From 9b1cb21c36b39057ec28a8b551f301449e5c51bb Mon Sep 17 00:00:00 2001
From: "John W. Linville" <linville@tuxdriver.com>
Date: Mon, 7 Dec 2009 16:37:42 -0500
Subject: iwlwifi: fix warning from ieee80211_stop_tx_ba_cb_irqsafe argument
 change
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

CC [M]  drivers/net/wireless/iwlwifi/iwl-tx.o
drivers/net/wireless/iwlwifi/iwl-tx.c: In function ‘iwl_tx_agg_stop’:
drivers/net/wireless/iwlwifi/iwl-tx.c:1356: warning: passing argument 1 of ‘ieee80211_stop_tx_ba_cb_irqsafe’ from incompatible pointer type
include/net/mac80211.h:2128: note: expected ‘struct ieee80211_vif *’ but argument is of type ‘struct ieee80211_hw *’

Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-tx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 58b132f..00da5e1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -1353,7 +1353,7 @@ int iwl_tx_agg_stop(struct iwl_priv *priv , const u8 *ra, u16 tid)
 	if (priv->stations[sta_id].tid[tid].agg.state ==
 				IWL_EMPTYING_HW_QUEUE_ADDBA) {
 		IWL_DEBUG_HT(priv, "AGG stop before setup done\n");
-		ieee80211_stop_tx_ba_cb_irqsafe(priv->hw, ra, tid);
+		ieee80211_stop_tx_ba_cb_irqsafe(priv->vif, ra, tid);
 		priv->stations[sta_id].tid[tid].agg.state = IWL_AGG_OFF;
 		return 0;
 	}
-- 
cgit v1.1


From e84217a9fc6264fe4e73fc85cdfff185b71b7443 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Thu, 26 Nov 2009 10:55:55 +0200
Subject: wl1251: remove false warning messages

There was a warning from wl1251_op_bss_info_changed():

wl1251: WARNING Set ctsprotect failed 0

It was printed always, it's completely false and can be removed.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1251_main.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
index ff4be7b..8353139d 100644
--- a/drivers/net/wireless/wl12xx/wl1251_main.c
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -1181,8 +1181,6 @@ static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
 					  wl->beacon_int, wl->dtim_period);
 			if (ret < 0)
 				goto out_sleep;
-			wl1251_warning("Set ctsprotect failed %d", ret);
-			goto out_sleep;
 		}
 	}
 
-- 
cgit v1.1


From de8df1ea489d80106ea82d4a6323e83d376913fb Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Thu, 26 Nov 2009 10:56:06 +0200
Subject: wl1251: fix bssid handling

bssid needs to be copied first in wl1251_op_bss_info_changed(), otherwise
templates will have incorrect bssid and power save will not work
correctly.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1251_main.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
index 8353139d..50d17fc 100644
--- a/drivers/net/wireless/wl12xx/wl1251_main.c
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -1110,6 +1110,21 @@ static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
 	if (ret < 0)
 		goto out;
 
+	if (changed & BSS_CHANGED_BSSID) {
+		memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN);
+
+		ret = wl1251_build_null_data(wl);
+		if (ret < 0)
+			goto out;
+
+		if (wl->bss_type != BSS_TYPE_IBSS) {
+			ret = wl1251_join(wl, wl->bss_type, wl->channel,
+					  wl->beacon_int, wl->dtim_period);
+			if (ret < 0)
+				goto out_sleep;
+		}
+	}
+
 	if (changed & BSS_CHANGED_ASSOC) {
 		if (bss_conf->assoc) {
 			wl->beacon_int = bss_conf->beacon_int;
@@ -1169,21 +1184,6 @@ static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
 		}
 	}
 
-	if (changed & BSS_CHANGED_BSSID) {
-		memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN);
-
-		ret = wl1251_build_null_data(wl);
-		if (ret < 0)
-			goto out;
-
-		if (wl->bss_type != BSS_TYPE_IBSS) {
-			ret = wl1251_join(wl, wl->bss_type, wl->channel,
-					  wl->beacon_int, wl->dtim_period);
-			if (ret < 0)
-				goto out_sleep;
-		}
-	}
-
 	if (changed & BSS_CHANGED_BEACON) {
 		beacon = ieee80211_beacon_get(hw, vif);
 		ret = wl1251_cmd_template_set(wl, CMD_BEACON, beacon->data,
-- 
cgit v1.1


From c14589eb3080636a2f71ebaf21ab9fd70ffc20cc Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Thu, 26 Nov 2009 10:56:13 +0200
Subject: wl1251: don't build null data template in wl1251_op_config()

The bssid can be zero when null data template is set in wl1251_op_config().
It's enough, and especially safe, to set it once after association.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/wl12xx/wl1251_main.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
index 50d17fc..2f50a25 100644
--- a/drivers/net/wireless/wl12xx/wl1251_main.c
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -629,10 +629,6 @@ static int wl1251_op_config(struct ieee80211_hw *hw, u32 changed)
 			goto out_sleep;
 	}
 
-	ret = wl1251_build_null_data(wl);
-	if (ret < 0)
-		goto out_sleep;
-
 	if (conf->flags & IEEE80211_CONF_PS && !wl->psm_requested) {
 		wl1251_debug(DEBUG_PSM, "psm enabled");
 
-- 
cgit v1.1


From bc83b6819289c031c439a5aa18ba0fd539d14f3e Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Sun, 29 Nov 2009 12:19:06 +0100
Subject: mac80211: recalculate idle later in MLME

hwsim testing has revealed that when the MLME
recalculates the idle state of the device, it
sometimes does so before sending the final
deauthentication or disassociation frame. This
patch changes the place where the idle state
is recalculated, but of course driver transmit
is typically asynchronous while configuration
is expected to be synchronous, so it doesn't
fix all possible cases yet.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/mlme.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 6dc7b5a..d8d50fb 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1083,8 +1083,6 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
 
 	ieee80211_set_wmm_default(sdata);
 
-	ieee80211_recalc_idle(local);
-
 	/* channel(_type) changes are handled by ieee80211_hw_config */
 	local->oper_channel_type = NL80211_CHAN_NO_HT;
 
@@ -1370,6 +1368,7 @@ ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
 
 	if (!wk) {
 		ieee80211_set_disassoc(sdata, true);
+		ieee80211_recalc_idle(sdata->local);
 	} else {
 		list_del(&wk->list);
 		kfree(wk);
@@ -1403,6 +1402,7 @@ ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
 			sdata->dev->name, mgmt->sa, reason_code);
 
 	ieee80211_set_disassoc(sdata, false);
+	ieee80211_recalc_idle(sdata->local);
 	return RX_MGMT_CFG80211_DISASSOC;
 }
 
@@ -2117,6 +2117,7 @@ static void ieee80211_sta_work(struct work_struct *work)
 				" after %dms, disconnecting.\n",
 				bssid, (1000 * IEEE80211_PROBE_WAIT)/HZ);
 			ieee80211_set_disassoc(sdata, true);
+			ieee80211_recalc_idle(local);
 			mutex_unlock(&ifmgd->mtx);
 			/*
 			 * must be outside lock due to cfg80211,
@@ -2560,6 +2561,8 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
 			IEEE80211_STYPE_DEAUTH, req->reason_code,
 			cookie);
 
+	ieee80211_recalc_idle(sdata->local);
+
 	return 0;
 }
 
@@ -2592,5 +2595,8 @@ int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata,
 	ieee80211_send_deauth_disassoc(sdata, req->bss->bssid,
 			IEEE80211_STYPE_DISASSOC, req->reason_code,
 			cookie);
+
+	ieee80211_recalc_idle(sdata->local);
+
 	return 0;
 }
-- 
cgit v1.1


From 7c3f4bbedc241ddcd3abe1f419c356e625231da1 Mon Sep 17 00:00:00 2001
From: Vivek Natarajan <vnatarajan@atheros.com>
Date: Mon, 30 Nov 2009 16:50:53 +0530
Subject: mac80211: Fix dynamic power save for scanning.

Not only ps_sdata but also IEEE80211_CONF_PS is to be considered
before restoring PS in scan_ps_disable(). For instance, when ps_sdata
is set but CONF_PS is not set just because the dynamic timer is still
running, a sw scan leads to setting of CONF_PS in scan_ps_disable
instead of restarting the dynamic PS timer.
Also for the above case, a null data frame is to be sent after
returning to operating channel which was not happening with the
current implementation. This patch fixes this too.

Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com>
Reviewed-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/ieee80211_i.h |  1 +
 net/mac80211/scan.c        | 20 ++++++++++++++++----
 2 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 419f186..91dc863 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -746,6 +746,7 @@ struct ieee80211_local {
 	unsigned int wmm_acm; /* bit field of ACM bits (BIT(802.1D tag)) */
 
 	bool pspolling;
+	bool scan_ps_enabled;
 	/*
 	 * PS can only be enabled when we have exactly one managed
 	 * interface (and monitors) in PS, this then points there.
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 4cf387c..f1a4c71 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -227,7 +227,8 @@ static bool ieee80211_prep_hw_scan(struct ieee80211_local *local)
 static void ieee80211_scan_ps_enable(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_local *local = sdata->local;
-	bool ps = false;
+
+	local->scan_ps_enabled = false;
 
 	/* FIXME: what to do when local->pspolling is true? */
 
@@ -235,12 +236,13 @@ static void ieee80211_scan_ps_enable(struct ieee80211_sub_if_data *sdata)
 	cancel_work_sync(&local->dynamic_ps_enable_work);
 
 	if (local->hw.conf.flags & IEEE80211_CONF_PS) {
-		ps = true;
+		local->scan_ps_enabled = true;
 		local->hw.conf.flags &= ~IEEE80211_CONF_PS;
 		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
 	}
 
-	if (!ps || !(local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK))
+	if (!(local->scan_ps_enabled) ||
+	    !(local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK))
 		/*
 		 * If power save was enabled, no need to send a nullfunc
 		 * frame because AP knows that we are sleeping. But if the
@@ -261,7 +263,7 @@ static void ieee80211_scan_ps_disable(struct ieee80211_sub_if_data *sdata)
 
 	if (!local->ps_sdata)
 		ieee80211_send_nullfunc(local, sdata, 0);
-	else {
+	else if (local->scan_ps_enabled) {
 		/*
 		 * In !IEEE80211_HW_PS_NULLFUNC_STACK case the hardware
 		 * will send a nullfunc frame with the powersave bit set
@@ -277,6 +279,16 @@ static void ieee80211_scan_ps_disable(struct ieee80211_sub_if_data *sdata)
 		 */
 		local->hw.conf.flags |= IEEE80211_CONF_PS;
 		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+	} else if (local->hw.conf.dynamic_ps_timeout > 0) {
+		/*
+		 * If IEEE80211_CONF_PS was not set and the dynamic_ps_timer
+		 * had been running before leaving the operating channel,
+		 * restart the timer now and send a nullfunc frame to inform
+		 * the AP that we are awake.
+		 */
+		ieee80211_send_nullfunc(local, sdata, 0);
+		mod_timer(&local->dynamic_ps_timer, jiffies +
+			  msecs_to_jiffies(local->hw.conf.dynamic_ps_timeout));
 	}
 }
 
-- 
cgit v1.1


From 0b5351a8e86292dfac1ca1451deaadb416a33cb8 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 30 Nov 2009 18:11:18 +0100
Subject: mwl8k: fix MCS bitmap size in SET_RATE command

The MCS bitmaps in the SET_RATE command structure were of the wrong
size, due to use of the wrong define for the array length.  Just
hardcode the lengths as 16, and do the same for the MCS bitmaps in
other command structures.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 0cb5ecc..f93eddda 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -634,7 +634,6 @@ struct ewc_ht_info {
 #define MWL8K_PEER_TYPE_ACCESSPOINT	2
 
 #define MWL8K_IEEE_LEGACY_DATA_RATES	13
-#define MWL8K_MCS_BITMAP_SIZE		16
 
 struct peer_capability_info {
 	/* Peer type - AP vs. STA.  */
@@ -655,7 +654,7 @@ struct peer_capability_info {
 	__u8	legacy_rates[MWL8K_IEEE_LEGACY_DATA_RATES];
 
 	/* HT rate table. Intersection of our rates and peer rates.  */
-	__u8	ht_rates[MWL8K_MCS_BITMAP_SIZE];
+	__u8	ht_rates[16];
 	__u8	pad[16];
 
 	/* If set, interoperability mode, no proprietary extensions.  */
@@ -2638,8 +2637,8 @@ struct mwl8k_cmd_update_rateset {
 	__u8	legacy_rates[MWL8K_RATE_INDEX_MAX_ARRAY];
 
 	/* Bitmap for supported MCS codes.  */
-	__u8	mcs_set[MWL8K_IEEE_LEGACY_DATA_RATES];
-	__u8	reserved[MWL8K_IEEE_LEGACY_DATA_RATES];
+	__u8	mcs_set[16];
+	__u8	reserved[16];
 } __attribute__((packed));
 
 static int mwl8k_update_rateset(struct ieee80211_hw *hw,
-- 
cgit v1.1


From 140eb5e2c1978622d7cd979d59a1c0586fe3bbdb Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 30 Nov 2009 18:11:44 +0100
Subject: mwl8k: fix UPDATE_STADB command struct legacy_rates array length

There exist 12 802.11b/g rates, but mwl8k supports two additional
(non-standard) rates, and includes those rates in rate bitmasks and
in its internal rate table that hardware rate indices index.

Commit "mwl8k: report rate and other information for received frames"
added one of the nonstandard rates to the mwl8k_rates table to make
the OFDM rates in the table line up with the rate indices that are
reported in the receive descriptor (so that we can just simply copy
the receive descriptor rate index into ieee80211_rx_status::rate_idx)
and bumped MWL8K_IEEE_LEGACY_DATA_RATES from 12 to 13, but this
screwed up the UPDATE_STADB command struct layout, as it also uses
that define, for its legacy_rates array.

To avoid having to convert rate indices and legacy rate bitmaps (e.g.
ieee80211_bss_conf::basic_rates) between the 12-rate mac80211 format
and the 14-rate mwl8k format, we'll report all 14 rates in our wiphy's
band, but filter out the nonstandard ones e.g. in the case of the
UPDATE_STADB command which only accepts 12 rates.

In the commands that accept 14 rates (SET_AID, SET_RATE), replace the
use of the MWL8K_RATE_INDEX_MAX_ARRAY define in the command struct by
the constant 14, to make it clearer that these commands accept 14 rates.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 51 +++++++++++---------------------------------
 1 file changed, 13 insertions(+), 38 deletions(-)

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index f93eddda..0251b61 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -184,7 +184,7 @@ struct mwl8k_priv {
 	/* PHY parameters */
 	struct ieee80211_supported_band band;
 	struct ieee80211_channel channels[14];
-	struct ieee80211_rate rates[13];
+	struct ieee80211_rate rates[14];
 
 	bool radio_on;
 	bool radio_short_preamble;
@@ -220,15 +220,6 @@ struct mwl8k_vif {
 	u8	bssid[ETH_ALEN];
 	u8	mac_addr[ETH_ALEN];
 
-	/*
-	 * Subset of supported legacy rates.
-	 * Intersection of AP and STA supported rates.
-	 */
-	struct ieee80211_rate legacy_rates[13];
-
-	/* number of supported legacy rates */
-	u8	legacy_nrates;
-
 	 /* Index into station database.Returned by update_sta_db call */
 	u8	peer_id;
 
@@ -266,6 +257,11 @@ static const struct ieee80211_rate mwl8k_rates[] = {
 	{ .bitrate = 360, .hw_value = 72, },
 	{ .bitrate = 480, .hw_value = 96, },
 	{ .bitrate = 540, .hw_value = 108, },
+	{ .bitrate = 720, .hw_value = 144, },
+};
+
+static const u8 mwl8k_rateids[12] = {
+	2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108,
 };
 
 /* Set or get info from Firmware */
@@ -633,8 +629,6 @@ struct ewc_ht_info {
 /* Peer Entry flags - used to define the type of the peer node */
 #define MWL8K_PEER_TYPE_ACCESSPOINT	2
 
-#define MWL8K_IEEE_LEGACY_DATA_RATES	13
-
 struct peer_capability_info {
 	/* Peer type - AP vs. STA.  */
 	__u8	peer_type;
@@ -651,7 +645,7 @@ struct peer_capability_info {
 	struct ewc_ht_info	ewc_info;
 
 	/* Legacy rate table. Intersection of our rates and peer rates.  */
-	__u8	legacy_rates[MWL8K_IEEE_LEGACY_DATA_RATES];
+	__u8	legacy_rates[12];
 
 	/* HT rate table. Intersection of our rates and peer rates.  */
 	__u8	ht_rates[16];
@@ -2514,9 +2508,7 @@ static int mwl8k_cmd_update_sta_db(struct ieee80211_hw *hw,
 	struct ieee80211_bss_conf *info = &mv_vif->bss_info;
 	struct mwl8k_cmd_update_sta_db *cmd;
 	struct peer_capability_info *peer_info;
-	struct ieee80211_rate *bitrates = mv_vif->legacy_rates;
 	int rc;
-	__u8 count, *rates;
 
 	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
 	if (cmd == NULL)
@@ -2535,13 +2527,11 @@ static int mwl8k_cmd_update_sta_db(struct ieee80211_hw *hw,
 		/* Build peer_info block */
 		peer_info->peer_type = MWL8K_PEER_TYPE_ACCESSPOINT;
 		peer_info->basic_caps = cpu_to_le16(info->assoc_capability);
+		memcpy(peer_info->legacy_rates, mwl8k_rateids,
+		       sizeof(mwl8k_rateids));
 		peer_info->interop = 1;
 		peer_info->amsdu_enabled = 0;
 
-		rates = peer_info->legacy_rates;
-		for (count = 0; count < mv_vif->legacy_nrates; count++)
-			rates[count] = bitrates[count].hw_value;
-
 		rc = mwl8k_post_cmd(hw, &cmd->header);
 		if (rc == 0)
 			mv_vif->peer_id = peer_info->station_id;
@@ -2564,8 +2554,6 @@ static int mwl8k_cmd_update_sta_db(struct ieee80211_hw *hw,
 /*
  * CMD_SET_AID.
  */
-#define MWL8K_RATE_INDEX_MAX_ARRAY			14
-
 #define MWL8K_FRAME_PROT_DISABLED			0x00
 #define MWL8K_FRAME_PROT_11G				0x07
 #define MWL8K_FRAME_PROT_11N_HT_40MHZ_ONLY		0x02
@@ -2578,7 +2566,7 @@ struct mwl8k_cmd_update_set_aid {
 	 /* AP's MAC address (BSSID) */
 	__u8	bssid[ETH_ALEN];
 	__le16	protection_mode;
-	__u8	supp_rates[MWL8K_RATE_INDEX_MAX_ARRAY];
+	__u8	supp_rates[14];
 } __attribute__((packed));
 
 static int mwl8k_cmd_set_aid(struct ieee80211_hw *hw,
@@ -2587,8 +2575,6 @@ static int mwl8k_cmd_set_aid(struct ieee80211_hw *hw,
 	struct mwl8k_vif *mv_vif = MWL8K_VIF(vif);
 	struct ieee80211_bss_conf *info = &mv_vif->bss_info;
 	struct mwl8k_cmd_update_set_aid *cmd;
-	struct ieee80211_rate *bitrates = mv_vif->legacy_rates;
-	int count;
 	u16 prot_mode;
 	int rc;
 
@@ -2620,8 +2606,7 @@ static int mwl8k_cmd_set_aid(struct ieee80211_hw *hw,
 	}
 	cmd->protection_mode = cpu_to_le16(prot_mode);
 
-	for (count = 0; count < mv_vif->legacy_nrates; count++)
-		cmd->supp_rates[count] = bitrates[count].hw_value;
+	memcpy(cmd->supp_rates, mwl8k_rateids, sizeof(mwl8k_rateids));
 
 	rc = mwl8k_post_cmd(hw, &cmd->header);
 	kfree(cmd);
@@ -2634,7 +2619,7 @@ static int mwl8k_cmd_set_aid(struct ieee80211_hw *hw,
  */
 struct mwl8k_cmd_update_rateset {
 	struct	mwl8k_cmd_pkt header;
-	__u8	legacy_rates[MWL8K_RATE_INDEX_MAX_ARRAY];
+	__u8	legacy_rates[14];
 
 	/* Bitmap for supported MCS codes.  */
 	__u8	mcs_set[16];
@@ -2644,10 +2629,7 @@ struct mwl8k_cmd_update_rateset {
 static int mwl8k_update_rateset(struct ieee80211_hw *hw,
 		struct ieee80211_vif *vif)
 {
-	struct mwl8k_vif *mv_vif = MWL8K_VIF(vif);
 	struct mwl8k_cmd_update_rateset *cmd;
-	struct ieee80211_rate *bitrates = mv_vif->legacy_rates;
-	int count;
 	int rc;
 
 	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
@@ -2656,9 +2638,7 @@ static int mwl8k_update_rateset(struct ieee80211_hw *hw,
 
 	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_RATE);
 	cmd->header.length = cpu_to_le16(sizeof(*cmd));
-
-	for (count = 0; count < mv_vif->legacy_nrates; count++)
-		cmd->legacy_rates[count] = bitrates[count].hw_value;
+	memcpy(cmd->legacy_rates, mwl8k_rateids, sizeof(mwl8k_rateids));
 
 	rc = mwl8k_post_cmd(hw, &cmd->header);
 	kfree(cmd);
@@ -2931,11 +2911,6 @@ static int mwl8k_add_interface(struct ieee80211_hw *hw,
 	/* Back pointer to parent config block */
 	mwl8k_vif->priv = priv;
 
-	/* Setup initial PHY parameters */
-	memcpy(mwl8k_vif->legacy_rates,
-		priv->rates, sizeof(mwl8k_vif->legacy_rates));
-	mwl8k_vif->legacy_nrates = ARRAY_SIZE(priv->rates);
-
 	/* Set Initial sequence number to zero */
 	mwl8k_vif->seqno = 0;
 
-- 
cgit v1.1


From 20f09c3df7a8a623c290f62596c1a6b0da088030 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 30 Nov 2009 18:12:08 +0100
Subject: mwl8k: prevent corruption of QoS field on receive

Packets exchanged between the mwl8k driver and the firmware always
have a 4-address header without QoS field.  For QoS packets, the QoS
field is passed to/from the firmware via the tx/rx descriptors.

We were handling this correctly on transmit, but not on receive -- if
a QoS packet was received, we would leave garbage in the QoS field in
the packet passed up to the stack, which is Bad(tm).

Also, if the packet received on the air was a 4-address without QoS
packet, we would forget to skb_pull the 2-byte DMA length prefix off.

This patch adds an argument to the ->rxd_process() receive descriptor
operation to retrieve the QoS field from the receive descriptor, and
extends mwl8k_remove_dma_header() to insert this field back into the
packet if the packet received is a QoS packet.  It also fixes
mwl8k_remove_dma_header() to strip off the length prefix in all cases.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 46 +++++++++++++++++++++++++++++---------------
 1 file changed, 31 insertions(+), 15 deletions(-)

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 0251b61..6b12d81 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -84,7 +84,8 @@ struct rxd_ops {
 	int rxd_size;
 	void (*rxd_init)(void *rxd, dma_addr_t next_dma_addr);
 	void (*rxd_refill)(void *rxd, dma_addr_t addr, int len);
-	int (*rxd_process)(void *rxd, struct ieee80211_rx_status *status);
+	int (*rxd_process)(void *rxd, struct ieee80211_rx_status *status,
+			   __le16 *qos);
 };
 
 struct mwl8k_device_info {
@@ -699,21 +700,29 @@ static inline u16 mwl8k_qos_setbit_qlen(u16 qos, u8 len)
 struct mwl8k_dma_data {
 	__le16 fwlen;
 	struct ieee80211_hdr wh;
+	char data[0];
 } __attribute__((packed));
 
 /* Routines to add/remove DMA header from skb.  */
-static inline void mwl8k_remove_dma_header(struct sk_buff *skb)
+static inline void mwl8k_remove_dma_header(struct sk_buff *skb, __le16 qos)
 {
-	struct mwl8k_dma_data *tr = (struct mwl8k_dma_data *)skb->data;
-	void *dst, *src = &tr->wh;
-	int hdrlen = ieee80211_hdrlen(tr->wh.frame_control);
-	u16 space = sizeof(struct mwl8k_dma_data) - hdrlen;
+	struct mwl8k_dma_data *tr;
+	int hdrlen;
+
+	tr = (struct mwl8k_dma_data *)skb->data;
+	hdrlen = ieee80211_hdrlen(tr->wh.frame_control);
 
-	dst = (void *)tr + space;
-	if (dst != src) {
-		memmove(dst, src, hdrlen);
-		skb_pull(skb, space);
+	if (hdrlen != sizeof(tr->wh)) {
+		if (ieee80211_is_data_qos(tr->wh.frame_control)) {
+			memmove(tr->data - hdrlen, &tr->wh, hdrlen - 2);
+			*((__le16 *)(tr->data - 2)) = qos;
+		} else {
+			memmove(tr->data - hdrlen, &tr->wh, hdrlen);
+		}
 	}
+
+	if (hdrlen != sizeof(*tr))
+		skb_pull(skb, sizeof(*tr) - hdrlen);
 }
 
 static inline void mwl8k_add_dma_header(struct sk_buff *skb)
@@ -793,7 +802,8 @@ static void mwl8k_rxd_8366_refill(void *_rxd, dma_addr_t addr, int len)
 }
 
 static int
-mwl8k_rxd_8366_process(void *_rxd, struct ieee80211_rx_status *status)
+mwl8k_rxd_8366_process(void *_rxd, struct ieee80211_rx_status *status,
+		       __le16 *qos)
 {
 	struct mwl8k_rxd_8366 *rxd = _rxd;
 
@@ -823,6 +833,8 @@ mwl8k_rxd_8366_process(void *_rxd, struct ieee80211_rx_status *status)
 	status->band = IEEE80211_BAND_2GHZ;
 	status->freq = ieee80211_channel_to_frequency(rxd->channel);
 
+	*qos = rxd->qos_control;
+
 	return le16_to_cpu(rxd->pkt_len);
 }
 
@@ -881,7 +893,8 @@ static void mwl8k_rxd_8687_refill(void *_rxd, dma_addr_t addr, int len)
 }
 
 static int
-mwl8k_rxd_8687_process(void *_rxd, struct ieee80211_rx_status *status)
+mwl8k_rxd_8687_process(void *_rxd, struct ieee80211_rx_status *status,
+		       __le16 *qos)
 {
 	struct mwl8k_rxd_8687 *rxd = _rxd;
 	u16 rate_info;
@@ -912,6 +925,8 @@ mwl8k_rxd_8687_process(void *_rxd, struct ieee80211_rx_status *status)
 	status->band = IEEE80211_BAND_2GHZ;
 	status->freq = ieee80211_channel_to_frequency(rxd->channel);
 
+	*qos = rxd->qos_control;
+
 	return le16_to_cpu(rxd->pkt_len);
 }
 
@@ -1083,6 +1098,7 @@ static int rxq_process(struct ieee80211_hw *hw, int index, int limit)
 		void *rxd;
 		int pkt_len;
 		struct ieee80211_rx_status status;
+		__le16 qos;
 
 		skb = rxq->buf[rxq->head].skb;
 		if (skb == NULL)
@@ -1090,7 +1106,7 @@ static int rxq_process(struct ieee80211_hw *hw, int index, int limit)
 
 		rxd = rxq->rxd + (rxq->head * priv->rxd_ops->rxd_size);
 
-		pkt_len = priv->rxd_ops->rxd_process(rxd, &status);
+		pkt_len = priv->rxd_ops->rxd_process(rxd, &status, &qos);
 		if (pkt_len < 0)
 			break;
 
@@ -1108,7 +1124,7 @@ static int rxq_process(struct ieee80211_hw *hw, int index, int limit)
 		rxq->rxd_count--;
 
 		skb_put(skb, pkt_len);
-		mwl8k_remove_dma_header(skb);
+		mwl8k_remove_dma_header(skb, qos);
 
 		/*
 		 * Check for a pending join operation.  Save a
@@ -1354,7 +1370,7 @@ static void mwl8k_txq_reclaim(struct ieee80211_hw *hw, int index, int force)
 		BUG_ON(skb == NULL);
 		pci_unmap_single(priv->pdev, addr, size, PCI_DMA_TODEVICE);
 
-		mwl8k_remove_dma_header(skb);
+		mwl8k_remove_dma_header(skb, tx_desc->qos_control);
 
 		/* Mark descriptor as unused */
 		tx_desc->pkt_phys_addr = 0;
-- 
cgit v1.1


From ca00930153c14b323c31b97623ac5c4f7855ed6a Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 30 Nov 2009 18:12:20 +0100
Subject: mwl8k: fix addr4 zeroing and payload overwrite on DMA header creation

When inserting a DMA header into a packet for transmission,
mwl8k_add_dma_header() would blindly zero the addr4 field, which
is not a good idea if the packet being transmitted is actually a
4-address packet.

Also, if the transmitted packet was a 4-address with QoS packet,
the memmove() to do the needed header reshuffling would inadvertently
overwrite the first two bytes of the packet payload with the QoS field.

This fixes both of these issues.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 29 +++++++++++++++--------------
 1 file changed, 15 insertions(+), 14 deletions(-)

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 6b12d81..c1cb20f 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -728,35 +728,36 @@ static inline void mwl8k_remove_dma_header(struct sk_buff *skb, __le16 qos)
 static inline void mwl8k_add_dma_header(struct sk_buff *skb)
 {
 	struct ieee80211_hdr *wh;
-	u32 hdrlen, pktlen;
+	int hdrlen;
 	struct mwl8k_dma_data *tr;
 
+	/*
+	 * Add a firmware DMA header; the firmware requires that we
+	 * present a 2-byte payload length followed by a 4-address
+	 * header (without QoS field), followed (optionally) by any
+	 * WEP/ExtIV header (but only filled in for CCMP).
+	 */
 	wh = (struct ieee80211_hdr *)skb->data;
+
 	hdrlen = ieee80211_hdrlen(wh->frame_control);
-	pktlen = skb->len;
+	if (hdrlen != sizeof(*tr))
+		skb_push(skb, sizeof(*tr) - hdrlen);
 
-	/*
-	 * Copy up/down the 802.11 header; the firmware requires
-	 * we present a 2-byte payload length followed by a
-	 * 4-address header (w/o QoS), followed (optionally) by
-	 * any WEP/ExtIV header (but only filled in for CCMP).
-	 */
-	if (hdrlen != sizeof(struct mwl8k_dma_data))
-		skb_push(skb, sizeof(struct mwl8k_dma_data) - hdrlen);
+	if (ieee80211_is_data_qos(wh->frame_control))
+		hdrlen -= 2;
 
 	tr = (struct mwl8k_dma_data *)skb->data;
 	if (wh != &tr->wh)
 		memmove(&tr->wh, wh, hdrlen);
-
-	/* Clear addr4 */
-	memset(tr->wh.addr4, 0, ETH_ALEN);
+	if (hdrlen != sizeof(tr->wh))
+		memset(((void *)&tr->wh) + hdrlen, 0, sizeof(tr->wh) - hdrlen);
 
 	/*
 	 * Firmware length is the length of the fully formed "802.11
 	 * payload".  That is, everything except for the 802.11 header.
 	 * This includes all crypto material including the MIC.
 	 */
-	tr->fwlen = cpu_to_le16(pktlen - hdrlen);
+	tr->fwlen = cpu_to_le16(skb->len - sizeof(*tr));
 }
 
 
-- 
cgit v1.1


From 8e9f33f0ced82a797d285b233e1c956cbd5c7de3 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 30 Nov 2009 18:12:35 +0100
Subject: mwl8k: properly report rate on received 40MHz packets

On 8366, bit 6 in the rx descriptor rate field indicates whether the
packet was received on a 20MHz or 40MHz channel, and is not part of
the MCS index.  Handle this properly, which then prevents hitting the
WARN_ON and being dropped in ieee80211_rx().

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index c1cb20f..f1566f9 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -782,6 +782,10 @@ struct mwl8k_rxd_8366 {
 	__u8 rx_ctrl;
 } __attribute__((packed));
 
+#define MWL8K_8366_RATE_INFO_MCS_FORMAT		0x80
+#define MWL8K_8366_RATE_INFO_40MHZ		0x40
+#define MWL8K_8366_RATE_INFO_RATEID(x)		((x) & 0x3f)
+
 #define MWL8K_8366_RX_CTRL_OWNED_BY_HOST	0x80
 
 static void mwl8k_rxd_8366_init(void *_rxd, dma_addr_t next_dma_addr)
@@ -817,9 +821,11 @@ mwl8k_rxd_8366_process(void *_rxd, struct ieee80211_rx_status *status,
 	status->signal = -rxd->rssi;
 	status->noise = -rxd->noise_floor;
 
-	if (rxd->rate & 0x80) {
+	if (rxd->rate & MWL8K_8366_RATE_INFO_MCS_FORMAT) {
 		status->flag |= RX_FLAG_HT;
-		status->rate_idx = rxd->rate & 0x7f;
+		if (rxd->rate & MWL8K_8366_RATE_INFO_40MHZ)
+			status->flag |= RX_FLAG_40MHZ;
+		status->rate_idx = MWL8K_8366_RATE_INFO_RATEID(rxd->rate);
 	} else {
 		int i;
 
-- 
cgit v1.1


From 0c9cc640225f4bd7c9aad87b1431bd8d9a29b338 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 30 Nov 2009 18:12:49 +0100
Subject: mwl8k: allow more time for firmware commands to complete

Some firmware commands can under some circumstances take more than 2
seconds to complete.  This patch bumps the timeout up to 10 seconds,
and prints a message whenever a command takes more than 2 seconds.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index f1566f9..793a83e 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -1579,8 +1579,8 @@ static void mwl8k_fw_unlock(struct ieee80211_hw *hw)
  * Command processing.
  */
 
-/* Timeout firmware commands after 2000ms */
-#define MWL8K_CMD_TIMEOUT_MS	2000
+/* Timeout firmware commands after 10s */
+#define MWL8K_CMD_TIMEOUT_MS	10000
 
 static int mwl8k_post_cmd(struct ieee80211_hw *hw, struct mwl8k_cmd_pkt *cmd)
 {
@@ -1631,12 +1631,21 @@ static int mwl8k_post_cmd(struct ieee80211_hw *hw, struct mwl8k_cmd_pkt *cmd)
 		       MWL8K_CMD_TIMEOUT_MS);
 		rc = -ETIMEDOUT;
 	} else {
+		int ms;
+
+		ms = MWL8K_CMD_TIMEOUT_MS - jiffies_to_msecs(timeout);
+
 		rc = cmd->result ? -EINVAL : 0;
 		if (rc)
 			printk(KERN_ERR "%s: Command %s error 0x%x\n",
 			       wiphy_name(hw->wiphy),
 			       mwl8k_cmd_name(cmd->code, buf, sizeof(buf)),
 			       le16_to_cpu(cmd->result));
+		else if (ms > 2000)
+			printk(KERN_NOTICE "%s: Command %s took %d ms\n",
+			       wiphy_name(hw->wiphy),
+			       mwl8k_cmd_name(cmd->code, buf, sizeof(buf)),
+			       ms);
 	}
 
 	return rc;
-- 
cgit v1.1


From 7e1112d34aea10fdd689422e6bdc918309043bf3 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 30 Nov 2009 18:13:04 +0100
Subject: mwl8k: allow more time for transmit rings to drain

Before issuing any firmware commands, we wait for the transmit rings
to drain, to prevent control versus data path synchronization issues.
In some cases, this can end up taking longer than the current hardcoded
limit of 5 seconds, for example if the transmit rings are filled with
packets for a host that has dropped off the air and we end up
retransmitting every pending packet at the lowest rate a couple of
times.

This patch changes mwl8k_tx_wait_empty() to only bail out on timeout
expiry if there was no change in the number of packets pending in the
transmit rings during the waiting period.  If at least one transmit
ring entry was reclaimed while we were waiting, we are apparently still
making progress, and we'll allow waiting for another timeout period.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 127 +++++++++++++++++++++++--------------------
 1 file changed, 67 insertions(+), 60 deletions(-)

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 793a83e..a1625581 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -1237,99 +1237,106 @@ static inline void mwl8k_tx_start(struct mwl8k_priv *priv)
 	ioread32(priv->regs + MWL8K_HIU_INT_CODE);
 }
 
-struct mwl8k_txq_info {
-	u32 fw_owned;
-	u32 drv_owned;
-	u32 unused;
-	u32 len;
-	u32 head;
-	u32 tail;
-};
-
-static int mwl8k_scan_tx_ring(struct mwl8k_priv *priv,
-				struct mwl8k_txq_info *txinfo)
+static void mwl8k_dump_tx_rings(struct ieee80211_hw *hw)
 {
-	int count, desc, status;
-	struct mwl8k_tx_queue *txq;
-	struct mwl8k_tx_desc *tx_desc;
-	int ndescs = 0;
+	struct mwl8k_priv *priv = hw->priv;
+	int i;
 
-	memset(txinfo, 0, MWL8K_TX_QUEUES * sizeof(struct mwl8k_txq_info));
+	for (i = 0; i < MWL8K_TX_QUEUES; i++) {
+		struct mwl8k_tx_queue *txq = priv->txq + i;
+		int fw_owned = 0;
+		int drv_owned = 0;
+		int unused = 0;
+		int desc;
 
-	for (count = 0; count < MWL8K_TX_QUEUES; count++) {
-		txq = priv->txq + count;
-		txinfo[count].len = txq->stats.len;
-		txinfo[count].head = txq->head;
-		txinfo[count].tail = txq->tail;
 		for (desc = 0; desc < MWL8K_TX_DESCS; desc++) {
-			tx_desc = txq->txd + desc;
-			status = le32_to_cpu(tx_desc->status);
+			struct mwl8k_tx_desc *tx_desc = txq->txd + desc;
+			u32 status;
 
+			status = le32_to_cpu(tx_desc->status);
 			if (status & MWL8K_TXD_STATUS_FW_OWNED)
-				txinfo[count].fw_owned++;
+				fw_owned++;
 			else
-				txinfo[count].drv_owned++;
+				drv_owned++;
 
 			if (tx_desc->pkt_len == 0)
-				txinfo[count].unused++;
+				unused++;
 		}
-	}
 
-	return ndescs;
+		printk(KERN_ERR "%s: txq[%d] len=%d head=%d tail=%d "
+		       "fw_owned=%d drv_owned=%d unused=%d\n",
+		       wiphy_name(hw->wiphy), i,
+		       txq->stats.len, txq->head, txq->tail,
+		       fw_owned, drv_owned, unused);
+	}
 }
 
 /*
  * Must be called with priv->fw_mutex held and tx queues stopped.
  */
+#define MWL8K_TX_WAIT_TIMEOUT_MS	1000
+
 static int mwl8k_tx_wait_empty(struct ieee80211_hw *hw)
 {
 	struct mwl8k_priv *priv = hw->priv;
 	DECLARE_COMPLETION_ONSTACK(tx_wait);
-	u32 count;
-	unsigned long timeout;
+	int retry;
+	int rc;
 
 	might_sleep();
 
+	/*
+	 * The TX queues are stopped at this point, so this test
+	 * doesn't need to take ->tx_lock.
+	 */
+	if (!priv->pending_tx_pkts)
+		return 0;
+
+	retry = 0;
+	rc = 0;
+
 	spin_lock_bh(&priv->tx_lock);
-	count = priv->pending_tx_pkts;
-	if (count)
-		priv->tx_wait = &tx_wait;
-	spin_unlock_bh(&priv->tx_lock);
+	priv->tx_wait = &tx_wait;
+	while (!rc) {
+		int oldcount;
+		unsigned long timeout;
 
-	if (count) {
-		struct mwl8k_txq_info txinfo[MWL8K_TX_QUEUES];
-		int index;
-		int newcount;
+		oldcount = priv->pending_tx_pkts;
 
+		spin_unlock_bh(&priv->tx_lock);
 		timeout = wait_for_completion_timeout(&tx_wait,
-					msecs_to_jiffies(5000));
-		if (timeout)
-			return 0;
-
+			    msecs_to_jiffies(MWL8K_TX_WAIT_TIMEOUT_MS));
 		spin_lock_bh(&priv->tx_lock);
-		priv->tx_wait = NULL;
-		newcount = priv->pending_tx_pkts;
-		mwl8k_scan_tx_ring(priv, txinfo);
-		spin_unlock_bh(&priv->tx_lock);
 
-		printk(KERN_ERR "%s(%u) TIMEDOUT:5000ms Pend:%u-->%u\n",
-		       __func__, __LINE__, count, newcount);
+		if (timeout) {
+			WARN_ON(priv->pending_tx_pkts);
+			if (retry) {
+				printk(KERN_NOTICE "%s: tx rings drained\n",
+				       wiphy_name(hw->wiphy));
+			}
+			break;
+		}
 
-		for (index = 0; index < MWL8K_TX_QUEUES; index++)
-			printk(KERN_ERR "TXQ:%u L:%u H:%u T:%u FW:%u "
-			       "DRV:%u U:%u\n",
-					index,
-					txinfo[index].len,
-					txinfo[index].head,
-					txinfo[index].tail,
-					txinfo[index].fw_owned,
-					txinfo[index].drv_owned,
-					txinfo[index].unused);
+		if (priv->pending_tx_pkts < oldcount) {
+			printk(KERN_NOTICE "%s: timeout waiting for tx "
+			       "rings to drain (%d -> %d pkts), retrying\n",
+			       wiphy_name(hw->wiphy), oldcount,
+			       priv->pending_tx_pkts);
+			retry = 1;
+			continue;
+		}
+
+		priv->tx_wait = NULL;
+
+		printk(KERN_ERR "%s: tx rings stuck for %d ms\n",
+		       wiphy_name(hw->wiphy), MWL8K_TX_WAIT_TIMEOUT_MS);
+		mwl8k_dump_tx_rings(hw);
 
-		return -ETIMEDOUT;
+		rc = -ETIMEDOUT;
 	}
+	spin_unlock_bh(&priv->tx_lock);
 
-	return 0;
+	return rc;
 }
 
 #define MWL8K_TXD_SUCCESS(status)				\
-- 
cgit v1.1


From 89b872e2e476833cde8aaac658c75817f67e8f81 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 30 Nov 2009 18:13:20 +0100
Subject: mwl8k: increase firmware loading timeouts

The time between loading the helper image and starting to upload the
main firmware image should be at least 5 ms or so.  We were doing an
msleep(1) before, and 1 ms appears to not be enough in almost all
cases, but building with HZ=100 has always masked this so far.  Bumping
the msleep argument to 5 fixes firmware loading e.g. when HZ=1000.

Some firmware images need more than 200ms to initialize.  Bump the
ready code timeout to 500ms to accommodate for this.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index a1625581..e59a926 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -571,7 +571,7 @@ static int mwl8k_load_firmware(struct ieee80211_hw *hw)
 			       "helper image\n", pci_name(priv->pdev));
 			return rc;
 		}
-		msleep(1);
+		msleep(5);
 
 		rc = mwl8k_feed_fw_image(priv, fw->data, fw->size);
 	} else {
@@ -588,9 +588,8 @@ static int mwl8k_load_firmware(struct ieee80211_hw *hw)
 		iowrite32(MWL8K_MODE_AP, priv->regs + MWL8K_HIU_GEN_PTR);
 	else
 		iowrite32(MWL8K_MODE_STA, priv->regs + MWL8K_HIU_GEN_PTR);
-	msleep(1);
 
-	loops = 200000;
+	loops = 500000;
 	do {
 		u32 ready_code;
 
-- 
cgit v1.1


From 3db95e50c8813d8ed04a1ec7cd7b77dba7c81c80 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 30 Nov 2009 18:13:34 +0100
Subject: mwl8k: don't forget to call pci_disable_device()

Don't forget to call pci_disable_device() if pci_request_regions()
fails during probe.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index e59a926..76a6071 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -3378,7 +3378,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 	if (rc) {
 		printk(KERN_ERR "%s: Cannot obtain PCI resources\n",
 		       MWL8K_NAME);
-		return rc;
+		goto err_disable_device;
 	}
 
 	pci_set_master(pdev);
@@ -3609,6 +3609,8 @@ err_iounmap:
 
 err_free_reg:
 	pci_release_regions(pdev);
+
+err_disable_device:
 	pci_disable_device(pdev);
 
 	return rc;
-- 
cgit v1.1


From d8a8dd8f07aed82492c089ad13fd3d7476b692fd Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 30 Nov 2009 18:13:42 +0100
Subject: mwl8k: struct ieee80211_rx_status::qual is deprecated

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 76a6071..2e9da9a 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -915,7 +915,6 @@ mwl8k_rxd_8687_process(void *_rxd, struct ieee80211_rx_status *status,
 
 	status->signal = -rxd->rssi;
 	status->noise = -rxd->noise_level;
-	status->qual = rxd->link_quality;
 	status->antenna = MWL8K_8687_RATE_INFO_ANTSELECT(rate_info);
 	status->rate_idx = MWL8K_8687_RATE_INFO_RATEID(rate_info);
 
-- 
cgit v1.1


From d1844d77692de3158ad458ed4c7b86d78ab4085e Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 30 Nov 2009 18:13:56 +0100
Subject: mwl8k: don't overwrite mwl8k_vif::bssid until after disassociation

When disassociating, mac80211 zeroes vif->bss_info.bssid before
calling our ->bss_info_changed(), but we need the BSSID to remove the
hardware station database entry for our AP, so we can't clear our
local copy of the BSSID until after we've done that.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 2e9da9a..ea1173f 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -3025,9 +3025,6 @@ static void mwl8k_bss_info_changed(struct ieee80211_hw *hw,
 	struct mwl8k_vif *mwl8k_vif = MWL8K_VIF(vif);
 	int rc;
 
-	if (changed & BSS_CHANGED_BSSID)
-		memcpy(mwl8k_vif->bssid, info->bssid, ETH_ALEN);
-
 	if ((changed & BSS_CHANGED_ASSOC) == 0)
 		return;
 
@@ -3041,6 +3038,8 @@ static void mwl8k_bss_info_changed(struct ieee80211_hw *hw,
 		memcpy(&mwl8k_vif->bss_info, info,
 			sizeof(struct ieee80211_bss_conf));
 
+		memcpy(mwl8k_vif->bssid, info->bssid, ETH_ALEN);
+
 		/* Install rates */
 		rc = mwl8k_update_rateset(hw, vif);
 		if (rc)
-- 
cgit v1.1


From 16cec43da50c4b4702653ca710549fd3457a4e6c Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 30 Nov 2009 18:14:23 +0100
Subject: mwl8k: don't complain about oversized beacons in FINALIZE_JOIN

The FINALIZE_JOIN firmware command only looks at the first couple of
fields in the beacon, and therefore it's not necessary to complain if
the beacon is longer than 128 bytes.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwl8k.c | 29 ++++++++---------------------
 1 file changed, 8 insertions(+), 21 deletions(-)

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index ea1173f..59d4915 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -2469,8 +2469,6 @@ mwl8k_set_edca_params(struct ieee80211_hw *hw, __u8 qnum,
 /*
  * CMD_FINALIZE_JOIN.
  */
-
-/* FJ beacon buffer size is compiled into the firmware.  */
 #define MWL8K_FJ_BEACON_MAXLEN	128
 
 struct mwl8k_cmd_finalize_join {
@@ -2480,17 +2478,13 @@ struct mwl8k_cmd_finalize_join {
 } __attribute__((packed));
 
 static int mwl8k_finalize_join(struct ieee80211_hw *hw, void *frame,
-				__u16 framelen, __u16 dtim)
+			       int framelen, int dtim)
 {
 	struct mwl8k_cmd_finalize_join *cmd;
 	struct ieee80211_mgmt *payload = frame;
-	u16 hdrlen;
-	u32 payload_len;
+	int payload_len;
 	int rc;
 
-	if (frame == NULL)
-		return -EINVAL;
-
 	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
 	if (cmd == NULL)
 		return -ENOMEM;
@@ -2499,24 +2493,17 @@ static int mwl8k_finalize_join(struct ieee80211_hw *hw, void *frame,
 	cmd->header.length = cpu_to_le16(sizeof(*cmd));
 	cmd->sleep_interval = cpu_to_le32(dtim ? dtim : 1);
 
-	hdrlen = ieee80211_hdrlen(payload->frame_control);
-
-	payload_len = framelen > hdrlen ? framelen - hdrlen : 0;
-
-	/* XXX TBD Might just have to abort and return an error */
-	if (payload_len > MWL8K_FJ_BEACON_MAXLEN)
-		printk(KERN_ERR "%s(): WARNING: Incomplete beacon "
-		       "sent to firmware. Sz=%u MAX=%u\n", __func__,
-		       payload_len, MWL8K_FJ_BEACON_MAXLEN);
-
-	if (payload_len > MWL8K_FJ_BEACON_MAXLEN)
+	payload_len = framelen - ieee80211_hdrlen(payload->frame_control);
+	if (payload_len < 0)
+		payload_len = 0;
+	else if (payload_len > MWL8K_FJ_BEACON_MAXLEN)
 		payload_len = MWL8K_FJ_BEACON_MAXLEN;
 
-	if (payload && payload_len)
-		memcpy(cmd->beacon_data, &payload->u.beacon, payload_len);
+	memcpy(cmd->beacon_data, &payload->u.beacon, payload_len);
 
 	rc = mwl8k_post_cmd(hw, &cmd->header);
 	kfree(cmd);
+
 	return rc;
 }
 
-- 
cgit v1.1


From 02f7f1793023bd8e5e277ad349f6f43f8c284fb0 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Thu, 3 Dec 2009 20:45:07 -0800
Subject: net/rfkill/core.c: work around gcc-4.0.2 silliness

net/rfkill/core.c: In function 'rfkill_type_show':
net/rfkill/core.c:610: warning: control may reach end of non-void function 'rfkill_get_type_str' being inlined

A gcc bug, but simple enough to squish.

Cc: John W. Linville <linville@tuxdriver.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/rfkill/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/rfkill/core.c b/net/rfkill/core.c
index 448e5a0..c218e07 100644
--- a/net/rfkill/core.c
+++ b/net/rfkill/core.c
@@ -579,6 +579,8 @@ static ssize_t rfkill_name_show(struct device *dev,
 
 static const char *rfkill_get_type_str(enum rfkill_type type)
 {
+	BUILD_BUG_ON(NUM_RFKILL_TYPES != RFKILL_TYPE_FM + 1);
+
 	switch (type) {
 	case RFKILL_TYPE_WLAN:
 		return "wlan";
@@ -597,8 +599,6 @@ static const char *rfkill_get_type_str(enum rfkill_type type)
 	default:
 		BUG();
 	}
-
-	BUILD_BUG_ON(NUM_RFKILL_TYPES != RFKILL_TYPE_FM + 1);
 }
 
 static ssize_t rfkill_type_show(struct device *dev,
-- 
cgit v1.1


From 1814077fd12a9cdf478c10076e9c42094e9d9250 Mon Sep 17 00:00:00 2001
From: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Date: Fri, 4 Dec 2009 17:41:34 +0530
Subject: mac80211: Fix bug in computing crc over dynamic IEs in beacon

On a 32-bit machine, BIT() macro does not give the required
bit value if the bit is mroe than 31. In ieee802_11_parse_elems_crc(),
BIT() is suppossed to get the bit value more than 31 (42 (id of ERP_INFO_IE),
37 (CHANNEL_SWITCH_IE), (42), 32 (POWER_CONSTRAINT_IE), 45 (HT_CAP_IE),
61 (HT_INFO_IE)). As we do not get the required bit value for the above
IEs, crc over these IEs are never calculated, so any dynamic change in these
IEs after the association is not really handled on 32-bit platforms.
This patch fixes this issue.

Cc: stable@kernel.org
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/util.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index d09f78b..78a6e92 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -579,7 +579,7 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len,
 		if (elen > left)
 			break;
 
-		if (calc_crc && id < 64 && (filter & BIT(id)))
+		if (calc_crc && id < 64 && (filter & (1ULL << id)))
 			crc = crc32_be(crc, pos - 2, elen + 2);
 
 		switch (id) {
-- 
cgit v1.1


From 815833e7ecf0b9a017315cae6aef4d7cd9517681 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Sat, 5 Dec 2009 18:08:05 +0100
Subject: ath9k: fix tx status reporting

This patch fixes a bug in ath9k's tx status check, which
caused mac80211 to consider regularly transmitted unicast frames
as un-acked.
When checking the ts_status field for errors, it needs to be masked
with ATH9K_TXERR_FILT, because this field also contains other fields
like ATH9K_TX_ACKED.
Without this patch, AP mode is pretty much unusable, as hostapd
checks the ACK status for the frames that it injects.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/xmit.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 564c6cb..2a11cc5 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -2078,7 +2078,7 @@ static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq)
 				&txq->axq_q, lastbf->list.prev);
 
 		txq->axq_depth--;
-		txok = (ds->ds_txstat.ts_status == 0);
+		txok = !(ds->ds_txstat.ts_status & ATH9K_TXERR_FILT);
 		txq->axq_tx_inprogress = false;
 		spin_unlock_bh(&txq->axq_lock);
 
-- 
cgit v1.1


From 70d57139f932b9ca21026253d02af71cf53d764a Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Sat, 5 Dec 2009 19:25:22 -0600
Subject: rtl8187: Fix wrong rfkill switch mask for some models
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

There are different bits used to convey the setting of the rfkill
switch to the driver. The current driver only supports one of these
possibilities. These changes were derived from the latest version
of the vendor driver.

This patch fixes the regression noted in kernel Bugzilla #14743.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-and-tested-by: Antti Kaijanmäki <antti@kaijanmaki.net>
Tested-by: Hin-Tak Leung <hintak.leung@gmail.com>
Cc: Stable <stable@kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8187.h        |  5 +++++
 drivers/net/wireless/rtl818x/rtl8187_dev.c    | 12 ++++++++++--
 drivers/net/wireless/rtl818x/rtl8187_rfkill.c |  4 ++--
 3 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/rtl818x/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187.h
index abb4907..b1a24de 100644
--- a/drivers/net/wireless/rtl818x/rtl8187.h
+++ b/drivers/net/wireless/rtl818x/rtl8187.h
@@ -23,6 +23,7 @@
 #define RTL8187_EEPROM_TXPWR_CHAN_1	0x16	/* 3 channels */
 #define RTL8187_EEPROM_TXPWR_CHAN_6	0x1B	/* 2 channels */
 #define RTL8187_EEPROM_TXPWR_CHAN_4	0x3D	/* 2 channels */
+#define RTL8187_EEPROM_SELECT_GPIO	0x3B
 
 #define RTL8187_REQT_READ	0xC0
 #define RTL8187_REQT_WRITE	0x40
@@ -31,6 +32,9 @@
 
 #define RTL8187_MAX_RX		0x9C4
 
+#define RFKILL_MASK_8187_89_97	0x2
+#define RFKILL_MASK_8198	0x4
+
 struct rtl8187_rx_info {
 	struct urb *urb;
 	struct ieee80211_hw *dev;
@@ -122,6 +126,7 @@ struct rtl8187_priv {
 	u8 noise;
 	u8 slot_time;
 	u8 aifsn[4];
+	u8 rfkill_mask;
 	struct {
 		__le64 buf;
 		struct sk_buff_head queue;
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index 76973b8..bc5726d 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -1322,6 +1322,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 	struct ieee80211_channel *channel;
 	const char *chip_name;
 	u16 txpwr, reg;
+	u16 product_id = le16_to_cpu(udev->descriptor.idProduct);
 	int err, i;
 
 	dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8187_ops);
@@ -1481,6 +1482,13 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 		(*channel++).hw_value = txpwr & 0xFF;
 		(*channel++).hw_value = txpwr >> 8;
 	}
+	/* Handle the differing rfkill GPIO bit in different models */
+	priv->rfkill_mask = RFKILL_MASK_8187_89_97;
+	if (product_id == 0x8197 || product_id == 0x8198) {
+		eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_SELECT_GPIO, &reg);
+		if (reg & 0xFF00)
+			priv->rfkill_mask = RFKILL_MASK_8198;
+	}
 
 	/*
 	 * XXX: Once this driver supports anything that requires
@@ -1509,9 +1517,9 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 	mutex_init(&priv->conf_mutex);
 	skb_queue_head_init(&priv->b_tx_status.queue);
 
-	printk(KERN_INFO "%s: hwaddr %pM, %s V%d + %s\n",
+	printk(KERN_INFO "%s: hwaddr %pM, %s V%d + %s, rfkill mask %d\n",
 	       wiphy_name(dev->wiphy), dev->wiphy->perm_addr,
-	       chip_name, priv->asic_rev, priv->rf->name);
+	       chip_name, priv->asic_rev, priv->rf->name, priv->rfkill_mask);
 
 #ifdef CONFIG_RTL8187_LEDS
 	eeprom_93cx6_read(&eeprom, 0x3F, &reg);
diff --git a/drivers/net/wireless/rtl818x/rtl8187_rfkill.c b/drivers/net/wireless/rtl818x/rtl8187_rfkill.c
index cad8037..03555e1 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_rfkill.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_rfkill.c
@@ -25,10 +25,10 @@ static bool rtl8187_is_radio_enabled(struct rtl8187_priv *priv)
 	u8 gpio;
 
 	gpio = rtl818x_ioread8(priv, &priv->map->GPIO0);
-	rtl818x_iowrite8(priv, &priv->map->GPIO0, gpio & ~0x02);
+	rtl818x_iowrite8(priv, &priv->map->GPIO0, gpio & ~priv->rfkill_mask);
 	gpio = rtl818x_ioread8(priv, &priv->map->GPIO1);
 
-	return gpio & 0x02;
+	return gpio & priv->rfkill_mask;
 }
 
 void rtl8187_rfkill_init(struct ieee80211_hw *hw)
-- 
cgit v1.1


From a589296a3592c8879cef8fd13518fed18c5fa5a3 Mon Sep 17 00:00:00 2001
From: David Kilroy <kilroyd@googlemail.com>
Date: Sun, 6 Dec 2009 19:28:47 +0000
Subject: orinoco: remove spare KERN_DEBUG

A KERN_DEBUG didn't get removed when transitioning from printk to
pr_debug

Signed-off-by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/orinoco/hermes_dld.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/orinoco/hermes_dld.c b/drivers/net/wireless/orinoco/hermes_dld.c
index a3eefe1..6d5660d 100644
--- a/drivers/net/wireless/orinoco/hermes_dld.c
+++ b/drivers/net/wireless/orinoco/hermes_dld.c
@@ -427,7 +427,7 @@ int hermesi_program_init(hermes_t *hw, u32 offset)
 	if (err)
 		return err;
 
-	pr_debug(KERN_DEBUG PFX "Enabling volatile, EP 0x%08x\n", offset);
+	pr_debug(PFX "Enabling volatile, EP 0x%08x\n", offset);
 	err = hermes_doicmd_wait(hw,
 				 HERMES_PROGRAM_ENABLE_VOLATILE,
 				 offset & 0xFFFFu,
-- 
cgit v1.1


From 6a213afd058436dbbd01098d7422c6a0073c39b5 Mon Sep 17 00:00:00 2001
From: Shahar Or <mightyiampresence@gmail.com>
Date: Mon, 7 Dec 2009 12:05:54 +0200
Subject: ath5k: add support for Dell Vostro A860 LED

Adds support for the WiFi activity LED on the Dell Vostro A860 laptop.

Signed-off-by: Shahar Or <shahar@shahar-or.co.il>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath5k/led.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c
index d495890..60f5475 100644
--- a/drivers/net/wireless/ath/ath5k/led.c
+++ b/drivers/net/wireless/ath/ath5k/led.c
@@ -79,6 +79,8 @@ static const struct pci_device_id ath5k_led_devices[] = {
 	{ ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137b), ATH_LED(3, 1) },
 	/* IBM-specific AR5212 (all others) */
 	{ PCI_VDEVICE(ATHEROS, PCI_DEVICE_ID_ATHEROS_AR5212_IBM), ATH_LED(0, 0) },
+	/* Dell Vostro A860 (shahar@shahar-or.co.il) */
+	{ ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0112), ATH_LED(3, 0) },
 	{ }
 };
 
-- 
cgit v1.1