From f54feafa6d47d0aa1a96adefdc763b708b02f94f Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 20 Jun 2008 20:53:33 +0200 Subject: ide: increase timeout in wait_drive_not_busy() Some ATAPI devices take longer than the current max timeout value to become ready (i.e. TEAC DV-W28ECW takes 6 ms) so increase the timeout value to 10 ms. This fixes kernel.org bugzilla bug #10887: http://bugzilla.kernel.org/show_bug.cgi?id=10887 Reported-by: Masanari Iida Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-taskfile.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 0c908ca..ab545ff 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -225,10 +225,10 @@ static u8 wait_drive_not_busy(ide_drive_t *drive) u8 stat; /* - * Last sector was transfered, wait until drive is ready. - * This can take up to 10 usec, but we will wait max 1 ms. + * Last sector was transfered, wait until device is ready. This can + * take up to 6 ms on some ATAPI devices, so we will wait max 10 ms. */ - for (retries = 0; retries < 100; retries++) { + for (retries = 0; retries < 1000; retries++) { stat = ide_read_status(drive); if (stat & BUSY_STAT) -- cgit v1.1