clk *clk, struct clk *parent)
+{
+	unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+
+	clksrc &= ~(S3C2443_CLKSRC_MSYSCLK_MPLL |
+		    S3C2443_CLKSRC_EXTCLK_DIV);
+
+	if (parent == &clk_mpll)
+		clksrc |= S3C2443_CLKSRC_MSYSCLK_MPLL;
+	else if (parent == &clk_mdivclk)
+		clksrc |= S3C2443_CLKSRC_EXTCLK_DIV;
+	else if (parent != &clk_mpllref)
+		return -EINVAL;
+
+	__raw_writel(clksrc, S3C2443_CLKSRC);
+	clk->parent = parent;
+
+	return 0;
+}
+
+static struct clk clk_msysclk = {
+	.name		= "msysclk",
+	.parent		= &clk_xtal,
+	.id		= -1,
+	.set_parent	= s3c2443_setparent_msysclk,
+};
+
+
+/* esysclk
+ *
+ * this is sourced from either the EPLL or the EPLLref clock
+*/
+
+static int s3c2443_setparent_esysclk(struct clk *clk, struct clk *parent)
+{
+	unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+
+	if (parent == &clk_epll)
+		clksrc |= S3C2443_CLKSRC_ESYSCLK_EPLL;
+	else if (parent == &clk_epllref)
+		clksrc &= ~S3C2443_CLKSRC_ESYSCLK_EPLL;
+	else
+		return -EINVAL;
+
+	__raw_writel(clksrc, S3C2443_CLKSRC);
+	clk->parent = parent;
+
+	return 0;
+}
+
+static struct clk clk_esysclk = {
+	.name		= "esysclk",
+	.parent		= &clk_epll,
+	.id		= -1,
+	.set_parent	= s3c2443_setparent_esysclk,
+};
+
+/* uartclk
+ *
+ * UART baud-rate clock sourced from esysclk via a divisor
+*/
+
+static unsigned long s3c2443_getrate_uart(struct clk *clk)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
+
+	div &= S3C2443_CLKDIV1_UARTDIV_MASK;
+	div >>= S3C2443_CLKDIV1_UARTDIV_SHIFT;
+
+	return parent_rate / (div + 1);
+}
+
+
+static int s3c2443_setrate_uart(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
+
+	rate = s3c2443_roundrate_clksrc16(clk, rate);
+	rate = parent_rate / rate;
+
+	clkdivn &= ~S3C2443_CLKDIV1_UARTDIV_MASK;
+	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_UARTDIV_SHIFT;
+
+	__raw_writel(clkdivn, S3C2443_CLKDIV1);
+	return 0;
+}
+
+static struct clk clk_uart = {
+	.name		= "uartclk",
+	.id		= -1,
+	.parent		= &clk_esysclk,
+	.get_rate	= s3c2443_getrate_uart,
+	.set_rate	= s3c2443_setrate_uart,
+	.round_rate	= s3c2443_roundrate_clksrc16,
+};
+
+/* hsspi
+ *
+ * high-speed spi clock, sourced from esysclk
+*/
+
+static unsigned long s3c2443_getrate_hsspi(struct clk *clk)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
+
+	div &= S3C2443_CLKDIV1_HSSPIDIV_MASK;
+	div >>= S3C2443_CLKDIV1_HSSPIDIV_SHIFT;
+
+	return parent_rate / (div + 1);
+}
+
+
+static int s3c2443_setrate_hsspi(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
+
+	rate = s3c2443_roundrate_clksrc4(clk, rate);
+	rate = parent_rate / rate;
+
+	clkdivn &= ~S3C2443_CLKDIV1_HSSPIDIV_MASK;
+	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_HSSPIDIV_SHIFT;
+
+	__raw_writel(clkdivn, S3C2443_CLKDIV1);
+	return 0;
+}
+
+static struct clk clk_hsspi = {
+	.name		= "hsspi",
+	.id		= -1,
+	.parent		= &clk_esysclk,
+	.ctrlbit	= S3C2443_SCLKCON_HSSPICLK,
+	.enable		= s3c2443_clkcon_enable_s,
+	.get_rate	= s3c2443_getrate_hsspi,
+	.set_rate	= s3c2443_setrate_hsspi,
+	.round_rate	= s3c2443_roundrate_clksrc4,
+};
+
+/* usbhost
+ *
+ * usb host bus-clock, usually 48MHz to provide USB bus clock timing
+*/
+
+static unsigned long s3c2443_getrate_usbhost(struct clk *clk)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
+
+	div &= S3C2443_CLKDIV1_USBHOSTDIV_MASK;
+	div >>= S3C2443_CLKDIV1_USBHOSTDIV_SHIFT;
+
+	return parent_rate / (div + 1);
+}
+
+static int s3c2443_setrate_usbhost(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
+
+	rate = s3c2443_roundrate_clksrc4(clk, rate);
+	rate = parent_rate / rate;
+
+	clkdivn &= ~S3C2443_CLKDIV1_USBHOSTDIV_MASK;
+	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_USBHOSTDIV_SHIFT;
+
+	__raw_writel(clkdivn, S3C2443_CLKDIV1);
+	return 0;
+}
+
+struct clk clk_usb_bus_host = {
+	.name		= "usb-bus-host-parent",
+	.id		= -1,
+	.parent		= &clk_esysclk,
+	.ctrlbit	= S3C2443_SCLKCON_USBHOST,
+	.enable		= s3c2443_clkcon_enable_s,
+	.get_rate	= s3c2443_getrate_usbhost,
+	.set_rate	= s3c2443_setrate_usbhost,
+	.round_rate	= s3c2443_roundrate_clksrc4,
+};
+
+/* clk_hsmcc_div
+ *
+ * this clock is sourced from epll, and is fed through a divider,
+ * to a mux controlled by sclkcon where either it or a extclk can
+ * be fed to the hsmmc block
+*/
+
+static unsigned long s3c2443_getrate_hsmmc_div(struct clk *clk)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
+
+	div &= S3C2443_CLKDIV1_HSMMCDIV_MASK;
+	div >>= S3C2443_CLKDIV1_HSMMCDIV_SHIFT;
+
+	return parent_rate / (div + 1);
+}
+
+static int s3c2443_setrate_hsmmc_div(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
+
+	rate = s3c2443_roundrate_clksrc4(clk, rate);
+	rate = parent_rate / rate;
+
+	clkdivn &= ~S3C2443_CLKDIV1_HSMMCDIV_MASK;
+	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_HSMMCDIV_SHIFT;
+
+	__raw_writel(clkdivn, S3C2443_CLKDIV1);
+	return 0;
+}
+
+static struct clk clk_hsmmc_div = {
+	.name		= "hsmmc-div",
+	.id		= -1,
+	.parent		= &clk_esysclk,
+	.get_rate	= s3c2443_getrate_hsmmc_div,
+	.set_rate	= s3c2443_setrate_hsmmc_div,
+	.round_rate	= s3c2443_roundrate_clksrc4,
+};
+
+static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent)
+{
+	unsigned long clksrc = __raw_readl(S3C2443_SCLKCON);
+
+	clksrc &= ~(S3C2443_SCLKCON_HSMMCCLK_EXT |
+		    S3C2443_SCLKCON_HSMMCCLK_EPLL);
+
+	if (parent == &clk_epll)
+		clksrc |= S3C2443_SCLKCON_HSMMCCLK_EPLL;
+	else if (parent == &clk_ext)
+		clksrc |= S3C2443_SCLKCON_HSMMCCLK_EXT;
+	else
+		return -EINVAL;
+
+	if (clk->usage > 0) {
+		__raw_writel(clksrc, S3C2443_SCLKCON);
+	}
+
+	clk->parent = parent;
+	return 0;
+}
+
+static int s3c2443_enable_hsmmc(struct clk *clk, int enable)
+{
+	return s3c2443_setparent_hsmmc(clk, clk->parent);
+}
+
+static struct clk clk_hsmmc = {
+	.name		= "hsmmc-if",
+	.id		= -1,
+	.parent		= &clk_hsmmc_div,
+	.enable		= s3c2443_enable_hsmmc,
+	.set_parent	= s3c2443_setparent_hsmmc,
+};
+
+/* i2s_eplldiv
+ *
+ * this clock is the output from the i2s divisor of esysclk
+*/
+
+static unsigned long s3c2443_getrate_i2s_eplldiv(struct clk *clk)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
+
+	div &= S3C2443_CLKDIV1_I2SDIV_MASK;
+	div >>= S3C2443_CLKDIV1_I2SDIV_SHIFT;
+
+	return parent_rate / (div + 1);
+}
+
+static int s3c2443_setrate_i2s_eplldiv(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
+
+	rate = s3c2443_roundrate_clksrc16(clk, rate);
+	rate = parent_rate / rate;
+
+	clkdivn &= ~S3C2443_CLKDIV1_I2SDIV_MASK;
+	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_I2SDIV_SHIFT;
+
+	__raw_writel(clkdivn, S3C2443_CLKDIV1);
+	return 0;
+}
+
+static struct clk clk_i2s_eplldiv = {
+	.name		= "i2s-eplldiv",
+	.id		= -1,
+	.parent		= &clk_esysclk,
+	.get_rate	= s3c2443_getrate_i2s_eplldiv,
+	.set_rate	= s3c2443_setrate_i2s_eplldiv,
+	.round_rate	= s3c2443_roundrate_clksrc16,
+};
+
+/* i2s-ref
+ *
+ * i2s bus reference clock, selectable from external, esysclk or epllref
+*/
+
+static int s3c2443_setparent_i2s(struct clk *clk, struct clk *parent)
+{
+	unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+
+	clksrc &= ~S3C2443_CLKSRC_I2S_MASK;
+
+	if (parent == &clk_epllref)
+		clksrc |= S3C2443_CLKSRC_I2S_EPLLREF;
+	else if (parent == &clk_i2s_ext)
+		clksrc |= S3C2443_CLKSRC_I2S_EXT;
+	else if (parent != &clk_i2s_eplldiv)
+		return -EINVAL;
+
+	clk->parent = parent;
+	__raw_writel(clksrc, S3C2443_CLKSRC);
+
+	return 0;
+}
+
+static struct clk clk_i2s = {
+	.name		= "i2s-if",
+	.id		= -1,
+	.parent		= &clk_i2s_eplldiv,
+	.ctrlbit	= S3C2443_SCLKCON_I2SCLK,
+	.enable		= s3c2443_clkcon_enable_s,
+	.set_parent	= s3c2443_setparent_i2s,
+};
+
+/* cam-if
+ *
+ * camera interface bus-clock, divided down from esysclk
+*/
+
+static unsigned long s3c2443_getrate_cam(struct clk *clk)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
+
+	div  &= S3C2443_CLKDIV1_CAMDIV_MASK;
+	div >>= S3C2443_CLKDIV1_CAMDIV_SHIFT;
+
+	return parent_rate / (div + 1);
+}
+
+static int s3c2443_setrate_cam(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long clkdiv1 = __raw_readl(S3C2443_CLKDIV1);
+
+	rate = s3c2443_roundrate_clksrc16(clk, rate);
+	rate = parent_rate / rate;
+
+	clkdiv1 &= ~S3C2443_CLKDIV1_CAMDIV_MASK;
+	clkdiv1 |= (rate - 1) << S3C2443_CLKDIV1_CAMDIV_SHIFT;
+
+	__raw_writel(clkdiv1, S3C2443_CLKDIV1);
+	return 0;
+}
+
+static struct clk clk_cam = {
+	.name		= "camif-upll",		/* same as 2440 name */
+	.id		= -1,
+	.parent		= &clk_esysclk,
+	.ctrlbit	= S3C2443_SCLKCON_CAMCLK,
+	.enable		= s3c2443_clkcon_enable_s,
+	.get_rate	= s3c2443_getrate_cam,
+	.set_rate	= s3c2443_setrate_cam,
+	.round_rate	= s3c2443_roundrate_clksrc16,
+};
+
+/* display-if
+ *
+ * display interface clock, divided from esysclk
+*/
+
+static unsigned long s3c2443_getrate_display(struct clk *clk)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
+
+	div &= S3C2443_CLKDIV1_DISPDIV_MASK;
+	div >>= S3C2443_CLKDIV1_DISPDIV_SHIFT;
+
+	return parent_rate / (div + 1);
+}
+
+static int s3c2443_setrate_display(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
+
+	rate = s3c2443_roundrate_clksrc256(clk, rate);
+	rate = parent_rate / rate;
+
+	clkdivn &= ~S3C2443_CLKDIV1_UARTDIV_MASK;
+	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_UARTDIV_SHIFT;
+
+	__raw_writel(clkdivn, S3C2443_CLKDIV1);
+	return 0;
+}
+
+static struct clk clk_display = {
+	.name		= "display-if",
+	.id		= -1,
+	.parent		= &clk_esysclk,
+	.ctrlbit	= S3C2443_SCLKCON_DISPCLK,
+	.enable		= s3c2443_clkcon_enable_s,
+	.get_rate	= s3c2443_getrate_display,
+	.set_rate	= s3c2443_setrate_display,
+	.round_rate	= s3c2443_roundrate_clksrc256,
+};
+
+/* standard clock definitions */
+
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "nand",
+		.id		= -1,
+		.parent		= &clk_h,
+	}, {
+		.name		= "sdi",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_SDI,
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_ADC,
+	}, {
+		.name		= "i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_IIC,
+	}, {
+		.name		= "iis",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_IIS,
+	}, {
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_SPI0,
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_SPI1,
+	}
+};
+
+static struct clk init_clocks[] = {
+	{
+		.name		= "dma",
+		.id		= 0,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA0,
+	}, {
+		.name		= "dma",
+		.id		= 1,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA1,
+	}, {
+		.name		= "dma",
+		.id		= 2,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA2,
+	}, {
+		.name		= "dma",
+		.id		= 3,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA3,
+	}, {
+		.name		= "dma",
+		.id		= 4,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA4,
+	}, {
+		.name		= "dma",
+		.id		= 5,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA5,
+	}, {
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_LCDC,
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_GPIO,
+	}, {
+		.name		= "usb-host",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_USBH,
+	}, {
+		.name		= "usb-device",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_USBD,
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_PWMT,
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_UART0,
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_UART1,
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_UART2,
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_UART3,
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_RTC,
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_p,
+		.ctrlbit	= S3C2443_PCLKCON_WDT,
+	}, {
+		.name		= "usb-bus-host",
+		.id		= -1,
+		.parent		= &clk_usb_bus_host,
+	}
+};
+
+/* clocks to add where we need to check their parentage */
+
+/* s3c2443_clk_initparents
+ *
+ * Initialise the parents for the clocks that we get at start-time
+*/
+
+static int __init clk_init_set_parent(struct clk *clk, struct clk *parent)
+{
+	printk(KERN_DEBUG "clock %s: parent %s\n", clk->name, parent->name);
+	return clk_set_parent(clk, parent);
+}
+
+static void __init s3c2443_clk_initparents(void)
+{
+	unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+	struct clk *parent;
+
+	switch (clksrc & S3C2443_CLKSRC_EPLLREF_MASK) {
+	case S3C2443_CLKSRC_EPLLREF_EXTCLK:
+		parent = &clk_ext;
+		break;
+
+	case S3C2443_CLKSRC_EPLLREF_XTAL:
+	default:
+		parent = &clk_xtal;
+		break;
+
+	case S3C2443_CLKSRC_EPLLREF_MPLLREF:
+	case S3C2443_CLKSRC_EPLLREF_MPLLREF2:
+		parent = &clk_mpllref;
+		break;
+	}
+
+	clk_init_set_parent(&clk_epllref, parent);
+
+	switch (clksrc & S3C2443_CLKSRC_I2S_MASK) {
+	case S3C2443_CLKSRC_I2S_EXT:
+		parent = &clk_i2s_ext;
+		break;
+
+	case S3C2443_CLKSRC_I2S_EPLLDIV:
+	default:
+		parent = &clk_i2s_eplldiv;
+		break;
+
+	case S3C2443_CLKSRC_I2S_EPLLREF:
+	case S3C2443_CLKSRC_I2S_EPLLREF3:
+		parent = &clk_epllref;
+	}
+
+	clk_init_set_parent(&clk_i2s, &clk_epllref);
+
+	/* esysclk source */
+
+	parent = (clksrc & S3C2443_CLKSRC_ESYSCLK_EPLL) ?
+		&clk_epll : &clk_epllref;
+
+	clk_init_set_parent(&clk_esysclk, parent);
+
+	/* msysclk source */
+
+	if (clksrc & S3C2443_CLKSRC_MSYSCLK_MPLL) {
+		parent = &clk_mpll;
+	} else {
+		parent = (clksrc & S3C2443_CLKSRC_EXTCLK_DIV) ?
+			&clk_mdivclk : &clk_mpllref;
+	}
+
+	clk_init_set_parent(&clk_msysclk, parent);
+}
+
+/* armdiv divisor table */
+
+static unsigned int armdiv[16] = {
+	[S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 1,
+	[S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 2,
+	[S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 3,
+	[S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 4,
+	[S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 6,
+	[S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 8,
+	[S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 12,
+	[S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 16,
+};
+
+static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0)
+{
+	clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
+
+	return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
+}
+
+static inline unsigned long s3c2443_get_prediv(unsigned long clkcon0)
+{
+	clkcon0 &= S3C2443_CLKDIV0_PREDIV_MASK;
+	clkcon0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
+
+	return clkcon0 + 1;
+}
+
+/* clocks to add straight away */
+
+static struct clk *clks[] __initdata = {
+	&clk_ext,
+	&clk_epll,
+	&clk_usb_bus_host,
+	&clk_usb_bus,
+	&clk_esysclk,
+	&clk_epllref,
+	&clk_mpllref,
+	&clk_msysclk,
+	&clk_uart,
+	&clk_display,
+	&clk_cam,
+	&clk_i2s_eplldiv,
+	&clk_i2s,
+	&clk_hsspi,
+	&clk_hsmmc_div,
+	&clk_hsmmc,
+};
+
+void __init s3c2443_init_clocks(int xtal)
+{
+	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
+	unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
+	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
+	unsigned long pll;
+	unsigned long fclk;
+	unsigned long hclk;
+	unsigned long pclk;
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	pll = s3c2443_get_mpll(mpllcon, xtal);
+
+	fclk = pll / s3c2443_fclk_div(clkdiv0);
+	hclk = fclk / s3c2443_get_prediv(clkdiv0);
+	hclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_HCLK) ? 2 : 1);
+ 	pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
+
+	s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
+
+	printk("S3C2443: mpll %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
+	       (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on",
+	       print_mhz(pll), print_mhz(fclk),
+	       print_mhz(hclk), print_mhz(pclk));
+
+	s3c2443_clk_initparents();
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
+		clkp = clks[ptr];
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+	}
+
+	clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
+
+	clk_usb_bus.parent = &clk_usb_bus_host;
+
+	/* ensure usb bus clock is within correct rate of 48MHz */
+
+	if (clk_get_rate(&clk_usb_bus_host) != (48 * 1000 * 1000)) {
+		printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
+		clk_set_rate(&clk_usb_bus_host, 48*1000*1000);
+	}
+
+	printk("S3C2443: epll %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
+	       (epllcon & S3C2443_PLLCON_OFF) ? "off":"on",
+	       print_mhz(clk_get_rate(&clk_epll)),
+	       print_mhz(clk_get_rate(&clk_usb_bus)));
+
+	/* register clocks from clock array */
+
+	clkp = init_clocks;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+	}
+
+	/* We must be careful disabling the clocks we are not intending to
+	 * be using at boot time, as subsytems such as the LCD which do
+	 * their own DMA requests to the bus can cause the system to lockup
+	 * if they where in the middle of requesting bus access.
+	 *
+	 * Disabling the LCD clock if the LCD is active is very dangerous,
+	 * and therefore the bootloader should be careful to not enable
+	 * the LCD clock if it is not needed.
+	*/
+
+	/* install (and disable) the clocks we do not need immediately */
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+
+		(clkp->enable)(clkp, 0);
+	}
+}
diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c
new file mode 100644
index 0000000..f705882
--- /dev/null
+++ b/arch/arm/mach-s3c2443/irq.c
@@ -0,0 +1,130 @@
+/* linux/arch/arm/mach-s3c2443/irq.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/mach/irq.h>
+
+#include <asm/arch/regs-irq.h>
+#include <asm/arch/regs-gpio.h>
+
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
+#include <asm/plat-s3c24xx/irq.h>
+
+/* WDT/AC97 */
+
+static void s3c_irq_demux_wdtac97(unsigned int irq,
+				  struct irq_desc *desc)
+{
+	unsigned int subsrc, submsk;
+	struct irq_desc *mydesc;
+
+	/* read the current pending interrupts, and the mask
+	 * for what it is available */
+
+	subsrc = __raw_readl(S3C2410_SUBSRCPND);
+	submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+	subsrc &= ~submsk;
+	subsrc >>= 27;
+	subsrc &= 3;
+
+	if (subsrc != 0) {
+		if (subsrc & 1) {
+			mydesc = irq_desc + IRQ_S3C2443_WDT;
+			desc_handle_irq(IRQ_S3C2443_WDT, mydesc);
+		}
+		if (subsrc & 2) {
+			mydesc = irq_desc + IRQ_S3C2443_AC97;
+			desc_handle_irq(IRQ_S3C2443_AC97, mydesc);
+		}
+	}
+}
+
+
+#define INTMSK_WDT	 (1UL << (IRQ_WDT - IRQ_EINT0))
+
+static void
+s3c_irq_wdtac97_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_WDT, 3<<27);
+}
+
+static void
+s3c_irq_wdtac97_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_WDT);
+}
+
+static void
+s3c_irq_wdtac97_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_WDT, 3<<27);
+}
+
+static struct irq_chip s3c_irq_wdtac97 = {
+	.mask	    = s3c_irq_wdtac97_mask,
+	.unmask	    = s3c_irq_wdtac97_unmask,
+	.ack	    = s3c_irq_wdtac97_ack,
+};
+
+static int s3c2443_irq_add(struct sys_device *sysdev)
+{
+	unsigned int irqno;
+
+	printk("S3C2443: IRQ Support\n");
+
+	/* add new chained handler for wdt, ac7 */
+
+	set_irq_chip(IRQ_WDT, &s3c_irq_level_chip);
+	set_irq_handler(IRQ_WDT, handle_level_irq);
+	set_irq_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
+
+	for (irqno = IRQ_S3C2443_WDT; irqno <= IRQ_S3C2443_AC97; irqno++) {
+		set_irq_chip(irqno, &s3c_irq_wdtac97);
+		set_irq_handler(irqno, handle_level_irq);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2443_irq_driver = {
+	.add		= s3c2443_irq_add,
+};
+
+static int s3c2443_irq_init(void)
+{
+	return sysdev_driver_register(&s3c2443_sysclass, &s3c2443_irq_driver);
+}
+
+arch_initcall(s3c2443_irq_init);
+
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
new file mode 100644
index 0000000..bc14f77
--- /dev/null
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -0,0 +1,87 @@
+/* linux/arch/arm/mach-s3c2443/s3c2443.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *   Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C2443 Mobile CPU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <asm/arch/regs-serial.h>
+
+#include <asm/plat-s3c24xx/s3c2443.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+static struct map_desc s3c2443_iodesc[] __initdata = {
+	IODESC_ENT(WATCHDOG),
+	IODESC_ENT(CLKPWR),
+	IODESC_ENT(TIMER),
+};
+
+struct sysdev_class s3c2443_sysclass = {
+	set_kset_name("s3c2443-core"),
+};
+
+static struct sys_device s3c2443_sysdev = {
+	.cls		= &s3c2443_sysclass,
+};
+
+int __init s3c2443_init(void)
+{
+	printk("S3C2443: Initialising architecture\n");
+
+	return sysdev_register(&s3c2443_sysdev);
+}
+
+void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
+}
+
+/* s3c2443_map_io
+ *
+ * register the standard cpu IO areas, and any passed in from the
+ * machine specific initialisation.
+ */
+
+void __init s3c2443_map_io(struct map_desc *mach_desc, int mach_size)
+{
+	iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
+	iotable_init(mach_desc, mach_size);
+}
+
+/* need to register class before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2443 based system)
+ * as a driver which may support both 2443 and 2440 may try and use it.
+*/
+
+static int __init s3c2443_core_init(void)
+{
+	return sysdev_class_register(&s3c2443_sysclass);
+}
+
+core_initcall(s3c2443_core_init);
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 2fbb749..6a2d107 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -49,6 +49,7 @@
 #include "s3c244x.h"
 #include <asm/plat-s3c24xx/s3c2440.h>
 #include <asm/plat-s3c24xx/s3c2442.h>
+#include <asm/plat-s3c24xx/s3c2443.h>
 
 struct cpu_table {
 	unsigned long	idcode;
@@ -67,6 +68,7 @@ static const char name_s3c2410[]  = "S3C2410";
 static const char name_s3c2412[]  = "S3C2412";
 static const char name_s3c2440[]  = "S3C2440";
 static const char name_s3c2442[]  = "S3C2442";
+static const char name_s3c2443[]  = "S3C2443";
 static const char name_s3c2410a[] = "S3C2410A";
 static const char name_s3c2440a[] = "S3C2440A";
 
@@ -135,6 +137,15 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.name		= name_s3c2412,
 	},
 	{
+		.idcode		= 0x32443001,
+		.idmask		= 0xffffffff,
+		.map_io		= s3c2443_map_io,
+		.init_clocks	= s3c2443_init_clocks,
+		.init_uarts	= s3c2443_init_uarts,
+		.init		= s3c2443_init,
+		.name		= name_s3c2443,
+	},
+	{
 		.idcode		= 0x0,   /* S3C2400 doesn't have an idcode */
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2400_map_io,
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
index 87aace4..767f2e9 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -3,7 +3,7 @@
  * Copyright (c) 2004-2006 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
- * Samsung S3C2440 and S3C2442 Mobile CPU support
+ * Samsung S3C2440 and S3C2442 Mobile CPU support (not S3C2443)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/include/asm-arm/plat-s3c24xx/cpu.h b/include/asm-arm/plat-s3c24xx/cpu.h
index 8181b22..15dd188 100644
--- a/include/asm-arm/plat-s3c24xx/cpu.h
+++ b/include/asm-arm/plat-s3c24xx/cpu.h
@@ -67,3 +67,4 @@ extern struct sysdev_class s3c2410_sysclass;
 extern struct sysdev_class s3c2412_sysclass;
 extern struct sysdev_class s3c2440_sysclass;
 extern struct sysdev_class s3c2442_sysclass;
+extern struct sysdev_class s3c2443_sysclass;
diff --git a/include/asm-arm/plat-s3c24xx/s3c2443.h b/include/asm-arm/plat-s3c24xx/s3c2443.h
new file mode 100644
index 0000000..11d83b5
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/s3c2443.h
@@ -0,0 +1,32 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2443 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2443
+
+struct s3c2410_uartcfg;
+
+extern  int s3c2443_init(void);
+
+extern void s3c2443_map_io(struct map_desc *mach_desc, int size);
+
+extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2443_init_clocks(int xtal);
+
+extern  int s3c2443_baseclk_add(void);
+
+#else
+#define s3c2443_init_clocks NULL
+#define s3c2443_init_uarts NULL
+#define s3c2443_map_io NULL
+#define s3c2443_init NULL
+#endif
-- 
cgit v1.1


From 285f4930f239d95cb8d4fdf45a52870d744bed8f Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 15 Feb 2007 16:48:58 +0100
Subject: [ARM] 4199/1: S3C2443: SMDK2443 machine addition

Add support for SMDK2443 to arch/arm/mach-s3c2443

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-s3c2443/Kconfig         |   8 +-
 arch/arm/mach-s3c2443/Makefile        |   2 +
 arch/arm/mach-s3c2443/mach-smdk2443.c | 138 ++++++++++++++++++++++++++++++++++
 3 files changed, 147 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-s3c2443/mach-smdk2443.c

diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
index 0d8d7bf..722bdea 100644
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -14,5 +14,11 @@ config CPU_S3C2443
 
 menu "S3C2443 Machines"
 
-endmenu
+config MACH_SMDK2443
+	bool "SMDK2443"
+	select CPU_S3C2443
+	select MACH_SMDK
+	help
+	  Say Y here if you are using an SMDK2443
 
+endmenu
diff --git a/arch/arm/mach-s3c2443/Makefile b/arch/arm/mach-s3c2443/Makefile
index 397475a..a878076 100644
--- a/arch/arm/mach-s3c2443/Makefile
+++ b/arch/arm/mach-s3c2443/Makefile
@@ -14,3 +14,5 @@ obj-$(CONFIG_CPU_S3C2443)	+= irq.o
 obj-$(CONFIG_CPU_S3C2443)	+= clock.o
 
 # Machine support
+
+obj-$(CONFIG_MACH_SMDK2443)	+= mach-smdk2443.o
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
new file mode 100644
index 0000000..1ac45b8
--- /dev/null
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -0,0 +1,138 @@
+/* linux/arch/arm/mach-s3c2443/mach-smdk2443.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://www.fluff.org/ben/smdk2443/
+ *
+ * Thanks to Samsung for the loan of an SMDK2443
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/hardware/iomd.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-lcd.h>
+
+#include <asm/arch/idle.h>
+#include <asm/arch/fb.h>
+
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2440.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+#include <asm/plat-s3c24xx/common-smdk.h>
+
+static struct map_desc smdk2443_iodesc[] __initdata = {
+	/* ISA IO Space map (memory space selected by A24) */
+
+	{
+		.virtual	= (u32)S3C24XX_VA_ISA_WORD,
+		.pfn		= __phys_to_pfn(S3C2410_CS2),
+		.length		= 0x10000,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (u32)S3C24XX_VA_ISA_WORD + 0x10000,
+		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+		.length		= SZ_4M,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
+		.pfn		= __phys_to_pfn(S3C2410_CS2),
+		.length		= 0x10000,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
+		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+		.length		= SZ_4M,
+		.type		= MT_DEVICE,
+	}
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk2443_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	/* IR port */
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x43,
+		.ufcon	     = 0x51,
+	}
+};
+
+static struct platform_device *smdk2443_devices[] __initdata = {
+	&s3c_device_wdt,
+	&s3c_device_i2c,
+};
+
+static struct s3c24xx_board smdk2443_board __initdata = {
+	.devices       = smdk2443_devices,
+	.devices_count = ARRAY_SIZE(smdk2443_devices)
+};
+
+static void __init smdk2443_map_io(void)
+{
+	s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs));
+	s3c24xx_set_board(&smdk2443_board);
+}
+
+static void __init smdk2443_machine_init(void)
+{
+	smdk_machine_init();
+}
+
+MACHINE_START(SMDK2443, "SMDK2443")
+	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+
+	.init_irq	= s3c24xx_init_irq,
+	.map_io		= smdk2443_map_io,
+	.init_machine	= smdk2443_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
-- 
cgit v1.1


From 5ea22225e222b1a46d095ec3d754de052f6b284a Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 15 Feb 2007 17:32:20 +0100
Subject: [ARM] 4200/1: S3C2443: Update s3c2410_defconfig to add SMDK2443

Add SMDK2443 to s3c2410_defconfig

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/s3c2410_defconfig | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 7c8025b..df19e36 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.20
-# Tue Feb 13 16:43:14 2007
+# Thu Feb 15 11:26:24 2007
 #
 CONFIG_ARM=y
 # CONFIG_GENERIC_TIME is not set
@@ -189,6 +189,12 @@ CONFIG_CPU_S3C2442=y
 # S3C2442 Machines
 #
 CONFIG_SMDK2440_CPU2442=y
+CONFIG_CPU_S3C2443=y
+
+#
+# S3C2443 Machines
+#
+CONFIG_MACH_SMDK2443=y
 
 #
 # Processor Type
-- 
cgit v1.1


From d9c0ebbda522b64607cd2b0064b9bb040c53bcaf Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 15 Feb 2007 22:29:36 +0100
Subject: [ARM] 4203/1: S3C2443: use S3C2412 nand driver

Use the S3C2412 nand driver for the S3C2443 as it
is register compatible.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-s3c2443/s3c2443.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index bc14f77..9b91235 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -53,6 +53,8 @@ int __init s3c2443_init(void)
 {
 	printk("S3C2443: Initialising architecture\n");
 
+	s3c_device_nand.name = "s3c2412-nand";
+
 	return sysdev_register(&s3c2443_sysdev);
 }
 
-- 
cgit v1.1


From d4156d52c7464e8f25a286e1c2975e91bdbc35d6 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 15 Feb 2007 22:52:15 +0100
Subject: [ARM] 4204/1: S3C24XX: add hook to specify cpu reset

Add hook code to specify cpu specific reset call

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-s3c2410/reset.h  | 22 ++++++++++++++++++++++
 include/asm-arm/arch-s3c2410/system.h |  6 +++++-
 2 files changed, 27 insertions(+), 1 deletion(-)
 create mode 100644 include/asm-arm/arch-s3c2410/reset.h

diff --git a/include/asm-arm/arch-s3c2410/reset.h b/include/asm-arm/arch-s3c2410/reset.h
new file mode 100644
index 0000000..4f866cd
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/reset.h
@@ -0,0 +1,22 @@
+/* linux/include/asm-arm/arch-s3c2410/reset.h
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 CPU reset controls
+*/
+
+#ifndef __ASM_ARCH_RESET_H
+#define __ASM_ARCH_RESET_H __FILE__
+
+/* This allows the over-ride of the default reset code
+*/
+
+extern void (*s3c24xx_reset_hook)(void);
+
+#endif /* __ASM_ARCH_RESET_H */
diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h
index 41aeb73..1c74ef1 100644
--- a/include/asm-arm/arch-s3c2410/system.h
+++ b/include/asm-arm/arch-s3c2410/system.h
@@ -15,11 +15,13 @@
 
 #include <asm/arch/map.h>
 #include <asm/arch/idle.h>
+#include <asm/arch/reset.h>
 
 #include <asm/arch/regs-watchdog.h>
 #include <asm/arch/regs-clock.h>
 
 void (*s3c24xx_idle)(void);
+void (*s3c24xx_reset_hook)(void);
 
 void s3c24xx_default_idle(void)
 {
@@ -54,7 +56,6 @@ static void arch_idle(void)
 		s3c24xx_default_idle();
 }
 
-
 static void
 arch_reset(char mode)
 {
@@ -62,6 +63,9 @@ arch_reset(char mode)
 		cpu_reset(0);
 	}
 
+	if (s3c24xx_reset_hook)
+		s3c24xx_reset_hook();
+
 	printk("arch_reset: attempting watchdog reset\n");
 
 	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
-- 
cgit v1.1


From b4f14eb86cda9324a2ffbdf534385d012967acd8 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 15 Feb 2007 22:53:52 +0100
Subject: [ARM] 4205/1: S3C2443: Add cpu specific reset hook

Hook in a cpu specific reset function for the S3C2443

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-s3c2443/s3c2443.c                   | 10 +++++++++-
 include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h |  2 ++
 2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index 9b91235..11b1d0b 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -29,7 +29,8 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-s3c2443-clock.h>
+#include <asm/arch/reset.h>
 
 #include <asm/plat-s3c24xx/s3c2443.h>
 #include <asm/plat-s3c24xx/devs.h>
@@ -49,10 +50,17 @@ static struct sys_device s3c2443_sysdev = {
 	.cls		= &s3c2443_sysclass,
 };
 
+static void s3c2443_hard_reset(void)
+{
+	__raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST);
+}
+
 int __init s3c2443_init(void)
 {
 	printk("S3C2443: Initialising architecture\n");
 
+	s3c24xx_reset_hook = s3c2443_hard_reset;
+
 	s3c_device_nand.name = "s3c2412-nand";
 
 	return sysdev_register(&s3c2443_sysdev);
diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h b/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
index e696554..ff0536d 100644
--- a/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
+++ b/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
@@ -38,6 +38,8 @@
 #define S3C2443_PWRCFG			S3C2443_CLKREG(0x60)
 #define S3C2443_RSTCON			S3C2443_CLKREG(0x64)
 
+#define S3C2443_SWRST_RESET		(0x533c2443)
+
 #define S3C2443_PLLCON_OFF		(1<<24)
 
 #define S3C2443_CLKSRC_I2S_EXT		(1<<14)
-- 
cgit v1.1


From a930609496b39284a93182ec3beb9dc9bf3651ec Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 16 Feb 2007 00:17:07 +0100
Subject: [ARM] 4206/1: SMDK2440: Fix lcd type in platform data

Set the LCD display type field in the platform data
so that the LCD driver initialise the display as an
TFT display

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-s3c2440/mach-smdk2440.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index 270e42b..7e7d440 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -144,6 +144,7 @@ static struct s3c2410fb_mach_info smdk2440_lcd_cfg __initdata = {
 #endif
 
 	.lpcsel		= ((0xCE6) & ~7) | 1<<4,
+	.type		= S3C2410_LCDCON1_TFT16BPP,
 
 	.width		= 240,
 	.height		= 320,
-- 
cgit v1.1


From 90bc8566fb40b12167b49d972c85d2e509eea55f Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 16 Feb 2007 12:54:15 +0100
Subject: [ARM] 4209/1: S3C24XX: remove unnecessary includes of iomd.h

Machines in the S3C24XX architectures should not
be including <asm/hardware/iomd.h> as this is not
needed.

Also remove commented out includes

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-s3c2410/mach-h1940.c    | 2 --
 arch/arm/mach-s3c2410/mach-n30.c      | 1 -
 arch/arm/mach-s3c2412/mach-vstms.c    | 1 -
 arch/arm/mach-s3c2440/mach-rx3715.c   | 1 -
 arch/arm/mach-s3c2440/mach-smdk2440.c | 2 --
 arch/arm/mach-s3c2443/mach-smdk2443.c | 1 -
 6 files changed, 8 deletions(-)

diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 2b495b7..01c60d0 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -25,12 +25,10 @@
 #include <asm/mach/irq.h>
 
 #include <asm/hardware.h>
-#include <asm/hardware/iomd.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-
 #include <asm/arch/regs-serial.h>
 #include <asm/arch/regs-lcd.h>
 #include <asm/arch/regs-gpio.h>
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index dbac731..261aa4c 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -29,7 +29,6 @@
 #include <asm/mach/irq.h>
 
 #include <asm/hardware.h>
-#include <asm/hardware/iomd.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index f1afb70..4231b54 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -28,7 +28,6 @@
 #include <asm/mach/irq.h>
 
 #include <asm/hardware.h>
-#include <asm/hardware/iomd.h>
 #include <asm/setup.h>
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index 1d4e19b..480ccde 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -33,7 +33,6 @@
 #include <asm/mach/irq.h>
 
 #include <asm/hardware.h>
-#include <asm/hardware/iomd.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index 7e7d440..c17eb5b 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -27,12 +27,10 @@
 #include <asm/mach/irq.h>
 
 #include <asm/hardware.h>
-#include <asm/hardware/iomd.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-//#include <asm/debug-ll.h>
 #include <asm/arch/regs-serial.h>
 #include <asm/arch/regs-gpio.h>
 #include <asm/arch/regs-lcd.h>
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index 1ac45b8..e82aaff 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -27,7 +27,6 @@
 #include <asm/mach/irq.h>
 
 #include <asm/hardware.h>
-#include <asm/hardware/iomd.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-- 
cgit v1.1


From 72262e8b19034d2605d452d91717d56738598707 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 16 Feb 2007 13:02:42 +0100
Subject: [ARM] 4202/2: S3C2443: IRQ sub source handlers

Add IRQ handlers for the IRQs which originate
from the sub-interrupt register on the S3C2443

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-s3c2443/irq.c | 238 ++++++++++++++++++++++++++++++++++++--------
 1 file changed, 199 insertions(+), 39 deletions(-)

diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c
index f705882..7a45b6d 100644
--- a/arch/arm/mach-s3c2443/irq.c
+++ b/arch/arm/mach-s3c2443/irq.c
@@ -39,12 +39,12 @@
 #include <asm/plat-s3c24xx/pm.h>
 #include <asm/plat-s3c24xx/irq.h>
 
-/* WDT/AC97 */
+#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
 
-static void s3c_irq_demux_wdtac97(unsigned int irq,
-				  struct irq_desc *desc)
+static inline void s3c2443_irq_demux(unsigned int irq, unsigned int len)
 {
 	unsigned int subsrc, submsk;
+	unsigned int end;
 	struct irq_desc *mydesc;
 
 	/* read the current pending interrupts, and the mask
@@ -53,63 +53,199 @@ static void s3c_irq_demux_wdtac97(unsigned int irq,
 	subsrc = __raw_readl(S3C2410_SUBSRCPND);
 	submsk = __raw_readl(S3C2410_INTSUBMSK);
 
-	subsrc &= ~submsk;
-	subsrc >>= 27;
-	subsrc &= 3;
-
-	if (subsrc != 0) {
-		if (subsrc & 1) {
-			mydesc = irq_desc + IRQ_S3C2443_WDT;
-			desc_handle_irq(IRQ_S3C2443_WDT, mydesc);
-		}
-		if (subsrc & 2) {
-			mydesc = irq_desc + IRQ_S3C2443_AC97;
-			desc_handle_irq(IRQ_S3C2443_AC97, mydesc);
-		}
+	subsrc  &= ~submsk;
+	subsrc >>= (irq - S3C2410_IRQSUB(0));
+	subsrc  &= (1 << len)-1;
+
+	end = len + irq;
+	mydesc = irq_desc + irq;
+
+	for (; irq < end && subsrc; irq++) {
+		if (subsrc & 1)
+			desc_handle_irq(irq, mydesc);
+
+		mydesc++;
+		subsrc >>= 1;
 	}
 }
 
+/* WDT/AC97 sub interrupts */
+
+static void s3c2443_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc)
+{
+	s3c2443_irq_demux(IRQ_S3C2443_WDT, 4);
+}
 
-#define INTMSK_WDT	 (1UL << (IRQ_WDT - IRQ_EINT0))
+#define INTMSK_WDTAC97	(1UL << (IRQ_WDT - IRQ_EINT0))
+#define SUBMSK_WDTAC97	INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97)
 
-static void
-s3c_irq_wdtac97_mask(unsigned int irqno)
+static void s3c2443_irq_wdtac97_mask(unsigned int irqno)
 {
-	s3c_irqsub_mask(irqno, INTMSK_WDT, 3<<27);
+	s3c_irqsub_mask(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97);
 }
 
-static void
-s3c_irq_wdtac97_unmask(unsigned int irqno)
+static void s3c2443_irq_wdtac97_unmask(unsigned int irqno)
 {
-	s3c_irqsub_unmask(irqno, INTMSK_WDT);
+	s3c_irqsub_unmask(irqno, INTMSK_WDTAC97);
 }
 
-static void
-s3c_irq_wdtac97_ack(unsigned int irqno)
+static void s3c2443_irq_wdtac97_ack(unsigned int irqno)
 {
-	s3c_irqsub_maskack(irqno, INTMSK_WDT, 3<<27);
+	s3c_irqsub_maskack(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97);
 }
 
-static struct irq_chip s3c_irq_wdtac97 = {
-	.mask	    = s3c_irq_wdtac97_mask,
-	.unmask	    = s3c_irq_wdtac97_unmask,
-	.ack	    = s3c_irq_wdtac97_ack,
+static struct irq_chip s3c2443_irq_wdtac97 = {
+	.mask	    = s3c2443_irq_wdtac97_mask,
+	.unmask	    = s3c2443_irq_wdtac97_unmask,
+	.ack	    = s3c2443_irq_wdtac97_ack,
 };
 
-static int s3c2443_irq_add(struct sys_device *sysdev)
+
+/* LCD sub interrupts */
+
+static void s3c2443_irq_demux_lcd(unsigned int irq, struct irq_desc *desc)
 {
-	unsigned int irqno;
+	s3c2443_irq_demux(IRQ_S3C2443_LCD1, 4);
+}
 
-	printk("S3C2443: IRQ Support\n");
+#define INTMSK_LCD	(1UL << (IRQ_LCD - IRQ_EINT0))
+#define SUBMSK_LCD	INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4)
+
+static void s3c2443_irq_lcd_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_LCD, SUBMSK_LCD);
+}
+
+static void s3c2443_irq_lcd_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_LCD);
+}
+
+static void s3c2443_irq_lcd_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_LCD, SUBMSK_LCD);
+}
+
+static struct irq_chip s3c2443_irq_lcd = {
+	.mask	    = s3c2443_irq_lcd_mask,
+	.unmask	    = s3c2443_irq_lcd_unmask,
+	.ack	    = s3c2443_irq_lcd_ack,
+};
+
+
+/* DMA sub interrupts */
+
+static void s3c2443_irq_demux_dma(unsigned int irq, struct irq_desc *desc)
+{
+	s3c2443_irq_demux(IRQ_S3C2443_DMA1, 6);
+}
+
+#define INTMSK_DMA	(1UL << (IRQ_S3C2443_DMA - IRQ_EINT0))
+#define SUBMSK_DMA	INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5)
+
+
+static void s3c2443_irq_dma_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_DMA, SUBMSK_DMA);
+}
+
+static void s3c2443_irq_dma_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_DMA);
+}
+
+static void s3c2443_irq_dma_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_DMA, SUBMSK_DMA);
+}
+
+static struct irq_chip s3c2443_irq_dma = {
+	.mask	    = s3c2443_irq_dma_mask,
+	.unmask	    = s3c2443_irq_dma_unmask,
+	.ack	    = s3c2443_irq_dma_ack,
+};
+
+
+/* UART3 sub interrupts */
+
+static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
+{
+	s3c2443_irq_demux(IRQ_S3C2443_UART3, 3);
+}
 
-	/* add new chained handler for wdt, ac7 */
+#define INTMSK_UART3	(1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
+#define SUBMSK_UART3	(0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
 
-	set_irq_chip(IRQ_WDT, &s3c_irq_level_chip);
-	set_irq_handler(IRQ_WDT, handle_level_irq);
-	set_irq_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
 
-	for (irqno = IRQ_S3C2443_WDT; irqno <= IRQ_S3C2443_AC97; irqno++) {
-		set_irq_chip(irqno, &s3c_irq_wdtac97);
+static void s3c2443_irq_uart3_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_UART3, SUBMSK_UART3);
+}
+
+static void s3c2443_irq_uart3_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_UART3);
+}
+
+static void s3c2443_irq_uart3_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_UART3, SUBMSK_UART3);
+}
+
+static struct irq_chip s3c2443_irq_uart3 = {
+	.mask	    = s3c2443_irq_uart3_mask,
+	.unmask	    = s3c2443_irq_uart3_unmask,
+	.ack	    = s3c2443_irq_uart3_ack,
+};
+
+
+/* CAM sub interrupts */
+
+static void s3c2443_irq_demux_cam(unsigned int irq, struct irq_desc *desc)
+{
+	s3c2443_irq_demux(IRQ_S3C2440_CAM_C, 4);
+}
+
+#define INTMSK_CAM	(1UL << (IRQ_CAM - IRQ_EINT0))
+#define SUBMSK_CAM	INTMSK(IRQ_S3C2440_CAM_C, IRQ_S3C2440_CAM_P)
+
+static void s3c2443_irq_cam_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_CAM, SUBMSK_CAM);
+}
+
+static void s3c2443_irq_cam_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_CAM);
+}
+
+static void s3c2443_irq_cam_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_CAM, SUBMSK_CAM);
+}
+
+static struct irq_chip s3c2443_irq_cam = {
+	.mask	    = s3c2443_irq_cam_mask,
+	.unmask	    = s3c2443_irq_cam_unmask,
+	.ack	    = s3c2443_irq_cam_ack,
+};
+
+/* IRQ initialisation code */
+
+static int __init s3c2443_add_sub(unsigned int base,
+				   void (*demux)(unsigned int,
+						 struct irq_desc *),
+				   struct irq_chip *chip,
+				   unsigned int start, unsigned int end)
+{
+	unsigned int irqno;
+
+	set_irq_chip(base, &s3c_irq_level_chip);
+	set_irq_handler(base, handle_level_irq);
+	set_irq_chained_handler(base, demux);
+
+	for (irqno = start; irqno <= end; irqno++) {
+		set_irq_chip(irqno, chip);
 		set_irq_handler(irqno, handle_level_irq);
 		set_irq_flags(irqno, IRQF_VALID);
 	}
@@ -117,6 +253,30 @@ static int s3c2443_irq_add(struct sys_device *sysdev)
 	return 0;
 }
 
+static int s3c2443_irq_add(struct sys_device *sysdev)
+{
+	printk("S3C2443: IRQ Support\n");
+
+	s3c2443_add_sub(IRQ_CAM, s3c2443_irq_demux_cam, &s3c2443_irq_cam,
+			IRQ_S3C2440_CAM_C, IRQ_S3C2440_CAM_P);
+
+	s3c2443_add_sub(IRQ_LCD, s3c2443_irq_demux_lcd, &s3c2443_irq_lcd,
+			IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4);
+
+	s3c2443_add_sub(IRQ_S3C2443_DMA, s3c2443_irq_demux_dma,
+			&s3c2443_irq_dma, IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5);
+
+	s3c2443_add_sub(IRQ_S3C2443_UART3, s3c2443_irq_demux_uart3,
+			&s3c2443_irq_uart3,
+			IRQ_S3C2443_RX3, IRQ_S3C2443_ERR3);
+
+	s3c2443_add_sub(IRQ_WDT, s3c2443_irq_demux_wdtac97,
+			&s3c2443_irq_wdtac97,
+			IRQ_S3C2443_WDT, IRQ_S3C2443_AC97);
+
+	return 0;
+}
+
 static struct sysdev_driver s3c2443_irq_driver = {
 	.add		= s3c2443_irq_add,
 };
-- 
cgit v1.1


From f1e1398654eb97269590a5a76f0aedb607fe5d0f Mon Sep 17 00:00:00 2001
From: David Brownell <david-b@pacbell.net>
Date: Fri, 16 Feb 2007 06:36:50 +0100
Subject: [ARM] 4207/1: defconfig fixes, use RTC_DRV_AT91RM9200

When "rtc-at91" was renamed to "rtc-at91rm9200" not all the relevant
defconfig entries were updated.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/ateb9200_defconfig | 2 +-
 arch/arm/configs/csb337_defconfig   | 2 +-
 arch/arm/configs/kafa_defconfig     | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig
index 3de5c64..baa9769 100644
--- a/arch/arm/configs/ateb9200_defconfig
+++ b/arch/arm/configs/ateb9200_defconfig
@@ -1066,7 +1066,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_AT91=y
+CONFIG_RTC_DRV_AT91RM9200=y
 # CONFIG_RTC_DRV_TEST is not set
 
 #
diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig
index 8e55f55..88e5d28 100644
--- a/arch/arm/configs/csb337_defconfig
+++ b/arch/arm/configs/csb337_defconfig
@@ -988,7 +988,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_AT91=y
+CONFIG_RTC_DRV_AT91RM9200=y
 # CONFIG_RTC_DRV_TEST is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig
index a4cdafc..a0f48d5 100644
--- a/arch/arm/configs/kafa_defconfig
+++ b/arch/arm/configs/kafa_defconfig
@@ -718,7 +718,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_AT91=y
+CONFIG_RTC_DRV_AT91RM9200=y
 # CONFIG_RTC_DRV_TEST is not set
 
 #
-- 
cgit v1.1


From dd1d2f4439af3bc80c047a13a8a2be60df1953cd Mon Sep 17 00:00:00 2001
From: Jan Altenberg <jan@linutronix.de>
Date: Fri, 16 Feb 2007 01:37:10 -0800
Subject: [ARM] at91: correct value for AT91_RSTC_KEY

- Remove a duplicated define for AT91_RSTC_KEY
- Set AT91_RSTC_KEY to the correct value
- Replace the hardcoded keys in at91sam9620.c and at91sam9261.c
  by AT91_RSTC_KEY

Signed-off-by: Jan Altenberg <jan@linutronix.de>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/at91sam9260.c      | 2 +-
 arch/arm/mach-at91/at91sam9261.c      | 2 +-
 include/asm-arm/arch-at91/at91_rstc.h | 3 +--
 3 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 003c27c..6ea41d8 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -259,7 +259,7 @@ static struct at91_gpio_bank at91sam9260_gpio[] = {
 
 static void at91sam9260_reset(void)
 {
-	at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
 }
 
 
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 1a910236..784d1e6 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -225,7 +225,7 @@ static struct at91_gpio_bank at91sam9261_gpio[] = {
 
 static void at91sam9261_reset(void)
 {
-	at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
 }
 
 
diff --git a/include/asm-arm/arch-at91/at91_rstc.h b/include/asm-arm/arch-at91/at91_rstc.h
index 0b7afbc..fb8d161 100644
--- a/include/asm-arm/arch-at91/at91_rstc.h
+++ b/include/asm-arm/arch-at91/at91_rstc.h
@@ -17,7 +17,7 @@
 #define		AT91_RSTC_PROCRST	(1 << 0)		/* Processor Reset */
 #define		AT91_RSTC_PERRST	(1 << 2)		/* Peripheral Reset */
 #define		AT91_RSTC_EXTRST	(1 << 3)		/* External Reset */
-#define		AT91_RSTC_KEY		(0xff << 24)		/* KEY Password */
+#define		AT91_RSTC_KEY		(0xa5 << 24)		/* KEY Password */
 
 #define AT91_RSTC_SR		(AT91_RSTC + 0x04)	/* Reset Controller Status Register */
 #define		AT91_RSTC_URSTS		(1 << 0)		/* User Reset Status */
@@ -34,6 +34,5 @@
 #define		AT91_RSTC_URSTEN	(1 << 0)		/* User Reset Enable */
 #define		AT91_RSTC_URSTIEN	(1 << 4)		/* User Reset Interrupt Enable */
 #define		AT91_RSTC_ERSTL		(0xf << 8)		/* External Reset Length */
-#define		AT91_RSTC_KEY		(0xff << 24)		/* KEY Password */
 
 #endif
-- 
cgit v1.1


From 0e0ba76926c37f11f38670db0cb33728f502551e Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Thu, 15 Feb 2007 19:05:29 +0100
Subject: [ARM] 4201/1: SMP barriers pair needed for the secondary boot process

In some situations, the pen_release store in platform_secondary_init()
may stay forever in the write buffer while the CPU is waiting on the
boot_lock to be released in boot_secondary(). The primary CPU could
never see the pen_release update without the barriers.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-realview/platsmp.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 709a9b1..fce3596 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -59,6 +59,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 * pen, then head off into the C entry point
 	 */
 	pen_release = -1;
+	smp_wmb();
 
 	/*
 	 * Synchronise with the boot thread.
@@ -102,6 +103,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
+		smp_rmb();
 		if (pen_release == -1)
 			break;
 
-- 
cgit v1.1


From a7eec7b332e83ee63f7db08cc54bf3b4663eed67 Mon Sep 17 00:00:00 2001
From: Arnaud Patard <arnaud.patard@rtp-net.org>
Date: Fri, 16 Feb 2007 22:19:48 +0100
Subject: [ARM] 4213/1: S3C2410 - Update definition of ADCTSC_XY_PST

Update S3C2410_ADCTSC_XY_PST macro to allow setting the ADCTSC_XY_PST
bits.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-s3c2410/regs-adc.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/asm-arm/arch-s3c2410/regs-adc.h b/include/asm-arm/arch-s3c2410/regs-adc.h
index 3196a28..c7f2319 100644
--- a/include/asm-arm/arch-s3c2410/regs-adc.h
+++ b/include/asm-arm/arch-s3c2410/regs-adc.h
@@ -41,7 +41,7 @@
 #define S3C2410_ADCTSC_XP_SEN		(1<<4)
 #define S3C2410_ADCTSC_PULL_UP_DISABLE	(1<<3)
 #define S3C2410_ADCTSC_AUTO_PST		(1<<2)
-#define S3C2410_ADCTSC_XY_PST		(0x3<<0)
+#define S3C2410_ADCTSC_XY_PST(x)	(((x)&0x3)<<0)
 
 /* ADCDAT0 Bits */
 #define S3C2410_ADCDAT0_UPDOWN		(1<<15)
-- 
cgit v1.1


From 52c477a34bd26f246485b04c75f700a0c2a52580 Mon Sep 17 00:00:00 2001
From: Arnaud Patard <arnaud.patard@rtp-net.org>
Date: Fri, 16 Feb 2007 23:50:32 +0100
Subject: [ARM] 4215/1: s3c2410 usb device:  per-platform vbus_draw

Introduce a platform_device (machine) specific callback function
which gets called when the amount of power we can draw from Vbus
has changed.

Signed-off-by: Harald Welte <laforge@openmoko.org>
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-s3c2410/udc.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/asm-arm/arch-s3c2410/udc.h b/include/asm-arm/arch-s3c2410/udc.h
index 2529eff..e59ec33 100644
--- a/include/asm-arm/arch-s3c2410/udc.h
+++ b/include/asm-arm/arch-s3c2410/udc.h
@@ -12,6 +12,7 @@
  *	14-Mar-2005	RTP	Created file
  *	02-Aug-2005	RTP	File rename
  *	07-Sep-2005	BJD	Minor cleanups, changed cmd to enum
+ *	18-Jan-2007	HMW	Add per-platform vbus_draw function
 */
 
 #ifndef __ASM_ARM_ARCH_UDC_H
@@ -25,6 +26,7 @@ enum s3c2410_udc_cmd_e {
 
 struct s3c2410_udc_mach_info {
 	void	(*udc_command)(enum s3c2410_udc_cmd_e);
+ 	void	(*vbus_draw)(unsigned int ma);
 	unsigned int vbus_pin;
 	unsigned char vbus_pin_inverted;
 };
-- 
cgit v1.1


From c6184e271db4948d4f6e07f271abeb8697a80eba Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sat, 17 Feb 2007 00:52:37 +0100
Subject: [ARM] 4214/2: S3C2410: Add Armzone QT2410

Patch from: Harald Welte <laforge@openmoko.org>

Add support for the Armzone QT2410 system, with
basic peripheral support for TFT display, SPI
and LEDs.

Signed-off-by: Harald Welte <laforge@openmoko.org>
Signed-off-by: Ben Dooks <ben-linux@fluf.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-s3c2410/Kconfig       |   5 +
 arch/arm/mach-s3c2410/Makefile      |   1 +
 arch/arm/mach-s3c2410/mach-qt2410.c | 448 ++++++++++++++++++++++++++++++++++++
 3 files changed, 454 insertions(+)
 create mode 100644 arch/arm/mach-s3c2410/mach-qt2410.c

diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 016b53f..d4b013b 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -103,6 +103,11 @@ config MACH_VR1000
 	help
 	  Say Y here if you are using the Thorcom VR1000 board.
 
+config MACH_QT2410
+	bool "QT2410"
+	select CPU_S3C2410
+	help
+	   Say Y here if you are using the Armzone QT2410
 
 endmenu
 
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index b33ac5b..9a3d3d2 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -28,3 +28,4 @@ obj-$(CONFIG_MACH_OTOM)		+= mach-otom.o
 obj-$(CONFIG_MACH_AML_M5900)	+= mach-amlm5900.o
 obj-$(CONFIG_BAST_PC104_IRQ)	+= bast-irq.o
 obj-$(CONFIG_MACH_VR1000)	+= mach-vr1000.o usb-simtec.o
+obj-$(CONFIG_MACH_QT2410)	+= mach-qt2410.o
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
new file mode 100644
index 0000000..c6a4159
--- /dev/null
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -0,0 +1,448 @@
+/* linux/arch/arm/mach-s3c2410/mach-qt2410.c
+ *
+ * Copyright (C) 2006 by OpenMoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/mmc/protocol.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/leds-gpio.h>
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/fb.h>
+#include <asm/arch/nand.h>
+#include <asm/arch/udc.h>
+#include <asm/arch/spi.h>
+#include <asm/arch/spi-gpio.h>
+
+#include <asm/plat-s3c24xx/common-smdk.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
+
+static struct map_desc qt2410_iodesc[] __initdata = {
+	{ 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE }
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk2410_uartcfgs[] = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	}
+};
+
+/* LCD driver info */
+
+/* Configuration for 640x480 SHARP LQ080V3DG01 */
+static struct s3c2410fb_mach_info qt2410_biglcd_cfg __initdata = {
+	.regs	= {
+
+		.lcdcon1	= S3C2410_LCDCON1_TFT16BPP |
+				  S3C2410_LCDCON1_TFT |
+				  S3C2410_LCDCON1_CLKVAL(0x01),	/* HCLK/4 */
+
+		.lcdcon2	= S3C2410_LCDCON2_VBPD(18) |	/* 19 */
+				  S3C2410_LCDCON2_LINEVAL(479) |
+				  S3C2410_LCDCON2_VFPD(10) |	/* 11 */
+				  S3C2410_LCDCON2_VSPW(14),	/* 15 */
+
+		.lcdcon3	= S3C2410_LCDCON3_HBPD(43) |	/* 44 */
+				  S3C2410_LCDCON3_HOZVAL(639) |	/* 640 */
+				  S3C2410_LCDCON3_HFPD(115),	/* 116 */
+
+		.lcdcon4	= S3C2410_LCDCON4_MVAL(0) |
+				  S3C2410_LCDCON4_HSPW(95),	/* 96 */
+
+		.lcdcon5	= S3C2410_LCDCON5_FRM565 |
+				  S3C2410_LCDCON5_INVVLINE |
+				  S3C2410_LCDCON5_INVVFRAME |
+				  S3C2410_LCDCON5_PWREN |
+				  S3C2410_LCDCON5_HWSWP,
+	},
+
+	.lpcsel		= ((0xCE6) & ~7) | 1<<4,
+
+	.width		= 640,
+	.height		= 480,
+
+	.xres		= {
+		.min	= 640,
+		.max	= 640,
+		.defval	= 640,
+	},
+
+	.yres		= {
+		.min	= 480,
+		.max	= 480,
+		.defval = 480,
+	},
+
+	.bpp		= {
+		.min	= 16,
+		.max	= 16,
+		.defval = 16,
+	},
+};
+
+/* Configuration for 480x640 toppoly TD028TTEC1 */
+static struct s3c2410fb_mach_info qt2410_prodlcd_cfg __initdata = {
+	.regs	= {
+
+		.lcdcon1	= S3C2410_LCDCON1_TFT16BPP |
+				  S3C2410_LCDCON1_TFT |
+				  S3C2410_LCDCON1_CLKVAL(0x01),	/* HCLK/4 */
+
+		.lcdcon2	= S3C2410_LCDCON2_VBPD(1) |	/* 2 */
+				  S3C2410_LCDCON2_LINEVAL(639) |/* 640 */
+				  S3C2410_LCDCON2_VFPD(3) |	/* 4 */
+				  S3C2410_LCDCON2_VSPW(1),	/* 2 */
+
+		.lcdcon3	= S3C2410_LCDCON3_HBPD(7) |	/* 8 */
+				  S3C2410_LCDCON3_HOZVAL(479) |	/* 479 */
+				  S3C2410_LCDCON3_HFPD(23),	/* 24 */
+
+		.lcdcon4	= S3C2410_LCDCON4_MVAL(0) |
+				  S3C2410_LCDCON4_HSPW(7),	/* 8 */
+
+		.lcdcon5	= S3C2410_LCDCON5_FRM565 |
+				  S3C2410_LCDCON5_INVVLINE |
+				  S3C2410_LCDCON5_INVVFRAME |
+				  S3C2410_LCDCON5_PWREN |
+				  S3C2410_LCDCON5_HWSWP,
+	},
+
+	.lpcsel		= ((0xCE6) & ~7) | 1<<4,
+
+	.width		= 480,
+	.height		= 640,
+
+	.xres		= {
+		.min	= 480,
+		.max	= 480,
+		.defval	= 480,
+	},
+
+	.yres		= {
+		.min	= 640,
+		.max	= 640,
+		.defval = 640,
+	},
+
+	.bpp		= {
+		.min	= 16,
+		.max	= 16,
+		.defval = 16,
+	},
+};
+
+/* Config for 240x320 LCD */
+static struct s3c2410fb_mach_info qt2410_lcd_cfg __initdata = {
+	.regs	= {
+
+		.lcdcon1	= S3C2410_LCDCON1_TFT16BPP |
+				  S3C2410_LCDCON1_TFT |
+				  S3C2410_LCDCON1_CLKVAL(0x04),
+
+		.lcdcon2	= S3C2410_LCDCON2_VBPD(1) |
+				  S3C2410_LCDCON2_LINEVAL(319) |
+				  S3C2410_LCDCON2_VFPD(6) |
+				  S3C2410_LCDCON2_VSPW(3),
+
+		.lcdcon3	= S3C2410_LCDCON3_HBPD(12) |
+				  S3C2410_LCDCON3_HOZVAL(239) |
+				  S3C2410_LCDCON3_HFPD(7),
+
+		.lcdcon4	= S3C2410_LCDCON4_MVAL(0) |
+				  S3C2410_LCDCON4_HSPW(3),
+
+		.lcdcon5	= S3C2410_LCDCON5_FRM565 |
+				  S3C2410_LCDCON5_INVVLINE |
+				  S3C2410_LCDCON5_INVVFRAME |
+				  S3C2410_LCDCON5_PWREN |
+				  S3C2410_LCDCON5_HWSWP,
+	},
+
+	.lpcsel		= ((0xCE6) & ~7) | 1<<4,
+
+	.width		= 240,
+	.height		= 320,
+
+	.xres		= {
+		.min	= 240,
+		.max	= 240,
+		.defval	= 240,
+	},
+
+	.yres		= {
+		.min	= 320,
+		.max	= 320,
+		.defval = 320,
+	},
+
+	.bpp		= {
+		.min	= 16,
+		.max	= 16,
+		.defval = 16,
+	},
+};
+
+/* CS8900 */
+
+static struct resource qt2410_cs89x0_resources[] = {
+	[0] = {
+		.start	= 0x19000000,
+		.end	= 0x19000000 + 16,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_EINT9,
+		.end	= IRQ_EINT9,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device qt2410_cs89x0 = {
+	.name		= "cirrus-cs89x0",
+	.num_resources	= ARRAY_SIZE(qt2410_cs89x0_resources),
+	.resource	= qt2410_cs89x0_resources,
+};
+
+/* LED */
+
+static struct s3c24xx_led_platdata qt2410_pdata_led = {
+	.gpio		= S3C2410_GPB0,
+	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+	.name		= "led",
+	.def_trigger	= "timer",
+};
+
+static struct platform_device qt2410_led = {
+	.name		= "s3c24xx_led",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &qt2410_pdata_led,
+	},
+};
+
+/* SPI */
+
+static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs)
+{
+	switch (cs) {
+	case BITBANG_CS_ACTIVE:
+		s3c2410_gpio_setpin(S3C2410_GPB5, 0);
+		break;
+	case BITBANG_CS_INACTIVE:
+		s3c2410_gpio_setpin(S3C2410_GPB5, 1);
+		break;
+	}
+}
+
+static struct s3c2410_spigpio_info spi_gpio_cfg = {
+	.pin_clk	= S3C2410_GPG7,
+	.pin_mosi	= S3C2410_GPG6,
+	.pin_miso	= S3C2410_GPG5,
+	.chip_select	= &spi_gpio_cs,
+};
+
+
+static struct platform_device qt2410_spi = {
+	.name		  = "s3c24xx-spi-gpio",
+	.id		  = 1,
+	.dev = {
+		.platform_data = &spi_gpio_cfg,
+	},
+};
+
+/* Board devices */
+
+static struct platform_device *qt2410_devices[] __initdata = {
+	&s3c_device_usb,
+	&s3c_device_lcd,
+	&s3c_device_wdt,
+	&s3c_device_i2c,
+	&s3c_device_iis,
+	&s3c_device_sdi,
+	&s3c_device_usbgadget,
+	&qt2410_spi,
+	&qt2410_cs89x0,
+	&qt2410_led,
+};
+
+static struct s3c24xx_board qt2410_board __initdata = {
+	.devices       = qt2410_devices,
+	.devices_count = ARRAY_SIZE(qt2410_devices)
+};
+
+static struct mtd_partition qt2410_nand_part[] = {
+	[0] = {
+		.name	= "U-Boot",
+		.size	= 0x30000,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "U-Boot environment",
+		.offset = 0x30000,
+		.size	= 0x4000,
+	},
+	[2] = {
+		.name	= "kernel",
+		.offset = 0x34000,
+		.size	= SZ_2M,
+	},
+	[3] = {
+		.name	= "initrd",
+		.offset	= 0x234000,
+		.size	= SZ_4M,
+	},
+	[4] = {
+		.name	= "jffs2",
+		.offset = 0x634000,
+		.size	= 0x39cc000,
+	},
+};
+
+static struct s3c2410_nand_set qt2410_nand_sets[] = {
+	[0] = {
+		.name		= "NAND",
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(qt2410_nand_part),
+		.partitions	= qt2410_nand_part,
+	},
+};
+
+/* choose a set of timings which should suit most 512Mbit
+ * chips and beyond.
+ */
+
+static struct s3c2410_platform_nand qt2410_nand_info = {
+	.tacls		= 20,
+	.twrph0		= 60,
+	.twrph1		= 20,
+	.nr_sets	= ARRAY_SIZE(qt2410_nand_sets),
+	.sets		= qt2410_nand_sets,
+};
+
+/* UDC */
+
+static struct s3c2410_udc_mach_info qt2410_udc_cfg = {
+};
+
+static char tft_type = 's';
+
+static int __init qt2410_tft_setup(char *str)
+{
+	tft_type = str[0];
+	return 1;
+}
+
+__setup("tft=", qt2410_tft_setup);
+
+static void __init qt2410_map_io(void)
+{
+	s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
+	s3c24xx_init_clocks(12*1000*1000);
+	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
+	s3c24xx_set_board(&qt2410_board);
+}
+
+static void __init qt2410_machine_init(void)
+{
+	s3c_device_nand.dev.platform_data = &qt2410_nand_info;
+
+	switch (tft_type) {
+	case 'p': /* production */
+		s3c24xx_fb_set_platdata(&qt2410_prodlcd_cfg);
+		break;
+	case 'b': /* big */
+		s3c24xx_fb_set_platdata(&qt2410_biglcd_cfg);
+		break;
+	case 's': /* small */
+	default:
+		s3c24xx_fb_set_platdata(&qt2410_lcd_cfg);
+		break;
+	}
+
+	s3c2410_gpio_cfgpin(S3C2410_GPB0, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPB0, 1);
+
+	s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
+
+	s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
+
+	s3c2410_pm_init();
+}
+
+MACHINE_START(QT2410, "QT2410")
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.map_io		= qt2410_map_io,
+	.init_irq	= s3c24xx_init_irq,
+	.init_machine	= qt2410_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
+
+
-- 
cgit v1.1


From 3d9dd6bdbd6765a86736ead09009daf29382a6f2 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sat, 17 Feb 2007 14:02:37 +0100
Subject: [ARM] 4217/1: S3C24XX: remove the dma channel show at startup

Remove the DMA code's channel printing at startup
as this is firstly a waste of console output on
initialsaion, and secondly is going to be obsolete
once the S3C2443 DMA code has been merged

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/plat-s3c24xx/dma.c | 14 --------------
 1 file changed, 14 deletions(-)

diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 44e3943..929265a 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -1426,22 +1426,8 @@ struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
 	return dmach;
 }
 
-static void s3c24xx_dma_show_ch(struct s3c24xx_dma_map *map, int ch)
-{
-	/* show the channel configuration */
-
-	printk("%2d: %20s, channels %c%c%c%c\n", ch, map->name,
-	       (is_channel_valid(map->channels[0]) ? '0' : '-'),
-	       (is_channel_valid(map->channels[1]) ? '1' : '-'),
-	       (is_channel_valid(map->channels[2]) ? '2' : '-'),
-	       (is_channel_valid(map->channels[3]) ? '3' : '-'));
-}
-
 static int s3c24xx_dma_check_entry(struct s3c24xx_dma_map *map, int ch)
 {
-	if (1)
-		s3c24xx_dma_show_ch(map, ch);
-
 	return 0;
 }
 
-- 
cgit v1.1


From 64f33beafbaae55d116e933e8eae6b068fba617f Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sat, 17 Feb 2007 14:04:33 +0100
Subject: [ARM] 4218/1: S3C2412: fix CONFIG_CPU_S3C2412_ONLY wrt to S3C2443

Update the Kconfig of arch/arm/mach-s3c2443 to
add the CONFIG_CPU_S3C2443 to the list of config
variabls which mean CONFIG_CPU_S3C2412_ONLY cannot
be set

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-s3c2412/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index 6d629de84..befc5fd 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -15,7 +15,7 @@ config CPU_S3C2412
 config CPU_S3C2412_ONLY
 	bool
 	depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
-		   !CPU_S3C2440 && !CPU_S3C2442 && CPU_S3C2412
+		   !CPU_S3C2440 && !CPU_S3C2442 && !CPU_S3C2443 && CPU_S3C2412
 	default y if CPU_S3C2412
 
 config S3C2412_DMA
-- 
cgit v1.1


From 15e4db7b8054ac171de946b9511655446dd29b8f Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sat, 17 Feb 2007 15:05:17 +0100
Subject: [ARM] 4219/1: S3C2443: DMA source definitions

Defines for the S3C2443 DMA source selection,
and update the maximum channels to 6 if the S3C2443
is selected.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-s3c2410/dma.h | 36 +++++++++++++++++++++++++++++++++++-
 1 file changed, 35 insertions(+), 1 deletion(-)

diff --git a/include/asm-arm/arch-s3c2410/dma.h b/include/asm-arm/arch-s3c2410/dma.h
index 58ffa7b..c6e8d8f 100644
--- a/include/asm-arm/arch-s3c2410/dma.h
+++ b/include/asm-arm/arch-s3c2410/dma.h
@@ -51,13 +51,19 @@ enum dma_ch {
 	DMACH_UART0_SRC2,	/* s3c2412 second uart sources */
 	DMACH_UART1_SRC2,
 	DMACH_UART2_SRC2,
+	DMACH_UART3,		/* s3c2443 has extra uart */
+	DMACH_UART3_SRC2,
 	DMACH_MAX,		/* the end entry */
 };
 
 #define DMACH_LOW_LEVEL	(1<<28)	/* use this to specifiy hardware ch no */
 
 /* we have 4 dma channels */
-#define S3C2410_DMA_CHANNELS        (4)
+#ifndef CONFIG_CPU_S3C2443
+#define S3C2410_DMA_CHANNELS		(4)
+#else
+#define S3C2410_DMA_CHANNELS		(6)
+#endif
 
 /* types */
 
@@ -321,6 +327,7 @@ extern int s3c2410_dma_set_buffdone_fn(dmach_t, s3c2410_dma_cbfn_t rtn);
 #define S3C2410_DMA_DCDST       (0x1C)
 #define S3C2410_DMA_DMASKTRIG   (0x20)
 #define S3C2412_DMA_DMAREQSEL	(0x24)
+#define S3C2443_DMA_DMAREQSEL	(0x24)
 
 #define S3C2410_DISRCC_INC	(1<<0)
 #define S3C2410_DISRCC_APB	(1<<1)
@@ -415,4 +422,31 @@ extern int s3c2410_dma_set_buffdone_fn(dmach_t, s3c2410_dma_cbfn_t rtn);
 #define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
 
 #endif
+
+#define S3C2443_DMAREQSEL_SRC(x)	((x)<<1)
+
+#define S3C2443_DMAREQSEL_HW		(1)
+
+#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
+#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
+#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
+#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
+#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
+#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
+#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
+#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
+#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
+#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
+#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
+#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
+#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
+#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
+#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
+#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
+#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
+#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
+#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
+#define S3C2443_DMAREQSEL_PCMIN 	S3C2443_DMAREQSEL_SRC(28)
+#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
+
 #endif /* __ASM_ARCH_DMA_H */
-- 
cgit v1.1


From 48adbcf33b6087727a2db0b517c994a7ecfbeb0c Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sat, 17 Feb 2007 15:37:14 +0100
Subject: [ARM] 4220/1: S3C24XX: DMA system initialised from sysdev

This patch gets the DMA system for the S3C24XX
ready for the S3C2443, which requires 6 dma channels
at a different stride, and different base IRQ.

The DMA system is now initialised from the same
drivers which apply the DMA mappings, as well
as removing the DMA sysdev intialisation out of
the main init code (which is now being called
from a sysdev probe, so cannot add a new sysdev)

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-s3c2410/dma.c        | 11 +++---
 arch/arm/mach-s3c2412/dma.c        |  1 +
 arch/arm/mach-s3c2440/dma.c        |  3 +-
 arch/arm/plat-s3c24xx/dma.c        | 77 ++++++++++++++++++++++++++------------
 include/asm-arm/plat-s3c24xx/dma.h |  7 ++++
 5 files changed, 69 insertions(+), 30 deletions(-)

diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 6b34526..67d1ad3 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -19,9 +19,9 @@
 
 #include <asm/dma.h>
 #include <asm/arch/dma.h>
-#include <asm/plat-s3c24xx/dma.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/dma.h>
 
 #include <asm/arch/regs-serial.h>
 #include <asm/arch/regs-gpio.h>
@@ -147,6 +147,7 @@ static struct s3c24xx_dma_order __initdata s3c2410_dma_order = {
 
 static int s3c2410_dma_add(struct sys_device *sysdev)
 {
+	s3c2410_dma_init();
 	s3c24xx_dma_order_set(&s3c2410_dma_order);
 	return s3c24xx_dma_init_map(&s3c2410_dma_sel);
 }
@@ -156,12 +157,12 @@ static struct sysdev_driver s3c2410_dma_driver = {
 	.add	= s3c2410_dma_add,
 };
 
-static int __init s3c2410_dma_init(void)
+static int __init s3c2410_dma_drvinit(void)
 {
 	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_dma_driver);
 }
 
-arch_initcall(s3c2410_dma_init);
+arch_initcall(s3c2410_dma_drvinit);
 #endif
 
 #if defined(CONFIG_CPU_S3C2442)
@@ -170,11 +171,11 @@ static struct sysdev_driver s3c2442_dma_driver = {
 	.add	= s3c2410_dma_add,
 };
 
-static int __init s3c2442_dma_init(void)
+static int __init s3c2442_dma_drvinit(void)
 {
 	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_dma_driver);
 }
 
-arch_initcall(s3c2442_dma_init);
+arch_initcall(s3c2442_dma_drvinit);
 #endif
 
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 28b5982..d0f4695 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -146,6 +146,7 @@ static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = {
 
 static int s3c2412_dma_add(struct sys_device *sysdev)
 {
+	s3c2410_dma_init();
 	return s3c24xx_dma_init_map(&s3c2412_dma_sel);
 }
 
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index 2bb2926..cd035a3 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -19,8 +19,8 @@
 
 #include <asm/dma.h>
 #include <asm/arch/dma.h>
-#include <asm/plat-s3c24xx/dma.h>
 
+#include <asm/plat-s3c24xx/dma.h>
 #include <asm/plat-s3c24xx/cpu.h>
 
 #include <asm/arch/regs-serial.h>
@@ -192,6 +192,7 @@ static struct s3c24xx_dma_order __initdata s3c2440_dma_order = {
 
 static int s3c2440_dma_add(struct sys_device *sysdev)
 {
+	s3c2410_dma_init();
 	s3c24xx_dma_order_set(&s3c2440_dma_order);
 	return s3c24xx_dma_init_map(&s3c2440_dma_sel);
 }
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 929265a..4540a80 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -42,6 +42,8 @@
 static void __iomem *dma_base;
 static struct kmem_cache *dma_kmem;
 
+static int dma_channels;
+
 struct s3c24xx_dma_selection dma_sel;
 
 /* dma channel state information */
@@ -1278,7 +1280,42 @@ static void s3c2410_dma_cache_ctor(void *p, struct kmem_cache *c, unsigned long
 
 /* initialisation code */
 
-static int __init s3c2410_init_dma(void)
+int __init s3c24xx_dma_sysclass_init(void)
+{
+	int ret = sysdev_class_register(&dma_sysclass);
+
+	if (ret != 0)
+		printk(KERN_ERR "dma sysclass registration failed\n");
+
+	return ret;
+}
+
+core_initcall(s3c24xx_dma_sysclass_init);
+
+int __init s3c24xx_dma_sysdev_register(void)
+{
+	struct s3c2410_dma_chan *cp = s3c2410_chans;
+	int channel, ret;
+
+	for (channel = 0; channel < dma_channels; cp++, channel++) {
+		cp->dev.cls = &dma_sysclass;
+		cp->dev.id  = channel;
+		ret = sysdev_register(&cp->dev);
+
+		if (ret) {
+			printk(KERN_ERR "error registering dev for dma %d\n",
+			       channel);
+ 			return ret;
+		}
+	}
+
+	return 0;
+}
+
+late_initcall(s3c24xx_dma_sysdev_register);
+
+int __init s3c24xx_dma_init(unsigned int channels, unsigned int irq,
+			    unsigned int stride)
 {
 	struct s3c2410_dma_chan *cp;
 	int channel;
@@ -1286,21 +1323,16 @@ static int __init s3c2410_init_dma(void)
 
 	printk("S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics\n");
 
-	dma_base = ioremap(S3C24XX_PA_DMA, 0x200);
+	dma_channels = channels;
+
+	dma_base = ioremap(S3C24XX_PA_DMA, stride * channels);
 	if (dma_base == NULL) {
 		printk(KERN_ERR "dma failed to remap register block\n");
 		return -ENOMEM;
 	}
 
-	printk("Registering sysclass\n");
-
-	ret = sysdev_class_register(&dma_sysclass);
-	if (ret != 0) {
-		printk(KERN_ERR "dma sysclass registration failed\n");
-		goto err;
-	}
-
-	dma_kmem = kmem_cache_create("dma_desc", sizeof(struct s3c2410_dma_buf), 0,
+	dma_kmem = kmem_cache_create("dma_desc",
+				     sizeof(struct s3c2410_dma_buf), 0,
 				     SLAB_HWCACHE_ALIGN,
 				     s3c2410_dma_cache_ctor, NULL);
 
@@ -1310,15 +1342,15 @@ static int __init s3c2410_init_dma(void)
 		goto err;
 	}
 
-	for (channel = 0; channel < S3C2410_DMA_CHANNELS; channel++) {
+	for (channel = 0; channel < channels;  channel++) {
 		cp = &s3c2410_chans[channel];
 
 		memset(cp, 0, sizeof(struct s3c2410_dma_chan));
 
 		/* dma channel irqs are in order.. */
 		cp->number = channel;
-		cp->irq    = channel + IRQ_DMA0;
-		cp->regs   = dma_base + (channel*0x40);
+		cp->irq    = channel + irq;
+		cp->regs   = dma_base + (channel * stride);
 
 		/* point current stats somewhere */
 		cp->stats  = &cp->stats_store;
@@ -1328,12 +1360,6 @@ static int __init s3c2410_init_dma(void)
 
 		cp->load_timeout = 1<<18;
 
-		/* register system device */
-
-		cp->dev.cls = &dma_sysclass;
-		cp->dev.id  = channel;
-		ret = sysdev_register(&cp->dev);
-
 		printk("DMA channel %d at %p, irq %d\n",
 		       cp->number, cp->regs, cp->irq);
 	}
@@ -1347,7 +1373,10 @@ static int __init s3c2410_init_dma(void)
 	return ret;
 }
 
-core_initcall(s3c2410_init_dma);
+int s3c2410_dma_init(void)
+{
+	return s3c24xx_dma_init(4, IRQ_DMA0, 0x40);
+}
 
 static inline int is_channel_valid(unsigned int channel)
 {
@@ -1384,7 +1413,7 @@ struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
 	if (dma_order) {
 		ord = &dma_order->channels[channel];
 
-		for (ch = 0; ch < S3C2410_DMA_CHANNELS; ch++) {
+		for (ch = 0; ch < dma_channels; ch++) {
 			if (!is_channel_valid(ord->list[ch]))
 				continue;
 
@@ -1400,7 +1429,7 @@ struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
 
 	/* second, search the channel map for first free */
 
-	for (ch = 0; ch < S3C2410_DMA_CHANNELS; ch++) {
+	for (ch = 0; ch < dma_channels; ch++) {
 		if (!is_channel_valid(ch_map->channels[ch]))
 			continue;
 
@@ -1410,7 +1439,7 @@ struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
 		}
 	}
 
-	if (ch >= S3C2410_DMA_CHANNELS)
+	if (ch >= dma_channels)
 		return NULL;
 
 	/* update our channel mapping */
diff --git a/include/asm-arm/plat-s3c24xx/dma.h b/include/asm-arm/plat-s3c24xx/dma.h
index 15e140c..2c59406 100644
--- a/include/asm-arm/plat-s3c24xx/dma.h
+++ b/include/asm-arm/plat-s3c24xx/dma.h
@@ -68,3 +68,10 @@ struct s3c24xx_dma_order {
 };
 
 extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map);
+
+/* DMA init code, called from the cpu support code */
+
+extern int s3c2410_dma_init(void);
+
+extern int s3c24xx_dma_init(unsigned int channels, unsigned int irq,
+			    unsigned int stride);
-- 
cgit v1.1


From f8271e57569d1a2e7061f1754a5bb797a13b302d Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sat, 17 Feb 2007 15:41:50 +0100
Subject: [ARM] 4221/1: S3C2443: DMA support

Add initialisation and mappings for S3C2443 DMA
system

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-s3c2443/Kconfig  |   6 ++
 arch/arm/mach-s3c2443/Makefile |   2 +
 arch/arm/mach-s3c2443/dma.c    | 180 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 188 insertions(+)
 create mode 100644 arch/arm/mach-s3c2443/dma.c

diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
index 722bdea..079c1ef 100644
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -12,6 +12,12 @@ config CPU_S3C2443
 	help
 	  Support for the S3C2443 SoC from the S3C24XX line
 
+config S3C2443_DMA
+	bool
+	depends on CPU_S3C2443
+	help
+	  Internal config node for S3C2443 DMA support
+
 menu "S3C2443 Machines"
 
 config MACH_SMDK2443
diff --git a/arch/arm/mach-s3c2443/Makefile b/arch/arm/mach-s3c2443/Makefile
index a878076..d1843c9 100644
--- a/arch/arm/mach-s3c2443/Makefile
+++ b/arch/arm/mach-s3c2443/Makefile
@@ -13,6 +13,8 @@ obj-$(CONFIG_CPU_S3C2443)	+= s3c2443.o
 obj-$(CONFIG_CPU_S3C2443)	+= irq.o
 obj-$(CONFIG_CPU_S3C2443)	+= clock.o
 
+obj-$(CONFIG_S3C2443_DMA)	+= dma.o
+
 # Machine support
 
 obj-$(CONFIG_MACH_SMDK2443)	+= mach-smdk2443.o
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
new file mode 100644
index 0000000..f70e8cc
--- /dev/null
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -0,0 +1,180 @@
+/* linux/arch/arm/mach-s3c2443/dma.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2443 DMA selection
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+
+#include <asm/dma.h>
+#include <asm/arch/dma.h>
+#include <asm/io.h>
+
+#include <asm/plat-s3c24xx/dma.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-ac97.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/regs-sdi.h>
+#include <asm/arch/regs-iis.h>
+#include <asm/arch/regs-spi.h>
+
+#define MAP(x) { \
+		[0]	= (x) | DMA_CH_VALID,	\
+		[1]	= (x) | DMA_CH_VALID,	\
+		[2]	= (x) | DMA_CH_VALID,	\
+		[3]	= (x) | DMA_CH_VALID,	\
+		[4]	= (x) | DMA_CH_VALID,	\
+		[5]     = (x) | DMA_CH_VALID,	\
+	}
+
+static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = {
+	[DMACH_XD0] = {
+		.name		= "xdreq0",
+		.channels	= MAP(S3C2443_DMAREQSEL_XDREQ0),
+	},
+	[DMACH_XD1] = {
+		.name		= "xdreq1",
+		.channels	= MAP(S3C2443_DMAREQSEL_XDREQ1),
+	},
+	[DMACH_SDI] = {
+		.name		= "sdi",
+		.channels	= MAP(S3C2443_DMAREQSEL_SDI),
+		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_SPI0] = {
+		.name		= "spi0",
+		.channels	= MAP(S3C2443_DMAREQSEL_SPI0TX),
+		.hw_addr.to	= S3C2410_PA_SPI + S3C2410_SPTDAT,
+		.hw_addr.from	= S3C2410_PA_SPI + S3C2410_SPRDAT,
+	},
+	[DMACH_SPI1] = {
+		.name		= "spi1",
+		.channels	= MAP(S3C2443_DMAREQSEL_SPI1TX),
+		.hw_addr.to	= S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
+		.hw_addr.from	= S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
+	},
+	[DMACH_UART0] = {
+		.name		= "uart0",
+		.channels	= MAP(S3C2443_DMAREQSEL_UART0_0),
+		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
+	},
+	[DMACH_UART1] = {
+		.name		= "uart1",
+		.channels	= MAP(S3C2443_DMAREQSEL_UART1_0),
+		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
+	},
+      	[DMACH_UART2] = {
+		.name		= "uart2",
+		.channels	= MAP(S3C2443_DMAREQSEL_UART2_0),
+		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
+	},
+      	[DMACH_UART3] = {
+		.name		= "uart3",
+		.channels	= MAP(S3C2443_DMAREQSEL_UART3_0),
+		.hw_addr.to	= S3C2443_PA_UART3 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2443_PA_UART3 + S3C2410_URXH,
+	},
+	[DMACH_UART0_SRC2] = {
+		.name		= "uart0",
+		.channels	= MAP(S3C2443_DMAREQSEL_UART0_1),
+		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
+	},
+	[DMACH_UART1_SRC2] = {
+		.name		= "uart1",
+		.channels	= MAP(S3C2443_DMAREQSEL_UART1_1),
+		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
+	},
+      	[DMACH_UART2_SRC2] = {
+		.name		= "uart2",
+		.channels	= MAP(S3C2443_DMAREQSEL_UART2_1),
+		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
+	},
+      	[DMACH_UART3_SRC2] = {
+		.name		= "uart3",
+		.channels	= MAP(S3C2443_DMAREQSEL_UART3_1),
+		.hw_addr.to	= S3C2443_PA_UART3 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2443_PA_UART3 + S3C2410_URXH,
+	},
+	[DMACH_TIMER] = {
+		.name		= "timer",
+		.channels	= MAP(S3C2443_DMAREQSEL_TIMER),
+	},
+	[DMACH_I2S_IN] = {
+		.name		= "i2s-sdi",
+		.channels	= MAP(S3C2443_DMAREQSEL_I2SRX),
+		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_I2S_OUT] = {
+		.name		= "i2s-sdo",
+		.channels	= MAP(S3C2443_DMAREQSEL_I2STX),
+		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_PCM_IN] = {
+		.name		= "pcm-in",
+		.channels	= MAP(S3C2443_DMAREQSEL_PCMIN),
+		.hw_addr.from	= S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
+	},
+	[DMACH_PCM_OUT] = {
+		.name		= "pcm-out",
+		.channels	= MAP(S3C2443_DMAREQSEL_PCMOUT),
+		.hw_addr.to	= S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
+	},
+	[DMACH_MIC_IN] = {
+		.name		= "mic-in",
+		.channels	= MAP(S3C2443_DMAREQSEL_MICIN),
+		.hw_addr.from	= S3C2440_PA_AC97 + S3C_AC97_MIC_DATA,
+	},
+};
+
+static void s3c2443_dma_select(struct s3c2410_dma_chan *chan,
+			       struct s3c24xx_dma_map *map)
+{
+	writel(map->channels[0] | S3C2443_DMAREQSEL_HW,
+	       chan->regs + S3C2443_DMA_DMAREQSEL);
+}
+
+static struct s3c24xx_dma_selection __initdata s3c2443_dma_sel = {
+	.select		= s3c2443_dma_select,
+	.dcon_mask	= 0,
+	.map		= s3c2443_dma_mappings,
+	.map_size	= ARRAY_SIZE(s3c2443_dma_mappings),
+};
+
+static int s3c2443_dma_add(struct sys_device *sysdev)
+{
+	s3c24xx_dma_init(6, IRQ_S3C2443_DMA0, 0x100);
+	return s3c24xx_dma_init_map(&s3c2443_dma_sel);
+}
+
+static struct sysdev_driver s3c2443_dma_driver = {
+	.add	= s3c2443_dma_add,
+};
+
+static int __init s3c2443_dma_init(void)
+{
+	return sysdev_driver_register(&s3c2443_sysclass, &s3c2443_dma_driver);
+}
+
+arch_initcall(s3c2443_dma_init);
-- 
cgit v1.1


From 78c2644feccf78ecab8e9413d2fac83cda091bae Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sat, 17 Feb 2007 16:41:12 +0100
Subject: [ARM] 4222/1: S3C2443: Remove reference to missing S3C2443_PM

S3C2443_PM is not defined in our Kconfig, so
remove the reference from CPU_S3C2443 to stop
the configuration process warning about it.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-s3c2443/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
index 079c1ef..c649bb2 100644
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -7,7 +7,6 @@
 config CPU_S3C2443
 	bool
 	depends on ARCH_S3C2410
-	select S3C2443_PM if PM
 	select S3C2443_DMA if S3C2410_DMA
 	help
 	  Support for the S3C2443 SoC from the S3C24XX line
-- 
cgit v1.1