From f24b56cbcd9d39cb2ed45b4b451f8614f9494c17 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 30 Oct 2013 17:55:09 +0100 Subject: ARM: kirkwood: add support for OpenBlocks A7 platform The OpenBlocks A7 board is designed and sold by PlatHome, and based on a Kirkwood 6283 Marvell SoC. It is quite similar to the OpenBlocks A6 already supported in the kernel, with the following main differences: - The A6 uses a RTC on I2C, while the A7 uses the internal SoC RTC. - The A6 has one Ethernet port, while the A7 has two Ethernet ports - The A6 has only one USB port, while the A7 integrates a USB hub, which provides two front-side USB port, and an internal USB port as well. - The A6 has 512 MB of RAM, while the A7 has 1 GB of RAM. - Slightly different GPIOs for some functions. Signed-off-by: Thomas Petazzoni Acked-by: Andrew Lunn Acked-by: Gregory CLEMENT Signed-off-by: Jason Cooper --- arch/arm/boot/dts/Makefile | 5 +- arch/arm/boot/dts/kirkwood-openblocks_a7.dts | 223 +++++++++++++++++++++++++++ 2 files changed, 226 insertions(+), 2 deletions(-) create mode 100644 arch/arm/boot/dts/kirkwood-openblocks_a7.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 5b83274..f2b1c33 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -95,12 +95,13 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ kirkwood-ns2mini.dtb \ kirkwood-nsa310.dtb \ kirkwood-nsa310a.dtb \ + kirkwood-openblocks_a6.dtb \ + kirkwood-openblocks_a7.dtb \ kirkwood-sheevaplug.dtb \ kirkwood-sheevaplug-esata.dtb \ kirkwood-topkick.dtb \ kirkwood-ts219-6281.dtb \ - kirkwood-ts219-6282.dtb \ - kirkwood-openblocks_a6.dtb + kirkwood-ts219-6282.dtb dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ msm8960-cdp.dtb diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts new file mode 100644 index 0000000..851fb2a --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts @@ -0,0 +1,223 @@ +/* + * Device Tree file for OpenBlocks A7 board + * + * Copyright (C) 2013 Free Electrons + * + * Thomas Petazzoni + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6282.dtsi" + +/ { + model = "Plat'Home OpenBlocksA7"; + compatible = "plathome,openblocks-a7", "marvell,kirkwood-88f6283", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; /* 1 GB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + serial@12000 { + status = "ok"; + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; + }; + + serial@12100 { + status = "ok"; + pinctrl-0 = <&pmx_uart1>; + pinctrl-names = "default"; + }; + + sata@80000 { + nr-ports = <1>; + status = "okay"; + }; + + i2c@11100 { + status = "okay"; + pinctrl-0 = <&pmx_twsi1>; + pinctrl-names = "default"; + + s24c02: s24c02@50 { + compatible = "24c02"; + reg = <0x50>; + }; + }; + + pinctrl: pinctrl@10000 { + pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>; + pinctrl-names = "default"; + + pmx_uart0: pmx-uart0 { + marvell,pins = "mpp10", "mpp11", "mpp15", + "mpp16"; + marvell,function = "uart0"; + }; + + pmx_uart1: pmx-uart1 { + marvell,pins = "mpp13", "mpp14", "mpp8", + "mpp9"; + marvell,function = "uart1"; + }; + + pmx_sysrst: pmx-sysrst { + marvell,pins = "mpp6"; + marvell,function = "sysrst"; + }; + + pmx_dip_switches: pmx-dip-switches { + marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47"; + marvell,function = "gpio"; + }; + + /* + * Accessible on connector J202. The MPP + * listed below are pin 1-7, pin 8 is unused, + * pin 9 is external reset input and pin 10 is + * ground. + */ + pmx_gpio_header: pmx-gpio-header { + marvell,pins = "mpp17", "mpp7", "mpp29", "mpp28", + "mpp35", "mpp34", "mpp40"; + marvell,function = "gpio"; + }; + + pmx_gpio_init: pmx-init { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + + pmx_usb_oc: pmx-usb-oc { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + + pmx_leds: pmx-leds { + marvell,pins = "mpp41", "mpp42", "mpp43"; + marvell,function = "gpio"; + }; + + pmx_ge1: pmx-ge1 { + marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23", + "mpp24", "mpp25", "mpp26", "mpp27", + "mpp30", "mpp31", "mpp32", "mpp33"; + marvell,function = "ge1"; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_leds>; + pinctrl-names = "default"; + + led-red { + label = "obsa7:red:stat"; + gpios = <&gpio1 9 1>; + }; + + led-green { + label = "obsa7:green:stat"; + gpios = <&gpio1 10 1>; + }; + + led-yellow { + label = "obsa7:yellow:stat"; + gpios = <&gpio1 11 1>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pmx_gpio_init>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Init Button"; + linux,code = <116>; + gpios = <&gpio1 6 0>; + }; + }; +}; + +&nand { + chip-delay = <25>; + status = "okay"; + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + + partition@0 { + label = "uboot"; + reg = <0x0 0x1c0000>; + }; + + partition@1c0000 { + label = "env"; + reg = <0x1c0000 0x2c0000>; + }; + + partition@480000 { + label = "test"; + reg = <0x480000 0x160000>; + }; + + partition@5e0000 { + label = "conf"; + reg = <0x5e0000 0x540000>; + }; + + partition@b20000 { + label = "linux"; + reg = <0xb20000 0x3d40000>; + }; + + partition@4860000 { + label = "user"; + reg = <0x4860000 0xb7a0000>; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + device_type = "ethernet-phy"; + reg = <1>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; + +ð1 { + status = "okay"; + pinctrl-0 = <&pmx_ge1>; + pinctrl-names = "default"; + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +}; -- cgit v1.1