From 8ab5415d6c701a59dd6fc2bc93cf476ecc03ada5 Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni@qca.qualcomm.com>
Date: Wed, 9 May 2012 22:14:51 +0300
Subject: ath6kl: Use correct max-scan-SSIDs limit

The currently used firmware images support 16 SSIDs in the scan
request (indexes 0..15), so update the host driver to use the same
limit to allow some more SSIDs to be scanned per request. In addition,
change the max-index to max-SSIDs to make it easier to understand the
implementation and fix couple of off-by-one checks that could limit
the maximum number of entries too strictly.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c | 8 ++++----
 drivers/net/wireless/ath/ath6kl/wmi.c      | 2 +-
 drivers/net/wireless/ath/ath6kl/wmi.h      | 4 ++--
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index b869a35..a6bebc2 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -888,7 +888,7 @@ static int ath6kl_set_probed_ssids(struct ath6kl *ar,
 {
 	u8 i;
 
-	if (n_ssids > MAX_PROBED_SSID_INDEX)
+	if (n_ssids > MAX_PROBED_SSIDS)
 		return -EINVAL;
 
 	for (i = 0; i < n_ssids; i++) {
@@ -900,7 +900,7 @@ static int ath6kl_set_probed_ssids(struct ath6kl *ar,
 	}
 
 	/* Make sure no old entries are left behind */
-	for (i = n_ssids; i < MAX_PROBED_SSID_INDEX; i++) {
+	for (i = n_ssids; i < MAX_PROBED_SSIDS; i++) {
 		ath6kl_wmi_probedssid_cmd(ar->wmi, vif->fw_vif_idx, i,
 					  DISABLE_SSID_FLAG, 0, NULL);
 	}
@@ -3470,7 +3470,7 @@ int ath6kl_cfg80211_init(struct ath6kl *ar)
 	}
 
 	/* max num of ssids that can be probed during scanning */
-	wiphy->max_scan_ssids = MAX_PROBED_SSID_INDEX;
+	wiphy->max_scan_ssids = MAX_PROBED_SSIDS;
 	wiphy->max_scan_ie_len = 1000; /* FIX: what is correct limit? */
 	switch (ar->hw.cap) {
 	case WMI_11AN_CAP:
@@ -3527,7 +3527,7 @@ int ath6kl_cfg80211_init(struct ath6kl *ar)
 	wiphy->wowlan.pattern_min_len = 1;
 	wiphy->wowlan.pattern_max_len = WOW_PATTERN_SIZE;
 
-	wiphy->max_sched_scan_ssids = MAX_PROBED_SSID_INDEX;
+	wiphy->max_sched_scan_ssids = MAX_PROBED_SSIDS;
 
 	ar->wiphy->flags |= WIPHY_FLAG_SUPPORTS_FW_ROAM |
 			    WIPHY_FLAG_HAVE_AP_SME |
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c
index ee8ec23..bdd3b2c 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.c
+++ b/drivers/net/wireless/ath/ath6kl/wmi.c
@@ -1995,7 +1995,7 @@ int ath6kl_wmi_probedssid_cmd(struct wmi *wmi, u8 if_idx, u8 index, u8 flag,
 	struct wmi_probed_ssid_cmd *cmd;
 	int ret;
 
-	if (index > MAX_PROBED_SSID_INDEX)
+	if (index >= MAX_PROBED_SSIDS)
 		return -EINVAL;
 
 	if (ssid_len > sizeof(cmd->ssid))
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.h b/drivers/net/wireless/ath/ath6kl/wmi.h
index 9076bec..3518550 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.h
+++ b/drivers/net/wireless/ath/ath6kl/wmi.h
@@ -978,7 +978,7 @@ struct wmi_bss_filter_cmd {
 } __packed;
 
 /* WMI_SET_PROBED_SSID_CMDID */
-#define MAX_PROBED_SSID_INDEX   9
+#define MAX_PROBED_SSIDS   16
 
 enum wmi_ssid_flag {
 	/* disables entry */
@@ -992,7 +992,7 @@ enum wmi_ssid_flag {
 };
 
 struct wmi_probed_ssid_cmd {
-	/* 0 to MAX_PROBED_SSID_INDEX */
+	/* 0 to MAX_PROBED_SSIDS - 1 */
 	u8 entry_index;
 
 	/* see, enum wmi_ssid_flg */
-- 
cgit v1.1


From 6821d4f08dcdc7d8c21a3280f57f53a080f19840 Mon Sep 17 00:00:00 2001
From: Naveen Gangadharan <ngangadh@qca.qualcomm.com>
Date: Fri, 11 May 2012 14:19:09 -0700
Subject: ath6kl: Add wow multicast firmware capability support

Infrastructure to enable Multicast WOW support based on
firmware capability added to the driver.This enables
different customers or chips to control this feature based
on firmware capability.

kvalo: Firmware capability infrastructure for multicast wow feature,
indetation fixes.

Signed-off-by: Naveen Gangadharan <ngangadh@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c | 8 ++++++--
 drivers/net/wireless/ath/ath6kl/core.h     | 7 +++++++
 drivers/net/wireless/ath/ath6kl/main.c     | 5 ++++-
 3 files changed, 17 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index a6bebc2..22843a1 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -2074,7 +2074,9 @@ static int ath6kl_wow_suspend(struct ath6kl *ar, struct cfg80211_wowlan *wow)
 	if (wow && (wow->n_patterns > WOW_MAX_FILTERS_PER_LIST))
 		return -EINVAL;
 
-	if (!test_bit(NETDEV_MCAST_ALL_ON, &vif->flags)) {
+	if (!test_bit(NETDEV_MCAST_ALL_ON, &vif->flags) &&
+	    test_bit(ATH6KL_FW_CAPABILITY_WOW_MULTICAST_FILTER,
+		     ar->fw_capabilities)) {
 		ret = ath6kl_wmi_mcast_filter_cmd(vif->ar->wmi,
 						vif->fw_vif_idx, false);
 		if (ret)
@@ -2209,7 +2211,9 @@ static int ath6kl_wow_resume(struct ath6kl *ar)
 
 	ar->state = ATH6KL_STATE_ON;
 
-	if (!test_bit(NETDEV_MCAST_ALL_OFF, &vif->flags)) {
+	if (!test_bit(NETDEV_MCAST_ALL_OFF, &vif->flags) &&
+	    test_bit(ATH6KL_FW_CAPABILITY_WOW_MULTICAST_FILTER,
+		     ar->fw_capabilities)) {
 		ret = ath6kl_wmi_mcast_filter_cmd(vif->ar->wmi,
 					vif->fw_vif_idx, true);
 		if (ret)
diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h
index 4d9c6f1..79c7055 100644
--- a/drivers/net/wireless/ath/ath6kl/core.h
+++ b/drivers/net/wireless/ath/ath6kl/core.h
@@ -100,6 +100,13 @@ enum ath6kl_fw_capability {
 	/* Firmware has support to override rsn cap of rsn ie */
 	ATH6KL_FW_CAPABILITY_RSN_CAP_OVERRIDE,
 
+	/*
+	 * Multicast support in WOW and host awake mode.
+	 * Allow all multicast in host awake mode.
+	 * Apply multicast filter in WOW mode.
+	 */
+	ATH6KL_FW_CAPABILITY_WOW_MULTICAST_FILTER,
+
 	/* this needs to be last */
 	ATH6KL_FW_CAPABILITY_MAX,
 };
diff --git a/drivers/net/wireless/ath/ath6kl/main.c b/drivers/net/wireless/ath/ath6kl/main.c
index e552447..3e6768a 100644
--- a/drivers/net/wireless/ath/ath6kl/main.c
+++ b/drivers/net/wireless/ath/ath6kl/main.c
@@ -1167,7 +1167,10 @@ static void ath6kl_set_multicast_list(struct net_device *ndev)
 	else
 		clear_bit(NETDEV_MCAST_ALL_ON, &vif->flags);
 
-	mc_all_on = mc_all_on || (vif->ar->state == ATH6KL_STATE_ON);
+	if (test_bit(ATH6KL_FW_CAPABILITY_WOW_MULTICAST_FILTER,
+		     vif->ar->fw_capabilities)) {
+		mc_all_on = mc_all_on || (vif->ar->state == ATH6KL_STATE_ON);
+	}
 
 	if (!(ndev->flags & IFF_MULTICAST)) {
 		mc_all_on = false;
-- 
cgit v1.1


From c422d52d0450988ce9a1ffdddb78807538396749 Mon Sep 17 00:00:00 2001
From: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
Date: Tue, 15 May 2012 00:09:23 -0700
Subject: ath6kl: enable enhanced bmiss detection

Enable enhanced bmiss detection if the firmware supports it. This
feature is only enabled on some firmwares since it comes with a power
cost.

Also add a few missing command ids to keep the enums straight.

kvalo: fix a compiler with ath6kl_err(), add few empty lines

Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c | 30 ++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath6kl/cfg80211.h |  2 ++
 drivers/net/wireless/ath/ath6kl/core.h     |  3 +++
 drivers/net/wireless/ath/ath6kl/init.c     |  3 +++
 drivers/net/wireless/ath/ath6kl/wmi.c      | 19 +++++++++++++++++++
 drivers/net/wireless/ath/ath6kl/wmi.h      | 11 +++++++++++
 6 files changed, 68 insertions(+)

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index 22843a1..e68b107 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -576,6 +576,9 @@ static int ath6kl_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev,
 
 	vif->nw_type = vif->next_mode;
 
+	/* enable enhanced bmiss detection if applicable */
+	ath6kl_cfg80211_sta_bmiss_enhance(vif, true);
+
 	if (vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT)
 		nw_subtype = SUBTYPE_P2PCLIENT;
 
@@ -1512,6 +1515,9 @@ static int ath6kl_cfg80211_change_iface(struct wiphy *wiphy,
 		}
 	}
 
+	/* need to clean up enhanced bmiss detection fw state */
+	ath6kl_cfg80211_sta_bmiss_enhance(vif, false);
+
 set_iface_type:
 	switch (type) {
 	case NL80211_IFTYPE_STATION:
@@ -2618,6 +2624,30 @@ static int ath6kl_set_channel(struct wiphy *wiphy, struct net_device *dev,
 	return 0;
 }
 
+void ath6kl_cfg80211_sta_bmiss_enhance(struct ath6kl_vif *vif, bool enable)
+{
+	int err;
+
+	if (WARN_ON(!test_bit(WMI_READY, &vif->ar->flag)))
+		return;
+
+	if (vif->nw_type != INFRA_NETWORK)
+		return;
+
+	if (!test_bit(ATH6KL_FW_CAPABILITY_BMISS_ENHANCE,
+		      vif->ar->fw_capabilities))
+		return;
+
+	ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s fw bmiss enhance\n",
+		   enable ? "enable" : "disable");
+
+	err = ath6kl_wmi_sta_bmiss_enhance_cmd(vif->ar->wmi,
+					       vif->fw_vif_idx, enable);
+	if (err)
+		ath6kl_err("failed to %s enhanced bmiss detection: %d\n",
+			   enable ? "enable" : "disable", err);
+}
+
 static int ath6kl_get_rsn_capab(struct cfg80211_beacon_data *beacon,
 				u8 *rsn_capab)
 {
diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.h b/drivers/net/wireless/ath/ath6kl/cfg80211.h
index 5ea8cbb..b992046 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.h
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.h
@@ -62,5 +62,7 @@ void ath6kl_cfg80211_cleanup(struct ath6kl *ar);
 
 struct ath6kl *ath6kl_cfg80211_create(void);
 void ath6kl_cfg80211_destroy(struct ath6kl *ar);
+/* TODO: remove this once ath6kl_vif_cleanup() is moved to cfg80211.c */
+void ath6kl_cfg80211_sta_bmiss_enhance(struct ath6kl_vif *vif, bool enable);
 
 #endif /* ATH6KL_CFG80211_H */
diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h
index 79c7055..9916979 100644
--- a/drivers/net/wireless/ath/ath6kl/core.h
+++ b/drivers/net/wireless/ath/ath6kl/core.h
@@ -107,6 +107,9 @@ enum ath6kl_fw_capability {
 	 */
 	ATH6KL_FW_CAPABILITY_WOW_MULTICAST_FILTER,
 
+	/* Firmware supports enhanced bmiss detection */
+	ATH6KL_FW_CAPABILITY_BMISS_ENHANCE,
+
 	/* this needs to be last */
 	ATH6KL_FW_CAPABILITY_MAX,
 };
diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c
index 7eb0515..10de132 100644
--- a/drivers/net/wireless/ath/ath6kl/init.c
+++ b/drivers/net/wireless/ath/ath6kl/init.c
@@ -1659,6 +1659,9 @@ void ath6kl_cleanup_vif(struct ath6kl_vif *vif, bool wmi_ready)
 		cfg80211_scan_done(vif->scan_req, true);
 		vif->scan_req = NULL;
 	}
+
+	/* need to clean up enhanced bmiss detection fw state */
+	ath6kl_cfg80211_sta_bmiss_enhance(vif, false);
 }
 
 void ath6kl_stop_txrx(struct ath6kl *ar)
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c
index bdd3b2c..6ad762d 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.c
+++ b/drivers/net/wireless/ath/ath6kl/wmi.c
@@ -2997,6 +2997,25 @@ int ath6kl_wmi_add_del_mcast_filter_cmd(struct wmi *wmi, u8 if_idx,
 	return ret;
 }
 
+int ath6kl_wmi_sta_bmiss_enhance_cmd(struct wmi *wmi, u8 if_idx, bool enhance)
+{
+	struct sk_buff *skb;
+	struct wmi_sta_bmiss_enhance_cmd *cmd;
+	int ret;
+
+	skb = ath6kl_wmi_get_new_buf(sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_sta_bmiss_enhance_cmd *) skb->data;
+	cmd->enable = enhance ? 1 : 0;
+
+	ret = ath6kl_wmi_cmd_send(wmi, if_idx, skb,
+				  WMI_STA_BMISS_ENHANCE_CMDID,
+				  NO_SYNC_WMIFLAG);
+	return ret;
+}
+
 s32 ath6kl_wmi_get_rate(s8 rate_index)
 {
 	if (rate_index == RATE_AUTO)
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.h b/drivers/net/wireless/ath/ath6kl/wmi.h
index 3518550..8c07e38 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.h
+++ b/drivers/net/wireless/ath/ath6kl/wmi.h
@@ -624,6 +624,10 @@ enum wmi_cmd_id {
 	WMI_SEND_MGMT_CMDID,
 	WMI_BEGIN_SCAN_CMDID,
 
+	WMI_SET_BLACK_LIST,
+	WMI_SET_MCASTRATE,
+
+	WMI_STA_BMISS_ENHANCE_CMDID,
 };
 
 enum wmi_mgmt_frame_type {
@@ -1017,6 +1021,11 @@ struct wmi_bmiss_time_cmd {
 	__le16 num_beacons;
 };
 
+/* WMI_STA_ENHANCE_BMISS_CMDID */
+struct wmi_sta_bmiss_enhance_cmd {
+	u8 enable;
+} __packed;
+
 /* WMI_SET_POWER_MODE_CMDID */
 enum wmi_power_mode {
 	REC_POWER = 0x01,
@@ -2547,6 +2556,8 @@ int ath6kl_wmi_set_roam_mode_cmd(struct wmi *wmi, enum wmi_roam_mode mode);
 int ath6kl_wmi_mcast_filter_cmd(struct wmi *wmi, u8 if_idx, bool mc_all_on);
 int ath6kl_wmi_add_del_mcast_filter_cmd(struct wmi *wmi, u8 if_idx,
 					u8 *filter, bool add_filter);
+int ath6kl_wmi_sta_bmiss_enhance_cmd(struct wmi *wmi, u8 if_idx, bool enable);
+
 /* AP mode uAPSD */
 int ath6kl_wmi_ap_set_apsd(struct wmi *wmi, u8 if_idx, u8 enable);
 
-- 
cgit v1.1


From dd45b7598f1c52933f276ba7ce175fa1305b8ba0 Mon Sep 17 00:00:00 2001
From: Naveen Singh <navesing@qca.qualcomm.com>
Date: Wed, 16 May 2012 13:29:00 +0300
Subject: ath6kl: Include match ssid list in scheduled scan

Scheduled scan implementation was only taking probed list into
consideration. The matched list was dropped. This would cause
FW not to report the AP as the list never had that AP's SSID
populated. This was causing long connection time when supplicant
would just issue a wild card SSID in probed list. As a part of
this implementation, ath6kl driver would create a complete list
by taking both probed and matched list and pass it to FW. FW would
probe for the SSID that it needs to and would match against the
relevant SSIDS that is been configured.

kvalo: whitespace changes, less indentation in the for loop, use ++

Signed-off-by: Naveen Singh <navesing@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c | 98 +++++++++++++++++++++++++++---
 drivers/net/wireless/ath/ath6kl/core.h     |  5 ++
 drivers/net/wireless/ath/ath6kl/wmi.h      |  6 ++
 3 files changed, 99 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index e68b107..f3a6cfc 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -53,6 +53,11 @@
 
 #define DEFAULT_BG_SCAN_PERIOD 60
 
+struct ath6kl_cfg80211_match_probe_ssid {
+	struct cfg80211_ssid ssid;
+	u8 flag;
+};
+
 static struct ieee80211_rate ath6kl_rates[] = {
 	RATETAB_ENT(10, 0x1, 0),
 	RATETAB_ENT(20, 0x2, 0),
@@ -887,23 +892,76 @@ void ath6kl_cfg80211_disconnect_event(struct ath6kl_vif *vif, u8 reason,
 
 static int ath6kl_set_probed_ssids(struct ath6kl *ar,
 				   struct ath6kl_vif *vif,
-				   struct cfg80211_ssid *ssids, int n_ssids)
+				   struct cfg80211_ssid *ssids, int n_ssids,
+				   struct cfg80211_match_set *match_set,
+				   int n_match_ssid)
 {
-	u8 i;
+	u8 i, j, index_to_add, ssid_found = false;
+	struct ath6kl_cfg80211_match_probe_ssid ssid_list[MAX_PROBED_SSIDS];
+
+	memset(ssid_list, 0, sizeof(ssid_list));
 
-	if (n_ssids > MAX_PROBED_SSIDS)
+	if (n_ssids > MAX_PROBED_SSIDS ||
+	    n_match_ssid > MAX_PROBED_SSIDS)
 		return -EINVAL;
 
 	for (i = 0; i < n_ssids; i++) {
+		memcpy(ssid_list[i].ssid.ssid,
+		       ssids[i].ssid,
+		       ssids[i].ssid_len);
+		ssid_list[i].ssid.ssid_len = ssids[i].ssid_len;
+
+		if (ssids[i].ssid_len)
+			ssid_list[i].flag = SPECIFIC_SSID_FLAG;
+		else
+			ssid_list[i].flag = ANY_SSID_FLAG;
+
+		if (n_match_ssid == 0)
+			ssid_list[i].flag |= MATCH_SSID_FLAG;
+	}
+
+	index_to_add = i;
+
+	for (i = 0; i < n_match_ssid; i++) {
+		ssid_found = false;
+
+		for (j = 0; j < n_ssids; j++) {
+			if ((match_set[i].ssid.ssid_len ==
+			     ssid_list[j].ssid.ssid_len) &&
+			    (!memcmp(ssid_list[j].ssid.ssid,
+				     match_set[i].ssid.ssid,
+				     match_set[i].ssid.ssid_len))) {
+				ssid_list[j].flag |= MATCH_SSID_FLAG;
+				ssid_found = true;
+				break;
+			}
+		}
+
+		if (ssid_found)
+			continue;
+
+		if (index_to_add >= MAX_PROBED_SSIDS)
+			continue;
+
+		ssid_list[index_to_add].ssid.ssid_len =
+			match_set[i].ssid.ssid_len;
+		memcpy(ssid_list[index_to_add].ssid.ssid,
+		       match_set[i].ssid.ssid,
+		       match_set[i].ssid.ssid_len);
+		ssid_list[index_to_add].flag |= MATCH_SSID_FLAG;
+		index_to_add++;
+	}
+
+	for (i = 0; i < index_to_add; i++) {
 		ath6kl_wmi_probedssid_cmd(ar->wmi, vif->fw_vif_idx, i,
-					  ssids[i].ssid_len ?
-					  SPECIFIC_SSID_FLAG : ANY_SSID_FLAG,
-					  ssids[i].ssid_len,
-					  ssids[i].ssid);
+					  ssid_list[i].flag,
+					  ssid_list[i].ssid.ssid_len,
+					  ssid_list[i].ssid.ssid);
+
 	}
 
 	/* Make sure no old entries are left behind */
-	for (i = n_ssids; i < MAX_PROBED_SSIDS; i++) {
+	for (i = index_to_add; i < MAX_PROBED_SSIDS; i++) {
 		ath6kl_wmi_probedssid_cmd(ar->wmi, vif->fw_vif_idx, i,
 					  DISABLE_SSID_FLAG, 0, NULL);
 	}
@@ -937,7 +995,7 @@ static int ath6kl_cfg80211_scan(struct wiphy *wiphy, struct net_device *ndev,
 	}
 
 	ret = ath6kl_set_probed_ssids(ar, vif, request->ssids,
-				      request->n_ssids);
+				      request->n_ssids, NULL, 0);
 	if (ret < 0)
 		return ret;
 
@@ -3194,10 +3252,24 @@ static int ath6kl_cfg80211_sscan_start(struct wiphy *wiphy,
 	ath6kl_cfg80211_scan_complete_event(vif, true);
 
 	ret = ath6kl_set_probed_ssids(ar, vif, request->ssids,
-				      request->n_ssids);
+				      request->n_ssids,
+				      request->match_sets,
+				      request->n_match_sets);
 	if (ret < 0)
 		return ret;
 
+	if (!request->n_match_sets) {
+		ret = ath6kl_wmi_bssfilter_cmd(ar->wmi, vif->fw_vif_idx,
+					       ALL_BSS_FILTER, 0);
+		if (ret < 0)
+			return ret;
+	} else {
+		 ret = ath6kl_wmi_bssfilter_cmd(ar->wmi, vif->fw_vif_idx,
+						MATCHED_SSID_FILTER, 0);
+		if (ret < 0)
+			return ret;
+	}
+
 	/* fw uses seconds, also make sure that it's >0 */
 	interval = max_t(u16, 1, request->interval / 1000);
 
@@ -3505,6 +3577,12 @@ int ath6kl_cfg80211_init(struct ath6kl *ar)
 
 	/* max num of ssids that can be probed during scanning */
 	wiphy->max_scan_ssids = MAX_PROBED_SSIDS;
+
+	/* max num of ssids that can be matched after scan */
+	if (test_bit(ATH6KL_FW_CAPABILITY_SCHED_SCAN_MATCH_LIST,
+		     ar->fw_capabilities))
+		wiphy->max_match_sets = MAX_PROBED_SSIDS;
+
 	wiphy->max_scan_ie_len = 1000; /* FIX: what is correct limit? */
 	switch (ar->hw.cap) {
 	case WMI_11AN_CAP:
diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h
index 9916979..991bd96 100644
--- a/drivers/net/wireless/ath/ath6kl/core.h
+++ b/drivers/net/wireless/ath/ath6kl/core.h
@@ -110,6 +110,11 @@ enum ath6kl_fw_capability {
 	/* Firmware supports enhanced bmiss detection */
 	ATH6KL_FW_CAPABILITY_BMISS_ENHANCE,
 
+	/*
+	 * FW supports matching of ssid in schedule scan
+	 */
+	ATH6KL_FW_CAPABILITY_SCHED_SCAN_MATCH_LIST,
+
 	/* this needs to be last */
 	ATH6KL_FW_CAPABILITY_MAX,
 };
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.h b/drivers/net/wireless/ath/ath6kl/wmi.h
index 8c07e38..4775679 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.h
+++ b/drivers/net/wireless/ath/ath6kl/wmi.h
@@ -964,6 +964,9 @@ enum wmi_bss_filter {
 	/* beacons matching probed ssid */
 	PROBED_SSID_FILTER,
 
+	/* beacons matching matched ssid */
+	MATCHED_SSID_FILTER,
+
 	/* marker only */
 	LAST_BSS_FILTER,
 };
@@ -993,6 +996,9 @@ enum wmi_ssid_flag {
 
 	/* probes for any ssid */
 	ANY_SSID_FLAG = 0x02,
+
+	/* match for ssid */
+	MATCH_SSID_FLAG = 0x08,
 };
 
 struct wmi_probed_ssid_cmd {
-- 
cgit v1.1


From 33a6664a6e4b45814ef6e3129842f3fd7e5d1117 Mon Sep 17 00:00:00 2001
From: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
Date: Wed, 16 May 2012 13:41:13 -0700
Subject: ath6kl: issue wmi disconnect after notifying cfg80211

ath6kl would issue a wmi disconnect command in response to a remote
disconnect and return early without notifying cfg80211, only sending a
cfg80211_disconnected (with reason code always 3) in response to the
second disconnect firmware event.

Pass the right reason code to cfg80211 on the first disconnect instead.

This fixes at least one bug where a p2p client would stop trying to
connect after receiving a stale RSN deauth which was reported to
cfg80211 as GO leaving BSS.

Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c | 27 ++++++++++++---------------
 1 file changed, 12 insertions(+), 15 deletions(-)

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index f3a6cfc..7845d33 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -860,20 +860,6 @@ void ath6kl_cfg80211_disconnect_event(struct ath6kl_vif *vif, u8 reason,
 		}
 	}
 
-	/*
-	 * Send a disconnect command to target when a disconnect event is
-	 * received with reason code other than 3 (DISCONNECT_CMD - disconnect
-	 * request from host) to make the firmware stop trying to connect even
-	 * after giving disconnect event. There will be one more disconnect
-	 * event for this disconnect command with reason code DISCONNECT_CMD
-	 * which will be notified to cfg80211.
-	 */
-
-	if (reason != DISCONNECT_CMD) {
-		ath6kl_wmi_disconnect_cmd(ar->wmi, vif->fw_vif_idx);
-		return;
-	}
-
 	clear_bit(CONNECT_PEND, &vif->flags);
 
 	if (vif->sme_state == SME_CONNECTING) {
@@ -883,11 +869,22 @@ void ath6kl_cfg80211_disconnect_event(struct ath6kl_vif *vif, u8 reason,
 					WLAN_STATUS_UNSPECIFIED_FAILURE,
 					GFP_KERNEL);
 	} else if (vif->sme_state == SME_CONNECTED) {
-		cfg80211_disconnected(vif->ndev, reason,
+		cfg80211_disconnected(vif->ndev, proto_reason,
 				      NULL, 0, GFP_KERNEL);
 	}
 
 	vif->sme_state = SME_DISCONNECTED;
+
+	/*
+	 * Send a disconnect command to target when a disconnect event is
+	 * received with reason code other than 3 (DISCONNECT_CMD - disconnect
+	 * request from host) to make the firmware stop trying to connect even
+	 * after giving disconnect event. There will be one more disconnect
+	 * event for this disconnect command with reason code DISCONNECT_CMD
+	 * which won't be notified to cfg80211.
+	 */
+	if (reason != DISCONNECT_CMD)
+		ath6kl_wmi_disconnect_cmd(ar->wmi, vif->fw_vif_idx);
 }
 
 static int ath6kl_set_probed_ssids(struct ath6kl *ar,
-- 
cgit v1.1


From fa338be062e31141a8dadd822a98f558785c8818 Mon Sep 17 00:00:00 2001
From: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Date: Tue, 22 May 2012 12:52:48 +0530
Subject: ath6kl: Fix missing gpio pin 9 configuration

GPIO pin 9 also needs to be configured along with other gpio
pins to avoid sdio crc errors. I've not experienced any issue
with missing this particular gpio pin configuration, found dunring
code review. This can potentially improve rx performance.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/init.c   | 6 ++++++
 drivers/net/wireless/ath/ath6kl/target.h | 1 +
 2 files changed, 7 insertions(+)

diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c
index 10de132..241febc 100644
--- a/drivers/net/wireless/ath/ath6kl/init.c
+++ b/drivers/net/wireless/ath/ath6kl/init.c
@@ -1392,6 +1392,12 @@ static int ath6kl_init_upload(struct ath6kl *ar)
 	    ar->version.target_ver == AR6003_HW_2_1_1_VERSION) {
 		ath6kl_err("temporary war to avoid sdio crc error\n");
 
+		param = 0x28;
+		address = GPIO_BASE_ADDRESS + GPIO_PIN9_ADDRESS;
+		status = ath6kl_bmi_reg_write(ar, address, param);
+		if (status)
+			return status;
+
 		param = 0x20;
 
 		address = GPIO_BASE_ADDRESS + GPIO_PIN10_ADDRESS;
diff --git a/drivers/net/wireless/ath/ath6kl/target.h b/drivers/net/wireless/ath/ath6kl/target.h
index 78e0ef4..a98c12b 100644
--- a/drivers/net/wireless/ath/ath6kl/target.h
+++ b/drivers/net/wireless/ath/ath6kl/target.h
@@ -45,6 +45,7 @@
 #define LPO_CAL_ENABLE_S		20
 #define LPO_CAL_ENABLE			0x00100000
 
+#define GPIO_PIN9_ADDRESS		0x0000004c
 #define GPIO_PIN10_ADDRESS		0x00000050
 #define GPIO_PIN11_ADDRESS		0x00000054
 #define GPIO_PIN12_ADDRESS		0x00000058
-- 
cgit v1.1


From 06e360ace9434bf37164fd87941b797cc0f3cb7e Mon Sep 17 00:00:00 2001
From: Bala Shanmugam <bkamatch@qca.qualcomm.com>
Date: Tue, 22 May 2012 13:23:12 +0530
Subject: ath6kl: Add support for setting tx rateset.

Tx legacy and mcs rateset can configured using iw for
2.4 and 5 bands.  Add support for the same in driver.

kvalo: add an enum for the hw flags and rename the flag accordingly,
rename ath6kl_cfg80211_set_bitrate_mask() to a shorter version to make
it easier to indent

Signed-off-by: Bala Shanmugam <bkamatch@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c |  24 +++++++
 drivers/net/wireless/ath/ath6kl/core.h     |   6 ++
 drivers/net/wireless/ath/ath6kl/init.c     |   5 ++
 drivers/net/wireless/ath/ath6kl/wmi.c      | 109 +++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath6kl/wmi.h      |  32 +++++++++
 5 files changed, 176 insertions(+)

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index 7845d33..6a934e1 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -3320,6 +3320,18 @@ static int ath6kl_cfg80211_sscan_stop(struct wiphy *wiphy,
 	return 0;
 }
 
+static int ath6kl_cfg80211_set_bitrate(struct wiphy *wiphy,
+				       struct net_device *dev,
+				       const u8 *addr,
+				       const struct cfg80211_bitrate_mask *mask)
+{
+	struct ath6kl *ar = ath6kl_priv(dev);
+	struct ath6kl_vif *vif = netdev_priv(dev);
+
+	return ath6kl_wmi_set_bitrate_mask(ar->wmi, vif->fw_vif_idx,
+					   mask);
+}
+
 static const struct ieee80211_txrx_stypes
 ath6kl_mgmt_stypes[NUM_NL80211_IFTYPES] = {
 	[NL80211_IFTYPE_STATION] = {
@@ -3386,6 +3398,7 @@ static struct cfg80211_ops ath6kl_cfg80211_ops = {
 	.mgmt_frame_register = ath6kl_mgmt_frame_register,
 	.sched_scan_start = ath6kl_cfg80211_sscan_start,
 	.sched_scan_stop = ath6kl_cfg80211_sscan_stop,
+	.set_bitrate_mask = ath6kl_cfg80211_set_bitrate,
 };
 
 void ath6kl_cfg80211_stop(struct ath6kl_vif *vif)
@@ -3616,6 +3629,17 @@ int ath6kl_cfg80211_init(struct ath6kl *ar)
 		ath6kl_band_5ghz.ht_cap.cap = 0;
 		ath6kl_band_5ghz.ht_cap.ht_supported = false;
 	}
+
+	if (ar->hw.flags & ATH6KL_HW_FLAG_64BIT_RATES) {
+		ath6kl_band_2ghz.ht_cap.mcs.rx_mask[0] = 0xff;
+		ath6kl_band_5ghz.ht_cap.mcs.rx_mask[0] = 0xff;
+		ath6kl_band_2ghz.ht_cap.mcs.rx_mask[1] = 0xff;
+		ath6kl_band_5ghz.ht_cap.mcs.rx_mask[1] = 0xff;
+	} else {
+		ath6kl_band_2ghz.ht_cap.mcs.rx_mask[0] = 0xff;
+		ath6kl_band_5ghz.ht_cap.mcs.rx_mask[0] = 0xff;
+	}
+
 	if (band_2gig)
 		wiphy->bands[IEEE80211_BAND_2GHZ] = &ath6kl_band_2ghz;
 	if (band_5gig)
diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h
index 991bd96..b1bc6bc 100644
--- a/drivers/net/wireless/ath/ath6kl/core.h
+++ b/drivers/net/wireless/ath/ath6kl/core.h
@@ -127,6 +127,10 @@ struct ath6kl_fw_ie {
 	u8 data[0];
 };
 
+enum ath6kl_hw_flags {
+	ATH6KL_HW_FLAG_64BIT_RATES	= BIT(0),
+};
+
 #define ATH6KL_FW_API2_FILE "fw-2.bin"
 #define ATH6KL_FW_API3_FILE "fw-3.bin"
 
@@ -702,6 +706,8 @@ struct ath6kl {
 		u32 testscript_addr;
 		enum wmi_phy_cap cap;
 
+		u32 flags;
+
 		struct ath6kl_hw_fw {
 			const char *dir;
 			const char *otp;
diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c
index 241febc..daf24ee 100644
--- a/drivers/net/wireless/ath/ath6kl/init.c
+++ b/drivers/net/wireless/ath/ath6kl/init.c
@@ -42,6 +42,7 @@ static const struct ath6kl_hw hw_list[] = {
 		.reserved_ram_size		= 6912,
 		.refclk_hz			= 26000000,
 		.uarttx_pin			= 8,
+		.flags				= 0,
 
 		/* hw2.0 needs override address hardcoded */
 		.app_start_override_addr	= 0x944C00,
@@ -67,6 +68,7 @@ static const struct ath6kl_hw hw_list[] = {
 		.refclk_hz			= 26000000,
 		.uarttx_pin			= 8,
 		.testscript_addr		= 0x57ef74,
+		.flags				= 0,
 
 		.fw = {
 			.dir		= AR6003_HW_2_1_1_FW_DIR,
@@ -91,6 +93,7 @@ static const struct ath6kl_hw hw_list[] = {
 		.board_addr			= 0x433900,
 		.refclk_hz			= 26000000,
 		.uarttx_pin			= 11,
+		.flags				= ATH6KL_HW_FLAG_64BIT_RATES,
 
 		.fw = {
 			.dir		= AR6004_HW_1_0_FW_DIR,
@@ -110,6 +113,7 @@ static const struct ath6kl_hw hw_list[] = {
 		.board_addr			= 0x43d400,
 		.refclk_hz			= 40000000,
 		.uarttx_pin			= 11,
+		.flags				= ATH6KL_HW_FLAG_64BIT_RATES,
 
 		.fw = {
 			.dir		= AR6004_HW_1_1_FW_DIR,
@@ -129,6 +133,7 @@ static const struct ath6kl_hw hw_list[] = {
 		.board_addr			= 0x435c00,
 		.refclk_hz			= 40000000,
 		.uarttx_pin			= 11,
+		.flags				= ATH6KL_HW_FLAG_64BIT_RATES,
 
 		.fw = {
 			.dir		= AR6004_HW_1_2_FW_DIR,
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c
index 6ad762d..63dc4fd 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.c
+++ b/drivers/net/wireless/ath/ath6kl/wmi.c
@@ -2599,6 +2599,115 @@ static void ath6kl_wmi_relinquish_implicit_pstream_credits(struct wmi *wmi)
 	spin_unlock_bh(&wmi->lock);
 }
 
+static int ath6kl_set_bitrate_mask64(struct wmi *wmi, u8 if_idx,
+				     const struct cfg80211_bitrate_mask *mask)
+{
+	struct sk_buff *skb;
+	int ret, mode, band;
+	u64 mcsrate, ratemask[IEEE80211_NUM_BANDS];
+	struct wmi_set_tx_select_rates64_cmd *cmd;
+
+	memset(&ratemask, 0, sizeof(ratemask));
+	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+		/* copy legacy rate mask */
+		ratemask[band] = mask->control[band].legacy;
+		if (band == IEEE80211_BAND_5GHZ)
+			ratemask[band] =
+				mask->control[band].legacy << 4;
+
+		/* copy mcs rate mask */
+		mcsrate = mask->control[band].mcs[1];
+		mcsrate <<= 8;
+		mcsrate |= mask->control[band].mcs[0];
+		ratemask[band] |= mcsrate << 12;
+		ratemask[band] |= mcsrate << 28;
+	}
+
+	ath6kl_dbg(ATH6KL_DBG_WMI,
+		   "Ratemask 64 bit: 2.4:%llx 5:%llx\n",
+		   ratemask[0], ratemask[1]);
+
+	skb = ath6kl_wmi_get_new_buf(sizeof(*cmd) * WMI_RATES_MODE_MAX);
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_set_tx_select_rates64_cmd *) skb->data;
+	for (mode = 0; mode < WMI_RATES_MODE_MAX; mode++) {
+		/* A mode operate in 5GHZ band */
+		if (mode == WMI_RATES_MODE_11A ||
+		    mode == WMI_RATES_MODE_11A_HT20 ||
+		    mode == WMI_RATES_MODE_11A_HT40)
+			band = IEEE80211_BAND_5GHZ;
+		else
+			band = IEEE80211_BAND_2GHZ;
+		cmd->ratemask[mode] = cpu_to_le64(ratemask[band]);
+	}
+
+	ret = ath6kl_wmi_cmd_send(wmi, if_idx, skb,
+				  WMI_SET_TX_SELECT_RATES_CMDID,
+				  NO_SYNC_WMIFLAG);
+	return ret;
+}
+
+static int ath6kl_set_bitrate_mask32(struct wmi *wmi, u8 if_idx,
+				     const struct cfg80211_bitrate_mask *mask)
+{
+	struct sk_buff *skb;
+	int ret, mode, band;
+	u32 mcsrate, ratemask[IEEE80211_NUM_BANDS];
+	struct wmi_set_tx_select_rates32_cmd *cmd;
+
+	memset(&ratemask, 0, sizeof(ratemask));
+	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+		/* copy legacy rate mask */
+		ratemask[band] = mask->control[band].legacy;
+		if (band == IEEE80211_BAND_5GHZ)
+			ratemask[band] =
+				mask->control[band].legacy << 4;
+
+		/* copy mcs rate mask */
+		mcsrate = mask->control[band].mcs[0];
+		ratemask[band] |= mcsrate << 12;
+		ratemask[band] |= mcsrate << 20;
+	}
+
+	ath6kl_dbg(ATH6KL_DBG_WMI,
+		   "Ratemask 32 bit: 2.4:%x 5:%x\n",
+		   ratemask[0], ratemask[1]);
+
+	skb = ath6kl_wmi_get_new_buf(sizeof(*cmd) * WMI_RATES_MODE_MAX);
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_set_tx_select_rates32_cmd *) skb->data;
+	for (mode = 0; mode < WMI_RATES_MODE_MAX; mode++) {
+		/* A mode operate in 5GHZ band */
+		if (mode == WMI_RATES_MODE_11A ||
+		    mode == WMI_RATES_MODE_11A_HT20 ||
+		    mode == WMI_RATES_MODE_11A_HT40)
+			band = IEEE80211_BAND_5GHZ;
+		else
+			band = IEEE80211_BAND_2GHZ;
+		cmd->ratemask[mode] = cpu_to_le32(ratemask[band]);
+	}
+
+	ret = ath6kl_wmi_cmd_send(wmi, if_idx, skb,
+				  WMI_SET_TX_SELECT_RATES_CMDID,
+				  NO_SYNC_WMIFLAG);
+	return ret;
+}
+
+int ath6kl_wmi_set_bitrate_mask(struct wmi *wmi, u8 if_idx,
+				const struct cfg80211_bitrate_mask *mask)
+{
+	struct ath6kl *ar = wmi->parent_dev;
+
+	if (ar->hw.flags & ATH6KL_HW_FLAG_64BIT_RATES)
+		return ath6kl_set_bitrate_mask64(wmi, if_idx, mask);
+	else
+		return ath6kl_set_bitrate_mask32(wmi, if_idx, mask);
+}
+
 int ath6kl_wmi_set_host_sleep_mode_cmd(struct wmi *wmi, u8 if_idx,
 				       enum ath6kl_host_mode host_mode)
 {
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.h b/drivers/net/wireless/ath/ath6kl/wmi.h
index 4775679..7c94fe3 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.h
+++ b/drivers/net/wireless/ath/ath6kl/wmi.h
@@ -1063,6 +1063,36 @@ struct wmi_power_params_cmd {
 	__le16 ps_fail_event_policy;
 } __packed;
 
+/*
+ * Ratemask for below modes should be passed
+ * to WMI_SET_TX_SELECT_RATES_CMDID.
+ * AR6003 has 32 bit mask for each modes.
+ * First 12 bits for legacy rates, 13 to 20
+ * bits for HT 20 rates and 21 to 28 bits for
+ * HT 40 rates
+ */
+enum wmi_mode_phy {
+	WMI_RATES_MODE_11A = 0,
+	WMI_RATES_MODE_11G,
+	WMI_RATES_MODE_11B,
+	WMI_RATES_MODE_11GONLY,
+	WMI_RATES_MODE_11A_HT20,
+	WMI_RATES_MODE_11G_HT20,
+	WMI_RATES_MODE_11A_HT40,
+	WMI_RATES_MODE_11G_HT40,
+	WMI_RATES_MODE_MAX
+};
+
+/* WMI_SET_TX_SELECT_RATES_CMDID */
+struct wmi_set_tx_select_rates32_cmd {
+	__le32 ratemask[WMI_RATES_MODE_MAX];
+} __packed;
+
+/* WMI_SET_TX_SELECT_RATES_CMDID */
+struct wmi_set_tx_select_rates64_cmd {
+	__le64 ratemask[WMI_RATES_MODE_MAX];
+} __packed;
+
 /* WMI_SET_DISC_TIMEOUT_CMDID */
 struct wmi_disc_timeout_cmd {
 	/* seconds */
@@ -2547,6 +2577,8 @@ int ath6kl_wmi_set_ip_cmd(struct wmi *wmi, u8 if_idx,
 			  __be32 ips0, __be32 ips1);
 int ath6kl_wmi_set_host_sleep_mode_cmd(struct wmi *wmi, u8 if_idx,
 				       enum ath6kl_host_mode host_mode);
+int ath6kl_wmi_set_bitrate_mask(struct wmi *wmi, u8 if_idx,
+				const struct cfg80211_bitrate_mask *mask);
 int ath6kl_wmi_set_wow_mode_cmd(struct wmi *wmi, u8 if_idx,
 				enum ath6kl_wow_mode wow_mode,
 				u32 filter, u16 host_req_delay);
-- 
cgit v1.1


From 824174c3b5a962ff706738e36317451a2343355c Mon Sep 17 00:00:00 2001
From: Raja Mani <rmani@qca.qualcomm.com>
Date: Mon, 28 May 2012 11:51:12 +0530
Subject: ath6kl: Remove unneeded memset in roam related config func

No need to clear requested memory after allocating new SKB
with help of ath6kl_wmi_get_new_buf(). This clear part is
already taken care in ath6kl_wmi_get_new_buf().

Found this on code review.

Signed-off-by: Raja Mani <rmani@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/wmi.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c
index 63dc4fd..43bce9c 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.c
+++ b/drivers/net/wireless/ath/ath6kl/wmi.c
@@ -743,7 +743,6 @@ int ath6kl_wmi_force_roam_cmd(struct wmi *wmi, const u8 *bssid)
 		return -ENOMEM;
 
 	cmd = (struct roam_ctrl_cmd *) skb->data;
-	memset(cmd, 0, sizeof(*cmd));
 
 	memcpy(cmd->info.bssid, bssid, ETH_ALEN);
 	cmd->roam_ctrl = WMI_FORCE_ROAM;
@@ -763,7 +762,6 @@ int ath6kl_wmi_set_roam_mode_cmd(struct wmi *wmi, enum wmi_roam_mode mode)
 		return -ENOMEM;
 
 	cmd = (struct roam_ctrl_cmd *) skb->data;
-	memset(cmd, 0, sizeof(*cmd));
 
 	cmd->info.roam_mode = mode;
 	cmd->roam_ctrl = WMI_SET_ROAM_MODE;
-- 
cgit v1.1


From df6a7072ac3213229c788913f25779e8ab93c9b5 Mon Sep 17 00:00:00 2001
From: Raja Mani <rmani@qca.qualcomm.com>
Date: Mon, 28 May 2012 11:51:13 +0530
Subject: ath6kl: Fix typo in htc mbox debug print msg

Add missing ZERO (x%x to 0x%x) in the format specifier
while printing hex value in htc module.

Signed-off-by: Raja Mani <rmani@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/htc_mbox.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath6kl/htc_mbox.c b/drivers/net/wireless/ath/ath6kl/htc_mbox.c
index 2798624d..cd0e1ba 100644
--- a/drivers/net/wireless/ath/ath6kl/htc_mbox.c
+++ b/drivers/net/wireless/ath/ath6kl/htc_mbox.c
@@ -1309,7 +1309,7 @@ static int ath6kl_htc_rx_packet(struct htc_target *target,
 	}
 
 	ath6kl_dbg(ATH6KL_DBG_HTC,
-		   "htc rx 0x%p hdr x%x len %d mbox 0x%x\n",
+		   "htc rx 0x%p hdr 0x%x len %d mbox 0x%x\n",
 		   packet, packet->info.rx.exp_hdr,
 		   padded_len, dev->ar->mbox_info.htc_addr);
 
-- 
cgit v1.1


From 67b3f1299ab73259aed5871488188a9c59025a54 Mon Sep 17 00:00:00 2001
From: Kiran Reddy <c_lreddy@qca.qualcomm.com>
Date: Tue, 29 May 2012 11:12:50 -0700
Subject: ath6kl: separate ht cap for each band

In virtual interface structure, for each band separate ht cap
is needed. so that one can disable or enable ht capability band
wise.
This will fix the following issue:

1) Disable 11n from supplicant and start a P2P GO.
2) In beacon frames no HT-CAP IE is seen which is expected.
3) Now remove the P2P GO and kill the supplicant.
4) Beacon stops
5) Now using iw  associate to an external AP in 5 GHZ
6) In 5 GHZ no HT IE going in assoc request but
when  associated in 2.4 GHZ can see HT IES over the air
in assoc request.

In the code for del_beacon in cfg80211.c,set_ht_cap is being
called first for 2.4 GHZ and then for 5 GHZ. When  called
for the first time for 2.4 GHZ the enable flag will be set to true
and so when called for the second time for 5 GHZ it just returns
after checking the flag.

Also using this one can have different HT capabilities
per band (for example one may decide not to use 20/40 in 2.4 GHZ
but use it in 5 GHZ). So maintaining a single context is not ok.
it is true for even the enable/disable flag and other HT
capabilities as well

Signed-off-by: Kiran Reddy <c_lreddy@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c | 5 +++--
 drivers/net/wireless/ath/ath6kl/core.h     | 2 +-
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index 6a934e1..6f20998 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -2540,7 +2540,7 @@ void ath6kl_check_wow_status(struct ath6kl *ar)
 static int ath6kl_set_htcap(struct ath6kl_vif *vif, enum ieee80211_band band,
 			    bool ht_enable)
 {
-	struct ath6kl_htcap *htcap = &vif->htcap;
+	struct ath6kl_htcap *htcap = &vif->htcap[band];
 
 	if (htcap->ht_enable == ht_enable)
 		return 0;
@@ -3526,7 +3526,8 @@ struct net_device *ath6kl_interface_add(struct ath6kl *ar, char *name,
 	vif->listen_intvl_t = ATH6KL_DEFAULT_LISTEN_INTVAL;
 	vif->bmiss_time_t = ATH6KL_DEFAULT_BMISS_TIME;
 	vif->bg_scan_period = 0;
-	vif->htcap.ht_enable = true;
+	vif->htcap[IEEE80211_BAND_2GHZ].ht_enable = true;
+	vif->htcap[IEEE80211_BAND_5GHZ].ht_enable = true;
 
 	memcpy(ndev->dev_addr, ar->mac_addr, ETH_ALEN);
 	if (fw_vif_idx != 0)
diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h
index b1bc6bc..17a44fa 100644
--- a/drivers/net/wireless/ath/ath6kl/core.h
+++ b/drivers/net/wireless/ath/ath6kl/core.h
@@ -560,7 +560,7 @@ struct ath6kl_vif {
 	struct ath6kl_wep_key wep_key_list[WMI_MAX_KEY_INDEX + 1];
 	struct ath6kl_key keys[WMI_MAX_KEY_INDEX + 1];
 	struct aggr_info *aggr_cntxt;
-	struct ath6kl_htcap htcap;
+	struct ath6kl_htcap htcap[IEEE80211_NUM_BANDS];
 
 	struct timer_list disconnect_timer;
 	struct timer_list sched_scan_timer;
-- 
cgit v1.1


From e3f5d16120f5118e2f86f1f88deaa69e6843b31f Mon Sep 17 00:00:00 2001
From: Javier Cardona <javier@cozybit.com>
Date: Fri, 8 Jun 2012 13:30:24 -0700
Subject: mac80211: Remove unused variable

Signed-off-by: Javier Cardona <javier@cozybit.com>
Reviewed-by: Jason Abele <jason@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/mesh_hwmp.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index fa7c580..acbd1ad 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -323,7 +323,6 @@ void ieee80211s_update_metric(struct ieee80211_local *local,
 static u32 airtime_link_metric_get(struct ieee80211_local *local,
 				   struct sta_info *sta)
 {
-	struct ieee80211_supported_band *sband;
 	struct rate_info rinfo;
 	/* This should be adjusted for each device */
 	int device_constant = 1 << ARITH_SHIFT;
@@ -333,8 +332,6 @@ static u32 airtime_link_metric_get(struct ieee80211_local *local,
 	u32 tx_time, estimated_retx;
 	u64 result;
 
-	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
-
 	if (sta->fail_avg >= 100)
 		return MAX_METRIC;
 
-- 
cgit v1.1


From 35b3fe1caa26e1ffc5144d3faadecdfa0a8a0f44 Mon Sep 17 00:00:00 2001
From: Javier Cardona <javier@cozybit.com>
Date: Fri, 8 Jun 2012 13:30:25 -0700
Subject: mac80211: Rename stainfo variable for the more common sta

Signed-off-by: Javier Cardona <javier@cozybit.com>
Reviewed-by: Jason Abele <jason@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/mesh.h      | 2 +-
 net/mac80211/mesh_hwmp.c | 8 ++++----
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h
index e364275..c7400a2 100644
--- a/net/mac80211/mesh.h
+++ b/net/mac80211/mesh.h
@@ -245,7 +245,7 @@ void mesh_rmc_free(struct ieee80211_sub_if_data *sdata);
 int mesh_rmc_init(struct ieee80211_sub_if_data *sdata);
 void ieee80211s_init(void);
 void ieee80211s_update_metric(struct ieee80211_local *local,
-		struct sta_info *stainfo, struct sk_buff *skb);
+		struct sta_info *sta, struct sk_buff *skb);
 void ieee80211s_stop(void);
 void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata);
 void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata);
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index acbd1ad..9b6da2d 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -303,7 +303,7 @@ int mesh_path_error_tx(u8 ttl, u8 *target, __le32 target_sn,
 }
 
 void ieee80211s_update_metric(struct ieee80211_local *local,
-		struct sta_info *stainfo, struct sk_buff *skb)
+		struct sta_info *sta, struct sk_buff *skb)
 {
 	struct ieee80211_tx_info *txinfo = IEEE80211_SKB_CB(skb);
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
@@ -315,9 +315,9 @@ void ieee80211s_update_metric(struct ieee80211_local *local,
 	failed = !(txinfo->flags & IEEE80211_TX_STAT_ACK);
 
 	/* moving average, scaled to 100 */
-	stainfo->fail_avg = ((80 * stainfo->fail_avg + 5) / 100 + 20 * failed);
-	if (stainfo->fail_avg > 95)
-		mesh_plink_broken(stainfo);
+	sta->fail_avg = ((80 * sta->fail_avg + 5) / 100 + 20 * failed);
+	if (sta->fail_avg > 95)
+		mesh_plink_broken(sta);
 }
 
 static u32 airtime_link_metric_get(struct ieee80211_local *local,
-- 
cgit v1.1


From 3ddd53f392c4f8e19e1110d1bdef770008b128b8 Mon Sep 17 00:00:00 2001
From: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Date: Mon, 11 Jun 2012 11:59:10 +0800
Subject: cfg80211: add missing kernel-doc for mesh configuration structure

Add the missing kernel-doc for mesh configuration parameters as pointed
out by Johannes Berg.

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/net/cfg80211.h | 59 +++++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 49 insertions(+), 10 deletions(-)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 7319f25..a129ee2 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -790,26 +790,69 @@ struct bss_parameters {
 	int ht_opmode;
 };
 
-/*
+/**
  * struct mesh_config - 802.11s mesh configuration
  *
  * These parameters can be changed while the mesh is active.
+ *
+ * @dot11MeshRetryTimeout: the initial retry timeout in millisecond units used
+ *	by the Mesh Peering Open message
+ * @dot11MeshConfirmTimeout: the initial retry timeout in millisecond units
+ *	used by the Mesh Peering Open message
+ * @dot11MeshHoldingTimeout: the confirm timeout in millisecond units used by
+ *	the mesh peering management to close a mesh peering
+ * @dot11MeshMaxPeerLinks: the maximum number of peer links allowed on this
+ *	mesh interface
+ * @dot11MeshMaxRetries: the maximum number of peer link open retries that can
+ *	be sent to establish a new peer link instance in a mesh
+ * @dot11MeshTTL: the value of TTL field set at a source mesh STA
+ * @element_ttl: the value of TTL field set at a mesh STA for path selection
+ *	elements
+ * @auto_open_plinks: whether we should automatically open peer links when we
+ *	detect compatible mesh peers
+ * @dot11MeshNbrOffsetMaxNeighbor: the maximum number of neighbors to
+ *	synchronize to for 11s default synchronization method
+ * @dot11MeshHWMPmaxPREQretries: the number of action frames containing a PREQ
+ *	that an originator mesh STA can send to a particular path target
+ * @path_refresh_time: how frequently to refresh mesh paths in milliseconds
+ * @min_discovery_timeout: the minimum length of time to wait until giving up on
+ *	a path discovery in milliseconds
+ * @dot11MeshHWMPactivePathTimeout: the time (in TUs) for which mesh STAs
+ *	receiving a PREQ shall consider the forwarding information from the
+ *	root to be valid. (TU = time unit)
+ * @dot11MeshHWMPpreqMinInterval: the minimum interval of time (in TUs) during
+ *	which a mesh STA can send only one action frame containing a PREQ
+ *	element
+ * @dot11MeshHWMPperrMinInterval: the minimum interval of time (in TUs) during
+ *	which a mesh STA can send only one Action frame containing a PERR
+ *	element
+ * @dot11MeshHWMPnetDiameterTraversalTime: the interval of time (in TUs) that
+ *	it takes for an HWMP information element to propagate across the mesh
+ * @dot11MeshHWMPRootMode: the configuration of a mesh STA as root mesh STA
+ * @dot11MeshHWMPRannInterval: the interval of time (in TUs) between root
+ *	announcements are transmitted
+ * @dot11MeshGateAnnouncementProtocol: whether to advertise that this mesh
+ *	station has access to a broader network beyond the MBSS. (This is
+ *	missnamed in draft 12.0: dot11MeshGateAnnouncementProtocol set to true
+ *	only means that the station will announce others it's a mesh gate, but
+ *	not necessarily using the gate announcement protocol. Still keeping the
+ *	same nomenclature to be in sync with the spec)
+ * @dot11MeshForwarding: whether the Mesh STA is forwarding or non-forwarding
+ *	entity (default is TRUE - forwarding entity)
+ * @rssi_threshold: the threshold for average signal strength of candidate
+ *	station to establish a peer link
+ * @ht_opmode: mesh HT protection mode
  */
 struct mesh_config {
-	/* Timeouts in ms */
-	/* Mesh plink management parameters */
 	u16 dot11MeshRetryTimeout;
 	u16 dot11MeshConfirmTimeout;
 	u16 dot11MeshHoldingTimeout;
 	u16 dot11MeshMaxPeerLinks;
 	u8  dot11MeshMaxRetries;
 	u8  dot11MeshTTL;
-	/* ttl used in path selection information elements */
 	u8  element_ttl;
 	bool auto_open_plinks;
-	/* neighbor offset synchronization */
 	u32 dot11MeshNbrOffsetMaxNeighbor;
-	/* HWMP parameters */
 	u8  dot11MeshHWMPmaxPREQretries;
 	u32 path_refresh_time;
 	u16 min_discovery_timeout;
@@ -819,10 +862,6 @@ struct mesh_config {
 	u16 dot11MeshHWMPnetDiameterTraversalTime;
 	u8  dot11MeshHWMPRootMode;
 	u16 dot11MeshHWMPRannInterval;
-	/* This is missnamed in draft 12.0: dot11MeshGateAnnouncementProtocol
-	 * set to true only means that the station will announce others it's a
-	 * mesh gate, but not necessarily using the gate announcement protocol.
-	 * Still keeping the same nomenclature to be in sync with the spec. */
 	bool  dot11MeshGateAnnouncementProtocol;
 	bool dot11MeshForwarding;
 	s32 rssi_threshold;
-- 
cgit v1.1


From a4f606ea73d56d15f28653d2242e54d58bb612e5 Mon Sep 17 00:00:00 2001
From: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Date: Mon, 11 Jun 2012 11:59:36 +0800
Subject: {nl,cfg,mac}80211: fix the coding style related to mesh parameters

fix the coding style related to mesh parameters, especially the indentation,
as pointed out by Johannes Berg.

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/linux/ieee80211.h     |  6 +--
 include/linux/nl80211.h       | 98 ++++++++++++++++++++++---------------------
 include/net/cfg80211.h        | 12 +++---
 net/mac80211/cfg.c            |  3 +-
 net/mac80211/debugfs_netdev.c | 34 +++++++--------
 net/wireless/nl80211.c        | 97 ++++++++++++++++++++++--------------------
 6 files changed, 130 insertions(+), 120 deletions(-)

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index ce9af89..f831078 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1443,7 +1443,7 @@ enum ieee80211_tdls_actioncode {
  *
  * @IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET: the default synchronization method
  * @IEEE80211_SYNC_METHOD_VENDOR: a vendor specific synchronization method
- * that will be specified in a vendor specific information element
+ *	that will be specified in a vendor specific information element
  */
 enum {
 	IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET = 1,
@@ -1455,7 +1455,7 @@ enum {
  *
  * @IEEE80211_PATH_PROTOCOL_HWMP: the default path selection protocol
  * @IEEE80211_PATH_PROTOCOL_VENDOR: a vendor specific protocol that will
- * be specified in a vendor specific information element
+ *	be specified in a vendor specific information element
  */
 enum {
 	IEEE80211_PATH_PROTOCOL_HWMP = 1,
@@ -1467,7 +1467,7 @@ enum {
  *
  * @IEEE80211_PATH_METRIC_AIRTIME: the default path selection metric
  * @IEEE80211_PATH_METRIC_VENDOR: a vendor specific metric that will be
- * specified in a vendor specific information element
+ *	specified in a vendor specific information element
  */
 enum {
 	IEEE80211_PATH_METRIC_AIRTIME = 1,
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 970afdf..c61e1621 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -2090,78 +2090,80 @@ enum nl80211_mntr_flags {
  * @__NL80211_MESHCONF_INVALID: internal use
  *
  * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in
- * millisecond units, used by the Peer Link Open message
+ *	millisecond units, used by the Peer Link Open message
  *
  * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in
- * millisecond units, used by the peer link management to close a peer link
+ *	millisecond units, used by the peer link management to close a peer link
  *
  * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in
- * millisecond units
+ *	millisecond units
  *
  * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed
- * on this mesh interface
+ *	on this mesh interface
  *
  * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link
- * open retries that can be sent to establish a new peer link instance in a
- * mesh
+ *	open retries that can be sent to establish a new peer link instance in a
+ *	mesh
  *
  * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh
- * point.
+ *	point.
  *
  * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically
- * open peer links when we detect compatible mesh peers.
+ *	open peer links when we detect compatible mesh peers.
  *
  * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames
- * containing a PREQ that an MP can send to a particular destination (path
- * target)
+ *	containing a PREQ that an MP can send to a particular destination (path
+ *	target)
  *
  * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths
- * (in milliseconds)
+ *	(in milliseconds)
  *
  * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait
- * until giving up on a path discovery (in milliseconds)
+ *	until giving up on a path discovery (in milliseconds)
  *
  * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh
- * points receiving a PREQ shall consider the forwarding information from the
- * root to be valid. (TU = time unit)
+ *	points receiving a PREQ shall consider the forwarding information from
+ *	the root to be valid. (TU = time unit)
  *
  * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in
- * TUs) during which an MP can send only one action frame containing a PREQ
- * reference element
+ *	TUs) during which an MP can send only one action frame containing a PREQ
+ *	reference element
  *
  * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
- * that it takes for an HWMP information element to propagate across the mesh
+ *	that it takes for an HWMP information element to propagate across the
+ *	mesh
  *
  * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not
  *
  * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a
- * source mesh point for path selection elements.
+ *	source mesh point for path selection elements.
  *
  * @NL80211_MESHCONF_HWMP_RANN_INTERVAL:  The interval of time (in TUs) between
- * root announcements are transmitted.
+ *	root announcements are transmitted.
  *
  * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has
- * access to a broader network beyond the MBSS.  This is done via Root
- * Announcement frames.
+ *	access to a broader network beyond the MBSS.  This is done via Root
+ *	Announcement frames.
  *
  * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in
- * TUs) during which a mesh STA can send only one Action frame containing a
- * PERR element.
+ *	TUs) during which a mesh STA can send only one Action frame containing a
+ *	PERR element.
  *
  * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding
- * or forwarding entity (default is TRUE - forwarding entity)
+ *	or forwarding entity (default is TRUE - forwarding entity)
  *
  * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the
- * threshold for average signal strength of candidate station to establish
- * a peer link.
- *
- * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
+ *	threshold for average signal strength of candidate station to establish
+ *	a peer link.
  *
  * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors
- * to synchronize to for 11s default synchronization method (see 11C.12.2.2)
+ *	to synchronize to for 11s default synchronization method
+ *	(see 11C.12.2.2)
  *
  * @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode.
  *
+ * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
+ *
  * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
  */
 enum nl80211_meshconf_params {
@@ -2203,34 +2205,36 @@ enum nl80211_meshconf_params {
  * @__NL80211_MESH_SETUP_INVALID: Internal use
  *
  * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a
- * vendor specific path selection algorithm or disable it to use the default
- * HWMP.
+ *	vendor specific path selection algorithm or disable it to use the
+ *	default HWMP.
  *
  * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a
- * vendor specific path metric or disable it to use the default Airtime
- * metric.
+ *	vendor specific path metric or disable it to use the default Airtime
+ *	metric.
  *
  * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a
- * robust security network ie, or a vendor specific information element that
- * vendors will use to identify the path selection methods and metrics in use.
+ *	robust security network ie, or a vendor specific information element
+ *	that vendors will use to identify the path selection methods and
+ *	metrics in use.
  *
  * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication
- * daemon will be authenticating mesh candidates.
+ *	daemon will be authenticating mesh candidates.
  *
  * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication
- * daemon will be securing peer link frames.  AMPE is a secured version of Mesh
- * Peering Management (MPM) and is implemented with the assistance of a
- * userspace daemon.  When this flag is set, the kernel will send peer
- * management frames to a userspace daemon that will implement AMPE
- * functionality (security capabilities selection, key confirmation, and key
- * management).  When the flag is unset (default), the kernel can autonomously
- * complete (unsecured) mesh peering without the need of a userspace daemon.
- *
- * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
+ *	daemon will be securing peer link frames.  AMPE is a secured version of
+ *	Mesh Peering Management (MPM) and is implemented with the assistance of
+ *	a userspace daemon.  When this flag is set, the kernel will send peer
+ *	management frames to a userspace daemon that will implement AMPE
+ *	functionality (security capabilities selection, key confirmation, and
+ *	key management).  When the flag is unset (default), the kernel can
+ *	autonomously complete (unsecured) mesh peering without the need of a
+ *	userspace daemon.
  *
  * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a
- * vendor specific synchronization method or disable it to use the default
- * neighbor offset synchronization
+ *	vendor specific synchronization method or disable it to use the default
+ *	neighbor offset synchronization
+ *
+ * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
  *
  * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
  */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index a129ee2..778e533 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -848,21 +848,21 @@ struct mesh_config {
 	u16 dot11MeshConfirmTimeout;
 	u16 dot11MeshHoldingTimeout;
 	u16 dot11MeshMaxPeerLinks;
-	u8  dot11MeshMaxRetries;
-	u8  dot11MeshTTL;
-	u8  element_ttl;
+	u8 dot11MeshMaxRetries;
+	u8 dot11MeshTTL;
+	u8 element_ttl;
 	bool auto_open_plinks;
 	u32 dot11MeshNbrOffsetMaxNeighbor;
-	u8  dot11MeshHWMPmaxPREQretries;
+	u8 dot11MeshHWMPmaxPREQretries;
 	u32 path_refresh_time;
 	u16 min_discovery_timeout;
 	u32 dot11MeshHWMPactivePathTimeout;
 	u16 dot11MeshHWMPpreqMinInterval;
 	u16 dot11MeshHWMPperrMinInterval;
 	u16 dot11MeshHWMPnetDiameterTraversalTime;
-	u8  dot11MeshHWMPRootMode;
+	u8 dot11MeshHWMPRootMode;
 	u16 dot11MeshHWMPRannInterval;
-	bool  dot11MeshGateAnnouncementProtocol;
+	bool dot11MeshGateAnnouncementProtocol;
 	bool dot11MeshForwarding;
 	s32 rssi_threshold;
 	u16 ht_opmode;
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 498c94e..f41f9be 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1571,10 +1571,9 @@ static int ieee80211_update_mesh_config(struct wiphy *wiphy,
 		conf->dot11MeshGateAnnouncementProtocol =
 			nconf->dot11MeshGateAnnouncementProtocol;
 	}
-	if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_RANN_INTERVAL, mask)) {
+	if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_RANN_INTERVAL, mask))
 		conf->dot11MeshHWMPRannInterval =
 			nconf->dot11MeshHWMPRannInterval;
-	}
 	if (_chg_mesh_attr(NL80211_MESHCONF_FORWARDING, mask))
 		conf->dot11MeshForwarding = nconf->dot11MeshForwarding;
 	if (_chg_mesh_attr(NL80211_MESHCONF_RSSI_THRESHOLD, mask)) {
diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c
index d4272ff..c429417 100644
--- a/net/mac80211/debugfs_netdev.c
+++ b/net/mac80211/debugfs_netdev.c
@@ -468,45 +468,45 @@ IEEE80211_IF_FILE(fwded_unicast, u.mesh.mshstats.fwded_unicast, DEC);
 IEEE80211_IF_FILE(fwded_frames, u.mesh.mshstats.fwded_frames, DEC);
 IEEE80211_IF_FILE(dropped_frames_ttl, u.mesh.mshstats.dropped_frames_ttl, DEC);
 IEEE80211_IF_FILE(dropped_frames_congestion,
-		u.mesh.mshstats.dropped_frames_congestion, DEC);
+		  u.mesh.mshstats.dropped_frames_congestion, DEC);
 IEEE80211_IF_FILE(dropped_frames_no_route,
-		u.mesh.mshstats.dropped_frames_no_route, DEC);
+		  u.mesh.mshstats.dropped_frames_no_route, DEC);
 IEEE80211_IF_FILE(estab_plinks, u.mesh.mshstats.estab_plinks, ATOMIC);
 
 /* Mesh parameters */
 IEEE80211_IF_FILE(dot11MeshMaxRetries,
-		u.mesh.mshcfg.dot11MeshMaxRetries, DEC);
+		  u.mesh.mshcfg.dot11MeshMaxRetries, DEC);
 IEEE80211_IF_FILE(dot11MeshRetryTimeout,
-		u.mesh.mshcfg.dot11MeshRetryTimeout, DEC);
+		  u.mesh.mshcfg.dot11MeshRetryTimeout, DEC);
 IEEE80211_IF_FILE(dot11MeshConfirmTimeout,
-		u.mesh.mshcfg.dot11MeshConfirmTimeout, DEC);
+		  u.mesh.mshcfg.dot11MeshConfirmTimeout, DEC);
 IEEE80211_IF_FILE(dot11MeshHoldingTimeout,
-		u.mesh.mshcfg.dot11MeshHoldingTimeout, DEC);
+		  u.mesh.mshcfg.dot11MeshHoldingTimeout, DEC);
 IEEE80211_IF_FILE(dot11MeshTTL, u.mesh.mshcfg.dot11MeshTTL, DEC);
 IEEE80211_IF_FILE(element_ttl, u.mesh.mshcfg.element_ttl, DEC);
 IEEE80211_IF_FILE(auto_open_plinks, u.mesh.mshcfg.auto_open_plinks, DEC);
 IEEE80211_IF_FILE(dot11MeshMaxPeerLinks,
-		u.mesh.mshcfg.dot11MeshMaxPeerLinks, DEC);
+		  u.mesh.mshcfg.dot11MeshMaxPeerLinks, DEC);
 IEEE80211_IF_FILE(dot11MeshHWMPactivePathTimeout,
-		u.mesh.mshcfg.dot11MeshHWMPactivePathTimeout, DEC);
+		  u.mesh.mshcfg.dot11MeshHWMPactivePathTimeout, DEC);
 IEEE80211_IF_FILE(dot11MeshHWMPpreqMinInterval,
-		u.mesh.mshcfg.dot11MeshHWMPpreqMinInterval, DEC);
+		  u.mesh.mshcfg.dot11MeshHWMPpreqMinInterval, DEC);
 IEEE80211_IF_FILE(dot11MeshHWMPperrMinInterval,
-		u.mesh.mshcfg.dot11MeshHWMPperrMinInterval, DEC);
+		  u.mesh.mshcfg.dot11MeshHWMPperrMinInterval, DEC);
 IEEE80211_IF_FILE(dot11MeshHWMPnetDiameterTraversalTime,
-		u.mesh.mshcfg.dot11MeshHWMPnetDiameterTraversalTime, DEC);
+		  u.mesh.mshcfg.dot11MeshHWMPnetDiameterTraversalTime, DEC);
 IEEE80211_IF_FILE(dot11MeshHWMPmaxPREQretries,
-		u.mesh.mshcfg.dot11MeshHWMPmaxPREQretries, DEC);
+		  u.mesh.mshcfg.dot11MeshHWMPmaxPREQretries, DEC);
 IEEE80211_IF_FILE(path_refresh_time,
-		u.mesh.mshcfg.path_refresh_time, DEC);
+		  u.mesh.mshcfg.path_refresh_time, DEC);
 IEEE80211_IF_FILE(min_discovery_timeout,
-		u.mesh.mshcfg.min_discovery_timeout, DEC);
+		  u.mesh.mshcfg.min_discovery_timeout, DEC);
 IEEE80211_IF_FILE(dot11MeshHWMPRootMode,
-		u.mesh.mshcfg.dot11MeshHWMPRootMode, DEC);
+		  u.mesh.mshcfg.dot11MeshHWMPRootMode, DEC);
 IEEE80211_IF_FILE(dot11MeshGateAnnouncementProtocol,
-		u.mesh.mshcfg.dot11MeshGateAnnouncementProtocol, DEC);
+		  u.mesh.mshcfg.dot11MeshGateAnnouncementProtocol, DEC);
 IEEE80211_IF_FILE(dot11MeshHWMPRannInterval,
-		u.mesh.mshcfg.dot11MeshHWMPRannInterval, DEC);
+		  u.mesh.mshcfg.dot11MeshHWMPRannInterval, DEC);
 IEEE80211_IF_FILE(dot11MeshForwarding, u.mesh.mshcfg.dot11MeshForwarding, DEC);
 IEEE80211_IF_FILE(rssi_threshold, u.mesh.mshcfg.rssi_threshold, DEC);
 IEEE80211_IF_FILE(ht_opmode, u.mesh.mshcfg.ht_opmode, DEC);
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 7ae54b8..dd94ee5 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -115,7 +115,7 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
 	[NL80211_ATTR_STA_VLAN] = { .type = NLA_U32 },
 	[NL80211_ATTR_MNTR_FLAGS] = { /* NLA_NESTED can't be empty */ },
 	[NL80211_ATTR_MESH_ID] = { .type = NLA_BINARY,
-				.len = IEEE80211_MAX_MESH_ID_LEN },
+				   .len = IEEE80211_MAX_MESH_ID_LEN },
 	[NL80211_ATTR_MPATH_NEXT_HOP] = { .type = NLA_U32 },
 
 	[NL80211_ATTR_REG_ALPHA2] = { .type = NLA_STRING, .len = 2 },
@@ -3492,7 +3492,6 @@ static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_A
 	[NL80211_MESHCONF_ELEMENT_TTL] = { .type = NLA_U8 },
 	[NL80211_MESHCONF_AUTO_OPEN_PLINKS] = { .type = NLA_U8 },
 	[NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR] = { .type = NLA_U32 },
-
 	[NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES] = { .type = NLA_U8 },
 	[NL80211_MESHCONF_PATH_REFRESH_TIME] = { .type = NLA_U32 },
 	[NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT] = { .type = NLA_U16 },
@@ -3504,8 +3503,8 @@ static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_A
 	[NL80211_MESHCONF_HWMP_RANN_INTERVAL] = { .type = NLA_U16 },
 	[NL80211_MESHCONF_GATE_ANNOUNCEMENTS] = { .type = NLA_U8 },
 	[NL80211_MESHCONF_FORWARDING] = { .type = NLA_U8 },
-	[NL80211_MESHCONF_RSSI_THRESHOLD] = { .type = NLA_U32},
-	[NL80211_MESHCONF_HT_OPMODE] = { .type = NLA_U16},
+	[NL80211_MESHCONF_RSSI_THRESHOLD] = { .type = NLA_U32 },
+	[NL80211_MESHCONF_HT_OPMODE] = { .type = NLA_U16 },
 };
 
 static const struct nla_policy
@@ -3515,7 +3514,7 @@ static const struct nla_policy
 	[NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC] = { .type = NLA_U8 },
 	[NL80211_MESH_SETUP_USERSPACE_AUTH] = { .type = NLA_FLAG },
 	[NL80211_MESH_SETUP_IE] = { .type = NLA_BINARY,
-		.len = IEEE80211_MAX_DATA_LEN },
+				    .len = IEEE80211_MAX_DATA_LEN },
 	[NL80211_MESH_SETUP_USERSPACE_AMPE] = { .type = NLA_FLAG },
 };
 
@@ -3548,63 +3547,71 @@ do {\
 
 	/* Fill in the params struct */
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshRetryTimeout,
-			mask, NL80211_MESHCONF_RETRY_TIMEOUT, nla_get_u16);
+				  mask, NL80211_MESHCONF_RETRY_TIMEOUT,
+				  nla_get_u16);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshConfirmTimeout,
-			mask, NL80211_MESHCONF_CONFIRM_TIMEOUT, nla_get_u16);
+				  mask, NL80211_MESHCONF_CONFIRM_TIMEOUT,
+				  nla_get_u16);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHoldingTimeout,
-			mask, NL80211_MESHCONF_HOLDING_TIMEOUT, nla_get_u16);
+				  mask, NL80211_MESHCONF_HOLDING_TIMEOUT,
+				  nla_get_u16);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshMaxPeerLinks,
-			mask, NL80211_MESHCONF_MAX_PEER_LINKS, nla_get_u16);
+				  mask, NL80211_MESHCONF_MAX_PEER_LINKS,
+				  nla_get_u16);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshMaxRetries,
-			mask, NL80211_MESHCONF_MAX_RETRIES, nla_get_u8);
+				  mask, NL80211_MESHCONF_MAX_RETRIES,
+				  nla_get_u8);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshTTL,
-			mask, NL80211_MESHCONF_TTL, nla_get_u8);
+				  mask, NL80211_MESHCONF_TTL, nla_get_u8);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, element_ttl,
-			mask, NL80211_MESHCONF_ELEMENT_TTL, nla_get_u8);
+				  mask, NL80211_MESHCONF_ELEMENT_TTL,
+				  nla_get_u8);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, auto_open_plinks,
-			mask, NL80211_MESHCONF_AUTO_OPEN_PLINKS, nla_get_u8);
-	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshNbrOffsetMaxNeighbor,
-			mask, NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR,
-			nla_get_u32);
+				  mask, NL80211_MESHCONF_AUTO_OPEN_PLINKS,
+				  nla_get_u8);
+	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshNbrOffsetMaxNeighbor, mask,
+				  NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR,
+				  nla_get_u32);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPmaxPREQretries,
-			mask, NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
-			nla_get_u8);
+				  mask, NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
+				  nla_get_u8);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, path_refresh_time,
-			mask, NL80211_MESHCONF_PATH_REFRESH_TIME, nla_get_u32);
+				  mask, NL80211_MESHCONF_PATH_REFRESH_TIME,
+				  nla_get_u32);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, min_discovery_timeout,
-			mask, NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
-			nla_get_u16);
-	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPactivePathTimeout,
-			mask, NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
-			nla_get_u32);
+				  mask, NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
+				  nla_get_u16);
+	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPactivePathTimeout, mask,
+				  NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
+				  nla_get_u32);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPpreqMinInterval,
-			mask, NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
-			nla_get_u16);
+				  mask, NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
+				  nla_get_u16);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPperrMinInterval,
-			mask, NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL,
-			nla_get_u16);
-	FILL_IN_MESH_PARAM_IF_SET(tb, cfg,
-			dot11MeshHWMPnetDiameterTraversalTime,
-			mask, NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
-			nla_get_u16);
-	FILL_IN_MESH_PARAM_IF_SET(tb, cfg,
-			dot11MeshHWMPRootMode, mask,
-			NL80211_MESHCONF_HWMP_ROOTMODE,
-			nla_get_u8);
+				  mask, NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL,
+				  nla_get_u16);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg,
-			dot11MeshHWMPRannInterval, mask,
-			NL80211_MESHCONF_HWMP_RANN_INTERVAL,
-			nla_get_u16);
+				  dot11MeshHWMPnetDiameterTraversalTime, mask,
+				  NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
+				  nla_get_u16);
+	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPRootMode, mask,
+				  NL80211_MESHCONF_HWMP_ROOTMODE, nla_get_u8);
+	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPRannInterval, mask,
+				  NL80211_MESHCONF_HWMP_RANN_INTERVAL,
+				  nla_get_u16);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg,
-			dot11MeshGateAnnouncementProtocol, mask,
-			NL80211_MESHCONF_GATE_ANNOUNCEMENTS,
-			nla_get_u8);
+				  dot11MeshGateAnnouncementProtocol, mask,
+				  NL80211_MESHCONF_GATE_ANNOUNCEMENTS,
+				  nla_get_u8);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshForwarding,
-			mask, NL80211_MESHCONF_FORWARDING, nla_get_u8);
+				  mask, NL80211_MESHCONF_FORWARDING,
+				  nla_get_u8);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, rssi_threshold,
-			mask, NL80211_MESHCONF_RSSI_THRESHOLD, nla_get_u32);
+				  mask, NL80211_MESHCONF_RSSI_THRESHOLD,
+				  nla_get_u32);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, ht_opmode,
-			mask, NL80211_MESHCONF_HT_OPMODE, nla_get_u16);
+				  mask, NL80211_MESHCONF_HT_OPMODE,
+				  nla_get_u16);
 	if (mask_out)
 		*mask_out = mask;
 
-- 
cgit v1.1


From f1ff32e8a8672d4d59283fb7f61f1431c2b9e434 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 30 May 2012 01:58:39 -0700
Subject: ath6kl: Add missing newline terminations

Messages without newlines can be interleaved.
Avoid this by adding terminations.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index 6f20998..d212903 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -1001,7 +1001,7 @@ static int ath6kl_cfg80211_scan(struct wiphy *wiphy, struct net_device *ndev,
 				       WMI_FRAME_PROBE_REQ,
 				       request->ie, request->ie_len);
 	if (ret) {
-		ath6kl_err("failed to set Probe Request appie for scan");
+		ath6kl_err("failed to set Probe Request appie for scan\n");
 		return ret;
 	}
 
@@ -3288,7 +3288,7 @@ static int ath6kl_cfg80211_sscan_start(struct wiphy *wiphy,
 				       WMI_FRAME_PROBE_REQ,
 				       request->ie, request->ie_len);
 	if (ret) {
-		ath6kl_warn("Failed to set probe request IE for scheduled scan: %d",
+		ath6kl_warn("Failed to set probe request IE for scheduled scan: %d\n",
 			    ret);
 		return ret;
 	}
-- 
cgit v1.1


From d154f32ebe3ffe9dea6ed0a91767883b1e7a6bc0 Mon Sep 17 00:00:00 2001
From: Etay Luz <eluz@qca.qualcomm.com>
Date: Wed, 30 May 2012 11:35:08 +0300
Subject: ath6kl: support changing dtim period on AP mode

This patch adds support for dtim_period configuration in beacon.

kvalo: add a comment about ignoring the error, use vif_idx,
add \n to the warning message

Signed-off-by: Etay Luz <eluz@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c |  8 +++++++-
 drivers/net/wireless/ath/ath6kl/wmi.c      | 16 ++++++++++++++++
 drivers/net/wireless/ath/ath6kl/wmi.h      |  5 +++++
 3 files changed, 28 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index d212903..f00d3773 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -2783,9 +2783,15 @@ static int ath6kl_start_ap(struct wiphy *wiphy, struct net_device *dev,
 
 	/* TODO:
 	 * info->interval
-	 * info->dtim_period
 	 */
 
+	ret = ath6kl_wmi_ap_set_dtim_cmd(ar->wmi, vif->fw_vif_idx,
+					 info->dtim_period);
+
+	/* ignore error, just print a warning and continue normally */
+	if (ret)
+		ath6kl_warn("Failed to set dtim_period in beacon: %d\n", ret);
+
 	if (info->beacon.head == NULL)
 		return -EINVAL;
 	mgmt = (struct ieee80211_mgmt *) info->beacon.head;
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c
index 43bce9c..a6caa67 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.c
+++ b/drivers/net/wireless/ath/ath6kl/wmi.c
@@ -752,6 +752,22 @@ int ath6kl_wmi_force_roam_cmd(struct wmi *wmi, const u8 *bssid)
 				   NO_SYNC_WMIFLAG);
 }
 
+int ath6kl_wmi_ap_set_dtim_cmd(struct wmi *wmi, u8 if_idx, u32 dtim_period)
+{
+	struct sk_buff *skb;
+	struct set_dtim_cmd *cmd;
+
+	skb = ath6kl_wmi_get_new_buf(sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct set_dtim_cmd *) skb->data;
+
+	cmd->dtim_period = cpu_to_le32(dtim_period);
+	return ath6kl_wmi_cmd_send(wmi, if_idx, skb,
+				   WMI_AP_SET_DTIM_CMDID, NO_SYNC_WMIFLAG);
+}
+
 int ath6kl_wmi_set_roam_mode_cmd(struct wmi *wmi, enum wmi_roam_mode mode)
 {
 	struct sk_buff *skb;
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.h b/drivers/net/wireless/ath/ath6kl/wmi.h
index 7c94fe3..43339ac 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.h
+++ b/drivers/net/wireless/ath/ath6kl/wmi.h
@@ -1617,6 +1617,10 @@ struct roam_ctrl_cmd {
 	u8 roam_ctrl;
 } __packed;
 
+struct set_dtim_cmd {
+	__le32 dtim_period;
+} __packed;
+
 /* BSS INFO HDR version 2.0 */
 struct wmi_bss_info_hdr2 {
 	__le16 ch; /* frequency in MHz */
@@ -2589,6 +2593,7 @@ int ath6kl_wmi_add_wow_pattern_cmd(struct wmi *wmi, u8 if_idx,
 int ath6kl_wmi_del_wow_pattern_cmd(struct wmi *wmi, u8 if_idx,
 				   u16 list_id, u16 filter_id);
 int ath6kl_wmi_set_roam_lrssi_cmd(struct wmi *wmi, u8 lrssi);
+int ath6kl_wmi_ap_set_dtim_cmd(struct wmi *wmi, u8 if_idx, u32 dtim_period);
 int ath6kl_wmi_force_roam_cmd(struct wmi *wmi, const u8 *bssid);
 int ath6kl_wmi_set_roam_mode_cmd(struct wmi *wmi, enum wmi_roam_mode mode);
 int ath6kl_wmi_mcast_filter_cmd(struct wmi *wmi, u8 if_idx, bool mc_all_on);
-- 
cgit v1.1


From 0faf745872f6d00afb318185e8fb181587974b5a Mon Sep 17 00:00:00 2001
From: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Date: Wed, 30 May 2012 12:27:11 +0530
Subject: ath6kl: Fix race in aggregation reorder logic

There are many places where tid data are accessed without
the lock (rxtid->lock), this can lead to a race condition
when the timeout handler for aggregatin reorder and the
receive function are getting executed at the same time.
Fix this race, but still there are races which can not
be fixed without rewriting the whole aggregation reorder
logic, for now fix the obvious ones.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/core.h | 12 +++++++++---
 drivers/net/wireless/ath/ath6kl/txrx.c | 12 +++++++++---
 2 files changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h
index 17a44fa..12441f7 100644
--- a/drivers/net/wireless/ath/ath6kl/core.h
+++ b/drivers/net/wireless/ath/ath6kl/core.h
@@ -273,9 +273,15 @@ struct rxtid {
 	struct sk_buff_head q;
 
 	/*
-	 * FIXME: No clue what this should protect. Apparently it should
-	 * protect some of the fields above but they are also accessed
-	 * without taking the lock.
+	 * lock mainly protects seq_next and hold_q. Movement of seq_next
+	 * needs to be protected between aggr_timeout() and
+	 * aggr_process_recv_frm(). hold_q will be holding the pending
+	 * reorder frames and it's access should also be protected.
+	 * Some of the other fields like hold_q_sz, win_sz and aggr are
+	 * initialized/reset when receiving addba/delba req, also while
+	 * deleting aggr state all the pending buffers are flushed before
+	 * resetting these fields, so there should not be any race in accessing
+	 * these fields.
 	 */
 	spinlock_t lock;
 };
diff --git a/drivers/net/wireless/ath/ath6kl/txrx.c b/drivers/net/wireless/ath/ath6kl/txrx.c
index 67206ae..974c510 100644
--- a/drivers/net/wireless/ath/ath6kl/txrx.c
+++ b/drivers/net/wireless/ath/ath6kl/txrx.c
@@ -1036,6 +1036,7 @@ static void aggr_deque_frms(struct aggr_info_conn *agg_conn, u8 tid,
 	rxtid = &agg_conn->rx_tid[tid];
 	stats = &agg_conn->stat[tid];
 
+	spin_lock_bh(&rxtid->lock);
 	idx = AGGR_WIN_IDX(rxtid->seq_next, rxtid->hold_q_sz);
 
 	/*
@@ -1054,8 +1055,6 @@ static void aggr_deque_frms(struct aggr_info_conn *agg_conn, u8 tid,
 	seq_end = seq_no ? seq_no : rxtid->seq_next;
 	idx_end = AGGR_WIN_IDX(seq_end, rxtid->hold_q_sz);
 
-	spin_lock_bh(&rxtid->lock);
-
 	do {
 		node = &rxtid->hold_q[idx];
 		if ((order == 1) && (!node->skb))
@@ -1127,11 +1126,13 @@ static bool aggr_process_recv_frm(struct aggr_info_conn *agg_conn, u8 tid,
 		    ((end > extended_end) && (cur > extended_end) &&
 		     (cur < end))) {
 			aggr_deque_frms(agg_conn, tid, 0, 0);
+			spin_lock_bh(&rxtid->lock);
 			if (cur >= rxtid->hold_q_sz - 1)
 				rxtid->seq_next = cur - (rxtid->hold_q_sz - 1);
 			else
 				rxtid->seq_next = ATH6KL_MAX_SEQ_NO -
 						  (rxtid->hold_q_sz - 2 - cur);
+			spin_unlock_bh(&rxtid->lock);
 		} else {
 			/*
 			 * Dequeue only those frames that are outside the
@@ -1186,7 +1187,8 @@ static bool aggr_process_recv_frm(struct aggr_info_conn *agg_conn, u8 tid,
 
 	if (agg_conn->timer_scheduled)
 		rxtid->progress = true;
-	else
+	else {
+		spin_lock_bh(&rxtid->lock);
 		for (idx = 0 ; idx < rxtid->hold_q_sz; idx++) {
 			if (rxtid->hold_q[idx].skb) {
 				/*
@@ -1204,6 +1206,8 @@ static bool aggr_process_recv_frm(struct aggr_info_conn *agg_conn, u8 tid,
 				break;
 			}
 		}
+		spin_unlock_bh(&rxtid->lock);
+	}
 
 	return is_queued;
 }
@@ -1626,6 +1630,7 @@ static void aggr_timeout(unsigned long arg)
 		rxtid = &aggr_conn->rx_tid[i];
 
 		if (rxtid->aggr && rxtid->hold_q) {
+			spin_lock_bh(&rxtid->lock);
 			for (j = 0; j < rxtid->hold_q_sz; j++) {
 				if (rxtid->hold_q[j].skb) {
 					aggr_conn->timer_scheduled = true;
@@ -1634,6 +1639,7 @@ static void aggr_timeout(unsigned long arg)
 					break;
 				}
 			}
+			spin_unlock_bh(&rxtid->lock);
 
 			if (j >= rxtid->hold_q_sz)
 				rxtid->timer_mon = false;
-- 
cgit v1.1


From 7940bad50859026c0f11d2b7766571175b5e55c3 Mon Sep 17 00:00:00 2001
From: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Date: Wed, 30 May 2012 12:27:12 +0530
Subject: ath6kl: Fix unstable downlink throughput

There is frequent downlink throughput drop to 0 when operating
at the signal level between -42dBm to -53dBm. This has been root
caused to the delay in releasing pending a-mpdu subframes in
reorder buffer. Right now the timeout value is 400ms, there
is also a race condition where timeout handler can be delayed
to run at an extra timeout interval. This patch reduces the
timout interval to reasonable 100ms and makes sure releasing
pending frames are not skipped in the timeout handler by removing
the flag (rxtid->progress) which can delay the timeout logic.

Reported-by: Yu Yanzhi <yanzhiy@qca.qualcomm.com>
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/core.h |  3 +--
 drivers/net/wireless/ath/ath6kl/txrx.c | 42 +++++++++++++++-------------------
 2 files changed, 19 insertions(+), 26 deletions(-)

diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h
index 12441f7..b3eee10 100644
--- a/drivers/net/wireless/ath/ath6kl/core.h
+++ b/drivers/net/wireless/ath/ath6kl/core.h
@@ -215,7 +215,7 @@ enum ath6kl_hw_flags {
 
 #define AGGR_NUM_OF_FREE_NETBUFS    16
 
-#define AGGR_RX_TIMEOUT     400	/* in ms */
+#define AGGR_RX_TIMEOUT     100	/* in ms */
 
 #define WMI_TIMEOUT (2 * HZ)
 
@@ -264,7 +264,6 @@ struct skb_hold_q {
 
 struct rxtid {
 	bool aggr;
-	bool progress;
 	bool timer_mon;
 	u16 win_sz;
 	u16 seq_next;
diff --git a/drivers/net/wireless/ath/ath6kl/txrx.c b/drivers/net/wireless/ath/ath6kl/txrx.c
index 974c510..7dfa0fd 100644
--- a/drivers/net/wireless/ath/ath6kl/txrx.c
+++ b/drivers/net/wireless/ath/ath6kl/txrx.c
@@ -1186,28 +1186,25 @@ static bool aggr_process_recv_frm(struct aggr_info_conn *agg_conn, u8 tid,
 	aggr_deque_frms(agg_conn, tid, 0, 1);
 
 	if (agg_conn->timer_scheduled)
-		rxtid->progress = true;
-	else {
-		spin_lock_bh(&rxtid->lock);
-		for (idx = 0 ; idx < rxtid->hold_q_sz; idx++) {
-			if (rxtid->hold_q[idx].skb) {
-				/*
-				 * There is a frame in the queue and no
-				 * timer so start a timer to ensure that
-				 * the frame doesn't remain stuck
-				 * forever.
-				 */
-				agg_conn->timer_scheduled = true;
-				mod_timer(&agg_conn->timer,
-					  (jiffies +
-					   HZ * (AGGR_RX_TIMEOUT) / 1000));
-				rxtid->progress = false;
-				rxtid->timer_mon = true;
-				break;
-			}
+		return is_queued;
+
+	spin_lock_bh(&rxtid->lock);
+	for (idx = 0 ; idx < rxtid->hold_q_sz; idx++) {
+		if (rxtid->hold_q[idx].skb) {
+			/*
+			 * There is a frame in the queue and no
+			 * timer so start a timer to ensure that
+			 * the frame doesn't remain stuck
+			 * forever.
+			 */
+			agg_conn->timer_scheduled = true;
+			mod_timer(&agg_conn->timer,
+				  (jiffies + (HZ * AGGR_RX_TIMEOUT) / 1000));
+			rxtid->timer_mon = true;
+			break;
 		}
-		spin_unlock_bh(&rxtid->lock);
 	}
+	spin_unlock_bh(&rxtid->lock);
 
 	return is_queued;
 }
@@ -1612,7 +1609,7 @@ static void aggr_timeout(unsigned long arg)
 		rxtid = &aggr_conn->rx_tid[i];
 		stats = &aggr_conn->stat[i];
 
-		if (!rxtid->aggr || !rxtid->timer_mon || rxtid->progress)
+		if (!rxtid->aggr || !rxtid->timer_mon)
 			continue;
 
 		stats->num_timeouts++;
@@ -1635,7 +1632,6 @@ static void aggr_timeout(unsigned long arg)
 				if (rxtid->hold_q[j].skb) {
 					aggr_conn->timer_scheduled = true;
 					rxtid->timer_mon = true;
-					rxtid->progress = false;
 					break;
 				}
 			}
@@ -1666,7 +1662,6 @@ static void aggr_delete_tid_state(struct aggr_info_conn *aggr_conn, u8 tid)
 		aggr_deque_frms(aggr_conn, tid, 0, 0);
 
 	rxtid->aggr = false;
-	rxtid->progress = false;
 	rxtid->timer_mon = false;
 	rxtid->win_sz = 0;
 	rxtid->seq_next = 0;
@@ -1745,7 +1740,6 @@ void aggr_conn_init(struct ath6kl_vif *vif, struct aggr_info *aggr_info,
 	for (i = 0; i < NUM_OF_TIDS; i++) {
 		rxtid = &aggr_conn->rx_tid[i];
 		rxtid->aggr = false;
-		rxtid->progress = false;
 		rxtid->timer_mon = false;
 		skb_queue_head_init(&rxtid->q);
 		spin_lock_init(&rxtid->lock);
-- 
cgit v1.1


From b5b6f6a9a07ac230d54a85a9fb9e691c85f2eb0a Mon Sep 17 00:00:00 2001
From: Naveen Singh <navesing@qca.qualcomm.com>
Date: Thu, 7 Jun 2012 00:44:02 -0700
Subject: ath6kl: use firmware version from FW IE

Need to have different FW versioning for different FW binaries.
This is handled by appending different meta data in firmware
binaries.

kvalo: add an empty line before a debug message, use '0' instead of '0x00',
fix indentation

Signed-off-by: Naveen Singh <navesing@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/init.c |  8 ++++++++
 drivers/net/wireless/ath/ath6kl/main.c | 22 +++++++++++++---------
 2 files changed, 21 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c
index daf24ee..62e25cc 100644
--- a/drivers/net/wireless/ath/ath6kl/init.c
+++ b/drivers/net/wireless/ath/ath6kl/init.c
@@ -943,6 +943,14 @@ static int ath6kl_fetch_fw_apin(struct ath6kl *ar, const char *name)
 		}
 
 		switch (ie_id) {
+		case ATH6KL_FW_IE_FW_VERSION:
+			strlcpy(ar->wiphy->fw_version, data,
+				sizeof(ar->wiphy->fw_version));
+
+			ath6kl_dbg(ATH6KL_DBG_BOOT,
+				   "found fw version %s\n",
+				    ar->wiphy->fw_version);
+			break;
 		case ATH6KL_FW_IE_OTP_IMAGE:
 			ath6kl_dbg(ATH6KL_DBG_BOOT, "found otp image ie (%zd B)\n",
 				   ie_len);
diff --git a/drivers/net/wireless/ath/ath6kl/main.c b/drivers/net/wireless/ath/ath6kl/main.c
index 3e6768a..45621ba 100644
--- a/drivers/net/wireless/ath/ath6kl/main.c
+++ b/drivers/net/wireless/ath/ath6kl/main.c
@@ -554,20 +554,24 @@ void ath6kl_ready_event(void *devt, u8 *datap, u32 sw_ver, u32 abi_ver,
 	struct ath6kl *ar = devt;
 
 	memcpy(ar->mac_addr, datap, ETH_ALEN);
-	ath6kl_dbg(ATH6KL_DBG_TRC, "%s: mac addr = %pM\n",
-		   __func__, ar->mac_addr);
+
+	ath6kl_dbg(ATH6KL_DBG_BOOT,
+		   "ready event mac addr %pM sw_ver 0x%x abi_ver 0x%x cap 0x%x\n",
+		   ar->mac_addr, sw_ver, abi_ver, cap);
 
 	ar->version.wlan_ver = sw_ver;
 	ar->version.abi_ver = abi_ver;
 	ar->hw.cap = cap;
 
-	snprintf(ar->wiphy->fw_version,
-		 sizeof(ar->wiphy->fw_version),
-		 "%u.%u.%u.%u",
-		 (ar->version.wlan_ver & 0xf0000000) >> 28,
-		 (ar->version.wlan_ver & 0x0f000000) >> 24,
-		 (ar->version.wlan_ver & 0x00ff0000) >> 16,
-		 (ar->version.wlan_ver & 0x0000ffff));
+	if (strlen(ar->wiphy->fw_version) == 0) {
+		snprintf(ar->wiphy->fw_version,
+			 sizeof(ar->wiphy->fw_version),
+			 "%u.%u.%u.%u",
+			 (ar->version.wlan_ver & 0xf0000000) >> 28,
+			 (ar->version.wlan_ver & 0x0f000000) >> 24,
+			 (ar->version.wlan_ver & 0x00ff0000) >> 16,
+			 (ar->version.wlan_ver & 0x0000ffff));
+	}
 
 	/* indicate to the waiting thread that the ready event was received */
 	set_bit(WMI_READY, &ar->flag);
-- 
cgit v1.1


From cef28271be62e672637f1ba2a019a5a9a981eb2d Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Mon, 11 Jun 2012 11:34:18 +0200
Subject: mac80211: remove unneeded ieee80211_run_deferred_scan()

Ilan pointed out to me that ieee80211_start_next_roc()
already calls ieee80211_run_deferred_scan() if the list
of ROC items is empty, so there's no need to call it
again after calling ieee80211_start_next_roc().

Reported-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/cfg.c        | 1 -
 net/mac80211/offchannel.c | 5 -----
 2 files changed, 6 deletions(-)

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index f41f9be..93d203c 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -2330,7 +2330,6 @@ static int ieee80211_cancel_roc(struct ieee80211_local *local,
 
 		list_del(&found->list);
 
-		ieee80211_run_deferred_scan(local);
 		ieee80211_start_next_roc(local);
 		mutex_unlock(&local->mtx);
 
diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c
index abb226d..fcb01ee 100644
--- a/net/mac80211/offchannel.c
+++ b/net/mac80211/offchannel.c
@@ -379,7 +379,6 @@ void ieee80211_sw_roc_work(struct work_struct *work)
 		ieee80211_recalc_idle(local);
 
 		ieee80211_start_next_roc(local);
-		ieee80211_run_deferred_scan(local);
 	}
 
  out_unlock:
@@ -410,9 +409,6 @@ static void ieee80211_hw_roc_done(struct work_struct *work)
 	/* if there's another roc, start it now */
 	ieee80211_start_next_roc(local);
 
-	/* or scan maybe */
-	ieee80211_run_deferred_scan(local);
-
  out_unlock:
 	mutex_unlock(&local->mtx);
 }
@@ -455,7 +451,6 @@ void ieee80211_roc_purge(struct ieee80211_sub_if_data *sdata)
 	}
 
 	ieee80211_start_next_roc(local);
-	ieee80211_run_deferred_scan(local);
 	mutex_unlock(&local->mtx);
 
 	list_for_each_entry_safe(roc, tmp, &tmp_list, list) {
-- 
cgit v1.1


From 535588e61a007416f46cf08b4ccb6cc73b3f6fb0 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Mon, 11 Jun 2012 18:14:16 -0700
Subject: ieee80211: definitions for Microsoft Vendor OUI and WPA OUI type

Reference: http://standards.ieee.org/develop/regauth/oui/oui.txt

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/linux/ieee80211.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index f831078..98c86ff6 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1589,6 +1589,8 @@ enum ieee80211_sa_query_action {
 
 #define WLAN_OUI_WFA			0x506f9a
 #define WLAN_OUI_TYPE_WFA_P2P		9
+#define WLAN_OUI_MICROSOFT		0x0050f2
+#define WLAN_OUI_TYPE_MICROSOFT_WPA	1
 
 /*
  * WMM/802.11e Tspec Element
-- 
cgit v1.1


From e979e33c3972044e1be5e46552a02c3b9c0bc7a7 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Mon, 11 Jun 2012 17:09:41 +0200
Subject: mac80211: allow cancelling dependent ROCs

In my redesign of remain-on-channel I forgot
that an item could be cancelled when it's a
dependent item that is part of another item.
Allow cancelling such items by removing them
from the dependents list.

Note that when we cancel the main item, all
its dependents are also cancelled. It would
be possible to not do that, but would need
tricks to promote an item from dependent to
top-level and is tricky in the HW ROC case.

Reported-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/cfg.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 93d203c..9a97457 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -2305,6 +2305,21 @@ static int ieee80211_cancel_roc(struct ieee80211_local *local,
 
 	mutex_lock(&local->mtx);
 	list_for_each_entry_safe(roc, tmp, &local->roc_list, list) {
+		struct ieee80211_roc_work *dep, *tmp2;
+
+		list_for_each_entry_safe(dep, tmp2, &roc->dependents, list) {
+			if (!mgmt_tx && (unsigned long)dep != cookie)
+				continue;
+			else if (mgmt_tx && dep->mgmt_tx_cookie != cookie)
+				continue;
+			/* found dependent item -- just remove it */
+			list_del(&dep->list);
+			mutex_unlock(&local->mtx);
+
+			ieee80211_roc_notify_destroy(dep);
+			return 0;
+		}
+
 		if (!mgmt_tx && (unsigned long)roc != cookie)
 			continue;
 		else if (mgmt_tx && roc->mgmt_tx_cookie != cookie)
@@ -2319,6 +2334,13 @@ static int ieee80211_cancel_roc(struct ieee80211_local *local,
 		return -ENOENT;
 	}
 
+	/*
+	 * We found the item to cancel, so do that. Note that it
+	 * may have dependents, which we also cancel (and send
+	 * the expired signal for.) Not doing so would be quite
+	 * tricky here, but we may need to fix it later.
+	 */
+
 	if (local->ops->remain_on_channel) {
 		if (found->started) {
 			ret = drv_cancel_remain_on_channel(local);
-- 
cgit v1.1


From ac4d82fa01c194dba10b9a7c35449ba36eb642fc Mon Sep 17 00:00:00 2001
From: Pontus Fuchs <pontus.fuchs@gmail.com>
Date: Tue, 12 Jun 2012 14:13:19 +0200
Subject: mac80211: Disallow changing chan type on monitor when CHAN_MODE_FIXED

If you add a monitor interface in parallel to a normal interface
mac80211 will let you to change the channel type on the monitor
interface even if you are connected. Add an explicit check to
disallow this.

Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com>
[fix typo in commit log, use sdata instead of netdev]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/cfg.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 9a97457..cd8b1fb 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -689,7 +689,8 @@ static int ieee80211_set_channel(struct wiphy *wiphy,
 	case CHAN_MODE_HOPPING:
 		return -EBUSY;
 	case CHAN_MODE_FIXED:
-		if (local->oper_channel != chan)
+		if (local->oper_channel != chan ||
+		    (!sdata && local->_oper_channel_type != channel_type))
 			return -EBUSY;
 		if (!sdata && local->_oper_channel_type == channel_type)
 			return 0;
-- 
cgit v1.1


From 4a4ab0d7c9abe4e403bcea6ae2fc5d3f28a64a29 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 13 Jun 2012 11:17:11 +0200
Subject: nl80211: fix sched scan match attribute name

It should be NL80211_SCHED_SCAN_MATCH_ATTR_SSID as
documented, not NL80211_ATTR_SCHED_SCAN_MATCH_SSID.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/linux/nl80211.h | 5 ++++-
 net/wireless/nl80211.c  | 4 ++--
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index c61e1621..e7b1fc1 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -1963,7 +1963,7 @@ enum nl80211_reg_rule_attr {
 enum nl80211_sched_scan_match_attr {
 	__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID,
 
-	NL80211_ATTR_SCHED_SCAN_MATCH_SSID,
+	NL80211_SCHED_SCAN_MATCH_ATTR_SSID,
 
 	/* keep last */
 	__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
@@ -1971,6 +1971,9 @@ enum nl80211_sched_scan_match_attr {
 		__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1
 };
 
+/* only for backward compatibility */
+#define NL80211_ATTR_SCHED_SCAN_MATCH_SSID NL80211_SCHED_SCAN_MATCH_ATTR_SSID
+
 /**
  * enum nl80211_reg_rule_flags - regulatory rule flags
  *
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index dd94ee5..7db0aee 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -250,7 +250,7 @@ nl80211_rekey_policy[NUM_NL80211_REKEY_DATA] = {
 
 static const struct nla_policy
 nl80211_match_policy[NL80211_SCHED_SCAN_MATCH_ATTR_MAX + 1] = {
-	[NL80211_ATTR_SCHED_SCAN_MATCH_SSID] = { .type = NLA_BINARY,
+	[NL80211_SCHED_SCAN_MATCH_ATTR_SSID] = { .type = NLA_BINARY,
 						 .len = IEEE80211_MAX_SSID_LEN },
 };
 
@@ -4253,7 +4253,7 @@ static int nl80211_start_sched_scan(struct sk_buff *skb,
 			nla_parse(tb, NL80211_SCHED_SCAN_MATCH_ATTR_MAX,
 				  nla_data(attr), nla_len(attr),
 				  nl80211_match_policy);
-			ssid = tb[NL80211_ATTR_SCHED_SCAN_MATCH_SSID];
+			ssid = tb[NL80211_SCHED_SCAN_MATCH_ATTR_SSID];
 			if (ssid) {
 				if (nla_len(ssid) > IEEE80211_MAX_SSID_LEN) {
 					err = -EINVAL;
-- 
cgit v1.1


From 73c3df3ba3f2d7fe3ea47f944282f3cda31c5505 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 13 Jun 2012 11:17:14 +0200
Subject: cfg80211/nl80211: fix kernel-doc

Add missing entries to nl80211.h and fix
the kernel-doc notation in cfg80211.h.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/linux/nl80211.h | 33 ++++++++++++++++++++++++++++-----
 include/net/cfg80211.h  |  8 ++++----
 2 files changed, 32 insertions(+), 9 deletions(-)

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index e7b1fc1..e4f41bd 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -277,6 +277,12 @@
  * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
  *	NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
  *
+ * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry, using %NL80211_ATTR_MAC
+ *	(for the BSSID) and %NL80211_ATTR_PMKID.
+ * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC
+ *	(for the BSSID) and %NL80211_ATTR_PMKID.
+ * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
+ *
  * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
  * 	has been changed and provides details of the request information
  * 	that caused the change such as who initiated the regulatory request
@@ -456,6 +462,10 @@
  *	the frame.
  * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for
  *	backward compatibility.
+ *
+ * @NL80211_CMD_SET_POWER_SAVE: Set powersave, using %NL80211_ATTR_PS_STATE
+ * @NL80211_CMD_GET_POWER_SAVE: Get powersave status in %NL80211_ATTR_PS_STATE
+ *
  * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command
  *	is used to configure connection quality monitoring notification trigger
  *	levels.
@@ -771,6 +781,13 @@ enum nl80211_commands {
  *	section 7.3.2.25.1, e.g. 0x000FAC04)
  * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
  *	CCMP keys, each six bytes in little endian
+ * @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key
+ * @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the
+ *	default management key
+ * @NL80211_ATTR_CIPHER_SUITES_PAIRWISE: For crypto settings for connect or
+ *	other commands, indicates which pairwise cipher suites are used
+ * @NL80211_ATTR_CIPHER_SUITE_GROUP: For crypto settings for connect or
+ *	other commands, indicates which group cipher suite is used
  *
  * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU
  * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing
@@ -1006,6 +1023,8 @@ enum nl80211_commands {
  * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
  *	acknowledged by the recipient.
  *
+ * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values.
+ *
  * @NL80211_ATTR_CQM: connection quality monitor configuration in a
  *	nested attribute with %NL80211_ATTR_CQM_* sub-attributes.
  *
@@ -1063,7 +1082,7 @@ enum nl80211_commands {
  *	flag isn't set, the frame will be rejected. This is also used as an
  *	nl80211 capability flag.
  *
- * @NL80211_ATTR_BSS_HTOPMODE: HT operation mode (u16)
+ * @NL80211_ATTR_BSS_HT_OPMODE: HT operation mode (u16)
  *
  * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags
  *	attributes, specifying what a key should be set as default as.
@@ -1087,10 +1106,10 @@ enum nl80211_commands {
  *	indicate which WoW triggers should be enabled. This is also
  *	used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN
  *	triggers.
-
+ *
  * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan
  *	cycles, in msecs.
-
+ *
  * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more
  *	sets of attributes to match during scheduled scans.  Only BSSs
  *	that match any of the sets will be reported.  These are
@@ -1117,7 +1136,7 @@ enum nl80211_commands {
  *	are managed in software: interfaces of these types aren't subject to
  *	any restrictions in their number or combinations.
  *
- * @%NL80211_ATTR_REKEY_DATA: nested attribute containing the information
+ * @NL80211_ATTR_REKEY_DATA: nested attribute containing the information
  *	necessary for GTK rekeying in the device, see &enum nl80211_rekey_data.
  *
  * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan,
@@ -1184,7 +1203,6 @@ enum nl80211_commands {
  * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from
  *	&enum nl80211_feature_flags and is advertised in wiphy information.
  * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe
- *
  *	requests while operating in AP-mode.
  *	This attribute holds a bitmap of the supported protocols for
  *	offloading (see &enum nl80211_probe_resp_offload_support_attr).
@@ -2507,6 +2525,11 @@ enum nl80211_band {
 	NL80211_BAND_5GHZ,
 };
 
+/**
+ * enum nl80211_ps_state - powersave state
+ * @NL80211_PS_DISABLED: powersave is disabled
+ * @NL80211_PS_ENABLED: powersave is enabled
+ */
 enum nl80211_ps_state {
 	NL80211_PS_DISABLED,
 	NL80211_PS_ENABLED,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 778e533..76d5472 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -627,10 +627,10 @@ struct sta_bss_parameters {
  * @llid: mesh local link id
  * @plid: mesh peer link id
  * @plink_state: mesh peer link state
- * @signal: the signal strength, type depends on the wiphy's signal_type
-	NOTE: For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
- * @signal_avg: avg signal strength, type depends on the wiphy's signal_type
-	NOTE: For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
+ * @signal: The signal strength, type depends on the wiphy's signal_type.
+ *	For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
+ * @signal_avg: Average signal strength, type depends on the wiphy's signal_type.
+ *	For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
  * @txrate: current unicast bitrate from this station
  * @rxrate: current unicast bitrate to this station
  * @rx_packets: packets received from this station
-- 
cgit v1.1


From 04414e2aa516c7af6aa316562e046c5aca025e33 Mon Sep 17 00:00:00 2001
From: Eyal Shapira <eyal@wizery.com>
Date: Mon, 11 Jun 2012 17:59:55 +0300
Subject: wlcore: avoid using NET_IP_ALIGN for RX alignment

NET_IP_ALIGN can be overriden on different architectures
and therefore cannot be used in the RX path to account
for the 2 bytes added for alignment (either by the FW
in the case of 18xx or by the host for 12xx).
Instead use an internal define.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/rx.c | 4 ++--
 drivers/net/wireless/ti/wlcore/rx.h | 6 ++++++
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/rx.c b/drivers/net/wireless/ti/wlcore/rx.c
index 78200dc..a1db4e0 100644
--- a/drivers/net/wireless/ti/wlcore/rx.c
+++ b/drivers/net/wireless/ti/wlcore/rx.c
@@ -127,7 +127,7 @@ static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length,
 	}
 
 	if (rx_align == WLCORE_RX_BUF_UNALIGNED)
-		reserved = NET_IP_ALIGN;
+		reserved = RX_BUF_ALIGN;
 
 	/* the data read starts with the descriptor */
 	desc = (struct wl1271_rx_descriptor *) data;
@@ -175,7 +175,7 @@ static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length,
 	 */
 	memcpy(buf, data + sizeof(*desc), pkt_data_len);
 	if (rx_align == WLCORE_RX_BUF_PADDED)
-		skb_pull(skb, NET_IP_ALIGN);
+		skb_pull(skb, RX_BUF_ALIGN);
 
 	*hlid = desc->hlid;
 
diff --git a/drivers/net/wireless/ti/wlcore/rx.h b/drivers/net/wireless/ti/wlcore/rx.h
index 9be7801..4324a42 100644
--- a/drivers/net/wireless/ti/wlcore/rx.h
+++ b/drivers/net/wireless/ti/wlcore/rx.h
@@ -103,6 +103,12 @@
 /* If set, the buffer was padded by the FW to be 4 bytes aligned */
 #define RX_BUF_PADDED_PAYLOAD        BIT(30)
 
+/*
+ * Account for the padding inserted by the FW in case of RX_ALIGNMENT
+ * or for fixing alignment in case the packet wasn't aligned.
+ */
+#define RX_BUF_ALIGN                 2
+
 /* Describes the alignment state of a Rx buffer */
 enum wl_rx_buf_align {
 	WLCORE_RX_BUF_ALIGNED,
-- 
cgit v1.1


From 8f1a8684a56b3640510c0610b5635f5a4fe366fd Mon Sep 17 00:00:00 2001
From: Eyal Shapira <eyal@wizery.com>
Date: Tue, 12 Jun 2012 12:39:55 +0300
Subject: wlcore: send EAPOLs with basic rate policy

EAPOLs are sent at high rates as they are considered
data packets. Some APs like Motorola Symbol AP7131 and AP650
don't respond well to these rates and don't respond with
EAPOL 3/4 consistently. When sending EAPOL 2/4 at 54Mbps
we've seen approx 30% success rate in getting EAPOL 3/4 response
while using 11Mbps we got 100% success.
To increase the chances of successful 4-Way handshake with
such APs, send EAPOLs with basic rate policy in order to avoid
high rates.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/tx.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c
index 6983e7a..8ee82b9 100644
--- a/drivers/net/wireless/ti/wlcore/tx.c
+++ b/drivers/net/wireless/ti/wlcore/tx.c
@@ -305,11 +305,15 @@ static void wl1271_tx_fill_hdr(struct wl1271 *wl, struct wl12xx_vif *wlvif,
 	if (is_dummy || !wlvif)
 		rate_idx = 0;
 	else if (wlvif->bss_type != BSS_TYPE_AP_BSS) {
-		/* if the packets are destined for AP (have a STA entry)
-		   send them with AP rate policies, otherwise use default
-		   basic rates */
+		/*
+		 * if the packets are destined for AP (have a STA entry)
+		 * send them with AP rate policies (EAPOLs are an exception),
+		 * otherwise use default basic rates
+		 */
 		if (control->flags & IEEE80211_TX_CTL_NO_CCK_RATE)
 			rate_idx = wlvif->sta.p2p_rate_idx;
+		else if (skb->protocol == cpu_to_be16(ETH_P_PAE))
+			rate_idx = wlvif->sta.basic_rate_idx;
 		else if (control->control.sta)
 			rate_idx = wlvif->sta.ap_rate_idx;
 		else
-- 
cgit v1.1


From 2812eef151de189567f421c2cb1397b58334d9bd Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Tue, 12 Jun 2012 12:45:27 +0300
Subject: wlcore: update basic rates on channel switch

On channel switch we have to update the basic rates, in
order to reflect possible band changes (otherwise, we
might start beaconing on 11a with the default rates
of 11g).

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 1156e3f..21e0547 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -2454,6 +2454,7 @@ static int wl12xx_config_vif(struct wl1271 *wl, struct wl12xx_vif *wlvif,
 		wlvif->channel_type = conf->channel_type;
 
 		if (is_ap) {
+			wl1271_set_band_rate(wl, wlvif);
 			ret = wl1271_init_ap_rates(wl, wlvif);
 			if (ret < 0)
 				wl1271_error("AP rate policy change failed %d",
-- 
cgit v1.1


From 05f48d45747e422dba0baaaf96ae2ea103791bce Mon Sep 17 00:00:00 2001
From: Yair Shapira <yair.shapira@ti.com>
Date: Wed, 13 Jun 2012 17:14:21 +0300
Subject: wlcore/wl12xx: add support for HP and SKW FEM radio manufacturers

Add support for HP (High Performance TQS fem type 3) and SKW
(fem type 2). This is done by increasing the number of FEM
manufacturers to 4.

Usually FEM parameters from ini file are read from nvs file and
passed to firmware using TEST_CMD_INI_FILE_RADIO_PARAM. Still,
because the nvs file has only place for 2 FEMs, we need to pass the
new FEM types information in one of the available entries.

This is done by mapping new fem types 2,3 to entry 0. This solution
works for manual FEM selection. AutoDetect-FEM still support only
fem types 0 and 1.

Signed-off-by: Yair Shapira <yair.shapira@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wl12xx/cmd.c | 16 ++++++++++------
 drivers/net/wireless/ti/wlcore/ini.h | 22 +++++++++++++++++-----
 2 files changed, 27 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/ti/wl12xx/cmd.c b/drivers/net/wireless/ti/wl12xx/cmd.c
index 50ba748..30be784 100644
--- a/drivers/net/wireless/ti/wl12xx/cmd.c
+++ b/drivers/net/wireless/ti/wl12xx/cmd.c
@@ -174,7 +174,7 @@ int wl1271_cmd_radio_parms(struct wl1271 *wl)
 	struct wl1271_nvs_file *nvs = (struct wl1271_nvs_file *)wl->nvs;
 	struct wl1271_radio_parms_cmd *radio_parms;
 	struct wl1271_ini_general_params *gp = &nvs->general_params;
-	int ret;
+	int ret, fem_idx;
 
 	if (!wl->nvs)
 		return -ENODEV;
@@ -185,11 +185,13 @@ int wl1271_cmd_radio_parms(struct wl1271 *wl)
 
 	radio_parms->test.id = TEST_CMD_INI_FILE_RADIO_PARAM;
 
+	fem_idx = WL12XX_FEM_TO_NVS_ENTRY(gp->tx_bip_fem_manufacturer);
+
 	/* 2.4GHz parameters */
 	memcpy(&radio_parms->static_params_2, &nvs->stat_radio_params_2,
 	       sizeof(struct wl1271_ini_band_params_2));
 	memcpy(&radio_parms->dyn_params_2,
-	       &nvs->dyn_radio_params_2[gp->tx_bip_fem_manufacturer].params,
+	       &nvs->dyn_radio_params_2[fem_idx].params,
 	       sizeof(struct wl1271_ini_fem_params_2));
 
 	/* 5GHz parameters */
@@ -197,7 +199,7 @@ int wl1271_cmd_radio_parms(struct wl1271 *wl)
 	       &nvs->stat_radio_params_5,
 	       sizeof(struct wl1271_ini_band_params_5));
 	memcpy(&radio_parms->dyn_params_5,
-	       &nvs->dyn_radio_params_5[gp->tx_bip_fem_manufacturer].params,
+	       &nvs->dyn_radio_params_5[fem_idx].params,
 	       sizeof(struct wl1271_ini_fem_params_5));
 
 	wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ",
@@ -216,7 +218,7 @@ int wl128x_cmd_radio_parms(struct wl1271 *wl)
 	struct wl128x_nvs_file *nvs = (struct wl128x_nvs_file *)wl->nvs;
 	struct wl128x_radio_parms_cmd *radio_parms;
 	struct wl128x_ini_general_params *gp = &nvs->general_params;
-	int ret;
+	int ret, fem_idx;
 
 	if (!wl->nvs)
 		return -ENODEV;
@@ -227,11 +229,13 @@ int wl128x_cmd_radio_parms(struct wl1271 *wl)
 
 	radio_parms->test.id = TEST_CMD_INI_FILE_RADIO_PARAM;
 
+	fem_idx = WL12XX_FEM_TO_NVS_ENTRY(gp->tx_bip_fem_manufacturer);
+
 	/* 2.4GHz parameters */
 	memcpy(&radio_parms->static_params_2, &nvs->stat_radio_params_2,
 	       sizeof(struct wl128x_ini_band_params_2));
 	memcpy(&radio_parms->dyn_params_2,
-	       &nvs->dyn_radio_params_2[gp->tx_bip_fem_manufacturer].params,
+	       &nvs->dyn_radio_params_2[fem_idx].params,
 	       sizeof(struct wl128x_ini_fem_params_2));
 
 	/* 5GHz parameters */
@@ -239,7 +243,7 @@ int wl128x_cmd_radio_parms(struct wl1271 *wl)
 	       &nvs->stat_radio_params_5,
 	       sizeof(struct wl128x_ini_band_params_5));
 	memcpy(&radio_parms->dyn_params_5,
-	       &nvs->dyn_radio_params_5[gp->tx_bip_fem_manufacturer].params,
+	       &nvs->dyn_radio_params_5[fem_idx].params,
 	       sizeof(struct wl128x_ini_fem_params_5));
 
 	radio_parms->fem_vendor_and_options = nvs->fem_vendor_and_options;
diff --git a/drivers/net/wireless/ti/wlcore/ini.h b/drivers/net/wireless/ti/wlcore/ini.h
index 4cf9ecc..d24fe3b 100644
--- a/drivers/net/wireless/ti/wlcore/ini.h
+++ b/drivers/net/wireless/ti/wlcore/ini.h
@@ -172,7 +172,19 @@ struct wl128x_ini_fem_params_5 {
 
 /* NVS data structure */
 #define WL1271_INI_NVS_SECTION_SIZE		     468
-#define WL1271_INI_FEM_MODULE_COUNT                  2
+
+/* We have four FEM module types: 0-RFMD, 1-TQS, 2-SKW, 3-TQS_HP */
+#define WL1271_INI_FEM_MODULE_COUNT                  4
+
+/*
+ * In NVS we only store two FEM module entries -
+ *	  FEM modules 0,2,3 are stored in entry 0
+ *	  FEM module 1 is stored in entry 1
+ */
+#define WL12XX_NVS_FEM_MODULE_COUNT                  2
+
+#define WL12XX_FEM_TO_NVS_ENTRY(ini_fem_module)      \
+	((ini_fem_module) == 1 ? 1 : 0)
 
 #define WL1271_INI_LEGACY_NVS_FILE_SIZE              800
 
@@ -188,13 +200,13 @@ struct wl1271_nvs_file {
 	struct {
 		struct wl1271_ini_fem_params_2 params;
 		u8 padding;
-	} dyn_radio_params_2[WL1271_INI_FEM_MODULE_COUNT];
+	} dyn_radio_params_2[WL12XX_NVS_FEM_MODULE_COUNT];
 	struct wl1271_ini_band_params_5 stat_radio_params_5;
 	u8 padding3;
 	struct {
 		struct wl1271_ini_fem_params_5 params;
 		u8 padding;
-	} dyn_radio_params_5[WL1271_INI_FEM_MODULE_COUNT];
+	} dyn_radio_params_5[WL12XX_NVS_FEM_MODULE_COUNT];
 } __packed;
 
 struct wl128x_nvs_file {
@@ -209,12 +221,12 @@ struct wl128x_nvs_file {
 	struct {
 		struct wl128x_ini_fem_params_2 params;
 		u8 padding;
-	} dyn_radio_params_2[WL1271_INI_FEM_MODULE_COUNT];
+	} dyn_radio_params_2[WL12XX_NVS_FEM_MODULE_COUNT];
 	struct wl128x_ini_band_params_5 stat_radio_params_5;
 	u8 padding3;
 	struct {
 		struct wl128x_ini_fem_params_5 params;
 		u8 padding;
-	} dyn_radio_params_5[WL1271_INI_FEM_MODULE_COUNT];
+	} dyn_radio_params_5[WL12XX_NVS_FEM_MODULE_COUNT];
 } __packed;
 #endif
-- 
cgit v1.1


From b0b09e312ad36993a9ae51993b73448c1e38fc14 Mon Sep 17 00:00:00 2001
From: Yair Shapira <yair.shapira@ti.com>
Date: Wed, 13 Jun 2012 17:14:22 +0300
Subject: wlcore: add print logs of radio_status in case of BIP calibration

FEM BIP calibration may fail with fw/phy radio status. In order to
recognize these failures a log is added to the calibration answer
(TEST_CMD_P2G_CAL)

Signed-off-by: Yair Shapira <yair.shapira@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/cmd.h      | 21 +++++++++++++++++++++
 drivers/net/wireless/ti/wlcore/testmode.c | 14 ++++++++++++++
 2 files changed, 35 insertions(+)

diff --git a/drivers/net/wireless/ti/wlcore/cmd.h b/drivers/net/wireless/ti/wlcore/cmd.h
index 85171f2..c8a6510 100644
--- a/drivers/net/wireless/ti/wlcore/cmd.h
+++ b/drivers/net/wireless/ti/wlcore/cmd.h
@@ -652,4 +652,25 @@ struct wl12xx_cmd_stop_channel_switch {
 	struct wl1271_cmd_header header;
 } __packed;
 
+/* Used to check radio status after calibration */
+#define MAX_TLV_LENGTH		500
+#define TEST_CMD_P2G_CAL	2	/* TX BiP */
+
+struct wl1271_cmd_cal_p2g {
+	struct wl1271_cmd_header header;
+
+	struct wl1271_cmd_test_header test;
+
+	__le32 ver;
+	__le16 len;
+	u8 buf[MAX_TLV_LENGTH];
+	u8 type;
+	u8 padding;
+
+	__le16 radio_status;
+
+	u8 sub_band_mask;
+	u8 padding2;
+} __packed;
+
 #endif /* __WL1271_CMD_H__ */
diff --git a/drivers/net/wireless/ti/wlcore/testmode.c b/drivers/net/wireless/ti/wlcore/testmode.c
index 0e59ea2..eeb339d 100644
--- a/drivers/net/wireless/ti/wlcore/testmode.c
+++ b/drivers/net/wireless/ti/wlcore/testmode.c
@@ -108,6 +108,20 @@ static int wl1271_tm_cmd_test(struct wl1271 *wl, struct nlattr *tb[])
 	}
 
 	if (answer) {
+		/* If we got bip calibration answer print radio status */
+		struct wl1271_cmd_cal_p2g *params =
+			(struct wl1271_cmd_cal_p2g *) buf;
+
+		s16 radio_status = (s16) le16_to_cpu(params->radio_status);
+
+		if (params->test.id == TEST_CMD_P2G_CAL &&
+		    radio_status < 0)
+			wl1271_warning("testmode cmd: radio status=%d",
+					radio_status);
+		else
+			wl1271_info("testmode cmd: radio status=%d",
+					radio_status);
+
 		len = nla_total_size(buf_len);
 		skb = cfg80211_testmode_alloc_reply_skb(wl->hw->wiphy, len);
 		if (!skb) {
-- 
cgit v1.1


From bcab320ba20edf166d82d42928401a0afe61e0c5 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Wed, 13 Jun 2012 20:29:16 +0300
Subject: wlcore: declare interface combinations

Advertise to the stack that the wlcore driver
supports multiple interfaces for a single device.
This is required in order to be able to run
multirole with mac80211.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Yoni Divinsky <yoni.divinsky@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/main.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 21e0547..8eefcd7 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -4977,6 +4977,29 @@ static void wl1271_unregister_hw(struct wl1271 *wl)
 
 }
 
+static const struct ieee80211_iface_limit wlcore_iface_limits[] = {
+	{
+		.max = 2,
+		.types = BIT(NL80211_IFTYPE_STATION),
+	},
+	{
+		.max = 1,
+		.types = BIT(NL80211_IFTYPE_AP) |
+			 BIT(NL80211_IFTYPE_P2P_GO) |
+			 BIT(NL80211_IFTYPE_P2P_CLIENT),
+	},
+};
+
+static const struct ieee80211_iface_combination
+wlcore_iface_combinations[] = {
+	{
+	  .num_different_channels = 1,
+	  .max_interfaces = 2,
+	  .limits = wlcore_iface_limits,
+	  .n_limits = ARRAY_SIZE(wlcore_iface_limits),
+	},
+};
+
 static int wl1271_init_ieee80211(struct wl1271 *wl)
 {
 	static const u32 cipher_suites[] = {
@@ -5070,6 +5093,11 @@ static int wl1271_init_ieee80211(struct wl1271 *wl)
 		NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 |
 		NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P;
 
+	/* allowed interface combinations */
+	wl->hw->wiphy->iface_combinations = wlcore_iface_combinations;
+	wl->hw->wiphy->n_iface_combinations =
+		ARRAY_SIZE(wlcore_iface_combinations);
+
 	SET_IEEE80211_DEV(wl->hw, wl->dev);
 
 	wl->hw->sta_data_size = sizeof(struct wl1271_station);
-- 
cgit v1.1


From ac1073a61d73b6277794d2efc872eb7e1b706b5c Mon Sep 17 00:00:00 2001
From: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Date: Thu, 14 Jun 2012 02:06:06 +0800
Subject: {nl,cfg,mac}80211: implement dot11MeshHWMProotInterval and
 dot11MeshHWMPactivePathToRootTimeout

Add the mesh configuration parameters dot11MeshHWMProotInterval
and dot11MeshHWMPactivePathToRootTimeout to be used by
proactive PREQ mechanism.

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
[line-break commit log]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/linux/nl80211.h       |  9 +++++++++
 include/net/cfg80211.h        |  9 +++++++++
 net/mac80211/cfg.c            |  6 ++++++
 net/mac80211/debugfs_netdev.c |  6 ++++++
 net/wireless/mesh.c           |  4 ++++
 net/wireless/nl80211.c        | 15 ++++++++++++++-
 6 files changed, 48 insertions(+), 1 deletion(-)

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index e4f41bd..6936fab 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -2185,6 +2185,13 @@ enum nl80211_mntr_flags {
  *
  * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
  *
+ * @NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT: The time (in TUs) for
+ *	which mesh STAs receiving a proactive PREQ shall consider the forwarding
+ *	information to the root mesh STA to be valid.
+ *
+ * @NL80211_MESHCONF_HWMP_ROOT_INTERVAL: The interval of time (in TUs) between
+ *	proactive PREQs are transmitted.
+ *
  * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
  */
 enum nl80211_meshconf_params {
@@ -2211,6 +2218,8 @@ enum nl80211_meshconf_params {
 	NL80211_MESHCONF_RSSI_THRESHOLD,
 	NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR,
 	NL80211_MESHCONF_HT_OPMODE,
+	NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT,
+	NL80211_MESHCONF_HWMP_ROOT_INTERVAL,
 
 	/* keep last */
 	__NL80211_MESHCONF_ATTR_AFTER_LAST,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 76d5472..e52b38d 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -842,6 +842,13 @@ struct bss_parameters {
  * @rssi_threshold: the threshold for average signal strength of candidate
  *	station to establish a peer link
  * @ht_opmode: mesh HT protection mode
+ *
+ * @dot11MeshHWMPactivePathToRootTimeout: The time (in TUs) for which mesh STAs
+ *	receiving a proactive PREQ shall consider the forwarding information to
+ *	the root mesh STA to be valid.
+ *
+ * @dot11MeshHWMProotInterval: The interval of time (in TUs) between proactive
+ *	PREQs are transmitted.
  */
 struct mesh_config {
 	u16 dot11MeshRetryTimeout;
@@ -866,6 +873,8 @@ struct mesh_config {
 	bool dot11MeshForwarding;
 	s32 rssi_threshold;
 	u16 ht_opmode;
+	u32 dot11MeshHWMPactivePathToRootTimeout;
+	u16 dot11MeshHWMProotInterval;
 };
 
 /**
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index cd8b1fb..d93cda1 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1590,6 +1590,12 @@ static int ieee80211_update_mesh_config(struct wiphy *wiphy,
 		sdata->vif.bss_conf.ht_operation_mode = nconf->ht_opmode;
 		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_HT);
 	}
+	if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, mask))
+		conf->dot11MeshHWMPactivePathToRootTimeout =
+			nconf->dot11MeshHWMPactivePathToRootTimeout;
+	if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ROOT_INTERVAL, mask))
+		conf->dot11MeshHWMProotInterval =
+			nconf->dot11MeshHWMProotInterval;
 	return 0;
 }
 
diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c
index c429417..a8cea70 100644
--- a/net/mac80211/debugfs_netdev.c
+++ b/net/mac80211/debugfs_netdev.c
@@ -510,6 +510,10 @@ IEEE80211_IF_FILE(dot11MeshHWMPRannInterval,
 IEEE80211_IF_FILE(dot11MeshForwarding, u.mesh.mshcfg.dot11MeshForwarding, DEC);
 IEEE80211_IF_FILE(rssi_threshold, u.mesh.mshcfg.rssi_threshold, DEC);
 IEEE80211_IF_FILE(ht_opmode, u.mesh.mshcfg.ht_opmode, DEC);
+IEEE80211_IF_FILE(dot11MeshHWMPactivePathToRootTimeout,
+		  u.mesh.mshcfg.dot11MeshHWMPactivePathToRootTimeout, DEC);
+IEEE80211_IF_FILE(dot11MeshHWMProotInterval,
+		  u.mesh.mshcfg.dot11MeshHWMProotInterval, DEC);
 #endif
 
 #define DEBUGFS_ADD_MODE(name, mode) \
@@ -611,6 +615,8 @@ static void add_mesh_config(struct ieee80211_sub_if_data *sdata)
 	MESHPARAMS_ADD(dot11MeshGateAnnouncementProtocol);
 	MESHPARAMS_ADD(rssi_threshold);
 	MESHPARAMS_ADD(ht_opmode);
+	MESHPARAMS_ADD(dot11MeshHWMPactivePathToRootTimeout);
+	MESHPARAMS_ADD(dot11MeshHWMProotInterval);
 #undef MESHPARAMS_ADD
 }
 #endif
diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c
index b44c736..2f141cf 100644
--- a/net/wireless/mesh.c
+++ b/net/wireless/mesh.c
@@ -14,6 +14,8 @@
 
 #define MESH_PATH_TIMEOUT	5000
 #define MESH_RANN_INTERVAL      5000
+#define MESH_PATH_TO_ROOT_TIMEOUT      6000
+#define MESH_ROOT_INTERVAL     5000
 
 /*
  * Minimum interval between two consecutive PREQs originated by the same
@@ -62,6 +64,8 @@ const struct mesh_config default_mesh_config = {
 	.dot11MeshForwarding = true,
 	.rssi_threshold = MESH_RSSI_THRESHOLD,
 	.ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED,
+	.dot11MeshHWMPactivePathToRootTimeout = MESH_PATH_TO_ROOT_TIMEOUT,
+	.dot11MeshHWMProotInterval = MESH_ROOT_INTERVAL,
 };
 
 const struct mesh_setup default_mesh_setup = {
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 7db0aee..f8930db 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -3469,7 +3469,11 @@ static int nl80211_get_mesh_config(struct sk_buff *skb,
 	    nla_put_u32(msg, NL80211_MESHCONF_RSSI_THRESHOLD,
 			cur_params.rssi_threshold) ||
 	    nla_put_u32(msg, NL80211_MESHCONF_HT_OPMODE,
-			cur_params.ht_opmode))
+			cur_params.ht_opmode) ||
+	    nla_put_u32(msg, NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT,
+			cur_params.dot11MeshHWMPactivePathToRootTimeout) ||
+	    nla_put_u16(msg, NL80211_MESHCONF_HWMP_ROOT_INTERVAL,
+			cur_params.dot11MeshHWMProotInterval))
 		goto nla_put_failure;
 	nla_nest_end(msg, pinfoattr);
 	genlmsg_end(msg, hdr);
@@ -3505,6 +3509,8 @@ static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_A
 	[NL80211_MESHCONF_FORWARDING] = { .type = NLA_U8 },
 	[NL80211_MESHCONF_RSSI_THRESHOLD] = { .type = NLA_U32 },
 	[NL80211_MESHCONF_HT_OPMODE] = { .type = NLA_U16 },
+	[NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT] = { .type = NLA_U32 },
+	[NL80211_MESHCONF_HWMP_ROOT_INTERVAL] = { .type = NLA_U16 },
 };
 
 static const struct nla_policy
@@ -3612,6 +3618,13 @@ do {\
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, ht_opmode,
 				  mask, NL80211_MESHCONF_HT_OPMODE,
 				  nla_get_u16);
+	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPactivePathToRootTimeout,
+				  mask,
+				  NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT,
+				  nla_get_u32);
+	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMProotInterval,
+				  mask, NL80211_MESHCONF_HWMP_ROOT_INTERVAL,
+				  nla_get_u16);
 	if (mask_out)
 		*mask_out = mask;
 
-- 
cgit v1.1


From a69cc44fe9ebb806c5f3f8bd83fb4a50ca63647b Mon Sep 17 00:00:00 2001
From: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Date: Thu, 14 Jun 2012 02:06:07 +0800
Subject: mac80211: implement the proactive PREQ generation

Generate the proactive PREQ element as defined in
Sec. 13.10.9.3 (Case C) of IEEE Std. 802.11-2012
based on the selection of dot11MeshHWMPRootMode as follow:
dot11MeshHWMPRootMode (2) is proactivePREQnoPREP
dot11MeshHWMPRootMode (3) is proactivePREQwithPREP

The proactive PREQ is generated based on the interval
defined by dot11MeshHWMProotInterval.

With this change, proactive RANN element is now generated
if the dot11MeshHWMPRootMode is set to (4) instead of (1).

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
[line-break commit log]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/linux/ieee80211.h | 42 ++++++++++++++++++++++++++++++++++++++++++
 net/mac80211/mesh.c       | 10 ++++++++--
 net/mac80211/mesh_hwmp.c  | 27 ++++++++++++++++++++++++---
 3 files changed, 74 insertions(+), 5 deletions(-)

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 98c86ff6..6e06011 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -568,6 +568,26 @@ struct ieee80211s_hdr {
 #define MESH_FLAGS_PS_DEEP	0x4
 
 /**
+ * enum ieee80211_preq_flags - mesh PREQ element flags
+ *
+ * @IEEE80211_PREQ_PROACTIVE_PREP_FLAG: proactive PREP subfield
+ */
+enum ieee80211_preq_flags {
+	IEEE80211_PREQ_PROACTIVE_PREP_FLAG	= 1<<2,
+};
+
+/**
+ * enum ieee80211_preq_target_flags - mesh PREQ element per target flags
+ *
+ * @IEEE80211_PREQ_TO_FLAG: target only subfield
+ * @IEEE80211_PREQ_USN_FLAG: unknown target HWMP sequence number subfield
+ */
+enum ieee80211_preq_target_flags {
+	IEEE80211_PREQ_TO_FLAG	= 1<<0,
+	IEEE80211_PREQ_USN_FLAG	= 1<<2,
+};
+
+/**
  * struct ieee80211_quiet_ie
  *
  * This structure refers to "Quiet information element"
@@ -1474,6 +1494,28 @@ enum {
 	IEEE80211_PATH_METRIC_VENDOR = 255,
 };
 
+/**
+ * enum ieee80211_root_mode_identifier - root mesh STA mode identifier
+ *
+ * These attribute are used by dot11MeshHWMPRootMode to set root mesh STA mode
+ *
+ * @IEEE80211_ROOTMODE_NO_ROOT: the mesh STA is not a root mesh STA (default)
+ * @IEEE80211_ROOTMODE_ROOT: the mesh STA is a root mesh STA if greater than
+ *	this value
+ * @IEEE80211_PROACTIVE_PREQ_NO_PREP: the mesh STA is a root mesh STA supports
+ *	the proactive PREQ with proactive PREP subfield set to 0
+ * @IEEE80211_PROACTIVE_PREQ_WITH_PREP: the mesh STA is a root mesh STA
+ *	supports the proactive PREQ with proactive PREP subfield set to 1
+ * @IEEE80211_PROACTIVE_RANN: the mesh STA is a root mesh STA supports
+ *	the proactive RANN
+ */
+enum ieee80211_root_mode_identifier {
+	IEEE80211_ROOTMODE_NO_ROOT = 0,
+	IEEE80211_ROOTMODE_ROOT = 1,
+	IEEE80211_PROACTIVE_PREQ_NO_PREP = 2,
+	IEEE80211_PROACTIVE_PREQ_WITH_PREP = 3,
+	IEEE80211_PROACTIVE_RANN = 4,
+};
 
 /*
  * IEEE 802.11-2007 7.3.2.9 Country information element
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 7cf1950..6bff3c4 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -541,11 +541,17 @@ static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata,
 static void ieee80211_mesh_rootpath(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+	u32 interval;
 
 	mesh_path_tx_root_frame(sdata);
+
+	if (ifmsh->mshcfg.dot11MeshHWMPRootMode == IEEE80211_PROACTIVE_RANN)
+		interval = ifmsh->mshcfg.dot11MeshHWMPRannInterval;
+	else
+		interval = ifmsh->mshcfg.dot11MeshHWMProotInterval;
+
 	mod_timer(&ifmsh->mesh_path_root_timer,
-		  round_jiffies(TU_TO_EXP_TIME(
-				  ifmsh->mshcfg.dot11MeshHWMPRannInterval)));
+		  round_jiffies(TU_TO_EXP_TIME(interval)));
 }
 
 #ifdef CONFIG_PM
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 9b6da2d..a6b08f5 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -1154,13 +1154,34 @@ mesh_path_tx_root_frame(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 	u32 interval = ifmsh->mshcfg.dot11MeshHWMPRannInterval;
-	u8 flags;
+	u8 flags, target_flags = 0;
 
 	flags = (ifmsh->mshcfg.dot11MeshGateAnnouncementProtocol)
 			? RANN_FLAG_IS_GATE : 0;
-	mesh_path_sel_frame_tx(MPATH_RANN, flags, sdata->vif.addr,
+
+	switch (ifmsh->mshcfg.dot11MeshHWMPRootMode) {
+	case IEEE80211_PROACTIVE_RANN:
+		mesh_path_sel_frame_tx(MPATH_RANN, flags, sdata->vif.addr,
 			       cpu_to_le32(++ifmsh->sn),
 			       0, NULL, 0, broadcast_addr,
-			       0, sdata->u.mesh.mshcfg.element_ttl,
+			       0, ifmsh->mshcfg.element_ttl,
 			       cpu_to_le32(interval), 0, 0, sdata);
+		break;
+	case IEEE80211_PROACTIVE_PREQ_WITH_PREP:
+		flags |= IEEE80211_PREQ_PROACTIVE_PREP_FLAG;
+	case IEEE80211_PROACTIVE_PREQ_NO_PREP:
+		interval = ifmsh->mshcfg.dot11MeshHWMPactivePathToRootTimeout;
+		target_flags |= IEEE80211_PREQ_TO_FLAG |
+				IEEE80211_PREQ_USN_FLAG;
+		mesh_path_sel_frame_tx(MPATH_PREQ, flags, sdata->vif.addr,
+				cpu_to_le32(++ifmsh->sn), target_flags,
+				(u8 *) broadcast_addr, 0, broadcast_addr,
+				0, ifmsh->mshcfg.element_ttl,
+				cpu_to_le32(interval),
+				0, cpu_to_le32(ifmsh->preq_id++), sdata);
+		break;
+	default:
+		mhwmp_dbg("Proactive mechanism not supported");
+		return;
+	}
 }
-- 
cgit v1.1


From c85251f8562095cd6fd63ae786354283c5318303 Mon Sep 17 00:00:00 2001
From: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
Date: Mon, 11 Jun 2012 13:36:12 -0700
Subject: ath6kl: fix fw capability parsing

This patch fixes a bug where no capabilites are parsed when the number
of firmware capability bits translate into fewer bytes than the host has
knowledge of. Instead just process number of capability bytes as
reported by the firmware.

Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/init.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c
index 62e25cc..f90b5db 100644
--- a/drivers/net/wireless/ath/ath6kl/init.c
+++ b/drivers/net/wireless/ath/ath6kl/init.c
@@ -1004,9 +1004,6 @@ static int ath6kl_fetch_fw_apin(struct ath6kl *ar, const char *name)
 				   ar->hw.reserved_ram_size);
 			break;
 		case ATH6KL_FW_IE_CAPABILITIES:
-			if (ie_len < DIV_ROUND_UP(ATH6KL_FW_CAPABILITY_MAX, 8))
-				break;
-
 			ath6kl_dbg(ATH6KL_DBG_BOOT,
 				   "found firmware capabilities ie (%zd B)\n",
 				   ie_len);
@@ -1015,6 +1012,9 @@ static int ath6kl_fetch_fw_apin(struct ath6kl *ar, const char *name)
 				index = i / 8;
 				bit = i % 8;
 
+				if (index == ie_len)
+					break;
+
 				if (data[index] & (1 << bit))
 					__set_bit(i, ar->fw_capabilities);
 			}
-- 
cgit v1.1


From 303e56f2d2868f1bcdd3b72c3296d02a7af28962 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Wed, 13 Jun 2012 19:37:06 +0300
Subject: iwlwifi: check that we have enough bits to track the TX queues

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/dvm/main.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c
index e620af3..bba3edf 100644
--- a/drivers/net/wireless/iwlwifi/dvm/main.c
+++ b/drivers/net/wireless/iwlwifi/dvm/main.c
@@ -1352,6 +1352,9 @@ static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans,
 		trans_cfg.queue_watchdog_timeout = IWL_WATCHDOG_DISABLED;
 	trans_cfg.command_names = iwl_dvm_cmd_strings;
 
+	WARN_ON(sizeof(priv->transport_queue_stop) * BITS_PER_BYTE <
+		priv->cfg->base_params->num_of_queues);
+
 	ucode_flags = fw->ucode_capa.flags;
 
 #ifndef CONFIG_IWLWIFI_P2P
-- 
cgit v1.1


From e9d364de1aed8f7e81b3e67fdf3015533bfc76b1 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Wed, 13 Jun 2012 14:16:40 +0300
Subject: iwlwifi: print the scratch of all the buffers stuck in a queue

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/pcie/trans.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index cc93516..c6f53af 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -296,6 +296,7 @@ static void iwlagn_free_dma_ptr(struct iwl_trans *trans,
 static void iwl_trans_pcie_queue_stuck_timer(unsigned long data)
 {
 	struct iwl_tx_queue *txq = (void *)data;
+	struct iwl_queue *q = &txq->q;
 	struct iwl_trans_pcie *trans_pcie = txq->trans_pcie;
 	struct iwl_trans *trans = iwl_trans_pcie_get_trans(trans_pcie);
 	u32 scd_sram_addr = trans_pcie->scd_base_addr +
@@ -346,6 +347,14 @@ static void iwl_trans_pcie_queue_stuck_timer(unsigned long data)
 			iwl_read_prph(trans, SCD_QUEUE_WRPTR(i)));
 	}
 
+	for (i = q->read_ptr; i != q->write_ptr;
+	     i = iwl_queue_inc_wrap(i, q->n_bd)) {
+		struct iwl_tx_cmd *tx_cmd =
+			(struct iwl_tx_cmd *)txq->entries[i].cmd->payload;
+		IWL_ERR(trans, "scratch %d = 0x%08x\n", i,
+			get_unaligned_le32(&tx_cmd->scratch));
+	}
+
 	iwl_op_mode_nic_error(trans->op_mode);
 }
 
-- 
cgit v1.1


From 901787c1674ee5d35c7c3713efbc009c72f43971 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Sun, 17 Jun 2012 16:00:22 +0300
Subject: iwlwifi: comment context requirements of the op_mode

A few op_mode of the op_mode API functions have requirements
on the running context of the caller. Document that.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-op-mode.h | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-op-mode.h b/drivers/net/wireless/iwlwifi/iwl-op-mode.h
index cd9ef11..64886f9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-op-mode.h
+++ b/drivers/net/wireless/iwlwifi/iwl-op-mode.h
@@ -111,22 +111,25 @@ struct iwl_cfg;
  *	May sleep
  * @rx: Rx notification to the op_mode. rxb is the Rx buffer itself. Cmd is the
  *	HCMD the this Rx responds to.
- *	Must be atomic.
+ *	Must be atomic and called with BH disabled.
  * @queue_full: notifies that a HW queue is full.
- *	Must be atomic
+ *	Must be atomic and called with BH disabled.
  * @queue_not_full: notifies that a HW queue is not full any more.
- *	Must be atomic
+ *	Must be atomic and called with BH disabled.
  * @hw_rf_kill:notifies of a change in the HW rf kill switch. True means that
  *	the radio is killed. Must be atomic.
  * @free_skb: allows the transport layer to free skbs that haven't been
  *	reclaimed by the op_mode. This can happen when the driver is freed and
  *	there are Tx packets pending in the transport layer.
  *	Must be atomic
- * @nic_error: error notification. Must be atomic
- * @cmd_queue_full: Called when the command queue gets full. Must be atomic.
+ * @nic_error: error notification. Must be atomic and must be called with BH
+ *	disabled.
+ * @cmd_queue_full: Called when the command queue gets full. Must be atomic and
+ *	called with BH disabled.
  * @nic_config: configure NIC, called before firmware is started.
  *	May sleep
- * @wimax_active: invoked when WiMax becomes active.  Must be atomic.
+ * @wimax_active: invoked when WiMax becomes active.  Must be atomic and called
+ *	with BH disabled.
  */
 struct iwl_op_mode_ops {
 	struct iwl_op_mode *(*start)(struct iwl_trans *trans,
@@ -165,7 +168,6 @@ struct iwl_op_mode {
 static inline void iwl_op_mode_stop(struct iwl_op_mode *op_mode)
 {
 	might_sleep();
-
 	op_mode->ops->stop(op_mode);
 }
 
-- 
cgit v1.1


From 24172f39b02e5fcd35a4f721bde5bc9b61534736 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Sun, 17 Jun 2012 16:04:25 +0300
Subject: iwlwifi: disable BH before the call to iwl_op_mode_nic_error

This is required by the op_mode API.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/pcie/trans.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index c6f53af..e20880a 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -2026,7 +2026,9 @@ static ssize_t iwl_dbgfs_fw_restart_write(struct file *file,
 	if (!trans->op_mode)
 		return -EAGAIN;
 
+	local_bh_disable();
 	iwl_op_mode_nic_error(trans->op_mode);
+	local_bh_enable();
 
 	return count;
 }
-- 
cgit v1.1


From 3595c003f962bcf089f83e8ea44fd3169ad60ca3 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Sun, 17 Jun 2012 16:12:42 +0300
Subject: iwlwifi: don't disable interrupt in iwl_abort_notification_waits

This is not needed since notif_wait_lock is never accessed
from IRQ.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-notif-wait.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-notif-wait.c b/drivers/net/wireless/iwlwifi/iwl-notif-wait.c
index 5cfed29..c61f207 100644
--- a/drivers/net/wireless/iwlwifi/iwl-notif-wait.c
+++ b/drivers/net/wireless/iwlwifi/iwl-notif-wait.c
@@ -121,13 +121,12 @@ EXPORT_SYMBOL_GPL(iwl_notification_wait_notify);
 
 void iwl_abort_notification_waits(struct iwl_notif_wait_data *notif_wait)
 {
-	unsigned long flags;
 	struct iwl_notification_wait *wait_entry;
 
-	spin_lock_irqsave(&notif_wait->notif_wait_lock, flags);
+	spin_lock(&notif_wait->notif_wait_lock);
 	list_for_each_entry(wait_entry, &notif_wait->notif_waits, list)
 		wait_entry->aborted = true;
-	spin_unlock_irqrestore(&notif_wait->notif_wait_lock, flags);
+	spin_unlock(&notif_wait->notif_wait_lock);
 
 	wake_up_all(&notif_wait->notif_waitq);
 }
-- 
cgit v1.1


From ae8baec22878be1f8d14b5bb00ac83f7954a9832 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Thu, 14 Jun 2012 12:27:56 +0300
Subject: iwlwifi: don't disable interrupt while starting tx

This is really not needed, we already have a lock inside
the accesses to the prph.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/pcie/trans.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index e20880a..42f369d 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -1046,15 +1046,12 @@ static int iwl_trans_pcie_start_fw(struct iwl_trans *trans,
 
 /*
  * Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask
- * must be called under the irq lock and with MAC access
  */
 static void iwl_trans_txq_set_sched(struct iwl_trans *trans, u32 mask)
 {
 	struct iwl_trans_pcie __maybe_unused *trans_pcie =
 		IWL_TRANS_GET_PCIE_TRANS(trans);
 
-	lockdep_assert_held(&trans_pcie->irq_lock);
-
 	iwl_write_prph(trans, SCD_TXFACT, mask);
 }
 
@@ -1062,12 +1059,9 @@ static void iwl_tx_start(struct iwl_trans *trans)
 {
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 	u32 a;
-	unsigned long flags;
 	int i, chan;
 	u32 reg_val;
 
-	spin_lock_irqsave(&trans_pcie->irq_lock, flags);
-
 	/* make sure all queue are not stopped/used */
 	memset(trans_pcie->queue_stopped, 0, sizeof(trans_pcie->queue_stopped));
 	memset(trans_pcie->queue_used, 0, sizeof(trans_pcie->queue_used));
@@ -1118,8 +1112,6 @@ static void iwl_tx_start(struct iwl_trans *trans)
 	iwl_write_direct32(trans, FH_TX_CHICKEN_BITS_REG,
 			   reg_val | FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN);
 
-	spin_unlock_irqrestore(&trans_pcie->irq_lock, flags);
-
 	/* Enable L1-Active */
 	iwl_clear_bits_prph(trans, APMG_PCIDEV_STT_REG,
 			    APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
-- 
cgit v1.1


From eb6476441bc2fecf6232a87d0313a85f8e3da7f4 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Thu, 14 Jun 2012 14:23:02 +0300
Subject: iwlwifi: protect use_ict with irq_lock

This variable was accessed without taking the lock.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/pcie/rx.c | 30 ++++++++++++++----------------
 1 file changed, 14 insertions(+), 16 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c
index d6860c0..be143eb 100644
--- a/drivers/net/wireless/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/rx.c
@@ -867,24 +867,23 @@ void iwl_disable_ict(struct iwl_trans *trans)
 	spin_unlock_irqrestore(&trans_pcie->irq_lock, flags);
 }
 
+/* legacy (non-ICT) ISR. Assumes that trans_pcie->irq_lock is held */
 static irqreturn_t iwl_isr(int irq, void *data)
 {
 	struct iwl_trans *trans = data;
-	struct iwl_trans_pcie *trans_pcie;
+	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 	u32 inta, inta_mask;
-	unsigned long flags;
 #ifdef CONFIG_IWLWIFI_DEBUG
 	u32 inta_fh;
 #endif
+
+	lockdep_assert_held(&trans_pcie->irq_lock);
+
 	if (!trans)
 		return IRQ_NONE;
 
 	trace_iwlwifi_dev_irq(trans->dev);
 
-	trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
-
-	spin_lock_irqsave(&trans_pcie->irq_lock, flags);
-
 	/* Disable (but don't clear!) interrupts here to avoid
 	 *    back-to-back ISRs and sporadic interrupts from our NIC.
 	 * If we have something to service, the tasklet will re-enable ints.
@@ -907,7 +906,7 @@ static irqreturn_t iwl_isr(int irq, void *data)
 		/* Hardware disappeared. It might have already raised
 		 * an interrupt */
 		IWL_WARN(trans, "HARDWARE GONE?? INTA == 0x%08x\n", inta);
-		goto unplugged;
+		return IRQ_HANDLED;
 	}
 
 #ifdef CONFIG_IWLWIFI_DEBUG
@@ -926,18 +925,13 @@ static irqreturn_t iwl_isr(int irq, void *data)
 		 !trans_pcie->inta)
 		iwl_enable_interrupts(trans);
 
- unplugged:
-	spin_unlock_irqrestore(&trans_pcie->irq_lock, flags);
-	return IRQ_HANDLED;
-
- none:
+none:
 	/* re-enable interrupts here since we don't have anything to service. */
 	/* only Re-enable if disabled by irq  and no schedules tasklet. */
 	if (test_bit(STATUS_INT_ENABLED, &trans_pcie->status) &&
 	    !trans_pcie->inta)
 		iwl_enable_interrupts(trans);
 
-	spin_unlock_irqrestore(&trans_pcie->irq_lock, flags);
 	return IRQ_NONE;
 }
 
@@ -963,15 +957,19 @@ irqreturn_t iwl_isr_ict(int irq, void *data)
 
 	trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 
+	spin_lock_irqsave(&trans_pcie->irq_lock, flags);
+
 	/* dram interrupt table not set yet,
 	 * use legacy interrupt.
 	 */
-	if (!trans_pcie->use_ict)
-		return iwl_isr(irq, data);
+	if (unlikely(!trans_pcie->use_ict)) {
+		irqreturn_t ret = iwl_isr(irq, data);
+		spin_unlock_irqrestore(&trans_pcie->irq_lock, flags);
+		return ret;
+	}
 
 	trace_iwlwifi_dev_irq(trans->dev);
 
-	spin_lock_irqsave(&trans_pcie->irq_lock, flags);
 
 	/* Disable (but don't clear!) interrupts here to avoid
 	 * back-to-back ISRs and sporadic interrupts from our NIC.
-- 
cgit v1.1


From dada03ca73b699337781ae36e1ce4c8fec2da40a Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Sun, 17 Jun 2012 15:42:37 +0300
Subject: iwlwifi: disable early power Off reset for all NICs

This feature needs to be disabled for all NICs.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/dvm/devices.c | 13 -------------
 drivers/net/wireless/iwlwifi/dvm/main.c    | 13 ++++++++++++-
 2 files changed, 12 insertions(+), 14 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/dvm/devices.c b/drivers/net/wireless/iwlwifi/dvm/devices.c
index 0521a6b..349c205 100644
--- a/drivers/net/wireless/iwlwifi/dvm/devices.c
+++ b/drivers/net/wireless/iwlwifi/dvm/devices.c
@@ -250,17 +250,6 @@ struct iwl_lib_ops iwl2030_lib = {
  */
 
 /* NIC configuration for 5000 series */
-static void iwl5000_nic_config(struct iwl_priv *priv)
-{
-	/* W/A : NIC is stuck in a reset state after Early PCIe power off
-	 * (PCIe power is lost before PERST# is asserted),
-	 * causing ME FW to lose ownership and not being able to obtain it back.
-	 */
-	iwl_set_bits_mask_prph(priv->trans, APMG_PS_CTRL_REG,
-				APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS,
-				~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS);
-}
-
 static const struct iwl_sensitivity_ranges iwl5000_sensitivity = {
 	.min_nrg_cck = 100,
 	.auto_corr_min_ofdm = 90,
@@ -433,14 +422,12 @@ static int iwl5000_hw_channel_switch(struct iwl_priv *priv,
 struct iwl_lib_ops iwl5000_lib = {
 	.set_hw_params = iwl5000_hw_set_hw_params,
 	.set_channel_switch = iwl5000_hw_channel_switch,
-	.nic_config = iwl5000_nic_config,
 	.temperature = iwlagn_temperature,
 };
 
 struct iwl_lib_ops iwl5150_lib = {
 	.set_hw_params = iwl5150_hw_set_hw_params,
 	.set_channel_switch = iwl5000_hw_channel_switch,
-	.nic_config = iwl5000_nic_config,
 	.temperature = iwl5150_temperature,
 };
 
diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c
index bba3edf..c642c21 100644
--- a/drivers/net/wireless/iwlwifi/dvm/main.c
+++ b/drivers/net/wireless/iwlwifi/dvm/main.c
@@ -51,11 +51,13 @@
 #include "iwl-op-mode.h"
 #include "iwl-drv.h"
 #include "iwl-modparams.h"
+#include "iwl-prph.h"
 
 #include "dev.h"
 #include "calib.h"
 #include "agn.h"
 
+
 /******************************************************************************
  *
  * module boiler plate
@@ -2076,7 +2078,16 @@ static void iwl_nic_config(struct iwl_op_mode *op_mode)
 		    CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
 		    CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
 
-	priv->lib->nic_config(priv);
+	/* W/A : NIC is stuck in a reset state after Early PCIe power off
+	 * (PCIe power is lost before PERST# is asserted),
+	 * causing ME FW to lose ownership and not being able to obtain it back.
+	 */
+	iwl_set_bits_mask_prph(priv->trans, APMG_PS_CTRL_REG,
+			       APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS,
+			       ~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS);
+
+	if (priv->lib->nic_config)
+		priv->lib->nic_config(priv);
 }
 
 static void iwl_wimax_active(struct iwl_op_mode *op_mode)
-- 
cgit v1.1


From 601968b3bb1176b4cee47faba2d7a104422de8e6 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Thu, 14 Jun 2012 21:22:17 +0200
Subject: iwlwifi: delay ROC if doing internal reset scan

When the device is doing an internal radio reset
scan, ROC can be rejected to the supplicant with
busy status which confuses it.

One option would be to queue the ROC and handle
it later, but since the radio reset scan is very
quick we can just wait for it to finish instead.

Also add a warning since we shouldn't run into
the case of having a scan active when requesting
a ROC in any other case since mac80211 will not
scan while ROC or ROC while scanning.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/dvm/mac80211.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c
index 9d23748..c577263 100644
--- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c
@@ -1036,8 +1036,18 @@ static int iwlagn_mac_remain_on_channel(struct ieee80211_hw *hw,
 	mutex_lock(&priv->mutex);
 
 	if (test_bit(STATUS_SCAN_HW, &priv->status)) {
-		err = -EBUSY;
-		goto out;
+		/* mac80211 should not scan while ROC or ROC while scanning */
+		if (WARN_ON_ONCE(priv->scan_type != IWL_SCAN_RADIO_RESET)) {
+			err = -EBUSY;
+			goto out;
+		}
+
+		iwl_scan_cancel_timeout(priv, 100);
+
+		if (test_bit(STATUS_SCAN_HW, &priv->status)) {
+			err = -EBUSY;
+			goto out;
+		}
 	}
 
 	priv->hw_roc_channel = channel;
-- 
cgit v1.1


From 3fbf4b71be81e6dd3d6bfbcdef9618628ee1bafe Mon Sep 17 00:00:00 2001
From: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Date: Sun, 17 Jun 2012 02:27:40 +0800
Subject: mac80211: implement the proactive PREP generation

Generate the proactive PREP element in Proactive PREQ mode as
defined in Sec. 13.10.10.3 (Case D) of IEEE Std. 802.11-2012.

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/mesh_hwmp.c | 38 +++++++++++++++++++++++++++++++++-----
 1 file changed, 33 insertions(+), 5 deletions(-)

diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index a6b08f5..35e3acb 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -516,10 +516,11 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata,
 	struct mesh_path *mpath = NULL;
 	u8 *target_addr, *orig_addr;
 	const u8 *da;
-	u8 target_flags, ttl;
-	u32 orig_sn, target_sn, lifetime;
+	u8 target_flags, ttl, flags;
+	u32 orig_sn, target_sn, lifetime, orig_metric;
 	bool reply = false;
 	bool forward = true;
+	bool root_is_gate;
 
 	/* Update target SN, if present */
 	target_addr = PREQ_IE_TARGET_ADDR(preq_elem);
@@ -527,6 +528,10 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata,
 	target_sn = PREQ_IE_TARGET_SN(preq_elem);
 	orig_sn = PREQ_IE_ORIG_SN(preq_elem);
 	target_flags = PREQ_IE_TARGET_F(preq_elem);
+	orig_metric = metric;
+	/* Proactive PREQ gate announcements */
+	flags = PREQ_IE_FLAGS(preq_elem);
+	root_is_gate = !!(flags & RANN_FLAG_IS_GATE);
 
 	mhwmp_dbg("received PREQ from %pM", orig_addr);
 
@@ -541,6 +546,22 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata,
 			target_sn = ++ifmsh->sn;
 			ifmsh->last_sn_update = jiffies;
 		}
+	} else if (is_broadcast_ether_addr(target_addr) &&
+		   (target_flags & IEEE80211_PREQ_TO_FLAG)) {
+		rcu_read_lock();
+		mpath = mesh_path_lookup(orig_addr, sdata);
+		if (mpath) {
+			if (flags & IEEE80211_PREQ_PROACTIVE_PREP_FLAG) {
+				reply = true;
+				target_addr = sdata->vif.addr;
+				target_sn = ++ifmsh->sn;
+				metric = 0;
+				ifmsh->last_sn_update = jiffies;
+			}
+			if (root_is_gate)
+				mesh_path_add_gate(mpath);
+		}
+		rcu_read_unlock();
 	} else {
 		rcu_read_lock();
 		mpath = mesh_path_lookup(target_addr, sdata);
@@ -573,13 +594,14 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata,
 				cpu_to_le32(target_sn), mgmt->sa, 0, ttl,
 				cpu_to_le32(lifetime), cpu_to_le32(metric),
 				0, sdata);
-		} else
+		} else {
 			ifmsh->mshstats.dropped_frames_ttl++;
+		}
 	}
 
 	if (forward && ifmsh->mshcfg.dot11MeshForwarding) {
 		u32 preq_id;
-		u8 hopcount, flags;
+		u8 hopcount;
 
 		ttl = PREQ_IE_TTL(preq_elem);
 		lifetime = PREQ_IE_LIFETIME(preq_elem);
@@ -589,11 +611,17 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata,
 		}
 		mhwmp_dbg("forwarding the PREQ from %pM", orig_addr);
 		--ttl;
-		flags = PREQ_IE_FLAGS(preq_elem);
 		preq_id = PREQ_IE_PREQ_ID(preq_elem);
 		hopcount = PREQ_IE_HOPCOUNT(preq_elem) + 1;
 		da = (mpath && mpath->is_root) ?
 			mpath->rann_snd_addr : broadcast_addr;
+
+		if (flags & IEEE80211_PREQ_PROACTIVE_PREP_FLAG) {
+			target_addr = PREQ_IE_TARGET_ADDR(preq_elem);
+			target_sn = PREQ_IE_TARGET_SN(preq_elem);
+			metric = orig_metric;
+		}
+
 		mesh_path_sel_frame_tx(MPATH_PREQ, flags, orig_addr,
 				cpu_to_le32(orig_sn), target_flags, target_addr,
 				cpu_to_le32(target_sn), da,
-- 
cgit v1.1


From dbb912cd4ce64e763c5610b49a85529d2634e9d8 Mon Sep 17 00:00:00 2001
From: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Date: Thu, 14 Jun 2012 02:06:09 +0800
Subject: mac80211: invoke the timer only with correct dot11MeshHWMPRootMode
 value

mesh_path_root_timer is invoked once the dot11MeshHWMPRootMode
is larger than 1. This patch also adds the backward compatible
to the previous setting on dot11MeshHWMPRootMode. If the user
configures as follow, it will still trigger the proactive RANN
with Gate Announcement.

iw mesh0 set mesh_param mesh_hwmp_rootmode 1
iw mesh0 set mesh_param mesh_gate_announcements 1

similar to the following setting:

iw mesh0 set mesh_param mesh_hwmp_rootmode 4
iw mesh0 set mesh_param mesh_gate_announcements 1

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
[line-break commit log]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/cfg.c  | 4 ++--
 net/mac80211/mesh.c | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index d93cda1..5bd316c 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1565,8 +1565,8 @@ static int ieee80211_update_mesh_config(struct wiphy *wiphy,
 		 * announcements, so require this ifmsh to also be a root node
 		 * */
 		if (nconf->dot11MeshGateAnnouncementProtocol &&
-		    !conf->dot11MeshHWMPRootMode) {
-			conf->dot11MeshHWMPRootMode = 1;
+		    !(conf->dot11MeshHWMPRootMode > IEEE80211_ROOTMODE_ROOT)) {
+			conf->dot11MeshHWMPRootMode = IEEE80211_PROACTIVE_RANN;
 			ieee80211_mesh_root_setup(ifmsh);
 		}
 		conf->dot11MeshGateAnnouncementProtocol =
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 6bff3c4..ae40a83 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -443,7 +443,7 @@ static void ieee80211_mesh_path_root_timer(unsigned long data)
 
 void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh)
 {
-	if (ifmsh->mshcfg.dot11MeshHWMPRootMode)
+	if (ifmsh->mshcfg.dot11MeshHWMPRootMode > IEEE80211_ROOTMODE_ROOT)
 		set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
 	else {
 		clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
-- 
cgit v1.1


From 728b19e5fb9bbebbd580784a092b786fe379ed8e Mon Sep 17 00:00:00 2001
From: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Date: Thu, 14 Jun 2012 02:06:10 +0800
Subject: {nl,cfg,mac}80211: implement dot11MeshHWMPconfirmationInterval

As defined in section 13.10.9.3 Case D (802.11-2012), this
control variable is used to limit the mesh STA to send only
one PREQ to a root mesh STA within this interval of time
(in TUs). The default value for this variable is set to
2000 TUs. However, for current implementation, the maximum
configurable of dot11MeshHWMPconfirmationInterval is
restricted by dot11MeshHWMPactivePathTimeout.

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
[line-break commit log]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/linux/nl80211.h       | 5 +++++
 include/net/cfg80211.h        | 4 ++++
 net/mac80211/cfg.c            | 3 +++
 net/mac80211/debugfs_netdev.c | 3 +++
 net/mac80211/mesh.h           | 2 ++
 net/mac80211/mesh_hwmp.c      | 7 ++++++-
 net/wireless/mesh.c           | 2 ++
 net/wireless/nl80211.c        | 9 ++++++++-
 8 files changed, 33 insertions(+), 2 deletions(-)

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 6936fab..b7c3b73 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -2192,6 +2192,10 @@ enum nl80211_mntr_flags {
  * @NL80211_MESHCONF_HWMP_ROOT_INTERVAL: The interval of time (in TUs) between
  *	proactive PREQs are transmitted.
  *
+ * @NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL: The minimum interval of time
+ *	(in TUs) during which a mesh STA can send only one Action frame
+ *	containing a PREQ element for root path confirmation.
+ *
  * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
  */
 enum nl80211_meshconf_params {
@@ -2220,6 +2224,7 @@ enum nl80211_meshconf_params {
 	NL80211_MESHCONF_HT_OPMODE,
 	NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT,
 	NL80211_MESHCONF_HWMP_ROOT_INTERVAL,
+	NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,
 
 	/* keep last */
 	__NL80211_MESHCONF_ATTR_AFTER_LAST,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index e52b38d..f0163a1 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -849,6 +849,9 @@ struct bss_parameters {
  *
  * @dot11MeshHWMProotInterval: The interval of time (in TUs) between proactive
  *	PREQs are transmitted.
+ * @dot11MeshHWMPconfirmationInterval: The minimum interval of time (in TUs)
+ *	during which a mesh STA can send only one Action frame containing
+ *	a PREQ element for root path confirmation.
  */
 struct mesh_config {
 	u16 dot11MeshRetryTimeout;
@@ -875,6 +878,7 @@ struct mesh_config {
 	u16 ht_opmode;
 	u32 dot11MeshHWMPactivePathToRootTimeout;
 	u16 dot11MeshHWMProotInterval;
+	u16 dot11MeshHWMPconfirmationInterval;
 };
 
 /**
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 5bd316c..6e25ac4 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1596,6 +1596,9 @@ static int ieee80211_update_mesh_config(struct wiphy *wiphy,
 	if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ROOT_INTERVAL, mask))
 		conf->dot11MeshHWMProotInterval =
 			nconf->dot11MeshHWMProotInterval;
+	if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, mask))
+		conf->dot11MeshHWMPconfirmationInterval =
+			nconf->dot11MeshHWMPconfirmationInterval;
 	return 0;
 }
 
diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c
index a8cea70..512c894 100644
--- a/net/mac80211/debugfs_netdev.c
+++ b/net/mac80211/debugfs_netdev.c
@@ -514,6 +514,8 @@ IEEE80211_IF_FILE(dot11MeshHWMPactivePathToRootTimeout,
 		  u.mesh.mshcfg.dot11MeshHWMPactivePathToRootTimeout, DEC);
 IEEE80211_IF_FILE(dot11MeshHWMProotInterval,
 		  u.mesh.mshcfg.dot11MeshHWMProotInterval, DEC);
+IEEE80211_IF_FILE(dot11MeshHWMPconfirmationInterval,
+		  u.mesh.mshcfg.dot11MeshHWMPconfirmationInterval, DEC);
 #endif
 
 #define DEBUGFS_ADD_MODE(name, mode) \
@@ -617,6 +619,7 @@ static void add_mesh_config(struct ieee80211_sub_if_data *sdata)
 	MESHPARAMS_ADD(ht_opmode);
 	MESHPARAMS_ADD(dot11MeshHWMPactivePathToRootTimeout);
 	MESHPARAMS_ADD(dot11MeshHWMProotInterval);
+	MESHPARAMS_ADD(dot11MeshHWMPconfirmationInterval);
 #undef MESHPARAMS_ADD
 }
 #endif
diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h
index c7400a2..faaa39b 100644
--- a/net/mac80211/mesh.h
+++ b/net/mac80211/mesh.h
@@ -104,6 +104,7 @@ enum mesh_deferred_task_flags {
  * an mpath to a hash bucket on a path table.
  * @rann_snd_addr: the RANN sender address
  * @rann_metric: the aggregated path metric towards the root node
+ * @last_preq_to_root: Timestamp of last PREQ sent to root
  * @is_root: the destination station of this path is a root node
  * @is_gate: the destination station of this path is a mesh gate
  *
@@ -131,6 +132,7 @@ struct mesh_path {
 	spinlock_t state_lock;
 	u8 rann_snd_addr[ETH_ALEN];
 	u32 rann_metric;
+	unsigned long last_preq_to_root;
 	bool is_root;
 	bool is_gate;
 };
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 35e3acb..bea5247 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -98,6 +98,8 @@ static inline u32 u16_field_get(u8 *preq_elem, int offset, bool ae)
 #define max_preq_retries(s) (s->u.mesh.mshcfg.dot11MeshHWMPmaxPREQretries)
 #define disc_timeout_jiff(s) \
 	msecs_to_jiffies(sdata->u.mesh.mshcfg.min_discovery_timeout)
+#define root_path_confirmation_jiffies(s) \
+	msecs_to_jiffies(sdata->u.mesh.mshcfg.dot11MeshHWMPconfirmationInterval)
 
 enum mpath_frame_type {
 	MPATH_PREQ = 0,
@@ -811,11 +813,14 @@ static void hwmp_rann_frame_process(struct ieee80211_sub_if_data *sdata,
 	}
 
 	if ((!(mpath->flags & (MESH_PATH_ACTIVE | MESH_PATH_RESOLVING)) ||
-	     time_after(jiffies, mpath->exp_time - 1*HZ)) &&
+	     (time_after(jiffies, mpath->last_preq_to_root +
+				  root_path_confirmation_jiffies(sdata)) ||
+	     time_before(jiffies, mpath->last_preq_to_root))) &&
 	     !(mpath->flags & MESH_PATH_FIXED)) {
 		mhwmp_dbg("%s time to refresh root mpath %pM", sdata->name,
 							       orig_addr);
 		mesh_queue_preq(mpath, PREQ_Q_F_START | PREQ_Q_F_REFRESH);
+		mpath->last_preq_to_root = jiffies;
 	}
 
 	if ((SN_LT(mpath->sn, orig_sn) || (mpath->sn == orig_sn &&
diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c
index 2f141cf..3b73b07 100644
--- a/net/wireless/mesh.c
+++ b/net/wireless/mesh.c
@@ -16,6 +16,7 @@
 #define MESH_RANN_INTERVAL      5000
 #define MESH_PATH_TO_ROOT_TIMEOUT      6000
 #define MESH_ROOT_INTERVAL     5000
+#define MESH_ROOT_CONFIRMATION_INTERVAL 2000
 
 /*
  * Minimum interval between two consecutive PREQs originated by the same
@@ -66,6 +67,7 @@ const struct mesh_config default_mesh_config = {
 	.ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED,
 	.dot11MeshHWMPactivePathToRootTimeout = MESH_PATH_TO_ROOT_TIMEOUT,
 	.dot11MeshHWMProotInterval = MESH_ROOT_INTERVAL,
+	.dot11MeshHWMPconfirmationInterval = MESH_ROOT_CONFIRMATION_INTERVAL,
 };
 
 const struct mesh_setup default_mesh_setup = {
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index f8930db..a363ca1 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -3473,7 +3473,9 @@ static int nl80211_get_mesh_config(struct sk_buff *skb,
 	    nla_put_u32(msg, NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT,
 			cur_params.dot11MeshHWMPactivePathToRootTimeout) ||
 	    nla_put_u16(msg, NL80211_MESHCONF_HWMP_ROOT_INTERVAL,
-			cur_params.dot11MeshHWMProotInterval))
+			cur_params.dot11MeshHWMProotInterval) ||
+	    nla_put_u16(msg, NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,
+			cur_params.dot11MeshHWMPconfirmationInterval))
 		goto nla_put_failure;
 	nla_nest_end(msg, pinfoattr);
 	genlmsg_end(msg, hdr);
@@ -3511,6 +3513,7 @@ static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_A
 	[NL80211_MESHCONF_HT_OPMODE] = { .type = NLA_U16 },
 	[NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT] = { .type = NLA_U32 },
 	[NL80211_MESHCONF_HWMP_ROOT_INTERVAL] = { .type = NLA_U16 },
+	[NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL] = { .type = NLA_U16 },
 };
 
 static const struct nla_policy
@@ -3625,6 +3628,10 @@ do {\
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMProotInterval,
 				  mask, NL80211_MESHCONF_HWMP_ROOT_INTERVAL,
 				  nla_get_u16);
+	FILL_IN_MESH_PARAM_IF_SET(tb, cfg,
+				  dot11MeshHWMPconfirmationInterval, mask,
+				  NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,
+				  nla_get_u16);
 	if (mask_out)
 		*mask_out = mask;
 
-- 
cgit v1.1


From 58886a9011f8eae705b9f585ec6c80b34f3c4e6c Mon Sep 17 00:00:00 2001
From: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Date: Fri, 15 Jun 2012 00:23:53 +0800
Subject: mac80211: fix the assignment of mesh element TTL

This patch fixes the wrong assignment of mesh element TTL.

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/cfg.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 6e25ac4..17162fc 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1530,7 +1530,7 @@ static int ieee80211_update_mesh_config(struct wiphy *wiphy,
 	if (_chg_mesh_attr(NL80211_MESHCONF_TTL, mask))
 		conf->dot11MeshTTL = nconf->dot11MeshTTL;
 	if (_chg_mesh_attr(NL80211_MESHCONF_ELEMENT_TTL, mask))
-		conf->dot11MeshTTL = nconf->element_ttl;
+		conf->element_ttl = nconf->element_ttl;
 	if (_chg_mesh_attr(NL80211_MESHCONF_AUTO_OPEN_PLINKS, mask))
 		conf->auto_open_plinks = nconf->auto_open_plinks;
 	if (_chg_mesh_attr(NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, mask))
-- 
cgit v1.1


From 04800ada2acc3a9ffc754c1d73576cef326f3311 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Wed, 6 Jun 2012 11:25:02 +0300
Subject: mac80211: stop Rx during HW reconfig

While HW reconfig is in progress, drop all incoming Rx. This prevents
incoming packets from changing the internal state of the driver or
calling callbacks of the low level driver while it is in inconsistent
state.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/ieee80211_i.h | 3 +++
 net/mac80211/main.c        | 7 +++++++
 net/mac80211/rx.c          | 4 ++++
 net/mac80211/util.c        | 3 +++
 4 files changed, 17 insertions(+)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index e6cbf5b..ddf768f 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -881,6 +881,9 @@ struct ieee80211_local {
 	/* device is started */
 	bool started;
 
+	/* device is during a HW reconfig */
+	bool in_reconfig;
+
 	/* wowlan is enabled -- don't reconfig on resume */
 	bool wowlan;
 
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index d81c178..976e413 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -345,6 +345,13 @@ void ieee80211_restart_hw(struct ieee80211_hw *hw)
 	ieee80211_stop_queues_by_reason(hw,
 		IEEE80211_QUEUE_STOP_REASON_SUSPEND);
 
+	/*
+	 * Stop all Rx during the reconfig. We don't want state changes
+	 * or driver callbacks while this is in progress.
+	 */
+	local->in_reconfig = true;
+	barrier();
+
 	schedule_work(&local->restart_work);
 }
 EXPORT_SYMBOL(ieee80211_restart_hw);
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 6fd2cb0..072e8f3 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -3027,6 +3027,10 @@ void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	if (unlikely(local->quiescing || local->suspended))
 		goto drop;
 
+	/* We might be during a HW reconfig, prevent Rx for the same reason */
+	if (unlikely(local->in_reconfig))
+		goto drop;
+
 	/*
 	 * The same happens when we're not even started,
 	 * but that's worth a warning.
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 1df4019..242ecde 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1411,6 +1411,9 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 		if (ieee80211_sdata_running(sdata))
 			ieee80211_enable_keys(sdata);
 
+	local->in_reconfig = false;
+	barrier();
+
  wake_up:
 	/*
 	 * Clear the WLAN_STA_BLOCK_BA flag so new aggregation
-- 
cgit v1.1


From d6a4ed6fe0a0d4790941e7f13e56630b8b9b053d Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 18 Jun 2012 10:43:50 +0300
Subject: mac80211: set only VO as a U-APSD enabled AC

Some APs experience problems when working with U-APSD. Decrease the
probability of that happening by using legacy mode for all ACs but VO.

The AP that caused us troubles was a Cisco 4410N. It ignores our
setting, and always treats non-VO ACs as legacy.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/ieee80211_i.h | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index ddf768f..34af2e5 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -55,11 +55,14 @@ struct ieee80211_local;
 #define TU_TO_JIFFIES(x)	(usecs_to_jiffies((x) * 1024))
 #define TU_TO_EXP_TIME(x)	(jiffies + TU_TO_JIFFIES(x))
 
+/*
+ * Some APs experience problems when working with U-APSD. Decrease the
+ * probability of that happening by using legacy mode for all ACs but VO.
+ * The AP that caused us trouble was a Cisco 4410N. It ignores our
+ * setting, and always treats non-VO ACs as legacy.
+ */
 #define IEEE80211_DEFAULT_UAPSD_QUEUES \
-	(IEEE80211_WMM_IE_STA_QOSINFO_AC_BK |	\
-	 IEEE80211_WMM_IE_STA_QOSINFO_AC_BE |	\
-	 IEEE80211_WMM_IE_STA_QOSINFO_AC_VI |	\
-	 IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
+	IEEE80211_WMM_IE_STA_QOSINFO_AC_VO
 
 #define IEEE80211_DEFAULT_MAX_SP_LEN		\
 	IEEE80211_WMM_IE_STA_QOSINFO_SP_ALL
-- 
cgit v1.1


From 7ebfa46973aa239f79fbd4651ddeed5c92df45b2 Mon Sep 17 00:00:00 2001
From: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Date: Fri, 15 Jun 2012 10:20:02 +0800
Subject: mac80211: fix and improve mesh RANN processing

This patch fixes the problem of dropping RANN element if the TTL
is 1. If the received RANN element TTL is 1 or greater than 1, the
RANN is processed. However, forwarding of received RANN element
with TTL 1 or less is prohibited according to the standard. This
is previously reported by Monthadar Al Jaberi.

Besides, this patch also avoid the processing of unicast PREQ
generation if the RANN element does not meet the acceptance
criteria mentioned in Sec. 13.10.12.4.2 of IEEE Std. 802.11-2012.

Reported-by: Monthadar Al Jaberi <monthadar@gmail.com>
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/mesh_hwmp.c | 43 +++++++++++++++++++++++++------------------
 1 file changed, 25 insertions(+), 18 deletions(-)

diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index bea5247..aed1821 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -771,11 +771,6 @@ static void hwmp_rann_frame_process(struct ieee80211_sub_if_data *sdata,
 	bool root_is_gate;
 
 	ttl = rann->rann_ttl;
-	if (ttl <= 1) {
-		ifmsh->mshstats.dropped_frames_ttl++;
-		return;
-	}
-	ttl--;
 	flags = rann->rann_flags;
 	root_is_gate = !!(flags & RANN_FLAG_IS_GATE);
 	orig_addr = rann->rann_addr;
@@ -812,37 +807,49 @@ static void hwmp_rann_frame_process(struct ieee80211_sub_if_data *sdata,
 		}
 	}
 
+	if (!(SN_LT(mpath->sn, orig_sn)) &&
+	    !(mpath->sn == orig_sn && metric < mpath->rann_metric)) {
+		rcu_read_unlock();
+		return;
+	}
+
 	if ((!(mpath->flags & (MESH_PATH_ACTIVE | MESH_PATH_RESOLVING)) ||
 	     (time_after(jiffies, mpath->last_preq_to_root +
 				  root_path_confirmation_jiffies(sdata)) ||
 	     time_before(jiffies, mpath->last_preq_to_root))) &&
-	     !(mpath->flags & MESH_PATH_FIXED)) {
+	     !(mpath->flags & MESH_PATH_FIXED) && (ttl != 0)) {
 		mhwmp_dbg("%s time to refresh root mpath %pM", sdata->name,
 							       orig_addr);
 		mesh_queue_preq(mpath, PREQ_Q_F_START | PREQ_Q_F_REFRESH);
 		mpath->last_preq_to_root = jiffies;
 	}
 
-	if ((SN_LT(mpath->sn, orig_sn) || (mpath->sn == orig_sn &&
-	   metric < mpath->rann_metric)) && ifmsh->mshcfg.dot11MeshForwarding) {
+	mpath->sn = orig_sn;
+	mpath->rann_metric = metric + metric_txsta;
+	mpath->is_root = true;
+	/* Recording RANNs sender address to send individually
+	 * addressed PREQs destined for root mesh STA */
+	memcpy(mpath->rann_snd_addr, mgmt->sa, ETH_ALEN);
+
+	if (root_is_gate)
+		mesh_path_add_gate(mpath);
+
+	if (ttl <= 1) {
+		ifmsh->mshstats.dropped_frames_ttl++;
+		rcu_read_unlock();
+		return;
+	}
+	ttl--;
+
+	if (ifmsh->mshcfg.dot11MeshForwarding) {
 		mesh_path_sel_frame_tx(MPATH_RANN, flags, orig_addr,
 				       cpu_to_le32(orig_sn),
 				       0, NULL, 0, broadcast_addr,
 				       hopcount, ttl, cpu_to_le32(interval),
 				       cpu_to_le32(metric + metric_txsta),
 				       0, sdata);
-		mpath->sn = orig_sn;
-		mpath->rann_metric = metric + metric_txsta;
-		/* Recording RANNs sender address to send individually
-		 * addressed PREQs destined for root mesh STA */
-		memcpy(mpath->rann_snd_addr, mgmt->sa, ETH_ALEN);
 	}
 
-	mpath->is_root = true;
-
-	if (root_is_gate)
-		mesh_path_add_gate(mpath);
-
 	rcu_read_unlock();
 }
 
-- 
cgit v1.1


From 63d76dc0b97230e012a128a898f56a55e763d91a Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Tue, 19 Jun 2012 08:32:49 +0200
Subject: iwlwifi: fix 11n_disable EEPROM refactoring regression

My commit 26a7ca9a71a ("iwlwifi: refactor EEPROM reading/parsing")
broke the 11n_disable module parameter's BIT(0) to disable all HT
operation (using the other bits to disable aggregation only was
unaffected). Restore this by overriding the SKU when parsing the
EEPROM if the module parameter is set.

Reported-by: Matthijs Kooijman <matthijs@stdin.nl>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c b/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c
index c87a05c..f10170f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c
@@ -853,6 +853,9 @@ iwl_parse_eeprom_data(struct device *dev, const struct iwl_cfg *cfg,
 					     EEPROM_RADIO_CONFIG);
 	data->sku = iwl_eeprom_query16(eeprom, eeprom_size,
 				       EEPROM_SKU_CAP);
+	if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_ALL)
+		data->sku &= ~EEPROM_SKU_CAP_11N_ENABLE;
+
 	data->eeprom_version = iwl_eeprom_query16(eeprom, eeprom_size,
 						  EEPROM_VERSION);
 
-- 
cgit v1.1


From 0d4e07726ea468c0f9bb7f84b02a9f1bfd16b69e Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Mon, 18 Jun 2012 10:17:12 +0200
Subject: iwlwifi: use minimal time for radio reset scan

The effect of using a short single-channel scan
to reset the radio is that scanning a channel
that isn't in use needs to re-tune the radio.
This means that the dwell time is irrelevant,
so use a shorter time.

While at it, clean up the code for this a bit.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/dvm/scan.c | 41 +++++++++++++++------------------
 1 file changed, 19 insertions(+), 22 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/dvm/scan.c b/drivers/net/wireless/iwlwifi/dvm/scan.c
index 2f271c9..f5b1452 100644
--- a/drivers/net/wireless/iwlwifi/dvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/dvm/scan.c
@@ -51,6 +51,9 @@
 #define IWL_CHANNEL_TUNE_TIME       5
 #define MAX_SCAN_CHANNEL	    50
 
+/* For reset radio, need minimal dwell time only */
+#define IWL_RADIO_RESET_DWELL_TIME	5
+
 static int iwl_send_scan_abort(struct iwl_priv *priv)
 {
 	int ret;
@@ -469,45 +472,39 @@ static u8 iwl_get_single_channel_number(struct iwl_priv *priv,
 	return 0;
 }
 
-static int iwl_get_single_channel_for_scan(struct iwl_priv *priv,
-					   struct ieee80211_vif *vif,
-					   enum ieee80211_band band,
-					   struct iwl_scan_channel *scan_ch)
+static int iwl_get_channel_for_reset_scan(struct iwl_priv *priv,
+					  struct ieee80211_vif *vif,
+					  enum ieee80211_band band,
+					  struct iwl_scan_channel *scan_ch)
 {
 	const struct ieee80211_supported_band *sband;
-	u16 passive_dwell = 0;
-	u16 active_dwell = 0;
-	int added = 0;
-	u16 channel = 0;
+	u16 channel;
 
 	sband = iwl_get_hw_mode(priv, band);
 	if (!sband) {
 		IWL_ERR(priv, "invalid band\n");
-		return added;
+		return 0;
 	}
 
-	active_dwell = iwl_get_active_dwell_time(priv, band, 0);
-	passive_dwell = iwl_get_passive_dwell_time(priv, band);
-
-	if (passive_dwell <= active_dwell)
-		passive_dwell = active_dwell + 1;
-
 	channel = iwl_get_single_channel_number(priv, band);
 	if (channel) {
 		scan_ch->channel = cpu_to_le16(channel);
 		scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
-		scan_ch->active_dwell = cpu_to_le16(active_dwell);
-		scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+		scan_ch->active_dwell =
+			cpu_to_le16(IWL_RADIO_RESET_DWELL_TIME);
+		scan_ch->passive_dwell =
+			cpu_to_le16(IWL_RADIO_RESET_DWELL_TIME);
 		/* Set txpower levels to defaults */
 		scan_ch->dsp_atten = 110;
 		if (band == IEEE80211_BAND_5GHZ)
 			scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
 		else
 			scan_ch->tx_gain = ((1 << 5) | (5 << 3));
-		added++;
-	} else
-		IWL_ERR(priv, "no valid channel found\n");
-	return added;
+		return 1;
+	}
+
+	IWL_ERR(priv, "no valid channel found\n");
+	return 0;
 }
 
 static int iwl_get_channels_for_scan(struct iwl_priv *priv,
@@ -896,7 +893,7 @@ static int iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
 	switch (priv->scan_type) {
 	case IWL_SCAN_RADIO_RESET:
 		scan->channel_count =
-			iwl_get_single_channel_for_scan(priv, vif, band,
+			iwl_get_channel_for_reset_scan(priv, vif, band,
 				(void *)&scan->data[cmd_len]);
 		break;
 	case IWL_SCAN_NORMAL:
-- 
cgit v1.1


From 8d40f4eebf43bd73aa7c6e06665fd7a26012f9c9 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Tue, 19 Jun 2012 08:42:08 +0200
Subject: iwlwifi: remove sku field from hw_params

Now that the eeprom parsing code overrides the sku
field directly with 11n_disable parameters, there's
no longer a need to keep a copy of this field.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/dvm/dev.h      |  2 --
 drivers/net/wireless/iwlwifi/dvm/lib.c      |  2 +-
 drivers/net/wireless/iwlwifi/dvm/mac80211.c |  4 ++--
 drivers/net/wireless/iwlwifi/dvm/main.c     | 13 +++++--------
 4 files changed, 8 insertions(+), 13 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/dvm/dev.h b/drivers/net/wireless/iwlwifi/dvm/dev.h
index 4620b65..54cf085 100644
--- a/drivers/net/wireless/iwlwifi/dvm/dev.h
+++ b/drivers/net/wireless/iwlwifi/dvm/dev.h
@@ -568,7 +568,6 @@ enum iwl_scan_type {
  *
  * @tx_chains_num: Number of TX chains
  * @rx_chains_num: Number of RX chains
- * @sku: sku read from EEPROM
  * @ct_kill_threshold: temperature threshold - in hw dependent unit
  * @ct_kill_exit_threshold: when to reeable the device - in hw dependent unit
  *	relevant for 1000, 6000 and up
@@ -579,7 +578,6 @@ struct iwl_hw_params {
 	u8  tx_chains_num;
 	u8  rx_chains_num;
 	bool use_rts_for_aggregation;
-	u16 sku;
 	u32 ct_kill_threshold;
 	u32 ct_kill_exit_threshold;
 
diff --git a/drivers/net/wireless/iwlwifi/dvm/lib.c b/drivers/net/wireless/iwlwifi/dvm/lib.c
index 76f2592..207ae91 100644
--- a/drivers/net/wireless/iwlwifi/dvm/lib.c
+++ b/drivers/net/wireless/iwlwifi/dvm/lib.c
@@ -160,7 +160,7 @@ int iwlagn_txfifo_flush(struct iwl_priv *priv, u16 flush_control)
 				IWL_PAN_SCD_BK_MSK | IWL_PAN_SCD_MGMT_MSK |
 				IWL_PAN_SCD_MULTICAST_MSK;
 
-	if (priv->hw_params.sku & EEPROM_SKU_CAP_11N_ENABLE)
+	if (priv->eeprom_data->sku & EEPROM_SKU_CAP_11N_ENABLE)
 		flush_cmd.fifo_control |= IWL_AGG_TX_QUEUE_MSK;
 
 	IWL_DEBUG_INFO(priv, "fifo queue control: 0X%x\n",
diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c
index c577263..b581f03 100644
--- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c
@@ -164,7 +164,7 @@ int iwlagn_mac_setup_register(struct iwl_priv *priv,
 	hw->max_tx_aggregation_subframes = LINK_QUAL_AGG_FRAME_LIMIT_DEF;
 	 */
 
-	if (priv->hw_params.sku & EEPROM_SKU_CAP_11N_ENABLE)
+	if (priv->eeprom_data->sku & EEPROM_SKU_CAP_11N_ENABLE)
 		hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS |
 			     IEEE80211_HW_SUPPORTS_STATIC_SMPS;
 
@@ -649,7 +649,7 @@ static int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw,
 	IWL_DEBUG_HT(priv, "A-MPDU action on addr %pM tid %d\n",
 		     sta->addr, tid);
 
-	if (!(priv->hw_params.sku & EEPROM_SKU_CAP_11N_ENABLE))
+	if (!(priv->eeprom_data->sku & EEPROM_SKU_CAP_11N_ENABLE))
 		return -EACCES;
 
 	IWL_DEBUG_MAC80211(priv, "enter\n");
diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c
index c642c21..abfd791 100644
--- a/drivers/net/wireless/iwlwifi/dvm/main.c
+++ b/drivers/net/wireless/iwlwifi/dvm/main.c
@@ -1187,9 +1187,6 @@ static void iwl_set_hw_params(struct iwl_priv *priv)
 		priv->hw_params.use_rts_for_aggregation =
 			priv->cfg->ht_params->use_rts_for_aggregation;
 
-	if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_ALL)
-		priv->hw_params.sku &= ~EEPROM_SKU_CAP_11N_ENABLE;
-
 	/* Device-specific setup */
 	priv->lib->set_hw_params(priv);
 }
@@ -1234,20 +1231,20 @@ static int iwl_eeprom_init_hw_params(struct iwl_priv *priv)
 {
 	u16 radio_cfg;
 
-	priv->hw_params.sku = priv->eeprom_data->sku;
+	priv->eeprom_data->sku = priv->eeprom_data->sku;
 
-	if (priv->hw_params.sku & EEPROM_SKU_CAP_11N_ENABLE &&
+	if (priv->eeprom_data->sku & EEPROM_SKU_CAP_11N_ENABLE &&
 	    !priv->cfg->ht_params) {
 		IWL_ERR(priv, "Invalid 11n configuration\n");
 		return -EINVAL;
 	}
 
-	if (!priv->hw_params.sku) {
+	if (!priv->eeprom_data->sku) {
 		IWL_ERR(priv, "Invalid device sku\n");
 		return -EINVAL;
 	}
 
-	IWL_INFO(priv, "Device SKU: 0x%X\n", priv->hw_params.sku);
+	IWL_INFO(priv, "Device SKU: 0x%X\n", priv->eeprom_data->sku);
 
 	radio_cfg = priv->eeprom_data->radio_cfg;
 
@@ -1453,7 +1450,7 @@ static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans,
 	 ************************/
 	iwl_set_hw_params(priv);
 
-	if (!(priv->hw_params.sku & EEPROM_SKU_CAP_IPAN_ENABLE)) {
+	if (!(priv->eeprom_data->sku & EEPROM_SKU_CAP_IPAN_ENABLE)) {
 		IWL_DEBUG_INFO(priv, "Your EEPROM disabled PAN");
 		ucode_flags &= ~IWL_UCODE_TLV_FLAGS_PAN;
 		/*
-- 
cgit v1.1


From 559cef996d2e4c9b652a53bb3a53e5787e247f57 Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Date: Mon, 18 Jun 2012 19:03:52 +0530
Subject: mac80211: cleanup offchannel_ps_enable argument

The 'tell_ap' argument is always true. So that remove it
and simplify the function.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/offchannel.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c
index fcb01ee..febce7f 100644
--- a/net/mac80211/offchannel.c
+++ b/net/mac80211/offchannel.c
@@ -25,8 +25,7 @@
  * because we *may* be doing work on-operating channel, and want our
  * hardware unconditionally awake, but still let the AP send us normal frames.
  */
-static void ieee80211_offchannel_ps_enable(struct ieee80211_sub_if_data *sdata,
-					   bool tell_ap)
+static void ieee80211_offchannel_ps_enable(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
@@ -47,8 +46,8 @@ static void ieee80211_offchannel_ps_enable(struct ieee80211_sub_if_data *sdata,
 		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
 	}
 
-	if (tell_ap && (!local->offchannel_ps_enabled ||
-			!(local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)))
+	if (!local->offchannel_ps_enabled ||
+	    !(local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK))
 		/*
 		 * If power save was enabled, no need to send a nullfunc
 		 * frame because AP knows that we are sleeping. But if the
@@ -133,7 +132,7 @@ void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local,
 			if (offchannel_ps_enable &&
 			    (sdata->vif.type == NL80211_IFTYPE_STATION) &&
 			    sdata->u.mgd.associated)
-				ieee80211_offchannel_ps_enable(sdata, true);
+				ieee80211_offchannel_ps_enable(sdata);
 		}
 	}
 	mutex_unlock(&local->iflist_mtx);
-- 
cgit v1.1


From 6df653c71e8168e1df01118cc85cd84d0deeb583 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Mon, 18 Jun 2012 15:52:51 +0300
Subject: mac80211: initialize sta pointer to avoid false-positive warning

Some compilers (eg. gcc 4.4.1 for ARM) report a false positive warning
in mlme.c:

net/mac80211/mlme.c: In function 'ieee80211_prep_connection':
net/mac80211/mlme.c:3035: warning: 'sta' may be used uninitialized in this function

This is a false positive because the place where 'sta' is used is
inside an if with the same condition of where it is set:

[...]
        if (!have_sta) {
                sta = sta_info_alloc(sdata, cbss->bssid, GFP_KERNEL);
                if (!sta)
                        return -ENOMEM;
        }
[...]
        if (!have_sta) {
[...]
                sta->sta.supp_rates[cbss->channel->band] = rates;
[...]

For some reason the compiler doesn't understand this and warns.

While this is not a problem in the code itself, we can avoid polluting
the build logs with false positives by setting sta to NULL on
declaration and checking for sta instead of !have_sta in the second if.

Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/mlme.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 0f45d02..fa927c6 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -3012,7 +3012,7 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 	struct ieee80211_bss *bss = (void *)cbss->priv;
-	struct sta_info *sta;
+	struct sta_info *sta = NULL;
 	bool have_sta = false;
 	int err;
 	int ht_cfreq;
@@ -3102,7 +3102,7 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
 	local->oper_channel = cbss->channel;
 	ieee80211_hw_config(local, 0);
 
-	if (!have_sta) {
+	if (sta) {
 		u32 rates = 0, basic_rates = 0;
 		bool have_higher_than_11mbit;
 		int min_rate = INT_MAX, min_rate_index = -1;
-- 
cgit v1.1


From a9455408b09395ecf4008bd998516ce2e9551bbc Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 15 Jun 2012 13:32:49 +0200
Subject: cfg80211: make some functions static

Some of the functions to retrieve a device can
be static as they're used only in nl80211.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/wireless/core.c    | 63 --------------------------------------
 net/wireless/core.h    | 26 ----------------
 net/wireless/nl80211.c | 82 ++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 82 insertions(+), 89 deletions(-)

diff --git a/net/wireless/core.c b/net/wireless/core.c
index a87d435..907f62c 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -96,69 +96,6 @@ struct wiphy *wiphy_idx_to_wiphy(int wiphy_idx)
 	return &rdev->wiphy;
 }
 
-/* requires cfg80211_mutex to be held! */
-struct cfg80211_registered_device *
-__cfg80211_rdev_from_info(struct genl_info *info)
-{
-	int ifindex;
-	struct cfg80211_registered_device *bywiphyidx = NULL, *byifidx = NULL;
-	struct net_device *dev;
-	int err = -EINVAL;
-
-	assert_cfg80211_lock();
-
-	if (info->attrs[NL80211_ATTR_WIPHY]) {
-		bywiphyidx = cfg80211_rdev_by_wiphy_idx(
-				nla_get_u32(info->attrs[NL80211_ATTR_WIPHY]));
-		err = -ENODEV;
-	}
-
-	if (info->attrs[NL80211_ATTR_IFINDEX]) {
-		ifindex = nla_get_u32(info->attrs[NL80211_ATTR_IFINDEX]);
-		dev = dev_get_by_index(genl_info_net(info), ifindex);
-		if (dev) {
-			if (dev->ieee80211_ptr)
-				byifidx =
-					wiphy_to_dev(dev->ieee80211_ptr->wiphy);
-			dev_put(dev);
-		}
-		err = -ENODEV;
-	}
-
-	if (bywiphyidx && byifidx) {
-		if (bywiphyidx != byifidx)
-			return ERR_PTR(-EINVAL);
-		else
-			return bywiphyidx; /* == byifidx */
-	}
-	if (bywiphyidx)
-		return bywiphyidx;
-
-	if (byifidx)
-		return byifidx;
-
-	return ERR_PTR(err);
-}
-
-struct cfg80211_registered_device *
-cfg80211_get_dev_from_info(struct genl_info *info)
-{
-	struct cfg80211_registered_device *rdev;
-
-	mutex_lock(&cfg80211_mutex);
-	rdev = __cfg80211_rdev_from_info(info);
-
-	/* if it is not an error we grab the lock on
-	 * it to assure it won't be going away while
-	 * we operate on it */
-	if (!IS_ERR(rdev))
-		mutex_lock(&rdev->mtx);
-
-	mutex_unlock(&cfg80211_mutex);
-
-	return rdev;
-}
-
 struct cfg80211_registered_device *
 cfg80211_get_dev_from_ifindex(struct net *net, int ifindex)
 {
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 9348a47..609a579 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -159,32 +159,6 @@ static inline void cfg80211_unhold_bss(struct cfg80211_internal_bss *bss)
 struct cfg80211_registered_device *cfg80211_rdev_by_wiphy_idx(int wiphy_idx);
 int get_wiphy_idx(struct wiphy *wiphy);
 
-struct cfg80211_registered_device *
-__cfg80211_rdev_from_info(struct genl_info *info);
-
-/*
- * This function returns a pointer to the driver
- * that the genl_info item that is passed refers to.
- * If successful, it returns non-NULL and also locks
- * the driver's mutex!
- *
- * This means that you need to call cfg80211_unlock_rdev()
- * before being allowed to acquire &cfg80211_mutex!
- *
- * This is necessary because we need to lock the global
- * mutex to get an item off the list safely, and then
- * we lock the rdev mutex so it doesn't go away under us.
- *
- * We don't want to keep cfg80211_mutex locked
- * for all the time in order to allow requests on
- * other interfaces to go through at the same time.
- *
- * The result of this can be a PTR_ERR and hence must
- * be checked with IS_ERR() for errors.
- */
-extern struct cfg80211_registered_device *
-cfg80211_get_dev_from_info(struct genl_info *info);
-
 /* requires cfg80211_rdev_mutex to be held! */
 struct wiphy *wiphy_idx_to_wiphy(int wiphy_idx);
 
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index a363ca1..2d3541c 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -70,6 +70,88 @@ static int get_rdev_dev_by_ifindex(struct net *netns, struct nlattr **attrs,
 	return 0;
 }
 
+static struct cfg80211_registered_device *
+__cfg80211_rdev_from_info(struct genl_info *info)
+{
+	int ifindex;
+	struct cfg80211_registered_device *bywiphyidx = NULL, *byifidx = NULL;
+	struct net_device *dev;
+	int err = -EINVAL;
+
+	assert_cfg80211_lock();
+
+	if (info->attrs[NL80211_ATTR_WIPHY]) {
+		bywiphyidx = cfg80211_rdev_by_wiphy_idx(
+				nla_get_u32(info->attrs[NL80211_ATTR_WIPHY]));
+		err = -ENODEV;
+	}
+
+	if (info->attrs[NL80211_ATTR_IFINDEX]) {
+		ifindex = nla_get_u32(info->attrs[NL80211_ATTR_IFINDEX]);
+		dev = dev_get_by_index(genl_info_net(info), ifindex);
+		if (dev) {
+			if (dev->ieee80211_ptr)
+				byifidx =
+					wiphy_to_dev(dev->ieee80211_ptr->wiphy);
+			dev_put(dev);
+		}
+		err = -ENODEV;
+	}
+
+	if (bywiphyidx && byifidx) {
+		if (bywiphyidx != byifidx)
+			return ERR_PTR(-EINVAL);
+		else
+			return bywiphyidx; /* == byifidx */
+	}
+	if (bywiphyidx)
+		return bywiphyidx;
+
+	if (byifidx)
+		return byifidx;
+
+	return ERR_PTR(err);
+}
+
+/*
+ * This function returns a pointer to the driver
+ * that the genl_info item that is passed refers to.
+ * If successful, it returns non-NULL and also locks
+ * the driver's mutex!
+ *
+ * This means that you need to call cfg80211_unlock_rdev()
+ * before being allowed to acquire &cfg80211_mutex!
+ *
+ * This is necessary because we need to lock the global
+ * mutex to get an item off the list safely, and then
+ * we lock the rdev mutex so it doesn't go away under us.
+ *
+ * We don't want to keep cfg80211_mutex locked
+ * for all the time in order to allow requests on
+ * other interfaces to go through at the same time.
+ *
+ * The result of this can be a PTR_ERR and hence must
+ * be checked with IS_ERR() for errors.
+ */
+static struct cfg80211_registered_device *
+cfg80211_get_dev_from_info(struct genl_info *info)
+{
+	struct cfg80211_registered_device *rdev;
+
+	mutex_lock(&cfg80211_mutex);
+	rdev = __cfg80211_rdev_from_info(info);
+
+	/* if it is not an error we grab the lock on
+	 * it to assure it won't be going away while
+	 * we operate on it */
+	if (!IS_ERR(rdev))
+		mutex_lock(&rdev->mtx);
+
+	mutex_unlock(&cfg80211_mutex);
+
+	return rdev;
+}
+
 /* policy for the attributes */
 static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
 	[NL80211_ATTR_WIPHY] = { .type = NLA_U32 },
-- 
cgit v1.1


From 7fee4778bf56b0c5c86010d5b6f654177cc5da96 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 15 Jun 2012 14:09:58 +0200
Subject: nl80211: refactor __cfg80211_rdev_from_info

Refactor the function to make it easier to
extend.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/wireless/nl80211.c | 59 ++++++++++++++++++++++++++------------------------
 1 file changed, 31 insertions(+), 28 deletions(-)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 2d3541c..0ec9779 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -73,44 +73,47 @@ static int get_rdev_dev_by_ifindex(struct net *netns, struct nlattr **attrs,
 static struct cfg80211_registered_device *
 __cfg80211_rdev_from_info(struct genl_info *info)
 {
-	int ifindex;
-	struct cfg80211_registered_device *bywiphyidx = NULL, *byifidx = NULL;
-	struct net_device *dev;
-	int err = -EINVAL;
+	struct cfg80211_registered_device *rdev = NULL, *tmp;
+	struct net_device *netdev;
 
 	assert_cfg80211_lock();
 
-	if (info->attrs[NL80211_ATTR_WIPHY]) {
-		bywiphyidx = cfg80211_rdev_by_wiphy_idx(
+	if (!info->attrs[NL80211_ATTR_WIPHY] &&
+	    !info->attrs[NL80211_ATTR_IFINDEX])
+		return ERR_PTR(-EINVAL);
+
+	if (info->attrs[NL80211_ATTR_WIPHY])
+		rdev = cfg80211_rdev_by_wiphy_idx(
 				nla_get_u32(info->attrs[NL80211_ATTR_WIPHY]));
-		err = -ENODEV;
-	}
 
 	if (info->attrs[NL80211_ATTR_IFINDEX]) {
-		ifindex = nla_get_u32(info->attrs[NL80211_ATTR_IFINDEX]);
-		dev = dev_get_by_index(genl_info_net(info), ifindex);
-		if (dev) {
-			if (dev->ieee80211_ptr)
-				byifidx =
-					wiphy_to_dev(dev->ieee80211_ptr->wiphy);
-			dev_put(dev);
-		}
-		err = -ENODEV;
-	}
+		int ifindex = nla_get_u32(info->attrs[NL80211_ATTR_IFINDEX]);
+		netdev = dev_get_by_index(genl_info_net(info), ifindex);
+		if (netdev) {
+			if (netdev->ieee80211_ptr)
+				tmp = wiphy_to_dev(
+						netdev->ieee80211_ptr->wiphy);
+			else
+				tmp = NULL;
 
-	if (bywiphyidx && byifidx) {
-		if (bywiphyidx != byifidx)
-			return ERR_PTR(-EINVAL);
-		else
-			return bywiphyidx; /* == byifidx */
+			dev_put(netdev);
+
+			/* not wireless device -- return error */
+			if (!tmp)
+				return ERR_PTR(-EINVAL);
+
+			/* mismatch -- return error */
+			if (rdev && tmp != rdev)
+				return ERR_PTR(-EINVAL);
+
+			rdev = tmp;
+		}
 	}
-	if (bywiphyidx)
-		return bywiphyidx;
 
-	if (byifidx)
-		return byifidx;
+	if (rdev)
+		return rdev;
 
-	return ERR_PTR(err);
+	return ERR_PTR(-ENODEV);
 }
 
 /*
-- 
cgit v1.1


From 4f7eff10b20fc86f71f2db83e6b16cb5fbde8dbc Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 15 Jun 2012 14:14:22 +0200
Subject: nl80211: fix netns separation

There are currently a few ways to "escape"
the network namespace and access a wiphy
that belongs to another namespace. Add a
netns argument to the relevant functions
to fix this.

One remaining issue with testmode will be
fixed in a follow-up patch.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/wireless/nl80211.c | 21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 0ec9779..af23291 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -71,7 +71,7 @@ static int get_rdev_dev_by_ifindex(struct net *netns, struct nlattr **attrs,
 }
 
 static struct cfg80211_registered_device *
-__cfg80211_rdev_from_info(struct genl_info *info)
+__cfg80211_rdev_from_info(struct net *netns, struct genl_info *info)
 {
 	struct cfg80211_registered_device *rdev = NULL, *tmp;
 	struct net_device *netdev;
@@ -88,7 +88,7 @@ __cfg80211_rdev_from_info(struct genl_info *info)
 
 	if (info->attrs[NL80211_ATTR_IFINDEX]) {
 		int ifindex = nla_get_u32(info->attrs[NL80211_ATTR_IFINDEX]);
-		netdev = dev_get_by_index(genl_info_net(info), ifindex);
+		netdev = dev_get_by_index(netns, ifindex);
 		if (netdev) {
 			if (netdev->ieee80211_ptr)
 				tmp = wiphy_to_dev(
@@ -110,10 +110,13 @@ __cfg80211_rdev_from_info(struct genl_info *info)
 		}
 	}
 
-	if (rdev)
-		return rdev;
+	if (!rdev)
+		return ERR_PTR(-ENODEV);
 
-	return ERR_PTR(-ENODEV);
+	if (netns != wiphy_net(&rdev->wiphy))
+		return ERR_PTR(-ENODEV);
+
+	return rdev;
 }
 
 /*
@@ -137,12 +140,12 @@ __cfg80211_rdev_from_info(struct genl_info *info)
  * be checked with IS_ERR() for errors.
  */
 static struct cfg80211_registered_device *
-cfg80211_get_dev_from_info(struct genl_info *info)
+cfg80211_get_dev_from_info(struct net *netns, struct genl_info *info)
 {
 	struct cfg80211_registered_device *rdev;
 
 	mutex_lock(&cfg80211_mutex);
-	rdev = __cfg80211_rdev_from_info(info);
+	rdev = __cfg80211_rdev_from_info(netns, info);
 
 	/* if it is not an error we grab the lock on
 	 * it to assure it won't be going away while
@@ -1419,7 +1422,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 	}
 
 	if (!netdev) {
-		rdev = __cfg80211_rdev_from_info(info);
+		rdev = __cfg80211_rdev_from_info(genl_info_net(info), info);
 		if (IS_ERR(rdev)) {
 			mutex_unlock(&cfg80211_mutex);
 			return PTR_ERR(rdev);
@@ -6623,7 +6626,7 @@ static int nl80211_pre_doit(struct genl_ops *ops, struct sk_buff *skb,
 		rtnl_lock();
 
 	if (ops->internal_flags & NL80211_FLAG_NEED_WIPHY) {
-		rdev = cfg80211_get_dev_from_info(info);
+		rdev = cfg80211_get_dev_from_info(genl_info_net(info), info);
 		if (IS_ERR(rdev)) {
 			if (rtnl)
 				rtnl_unlock();
-- 
cgit v1.1


From 878d9ec7367816dc336b0c24e6256596559692b7 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 15 Jun 2012 14:18:32 +0200
Subject: nl80211: change __cfg80211_rdev_from_info

Change the function to __cfg80211_rdev_from_attrs
to take attributes instead of the info struct to
make it usable from dump callbacks for testmode.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/wireless/nl80211.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index af23291..7e94d4d 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -71,23 +71,23 @@ static int get_rdev_dev_by_ifindex(struct net *netns, struct nlattr **attrs,
 }
 
 static struct cfg80211_registered_device *
-__cfg80211_rdev_from_info(struct net *netns, struct genl_info *info)
+__cfg80211_rdev_from_attrs(struct net *netns, struct nlattr **attrs)
 {
 	struct cfg80211_registered_device *rdev = NULL, *tmp;
 	struct net_device *netdev;
 
 	assert_cfg80211_lock();
 
-	if (!info->attrs[NL80211_ATTR_WIPHY] &&
-	    !info->attrs[NL80211_ATTR_IFINDEX])
+	if (!attrs[NL80211_ATTR_WIPHY] &&
+	    !attrs[NL80211_ATTR_IFINDEX])
 		return ERR_PTR(-EINVAL);
 
-	if (info->attrs[NL80211_ATTR_WIPHY])
+	if (attrs[NL80211_ATTR_WIPHY])
 		rdev = cfg80211_rdev_by_wiphy_idx(
-				nla_get_u32(info->attrs[NL80211_ATTR_WIPHY]));
+				nla_get_u32(attrs[NL80211_ATTR_WIPHY]));
 
-	if (info->attrs[NL80211_ATTR_IFINDEX]) {
-		int ifindex = nla_get_u32(info->attrs[NL80211_ATTR_IFINDEX]);
+	if (attrs[NL80211_ATTR_IFINDEX]) {
+		int ifindex = nla_get_u32(attrs[NL80211_ATTR_IFINDEX]);
 		netdev = dev_get_by_index(netns, ifindex);
 		if (netdev) {
 			if (netdev->ieee80211_ptr)
@@ -145,7 +145,7 @@ cfg80211_get_dev_from_info(struct net *netns, struct genl_info *info)
 	struct cfg80211_registered_device *rdev;
 
 	mutex_lock(&cfg80211_mutex);
-	rdev = __cfg80211_rdev_from_info(netns, info);
+	rdev = __cfg80211_rdev_from_attrs(netns, info->attrs);
 
 	/* if it is not an error we grab the lock on
 	 * it to assure it won't be going away while
@@ -1422,7 +1422,8 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 	}
 
 	if (!netdev) {
-		rdev = __cfg80211_rdev_from_info(genl_info_net(info), info);
+		rdev = __cfg80211_rdev_from_attrs(genl_info_net(info),
+						  info->attrs);
 		if (IS_ERR(rdev)) {
 			mutex_unlock(&cfg80211_mutex);
 			return PTR_ERR(rdev);
-- 
cgit v1.1


From 2bd7e35da011f51d4fdb3b71f888c3a50194bfcd Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 15 Jun 2012 14:23:16 +0200
Subject: nl80211: use __cfg80211_rdev_from_attrs for testmode

To fix the testmode cross-namespace access problem,
use __cfg80211_rdev_from_attrs() to get the device
instead of open-coding similar functionality.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/wireless/nl80211.c | 23 ++++++++++-------------
 1 file changed, 10 insertions(+), 13 deletions(-)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 7e94d4d..06623d0 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -5230,21 +5230,18 @@ static int nl80211_testmode_dump(struct sk_buff *skb,
 				  nl80211_policy);
 		if (err)
 			return err;
-		if (nl80211_fam.attrbuf[NL80211_ATTR_WIPHY]) {
-			phy_idx = nla_get_u32(
-				nl80211_fam.attrbuf[NL80211_ATTR_WIPHY]);
-		} else {
-			struct net_device *netdev;
 
-			err = get_rdev_dev_by_ifindex(sock_net(skb->sk),
-						      nl80211_fam.attrbuf,
-						      &rdev, &netdev);
-			if (err)
-				return err;
-			dev_put(netdev);
-			phy_idx = rdev->wiphy_idx;
-			cfg80211_unlock_rdev(rdev);
+		mutex_lock(&cfg80211_mutex);
+		rdev = __cfg80211_rdev_from_attrs(sock_net(skb->sk),
+						  nl80211_fam.attrbuf);
+		if (IS_ERR(rdev)) {
+			mutex_unlock(&cfg80211_mutex);
+			return PTR_ERR(rdev);
 		}
+		phy_idx = rdev->wiphy_idx;
+		rdev = NULL;
+		mutex_unlock(&cfg80211_mutex);
+
 		if (nl80211_fam.attrbuf[NL80211_ATTR_TESTDATA])
 			cb->args[1] =
 				(long)nl80211_fam.attrbuf[NL80211_ATTR_TESTDATA];
-- 
cgit v1.1


From 46c1dd0c7fac54d3739d62b6362024d9b568c6de Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Tue, 19 Jun 2012 02:50:57 +0200
Subject: cfg80211: fix regression in multi-vif AP start

Commit "cfg80211: provide channel to start_ap function" assumes that the
channel is always passed to the NL80211_CMD_START_AP command, however
in case of multi-BSSID, hostapd only passes the channel for the first vif.
This makes starting beaconing on secondary vifs fail with -EINVAL.

Fix this by storing the channel provided to .start_ap in wdev->preset_chan
and picking the first AP vif's channel for secondary vifs if not provided.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/wireless/nl80211.c | 34 ++++++++++++++++++++++++++++++++--
 1 file changed, 32 insertions(+), 2 deletions(-)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 06623d0..888fadc 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2335,6 +2335,33 @@ static int nl80211_parse_beacon(struct genl_info *info,
 	return 0;
 }
 
+static bool nl80211_get_ap_channel(struct cfg80211_registered_device *rdev,
+				   struct cfg80211_ap_settings *params)
+{
+	struct wireless_dev *wdev;
+	bool ret = false;
+
+	mutex_lock(&rdev->devlist_mtx);
+
+	list_for_each_entry(wdev, &rdev->netdev_list, list) {
+		if (wdev->iftype != NL80211_IFTYPE_AP &&
+		    wdev->iftype != NL80211_IFTYPE_P2P_GO)
+			continue;
+
+		if (!wdev->preset_chan)
+			continue;
+
+		params->channel = wdev->preset_chan;
+		params->channel_type = wdev->preset_chantype;
+		ret = true;
+		break;
+	}
+
+	mutex_unlock(&rdev->devlist_mtx);
+
+	return ret;
+}
+
 static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
 {
 	struct cfg80211_registered_device *rdev = info->user_ptr[0];
@@ -2437,7 +2464,7 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
 	} else if (wdev->preset_chan) {
 		params.channel = wdev->preset_chan;
 		params.channel_type = wdev->preset_chantype;
-	} else
+	} else if (!nl80211_get_ap_channel(rdev, &params))
 		return -EINVAL;
 
 	if (!cfg80211_can_beacon_sec_chan(&rdev->wiphy, params.channel,
@@ -2445,8 +2472,11 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
 		return -EINVAL;
 
 	err = rdev->ops->start_ap(&rdev->wiphy, dev, &params);
-	if (!err)
+	if (!err) {
+		wdev->preset_chan = params.channel;
+		wdev->preset_chantype = params.channel_type;
 		wdev->beacon_interval = params.beacon_interval;
+	}
 	return err;
 }
 
-- 
cgit v1.1


From 50ae34a254ca5192e46503884ed0edd60795fe87 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Wed, 20 Jun 2012 17:23:24 +0300
Subject: mac80211: use the correct capability info in
 ieee80211_set_associated()

If an AP is beaconing with different capabilities than the one we get
in the associate response, we were still using the capabilities
received in the beacons.  One example is when the AP is beaconing with
the short slot bit set to zero and then we try to connect to it with
long slot.  In this case, we would keep using long slot until the next
beacon was received.

Fix this by using the correct capability value when calling
ieee80211_handle_bss_capability().  We were using cbss->capability,
but we should use the bss_conf->assoc_capability instead.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/mlme.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index fa927c6..94d0183 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1275,7 +1275,7 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
 
 	bss_info_changed |= BSS_CHANGED_BEACON_INT;
 	bss_info_changed |= ieee80211_handle_bss_capability(sdata,
-		cbss->capability, bss->has_erp_value, bss->erp_value);
+		bss_conf->assoc_capability, bss->has_erp_value, bss->erp_value);
 
 	sdata->u.mgd.beacon_timeout = usecs_to_jiffies(ieee80211_tu_to_usec(
 		IEEE80211_BEACON_LOSS_COUNT * bss_conf->beacon_int));
-- 
cgit v1.1


From 00e96decfd0b927f975c98340a5982c5039eeaae Mon Sep 17 00:00:00 2001
From: Yoni Divinsky <yoni.divinsky@ti.com>
Date: Wed, 20 Jun 2012 15:39:13 +0300
Subject: mac80211: save wmm_acm per sdata

Save and configure the wmm_acm per sdata, rather than
per hardware.

If wmm_acm is saved per hardware when running two
interfaces simultaneously on the same hardware one
interface's wmm policy will be affected by the other
interface.

Signed-off-by: Yoni Divinsky <yoni.divinsky@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/ieee80211_i.h |  4 +++-
 net/mac80211/iface.c       |  2 +-
 net/mac80211/mlme.c        | 10 +++++-----
 net/mac80211/rx.c          |  2 +-
 net/mac80211/wme.c         | 11 ++++++-----
 net/mac80211/wme.h         |  2 +-
 6 files changed, 17 insertions(+), 14 deletions(-)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 34af2e5..0024c32 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -680,6 +680,9 @@ struct ieee80211_sub_if_data {
 	/* TID bitmap for NoAck policy */
 	u16 noack_map;
 
+	/* bit field of ACM bits (BIT(802.1D tag)) */
+	u8 wmm_acm;
+
 	struct ieee80211_key __rcu *keys[NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS];
 	struct ieee80211_key __rcu *default_unicast_key;
 	struct ieee80211_key __rcu *default_multicast_key;
@@ -1025,7 +1028,6 @@ struct ieee80211_local {
 	int total_ps_buffered; /* total number of all buffered unicast and
 				* multicast packets for power saving stations
 				*/
-	unsigned int wmm_acm; /* bit field of ACM bits (BIT(802.1D tag)) */
 
 	bool pspolling;
 	bool offchannel_ps_enabled;
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 87aeb4f..728d3ea 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -808,7 +808,7 @@ static u16 ieee80211_monitor_select_queue(struct net_device *dev,
 
 	hdr = (void *)((u8 *)skb->data + le16_to_cpu(rtap->it_len));
 
-	return ieee80211_select_queue_80211(local, skb, hdr);
+	return ieee80211_select_queue_80211(sdata, skb, hdr);
 }
 
 static const struct net_device_ops ieee80211_monitorif_ops = {
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 94d0183..2b450f5 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1141,7 +1141,7 @@ static void ieee80211_sta_wmm_params(struct ieee80211_local *local,
 
 	memset(&params, 0, sizeof(params));
 
-	local->wmm_acm = 0;
+	sdata->wmm_acm = 0;
 	for (; left >= 4; left -= 4, pos += 4) {
 		int aci = (pos[0] >> 5) & 0x03;
 		int acm = (pos[0] >> 4) & 0x01;
@@ -1152,21 +1152,21 @@ static void ieee80211_sta_wmm_params(struct ieee80211_local *local,
 		case 1: /* AC_BK */
 			queue = 3;
 			if (acm)
-				local->wmm_acm |= BIT(1) | BIT(2); /* BK/- */
+				sdata->wmm_acm |= BIT(1) | BIT(2); /* BK/- */
 			if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK)
 				uapsd = true;
 			break;
 		case 2: /* AC_VI */
 			queue = 1;
 			if (acm)
-				local->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */
+				sdata->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */
 			if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI)
 				uapsd = true;
 			break;
 		case 3: /* AC_VO */
 			queue = 0;
 			if (acm)
-				local->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */
+				sdata->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */
 			if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
 				uapsd = true;
 			break;
@@ -1174,7 +1174,7 @@ static void ieee80211_sta_wmm_params(struct ieee80211_local *local,
 		default:
 			queue = 2;
 			if (acm)
-				local->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */
+				sdata->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */
 			if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
 				uapsd = true;
 			break;
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 072e8f3..446a327 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1935,7 +1935,7 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx)
 	    ether_addr_equal(sdata->vif.addr, hdr->addr3))
 		return RX_CONTINUE;
 
-	q = ieee80211_select_queue_80211(local, skb, hdr);
+	q = ieee80211_select_queue_80211(sdata, skb, hdr);
 	if (ieee80211_queue_stopped(&local->hw, q)) {
 		IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, dropped_frames_congestion);
 		return RX_DROP_MONITOR;
diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c
index c3d643a..cea06e9 100644
--- a/net/mac80211/wme.c
+++ b/net/mac80211/wme.c
@@ -52,11 +52,11 @@ static int wme_downgrade_ac(struct sk_buff *skb)
 	}
 }
 
-static u16 ieee80211_downgrade_queue(struct ieee80211_local *local,
+static u16 ieee80211_downgrade_queue(struct ieee80211_sub_if_data *sdata,
 				     struct sk_buff *skb)
 {
 	/* in case we are a client verify acm is not set for this ac */
-	while (unlikely(local->wmm_acm & BIT(skb->priority))) {
+	while (unlikely(sdata->wmm_acm & BIT(skb->priority))) {
 		if (wme_downgrade_ac(skb)) {
 			/*
 			 * This should not really happen. The AP has marked all
@@ -73,10 +73,11 @@ static u16 ieee80211_downgrade_queue(struct ieee80211_local *local,
 }
 
 /* Indicate which queue to use for this fully formed 802.11 frame */
-u16 ieee80211_select_queue_80211(struct ieee80211_local *local,
+u16 ieee80211_select_queue_80211(struct ieee80211_sub_if_data *sdata,
 				 struct sk_buff *skb,
 				 struct ieee80211_hdr *hdr)
 {
+	struct ieee80211_local *local = sdata->local;
 	u8 *p;
 
 	if (local->hw.queues < IEEE80211_NUM_ACS)
@@ -94,7 +95,7 @@ u16 ieee80211_select_queue_80211(struct ieee80211_local *local,
 	p = ieee80211_get_qos_ctl(hdr);
 	skb->priority = *p & IEEE80211_QOS_CTL_TAG1D_MASK;
 
-	return ieee80211_downgrade_queue(local, skb);
+	return ieee80211_downgrade_queue(sdata, skb);
 }
 
 /* Indicate which queue to use. */
@@ -156,7 +157,7 @@ u16 ieee80211_select_queue(struct ieee80211_sub_if_data *sdata,
 	 * data frame has */
 	skb->priority = cfg80211_classify8021d(skb);
 
-	return ieee80211_downgrade_queue(local, skb);
+	return ieee80211_downgrade_queue(sdata, skb);
 }
 
 void ieee80211_set_qos_hdr(struct ieee80211_sub_if_data *sdata,
diff --git a/net/mac80211/wme.h b/net/mac80211/wme.h
index ca80818..7fea4bb 100644
--- a/net/mac80211/wme.h
+++ b/net/mac80211/wme.h
@@ -15,7 +15,7 @@
 
 extern const int ieee802_1d_to_ac[8];
 
-u16 ieee80211_select_queue_80211(struct ieee80211_local *local,
+u16 ieee80211_select_queue_80211(struct ieee80211_sub_if_data *sdata,
 				 struct sk_buff *skb,
 				 struct ieee80211_hdr *hdr);
 u16 ieee80211_select_queue(struct ieee80211_sub_if_data *sdata,
-- 
cgit v1.1


From 9ea4fa158f3a038d5be82ccc7e142f198233f059 Mon Sep 17 00:00:00 2001
From: Eyal Shapira <eyal@wizery.com>
Date: Wed, 20 Jun 2012 13:10:14 +0300
Subject: mac80211: fix cleanup if driver suspend callback fails

In case the driver suspend callback fails, mac80211 is left
with stopped queues which prevents any further traffic as well
as all STAs are left marked with WLAN_STA_BLOCK_BA which will
cause any further ADDBA requests to be declined. Fix it by
undoing both before returning from __iee80211_suspend.

Reported-by: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/pm.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c
index 98c128b..5c572e7 100644
--- a/net/mac80211/pm.c
+++ b/net/mac80211/pm.c
@@ -78,6 +78,16 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan)
 		if (err < 0) {
 			local->quiescing = false;
 			local->wowlan = false;
+			if (hw->flags & IEEE80211_HW_AMPDU_AGGREGATION) {
+				mutex_lock(&local->sta_mtx);
+				list_for_each_entry(sta,
+						    &local->sta_list, list) {
+					clear_sta_flag(sta, WLAN_STA_BLOCK_BA);
+				}
+				mutex_unlock(&local->sta_mtx);
+			}
+			ieee80211_wake_queues_by_reason(hw,
+					IEEE80211_QUEUE_STOP_REASON_SUSPEND);
 			return err;
 		} else if (err > 0) {
 			WARN_ON(err != 1);
-- 
cgit v1.1


From 6abe0563224f8540c88e1d84d2bb394bd408c951 Mon Sep 17 00:00:00 2001
From: Will Hawkins <hawkinsw@opentechinstitute.org>
Date: Wed, 20 Jun 2012 11:51:14 -0400
Subject: mac80211: Track auth frame registrations on IBSS ifaces

Track userspace registrations for authentication
frames received on an IBSS interface. This field
will be used to decide whether or not to send
"open system" authentication frames when a new
station joins an adhoc network.

Signed-off-by: Will Hawkins <hawkinsw@opentechinstitute.org>
[redesign the code flow a bit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/cfg.c         | 28 +++++++++++++++++++++-------
 net/mac80211/ieee80211_i.h |  1 +
 2 files changed, 22 insertions(+), 7 deletions(-)

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 17162fc..a6abcd4 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -2516,16 +2516,30 @@ static void ieee80211_mgmt_frame_register(struct wiphy *wiphy,
 					  u16 frame_type, bool reg)
 {
 	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
-	if (frame_type != (IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_REQ))
-		return;
+	switch (frame_type) {
+	case IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH:
+		if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
+			struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
 
-	if (reg)
-		local->probe_req_reg++;
-	else
-		local->probe_req_reg--;
+			if (reg)
+				ifibss->auth_frame_registrations++;
+			else
+				ifibss->auth_frame_registrations--;
+		}
+		break;
+	case IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_REQ:
+		if (reg)
+			local->probe_req_reg++;
+		else
+			local->probe_req_reg--;
 
-	ieee80211_queue_work(&local->hw, &local->reconfig_filter);
+		ieee80211_queue_work(&local->hw, &local->reconfig_filter);
+		break;
+	default:
+		break;
+	}
 }
 
 static int ieee80211_set_antenna(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant)
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 0024c32..36ce2bb 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -511,6 +511,7 @@ struct ieee80211_if_ibss {
 	bool privacy;
 
 	bool control_port;
+	unsigned int auth_frame_registrations;
 
 	u8 bssid[ETH_ALEN] __aligned(2);
 	u8 ssid[IEEE80211_MAX_SSID_LEN];
-- 
cgit v1.1


From 452a6d22615bb8262a932b362f41fc5d89f03293 Mon Sep 17 00:00:00 2001
From: Will Hawkins <hawkinsw@opentechinstitute.org>
Date: Tue, 19 Jun 2012 17:59:13 -0400
Subject: mac80211: send auth in IBSS only if userspace isn't handling it

Check the auth frame registration count before sending
"open system" authentication messages when a new station
registers on a particular IBSS network. This stops us
from sending out multiple authentication messages with
different authentication algorithms.

Signed-off-by: Will Hawkins <hawkinsw@opentechinstitute.org>
[reword commit message a bit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/ibss.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index 725cb4b..ff46ff4 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -279,7 +279,7 @@ static struct sta_info *ieee80211_ibss_finish_sta(struct sta_info *sta,
 	/* If it fails, maybe we raced another insertion? */
 	if (sta_info_insert_rcu(sta))
 		return sta_info_get(sdata, addr);
-	if (auth) {
+	if (auth && !sdata->u.ibss.auth_frame_registrations) {
 		ibss_vdbg("TX Auth SA=%pM DA=%pM BSSID=%pM (auth_transaction=1)\n",
 			  sdata->vif.addr, sdata->u.ibss.bssid, addr);
 		ieee80211_send_auth(sdata, 1, WLAN_AUTH_OPEN, NULL, 0,
-- 
cgit v1.1


From 3bfda62c50b0a4b118dcfce36686508ca2892292 Mon Sep 17 00:00:00 2001
From: Will Hawkins <hawkinsw@opentechinstitute.org>
Date: Tue, 19 Jun 2012 17:59:14 -0400
Subject: mac80211: Allow userspace to register for auth frames in IBSS

Set the necessary flags to allow user space applications
to register for authentication frames on IBSS interfaces.
This is useful for situations where userspace applications
want to control key negotiation between stations.

Signed-off-by: Will Hawkins <hawkinsw@opentechinstitute.org>
[reword commit message a bit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 976e413..0b040fb 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -462,7 +462,9 @@ static const struct ieee80211_txrx_stypes
 ieee80211_default_mgmt_stypes[NUM_NL80211_IFTYPES] = {
 	[NL80211_IFTYPE_ADHOC] = {
 		.tx = 0xffff,
-		.rx = BIT(IEEE80211_STYPE_ACTION >> 4),
+		.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+			BIT(IEEE80211_STYPE_AUTH >> 4) |
+			BIT(IEEE80211_STYPE_DEAUTH >> 4),
 	},
 	[NL80211_IFTYPE_STATION] = {
 		.tx = 0xffff,
-- 
cgit v1.1


From 0f6b3f597daab2254614e2773e322e73fb1b6f4b Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 20 Jun 2012 20:11:33 +0200
Subject: mac80211: fix double-start of remain-on-channel

When a remain-on-channel item is deleted, we remove it
from the list and then start the next item. However,
if it wasn't actually the first item then calling
ieee80211_start_next_roc() is wrong as it will start
the first item -- even if that was already started.

Fix the two places that do this and add a warning to
prevent the problem from reoccurring.

Reported-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/cfg.c        | 3 ++-
 net/mac80211/offchannel.c | 6 +++++-
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index a6abcd4..03aff23 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -2362,7 +2362,8 @@ static int ieee80211_cancel_roc(struct ieee80211_local *local,
 
 		list_del(&found->list);
 
-		ieee80211_start_next_roc(local);
+		if (found->started)
+			ieee80211_start_next_roc(local);
 		mutex_unlock(&local->mtx);
 
 		ieee80211_roc_notify_destroy(found);
diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c
index febce7f..7f93626 100644
--- a/net/mac80211/offchannel.c
+++ b/net/mac80211/offchannel.c
@@ -262,6 +262,9 @@ void ieee80211_start_next_roc(struct ieee80211_local *local)
 	roc = list_first_entry(&local->roc_list, struct ieee80211_roc_work,
 			       list);
 
+	if (WARN_ON_ONCE(roc->started))
+		return;
+
 	if (local->ops->remain_on_channel) {
 		int ret, duration = roc->duration;
 
@@ -377,7 +380,8 @@ void ieee80211_sw_roc_work(struct work_struct *work)
 
 		ieee80211_recalc_idle(local);
 
-		ieee80211_start_next_roc(local);
+		if (roc->started)
+			ieee80211_start_next_roc(local);
 	}
 
  out_unlock:
-- 
cgit v1.1


From a89534edaaa7008992b878680490e9b02a665563 Mon Sep 17 00:00:00 2001
From: Woody Hung <Woody.Hung@mediatek.com>
Date: Wed, 13 Jun 2012 15:01:16 +0800
Subject: rt2x00 : RT3290 chip support v4

This patch support the new chipset rt3290 wifi implementation in rt2x00.
It initailize the related mac, bbp and rf register in startup phase.
And this patch modify the efuse read/write method for the different efuse data offset of rt3290.

Signed-off-by: Woody Hung <Woody.Hung@mediatek.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/Kconfig     |   8 +
 drivers/net/wireless/rt2x00/rt2800.h    | 173 +++++++++++++++-
 drivers/net/wireless/rt2x00/rt2800lib.c | 350 +++++++++++++++++++++++++++-----
 drivers/net/wireless/rt2x00/rt2800pci.c |  82 +++++++-
 drivers/net/wireless/rt2x00/rt2800pci.h |   1 +
 drivers/net/wireless/rt2x00/rt2x00.h    |   1 +
 drivers/net/wireless/rt2x00/rt2x00pci.c |   9 +
 7 files changed, 567 insertions(+), 57 deletions(-)

diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index 299c387..c7548da 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -99,6 +99,14 @@ config RT2800PCI_RT53XX
          rt2800pci driver.
          Supported chips: RT5390
 
+config RT2800PCI_RT3290
+       bool "rt2800pci - Include support for rt3290 devices (EXPERIMENTAL)"
+       depends on EXPERIMENTAL
+       default y
+       ---help---
+         This adds support for rt3290 wireless chipset family to the
+         rt2800pci driver.
+         Supported chips: RT3290
 endif
 
 config RT2500USB
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 1ca88cd..e252e9b 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -68,6 +68,7 @@
 #define RF3320				0x000b
 #define RF3322				0x000c
 #define RF3053				0x000d
+#define RF3290				0x3290
 #define RF5360				0x5360
 #define RF5370				0x5370
 #define RF5372				0x5372
@@ -117,6 +118,12 @@
  * Registers.
  */
 
+
+/*
+ * MAC_CSR0_3290: MAC_CSR0 for RT3290 to identity MAC version number.
+ */
+#define MAC_CSR0_3290				0x0000
+
 /*
  * E2PROM_CSR: PCI EEPROM control register.
  * RELOAD: Write 1 to reload eeprom content.
@@ -133,6 +140,150 @@
 #define E2PROM_CSR_RELOAD		FIELD32(0x00000080)
 
 /*
+ * CMB_CTRL_CFG
+ */
+#define CMB_CTRL		0x0020
+#define AUX_OPT_BIT0		FIELD32(0x00000001)
+#define AUX_OPT_BIT1		FIELD32(0x00000002)
+#define AUX_OPT_BIT2		FIELD32(0x00000004)
+#define AUX_OPT_BIT3		FIELD32(0x00000008)
+#define AUX_OPT_BIT4		FIELD32(0x00000010)
+#define AUX_OPT_BIT5		FIELD32(0x00000020)
+#define AUX_OPT_BIT6		FIELD32(0x00000040)
+#define AUX_OPT_BIT7		FIELD32(0x00000080)
+#define AUX_OPT_BIT8		FIELD32(0x00000100)
+#define AUX_OPT_BIT9		FIELD32(0x00000200)
+#define AUX_OPT_BIT10		FIELD32(0x00000400)
+#define AUX_OPT_BIT11		FIELD32(0x00000800)
+#define AUX_OPT_BIT12		FIELD32(0x00001000)
+#define AUX_OPT_BIT13		FIELD32(0x00002000)
+#define AUX_OPT_BIT14		FIELD32(0x00004000)
+#define AUX_OPT_BIT15		FIELD32(0x00008000)
+#define LDO25_LEVEL		FIELD32(0x00030000)
+#define LDO25_LARGEA		FIELD32(0x00040000)
+#define LDO25_FRC_ON		FIELD32(0x00080000)
+#define CMB_RSV			FIELD32(0x00300000)
+#define XTAL_RDY		FIELD32(0x00400000)
+#define PLL_LD			FIELD32(0x00800000)
+#define LDO_CORE_LEVEL		FIELD32(0x0F000000)
+#define LDO_BGSEL		FIELD32(0x30000000)
+#define LDO3_EN			FIELD32(0x40000000)
+#define LDO0_EN			FIELD32(0x80000000)
+
+/*
+ * EFUSE_CSR_3290: RT3290 EEPROM
+ */
+#define EFUSE_CTRL_3290			0x0024
+
+/*
+ * EFUSE_DATA3 of 3290
+ */
+#define EFUSE_DATA3_3290		0x0028
+
+/*
+ * EFUSE_DATA2 of 3290
+ */
+#define EFUSE_DATA2_3290		0x002c
+
+/*
+ * EFUSE_DATA1 of 3290
+ */
+#define EFUSE_DATA1_3290		0x0030
+
+/*
+ * EFUSE_DATA0 of 3290
+ */
+#define EFUSE_DATA0_3290		0x0034
+
+/*
+ * OSC_CTRL_CFG
+ * Ring oscillator configuration
+ */
+#define OSC_CTRL		0x0038
+#define OSC_REF_CYCLE		FIELD32(0x00001fff)
+#define OSC_RSV			FIELD32(0x0000e000)
+#define OSC_CAL_CNT		FIELD32(0x0fff0000)
+#define OSC_CAL_ACK		FIELD32(0x10000000)
+#define OSC_CLK_32K_VLD		FIELD32(0x20000000)
+#define OSC_CAL_REQ		FIELD32(0x40000000)
+#define OSC_ROSC_EN		FIELD32(0x80000000)
+
+/*
+ * COEX_CFG_0
+ */
+#define COEX_CFG0			0x0040
+#define COEX_CFG_ANT		FIELD32(0xff000000)
+/*
+ * COEX_CFG_1
+ */
+#define COEX_CFG1			0x0044
+
+/*
+ * COEX_CFG_2
+ */
+#define COEX_CFG2			0x0048
+#define BT_COEX_CFG1		FIELD32(0xff000000)
+#define BT_COEX_CFG0		FIELD32(0x00ff0000)
+#define WL_COEX_CFG1		FIELD32(0x0000ff00)
+#define WL_COEX_CFG0		FIELD32(0x000000ff)
+/*
+ * PLL_CTRL_CFG
+ * PLL configuration register
+ */
+#define PLL_CTRL		0x0050
+#define PLL_RESERVED_INPUT1	FIELD32(0x000000ff)
+#define PLL_RESERVED_INPUT2	FIELD32(0x0000ff00)
+#define PLL_CONTROL		FIELD32(0x00070000)
+#define PLL_LPF_R1		FIELD32(0x00080000)
+#define PLL_LPF_C1_CTRL	FIELD32(0x00300000)
+#define PLL_LPF_C2_CTRL	FIELD32(0x00c00000)
+#define PLL_CP_CURRENT_CTRL	FIELD32(0x03000000)
+#define PLL_PFD_DELAY_CTRL	FIELD32(0x0c000000)
+#define PLL_LOCK_CTRL		FIELD32(0x70000000)
+#define PLL_VBGBK_EN		FIELD32(0x80000000)
+
+
+/*
+ * WLAN_CTRL_CFG
+ * RT3290 wlan configuration
+ */
+#define WLAN_FUN_CTRL			0x0080
+#define WLAN_EN				FIELD32(0x00000001)
+#define WLAN_CLK_EN			FIELD32(0x00000002)
+#define WLAN_RSV1			FIELD32(0x00000004)
+#define WLAN_RESET			FIELD32(0x00000008)
+#define PCIE_APP0_CLK_REQ		FIELD32(0x00000010)
+#define FRC_WL_ANT_SET			FIELD32(0x00000020)
+#define INV_TR_SW0			FIELD32(0x00000040)
+#define WLAN_GPIO_IN_BIT0		FIELD32(0x00000100)
+#define WLAN_GPIO_IN_BIT1		FIELD32(0x00000200)
+#define WLAN_GPIO_IN_BIT2		FIELD32(0x00000400)
+#define WLAN_GPIO_IN_BIT3		FIELD32(0x00000800)
+#define WLAN_GPIO_IN_BIT4		FIELD32(0x00001000)
+#define WLAN_GPIO_IN_BIT5		FIELD32(0x00002000)
+#define WLAN_GPIO_IN_BIT6		FIELD32(0x00004000)
+#define WLAN_GPIO_IN_BIT7		FIELD32(0x00008000)
+#define WLAN_GPIO_IN_BIT_ALL		FIELD32(0x0000ff00)
+#define WLAN_GPIO_OUT_BIT0		FIELD32(0x00010000)
+#define WLAN_GPIO_OUT_BIT1		FIELD32(0x00020000)
+#define WLAN_GPIO_OUT_BIT2		FIELD32(0x00040000)
+#define WLAN_GPIO_OUT_BIT3		FIELD32(0x00050000)
+#define WLAN_GPIO_OUT_BIT4		FIELD32(0x00100000)
+#define WLAN_GPIO_OUT_BIT5		FIELD32(0x00200000)
+#define WLAN_GPIO_OUT_BIT6		FIELD32(0x00400000)
+#define WLAN_GPIO_OUT_BIT7		FIELD32(0x00800000)
+#define WLAN_GPIO_OUT_BIT_ALL		FIELD32(0x00ff0000)
+#define WLAN_GPIO_OUT_OE_BIT0		FIELD32(0x01000000)
+#define WLAN_GPIO_OUT_OE_BIT1		FIELD32(0x02000000)
+#define WLAN_GPIO_OUT_OE_BIT2		FIELD32(0x04000000)
+#define WLAN_GPIO_OUT_OE_BIT3		FIELD32(0x08000000)
+#define WLAN_GPIO_OUT_OE_BIT4		FIELD32(0x10000000)
+#define WLAN_GPIO_OUT_OE_BIT5		FIELD32(0x20000000)
+#define WLAN_GPIO_OUT_OE_BIT6		FIELD32(0x40000000)
+#define WLAN_GPIO_OUT_OE_BIT7		FIELD32(0x80000000)
+#define WLAN_GPIO_OUT_OE_BIT_ALL	FIELD32(0xff000000)
+
+/*
  * AUX_CTRL: Aux/PCI-E related configuration
  */
 #define AUX_CTRL			0x10c
@@ -1763,9 +1914,11 @@ struct mac_iveiv_entry {
 /*
  * BBP 3: RX Antenna
  */
-#define BBP3_RX_ADC				FIELD8(0x03)
+#define BBP3_RX_ADC			FIELD8(0x03)
 #define BBP3_RX_ANTENNA			FIELD8(0x18)
 #define BBP3_HT40_MINUS			FIELD8(0x20)
+#define BBP3_ADC_MODE_SWITCH		FIELD8(0x40)
+#define BBP3_ADC_INIT_MODE		FIELD8(0x80)
 
 /*
  * BBP 4: Bandwidth
@@ -1775,6 +1928,14 @@ struct mac_iveiv_entry {
 #define BBP4_MAC_IF_CTRL		FIELD8(0x40)
 
 /*
+ * BBP 47: Bandwidth
+ */
+#define BBP47_TSSI_REPORT_SEL		FIELD8(0x03)
+#define BBP47_TSSI_UPDATE_REQ		FIELD8(0x04)
+#define BBP47_TSSI_TSSI_MODE		FIELD8(0x18)
+#define BBP47_TSSI_ADC6			FIELD8(0x80)
+
+/*
  * BBP 109
  */
 #define BBP109_TX0_POWER		FIELD8(0x0f)
@@ -1917,6 +2078,16 @@ struct mac_iveiv_entry {
 #define RFCSR27_R4			FIELD8(0x40)
 
 /*
+ * RFCSR 29:
+ */
+#define RFCSR29_ADC6_TEST		FIELD8(0x01)
+#define RFCSR29_ADC6_INT_TEST		FIELD8(0x02)
+#define RFCSR29_RSSI_RESET		FIELD8(0x04)
+#define RFCSR29_RSSI_ON			FIELD8(0x08)
+#define RFCSR29_RSSI_RIP_CTRL		FIELD8(0x30)
+#define RFCSR29_RSSI_GAIN		FIELD8(0xc0)
+
+/*
  * RFCSR 30:
  */
 #define RFCSR30_TX_H20M			FIELD8(0x02)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 4d3747c..068276e 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -354,16 +354,15 @@ int rt2800_check_firmware(struct rt2x00_dev *rt2x00dev,
 	 * of 4kb. Certain USB chipsets however require different firmware,
 	 * which Ralink only provides attached to the original firmware
 	 * file. Thus for USB devices, firmware files have a length
-	 * which is a multiple of 4kb.
+	 * which is a multiple of 4kb. The firmware for rt3290 chip also
+	 * have a length which is a multiple of 4kb.
 	 */
-	if (rt2x00_is_usb(rt2x00dev)) {
+	if (rt2x00_is_usb(rt2x00dev) || rt2x00_rt(rt2x00dev, RT3290))
 		fw_len = 4096;
-		multiple = true;
-	} else {
+	else
 		fw_len = 8192;
-		multiple = true;
-	}
 
+	multiple = true;
 	/*
 	 * Validate the firmware length
 	 */
@@ -415,7 +414,8 @@ int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev,
 		return -EBUSY;
 
 	if (rt2x00_is_pci(rt2x00dev)) {
-		if (rt2x00_rt(rt2x00dev, RT3572) ||
+		if (rt2x00_rt(rt2x00dev, RT3290) ||
+		    rt2x00_rt(rt2x00dev, RT3572) ||
 		    rt2x00_rt(rt2x00dev, RT5390) ||
 		    rt2x00_rt(rt2x00dev, RT5392)) {
 			rt2800_register_read(rt2x00dev, AUX_CTRL, &reg);
@@ -851,8 +851,13 @@ int rt2800_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
 
-	rt2800_register_read(rt2x00dev, GPIO_CTRL_CFG, &reg);
-	return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2);
+	if (rt2x00_rt(rt2x00dev, RT3290)) {
+		rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, &reg);
+		return rt2x00_get_field32(reg, WLAN_GPIO_IN_BIT0);
+	} else {
+		rt2800_register_read(rt2x00dev, GPIO_CTRL_CFG, &reg);
+		return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2);
+	}
 }
 EXPORT_SYMBOL_GPL(rt2800_rfkill_poll);
 
@@ -1935,9 +1940,54 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
 	rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
 }
 
+#define RT3290_POWER_BOUND     0x27
+#define RT3290_FREQ_OFFSET_BOUND       0x5f
 #define RT5390_POWER_BOUND     0x27
 #define RT5390_FREQ_OFFSET_BOUND       0x5f
 
+static void rt2800_config_channel_rf3290(struct rt2x00_dev *rt2x00dev,
+					 struct ieee80211_conf *conf,
+					 struct rf_channel *rf,
+					 struct channel_info *info)
+{
+	u8 rfcsr;
+
+	rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1);
+	rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3);
+	rt2800_rfcsr_read(rt2x00dev, 11, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR11_R, rf->rf2);
+	rt2800_rfcsr_write(rt2x00dev, 11, rfcsr);
+
+	rt2800_rfcsr_read(rt2x00dev, 49, &rfcsr);
+	if (info->default_power1 > RT3290_POWER_BOUND)
+		rt2x00_set_field8(&rfcsr, RFCSR49_TX, RT3290_POWER_BOUND);
+	else
+		rt2x00_set_field8(&rfcsr, RFCSR49_TX, info->default_power1);
+	rt2800_rfcsr_write(rt2x00dev, 49, rfcsr);
+
+	rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr);
+	if (rt2x00dev->freq_offset > RT3290_FREQ_OFFSET_BOUND)
+		rt2x00_set_field8(&rfcsr, RFCSR17_CODE,
+				  RT3290_FREQ_OFFSET_BOUND);
+	else
+		rt2x00_set_field8(&rfcsr, RFCSR17_CODE, rt2x00dev->freq_offset);
+	rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
+
+	if (rf->channel <= 14) {
+		if (rf->channel == 6)
+			rt2800_bbp_write(rt2x00dev, 68, 0x0c);
+		else
+			rt2800_bbp_write(rt2x00dev, 68, 0x0b);
+
+		if (rf->channel >= 1 && rf->channel <= 6)
+			rt2800_bbp_write(rt2x00dev, 59, 0x0f);
+		else if (rf->channel >= 7 && rf->channel <= 11)
+			rt2800_bbp_write(rt2x00dev, 59, 0x0e);
+		else if (rf->channel >= 12 && rf->channel <= 14)
+			rt2800_bbp_write(rt2x00dev, 59, 0x0d);
+	}
+}
+
 static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev,
 					 struct ieee80211_conf *conf,
 					 struct rf_channel *rf,
@@ -2036,15 +2086,6 @@ static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev,
 			}
 		}
 	}
-
-	rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
-	rt2x00_set_field8(&rfcsr, RFCSR30_TX_H20M, 0);
-	rt2x00_set_field8(&rfcsr, RFCSR30_RX_H20M, 0);
-	rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
-
-	rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr);
-	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
-	rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
 }
 
 static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
@@ -2054,7 +2095,7 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
 {
 	u32 reg;
 	unsigned int tx_pin;
-	u8 bbp;
+	u8 bbp, rfcsr;
 
 	if (rf->channel <= 14) {
 		info->default_power1 = TXPOWER_G_TO_DEV(info->default_power1);
@@ -2075,6 +2116,9 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
 	case RF3052:
 		rt2800_config_channel_rf3052(rt2x00dev, conf, rf, info);
 		break;
+	case RF3290:
+		rt2800_config_channel_rf3290(rt2x00dev, conf, rf, info);
+		break;
 	case RF5360:
 	case RF5370:
 	case RF5372:
@@ -2086,6 +2130,22 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
 		rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info);
 	}
 
+	if (rt2x00_rf(rt2x00dev, RF3290) ||
+	    rt2x00_rf(rt2x00dev, RF5360) ||
+	    rt2x00_rf(rt2x00dev, RF5370) ||
+	    rt2x00_rf(rt2x00dev, RF5372) ||
+	    rt2x00_rf(rt2x00dev, RF5390) ||
+	    rt2x00_rf(rt2x00dev, RF5392)) {
+		rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
+		rt2x00_set_field8(&rfcsr, RFCSR30_TX_H20M, 0);
+		rt2x00_set_field8(&rfcsr, RFCSR30_RX_H20M, 0);
+		rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
+
+		rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr);
+		rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
+		rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
+	}
+
 	/*
 	 * Change BBP settings
 	 */
@@ -2566,6 +2626,7 @@ void rt2800_vco_calibration(struct rt2x00_dev *rt2x00dev)
 		rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
 		rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
 		break;
+	case RF3290:
 	case RF5360:
 	case RF5370:
 	case RF5372:
@@ -2701,6 +2762,7 @@ static u8 rt2800_get_default_vgc(struct rt2x00_dev *rt2x00dev)
 		if (rt2x00_rt(rt2x00dev, RT3070) ||
 		    rt2x00_rt(rt2x00dev, RT3071) ||
 		    rt2x00_rt(rt2x00dev, RT3090) ||
+		    rt2x00_rt(rt2x00dev, RT3290) ||
 		    rt2x00_rt(rt2x00dev, RT3390) ||
 		    rt2x00_rt(rt2x00dev, RT5390) ||
 		    rt2x00_rt(rt2x00dev, RT5392))
@@ -2797,10 +2859,54 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2);
 	rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
 
+	if (rt2x00_rt(rt2x00dev, RT3290)) {
+		rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, &reg);
+		if (rt2x00_get_field32(reg, WLAN_EN) == 1) {
+			rt2x00_set_field32(&reg, PCIE_APP0_CLK_REQ, 1);
+			rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
+		}
+
+		rt2800_register_read(rt2x00dev, CMB_CTRL, &reg);
+		if (!(rt2x00_get_field32(reg, LDO0_EN) == 1)) {
+			rt2x00_set_field32(&reg, LDO0_EN, 1);
+			rt2x00_set_field32(&reg, LDO_BGSEL, 3);
+			rt2800_register_write(rt2x00dev, CMB_CTRL, reg);
+		}
+
+		rt2800_register_read(rt2x00dev, OSC_CTRL, &reg);
+		rt2x00_set_field32(&reg, OSC_ROSC_EN, 1);
+		rt2x00_set_field32(&reg, OSC_CAL_REQ, 1);
+		rt2x00_set_field32(&reg, OSC_REF_CYCLE, 0x27);
+		rt2800_register_write(rt2x00dev, OSC_CTRL, reg);
+
+		rt2800_register_read(rt2x00dev, COEX_CFG0, &reg);
+		rt2x00_set_field32(&reg, COEX_CFG_ANT, 0x5e);
+		rt2800_register_write(rt2x00dev, COEX_CFG0, reg);
+
+		rt2800_register_read(rt2x00dev, COEX_CFG2, &reg);
+		rt2x00_set_field32(&reg, BT_COEX_CFG1, 0x00);
+		rt2x00_set_field32(&reg, BT_COEX_CFG0, 0x17);
+		rt2x00_set_field32(&reg, WL_COEX_CFG1, 0x93);
+		rt2x00_set_field32(&reg, WL_COEX_CFG0, 0x7f);
+		rt2800_register_write(rt2x00dev, COEX_CFG2, reg);
+
+		rt2800_register_read(rt2x00dev, PLL_CTRL, &reg);
+		rt2x00_set_field32(&reg, PLL_CONTROL, 1);
+		rt2800_register_write(rt2x00dev, PLL_CTRL, reg);
+	}
+
 	if (rt2x00_rt(rt2x00dev, RT3071) ||
 	    rt2x00_rt(rt2x00dev, RT3090) ||
+	    rt2x00_rt(rt2x00dev, RT3290) ||
 	    rt2x00_rt(rt2x00dev, RT3390)) {
-		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
+
+		if (rt2x00_rt(rt2x00dev, RT3290))
+			rt2800_register_write(rt2x00dev, TX_SW_CFG0,
+					      0x00000404);
+		else
+			rt2800_register_write(rt2x00dev, TX_SW_CFG0,
+					      0x00000400);
+
 		rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
 		if (rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
 		    rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) ||
@@ -3209,14 +3315,16 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
 		     rt2800_wait_bbp_ready(rt2x00dev)))
 		return -EACCES;
 
-	if (rt2x00_rt(rt2x00dev, RT5390) ||
-		rt2x00_rt(rt2x00dev, RT5392)) {
+	if (rt2x00_rt(rt2x00dev, RT3290) ||
+	    rt2x00_rt(rt2x00dev, RT5390) ||
+	    rt2x00_rt(rt2x00dev, RT5392)) {
 		rt2800_bbp_read(rt2x00dev, 4, &value);
 		rt2x00_set_field8(&value, BBP4_MAC_IF_CTRL, 1);
 		rt2800_bbp_write(rt2x00dev, 4, value);
 	}
 
 	if (rt2800_is_305x_soc(rt2x00dev) ||
+	    rt2x00_rt(rt2x00dev, RT3290) ||
 	    rt2x00_rt(rt2x00dev, RT3572) ||
 	    rt2x00_rt(rt2x00dev, RT5390) ||
 	    rt2x00_rt(rt2x00dev, RT5392))
@@ -3225,20 +3333,26 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
 	rt2800_bbp_write(rt2x00dev, 65, 0x2c);
 	rt2800_bbp_write(rt2x00dev, 66, 0x38);
 
-	if (rt2x00_rt(rt2x00dev, RT5390) ||
-		rt2x00_rt(rt2x00dev, RT5392))
+	if (rt2x00_rt(rt2x00dev, RT3290) ||
+	    rt2x00_rt(rt2x00dev, RT5390) ||
+	    rt2x00_rt(rt2x00dev, RT5392))
 		rt2800_bbp_write(rt2x00dev, 68, 0x0b);
 
 	if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C)) {
 		rt2800_bbp_write(rt2x00dev, 69, 0x16);
 		rt2800_bbp_write(rt2x00dev, 73, 0x12);
-	} else if (rt2x00_rt(rt2x00dev, RT5390) ||
-			   rt2x00_rt(rt2x00dev, RT5392)) {
+	} else if (rt2x00_rt(rt2x00dev, RT3290) ||
+		   rt2x00_rt(rt2x00dev, RT5390) ||
+		   rt2x00_rt(rt2x00dev, RT5392)) {
 		rt2800_bbp_write(rt2x00dev, 69, 0x12);
 		rt2800_bbp_write(rt2x00dev, 73, 0x13);
 		rt2800_bbp_write(rt2x00dev, 75, 0x46);
 		rt2800_bbp_write(rt2x00dev, 76, 0x28);
-		rt2800_bbp_write(rt2x00dev, 77, 0x59);
+
+		if (rt2x00_rt(rt2x00dev, RT3290))
+			rt2800_bbp_write(rt2x00dev, 77, 0x58);
+		else
+			rt2800_bbp_write(rt2x00dev, 77, 0x59);
 	} else {
 		rt2800_bbp_write(rt2x00dev, 69, 0x12);
 		rt2800_bbp_write(rt2x00dev, 73, 0x10);
@@ -3263,23 +3377,33 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
 		rt2800_bbp_write(rt2x00dev, 81, 0x37);
 	}
 
+	if (rt2x00_rt(rt2x00dev, RT3290)) {
+		rt2800_bbp_write(rt2x00dev, 74, 0x0b);
+		rt2800_bbp_write(rt2x00dev, 79, 0x18);
+		rt2800_bbp_write(rt2x00dev, 80, 0x09);
+		rt2800_bbp_write(rt2x00dev, 81, 0x33);
+	}
+
 	rt2800_bbp_write(rt2x00dev, 82, 0x62);
-	if (rt2x00_rt(rt2x00dev, RT5390) ||
-		rt2x00_rt(rt2x00dev, RT5392))
+	if (rt2x00_rt(rt2x00dev, RT3290) ||
+	    rt2x00_rt(rt2x00dev, RT5390) ||
+	    rt2x00_rt(rt2x00dev, RT5392))
 		rt2800_bbp_write(rt2x00dev, 83, 0x7a);
 	else
 		rt2800_bbp_write(rt2x00dev, 83, 0x6a);
 
 	if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860D))
 		rt2800_bbp_write(rt2x00dev, 84, 0x19);
-	else if (rt2x00_rt(rt2x00dev, RT5390) ||
-			 rt2x00_rt(rt2x00dev, RT5392))
+	else if (rt2x00_rt(rt2x00dev, RT3290) ||
+		     rt2x00_rt(rt2x00dev, RT5390) ||
+		     rt2x00_rt(rt2x00dev, RT5392))
 		rt2800_bbp_write(rt2x00dev, 84, 0x9a);
 	else
 		rt2800_bbp_write(rt2x00dev, 84, 0x99);
 
-	if (rt2x00_rt(rt2x00dev, RT5390) ||
-		rt2x00_rt(rt2x00dev, RT5392))
+	if (rt2x00_rt(rt2x00dev, RT3290) ||
+	    rt2x00_rt(rt2x00dev, RT5390) ||
+	    rt2x00_rt(rt2x00dev, RT5392))
 		rt2800_bbp_write(rt2x00dev, 86, 0x38);
 	else
 		rt2800_bbp_write(rt2x00dev, 86, 0x00);
@@ -3289,8 +3413,9 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
 
 	rt2800_bbp_write(rt2x00dev, 91, 0x04);
 
-	if (rt2x00_rt(rt2x00dev, RT5390) ||
-		rt2x00_rt(rt2x00dev, RT5392))
+	if (rt2x00_rt(rt2x00dev, RT3290) ||
+	    rt2x00_rt(rt2x00dev, RT5390) ||
+	    rt2x00_rt(rt2x00dev, RT5392))
 		rt2800_bbp_write(rt2x00dev, 92, 0x02);
 	else
 		rt2800_bbp_write(rt2x00dev, 92, 0x00);
@@ -3304,6 +3429,7 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
 	    rt2x00_rt_rev_gte(rt2x00dev, RT3071, REV_RT3071E) ||
 	    rt2x00_rt_rev_gte(rt2x00dev, RT3090, REV_RT3090E) ||
 	    rt2x00_rt_rev_gte(rt2x00dev, RT3390, REV_RT3390E) ||
+	    rt2x00_rt(rt2x00dev, RT3290) ||
 	    rt2x00_rt(rt2x00dev, RT3572) ||
 	    rt2x00_rt(rt2x00dev, RT5390) ||
 	    rt2x00_rt(rt2x00dev, RT5392) ||
@@ -3312,27 +3438,32 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
 	else
 		rt2800_bbp_write(rt2x00dev, 103, 0x00);
 
-	if (rt2x00_rt(rt2x00dev, RT5390) ||
-		rt2x00_rt(rt2x00dev, RT5392))
+	if (rt2x00_rt(rt2x00dev, RT3290) ||
+	    rt2x00_rt(rt2x00dev, RT5390) ||
+	    rt2x00_rt(rt2x00dev, RT5392))
 		rt2800_bbp_write(rt2x00dev, 104, 0x92);
 
 	if (rt2800_is_305x_soc(rt2x00dev))
 		rt2800_bbp_write(rt2x00dev, 105, 0x01);
+	else if (rt2x00_rt(rt2x00dev, RT3290))
+		rt2800_bbp_write(rt2x00dev, 105, 0x1c);
 	else if (rt2x00_rt(rt2x00dev, RT5390) ||
 			 rt2x00_rt(rt2x00dev, RT5392))
 		rt2800_bbp_write(rt2x00dev, 105, 0x3c);
 	else
 		rt2800_bbp_write(rt2x00dev, 105, 0x05);
 
-	if (rt2x00_rt(rt2x00dev, RT5390))
+	if (rt2x00_rt(rt2x00dev, RT3290) ||
+	    rt2x00_rt(rt2x00dev, RT5390))
 		rt2800_bbp_write(rt2x00dev, 106, 0x03);
 	else if (rt2x00_rt(rt2x00dev, RT5392))
 		rt2800_bbp_write(rt2x00dev, 106, 0x12);
 	else
 		rt2800_bbp_write(rt2x00dev, 106, 0x35);
 
-	if (rt2x00_rt(rt2x00dev, RT5390) ||
-		rt2x00_rt(rt2x00dev, RT5392))
+	if (rt2x00_rt(rt2x00dev, RT3290) ||
+	    rt2x00_rt(rt2x00dev, RT5390) ||
+	    rt2x00_rt(rt2x00dev, RT5392))
 		rt2800_bbp_write(rt2x00dev, 128, 0x12);
 
 	if (rt2x00_rt(rt2x00dev, RT5392)) {
@@ -3357,6 +3488,29 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
 		rt2800_bbp_write(rt2x00dev, 138, value);
 	}
 
+	if (rt2x00_rt(rt2x00dev, RT3290)) {
+		rt2800_bbp_write(rt2x00dev, 67, 0x24);
+		rt2800_bbp_write(rt2x00dev, 143, 0x04);
+		rt2800_bbp_write(rt2x00dev, 142, 0x99);
+		rt2800_bbp_write(rt2x00dev, 150, 0x30);
+		rt2800_bbp_write(rt2x00dev, 151, 0x2e);
+		rt2800_bbp_write(rt2x00dev, 152, 0x20);
+		rt2800_bbp_write(rt2x00dev, 153, 0x34);
+		rt2800_bbp_write(rt2x00dev, 154, 0x40);
+		rt2800_bbp_write(rt2x00dev, 155, 0x3b);
+		rt2800_bbp_write(rt2x00dev, 253, 0x04);
+
+		rt2800_bbp_read(rt2x00dev, 47, &value);
+		rt2x00_set_field8(&value, BBP47_TSSI_ADC6, 1);
+		rt2800_bbp_write(rt2x00dev, 47, value);
+
+		/* Use 5-bit ADC for Acquisition and 8-bit ADC for data */
+		rt2800_bbp_read(rt2x00dev, 3, &value);
+		rt2x00_set_field8(&value, BBP3_ADC_MODE_SWITCH, 1);
+		rt2x00_set_field8(&value, BBP3_ADC_INIT_MODE, 1);
+		rt2800_bbp_write(rt2x00dev, 3, value);
+	}
+
 	if (rt2x00_rt(rt2x00dev, RT5390) ||
 		rt2x00_rt(rt2x00dev, RT5392)) {
 		int ant, div_mode;
@@ -3489,6 +3643,7 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
 	if (!rt2x00_rt(rt2x00dev, RT3070) &&
 	    !rt2x00_rt(rt2x00dev, RT3071) &&
 	    !rt2x00_rt(rt2x00dev, RT3090) &&
+	    !rt2x00_rt(rt2x00dev, RT3290) &&
 	    !rt2x00_rt(rt2x00dev, RT3390) &&
 	    !rt2x00_rt(rt2x00dev, RT3572) &&
 	    !rt2x00_rt(rt2x00dev, RT5390) &&
@@ -3499,8 +3654,9 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Init RF calibration.
 	 */
-	if (rt2x00_rt(rt2x00dev, RT5390) ||
-		rt2x00_rt(rt2x00dev, RT5392)) {
+	if (rt2x00_rt(rt2x00dev, RT3290) ||
+	    rt2x00_rt(rt2x00dev, RT5390) ||
+	    rt2x00_rt(rt2x00dev, RT5392)) {
 		rt2800_rfcsr_read(rt2x00dev, 2, &rfcsr);
 		rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 1);
 		rt2800_rfcsr_write(rt2x00dev, 2, rfcsr);
@@ -3538,6 +3694,53 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
 		rt2800_rfcsr_write(rt2x00dev, 24, 0x16);
 		rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
 		rt2800_rfcsr_write(rt2x00dev, 29, 0x1f);
+	} else if (rt2x00_rt(rt2x00dev, RT3290)) {
+		rt2800_rfcsr_write(rt2x00dev, 1, 0x0f);
+		rt2800_rfcsr_write(rt2x00dev, 2, 0x80);
+		rt2800_rfcsr_write(rt2x00dev, 3, 0x08);
+		rt2800_rfcsr_write(rt2x00dev, 4, 0x00);
+		rt2800_rfcsr_write(rt2x00dev, 6, 0xa0);
+		rt2800_rfcsr_write(rt2x00dev, 8, 0xf3);
+		rt2800_rfcsr_write(rt2x00dev, 9, 0x02);
+		rt2800_rfcsr_write(rt2x00dev, 10, 0x53);
+		rt2800_rfcsr_write(rt2x00dev, 11, 0x4a);
+		rt2800_rfcsr_write(rt2x00dev, 12, 0x46);
+		rt2800_rfcsr_write(rt2x00dev, 13, 0x9f);
+		rt2800_rfcsr_write(rt2x00dev, 18, 0x02);
+		rt2800_rfcsr_write(rt2x00dev, 22, 0x20);
+		rt2800_rfcsr_write(rt2x00dev, 25, 0x83);
+		rt2800_rfcsr_write(rt2x00dev, 26, 0x82);
+		rt2800_rfcsr_write(rt2x00dev, 27, 0x09);
+		rt2800_rfcsr_write(rt2x00dev, 29, 0x10);
+		rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
+		rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
+		rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
+		rt2800_rfcsr_write(rt2x00dev, 33, 0x00);
+		rt2800_rfcsr_write(rt2x00dev, 34, 0x05);
+		rt2800_rfcsr_write(rt2x00dev, 35, 0x12);
+		rt2800_rfcsr_write(rt2x00dev, 36, 0x00);
+		rt2800_rfcsr_write(rt2x00dev, 38, 0x85);
+		rt2800_rfcsr_write(rt2x00dev, 39, 0x1b);
+		rt2800_rfcsr_write(rt2x00dev, 40, 0x0b);
+		rt2800_rfcsr_write(rt2x00dev, 41, 0xbb);
+		rt2800_rfcsr_write(rt2x00dev, 42, 0xd5);
+		rt2800_rfcsr_write(rt2x00dev, 43, 0x7b);
+		rt2800_rfcsr_write(rt2x00dev, 44, 0x0e);
+		rt2800_rfcsr_write(rt2x00dev, 45, 0xa2);
+		rt2800_rfcsr_write(rt2x00dev, 46, 0x73);
+		rt2800_rfcsr_write(rt2x00dev, 47, 0x00);
+		rt2800_rfcsr_write(rt2x00dev, 48, 0x10);
+		rt2800_rfcsr_write(rt2x00dev, 49, 0x98);
+		rt2800_rfcsr_write(rt2x00dev, 52, 0x38);
+		rt2800_rfcsr_write(rt2x00dev, 53, 0x00);
+		rt2800_rfcsr_write(rt2x00dev, 54, 0x78);
+		rt2800_rfcsr_write(rt2x00dev, 55, 0x43);
+		rt2800_rfcsr_write(rt2x00dev, 56, 0x02);
+		rt2800_rfcsr_write(rt2x00dev, 57, 0x80);
+		rt2800_rfcsr_write(rt2x00dev, 58, 0x7f);
+		rt2800_rfcsr_write(rt2x00dev, 59, 0x09);
+		rt2800_rfcsr_write(rt2x00dev, 60, 0x45);
+		rt2800_rfcsr_write(rt2x00dev, 61, 0xc1);
 	} else if (rt2x00_rt(rt2x00dev, RT3390)) {
 		rt2800_rfcsr_write(rt2x00dev, 0, 0xa0);
 		rt2800_rfcsr_write(rt2x00dev, 1, 0xe1);
@@ -3946,6 +4149,12 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
 		rt2800_rfcsr_write(rt2x00dev, 27, rfcsr);
 	}
 
+	if (rt2x00_rt(rt2x00dev, RT3290)) {
+		rt2800_rfcsr_read(rt2x00dev, 29, &rfcsr);
+		rt2x00_set_field8(&rfcsr, RFCSR29_RSSI_GAIN, 3);
+		rt2800_rfcsr_write(rt2x00dev, 29, rfcsr);
+	}
+
 	if (rt2x00_rt(rt2x00dev, RT5390) ||
 		rt2x00_rt(rt2x00dev, RT5392)) {
 		rt2800_rfcsr_read(rt2x00dev, 38, &rfcsr);
@@ -4052,9 +4261,14 @@ EXPORT_SYMBOL_GPL(rt2800_disable_radio);
 int rt2800_efuse_detect(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
+	u16 efuse_ctrl_reg;
 
-	rt2800_register_read(rt2x00dev, EFUSE_CTRL, &reg);
+	if (rt2x00_rt(rt2x00dev, RT3290))
+		efuse_ctrl_reg = EFUSE_CTRL_3290;
+	else
+		efuse_ctrl_reg = EFUSE_CTRL;
 
+	rt2800_register_read(rt2x00dev, efuse_ctrl_reg, &reg);
 	return rt2x00_get_field32(reg, EFUSE_CTRL_PRESENT);
 }
 EXPORT_SYMBOL_GPL(rt2800_efuse_detect);
@@ -4062,27 +4276,44 @@ EXPORT_SYMBOL_GPL(rt2800_efuse_detect);
 static void rt2800_efuse_read(struct rt2x00_dev *rt2x00dev, unsigned int i)
 {
 	u32 reg;
-
+	u16 efuse_ctrl_reg;
+	u16 efuse_data0_reg;
+	u16 efuse_data1_reg;
+	u16 efuse_data2_reg;
+	u16 efuse_data3_reg;
+
+	if (rt2x00_rt(rt2x00dev, RT3290)) {
+		efuse_ctrl_reg = EFUSE_CTRL_3290;
+		efuse_data0_reg = EFUSE_DATA0_3290;
+		efuse_data1_reg = EFUSE_DATA1_3290;
+		efuse_data2_reg = EFUSE_DATA2_3290;
+		efuse_data3_reg = EFUSE_DATA3_3290;
+	} else {
+		efuse_ctrl_reg = EFUSE_CTRL;
+		efuse_data0_reg = EFUSE_DATA0;
+		efuse_data1_reg = EFUSE_DATA1;
+		efuse_data2_reg = EFUSE_DATA2;
+		efuse_data3_reg = EFUSE_DATA3;
+	}
 	mutex_lock(&rt2x00dev->csr_mutex);
 
-	rt2800_register_read_lock(rt2x00dev, EFUSE_CTRL, &reg);
+	rt2800_register_read_lock(rt2x00dev, efuse_ctrl_reg, &reg);
 	rt2x00_set_field32(&reg, EFUSE_CTRL_ADDRESS_IN, i);
 	rt2x00_set_field32(&reg, EFUSE_CTRL_MODE, 0);
 	rt2x00_set_field32(&reg, EFUSE_CTRL_KICK, 1);
-	rt2800_register_write_lock(rt2x00dev, EFUSE_CTRL, reg);
+	rt2800_register_write_lock(rt2x00dev, efuse_ctrl_reg, reg);
 
 	/* Wait until the EEPROM has been loaded */
-	rt2800_regbusy_read(rt2x00dev, EFUSE_CTRL, EFUSE_CTRL_KICK, &reg);
-
+	rt2800_regbusy_read(rt2x00dev, efuse_ctrl_reg, EFUSE_CTRL_KICK, &reg);
 	/* Apparently the data is read from end to start */
-	rt2800_register_read_lock(rt2x00dev, EFUSE_DATA3, &reg);
+	rt2800_register_read_lock(rt2x00dev, efuse_data3_reg, &reg);
 	/* The returned value is in CPU order, but eeprom is le */
 	*(u32 *)&rt2x00dev->eeprom[i] = cpu_to_le32(reg);
-	rt2800_register_read_lock(rt2x00dev, EFUSE_DATA2, &reg);
+	rt2800_register_read_lock(rt2x00dev, efuse_data2_reg, &reg);
 	*(u32 *)&rt2x00dev->eeprom[i + 2] = cpu_to_le32(reg);
-	rt2800_register_read_lock(rt2x00dev, EFUSE_DATA1, &reg);
+	rt2800_register_read_lock(rt2x00dev, efuse_data1_reg, &reg);
 	*(u32 *)&rt2x00dev->eeprom[i + 4] = cpu_to_le32(reg);
-	rt2800_register_read_lock(rt2x00dev, EFUSE_DATA0, &reg);
+	rt2800_register_read_lock(rt2x00dev, efuse_data0_reg, &reg);
 	*(u32 *)&rt2x00dev->eeprom[i + 6] = cpu_to_le32(reg);
 
 	mutex_unlock(&rt2x00dev->csr_mutex);
@@ -4244,9 +4475,14 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	 * RT28xx/RT30xx: defined in "EEPROM_NIC_CONF0_RF_TYPE" field
 	 * RT53xx: defined in "EEPROM_CHIP_ID" field
 	 */
-	rt2800_register_read(rt2x00dev, MAC_CSR0, &reg);
-	if (rt2x00_get_field32(reg, MAC_CSR0_CHIPSET) == RT5390 ||
-		rt2x00_get_field32(reg, MAC_CSR0_CHIPSET) == RT5392)
+	if (rt2x00_rt(rt2x00dev, RT3290))
+		rt2800_register_read(rt2x00dev, MAC_CSR0_3290, &reg);
+	else
+		rt2800_register_read(rt2x00dev, MAC_CSR0, &reg);
+
+	if (rt2x00_get_field32(reg, MAC_CSR0_CHIPSET) == RT3290 ||
+	    rt2x00_get_field32(reg, MAC_CSR0_CHIPSET) == RT5390 ||
+	    rt2x00_get_field32(reg, MAC_CSR0_CHIPSET) == RT5392)
 		rt2x00_eeprom_read(rt2x00dev, EEPROM_CHIP_ID, &value);
 	else
 		value = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RF_TYPE);
@@ -4261,6 +4497,7 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	case RT3070:
 	case RT3071:
 	case RT3090:
+	case RT3290:
 	case RT3390:
 	case RT3572:
 	case RT5390:
@@ -4281,6 +4518,7 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	case RF3021:
 	case RF3022:
 	case RF3052:
+	case RF3290:
 	case RF3320:
 	case RF5360:
 	case RF5370:
@@ -4597,6 +4835,7 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 		   rt2x00_rf(rt2x00dev, RF2020) ||
 		   rt2x00_rf(rt2x00dev, RF3021) ||
 		   rt2x00_rf(rt2x00dev, RF3022) ||
+		   rt2x00_rf(rt2x00dev, RF3290) ||
 		   rt2x00_rf(rt2x00dev, RF3320) ||
 		   rt2x00_rf(rt2x00dev, RF5360) ||
 		   rt2x00_rf(rt2x00dev, RF5370) ||
@@ -4685,6 +4924,7 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	case RF3022:
 	case RF3320:
 	case RF3052:
+	case RF3290:
 	case RF5360:
 	case RF5370:
 	case RF5372:
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 206158b..dd43612 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -280,7 +280,13 @@ static void rt2800pci_stop_queue(struct data_queue *queue)
  */
 static char *rt2800pci_get_firmware_name(struct rt2x00_dev *rt2x00dev)
 {
-	return FIRMWARE_RT2860;
+	/*
+	 * Chip rt3290 use specific 4KB firmware named rt3290.bin.
+	 */
+	if (rt2x00_rt(rt2x00dev, RT3290))
+		return FIRMWARE_RT3290;
+	else
+		return FIRMWARE_RT2860;
 }
 
 static int rt2800pci_write_firmware(struct rt2x00_dev *rt2x00dev,
@@ -974,6 +980,66 @@ static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 	return rt2800_validate_eeprom(rt2x00dev);
 }
 
+static int rt2800_enable_wlan_rt3290(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+	int i, count;
+
+	rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, &reg);
+	if ((rt2x00_get_field32(reg, WLAN_EN) == 1))
+		return 0;
+
+	rt2x00_set_field32(&reg, WLAN_GPIO_OUT_OE_BIT_ALL, 0xff);
+	rt2x00_set_field32(&reg, FRC_WL_ANT_SET, 1);
+	rt2x00_set_field32(&reg, WLAN_CLK_EN, 0);
+	rt2x00_set_field32(&reg, WLAN_EN, 1);
+	rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
+
+	udelay(REGISTER_BUSY_DELAY);
+
+	count = 0;
+	do {
+		/*
+		 * Check PLL_LD & XTAL_RDY.
+		 */
+		for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+			rt2800_register_read(rt2x00dev, CMB_CTRL, &reg);
+			if ((rt2x00_get_field32(reg, PLL_LD) == 1) &&
+				(rt2x00_get_field32(reg, XTAL_RDY) == 1))
+					break;
+			udelay(REGISTER_BUSY_DELAY);
+		}
+
+		if (i >= REGISTER_BUSY_COUNT) {
+
+			if (count >= 10)
+				return -EIO;
+
+			rt2800_register_write(rt2x00dev, 0x58, 0x018);
+			udelay(REGISTER_BUSY_DELAY);
+			rt2800_register_write(rt2x00dev, 0x58, 0x418);
+			udelay(REGISTER_BUSY_DELAY);
+			rt2800_register_write(rt2x00dev, 0x58, 0x618);
+			udelay(REGISTER_BUSY_DELAY);
+			count++;
+		} else {
+			count = 0;
+		}
+
+		rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, &reg);
+		rt2x00_set_field32(&reg, PCIE_APP0_CLK_REQ, 0);
+		rt2x00_set_field32(&reg, WLAN_CLK_EN, 1);
+		rt2x00_set_field32(&reg, WLAN_RESET, 1);
+		rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
+		udelay(10);
+		rt2x00_set_field32(&reg, WLAN_RESET, 0);
+		rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
+		udelay(10);
+		rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, 0x7fffffff);
+	} while (count != 0);
+
+	return 0;
+}
 static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
@@ -997,6 +1063,17 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 		return retval;
 
 	/*
+	 * In probe phase call rt2800_enable_wlan_rt3290 to enable wlan
+	 * clk for rt3290. That avoid the MCU fail in start phase.
+	 */
+	if (rt2x00_rt(rt2x00dev, RT3290)) {
+		retval = rt2800_enable_wlan_rt3290(rt2x00dev);
+
+		if (retval)
+			return retval;
+	}
+
+	/*
 	 * This device has multiple filters for control frames
 	 * and has a separate filter for PS Poll frames.
 	 */
@@ -1175,6 +1252,9 @@ static DEFINE_PCI_DEVICE_TABLE(rt2800pci_device_table) = {
 	{ PCI_DEVICE(0x1432, 0x7768) },
 	{ PCI_DEVICE(0x1462, 0x891a) },
 	{ PCI_DEVICE(0x1a3b, 0x1059) },
+#ifdef CONFIG_RT2800PCI_RT3290
+	{ PCI_DEVICE(0x1814, 0x3290) },
+#endif
 #ifdef CONFIG_RT2800PCI_RT33XX
 	{ PCI_DEVICE(0x1814, 0x3390) },
 #endif
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.h b/drivers/net/wireless/rt2x00/rt2800pci.h
index 70e050d..ab22a08 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.h
+++ b/drivers/net/wireless/rt2x00/rt2800pci.h
@@ -47,6 +47,7 @@
  * 8051 firmware image.
  */
 #define FIRMWARE_RT2860			"rt2860.bin"
+#define FIRMWARE_RT3290			"rt3290.bin"
 #define FIRMWARE_IMAGE_BASE		0x2000
 
 /*
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 8f75402..8afb546 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -187,6 +187,7 @@ struct rt2x00_chip {
 #define RT3070		0x3070
 #define RT3071		0x3071
 #define RT3090		0x3090	/* 2.4GHz PCIe */
+#define RT3290		0x3290
 #define RT3390		0x3390
 #define RT3572		0x3572
 #define RT3593		0x3593
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
index 0a4653a..a0c8cae 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -256,6 +256,7 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct rt2x00_ops *ops)
 	struct ieee80211_hw *hw;
 	struct rt2x00_dev *rt2x00dev;
 	int retval;
+	u16 chip;
 
 	retval = pci_enable_device(pci_dev);
 	if (retval) {
@@ -305,6 +306,14 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct rt2x00_ops *ops)
 	if (retval)
 		goto exit_free_device;
 
+	/*
+	 * Because rt3290 chip use different efuse offset to read efuse data.
+	 * So before read efuse it need to indicate it is the
+	 * rt3290 or not.
+	 */
+	pci_read_config_word(pci_dev, PCI_DEVICE_ID, &chip);
+	rt2x00dev->chip.rt = chip;
+
 	retval = rt2x00lib_probe_dev(rt2x00dev);
 	if (retval)
 		goto exit_free_reg;
-- 
cgit v1.1


From 4fc0d0160d59689a90cebcdc9c269ac1d8c6d161 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Thu, 14 Jun 2012 12:16:57 +0200
Subject: brcmfmac: introduce checkdied debugfs functionality

The checkdied functionality provides useful information for analyzing
firmware crashes. By exposing this information to a debugfs file users
can easily provide its content in bug reports. The functionality is
available only when CONFIG_BRCMDBG is selected.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 332 ++++++++++++++++++++-
 1 file changed, 331 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index a07fb01..9971e13 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -31,6 +31,7 @@
 #include <linux/firmware.h>
 #include <linux/module.h>
 #include <linux/bcma/bcma.h>
+#include <linux/debugfs.h>
 #include <asm/unaligned.h>
 #include <defs.h>
 #include <brcmu_wifi.h>
@@ -48,6 +49,9 @@
 
 #define CBUF_LEN	(128)
 
+/* Device console log buffer state */
+#define CONSOLE_BUFFER_MAX	2024
+
 struct rte_log_le {
 	__le32 buf;		/* Can't be pointer on (64-bit) hosts */
 	__le32 buf_size;
@@ -281,7 +285,7 @@ struct rte_console {
  * Shared structure between dongle and the host.
  * The structure contains pointers to trap or assert information.
  */
-#define SDPCM_SHARED_VERSION       0x0002
+#define SDPCM_SHARED_VERSION       0x0003
 #define SDPCM_SHARED_VERSION_MASK  0x00FF
 #define SDPCM_SHARED_ASSERT_BUILT  0x0100
 #define SDPCM_SHARED_ASSERT        0x0200
@@ -428,6 +432,29 @@ struct brcmf_console {
 	u8 *buf;		/* Log buffer (host copy) */
 	uint last;		/* Last buffer read index */
 };
+
+struct brcmf_trap_info {
+	__le32		type;
+	__le32		epc;
+	__le32		cpsr;
+	__le32		spsr;
+	__le32		r0;	/* a1 */
+	__le32		r1;	/* a2 */
+	__le32		r2;	/* a3 */
+	__le32		r3;	/* a4 */
+	__le32		r4;	/* v1 */
+	__le32		r5;	/* v2 */
+	__le32		r6;	/* v3 */
+	__le32		r7;	/* v4 */
+	__le32		r8;	/* v5 */
+	__le32		r9;	/* sb/v6 */
+	__le32		r10;	/* sl/v7 */
+	__le32		r11;	/* fp/v8 */
+	__le32		r12;	/* ip */
+	__le32		r13;	/* sp */
+	__le32		r14;	/* lr */
+	__le32		pc;	/* r15 */
+};
 #endif				/* DEBUG */
 
 struct sdpcm_shared {
@@ -439,6 +466,7 @@ struct sdpcm_shared {
 	u32 console_addr;	/* Address of struct rte_console */
 	u32 msgtrace_addr;
 	u8 tag[32];
+	u32 brpt_addr;
 };
 
 struct sdpcm_shared_le {
@@ -450,6 +478,7 @@ struct sdpcm_shared_le {
 	__le32 console_addr;	/* Address of struct rte_console */
 	__le32 msgtrace_addr;
 	u8 tag[32];
+	__le32 brpt_addr;
 };
 
 
@@ -2953,13 +2982,311 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
 }
 
 #ifdef DEBUG
+static inline bool brcmf_sdio_valid_shared_address(u32 addr)
+{
+	return !(addr == 0 || ((~addr >> 16) & 0xffff) == (addr & 0xffff));
+}
+
+static int brcmf_sdio_readshared(struct brcmf_sdio *bus,
+				 struct sdpcm_shared *sh)
+{
+	u32 addr;
+	int rv;
+	u32 shaddr = 0;
+	struct sdpcm_shared_le sh_le;
+	__le32 addr_le;
+
+	shaddr = bus->ramsize - 4;
+
+	/*
+	 * Read last word in socram to determine
+	 * address of sdpcm_shared structure
+	 */
+	rv = brcmf_sdbrcm_membytes(bus, false, shaddr,
+				   (u8 *)&addr_le, 4);
+	if (rv < 0)
+		return rv;
+
+	addr = le32_to_cpu(addr_le);
+
+	brcmf_dbg(INFO, "sdpcm_shared address 0x%08X\n", addr);
+
+	/*
+	 * Check if addr is valid.
+	 * NVRAM length at the end of memory should have been overwritten.
+	 */
+	if (!brcmf_sdio_valid_shared_address(addr)) {
+			brcmf_dbg(ERROR, "invalid sdpcm_shared address 0x%08X\n",
+				  addr);
+			return -EINVAL;
+	}
+
+	/* Read hndrte_shared structure */
+	rv = brcmf_sdbrcm_membytes(bus, false, addr, (u8 *)&sh_le,
+				   sizeof(struct sdpcm_shared_le));
+	if (rv < 0)
+		return rv;
+
+	/* Endianness */
+	sh->flags = le32_to_cpu(sh_le.flags);
+	sh->trap_addr = le32_to_cpu(sh_le.trap_addr);
+	sh->assert_exp_addr = le32_to_cpu(sh_le.assert_exp_addr);
+	sh->assert_file_addr = le32_to_cpu(sh_le.assert_file_addr);
+	sh->assert_line = le32_to_cpu(sh_le.assert_line);
+	sh->console_addr = le32_to_cpu(sh_le.console_addr);
+	sh->msgtrace_addr = le32_to_cpu(sh_le.msgtrace_addr);
+
+	if ((sh->flags & SDPCM_SHARED_VERSION_MASK) != SDPCM_SHARED_VERSION) {
+		brcmf_dbg(ERROR,
+			  "sdpcm_shared version mismatch: dhd %d dongle %d\n",
+			  SDPCM_SHARED_VERSION,
+			  sh->flags & SDPCM_SHARED_VERSION_MASK);
+		return -EPROTO;
+	}
+
+	return 0;
+}
+
+static int brcmf_sdio_dump_console(struct brcmf_sdio *bus,
+				   struct sdpcm_shared *sh, char __user *data,
+				   size_t count)
+{
+	u32 addr, console_ptr, console_size, console_index;
+	char *conbuf = NULL;
+	__le32 sh_val;
+	int rv;
+	loff_t pos = 0;
+	int nbytes = 0;
+
+	/* obtain console information from device memory */
+	addr = sh->console_addr + offsetof(struct rte_console, log_le);
+	rv = brcmf_sdbrcm_membytes(bus, false, addr,
+			(u8 *)&sh_val, sizeof(u32));
+	if (rv < 0)
+		return rv;
+	console_ptr = le32_to_cpu(sh_val);
+
+	addr = sh->console_addr + offsetof(struct rte_console, log_le.buf_size);
+	rv = brcmf_sdbrcm_membytes(bus, false, addr,
+			(u8 *)&sh_val, sizeof(u32));
+	if (rv < 0)
+		return rv;
+	console_size = le32_to_cpu(sh_val);
+
+	addr = sh->console_addr + offsetof(struct rte_console, log_le.idx);
+	rv = brcmf_sdbrcm_membytes(bus, false, addr,
+			(u8 *)&sh_val, sizeof(u32));
+	if (rv < 0)
+		return rv;
+	console_index = le32_to_cpu(sh_val);
+
+	/* allocate buffer for console data */
+	if (console_size <= CONSOLE_BUFFER_MAX)
+		conbuf = vzalloc(console_size+1);
+
+	if (!conbuf)
+		return -ENOMEM;
+
+	/* obtain the console data from device */
+	conbuf[console_size] = '\0';
+	rv = brcmf_sdbrcm_membytes(bus, false, console_ptr, (u8 *)conbuf,
+				   console_size);
+	if (rv < 0)
+		goto done;
+
+	rv = simple_read_from_buffer(data, count, &pos,
+				     conbuf + console_index,
+				     console_size - console_index);
+	if (rv < 0)
+		goto done;
+
+	nbytes = rv;
+	if (console_index > 0) {
+		pos = 0;
+		rv = simple_read_from_buffer(data+nbytes, count, &pos,
+					     conbuf, console_index - 1);
+		if (rv < 0)
+			goto done;
+		rv += nbytes;
+	}
+done:
+	vfree(conbuf);
+	return rv;
+}
+
+static int brcmf_sdio_trap_info(struct brcmf_sdio *bus, struct sdpcm_shared *sh,
+				char __user *data, size_t count)
+{
+	int error, res;
+	char buf[350];
+	struct brcmf_trap_info tr;
+	int nbytes;
+	loff_t pos = 0;
+
+	if ((sh->flags & SDPCM_SHARED_TRAP) == 0)
+		return 0;
+
+	error = brcmf_sdbrcm_membytes(bus, false, sh->trap_addr, (u8 *)&tr,
+				      sizeof(struct brcmf_trap_info));
+	if (error < 0)
+		return error;
+
+	nbytes = brcmf_sdio_dump_console(bus, sh, data, count);
+	if (nbytes < 0)
+		return nbytes;
+
+	res = scnprintf(buf, sizeof(buf),
+			"dongle trap info: type 0x%x @ epc 0x%08x\n"
+			"  cpsr 0x%08x spsr 0x%08x sp 0x%08x\n"
+			"  lr   0x%08x pc   0x%08x offset 0x%x\n"
+			"  r0   0x%08x r1   0x%08x r2 0x%08x r3 0x%08x\n"
+			"  r4   0x%08x r5   0x%08x r6 0x%08x r7 0x%08x\n",
+			le32_to_cpu(tr.type), le32_to_cpu(tr.epc),
+			le32_to_cpu(tr.cpsr), le32_to_cpu(tr.spsr),
+			le32_to_cpu(tr.r13), le32_to_cpu(tr.r14),
+			le32_to_cpu(tr.pc), le32_to_cpu(sh->trap_addr),
+			le32_to_cpu(tr.r0), le32_to_cpu(tr.r1),
+			le32_to_cpu(tr.r2), le32_to_cpu(tr.r3),
+			le32_to_cpu(tr.r4), le32_to_cpu(tr.r5),
+			le32_to_cpu(tr.r6), le32_to_cpu(tr.r7));
+
+	error = simple_read_from_buffer(data+nbytes, count, &pos, buf, res);
+	if (error < 0)
+		return error;
+
+	nbytes += error;
+	return nbytes;
+}
+
+static int brcmf_sdio_assert_info(struct brcmf_sdio *bus,
+				  struct sdpcm_shared *sh, char __user *data,
+				  size_t count)
+{
+	int error = 0;
+	char buf[200];
+	char file[80] = "?";
+	char expr[80] = "<???>";
+	int res;
+	loff_t pos = 0;
+
+	if ((sh->flags & SDPCM_SHARED_ASSERT_BUILT) == 0) {
+		brcmf_dbg(INFO, "firmware not built with -assert\n");
+		return 0;
+	} else if ((sh->flags & SDPCM_SHARED_ASSERT) == 0) {
+		brcmf_dbg(INFO, "no assert in dongle\n");
+		return 0;
+	}
+
+	if (sh->assert_file_addr != 0) {
+		error = brcmf_sdbrcm_membytes(bus, false, sh->assert_file_addr,
+					      (u8 *)file, 80);
+		if (error < 0)
+			return error;
+	}
+	if (sh->assert_exp_addr != 0) {
+		error = brcmf_sdbrcm_membytes(bus, false, sh->assert_exp_addr,
+					      (u8 *)expr, 80);
+		if (error < 0)
+			return error;
+	}
+
+	res = scnprintf(buf, sizeof(buf),
+			"dongle assert: %s:%d: assert(%s)\n",
+			file, sh->assert_line, expr);
+	return simple_read_from_buffer(data, count, &pos, buf, res);
+}
+
+static int brcmf_sdbrcm_checkdied(struct brcmf_sdio *bus)
+{
+	int error;
+	struct sdpcm_shared sh;
+
+	down(&bus->sdsem);
+	error = brcmf_sdio_readshared(bus, &sh);
+	up(&bus->sdsem);
+
+	if (error < 0)
+		return error;
+
+	if ((sh.flags & SDPCM_SHARED_ASSERT_BUILT) == 0)
+		brcmf_dbg(INFO, "firmware not built with -assert\n");
+	else if (sh.flags & SDPCM_SHARED_ASSERT)
+		brcmf_dbg(ERROR, "assertion in dongle\n");
+
+	if (sh.flags & SDPCM_SHARED_TRAP)
+		brcmf_dbg(ERROR, "firmware trap in dongle\n");
+
+	return 0;
+}
+
+static int brcmf_sdbrcm_died_dump(struct brcmf_sdio *bus, char __user *data,
+				  size_t count, loff_t *ppos)
+{
+	int error = 0;
+	struct sdpcm_shared sh;
+	int nbytes = 0;
+	loff_t pos = *ppos;
+
+	if (pos != 0)
+		return 0;
+
+	down(&bus->sdsem);
+	error = brcmf_sdio_readshared(bus, &sh);
+	if (error < 0)
+		goto done;
+
+	error = brcmf_sdio_assert_info(bus, &sh, data, count);
+	if (error < 0)
+		goto done;
+
+	nbytes = error;
+	error = brcmf_sdio_trap_info(bus, &sh, data, count);
+	if (error < 0)
+		goto done;
+
+	error += nbytes;
+	*ppos += error;
+done:
+	up(&bus->sdsem);
+	return error;
+}
+
+static ssize_t brcmf_sdio_forensic_read(struct file *f, char __user *data,
+					size_t count, loff_t *ppos)
+{
+	struct brcmf_sdio *bus = f->private_data;
+	int res;
+
+	res = brcmf_sdbrcm_died_dump(bus, data, count, ppos);
+	if (res > 0)
+		*ppos += res;
+	return (ssize_t)res;
+}
+
+static const struct file_operations brcmf_sdio_forensic_ops = {
+	.owner = THIS_MODULE,
+	.open = simple_open,
+	.read = brcmf_sdio_forensic_read
+};
+
 static void brcmf_sdio_debugfs_create(struct brcmf_sdio *bus)
 {
 	struct brcmf_pub *drvr = bus->sdiodev->bus_if->drvr;
+	struct dentry *dentry = brcmf_debugfs_get_devdir(drvr);
 
+	if (IS_ERR_OR_NULL(dentry))
+		return;
+
+	debugfs_create_file("forensics", S_IRUGO, dentry, bus,
+			    &brcmf_sdio_forensic_ops);
 	brcmf_debugfs_create_sdio_count(drvr, &bus->sdcnt);
 }
 #else
+static int brcmf_sdbrcm_checkdied(struct brcmf_sdio *bus)
+{
+	return 0;
+}
+
 static void brcmf_sdio_debugfs_create(struct brcmf_sdio *bus)
 {
 }
@@ -2991,11 +3318,13 @@ brcmf_sdbrcm_bus_rxctl(struct device *dev, unsigned char *msg, uint msglen)
 			  rxlen, msglen);
 	} else if (timeleft == 0) {
 		brcmf_dbg(ERROR, "resumed on timeout\n");
+		brcmf_sdbrcm_checkdied(bus);
 	} else if (pending) {
 		brcmf_dbg(CTL, "cancelled\n");
 		return -ERESTARTSYS;
 	} else {
 		brcmf_dbg(CTL, "resumed for unknown reason?\n");
+		brcmf_sdbrcm_checkdied(bus);
 	}
 
 	if (rxlen)
@@ -3817,6 +4146,7 @@ static void brcmf_sdbrcm_release_dongle(struct brcmf_sdio *bus)
 static void brcmf_sdbrcm_release(struct brcmf_sdio *bus)
 {
 	brcmf_dbg(TRACE, "Enter\n");
+
 	if (bus) {
 		/* De-register interrupt handler */
 		brcmf_sdio_intr_unregister(bus->sdiodev);
-- 
cgit v1.1


From 5615171c935f41696b5ade3dd27bdf1a579239f2 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Thu, 14 Jun 2012 14:16:27 +0200
Subject: brcm80211: add mailing list address for brcm80211 drivers

Added the mailing list address brcm80211-dev-list@broadcom.com
which can be used to report issues and in bug reports.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 MAINTAINERS | 1 +
 1 file changed, 1 insertion(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 3075a2a..fe6dd3d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1595,6 +1595,7 @@ M:	Arend van Spriel <arend@broadcom.com>
 M:	Franky (Zhenhui) Lin <frankyl@broadcom.com>
 M:	Kan Yan	<kanyan@broadcom.com>
 L:	linux-wireless@vger.kernel.org
+L:	brcm80211-dev-list@broadcom.com
 S:	Supported
 F:	drivers/net/wireless/brcm80211/
 
-- 
cgit v1.1


From a769f9577232afe2c754606a83aad85127e7052a Mon Sep 17 00:00:00 2001
From: Jeongdo Son <sohn9086@gmail.com>
Date: Fri, 15 Jun 2012 02:28:01 +0900
Subject: rt2x00: Add support for BUFFALO WLI-UC-GNM2 to rt2800usb.

This is a RT3070 based device.

Signed-off-by: Jeongdo Son <sohn9086@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800usb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 20a5040..6cf3365 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -971,6 +971,7 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	{ USB_DEVICE(0x0411, 0x015d) },
 	{ USB_DEVICE(0x0411, 0x016f) },
 	{ USB_DEVICE(0x0411, 0x01a2) },
+	{ USB_DEVICE(0x0411, 0x01ee) },
 	/* Corega */
 	{ USB_DEVICE(0x07aa, 0x002f) },
 	{ USB_DEVICE(0x07aa, 0x003c) },
-- 
cgit v1.1


From 35e808b7e4e9ddac1086716867fe686f52fb78ff Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 15 Jun 2012 15:25:19 +0200
Subject: ath9k_hw: remove aniState->noiseFloor

I don't know why somebody decided to keep a cached copy of beacon rssi in a
variable called 'noiseFloor', but the caching is unnecessary and the variable
name is confusing, so let's just get rid of it entirely.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ani.c | 11 ++++-------
 drivers/net/wireless/ath/ath9k/ani.h |  1 -
 2 files changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index b4c77f9..18ce69d 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -266,11 +266,9 @@ static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel)
 	const struct ani_ofdm_level_entry *entry_ofdm;
 	const struct ani_cck_level_entry *entry_cck;
 
-	aniState->noiseFloor = BEACON_RSSI(ah);
-
 	ath_dbg(common, ANI, "**** ofdmlevel %d=>%d, rssi=%d[lo=%d hi=%d]\n",
 		aniState->ofdmNoiseImmunityLevel,
-		immunityLevel, aniState->noiseFloor,
+		immunityLevel, BEACON_RSSI(ah),
 		aniState->rssiThrLow, aniState->rssiThrHigh);
 
 	if (aniState->update_ani)
@@ -292,7 +290,7 @@ static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel)
 				     ATH9K_ANI_FIRSTEP_LEVEL,
 				     entry_ofdm->fir_step_level);
 
-	if ((aniState->noiseFloor >= aniState->rssiThrHigh) &&
+	if (BEACON_RSSI(ah) >= aniState->rssiThrHigh &&
 	    (!aniState->ofdmWeakSigDetectOff !=
 	     entry_ofdm->ofdm_weak_signal_on)) {
 			ath9k_hw_ani_control(ah,
@@ -329,15 +327,14 @@ static void ath9k_hw_set_cck_nil(struct ath_hw *ah, u_int8_t immunityLevel)
 	const struct ani_ofdm_level_entry *entry_ofdm;
 	const struct ani_cck_level_entry *entry_cck;
 
-	aniState->noiseFloor = BEACON_RSSI(ah);
 	ath_dbg(common, ANI, "**** ccklevel %d=>%d, rssi=%d[lo=%d hi=%d]\n",
 		aniState->cckNoiseImmunityLevel, immunityLevel,
-		aniState->noiseFloor, aniState->rssiThrLow,
+		BEACON_RSSI(ah), aniState->rssiThrLow,
 		aniState->rssiThrHigh);
 
 	if ((ah->opmode == NL80211_IFTYPE_STATION ||
 	     ah->opmode == NL80211_IFTYPE_ADHOC) &&
-	    aniState->noiseFloor <= aniState->rssiThrLow &&
+	    BEACON_RSSI(ah) <= aniState->rssiThrLow &&
 	    immunityLevel > ATH9K_ANI_CCK_MAX_LEVEL_LOW_RSSI)
 		immunityLevel = ATH9K_ANI_CCK_MAX_LEVEL_LOW_RSSI;
 
diff --git a/drivers/net/wireless/ath/ath9k/ani.h b/drivers/net/wireless/ath/ath9k/ani.h
index 72e2b87..c04d1677 100644
--- a/drivers/net/wireless/ath/ath9k/ani.h
+++ b/drivers/net/wireless/ath/ath9k/ani.h
@@ -128,7 +128,6 @@ struct ar5416AniState {
 	u32 listenTime;
 	int32_t rssiThrLow;
 	int32_t rssiThrHigh;
-	u32 noiseFloor;
 	u32 ofdmPhyErrCount;
 	u32 cckPhyErrCount;
 	int16_t pktRssi[2];
-- 
cgit v1.1


From 0b81cc3922bce79d0f21189648bf4f9992e9a533 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 15 Jun 2012 15:25:20 +0200
Subject: ath9k_hw: fix OFDM weak signal detection handling

Commit "ath9k_hw: improve ANI processing and rx desensitizing parameters"
was unifying some code related to overriding OFDM weak signal detection,
but seems to have gotten some of the original intent wrong, probably
because of a misnamed variable.

The beacon RSSI is only valid in station mode, and the main reason to check
it in ath9k_hw_set_ofdm_nil is to make sure that OFDM weak signal detection
stays enabled if the RSSI is low, even when the OFDM noise immunity entry
is supposed to disable it.

The above commit removed the mode checks and changed the code so that
OFDM weak signal detection would only be changed if the rssi is high, which
is wrong for everything but client mode.

This patch restores the old behavior in a simplified form.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ani.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index 18ce69d..cf31050 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -265,6 +265,7 @@ static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel)
 	struct ath_common *common = ath9k_hw_common(ah);
 	const struct ani_ofdm_level_entry *entry_ofdm;
 	const struct ani_cck_level_entry *entry_cck;
+	bool weak_sig;
 
 	ath_dbg(common, ANI, "**** ofdmlevel %d=>%d, rssi=%d[lo=%d hi=%d]\n",
 		aniState->ofdmNoiseImmunityLevel,
@@ -290,13 +291,15 @@ static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel)
 				     ATH9K_ANI_FIRSTEP_LEVEL,
 				     entry_ofdm->fir_step_level);
 
-	if (BEACON_RSSI(ah) >= aniState->rssiThrHigh &&
-	    (!aniState->ofdmWeakSigDetectOff !=
-	     entry_ofdm->ofdm_weak_signal_on)) {
+	weak_sig = entry_ofdm->ofdm_weak_signal_on;
+	if (ah->opmode == NL80211_IFTYPE_STATION &&
+	    BEACON_RSSI(ah) <= aniState->rssiThrHigh)
+		weak_sig = true;
+
+	if (!aniState->ofdmWeakSigDetectOff != weak_sig)
 			ath9k_hw_ani_control(ah,
 				ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
 				entry_ofdm->ofdm_weak_signal_on);
-	}
 }
 
 static void ath9k_hw_ani_ofdm_err_trigger(struct ath_hw *ah)
-- 
cgit v1.1


From 7067e7014d7013645f7e866b74814f1e59e6a7cd Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 15 Jun 2012 15:25:21 +0200
Subject: ath9k_hw: remove confusing logic inversion in an ANI variable

Code using this had already triggered smatch complaints, so remove it before
it gets fixed the wrong way.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ani.c        | 17 ++++++++---------
 drivers/net/wireless/ath/ath9k/ani.h        |  2 +-
 drivers/net/wireless/ath/ath9k/ar5008_phy.c | 18 +++++++++---------
 drivers/net/wireless/ath/ath9k/ar9003_phy.c | 10 +++++-----
 4 files changed, 23 insertions(+), 24 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index cf31050..aef8170 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -185,7 +185,7 @@ static void ath9k_hw_ani_ofdm_err_trigger_old(struct ath_hw *ah)
 	}
 	rssi = BEACON_RSSI(ah);
 	if (rssi > aniState->rssiThrHigh) {
-		if (!aniState->ofdmWeakSigDetectOff) {
+		if (aniState->ofdmWeakSigDetect) {
 			if (ath9k_hw_ani_control(ah,
 					 ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
 					 false)) {
@@ -200,7 +200,7 @@ static void ath9k_hw_ani_ofdm_err_trigger_old(struct ath_hw *ah)
 			return;
 		}
 	} else if (rssi > aniState->rssiThrLow) {
-		if (aniState->ofdmWeakSigDetectOff)
+		if (!aniState->ofdmWeakSigDetect)
 			ath9k_hw_ani_control(ah,
 				     ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
 				     true);
@@ -211,7 +211,7 @@ static void ath9k_hw_ani_ofdm_err_trigger_old(struct ath_hw *ah)
 	} else {
 		if ((conf->channel->band == IEEE80211_BAND_2GHZ) &&
 		    !conf_is_ht(conf)) {
-			if (!aniState->ofdmWeakSigDetectOff)
+			if (aniState->ofdmWeakSigDetect)
 				ath9k_hw_ani_control(ah,
 				     ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
 				     false);
@@ -296,7 +296,7 @@ static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel)
 	    BEACON_RSSI(ah) <= aniState->rssiThrHigh)
 		weak_sig = true;
 
-	if (!aniState->ofdmWeakSigDetectOff != weak_sig)
+	if (aniState->ofdmWeakSigDetect != weak_sig)
 			ath9k_hw_ani_control(ah,
 				ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
 				entry_ofdm->ofdm_weak_signal_on);
@@ -401,7 +401,7 @@ static void ath9k_hw_ani_lower_immunity_old(struct ath_hw *ah)
 		if (rssi > aniState->rssiThrHigh) {
 			/* XXX: Handle me */
 		} else if (rssi > aniState->rssiThrLow) {
-			if (aniState->ofdmWeakSigDetectOff) {
+			if (!aniState->ofdmWeakSigDetect) {
 				if (ath9k_hw_ani_control(ah,
 					 ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
 					 true))
@@ -509,9 +509,9 @@ static void ath9k_ani_reset_old(struct ath_hw *ah, bool is_scanning)
 	if (aniState->spurImmunityLevel != 0)
 		ath9k_hw_ani_control(ah, ATH9K_ANI_SPUR_IMMUNITY_LEVEL,
 				     aniState->spurImmunityLevel);
-	if (aniState->ofdmWeakSigDetectOff)
+	if (!aniState->ofdmWeakSigDetect)
 		ath9k_hw_ani_control(ah, ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
-				     !aniState->ofdmWeakSigDetectOff);
+				     aniState->ofdmWeakSigDetect);
 	if (aniState->cckWeakSigThreshold)
 		ath9k_hw_ani_control(ah, ATH9K_ANI_CCK_WEAK_SIGNAL_THR,
 				     aniState->cckWeakSigThreshold);
@@ -887,8 +887,7 @@ void ath9k_hw_ani_init(struct ath_hw *ah)
 
 		ani->rssiThrHigh = ATH9K_ANI_RSSI_THR_HIGH;
 		ani->rssiThrLow = ATH9K_ANI_RSSI_THR_LOW;
-		ani->ofdmWeakSigDetectOff =
-			!ATH9K_ANI_USE_OFDM_WEAK_SIG;
+		ani->ofdmWeakSigDetect = ATH9K_ANI_USE_OFDM_WEAK_SIG;
 		ani->cckNoiseImmunityLevel = ATH9K_ANI_CCK_DEF_LEVEL;
 		ani->ofdmNoiseImmunityLevel = ATH9K_ANI_OFDM_DEF_LEVEL;
 		ani->update_ani = false;
diff --git a/drivers/net/wireless/ath/ath9k/ani.h b/drivers/net/wireless/ath/ath9k/ani.h
index c04d1677..2ed848f 100644
--- a/drivers/net/wireless/ath/ath9k/ani.h
+++ b/drivers/net/wireless/ath/ath9k/ani.h
@@ -122,7 +122,7 @@ struct ar5416AniState {
 	u8 mrcCCKOff;
 	u8 spurImmunityLevel;
 	u8 firstepLevel;
-	u8 ofdmWeakSigDetectOff;
+	u8 ofdmWeakSigDetect;
 	u8 cckWeakSigThreshold;
 	bool update_ani;
 	u32 listenTime;
diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
index c7492c6..d2fb78b 100644
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
@@ -1042,12 +1042,12 @@ static bool ar5008_hw_ani_control_old(struct ath_hw *ah,
 			REG_CLR_BIT(ah, AR_PHY_SFCORR_LOW,
 				    AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW);
 
-		if (!on != aniState->ofdmWeakSigDetectOff) {
+		if (on != aniState->ofdmWeakSigDetect) {
 			if (on)
 				ah->stats.ast_ani_ofdmon++;
 			else
 				ah->stats.ast_ani_ofdmoff++;
-			aniState->ofdmWeakSigDetectOff = !on;
+			aniState->ofdmWeakSigDetect = on;
 		}
 		break;
 	}
@@ -1114,10 +1114,10 @@ static bool ar5008_hw_ani_control_old(struct ath_hw *ah,
 
 	ath_dbg(common, ANI, "ANI parameters:\n");
 	ath_dbg(common, ANI,
-		"noiseImmunityLevel=%d, spurImmunityLevel=%d, ofdmWeakSigDetectOff=%d\n",
+		"noiseImmunityLevel=%d, spurImmunityLevel=%d, ofdmWeakSigDetect=%d\n",
 		aniState->noiseImmunityLevel,
 		aniState->spurImmunityLevel,
-		!aniState->ofdmWeakSigDetectOff);
+		aniState->ofdmWeakSigDetect);
 	ath_dbg(common, ANI,
 		"cckWeakSigThreshold=%d, firstepLevel=%d, listenTime=%d\n",
 		aniState->cckWeakSigThreshold,
@@ -1206,18 +1206,18 @@ static bool ar5008_hw_ani_control_new(struct ath_hw *ah,
 			REG_CLR_BIT(ah, AR_PHY_SFCORR_LOW,
 				    AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW);
 
-		if (!on != aniState->ofdmWeakSigDetectOff) {
+		if (on != aniState->ofdmWeakSigDetect) {
 			ath_dbg(common, ANI,
 				"** ch %d: ofdm weak signal: %s=>%s\n",
 				chan->channel,
-				!aniState->ofdmWeakSigDetectOff ?
+				aniState->ofdmWeakSigDetect ?
 				"on" : "off",
 				on ? "on" : "off");
 			if (on)
 				ah->stats.ast_ani_ofdmon++;
 			else
 				ah->stats.ast_ani_ofdmoff++;
-			aniState->ofdmWeakSigDetectOff = !on;
+			aniState->ofdmWeakSigDetect = on;
 		}
 		break;
 	}
@@ -1367,7 +1367,7 @@ static bool ar5008_hw_ani_control_new(struct ath_hw *ah,
 	ath_dbg(common, ANI,
 		"ANI parameters: SI=%d, ofdmWS=%s FS=%d MRCcck=%s listenTime=%d ofdmErrs=%d cckErrs=%d\n",
 		aniState->spurImmunityLevel,
-		!aniState->ofdmWeakSigDetectOff ? "on" : "off",
+		aniState->ofdmWeakSigDetect ? "on" : "off",
 		aniState->firstepLevel,
 		!aniState->mrcCCKOff ? "on" : "off",
 		aniState->listenTime,
@@ -1456,7 +1456,7 @@ static void ar5008_hw_ani_cache_ini_regs(struct ath_hw *ah)
 	/* these levels just got reset to defaults by the INI */
 	aniState->spurImmunityLevel = ATH9K_ANI_SPUR_IMMUNE_LVL_NEW;
 	aniState->firstepLevel = ATH9K_ANI_FIRSTEP_LVL_NEW;
-	aniState->ofdmWeakSigDetectOff = !ATH9K_ANI_USE_OFDM_WEAK_SIG;
+	aniState->ofdmWeakSigDetect = ATH9K_ANI_USE_OFDM_WEAK_SIG;
 	aniState->mrcCCKOff = true; /* not available on pre AR9003 */
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index d6baf69..bb186d0 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -825,18 +825,18 @@ static bool ar9003_hw_ani_control(struct ath_hw *ah,
 			REG_CLR_BIT(ah, AR_PHY_SFCORR_LOW,
 				    AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW);
 
-		if (!on != aniState->ofdmWeakSigDetectOff) {
+		if (on != aniState->ofdmWeakSigDetect) {
 			ath_dbg(common, ANI,
 				"** ch %d: ofdm weak signal: %s=>%s\n",
 				chan->channel,
-				!aniState->ofdmWeakSigDetectOff ?
+				aniState->ofdmWeakSigDetect ?
 				"on" : "off",
 				on ? "on" : "off");
 			if (on)
 				ah->stats.ast_ani_ofdmon++;
 			else
 				ah->stats.ast_ani_ofdmoff++;
-			aniState->ofdmWeakSigDetectOff = !on;
+			aniState->ofdmWeakSigDetect = on;
 		}
 		break;
 	}
@@ -1002,7 +1002,7 @@ static bool ar9003_hw_ani_control(struct ath_hw *ah,
 	ath_dbg(common, ANI,
 		"ANI parameters: SI=%d, ofdmWS=%s FS=%d MRCcck=%s listenTime=%d ofdmErrs=%d cckErrs=%d\n",
 		aniState->spurImmunityLevel,
-		!aniState->ofdmWeakSigDetectOff ? "on" : "off",
+		aniState->ofdmWeakSigDetect ? "on" : "off",
 		aniState->firstepLevel,
 		!aniState->mrcCCKOff ? "on" : "off",
 		aniState->listenTime,
@@ -1113,7 +1113,7 @@ static void ar9003_hw_ani_cache_ini_regs(struct ath_hw *ah)
 	/* these levels just got reset to defaults by the INI */
 	aniState->spurImmunityLevel = ATH9K_ANI_SPUR_IMMUNE_LVL_NEW;
 	aniState->firstepLevel = ATH9K_ANI_FIRSTEP_LVL_NEW;
-	aniState->ofdmWeakSigDetectOff = !ATH9K_ANI_USE_OFDM_WEAK_SIG;
+	aniState->ofdmWeakSigDetect = ATH9K_ANI_USE_OFDM_WEAK_SIG;
 	aniState->mrcCCKOff = !ATH9K_ANI_ENABLE_MRC_CCK;
 }
 
-- 
cgit v1.1


From 5330df7b178f4f050c67451413020bdd4ec75262 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 15 Jun 2012 15:25:22 +0200
Subject: ath9k_hw: clean up / fix ANI mode checks related to beacon RSSI

Beacon RSSI is only meaningful in station mode - in ad-hoc mode it
fluctuates, depending on which peer last sent a beacon, and in other
modes it is not set at all.
Fix places in ANI where the beacon RSSI is used to limit their use
to station mode only.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ani.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index aef8170..4949d8b 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -176,7 +176,7 @@ static void ath9k_hw_ani_ofdm_err_trigger_old(struct ath_hw *ah)
 		}
 	}
 
-	if (ah->opmode == NL80211_IFTYPE_AP) {
+	if (ah->opmode != NL80211_IFTYPE_STATION) {
 		if (aniState->firstepLevel < HAL_FIRST_STEP_MAX) {
 			ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL,
 					     aniState->firstepLevel + 1);
@@ -236,7 +236,7 @@ static void ath9k_hw_ani_cck_err_trigger_old(struct ath_hw *ah)
 			return;
 		}
 	}
-	if (ah->opmode == NL80211_IFTYPE_AP) {
+	if (ah->opmode != NL80211_IFTYPE_STATION) {
 		if (aniState->firstepLevel < HAL_FIRST_STEP_MAX) {
 			ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL,
 					     aniState->firstepLevel + 1);
@@ -335,8 +335,7 @@ static void ath9k_hw_set_cck_nil(struct ath_hw *ah, u_int8_t immunityLevel)
 		BEACON_RSSI(ah), aniState->rssiThrLow,
 		aniState->rssiThrHigh);
 
-	if ((ah->opmode == NL80211_IFTYPE_STATION ||
-	     ah->opmode == NL80211_IFTYPE_ADHOC) &&
+	if (ah->opmode == NL80211_IFTYPE_STATION &&
 	    BEACON_RSSI(ah) <= aniState->rssiThrLow &&
 	    immunityLevel > ATH9K_ANI_CCK_MAX_LEVEL_LOW_RSSI)
 		immunityLevel = ATH9K_ANI_CCK_MAX_LEVEL_LOW_RSSI;
@@ -390,7 +389,7 @@ static void ath9k_hw_ani_lower_immunity_old(struct ath_hw *ah)
 
 	aniState = &ah->curchan->ani;
 
-	if (ah->opmode == NL80211_IFTYPE_AP) {
+	if (ah->opmode != NL80211_IFTYPE_STATION) {
 		if (aniState->firstepLevel > 0) {
 			if (ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL,
 						 aniState->firstepLevel - 1))
@@ -474,8 +473,7 @@ static void ath9k_ani_reset_old(struct ath_hw *ah, bool is_scanning)
 
 	aniState = &ah->curchan->ani;
 
-	if (ah->opmode != NL80211_IFTYPE_STATION
-	    && ah->opmode != NL80211_IFTYPE_ADHOC) {
+	if (ah->opmode != NL80211_IFTYPE_STATION) {
 		ath_dbg(common, ANI, "Reset ANI state opmode %u\n", ah->opmode);
 		ah->stats.ast_ani_reset++;
 
-- 
cgit v1.1


From 6790ae7a1383db07842b3fd03208dd86f55da57e Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 15 Jun 2012 15:25:23 +0200
Subject: ath9k_hw: remove the old ANI implementation

It was found to be buggy on a variety of chipsets from AR913x to AR928x.
The new version (which was introduced along with AR93xx support) is more
reliable in preventing connectivity dropouts and also fixes MIB interrupt
storm issues.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ani.c        | 332 ++--------------------------
 drivers/net/wireless/ath/ath9k/ar5008_phy.c | 142 +-----------
 drivers/net/wireless/ath/ath9k/ar9002_hw.c  |   4 -
 drivers/net/wireless/ath/ath9k/hw.h         |   9 +-
 4 files changed, 19 insertions(+), 468 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index 4949d8b..175c3f5 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -104,11 +104,6 @@ static const struct ani_cck_level_entry cck_level_table[] = {
 #define ATH9K_ANI_CCK_DEF_LEVEL \
 	2 /* default level - matches the INI settings */
 
-static bool use_new_ani(struct ath_hw *ah)
-{
-	return AR_SREV_9300_20_OR_LATER(ah) || modparam_force_new_ani;
-}
-
 static void ath9k_hw_update_mibstats(struct ath_hw *ah,
 				     struct ath9k_mib_stats *stats)
 {
@@ -131,11 +126,6 @@ static void ath9k_ani_restart(struct ath_hw *ah)
 	aniState = &ah->curchan->ani;
 	aniState->listenTime = 0;
 
-	if (!use_new_ani(ah)) {
-		ofdm_base = AR_PHY_COUNTMAX - ah->config.ofdm_trig_high;
-		cck_base = AR_PHY_COUNTMAX - ah->config.cck_trig_high;
-	}
-
 	ath_dbg(common, ANI, "Writing ofdmbase=%u   cckbase=%u\n",
 		ofdm_base, cck_base);
 
@@ -154,110 +144,6 @@ static void ath9k_ani_restart(struct ath_hw *ah)
 	aniState->cckPhyErrCount = 0;
 }
 
-static void ath9k_hw_ani_ofdm_err_trigger_old(struct ath_hw *ah)
-{
-	struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
-	struct ar5416AniState *aniState;
-	int32_t rssi;
-
-	aniState = &ah->curchan->ani;
-
-	if (aniState->noiseImmunityLevel < HAL_NOISE_IMMUNE_MAX) {
-		if (ath9k_hw_ani_control(ah, ATH9K_ANI_NOISE_IMMUNITY_LEVEL,
-					 aniState->noiseImmunityLevel + 1)) {
-			return;
-		}
-	}
-
-	if (aniState->spurImmunityLevel < HAL_SPUR_IMMUNE_MAX) {
-		if (ath9k_hw_ani_control(ah, ATH9K_ANI_SPUR_IMMUNITY_LEVEL,
-					 aniState->spurImmunityLevel + 1)) {
-			return;
-		}
-	}
-
-	if (ah->opmode != NL80211_IFTYPE_STATION) {
-		if (aniState->firstepLevel < HAL_FIRST_STEP_MAX) {
-			ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL,
-					     aniState->firstepLevel + 1);
-		}
-		return;
-	}
-	rssi = BEACON_RSSI(ah);
-	if (rssi > aniState->rssiThrHigh) {
-		if (aniState->ofdmWeakSigDetect) {
-			if (ath9k_hw_ani_control(ah,
-					 ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
-					 false)) {
-				ath9k_hw_ani_control(ah,
-					ATH9K_ANI_SPUR_IMMUNITY_LEVEL, 0);
-				return;
-			}
-		}
-		if (aniState->firstepLevel < HAL_FIRST_STEP_MAX) {
-			ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL,
-					     aniState->firstepLevel + 1);
-			return;
-		}
-	} else if (rssi > aniState->rssiThrLow) {
-		if (!aniState->ofdmWeakSigDetect)
-			ath9k_hw_ani_control(ah,
-				     ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
-				     true);
-		if (aniState->firstepLevel < HAL_FIRST_STEP_MAX)
-			ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL,
-					     aniState->firstepLevel + 1);
-		return;
-	} else {
-		if ((conf->channel->band == IEEE80211_BAND_2GHZ) &&
-		    !conf_is_ht(conf)) {
-			if (aniState->ofdmWeakSigDetect)
-				ath9k_hw_ani_control(ah,
-				     ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
-				     false);
-			if (aniState->firstepLevel > 0)
-				ath9k_hw_ani_control(ah,
-					     ATH9K_ANI_FIRSTEP_LEVEL, 0);
-			return;
-		}
-	}
-}
-
-static void ath9k_hw_ani_cck_err_trigger_old(struct ath_hw *ah)
-{
-	struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
-	struct ar5416AniState *aniState;
-	int32_t rssi;
-
-	aniState = &ah->curchan->ani;
-	if (aniState->noiseImmunityLevel < HAL_NOISE_IMMUNE_MAX) {
-		if (ath9k_hw_ani_control(ah, ATH9K_ANI_NOISE_IMMUNITY_LEVEL,
-					 aniState->noiseImmunityLevel + 1)) {
-			return;
-		}
-	}
-	if (ah->opmode != NL80211_IFTYPE_STATION) {
-		if (aniState->firstepLevel < HAL_FIRST_STEP_MAX) {
-			ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL,
-					     aniState->firstepLevel + 1);
-		}
-		return;
-	}
-	rssi = BEACON_RSSI(ah);
-	if (rssi > aniState->rssiThrLow) {
-		if (aniState->firstepLevel < HAL_FIRST_STEP_MAX)
-			ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL,
-					     aniState->firstepLevel + 1);
-	} else {
-		if ((conf->channel->band == IEEE80211_BAND_2GHZ) &&
-		    !conf_is_ht(conf)) {
-			if (aniState->firstepLevel > 0)
-				ath9k_hw_ani_control(ah,
-					     ATH9K_ANI_FIRSTEP_LEVEL, 0);
-		}
-	}
-}
-
 /* Adjust the OFDM Noise Immunity Level */
 static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel)
 {
@@ -309,11 +195,6 @@ static void ath9k_hw_ani_ofdm_err_trigger(struct ath_hw *ah)
 	if (!DO_ANI(ah))
 		return;
 
-	if (!use_new_ani(ah)) {
-		ath9k_hw_ani_ofdm_err_trigger_old(ah);
-		return;
-	}
-
 	aniState = &ah->curchan->ani;
 
 	if (aniState->ofdmNoiseImmunityLevel < ATH9K_ANI_OFDM_MAX_LEVEL)
@@ -371,70 +252,12 @@ static void ath9k_hw_ani_cck_err_trigger(struct ath_hw *ah)
 	if (!DO_ANI(ah))
 		return;
 
-	if (!use_new_ani(ah)) {
-		ath9k_hw_ani_cck_err_trigger_old(ah);
-		return;
-	}
-
 	aniState = &ah->curchan->ani;
 
 	if (aniState->cckNoiseImmunityLevel < ATH9K_ANI_CCK_MAX_LEVEL)
 		ath9k_hw_set_cck_nil(ah, aniState->cckNoiseImmunityLevel + 1);
 }
 
-static void ath9k_hw_ani_lower_immunity_old(struct ath_hw *ah)
-{
-	struct ar5416AniState *aniState;
-	int32_t rssi;
-
-	aniState = &ah->curchan->ani;
-
-	if (ah->opmode != NL80211_IFTYPE_STATION) {
-		if (aniState->firstepLevel > 0) {
-			if (ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL,
-						 aniState->firstepLevel - 1))
-				return;
-		}
-	} else {
-		rssi = BEACON_RSSI(ah);
-		if (rssi > aniState->rssiThrHigh) {
-			/* XXX: Handle me */
-		} else if (rssi > aniState->rssiThrLow) {
-			if (!aniState->ofdmWeakSigDetect) {
-				if (ath9k_hw_ani_control(ah,
-					 ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
-					 true))
-					return;
-			}
-			if (aniState->firstepLevel > 0) {
-				if (ath9k_hw_ani_control(ah,
-					 ATH9K_ANI_FIRSTEP_LEVEL,
-					 aniState->firstepLevel - 1))
-					return;
-			}
-		} else {
-			if (aniState->firstepLevel > 0) {
-				if (ath9k_hw_ani_control(ah,
-					 ATH9K_ANI_FIRSTEP_LEVEL,
-					 aniState->firstepLevel - 1))
-					return;
-			}
-		}
-	}
-
-	if (aniState->spurImmunityLevel > 0) {
-		if (ath9k_hw_ani_control(ah, ATH9K_ANI_SPUR_IMMUNITY_LEVEL,
-					 aniState->spurImmunityLevel - 1))
-			return;
-	}
-
-	if (aniState->noiseImmunityLevel > 0) {
-		ath9k_hw_ani_control(ah, ATH9K_ANI_NOISE_IMMUNITY_LEVEL,
-				     aniState->noiseImmunityLevel - 1);
-		return;
-	}
-}
-
 /*
  * only lower either OFDM or CCK errors per turn
  * we lower the other one next time
@@ -445,11 +268,6 @@ static void ath9k_hw_ani_lower_immunity(struct ath_hw *ah)
 
 	aniState = &ah->curchan->ani;
 
-	if (!use_new_ani(ah)) {
-		ath9k_hw_ani_lower_immunity_old(ah);
-		return;
-	}
-
 	/* lower OFDM noise immunity */
 	if (aniState->ofdmNoiseImmunityLevel > 0 &&
 	    (aniState->ofdmsTurn || aniState->cckNoiseImmunityLevel == 0)) {
@@ -462,71 +280,6 @@ static void ath9k_hw_ani_lower_immunity(struct ath_hw *ah)
 		ath9k_hw_set_cck_nil(ah, aniState->cckNoiseImmunityLevel - 1);
 }
 
-static void ath9k_ani_reset_old(struct ath_hw *ah, bool is_scanning)
-{
-	struct ar5416AniState *aniState;
-	struct ath9k_channel *chan = ah->curchan;
-	struct ath_common *common = ath9k_hw_common(ah);
-
-	if (!DO_ANI(ah))
-		return;
-
-	aniState = &ah->curchan->ani;
-
-	if (ah->opmode != NL80211_IFTYPE_STATION) {
-		ath_dbg(common, ANI, "Reset ANI state opmode %u\n", ah->opmode);
-		ah->stats.ast_ani_reset++;
-
-		if (ah->opmode == NL80211_IFTYPE_AP) {
-			/*
-			 * ath9k_hw_ani_control() will only process items set on
-			 * ah->ani_function
-			 */
-			if (IS_CHAN_2GHZ(chan))
-				ah->ani_function = (ATH9K_ANI_SPUR_IMMUNITY_LEVEL |
-						    ATH9K_ANI_FIRSTEP_LEVEL);
-			else
-				ah->ani_function = 0;
-		}
-
-		ath9k_hw_ani_control(ah, ATH9K_ANI_NOISE_IMMUNITY_LEVEL, 0);
-		ath9k_hw_ani_control(ah, ATH9K_ANI_SPUR_IMMUNITY_LEVEL, 0);
-		ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL, 0);
-		ath9k_hw_ani_control(ah, ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
-				     !ATH9K_ANI_USE_OFDM_WEAK_SIG);
-		ath9k_hw_ani_control(ah, ATH9K_ANI_CCK_WEAK_SIGNAL_THR,
-				     ATH9K_ANI_CCK_WEAK_SIG_THR);
-
-		ath9k_ani_restart(ah);
-		return;
-	}
-
-	if (aniState->noiseImmunityLevel != 0)
-		ath9k_hw_ani_control(ah, ATH9K_ANI_NOISE_IMMUNITY_LEVEL,
-				     aniState->noiseImmunityLevel);
-	if (aniState->spurImmunityLevel != 0)
-		ath9k_hw_ani_control(ah, ATH9K_ANI_SPUR_IMMUNITY_LEVEL,
-				     aniState->spurImmunityLevel);
-	if (!aniState->ofdmWeakSigDetect)
-		ath9k_hw_ani_control(ah, ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
-				     aniState->ofdmWeakSigDetect);
-	if (aniState->cckWeakSigThreshold)
-		ath9k_hw_ani_control(ah, ATH9K_ANI_CCK_WEAK_SIGNAL_THR,
-				     aniState->cckWeakSigThreshold);
-	if (aniState->firstepLevel != 0)
-		ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL,
-				     aniState->firstepLevel);
-
-	ath9k_ani_restart(ah);
-
-	ENABLE_REGWRITE_BUFFER(ah);
-
-	REG_WRITE(ah, AR_PHY_ERR_MASK_1, AR_PHY_ERR_OFDM_TIMING);
-	REG_WRITE(ah, AR_PHY_ERR_MASK_2, AR_PHY_ERR_CCK_TIMING);
-
-	REGWRITE_BUFFER_FLUSH(ah);
-}
-
 /*
  * Restore the ANI parameters in the HAL and reset the statistics.
  * This routine should be called for every hardware reset and for
@@ -541,9 +294,6 @@ void ath9k_ani_reset(struct ath_hw *ah, bool is_scanning)
 	if (!DO_ANI(ah))
 		return;
 
-	if (!use_new_ani(ah))
-		return ath9k_ani_reset_old(ah, is_scanning);
-
 	BUG_ON(aniState == NULL);
 	ah->stats.ast_ani_reset++;
 
@@ -640,11 +390,6 @@ static bool ath9k_hw_ani_read_counters(struct ath_hw *ah)
 		return false;
 	}
 
-	if (!use_new_ani(ah)) {
-		ofdm_base = AR_PHY_COUNTMAX - ah->config.ofdm_trig_high;
-		cck_base = AR_PHY_COUNTMAX - ah->config.cck_trig_high;
-	}
-
 	aniState->listenTime += listenTime;
 
 	ath9k_hw_update_mibstats(ah, &ah->ah_mibStats);
@@ -652,26 +397,6 @@ static bool ath9k_hw_ani_read_counters(struct ath_hw *ah)
 	phyCnt1 = REG_READ(ah, AR_PHY_ERR_1);
 	phyCnt2 = REG_READ(ah, AR_PHY_ERR_2);
 
-	if (!use_new_ani(ah) && (phyCnt1 < ofdm_base || phyCnt2 < cck_base)) {
-		if (phyCnt1 < ofdm_base) {
-			ath_dbg(common, ANI,
-				"phyCnt1 0x%x, resetting counter value to 0x%x\n",
-				phyCnt1, ofdm_base);
-			REG_WRITE(ah, AR_PHY_ERR_1, ofdm_base);
-			REG_WRITE(ah, AR_PHY_ERR_MASK_1,
-				  AR_PHY_ERR_OFDM_TIMING);
-		}
-		if (phyCnt2 < cck_base) {
-			ath_dbg(common, ANI,
-				"phyCnt2 0x%x, resetting counter value to 0x%x\n",
-				phyCnt2, cck_base);
-			REG_WRITE(ah, AR_PHY_ERR_2, cck_base);
-			REG_WRITE(ah, AR_PHY_ERR_MASK_2,
-				  AR_PHY_ERR_CCK_TIMING);
-		}
-		return false;
-	}
-
 	ofdmPhyErrCnt = phyCnt1 - ofdm_base;
 	ah->stats.ast_ani_ofdmerrs +=
 		ofdmPhyErrCnt - aniState->ofdmPhyErrCount;
@@ -810,9 +535,6 @@ void ath9k_hw_proc_mib_event(struct ath_hw *ah)
 	if (((phyCnt1 & AR_MIBCNT_INTRMASK) == AR_MIBCNT_INTRMASK) ||
 	    ((phyCnt2 & AR_MIBCNT_INTRMASK) == AR_MIBCNT_INTRMASK)) {
 
-		if (!use_new_ani(ah))
-			ath9k_hw_ani_read_counters(ah);
-
 		/* NB: always restart to insure the h/w counters are reset */
 		ath9k_ani_restart(ah);
 	}
@@ -843,45 +565,28 @@ void ath9k_hw_ani_init(struct ath_hw *ah)
 
 	ath_dbg(common, ANI, "Initialize ANI\n");
 
-	if (use_new_ani(ah)) {
-		ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH_NEW;
-		ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW_NEW;
-
-		ah->config.cck_trig_high = ATH9K_ANI_CCK_TRIG_HIGH_NEW;
-		ah->config.cck_trig_low = ATH9K_ANI_CCK_TRIG_LOW_NEW;
-	} else {
-		ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH_OLD;
-		ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW_OLD;
+	ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH_NEW;
+	ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW_NEW;
 
-		ah->config.cck_trig_high = ATH9K_ANI_CCK_TRIG_HIGH_OLD;
-		ah->config.cck_trig_low = ATH9K_ANI_CCK_TRIG_LOW_OLD;
-	}
+	ah->config.cck_trig_high = ATH9K_ANI_CCK_TRIG_HIGH_NEW;
+	ah->config.cck_trig_low = ATH9K_ANI_CCK_TRIG_LOW_NEW;
 
 	for (i = 0; i < ARRAY_SIZE(ah->channels); i++) {
 		struct ath9k_channel *chan = &ah->channels[i];
 		struct ar5416AniState *ani = &chan->ani;
 
-		if (use_new_ani(ah)) {
-			ani->spurImmunityLevel =
-				ATH9K_ANI_SPUR_IMMUNE_LVL_NEW;
+		ani->spurImmunityLevel =
+			ATH9K_ANI_SPUR_IMMUNE_LVL_NEW;
 
-			ani->firstepLevel = ATH9K_ANI_FIRSTEP_LVL_NEW;
+		ani->firstepLevel = ATH9K_ANI_FIRSTEP_LVL_NEW;
 
-			if (AR_SREV_9300_20_OR_LATER(ah))
-				ani->mrcCCKOff =
-					!ATH9K_ANI_ENABLE_MRC_CCK;
-			else
-				ani->mrcCCKOff = true;
-
-			ani->ofdmsTurn = true;
-		} else {
-			ani->spurImmunityLevel =
-				ATH9K_ANI_SPUR_IMMUNE_LVL_OLD;
-			ani->firstepLevel = ATH9K_ANI_FIRSTEP_LVL_OLD;
-
-			ani->cckWeakSigThreshold =
-				ATH9K_ANI_CCK_WEAK_SIG_THR;
-		}
+		if (AR_SREV_9300_20_OR_LATER(ah))
+			ani->mrcCCKOff =
+				!ATH9K_ANI_ENABLE_MRC_CCK;
+		else
+			ani->mrcCCKOff = true;
+
+		ani->ofdmsTurn = true;
 
 		ani->rssiThrHigh = ATH9K_ANI_RSSI_THR_HIGH;
 		ani->rssiThrLow = ATH9K_ANI_RSSI_THR_LOW;
@@ -895,13 +600,8 @@ void ath9k_hw_ani_init(struct ath_hw *ah)
 	 * since we expect some ongoing maintenance on the tables, let's sanity
 	 * check here default level should not modify INI setting.
 	 */
-	if (use_new_ani(ah)) {
-		ah->aniperiod = ATH9K_ANI_PERIOD_NEW;
-		ah->config.ani_poll_interval = ATH9K_ANI_POLLINTERVAL_NEW;
-	} else {
-		ah->aniperiod = ATH9K_ANI_PERIOD_OLD;
-		ah->config.ani_poll_interval = ATH9K_ANI_POLLINTERVAL_OLD;
-	}
+	ah->aniperiod = ATH9K_ANI_PERIOD_NEW;
+	ah->config.ani_poll_interval = ATH9K_ANI_POLLINTERVAL_NEW;
 
 	if (ah->config.enable_ani)
 		ah->proc_phyerr |= HAL_PROCESS_ANI;
diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
index d2fb78b..736747c 100644
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
@@ -995,141 +995,6 @@ static u32 ar5008_hw_compute_pll_control(struct ath_hw *ah,
 	return pll;
 }
 
-static bool ar5008_hw_ani_control_old(struct ath_hw *ah,
-				      enum ath9k_ani_cmd cmd,
-				      int param)
-{
-	struct ar5416AniState *aniState = &ah->curchan->ani;
-	struct ath_common *common = ath9k_hw_common(ah);
-
-	switch (cmd & ah->ani_function) {
-	case ATH9K_ANI_NOISE_IMMUNITY_LEVEL:{
-		u32 level = param;
-
-		if (level >= ARRAY_SIZE(ah->totalSizeDesired)) {
-			ath_dbg(common, ANI, "level out of range (%u > %zu)\n",
-				level, ARRAY_SIZE(ah->totalSizeDesired));
-			return false;
-		}
-
-		REG_RMW_FIELD(ah, AR_PHY_DESIRED_SZ,
-			      AR_PHY_DESIRED_SZ_TOT_DES,
-			      ah->totalSizeDesired[level]);
-		REG_RMW_FIELD(ah, AR_PHY_AGC_CTL1,
-			      AR_PHY_AGC_CTL1_COARSE_LOW,
-			      ah->coarse_low[level]);
-		REG_RMW_FIELD(ah, AR_PHY_AGC_CTL1,
-			      AR_PHY_AGC_CTL1_COARSE_HIGH,
-			      ah->coarse_high[level]);
-		REG_RMW_FIELD(ah, AR_PHY_FIND_SIG,
-			      AR_PHY_FIND_SIG_FIRPWR,
-			      ah->firpwr[level]);
-
-		if (level > aniState->noiseImmunityLevel)
-			ah->stats.ast_ani_niup++;
-		else if (level < aniState->noiseImmunityLevel)
-			ah->stats.ast_ani_nidown++;
-		aniState->noiseImmunityLevel = level;
-		break;
-	}
-	case ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION:{
-		u32 on = param ? 1 : 0;
-
-		if (on)
-			REG_SET_BIT(ah, AR_PHY_SFCORR_LOW,
-				    AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW);
-		else
-			REG_CLR_BIT(ah, AR_PHY_SFCORR_LOW,
-				    AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW);
-
-		if (on != aniState->ofdmWeakSigDetect) {
-			if (on)
-				ah->stats.ast_ani_ofdmon++;
-			else
-				ah->stats.ast_ani_ofdmoff++;
-			aniState->ofdmWeakSigDetect = on;
-		}
-		break;
-	}
-	case ATH9K_ANI_CCK_WEAK_SIGNAL_THR:{
-		static const int weakSigThrCck[] = { 8, 6 };
-		u32 high = param ? 1 : 0;
-
-		REG_RMW_FIELD(ah, AR_PHY_CCK_DETECT,
-			      AR_PHY_CCK_DETECT_WEAK_SIG_THR_CCK,
-			      weakSigThrCck[high]);
-		if (high != aniState->cckWeakSigThreshold) {
-			if (high)
-				ah->stats.ast_ani_cckhigh++;
-			else
-				ah->stats.ast_ani_ccklow++;
-			aniState->cckWeakSigThreshold = high;
-		}
-		break;
-	}
-	case ATH9K_ANI_FIRSTEP_LEVEL:{
-		static const int firstep[] = { 0, 4, 8 };
-		u32 level = param;
-
-		if (level >= ARRAY_SIZE(firstep)) {
-			ath_dbg(common, ANI, "level out of range (%u > %zu)\n",
-				level, ARRAY_SIZE(firstep));
-			return false;
-		}
-		REG_RMW_FIELD(ah, AR_PHY_FIND_SIG,
-			      AR_PHY_FIND_SIG_FIRSTEP,
-			      firstep[level]);
-		if (level > aniState->firstepLevel)
-			ah->stats.ast_ani_stepup++;
-		else if (level < aniState->firstepLevel)
-			ah->stats.ast_ani_stepdown++;
-		aniState->firstepLevel = level;
-		break;
-	}
-	case ATH9K_ANI_SPUR_IMMUNITY_LEVEL:{
-		static const int cycpwrThr1[] = { 2, 4, 6, 8, 10, 12, 14, 16 };
-		u32 level = param;
-
-		if (level >= ARRAY_SIZE(cycpwrThr1)) {
-			ath_dbg(common, ANI, "level out of range (%u > %zu)\n",
-				level, ARRAY_SIZE(cycpwrThr1));
-			return false;
-		}
-		REG_RMW_FIELD(ah, AR_PHY_TIMING5,
-			      AR_PHY_TIMING5_CYCPWR_THR1,
-			      cycpwrThr1[level]);
-		if (level > aniState->spurImmunityLevel)
-			ah->stats.ast_ani_spurup++;
-		else if (level < aniState->spurImmunityLevel)
-			ah->stats.ast_ani_spurdown++;
-		aniState->spurImmunityLevel = level;
-		break;
-	}
-	case ATH9K_ANI_PRESENT:
-		break;
-	default:
-		ath_dbg(common, ANI, "invalid cmd %u\n", cmd);
-		return false;
-	}
-
-	ath_dbg(common, ANI, "ANI parameters:\n");
-	ath_dbg(common, ANI,
-		"noiseImmunityLevel=%d, spurImmunityLevel=%d, ofdmWeakSigDetect=%d\n",
-		aniState->noiseImmunityLevel,
-		aniState->spurImmunityLevel,
-		aniState->ofdmWeakSigDetect);
-	ath_dbg(common, ANI,
-		"cckWeakSigThreshold=%d, firstepLevel=%d, listenTime=%d\n",
-		aniState->cckWeakSigThreshold,
-		aniState->firstepLevel,
-		aniState->listenTime);
-	ath_dbg(common, ANI, "ofdmPhyErrCount=%d, cckPhyErrCount=%d\n\n",
-		aniState->ofdmPhyErrCount,
-		aniState->cckPhyErrCount);
-
-	return true;
-}
-
 static bool ar5008_hw_ani_control_new(struct ath_hw *ah,
 				      enum ath9k_ani_cmd cmd,
 				      int param)
@@ -1545,11 +1410,8 @@ void ar5008_hw_attach_phy_ops(struct ath_hw *ah)
 	priv_ops->do_getnf = ar5008_hw_do_getnf;
 	priv_ops->set_radar_params = ar5008_hw_set_radar_params;
 
-	if (modparam_force_new_ani) {
-		priv_ops->ani_control = ar5008_hw_ani_control_new;
-		priv_ops->ani_cache_ini_regs = ar5008_hw_ani_cache_ini_regs;
-	} else
-		priv_ops->ani_control = ar5008_hw_ani_control_old;
+	priv_ops->ani_control = ar5008_hw_ani_control_new;
+	priv_ops->ani_cache_ini_regs = ar5008_hw_ani_cache_ini_regs;
 
 	if (AR_SREV_9100(ah) || AR_SREV_9160_10_OR_LATER(ah))
 		priv_ops->compute_pll_control = ar9160_hw_compute_pll_control;
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
index d9a69fc..edf21ea 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
@@ -21,10 +21,6 @@
 #include "ar9002_initvals.h"
 #include "ar9002_phy.h"
 
-int modparam_force_new_ani;
-module_param_named(force_new_ani, modparam_force_new_ani, int, 0444);
-MODULE_PARM_DESC(force_new_ani, "Force new ANI for AR5008, AR9001, AR9002");
-
 /* General hardware code for the A5008/AR9001/AR9002 hadware families */
 
 static void ar9002_hw_init_mode_regs(struct ath_hw *ah)
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 03d5909..111a046 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -1019,14 +1019,7 @@ void ar9002_hw_attach_ops(struct ath_hw *ah);
 void ar9003_hw_attach_ops(struct ath_hw *ah);
 
 void ar9002_hw_load_ani_reg(struct ath_hw *ah, struct ath9k_channel *chan);
-/*
- * ANI work can be shared between all families but a next
- * generation implementation of ANI will be used only for AR9003 only
- * for now as the other families still need to be tested with the same
- * next generation ANI. Feel free to start testing it though for the
- * older families (AR5008, AR9001, AR9002) by using modparam_force_new_ani.
- */
-extern int modparam_force_new_ani;
+
 void ath9k_ani_reset(struct ath_hw *ah, bool is_scanning);
 void ath9k_hw_proc_mib_event(struct ath_hw *ah);
 void ath9k_hw_ani_monitor(struct ath_hw *ah, struct ath9k_channel *chan);
-- 
cgit v1.1


From 465dce62cdb35f49bc0e859fb23787e1229b62a3 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 15 Jun 2012 15:25:24 +0200
Subject: ath9k_hw: clean up defines and variables from the ANI implementation
 split

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ani.c        | 42 +++++++++++------------------
 drivers/net/wireless/ath/ath9k/ani.h        | 24 ++++++-----------
 drivers/net/wireless/ath/ath9k/ar5008_phy.c | 20 +++++++-------
 drivers/net/wireless/ath/ath9k/ar9003_phy.c | 20 +++++++-------
 4 files changed, 43 insertions(+), 63 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index 175c3f5..7d53676 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -117,8 +117,6 @@ static void ath9k_hw_update_mibstats(struct ath_hw *ah,
 static void ath9k_ani_restart(struct ath_hw *ah)
 {
 	struct ar5416AniState *aniState;
-	struct ath_common *common = ath9k_hw_common(ah);
-	u32 ofdm_base = 0, cck_base = 0;
 
 	if (!DO_ANI(ah))
 		return;
@@ -126,13 +124,10 @@ static void ath9k_ani_restart(struct ath_hw *ah)
 	aniState = &ah->curchan->ani;
 	aniState->listenTime = 0;
 
-	ath_dbg(common, ANI, "Writing ofdmbase=%u   cckbase=%u\n",
-		ofdm_base, cck_base);
-
 	ENABLE_REGWRITE_BUFFER(ah);
 
-	REG_WRITE(ah, AR_PHY_ERR_1, ofdm_base);
-	REG_WRITE(ah, AR_PHY_ERR_2, cck_base);
+	REG_WRITE(ah, AR_PHY_ERR_1, 0);
+	REG_WRITE(ah, AR_PHY_ERR_2, 0);
 	REG_WRITE(ah, AR_PHY_ERR_MASK_1, AR_PHY_ERR_OFDM_TIMING);
 	REG_WRITE(ah, AR_PHY_ERR_MASK_2, AR_PHY_ERR_CCK_TIMING);
 
@@ -375,9 +370,6 @@ static bool ath9k_hw_ani_read_counters(struct ath_hw *ah)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
 	struct ar5416AniState *aniState = &ah->curchan->ani;
-	u32 ofdm_base = 0;
-	u32 cck_base = 0;
-	u32 ofdmPhyErrCnt, cckPhyErrCnt;
 	u32 phyCnt1, phyCnt2;
 	int32_t listenTime;
 
@@ -397,15 +389,12 @@ static bool ath9k_hw_ani_read_counters(struct ath_hw *ah)
 	phyCnt1 = REG_READ(ah, AR_PHY_ERR_1);
 	phyCnt2 = REG_READ(ah, AR_PHY_ERR_2);
 
-	ofdmPhyErrCnt = phyCnt1 - ofdm_base;
-	ah->stats.ast_ani_ofdmerrs +=
-		ofdmPhyErrCnt - aniState->ofdmPhyErrCount;
-	aniState->ofdmPhyErrCount = ofdmPhyErrCnt;
+	ah->stats.ast_ani_ofdmerrs += phyCnt1 - aniState->ofdmPhyErrCount;
+	aniState->ofdmPhyErrCount = phyCnt1;
+
+	ah->stats.ast_ani_cckerrs += phyCnt2 - aniState->cckPhyErrCount;
+	aniState->cckPhyErrCount = phyCnt2;
 
-	cckPhyErrCnt = phyCnt2 - cck_base;
-	ah->stats.ast_ani_cckerrs +=
-		cckPhyErrCnt - aniState->cckPhyErrCount;
-	aniState->cckPhyErrCount = cckPhyErrCnt;
 	return true;
 }
 
@@ -565,20 +554,19 @@ void ath9k_hw_ani_init(struct ath_hw *ah)
 
 	ath_dbg(common, ANI, "Initialize ANI\n");
 
-	ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH_NEW;
-	ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW_NEW;
+	ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH;
+	ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW;
 
-	ah->config.cck_trig_high = ATH9K_ANI_CCK_TRIG_HIGH_NEW;
-	ah->config.cck_trig_low = ATH9K_ANI_CCK_TRIG_LOW_NEW;
+	ah->config.cck_trig_high = ATH9K_ANI_CCK_TRIG_HIGH;
+	ah->config.cck_trig_low = ATH9K_ANI_CCK_TRIG_LOW;
 
 	for (i = 0; i < ARRAY_SIZE(ah->channels); i++) {
 		struct ath9k_channel *chan = &ah->channels[i];
 		struct ar5416AniState *ani = &chan->ani;
 
-		ani->spurImmunityLevel =
-			ATH9K_ANI_SPUR_IMMUNE_LVL_NEW;
+		ani->spurImmunityLevel = ATH9K_ANI_SPUR_IMMUNE_LVL;
 
-		ani->firstepLevel = ATH9K_ANI_FIRSTEP_LVL_NEW;
+		ani->firstepLevel = ATH9K_ANI_FIRSTEP_LVL;
 
 		if (AR_SREV_9300_20_OR_LATER(ah))
 			ani->mrcCCKOff =
@@ -600,8 +588,8 @@ void ath9k_hw_ani_init(struct ath_hw *ah)
 	 * since we expect some ongoing maintenance on the tables, let's sanity
 	 * check here default level should not modify INI setting.
 	 */
-	ah->aniperiod = ATH9K_ANI_PERIOD_NEW;
-	ah->config.ani_poll_interval = ATH9K_ANI_POLLINTERVAL_NEW;
+	ah->aniperiod = ATH9K_ANI_PERIOD;
+	ah->config.ani_poll_interval = ATH9K_ANI_POLLINTERVAL;
 
 	if (ah->config.enable_ani)
 		ah->proc_phyerr |= HAL_PROCESS_ANI;
diff --git a/drivers/net/wireless/ath/ath9k/ani.h b/drivers/net/wireless/ath/ath9k/ani.h
index 2ed848f..79c85fc 100644
--- a/drivers/net/wireless/ath/ath9k/ani.h
+++ b/drivers/net/wireless/ath/ath9k/ani.h
@@ -24,42 +24,34 @@
 #define BEACON_RSSI(ahp) (ahp->stats.avgbrssi)
 
 /* units are errors per second */
-#define ATH9K_ANI_OFDM_TRIG_HIGH_OLD      500
-#define ATH9K_ANI_OFDM_TRIG_HIGH_NEW      3500
+#define ATH9K_ANI_OFDM_TRIG_HIGH          3500
 #define ATH9K_ANI_OFDM_TRIG_HIGH_BELOW_INI 1000
 
 /* units are errors per second */
-#define ATH9K_ANI_OFDM_TRIG_LOW_OLD       200
-#define ATH9K_ANI_OFDM_TRIG_LOW_NEW       400
+#define ATH9K_ANI_OFDM_TRIG_LOW           400
 #define ATH9K_ANI_OFDM_TRIG_LOW_ABOVE_INI 900
 
 /* units are errors per second */
-#define ATH9K_ANI_CCK_TRIG_HIGH_OLD       200
-#define ATH9K_ANI_CCK_TRIG_HIGH_NEW       600
+#define ATH9K_ANI_CCK_TRIG_HIGH           600
 
 /* units are errors per second */
-#define ATH9K_ANI_CCK_TRIG_LOW_OLD        100
-#define ATH9K_ANI_CCK_TRIG_LOW_NEW        300
+#define ATH9K_ANI_CCK_TRIG_LOW            300
 
 #define ATH9K_ANI_NOISE_IMMUNE_LVL        4
 #define ATH9K_ANI_USE_OFDM_WEAK_SIG       true
 #define ATH9K_ANI_CCK_WEAK_SIG_THR        false
 
-#define ATH9K_ANI_SPUR_IMMUNE_LVL_OLD     7
-#define ATH9K_ANI_SPUR_IMMUNE_LVL_NEW     3
+#define ATH9K_ANI_SPUR_IMMUNE_LVL         3
 
-#define ATH9K_ANI_FIRSTEP_LVL_OLD         0
-#define ATH9K_ANI_FIRSTEP_LVL_NEW         2
+#define ATH9K_ANI_FIRSTEP_LVL             2
 
 #define ATH9K_ANI_RSSI_THR_HIGH           40
 #define ATH9K_ANI_RSSI_THR_LOW            7
 
-#define ATH9K_ANI_PERIOD_OLD              100
-#define ATH9K_ANI_PERIOD_NEW              300
+#define ATH9K_ANI_PERIOD                  300
 
 /* in ms */
-#define ATH9K_ANI_POLLINTERVAL_OLD        100
-#define ATH9K_ANI_POLLINTERVAL_NEW        1000
+#define ATH9K_ANI_POLLINTERVAL            1000
 
 #define HAL_NOISE_IMMUNE_MAX              4
 #define HAL_SPUR_IMMUNE_MAX               7
diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
index 736747c..b6efcd9 100644
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
@@ -1101,7 +1101,7 @@ static bool ar5008_hw_ani_control_new(struct ath_hw *ah,
 		 * from INI file & cap value
 		 */
 		value = firstep_table[level] -
-			firstep_table[ATH9K_ANI_FIRSTEP_LVL_NEW] +
+			firstep_table[ATH9K_ANI_FIRSTEP_LVL] +
 			aniState->iniDef.firstep;
 		if (value < ATH9K_SIG_FIRSTEP_SETTING_MIN)
 			value = ATH9K_SIG_FIRSTEP_SETTING_MIN;
@@ -1116,7 +1116,7 @@ static bool ar5008_hw_ani_control_new(struct ath_hw *ah,
 		 * from INI file & cap value
 		 */
 		value2 = firstep_table[level] -
-			 firstep_table[ATH9K_ANI_FIRSTEP_LVL_NEW] +
+			 firstep_table[ATH9K_ANI_FIRSTEP_LVL] +
 			 aniState->iniDef.firstepLow;
 		if (value2 < ATH9K_SIG_FIRSTEP_SETTING_MIN)
 			value2 = ATH9K_SIG_FIRSTEP_SETTING_MIN;
@@ -1132,7 +1132,7 @@ static bool ar5008_hw_ani_control_new(struct ath_hw *ah,
 				chan->channel,
 				aniState->firstepLevel,
 				level,
-				ATH9K_ANI_FIRSTEP_LVL_NEW,
+				ATH9K_ANI_FIRSTEP_LVL,
 				value,
 				aniState->iniDef.firstep);
 			ath_dbg(common, ANI,
@@ -1140,7 +1140,7 @@ static bool ar5008_hw_ani_control_new(struct ath_hw *ah,
 				chan->channel,
 				aniState->firstepLevel,
 				level,
-				ATH9K_ANI_FIRSTEP_LVL_NEW,
+				ATH9K_ANI_FIRSTEP_LVL,
 				value2,
 				aniState->iniDef.firstepLow);
 			if (level > aniState->firstepLevel)
@@ -1165,7 +1165,7 @@ static bool ar5008_hw_ani_control_new(struct ath_hw *ah,
 		 * from INI file & cap value
 		 */
 		value = cycpwrThr1_table[level] -
-			cycpwrThr1_table[ATH9K_ANI_SPUR_IMMUNE_LVL_NEW] +
+			cycpwrThr1_table[ATH9K_ANI_SPUR_IMMUNE_LVL] +
 			aniState->iniDef.cycpwrThr1;
 		if (value < ATH9K_SIG_SPUR_IMM_SETTING_MIN)
 			value = ATH9K_SIG_SPUR_IMM_SETTING_MIN;
@@ -1181,7 +1181,7 @@ static bool ar5008_hw_ani_control_new(struct ath_hw *ah,
 		 * from INI file & cap value
 		 */
 		value2 = cycpwrThr1_table[level] -
-			 cycpwrThr1_table[ATH9K_ANI_SPUR_IMMUNE_LVL_NEW] +
+			 cycpwrThr1_table[ATH9K_ANI_SPUR_IMMUNE_LVL] +
 			 aniState->iniDef.cycpwrThr1Ext;
 		if (value2 < ATH9K_SIG_SPUR_IMM_SETTING_MIN)
 			value2 = ATH9K_SIG_SPUR_IMM_SETTING_MIN;
@@ -1196,7 +1196,7 @@ static bool ar5008_hw_ani_control_new(struct ath_hw *ah,
 				chan->channel,
 				aniState->spurImmunityLevel,
 				level,
-				ATH9K_ANI_SPUR_IMMUNE_LVL_NEW,
+				ATH9K_ANI_SPUR_IMMUNE_LVL,
 				value,
 				aniState->iniDef.cycpwrThr1);
 			ath_dbg(common, ANI,
@@ -1204,7 +1204,7 @@ static bool ar5008_hw_ani_control_new(struct ath_hw *ah,
 				chan->channel,
 				aniState->spurImmunityLevel,
 				level,
-				ATH9K_ANI_SPUR_IMMUNE_LVL_NEW,
+				ATH9K_ANI_SPUR_IMMUNE_LVL,
 				value2,
 				aniState->iniDef.cycpwrThr1Ext);
 			if (level > aniState->spurImmunityLevel)
@@ -1319,8 +1319,8 @@ static void ar5008_hw_ani_cache_ini_regs(struct ath_hw *ah)
 					       AR_PHY_EXT_TIMING5_CYCPWR_THR1);
 
 	/* these levels just got reset to defaults by the INI */
-	aniState->spurImmunityLevel = ATH9K_ANI_SPUR_IMMUNE_LVL_NEW;
-	aniState->firstepLevel = ATH9K_ANI_FIRSTEP_LVL_NEW;
+	aniState->spurImmunityLevel = ATH9K_ANI_SPUR_IMMUNE_LVL;
+	aniState->firstepLevel = ATH9K_ANI_FIRSTEP_LVL;
 	aniState->ofdmWeakSigDetect = ATH9K_ANI_USE_OFDM_WEAK_SIG;
 	aniState->mrcCCKOff = true; /* not available on pre AR9003 */
 }
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index bb186d0..ec8a8d5 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -855,7 +855,7 @@ static bool ar9003_hw_ani_control(struct ath_hw *ah,
 		 * from INI file & cap value
 		 */
 		value = firstep_table[level] -
-			firstep_table[ATH9K_ANI_FIRSTEP_LVL_NEW] +
+			firstep_table[ATH9K_ANI_FIRSTEP_LVL] +
 			aniState->iniDef.firstep;
 		if (value < ATH9K_SIG_FIRSTEP_SETTING_MIN)
 			value = ATH9K_SIG_FIRSTEP_SETTING_MIN;
@@ -870,7 +870,7 @@ static bool ar9003_hw_ani_control(struct ath_hw *ah,
 		 * from INI file & cap value
 		 */
 		value2 = firstep_table[level] -
-			 firstep_table[ATH9K_ANI_FIRSTEP_LVL_NEW] +
+			 firstep_table[ATH9K_ANI_FIRSTEP_LVL] +
 			 aniState->iniDef.firstepLow;
 		if (value2 < ATH9K_SIG_FIRSTEP_SETTING_MIN)
 			value2 = ATH9K_SIG_FIRSTEP_SETTING_MIN;
@@ -886,7 +886,7 @@ static bool ar9003_hw_ani_control(struct ath_hw *ah,
 				chan->channel,
 				aniState->firstepLevel,
 				level,
-				ATH9K_ANI_FIRSTEP_LVL_NEW,
+				ATH9K_ANI_FIRSTEP_LVL,
 				value,
 				aniState->iniDef.firstep);
 			ath_dbg(common, ANI,
@@ -894,7 +894,7 @@ static bool ar9003_hw_ani_control(struct ath_hw *ah,
 				chan->channel,
 				aniState->firstepLevel,
 				level,
-				ATH9K_ANI_FIRSTEP_LVL_NEW,
+				ATH9K_ANI_FIRSTEP_LVL,
 				value2,
 				aniState->iniDef.firstepLow);
 			if (level > aniState->firstepLevel)
@@ -919,7 +919,7 @@ static bool ar9003_hw_ani_control(struct ath_hw *ah,
 		 * from INI file & cap value
 		 */
 		value = cycpwrThr1_table[level] -
-			cycpwrThr1_table[ATH9K_ANI_SPUR_IMMUNE_LVL_NEW] +
+			cycpwrThr1_table[ATH9K_ANI_SPUR_IMMUNE_LVL] +
 			aniState->iniDef.cycpwrThr1;
 		if (value < ATH9K_SIG_SPUR_IMM_SETTING_MIN)
 			value = ATH9K_SIG_SPUR_IMM_SETTING_MIN;
@@ -935,7 +935,7 @@ static bool ar9003_hw_ani_control(struct ath_hw *ah,
 		 * from INI file & cap value
 		 */
 		value2 = cycpwrThr1_table[level] -
-			 cycpwrThr1_table[ATH9K_ANI_SPUR_IMMUNE_LVL_NEW] +
+			 cycpwrThr1_table[ATH9K_ANI_SPUR_IMMUNE_LVL] +
 			 aniState->iniDef.cycpwrThr1Ext;
 		if (value2 < ATH9K_SIG_SPUR_IMM_SETTING_MIN)
 			value2 = ATH9K_SIG_SPUR_IMM_SETTING_MIN;
@@ -950,7 +950,7 @@ static bool ar9003_hw_ani_control(struct ath_hw *ah,
 				chan->channel,
 				aniState->spurImmunityLevel,
 				level,
-				ATH9K_ANI_SPUR_IMMUNE_LVL_NEW,
+				ATH9K_ANI_SPUR_IMMUNE_LVL,
 				value,
 				aniState->iniDef.cycpwrThr1);
 			ath_dbg(common, ANI,
@@ -958,7 +958,7 @@ static bool ar9003_hw_ani_control(struct ath_hw *ah,
 				chan->channel,
 				aniState->spurImmunityLevel,
 				level,
-				ATH9K_ANI_SPUR_IMMUNE_LVL_NEW,
+				ATH9K_ANI_SPUR_IMMUNE_LVL,
 				value2,
 				aniState->iniDef.cycpwrThr1Ext);
 			if (level > aniState->spurImmunityLevel)
@@ -1111,8 +1111,8 @@ static void ar9003_hw_ani_cache_ini_regs(struct ath_hw *ah)
 					       AR_PHY_EXT_CYCPWR_THR1);
 
 	/* these levels just got reset to defaults by the INI */
-	aniState->spurImmunityLevel = ATH9K_ANI_SPUR_IMMUNE_LVL_NEW;
-	aniState->firstepLevel = ATH9K_ANI_FIRSTEP_LVL_NEW;
+	aniState->spurImmunityLevel = ATH9K_ANI_SPUR_IMMUNE_LVL;
+	aniState->firstepLevel = ATH9K_ANI_FIRSTEP_LVL;
 	aniState->ofdmWeakSigDetect = ATH9K_ANI_USE_OFDM_WEAK_SIG;
 	aniState->mrcCCKOff = !ATH9K_ANI_ENABLE_MRC_CCK;
 }
-- 
cgit v1.1


From 198823fd002a7f9784648c24c72b7e8c9e73fd14 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 15 Jun 2012 15:25:25 +0200
Subject: ath9k: remove MIB interrupt support

The new ANI implementation does not need it

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ani.c   | 40 ----------------------------------
 drivers/net/wireless/ath/ath9k/debug.c |  2 --
 drivers/net/wireless/ath/ath9k/hw.h    |  1 -
 drivers/net/wireless/ath/ath9k/main.c  | 26 ++--------------------
 4 files changed, 2 insertions(+), 67 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index 7d53676..da73fa2 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -490,46 +490,6 @@ void ath9k_hw_disable_mib_counters(struct ath_hw *ah)
 }
 EXPORT_SYMBOL(ath9k_hw_disable_mib_counters);
 
-/*
- * Process a MIB interrupt.  We may potentially be invoked because
- * any of the MIB counters overflow/trigger so don't assume we're
- * here because a PHY error counter triggered.
- */
-void ath9k_hw_proc_mib_event(struct ath_hw *ah)
-{
-	u32 phyCnt1, phyCnt2;
-
-	/* Reset these counters regardless */
-	REG_WRITE(ah, AR_FILT_OFDM, 0);
-	REG_WRITE(ah, AR_FILT_CCK, 0);
-	if (!(REG_READ(ah, AR_SLP_MIB_CTRL) & AR_SLP_MIB_PENDING))
-		REG_WRITE(ah, AR_SLP_MIB_CTRL, AR_SLP_MIB_CLEAR);
-
-	/* Clear the mib counters and save them in the stats */
-	ath9k_hw_update_mibstats(ah, &ah->ah_mibStats);
-
-	if (!DO_ANI(ah)) {
-		/*
-		 * We must always clear the interrupt cause by
-		 * resetting the phy error regs.
-		 */
-		REG_WRITE(ah, AR_PHY_ERR_1, 0);
-		REG_WRITE(ah, AR_PHY_ERR_2, 0);
-		return;
-	}
-
-	/* NB: these are not reset-on-read */
-	phyCnt1 = REG_READ(ah, AR_PHY_ERR_1);
-	phyCnt2 = REG_READ(ah, AR_PHY_ERR_2);
-	if (((phyCnt1 & AR_MIBCNT_INTRMASK) == AR_MIBCNT_INTRMASK) ||
-	    ((phyCnt2 & AR_MIBCNT_INTRMASK) == AR_MIBCNT_INTRMASK)) {
-
-		/* NB: always restart to insure the h/w counters are reset */
-		ath9k_ani_restart(ah);
-	}
-}
-EXPORT_SYMBOL(ath9k_hw_proc_mib_event);
-
 void ath9k_hw_ani_setup(struct ath_hw *ah)
 {
 	int i;
diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index 2831258..5c3192f 100644
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -348,8 +348,6 @@ void ath_debug_stat_interrupt(struct ath_softc *sc, enum ath9k_int status)
 		sc->debug.stats.istats.txok++;
 	if (status & ATH9K_INT_TXURN)
 		sc->debug.stats.istats.txurn++;
-	if (status & ATH9K_INT_MIB)
-		sc->debug.stats.istats.mib++;
 	if (status & ATH9K_INT_RXPHY)
 		sc->debug.stats.istats.rxphyerr++;
 	if (status & ATH9K_INT_RXKCM)
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 111a046..b49e4b4 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -1021,7 +1021,6 @@ void ar9003_hw_attach_ops(struct ath_hw *ah);
 void ar9002_hw_load_ani_reg(struct ath_hw *ah, struct ath9k_channel *chan);
 
 void ath9k_ani_reset(struct ath_hw *ah, bool is_scanning);
-void ath9k_hw_proc_mib_event(struct ath_hw *ah);
 void ath9k_hw_ani_monitor(struct ath_hw *ah, struct ath9k_channel *chan);
 
 #ifdef CONFIG_ATH9K_BTCOEX_SUPPORT
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 52561b3..85f9ab4 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -516,24 +516,6 @@ irqreturn_t ath_isr(int irq, void *dev)
 		ath9k_hw_set_interrupts(ah);
 	}
 
-	if (status & ATH9K_INT_MIB) {
-		/*
-		 * Disable interrupts until we service the MIB
-		 * interrupt; otherwise it will continue to
-		 * fire.
-		 */
-		ath9k_hw_disable_interrupts(ah);
-		/*
-		 * Let the hal handle the event. We assume
-		 * it will clear whatever condition caused
-		 * the interrupt.
-		 */
-		spin_lock(&common->cc_lock);
-		ath9k_hw_proc_mib_event(ah);
-		spin_unlock(&common->cc_lock);
-		ath9k_hw_enable_interrupts(ah);
-	}
-
 	if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
 		if (status & ATH9K_INT_TIM_TIMER) {
 			if (ATH_DBG_WARN_ON_ONCE(sc->ps_idle))
@@ -959,14 +941,10 @@ static void ath9k_calculate_summary_state(struct ieee80211_hw *hw,
 	/*
 	 * Enable MIB interrupts when there are hardware phy counters.
 	 */
-	if ((iter_data.nstations + iter_data.nadhocs + iter_data.nmeshes) > 0) {
-		if (ah->config.enable_ani)
-			ah->imask |= ATH9K_INT_MIB;
+	if ((iter_data.nstations + iter_data.nadhocs + iter_data.nmeshes) > 0)
 		ah->imask |= ATH9K_INT_TSFOOR;
-	} else {
-		ah->imask &= ~ATH9K_INT_MIB;
+	else
 		ah->imask &= ~ATH9K_INT_TSFOOR;
-	}
 
 	ath9k_hw_set_interrupts(ah);
 
-- 
cgit v1.1


From 1e8f0a317b5774b2856cd8824991324efb353963 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 15 Jun 2012 15:25:26 +0200
Subject: ath9k_hw: fix setting lower noise immunity values

Commit af1e8a6f "ath9k: reset noiseimmunity level to default" was supposed
to ensure that the default noise immunity level is above the INI
values, however it prevents setting lower noise immunity values altogether.
Fix this by moving the checks to the right function.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ani.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index da73fa2..6ee0875 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -154,9 +154,7 @@ static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel)
 		aniState->rssiThrLow, aniState->rssiThrHigh);
 
 	if (aniState->update_ani)
-		aniState->ofdmNoiseImmunityLevel =
-			(immunityLevel > ATH9K_ANI_OFDM_DEF_LEVEL) ?
-			immunityLevel : ATH9K_ANI_OFDM_DEF_LEVEL;
+		aniState->ofdmNoiseImmunityLevel = immunityLevel;
 
 	entry_ofdm = &ofdm_level_table[aniState->ofdmNoiseImmunityLevel];
 	entry_cck = &cck_level_table[aniState->cckNoiseImmunityLevel];
@@ -217,9 +215,7 @@ static void ath9k_hw_set_cck_nil(struct ath_hw *ah, u_int8_t immunityLevel)
 		immunityLevel = ATH9K_ANI_CCK_MAX_LEVEL_LOW_RSSI;
 
 	if (aniState->update_ani)
-		aniState->cckNoiseImmunityLevel =
-			(immunityLevel > ATH9K_ANI_CCK_DEF_LEVEL) ?
-			immunityLevel : ATH9K_ANI_CCK_DEF_LEVEL;
+		aniState->cckNoiseImmunityLevel = immunityLevel;
 
 	entry_ofdm = &ofdm_level_table[aniState->ofdmNoiseImmunityLevel];
 	entry_cck = &cck_level_table[aniState->cckNoiseImmunityLevel];
@@ -285,6 +281,7 @@ void ath9k_ani_reset(struct ath_hw *ah, bool is_scanning)
 	struct ar5416AniState *aniState = &ah->curchan->ani;
 	struct ath9k_channel *chan = ah->curchan;
 	struct ath_common *common = ath9k_hw_common(ah);
+	int ofdm_nil, cck_nil;
 
 	if (!DO_ANI(ah))
 		return;
@@ -306,6 +303,11 @@ void ath9k_ani_reset(struct ath_hw *ah, bool is_scanning)
 	/* always allow mode (on/off) to be controlled */
 	ah->ani_function |= ATH9K_ANI_MODE;
 
+	ofdm_nil = max_t(int, ATH9K_ANI_OFDM_DEF_LEVEL,
+			 aniState->ofdmNoiseImmunityLevel);
+	cck_nil = max_t(int, ATH9K_ANI_CCK_DEF_LEVEL,
+			 aniState->cckNoiseImmunityLevel);
+
 	if (is_scanning ||
 	    (ah->opmode != NL80211_IFTYPE_STATION &&
 	     ah->opmode != NL80211_IFTYPE_ADHOC)) {
@@ -329,8 +331,8 @@ void ath9k_ani_reset(struct ath_hw *ah, bool is_scanning)
 				aniState->cckNoiseImmunityLevel);
 
 			aniState->update_ani = false;
-			ath9k_hw_set_ofdm_nil(ah, ATH9K_ANI_OFDM_DEF_LEVEL);
-			ath9k_hw_set_cck_nil(ah, ATH9K_ANI_CCK_DEF_LEVEL);
+			ofdm_nil = ATH9K_ANI_OFDM_DEF_LEVEL;
+			cck_nil = ATH9K_ANI_CCK_DEF_LEVEL;
 		}
 	} else {
 		/*
@@ -346,11 +348,9 @@ void ath9k_ani_reset(struct ath_hw *ah, bool is_scanning)
 			aniState->cckNoiseImmunityLevel);
 
 			aniState->update_ani = true;
-			ath9k_hw_set_ofdm_nil(ah,
-					      aniState->ofdmNoiseImmunityLevel);
-			ath9k_hw_set_cck_nil(ah,
-					     aniState->cckNoiseImmunityLevel);
 	}
+	ath9k_hw_set_ofdm_nil(ah, ofdm_nil);
+	ath9k_hw_set_cck_nil(ah, cck_nil);
 
 	/*
 	 * enable phy counters if hw supports or if not, enable phy
-- 
cgit v1.1


From 058a6385cb876d4b1b97610ee4e73a845e7bea71 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 15 Jun 2012 15:25:27 +0200
Subject: ath9k_hw: clean up ANI OFDM trigger handling

Adjust ah->config.ofdm_trig_{high,low} when setting noise immunity values
to simplify threshold checks in ath9k_hw_ani_monitor

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ani.c | 23 ++++++++++-------------
 1 file changed, 10 insertions(+), 13 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index 6ee0875..a90aa0b 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -179,6 +179,14 @@ static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel)
 			ath9k_hw_ani_control(ah,
 				ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
 				entry_ofdm->ofdm_weak_signal_on);
+
+	if (aniState->ofdmNoiseImmunityLevel >= ATH9K_ANI_OFDM_DEF_LEVEL) {
+		ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH;
+		ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW_ABOVE_INI;
+	} else {
+		ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH_BELOW_INI;
+		ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW;
+	}
 }
 
 static void ath9k_hw_ani_ofdm_err_trigger(struct ath_hw *ah)
@@ -428,21 +436,10 @@ void ath9k_hw_ani_monitor(struct ath_hw *ah, struct ath9k_channel *chan)
 
 	if (aniState->listenTime > ah->aniperiod) {
 		if (cckPhyErrRate < ah->config.cck_trig_low &&
-		    ((ofdmPhyErrRate < ah->config.ofdm_trig_low &&
-		      aniState->ofdmNoiseImmunityLevel <
-		      ATH9K_ANI_OFDM_DEF_LEVEL) ||
-		     (ofdmPhyErrRate < ATH9K_ANI_OFDM_TRIG_LOW_ABOVE_INI &&
-		      aniState->ofdmNoiseImmunityLevel >=
-		      ATH9K_ANI_OFDM_DEF_LEVEL))) {
+		    ofdmPhyErrRate < ah->config.ofdm_trig_low) {
 			ath9k_hw_ani_lower_immunity(ah);
 			aniState->ofdmsTurn = !aniState->ofdmsTurn;
-		} else if ((ofdmPhyErrRate > ah->config.ofdm_trig_high &&
-			    aniState->ofdmNoiseImmunityLevel >=
-			    ATH9K_ANI_OFDM_DEF_LEVEL) ||
-			   (ofdmPhyErrRate >
-			    ATH9K_ANI_OFDM_TRIG_HIGH_BELOW_INI &&
-			    aniState->ofdmNoiseImmunityLevel <
-			    ATH9K_ANI_OFDM_DEF_LEVEL)) {
+		} else if (ofdmPhyErrRate > ah->config.ofdm_trig_high) {
 			ath9k_hw_ani_ofdm_err_trigger(ah);
 			aniState->ofdmsTurn = false;
 		} else if (cckPhyErrRate > ah->config.cck_trig_high) {
-- 
cgit v1.1


From 29a6b508569cc1d04884d3140ccb5973dd7d91fa Mon Sep 17 00:00:00 2001
From: Xose Vazquez Perez <xose.vazquez@gmail.com>
Date: Fri, 15 Jun 2012 17:27:05 +0200
Subject: wireless: rtl818x: rtl8180 add devices ids

from windows driver:
0x1186, 0x3301 D-Link Air DWL-510 Wireless PCI Adapter
0x1432, 0x7106 LevelOne WPC-0101 11Mbps Wireless PCMCIA CardBus Adapter

Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 2bebcb7..3b50539 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -47,6 +47,8 @@ static DEFINE_PCI_DEVICE_TABLE(rtl8180_table) = {
 	{ PCI_DEVICE(0x1799, 0x6001) },
 	{ PCI_DEVICE(0x1799, 0x6020) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x3300) },
+	{ PCI_DEVICE(0x1186, 0x3301) },
+	{ PCI_DEVICE(0x1432, 0x7106) },
 	{ }
 };
 
-- 
cgit v1.1


From 0abd79e5a87319f0710c8db2ef2a2c5c6479c32b Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Fri, 15 Jun 2012 12:21:51 -0700
Subject: mwifiex: set channel via start_ap handler for AP interface

This patch adds functionality to set channel info received from
cfg80211_ap_settings in start_ap handler.

Since set_channel cfg80211 handler has been removed and we need
not explicitely call mwifiex_uap_set_channel(); hence this
function definition is also removed.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cfg80211.c | 23 +++++++++++++++++------
 drivers/net/wireless/mwifiex/main.h     |  1 -
 drivers/net/wireless/mwifiex/uap_cmd.c  | 30 ------------------------------
 3 files changed, 17 insertions(+), 37 deletions(-)

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 015fec3..7b4eaf4 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -384,13 +384,13 @@ mwifiex_set_rf_channel(struct mwifiex_private *priv,
 	cfp.freq = chan->center_freq;
 	cfp.channel = ieee80211_frequency_to_channel(chan->center_freq);
 
-	if (mwifiex_bss_set_channel(priv, &cfp))
-		return -EFAULT;
-
-	if (priv->bss_type == MWIFIEX_BSS_TYPE_STA)
+	if (priv->bss_type == MWIFIEX_BSS_TYPE_STA) {
+		if (mwifiex_bss_set_channel(priv, &cfp))
+			return -EFAULT;
 		return mwifiex_drv_change_adhoc_chan(priv, cfp.channel);
-	else
-		return mwifiex_uap_set_channel(priv, cfp.channel);
+	}
+
+	return 0;
 }
 
 /*
@@ -961,6 +961,17 @@ static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy,
 		return -EINVAL;
 	}
 
+	bss_cfg->channel =
+	    (u8)ieee80211_frequency_to_channel(params->channel->center_freq);
+	bss_cfg->band_cfg = BAND_CONFIG_MANUAL;
+
+	if (mwifiex_set_rf_channel(priv, params->channel,
+				   params->channel_type)) {
+		kfree(bss_cfg);
+		wiphy_err(wiphy, "Failed to set band config information!\n");
+		return -1;
+	}
+
 	if (mwifiex_set_secure_params(priv, bss_cfg, params)) {
 		kfree(bss_cfg);
 		wiphy_err(wiphy, "Failed to parse secuirty parameters!\n");
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 5b32221..512481e 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -990,7 +990,6 @@ int mwifiex_set_tx_power(struct mwifiex_private *priv,
 
 int mwifiex_main_process(struct mwifiex_adapter *);
 
-int mwifiex_uap_set_channel(struct mwifiex_private *priv, int channel);
 int mwifiex_bss_set_channel(struct mwifiex_private *,
 			    struct mwifiex_chan_freq_power *cfp);
 int mwifiex_get_bss_info(struct mwifiex_private *,
diff --git a/drivers/net/wireless/mwifiex/uap_cmd.c b/drivers/net/wireless/mwifiex/uap_cmd.c
index 89f9a2a..fb0c6cb 100644
--- a/drivers/net/wireless/mwifiex/uap_cmd.c
+++ b/drivers/net/wireless/mwifiex/uap_cmd.c
@@ -421,33 +421,3 @@ int mwifiex_uap_prepare_cmd(struct mwifiex_private *priv, u16 cmd_no,
 
 	return 0;
 }
-
-/* This function sets the RF channel for AP.
- *
- * This function populates channel information in AP config structure
- * and sends command to configure channel information in AP.
- */
-int mwifiex_uap_set_channel(struct mwifiex_private *priv, int channel)
-{
-	struct mwifiex_uap_bss_param *bss_cfg;
-	struct wiphy *wiphy = priv->wdev->wiphy;
-
-	bss_cfg = kzalloc(sizeof(struct mwifiex_uap_bss_param), GFP_KERNEL);
-	if (!bss_cfg)
-		return -ENOMEM;
-
-	mwifiex_set_sys_config_invalid_data(bss_cfg);
-	bss_cfg->band_cfg = BAND_CONFIG_MANUAL;
-	bss_cfg->channel = channel;
-
-	if (mwifiex_send_cmd_async(priv, HostCmd_CMD_UAP_SYS_CONFIG,
-				   HostCmd_ACT_GEN_SET,
-				   UAP_BSS_PARAMS_I, bss_cfg)) {
-		wiphy_err(wiphy, "Failed to set the uAP channel\n");
-		kfree(bss_cfg);
-		return -1;
-	}
-
-	kfree(bss_cfg);
-	return 0;
-}
-- 
cgit v1.1


From 2228125600b3031657b825502d1a1999e4c02566 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Fri, 15 Jun 2012 12:21:53 -0700
Subject: mwifiex: set HT capability based on cfg80211_ap_settings

Parse HT IE from cfg80211 and set HT capabilities accordingly
to FW. If HT IE is missing, 11n would be disabled in FW.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cfg80211.c |  2 ++
 drivers/net/wireless/mwifiex/fw.h       |  6 +++++
 drivers/net/wireless/mwifiex/ioctl.h    |  1 +
 drivers/net/wireless/mwifiex/main.h     |  3 +++
 drivers/net/wireless/mwifiex/uap_cmd.c  | 47 +++++++++++++++++++++++++++++++++
 5 files changed, 59 insertions(+)

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 7b4eaf4..5af3f97 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -978,6 +978,8 @@ static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy,
 		return -1;
 	}
 
+	mwifiex_set_ht_params(priv, bss_cfg, params);
+
 	if (mwifiex_send_cmd_sync(priv, HostCmd_CMD_UAP_BSS_STOP,
 				  HostCmd_ACT_GEN_SET, 0, NULL)) {
 		wiphy_err(wiphy, "Failed to stop the BSS\n");
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 561452a..9686f6f 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -162,6 +162,12 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
 
 #define ISSUPP_11NENABLED(FwCapInfo) (FwCapInfo & BIT(11))
 
+#define MWIFIEX_DEF_HT_CAP	(IEEE80211_HT_CAP_DSSSCCK40 | \
+				 (1 << IEEE80211_HT_CAP_RX_STBC_SHIFT) | \
+				 IEEE80211_HT_CAP_SM_PS)
+
+#define MWIFIEX_DEF_AMPDU	IEEE80211_HT_AMPDU_PARM_FACTOR
+
 /* dev_cap bitmap
  * BIT
  * 0-16		reserved
diff --git a/drivers/net/wireless/mwifiex/ioctl.h b/drivers/net/wireless/mwifiex/ioctl.h
index e6be6ee..8c8e47c 100644
--- a/drivers/net/wireless/mwifiex/ioctl.h
+++ b/drivers/net/wireless/mwifiex/ioctl.h
@@ -90,6 +90,7 @@ struct mwifiex_uap_bss_param {
 	u16 key_mgmt;
 	u16 key_mgmt_operation;
 	struct wpa_param wpa_cfg;
+	struct ieee80211_ht_cap ht_cap;
 };
 
 enum {
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 512481e..0b3b5aa 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -840,6 +840,9 @@ void mwifiex_init_priv_params(struct mwifiex_private *priv,
 int mwifiex_set_secure_params(struct mwifiex_private *priv,
 			      struct mwifiex_uap_bss_param *bss_config,
 			      struct cfg80211_ap_settings *params);
+void mwifiex_set_ht_params(struct mwifiex_private *priv,
+			   struct mwifiex_uap_bss_param *bss_cfg,
+			   struct cfg80211_ap_settings *params);
 
 /*
  * This function checks if the queuing is RA based or not.
diff --git a/drivers/net/wireless/mwifiex/uap_cmd.c b/drivers/net/wireless/mwifiex/uap_cmd.c
index fb0c6cb..59e5ba4 100644
--- a/drivers/net/wireless/mwifiex/uap_cmd.c
+++ b/drivers/net/wireless/mwifiex/uap_cmd.c
@@ -118,6 +118,33 @@ int mwifiex_set_secure_params(struct mwifiex_private *priv,
 	return 0;
 }
 
+/* This function updates 11n related parameters from IE and sets them into
+ * bss_config structure.
+ */
+void
+mwifiex_set_ht_params(struct mwifiex_private *priv,
+		      struct mwifiex_uap_bss_param *bss_cfg,
+		      struct cfg80211_ap_settings *params)
+{
+	const u8 *ht_ie;
+
+	if (!ISSUPP_11NENABLED(priv->adapter->fw_cap_info))
+		return;
+
+	ht_ie = cfg80211_find_ie(WLAN_EID_HT_CAPABILITY, params->beacon.tail,
+				 params->beacon.tail_len);
+	if (ht_ie) {
+		memcpy(&bss_cfg->ht_cap, ht_ie + 2,
+		       sizeof(struct ieee80211_ht_cap));
+	} else {
+		memset(&bss_cfg->ht_cap , 0, sizeof(struct ieee80211_ht_cap));
+		bss_cfg->ht_cap.cap_info = cpu_to_le16(MWIFIEX_DEF_HT_CAP);
+		bss_cfg->ht_cap.ampdu_params_info = MWIFIEX_DEF_AMPDU;
+	}
+
+	return;
+}
+
 /* This function initializes some of mwifiex_uap_bss_param variables.
  * This helps FW in ignoring invalid values. These values may or may not
  * be get updated to valid ones at later stage.
@@ -154,6 +181,7 @@ mwifiex_uap_bss_param_prepare(u8 *tlv, void *cmd_buf, u16 *param_size)
 	struct host_cmd_tlv_auth_type *auth_type;
 	struct host_cmd_tlv_passphrase *passphrase;
 	struct host_cmd_tlv_akmp *tlv_akmp;
+	struct mwifiex_ie_types_htcap *htcap;
 	struct mwifiex_uap_bss_param *bss_cfg = cmd_buf;
 	u16 cmd_size = *param_size;
 
@@ -330,6 +358,25 @@ mwifiex_uap_bss_param_prepare(u8 *tlv, void *cmd_buf, u16 *param_size)
 		tlv += sizeof(struct host_cmd_tlv_encrypt_protocol);
 	}
 
+	if (bss_cfg->ht_cap.cap_info) {
+		htcap = (struct mwifiex_ie_types_htcap *)tlv;
+		htcap->header.type = cpu_to_le16(WLAN_EID_HT_CAPABILITY);
+		htcap->header.len =
+				cpu_to_le16(sizeof(struct ieee80211_ht_cap));
+		htcap->ht_cap.cap_info = bss_cfg->ht_cap.cap_info;
+		htcap->ht_cap.ampdu_params_info =
+					     bss_cfg->ht_cap.ampdu_params_info;
+		memcpy(&htcap->ht_cap.mcs, &bss_cfg->ht_cap.mcs,
+		       sizeof(struct ieee80211_mcs_info));
+		htcap->ht_cap.extended_ht_cap_info =
+					bss_cfg->ht_cap.extended_ht_cap_info;
+		htcap->ht_cap.tx_BF_cap_info = bss_cfg->ht_cap.tx_BF_cap_info;
+		htcap->ht_cap.antenna_selection_info =
+					bss_cfg->ht_cap.antenna_selection_info;
+		cmd_size += sizeof(struct mwifiex_ie_types_htcap);
+		tlv += sizeof(struct mwifiex_ie_types_htcap);
+	}
+
 	*param_size = cmd_size;
 
 	return 0;
-- 
cgit v1.1


From 5d66cb62954106d4abfb67bbb5a14cec57903cbb Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Fri, 15 Jun 2012 12:21:54 -0700
Subject: mwifiex: separate uAP WPA/WPA2 parsing from other BSS parameters

To enhance readability, create a separate function for parsing
WPA/WPA2 related parameters from cfg80211_ap_settings.
There is no functional change in this patch.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/uap_cmd.c | 147 ++++++++++++++++++---------------
 1 file changed, 79 insertions(+), 68 deletions(-)

diff --git a/drivers/net/wireless/mwifiex/uap_cmd.c b/drivers/net/wireless/mwifiex/uap_cmd.c
index 59e5ba4..86a4432 100644
--- a/drivers/net/wireless/mwifiex/uap_cmd.c
+++ b/drivers/net/wireless/mwifiex/uap_cmd.c
@@ -162,6 +162,82 @@ void mwifiex_set_sys_config_invalid_data(struct mwifiex_uap_bss_param *config)
 }
 
 /* This function parses BSS related parameters from structure
+ * and prepares TLVs specific to WPA/WPA2 security.
+ * These TLVs are appended to command buffer.
+ */
+static void
+mwifiex_uap_bss_wpa(u8 **tlv_buf, void *cmd_buf, u16 *param_size)
+{
+	struct host_cmd_tlv_pwk_cipher *pwk_cipher;
+	struct host_cmd_tlv_gwk_cipher *gwk_cipher;
+	struct host_cmd_tlv_passphrase *passphrase;
+	struct host_cmd_tlv_akmp *tlv_akmp;
+	struct mwifiex_uap_bss_param *bss_cfg = cmd_buf;
+	u16 cmd_size = *param_size;
+	u8 *tlv = *tlv_buf;
+
+	tlv_akmp = (struct host_cmd_tlv_akmp *)tlv;
+	tlv_akmp->tlv.type = cpu_to_le16(TLV_TYPE_UAP_AKMP);
+	tlv_akmp->tlv.len = cpu_to_le16(sizeof(struct host_cmd_tlv_akmp) -
+					sizeof(struct host_cmd_tlv));
+	tlv_akmp->key_mgmt_operation = cpu_to_le16(bss_cfg->key_mgmt_operation);
+	tlv_akmp->key_mgmt = cpu_to_le16(bss_cfg->key_mgmt);
+	cmd_size += sizeof(struct host_cmd_tlv_akmp);
+	tlv += sizeof(struct host_cmd_tlv_akmp);
+
+	if (bss_cfg->wpa_cfg.pairwise_cipher_wpa & VALID_CIPHER_BITMAP) {
+		pwk_cipher = (struct host_cmd_tlv_pwk_cipher *)tlv;
+		pwk_cipher->tlv.type = cpu_to_le16(TLV_TYPE_PWK_CIPHER);
+		pwk_cipher->tlv.len =
+			cpu_to_le16(sizeof(struct host_cmd_tlv_pwk_cipher) -
+				    sizeof(struct host_cmd_tlv));
+		pwk_cipher->proto = cpu_to_le16(PROTOCOL_WPA);
+		pwk_cipher->cipher = bss_cfg->wpa_cfg.pairwise_cipher_wpa;
+		cmd_size += sizeof(struct host_cmd_tlv_pwk_cipher);
+		tlv += sizeof(struct host_cmd_tlv_pwk_cipher);
+	}
+
+	if (bss_cfg->wpa_cfg.pairwise_cipher_wpa2 & VALID_CIPHER_BITMAP) {
+		pwk_cipher = (struct host_cmd_tlv_pwk_cipher *)tlv;
+		pwk_cipher->tlv.type = cpu_to_le16(TLV_TYPE_PWK_CIPHER);
+		pwk_cipher->tlv.len =
+			cpu_to_le16(sizeof(struct host_cmd_tlv_pwk_cipher) -
+				    sizeof(struct host_cmd_tlv));
+		pwk_cipher->proto = cpu_to_le16(PROTOCOL_WPA2);
+		pwk_cipher->cipher = bss_cfg->wpa_cfg.pairwise_cipher_wpa2;
+		cmd_size += sizeof(struct host_cmd_tlv_pwk_cipher);
+		tlv += sizeof(struct host_cmd_tlv_pwk_cipher);
+	}
+
+	if (bss_cfg->wpa_cfg.group_cipher & VALID_CIPHER_BITMAP) {
+		gwk_cipher = (struct host_cmd_tlv_gwk_cipher *)tlv;
+		gwk_cipher->tlv.type = cpu_to_le16(TLV_TYPE_GWK_CIPHER);
+		gwk_cipher->tlv.len =
+			cpu_to_le16(sizeof(struct host_cmd_tlv_gwk_cipher) -
+				    sizeof(struct host_cmd_tlv));
+		gwk_cipher->cipher = bss_cfg->wpa_cfg.group_cipher;
+		cmd_size += sizeof(struct host_cmd_tlv_gwk_cipher);
+		tlv += sizeof(struct host_cmd_tlv_gwk_cipher);
+	}
+
+	if (bss_cfg->wpa_cfg.length) {
+		passphrase = (struct host_cmd_tlv_passphrase *)tlv;
+		passphrase->tlv.type = cpu_to_le16(TLV_TYPE_UAP_WPA_PASSPHRASE);
+		passphrase->tlv.len = cpu_to_le16(bss_cfg->wpa_cfg.length);
+		memcpy(passphrase->passphrase, bss_cfg->wpa_cfg.passphrase,
+		       bss_cfg->wpa_cfg.length);
+		cmd_size += sizeof(struct host_cmd_tlv) +
+			    bss_cfg->wpa_cfg.length;
+		tlv += sizeof(struct host_cmd_tlv) + bss_cfg->wpa_cfg.length;
+	}
+
+	*param_size = cmd_size;
+	*tlv_buf = tlv;
+
+	return;
+}
+
+/* This function parses BSS related parameters from structure
  * and prepares TLVs. These TLVs are appended to command buffer.
 */
 static int
@@ -175,12 +251,8 @@ mwifiex_uap_bss_param_prepare(u8 *tlv, void *cmd_buf, u16 *param_size)
 	struct host_cmd_tlv_frag_threshold *frag_threshold;
 	struct host_cmd_tlv_rts_threshold *rts_threshold;
 	struct host_cmd_tlv_retry_limit *retry_limit;
-	struct host_cmd_tlv_pwk_cipher *pwk_cipher;
-	struct host_cmd_tlv_gwk_cipher *gwk_cipher;
 	struct host_cmd_tlv_encrypt_protocol *encrypt_protocol;
 	struct host_cmd_tlv_auth_type *auth_type;
-	struct host_cmd_tlv_passphrase *passphrase;
-	struct host_cmd_tlv_akmp *tlv_akmp;
 	struct mwifiex_ie_types_htcap *htcap;
 	struct mwifiex_uap_bss_param *bss_cfg = cmd_buf;
 	u16 cmd_size = *param_size;
@@ -271,70 +343,9 @@ mwifiex_uap_bss_param_prepare(u8 *tlv, void *cmd_buf, u16 *param_size)
 	}
 	if ((bss_cfg->protocol & PROTOCOL_WPA) ||
 	    (bss_cfg->protocol & PROTOCOL_WPA2) ||
-	    (bss_cfg->protocol & PROTOCOL_EAP)) {
-		tlv_akmp = (struct host_cmd_tlv_akmp *)tlv;
-		tlv_akmp->tlv.type = cpu_to_le16(TLV_TYPE_UAP_AKMP);
-		tlv_akmp->tlv.len =
-		    cpu_to_le16(sizeof(struct host_cmd_tlv_akmp) -
-				sizeof(struct host_cmd_tlv));
-		tlv_akmp->key_mgmt_operation =
-			cpu_to_le16(bss_cfg->key_mgmt_operation);
-		tlv_akmp->key_mgmt = cpu_to_le16(bss_cfg->key_mgmt);
-		cmd_size += sizeof(struct host_cmd_tlv_akmp);
-		tlv += sizeof(struct host_cmd_tlv_akmp);
-
-		if (bss_cfg->wpa_cfg.pairwise_cipher_wpa &
-				VALID_CIPHER_BITMAP) {
-			pwk_cipher = (struct host_cmd_tlv_pwk_cipher *)tlv;
-			pwk_cipher->tlv.type =
-				cpu_to_le16(TLV_TYPE_PWK_CIPHER);
-			pwk_cipher->tlv.len = cpu_to_le16(
-				sizeof(struct host_cmd_tlv_pwk_cipher) -
-				sizeof(struct host_cmd_tlv));
-			pwk_cipher->proto = cpu_to_le16(PROTOCOL_WPA);
-			pwk_cipher->cipher =
-				bss_cfg->wpa_cfg.pairwise_cipher_wpa;
-			cmd_size += sizeof(struct host_cmd_tlv_pwk_cipher);
-			tlv += sizeof(struct host_cmd_tlv_pwk_cipher);
-		}
-		if (bss_cfg->wpa_cfg.pairwise_cipher_wpa2 &
-				VALID_CIPHER_BITMAP) {
-			pwk_cipher = (struct host_cmd_tlv_pwk_cipher *)tlv;
-			pwk_cipher->tlv.type = cpu_to_le16(TLV_TYPE_PWK_CIPHER);
-			pwk_cipher->tlv.len = cpu_to_le16(
-				sizeof(struct host_cmd_tlv_pwk_cipher) -
-				sizeof(struct host_cmd_tlv));
-			pwk_cipher->proto = cpu_to_le16(PROTOCOL_WPA2);
-			pwk_cipher->cipher =
-				bss_cfg->wpa_cfg.pairwise_cipher_wpa2;
-			cmd_size += sizeof(struct host_cmd_tlv_pwk_cipher);
-			tlv += sizeof(struct host_cmd_tlv_pwk_cipher);
-		}
-		if (bss_cfg->wpa_cfg.group_cipher & VALID_CIPHER_BITMAP) {
-			gwk_cipher = (struct host_cmd_tlv_gwk_cipher *)tlv;
-			gwk_cipher->tlv.type = cpu_to_le16(TLV_TYPE_GWK_CIPHER);
-			gwk_cipher->tlv.len = cpu_to_le16(
-				sizeof(struct host_cmd_tlv_gwk_cipher) -
-				sizeof(struct host_cmd_tlv));
-			gwk_cipher->cipher = bss_cfg->wpa_cfg.group_cipher;
-			cmd_size += sizeof(struct host_cmd_tlv_gwk_cipher);
-			tlv += sizeof(struct host_cmd_tlv_gwk_cipher);
-		}
-		if (bss_cfg->wpa_cfg.length) {
-			passphrase = (struct host_cmd_tlv_passphrase *)tlv;
-			passphrase->tlv.type =
-				cpu_to_le16(TLV_TYPE_UAP_WPA_PASSPHRASE);
-			passphrase->tlv.len =
-				cpu_to_le16(bss_cfg->wpa_cfg.length);
-			memcpy(passphrase->passphrase,
-			       bss_cfg->wpa_cfg.passphrase,
-			       bss_cfg->wpa_cfg.length);
-			cmd_size += sizeof(struct host_cmd_tlv) +
-				    bss_cfg->wpa_cfg.length;
-			tlv += sizeof(struct host_cmd_tlv) +
-			       bss_cfg->wpa_cfg.length;
-		}
-	}
+	    (bss_cfg->protocol & PROTOCOL_EAP))
+		mwifiex_uap_bss_wpa(&tlv, cmd_buf, &cmd_size);
+
 	if ((bss_cfg->auth_mode <= WLAN_AUTH_SHARED_KEY) ||
 	    (bss_cfg->auth_mode == MWIFIEX_AUTH_MODE_AUTO)) {
 		auth_type = (struct host_cmd_tlv_auth_type *)tlv;
-- 
cgit v1.1


From 96893538564c43276dffe5e294b56935197cf1c8 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Fri, 15 Jun 2012 12:21:55 -0700
Subject: mwifiex: support for WEP in AP mode

This patch adds support for WEP open/shared encryption in AP mode.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cfg80211.c | 30 +++++++++++++++-
 drivers/net/wireless/mwifiex/fw.h       |  8 +++++
 drivers/net/wireless/mwifiex/ioctl.h    |  9 +++++
 drivers/net/wireless/mwifiex/uap_cmd.c  | 62 +++++++++++++++++++++++++++++++++
 4 files changed, 108 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 5af3f97..9c2e08e 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -170,7 +170,9 @@ mwifiex_cfg80211_set_default_key(struct wiphy *wiphy, struct net_device *netdev,
 	if (!priv->sec_info.wep_enabled)
 		return 0;
 
-	if (mwifiex_set_encode(priv, NULL, 0, key_index, NULL, 0)) {
+	if (priv->bss_type == MWIFIEX_BSS_TYPE_UAP) {
+		priv->wep_key_curr_index = key_index;
+	} else if (mwifiex_set_encode(priv, NULL, 0, key_index, NULL, 0)) {
 		wiphy_err(wiphy, "set default Tx key index\n");
 		return -EFAULT;
 	}
@@ -187,9 +189,25 @@ mwifiex_cfg80211_add_key(struct wiphy *wiphy, struct net_device *netdev,
 			 struct key_params *params)
 {
 	struct mwifiex_private *priv = mwifiex_netdev_get_priv(netdev);
+	struct mwifiex_wep_key *wep_key;
 	const u8 bc_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
 	const u8 *peer_mac = pairwise ? mac_addr : bc_mac;
 
+	if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_UAP &&
+	    (params->cipher == WLAN_CIPHER_SUITE_WEP40 ||
+	     params->cipher == WLAN_CIPHER_SUITE_WEP104)) {
+		if (params->key && params->key_len) {
+			wep_key = &priv->wep_key[key_index];
+			memset(wep_key, 0, sizeof(struct mwifiex_wep_key));
+			memcpy(wep_key->key_material, params->key,
+			       params->key_len);
+			wep_key->key_index = key_index;
+			wep_key->key_length = params->key_len;
+			priv->sec_info.wep_enabled = 1;
+		}
+		return 0;
+	}
+
 	if (mwifiex_set_encode(priv, params->key, params->key_len,
 			       key_index, peer_mac, 0)) {
 		wiphy_err(wiphy, "crypto keys added\n");
@@ -1003,6 +1021,16 @@ static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy,
 		return -1;
 	}
 
+	if (priv->sec_info.wep_enabled)
+		priv->curr_pkt_filter |= HostCmd_ACT_MAC_WEP_ENABLE;
+	else
+		priv->curr_pkt_filter &= ~HostCmd_ACT_MAC_WEP_ENABLE;
+
+	if (mwifiex_send_cmd_sync(priv, HostCmd_CMD_MAC_CONTROL,
+				  HostCmd_ACT_GEN_SET, 0,
+				  &priv->curr_pkt_filter))
+		return -1;
+
 	return 0;
 }
 
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 9686f6f..1184141 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -124,6 +124,7 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
 #define TLV_TYPE_UAP_DTIM_PERIOD    (PROPRIETARY_TLV_BASE_ID + 45)
 #define TLV_TYPE_UAP_BCAST_SSID     (PROPRIETARY_TLV_BASE_ID + 48)
 #define TLV_TYPE_UAP_RTS_THRESHOLD  (PROPRIETARY_TLV_BASE_ID + 51)
+#define TLV_TYPE_UAP_WEP_KEY        (PROPRIETARY_TLV_BASE_ID + 59)
 #define TLV_TYPE_UAP_WPA_PASSPHRASE (PROPRIETARY_TLV_BASE_ID + 60)
 #define TLV_TYPE_UAP_ENCRY_PROTOCOL (PROPRIETARY_TLV_BASE_ID + 64)
 #define TLV_TYPE_UAP_AKMP           (PROPRIETARY_TLV_BASE_ID + 65)
@@ -1201,6 +1202,13 @@ struct host_cmd_tlv_passphrase {
 	u8 passphrase[0];
 } __packed;
 
+struct host_cmd_tlv_wep_key {
+	struct host_cmd_tlv tlv;
+	u8 key_index;
+	u8 is_default;
+	u8 key[1];
+};
+
 struct host_cmd_tlv_auth_type {
 	struct host_cmd_tlv tlv;
 	u8 auth_type;
diff --git a/drivers/net/wireless/mwifiex/ioctl.h b/drivers/net/wireless/mwifiex/ioctl.h
index 8c8e47c..9f088fb 100644
--- a/drivers/net/wireless/mwifiex/ioctl.h
+++ b/drivers/net/wireless/mwifiex/ioctl.h
@@ -21,6 +21,7 @@
 #define _MWIFIEX_IOCTL_H_
 
 #include <net/mac80211.h>
+#include <net/lib80211.h>
 
 enum {
 	MWIFIEX_SCAN_TYPE_UNCHANGED = 0,
@@ -71,6 +72,13 @@ struct wpa_param {
 	u8 passphrase[MWIFIEX_WPA_PASSHPHRASE_LEN];
 };
 
+struct wep_key {
+	u8 key_index;
+	u8 is_default;
+	u16 length;
+	u8 key[WLAN_KEY_LEN_WEP104];
+};
+
 #define KEY_MGMT_ON_HOST        0x03
 #define MWIFIEX_AUTH_MODE_AUTO  0xFF
 #define BAND_CONFIG_MANUAL      0x00
@@ -90,6 +98,7 @@ struct mwifiex_uap_bss_param {
 	u16 key_mgmt;
 	u16 key_mgmt_operation;
 	struct wpa_param wpa_cfg;
+	struct wep_key wep_cfg[NUM_WEP_KEYS];
 	struct ieee80211_ht_cap ht_cap;
 };
 
diff --git a/drivers/net/wireless/mwifiex/uap_cmd.c b/drivers/net/wireless/mwifiex/uap_cmd.c
index 86a4432..abb1322 100644
--- a/drivers/net/wireless/mwifiex/uap_cmd.c
+++ b/drivers/net/wireless/mwifiex/uap_cmd.c
@@ -26,6 +26,7 @@ int mwifiex_set_secure_params(struct mwifiex_private *priv,
 			      struct mwifiex_uap_bss_param *bss_config,
 			      struct cfg80211_ap_settings *params) {
 	int i;
+	struct mwifiex_wep_key wep_key;
 
 	if (!params->privacy) {
 		bss_config->protocol = PROTOCOL_NO_SECURITY;
@@ -104,6 +105,27 @@ int mwifiex_set_secure_params(struct mwifiex_private *priv,
 	switch (params->crypto.cipher_group) {
 	case WLAN_CIPHER_SUITE_WEP40:
 	case WLAN_CIPHER_SUITE_WEP104:
+		if (priv->sec_info.wep_enabled) {
+			bss_config->protocol = PROTOCOL_STATIC_WEP;
+			bss_config->key_mgmt = KEY_MGMT_NONE;
+			bss_config->wpa_cfg.length = 0;
+
+			for (i = 0; i < NUM_WEP_KEYS; i++) {
+				wep_key = priv->wep_key[i];
+				bss_config->wep_cfg[i].key_index = i;
+
+				if (priv->wep_key_curr_index == i)
+					bss_config->wep_cfg[i].is_default = 1;
+				else
+					bss_config->wep_cfg[i].is_default = 0;
+
+				bss_config->wep_cfg[i].length =
+							     wep_key.key_length;
+				memcpy(&bss_config->wep_cfg[i].key,
+				       &wep_key.key_material,
+				       wep_key.key_length);
+			}
+		}
 		break;
 	case WLAN_CIPHER_SUITE_TKIP:
 		bss_config->wpa_cfg.group_cipher = CIPHER_TKIP;
@@ -238,6 +260,44 @@ mwifiex_uap_bss_wpa(u8 **tlv_buf, void *cmd_buf, u16 *param_size)
 }
 
 /* This function parses BSS related parameters from structure
+ * and prepares TLVs specific to WEP encryption.
+ * These TLVs are appended to command buffer.
+ */
+static void
+mwifiex_uap_bss_wep(u8 **tlv_buf, void *cmd_buf, u16 *param_size)
+{
+	struct host_cmd_tlv_wep_key *wep_key;
+	u16 cmd_size = *param_size;
+	int i;
+	u8 *tlv = *tlv_buf;
+	struct mwifiex_uap_bss_param *bss_cfg = cmd_buf;
+
+	for (i = 0; i < NUM_WEP_KEYS; i++) {
+		if (bss_cfg->wep_cfg[i].length &&
+		    (bss_cfg->wep_cfg[i].length == WLAN_KEY_LEN_WEP40 ||
+		     bss_cfg->wep_cfg[i].length == WLAN_KEY_LEN_WEP104)) {
+			wep_key = (struct host_cmd_tlv_wep_key *)tlv;
+			wep_key->tlv.type = cpu_to_le16(TLV_TYPE_UAP_WEP_KEY);
+			wep_key->tlv.len =
+				cpu_to_le16(bss_cfg->wep_cfg[i].length + 2);
+			wep_key->key_index = bss_cfg->wep_cfg[i].key_index;
+			wep_key->is_default = bss_cfg->wep_cfg[i].is_default;
+			memcpy(wep_key->key, bss_cfg->wep_cfg[i].key,
+			       bss_cfg->wep_cfg[i].length);
+			cmd_size += sizeof(struct host_cmd_tlv) + 2 +
+				    bss_cfg->wep_cfg[i].length;
+			tlv += sizeof(struct host_cmd_tlv) + 2 +
+				    bss_cfg->wep_cfg[i].length;
+		}
+	}
+
+	*param_size = cmd_size;
+	*tlv_buf = tlv;
+
+	return;
+}
+
+/* This function parses BSS related parameters from structure
  * and prepares TLVs. These TLVs are appended to command buffer.
 */
 static int
@@ -345,6 +405,8 @@ mwifiex_uap_bss_param_prepare(u8 *tlv, void *cmd_buf, u16 *param_size)
 	    (bss_cfg->protocol & PROTOCOL_WPA2) ||
 	    (bss_cfg->protocol & PROTOCOL_EAP))
 		mwifiex_uap_bss_wpa(&tlv, cmd_buf, &cmd_size);
+	else
+		mwifiex_uap_bss_wep(&tlv, cmd_buf, &cmd_size);
 
 	if ((bss_cfg->auth_mode <= WLAN_AUTH_SHARED_KEY) ||
 	    (bss_cfg->auth_mode == MWIFIEX_AUTH_MODE_AUTO)) {
-- 
cgit v1.1


From 0bd8b79fe928b88ebaf36f2621f921a2fc09ea9c Mon Sep 17 00:00:00 2001
From: Seth Forshee <seth.forshee@canonical.com>
Date: Sat, 16 Jun 2012 07:47:48 -0500
Subject: brcm80211: smac: don't set up tx power limits during initialization

This code is unnecessary, and in fact it's never executed because the
interface is never up when brcms_c_channels_commit() is called. Removing
it helps simplify the implementation of proper regulatory support.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmsmac/channel.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
index eb77ac3..049d78f 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
@@ -908,7 +908,6 @@ static void brcms_c_channels_commit(struct brcms_cm_info *wlc_cm)
 {
 	struct brcms_c_info *wlc = wlc_cm->wlc;
 	uint chan;
-	struct txpwr_limits txpwr;
 
 	/* search for the existence of any valid channel */
 	for (chan = 0; chan < MAXCHANNEL; chan++) {
@@ -949,13 +948,6 @@ static void brcms_c_channels_commit(struct brcms_cm_info *wlc_cm)
 		wlc_phy_chanspec_ch14_widefilter_set(wlc->band->pi,
 						     brcms_c_japan(wlc) ? true :
 						     false);
-
-	if (wlc->pub->up && chan != INVCHANNEL) {
-		brcms_c_channel_reg_limits(wlc_cm, wlc->chanspec, &txpwr);
-		brcms_c_channel_min_txpower_limits_with_local_constraint(wlc_cm,
-			&txpwr, BRCMS_TXPWR_MAX);
-		wlc_phy_txpower_limit_set(wlc->band->pi, &txpwr, wlc->chanspec);
-	}
 }
 
 static int
-- 
cgit v1.1


From 91691295527d3fd63f12079222df0fd8048acccb Mon Sep 17 00:00:00 2001
From: Seth Forshee <seth.forshee@canonical.com>
Date: Sat, 16 Jun 2012 07:47:49 -0500
Subject: brcm80211: smac: always set channel specified by mac80211

In some situations brcmsmac is choosing a channel internally. This makes
it difficult at times to know what channel to use for enforcing
regulatory constraints, so instead always use the channel from the
mac80211 configuration.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmsmac/main.c | 30 ++++++--------------------
 1 file changed, 6 insertions(+), 24 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c
index 19db405..93c865d 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -3139,20 +3139,6 @@ void brcms_c_reset(struct brcms_c_info *wlc)
 	brcms_b_reset(wlc->hw);
 }
 
-/* Return the channel the driver should initialize during brcms_c_init.
- * the channel may have to be changed from the currently configured channel
- * if other configurations are in conflict (bandlocked, 11n mode disabled,
- * invalid channel for current country, etc.)
- */
-static u16 brcms_c_init_chanspec(struct brcms_c_info *wlc)
-{
-	u16 chanspec =
-	    1 | WL_CHANSPEC_BW_20 | WL_CHANSPEC_CTL_SB_NONE |
-	    WL_CHANSPEC_BAND_2G;
-
-	return chanspec;
-}
-
 void brcms_c_init_scb(struct scb *scb)
 {
 	int i;
@@ -5129,6 +5115,8 @@ static void brcms_c_wme_retries_write(struct brcms_c_info *wlc)
 /* make interface operational */
 int brcms_c_up(struct brcms_c_info *wlc)
 {
+	struct ieee80211_channel *ch;
+
 	BCMMSG(wlc->wiphy, "wl%d\n", wlc->pub->unit);
 
 	/* HW is turned off so don't try to access it */
@@ -5195,8 +5183,9 @@ int brcms_c_up(struct brcms_c_info *wlc)
 	wlc->pub->up = true;
 
 	if (wlc->bandinit_pending) {
+		ch = wlc->pub->ieee_hw->conf.channel;
 		brcms_c_suspend_mac_and_wait(wlc);
-		brcms_c_set_chanspec(wlc, wlc->default_bss->chanspec);
+		brcms_c_set_chanspec(wlc, ch20mhz_chspec(ch->hw_value));
 		wlc->bandinit_pending = false;
 		brcms_c_enable_mac(wlc);
 	}
@@ -8201,19 +8190,12 @@ bool brcms_c_dpc(struct brcms_c_info *wlc, bool bounded)
 void brcms_c_init(struct brcms_c_info *wlc, bool mute_tx)
 {
 	struct bcma_device *core = wlc->hw->d11core;
+	struct ieee80211_channel *ch = wlc->pub->ieee_hw->conf.channel;
 	u16 chanspec;
 
 	BCMMSG(wlc->wiphy, "wl%d\n", wlc->pub->unit);
 
-	/*
-	 * This will happen if a big-hammer was executed. In
-	 * that case, we want to go back to the channel that
-	 * we were on and not new channel
-	 */
-	if (wlc->pub->associated)
-		chanspec = wlc->home_chanspec;
-	else
-		chanspec = brcms_c_init_chanspec(wlc);
+	chanspec = ch20mhz_chspec(ch->hw_value);
 
 	brcms_b_init(wlc->hw, chanspec);
 
-- 
cgit v1.1


From a3ce5cc1a60fd2e237599d4b9bc247422a7523c2 Mon Sep 17 00:00:00 2001
From: Seth Forshee <seth.forshee@canonical.com>
Date: Sat, 16 Jun 2012 07:47:50 -0500
Subject: brcm80211: smac: remove unused code for 40MHz channels

This code has been kept around in anticipation of adding support for
40MHz channels, but subsequent patches to better integrate with mac80211
regulatory support will render it completely broken. Therefore we should
go ahead and remove it.

Keep these changes separate from other cleanup patches in order to make
it easier to resurrect 40MHz channel support at some point in the
future.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmsmac/channel.c | 116 ----------------------
 1 file changed, 116 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
index 049d78f..089cc87 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
@@ -512,83 +512,6 @@ static const struct {
 	"X2", LOCALES(i, 11, bn, 11n)},	/* Worldwide RoW 2 */
 };
 
-#ifdef SUPPORT_40MHZ
-/* 20MHz channel info for 40MHz pairing support */
-struct chan20_info {
-	u8 sb;
-	u8 adj_sbs;
-};
-
-/* indicates adjacent channels that are allowed for a 40 Mhz channel and
- * those that permitted by the HT
- */
-struct chan20_info chan20_info[] = {
-	/* 11b/11g */
-/* 0 */ {1, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 1 */ {2, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 2 */ {3, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 3 */ {4, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 4 */ {5, (CH_UPPER_SB | CH_LOWER_SB | CH_EWA_VALID)},
-/* 5 */ {6, (CH_UPPER_SB | CH_LOWER_SB | CH_EWA_VALID)},
-/* 6 */ {7, (CH_UPPER_SB | CH_LOWER_SB | CH_EWA_VALID)},
-/* 7 */ {8, (CH_UPPER_SB | CH_LOWER_SB | CH_EWA_VALID)},
-/* 8 */ {9, (CH_UPPER_SB | CH_LOWER_SB | CH_EWA_VALID)},
-/* 9 */ {10, (CH_LOWER_SB | CH_EWA_VALID)},
-/* 10 */ {11, (CH_LOWER_SB | CH_EWA_VALID)},
-/* 11 */ {12, (CH_LOWER_SB)},
-/* 12 */ {13, (CH_LOWER_SB)},
-/* 13 */ {14, (CH_LOWER_SB)},
-
-/* 11a japan high */
-/* 14 */ {34, (CH_UPPER_SB)},
-/* 15 */ {38, (CH_LOWER_SB)},
-/* 16 */ {42, (CH_LOWER_SB)},
-/* 17 */ {46, (CH_LOWER_SB)},
-
-/* 11a usa low */
-/* 18 */ {36, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 19 */ {40, (CH_LOWER_SB | CH_EWA_VALID)},
-/* 20 */ {44, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 21 */ {48, (CH_LOWER_SB | CH_EWA_VALID)},
-/* 22 */ {52, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 23 */ {56, (CH_LOWER_SB | CH_EWA_VALID)},
-/* 24 */ {60, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 25 */ {64, (CH_LOWER_SB | CH_EWA_VALID)},
-
-/* 11a Europe */
-/* 26 */ {100, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 27 */ {104, (CH_LOWER_SB | CH_EWA_VALID)},
-/* 28 */ {108, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 29 */ {112, (CH_LOWER_SB | CH_EWA_VALID)},
-/* 30 */ {116, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 31 */ {120, (CH_LOWER_SB | CH_EWA_VALID)},
-/* 32 */ {124, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 33 */ {128, (CH_LOWER_SB | CH_EWA_VALID)},
-/* 34 */ {132, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 35 */ {136, (CH_LOWER_SB | CH_EWA_VALID)},
-/* 36 */ {140, (CH_LOWER_SB)},
-
-/* 11a usa high, ref5 only */
-/* The 0x80 bit in pdiv means these are REF5, other entries are REF20 */
-/* 37 */ {149, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 38 */ {153, (CH_LOWER_SB | CH_EWA_VALID)},
-/* 39 */ {157, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 40 */ {161, (CH_LOWER_SB | CH_EWA_VALID)},
-/* 41 */ {165, (CH_LOWER_SB)},
-
-/* 11a japan */
-/* 42 */ {184, (CH_UPPER_SB)},
-/* 43 */ {188, (CH_LOWER_SB)},
-/* 44 */ {192, (CH_UPPER_SB)},
-/* 45 */ {196, (CH_LOWER_SB)},
-/* 46 */ {200, (CH_UPPER_SB)},
-/* 47 */ {204, (CH_LOWER_SB)},
-/* 48 */ {208, (CH_UPPER_SB)},
-/* 49 */ {212, (CH_LOWER_SB)},
-/* 50 */ {216, (CH_LOWER_SB)}
-};
-#endif				/* SUPPORT_40MHZ */
-
 static const struct locale_info *brcms_c_get_locale_2g(u8 locale_idx)
 {
 	if (locale_idx >= ARRAY_SIZE(g_locale_2g_table))
@@ -1449,45 +1372,6 @@ brcms_c_valid_chanspec_ext(struct brcms_cm_info *wlc_cm, u16 chspec,
 			return brcms_c_valid_channel20(wlc_cm->wlc->cmi,
 						       channel);
 	}
-#ifdef SUPPORT_40MHZ
-	/*
-	 * We know we are now checking a 40MHZ channel, so we should
-	 * only be here for NPHYS
-	 */
-	if (BRCMS_ISNPHY(wlc->band) || BRCMS_ISSSLPNPHY(wlc->band)) {
-		u8 upper_sideband = 0, idx;
-		u8 num_ch20_entries =
-		    sizeof(chan20_info) / sizeof(struct chan20_info);
-
-		if (!VALID_40CHANSPEC_IN_BAND(wlc, chspec_bandunit(chspec)))
-			return false;
-
-		if (dualband) {
-			if (!brcms_c_valid_channel20_db(wlc->cmi,
-							lower_20_sb(channel)) ||
-			    !brcms_c_valid_channel20_db(wlc->cmi,
-							upper_20_sb(channel)))
-				return false;
-		} else {
-			if (!brcms_c_valid_channel20(wlc->cmi,
-						     lower_20_sb(channel)) ||
-			    !brcms_c_valid_channel20(wlc->cmi,
-						     upper_20_sb(channel)))
-				return false;
-		}
-
-		/* find the lower sideband info in the sideband array */
-		for (idx = 0; idx < num_ch20_entries; idx++) {
-			if (chan20_info[idx].sb == lower_20_sb(channel))
-				upper_sideband = chan20_info[idx].adj_sbs;
-		}
-		/* check that the lower sideband allows an upper sideband */
-		if ((upper_sideband & (CH_UPPER_SB | CH_EWA_VALID)) ==
-		    (CH_UPPER_SB | CH_EWA_VALID))
-			return true;
-		return false;
-	}
-#endif				/* 40 MHZ */
 
 	return false;
 }
-- 
cgit v1.1


From 2810a619ca5716e315090119e5695e97814b1e60 Mon Sep 17 00:00:00 2001
From: Seth Forshee <seth.forshee@canonical.com>
Date: Sat, 16 Jun 2012 07:47:51 -0500
Subject: brcm80211: smac: clean up channel.c

Much of the code is either unsed or never put to any useful purpose.
Remove this code in advance of reworking the driver's regulatory
support.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmsmac/channel.c | 138 +---------------------
 1 file changed, 5 insertions(+), 133 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
index 089cc87..c311ef7 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
@@ -58,18 +58,8 @@
 				 LOCALE_CHAN_12_13 | \
 				 LOCALE_CHAN_14)
 
-#define  LOCALE_RADAR_SET_NONE		  0
-#define  LOCALE_RADAR_SET_1		  1
-
 #define  LOCALE_RESTRICTED_NONE		  0
 #define  LOCALE_RESTRICTED_SET_2G_SHORT   1
-#define  LOCALE_RESTRICTED_CHAN_165       2
-#define  LOCALE_CHAN_ALL_5G		  3
-#define  LOCALE_RESTRICTED_JAPAN_LEGACY   4
-#define  LOCALE_RESTRICTED_11D_2G	  5
-#define  LOCALE_RESTRICTED_11D_5G	  6
-#define  LOCALE_RESTRICTED_LOW_HI	  7
-#define  LOCALE_RESTRICTED_12_13_14	  8
 
 #define LOCALE_2G_IDX_i			0
 #define LOCALE_5G_IDX_11		0
@@ -118,8 +108,6 @@
 				 (((c) < 100) ? 2 : \
 				 (((c) < 149) ? 3 : 4))))
 
-#define ISDFS_EU(fl)		(((fl) & BRCMS_DFS_EU) == BRCMS_DFS_EU)
-
 struct brcms_cm_band {
 	/* struct locale_info flags */
 	u8 locale_flags;
@@ -127,9 +115,6 @@ struct brcms_cm_band {
 	struct brcms_chanvec valid_channels;
 	/* List of restricted use channels */
 	const struct brcms_chanvec *restricted_channels;
-	/* List of radar sensitive channels */
-	const struct brcms_chanvec *radar_channels;
-	u8 PAD[8];
 };
 
  /* locale per-channel tx power limits for MIMO frames
@@ -158,7 +143,6 @@ struct brcms_cm_info {
 	char srom_ccode[BRCM_CNTRY_BUF_SZ];	/* Country Code in SROM */
 	uint srom_regrev;	/* Regulatory Rev for the SROM ccode */
 	const struct country_info *country;	/* current country def */
-	char ccode[BRCM_CNTRY_BUF_SZ];	/* current internal Country Code */
 	uint regrev;		/* current Regulatory Revision */
 	char country_abbrev[BRCM_CNTRY_BUF_SZ];	/* current advertised ccode */
 	/* per-band state (one per phy/radio) */
@@ -171,14 +155,10 @@ struct brcms_cm_info {
 /* locale channel and power info. */
 struct locale_info {
 	u32 valid_channels;
-	/* List of radar sensitive channels */
-	u8 radar_channels;
 	/* List of channels used only if APs are detected */
 	u8 restricted_channels;
 	/* Max tx pwr in qdBm for each sub-band */
 	s8 maxpwr[BRCMS_MAXPWR_TBL_SIZE];
-	/* Country IE advertised max tx pwr in dBm per sub-band */
-	s8 pub_maxpwr[BAND_5G_PWR_LVLS];
 	u8 flags;
 };
 
@@ -196,46 +176,10 @@ static const struct brcms_chanvec chanvec_none = {
 	 0x00, 0x00, 0x00, 0x00}
 };
 
-/* All 2.4 GHz HW channels */
-static const struct brcms_chanvec chanvec_all_2G = {
-	{0xfe, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-/* All 5 GHz HW channels */
-static const struct brcms_chanvec chanvec_all_5G = {
-	{0x00, 0x00, 0x00, 0x00, 0x54, 0x55, 0x11, 0x11,
-	 0x01, 0x00, 0x00, 0x00, 0x10, 0x11, 0x11, 0x11,
-	 0x11, 0x11, 0x20, 0x22, 0x22, 0x00, 0x00, 0x11,
-	 0x11, 0x11, 0x11, 0x01}
-};
-
-/*
- * Radar channel sets
- */
-
-/* Channels 52 - 64, 100 - 140 */
-static const struct brcms_chanvec radar_set1 = {
-	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x11,  /* 52 - 60 */
-	 0x01, 0x00, 0x00, 0x00, 0x10, 0x11, 0x11, 0x11,  /* 64, 100 - 124 */
-	 0x11, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  /* 128 - 140 */
-	 0x00, 0x00, 0x00, 0x00}
-};
-
 /*
  * Restricted channel sets
  */
 
-/* Channels 34, 38, 42, 46 */
-static const struct brcms_chanvec restricted_set_japan_legacy = {
-	{0x00, 0x00, 0x00, 0x00, 0x44, 0x44, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
 /* Channels 12, 13 */
 static const struct brcms_chanvec restricted_set_2g_short = {
 	{0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
@@ -244,47 +188,11 @@ static const struct brcms_chanvec restricted_set_2g_short = {
 	 0x00, 0x00, 0x00, 0x00}
 };
 
-/* Channel 165 */
-static const struct brcms_chanvec restricted_chan_165 = {
-	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-/* Channels 36 - 48 & 149 - 165 */
-static const struct brcms_chanvec restricted_low_hi = {
-	{0x00, 0x00, 0x00, 0x00, 0x10, 0x11, 0x01, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x20, 0x22, 0x22, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-/* Channels 12 - 14 */
-static const struct brcms_chanvec restricted_set_12_13_14 = {
-	{0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
 /* global memory to provide working buffer for expanded locale */
 
-static const struct brcms_chanvec *g_table_radar_set[] = {
-	&chanvec_none,
-	&radar_set1
-};
-
 static const struct brcms_chanvec *g_table_restricted_chan[] = {
 	&chanvec_none,		/* restricted_set_none */
 	&restricted_set_2g_short,
-	&restricted_chan_165,
-	&chanvec_all_5G,
-	&restricted_set_japan_legacy,
-	&chanvec_all_2G,	/* restricted_set_11d_2G */
-	&chanvec_all_5G,	/* restricted_set_11d_5G */
-	&restricted_low_hi,
-	&restricted_set_12_13_14
 };
 
 static const struct brcms_chanvec locale_2g_01_11 = {
@@ -445,11 +353,9 @@ static void brcms_c_locale_get_channels(const struct locale_info *locale,
  */
 static const struct locale_info locale_i = {	/* locale i. channel 1 - 13 */
 	LOCALE_CHAN_01_11 | LOCALE_CHAN_12_13,
-	LOCALE_RADAR_SET_NONE,
 	LOCALE_RESTRICTED_SET_2G_SHORT,
 	{QDB(19), QDB(19), QDB(19),
 	 QDB(19), QDB(19), QDB(19)},
-	{20, 20, 20, 0},
 	BRCMS_EIRP
 };
 
@@ -459,10 +365,8 @@ static const struct locale_info locale_i = {	/* locale i. channel 1 - 13 */
 static const struct locale_info locale_11 = {
 	/* locale 11. channel 36 - 48, 52 - 64, 100 - 140, 149 - 165 */
 	LOCALE_CHAN_36_64 | LOCALE_CHAN_100_140 | LOCALE_CHAN_149_165,
-	LOCALE_RADAR_SET_1,
 	LOCALE_RESTRICTED_NONE,
 	{QDB(21), QDB(21), QDB(21), QDB(21), QDB(21)},
-	{23, 23, 23, 30, 30},
 	BRCMS_EIRP | BRCMS_DFS_EU
 };
 
@@ -544,13 +448,6 @@ static const struct locale_mimo_info *brcms_c_get_mimo_5g(u8 locale_idx)
 	return g_mimo_5g_table[locale_idx];
 }
 
-static int
-brcms_c_country_aggregate_map(struct brcms_cm_info *wlc_cm, const char *ccode,
-			  char *mapped_ccode, uint *mapped_regrev)
-{
-	return false;
-}
-
 /*
  * Indicates whether the country provided is valid to pass
  * to cfg80211 or not.
@@ -620,7 +517,6 @@ brcms_c_countrycode_map(struct brcms_cm_info *wlc_cm, const char *ccode,
 	const struct country_info *country;
 	uint srom_regrev = wlc_cm->srom_regrev;
 	const char *srom_ccode = wlc_cm->srom_ccode;
-	int mapped;
 
 	/* check for currently supported ccode size */
 	if (strlen(ccode) > (BRCM_CNTRY_BUF_SZ - 1)) {
@@ -639,12 +535,7 @@ brcms_c_countrycode_map(struct brcms_cm_info *wlc_cm, const char *ccode,
 	 */
 	if (!strcmp(srom_ccode, ccode)) {
 		*mapped_regrev = srom_regrev;
-		mapped = 0;
 		wiphy_err(wlc->wiphy, "srom_code == ccode %s\n", __func__);
-	} else {
-		mapped =
-		    brcms_c_country_aggregate_map(wlc_cm, ccode, mapped_ccode,
-					      mapped_regrev);
 	}
 
 	/* find the matching built-in country definition */
@@ -902,8 +793,6 @@ brcms_c_channels_init(struct brcms_cm_info *wlc_cm,
 
 		wlc_cm->bandstate[band->bandunit].restricted_channels =
 		    g_table_restricted_chan[li->restricted_channels];
-		wlc_cm->bandstate[band->bandunit].radar_channels =
-		    g_table_radar_set[li->radar_channels];
 
 		/*
 		 * set the channel availability, masking out the channels
@@ -938,17 +827,11 @@ brcms_c_set_country_common(struct brcms_cm_info *wlc_cm,
 {
 	const struct locale_info *locale;
 	struct brcms_c_info *wlc = wlc_cm->wlc;
-	char prev_country_abbrev[BRCM_CNTRY_BUF_SZ];
 
 	/* save current country state */
 	wlc_cm->country = country;
 
-	memset(&prev_country_abbrev, 0, BRCM_CNTRY_BUF_SZ);
-	strncpy(prev_country_abbrev, wlc_cm->country_abbrev,
-		BRCM_CNTRY_BUF_SZ - 1);
-
 	strncpy(wlc_cm->country_abbrev, country_abbrev, BRCM_CNTRY_BUF_SZ - 1);
-	strncpy(wlc_cm->ccode, ccode, BRCM_CNTRY_BUF_SZ - 1);
 	wlc_cm->regrev = regrev;
 
 	if ((wlc->pub->_n_enab & SUPPORT_11N) !=
@@ -1014,16 +897,12 @@ brcms_c_set_countrycode_rev(struct brcms_cm_info *wlc_cm,
 static int
 brcms_c_set_countrycode(struct brcms_cm_info *wlc_cm, const char *ccode)
 {
-	char country_abbrev[BRCM_CNTRY_BUF_SZ];
-	strncpy(country_abbrev, ccode, BRCM_CNTRY_BUF_SZ);
-	return brcms_c_set_countrycode_rev(wlc_cm, country_abbrev, ccode, -1);
+	return brcms_c_set_countrycode_rev(wlc_cm, ccode, ccode, -1);
 }
 
 struct brcms_cm_info *brcms_c_channel_mgr_attach(struct brcms_c_info *wlc)
 {
 	struct brcms_cm_info *wlc_cm;
-	char country_abbrev[BRCM_CNTRY_BUF_SZ];
-	const struct country_info *country;
 	struct brcms_pub *pub = wlc->pub;
 	struct ssb_sprom *sprom = &wlc->hw->d11core->bus->sprom;
 
@@ -1040,21 +919,14 @@ struct brcms_cm_info *brcms_c_channel_mgr_attach(struct brcms_c_info *wlc)
 	if (sprom->alpha2 && brcms_c_country_valid(sprom->alpha2))
 		strncpy(wlc->pub->srom_ccode, sprom->alpha2, sizeof(sprom->alpha2));
 
-	/*
-	 * internal country information which must match
-	 * regulatory constraints in firmware
-	 */
-	memset(country_abbrev, 0, BRCM_CNTRY_BUF_SZ);
-	strncpy(country_abbrev, "X2", sizeof(country_abbrev) - 1);
-	country = brcms_c_country_lookup(wlc, country_abbrev);
-
 	/* save default country for exiting 11d regulatory mode */
-	strncpy(wlc->country_default, country_abbrev, BRCM_CNTRY_BUF_SZ - 1);
+	strncpy(wlc->country_default, "X2", BRCM_CNTRY_BUF_SZ - 1);
 
 	/* initialize autocountry_default to driver default */
-	strncpy(wlc->autocountry_default, "X2", BRCM_CNTRY_BUF_SZ - 1);
+	strncpy(wlc->autocountry_default, wlc->country_default,
+		BRCM_CNTRY_BUF_SZ - 1);
 
-	brcms_c_set_countrycode(wlc_cm, country_abbrev);
+	brcms_c_set_countrycode(wlc_cm, wlc->country_default);
 
 	return wlc_cm;
 }
-- 
cgit v1.1


From cf03c5dac83609f09d9f0e9fa3c09d86daed614d Mon Sep 17 00:00:00 2001
From: Seth Forshee <seth.forshee@canonical.com>
Date: Sat, 16 Jun 2012 07:47:52 -0500
Subject: brcm80211: smac: inform mac80211 of the X2 regulatory domain

brcmsmac implements enforcement of regulatory constraints internally,
using a Broadcom-specific world roaming domain named X2. Besides being
duplication of functionality this can also conflict with mac80211's
regulatory implementation, as mac80211 is unaware of the X2 domain and
thus might apply a more restrictive domain.

This patch is the first step in making brcmsmac cooperate with
mac80211's regulatory support. X2 is registered as a custom domain with
mac80211, so that at least both implementations will be enforcing the
same set of constraints. The internal enforcement of rules is kept for
now; this will be converted over to relying on mac80211 regulatory
enforcement in later patches.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmsmac/channel.c  | 385 +++++++++++----------
 drivers/net/wireless/brcm80211/brcmsmac/channel.h  |   1 +
 .../net/wireless/brcm80211/brcmsmac/mac80211_if.c  |   2 +
 3 files changed, 210 insertions(+), 178 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
index c311ef7..65ef60b 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
@@ -15,7 +15,9 @@
  */
 
 #include <linux/types.h>
+#include <net/cfg80211.h>
 #include <net/mac80211.h>
+#include <net/regulatory.h>
 
 #include <defs.h>
 #include "pub.h"
@@ -23,6 +25,7 @@
 #include "main.h"
 #include "stf.h"
 #include "channel.h"
+#include "mac80211_if.h"
 
 /* QDB() macro takes a dB value and converts to a quarter dB value */
 #define QDB(n) ((n) * BRCMS_TXPWR_DB_FACTOR)
@@ -108,6 +111,39 @@
 				 (((c) < 100) ? 2 : \
 				 (((c) < 149) ? 3 : 4))))
 
+#define BRCM_2GHZ_2412_2462	REG_RULE(2412-10, 2462+10, 40, 0, 19, 0)
+#define BRCM_2GHZ_2467_2472	REG_RULE(2467-10, 2472+10, 20, 0, 19, \
+					 NL80211_RRF_PASSIVE_SCAN | \
+					 NL80211_RRF_NO_IBSS)
+
+#define BRCM_5GHZ_5180_5240	REG_RULE(5180-10, 5240+10, 40, 0, 21, \
+					 NL80211_RRF_PASSIVE_SCAN | \
+					 NL80211_RRF_NO_IBSS)
+#define BRCM_5GHZ_5260_5320	REG_RULE(5260-10, 5320+10, 40, 0, 21, \
+					 NL80211_RRF_PASSIVE_SCAN | \
+					 NL80211_RRF_DFS | \
+					 NL80211_RRF_NO_IBSS)
+#define BRCM_5GHZ_5500_5700	REG_RULE(5500-10, 5700+10, 40, 0, 21, \
+					 NL80211_RRF_PASSIVE_SCAN | \
+					 NL80211_RRF_DFS | \
+					 NL80211_RRF_NO_IBSS)
+#define BRCM_5GHZ_5745_5825	REG_RULE(5745-10, 5825+10, 40, 0, 21, \
+					 NL80211_RRF_PASSIVE_SCAN | \
+					 NL80211_RRF_NO_IBSS)
+
+static const struct ieee80211_regdomain brcms_regdom_x2 = {
+	.n_reg_rules = 7,
+	.alpha2 = "X2",
+	.reg_rules = {
+		BRCM_2GHZ_2412_2462,
+		BRCM_2GHZ_2467_2472,
+		BRCM_5GHZ_5180_5240,
+		BRCM_5GHZ_5260_5320,
+		BRCM_5GHZ_5500_5700,
+		BRCM_5GHZ_5745_5825,
+	}
+};
+
 struct brcms_cm_band {
 	/* struct locale_info flags */
 	u8 locale_flags;
@@ -137,14 +173,15 @@ struct country_info {
 	const u8 locale_mimo_5G;	/* 5G mimo info */
 };
 
+struct brcms_regd {
+	struct country_info country;
+	const struct ieee80211_regdomain *regdomain;
+};
+
 struct brcms_cm_info {
 	struct brcms_pub *pub;
 	struct brcms_c_info *wlc;
-	char srom_ccode[BRCM_CNTRY_BUF_SZ];	/* Country Code in SROM */
-	uint srom_regrev;	/* Regulatory Rev for the SROM ccode */
-	const struct country_info *country;	/* current country def */
-	uint regrev;		/* current Regulatory Revision */
-	char country_abbrev[BRCM_CNTRY_BUF_SZ];	/* current advertised ccode */
+	const struct brcms_regd *world_regd;
 	/* per-band state (one per phy/radio) */
 	struct brcms_cm_band bandstate[MAXBANDS];
 	/* quiet channels currently for radar sensitivity or 11h support */
@@ -408,12 +445,12 @@ static const struct locale_mimo_info *g_mimo_5g_table[] = {
 	&locale_11n
 };
 
-static const struct {
-	char abbrev[BRCM_CNTRY_BUF_SZ];	/* country abbreviation */
-	struct country_info country;
-} cntry_locales[] = {
+static const struct brcms_regd cntry_locales[] = {
+	/* Worldwide RoW 2, must always be at index 0 */
 	{
-	"X2", LOCALES(i, 11, bn, 11n)},	/* Worldwide RoW 2 */
+		.country = LOCALES(i, 11, bn, 11n),
+		.regdomain = &brcms_regdom_x2,
+	},
 };
 
 static const struct locale_info *brcms_c_get_locale_2g(u8 locale_idx)
@@ -482,93 +519,24 @@ static bool brcms_c_country_valid(const char *ccode)
 	return true;
 }
 
-/* Lookup a country info structure from a null terminated country
- * abbreviation and regrev directly with no translation.
- */
-static const struct country_info *
-brcms_c_country_lookup_direct(const char *ccode, uint regrev)
+static const struct brcms_regd *brcms_world_regd(const char *regdom, int len)
 {
-	uint size, i;
+	const struct brcms_regd *regd = NULL;
+	int i;
 
-	/* Should just return 0 for single locale driver. */
-	/* Keep it this way in case we add more locales. (for now anyway) */
-
-	/*
-	 * all other country def arrays are for regrev == 0, so if
-	 * regrev is non-zero, fail
-	 */
-	if (regrev > 0)
-		return NULL;
-
-	/* find matched table entry from country code */
-	size = ARRAY_SIZE(cntry_locales);
-	for (i = 0; i < size; i++) {
-		if (strcmp(ccode, cntry_locales[i].abbrev) == 0)
-			return &cntry_locales[i].country;
-	}
-	return NULL;
-}
-
-static const struct country_info *
-brcms_c_countrycode_map(struct brcms_cm_info *wlc_cm, const char *ccode,
-			char *mapped_ccode, uint *mapped_regrev)
-{
-	struct brcms_c_info *wlc = wlc_cm->wlc;
-	const struct country_info *country;
-	uint srom_regrev = wlc_cm->srom_regrev;
-	const char *srom_ccode = wlc_cm->srom_ccode;
-
-	/* check for currently supported ccode size */
-	if (strlen(ccode) > (BRCM_CNTRY_BUF_SZ - 1)) {
-		wiphy_err(wlc->wiphy, "wl%d: %s: ccode \"%s\" too long for "
-			  "match\n", wlc->pub->unit, __func__, ccode);
-		return NULL;
-	}
-
-	/* default mapping is the given ccode and regrev 0 */
-	strncpy(mapped_ccode, ccode, BRCM_CNTRY_BUF_SZ);
-	*mapped_regrev = 0;
-
-	/* If the desired country code matches the srom country code,
-	 * then the mapped country is the srom regulatory rev.
-	 * Otherwise look for an aggregate mapping.
-	 */
-	if (!strcmp(srom_ccode, ccode)) {
-		*mapped_regrev = srom_regrev;
-		wiphy_err(wlc->wiphy, "srom_code == ccode %s\n", __func__);
-	}
-
-	/* find the matching built-in country definition */
-	country = brcms_c_country_lookup_direct(mapped_ccode, *mapped_regrev);
-
-	/* if there is not an exact rev match, default to rev zero */
-	if (country == NULL && *mapped_regrev != 0) {
-		*mapped_regrev = 0;
-		country =
-		    brcms_c_country_lookup_direct(mapped_ccode, *mapped_regrev);
+	for (i = 0; i < ARRAY_SIZE(cntry_locales); i++) {
+		if (!strncmp(regdom, cntry_locales[i].regdomain->alpha2, len)) {
+			regd = &cntry_locales[i];
+			break;
+		}
 	}
 
-	return country;
+	return regd;
 }
 
-/* Lookup a country info structure from a null terminated country code
- * The lookup is case sensitive.
- */
-static const struct country_info *
-brcms_c_country_lookup(struct brcms_c_info *wlc, const char *ccode)
+static const struct brcms_regd *brcms_default_world_regd(void)
 {
-	const struct country_info *country;
-	char mapped_ccode[BRCM_CNTRY_BUF_SZ];
-	uint mapped_regrev;
-
-	/*
-	 * map the country code to a built-in country code, regrev, and
-	 * country_info struct
-	 */
-	country = brcms_c_countrycode_map(wlc->cmi, ccode, mapped_ccode,
-					  &mapped_regrev);
-
-	return country;
+	return &cntry_locales[0];
 }
 
 /*
@@ -634,12 +602,6 @@ static bool brcms_c_japan_ccode(const char *ccode)
 		(ccode[1] == 'P' || (ccode[1] >= '1' && ccode[1] <= '9')));
 }
 
-/* Returns true if currently set country is Japan or variant */
-static bool brcms_c_japan(struct brcms_c_info *wlc)
-{
-	return brcms_c_japan_ccode(wlc->cmi->country_abbrev);
-}
-
 static void
 brcms_c_channel_min_txpower_limits_with_local_constraint(
 		struct brcms_cm_info *wlc_cm, struct txpwr_limits *txpwr,
@@ -743,8 +705,8 @@ static void brcms_c_channels_commit(struct brcms_cm_info *wlc_cm)
 		mboolset(wlc->pub->radio_disabled, WL_RADIO_COUNTRY_DISABLE);
 		wiphy_err(wlc->wiphy, "wl%d: %s: no valid channel for \"%s\" "
 			  "nbands %d bandlocked %d\n", wlc->pub->unit,
-			  __func__, wlc_cm->country_abbrev, wlc->pub->_nbands,
-			  wlc->bandlocked);
+			  __func__, wlc_cm->world_regd->regdomain->alpha2,
+			  wlc->pub->_nbands, wlc->bandlocked);
 	} else if (mboolisset(wlc->pub->radio_disabled,
 			      WL_RADIO_COUNTRY_DISABLE)) {
 		/*
@@ -753,15 +715,6 @@ static void brcms_c_channels_commit(struct brcms_cm_info *wlc_cm)
 		 */
 		mboolclr(wlc->pub->radio_disabled, WL_RADIO_COUNTRY_DISABLE);
 	}
-
-	/*
-	 * Now that the country abbreviation is set, if the radio supports 2G,
-	 * then set channel 14 restrictions based on the new locale.
-	 */
-	if (wlc->pub->_nbands > 1 || wlc->band->bandtype == BRCM_BAND_2G)
-		wlc_phy_chanspec_ch14_widefilter_set(wlc->band->pi,
-						     brcms_c_japan(wlc) ? true :
-						     false);
 }
 
 static int
@@ -820,20 +773,13 @@ brcms_c_channels_init(struct brcms_cm_info *wlc_cm,
  * information found with the country code.
  */
 static void
-brcms_c_set_country_common(struct brcms_cm_info *wlc_cm,
-		       const char *country_abbrev,
-		       const char *ccode, uint regrev,
-		       const struct country_info *country)
+brcms_c_set_country(struct brcms_cm_info *wlc_cm,
+		    const struct brcms_regd *regd)
 {
+	const struct country_info *country = &regd->country;
 	const struct locale_info *locale;
 	struct brcms_c_info *wlc = wlc_cm->wlc;
 
-	/* save current country state */
-	wlc_cm->country = country;
-
-	strncpy(wlc_cm->country_abbrev, country_abbrev, BRCM_CNTRY_BUF_SZ - 1);
-	wlc_cm->regrev = regrev;
-
 	if ((wlc->pub->_n_enab & SUPPORT_11N) !=
 	    wlc->protection->nmode_user)
 		brcms_c_set_nmode(wlc);
@@ -852,59 +798,13 @@ brcms_c_set_country_common(struct brcms_cm_info *wlc_cm,
 	return;
 }
 
-static int
-brcms_c_set_countrycode_rev(struct brcms_cm_info *wlc_cm,
-			const char *country_abbrev,
-			const char *ccode, int regrev)
-{
-	const struct country_info *country;
-	char mapped_ccode[BRCM_CNTRY_BUF_SZ];
-	uint mapped_regrev;
-
-	/* if regrev is -1, lookup the mapped country code,
-	 * otherwise use the ccode and regrev directly
-	 */
-	if (regrev == -1) {
-		/*
-		 * map the country code to a built-in country
-		 * code, regrev, and country_info
-		 */
-		country =
-		    brcms_c_countrycode_map(wlc_cm, ccode, mapped_ccode,
-					&mapped_regrev);
-	} else {
-		/* find the matching built-in country definition */
-		country = brcms_c_country_lookup_direct(ccode, regrev);
-		strncpy(mapped_ccode, ccode, BRCM_CNTRY_BUF_SZ);
-		mapped_regrev = regrev;
-	}
-
-	if (country == NULL)
-		return -EINVAL;
-
-	/* set the driver state for the country */
-	brcms_c_set_country_common(wlc_cm, country_abbrev, mapped_ccode,
-			       mapped_regrev, country);
-
-	return 0;
-}
-
-/*
- * set the driver's current country and regulatory information using
- * a country code as the source. Lookup built in country information
- * found with the country code.
- */
-static int
-brcms_c_set_countrycode(struct brcms_cm_info *wlc_cm, const char *ccode)
-{
-	return brcms_c_set_countrycode_rev(wlc_cm, ccode, ccode, -1);
-}
-
 struct brcms_cm_info *brcms_c_channel_mgr_attach(struct brcms_c_info *wlc)
 {
 	struct brcms_cm_info *wlc_cm;
 	struct brcms_pub *pub = wlc->pub;
 	struct ssb_sprom *sprom = &wlc->hw->d11core->bus->sprom;
+	const char *ccode = sprom->alpha2;
+	int ccode_len = sizeof(sprom->alpha2);
 
 	BCMMSG(wlc->wiphy, "wl%d\n", wlc->pub->unit);
 
@@ -916,17 +816,27 @@ struct brcms_cm_info *brcms_c_channel_mgr_attach(struct brcms_c_info *wlc)
 	wlc->cmi = wlc_cm;
 
 	/* store the country code for passing up as a regulatory hint */
-	if (sprom->alpha2 && brcms_c_country_valid(sprom->alpha2))
-		strncpy(wlc->pub->srom_ccode, sprom->alpha2, sizeof(sprom->alpha2));
+	wlc_cm->world_regd = brcms_world_regd(ccode, ccode_len);
+	if (brcms_c_country_valid(ccode))
+		strncpy(wlc->pub->srom_ccode, ccode, ccode_len);
+
+	/*
+	 * If no custom world domain is found in the SROM, use the
+	 * default "X2" domain.
+	 */
+	if (!wlc_cm->world_regd) {
+		wlc_cm->world_regd = brcms_default_world_regd();
+		ccode = wlc_cm->world_regd->regdomain->alpha2;
+		ccode_len = BRCM_CNTRY_BUF_SZ - 1;
+	}
 
 	/* save default country for exiting 11d regulatory mode */
-	strncpy(wlc->country_default, "X2", BRCM_CNTRY_BUF_SZ - 1);
+	strncpy(wlc->country_default, ccode, ccode_len);
 
 	/* initialize autocountry_default to driver default */
-	strncpy(wlc->autocountry_default, wlc->country_default,
-		BRCM_CNTRY_BUF_SZ - 1);
+	strncpy(wlc->autocountry_default, ccode, ccode_len);
 
-	brcms_c_set_countrycode(wlc_cm, wlc->country_default);
+	brcms_c_set_country(wlc_cm, wlc_cm->world_regd);
 
 	return wlc_cm;
 }
@@ -994,13 +904,7 @@ brcms_c_channel_reg_limits(struct brcms_cm_info *wlc_cm, u16 chanspec,
 
 	memset(txpwr, 0, sizeof(struct txpwr_limits));
 
-	if (!brcms_c_valid_chanspec_db(wlc_cm, chanspec)) {
-		country = brcms_c_country_lookup(wlc, wlc->autocountry_default);
-		if (country == NULL)
-			return;
-	} else {
-		country = wlc_cm->country;
-	}
+	country = &wlc_cm->world_regd->country;
 
 	chan = CHSPEC_CHANNEL(chanspec);
 	band = wlc->bandstate[chspec_bandunit(chanspec)];
@@ -1252,3 +1156,128 @@ bool brcms_c_valid_chanspec_db(struct brcms_cm_info *wlc_cm, u16 chspec)
 {
 	return brcms_c_valid_chanspec_ext(wlc_cm, chspec, true);
 }
+
+static bool brcms_is_radar_freq(u16 center_freq)
+{
+	return center_freq >= 5260 && center_freq <= 5700;
+}
+
+static void brcms_reg_apply_radar_flags(struct wiphy *wiphy)
+{
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_channel *ch;
+	int i;
+
+	sband = wiphy->bands[IEEE80211_BAND_5GHZ];
+	if (!sband)
+		return;
+
+	for (i = 0; i < sband->n_channels; i++) {
+		ch = &sband->channels[i];
+
+		if (!brcms_is_radar_freq(ch->center_freq))
+			continue;
+
+		/*
+		 * All channels in this range should be passive and have
+		 * DFS enabled.
+		 */
+		if (!(ch->flags & IEEE80211_CHAN_DISABLED))
+			ch->flags |= IEEE80211_CHAN_RADAR |
+				     IEEE80211_CHAN_NO_IBSS |
+				     IEEE80211_CHAN_PASSIVE_SCAN;
+	}
+}
+
+static void
+brcms_reg_apply_beaconing_flags(struct wiphy *wiphy,
+				enum nl80211_reg_initiator initiator)
+{
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_channel *ch;
+	const struct ieee80211_reg_rule *rule;
+	int band, i, ret;
+
+	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+		sband = wiphy->bands[band];
+		if (!sband)
+			continue;
+
+		for (i = 0; i < sband->n_channels; i++) {
+			ch = &sband->channels[i];
+
+			if (ch->flags &
+			    (IEEE80211_CHAN_DISABLED | IEEE80211_CHAN_RADAR))
+				continue;
+
+			if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) {
+				ret = freq_reg_info(wiphy, ch->center_freq,
+						    0, &rule);
+				if (ret)
+					continue;
+
+				if (!(rule->flags & NL80211_RRF_NO_IBSS))
+					ch->flags &= ~IEEE80211_CHAN_NO_IBSS;
+				if (!(rule->flags & NL80211_RRF_PASSIVE_SCAN))
+					ch->flags &=
+						~IEEE80211_CHAN_PASSIVE_SCAN;
+			} else if (ch->beacon_found) {
+				ch->flags &= ~(IEEE80211_CHAN_NO_IBSS |
+					       IEEE80211_CHAN_PASSIVE_SCAN);
+			}
+		}
+	}
+}
+
+static int brcms_reg_notifier(struct wiphy *wiphy,
+			      struct regulatory_request *request)
+{
+	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
+	struct brcms_info *wl = hw->priv;
+	struct brcms_c_info *wlc = wl->wlc;
+
+	brcms_reg_apply_radar_flags(wiphy);
+
+	if (request->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE)
+		brcms_reg_apply_beaconing_flags(wiphy, request->initiator);
+
+	if (wlc->pub->_nbands > 1 || wlc->band->bandtype == BRCM_BAND_2G)
+		wlc_phy_chanspec_ch14_widefilter_set(wlc->band->pi,
+					brcms_c_japan_ccode(request->alpha2));
+
+	return 0;
+}
+
+void brcms_c_regd_init(struct brcms_c_info *wlc)
+{
+	struct wiphy *wiphy = wlc->wiphy;
+	const struct brcms_regd *regd = wlc->cmi->world_regd;
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_channel *ch;
+	struct brcms_chanvec sup_chan;
+	struct brcms_band *band;
+	int band_idx, i;
+
+	/* Disable any channels not supported by the phy */
+	for (band_idx = 0; band_idx < IEEE80211_NUM_BANDS; band_idx++) {
+		if (band_idx == IEEE80211_BAND_2GHZ)
+			band = wlc->bandstate[BAND_2G_INDEX];
+		else
+			band = wlc->bandstate[BAND_5G_INDEX];
+		wlc_phy_chanspec_band_validch(band->pi, band->bandtype,
+					      &sup_chan);
+
+		sband = wiphy->bands[band_idx];
+		for (i = 0; i < sband->n_channels; i++) {
+			ch = &sband->channels[i];
+			if (!isset(sup_chan.vec, ch->hw_value))
+				ch->flags |= IEEE80211_CHAN_DISABLED;
+		}
+	}
+
+	wlc->wiphy->reg_notifier = brcms_reg_notifier;
+	wlc->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
+			     WIPHY_FLAG_STRICT_REGULATORY;
+	wiphy_apply_custom_regulatory(wlc->wiphy, regd->regdomain);
+	brcms_reg_apply_beaconing_flags(wiphy, NL80211_REGDOM_SET_BY_DRIVER);
+}
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.h b/drivers/net/wireless/brcm80211/brcmsmac/channel.h
index 808cb4f..de9887d95 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/channel.h
+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.h
@@ -49,5 +49,6 @@ extern void brcms_c_channel_reg_limits(struct brcms_cm_info *wlc_cm,
 extern void brcms_c_channel_set_chanspec(struct brcms_cm_info *wlc_cm,
 				     u16 chanspec,
 				     u8 local_constraint_qdbm);
+extern void brcms_c_regd_init(struct brcms_c_info *wlc);
 
 #endif				/* _WLC_CHANNEL_H */
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
index 341e06a..2d5a404 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
@@ -1050,6 +1050,8 @@ static struct brcms_info *brcms_attach(struct bcma_device *pdev)
 		goto fail;
 	}
 
+	brcms_c_regd_init(wl->wlc);
+
 	memcpy(perm, &wl->pub->cur_etheraddr, ETH_ALEN);
 	if (WARN_ON(!is_valid_ether_addr(perm)))
 		goto fail;
-- 
cgit v1.1


From 2ab631f48cac65864a61007215187cb7511b0846 Mon Sep 17 00:00:00 2001
From: Seth Forshee <seth.forshee@canonical.com>
Date: Sat, 16 Jun 2012 07:47:53 -0500
Subject: brcm80211: smac: enable/disable radio on regulatory updates

Currently the radio disable state is only updated during initialization,
and it's only checked against the internal world domain. This is
unnecessary, as there are always valid channels against this domain.
Instead, check whether any channels are enabled in the regulatory
notifier and update the radio state accordingly.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmsmac/channel.c | 67 +++++++++--------------
 1 file changed, 26 insertions(+), 41 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
index 65ef60b..3951ccf 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
@@ -677,46 +677,6 @@ brcms_c_channel_min_txpower_limits_with_local_constraint(
 
 }
 
-/* Update the radio state (enable/disable) and tx power targets
- * based on a new set of channel/regulatory information
- */
-static void brcms_c_channels_commit(struct brcms_cm_info *wlc_cm)
-{
-	struct brcms_c_info *wlc = wlc_cm->wlc;
-	uint chan;
-
-	/* search for the existence of any valid channel */
-	for (chan = 0; chan < MAXCHANNEL; chan++) {
-		if (brcms_c_valid_channel20_db(wlc->cmi, chan))
-			break;
-	}
-	if (chan == MAXCHANNEL)
-		chan = INVCHANNEL;
-
-	/*
-	 * based on the channel search above, set or
-	 * clear WL_RADIO_COUNTRY_DISABLE.
-	 */
-	if (chan == INVCHANNEL) {
-		/*
-		 * country/locale with no valid channels, set
-		 * the radio disable bit
-		 */
-		mboolset(wlc->pub->radio_disabled, WL_RADIO_COUNTRY_DISABLE);
-		wiphy_err(wlc->wiphy, "wl%d: %s: no valid channel for \"%s\" "
-			  "nbands %d bandlocked %d\n", wlc->pub->unit,
-			  __func__, wlc_cm->world_regd->regdomain->alpha2,
-			  wlc->pub->_nbands, wlc->bandlocked);
-	} else if (mboolisset(wlc->pub->radio_disabled,
-			      WL_RADIO_COUNTRY_DISABLE)) {
-		/*
-		 * country/locale with valid channel, clear
-		 * the radio disable bit
-		 */
-		mboolclr(wlc->pub->radio_disabled, WL_RADIO_COUNTRY_DISABLE);
-	}
-}
-
 static int
 brcms_c_channels_init(struct brcms_cm_info *wlc_cm,
 		      const struct country_info *country)
@@ -762,7 +722,6 @@ brcms_c_channels_init(struct brcms_cm_info *wlc_cm,
 	}
 
 	brcms_c_quiet_channels_reset(wlc_cm);
-	brcms_c_channels_commit(wlc_cm);
 
 	return 0;
 }
@@ -1235,12 +1194,38 @@ static int brcms_reg_notifier(struct wiphy *wiphy,
 	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
 	struct brcms_info *wl = hw->priv;
 	struct brcms_c_info *wlc = wl->wlc;
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_channel *ch;
+	int band, i;
+	bool ch_found = false;
 
 	brcms_reg_apply_radar_flags(wiphy);
 
 	if (request->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE)
 		brcms_reg_apply_beaconing_flags(wiphy, request->initiator);
 
+	/* Disable radio if all channels disallowed by regulatory */
+	for (band = 0; !ch_found && band < IEEE80211_NUM_BANDS; band++) {
+		sband = wiphy->bands[band];
+		if (!sband)
+			continue;
+
+		for (i = 0; !ch_found && i < sband->n_channels; i++) {
+			ch = &sband->channels[i];
+
+			if (!(ch->flags & IEEE80211_CHAN_DISABLED))
+				ch_found = true;
+		}
+	}
+
+	if (ch_found) {
+		mboolclr(wlc->pub->radio_disabled, WL_RADIO_COUNTRY_DISABLE);
+	} else {
+		mboolset(wlc->pub->radio_disabled, WL_RADIO_COUNTRY_DISABLE);
+		wiphy_err(wlc->wiphy, "wl%d: %s: no valid channel for \"%s\"\n",
+			  wlc->pub->unit, __func__, request->alpha2);
+	}
+
 	if (wlc->pub->_nbands > 1 || wlc->band->bandtype == BRCM_BAND_2G)
 		wlc_phy_chanspec_ch14_widefilter_set(wlc->band->pi,
 					brcms_c_japan_ccode(request->alpha2));
-- 
cgit v1.1


From 2cf5089ed5ae4a8f73427234cb83c42eaaf34d46 Mon Sep 17 00:00:00 2001
From: Seth Forshee <seth.forshee@canonical.com>
Date: Sat, 16 Jun 2012 07:47:54 -0500
Subject: brcm80211: smac: use mac80211 channel data for tx power limits

Currently the limits from the internal X2 domain are used, regardless
of what regulatory rules are in effect. Instead use the power limits set
by the higher-level regulatory support.

The rules for the MIMO power limits are still always derived from the
world domain, pending guidance from Broadcom as to how these need to be
handled. This will be fixed later, but using the limits from the world
domain works for now.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmsmac/channel.c | 73 +++++------------------
 1 file changed, 14 insertions(+), 59 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
index 3951ccf..bdb11ff 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
@@ -74,15 +74,6 @@
 /* max of BAND_5G_PWR_LVLS and 14 for 2.4 GHz */
 #define BRCMS_MAXPWR_MIMO_TBL_SIZE	14
 
-/* power level in group of 2.4GHz band channels:
- * maxpwr[0] - CCK  channels [1]
- * maxpwr[1] - CCK  channels [2-10]
- * maxpwr[2] - CCK  channels [11-14]
- * maxpwr[3] - OFDM channels [1]
- * maxpwr[4] - OFDM channels [2-10]
- * maxpwr[5] - OFDM channels [11-14]
- */
-
 /* maxpwr mapping to 5GHz band channels:
  * maxpwr[0] - channels [34-48]
  * maxpwr[1] - channels [52-60]
@@ -101,10 +92,6 @@
 #define LOCALES(band2, band5, mimo2, mimo5) \
 		{LC_2G(band2), LC_5G(band5), LC(mimo2), LC(mimo5)}
 
-/* macro to get 2.4 GHz channel group index for tx power */
-#define CHANNEL_POWER_IDX_2G_CCK(c) (((c) < 2) ? 0 : (((c) < 11) ? 1 : 2))
-#define CHANNEL_POWER_IDX_2G_OFDM(c) (((c) < 2) ? 3 : (((c) < 11) ? 4 : 5))
-
 /* macro to get 5 GHz channel group index for tx power */
 #define CHANNEL_POWER_IDX_5G(c) (((c) < 52) ? 0 : \
 				 (((c) < 62) ? 1 : \
@@ -194,8 +181,6 @@ struct locale_info {
 	u32 valid_channels;
 	/* List of channels used only if APs are detected */
 	u8 restricted_channels;
-	/* Max tx pwr in qdBm for each sub-band */
-	s8 maxpwr[BRCMS_MAXPWR_TBL_SIZE];
 	u8 flags;
 };
 
@@ -391,8 +376,6 @@ static void brcms_c_locale_get_channels(const struct locale_info *locale,
 static const struct locale_info locale_i = {	/* locale i. channel 1 - 13 */
 	LOCALE_CHAN_01_11 | LOCALE_CHAN_12_13,
 	LOCALE_RESTRICTED_SET_2G_SHORT,
-	{QDB(19), QDB(19), QDB(19),
-	 QDB(19), QDB(19), QDB(19)},
 	BRCMS_EIRP
 };
 
@@ -403,7 +386,6 @@ static const struct locale_info locale_11 = {
 	/* locale 11. channel 36 - 48, 52 - 64, 100 - 140, 149 - 165 */
 	LOCALE_CHAN_36_64 | LOCALE_CHAN_100_140 | LOCALE_CHAN_149_165,
 	LOCALE_RESTRICTED_NONE,
-	{QDB(21), QDB(21), QDB(21), QDB(21), QDB(21)},
 	BRCMS_EIRP | BRCMS_DFS_EU
 };
 
@@ -847,6 +829,7 @@ brcms_c_channel_reg_limits(struct brcms_cm_info *wlc_cm, u16 chanspec,
 		       struct txpwr_limits *txpwr)
 {
 	struct brcms_c_info *wlc = wlc_cm->wlc;
+	struct ieee80211_channel *ch = wlc->pub->ieee_hw->conf.channel;
 	uint i;
 	uint chan;
 	int maxpwr;
@@ -855,7 +838,6 @@ brcms_c_channel_reg_limits(struct brcms_cm_info *wlc_cm, u16 chanspec,
 	struct brcms_band *band;
 	const struct locale_info *li;
 	int conducted_max = BRCMS_TXPWR_MAX;
-	int conducted_ofdm_max = BRCMS_TXPWR_MAX;
 	const struct locale_mimo_info *li_mimo;
 	int maxpwr20, maxpwr40;
 	int maxpwr_idx;
@@ -863,6 +845,9 @@ brcms_c_channel_reg_limits(struct brcms_cm_info *wlc_cm, u16 chanspec,
 
 	memset(txpwr, 0, sizeof(struct txpwr_limits));
 
+	if (WARN_ON(!ch))
+		return;
+
 	country = &wlc_cm->world_regd->country;
 
 	chan = CHSPEC_CHANNEL(chanspec);
@@ -875,49 +860,24 @@ brcms_c_channel_reg_limits(struct brcms_cm_info *wlc_cm, u16 chanspec,
 	    brcms_c_get_mimo_5g(country->locale_mimo_5G) :
 	    brcms_c_get_mimo_2g(country->locale_mimo_2G);
 
-	if (li->flags & BRCMS_EIRP) {
-		delta = band->antgain;
-	} else {
-		delta = 0;
-		if (band->antgain > QDB(6))
-			delta = band->antgain - QDB(6);	/* Excess over 6 dB */
-	}
+	delta = band->antgain;
 
-	if (li == &locale_i) {
+	if (li == &locale_i)
 		conducted_max = QDB(22);
-		conducted_ofdm_max = QDB(22);
-	}
+
+	maxpwr = QDB(ch->max_power) - delta;
+	maxpwr = max(maxpwr, 0);
+	maxpwr = min(maxpwr, conducted_max);
 
 	/* CCK txpwr limits for 2.4G band */
 	if (band->bandtype == BRCM_BAND_2G) {
-		maxpwr = li->maxpwr[CHANNEL_POWER_IDX_2G_CCK(chan)];
-
-		maxpwr = maxpwr - delta;
-		maxpwr = max(maxpwr, 0);
-		maxpwr = min(maxpwr, conducted_max);
-
 		for (i = 0; i < BRCMS_NUM_RATES_CCK; i++)
 			txpwr->cck[i] = (u8) maxpwr;
 	}
 
-	/* OFDM txpwr limits for 2.4G or 5G bands */
-	if (band->bandtype == BRCM_BAND_2G)
-		maxpwr = li->maxpwr[CHANNEL_POWER_IDX_2G_OFDM(chan)];
-	else
-		maxpwr = li->maxpwr[CHANNEL_POWER_IDX_5G(chan)];
-
-	maxpwr = maxpwr - delta;
-	maxpwr = max(maxpwr, 0);
-	maxpwr = min(maxpwr, conducted_ofdm_max);
-
-	/* Keep OFDM lmit below CCK limit */
-	if (band->bandtype == BRCM_BAND_2G)
-		maxpwr = min_t(int, maxpwr, txpwr->cck[0]);
-
-	for (i = 0; i < BRCMS_NUM_RATES_OFDM; i++)
+	for (i = 0; i < BRCMS_NUM_RATES_OFDM; i++) {
 		txpwr->ofdm[i] = (u8) maxpwr;
 
-	for (i = 0; i < BRCMS_NUM_RATES_OFDM; i++) {
 		/*
 		 * OFDM 40 MHz SISO has the same power as the corresponding
 		 * MCS0-7 rate unless overriden by the locale specific code.
@@ -932,14 +892,9 @@ brcms_c_channel_reg_limits(struct brcms_cm_info *wlc_cm, u16 chanspec,
 		txpwr->ofdm_40_cdd[i] = 0;
 	}
 
-	/* MIMO/HT specific limits */
-	if (li_mimo->flags & BRCMS_EIRP) {
-		delta = band->antgain;
-	} else {
-		delta = 0;
-		if (band->antgain > QDB(6))
-			delta = band->antgain - QDB(6);	/* Excess over 6 dB */
-	}
+	delta = 0;
+	if (band->antgain > QDB(6))
+		delta = band->antgain - QDB(6);	/* Excess over 6 dB */
 
 	if (band->bandtype == BRCM_BAND_2G)
 		maxpwr_idx = (chan - 1);
-- 
cgit v1.1


From 853346d8b60738467581d1cd9ccb678aeb086121 Mon Sep 17 00:00:00 2001
From: Seth Forshee <seth.forshee@canonical.com>
Date: Sat, 16 Jun 2012 07:47:55 -0500
Subject: brcm80211: smac: don't validate channels against internal regulatory
 data

The core regulatory support will disable channels not allowed by
regulatory rules, so brcmsmac doesn't need to check whether or not the
requested channel is permitted by regulatory.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmsmac/channel.c | 344 +---------------------
 1 file changed, 6 insertions(+), 338 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
index bdb11ff..04e6a6e 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
@@ -30,40 +30,6 @@
 /* QDB() macro takes a dB value and converts to a quarter dB value */
 #define QDB(n) ((n) * BRCMS_TXPWR_DB_FACTOR)
 
-#define  LOCALE_CHAN_01_11	 (1<<0)
-#define  LOCALE_CHAN_12_13	 (1<<1)
-#define  LOCALE_CHAN_14		 (1<<2)
-#define  LOCALE_SET_5G_LOW_JP1   (1<<3)	/* 34-48, step 2 */
-#define  LOCALE_SET_5G_LOW_JP2   (1<<4)	/* 34-46, step 4 */
-#define  LOCALE_SET_5G_LOW1      (1<<5)	/* 36-48, step 4 */
-#define  LOCALE_SET_5G_LOW2      (1<<6)	/* 52 */
-#define  LOCALE_SET_5G_LOW3      (1<<7)	/* 56-64, step 4 */
-#define  LOCALE_SET_5G_MID1      (1<<8)	/* 100-116, step 4 */
-#define  LOCALE_SET_5G_MID2	 (1<<9)	/* 120-124, step 4 */
-#define  LOCALE_SET_5G_MID3      (1<<10)	/* 128 */
-#define  LOCALE_SET_5G_HIGH1     (1<<11)	/* 132-140, step 4 */
-#define  LOCALE_SET_5G_HIGH2     (1<<12)	/* 149-161, step 4 */
-#define  LOCALE_SET_5G_HIGH3     (1<<13)	/* 165 */
-#define  LOCALE_CHAN_52_140_ALL  (1<<14)
-#define  LOCALE_SET_5G_HIGH4     (1<<15)	/* 184-216 */
-
-#define  LOCALE_CHAN_36_64	(LOCALE_SET_5G_LOW1 | \
-				 LOCALE_SET_5G_LOW2 | \
-				 LOCALE_SET_5G_LOW3)
-#define  LOCALE_CHAN_52_64	(LOCALE_SET_5G_LOW2 | LOCALE_SET_5G_LOW3)
-#define  LOCALE_CHAN_100_124	(LOCALE_SET_5G_MID1 | LOCALE_SET_5G_MID2)
-#define  LOCALE_CHAN_100_140	(LOCALE_SET_5G_MID1 | LOCALE_SET_5G_MID2 | \
-				  LOCALE_SET_5G_MID3 | LOCALE_SET_5G_HIGH1)
-#define  LOCALE_CHAN_149_165	(LOCALE_SET_5G_HIGH2 | LOCALE_SET_5G_HIGH3)
-#define  LOCALE_CHAN_184_216	LOCALE_SET_5G_HIGH4
-
-#define  LOCALE_CHAN_01_14	(LOCALE_CHAN_01_11 | \
-				 LOCALE_CHAN_12_13 | \
-				 LOCALE_CHAN_14)
-
-#define  LOCALE_RESTRICTED_NONE		  0
-#define  LOCALE_RESTRICTED_SET_2G_SHORT   1
-
 #define LOCALE_2G_IDX_i			0
 #define LOCALE_5G_IDX_11		0
 #define LOCALE_MIMO_IDX_bn		0
@@ -134,10 +100,6 @@ static const struct ieee80211_regdomain brcms_regdom_x2 = {
 struct brcms_cm_band {
 	/* struct locale_info flags */
 	u8 locale_flags;
-	/* List of valid channels in the country */
-	struct brcms_chanvec valid_channels;
-	/* List of restricted use channels */
-	const struct brcms_chanvec *restricted_channels;
 };
 
  /* locale per-channel tx power limits for MIMO frames
@@ -171,211 +133,17 @@ struct brcms_cm_info {
 	const struct brcms_regd *world_regd;
 	/* per-band state (one per phy/radio) */
 	struct brcms_cm_band bandstate[MAXBANDS];
-	/* quiet channels currently for radar sensitivity or 11h support */
-	/* channels on which we cannot transmit */
-	struct brcms_chanvec quiet_channels;
 };
 
 /* locale channel and power info. */
 struct locale_info {
-	u32 valid_channels;
-	/* List of channels used only if APs are detected */
-	u8 restricted_channels;
 	u8 flags;
 };
 
-/* Regulatory Matrix Spreadsheet (CLM) MIMO v3.7.9 */
-
-/*
- * Some common channel sets
- */
-
-/* No channels */
-static const struct brcms_chanvec chanvec_none = {
-	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-/*
- * Restricted channel sets
- */
-
-/* Channels 12, 13 */
-static const struct brcms_chanvec restricted_set_2g_short = {
-	{0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-/* global memory to provide working buffer for expanded locale */
-
-static const struct brcms_chanvec *g_table_restricted_chan[] = {
-	&chanvec_none,		/* restricted_set_none */
-	&restricted_set_2g_short,
-};
-
-static const struct brcms_chanvec locale_2g_01_11 = {
-	{0xfe, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_2g_12_13 = {
-	{0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_2g_14 = {
-	{0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_5g_LOW_JP1 = {
-	{0x00, 0x00, 0x00, 0x00, 0x54, 0x55, 0x01, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_5g_LOW_JP2 = {
-	{0x00, 0x00, 0x00, 0x00, 0x44, 0x44, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_5g_LOW1 = {
-	{0x00, 0x00, 0x00, 0x00, 0x10, 0x11, 0x01, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_5g_LOW2 = {
-	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_5g_LOW3 = {
-	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x11,
-	 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_5g_MID1 = {
-	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x10, 0x11, 0x11, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_5g_MID2 = {
-	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x11,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_5g_MID3 = {
-	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_5g_HIGH1 = {
-	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x10, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_5g_HIGH2 = {
-	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x20, 0x22, 0x02, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_5g_HIGH3 = {
-	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_5g_52_140_ALL = {
-	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x11,
-	 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11,
-	 0x11, 0x11, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_5g_HIGH4 = {
-	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x11,
-	 0x11, 0x11, 0x11, 0x11}
-};
-
-static const struct brcms_chanvec *g_table_locale_base[] = {
-	&locale_2g_01_11,
-	&locale_2g_12_13,
-	&locale_2g_14,
-	&locale_5g_LOW_JP1,
-	&locale_5g_LOW_JP2,
-	&locale_5g_LOW1,
-	&locale_5g_LOW2,
-	&locale_5g_LOW3,
-	&locale_5g_MID1,
-	&locale_5g_MID2,
-	&locale_5g_MID3,
-	&locale_5g_HIGH1,
-	&locale_5g_HIGH2,
-	&locale_5g_HIGH3,
-	&locale_5g_52_140_ALL,
-	&locale_5g_HIGH4
-};
-
-static void brcms_c_locale_add_channels(struct brcms_chanvec *target,
-				    const struct brcms_chanvec *channels)
-{
-	u8 i;
-	for (i = 0; i < sizeof(struct brcms_chanvec); i++)
-		target->vec[i] |= channels->vec[i];
-}
-
-static void brcms_c_locale_get_channels(const struct locale_info *locale,
-				    struct brcms_chanvec *channels)
-{
-	u8 i;
-
-	memset(channels, 0, sizeof(struct brcms_chanvec));
-
-	for (i = 0; i < ARRAY_SIZE(g_table_locale_base); i++) {
-		if (locale->valid_channels & (1 << i))
-			brcms_c_locale_add_channels(channels,
-						g_table_locale_base[i]);
-	}
-}
-
 /*
  * Locale Definitions - 2.4 GHz
  */
 static const struct locale_info locale_i = {	/* locale i. channel 1 - 13 */
-	LOCALE_CHAN_01_11 | LOCALE_CHAN_12_13,
-	LOCALE_RESTRICTED_SET_2G_SHORT,
 	BRCMS_EIRP
 };
 
@@ -383,9 +151,6 @@ static const struct locale_info locale_i = {	/* locale i. channel 1 - 13 */
  * Locale Definitions - 5 GHz
  */
 static const struct locale_info locale_11 = {
-	/* locale 11. channel 36 - 48, 52 - 64, 100 - 140, 149 - 165 */
-	LOCALE_CHAN_36_64 | LOCALE_CHAN_100_140 | LOCALE_CHAN_149_165,
-	LOCALE_RESTRICTED_NONE,
 	BRCMS_EIRP | BRCMS_DFS_EU
 };
 
@@ -521,62 +286,6 @@ static const struct brcms_regd *brcms_default_world_regd(void)
 	return &cntry_locales[0];
 }
 
-/*
- * reset the quiet channels vector to the union
- * of the restricted and radar channel sets
- */
-static void brcms_c_quiet_channels_reset(struct brcms_cm_info *wlc_cm)
-{
-	struct brcms_c_info *wlc = wlc_cm->wlc;
-	uint i, j;
-	struct brcms_band *band;
-	const struct brcms_chanvec *chanvec;
-
-	memset(&wlc_cm->quiet_channels, 0, sizeof(struct brcms_chanvec));
-
-	band = wlc->band;
-	for (i = 0; i < wlc->pub->_nbands;
-	     i++, band = wlc->bandstate[OTHERBANDUNIT(wlc)]) {
-
-		/* initialize quiet channels for restricted channels */
-		chanvec = wlc_cm->bandstate[band->bandunit].restricted_channels;
-		for (j = 0; j < sizeof(struct brcms_chanvec); j++)
-			wlc_cm->quiet_channels.vec[j] |= chanvec->vec[j];
-
-	}
-}
-
-/* Is the channel valid for the current locale and current band? */
-static bool brcms_c_valid_channel20(struct brcms_cm_info *wlc_cm, uint val)
-{
-	struct brcms_c_info *wlc = wlc_cm->wlc;
-
-	return ((val < MAXCHANNEL) &&
-		isset(wlc_cm->bandstate[wlc->band->bandunit].valid_channels.vec,
-		      val));
-}
-
-/* Is the channel valid for the current locale and specified band? */
-static bool brcms_c_valid_channel20_in_band(struct brcms_cm_info *wlc_cm,
-					    uint bandunit, uint val)
-{
-	return ((val < MAXCHANNEL)
-		&& isset(wlc_cm->bandstate[bandunit].valid_channels.vec, val));
-}
-
-/* Is the channel valid for the current locale? (but don't consider channels not
- *   available due to bandlocking)
- */
-static bool brcms_c_valid_channel20_db(struct brcms_cm_info *wlc_cm, uint val)
-{
-	struct brcms_c_info *wlc = wlc_cm->wlc;
-
-	return brcms_c_valid_channel20(wlc->cmi, val) ||
-		(!wlc->bandlocked
-		 && brcms_c_valid_channel20_in_band(wlc->cmi,
-						    OTHERBANDUNIT(wlc), val));
-}
-
 /* JP, J1 - J10 are Japan ccodes */
 static bool brcms_c_japan_ccode(const char *ccode)
 {
@@ -664,10 +373,9 @@ brcms_c_channels_init(struct brcms_cm_info *wlc_cm,
 		      const struct country_info *country)
 {
 	struct brcms_c_info *wlc = wlc_cm->wlc;
-	uint i, j;
+	uint i;
 	struct brcms_band *band;
 	const struct locale_info *li;
-	struct brcms_chanvec sup_chan;
 	const struct locale_mimo_info *li_mimo;
 
 	band = wlc->band;
@@ -685,26 +393,8 @@ brcms_c_channels_init(struct brcms_cm_info *wlc_cm,
 		/* merge the mimo non-mimo locale flags */
 		wlc_cm->bandstate[band->bandunit].locale_flags |=
 		    li_mimo->flags;
-
-		wlc_cm->bandstate[band->bandunit].restricted_channels =
-		    g_table_restricted_chan[li->restricted_channels];
-
-		/*
-		 * set the channel availability, masking out the channels
-		 * that may not be supported on this phy.
-		 */
-		wlc_phy_chanspec_band_validch(band->pi, band->bandtype,
-					      &sup_chan);
-		brcms_c_locale_get_channels(li,
-					&wlc_cm->bandstate[band->bandunit].
-					valid_channels);
-		for (j = 0; j < sizeof(struct brcms_chanvec); j++)
-			wlc_cm->bandstate[band->bandunit].valid_channels.
-			    vec[j] &= sup_chan.vec[j];
 	}
 
-	brcms_c_quiet_channels_reset(wlc_cm);
-
 	return 0;
 }
 
@@ -794,23 +484,12 @@ brcms_c_channel_locale_flags_in_band(struct brcms_cm_info *wlc_cm,
 	return wlc_cm->bandstate[bandunit].locale_flags;
 }
 
-static bool
-brcms_c_quiet_chanspec(struct brcms_cm_info *wlc_cm, u16 chspec)
-{
-	return (wlc_cm->wlc->pub->_n_enab & SUPPORT_11N) &&
-		CHSPEC_IS40(chspec) ?
-		(isset(wlc_cm->quiet_channels.vec,
-		       lower_20_sb(CHSPEC_CHANNEL(chspec))) ||
-		 isset(wlc_cm->quiet_channels.vec,
-		       upper_20_sb(CHSPEC_CHANNEL(chspec)))) :
-		isset(wlc_cm->quiet_channels.vec, CHSPEC_CHANNEL(chspec));
-}
-
 void
 brcms_c_channel_set_chanspec(struct brcms_cm_info *wlc_cm, u16 chanspec,
 			 u8 local_constraint_qdbm)
 {
 	struct brcms_c_info *wlc = wlc_cm->wlc;
+	struct ieee80211_channel *ch = wlc->pub->ieee_hw->conf.channel;
 	struct txpwr_limits txpwr;
 
 	brcms_c_channel_reg_limits(wlc_cm, chanspec, &txpwr);
@@ -820,7 +499,7 @@ brcms_c_channel_set_chanspec(struct brcms_cm_info *wlc_cm, u16 chanspec,
 	);
 
 	brcms_b_set_chanspec(wlc->hw, chanspec,
-			      (brcms_c_quiet_chanspec(wlc_cm, chanspec) != 0),
+			      !!(ch->flags & IEEE80211_CHAN_PASSIVE_SCAN),
 			      &txpwr);
 }
 
@@ -1036,8 +715,7 @@ static bool brcms_c_chspec_malformed(u16 chanspec)
  * and they are also a legal HT combination
  */
 static bool
-brcms_c_valid_chanspec_ext(struct brcms_cm_info *wlc_cm, u16 chspec,
-			   bool dualband)
+brcms_c_valid_chanspec_ext(struct brcms_cm_info *wlc_cm, u16 chspec)
 {
 	struct brcms_c_info *wlc = wlc_cm->wlc;
 	u8 channel = CHSPEC_CHANNEL(chspec);
@@ -1053,22 +731,12 @@ brcms_c_valid_chanspec_ext(struct brcms_cm_info *wlc_cm, u16 chspec,
 	    chspec_bandunit(chspec))
 		return false;
 
-	/* Check a 20Mhz channel */
-	if (CHSPEC_IS20(chspec)) {
-		if (dualband)
-			return brcms_c_valid_channel20_db(wlc_cm->wlc->cmi,
-							  channel);
-		else
-			return brcms_c_valid_channel20(wlc_cm->wlc->cmi,
-						       channel);
-	}
-
-	return false;
+	return true;
 }
 
 bool brcms_c_valid_chanspec_db(struct brcms_cm_info *wlc_cm, u16 chspec)
 {
-	return brcms_c_valid_chanspec_ext(wlc_cm, chspec, true);
+	return brcms_c_valid_chanspec_ext(wlc_cm, chspec);
 }
 
 static bool brcms_is_radar_freq(u16 center_freq)
-- 
cgit v1.1


From edc7651f3a4ffa7fca37d92401562694121512ad Mon Sep 17 00:00:00 2001
From: Seth Forshee <seth.forshee@canonical.com>
Date: Sat, 16 Jun 2012 07:47:56 -0500
Subject: brcm80211: smac: use current regulatory domain when checking whether
 OFDM is allowed

The brcmsmac internal regulatory data is being used to determine whether
OFDM should be allowed, and this is only done once during
initialization. To be effective this needs to be checked against
mac80211's regulatory rules for the current channel.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmsmac/channel.c | 132 +++-------------------
 drivers/net/wireless/brcm80211/brcmsmac/channel.h |   3 -
 drivers/net/wireless/brcm80211/brcmsmac/main.c    |   6 +-
 3 files changed, 15 insertions(+), 126 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
index 04e6a6e..d3c7260 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
@@ -30,13 +30,9 @@
 /* QDB() macro takes a dB value and converts to a quarter dB value */
 #define QDB(n) ((n) * BRCMS_TXPWR_DB_FACTOR)
 
-#define LOCALE_2G_IDX_i			0
-#define LOCALE_5G_IDX_11		0
 #define LOCALE_MIMO_IDX_bn		0
 #define LOCALE_MIMO_IDX_11n		0
 
-/* max of BAND_5G_PWR_LVLS and 6 for 2.4 GHz */
-#define BRCMS_MAXPWR_TBL_SIZE		6
 /* max of BAND_5G_PWR_LVLS and 14 for 2.4 GHz */
 #define BRCMS_MAXPWR_MIMO_TBL_SIZE	14
 
@@ -51,12 +47,8 @@
 
 #define LC(id)	LOCALE_MIMO_IDX_ ## id
 
-#define LC_2G(id)	LOCALE_2G_IDX_ ## id
-
-#define LC_5G(id)	LOCALE_5G_IDX_ ## id
-
-#define LOCALES(band2, band5, mimo2, mimo5) \
-		{LC_2G(band2), LC_5G(band5), LC(mimo2), LC(mimo5)}
+#define LOCALES(mimo2, mimo5) \
+		{LC(mimo2), LC(mimo5)}
 
 /* macro to get 5 GHz channel group index for tx power */
 #define CHANNEL_POWER_IDX_5G(c) (((c) < 52) ? 0 : \
@@ -97,11 +89,6 @@ static const struct ieee80211_regdomain brcms_regdom_x2 = {
 	}
 };
 
-struct brcms_cm_band {
-	/* struct locale_info flags */
-	u8 locale_flags;
-};
-
  /* locale per-channel tx power limits for MIMO frames
   * maxpwr arrays are index by channel for 2.4 GHz limits, and
   * by sub-band for 5 GHz limits using CHANNEL_POWER_IDX_5G(channel)
@@ -111,13 +98,10 @@ struct locale_mimo_info {
 	s8 maxpwr20[BRCMS_MAXPWR_MIMO_TBL_SIZE];
 	/* tx 40 MHz power limits, qdBm units */
 	s8 maxpwr40[BRCMS_MAXPWR_MIMO_TBL_SIZE];
-	u8 flags;
 };
 
 /* Country names and abbreviations with locale defined from ISO 3166 */
 struct country_info {
-	const u8 locale_2G;	/* 2.4G band locale */
-	const u8 locale_5G;	/* 5G band locale */
 	const u8 locale_mimo_2G;	/* 2.4G mimo info */
 	const u8 locale_mimo_5G;	/* 5G mimo info */
 };
@@ -131,35 +115,6 @@ struct brcms_cm_info {
 	struct brcms_pub *pub;
 	struct brcms_c_info *wlc;
 	const struct brcms_regd *world_regd;
-	/* per-band state (one per phy/radio) */
-	struct brcms_cm_band bandstate[MAXBANDS];
-};
-
-/* locale channel and power info. */
-struct locale_info {
-	u8 flags;
-};
-
-/*
- * Locale Definitions - 2.4 GHz
- */
-static const struct locale_info locale_i = {	/* locale i. channel 1 - 13 */
-	BRCMS_EIRP
-};
-
-/*
- * Locale Definitions - 5 GHz
- */
-static const struct locale_info locale_11 = {
-	BRCMS_EIRP | BRCMS_DFS_EU
-};
-
-static const struct locale_info *g_locale_2g_table[] = {
-	&locale_i
-};
-
-static const struct locale_info *g_locale_5g_table[] = {
-	&locale_11
 };
 
 /*
@@ -172,7 +127,6 @@ static const struct locale_mimo_info locale_bn = {
 	{0, 0, QDB(13), QDB(13), QDB(13),
 	 QDB(13), QDB(13), QDB(13), QDB(13), QDB(13),
 	 QDB(13), 0, 0},
-	0
 };
 
 static const struct locale_mimo_info *g_mimo_2g_table[] = {
@@ -185,7 +139,6 @@ static const struct locale_mimo_info *g_mimo_2g_table[] = {
 static const struct locale_mimo_info locale_11n = {
 	{ /* 12.5 dBm */ 50, 50, 50, QDB(15), QDB(15)},
 	{QDB(14), QDB(15), QDB(15), QDB(15), QDB(15)},
-	0
 };
 
 static const struct locale_mimo_info *g_mimo_5g_table[] = {
@@ -195,27 +148,11 @@ static const struct locale_mimo_info *g_mimo_5g_table[] = {
 static const struct brcms_regd cntry_locales[] = {
 	/* Worldwide RoW 2, must always be at index 0 */
 	{
-		.country = LOCALES(i, 11, bn, 11n),
+		.country = LOCALES(bn, 11n),
 		.regdomain = &brcms_regdom_x2,
 	},
 };
 
-static const struct locale_info *brcms_c_get_locale_2g(u8 locale_idx)
-{
-	if (locale_idx >= ARRAY_SIZE(g_locale_2g_table))
-		return NULL; /* error condition */
-
-	return g_locale_2g_table[locale_idx];
-}
-
-static const struct locale_info *brcms_c_get_locale_5g(u8 locale_idx)
-{
-	if (locale_idx >= ARRAY_SIZE(g_locale_5g_table))
-		return NULL; /* error condition */
-
-	return g_locale_5g_table[locale_idx];
-}
-
 static const struct locale_mimo_info *brcms_c_get_mimo_2g(u8 locale_idx)
 {
 	if (locale_idx >= ARRAY_SIZE(g_mimo_2g_table))
@@ -368,36 +305,6 @@ brcms_c_channel_min_txpower_limits_with_local_constraint(
 
 }
 
-static int
-brcms_c_channels_init(struct brcms_cm_info *wlc_cm,
-		      const struct country_info *country)
-{
-	struct brcms_c_info *wlc = wlc_cm->wlc;
-	uint i;
-	struct brcms_band *band;
-	const struct locale_info *li;
-	const struct locale_mimo_info *li_mimo;
-
-	band = wlc->band;
-	for (i = 0; i < wlc->pub->_nbands;
-	     i++, band = wlc->bandstate[OTHERBANDUNIT(wlc)]) {
-
-		li = (band->bandtype == BRCM_BAND_5G) ?
-		    brcms_c_get_locale_5g(country->locale_5G) :
-		    brcms_c_get_locale_2g(country->locale_2G);
-		wlc_cm->bandstate[band->bandunit].locale_flags = li->flags;
-		li_mimo = (band->bandtype == BRCM_BAND_5G) ?
-		    brcms_c_get_mimo_5g(country->locale_mimo_5G) :
-		    brcms_c_get_mimo_2g(country->locale_mimo_2G);
-
-		/* merge the mimo non-mimo locale flags */
-		wlc_cm->bandstate[band->bandunit].locale_flags |=
-		    li_mimo->flags;
-	}
-
-	return 0;
-}
-
 /*
  * set the driver's current country and regulatory information
  * using a country code as the source. Look up built in country
@@ -407,8 +314,6 @@ static void
 brcms_c_set_country(struct brcms_cm_info *wlc_cm,
 		    const struct brcms_regd *regd)
 {
-	const struct country_info *country = &regd->country;
-	const struct locale_info *locale;
 	struct brcms_c_info *wlc = wlc_cm->wlc;
 
 	if ((wlc->pub->_n_enab & SUPPORT_11N) !=
@@ -417,14 +322,8 @@ brcms_c_set_country(struct brcms_cm_info *wlc_cm,
 
 	brcms_c_stf_ss_update(wlc, wlc->bandstate[BAND_2G_INDEX]);
 	brcms_c_stf_ss_update(wlc, wlc->bandstate[BAND_5G_INDEX]);
-	/* set or restore gmode as required by regulatory */
-	locale = brcms_c_get_locale_2g(country->locale_2G);
-	if (locale && (locale->flags & BRCMS_NO_OFDM))
-		brcms_c_set_gmode(wlc, GMODE_LEGACY_B, false);
-	else
-		brcms_c_set_gmode(wlc, wlc->protection->gmode_user, false);
 
-	brcms_c_channels_init(wlc_cm, country);
+	brcms_c_set_gmode(wlc, wlc->protection->gmode_user, false);
 
 	return;
 }
@@ -477,20 +376,15 @@ void brcms_c_channel_mgr_detach(struct brcms_cm_info *wlc_cm)
 	kfree(wlc_cm);
 }
 
-u8
-brcms_c_channel_locale_flags_in_band(struct brcms_cm_info *wlc_cm,
-				     uint bandunit)
-{
-	return wlc_cm->bandstate[bandunit].locale_flags;
-}
-
 void
 brcms_c_channel_set_chanspec(struct brcms_cm_info *wlc_cm, u16 chanspec,
 			 u8 local_constraint_qdbm)
 {
 	struct brcms_c_info *wlc = wlc_cm->wlc;
 	struct ieee80211_channel *ch = wlc->pub->ieee_hw->conf.channel;
+	const struct ieee80211_reg_rule *reg_rule;
 	struct txpwr_limits txpwr;
+	int ret;
 
 	brcms_c_channel_reg_limits(wlc_cm, chanspec, &txpwr);
 
@@ -498,6 +392,13 @@ brcms_c_channel_set_chanspec(struct brcms_cm_info *wlc_cm, u16 chanspec,
 		wlc_cm, &txpwr, local_constraint_qdbm
 	);
 
+	/* set or restore gmode as required by regulatory */
+	ret = freq_reg_info(wlc->wiphy, ch->center_freq, 0, &reg_rule);
+	if (!ret && (reg_rule->flags & NL80211_RRF_NO_OFDM))
+		brcms_c_set_gmode(wlc, GMODE_LEGACY_B, false);
+	else
+		brcms_c_set_gmode(wlc, wlc->protection->gmode_user, false);
+
 	brcms_b_set_chanspec(wlc->hw, chanspec,
 			      !!(ch->flags & IEEE80211_CHAN_PASSIVE_SCAN),
 			      &txpwr);
@@ -515,7 +416,6 @@ brcms_c_channel_reg_limits(struct brcms_cm_info *wlc_cm, u16 chanspec,
 	int delta;
 	const struct country_info *country;
 	struct brcms_band *band;
-	const struct locale_info *li;
 	int conducted_max = BRCMS_TXPWR_MAX;
 	const struct locale_mimo_info *li_mimo;
 	int maxpwr20, maxpwr40;
@@ -531,17 +431,13 @@ brcms_c_channel_reg_limits(struct brcms_cm_info *wlc_cm, u16 chanspec,
 
 	chan = CHSPEC_CHANNEL(chanspec);
 	band = wlc->bandstate[chspec_bandunit(chanspec)];
-	li = (band->bandtype == BRCM_BAND_5G) ?
-	    brcms_c_get_locale_5g(country->locale_5G) :
-	    brcms_c_get_locale_2g(country->locale_2G);
-
 	li_mimo = (band->bandtype == BRCM_BAND_5G) ?
 	    brcms_c_get_mimo_5g(country->locale_mimo_5G) :
 	    brcms_c_get_mimo_2g(country->locale_mimo_2G);
 
 	delta = band->antgain;
 
-	if (li == &locale_i)
+	if (band->bandtype == BRCM_BAND_2G)
 		conducted_max = QDB(22);
 
 	maxpwr = QDB(ch->max_power) - delta;
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.h b/drivers/net/wireless/brcm80211/brcmsmac/channel.h
index de9887d95..006483a 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/channel.h
+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.h
@@ -37,9 +37,6 @@ brcms_c_channel_mgr_attach(struct brcms_c_info *wlc);
 
 extern void brcms_c_channel_mgr_detach(struct brcms_cm_info *wlc_cm);
 
-extern u8 brcms_c_channel_locale_flags_in_band(struct brcms_cm_info *wlc_cm,
-					   uint bandunit);
-
 extern bool brcms_c_valid_chanspec_db(struct brcms_cm_info *wlc_cm,
 				      u16 chspec);
 
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c
index 93c865d..8776fbc 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -18,6 +18,7 @@
 
 #include <linux/pci_ids.h>
 #include <linux/if_ether.h>
+#include <net/cfg80211.h>
 #include <net/mac80211.h>
 #include <brcm_hw_ids.h>
 #include <aiutils.h>
@@ -5386,11 +5387,6 @@ int brcms_c_set_gmode(struct brcms_c_info *wlc, u8 gmode, bool config)
 	else
 		return -EINVAL;
 
-	/* Legacy or bust when no OFDM is supported by regulatory */
-	if ((brcms_c_channel_locale_flags_in_band(wlc->cmi, band->bandunit) &
-	     BRCMS_NO_OFDM) && (gmode != GMODE_LEGACY_B))
-		return -EINVAL;
-
 	/* update configuration value */
 	if (config)
 		brcms_c_protection_upd(wlc, BRCMS_PROT_G_USER, gmode);
-- 
cgit v1.1


From 7e05bedca084faa073c2e64bbcd6407dbaff3151 Mon Sep 17 00:00:00 2001
From: Grazvydas Ignotas <notasas@gmail.com>
Date: Sat, 16 Jun 2012 22:31:48 +0300
Subject: wl1251: remove unused filter_work

filter_work is never used, remove it.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ti/wl1251/main.c   | 36 ---------------------------------
 drivers/net/wireless/ti/wl1251/wl1251.h |  1 -
 2 files changed, 37 deletions(-)

diff --git a/drivers/net/wireless/ti/wl1251/main.c b/drivers/net/wireless/ti/wl1251/main.c
index d1afb8e..ff60a7a 100644
--- a/drivers/net/wireless/ti/wl1251/main.c
+++ b/drivers/net/wireless/ti/wl1251/main.c
@@ -348,33 +348,6 @@ out:
 	return ret;
 }
 
-static void wl1251_filter_work(struct work_struct *work)
-{
-	struct wl1251 *wl =
-		container_of(work, struct wl1251, filter_work);
-	int ret;
-
-	mutex_lock(&wl->mutex);
-
-	if (wl->state == WL1251_STATE_OFF)
-		goto out;
-
-	ret = wl1251_ps_elp_wakeup(wl);
-	if (ret < 0)
-		goto out;
-
-	ret = wl1251_join(wl, wl->bss_type, wl->channel, wl->beacon_int,
-			  wl->dtim_period);
-	if (ret < 0)
-		goto out_sleep;
-
-out_sleep:
-	wl1251_ps_elp_sleep(wl);
-
-out:
-	mutex_unlock(&wl->mutex);
-}
-
 static void wl1251_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 {
 	struct wl1251 *wl = hw->priv;
@@ -478,7 +451,6 @@ static void wl1251_op_stop(struct ieee80211_hw *hw)
 
 	cancel_work_sync(&wl->irq_work);
 	cancel_work_sync(&wl->tx_work);
-	cancel_work_sync(&wl->filter_work);
 	cancel_delayed_work_sync(&wl->elp_work);
 
 	mutex_lock(&wl->mutex);
@@ -723,13 +695,6 @@ static void wl1251_op_configure_filter(struct ieee80211_hw *hw,
 		wl->rx_filter |= CFG_RX_CTL_EN;
 	if (*total & FIF_OTHER_BSS)
 		wl->rx_filter &= ~CFG_BSSID_FILTER_EN;
-
-	/*
-	 * FIXME: workqueues need to be properly cancelled on stop(), for
-	 * now let's just disable changing the filter settings. They will
-	 * be updated any on config().
-	 */
-	/* schedule_work(&wl->filter_work); */
 }
 
 /* HW encryption */
@@ -1390,7 +1355,6 @@ struct ieee80211_hw *wl1251_alloc_hw(void)
 
 	skb_queue_head_init(&wl->tx_queue);
 
-	INIT_WORK(&wl->filter_work, wl1251_filter_work);
 	INIT_DELAYED_WORK(&wl->elp_work, wl1251_elp_work);
 	wl->channel = WL1251_DEFAULT_CHANNEL;
 	wl->scanning = false;
diff --git a/drivers/net/wireless/ti/wl1251/wl1251.h b/drivers/net/wireless/ti/wl1251/wl1251.h
index 9d8f581..fd02060 100644
--- a/drivers/net/wireless/ti/wl1251/wl1251.h
+++ b/drivers/net/wireless/ti/wl1251/wl1251.h
@@ -315,7 +315,6 @@ struct wl1251 {
 	bool tx_queue_stopped;
 
 	struct work_struct tx_work;
-	struct work_struct filter_work;
 
 	/* Pending TX frames */
 	struct sk_buff *tx_frames[16];
-- 
cgit v1.1


From a2d2bb8675fe9dc127d802b6be6517a0932e65b7 Mon Sep 17 00:00:00 2001
From: Grazvydas Ignotas <notasas@gmail.com>
Date: Sat, 16 Jun 2012 22:31:49 +0300
Subject: wl1251: fix filtering support

This driver has a hack in cmd.c which effectively disables all filtering.
This seems to be triggering a firmware bug where it stops reporting any
rx packets after random time on some routers, which is eliminated (or at
least appears much more rarely) when filtering is on.
I have found that only BSSID filter needs to be disabled for association
to work, so disable only that instead of all filtering.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ti/wl1251/cmd.c  | 9 ---------
 drivers/net/wireless/ti/wl1251/main.c | 6 ++++++
 2 files changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/ti/wl1251/cmd.c b/drivers/net/wireless/ti/wl1251/cmd.c
index d14d69d..6822b84 100644
--- a/drivers/net/wireless/ti/wl1251/cmd.c
+++ b/drivers/net/wireless/ti/wl1251/cmd.c
@@ -277,15 +277,6 @@ int wl1251_cmd_join(struct wl1251 *wl, u8 bss_type, u8 channel,
 	join->rx_config_options = wl->rx_config;
 	join->rx_filter_options = wl->rx_filter;
 
-	/*
-	 * FIXME: disable temporarily all filters because after commit
-	 * 9cef8737 "mac80211: fix managed mode BSSID handling" broke
-	 * association. The filter logic needs to be implemented properly
-	 * and once that is done, this hack can be removed.
-	 */
-	join->rx_config_options = 0;
-	join->rx_filter_options = WL1251_DEFAULT_RX_FILTER;
-
 	join->basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS |
 		RATE_MASK_5_5MBPS | RATE_MASK_11MBPS;
 
diff --git a/drivers/net/wireless/ti/wl1251/main.c b/drivers/net/wireless/ti/wl1251/main.c
index ff60a7a..6094e3f 100644
--- a/drivers/net/wireless/ti/wl1251/main.c
+++ b/drivers/net/wireless/ti/wl1251/main.c
@@ -334,6 +334,12 @@ static int wl1251_join(struct wl1251 *wl, u8 bss_type, u8 channel,
 	if (ret < 0)
 		goto out;
 
+	/*
+	 * Join command applies filters, and if we are not associated,
+	 * BSSID filter must be disabled for association to work.
+	 */
+	if (is_zero_ether_addr(wl->bssid))
+		wl->rx_config &= ~CFG_BSSID_FILTER_EN;
 
 	ret = wl1251_cmd_join(wl, bss_type, channel, beacon_interval,
 			      dtim_period);
-- 
cgit v1.1


From 84b60c144cd32db5ca5185405e9b3f84cac9df9a Mon Sep 17 00:00:00 2001
From: Grazvydas Ignotas <notasas@gmail.com>
Date: Sat, 16 Jun 2012 22:31:50 +0300
Subject: wl1251: send filters to firmware as they are set

Firmware supports changing filters using ACX_RX_CFG command,
so use it in .configure_filter callback. Firmware also supports
probe request filtering, so add it too along the way.
This will also re-enable BSSID filter which is now removed by
join command while associating.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ti/wl1251/main.c | 27 +++++++++++++++++++++++----
 1 file changed, 23 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ti/wl1251/main.c b/drivers/net/wireless/ti/wl1251/main.c
index 6094e3f..3118c42 100644
--- a/drivers/net/wireless/ti/wl1251/main.c
+++ b/drivers/net/wireless/ti/wl1251/main.c
@@ -659,13 +659,15 @@ out:
 				  FIF_FCSFAIL | \
 				  FIF_BCN_PRBRESP_PROMISC | \
 				  FIF_CONTROL | \
-				  FIF_OTHER_BSS)
+				  FIF_OTHER_BSS | \
+				  FIF_PROBE_REQ)
 
 static void wl1251_op_configure_filter(struct ieee80211_hw *hw,
 				       unsigned int changed,
 				       unsigned int *total,u64 multicast)
 {
 	struct wl1251 *wl = hw->priv;
+	int ret;
 
 	wl1251_debug(DEBUG_MAC80211, "mac80211 configure filter");
 
@@ -676,7 +678,7 @@ static void wl1251_op_configure_filter(struct ieee80211_hw *hw,
 		/* no filters which we support changed */
 		return;
 
-	/* FIXME: wl->rx_config and wl->rx_filter are not protected */
+	mutex_lock(&wl->mutex);
 
 	wl->rx_config = WL1251_DEFAULT_RX_CONFIG;
 	wl->rx_filter = WL1251_DEFAULT_RX_FILTER;
@@ -699,8 +701,25 @@ static void wl1251_op_configure_filter(struct ieee80211_hw *hw,
 	}
 	if (*total & FIF_CONTROL)
 		wl->rx_filter |= CFG_RX_CTL_EN;
-	if (*total & FIF_OTHER_BSS)
-		wl->rx_filter &= ~CFG_BSSID_FILTER_EN;
+	if (*total & FIF_OTHER_BSS || is_zero_ether_addr(wl->bssid))
+		wl->rx_config &= ~CFG_BSSID_FILTER_EN;
+	if (*total & FIF_PROBE_REQ)
+		wl->rx_filter |= CFG_RX_PREQ_EN;
+
+	if (wl->state == WL1251_STATE_OFF)
+		goto out;
+
+	ret = wl1251_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto out;
+
+	/* send filters to firmware */
+	wl1251_acx_rx_config(wl, wl->rx_config, wl->rx_filter);
+
+	wl1251_ps_elp_sleep(wl);
+
+out:
+	mutex_unlock(&wl->mutex);
 }
 
 /* HW encryption */
-- 
cgit v1.1


From 305dd09f8ce05cc8a8cce4e790a6d3d02e5c4f1d Mon Sep 17 00:00:00 2001
From: Bala Shanmugam <bkamatch@qca.qualcomm.com>
Date: Mon, 18 Jun 2012 11:36:58 +0530
Subject: ath9k: fix incorrect profile type manupulation

Two MCI interrupts are generated while adding A2DP and headset profiles
with different types and same connection handle. While disconnecting,
only one MCI interrupt is generated with last added profile type value
for both profiles.

While adding second profile type decrement first one.

Signed-off-by: Bala Shanmugam <bkamatch@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/mci.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/mci.c b/drivers/net/wireless/ath/ath9k/mci.c
index 7d34a50..c40e568 100644
--- a/drivers/net/wireless/ath/ath9k/mci.c
+++ b/drivers/net/wireless/ath/ath9k/mci.c
@@ -233,8 +233,21 @@ static void ath_mci_process_profile(struct ath_softc *sc,
 	struct ath_mci_profile_info *entry = NULL;
 
 	entry = ath_mci_find_profile(mci, info);
-	if (entry)
+	if (entry) {
+		/*
+		 * Two MCI interrupts are generated while connecting to
+		 * headset and A2DP profile, but only one MCI interrupt
+		 * is generated with last added profile type while disconnecting
+		 * both profiles.
+		 * So while adding second profile type decrement
+		 * the first one.
+		 */
+		if (entry->type != info->type) {
+			DEC_PROF(mci, entry);
+			INC_PROF(mci, info);
+		}
 		memcpy(entry, info, 10);
+	}
 
 	if (info->start) {
 		if (!entry && !ath_mci_add_profile(common, mci, info))
-- 
cgit v1.1


From a68807e9177a083dc09c24b141158539d71db21c Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Date: Mon, 18 Jun 2012 19:02:37 +0530
Subject: ath9k_hw: fix BT mute at hw init

WLAN driver initialization is muting BT which is terminating
the ongoing BT traffic. The reason to mute BT is to avoid any
incoming MCI messages from BT when MCI reset is in progress that
could corrupt WLAN MCI RX state machine. But we should not
dedicate radio completely to WLAN in driver init itself. So this
patch removes the wlan weightage changes from mute BT to retain
BT connection.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_mci.c | 4 ----
 drivers/net/wireless/ath/ath9k/reg.h        | 4 ----
 2 files changed, 8 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
index cc2853a..867238f 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
@@ -767,10 +767,6 @@ static void ar9003_mci_mute_bt(struct ath_hw *ah)
 {
 	/* disable all MCI messages */
 	REG_WRITE(ah, AR_MCI_MSG_ATTRIBUTES_TABLE, 0xffff0000);
-	REG_WRITE(ah, AR_BTCOEX_WL_WEIGHTS0, 0xffffffff);
-	REG_WRITE(ah, AR_BTCOEX_WL_WEIGHTS1, 0xffffffff);
-	REG_WRITE(ah, AR_BTCOEX_WL_WEIGHTS2, 0xffffffff);
-	REG_WRITE(ah, AR_BTCOEX_WL_WEIGHTS3, 0xffffffff);
 	REG_SET_BIT(ah, AR_MCI_TX_CTRL, AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
 
 	/* wait pending HW messages to flush out */
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index 75acefb..5046b28 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -2162,10 +2162,6 @@ enum {
 #define AR_BTCOEX_CTRL_SPDT_POLARITY			0x80000000
 #define AR_BTCOEX_CTRL_SPDT_POLARITY_S			31
 
-#define AR_BTCOEX_WL_WEIGHTS0				0x18b0
-#define AR_BTCOEX_WL_WEIGHTS1				0x18b4
-#define AR_BTCOEX_WL_WEIGHTS2				0x18b8
-#define AR_BTCOEX_WL_WEIGHTS3				0x18bc
 #define AR_BTCOEX_MAX_TXPWR(_x)				(0x18c0 + ((_x) << 2))
 #define AR_BTCOEX_WL_LNA				0x1940
 #define AR_BTCOEX_RFGAIN_CTRL				0x1944
-- 
cgit v1.1


From e1ecad78e5c5c32f331925f340141a38aaa64cef Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Date: Mon, 18 Jun 2012 19:02:38 +0530
Subject: ath9k: fix mci_is_enabled utility

During driver stop, btcoex is disabled and also btcoex_hw.enabled
is set to false. Afterwards mci_is_enabled returns false so that
BT is not gaining SPDT control on WLAN sleep. Fix that.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/hw.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index b49e4b4..9409660 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -1030,7 +1030,8 @@ static inline bool ath9k_hw_btcoex_is_enabled(struct ath_hw *ah)
 }
 static inline bool ath9k_hw_mci_is_enabled(struct ath_hw *ah)
 {
-	return ah->btcoex_hw.enabled && (ah->caps.hw_caps & ATH9K_HW_CAP_MCI);
+	return ah->common.btcoex_enabled &&
+	       (ah->caps.hw_caps & ATH9K_HW_CAP_MCI);
 
 }
 void ath9k_hw_btcoex_enable(struct ath_hw *ah);
-- 
cgit v1.1


From 0967d862315366e2ef2401301ff2b1756928b4c1 Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Date: Mon, 18 Jun 2012 19:02:39 +0530
Subject: ath9k_hw: update ar9462 dac_async_fifo initval

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h b/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h
index 8f406ff..bbf48918a 100644
--- a/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h
@@ -61,7 +61,7 @@ static const u32 ar9462_2p0_baseband_postamble[][5] = {
 	{0x00009e44, 0x62321e27, 0x62321e27, 0xfe291e27, 0xfe291e27},
 	{0x00009e48, 0x5030201a, 0x5030201a, 0x50302012, 0x50302012},
 	{0x00009fc8, 0x0003f000, 0x0003f000, 0x0001a000, 0x0001a000},
-	{0x0000a204, 0x013187c0, 0x013187c4, 0x013187c4, 0x013187c0},
+	{0x0000a204, 0x01318fc0, 0x01318fc4, 0x01318fc4, 0x01318fc0},
 	{0x0000a208, 0x00000104, 0x00000104, 0x00000004, 0x00000004},
 	{0x0000a22c, 0x01026a2f, 0x01026a27, 0x01026a2f, 0x01026a2f},
 	{0x0000a230, 0x0000400a, 0x00004014, 0x00004016, 0x0000400b},
-- 
cgit v1.1


From 4ff6a9d200c66f192da61822c36ad14424e218d6 Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Date: Mon, 18 Jun 2012 19:02:40 +0530
Subject: ath9k_hw: fix LNA control on WLAN sleep

When WLAN enter full sleep mode, WLAN HW should send out a LNA_TAKE
message for BT to take control of the shared LNA. Otherwise BT traffic
is completely stopped whenever the wlan interface is moved full sleep
mode.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_mci.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
index 867238f..6155837 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
@@ -1015,9 +1015,14 @@ void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool force)
 		return;
 
 	if (mci->is_2g) {
-		ar9003_mci_send_2g5g_status(ah, true);
+		if (!force) {
+			ar9003_mci_send_2g5g_status(ah, true);
 
-		REG_SET_BIT(ah, AR_MCI_TX_CTRL,
+			ar9003_mci_send_lna_transfer(ah, true);
+			udelay(5);
+		}
+
+		REG_CLR_BIT(ah, AR_MCI_TX_CTRL,
 			    AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
 		REG_CLR_BIT(ah, AR_PHY_GLB_CONTROL,
 			    AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL);
@@ -1025,6 +1030,11 @@ void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool force)
 		if (!(mci->config & ATH_MCI_CONFIG_DISABLE_OSLA))
 			ar9003_mci_osla_setup(ah, true);
 	} else {
+		if (!force) {
+			ar9003_mci_send_lna_take(ah, true);
+			udelay(5);
+		}
+
 		REG_SET_BIT(ah, AR_MCI_TX_CTRL,
 			    AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
 		REG_SET_BIT(ah, AR_PHY_GLB_CONTROL,
@@ -1251,6 +1261,9 @@ void ar9003_mci_bt_gain_ctrl(struct ath_hw *ah)
 
 	ath_dbg(common, MCI, "Give LNA and SPDT control to BT\n");
 
+	ar9003_mci_send_lna_take(ah, true);
+	udelay(50);
+
 	REG_SET_BIT(ah, AR_PHY_GLB_CONTROL, AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL);
 	mci->is_2g = false;
 	mci->update_2g5g = true;
-- 
cgit v1.1


From 5039f38e16695a0a5c72b08c6a6cc66844a657b1 Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Date: Tue, 19 Jun 2012 14:50:28 +0530
Subject: ath9k: do not sampling on ani timer when chip is in sleep

The baseband and cycle counters are being sampled during ani
processing for debugging purpose. Whenever the ani is postponded
due to sleep state, taking samples on that time is of no use and
also unneccesarily waking up the chip might increase the power
consumption on idle associated state. Hence moving debug function
within powersave block.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/link.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/link.c b/drivers/net/wireless/ath/ath9k/link.c
index a105c94..91650fe 100644
--- a/drivers/net/wireless/ath/ath9k/link.c
+++ b/drivers/net/wireless/ath/ath9k/link.c
@@ -407,6 +407,7 @@ void ath_ani_calibrate(unsigned long data)
 		longcal ? "long" : "", shortcal ? "short" : "",
 		aniflag ? "ani" : "", common->ani.caldone ? "true" : "false");
 
+	ath9k_debug_samp_bb_mac(sc);
 	ath9k_ps_restore(sc);
 
 set_timer:
@@ -415,7 +416,6 @@ set_timer:
 	* The interval must be the shortest necessary to satisfy ANI,
 	* short calibration and long calibration.
 	*/
-	ath9k_debug_samp_bb_mac(sc);
 	cal_interval = ATH_LONG_CALINTERVAL;
 	if (sc->sc_ah->config.enable_ani)
 		cal_interval = min(cal_interval,
-- 
cgit v1.1


From f761b6947dde42890beea59b020e1be87491809e Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Wed, 20 Jun 2012 11:47:26 -0500
Subject: rtlwifi: rtl8192se: Fix gcc 4.7.x warning
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

With gcc 4.7.x, the following warning is issued as the routine that sets
the array has the possibility of not initializing the values:

  CC [M]  drivers/net/wireless/rtlwifi/rtl8192se/phy.o
drivers/net/wireless/rtlwifi/rtl8192se/phy.c: In function ‘rtl92s_phy_set_txpower’:
drivers/net/wireless/rtlwifi/rtl8192se/phy.c:1268:23: warning: ‘ofdmpowerLevel[0]’ may be used uninitialized in this function [-Wuninitialized]

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8192se/phy.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/phy.c b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c
index 8d7099b..b917a2a 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/phy.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c
@@ -1247,6 +1247,9 @@ static void _rtl92s_phy_get_txpower_index(struct ieee80211_hw *hw, u8 channel,
 		/* Read HT 40 OFDM TX power */
 		ofdmpowerLevel[0] = rtlefuse->txpwrlevel_ht40_2s[0][index];
 		ofdmpowerLevel[1] = rtlefuse->txpwrlevel_ht40_2s[1][index];
+	} else {
+		ofdmpowerLevel[0] = 0;
+		ofdmpowerLevel[1] = 0;
 	}
 }
 
-- 
cgit v1.1


From 3f8a9e76672202bfb55cc83b5fdc66306d3d170a Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 20 Jun 2012 21:25:15 +0200
Subject: iwlwifi: fix radio reset scan dwell vs. quiet time

My previous commit to shorten the radio reset time
caused issues as the firmware checks the active
dwell time against the quiet time, asserting that
the dwell is >= quiet time. This isn't really
needed in case of passive scanning like here, but
of course we need to pass that check.

To fix this, override the quiet time to be the
same as the radio reset dwell time.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/dvm/scan.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/wireless/iwlwifi/dvm/scan.c b/drivers/net/wireless/iwlwifi/dvm/scan.c
index f5b1452..6633074 100644
--- a/drivers/net/wireless/iwlwifi/dvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/dvm/scan.c
@@ -720,6 +720,12 @@ static int iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
 	switch (priv->scan_type) {
 	case IWL_SCAN_RADIO_RESET:
 		IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n");
+		/*
+		 * Override quiet time as firmware checks that active
+		 * dwell is >= quiet; since we use passive scan it'll
+		 * not actually be used.
+		 */
+		scan->quiet_time = cpu_to_le16(IWL_RADIO_RESET_DWELL_TIME);
 		break;
 	case IWL_SCAN_NORMAL:
 		if (priv->scan_request->n_ssids) {
-- 
cgit v1.1


From e9c03d18c4291c4351d6b9f74bd1278a761015a2 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 20 Jun 2012 16:24:59 +0200
Subject: iwlwifi: increase scan timeout

When the first interface is active, then scanning
on it or the second interface can take a little
longer than 7s (I observed around 8s.) Bump the
timeout to 15s to avoid aborting a scan that is
still running, just taking more time.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/dvm/agn.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/iwlwifi/dvm/agn.h b/drivers/net/wireless/iwlwifi/dvm/agn.h
index 6d10241..9bb16bd 100644
--- a/drivers/net/wireless/iwlwifi/dvm/agn.h
+++ b/drivers/net/wireless/iwlwifi/dvm/agn.h
@@ -269,7 +269,7 @@ void iwl_scan_offchannel_skb_status(struct iwl_priv *priv);
 #define IWL_ACTIVE_QUIET_TIME       cpu_to_le16(10)  /* msec */
 #define IWL_PLCP_QUIET_THRESH       cpu_to_le16(1)  /* packets */
 
-#define IWL_SCAN_CHECK_WATCHDOG		(HZ * 7)
+#define IWL_SCAN_CHECK_WATCHDOG		(HZ * 15)
 
 
 /* bt coex */
-- 
cgit v1.1


From e75dac921d88ac1fa1ad08686ab242556f8b888b Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 20 Jun 2012 11:47:42 +0200
Subject: iwlwifi: limit mac_change_interface to BSS context

Currently when mac80211 asks to change the interface
type, we will accept it for both the BSS and PAN
contexts. This is not terribly complicated today,
but with the addition of the P2P Device abstraction
the PAN context handling will get more complex, so
restrict mac_change_interface to the BSS context.

Also fix a small locking issue and use is_active
instead of the vif pointer to check if the other
context is activated, guarding exclusive interface
types on the BSS context (IBSS) against the PAN
context being used for something else.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/iwlwifi/dvm/mac80211.c | 37 +++++++++++++----------------
 1 file changed, 17 insertions(+), 20 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c
index b581f03..b83ca35 100644
--- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c
@@ -1411,13 +1411,11 @@ static void iwlagn_mac_remove_interface(struct ieee80211_hw *hw,
 }
 
 static int iwlagn_mac_change_interface(struct ieee80211_hw *hw,
-				struct ieee80211_vif *vif,
-				enum nl80211_iftype newtype, bool newp2p)
+				       struct ieee80211_vif *vif,
+				       enum nl80211_iftype newtype, bool newp2p)
 {
 	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
-	struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
-	struct iwl_rxon_context *bss_ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-	struct iwl_rxon_context *tmp;
+	struct iwl_rxon_context *ctx, *tmp;
 	enum nl80211_iftype newviftype = newtype;
 	u32 interface_modes;
 	int err;
@@ -1428,6 +1426,18 @@ static int iwlagn_mac_change_interface(struct ieee80211_hw *hw,
 
 	mutex_lock(&priv->mutex);
 
+	ctx = iwl_rxon_ctx_from_vif(vif);
+
+	/*
+	 * To simplify this code, only support changes on the
+	 * BSS context. The PAN context is usually reassigned
+	 * by creating/removing P2P interfaces anyway.
+	 */
+	if (ctx->ctxid != IWL_RXON_CTX_BSS) {
+		err = -EBUSY;
+		goto out;
+	}
+
 	if (!ctx->vif || !iwl_is_ready_rf(priv)) {
 		/*
 		 * Huh? But wait ... this can maybe happen when
@@ -1437,32 +1447,19 @@ static int iwlagn_mac_change_interface(struct ieee80211_hw *hw,
 		goto out;
 	}
 
+	/* Check if the switch is supported in the same context */
 	interface_modes = ctx->interface_modes | ctx->exclusive_interface_modes;
-
 	if (!(interface_modes & BIT(newtype))) {
 		err = -EBUSY;
 		goto out;
 	}
 
-	/*
-	 * Refuse a change that should be done by moving from the PAN
-	 * context to the BSS context instead, if the BSS context is
-	 * available and can support the new interface type.
-	 */
-	if (ctx->ctxid == IWL_RXON_CTX_PAN && !bss_ctx->vif &&
-	    (bss_ctx->interface_modes & BIT(newtype) ||
-	     bss_ctx->exclusive_interface_modes & BIT(newtype))) {
-		BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
-		err = -EBUSY;
-		goto out;
-	}
-
 	if (ctx->exclusive_interface_modes & BIT(newtype)) {
 		for_each_context(priv, tmp) {
 			if (ctx == tmp)
 				continue;
 
-			if (!tmp->vif)
+			if (!tmp->is_active)
 				continue;
 
 			/*
-- 
cgit v1.1


From c954910bc4501447cc647d5fca5bd0d9439e177d Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Wed, 6 Jun 2012 10:48:56 +0300
Subject: wlcore: suppress error message on Rx BA session removal

The ampdu_action() function is called on the reconfig() path to remove
existing Rx BA sessions. Since these don't exist for the low level
driver, we output an error message. Turn the message into a debug
message for now, until the mac80211 reconfig flow is changed.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/main.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 8eefcd7..22b342f 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -4366,9 +4366,14 @@ static int wl1271_op_ampdu_action(struct ieee80211_hw *hw,
 
 	case IEEE80211_AMPDU_RX_STOP:
 		if (!(*ba_bitmap & BIT(tid))) {
-			ret = -EINVAL;
-			wl1271_error("no active RX BA session on tid: %d",
+			/*
+			 * this happens on reconfig - so only output a debug
+			 * message for now, and don't fail the function.
+			 */
+			wl1271_debug(DEBUG_MAC80211,
+				     "no active RX BA session on tid: %d",
 				     tid);
+			ret = 0;
 			break;
 		}
 
-- 
cgit v1.1


From 26b5858a67e4316ecd8159e2c0dc5591ef68226a Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Tue, 28 Feb 2012 19:13:28 +0200
Subject: wlcore: add a debugfs entry to allow changing the sleep mode by hand

For FW debugging purposes, we may need to change the sleep mode
(aka. sleep_auth) by hand, and set it to the mode we want.  To allow
this, a debugfs entry is added.

Now we store the sleep_auth value that has been set and use that
instead of the quirk to decide whether we should enter ELP or not.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
---
 drivers/net/wireless/ti/wlcore/acx.c     |  3 ++
 drivers/net/wireless/ti/wlcore/acx.h     |  2 ++
 drivers/net/wireless/ti/wlcore/debugfs.c | 58 ++++++++++++++++++++++++++++++++
 drivers/net/wireless/ti/wlcore/main.c    |  3 ++
 drivers/net/wireless/ti/wlcore/ps.c      |  2 +-
 drivers/net/wireless/ti/wlcore/wlcore.h  |  3 ++
 6 files changed, 70 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ti/wlcore/acx.c b/drivers/net/wireless/ti/wlcore/acx.c
index b9ec42c..b56217f 100644
--- a/drivers/net/wireless/ti/wlcore/acx.c
+++ b/drivers/net/wireless/ti/wlcore/acx.c
@@ -81,7 +81,10 @@ int wl1271_acx_sleep_auth(struct wl1271 *wl, u8 sleep_auth)
 	auth->sleep_auth = sleep_auth;
 
 	ret = wl1271_cmd_configure(wl, ACX_SLEEP_AUTH, auth, sizeof(*auth));
+	if (ret < 0)
+		goto out;
 
+	wl->sleep_auth = sleep_auth;
 out:
 	kfree(auth);
 	return ret;
diff --git a/drivers/net/wireless/ti/wlcore/acx.h b/drivers/net/wireless/ti/wlcore/acx.h
index c018125..168e0464 100644
--- a/drivers/net/wireless/ti/wlcore/acx.h
+++ b/drivers/net/wireless/ti/wlcore/acx.h
@@ -118,6 +118,8 @@ enum wl1271_psm_mode {
 
 	/* Extreme low power */
 	WL1271_PSM_ELP = 2,
+
+	WL1271_PSM_MAX = WL1271_PSM_ELP,
 };
 
 struct acx_sleep_auth {
diff --git a/drivers/net/wireless/ti/wlcore/debugfs.c b/drivers/net/wireless/ti/wlcore/debugfs.c
index 689a847..91e43def0 100644
--- a/drivers/net/wireless/ti/wlcore/debugfs.c
+++ b/drivers/net/wireless/ti/wlcore/debugfs.c
@@ -963,6 +963,63 @@ static const struct file_operations fw_stats_raw_ops = {
 	.llseek = default_llseek,
 };
 
+static ssize_t sleep_auth_read(struct file *file, char __user *user_buf,
+			       size_t count, loff_t *ppos)
+{
+	struct wl1271 *wl = file->private_data;
+
+	return wl1271_format_buffer(user_buf, count,
+				    ppos, "%d\n",
+				    wl->sleep_auth);
+}
+
+static ssize_t sleep_auth_write(struct file *file,
+				const char __user *user_buf,
+				size_t count, loff_t *ppos)
+{
+	struct wl1271 *wl = file->private_data;
+	unsigned long value;
+	int ret;
+
+	ret = kstrtoul_from_user(user_buf, count, 0, &value);
+	if (ret < 0) {
+		wl1271_warning("illegal value in sleep_auth");
+		return -EINVAL;
+	}
+
+	if (value < 0 || value > WL1271_PSM_MAX) {
+		wl1271_warning("sleep_auth must be between 0 and %d",
+			       WL1271_PSM_MAX);
+		return -ERANGE;
+	}
+
+	mutex_lock(&wl->mutex);
+
+	if (wl->state == WL1271_STATE_OFF)
+		goto out;
+
+	ret = wl1271_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto out;
+
+	ret = wl1271_acx_sleep_auth(wl, value);
+	if (ret < 0)
+		goto out_sleep;
+
+out_sleep:
+	wl1271_ps_elp_sleep(wl);
+out:
+	mutex_unlock(&wl->mutex);
+	return count;
+}
+
+static const struct file_operations sleep_auth_ops = {
+	.read = sleep_auth_read,
+	.write = sleep_auth_write,
+	.open = simple_open,
+	.llseek = default_llseek,
+};
+
 static int wl1271_debugfs_add_files(struct wl1271 *wl,
 				    struct dentry *rootdir)
 {
@@ -988,6 +1045,7 @@ static int wl1271_debugfs_add_files(struct wl1271 *wl,
 	DEBUGFS_ADD(irq_blk_threshold, rootdir);
 	DEBUGFS_ADD(irq_timeout, rootdir);
 	DEBUGFS_ADD(fw_stats_raw, rootdir);
+	DEBUGFS_ADD(sleep_auth, rootdir);
 
 	streaming = debugfs_create_dir("rx_streaming", rootdir);
 	if (!streaming || IS_ERR(streaming))
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 22b342f..7677cd5 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -1082,6 +1082,7 @@ int wl1271_plt_stop(struct wl1271 *wl)
 	mutex_lock(&wl->mutex);
 	wl1271_power_off(wl);
 	wl->flags = 0;
+	wl->sleep_auth = WL1271_PSM_CAM;
 	wl->state = WL1271_STATE_OFF;
 	wl->plt = false;
 	wl->rx_counter = 0;
@@ -1740,6 +1741,7 @@ static void wl1271_op_stop(struct ieee80211_hw *hw)
 	wl->ap_fw_ps_map = 0;
 	wl->ap_ps_map = 0;
 	wl->sched_scanning = false;
+	wl->sleep_auth = WL1271_PSM_CAM;
 	memset(wl->roles_map, 0, sizeof(wl->roles_map));
 	memset(wl->links_map, 0, sizeof(wl->links_map));
 	memset(wl->roc_map, 0, sizeof(wl->roc_map));
@@ -5174,6 +5176,7 @@ struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size)
 	wl->channel_type = NL80211_CHAN_NO_HT;
 	wl->flags = 0;
 	wl->sg_enabled = true;
+	wl->sleep_auth = WL1271_PSM_CAM;
 	wl->hw_pg_ver = -1;
 	wl->ap_ps_map = 0;
 	wl->ap_fw_ps_map = 0;
diff --git a/drivers/net/wireless/ti/wlcore/ps.c b/drivers/net/wireless/ti/wlcore/ps.c
index 47e81b3..95d8797 100644
--- a/drivers/net/wireless/ti/wlcore/ps.c
+++ b/drivers/net/wireless/ti/wlcore/ps.c
@@ -76,7 +76,7 @@ void wl1271_ps_elp_sleep(struct wl1271 *wl)
 	struct wl12xx_vif *wlvif;
 	u32 timeout;
 
-	if (wl->quirks & WLCORE_QUIRK_NO_ELP)
+	if (wl->sleep_auth != WL1271_PSM_ELP)
 		return;
 
 	/* we shouldn't get consecutive sleep requests */
diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h
index 761a72f..eae8edc 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -387,6 +387,9 @@ struct wl1271 {
 
 	/* mutex for protecting the tx_flush function */
 	struct mutex flush_mutex;
+
+	/* sleep auth value currently configured to FW */
+	int sleep_auth;
 };
 
 int __devinit wlcore_probe(struct wl1271 *wl, struct platform_device *pdev);
-- 
cgit v1.1


From 66340e5b259bd7ca67cf0ca079dd3997fa198d4b Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Sun, 10 Jun 2012 17:09:22 +0300
Subject: wlcore: allow setting sleep_auth before interface init

Hold a value for sta_sleep_auth that is amenable to change by debugfs.
When detecting a legal value in this variable on interface init, use it
as an override value for sleep_auth.

This makes debugging more intuitive using the debugfs value.

Increment the conf version since we added an element to the conf
structure.

Note: An AP going up will always set sleep_auth to PSM_CAM.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wl12xx/main.c    | 1 +
 drivers/net/wireless/ti/wl18xx/main.c    | 1 +
 drivers/net/wireless/ti/wlcore/acx.c     | 2 +-
 drivers/net/wireless/ti/wlcore/acx.h     | 3 +++
 drivers/net/wireless/ti/wlcore/conf.h    | 8 +++++++-
 drivers/net/wireless/ti/wlcore/debugfs.c | 7 ++++++-
 drivers/net/wireless/ti/wlcore/init.c    | 8 +++++++-
 drivers/net/wireless/ti/wlcore/main.c    | 2 +-
 8 files changed, 27 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index 85d1600..7974ed5 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -246,6 +246,7 @@ static struct wlcore_conf wl12xx_conf = {
 		.forced_ps                   = false,
 		.keep_alive_interval         = 55000,
 		.max_listen_interval         = 20,
+		.sta_sleep_auth              = WL1271_PSM_ILLEGAL,
 	},
 	.itrim = {
 		.enable = false,
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index b2ccff7..d3f171d 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -372,6 +372,7 @@ static struct wlcore_conf wl18xx_conf = {
 		.forced_ps                   = false,
 		.keep_alive_interval         = 55000,
 		.max_listen_interval         = 20,
+		.sta_sleep_auth              = WL1271_PSM_ILLEGAL,
 	},
 	.itrim = {
 		.enable = false,
diff --git a/drivers/net/wireless/ti/wlcore/acx.c b/drivers/net/wireless/ti/wlcore/acx.c
index b56217f..3384bc1 100644
--- a/drivers/net/wireless/ti/wlcore/acx.c
+++ b/drivers/net/wireless/ti/wlcore/acx.c
@@ -70,7 +70,7 @@ int wl1271_acx_sleep_auth(struct wl1271 *wl, u8 sleep_auth)
 	struct acx_sleep_auth *auth;
 	int ret;
 
-	wl1271_debug(DEBUG_ACX, "acx sleep auth");
+	wl1271_debug(DEBUG_ACX, "acx sleep auth %d", sleep_auth);
 
 	auth = kzalloc(sizeof(*auth), GFP_KERNEL);
 	if (!auth) {
diff --git a/drivers/net/wireless/ti/wlcore/acx.h b/drivers/net/wireless/ti/wlcore/acx.h
index 168e0464..d03215d 100644
--- a/drivers/net/wireless/ti/wlcore/acx.h
+++ b/drivers/net/wireless/ti/wlcore/acx.h
@@ -120,6 +120,9 @@ enum wl1271_psm_mode {
 	WL1271_PSM_ELP = 2,
 
 	WL1271_PSM_MAX = WL1271_PSM_ELP,
+
+	/* illegal out of band value of PSM mode */
+	WL1271_PSM_ILLEGAL = 0xff
 };
 
 struct acx_sleep_auth {
diff --git a/drivers/net/wireless/ti/wlcore/conf.h b/drivers/net/wireless/ti/wlcore/conf.h
index 03c6358..d77224f 100644
--- a/drivers/net/wireless/ti/wlcore/conf.h
+++ b/drivers/net/wireless/ti/wlcore/conf.h
@@ -951,6 +951,12 @@ struct conf_conn_settings {
 	 * Range: u16
 	 */
 	u8 max_listen_interval;
+
+	/*
+	 * Default sleep authorization for a new STA interface. This determines
+	 * whether we can go to ELP.
+	 */
+	u8 sta_sleep_auth;
 } __packed;
 
 enum {
@@ -1276,7 +1282,7 @@ struct conf_hangover_settings {
  * version, the two LSB are the lower driver's private conf
  * version.
  */
-#define WLCORE_CONF_VERSION	(0x0001 << 16)
+#define WLCORE_CONF_VERSION	(0x0002 << 16)
 #define WLCORE_CONF_MASK	0xffff0000
 #define WLCORE_CONF_SIZE	(sizeof(struct wlcore_conf_header) +	\
 				 sizeof(struct wlcore_conf))
diff --git a/drivers/net/wireless/ti/wlcore/debugfs.c b/drivers/net/wireless/ti/wlcore/debugfs.c
index 91e43def0..1768f37 100644
--- a/drivers/net/wireless/ti/wlcore/debugfs.c
+++ b/drivers/net/wireless/ti/wlcore/debugfs.c
@@ -995,8 +995,13 @@ static ssize_t sleep_auth_write(struct file *file,
 
 	mutex_lock(&wl->mutex);
 
-	if (wl->state == WL1271_STATE_OFF)
+	wl->conf.conn.sta_sleep_auth = value;
+
+	if (wl->state == WL1271_STATE_OFF) {
+		/* this will show up on "read" in case we are off */
+		wl->sleep_auth = value;
 		goto out;
+	}
 
 	ret = wl1271_ps_elp_wakeup(wl);
 	if (ret < 0)
diff --git a/drivers/net/wireless/ti/wlcore/init.c b/drivers/net/wireless/ti/wlcore/init.c
index 645abd4..3fb9352 100644
--- a/drivers/net/wireless/ti/wlcore/init.c
+++ b/drivers/net/wireless/ti/wlcore/init.c
@@ -565,7 +565,13 @@ int wl1271_init_vif_specific(struct wl1271 *wl, struct ieee80211_vif *vif)
 			if (ret < 0)
 				return ret;
 		} else if (!wl->sta_count) {
-			if (wl->quirks & WLCORE_QUIRK_NO_ELP) {
+			u8 sta_auth = wl->conf.conn.sta_sleep_auth;
+			if (sta_auth != WL1271_PSM_ILLEGAL) {
+				/* Configure for power according to debugfs */
+				ret = wl1271_acx_sleep_auth(wl, sta_auth);
+				if (ret < 0)
+					return ret;
+			} else if (wl->quirks & WLCORE_QUIRK_NO_ELP) {
 				/* Configure for power always on */
 				ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM);
 				if (ret < 0)
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 7677cd5..69643d1 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -5176,7 +5176,7 @@ struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size)
 	wl->channel_type = NL80211_CHAN_NO_HT;
 	wl->flags = 0;
 	wl->sg_enabled = true;
-	wl->sleep_auth = WL1271_PSM_CAM;
+	wl->sleep_auth = WL1271_PSM_ILLEGAL;
 	wl->hw_pg_ver = -1;
 	wl->ap_ps_map = 0;
 	wl->ap_fw_ps_map = 0;
-- 
cgit v1.1


From 2f18cf7c3b99779465def78318b4243d1f66cce8 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Sun, 10 Jun 2012 19:10:45 +0300
Subject: wlcore: reconfigure sleep_auth when removing interfaces

The sleep_auth value of the last interface to be set up prevailed when
an interface was removed. Take care of this by correctly configuring the
value according to the remaining STA/AP interfaces.

Take this opportunity to refactor the sleep_auth setting code for better
readability.

[Small style fix. -- Luca]

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/acx.c  |  5 +++-
 drivers/net/wireless/ti/wlcore/init.c | 49 +++++++++++++++--------------------
 drivers/net/wireless/ti/wlcore/main.c | 21 ++++++++++++---
 3 files changed, 43 insertions(+), 32 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/acx.c b/drivers/net/wireless/ti/wlcore/acx.c
index 3384bc1..ce108a7 100644
--- a/drivers/net/wireless/ti/wlcore/acx.c
+++ b/drivers/net/wireless/ti/wlcore/acx.c
@@ -81,8 +81,11 @@ int wl1271_acx_sleep_auth(struct wl1271 *wl, u8 sleep_auth)
 	auth->sleep_auth = sleep_auth;
 
 	ret = wl1271_cmd_configure(wl, ACX_SLEEP_AUTH, auth, sizeof(*auth));
-	if (ret < 0)
+	if (ret < 0) {
+		wl1271_error("could not configure sleep_auth to %d: %d",
+			     sleep_auth, ret);
 		goto out;
+	}
 
 	wl->sleep_auth = sleep_auth;
 out:
diff --git a/drivers/net/wireless/ti/wlcore/init.c b/drivers/net/wireless/ti/wlcore/init.c
index 3fb9352..8a8a897 100644
--- a/drivers/net/wireless/ti/wlcore/init.c
+++ b/drivers/net/wireless/ti/wlcore/init.c
@@ -554,35 +554,28 @@ int wl1271_init_vif_specific(struct wl1271 *wl, struct ieee80211_vif *vif)
 	bool is_ap = (wlvif->bss_type == BSS_TYPE_AP_BSS);
 	int ret, i;
 
-	/*
-	 * consider all existing roles before configuring psm.
-	 * TODO: reconfigure on interface removal.
-	 */
-	if (!wl->ap_count) {
-		if (is_ap) {
-			/* Configure for power always on */
+	/* consider all existing roles before configuring psm. */
+
+	if (wl->ap_count == 0 && is_ap) { /* first AP */
+		/* Configure for power always on */
+		ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM);
+		if (ret < 0)
+			return ret;
+	/* first STA, no APs */
+	} else if (wl->sta_count == 0 && wl->ap_count == 0 && !is_ap) {
+		u8 sta_auth = wl->conf.conn.sta_sleep_auth;
+		/* Configure for power according to debugfs */
+		if (sta_auth != WL1271_PSM_ILLEGAL)
+			ret = wl1271_acx_sleep_auth(wl, sta_auth);
+		/* Configure for power always on */
+		else if (wl->quirks & WLCORE_QUIRK_NO_ELP)
 			ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM);
-			if (ret < 0)
-				return ret;
-		} else if (!wl->sta_count) {
-			u8 sta_auth = wl->conf.conn.sta_sleep_auth;
-			if (sta_auth != WL1271_PSM_ILLEGAL) {
-				/* Configure for power according to debugfs */
-				ret = wl1271_acx_sleep_auth(wl, sta_auth);
-				if (ret < 0)
-					return ret;
-			} else if (wl->quirks & WLCORE_QUIRK_NO_ELP) {
-				/* Configure for power always on */
-				ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM);
-				if (ret < 0)
-					return ret;
-			} else {
-				/* Configure for ELP power saving */
-				ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_ELP);
-				if (ret < 0)
-					return ret;
-			}
-		}
+		/* Configure for ELP power saving */
+		else
+			ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_ELP);
+
+		if (ret < 0)
+			return ret;
 	}
 
 	/* Mode specific init */
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 69643d1..3279a94 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -1082,7 +1082,7 @@ int wl1271_plt_stop(struct wl1271 *wl)
 	mutex_lock(&wl->mutex);
 	wl1271_power_off(wl);
 	wl->flags = 0;
-	wl->sleep_auth = WL1271_PSM_CAM;
+	wl->sleep_auth = WL1271_PSM_ILLEGAL;
 	wl->state = WL1271_STATE_OFF;
 	wl->plt = false;
 	wl->rx_counter = 0;
@@ -1741,7 +1741,7 @@ static void wl1271_op_stop(struct ieee80211_hw *hw)
 	wl->ap_fw_ps_map = 0;
 	wl->ap_ps_map = 0;
 	wl->sched_scanning = false;
-	wl->sleep_auth = WL1271_PSM_CAM;
+	wl->sleep_auth = WL1271_PSM_ILLEGAL;
 	memset(wl->roles_map, 0, sizeof(wl->roles_map));
 	memset(wl->links_map, 0, sizeof(wl->links_map));
 	memset(wl->roc_map, 0, sizeof(wl->roc_map));
@@ -2148,6 +2148,7 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl,
 {
 	struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif);
 	int i, ret;
+	bool is_ap = (wlvif->bss_type == BSS_TYPE_AP_BSS);
 
 	wl1271_debug(DEBUG_MAC80211, "mac80211 remove interface");
 
@@ -2228,11 +2229,25 @@ deinit:
 	wlvif->role_id = WL12XX_INVALID_ROLE_ID;
 	wlvif->dev_role_id = WL12XX_INVALID_ROLE_ID;
 
-	if (wlvif->bss_type == BSS_TYPE_AP_BSS)
+	if (is_ap)
 		wl->ap_count--;
 	else
 		wl->sta_count--;
 
+	/* Last AP, have more stations. Configure according to STA. */
+	if (wl->ap_count == 0 && is_ap && wl->sta_count) {
+		u8 sta_auth = wl->conf.conn.sta_sleep_auth;
+		/* Configure for power according to debugfs */
+		if (sta_auth != WL1271_PSM_ILLEGAL)
+			wl1271_acx_sleep_auth(wl, sta_auth);
+		/* Configure for power always on */
+		else if (wl->quirks & WLCORE_QUIRK_NO_ELP)
+			wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM);
+		/* Configure for ELP power saving */
+		else
+			wl1271_acx_sleep_auth(wl, WL1271_PSM_ELP);
+	}
+
 	mutex_unlock(&wl->mutex);
 
 	del_timer_sync(&wlvif->rx_streaming_timer);
-- 
cgit v1.1


From 09aad14f6533d0db47b8077792fcb7c8fc881cf1 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Sun, 10 Jun 2012 22:57:30 +0300
Subject: wl18xx: increase Rx descriptors for PG2

New PG2 firmwares have additional Rx descriptors.

Add a module parameter to manually set the number of Rx descriptors for
older versions (PG1). We cannot discriminate based on chip-id, since
this value must be set on probe.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wl18xx/main.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index d3f171d..18cf19c 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -47,6 +47,7 @@ static char *ht_mode_param = "wide";
 static char *board_type_param = "hdk";
 static bool checksum_param = false;
 static bool enable_11a_param = true;
+static int num_rx_desc_param = -1;
 
 /* phy paramters */
 static int dc2dc_param = -1;
@@ -1286,7 +1287,7 @@ static int __devinit wl18xx_probe(struct platform_device *pdev)
 	wl->ptable = wl18xx_ptable;
 	wl->rtable = wl18xx_rtable;
 	wl->num_tx_desc = 32;
-	wl->num_rx_desc = 16;
+	wl->num_rx_desc = 32;
 	wl->band_rate_to_idx = wl18xx_band_rate_to_idx;
 	wl->hw_tx_rate_tbl_size = WL18XX_CONF_HW_RXTX_RATE_MAX;
 	wl->hw_min_ht_rate = WL18XX_CONF_HW_RXTX_RATE_MCS0;
@@ -1294,6 +1295,9 @@ static int __devinit wl18xx_probe(struct platform_device *pdev)
 	wl->stats.fw_stats_len = sizeof(struct wl18xx_acx_statistics);
 	wl->static_data_priv_len = sizeof(struct wl18xx_static_data_priv);
 
+	if (num_rx_desc_param != -1)
+		wl->num_rx_desc = num_rx_desc_param;
+
 	if (!strcmp(ht_mode_param, "wide")) {
 		memcpy(&wl->ht_cap[IEEE80211_BAND_2GHZ],
 		       &wl18xx_siso40_ht_cap,
@@ -1458,6 +1462,11 @@ module_param_named(pwr_limit_reference_11_abg,
 MODULE_PARM_DESC(pwr_limit_reference_11_abg, "Power limit reference: u8 "
 		 "(default is 0xc8)");
 
+module_param_named(num_rx_desc,
+		   num_rx_desc_param, int, S_IRUSR);
+MODULE_PARM_DESC(num_rx_desc_param,
+		 "Number of Rx descriptors: u8 (default is 32)");
+
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
 MODULE_FIRMWARE(WL18XX_FW_NAME);
-- 
cgit v1.1


From bf7c46a7672830eb13898b2871de7780448f0674 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 11 Jun 2012 10:41:08 +0300
Subject: wl18xx: set Tx align quirk for PG2

Before patch b5d6d9b (wlcore/wl12xx/wl18xx: don't use TX align quirk
for wl127x), this was automatically set for all platforms. As this
should now be set explicitly, set it for PG2 as well.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wl18xx/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index 18cf19c..066e8e5 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -608,8 +608,8 @@ static int wl18xx_identify_chip(struct wl1271 *wl)
 		wl->plt_fw_name = WL18XX_FW_NAME;
 		wl->quirks |= WLCORE_QUIRK_NO_ELP |
 			      WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN |
+			      WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN |
 			      WLCORE_QUIRK_TX_PAD_LAST_FRAME;
-
 		break;
 	case CHIP_ID_185x_PG10:
 		wl1271_debug(DEBUG_BOOT, "chip id 0x%x (185x PG10)",
-- 
cgit v1.1


From add779a0738a6bd199b3c5b9f0f8090036e53ff0 Mon Sep 17 00:00:00 2001
From: Yoni Divinsky <yoni.divinsky@ti.com>
Date: Wed, 13 Jun 2012 18:56:54 +0300
Subject: wlcore: do not report noise level in get survey op

The get survey op expects the low level driver to report
the noise level for a a given channel.

The noise calculated in wlcore is (rssi-snr/2), but since
the snr reported by the FW is a derivative from the rssi
this calculation is useless, and should not be reported
to the user space.

Reporting incorrect noise, results in the wpa_supplicant
miscalculating the roaming candidate priority, thus causing
a situation where an AP with a lower rssi level would be
chosen over a better AP.

Signed-off-by: Yoni Divinsky <yoni.divinsky@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/main.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 3279a94..a7c5e32 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -4108,16 +4108,13 @@ out:
 static int wl1271_op_get_survey(struct ieee80211_hw *hw, int idx,
 				struct survey_info *survey)
 {
-	struct wl1271 *wl = hw->priv;
 	struct ieee80211_conf *conf = &hw->conf;
 
 	if (idx != 0)
 		return -ENOENT;
 
 	survey->channel = conf->channel;
-	survey->filled = SURVEY_INFO_NOISE_DBM;
-	survey->noise = wl->noise;
-
+	survey->filled = 0;
 	return 0;
 }
 
-- 
cgit v1.1


From 1e41213fe738e8f8e3fd69dd490ac7e4faaa184f Mon Sep 17 00:00:00 2001
From: Igal Chernobelsky <igalc@ti.com>
Date: Mon, 18 Jun 2012 11:05:39 +0300
Subject: wlcore: read FW logs from FW memory on watchdog recovery

FW uses a few memory blocks as a buffer to accumulate FW logs before
transmitting them to the host over SDIO. When FW WatchDog recovery
occurs, the last FW traces are still pending in the buffer. Driver is
to read these FW traces whether log mode is continuous or on demand.

FW memory blocks allocated for the log buffer are handled as a link list:
the first 4 bytes in each memory block contain FW address to the next block.
The end of list condition depends on FW log mode:
- on demand: the list is cyclic, the next address is equal to the first address
- continuous: the address is  equal to 0x2000000

Log data resides inside FW memory block with offset depending on
logger mode:
- on demand:  4 bytes (address of the next memory block)
- continuous: 4 bytes and Rx Descriptor structure size

Described FW logger API is backward compatible with previous FW versions.

Signed-off-by: Igal Chernobelsky <igalc@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/main.c | 34 ++++++++++++++++++++++------------
 1 file changed, 22 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index a7c5e32..78edc58 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -770,14 +770,16 @@ size_t wl12xx_copy_fwlog(struct wl1271 *wl, u8 *memblock, size_t maxlen)
 	return len;
 }
 
+#define WLCORE_FW_LOG_END 0x2000000
+
 static void wl12xx_read_fwlog_panic(struct wl1271 *wl)
 {
 	u32 addr;
-	u32 first_addr;
+	u32 offset;
+	u32 end_of_log;
 	u8 *block;
 
 	if ((wl->quirks & WLCORE_QUIRK_FWLOG_NOT_IMPLEMENTED) ||
-	    (wl->conf.fwlog.mode != WL12XX_FWLOG_ON_DEMAND) ||
 	    (wl->conf.fwlog.mem_blocks == 0))
 		return;
 
@@ -791,19 +793,26 @@ static void wl12xx_read_fwlog_panic(struct wl1271 *wl)
 	 * Make sure the chip is awake and the logger isn't active.
 	 * Do not send a stop fwlog command if the fw is hanged.
 	 */
-	if (!wl1271_ps_elp_wakeup(wl) && !wl->watchdog_recovery)
-		wl12xx_cmd_stop_fwlog(wl);
-	else
+	if (wl1271_ps_elp_wakeup(wl))
 		goto out;
+	if (!wl->watchdog_recovery)
+		wl12xx_cmd_stop_fwlog(wl);
 
 	/* Read the first memory block address */
 	wl12xx_fw_status(wl, wl->fw_status_1, wl->fw_status_2);
-	first_addr = le32_to_cpu(wl->fw_status_2->log_start_addr);
-	if (!first_addr)
+	addr = le32_to_cpu(wl->fw_status_2->log_start_addr);
+	if (!addr)
 		goto out;
 
+	if (wl->conf.fwlog.mode == WL12XX_FWLOG_CONTINUOUS) {
+		offset = sizeof(addr) + sizeof(struct wl1271_rx_descriptor);
+		end_of_log = WLCORE_FW_LOG_END;
+	} else {
+		offset = sizeof(addr);
+		end_of_log = addr;
+	}
+
 	/* Traverse the memory blocks linked list */
-	addr = first_addr;
 	do {
 		memset(block, 0, WL12XX_HW_BLOCK_SIZE);
 		wl1271_read_hwaddr(wl, addr, block, WL12XX_HW_BLOCK_SIZE,
@@ -812,13 +821,14 @@ static void wl12xx_read_fwlog_panic(struct wl1271 *wl)
 		/*
 		 * Memory blocks are linked to one another. The first 4 bytes
 		 * of each memory block hold the hardware address of the next
-		 * one. The last memory block points to the first one.
+		 * one. The last memory block points to the first one in
+		 * on demand mode and is equal to 0x2000000 in continuous mode.
 		 */
 		addr = le32_to_cpup((__le32 *)block);
-		if (!wl12xx_copy_fwlog(wl, block + sizeof(addr),
-				       WL12XX_HW_BLOCK_SIZE - sizeof(addr)))
+		if (!wl12xx_copy_fwlog(wl, block + offset,
+				       WL12XX_HW_BLOCK_SIZE - offset))
 			break;
-	} while (addr && (addr != first_addr));
+	} while (addr && (addr != end_of_log));
 
 	wake_up_interruptible(&wl->fwlog_waitq);
 
-- 
cgit v1.1


From 68a847f2c1ea2b974a28c5b537fe846522d7a9c0 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Wed, 13 Jun 2012 19:09:24 +0300
Subject: wl18xx: explicitly remove the 5Ghz MIMO HT cap

The 18xx chip does not support MIMO in 5Ghz. Use the siso20 HT cap as
fallback in 5Ghz when "mimo" is requested.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wl18xx/main.c | 17 +++--------------
 1 file changed, 3 insertions(+), 14 deletions(-)

diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index 066e8e5..365063b 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -1255,18 +1255,6 @@ static struct ieee80211_sta_ht_cap wl18xx_mimo_ht_cap_2ghz = {
 		},
 };
 
-static struct ieee80211_sta_ht_cap wl18xx_mimo_ht_cap_5ghz = {
-	.cap = IEEE80211_HT_CAP_SGI_20,
-	.ht_supported = true,
-	.ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K,
-	.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16,
-	.mcs = {
-		.rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, },
-		.rx_highest = cpu_to_le16(72),
-		.tx_params = IEEE80211_HT_MCS_TX_DEFINED,
-		},
-};
-
 static int __devinit wl18xx_probe(struct platform_device *pdev)
 {
 	struct wl1271 *wl;
@@ -1309,9 +1297,10 @@ static int __devinit wl18xx_probe(struct platform_device *pdev)
 		memcpy(&wl->ht_cap[IEEE80211_BAND_2GHZ],
 		       &wl18xx_mimo_ht_cap_2ghz,
 		       sizeof(wl18xx_mimo_ht_cap_2ghz));
+		/* we don't support MIMO in 5Ghz */
 		memcpy(&wl->ht_cap[IEEE80211_BAND_5GHZ],
-		       &wl18xx_mimo_ht_cap_5ghz,
-		       sizeof(wl18xx_mimo_ht_cap_5ghz));
+		       &wl18xx_siso20_ht_cap,
+		       sizeof(wl18xx_siso20_ht_cap));
 	} else if (!strcmp(ht_mode_param, "siso20")) {
 		memcpy(&wl->ht_cap[IEEE80211_BAND_2GHZ],
 		       &wl18xx_siso20_ht_cap,
-- 
cgit v1.1


From fa2adfcdbd88124e8b7cc46c6363b1343dabc09d Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Wed, 13 Jun 2012 19:09:25 +0300
Subject: wl18xx: sane defaults for HT capabilities

Introduce a default set of HT capabilities that are set according to the
number of antennas on the board. Move the HT setting code down to allow
the number of antennas to be set (and optionally overridden) before it.

Remove the "mimo" HT option, since the default mode now enables MIMO is
possible.

Use this opportunity to add a helper function for setting HT
capabilities and reduce the volume of the code a bit.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wl12xx/main.c   |  6 ++--
 drivers/net/wireless/ti/wl18xx/main.c   | 63 +++++++++++++++++----------------
 drivers/net/wireless/ti/wlcore/wlcore.h |  7 ++++
 3 files changed, 42 insertions(+), 34 deletions(-)

diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index 7974ed5..0d2fdca 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -1449,10 +1449,8 @@ static int __devinit wl12xx_probe(struct platform_device *pdev)
 	wl->hw_min_ht_rate = WL12XX_CONF_HW_RXTX_RATE_MCS0;
 	wl->fw_status_priv_len = 0;
 	wl->stats.fw_stats_len = sizeof(struct wl12xx_acx_statistics);
-	memcpy(&wl->ht_cap[IEEE80211_BAND_2GHZ], &wl12xx_ht_cap,
-	       sizeof(wl12xx_ht_cap));
-	memcpy(&wl->ht_cap[IEEE80211_BAND_5GHZ], &wl12xx_ht_cap,
-	       sizeof(wl12xx_ht_cap));
+	wlcore_set_ht_cap(wl, IEEE80211_BAND_2GHZ, &wl12xx_ht_cap);
+	wlcore_set_ht_cap(wl, IEEE80211_BAND_5GHZ, &wl12xx_ht_cap);
 	wl12xx_conf_init(wl);
 
 	if (!fref_param) {
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index 365063b..485aeae 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -43,7 +43,7 @@
 
 #define WL18XX_RX_CHECKSUM_MASK      0x40
 
-static char *ht_mode_param = "wide";
+static char *ht_mode_param = "default";
 static char *board_type_param = "hdk";
 static bool checksum_param = false;
 static bool enable_11a_param = true;
@@ -1286,34 +1286,6 @@ static int __devinit wl18xx_probe(struct platform_device *pdev)
 	if (num_rx_desc_param != -1)
 		wl->num_rx_desc = num_rx_desc_param;
 
-	if (!strcmp(ht_mode_param, "wide")) {
-		memcpy(&wl->ht_cap[IEEE80211_BAND_2GHZ],
-		       &wl18xx_siso40_ht_cap,
-		       sizeof(wl18xx_siso40_ht_cap));
-		memcpy(&wl->ht_cap[IEEE80211_BAND_5GHZ],
-		       &wl18xx_siso40_ht_cap,
-		       sizeof(wl18xx_siso40_ht_cap));
-	} else if (!strcmp(ht_mode_param, "mimo")) {
-		memcpy(&wl->ht_cap[IEEE80211_BAND_2GHZ],
-		       &wl18xx_mimo_ht_cap_2ghz,
-		       sizeof(wl18xx_mimo_ht_cap_2ghz));
-		/* we don't support MIMO in 5Ghz */
-		memcpy(&wl->ht_cap[IEEE80211_BAND_5GHZ],
-		       &wl18xx_siso20_ht_cap,
-		       sizeof(wl18xx_siso20_ht_cap));
-	} else if (!strcmp(ht_mode_param, "siso20")) {
-		memcpy(&wl->ht_cap[IEEE80211_BAND_2GHZ],
-		       &wl18xx_siso20_ht_cap,
-		       sizeof(wl18xx_siso20_ht_cap));
-		memcpy(&wl->ht_cap[IEEE80211_BAND_5GHZ],
-		       &wl18xx_siso20_ht_cap,
-		       sizeof(wl18xx_siso20_ht_cap));
-	} else {
-		wl1271_error("invalid ht_mode '%s'", ht_mode_param);
-		ret = -EINVAL;
-		goto out_free;
-	}
-
 	ret = wl18xx_conf_init(wl, &pdev->dev);
 	if (ret < 0)
 		goto out_free;
@@ -1359,6 +1331,37 @@ static int __devinit wl18xx_probe(struct platform_device *pdev)
 	if (dc2dc_param != -1)
 		priv->conf.phy.external_pa_dc2dc = dc2dc_param;
 
+	if (!strcmp(ht_mode_param, "default")) {
+		/*
+		 * Only support mimo with multiple antennas. Fall back to
+		 * siso20.
+		 */
+		if (priv->conf.phy.number_of_assembled_ant2_4 >= 2)
+			wlcore_set_ht_cap(wl, IEEE80211_BAND_2GHZ,
+					  &wl18xx_mimo_ht_cap_2ghz);
+		else
+			wlcore_set_ht_cap(wl, IEEE80211_BAND_2GHZ,
+					  &wl18xx_siso20_ht_cap);
+
+		/* 5Ghz is always wide */
+		wlcore_set_ht_cap(wl, IEEE80211_BAND_5GHZ,
+				  &wl18xx_siso40_ht_cap);
+	} else if (!strcmp(ht_mode_param, "wide")) {
+		wlcore_set_ht_cap(wl, IEEE80211_BAND_2GHZ,
+				  &wl18xx_siso40_ht_cap);
+		wlcore_set_ht_cap(wl, IEEE80211_BAND_5GHZ,
+				  &wl18xx_siso40_ht_cap);
+	} else if (!strcmp(ht_mode_param, "siso20")) {
+		wlcore_set_ht_cap(wl, IEEE80211_BAND_2GHZ,
+				  &wl18xx_siso20_ht_cap);
+		wlcore_set_ht_cap(wl, IEEE80211_BAND_5GHZ,
+				  &wl18xx_siso20_ht_cap);
+	} else {
+		wl1271_error("invalid ht_mode '%s'", ht_mode_param);
+		ret = -EINVAL;
+		goto out_free;
+	}
+
 	if (!checksum_param) {
 		wl18xx_ops.set_rx_csum = NULL;
 		wl18xx_ops.init_vif = NULL;
@@ -1403,7 +1406,7 @@ static void __exit wl18xx_exit(void)
 module_exit(wl18xx_exit);
 
 module_param_named(ht_mode, ht_mode_param, charp, S_IRUSR);
-MODULE_PARM_DESC(ht_mode, "Force HT mode: wide (default), mimo or siso20");
+MODULE_PARM_DESC(ht_mode, "Force HT mode: wide or siso20");
 
 module_param_named(board_type, board_type_param, charp, S_IRUSR);
 MODULE_PARM_DESC(board_type, "Board type: fpga, hdk (default), evb, com8 or "
diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h
index eae8edc..205d8ad 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -401,6 +401,13 @@ int wlcore_set_key(struct wl1271 *wl, enum set_key_cmd cmd,
 		   struct ieee80211_sta *sta,
 		   struct ieee80211_key_conf *key_conf);
 
+static inline void
+wlcore_set_ht_cap(struct wl1271 *wl, enum ieee80211_band band,
+		  struct ieee80211_sta_ht_cap *ht_cap)
+{
+	memcpy(&wl->ht_cap[band], ht_cap, sizeof(*ht_cap));
+}
+
 /* Firmware image load chunk size */
 #define CHUNK_SIZE	16384
 
-- 
cgit v1.1


From 93fb19bbb37c734ec0c662aa600d1d6a12c1be70 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Wed, 13 Jun 2012 19:09:26 +0300
Subject: wl18xx: split siso40 HT cap between 2Ghz and 5Ghz

Remove the cap IEEE80211_HT_CAP_DSSSCCK40 from the 5Ghz variant of
the siso40 HT capabilities. It is meaningless in 5Ghz.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wl18xx/main.c | 24 +++++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index 485aeae..2c0f51b 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -1215,8 +1215,8 @@ static struct wlcore_ops wl18xx_ops = {
 	.pre_pkt_send	= wl18xx_pre_pkt_send,
 };
 
-/* HT cap appropriate for wide channels */
-static struct ieee80211_sta_ht_cap wl18xx_siso40_ht_cap = {
+/* HT cap appropriate for wide channels in 2Ghz */
+static struct ieee80211_sta_ht_cap wl18xx_siso40_ht_cap_2ghz = {
 	.cap = IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40 |
 	       IEEE80211_HT_CAP_SUP_WIDTH_20_40 | IEEE80211_HT_CAP_DSSSCCK40,
 	.ht_supported = true,
@@ -1229,6 +1229,20 @@ static struct ieee80211_sta_ht_cap wl18xx_siso40_ht_cap = {
 		},
 };
 
+/* HT cap appropriate for wide channels in 5Ghz */
+static struct ieee80211_sta_ht_cap wl18xx_siso40_ht_cap_5ghz = {
+	.cap = IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40 |
+	       IEEE80211_HT_CAP_SUP_WIDTH_20_40,
+	.ht_supported = true,
+	.ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K,
+	.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16,
+	.mcs = {
+		.rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, },
+		.rx_highest = cpu_to_le16(150),
+		.tx_params = IEEE80211_HT_MCS_TX_DEFINED,
+		},
+};
+
 /* HT cap appropriate for SISO 20 */
 static struct ieee80211_sta_ht_cap wl18xx_siso20_ht_cap = {
 	.cap = IEEE80211_HT_CAP_SGI_20,
@@ -1345,12 +1359,12 @@ static int __devinit wl18xx_probe(struct platform_device *pdev)
 
 		/* 5Ghz is always wide */
 		wlcore_set_ht_cap(wl, IEEE80211_BAND_5GHZ,
-				  &wl18xx_siso40_ht_cap);
+				  &wl18xx_siso40_ht_cap_5ghz);
 	} else if (!strcmp(ht_mode_param, "wide")) {
 		wlcore_set_ht_cap(wl, IEEE80211_BAND_2GHZ,
-				  &wl18xx_siso40_ht_cap);
+				  &wl18xx_siso40_ht_cap_2ghz);
 		wlcore_set_ht_cap(wl, IEEE80211_BAND_5GHZ,
-				  &wl18xx_siso40_ht_cap);
+				  &wl18xx_siso40_ht_cap_5ghz);
 	} else if (!strcmp(ht_mode_param, "siso20")) {
 		wlcore_set_ht_cap(wl, IEEE80211_BAND_2GHZ,
 				  &wl18xx_siso20_ht_cap);
-- 
cgit v1.1


From 41844076c5c3a33636b5c26d19b16c6141c5d6cd Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Thu, 21 Jun 2012 15:33:10 +0300
Subject: wl18xx: use %zu for size_t arguments in printk calls

After 934b9d1e (wl18xx: avoid some -Wformat warnings) there was still
a warning with (at least) ARM gcc version 4.4.1:

drivers/net/wireless/ti/wl18xx/main.c: In function 'wl18xx_conf_init':
drivers/net/wireless/ti/wl18xx/main.c:1026: warning: format '%ld' expects type 'long int', but argument 2 has type 'unsigned int'

Fix this by using %zu for the both formats, since the fw->size and the
macro (derived from sizeof()) are size_t.

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wl18xx/main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index 2c0f51b..271ff81 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -1023,8 +1023,8 @@ static int wl18xx_conf_init(struct wl1271 *wl, struct device *dev)
 	}
 
 	if (fw->size != WL18XX_CONF_SIZE) {
-		wl1271_error("configuration binary file size is wrong, "
-			     "expected %d got %d", WL18XX_CONF_SIZE, fw->size);
+		wl1271_error("configuration binary file size is wrong, expected %zu got %zu",
+			     WL18XX_CONF_SIZE, fw->size);
 		ret = -EINVAL;
 		goto out;
 	}
-- 
cgit v1.1


From 66572cfc30a4b764150c83ee5d842a3ce17991c9 Mon Sep 17 00:00:00 2001
From: Victor Goldenshtein <victorg@ti.com>
Date: Thu, 21 Jun 2012 10:56:46 +0300
Subject: mac80211: add command to get current rssi

Get current rssi (in dBm) from the driver/FW.

Instead of reporting the signal received in the last
rx packet, which might be inaccurate if rx traffic is
low and beacon filtering is enabled, get the signal
from the driver/FW.

Signed-off-by: Victor Goldenshtein <victorg@ti.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/net/mac80211.h      |  5 +++++
 net/mac80211/cfg.c          | 21 +++++++++++++--------
 net/mac80211/driver-ops.h   | 15 +++++++++++++++
 net/mac80211/driver-trace.h | 26 ++++++++++++++++++++++++++
 4 files changed, 59 insertions(+), 8 deletions(-)

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index d152f54..f11c2f8 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -2249,6 +2249,9 @@ enum ieee80211_rate_control_changed {
  * @get_et_strings:  Ethtool API to get a set of strings to describe stats
  *	and perhaps other supported types of ethtool data-sets.
  *
+ * @get_rssi: Get current signal strength in dBm, the function is optional
+ *	and can sleep.
+ *
  */
 struct ieee80211_ops {
 	void (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
@@ -2388,6 +2391,8 @@ struct ieee80211_ops {
 	void	(*get_et_strings)(struct ieee80211_hw *hw,
 				  struct ieee80211_vif *vif,
 				  u32 sset, u8 *data);
+	int	(*get_rssi)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			    struct ieee80211_sta *sta, s8 *rssi_dbm);
 };
 
 /**
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 03aff23..d0c8f78 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -353,6 +353,7 @@ void sta_set_rate_info_tx(struct sta_info *sta,
 static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo)
 {
 	struct ieee80211_sub_if_data *sdata = sta->sdata;
+	struct ieee80211_local *local = sdata->local;
 	struct timespec uptime;
 
 	sinfo->generation = sdata->local->sta_generation;
@@ -388,7 +389,9 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo)
 	if ((sta->local->hw.flags & IEEE80211_HW_SIGNAL_DBM) ||
 	    (sta->local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)) {
 		sinfo->filled |= STATION_INFO_SIGNAL | STATION_INFO_SIGNAL_AVG;
-		sinfo->signal = (s8)sta->last_signal;
+		if (!local->ops->get_rssi ||
+		    drv_get_rssi(local, sdata, &sta->sta, &sinfo->signal))
+			sinfo->signal = (s8)sta->last_signal;
 		sinfo->signal_avg = (s8) -ewma_read(&sta->avg_signal);
 	}
 
@@ -517,7 +520,7 @@ static void ieee80211_get_et_stats(struct wiphy *wiphy,
 	 * network device.
 	 */
 
-	rcu_read_lock();
+	mutex_lock(&local->sta_mtx);
 
 	if (sdata->vif.type == NL80211_IFTYPE_STATION) {
 		sta = sta_info_get_bss(sdata, sdata->u.mgd.bssid);
@@ -546,7 +549,7 @@ static void ieee80211_get_et_stats(struct wiphy *wiphy,
 			data[i] = (u8)sinfo.signal_avg;
 		i++;
 	} else {
-		list_for_each_entry_rcu(sta, &local->sta_list, list) {
+		list_for_each_entry(sta, &local->sta_list, list) {
 			/* Make sure this station belongs to the proper dev */
 			if (sta->sdata->dev != dev)
 				continue;
@@ -603,7 +606,7 @@ do_survey:
 	else
 		data[i++] = -1LL;
 
-	rcu_read_unlock();
+	mutex_unlock(&local->sta_mtx);
 
 	if (WARN_ON(i != STA_STATS_LEN))
 		return;
@@ -629,10 +632,11 @@ static int ieee80211_dump_station(struct wiphy *wiphy, struct net_device *dev,
 				 int idx, u8 *mac, struct station_info *sinfo)
 {
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = sdata->local;
 	struct sta_info *sta;
 	int ret = -ENOENT;
 
-	rcu_read_lock();
+	mutex_lock(&local->sta_mtx);
 
 	sta = sta_info_get_by_idx(sdata, idx);
 	if (sta) {
@@ -641,7 +645,7 @@ static int ieee80211_dump_station(struct wiphy *wiphy, struct net_device *dev,
 		sta_set_sinfo(sta, sinfo);
 	}
 
-	rcu_read_unlock();
+	mutex_unlock(&local->sta_mtx);
 
 	return ret;
 }
@@ -658,10 +662,11 @@ static int ieee80211_get_station(struct wiphy *wiphy, struct net_device *dev,
 				 u8 *mac, struct station_info *sinfo)
 {
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = sdata->local;
 	struct sta_info *sta;
 	int ret = -ENOENT;
 
-	rcu_read_lock();
+	mutex_lock(&local->sta_mtx);
 
 	sta = sta_info_get_bss(sdata, mac);
 	if (sta) {
@@ -669,7 +674,7 @@ static int ieee80211_get_station(struct wiphy *wiphy, struct net_device *dev,
 		sta_set_sinfo(sta, sinfo);
 	}
 
-	rcu_read_unlock();
+	mutex_unlock(&local->sta_mtx);
 
 	return ret;
 }
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index 6d33a0c..9330269 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -845,4 +845,19 @@ drv_allow_buffered_frames(struct ieee80211_local *local,
 						  more_data);
 	trace_drv_return_void(local);
 }
+
+static inline int drv_get_rssi(struct ieee80211_local *local,
+				struct ieee80211_sub_if_data *sdata,
+				struct ieee80211_sta *sta,
+				s8 *rssi_dbm)
+{
+	int ret;
+
+	might_sleep();
+
+	ret = local->ops->get_rssi(&local->hw, &sdata->vif, sta, rssi_dbm);
+	trace_drv_get_rssi(local, sta, *rssi_dbm, ret);
+
+	return ret;
+}
 #endif /* __MAC80211_DRIVER_OPS */
diff --git a/net/mac80211/driver-trace.h b/net/mac80211/driver-trace.h
index 6de00b2..a0f7d35 100644
--- a/net/mac80211/driver-trace.h
+++ b/net/mac80211/driver-trace.h
@@ -1218,6 +1218,32 @@ DEFINE_EVENT(release_evt, drv_allow_buffered_frames,
 	TP_ARGS(local, sta, tids, num_frames, reason, more_data)
 );
 
+TRACE_EVENT(drv_get_rssi,
+	TP_PROTO(struct ieee80211_local *local, struct ieee80211_sta *sta,
+		 s8 rssi, int ret),
+
+	TP_ARGS(local, sta, rssi, ret),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		STA_ENTRY
+		__field(s8, rssi)
+		__field(int, ret)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		STA_ASSIGN;
+		__entry->rssi = rssi;
+		__entry->ret = ret;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT STA_PR_FMT " rssi:%d ret:%d",
+		LOCAL_PR_ARG, STA_PR_ARG, __entry->rssi, __entry->ret
+	)
+);
+
 /*
  * Tracing for API calls that drivers call.
  */
-- 
cgit v1.1


From c2ebea2097f84f0973c58b8467c1a2236bbb307a Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Wed, 20 Jun 2012 17:59:01 -0700
Subject: ieee80211: more OUI type definitions for WLAN_OUI_MICROSOFT

WMM and WPS

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/linux/ieee80211.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 6e06011..318fc1f 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1633,6 +1633,8 @@ enum ieee80211_sa_query_action {
 #define WLAN_OUI_TYPE_WFA_P2P		9
 #define WLAN_OUI_MICROSOFT		0x0050f2
 #define WLAN_OUI_TYPE_MICROSOFT_WPA	1
+#define WLAN_OUI_TYPE_MICROSOFT_WMM	2
+#define WLAN_OUI_TYPE_MICROSOFT_WPS	4
 
 /*
  * WMM/802.11e Tspec Element
-- 
cgit v1.1


From 645865fc377c9ac73df590abf8e6af65824390a3 Mon Sep 17 00:00:00 2001
From: Ido Yariv <ido@wizery.com>
Date: Sun, 20 May 2012 10:38:16 +0300
Subject: wlcore: Fix sdio out-of-sync power state

wl12xx_sdio_power_off() manually powers down the card regardless of the
runtime pm state. If wl12xx_sdio_power_on() is called before the card
was suspended by runtime PM, it will not power up the card.

As part of the HW detection, the chip's power is toggled. Since this
happens in the context of probing sdio, the power reference counter will
be higher than zero. As a result, when wl12xx_sdio_power_off() is
called, the chip will be powered down while still having a positive
power reference counter. If the interface is quickly activated, the
driver might try to transfer data to a powered off chip.

Fix this by ensuring that wl12xx_sdio_power_on() explicitly powers on
the chip in case runtime pm claims the chip is already powered on. To
avoid cases in which it is not possible to determine if the chip was
really powered on (card's power reference counter is positive), operate
on the mmc_card instead of the function.

Also verify that the chip is indeed powered on before powering off, to
avoid wrong reference counter values in error cases.

Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/io.h   | 10 ++++++++--
 drivers/net/wireless/ti/wlcore/sdio.c | 34 +++++++++++++++++++---------------
 2 files changed, 27 insertions(+), 17 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/io.h b/drivers/net/wireless/ti/wlcore/io.h
index 8942954..404cb14 100644
--- a/drivers/net/wireless/ti/wlcore/io.h
+++ b/drivers/net/wireless/ti/wlcore/io.h
@@ -160,8 +160,14 @@ static inline void wlcore_write_reg(struct wl1271 *wl, int reg, u32 val)
 
 static inline void wl1271_power_off(struct wl1271 *wl)
 {
-	wl->if_ops->power(wl->dev, false);
-	clear_bit(WL1271_FLAG_GPIO_POWER, &wl->flags);
+	int ret;
+
+	if (!test_bit(WL1271_FLAG_GPIO_POWER, &wl->flags))
+		return;
+
+	ret = wl->if_ops->power(wl->dev, false);
+	if (!ret)
+		clear_bit(WL1271_FLAG_GPIO_POWER, &wl->flags);
 }
 
 static inline int wl1271_power_on(struct wl1271 *wl)
diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c
index c67ec48..4edaa20 100644
--- a/drivers/net/wireless/ti/wlcore/sdio.c
+++ b/drivers/net/wireless/ti/wlcore/sdio.c
@@ -147,17 +147,20 @@ static int wl12xx_sdio_power_on(struct wl12xx_sdio_glue *glue)
 {
 	int ret;
 	struct sdio_func *func = dev_to_sdio_func(glue->dev);
+	struct mmc_card *card = func->card;
 
-	/* If enabled, tell runtime PM not to power off the card */
-	if (pm_runtime_enabled(&func->dev)) {
-		ret = pm_runtime_get_sync(&func->dev);
-		if (ret < 0)
-			goto out;
-	} else {
-		/* Runtime PM is disabled: power up the card manually */
-		ret = mmc_power_restore_host(func->card->host);
-		if (ret < 0)
+	ret = pm_runtime_get_sync(&card->dev);
+	if (ret) {
+		/*
+		 * Runtime PM might be temporarily disabled, or the device
+		 * might have a positive reference counter. Make sure it is
+		 * really powered on.
+		 */
+		ret = mmc_power_restore_host(card->host);
+		if (ret < 0) {
+			pm_runtime_put_sync(&card->dev);
 			goto out;
+		}
 	}
 
 	sdio_claim_host(func);
@@ -172,20 +175,21 @@ static int wl12xx_sdio_power_off(struct wl12xx_sdio_glue *glue)
 {
 	int ret;
 	struct sdio_func *func = dev_to_sdio_func(glue->dev);
+	struct mmc_card *card = func->card;
 
 	sdio_claim_host(func);
 	sdio_disable_func(func);
 	sdio_release_host(func);
 
-	/* Power off the card manually, even if runtime PM is enabled. */
-	ret = mmc_power_save_host(func->card->host);
+	/* Power off the card manually in case it wasn't powered off above */
+	ret = mmc_power_save_host(card->host);
 	if (ret < 0)
-		return ret;
+		goto out;
 
-	/* If enabled, let runtime PM know the card is powered off */
-	if (pm_runtime_enabled(&func->dev))
-		ret = pm_runtime_put_sync(&func->dev);
+	/* Let runtime PM know the card is powered off */
+	pm_runtime_put_sync(&card->dev);
 
+out:
 	return ret;
 }
 
-- 
cgit v1.1


From b666bb7f2fe2bdc0309b0d58afb48eae85d92221 Mon Sep 17 00:00:00 2001
From: Ido Yariv <ido@wizery.com>
Date: Mon, 21 May 2012 01:10:11 +0300
Subject: wlcore: Disable interrupts while recovering

In case a recovery is initiated, the FW can no longer be trusted, and
the driver should not handle any new FW events.

Disable the interrupt handler when a recovery is scheduled and balance
it back in the op_stop callback.

Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/io.c   |  6 ++++++
 drivers/net/wireless/ti/wlcore/io.h   |  1 +
 drivers/net/wireless/ti/wlcore/main.c | 21 +++++++++++++++------
 3 files changed, 22 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/io.c b/drivers/net/wireless/ti/wlcore/io.c
index 7cd0081..62d6573 100644
--- a/drivers/net/wireless/ti/wlcore/io.c
+++ b/drivers/net/wireless/ti/wlcore/io.c
@@ -48,6 +48,12 @@ void wlcore_disable_interrupts(struct wl1271 *wl)
 }
 EXPORT_SYMBOL_GPL(wlcore_disable_interrupts);
 
+void wlcore_disable_interrupts_nosync(struct wl1271 *wl)
+{
+	disable_irq_nosync(wl->irq);
+}
+EXPORT_SYMBOL_GPL(wlcore_disable_interrupts_nosync);
+
 void wlcore_enable_interrupts(struct wl1271 *wl)
 {
 	enable_irq(wl->irq);
diff --git a/drivers/net/wireless/ti/wlcore/io.h b/drivers/net/wireless/ti/wlcore/io.h
index 404cb14..bbaf711 100644
--- a/drivers/net/wireless/ti/wlcore/io.h
+++ b/drivers/net/wireless/ti/wlcore/io.h
@@ -45,6 +45,7 @@
 struct wl1271;
 
 void wlcore_disable_interrupts(struct wl1271 *wl);
+void wlcore_disable_interrupts_nosync(struct wl1271 *wl);
 void wlcore_enable_interrupts(struct wl1271 *wl);
 
 void wl1271_io_reset(struct wl1271 *wl);
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 78edc58..c94351a 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -743,8 +743,11 @@ out:
 
 void wl12xx_queue_recovery_work(struct wl1271 *wl)
 {
-	if (!test_bit(WL1271_FLAG_RECOVERY_IN_PROGRESS, &wl->flags))
+	/* Avoid a recursive recovery */
+	if (!test_and_set_bit(WL1271_FLAG_RECOVERY_IN_PROGRESS, &wl->flags)) {
+		wlcore_disable_interrupts_nosync(wl);
 		ieee80211_queue_work(wl->hw, &wl->recovery_work);
+	}
 }
 
 size_t wl12xx_copy_fwlog(struct wl1271 *wl, u8 *memblock, size_t maxlen)
@@ -848,9 +851,6 @@ static void wl1271_recovery_work(struct work_struct *work)
 	if (wl->state != WL1271_STATE_ON || wl->plt)
 		goto out_unlock;
 
-	/* Avoid a recursive recovery */
-	set_bit(WL1271_FLAG_RECOVERY_IN_PROGRESS, &wl->flags);
-
 	wl12xx_read_fwlog_panic(wl);
 
 	/* change partitions momentarily so we can read the FW pc */
@@ -902,8 +902,6 @@ static void wl1271_recovery_work(struct work_struct *work)
 	mutex_unlock(&wl->mutex);
 	wl1271_op_stop(wl->hw);
 
-	clear_bit(WL1271_FLAG_RECOVERY_IN_PROGRESS, &wl->flags);
-
 	ieee80211_restart_hw(wl->hw);
 
 	/*
@@ -1706,6 +1704,10 @@ static void wl1271_op_stop(struct ieee80211_hw *hw)
 	wlcore_disable_interrupts(wl);
 	mutex_lock(&wl->mutex);
 	if (wl->state == WL1271_STATE_OFF) {
+		if (test_and_clear_bit(WL1271_FLAG_RECOVERY_IN_PROGRESS,
+					&wl->flags))
+			wlcore_enable_interrupts(wl);
+
 		mutex_unlock(&wl->mutex);
 
 		/*
@@ -1737,6 +1739,13 @@ static void wl1271_op_stop(struct ieee80211_hw *hw)
 	mutex_lock(&wl->mutex);
 
 	wl1271_power_off(wl);
+	/*
+	 * In case a recovery was scheduled, interrupts were disabled to avoid
+	 * an interrupt storm. Now that the power is down, it is safe to
+	 * re-enable interrupts to balance the disable depth
+	 */
+	if (test_and_clear_bit(WL1271_FLAG_RECOVERY_IN_PROGRESS, &wl->flags))
+		wlcore_enable_interrupts(wl);
 
 	wl->band = IEEE80211_BAND_2GHZ;
 
-- 
cgit v1.1


From 02eb1d9d3bc307e2b540b8c095fa19342789f86d Mon Sep 17 00:00:00 2001
From: Ido Yariv <ido@wizery.com>
Date: Sun, 17 Jun 2012 20:30:05 +0300
Subject: wlcore: Change read/write ops to return errors

While bus operations may fail, either due to HW or FW issues, these are
never propagated to higher layers. As a result, the core driver has no
way of knowing that the operations failed, and will only recover if high
level logic requires it (e.g. no command completion).

Change read/write bus operations to return errors to let higher layer
functionality handle these.

Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/sdio.c     | 16 ++++++++++------
 drivers/net/wireless/ti/wlcore/spi.c      | 14 +++++++++-----
 drivers/net/wireless/ti/wlcore/wlcore_i.h |  6 +++---
 3 files changed, 22 insertions(+), 14 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c
index 4edaa20..9069dc9 100644
--- a/drivers/net/wireless/ti/wlcore/sdio.c
+++ b/drivers/net/wireless/ti/wlcore/sdio.c
@@ -71,8 +71,8 @@ static void wl1271_sdio_set_block_size(struct device *child,
 	sdio_release_host(func);
 }
 
-static void wl12xx_sdio_raw_read(struct device *child, int addr, void *buf,
-				 size_t len, bool fixed)
+static int wl12xx_sdio_raw_read(struct device *child, int addr, void *buf,
+				size_t len, bool fixed)
 {
 	int ret;
 	struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent);
@@ -103,12 +103,14 @@ static void wl12xx_sdio_raw_read(struct device *child, int addr, void *buf,
 
 	sdio_release_host(func);
 
-	if (ret)
+	if (WARN_ON(ret))
 		dev_err(child->parent, "sdio read failed (%d)\n", ret);
+
+	return ret;
 }
 
-static void wl12xx_sdio_raw_write(struct device *child, int addr, void *buf,
-				  size_t len, bool fixed)
+static int wl12xx_sdio_raw_write(struct device *child, int addr, void *buf,
+				 size_t len, bool fixed)
 {
 	int ret;
 	struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent);
@@ -139,8 +141,10 @@ static void wl12xx_sdio_raw_write(struct device *child, int addr, void *buf,
 
 	sdio_release_host(func);
 
-	if (ret)
+	if (WARN_ON(ret))
 		dev_err(child->parent, "sdio write failed (%d)\n", ret);
+
+	return ret;
 }
 
 static int wl12xx_sdio_power_on(struct wl12xx_sdio_glue *glue)
diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c
index 553cd3c..d6768e9 100644
--- a/drivers/net/wireless/ti/wlcore/spi.c
+++ b/drivers/net/wireless/ti/wlcore/spi.c
@@ -193,8 +193,8 @@ static int wl12xx_spi_read_busy(struct device *child)
 	return -ETIMEDOUT;
 }
 
-static void wl12xx_spi_raw_read(struct device *child, int addr, void *buf,
-				size_t len, bool fixed)
+static int wl12xx_spi_raw_read(struct device *child, int addr, void *buf,
+			       size_t len, bool fixed)
 {
 	struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
 	struct wl1271 *wl = dev_get_drvdata(child);
@@ -238,7 +238,7 @@ static void wl12xx_spi_raw_read(struct device *child, int addr, void *buf,
 		if (!(busy_buf[WL1271_BUSY_WORD_CNT - 1] & 0x1) &&
 		    wl12xx_spi_read_busy(child)) {
 			memset(buf, 0, chunk_len);
-			return;
+			return 0;
 		}
 
 		spi_message_init(&m);
@@ -256,10 +256,12 @@ static void wl12xx_spi_raw_read(struct device *child, int addr, void *buf,
 		buf += chunk_len;
 		len -= chunk_len;
 	}
+
+	return 0;
 }
 
-static void wl12xx_spi_raw_write(struct device *child, int addr, void *buf,
-				 size_t len, bool fixed)
+static int wl12xx_spi_raw_write(struct device *child, int addr, void *buf,
+				size_t len, bool fixed)
 {
 	struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
 	struct spi_transfer t[2 * WSPI_MAX_NUM_OF_CHUNKS];
@@ -304,6 +306,8 @@ static void wl12xx_spi_raw_write(struct device *child, int addr, void *buf,
 	}
 
 	spi_sync(to_spi_device(glue->dev), &m);
+
+	return 0;
 }
 
 static struct wl1271_if_operations spi_ops = {
diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h
index 8260b1e..5ab31ff 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore_i.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h
@@ -209,9 +209,9 @@ struct wl1271_scan {
 };
 
 struct wl1271_if_operations {
-	void (*read)(struct device *child, int addr, void *buf, size_t len,
-		     bool fixed);
-	void (*write)(struct device *child, int addr, void *buf, size_t len,
+	int (*read)(struct device *child, int addr, void *buf, size_t len,
+		    bool fixed);
+	int (*write)(struct device *child, int addr, void *buf, size_t len,
 		     bool fixed);
 	void (*reset)(struct device *child);
 	void (*init)(struct device *child);
-- 
cgit v1.1


From 0c2a6ce04eb4d742170a4ddfeb57263fb7964698 Mon Sep 17 00:00:00 2001
From: Ido Yariv <ido@wizery.com>
Date: Sun, 17 Jun 2012 21:29:51 +0300
Subject: wlcore: Change raw io functions to return errors

Make wl1271_raw_write and wl1271_raw_read return errors so the driver
could handle these appropriately.
Since the prototype has changed, also rename the prefix of these
functions to wlcore.

Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/io.h | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/io.h b/drivers/net/wireless/ti/wlcore/io.h
index bbaf711..60b9503 100644
--- a/drivers/net/wireless/ti/wlcore/io.h
+++ b/drivers/net/wireless/ti/wlcore/io.h
@@ -53,33 +53,33 @@ void wl1271_io_init(struct wl1271 *wl);
 int wlcore_translate_addr(struct wl1271 *wl, int addr);
 
 /* Raw target IO, address is not translated */
-static inline void wl1271_raw_write(struct wl1271 *wl, int addr, void *buf,
-				    size_t len, bool fixed)
+static inline int wlcore_raw_write(struct wl1271 *wl, int addr, void *buf,
+				   size_t len, bool fixed)
 {
-	wl->if_ops->write(wl->dev, addr, buf, len, fixed);
+	return wl->if_ops->write(wl->dev, addr, buf, len, fixed);
 }
 
-static inline void wl1271_raw_read(struct wl1271 *wl, int addr, void *buf,
-				   size_t len, bool fixed)
+static inline int wlcore_raw_read(struct wl1271 *wl, int addr, void *buf,
+				  size_t len, bool fixed)
 {
-	wl->if_ops->read(wl->dev, addr, buf, len, fixed);
+	return wl->if_ops->read(wl->dev, addr, buf, len, fixed);
 }
 
 static inline void wlcore_raw_read_data(struct wl1271 *wl, int reg, void *buf,
 					size_t len, bool fixed)
 {
-	wl1271_raw_read(wl, wl->rtable[reg], buf, len, fixed);
+	wlcore_raw_read(wl, wl->rtable[reg], buf, len, fixed);
 }
 
 static inline void wlcore_raw_write_data(struct wl1271 *wl, int reg, void *buf,
 					 size_t len, bool fixed)
 {
-	wl1271_raw_write(wl, wl->rtable[reg], buf, len, fixed);
+	wlcore_raw_write(wl, wl->rtable[reg], buf, len, fixed);
 }
 
 static inline u32 wl1271_raw_read32(struct wl1271 *wl, int addr)
 {
-	wl1271_raw_read(wl, addr, &wl->buffer_32,
+	wlcore_raw_read(wl, addr, &wl->buffer_32,
 			    sizeof(wl->buffer_32), false);
 
 	return le32_to_cpu(wl->buffer_32);
@@ -88,7 +88,7 @@ static inline u32 wl1271_raw_read32(struct wl1271 *wl, int addr)
 static inline void wl1271_raw_write32(struct wl1271 *wl, int addr, u32 val)
 {
 	wl->buffer_32 = cpu_to_le32(val);
-	wl1271_raw_write(wl, addr, &wl->buffer_32,
+	wlcore_raw_write(wl, addr, &wl->buffer_32,
 			     sizeof(wl->buffer_32), false);
 }
 
@@ -99,7 +99,7 @@ static inline void wl1271_read(struct wl1271 *wl, int addr, void *buf,
 
 	physical = wlcore_translate_addr(wl, addr);
 
-	wl1271_raw_read(wl, physical, buf, len, fixed);
+	wlcore_raw_read(wl, physical, buf, len, fixed);
 }
 
 static inline void wl1271_write(struct wl1271 *wl, int addr, void *buf,
@@ -109,7 +109,7 @@ static inline void wl1271_write(struct wl1271 *wl, int addr, void *buf,
 
 	physical = wlcore_translate_addr(wl, addr);
 
-	wl1271_raw_write(wl, physical, buf, len, fixed);
+	wlcore_raw_write(wl, physical, buf, len, fixed);
 }
 
 static inline void wlcore_write_data(struct wl1271 *wl, int reg, void *buf,
@@ -135,7 +135,7 @@ static inline void wl1271_read_hwaddr(struct wl1271 *wl, int hwaddr,
 
 	physical = wlcore_translate_addr(wl, addr);
 
-	wl1271_raw_read(wl, physical, buf, len, fixed);
+	wlcore_raw_read(wl, physical, buf, len, fixed);
 }
 
 static inline u32 wl1271_read32(struct wl1271 *wl, int addr)
-- 
cgit v1.1


From 8b7c0fc3569693c3a68103b7d5a7dad5b84109bc Mon Sep 17 00:00:00 2001
From: Ido Yariv <ido@wizery.com>
Date: Sun, 17 Jun 2012 21:59:42 +0300
Subject: wlcore: Propagate errors from wlcore_raw_*_data functions

wlcore_raw_read_data is called when the FW status is read which happens
while handling interrupts and when the FW log is read following a
recovery. Request a recovery in the former case, and don't read the FW
log in case the FW status read failed.

Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/io.h   | 12 ++++++------
 drivers/net/wireless/ti/wlcore/main.c | 27 ++++++++++++++++++++-------
 2 files changed, 26 insertions(+), 13 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/io.h b/drivers/net/wireless/ti/wlcore/io.h
index 60b9503..2713ce1 100644
--- a/drivers/net/wireless/ti/wlcore/io.h
+++ b/drivers/net/wireless/ti/wlcore/io.h
@@ -65,16 +65,16 @@ static inline int wlcore_raw_read(struct wl1271 *wl, int addr, void *buf,
 	return wl->if_ops->read(wl->dev, addr, buf, len, fixed);
 }
 
-static inline void wlcore_raw_read_data(struct wl1271 *wl, int reg, void *buf,
-					size_t len, bool fixed)
+static inline int wlcore_raw_read_data(struct wl1271 *wl, int reg, void *buf,
+				       size_t len, bool fixed)
 {
-	wlcore_raw_read(wl, wl->rtable[reg], buf, len, fixed);
+	return wlcore_raw_read(wl, wl->rtable[reg], buf, len, fixed);
 }
 
-static inline void wlcore_raw_write_data(struct wl1271 *wl, int reg, void *buf,
-					 size_t len, bool fixed)
+static inline int wlcore_raw_write_data(struct wl1271 *wl, int reg, void *buf,
+					size_t len, bool fixed)
 {
-	wlcore_raw_write(wl, wl->rtable[reg], buf, len, fixed);
+	return wlcore_raw_write(wl, wl->rtable[reg], buf, len, fixed);
 }
 
 static inline u32 wl1271_raw_read32(struct wl1271 *wl, int addr)
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index c94351a..085cd17 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -378,9 +378,9 @@ static void wl12xx_irq_update_links_status(struct wl1271 *wl,
 	}
 }
 
-static void wl12xx_fw_status(struct wl1271 *wl,
-			     struct wl_fw_status_1 *status_1,
-			     struct wl_fw_status_2 *status_2)
+static int wlcore_fw_status(struct wl1271 *wl,
+			    struct wl_fw_status_1 *status_1,
+			    struct wl_fw_status_2 *status_2)
 {
 	struct wl12xx_vif *wlvif;
 	struct timespec ts;
@@ -388,12 +388,15 @@ static void wl12xx_fw_status(struct wl1271 *wl,
 	int avail, freed_blocks;
 	int i;
 	size_t status_len;
+	int ret;
 
 	status_len = WLCORE_FW_STATUS_1_LEN(wl->num_rx_desc) +
 		sizeof(*status_2) + wl->fw_status_priv_len;
 
-	wlcore_raw_read_data(wl, REG_RAW_FW_STATUS_ADDR, status_1,
-			     status_len, false);
+	ret = wlcore_raw_read_data(wl, REG_RAW_FW_STATUS_ADDR, status_1,
+				   status_len, false);
+	if (ret < 0)
+		return ret;
 
 	wl1271_debug(DEBUG_IRQ, "intr: 0x%x (fw_rx_counter = %d, "
 		     "drv_rx_counter = %d, tx_results_counter = %d)",
@@ -462,6 +465,8 @@ static void wl12xx_fw_status(struct wl1271 *wl,
 	getnstimeofday(&ts);
 	wl->time_offset = (timespec_to_ns(&ts) >> 10) -
 		(s64)le32_to_cpu(status_2->fw_localtime);
+
+	return 0;
 }
 
 static void wl1271_flush_deferred_work(struct wl1271 *wl)
@@ -530,7 +535,11 @@ static irqreturn_t wl1271_irq(int irq, void *cookie)
 		clear_bit(WL1271_FLAG_IRQ_RUNNING, &wl->flags);
 		smp_mb__after_clear_bit();
 
-		wl12xx_fw_status(wl, wl->fw_status_1, wl->fw_status_2);
+		ret = wlcore_fw_status(wl, wl->fw_status_1, wl->fw_status_2);
+		if (ret < 0) {
+			wl12xx_queue_recovery_work(wl);
+			goto out;
+		}
 
 		wlcore_hw_tx_immediate_compl(wl);
 
@@ -781,6 +790,7 @@ static void wl12xx_read_fwlog_panic(struct wl1271 *wl)
 	u32 offset;
 	u32 end_of_log;
 	u8 *block;
+	int ret;
 
 	if ((wl->quirks & WLCORE_QUIRK_FWLOG_NOT_IMPLEMENTED) ||
 	    (wl->conf.fwlog.mem_blocks == 0))
@@ -802,7 +812,10 @@ static void wl12xx_read_fwlog_panic(struct wl1271 *wl)
 		wl12xx_cmd_stop_fwlog(wl);
 
 	/* Read the first memory block address */
-	wl12xx_fw_status(wl, wl->fw_status_1, wl->fw_status_2);
+	ret = wlcore_fw_status(wl, wl->fw_status_1, wl->fw_status_2);
+	if (ret < 0)
+		goto out;
+
 	addr = le32_to_cpu(wl->fw_status_2->log_start_addr);
 	if (!addr)
 		goto out;
-- 
cgit v1.1


From 045b9b5f4172b2b21af0b9bf5e6dda51146d51a4 Mon Sep 17 00:00:00 2001
From: Ido Yariv <ido@wizery.com>
Date: Mon, 18 Jun 2012 12:31:16 +0300
Subject: wlcore: Propagate errors from wl1271_read

Propagate errors from wl1271_read and request for recovery when
appropriate.
Also rename prefixes of wlcore functions which their prototypes had to
be changed.

Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wl12xx/main.c   |  6 +++---
 drivers/net/wireless/ti/wlcore/boot.c   |  4 +++-
 drivers/net/wireless/ti/wlcore/cmd.c    | 20 +++++++++++++++-----
 drivers/net/wireless/ti/wlcore/event.c  |  6 ++++--
 drivers/net/wireless/ti/wlcore/hw_ops.h |  6 ++++--
 drivers/net/wireless/ti/wlcore/io.h     | 10 +++++-----
 drivers/net/wireless/ti/wlcore/main.c   | 24 ++++++++++++++++++++----
 drivers/net/wireless/ti/wlcore/rx.c     | 13 ++++++++++---
 drivers/net/wireless/ti/wlcore/rx.h     |  2 +-
 drivers/net/wireless/ti/wlcore/tx.c     | 15 +++++++++++----
 drivers/net/wireless/ti/wlcore/tx.h     |  2 +-
 drivers/net/wireless/ti/wlcore/wlcore.h |  2 +-
 12 files changed, 78 insertions(+), 32 deletions(-)

diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index 0d2fdca..916cee7 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -1162,13 +1162,13 @@ static u32 wl12xx_get_rx_packet_len(struct wl1271 *wl, void *rx_data,
 	return data_len - sizeof(*desc) - desc->pad_len;
 }
 
-static void wl12xx_tx_delayed_compl(struct wl1271 *wl)
+static int wl12xx_tx_delayed_compl(struct wl1271 *wl)
 {
 	if (wl->fw_status_1->tx_results_counter ==
 	    (wl->tx_results_count & 0xff))
-		return;
+		return 0;
 
-	wl1271_tx_complete(wl);
+	return wlcore_tx_complete(wl);
 }
 
 static int wl12xx_hw_init(struct wl1271 *wl)
diff --git a/drivers/net/wireless/ti/wlcore/boot.c b/drivers/net/wireless/ti/wlcore/boot.c
index 0fda500..d7abc50 100644
--- a/drivers/net/wireless/ti/wlcore/boot.c
+++ b/drivers/net/wireless/ti/wlcore/boot.c
@@ -87,7 +87,9 @@ static int wlcore_boot_static_data(struct wl1271 *wl)
 		goto out;
 	}
 
-	wl1271_read(wl, wl->cmd_box_addr, static_data, len, false);
+	ret = wlcore_read(wl, wl->cmd_box_addr, static_data, len, false);
+	if (ret < 0)
+		goto out_free;
 
 	ret = wlcore_boot_parse_fw_ver(wl, static_data);
 	if (ret < 0)
diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c
index 885364c..69f27d1 100644
--- a/drivers/net/wireless/ti/wlcore/cmd.c
+++ b/drivers/net/wireless/ti/wlcore/cmd.c
@@ -95,7 +95,10 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
 	/* read back the status code of the command */
 	if (res_len == 0)
 		res_len = sizeof(struct wl1271_cmd_header);
-	wl1271_read(wl, wl->cmd_box_addr, cmd, res_len, false);
+
+	ret = wlcore_read(wl, wl->cmd_box_addr, cmd, res_len, false);
+	if (ret < 0)
+		goto fail;
 
 	status = le16_to_cpu(cmd->status);
 	if (status != CMD_STATUS_SUCCESS) {
@@ -141,11 +144,18 @@ static int wl1271_cmd_wait_for_event_or_timeout(struct wl1271 *wl, u32 mask)
 		msleep(1);
 
 		/* read from both event fields */
-		wl1271_read(wl, wl->mbox_ptr[0], events_vector,
-			    sizeof(*events_vector), false);
+		ret = wlcore_read(wl, wl->mbox_ptr[0], events_vector,
+				  sizeof(*events_vector), false);
+		if (ret < 0)
+			goto out;
+
 		event = *events_vector & mask;
-		wl1271_read(wl, wl->mbox_ptr[1], events_vector,
-			    sizeof(*events_vector), false);
+
+		ret = wlcore_read(wl, wl->mbox_ptr[1], events_vector,
+				  sizeof(*events_vector), false);
+		if (ret < 0)
+			goto out;
+
 		event |= *events_vector & mask;
 	} while (!event);
 
diff --git a/drivers/net/wireless/ti/wlcore/event.c b/drivers/net/wireless/ti/wlcore/event.c
index c976f04..858ac33 100644
--- a/drivers/net/wireless/ti/wlcore/event.c
+++ b/drivers/net/wireless/ti/wlcore/event.c
@@ -301,8 +301,10 @@ int wl1271_event_handle(struct wl1271 *wl, u8 mbox_num)
 		return -EINVAL;
 
 	/* first we read the mbox descriptor */
-	wl1271_read(wl, wl->mbox_ptr[mbox_num], wl->mbox,
-		    sizeof(*wl->mbox), false);
+	ret = wlcore_read(wl, wl->mbox_ptr[mbox_num], wl->mbox,
+			  sizeof(*wl->mbox), false);
+	if (ret < 0)
+		return ret;
 
 	/* process the descriptor */
 	ret = wl1271_event_process(wl);
diff --git a/drivers/net/wireless/ti/wlcore/hw_ops.h b/drivers/net/wireless/ti/wlcore/hw_ops.h
index 9e7787b..f44d586 100644
--- a/drivers/net/wireless/ti/wlcore/hw_ops.h
+++ b/drivers/net/wireless/ti/wlcore/hw_ops.h
@@ -81,10 +81,12 @@ wlcore_hw_get_rx_packet_len(struct wl1271 *wl, void *rx_data, u32 data_len)
 	return wl->ops->get_rx_packet_len(wl, rx_data, data_len);
 }
 
-static inline void wlcore_hw_tx_delayed_compl(struct wl1271 *wl)
+static inline int wlcore_hw_tx_delayed_compl(struct wl1271 *wl)
 {
 	if (wl->ops->tx_delayed_compl)
-		wl->ops->tx_delayed_compl(wl);
+		return wl->ops->tx_delayed_compl(wl);
+
+	return 0;
 }
 
 static inline void wlcore_hw_tx_immediate_compl(struct wl1271 *wl)
diff --git a/drivers/net/wireless/ti/wlcore/io.h b/drivers/net/wireless/ti/wlcore/io.h
index 2713ce1..d114bb4 100644
--- a/drivers/net/wireless/ti/wlcore/io.h
+++ b/drivers/net/wireless/ti/wlcore/io.h
@@ -92,14 +92,14 @@ static inline void wl1271_raw_write32(struct wl1271 *wl, int addr, u32 val)
 			     sizeof(wl->buffer_32), false);
 }
 
-static inline void wl1271_read(struct wl1271 *wl, int addr, void *buf,
-			       size_t len, bool fixed)
+static inline int wlcore_read(struct wl1271 *wl, int addr, void *buf,
+			      size_t len, bool fixed)
 {
 	int physical;
 
 	physical = wlcore_translate_addr(wl, addr);
 
-	wlcore_raw_read(wl, physical, buf, len, fixed);
+	return wlcore_raw_read(wl, physical, buf, len, fixed);
 }
 
 static inline void wl1271_write(struct wl1271 *wl, int addr, void *buf,
@@ -118,10 +118,10 @@ static inline void wlcore_write_data(struct wl1271 *wl, int reg, void *buf,
 	wl1271_write(wl, wl->rtable[reg], buf, len, fixed);
 }
 
-static inline void wlcore_read_data(struct wl1271 *wl, int reg, void *buf,
+static inline int wlcore_read_data(struct wl1271 *wl, int reg, void *buf,
 				    size_t len, bool fixed)
 {
-	wl1271_read(wl, wl->rtable[reg], buf, len, fixed);
+	return wlcore_read(wl, wl->rtable[reg], buf, len, fixed);
 }
 
 static inline void wl1271_read_hwaddr(struct wl1271 *wl, int hwaddr,
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 085cd17..deb22f8 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -572,7 +572,11 @@ static irqreturn_t wl1271_irq(int irq, void *cookie)
 		if (likely(intr & WL1271_ACX_INTR_DATA)) {
 			wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_DATA");
 
-			wl12xx_rx(wl, wl->fw_status_1);
+			ret = wlcore_rx(wl, wl->fw_status_1);
+			if (ret < 0) {
+				wl12xx_queue_recovery_work(wl);
+				goto out;
+			}
 
 			/* Check if any tx blocks were freed */
 			spin_lock_irqsave(&wl->wl_lock, flags);
@@ -589,7 +593,11 @@ static irqreturn_t wl1271_irq(int irq, void *cookie)
 			}
 
 			/* check for tx results */
-			wlcore_hw_tx_delayed_compl(wl);
+			ret = wlcore_hw_tx_delayed_compl(wl);
+			if (ret < 0) {
+				wl12xx_queue_recovery_work(wl);
+				goto out;
+			}
 
 			/* Make sure the deferred queues don't get too long */
 			defer_count = skb_queue_len(&wl->deferred_tx_queue) +
@@ -600,12 +608,20 @@ static irqreturn_t wl1271_irq(int irq, void *cookie)
 
 		if (intr & WL1271_ACX_INTR_EVENT_A) {
 			wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_EVENT_A");
-			wl1271_event_handle(wl, 0);
+			ret = wl1271_event_handle(wl, 0);
+			if (ret < 0) {
+				wl12xx_queue_recovery_work(wl);
+				goto out;
+			}
 		}
 
 		if (intr & WL1271_ACX_INTR_EVENT_B) {
 			wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_EVENT_B");
-			wl1271_event_handle(wl, 1);
+			ret = wl1271_event_handle(wl, 1);
+			if (ret < 0) {
+				wl12xx_queue_recovery_work(wl);
+				goto out;
+			}
 		}
 
 		if (intr & WL1271_ACX_INTR_INIT_COMPLETE)
diff --git a/drivers/net/wireless/ti/wlcore/rx.c b/drivers/net/wireless/ti/wlcore/rx.c
index a1db4e0..59d0956 100644
--- a/drivers/net/wireless/ti/wlcore/rx.c
+++ b/drivers/net/wireless/ti/wlcore/rx.c
@@ -200,7 +200,7 @@ static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length,
 	return is_data;
 }
 
-void wl12xx_rx(struct wl1271 *wl, struct wl_fw_status_1 *status)
+int wlcore_rx(struct wl1271 *wl, struct wl_fw_status_1 *status)
 {
 	unsigned long active_hlids[BITS_TO_LONGS(WL12XX_MAX_LINKS)] = {0};
 	u32 buf_size;
@@ -211,6 +211,7 @@ void wl12xx_rx(struct wl1271 *wl, struct wl_fw_status_1 *status)
 	u32 pkt_offset, des;
 	u8 hlid;
 	enum wl_rx_buf_align rx_align;
+	int ret = 0;
 
 	while (drv_rx_counter != fw_rx_counter) {
 		buf_size = 0;
@@ -235,8 +236,11 @@ void wl12xx_rx(struct wl1271 *wl, struct wl_fw_status_1 *status)
 		/* Read all available packets at once */
 		des = le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]);
 		wlcore_hw_prepare_read(wl, des, buf_size);
-		wlcore_read_data(wl, REG_SLV_MEM_DATA, wl->aggr_buf,
-				 buf_size, true);
+
+		ret = wlcore_read_data(wl, REG_SLV_MEM_DATA, wl->aggr_buf,
+				       buf_size, true);
+		if (ret < 0)
+			goto out;
 
 		/* Split data into separate packets */
 		pkt_offset = 0;
@@ -278,6 +282,9 @@ void wl12xx_rx(struct wl1271 *wl, struct wl_fw_status_1 *status)
 			       wl->rx_counter);
 
 	wl12xx_rearm_rx_streaming(wl, active_hlids);
+
+out:
+	return ret;
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/net/wireless/ti/wlcore/rx.h b/drivers/net/wireless/ti/wlcore/rx.h
index 4324a42..79f7839 100644
--- a/drivers/net/wireless/ti/wlcore/rx.h
+++ b/drivers/net/wireless/ti/wlcore/rx.h
@@ -143,7 +143,7 @@ struct wl1271_rx_descriptor {
 	u8  reserved;
 } __packed;
 
-void wl12xx_rx(struct wl1271 *wl, struct wl_fw_status_1 *status);
+int wlcore_rx(struct wl1271 *wl, struct wl_fw_status_1 *status);
 u8 wl1271_rate_to_idx(int rate, enum ieee80211_band band);
 int wl1271_rx_filter_enable(struct wl1271 *wl,
 			    int index, bool enable,
diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c
index 8ee82b9..fc890cb 100644
--- a/drivers/net/wireless/ti/wlcore/tx.c
+++ b/drivers/net/wireless/ti/wlcore/tx.c
@@ -881,16 +881,20 @@ static void wl1271_tx_complete_packet(struct wl1271 *wl,
 }
 
 /* Called upon reception of a TX complete interrupt */
-void wl1271_tx_complete(struct wl1271 *wl)
+int wlcore_tx_complete(struct wl1271 *wl)
 {
 	struct wl1271_acx_mem_map *memmap =
 		(struct wl1271_acx_mem_map *)wl->target_mem_map;
 	u32 count, fw_counter;
 	u32 i;
+	int ret;
 
 	/* read the tx results from the chipset */
-	wl1271_read(wl, le32_to_cpu(memmap->tx_result),
-		    wl->tx_res_if, sizeof(*wl->tx_res_if), false);
+	ret = wlcore_read(wl, le32_to_cpu(memmap->tx_result),
+			  wl->tx_res_if, sizeof(*wl->tx_res_if), false);
+	if (ret < 0)
+		goto out;
+
 	fw_counter = le32_to_cpu(wl->tx_res_if->tx_result_fw_counter);
 
 	/* write host counter to chipset (to ack) */
@@ -916,8 +920,11 @@ void wl1271_tx_complete(struct wl1271 *wl)
 
 		wl->tx_results_count++;
 	}
+
+out:
+	return ret;
 }
-EXPORT_SYMBOL(wl1271_tx_complete);
+EXPORT_SYMBOL(wlcore_tx_complete);
 
 void wl1271_tx_reset_link_queues(struct wl1271 *wl, u8 hlid)
 {
diff --git a/drivers/net/wireless/ti/wlcore/tx.h b/drivers/net/wireless/ti/wlcore/tx.h
index fa4be1b..1054094 100644
--- a/drivers/net/wireless/ti/wlcore/tx.h
+++ b/drivers/net/wireless/ti/wlcore/tx.h
@@ -235,7 +235,7 @@ static inline int wl1271_tx_total_queue_count(struct wl1271 *wl)
 
 void wl1271_tx_work(struct work_struct *work);
 void wl1271_tx_work_locked(struct wl1271 *wl);
-void wl1271_tx_complete(struct wl1271 *wl);
+int wlcore_tx_complete(struct wl1271 *wl);
 void wl12xx_tx_reset_wlvif(struct wl1271 *wl, struct wl12xx_vif *wlvif);
 void wl12xx_tx_reset(struct wl1271 *wl);
 void wl1271_tx_flush(struct wl1271 *wl);
diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h
index 205d8ad..fd37307 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -56,7 +56,7 @@ struct wlcore_ops {
 	void (*prepare_read)(struct wl1271 *wl, u32 rx_desc, u32 len);
 	u32 (*get_rx_packet_len)(struct wl1271 *wl, void *rx_data,
 				 u32 data_len);
-	void (*tx_delayed_compl)(struct wl1271 *wl);
+	int (*tx_delayed_compl)(struct wl1271 *wl);
 	void (*tx_immediate_compl)(struct wl1271 *wl);
 	int (*hw_init)(struct wl1271 *wl);
 	int (*init_vif)(struct wl1271 *wl, struct wl12xx_vif *wlvif);
-- 
cgit v1.1


From eb96f841b9563ba34969be25615548635728faf5 Mon Sep 17 00:00:00 2001
From: Ido Yariv <ido@wizery.com>
Date: Mon, 18 Jun 2012 13:21:55 +0300
Subject: wlcore: Propagate errors from wl1271_write

Propagate errors from wl1271_write and request for recovery when
appropriate.
Also rename prefixes of wlcore functions which their prototypes had to
be changed.

Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wl12xx/main.c   | 23 ++++++++++++++++++-----
 drivers/net/wireless/ti/wl18xx/main.c   | 19 ++++++++++++-------
 drivers/net/wireless/ti/wlcore/boot.c   | 17 +++++++++++------
 drivers/net/wireless/ti/wlcore/cmd.c    | 12 +++++++++---
 drivers/net/wireless/ti/wlcore/event.c  |  5 ++++-
 drivers/net/wireless/ti/wlcore/hw_ops.h |  6 ++++--
 drivers/net/wireless/ti/wlcore/io.h     | 12 ++++++------
 drivers/net/wireless/ti/wlcore/main.c   | 13 ++++++++++---
 drivers/net/wireless/ti/wlcore/rx.c     |  4 +++-
 drivers/net/wireless/ti/wlcore/tx.c     | 29 +++++++++++++++++++++--------
 drivers/net/wireless/ti/wlcore/tx.h     |  2 +-
 drivers/net/wireless/ti/wlcore/wlcore.h |  6 +++---
 12 files changed, 102 insertions(+), 46 deletions(-)

diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index 916cee7..257745f 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -598,8 +598,10 @@ static const int wl12xx_rtable[REG_TABLE_LEN] = {
 #define WL128X_FW_NAME_SINGLE	"ti-connectivity/wl128x-fw-4-sr.bin"
 #define WL128X_PLT_FW_NAME	"ti-connectivity/wl128x-fw-4-plt.bin"
 
-static void wl127x_prepare_read(struct wl1271 *wl, u32 rx_desc, u32 len)
+static int wl127x_prepare_read(struct wl1271 *wl, u32 rx_desc, u32 len)
 {
+	int ret;
+
 	if (wl->chip.id != CHIP_ID_1283_PG20) {
 		struct wl1271_acx_mem_map *wl_mem_map = wl->target_mem_map;
 		struct wl127x_rx_mem_pool_addr rx_mem_addr;
@@ -616,9 +618,13 @@ static void wl127x_prepare_read(struct wl1271 *wl, u32 rx_desc, u32 len)
 
 		rx_mem_addr.addr_extra = rx_mem_addr.addr + 4;
 
-		wl1271_write(wl, WL1271_SLV_REG_DATA,
-			     &rx_mem_addr, sizeof(rx_mem_addr), false);
+		ret = wlcore_write(wl, WL1271_SLV_REG_DATA, &rx_mem_addr,
+				   sizeof(rx_mem_addr), false);
+		if (ret < 0)
+			return ret;
 	}
+
+	return 0;
 }
 
 static int wl12xx_identify_chip(struct wl1271 *wl)
@@ -1073,11 +1079,18 @@ out:
 	return ret;
 }
 
-static void wl12xx_trigger_cmd(struct wl1271 *wl, int cmd_box_addr,
+static int wl12xx_trigger_cmd(struct wl1271 *wl, int cmd_box_addr,
 			       void *buf, size_t len)
 {
-	wl1271_write(wl, cmd_box_addr, buf, len, false);
+	int ret;
+
+	ret = wlcore_write(wl, cmd_box_addr, buf, len, false);
+	if (ret < 0)
+		return ret;
+
 	wlcore_write_reg(wl, REG_INTERRUPT_TRIG, WL12XX_INTR_TRIG_CMD);
+
+	return ret;
 }
 
 static void wl12xx_ack_event(struct wl1271 *wl)
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index 271ff81..974a6ff 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -720,10 +720,11 @@ static void wl18xx_pre_upload(struct wl1271 *wl)
 	tmp = wl1271_read32(wl, WL18XX_SCR_PAD2);
 }
 
-static void wl18xx_set_mac_and_phy(struct wl1271 *wl)
+static int wl18xx_set_mac_and_phy(struct wl1271 *wl)
 {
 	struct wl18xx_priv *priv = wl->priv;
 	size_t len;
+	int ret;
 
 	/* the parameters struct is smaller for PG1 */
 	if (wl->chip.id == CHIP_ID_185x_PG10)
@@ -732,8 +733,10 @@ static void wl18xx_set_mac_and_phy(struct wl1271 *wl)
 		len = sizeof(struct wl18xx_mac_and_phy_params);
 
 	wlcore_set_partition(wl, &wl->ptable[PART_PHY_INIT]);
-	wl1271_write(wl, WL18XX_PHY_INIT_MEM_ADDR, (u8 *)&priv->conf.phy, len,
-		     false);
+	ret = wlcore_write(wl, WL18XX_PHY_INIT_MEM_ADDR, (u8 *)&priv->conf.phy,
+			   len, false);
+
+	return ret;
 }
 
 static void wl18xx_enable_interrupts(struct wl1271 *wl)
@@ -769,7 +772,9 @@ static int wl18xx_boot(struct wl1271 *wl)
 	if (ret < 0)
 		goto out;
 
-	wl18xx_set_mac_and_phy(wl);
+	ret = wl18xx_set_mac_and_phy(wl);
+	if (ret < 0)
+		goto out;
 
 	ret = wlcore_boot_run_firmware(wl);
 	if (ret < 0)
@@ -781,7 +786,7 @@ out:
 	return ret;
 }
 
-static void wl18xx_trigger_cmd(struct wl1271 *wl, int cmd_box_addr,
+static int wl18xx_trigger_cmd(struct wl1271 *wl, int cmd_box_addr,
 			       void *buf, size_t len)
 {
 	struct wl18xx_priv *priv = wl->priv;
@@ -789,8 +794,8 @@ static void wl18xx_trigger_cmd(struct wl1271 *wl, int cmd_box_addr,
 	memcpy(priv->cmd_buf, buf, len);
 	memset(priv->cmd_buf + len, 0, WL18XX_CMD_MAX_SIZE - len);
 
-	wl1271_write(wl, cmd_box_addr, priv->cmd_buf, WL18XX_CMD_MAX_SIZE,
-		     false);
+	return wlcore_write(wl, cmd_box_addr, priv->cmd_buf,
+			    WL18XX_CMD_MAX_SIZE, false);
 }
 
 static void wl18xx_ack_event(struct wl1271 *wl)
diff --git a/drivers/net/wireless/ti/wlcore/boot.c b/drivers/net/wireless/ti/wlcore/boot.c
index d7abc50..ee7a401 100644
--- a/drivers/net/wireless/ti/wlcore/boot.c
+++ b/drivers/net/wireless/ti/wlcore/boot.c
@@ -111,6 +111,7 @@ static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf,
 	struct wlcore_partition_set partition;
 	int addr, chunk_num, partition_limit;
 	u8 *p, *chunk;
+	int ret;
 
 	/* whal_FwCtrl_LoadFwImageSm() */
 
@@ -155,7 +156,9 @@ static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf,
 		memcpy(chunk, p, CHUNK_SIZE);
 		wl1271_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x",
 			     p, addr);
-		wl1271_write(wl, addr, chunk, CHUNK_SIZE, false);
+		ret = wlcore_write(wl, addr, chunk, CHUNK_SIZE, false);
+		if (ret < 0)
+			goto out;
 
 		chunk_num++;
 	}
@@ -166,10 +169,11 @@ static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf,
 	memcpy(chunk, p, fw_data_len % CHUNK_SIZE);
 	wl1271_debug(DEBUG_BOOT, "uploading fw last chunk (%zd B) 0x%p to 0x%x",
 		     fw_data_len % CHUNK_SIZE, p, addr);
-	wl1271_write(wl, addr, chunk, fw_data_len % CHUNK_SIZE, false);
+	ret = wlcore_write(wl, addr, chunk, fw_data_len % CHUNK_SIZE, false);
 
+out:
 	kfree(chunk);
-	return 0;
+	return ret;
 }
 
 int wlcore_boot_upload_firmware(struct wl1271 *wl)
@@ -212,6 +216,7 @@ int wlcore_boot_upload_nvs(struct wl1271 *wl)
 	int i;
 	u32 dest_addr, val;
 	u8 *nvs_ptr, *nvs_aligned;
+	int ret;
 
 	if (wl->nvs == NULL) {
 		wl1271_error("NVS file is needed during boot");
@@ -343,11 +348,11 @@ int wlcore_boot_upload_nvs(struct wl1271 *wl)
 		return -ENOMEM;
 
 	/* And finally we upload the NVS tables */
-	wlcore_write_data(wl, REG_CMD_MBOX_ADDRESS,
-			  nvs_aligned, nvs_len, false);
+	ret = wlcore_write_data(wl, REG_CMD_MBOX_ADDRESS, nvs_aligned, nvs_len,
+				false);
 
 	kfree(nvs_aligned);
-	return 0;
+	return ret;
 
 out_badnvs:
 	wl1271_error("nvs data is malformed");
diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c
index 69f27d1..658dccb 100644
--- a/drivers/net/wireless/ti/wlcore/cmd.c
+++ b/drivers/net/wireless/ti/wlcore/cmd.c
@@ -65,13 +65,17 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
 	WARN_ON(len % 4 != 0);
 	WARN_ON(test_bit(WL1271_FLAG_IN_ELP, &wl->flags));
 
-	wl1271_write(wl, wl->cmd_box_addr, buf, len, false);
+	ret = wlcore_write(wl, wl->cmd_box_addr, buf, len, false);
+	if (ret < 0)
+		goto fail;
 
 	/*
 	 * TODO: we just need this because one bit is in a different
 	 * place.  Is there any better way?
 	 */
-	wl->ops->trigger_cmd(wl, wl->cmd_box_addr, buf, len);
+	ret = wl->ops->trigger_cmd(wl, wl->cmd_box_addr, buf, len);
+	if (ret < 0)
+		goto fail;
 
 	timeout = jiffies + msecs_to_jiffies(WL1271_COMMAND_TIMEOUT);
 
@@ -1764,7 +1768,9 @@ int wl12xx_stop_dev(struct wl1271 *wl, struct wl12xx_vif *wlvif)
 		return -EINVAL;
 
 	/* flush all pending packets */
-	wl1271_tx_work_locked(wl);
+	ret = wlcore_tx_work_locked(wl);
+	if (ret < 0)
+		goto out;
 
 	if (test_bit(wlvif->dev_role_id, wl->roc_map)) {
 		ret = wl12xx_croc(wl, wlvif->dev_role_id);
diff --git a/drivers/net/wireless/ti/wlcore/event.c b/drivers/net/wireless/ti/wlcore/event.c
index 858ac33..123d26d 100644
--- a/drivers/net/wireless/ti/wlcore/event.c
+++ b/drivers/net/wireless/ti/wlcore/event.c
@@ -105,6 +105,7 @@ static int wl1271_event_process(struct wl1271 *wl)
 	u32 vector;
 	bool disconnect_sta = false;
 	unsigned long sta_bitmap = 0;
+	int ret;
 
 	wl1271_event_mbox_dump(mbox);
 
@@ -228,7 +229,9 @@ static int wl1271_event_process(struct wl1271 *wl)
 
 	if ((vector & DUMMY_PACKET_EVENT_ID)) {
 		wl1271_debug(DEBUG_EVENT, "DUMMY_PACKET_ID_EVENT_ID");
-		wl1271_tx_dummy_packet(wl);
+		ret = wl1271_tx_dummy_packet(wl);
+		if (ret < 0)
+			return ret;
 	}
 
 	/*
diff --git a/drivers/net/wireless/ti/wlcore/hw_ops.h b/drivers/net/wireless/ti/wlcore/hw_ops.h
index f44d586..2673d78 100644
--- a/drivers/net/wireless/ti/wlcore/hw_ops.h
+++ b/drivers/net/wireless/ti/wlcore/hw_ops.h
@@ -65,11 +65,13 @@ wlcore_hw_get_rx_buf_align(struct wl1271 *wl, u32 rx_desc)
 	return wl->ops->get_rx_buf_align(wl, rx_desc);
 }
 
-static inline void
+static inline int
 wlcore_hw_prepare_read(struct wl1271 *wl, u32 rx_desc, u32 len)
 {
 	if (wl->ops->prepare_read)
-		wl->ops->prepare_read(wl, rx_desc, len);
+		return wl->ops->prepare_read(wl, rx_desc, len);
+
+	return 0;
 }
 
 static inline u32
diff --git a/drivers/net/wireless/ti/wlcore/io.h b/drivers/net/wireless/ti/wlcore/io.h
index d114bb4..2cbf762 100644
--- a/drivers/net/wireless/ti/wlcore/io.h
+++ b/drivers/net/wireless/ti/wlcore/io.h
@@ -102,20 +102,20 @@ static inline int wlcore_read(struct wl1271 *wl, int addr, void *buf,
 	return wlcore_raw_read(wl, physical, buf, len, fixed);
 }
 
-static inline void wl1271_write(struct wl1271 *wl, int addr, void *buf,
-				size_t len, bool fixed)
+static inline int wlcore_write(struct wl1271 *wl, int addr, void *buf,
+			       size_t len, bool fixed)
 {
 	int physical;
 
 	physical = wlcore_translate_addr(wl, addr);
 
-	wlcore_raw_write(wl, physical, buf, len, fixed);
+	return wlcore_raw_write(wl, physical, buf, len, fixed);
 }
 
-static inline void wlcore_write_data(struct wl1271 *wl, int reg, void *buf,
-				     size_t len, bool fixed)
+static inline int wlcore_write_data(struct wl1271 *wl, int reg, void *buf,
+				    size_t len, bool fixed)
 {
-	wl1271_write(wl, wl->rtable[reg], buf, len, fixed);
+	return wlcore_write(wl, wl->rtable[reg], buf, len, fixed);
 }
 
 static inline int wlcore_read_data(struct wl1271 *wl, int reg, void *buf,
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index deb22f8..0461d4e 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -587,7 +587,11 @@ static irqreturn_t wl1271_irq(int irq, void *cookie)
 				 * In order to avoid starvation of the TX path,
 				 * call the work function directly.
 				 */
-				wl1271_tx_work_locked(wl);
+				ret = wlcore_tx_work_locked(wl);
+				if (ret < 0) {
+					wl12xx_queue_recovery_work(wl);
+					goto out;
+				}
 			} else {
 				spin_unlock_irqrestore(&wl->wl_lock, flags);
 			}
@@ -1211,7 +1215,7 @@ int wl1271_tx_dummy_packet(struct wl1271 *wl)
 
 	/* The FW is low on RX memory blocks, so send the dummy packet asap */
 	if (!test_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags))
-		wl1271_tx_work_locked(wl);
+		return wlcore_tx_work_locked(wl);
 
 	/*
 	 * If the FW TX is busy, TX work will be scheduled by the threaded
@@ -2513,7 +2517,10 @@ static int wl12xx_config_vif(struct wl1271 *wl, struct wl12xx_vif *wlvif,
 	     (wlvif->channel != channel) ||
 	     (wlvif->channel_type != conf->channel_type))) {
 		/* send all pending packets */
-		wl1271_tx_work_locked(wl);
+		ret = wlcore_tx_work_locked(wl);
+		if (ret < 0)
+			return ret;
+
 		wlvif->band = conf->channel->band;
 		wlvif->channel = channel;
 		wlvif->channel_type = conf->channel_type;
diff --git a/drivers/net/wireless/ti/wlcore/rx.c b/drivers/net/wireless/ti/wlcore/rx.c
index 59d0956..be24b30 100644
--- a/drivers/net/wireless/ti/wlcore/rx.c
+++ b/drivers/net/wireless/ti/wlcore/rx.c
@@ -235,7 +235,9 @@ int wlcore_rx(struct wl1271 *wl, struct wl_fw_status_1 *status)
 
 		/* Read all available packets at once */
 		des = le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]);
-		wlcore_hw_prepare_read(wl, des, buf_size);
+		ret = wlcore_hw_prepare_read(wl, des, buf_size);
+		if (ret < 0)
+			goto out;
 
 		ret = wlcore_read_data(wl, REG_SLV_MEM_DATA, wl->aggr_buf,
 				       buf_size, true);
diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c
index fc890cb..90bddf5 100644
--- a/drivers/net/wireless/ti/wlcore/tx.c
+++ b/drivers/net/wireless/ti/wlcore/tx.c
@@ -662,7 +662,7 @@ void wl12xx_rearm_rx_streaming(struct wl1271 *wl, unsigned long *active_hlids)
 	}
 }
 
-void wl1271_tx_work_locked(struct wl1271 *wl)
+int wlcore_tx_work_locked(struct wl1271 *wl)
 {
 	struct wl12xx_vif *wlvif;
 	struct sk_buff *skb;
@@ -670,10 +670,10 @@ void wl1271_tx_work_locked(struct wl1271 *wl)
 	u32 buf_offset = 0, last_len = 0;
 	bool sent_packets = false;
 	unsigned long active_hlids[BITS_TO_LONGS(WL12XX_MAX_LINKS)] = {0};
-	int ret;
+	int ret = 0;
 
 	if (unlikely(wl->state == WL1271_STATE_OFF))
-		return;
+		return -EIO;
 
 	while ((skb = wl1271_skb_dequeue(wl))) {
 		struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
@@ -694,8 +694,11 @@ void wl1271_tx_work_locked(struct wl1271 *wl)
 
 			buf_offset = wlcore_hw_pre_pkt_send(wl, buf_offset,
 							    last_len);
-			wlcore_write_data(wl, REG_SLV_MEM_DATA, wl->aggr_buf,
-					  buf_offset, true);
+			ret = wlcore_write_data(wl, REG_SLV_MEM_DATA,
+						wl->aggr_buf, buf_offset, true);
+			if (ret < 0)
+				goto out;
+
 			sent_packets = true;
 			buf_offset = 0;
 			continue;
@@ -731,8 +734,11 @@ void wl1271_tx_work_locked(struct wl1271 *wl)
 out_ack:
 	if (buf_offset) {
 		buf_offset = wlcore_hw_pre_pkt_send(wl, buf_offset, last_len);
-		wlcore_write_data(wl, REG_SLV_MEM_DATA, wl->aggr_buf,
-				  buf_offset, true);
+		ret = wlcore_write_data(wl, REG_SLV_MEM_DATA, wl->aggr_buf,
+					buf_offset, true);
+		if (ret < 0)
+			goto out;
+
 		sent_packets = true;
 	}
 	if (sent_packets) {
@@ -747,6 +753,9 @@ out_ack:
 		wl1271_handle_tx_low_watermark(wl);
 	}
 	wl12xx_rearm_rx_streaming(wl, active_hlids);
+
+out:
+	return ret;
 }
 
 void wl1271_tx_work(struct work_struct *work)
@@ -759,7 +768,11 @@ void wl1271_tx_work(struct work_struct *work)
 	if (ret < 0)
 		goto out;
 
-	wl1271_tx_work_locked(wl);
+	ret = wlcore_tx_work_locked(wl);
+	if (ret < 0) {
+		wl12xx_queue_recovery_work(wl);
+		goto out;
+	}
 
 	wl1271_ps_elp_sleep(wl);
 out:
diff --git a/drivers/net/wireless/ti/wlcore/tx.h b/drivers/net/wireless/ti/wlcore/tx.h
index 1054094..1e939b0 100644
--- a/drivers/net/wireless/ti/wlcore/tx.h
+++ b/drivers/net/wireless/ti/wlcore/tx.h
@@ -234,7 +234,7 @@ static inline int wl1271_tx_total_queue_count(struct wl1271 *wl)
 }
 
 void wl1271_tx_work(struct work_struct *work);
-void wl1271_tx_work_locked(struct wl1271 *wl);
+int wlcore_tx_work_locked(struct wl1271 *wl);
 int wlcore_tx_complete(struct wl1271 *wl);
 void wl12xx_tx_reset_wlvif(struct wl1271 *wl, struct wl12xx_vif *wlvif);
 void wl12xx_tx_reset(struct wl1271 *wl);
diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h
index fd37307..5d51647 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -41,8 +41,8 @@ struct wlcore_ops {
 	int (*identify_fw)(struct wl1271 *wl);
 	int (*boot)(struct wl1271 *wl);
 	int (*plt_init)(struct wl1271 *wl);
-	void (*trigger_cmd)(struct wl1271 *wl, int cmd_box_addr,
-			    void *buf, size_t len);
+	int (*trigger_cmd)(struct wl1271 *wl, int cmd_box_addr,
+			   void *buf, size_t len);
 	void (*ack_event)(struct wl1271 *wl);
 	u32 (*calc_tx_blocks)(struct wl1271 *wl, u32 len, u32 spare_blks);
 	void (*set_tx_desc_blocks)(struct wl1271 *wl,
@@ -53,7 +53,7 @@ struct wlcore_ops {
 				     struct sk_buff *skb);
 	enum wl_rx_buf_align (*get_rx_buf_align)(struct wl1271 *wl,
 						 u32 rx_desc);
-	void (*prepare_read)(struct wl1271 *wl, u32 rx_desc, u32 len);
+	int (*prepare_read)(struct wl1271 *wl, u32 rx_desc, u32 len);
 	u32 (*get_rx_packet_len)(struct wl1271 *wl, void *rx_data,
 				 u32 data_len);
 	int (*tx_delayed_compl)(struct wl1271 *wl);
-- 
cgit v1.1


From 6134323f42b0dbae8e8206414d26cb167b9bedfc Mon Sep 17 00:00:00 2001
From: Ido Yariv <ido@wizery.com>
Date: Mon, 18 Jun 2012 15:50:21 +0300
Subject: wlcore: Propagate errors from wl1271_raw_read32

Propagate errors from wl1271_raw_read32. Since the read functions had no
way of returning errors in-band, change their prototypes.
Also rename prefixes of wlcore functions which their prototypes had to
be changed.

Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wl12xx/main.c   | 152 ++++++++++++++++++++++++--------
 drivers/net/wireless/ti/wl18xx/io.c     |  35 +++++---
 drivers/net/wireless/ti/wl18xx/io.h     |   4 +-
 drivers/net/wireless/ti/wl18xx/main.c   | 114 +++++++++++++++++-------
 drivers/net/wireless/ti/wlcore/boot.c   |  31 +++++--
 drivers/net/wireless/ti/wlcore/cmd.c    |   9 +-
 drivers/net/wireless/ti/wlcore/io.h     |  26 ++++--
 drivers/net/wireless/ti/wlcore/main.c   |  47 +++++++---
 drivers/net/wireless/ti/wlcore/wlcore.h |   4 +-
 9 files changed, 309 insertions(+), 113 deletions(-)

diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index 257745f..ab486f7 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -701,10 +701,11 @@ static void wl12xx_top_reg_write(struct wl1271 *wl, int addr, u16 val)
 	wl1271_write32(wl, WL12XX_OCP_CMD, OCP_CMD_WRITE);
 }
 
-static u16 wl12xx_top_reg_read(struct wl1271 *wl, int addr)
+static int wl12xx_top_reg_read(struct wl1271 *wl, int addr, u16 *out)
 {
 	u32 val;
 	int timeout = OCP_CMD_LOOP;
+	int ret;
 
 	/* write address >> 1 + 0x30000 to OCP_POR_CTR */
 	addr = (addr >> 1) + 0x30000;
@@ -715,29 +716,38 @@ static u16 wl12xx_top_reg_read(struct wl1271 *wl, int addr)
 
 	/* poll for data ready */
 	do {
-		val = wl1271_read32(wl, WL12XX_OCP_DATA_READ);
+		ret = wlcore_read32(wl, WL12XX_OCP_DATA_READ, &val);
+		if (ret < 0)
+			return ret;
 	} while (!(val & OCP_READY_MASK) && --timeout);
 
 	if (!timeout) {
 		wl1271_warning("Top register access timed out.");
-		return 0xffff;
+		return -ETIMEDOUT;
 	}
 
 	/* check data status and return if OK */
-	if ((val & OCP_STATUS_MASK) == OCP_STATUS_OK)
-		return val & 0xffff;
-	else {
+	if ((val & OCP_STATUS_MASK) != OCP_STATUS_OK) {
 		wl1271_warning("Top register access returned error.");
-		return 0xffff;
+		return -EIO;
 	}
+
+	if (out)
+		*out = val & 0xffff;
+
+	return 0;
 }
 
 static int wl128x_switch_tcxo_to_fref(struct wl1271 *wl)
 {
 	u16 spare_reg;
+	int ret;
 
 	/* Mask bits [2] & [8:4] in the sys_clk_cfg register */
-	spare_reg = wl12xx_top_reg_read(wl, WL_SPARE_REG);
+	ret = wl12xx_top_reg_read(wl, WL_SPARE_REG, &spare_reg);
+	if (ret < 0)
+		return ret;
+
 	if (spare_reg == 0xFFFF)
 		return -EFAULT;
 	spare_reg |= (BIT(3) | BIT(5) | BIT(6));
@@ -756,8 +766,12 @@ static int wl128x_switch_tcxo_to_fref(struct wl1271 *wl)
 static bool wl128x_is_tcxo_valid(struct wl1271 *wl)
 {
 	u16 tcxo_detection;
+	int ret;
+
+	ret = wl12xx_top_reg_read(wl, TCXO_CLK_DETECT_REG, &tcxo_detection);
+	if (ret < 0)
+		return false;
 
-	tcxo_detection = wl12xx_top_reg_read(wl, TCXO_CLK_DETECT_REG);
 	if (tcxo_detection & TCXO_DET_FAILED)
 		return false;
 
@@ -767,8 +781,12 @@ static bool wl128x_is_tcxo_valid(struct wl1271 *wl)
 static bool wl128x_is_fref_valid(struct wl1271 *wl)
 {
 	u16 fref_detection;
+	int ret;
+
+	ret = wl12xx_top_reg_read(wl, FREF_CLK_DETECT_REG, &fref_detection);
+	if (ret < 0)
+		return false;
 
-	fref_detection = wl12xx_top_reg_read(wl, FREF_CLK_DETECT_REG);
 	if (fref_detection & FREF_CLK_DETECT_FAIL)
 		return false;
 
@@ -790,9 +808,13 @@ static int wl128x_configure_mcs_pll(struct wl1271 *wl, int clk)
 	u16 pll_config;
 	u8 input_freq;
 	struct wl12xx_priv *priv = wl->priv;
+	int ret;
 
 	/* Mask bits [3:1] in the sys_clk_cfg register */
-	spare_reg = wl12xx_top_reg_read(wl, WL_SPARE_REG);
+	ret = wl12xx_top_reg_read(wl, WL_SPARE_REG, &spare_reg);
+	if (ret < 0)
+		return ret;
+
 	if (spare_reg == 0xFFFF)
 		return -EFAULT;
 	spare_reg |= BIT(2);
@@ -806,7 +828,10 @@ static int wl128x_configure_mcs_pll(struct wl1271 *wl, int clk)
 	/* Set the input frequency according to the selected clock source */
 	input_freq = (clk & 1) + 1;
 
-	pll_config = wl12xx_top_reg_read(wl, MCS_PLL_CONFIG_REG);
+	ret = wl12xx_top_reg_read(wl, MCS_PLL_CONFIG_REG, &pll_config);
+	if (ret < 0)
+		return ret;
+
 	if (pll_config == 0xFFFF)
 		return -EFAULT;
 	pll_config |= (input_freq << MCS_SEL_IN_FREQ_SHIFT);
@@ -827,6 +852,7 @@ static int wl128x_boot_clk(struct wl1271 *wl, int *selected_clock)
 {
 	struct wl12xx_priv *priv = wl->priv;
 	u16 sys_clk_cfg;
+	int ret;
 
 	/* For XTAL-only modes, FREF will be used after switching from TCXO */
 	if (priv->ref_clock == WL12XX_REFCLOCK_26_XTAL ||
@@ -837,7 +863,10 @@ static int wl128x_boot_clk(struct wl1271 *wl, int *selected_clock)
 	}
 
 	/* Query the HW, to determine which clock source we should use */
-	sys_clk_cfg = wl12xx_top_reg_read(wl, SYS_CLK_CFG_REG);
+	ret = wl12xx_top_reg_read(wl, SYS_CLK_CFG_REG, &sys_clk_cfg);
+	if (ret < 0)
+		return ret;
+
 	if (sys_clk_cfg == 0xFFFF)
 		return -EINVAL;
 	if (sys_clk_cfg & PRCM_CM_EN_MUX_WLAN_FREF)
@@ -872,6 +901,7 @@ static int wl127x_boot_clk(struct wl1271 *wl)
 	struct wl12xx_priv *priv = wl->priv;
 	u32 pause;
 	u32 clk;
+	int ret;
 
 	if (WL127X_PG_GET_MAJOR(wl->hw_pg_ver) < 3)
 		wl->quirks |= WLCORE_QUIRK_END_OF_TRANSACTION;
@@ -892,18 +922,27 @@ static int wl127x_boot_clk(struct wl1271 *wl)
 	if (priv->ref_clock != CONF_REF_CLK_19_2_E) {
 		u16 val;
 		/* Set clock type (open drain) */
-		val = wl12xx_top_reg_read(wl, OCP_REG_CLK_TYPE);
+		ret = wl12xx_top_reg_read(wl, OCP_REG_CLK_TYPE, &val);
+		if (ret < 0)
+			goto out;
+
 		val &= FREF_CLK_TYPE_BITS;
 		wl12xx_top_reg_write(wl, OCP_REG_CLK_TYPE, val);
 
 		/* Set clock pull mode (no pull) */
-		val = wl12xx_top_reg_read(wl, OCP_REG_CLK_PULL);
+		ret = wl12xx_top_reg_read(wl, OCP_REG_CLK_PULL, &val);
+		if (ret < 0)
+			goto out;
+
 		val |= NO_PULL;
 		wl12xx_top_reg_write(wl, OCP_REG_CLK_PULL, val);
 	} else {
 		u16 val;
 		/* Set clock polarity */
-		val = wl12xx_top_reg_read(wl, OCP_REG_CLK_POLARITY);
+		ret = wl12xx_top_reg_read(wl, OCP_REG_CLK_POLARITY, &val);
+		if (ret < 0)
+			goto out;
+
 		val &= FREF_CLK_POLARITY_BITS;
 		val |= CLK_REQ_OUTN_SEL;
 		wl12xx_top_reg_write(wl, OCP_REG_CLK_POLARITY, val);
@@ -911,7 +950,9 @@ static int wl127x_boot_clk(struct wl1271 *wl)
 
 	wl1271_write32(wl, WL12XX_PLL_PARAMETERS, clk);
 
-	pause = wl1271_read32(wl, WL12XX_PLL_PARAMETERS);
+	ret = wlcore_read32(wl, WL12XX_PLL_PARAMETERS, &pause);
+	if (ret < 0)
+		goto out;
 
 	wl1271_debug(DEBUG_BOOT, "pause1 0x%x", pause);
 
@@ -919,13 +960,15 @@ static int wl127x_boot_clk(struct wl1271 *wl)
 	pause |= WU_COUNTER_PAUSE_VAL;
 	wl1271_write32(wl, WL12XX_WU_COUNTER_PAUSE, pause);
 
-	return 0;
+out:
+	return ret;
 }
 
 static int wl1271_boot_soft_reset(struct wl1271 *wl)
 {
 	unsigned long timeout;
 	u32 boot_data;
+	int ret = 0;
 
 	/* perform soft reset */
 	wl1271_write32(wl, WL12XX_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);
@@ -933,7 +976,10 @@ static int wl1271_boot_soft_reset(struct wl1271 *wl)
 	/* SOFT_RESET is self clearing */
 	timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME);
 	while (1) {
-		boot_data = wl1271_read32(wl, WL12XX_SLV_SOFT_RESET);
+		ret = wlcore_read32(wl, WL12XX_SLV_SOFT_RESET, &boot_data);
+		if (ret < 0)
+			goto out;
+
 		wl1271_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data);
 		if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0)
 			break;
@@ -954,7 +1000,8 @@ static int wl1271_boot_soft_reset(struct wl1271 *wl)
 	/* disable auto calibration on start*/
 	wl1271_write32(wl, WL12XX_SPARE_A2, 0xffff);
 
-	return 0;
+out:
+	return ret;
 }
 
 static int wl12xx_pre_boot(struct wl1271 *wl)
@@ -984,7 +1031,9 @@ static int wl12xx_pre_boot(struct wl1271 *wl)
 	   to be used by DRPw FW. The RTRIM value will be added by the FW
 	   before taking DRPw out of reset */
 
-	clk = wl1271_read32(wl, WL12XX_DRPW_SCRATCH_START);
+	ret = wlcore_read32(wl, WL12XX_DRPW_SCRATCH_START, &clk);
+	if (ret < 0)
+		goto out;
 
 	wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk);
 
@@ -1008,9 +1057,11 @@ out:
 	return ret;
 }
 
-static void wl12xx_pre_upload(struct wl1271 *wl)
+static int wl12xx_pre_upload(struct wl1271 *wl)
 {
-	u32 tmp, polarity;
+	u32 tmp;
+	u16 polarity;
+	int ret;
 
 	/* write firmware's last address (ie. it's length) to
 	 * ACX_EEPROMLESS_IND_REG */
@@ -1018,12 +1069,16 @@ static void wl12xx_pre_upload(struct wl1271 *wl)
 
 	wl1271_write32(wl, WL12XX_EEPROMLESS_IND, WL12XX_EEPROMLESS_IND);
 
-	tmp = wlcore_read_reg(wl, REG_CHIP_ID_B);
+	ret = wlcore_read_reg(wl, REG_CHIP_ID_B, &tmp);
+	if (ret < 0)
+		goto out;
 
 	wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp);
 
 	/* 6. read the EEPROM parameters */
-	tmp = wl1271_read32(wl, WL12XX_SCR_PAD2);
+	ret = wlcore_read32(wl, WL12XX_SCR_PAD2, &tmp);
+	if (ret < 0)
+		goto out;
 
 	/* WL1271: The reference driver skips steps 7 to 10 (jumps directly
 	 * to upload_fw) */
@@ -1032,12 +1087,16 @@ static void wl12xx_pre_upload(struct wl1271 *wl)
 		wl12xx_top_reg_write(wl, SDIO_IO_DS, HCI_IO_DS_6MA);
 
 	/* polarity must be set before the firmware is loaded */
-	polarity = wl12xx_top_reg_read(wl, OCP_REG_POLARITY);
+	ret = wl12xx_top_reg_read(wl, OCP_REG_POLARITY, &polarity);
+	if (ret < 0)
+		goto out;
 
 	/* We use HIGH polarity, so unset the LOW bit */
 	polarity &= ~POLARITY_LOW;
 	wl12xx_top_reg_write(wl, OCP_REG_POLARITY, polarity);
 
+out:
+	return ret;
 }
 
 static void wl12xx_enable_interrupts(struct wl1271 *wl)
@@ -1063,7 +1122,9 @@ static int wl12xx_boot(struct wl1271 *wl)
 	if (ret < 0)
 		goto out;
 
-	wl12xx_pre_upload(wl);
+	ret = wl12xx_pre_upload(wl);
+	if (ret < 0)
+		goto out;
 
 	ret = wlcore_boot_upload_firmware(wl);
 	if (ret < 0)
@@ -1282,14 +1343,20 @@ static bool wl12xx_mac_in_fuse(struct wl1271 *wl)
 	return supported;
 }
 
-static void wl12xx_get_fuse_mac(struct wl1271 *wl)
+static int wl12xx_get_fuse_mac(struct wl1271 *wl)
 {
 	u32 mac1, mac2;
+	int ret;
 
 	wlcore_set_partition(wl, &wl->ptable[PART_DRPW]);
 
-	mac1 = wl1271_read32(wl, WL12XX_REG_FUSE_BD_ADDR_1);
-	mac2 = wl1271_read32(wl, WL12XX_REG_FUSE_BD_ADDR_2);
+	ret = wlcore_read32(wl, WL12XX_REG_FUSE_BD_ADDR_1, &mac1);
+	if (ret < 0)
+		goto out;
+
+	ret = wlcore_read32(wl, WL12XX_REG_FUSE_BD_ADDR_2, &mac2);
+	if (ret < 0)
+		goto out;
 
 	/* these are the two parts of the BD_ADDR */
 	wl->fuse_oui_addr = ((mac2 & 0xffff) << 8) +
@@ -1297,24 +1364,35 @@ static void wl12xx_get_fuse_mac(struct wl1271 *wl)
 	wl->fuse_nic_addr = mac1 & 0xffffff;
 
 	wlcore_set_partition(wl, &wl->ptable[PART_DOWN]);
+
+out:
+	return ret;
 }
 
-static s8 wl12xx_get_pg_ver(struct wl1271 *wl)
+static int wl12xx_get_pg_ver(struct wl1271 *wl, s8 *ver)
 {
-	u32 die_info;
+	u16 die_info;
+	int ret;
 
 	if (wl->chip.id == CHIP_ID_1283_PG20)
-		die_info = wl12xx_top_reg_read(wl, WL128X_REG_FUSE_DATA_2_1);
+		ret = wl12xx_top_reg_read(wl, WL128X_REG_FUSE_DATA_2_1,
+					  &die_info);
 	else
-		die_info = wl12xx_top_reg_read(wl, WL127X_REG_FUSE_DATA_2_1);
+		ret = wl12xx_top_reg_read(wl, WL127X_REG_FUSE_DATA_2_1,
+					  &die_info);
 
-	return (s8) (die_info & PG_VER_MASK) >> PG_VER_OFFSET;
+	if (ret >= 0 && ver)
+		*ver = (s8)((die_info & PG_VER_MASK) >> PG_VER_OFFSET);
+
+	return ret;
 }
 
-static void wl12xx_get_mac(struct wl1271 *wl)
+static int wl12xx_get_mac(struct wl1271 *wl)
 {
 	if (wl12xx_mac_in_fuse(wl))
-		wl12xx_get_fuse_mac(wl);
+		return wl12xx_get_fuse_mac(wl);
+
+	return 0;
 }
 
 static void wl12xx_set_tx_desc_csum(struct wl1271 *wl,
diff --git a/drivers/net/wireless/ti/wl18xx/io.c b/drivers/net/wireless/ti/wl18xx/io.c
index 598c057..92c2c03 100644
--- a/drivers/net/wireless/ti/wl18xx/io.c
+++ b/drivers/net/wireless/ti/wl18xx/io.c
@@ -24,37 +24,52 @@
 
 #include "io.h"
 
-void wl18xx_top_reg_write(struct wl1271 *wl, int addr, u16 val)
+int wl18xx_top_reg_write(struct wl1271 *wl, int addr, u16 val)
 {
 	u32 tmp;
+	int ret;
 
 	if (WARN_ON(addr % 2))
-		return;
+		return -EINVAL;
 
 	if ((addr % 4) == 0) {
-		tmp = wl1271_read32(wl, addr);
+		ret = wlcore_read32(wl, addr, &tmp);
+		if (ret < 0)
+			goto out;
+
 		tmp = (tmp & 0xffff0000) | val;
 		wl1271_write32(wl, addr, tmp);
 	} else {
-		tmp = wl1271_read32(wl, addr - 2);
+		ret = wlcore_read32(wl, addr - 2, &tmp);
+		if (ret < 0)
+			goto out;
+
 		tmp = (tmp & 0xffff) | (val << 16);
 		wl1271_write32(wl, addr - 2, tmp);
 	}
+
+out:
+	return ret;
 }
 
-u16 wl18xx_top_reg_read(struct wl1271 *wl, int addr)
+int wl18xx_top_reg_read(struct wl1271 *wl, int addr, u16 *out)
 {
 	u32 val;
+	int ret;
 
 	if (WARN_ON(addr % 2))
-		return 0;
+		return -EINVAL;
 
 	if ((addr % 4) == 0) {
 		/* address is 4-bytes aligned */
-		val = wl1271_read32(wl, addr);
-		return val & 0xffff;
+		ret = wlcore_read32(wl, addr, &val);
+		if (ret >= 0 && out)
+			*out = val & 0xffff;
 	} else {
-		val = wl1271_read32(wl, addr - 2);
-		return (val & 0xffff0000) >> 16;
+		ret = wlcore_read32(wl, addr - 2, &val);
+		if (ret >= 0 && out)
+			*out = (val & 0xffff0000) >> 16;
 	}
+
+	return ret;
 }
diff --git a/drivers/net/wireless/ti/wl18xx/io.h b/drivers/net/wireless/ti/wl18xx/io.h
index be4e126..0e1b8d2 100644
--- a/drivers/net/wireless/ti/wl18xx/io.h
+++ b/drivers/net/wireless/ti/wl18xx/io.h
@@ -22,7 +22,7 @@
 #ifndef __WL18XX_IO_H__
 #define __WL18XX_IO_H__
 
-void wl18xx_top_reg_write(struct wl1271 *wl, int addr, u16 val);
-u16 wl18xx_top_reg_read(struct wl1271 *wl, int addr);
+int wl18xx_top_reg_write(struct wl1271 *wl, int addr, u16 val);
+int wl18xx_top_reg_read(struct wl1271 *wl, int addr, u16 *out);
 
 #endif /* __WL18XX_IO_H__ */
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index 974a6ff..f99f003 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -636,45 +636,67 @@ out:
 	return ret;
 }
 
-static void wl18xx_set_clk(struct wl1271 *wl)
+static int wl18xx_set_clk(struct wl1271 *wl)
 {
-	u32 clk_freq;
+	u16 clk_freq;
+	int ret;
 
 	wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]);
 
 	/* TODO: PG2: apparently we need to read the clk type */
 
-	clk_freq = wl18xx_top_reg_read(wl, PRIMARY_CLK_DETECT);
+	ret = wl18xx_top_reg_read(wl, PRIMARY_CLK_DETECT, &clk_freq);
+	if (ret < 0)
+		goto out;
+
 	wl1271_debug(DEBUG_BOOT, "clock freq %d (%d, %d, %d, %d, %s)", clk_freq,
 		     wl18xx_clk_table[clk_freq].n, wl18xx_clk_table[clk_freq].m,
 		     wl18xx_clk_table[clk_freq].p, wl18xx_clk_table[clk_freq].q,
 		     wl18xx_clk_table[clk_freq].swallow ? "swallow" : "spit");
 
-	wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_N, wl18xx_clk_table[clk_freq].n);
-	wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_M, wl18xx_clk_table[clk_freq].m);
+	ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_N,
+				   wl18xx_clk_table[clk_freq].n);
+	if (ret < 0)
+		goto out;
+
+	ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_M,
+				   wl18xx_clk_table[clk_freq].m);
+	if (ret < 0)
+		goto out;
 
 	if (wl18xx_clk_table[clk_freq].swallow) {
 		/* first the 16 lower bits */
-		wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_Q_FACTOR_CFG_1,
-				     wl18xx_clk_table[clk_freq].q &
-				     PLLSH_WCS_PLL_Q_FACTOR_CFG_1_MASK);
+		ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_Q_FACTOR_CFG_1,
+					   wl18xx_clk_table[clk_freq].q &
+					   PLLSH_WCS_PLL_Q_FACTOR_CFG_1_MASK);
+		if (ret < 0)
+			goto out;
+
 		/* then the 16 higher bits, masked out */
-		wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_Q_FACTOR_CFG_2,
-				     (wl18xx_clk_table[clk_freq].q >> 16) &
-				     PLLSH_WCS_PLL_Q_FACTOR_CFG_2_MASK);
+		ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_Q_FACTOR_CFG_2,
+					(wl18xx_clk_table[clk_freq].q >> 16) &
+					PLLSH_WCS_PLL_Q_FACTOR_CFG_2_MASK);
+		if (ret < 0)
+			goto out;
 
 		/* first the 16 lower bits */
-		wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_P_FACTOR_CFG_1,
-				     wl18xx_clk_table[clk_freq].p &
-				     PLLSH_WCS_PLL_P_FACTOR_CFG_1_MASK);
+		ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_P_FACTOR_CFG_1,
+					   wl18xx_clk_table[clk_freq].p &
+					   PLLSH_WCS_PLL_P_FACTOR_CFG_1_MASK);
+		if (ret < 0)
+			goto out;
+
 		/* then the 16 higher bits, masked out */
-		wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_P_FACTOR_CFG_2,
-				     (wl18xx_clk_table[clk_freq].p >> 16) &
-				     PLLSH_WCS_PLL_P_FACTOR_CFG_2_MASK);
+		ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_P_FACTOR_CFG_2,
+					(wl18xx_clk_table[clk_freq].p >> 16) &
+					PLLSH_WCS_PLL_P_FACTOR_CFG_2_MASK);
 	} else {
-		wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_SWALLOW_EN,
-				     PLLSH_WCS_PLL_SWALLOW_EN_VAL2);
+		ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_SWALLOW_EN,
+					   PLLSH_WCS_PLL_SWALLOW_EN_VAL2);
 	}
+
+out:
+	return ret;
 }
 
 static void wl18xx_boot_soft_reset(struct wl1271 *wl)
@@ -688,7 +710,11 @@ static void wl18xx_boot_soft_reset(struct wl1271 *wl)
 
 static int wl18xx_pre_boot(struct wl1271 *wl)
 {
-	wl18xx_set_clk(wl);
+	int ret;
+
+	ret = wl18xx_set_clk(wl);
+	if (ret < 0)
+		goto out;
 
 	/* Continue the ELP wake up sequence */
 	wl1271_write32(wl, WL18XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
@@ -701,23 +727,30 @@ static int wl18xx_pre_boot(struct wl1271 *wl)
 
 	wl18xx_boot_soft_reset(wl);
 
-	return 0;
+out:
+	return ret;
 }
 
-static void wl18xx_pre_upload(struct wl1271 *wl)
+static int wl18xx_pre_upload(struct wl1271 *wl)
 {
 	u32 tmp;
+	int ret;
 
 	wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
 
 	/* TODO: check if this is all needed */
 	wl1271_write32(wl, WL18XX_EEPROMLESS_IND, WL18XX_EEPROMLESS_IND);
 
-	tmp = wlcore_read_reg(wl, REG_CHIP_ID_B);
+	ret = wlcore_read_reg(wl, REG_CHIP_ID_B, &tmp);
+	if (ret < 0)
+		goto out;
 
 	wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp);
 
-	tmp = wl1271_read32(wl, WL18XX_SCR_PAD2);
+	ret = wlcore_read32(wl, WL18XX_SCR_PAD2, &tmp);
+
+out:
+	return ret;
 }
 
 static int wl18xx_set_mac_and_phy(struct wl1271 *wl)
@@ -766,7 +799,9 @@ static int wl18xx_boot(struct wl1271 *wl)
 	if (ret < 0)
 		goto out;
 
-	wl18xx_pre_upload(wl);
+	ret = wl18xx_pre_upload(wl);
+	if (ret < 0)
+		goto out;
 
 	ret = wlcore_boot_upload_firmware(wl);
 	if (ret < 0)
@@ -998,18 +1033,24 @@ static u32 wl18xx_ap_get_mimo_wide_rate_mask(struct wl1271 *wl,
 	}
 }
 
-static s8 wl18xx_get_pg_ver(struct wl1271 *wl)
+static int wl18xx_get_pg_ver(struct wl1271 *wl, s8 *ver)
 {
 	u32 fuse;
+	int ret;
 
 	wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]);
 
-	fuse = wl1271_read32(wl, WL18XX_REG_FUSE_DATA_1_3);
-	fuse = (fuse & WL18XX_PG_VER_MASK) >> WL18XX_PG_VER_OFFSET;
+	ret = wlcore_read32(wl, WL18XX_REG_FUSE_DATA_1_3, &fuse);
+	if (ret < 0)
+		goto out;
+
+	if (ver)
+		*ver = (fuse & WL18XX_PG_VER_MASK) >> WL18XX_PG_VER_OFFSET;
 
 	wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
 
-	return (s8)fuse;
+out:
+	return ret;
 }
 
 #define WL18XX_CONF_FILE_NAME "ti-connectivity/wl18xx-conf.bin"
@@ -1080,14 +1121,20 @@ static int wl18xx_plt_init(struct wl1271 *wl)
 	return wl->ops->boot(wl);
 }
 
-static void wl18xx_get_mac(struct wl1271 *wl)
+static int wl18xx_get_mac(struct wl1271 *wl)
 {
 	u32 mac1, mac2;
+	int ret;
 
 	wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]);
 
-	mac1 = wl1271_read32(wl, WL18XX_REG_FUSE_BD_ADDR_1);
-	mac2 = wl1271_read32(wl, WL18XX_REG_FUSE_BD_ADDR_2);
+	ret = wlcore_read32(wl, WL18XX_REG_FUSE_BD_ADDR_1, &mac1);
+	if (ret < 0)
+		goto out;
+
+	ret = wlcore_read32(wl, WL18XX_REG_FUSE_BD_ADDR_2, &mac2);
+	if (ret < 0)
+		goto out;
 
 	/* these are the two parts of the BD_ADDR */
 	wl->fuse_oui_addr = ((mac2 & 0xffff) << 8) +
@@ -1095,6 +1142,9 @@ static void wl18xx_get_mac(struct wl1271 *wl)
 	wl->fuse_nic_addr = (mac1 & 0xffffff);
 
 	wlcore_set_partition(wl, &wl->ptable[PART_DOWN]);
+
+out:
+	return ret;
 }
 
 static int wl18xx_handle_static_data(struct wl1271 *wl,
diff --git a/drivers/net/wireless/ti/wlcore/boot.c b/drivers/net/wireless/ti/wlcore/boot.c
index ee7a401..0aa0e29 100644
--- a/drivers/net/wireless/ti/wlcore/boot.c
+++ b/drivers/net/wireless/ti/wlcore/boot.c
@@ -33,16 +33,22 @@
 #include "rx.h"
 #include "hw_ops.h"
 
-static void wl1271_boot_set_ecpu_ctrl(struct wl1271 *wl, u32 flag)
+static int wl1271_boot_set_ecpu_ctrl(struct wl1271 *wl, u32 flag)
 {
 	u32 cpu_ctrl;
+	int ret;
 
 	/* 10.5.0 run the firmware (I) */
-	cpu_ctrl = wlcore_read_reg(wl, REG_ECPU_CONTROL);
+	ret = wlcore_read_reg(wl, REG_ECPU_CONTROL, &cpu_ctrl);
+	if (ret < 0)
+		goto out;
 
 	/* 10.5.1 run the firmware (II) */
 	cpu_ctrl |= flag;
 	wlcore_write_reg(wl, REG_ECPU_CONTROL, cpu_ctrl);
+
+out:
+	return ret;
 }
 
 static int wlcore_boot_parse_fw_ver(struct wl1271 *wl,
@@ -368,9 +374,13 @@ int wlcore_boot_run_firmware(struct wl1271 *wl)
 	/* Make sure we have the boot partition */
 	wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
 
-	wl1271_boot_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
+	ret = wl1271_boot_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
+	if (ret < 0)
+		return ret;
 
-	chip_id = wlcore_read_reg(wl, REG_CHIP_ID_B);
+	ret = wlcore_read_reg(wl, REG_CHIP_ID_B, &chip_id);
+	if (ret < 0)
+		return ret;
 
 	wl1271_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id);
 
@@ -383,7 +393,9 @@ int wlcore_boot_run_firmware(struct wl1271 *wl)
 	loop = 0;
 	while (loop++ < INIT_LOOP) {
 		udelay(INIT_LOOP_DELAY);
-		intr = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR);
+		ret = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR, &intr);
+		if (ret < 0)
+			return ret;
 
 		if (intr == 0xffffffff) {
 			wl1271_error("error reading hardware complete "
@@ -405,12 +417,17 @@ int wlcore_boot_run_firmware(struct wl1271 *wl)
 	}
 
 	/* get hardware config command mail box */
-	wl->cmd_box_addr = wlcore_read_reg(wl, REG_COMMAND_MAILBOX_PTR);
+	ret = wlcore_read_reg(wl, REG_COMMAND_MAILBOX_PTR, &wl->cmd_box_addr);
+	if (ret < 0)
+		return ret;
 
 	wl1271_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x", wl->cmd_box_addr);
 
 	/* get hardware config event mail box */
-	wl->mbox_ptr[0] = wlcore_read_reg(wl, REG_EVENT_MAILBOX_PTR);
+	ret = wlcore_read_reg(wl, REG_EVENT_MAILBOX_PTR, &wl->mbox_ptr[0]);
+	if (ret < 0)
+		return ret;
+
 	wl->mbox_ptr[1] = wl->mbox_ptr[0] + sizeof(struct event_mailbox);
 
 	wl1271_debug(DEBUG_MAILBOX, "MBOX ptrs: 0x%x 0x%x",
diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c
index 658dccb..f2ac982 100644
--- a/drivers/net/wireless/ti/wlcore/cmd.c
+++ b/drivers/net/wireless/ti/wlcore/cmd.c
@@ -79,7 +79,10 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
 
 	timeout = jiffies + msecs_to_jiffies(WL1271_COMMAND_TIMEOUT);
 
-	intr = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR);
+	ret = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR, &intr);
+	if (ret < 0)
+		goto fail;
+
 	while (!(intr & WL1271_ACX_INTR_CMD_COMPLETE)) {
 		if (time_after(jiffies, timeout)) {
 			wl1271_error("command complete timeout");
@@ -93,7 +96,9 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
 		else
 			msleep(1);
 
-		intr = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR);
+		ret = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR, &intr);
+		if (ret < 0)
+			goto fail;
 	}
 
 	/* read back the status code of the command */
diff --git a/drivers/net/wireless/ti/wlcore/io.h b/drivers/net/wireless/ti/wlcore/io.h
index 2cbf762..0395b03 100644
--- a/drivers/net/wireless/ti/wlcore/io.h
+++ b/drivers/net/wireless/ti/wlcore/io.h
@@ -77,12 +77,19 @@ static inline int wlcore_raw_write_data(struct wl1271 *wl, int reg, void *buf,
 	return wlcore_raw_write(wl, wl->rtable[reg], buf, len, fixed);
 }
 
-static inline u32 wl1271_raw_read32(struct wl1271 *wl, int addr)
+static inline int wlcore_raw_read32(struct wl1271 *wl, int addr, u32 *val)
 {
-	wlcore_raw_read(wl, addr, &wl->buffer_32,
-			    sizeof(wl->buffer_32), false);
+	int ret;
+
+	ret = wlcore_raw_read(wl, addr, &wl->buffer_32,
+			      sizeof(wl->buffer_32), false);
+	if (ret < 0)
+		return ret;
+
+	if (val)
+		*val = le32_to_cpu(wl->buffer_32);
 
-	return le32_to_cpu(wl->buffer_32);
+	return 0;
 }
 
 static inline void wl1271_raw_write32(struct wl1271 *wl, int addr, u32 val)
@@ -138,9 +145,9 @@ static inline void wl1271_read_hwaddr(struct wl1271 *wl, int hwaddr,
 	wlcore_raw_read(wl, physical, buf, len, fixed);
 }
 
-static inline u32 wl1271_read32(struct wl1271 *wl, int addr)
+static inline int wlcore_read32(struct wl1271 *wl, int addr, u32 *val)
 {
-	return wl1271_raw_read32(wl, wlcore_translate_addr(wl, addr));
+	return wlcore_raw_read32(wl, wlcore_translate_addr(wl, addr), val);
 }
 
 static inline void wl1271_write32(struct wl1271 *wl, int addr, u32 val)
@@ -148,10 +155,11 @@ static inline void wl1271_write32(struct wl1271 *wl, int addr, u32 val)
 	wl1271_raw_write32(wl, wlcore_translate_addr(wl, addr), val);
 }
 
-static inline u32 wlcore_read_reg(struct wl1271 *wl, int reg)
+static inline int wlcore_read_reg(struct wl1271 *wl, int reg, u32 *val)
 {
-	return wl1271_raw_read32(wl,
-				 wlcore_translate_addr(wl, wl->rtable[reg]));
+	return wlcore_raw_read32(wl,
+				 wlcore_translate_addr(wl, wl->rtable[reg]),
+				 val);
 }
 
 static inline void wlcore_write_reg(struct wl1271 *wl, int reg, u32 val)
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 0461d4e..c16d266 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -872,6 +872,32 @@ out:
 	kfree(block);
 }
 
+static void wlcore_print_recovery(struct wl1271 *wl)
+{
+	u32 pc = 0;
+	u32 hint_sts = 0;
+	int ret;
+
+	wl1271_info("Hardware recovery in progress. FW ver: %s",
+		    wl->chip.fw_ver_str);
+
+	/* change partitions momentarily so we can read the FW pc */
+	wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
+
+	ret = wlcore_read_reg(wl, REG_PC_ON_RECOVERY, &pc);
+	if (ret < 0)
+		return;
+
+	ret = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR, &hint_sts);
+	if (ret < 0)
+		return;
+
+	wl1271_info("pc: 0x%x, hint_sts: 0x%08x", pc, hint_sts);
+
+	wlcore_set_partition(wl, &wl->ptable[PART_WORK]);
+}
+
+
 static void wl1271_recovery_work(struct work_struct *work)
 {
 	struct wl1271 *wl =
@@ -886,14 +912,7 @@ static void wl1271_recovery_work(struct work_struct *work)
 
 	wl12xx_read_fwlog_panic(wl);
 
-	/* change partitions momentarily so we can read the FW pc */
-	wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
-	wl1271_info("Hardware recovery in progress. FW ver: %s pc: 0x%x "
-		    "hint_sts: 0x%08x",
-		    wl->chip.fw_ver_str,
-		    wlcore_read_reg(wl, REG_PC_ON_RECOVERY),
-		    wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR));
-	wlcore_set_partition(wl, &wl->ptable[PART_WORK]);
+	wlcore_print_recovery(wl);
 
 	BUG_ON(bug_on_recovery &&
 	       !test_bit(WL1271_FLAG_INTENDED_FW_RECOVERY, &wl->flags));
@@ -4979,18 +4998,22 @@ static int wl12xx_get_hw_info(struct wl1271 *wl)
 	if (ret < 0)
 		goto out;
 
-	wl->chip.id = wlcore_read_reg(wl, REG_CHIP_ID_B);
+	ret = wlcore_read_reg(wl, REG_CHIP_ID_B, &wl->chip.id);
+	if (ret < 0)
+		goto out;
 
 	wl->fuse_oui_addr = 0;
 	wl->fuse_nic_addr = 0;
 
-	wl->hw_pg_ver = wl->ops->get_pg_ver(wl);
+	ret = wl->ops->get_pg_ver(wl, &wl->hw_pg_ver);
+	if (ret < 0)
+		goto out;
 
 	if (wl->ops->get_mac)
-		wl->ops->get_mac(wl);
+		ret = wl->ops->get_mac(wl);
 
-	wl1271_power_off(wl);
 out:
+	wl1271_power_off(wl);
 	return ret;
 }
 
diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h
index 5d51647..2fb5374 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -62,8 +62,8 @@ struct wlcore_ops {
 	int (*init_vif)(struct wl1271 *wl, struct wl12xx_vif *wlvif);
 	u32 (*sta_get_ap_rate_mask)(struct wl1271 *wl,
 				    struct wl12xx_vif *wlvif);
-	s8 (*get_pg_ver)(struct wl1271 *wl);
-	void (*get_mac)(struct wl1271 *wl);
+	int (*get_pg_ver)(struct wl1271 *wl, s8 *ver);
+	int (*get_mac)(struct wl1271 *wl);
 	void (*set_tx_desc_csum)(struct wl1271 *wl,
 				 struct wl1271_tx_hw_descr *desc,
 				 struct sk_buff *skb);
-- 
cgit v1.1


From b0f0ad39e3d2716fe9ca6e50ce4cda87eb409ee0 Mon Sep 17 00:00:00 2001
From: Ido Yariv <ido@wizery.com>
Date: Wed, 20 Jun 2012 00:48:23 +0300
Subject: wlcore: Propagate errors from wl1271_raw_write32

Propagate errors from wl1271_raw_write32 and request for recovery when
appropriate.
Also rename prefixes of wlcore functions which their prototypes had to
be changed.

Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wl12xx/main.c   | 160 +++++++++++++++++++++++---------
 drivers/net/wireless/ti/wl18xx/io.c     |   4 +-
 drivers/net/wireless/ti/wl18xx/main.c   |  86 ++++++++++++-----
 drivers/net/wireless/ti/wlcore/boot.c   |  32 +++++--
 drivers/net/wireless/ti/wlcore/cmd.c    |   6 +-
 drivers/net/wireless/ti/wlcore/event.c  |   4 +-
 drivers/net/wireless/ti/wlcore/io.c     |  49 ++++++----
 drivers/net/wireless/ti/wlcore/io.h     |  22 ++---
 drivers/net/wireless/ti/wlcore/main.c   |  20 +++-
 drivers/net/wireless/ti/wlcore/ps.c     |  14 ++-
 drivers/net/wireless/ti/wlcore/rx.c     |   9 +-
 drivers/net/wireless/ti/wlcore/tx.c     |  17 ++--
 drivers/net/wireless/ti/wlcore/wlcore.h |   2 +-
 13 files changed, 298 insertions(+), 127 deletions(-)

diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index ab486f7..3a4ab65 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -688,17 +688,28 @@ out:
 	return ret;
 }
 
-static void wl12xx_top_reg_write(struct wl1271 *wl, int addr, u16 val)
+static int wl12xx_top_reg_write(struct wl1271 *wl, int addr, u16 val)
 {
+	int ret;
+
 	/* write address >> 1 + 0x30000 to OCP_POR_CTR */
 	addr = (addr >> 1) + 0x30000;
-	wl1271_write32(wl, WL12XX_OCP_POR_CTR, addr);
+	ret = wlcore_write32(wl, WL12XX_OCP_POR_CTR, addr);
+	if (ret < 0)
+		goto out;
 
 	/* write value to OCP_POR_WDATA */
-	wl1271_write32(wl, WL12XX_OCP_DATA_WRITE, val);
+	ret = wlcore_write32(wl, WL12XX_OCP_DATA_WRITE, val);
+	if (ret < 0)
+		goto out;
 
 	/* write 1 to OCP_CMD */
-	wl1271_write32(wl, WL12XX_OCP_CMD, OCP_CMD_WRITE);
+	ret = wlcore_write32(wl, WL12XX_OCP_CMD, OCP_CMD_WRITE);
+	if (ret < 0)
+		goto out;
+
+out:
+	return ret;
 }
 
 static int wl12xx_top_reg_read(struct wl1271 *wl, int addr, u16 *out)
@@ -709,10 +720,14 @@ static int wl12xx_top_reg_read(struct wl1271 *wl, int addr, u16 *out)
 
 	/* write address >> 1 + 0x30000 to OCP_POR_CTR */
 	addr = (addr >> 1) + 0x30000;
-	wl1271_write32(wl, WL12XX_OCP_POR_CTR, addr);
+	ret = wlcore_write32(wl, WL12XX_OCP_POR_CTR, addr);
+	if (ret < 0)
+		return ret;
 
 	/* write 2 to OCP_CMD */
-	wl1271_write32(wl, WL12XX_OCP_CMD, OCP_CMD_READ);
+	ret = wlcore_write32(wl, WL12XX_OCP_CMD, OCP_CMD_READ);
+	if (ret < 0)
+		return ret;
 
 	/* poll for data ready */
 	do {
@@ -751,11 +766,15 @@ static int wl128x_switch_tcxo_to_fref(struct wl1271 *wl)
 	if (spare_reg == 0xFFFF)
 		return -EFAULT;
 	spare_reg |= (BIT(3) | BIT(5) | BIT(6));
-	wl12xx_top_reg_write(wl, WL_SPARE_REG, spare_reg);
+	ret = wl12xx_top_reg_write(wl, WL_SPARE_REG, spare_reg);
+	if (ret < 0)
+		return ret;
 
 	/* Enable FREF_CLK_REQ & mux MCS and coex PLLs to FREF */
-	wl12xx_top_reg_write(wl, SYS_CLK_CFG_REG,
-			     WL_CLK_REQ_TYPE_PG2 | MCS_PLL_CLK_SEL_FREF);
+	ret = wl12xx_top_reg_write(wl, SYS_CLK_CFG_REG,
+				   WL_CLK_REQ_TYPE_PG2 | MCS_PLL_CLK_SEL_FREF);
+	if (ret < 0)
+		return ret;
 
 	/* Delay execution for 15msec, to let the HW settle */
 	mdelay(15);
@@ -795,11 +814,21 @@ static bool wl128x_is_fref_valid(struct wl1271 *wl)
 
 static int wl128x_manually_configure_mcs_pll(struct wl1271 *wl)
 {
-	wl12xx_top_reg_write(wl, MCS_PLL_M_REG, MCS_PLL_M_REG_VAL);
-	wl12xx_top_reg_write(wl, MCS_PLL_N_REG, MCS_PLL_N_REG_VAL);
-	wl12xx_top_reg_write(wl, MCS_PLL_CONFIG_REG, MCS_PLL_CONFIG_REG_VAL);
+	int ret;
 
-	return 0;
+	ret = wl12xx_top_reg_write(wl, MCS_PLL_M_REG, MCS_PLL_M_REG_VAL);
+	if (ret < 0)
+		goto out;
+
+	ret = wl12xx_top_reg_write(wl, MCS_PLL_N_REG, MCS_PLL_N_REG_VAL);
+	if (ret < 0)
+		goto out;
+
+	ret = wl12xx_top_reg_write(wl, MCS_PLL_CONFIG_REG,
+				   MCS_PLL_CONFIG_REG_VAL);
+
+out:
+	return ret;
 }
 
 static int wl128x_configure_mcs_pll(struct wl1271 *wl, int clk)
@@ -818,7 +847,9 @@ static int wl128x_configure_mcs_pll(struct wl1271 *wl, int clk)
 	if (spare_reg == 0xFFFF)
 		return -EFAULT;
 	spare_reg |= BIT(2);
-	wl12xx_top_reg_write(wl, WL_SPARE_REG, spare_reg);
+	ret = wl12xx_top_reg_write(wl, WL_SPARE_REG, spare_reg);
+	if (ret < 0)
+		return ret;
 
 	/* Handle special cases of the TCXO clock */
 	if (priv->tcxo_clock == WL12XX_TCXOCLOCK_16_8 ||
@@ -836,9 +867,9 @@ static int wl128x_configure_mcs_pll(struct wl1271 *wl, int clk)
 		return -EFAULT;
 	pll_config |= (input_freq << MCS_SEL_IN_FREQ_SHIFT);
 	pll_config |= MCS_PLL_ENABLE_HP;
-	wl12xx_top_reg_write(wl, MCS_PLL_CONFIG_REG, pll_config);
+	ret = wl12xx_top_reg_write(wl, MCS_PLL_CONFIG_REG, pll_config);
 
-	return 0;
+	return ret;
 }
 
 /*
@@ -927,7 +958,9 @@ static int wl127x_boot_clk(struct wl1271 *wl)
 			goto out;
 
 		val &= FREF_CLK_TYPE_BITS;
-		wl12xx_top_reg_write(wl, OCP_REG_CLK_TYPE, val);
+		ret = wl12xx_top_reg_write(wl, OCP_REG_CLK_TYPE, val);
+		if (ret < 0)
+			goto out;
 
 		/* Set clock pull mode (no pull) */
 		ret = wl12xx_top_reg_read(wl, OCP_REG_CLK_PULL, &val);
@@ -935,7 +968,9 @@ static int wl127x_boot_clk(struct wl1271 *wl)
 			goto out;
 
 		val |= NO_PULL;
-		wl12xx_top_reg_write(wl, OCP_REG_CLK_PULL, val);
+		ret = wl12xx_top_reg_write(wl, OCP_REG_CLK_PULL, val);
+		if (ret < 0)
+			goto out;
 	} else {
 		u16 val;
 		/* Set clock polarity */
@@ -945,10 +980,14 @@ static int wl127x_boot_clk(struct wl1271 *wl)
 
 		val &= FREF_CLK_POLARITY_BITS;
 		val |= CLK_REQ_OUTN_SEL;
-		wl12xx_top_reg_write(wl, OCP_REG_CLK_POLARITY, val);
+		ret = wl12xx_top_reg_write(wl, OCP_REG_CLK_POLARITY, val);
+		if (ret < 0)
+			goto out;
 	}
 
-	wl1271_write32(wl, WL12XX_PLL_PARAMETERS, clk);
+	ret = wlcore_write32(wl, WL12XX_PLL_PARAMETERS, clk);
+	if (ret < 0)
+		goto out;
 
 	ret = wlcore_read32(wl, WL12XX_PLL_PARAMETERS, &pause);
 	if (ret < 0)
@@ -958,7 +997,7 @@ static int wl127x_boot_clk(struct wl1271 *wl)
 
 	pause &= ~(WU_COUNTER_PAUSE_VAL);
 	pause |= WU_COUNTER_PAUSE_VAL;
-	wl1271_write32(wl, WL12XX_WU_COUNTER_PAUSE, pause);
+	ret = wlcore_write32(wl, WL12XX_WU_COUNTER_PAUSE, pause);
 
 out:
 	return ret;
@@ -971,7 +1010,9 @@ static int wl1271_boot_soft_reset(struct wl1271 *wl)
 	int ret = 0;
 
 	/* perform soft reset */
-	wl1271_write32(wl, WL12XX_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);
+	ret = wlcore_write32(wl, WL12XX_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);
+	if (ret < 0)
+		goto out;
 
 	/* SOFT_RESET is self clearing */
 	timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME);
@@ -995,10 +1036,12 @@ static int wl1271_boot_soft_reset(struct wl1271 *wl)
 	}
 
 	/* disable Rx/Tx */
-	wl1271_write32(wl, WL12XX_ENABLE, 0x0);
+	ret = wlcore_write32(wl, WL12XX_ENABLE, 0x0);
+	if (ret < 0)
+		goto out;
 
 	/* disable auto calibration on start*/
-	wl1271_write32(wl, WL12XX_SPARE_A2, 0xffff);
+	ret = wlcore_write32(wl, WL12XX_SPARE_A2, 0xffff);
 
 out:
 	return ret;
@@ -1022,10 +1065,15 @@ static int wl12xx_pre_boot(struct wl1271 *wl)
 	}
 
 	/* Continue the ELP wake up sequence */
-	wl1271_write32(wl, WL12XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
+	ret = wlcore_write32(wl, WL12XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
+	if (ret < 0)
+		goto out;
+
 	udelay(500);
 
-	wlcore_set_partition(wl, &wl->ptable[PART_DRPW]);
+	ret = wlcore_set_partition(wl, &wl->ptable[PART_DRPW]);
+	if (ret < 0)
+		goto out;
 
 	/* Read-modify-write DRPW_SCRATCH_START register (see next state)
 	   to be used by DRPw FW. The RTRIM value will be added by the FW
@@ -1042,12 +1090,18 @@ static int wl12xx_pre_boot(struct wl1271 *wl)
 	else
 		clk |= (priv->ref_clock << 1) << 4;
 
-	wl1271_write32(wl, WL12XX_DRPW_SCRATCH_START, clk);
+	ret = wlcore_write32(wl, WL12XX_DRPW_SCRATCH_START, clk);
+	if (ret < 0)
+		goto out;
 
-	wlcore_set_partition(wl, &wl->ptable[PART_WORK]);
+	ret = wlcore_set_partition(wl, &wl->ptable[PART_WORK]);
+	if (ret < 0)
+		goto out;
 
 	/* Disable interrupts */
-	wlcore_write_reg(wl, REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
+	ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
+	if (ret < 0)
+		goto out;
 
 	ret = wl1271_boot_soft_reset(wl);
 	if (ret < 0)
@@ -1067,7 +1121,9 @@ static int wl12xx_pre_upload(struct wl1271 *wl)
 	 * ACX_EEPROMLESS_IND_REG */
 	wl1271_debug(DEBUG_BOOT, "ACX_EEPROMLESS_IND_REG");
 
-	wl1271_write32(wl, WL12XX_EEPROMLESS_IND, WL12XX_EEPROMLESS_IND);
+	ret = wlcore_write32(wl, WL12XX_EEPROMLESS_IND, WL12XX_EEPROMLESS_IND);
+	if (ret < 0)
+		goto out;
 
 	ret = wlcore_read_reg(wl, REG_CHIP_ID_B, &tmp);
 	if (ret < 0)
@@ -1083,8 +1139,11 @@ static int wl12xx_pre_upload(struct wl1271 *wl)
 	/* WL1271: The reference driver skips steps 7 to 10 (jumps directly
 	 * to upload_fw) */
 
-	if (wl->chip.id == CHIP_ID_1283_PG20)
-		wl12xx_top_reg_write(wl, SDIO_IO_DS, HCI_IO_DS_6MA);
+	if (wl->chip.id == CHIP_ID_1283_PG20) {
+		ret = wl12xx_top_reg_write(wl, SDIO_IO_DS, HCI_IO_DS_6MA);
+		if (ret < 0)
+			goto out;
+	}
 
 	/* polarity must be set before the firmware is loaded */
 	ret = wl12xx_top_reg_read(wl, OCP_REG_POLARITY, &polarity);
@@ -1093,21 +1152,31 @@ static int wl12xx_pre_upload(struct wl1271 *wl)
 
 	/* We use HIGH polarity, so unset the LOW bit */
 	polarity &= ~POLARITY_LOW;
-	wl12xx_top_reg_write(wl, OCP_REG_POLARITY, polarity);
+	ret = wl12xx_top_reg_write(wl, OCP_REG_POLARITY, polarity);
 
 out:
 	return ret;
 }
 
-static void wl12xx_enable_interrupts(struct wl1271 *wl)
+static int wl12xx_enable_interrupts(struct wl1271 *wl)
 {
-	wlcore_write_reg(wl, REG_INTERRUPT_MASK, WL12XX_ACX_ALL_EVENTS_VECTOR);
+	int ret;
+
+	ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK,
+			       WL12XX_ACX_ALL_EVENTS_VECTOR);
+	if (ret < 0)
+		goto out;
 
 	wlcore_enable_interrupts(wl);
-	wlcore_write_reg(wl, REG_INTERRUPT_MASK,
-			 WL1271_ACX_INTR_ALL & ~(WL12XX_INTR_MASK));
+	ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK,
+			       WL1271_ACX_INTR_ALL & ~(WL12XX_INTR_MASK));
+	if (ret < 0)
+		goto out;
+
+	ret = wlcore_write32(wl, WL12XX_HI_CFG, HI_CFG_DEF_VAL);
 
-	wl1271_write32(wl, WL12XX_HI_CFG, HI_CFG_DEF_VAL);
+out:
+	return ret;
 }
 
 static int wl12xx_boot(struct wl1271 *wl)
@@ -1134,7 +1203,7 @@ static int wl12xx_boot(struct wl1271 *wl)
 	if (ret < 0)
 		goto out;
 
-	wl12xx_enable_interrupts(wl);
+	ret = wl12xx_enable_interrupts(wl);
 
 out:
 	return ret;
@@ -1149,14 +1218,15 @@ static int wl12xx_trigger_cmd(struct wl1271 *wl, int cmd_box_addr,
 	if (ret < 0)
 		return ret;
 
-	wlcore_write_reg(wl, REG_INTERRUPT_TRIG, WL12XX_INTR_TRIG_CMD);
+	ret = wlcore_write_reg(wl, REG_INTERRUPT_TRIG, WL12XX_INTR_TRIG_CMD);
 
 	return ret;
 }
 
-static void wl12xx_ack_event(struct wl1271 *wl)
+static int wl12xx_ack_event(struct wl1271 *wl)
 {
-	wlcore_write_reg(wl, REG_INTERRUPT_TRIG, WL12XX_INTR_TRIG_EVENT_ACK);
+	return wlcore_write_reg(wl, REG_INTERRUPT_TRIG,
+				WL12XX_INTR_TRIG_EVENT_ACK);
 }
 
 static u32 wl12xx_calc_tx_blocks(struct wl1271 *wl, u32 len, u32 spare_blks)
@@ -1348,7 +1418,9 @@ static int wl12xx_get_fuse_mac(struct wl1271 *wl)
 	u32 mac1, mac2;
 	int ret;
 
-	wlcore_set_partition(wl, &wl->ptable[PART_DRPW]);
+	ret = wlcore_set_partition(wl, &wl->ptable[PART_DRPW]);
+	if (ret < 0)
+		goto out;
 
 	ret = wlcore_read32(wl, WL12XX_REG_FUSE_BD_ADDR_1, &mac1);
 	if (ret < 0)
@@ -1363,7 +1435,7 @@ static int wl12xx_get_fuse_mac(struct wl1271 *wl)
 		((mac1 & 0xff000000) >> 24);
 	wl->fuse_nic_addr = mac1 & 0xffffff;
 
-	wlcore_set_partition(wl, &wl->ptable[PART_DOWN]);
+	ret = wlcore_set_partition(wl, &wl->ptable[PART_DOWN]);
 
 out:
 	return ret;
diff --git a/drivers/net/wireless/ti/wl18xx/io.c b/drivers/net/wireless/ti/wl18xx/io.c
index 92c2c03..0c06ccf 100644
--- a/drivers/net/wireless/ti/wl18xx/io.c
+++ b/drivers/net/wireless/ti/wl18xx/io.c
@@ -38,14 +38,14 @@ int wl18xx_top_reg_write(struct wl1271 *wl, int addr, u16 val)
 			goto out;
 
 		tmp = (tmp & 0xffff0000) | val;
-		wl1271_write32(wl, addr, tmp);
+		ret = wlcore_write32(wl, addr, tmp);
 	} else {
 		ret = wlcore_read32(wl, addr - 2, &tmp);
 		if (ret < 0)
 			goto out;
 
 		tmp = (tmp & 0xffff) | (val << 16);
-		wl1271_write32(wl, addr - 2, tmp);
+		ret = wlcore_write32(wl, addr - 2, tmp);
 	}
 
 out:
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index f99f003..c25b960 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -641,7 +641,9 @@ static int wl18xx_set_clk(struct wl1271 *wl)
 	u16 clk_freq;
 	int ret;
 
-	wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]);
+	ret = wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]);
+	if (ret < 0)
+		goto out;
 
 	/* TODO: PG2: apparently we need to read the clk type */
 
@@ -699,13 +701,20 @@ out:
 	return ret;
 }
 
-static void wl18xx_boot_soft_reset(struct wl1271 *wl)
+static int wl18xx_boot_soft_reset(struct wl1271 *wl)
 {
+	int ret;
+
 	/* disable Rx/Tx */
-	wl1271_write32(wl, WL18XX_ENABLE, 0x0);
+	ret = wlcore_write32(wl, WL18XX_ENABLE, 0x0);
+	if (ret < 0)
+		goto out;
 
 	/* disable auto calibration on start*/
-	wl1271_write32(wl, WL18XX_SPARE_A2, 0xffff);
+	ret = wlcore_write32(wl, WL18XX_SPARE_A2, 0xffff);
+
+out:
+	return ret;
 }
 
 static int wl18xx_pre_boot(struct wl1271 *wl)
@@ -717,15 +726,22 @@ static int wl18xx_pre_boot(struct wl1271 *wl)
 		goto out;
 
 	/* Continue the ELP wake up sequence */
-	wl1271_write32(wl, WL18XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
+	ret = wlcore_write32(wl, WL18XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
+	if (ret < 0)
+		goto out;
+
 	udelay(500);
 
-	wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
+	ret = wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
+	if (ret < 0)
+		goto out;
 
 	/* Disable interrupts */
-	wlcore_write_reg(wl, REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
+	ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
+	if (ret < 0)
+		goto out;
 
-	wl18xx_boot_soft_reset(wl);
+	ret = wl18xx_boot_soft_reset(wl);
 
 out:
 	return ret;
@@ -736,10 +752,14 @@ static int wl18xx_pre_upload(struct wl1271 *wl)
 	u32 tmp;
 	int ret;
 
-	wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
+	ret = wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
+	if (ret < 0)
+		goto out;
 
 	/* TODO: check if this is all needed */
-	wl1271_write32(wl, WL18XX_EEPROMLESS_IND, WL18XX_EEPROMLESS_IND);
+	ret = wlcore_write32(wl, WL18XX_EEPROMLESS_IND, WL18XX_EEPROMLESS_IND);
+	if (ret < 0)
+		goto out;
 
 	ret = wlcore_read_reg(wl, REG_CHIP_ID_B, &tmp);
 	if (ret < 0)
@@ -765,16 +785,21 @@ static int wl18xx_set_mac_and_phy(struct wl1271 *wl)
 	else
 		len = sizeof(struct wl18xx_mac_and_phy_params);
 
-	wlcore_set_partition(wl, &wl->ptable[PART_PHY_INIT]);
+	ret = wlcore_set_partition(wl, &wl->ptable[PART_PHY_INIT]);
+	if (ret < 0)
+		goto out;
+
 	ret = wlcore_write(wl, WL18XX_PHY_INIT_MEM_ADDR, (u8 *)&priv->conf.phy,
 			   len, false);
 
+out:
 	return ret;
 }
 
-static void wl18xx_enable_interrupts(struct wl1271 *wl)
+static int wl18xx_enable_interrupts(struct wl1271 *wl)
 {
 	u32 event_mask, intr_mask;
+	int ret;
 
 	if (wl->chip.id == CHIP_ID_185x_PG10) {
 		event_mask = WL18XX_ACX_EVENTS_VECTOR_PG1;
@@ -784,11 +809,17 @@ static void wl18xx_enable_interrupts(struct wl1271 *wl)
 		intr_mask = WL18XX_INTR_MASK_PG2;
 	}
 
-	wlcore_write_reg(wl, REG_INTERRUPT_MASK, event_mask);
+	ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK, event_mask);
+	if (ret < 0)
+		goto out;
 
 	wlcore_enable_interrupts(wl);
-	wlcore_write_reg(wl, REG_INTERRUPT_MASK,
-			 WL1271_ACX_INTR_ALL & ~intr_mask);
+
+	ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK,
+			       WL1271_ACX_INTR_ALL & ~intr_mask);
+
+out:
+	return ret;
 }
 
 static int wl18xx_boot(struct wl1271 *wl)
@@ -815,7 +846,7 @@ static int wl18xx_boot(struct wl1271 *wl)
 	if (ret < 0)
 		goto out;
 
-	wl18xx_enable_interrupts(wl);
+	ret = wl18xx_enable_interrupts(wl);
 
 out:
 	return ret;
@@ -833,9 +864,10 @@ static int wl18xx_trigger_cmd(struct wl1271 *wl, int cmd_box_addr,
 			    WL18XX_CMD_MAX_SIZE, false);
 }
 
-static void wl18xx_ack_event(struct wl1271 *wl)
+static int wl18xx_ack_event(struct wl1271 *wl)
 {
-	wlcore_write_reg(wl, REG_INTERRUPT_TRIG, WL18XX_INTR_TRIG_EVENT_ACK);
+	return wlcore_write_reg(wl, REG_INTERRUPT_TRIG,
+				WL18XX_INTR_TRIG_EVENT_ACK);
 }
 
 static u32 wl18xx_calc_tx_blocks(struct wl1271 *wl, u32 len, u32 spare_blks)
@@ -1038,7 +1070,9 @@ static int wl18xx_get_pg_ver(struct wl1271 *wl, s8 *ver)
 	u32 fuse;
 	int ret;
 
-	wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]);
+	ret = wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]);
+	if (ret < 0)
+		goto out;
 
 	ret = wlcore_read32(wl, WL18XX_REG_FUSE_DATA_1_3, &fuse);
 	if (ret < 0)
@@ -1047,7 +1081,7 @@ static int wl18xx_get_pg_ver(struct wl1271 *wl, s8 *ver)
 	if (ver)
 		*ver = (fuse & WL18XX_PG_VER_MASK) >> WL18XX_PG_VER_OFFSET;
 
-	wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
+	ret = wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
 
 out:
 	return ret;
@@ -1116,7 +1150,11 @@ out:
 
 static int wl18xx_plt_init(struct wl1271 *wl)
 {
-	wl1271_write32(wl, WL18XX_SCR_PAD8, WL18XX_SCR_PAD8_PLT);
+	int ret;
+
+	ret = wlcore_write32(wl, WL18XX_SCR_PAD8, WL18XX_SCR_PAD8_PLT);
+	if (ret < 0)
+		return ret;
 
 	return wl->ops->boot(wl);
 }
@@ -1126,7 +1164,9 @@ static int wl18xx_get_mac(struct wl1271 *wl)
 	u32 mac1, mac2;
 	int ret;
 
-	wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]);
+	ret = wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]);
+	if (ret < 0)
+		goto out;
 
 	ret = wlcore_read32(wl, WL18XX_REG_FUSE_BD_ADDR_1, &mac1);
 	if (ret < 0)
@@ -1141,7 +1181,7 @@ static int wl18xx_get_mac(struct wl1271 *wl)
 		((mac1 & 0xff000000) >> 24);
 	wl->fuse_nic_addr = (mac1 & 0xffffff);
 
-	wlcore_set_partition(wl, &wl->ptable[PART_DOWN]);
+	ret = wlcore_set_partition(wl, &wl->ptable[PART_DOWN]);
 
 out:
 	return ret;
diff --git a/drivers/net/wireless/ti/wlcore/boot.c b/drivers/net/wireless/ti/wlcore/boot.c
index 0aa0e29..8965960 100644
--- a/drivers/net/wireless/ti/wlcore/boot.c
+++ b/drivers/net/wireless/ti/wlcore/boot.c
@@ -45,7 +45,7 @@ static int wl1271_boot_set_ecpu_ctrl(struct wl1271 *wl, u32 flag)
 
 	/* 10.5.1 run the firmware (II) */
 	cpu_ctrl |= flag;
-	wlcore_write_reg(wl, REG_ECPU_CONTROL, cpu_ctrl);
+	ret = wlcore_write_reg(wl, REG_ECPU_CONTROL, cpu_ctrl);
 
 out:
 	return ret;
@@ -139,7 +139,9 @@ static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf,
 
 	memcpy(&partition, &wl->ptable[PART_DOWN], sizeof(partition));
 	partition.mem.start = dest;
-	wlcore_set_partition(wl, &partition);
+	ret = wlcore_set_partition(wl, &partition);
+	if (ret < 0)
+		return ret;
 
 	/* 10.1 set partition limit and chunk num */
 	chunk_num = 0;
@@ -153,7 +155,9 @@ static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf,
 			partition_limit = chunk_num * CHUNK_SIZE +
 				wl->ptable[PART_DOWN].mem.size;
 			partition.mem.start = addr;
-			wlcore_set_partition(wl, &partition);
+			ret = wlcore_set_partition(wl, &partition);
+			if (ret < 0)
+				return ret;
 		}
 
 		/* 10.3 upload the chunk */
@@ -320,7 +324,9 @@ int wlcore_boot_upload_nvs(struct wl1271 *wl)
 			wl1271_debug(DEBUG_BOOT,
 				     "nvs burst write 0x%x: 0x%x",
 				     dest_addr, val);
-			wl1271_write32(wl, dest_addr, val);
+			ret = wlcore_write32(wl, dest_addr, val);
+			if (ret < 0)
+				return ret;
 
 			nvs_ptr += 4;
 			dest_addr += 4;
@@ -346,7 +352,9 @@ int wlcore_boot_upload_nvs(struct wl1271 *wl)
 	nvs_len -= nvs_ptr - (u8 *)wl->nvs;
 
 	/* Now we must set the partition correctly */
-	wlcore_set_partition(wl, &wl->ptable[PART_WORK]);
+	ret = wlcore_set_partition(wl, &wl->ptable[PART_WORK]);
+	if (ret < 0)
+		return ret;
 
 	/* Copy the NVS tables to a new block to ensure alignment */
 	nvs_aligned = kmemdup(nvs_ptr, nvs_len, GFP_KERNEL);
@@ -372,7 +380,9 @@ int wlcore_boot_run_firmware(struct wl1271 *wl)
 	u32 chip_id, intr;
 
 	/* Make sure we have the boot partition */
-	wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
+	ret = wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
+	if (ret < 0)
+		return ret;
 
 	ret = wl1271_boot_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
 	if (ret < 0)
@@ -404,8 +414,10 @@ int wlcore_boot_run_firmware(struct wl1271 *wl)
 		}
 		/* check that ACX_INTR_INIT_COMPLETE is enabled */
 		else if (intr & WL1271_ACX_INTR_INIT_COMPLETE) {
-			wlcore_write_reg(wl, REG_INTERRUPT_ACK,
-					 WL1271_ACX_INTR_INIT_COMPLETE);
+			ret = wlcore_write_reg(wl, REG_INTERRUPT_ACK,
+					       WL1271_ACX_INTR_INIT_COMPLETE);
+			if (ret < 0)
+				return ret;
 			break;
 		}
 	}
@@ -469,9 +481,9 @@ int wlcore_boot_run_firmware(struct wl1271 *wl)
 	}
 
 	/* set the working partition to its "running" mode offset */
-	wlcore_set_partition(wl, &wl->ptable[PART_WORK]);
+	ret = wlcore_set_partition(wl, &wl->ptable[PART_WORK]);
 
 	/* firmware startup completed */
-	return 0;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(wlcore_boot_run_firmware);
diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c
index f2ac982..84dd808 100644
--- a/drivers/net/wireless/ti/wlcore/cmd.c
+++ b/drivers/net/wireless/ti/wlcore/cmd.c
@@ -116,7 +116,11 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
 		goto fail;
 	}
 
-	wlcore_write_reg(wl, REG_INTERRUPT_ACK, WL1271_ACX_INTR_CMD_COMPLETE);
+	ret = wlcore_write_reg(wl, REG_INTERRUPT_ACK,
+			       WL1271_ACX_INTR_CMD_COMPLETE);
+	if (ret < 0)
+		goto fail;
+
 	return 0;
 
 fail:
diff --git a/drivers/net/wireless/ti/wlcore/event.c b/drivers/net/wireless/ti/wlcore/event.c
index 123d26d..4890705 100644
--- a/drivers/net/wireless/ti/wlcore/event.c
+++ b/drivers/net/wireless/ti/wlcore/event.c
@@ -318,7 +318,7 @@ int wl1271_event_handle(struct wl1271 *wl, u8 mbox_num)
 	 * TODO: we just need this because one bit is in a different
 	 * place.  Is there any better way?
 	 */
-	wl->ops->ack_event(wl);
+	ret = wl->ops->ack_event(wl);
 
-	return 0;
+	return ret;
 }
diff --git a/drivers/net/wireless/ti/wlcore/io.c b/drivers/net/wireless/ti/wlcore/io.c
index 62d6573..9976219 100644
--- a/drivers/net/wireless/ti/wlcore/io.c
+++ b/drivers/net/wireless/ti/wlcore/io.c
@@ -128,9 +128,11 @@ EXPORT_SYMBOL_GPL(wlcore_translate_addr);
  *                                    |    |
  *
  */
-void wlcore_set_partition(struct wl1271 *wl,
-			  const struct wlcore_partition_set *p)
+int wlcore_set_partition(struct wl1271 *wl,
+			 const struct wlcore_partition_set *p)
 {
+	int ret;
+
 	/* copy partition info */
 	memcpy(&wl->curr_part, p, sizeof(*p));
 
@@ -143,28 +145,41 @@ void wlcore_set_partition(struct wl1271 *wl,
 	wl1271_debug(DEBUG_IO, "mem3_start %08X mem3_size %08X",
 		     p->mem3.start, p->mem3.size);
 
-	wl1271_raw_write32(wl, HW_PART0_START_ADDR, p->mem.start);
-	wl1271_raw_write32(wl, HW_PART0_SIZE_ADDR, p->mem.size);
-	wl1271_raw_write32(wl, HW_PART1_START_ADDR, p->reg.start);
-	wl1271_raw_write32(wl, HW_PART1_SIZE_ADDR, p->reg.size);
-	wl1271_raw_write32(wl, HW_PART2_START_ADDR, p->mem2.start);
-	wl1271_raw_write32(wl, HW_PART2_SIZE_ADDR, p->mem2.size);
+	ret = wlcore_raw_write32(wl, HW_PART0_START_ADDR, p->mem.start);
+	if (ret < 0)
+		goto out;
+
+	ret = wlcore_raw_write32(wl, HW_PART0_SIZE_ADDR, p->mem.size);
+	if (ret < 0)
+		goto out;
+
+	ret = wlcore_raw_write32(wl, HW_PART1_START_ADDR, p->reg.start);
+	if (ret < 0)
+		goto out;
+
+	ret = wlcore_raw_write32(wl, HW_PART1_SIZE_ADDR, p->reg.size);
+	if (ret < 0)
+		goto out;
+
+	ret = wlcore_raw_write32(wl, HW_PART2_START_ADDR, p->mem2.start);
+	if (ret < 0)
+		goto out;
+
+	ret = wlcore_raw_write32(wl, HW_PART2_SIZE_ADDR, p->mem2.size);
+	if (ret < 0)
+		goto out;
+
 	/*
 	 * We don't need the size of the last partition, as it is
 	 * automatically calculated based on the total memory size and
 	 * the sizes of the previous partitions.
 	 */
-	wl1271_raw_write32(wl, HW_PART3_START_ADDR, p->mem3.start);
-}
-EXPORT_SYMBOL_GPL(wlcore_set_partition);
+	ret = wlcore_raw_write32(wl, HW_PART3_START_ADDR, p->mem3.start);
 
-void wlcore_select_partition(struct wl1271 *wl, u8 part)
-{
-	wl1271_debug(DEBUG_IO, "setting partition %d", part);
-
-	wlcore_set_partition(wl, &wl->ptable[part]);
+out:
+	return ret;
 }
-EXPORT_SYMBOL_GPL(wlcore_select_partition);
+EXPORT_SYMBOL_GPL(wlcore_set_partition);
 
 void wl1271_io_reset(struct wl1271 *wl)
 {
diff --git a/drivers/net/wireless/ti/wlcore/io.h b/drivers/net/wireless/ti/wlcore/io.h
index 0395b03..5e4a3d1 100644
--- a/drivers/net/wireless/ti/wlcore/io.h
+++ b/drivers/net/wireless/ti/wlcore/io.h
@@ -92,11 +92,11 @@ static inline int wlcore_raw_read32(struct wl1271 *wl, int addr, u32 *val)
 	return 0;
 }
 
-static inline void wl1271_raw_write32(struct wl1271 *wl, int addr, u32 val)
+static inline int wlcore_raw_write32(struct wl1271 *wl, int addr, u32 val)
 {
 	wl->buffer_32 = cpu_to_le32(val);
-	wlcore_raw_write(wl, addr, &wl->buffer_32,
-			     sizeof(wl->buffer_32), false);
+	return wlcore_raw_write(wl, addr, &wl->buffer_32,
+				sizeof(wl->buffer_32), false);
 }
 
 static inline int wlcore_read(struct wl1271 *wl, int addr, void *buf,
@@ -150,9 +150,9 @@ static inline int wlcore_read32(struct wl1271 *wl, int addr, u32 *val)
 	return wlcore_raw_read32(wl, wlcore_translate_addr(wl, addr), val);
 }
 
-static inline void wl1271_write32(struct wl1271 *wl, int addr, u32 val)
+static inline int wlcore_write32(struct wl1271 *wl, int addr, u32 val)
 {
-	wl1271_raw_write32(wl, wlcore_translate_addr(wl, addr), val);
+	return wlcore_raw_write32(wl, wlcore_translate_addr(wl, addr), val);
 }
 
 static inline int wlcore_read_reg(struct wl1271 *wl, int reg, u32 *val)
@@ -162,9 +162,11 @@ static inline int wlcore_read_reg(struct wl1271 *wl, int reg, u32 *val)
 				 val);
 }
 
-static inline void wlcore_write_reg(struct wl1271 *wl, int reg, u32 val)
+static inline int wlcore_write_reg(struct wl1271 *wl, int reg, u32 val)
 {
-	wl1271_raw_write32(wl, wlcore_translate_addr(wl, wl->rtable[reg]), val);
+	return wlcore_raw_write32(wl,
+				  wlcore_translate_addr(wl, wl->rtable[reg]),
+				  val);
 }
 
 static inline void wl1271_power_off(struct wl1271 *wl)
@@ -188,8 +190,8 @@ static inline int wl1271_power_on(struct wl1271 *wl)
 	return ret;
 }
 
-void wlcore_set_partition(struct wl1271 *wl,
-			  const struct wlcore_partition_set *p);
+int wlcore_set_partition(struct wl1271 *wl,
+			 const struct wlcore_partition_set *p);
 
 bool wl1271_set_block_size(struct wl1271 *wl);
 
@@ -197,6 +199,4 @@ bool wl1271_set_block_size(struct wl1271 *wl);
 
 int wl1271_tx_dummy_packet(struct wl1271 *wl);
 
-void wlcore_select_partition(struct wl1271 *wl, u8 part);
-
 #endif
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index c16d266..546fcb0 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -882,7 +882,9 @@ static void wlcore_print_recovery(struct wl1271 *wl)
 		    wl->chip.fw_ver_str);
 
 	/* change partitions momentarily so we can read the FW pc */
-	wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
+	ret = wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
+	if (ret < 0)
+		return;
 
 	ret = wlcore_read_reg(wl, REG_PC_ON_RECOVERY, &pc);
 	if (ret < 0)
@@ -967,9 +969,9 @@ out_unlock:
 	mutex_unlock(&wl->mutex);
 }
 
-static void wl1271_fw_wakeup(struct wl1271 *wl)
+static int wlcore_fw_wakeup(struct wl1271 *wl)
 {
-	wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG, ELPCTRL_WAKE_UP);
+	return wlcore_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG, ELPCTRL_WAKE_UP);
 }
 
 static int wl1271_setup(struct wl1271 *wl)
@@ -1005,13 +1007,21 @@ static int wl12xx_set_power_on(struct wl1271 *wl)
 	wl1271_io_reset(wl);
 	wl1271_io_init(wl);
 
-	wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
+	ret = wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
+	if (ret < 0)
+		goto fail;
 
 	/* ELP module wake up */
-	wl1271_fw_wakeup(wl);
+	ret = wlcore_fw_wakeup(wl);
+	if (ret < 0)
+		goto fail;
 
 out:
 	return ret;
+
+fail:
+	wl1271_power_off(wl);
+	return ret;
 }
 
 static int wl12xx_chip_wakeup(struct wl1271 *wl, bool plt)
diff --git a/drivers/net/wireless/ti/wlcore/ps.c b/drivers/net/wireless/ti/wlcore/ps.c
index 95d8797..46d36fd 100644
--- a/drivers/net/wireless/ti/wlcore/ps.c
+++ b/drivers/net/wireless/ti/wlcore/ps.c
@@ -35,6 +35,7 @@ void wl1271_elp_work(struct work_struct *work)
 	struct delayed_work *dwork;
 	struct wl1271 *wl;
 	struct wl12xx_vif *wlvif;
+	int ret;
 
 	dwork = container_of(work, struct delayed_work, work);
 	wl = container_of(dwork, struct wl1271, elp_work);
@@ -63,7 +64,12 @@ void wl1271_elp_work(struct work_struct *work)
 	}
 
 	wl1271_debug(DEBUG_PSM, "chip to elp");
-	wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG, ELPCTRL_SLEEP);
+	ret = wlcore_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG, ELPCTRL_SLEEP);
+	if (ret < 0) {
+		wl12xx_queue_recovery_work(wl);
+		goto out;
+	}
+
 	set_bit(WL1271_FLAG_IN_ELP, &wl->flags);
 
 out:
@@ -135,7 +141,11 @@ int wl1271_ps_elp_wakeup(struct wl1271 *wl)
 		wl->elp_compl = &compl;
 	spin_unlock_irqrestore(&wl->wl_lock, flags);
 
-	wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG, ELPCTRL_WAKE_UP);
+	ret = wlcore_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG, ELPCTRL_WAKE_UP);
+	if (ret < 0) {
+		wl12xx_queue_recovery_work(wl);
+		goto err;
+	}
 
 	if (!pending) {
 		ret = wait_for_completion_timeout(
diff --git a/drivers/net/wireless/ti/wlcore/rx.c b/drivers/net/wireless/ti/wlcore/rx.c
index be24b30..f42b969 100644
--- a/drivers/net/wireless/ti/wlcore/rx.c
+++ b/drivers/net/wireless/ti/wlcore/rx.c
@@ -279,9 +279,12 @@ int wlcore_rx(struct wl1271 *wl, struct wl_fw_status_1 *status)
 	 * Write the driver's packet counter to the FW. This is only required
 	 * for older hardware revisions
 	 */
-	if (wl->quirks & WLCORE_QUIRK_END_OF_TRANSACTION)
-		wl1271_write32(wl, WL12XX_REG_RX_DRIVER_COUNTER,
-			       wl->rx_counter);
+	if (wl->quirks & WLCORE_QUIRK_END_OF_TRANSACTION) {
+		ret = wlcore_write32(wl, WL12XX_REG_RX_DRIVER_COUNTER,
+				     wl->rx_counter);
+		if (ret < 0)
+			goto out;
+	}
 
 	wl12xx_rearm_rx_streaming(wl, active_hlids);
 
diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c
index 90bddf5..b5211be 100644
--- a/drivers/net/wireless/ti/wlcore/tx.c
+++ b/drivers/net/wireless/ti/wlcore/tx.c
@@ -746,9 +746,12 @@ out_ack:
 		 * Interrupt the firmware with the new packets. This is only
 		 * required for older hardware revisions
 		 */
-		if (wl->quirks & WLCORE_QUIRK_END_OF_TRANSACTION)
-			wl1271_write32(wl, WL12XX_HOST_WR_ACCESS,
-				       wl->tx_packets_count);
+		if (wl->quirks & WLCORE_QUIRK_END_OF_TRANSACTION) {
+			ret = wlcore_write32(wl, WL12XX_HOST_WR_ACCESS,
+					     wl->tx_packets_count);
+			if (ret < 0)
+				goto out;
+		}
 
 		wl1271_handle_tx_low_watermark(wl);
 	}
@@ -911,9 +914,11 @@ int wlcore_tx_complete(struct wl1271 *wl)
 	fw_counter = le32_to_cpu(wl->tx_res_if->tx_result_fw_counter);
 
 	/* write host counter to chipset (to ack) */
-	wl1271_write32(wl, le32_to_cpu(memmap->tx_result) +
-		       offsetof(struct wl1271_tx_hw_res_if,
-				tx_result_host_counter), fw_counter);
+	ret = wlcore_write32(wl, le32_to_cpu(memmap->tx_result) +
+			     offsetof(struct wl1271_tx_hw_res_if,
+				      tx_result_host_counter), fw_counter);
+	if (ret < 0)
+		goto out;
 
 	count = fw_counter - wl->tx_results_count;
 	wl1271_debug(DEBUG_TX, "tx_complete received, packets: %d", count);
diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h
index 2fb5374..e796974 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -43,7 +43,7 @@ struct wlcore_ops {
 	int (*plt_init)(struct wl1271 *wl);
 	int (*trigger_cmd)(struct wl1271 *wl, int cmd_box_addr,
 			   void *buf, size_t len);
-	void (*ack_event)(struct wl1271 *wl);
+	int (*ack_event)(struct wl1271 *wl);
 	u32 (*calc_tx_blocks)(struct wl1271 *wl, u32 len, u32 spare_blks);
 	void (*set_tx_desc_blocks)(struct wl1271 *wl,
 				   struct wl1271_tx_hw_descr *desc,
-- 
cgit v1.1


From 2b80040782af56e1b13ad451f593dd4e1875b2b8 Mon Sep 17 00:00:00 2001
From: Ido Yariv <ido@wizery.com>
Date: Mon, 18 Jun 2012 18:15:50 +0300
Subject: wlcore: Propagate errors from wl1271_read_hwaddr

Propagate errors from wl1271_read_hwaddr. This function is only used
when reading the FW log (following a recovery), so don't read the FW log
in case of a bus error.

Also rename prefixes of wlcore functions which their prototypes had to
be changed.

Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/io.h   | 4 ++--
 drivers/net/wireless/ti/wlcore/main.c | 6 ++++--
 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/io.h b/drivers/net/wireless/ti/wlcore/io.h
index 5e4a3d1..4a6688b 100644
--- a/drivers/net/wireless/ti/wlcore/io.h
+++ b/drivers/net/wireless/ti/wlcore/io.h
@@ -131,7 +131,7 @@ static inline int wlcore_read_data(struct wl1271 *wl, int reg, void *buf,
 	return wlcore_read(wl, wl->rtable[reg], buf, len, fixed);
 }
 
-static inline void wl1271_read_hwaddr(struct wl1271 *wl, int hwaddr,
+static inline int wlcore_read_hwaddr(struct wl1271 *wl, int hwaddr,
 				      void *buf, size_t len, bool fixed)
 {
 	int physical;
@@ -142,7 +142,7 @@ static inline void wl1271_read_hwaddr(struct wl1271 *wl, int hwaddr,
 
 	physical = wlcore_translate_addr(wl, addr);
 
-	wlcore_raw_read(wl, physical, buf, len, fixed);
+	return wlcore_raw_read(wl, physical, buf, len, fixed);
 }
 
 static inline int wlcore_read32(struct wl1271 *wl, int addr, u32 *val)
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 546fcb0..b0795aa 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -851,8 +851,10 @@ static void wl12xx_read_fwlog_panic(struct wl1271 *wl)
 	/* Traverse the memory blocks linked list */
 	do {
 		memset(block, 0, WL12XX_HW_BLOCK_SIZE);
-		wl1271_read_hwaddr(wl, addr, block, WL12XX_HW_BLOCK_SIZE,
-				   false);
+		ret = wlcore_read_hwaddr(wl, addr, block, WL12XX_HW_BLOCK_SIZE,
+					 false);
+		if (ret < 0)
+			goto out;
 
 		/*
 		 * Memory blocks are linked to one another. The first 4 bytes
-- 
cgit v1.1


From f1a26e638e646d971f77c5a5186ee254b3f4e818 Mon Sep 17 00:00:00 2001
From: Ido Yariv <ido@wizery.com>
Date: Wed, 20 Jun 2012 00:03:46 +0300
Subject: wlcore: Force checking of io functions' return values

All io functions' return values should be propagated and handled. Add a
__must_check annotation to verify that the return values are checked and
to avoid future mistakes.

Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wl12xx/main.c     |  6 ++-
 drivers/net/wireless/ti/wl18xx/io.h       |  4 +-
 drivers/net/wireless/ti/wlcore/io.h       | 61 +++++++++++++++++++------------
 drivers/net/wireless/ti/wlcore/sdio.c     |  8 ++--
 drivers/net/wireless/ti/wlcore/spi.c      |  8 ++--
 drivers/net/wireless/ti/wlcore/wlcore_i.h |  8 ++--
 6 files changed, 55 insertions(+), 40 deletions(-)

diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index 3a4ab65..47ba2e0 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -688,7 +688,8 @@ out:
 	return ret;
 }
 
-static int wl12xx_top_reg_write(struct wl1271 *wl, int addr, u16 val)
+static int __must_check wl12xx_top_reg_write(struct wl1271 *wl, int addr,
+					     u16 val)
 {
 	int ret;
 
@@ -712,7 +713,8 @@ out:
 	return ret;
 }
 
-static int wl12xx_top_reg_read(struct wl1271 *wl, int addr, u16 *out)
+static int __must_check wl12xx_top_reg_read(struct wl1271 *wl, int addr,
+					    u16 *out)
 {
 	u32 val;
 	int timeout = OCP_CMD_LOOP;
diff --git a/drivers/net/wireless/ti/wl18xx/io.h b/drivers/net/wireless/ti/wl18xx/io.h
index 0e1b8d2..c32ae30 100644
--- a/drivers/net/wireless/ti/wl18xx/io.h
+++ b/drivers/net/wireless/ti/wl18xx/io.h
@@ -22,7 +22,7 @@
 #ifndef __WL18XX_IO_H__
 #define __WL18XX_IO_H__
 
-int wl18xx_top_reg_write(struct wl1271 *wl, int addr, u16 val);
-int wl18xx_top_reg_read(struct wl1271 *wl, int addr, u16 *out);
+int __must_check wl18xx_top_reg_write(struct wl1271 *wl, int addr, u16 val);
+int __must_check wl18xx_top_reg_read(struct wl1271 *wl, int addr, u16 *out);
 
 #endif /* __WL18XX_IO_H__ */
diff --git a/drivers/net/wireless/ti/wlcore/io.h b/drivers/net/wireless/ti/wlcore/io.h
index 4a6688b..1cd545b 100644
--- a/drivers/net/wireless/ti/wlcore/io.h
+++ b/drivers/net/wireless/ti/wlcore/io.h
@@ -53,31 +53,36 @@ void wl1271_io_init(struct wl1271 *wl);
 int wlcore_translate_addr(struct wl1271 *wl, int addr);
 
 /* Raw target IO, address is not translated */
-static inline int wlcore_raw_write(struct wl1271 *wl, int addr, void *buf,
-				   size_t len, bool fixed)
+static inline int __must_check wlcore_raw_write(struct wl1271 *wl, int addr,
+						void *buf, size_t len,
+						bool fixed)
 {
 	return wl->if_ops->write(wl->dev, addr, buf, len, fixed);
 }
 
-static inline int wlcore_raw_read(struct wl1271 *wl, int addr, void *buf,
-				  size_t len, bool fixed)
+static inline int __must_check wlcore_raw_read(struct wl1271 *wl, int addr,
+					       void *buf, size_t len,
+					       bool fixed)
 {
 	return wl->if_ops->read(wl->dev, addr, buf, len, fixed);
 }
 
-static inline int wlcore_raw_read_data(struct wl1271 *wl, int reg, void *buf,
-				       size_t len, bool fixed)
+static inline int __must_check wlcore_raw_read_data(struct wl1271 *wl, int reg,
+						    void *buf, size_t len,
+						    bool fixed)
 {
 	return wlcore_raw_read(wl, wl->rtable[reg], buf, len, fixed);
 }
 
-static inline int wlcore_raw_write_data(struct wl1271 *wl, int reg, void *buf,
-					size_t len, bool fixed)
+static inline int __must_check wlcore_raw_write_data(struct wl1271 *wl, int reg,
+						     void *buf, size_t len,
+						     bool fixed)
 {
 	return wlcore_raw_write(wl, wl->rtable[reg], buf, len, fixed);
 }
 
-static inline int wlcore_raw_read32(struct wl1271 *wl, int addr, u32 *val)
+static inline int __must_check wlcore_raw_read32(struct wl1271 *wl, int addr,
+						 u32 *val)
 {
 	int ret;
 
@@ -92,15 +97,16 @@ static inline int wlcore_raw_read32(struct wl1271 *wl, int addr, u32 *val)
 	return 0;
 }
 
-static inline int wlcore_raw_write32(struct wl1271 *wl, int addr, u32 val)
+static inline int __must_check wlcore_raw_write32(struct wl1271 *wl, int addr,
+						  u32 val)
 {
 	wl->buffer_32 = cpu_to_le32(val);
 	return wlcore_raw_write(wl, addr, &wl->buffer_32,
 				sizeof(wl->buffer_32), false);
 }
 
-static inline int wlcore_read(struct wl1271 *wl, int addr, void *buf,
-			      size_t len, bool fixed)
+static inline int __must_check wlcore_read(struct wl1271 *wl, int addr,
+					   void *buf, size_t len, bool fixed)
 {
 	int physical;
 
@@ -109,8 +115,8 @@ static inline int wlcore_read(struct wl1271 *wl, int addr, void *buf,
 	return wlcore_raw_read(wl, physical, buf, len, fixed);
 }
 
-static inline int wlcore_write(struct wl1271 *wl, int addr, void *buf,
-			       size_t len, bool fixed)
+static inline int __must_check wlcore_write(struct wl1271 *wl, int addr,
+					    void *buf, size_t len, bool fixed)
 {
 	int physical;
 
@@ -119,20 +125,23 @@ static inline int wlcore_write(struct wl1271 *wl, int addr, void *buf,
 	return wlcore_raw_write(wl, physical, buf, len, fixed);
 }
 
-static inline int wlcore_write_data(struct wl1271 *wl, int reg, void *buf,
-				    size_t len, bool fixed)
+static inline int __must_check wlcore_write_data(struct wl1271 *wl, int reg,
+						 void *buf, size_t len,
+						 bool fixed)
 {
 	return wlcore_write(wl, wl->rtable[reg], buf, len, fixed);
 }
 
-static inline int wlcore_read_data(struct wl1271 *wl, int reg, void *buf,
-				    size_t len, bool fixed)
+static inline int __must_check wlcore_read_data(struct wl1271 *wl, int reg,
+						void *buf, size_t len,
+						bool fixed)
 {
 	return wlcore_read(wl, wl->rtable[reg], buf, len, fixed);
 }
 
-static inline int wlcore_read_hwaddr(struct wl1271 *wl, int hwaddr,
-				      void *buf, size_t len, bool fixed)
+static inline int __must_check wlcore_read_hwaddr(struct wl1271 *wl, int hwaddr,
+						  void *buf, size_t len,
+						  bool fixed)
 {
 	int physical;
 	int addr;
@@ -145,24 +154,28 @@ static inline int wlcore_read_hwaddr(struct wl1271 *wl, int hwaddr,
 	return wlcore_raw_read(wl, physical, buf, len, fixed);
 }
 
-static inline int wlcore_read32(struct wl1271 *wl, int addr, u32 *val)
+static inline int __must_check wlcore_read32(struct wl1271 *wl, int addr,
+					     u32 *val)
 {
 	return wlcore_raw_read32(wl, wlcore_translate_addr(wl, addr), val);
 }
 
-static inline int wlcore_write32(struct wl1271 *wl, int addr, u32 val)
+static inline int __must_check wlcore_write32(struct wl1271 *wl, int addr,
+					      u32 val)
 {
 	return wlcore_raw_write32(wl, wlcore_translate_addr(wl, addr), val);
 }
 
-static inline int wlcore_read_reg(struct wl1271 *wl, int reg, u32 *val)
+static inline int __must_check wlcore_read_reg(struct wl1271 *wl, int reg,
+					       u32 *val)
 {
 	return wlcore_raw_read32(wl,
 				 wlcore_translate_addr(wl, wl->rtable[reg]),
 				 val);
 }
 
-static inline int wlcore_write_reg(struct wl1271 *wl, int reg, u32 val)
+static inline int __must_check wlcore_write_reg(struct wl1271 *wl, int reg,
+						u32 val)
 {
 	return wlcore_raw_write32(wl,
 				  wlcore_translate_addr(wl, wl->rtable[reg]),
diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c
index 9069dc9..204e69f 100644
--- a/drivers/net/wireless/ti/wlcore/sdio.c
+++ b/drivers/net/wireless/ti/wlcore/sdio.c
@@ -71,8 +71,8 @@ static void wl1271_sdio_set_block_size(struct device *child,
 	sdio_release_host(func);
 }
 
-static int wl12xx_sdio_raw_read(struct device *child, int addr, void *buf,
-				size_t len, bool fixed)
+static int __must_check wl12xx_sdio_raw_read(struct device *child, int addr,
+					     void *buf, size_t len, bool fixed)
 {
 	int ret;
 	struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent);
@@ -109,8 +109,8 @@ static int wl12xx_sdio_raw_read(struct device *child, int addr, void *buf,
 	return ret;
 }
 
-static int wl12xx_sdio_raw_write(struct device *child, int addr, void *buf,
-				 size_t len, bool fixed)
+static int __must_check wl12xx_sdio_raw_write(struct device *child, int addr,
+					      void *buf, size_t len, bool fixed)
 {
 	int ret;
 	struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent);
diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c
index d6768e9..6420aba 100644
--- a/drivers/net/wireless/ti/wlcore/spi.c
+++ b/drivers/net/wireless/ti/wlcore/spi.c
@@ -193,8 +193,8 @@ static int wl12xx_spi_read_busy(struct device *child)
 	return -ETIMEDOUT;
 }
 
-static int wl12xx_spi_raw_read(struct device *child, int addr, void *buf,
-			       size_t len, bool fixed)
+static int __must_check wl12xx_spi_raw_read(struct device *child, int addr,
+					    void *buf, size_t len, bool fixed)
 {
 	struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
 	struct wl1271 *wl = dev_get_drvdata(child);
@@ -260,8 +260,8 @@ static int wl12xx_spi_raw_read(struct device *child, int addr, void *buf,
 	return 0;
 }
 
-static int wl12xx_spi_raw_write(struct device *child, int addr, void *buf,
-				size_t len, bool fixed)
+static int __must_check wl12xx_spi_raw_write(struct device *child, int addr,
+					     void *buf, size_t len, bool fixed)
 {
 	struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
 	struct spi_transfer t[2 * WSPI_MAX_NUM_OF_CHUNKS];
diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h
index 5ab31ff..e5a34dd 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore_i.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h
@@ -209,10 +209,10 @@ struct wl1271_scan {
 };
 
 struct wl1271_if_operations {
-	int (*read)(struct device *child, int addr, void *buf, size_t len,
-		    bool fixed);
-	int (*write)(struct device *child, int addr, void *buf, size_t len,
-		     bool fixed);
+	int __must_check (*read)(struct device *child, int addr, void *buf,
+				 size_t len, bool fixed);
+	int __must_check (*write)(struct device *child, int addr, void *buf,
+				  size_t len, bool fixed);
 	void (*reset)(struct device *child);
 	void (*init)(struct device *child);
 	int (*power)(struct device *child, bool enable);
-- 
cgit v1.1


From 17efdc4ab8cc2ac959ca1a16c9ab04d8830c4bff Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 22 Jun 2012 11:26:47 +0200
Subject: mac80211: remove TKIP debug

The TKIP code hasn't been changed in a very long
time, so it seems unlikely that anyone really has
a need for the TKIP debug code. Remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/Kconfig | 11 -----------
 net/mac80211/tkip.c  | 43 +------------------------------------------
 2 files changed, 1 insertion(+), 53 deletions(-)

diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig
index 8d249d7..323aa19 100644
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
@@ -152,17 +152,6 @@ config MAC80211_HT_DEBUG
 
 	  Do not select this option.
 
-config MAC80211_TKIP_DEBUG
-	bool "Verbose TKIP debugging"
-	depends on MAC80211_DEBUG_MENU
-	---help---
-	  Selecting this option causes mac80211 to print out
-	  very verbose TKIP debugging messages. It should not
-	  be selected on production systems as those messages
-	  are remotely triggerable.
-
-	  Do not select this option.
-
 config MAC80211_IBSS_DEBUG
 	bool "Verbose IBSS debugging"
 	depends on MAC80211_DEBUG_MENU
diff --git a/net/mac80211/tkip.c b/net/mac80211/tkip.c
index 68be47c..57e14d5 100644
--- a/net/mac80211/tkip.c
+++ b/net/mac80211/tkip.c
@@ -260,16 +260,6 @@ int ieee80211_tkip_decrypt_data(struct crypto_cipher *tfm,
 	keyid = pos[3];
 	iv32 = get_unaligned_le32(pos + 4);
 	pos += 8;
-#ifdef CONFIG_MAC80211_TKIP_DEBUG
-	{
-		int i;
-		pr_debug("TKIP decrypt: data(len=%zd)", payload_len);
-		for (i = 0; i < payload_len; i++)
-			printk(" %02x", payload[i]);
-		printk("\n");
-		pr_debug("TKIP decrypt: iv16=%04x iv32=%08x\n", iv16, iv32);
-	}
-#endif
 
 	if (!(keyid & (1 << 5)))
 		return TKIP_DECRYPT_NO_EXT_IV;
@@ -280,15 +270,8 @@ int ieee80211_tkip_decrypt_data(struct crypto_cipher *tfm,
 	if (key->u.tkip.rx[queue].state != TKIP_STATE_NOT_INIT &&
 	    (iv32 < key->u.tkip.rx[queue].iv32 ||
 	     (iv32 == key->u.tkip.rx[queue].iv32 &&
-	      iv16 <= key->u.tkip.rx[queue].iv16))) {
-#ifdef CONFIG_MAC80211_TKIP_DEBUG
-		pr_debug("TKIP replay detected for RX frame from %pM (RX IV (%04x,%02x) <= prev. IV (%04x,%02x)\n",
-			 ta, iv32, iv16,
-			 key->u.tkip.rx[queue].iv32,
-			 key->u.tkip.rx[queue].iv16);
-#endif
+	      iv16 <= key->u.tkip.rx[queue].iv16)))
 		return TKIP_DECRYPT_REPLAY;
-	}
 
 	if (only_iv) {
 		res = TKIP_DECRYPT_OK;
@@ -300,21 +283,6 @@ int ieee80211_tkip_decrypt_data(struct crypto_cipher *tfm,
 	    key->u.tkip.rx[queue].iv32 != iv32) {
 		/* IV16 wrapped around - perform TKIP phase 1 */
 		tkip_mixing_phase1(tk, &key->u.tkip.rx[queue], ta, iv32);
-#ifdef CONFIG_MAC80211_TKIP_DEBUG
-		{
-			int i;
-			u8 key_offset = NL80211_TKIP_DATA_OFFSET_ENCR_KEY;
-			pr_debug("TKIP decrypt: Phase1 TA=%pM TK=", ta);
-			for (i = 0; i < 16; i++)
-				printk("%02x ",
-				       key->conf.key[key_offset + i]);
-			printk("\n");
-			pr_debug("TKIP decrypt: P1K=");
-			for (i = 0; i < 5; i++)
-				printk("%04x ", key->u.tkip.rx[queue].p1k[i]);
-			printk("\n");
-		}
-#endif
 	}
 	if (key->local->ops->update_tkip_key &&
 	    key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE &&
@@ -330,15 +298,6 @@ int ieee80211_tkip_decrypt_data(struct crypto_cipher *tfm,
 	}
 
 	tkip_mixing_phase2(tk, &key->u.tkip.rx[queue], iv16, rc4key);
-#ifdef CONFIG_MAC80211_TKIP_DEBUG
-	{
-		int i;
-		pr_debug("TKIP decrypt: Phase2 rc4key=");
-		for (i = 0; i < 16; i++)
-			printk("%02x ", rc4key[i]);
-		printk("\n");
-	}
-#endif
 
 	res = ieee80211_wep_decrypt_data(tfm, rc4key, 16, pos, payload_len - 12);
  done:
-- 
cgit v1.1


From 08ce5abe3d0e29a7c8b46c4bec891862941116d7 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 22 Jun 2012 11:37:03 +0200
Subject: mac80211: two small verbose debug cleanups

Two instances of CONFIG_MAC80211_VERBOSE_DEBUG
should be different, fix them.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/ibss.c   | 2 +-
 net/mac80211/status.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index ff46ff4..8931110 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -261,7 +261,7 @@ static struct sta_info *ieee80211_ibss_finish_sta(struct sta_info *sta,
 
 	memcpy(addr, sta->sta.addr, ETH_ALEN);
 
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+#ifdef CONFIG_MAC80211_IBSS_DEBUG
 	wiphy_debug(sdata->local->hw.wiphy,
 		    "Adding new IBSS station %pM (dev=%s)\n",
 		    addr, sdata->name);
diff --git a/net/mac80211/status.c b/net/mac80211/status.c
index 6b4f425..51a6d1e 100644
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -155,7 +155,7 @@ static void ieee80211_handle_filtered_frame(struct ieee80211_local *local,
 		return;
 	}
 
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
 	if (net_ratelimit())
 		wiphy_debug(local->hw.wiphy,
 			    "dropped TX filtered frame, queue_len=%d PS=%d @%lu\n",
-- 
cgit v1.1


From d3b2fb53c7f82903880769d406c11c7e619b11a4 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 22 Jun 2012 12:48:38 +0200
Subject: mac80211: pass sdata to some RX functions

For better debugging, we would like to have
the sdata pointer available later, so pass
it into these functions.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/rx.c | 33 ++++++++++++++++-----------------
 1 file changed, 16 insertions(+), 17 deletions(-)

diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 446a327..9f1bd69 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -554,11 +554,11 @@ static inline u16 seq_sub(u16 sq1, u16 sq2)
 }
 
 
-static void ieee80211_release_reorder_frame(struct ieee80211_hw *hw,
+static void ieee80211_release_reorder_frame(struct ieee80211_sub_if_data *sdata,
 					    struct tid_ampdu_rx *tid_agg_rx,
 					    int index)
 {
-	struct ieee80211_local *local = hw_to_local(hw);
+	struct ieee80211_local *local = sdata->local;
 	struct sk_buff *skb = tid_agg_rx->reorder_buf[index];
 	struct ieee80211_rx_status *status;
 
@@ -578,7 +578,7 @@ no_frame:
 	tid_agg_rx->head_seq_num = seq_inc(tid_agg_rx->head_seq_num);
 }
 
-static void ieee80211_release_reorder_frames(struct ieee80211_hw *hw,
+static void ieee80211_release_reorder_frames(struct ieee80211_sub_if_data *sdata,
 					     struct tid_ampdu_rx *tid_agg_rx,
 					     u16 head_seq_num)
 {
@@ -589,7 +589,7 @@ static void ieee80211_release_reorder_frames(struct ieee80211_hw *hw,
 	while (seq_less(tid_agg_rx->head_seq_num, head_seq_num)) {
 		index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) %
 							tid_agg_rx->buf_size;
-		ieee80211_release_reorder_frame(hw, tid_agg_rx, index);
+		ieee80211_release_reorder_frame(sdata, tid_agg_rx, index);
 	}
 }
 
@@ -604,7 +604,7 @@ static void ieee80211_release_reorder_frames(struct ieee80211_hw *hw,
  */
 #define HT_RX_REORDER_BUF_TIMEOUT (HZ / 10)
 
-static void ieee80211_sta_reorder_release(struct ieee80211_hw *hw,
+static void ieee80211_sta_reorder_release(struct ieee80211_sub_if_data *sdata,
 					  struct tid_ampdu_rx *tid_agg_rx)
 {
 	int index, j;
@@ -634,10 +634,10 @@ static void ieee80211_sta_reorder_release(struct ieee80211_hw *hw,
 
 #ifdef CONFIG_MAC80211_HT_DEBUG
 			if (net_ratelimit())
-				wiphy_debug(hw->wiphy,
+				wiphy_debug(sdata->local->hw.wiphy,
 					    "release an RX reorder frame due to timeout on earlier frames\n");
 #endif
-			ieee80211_release_reorder_frame(hw, tid_agg_rx, j);
+			ieee80211_release_reorder_frame(sdata, tid_agg_rx, j);
 
 			/*
 			 * Increment the head seq# also for the skipped slots.
@@ -647,7 +647,7 @@ static void ieee80211_sta_reorder_release(struct ieee80211_hw *hw,
 			skipped = 0;
 		}
 	} else while (tid_agg_rx->reorder_buf[index]) {
-		ieee80211_release_reorder_frame(hw, tid_agg_rx, index);
+		ieee80211_release_reorder_frame(sdata, tid_agg_rx, index);
 		index =	seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) %
 							tid_agg_rx->buf_size;
 	}
@@ -677,7 +677,7 @@ static void ieee80211_sta_reorder_release(struct ieee80211_hw *hw,
  * rcu_read_lock protection. It returns false if the frame
  * can be processed immediately, true if it was consumed.
  */
-static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
+static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_sub_if_data *sdata,
 					     struct tid_ampdu_rx *tid_agg_rx,
 					     struct sk_buff *skb)
 {
@@ -706,7 +706,8 @@ static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
 	if (!seq_less(mpdu_seq_num, head_seq_num + buf_size)) {
 		head_seq_num = seq_inc(seq_sub(mpdu_seq_num, buf_size));
 		/* release stored frames up to new head to stack */
-		ieee80211_release_reorder_frames(hw, tid_agg_rx, head_seq_num);
+		ieee80211_release_reorder_frames(sdata, tid_agg_rx,
+						 head_seq_num);
 	}
 
 	/* Now the new frame is always in the range of the reordering buffer */
@@ -736,7 +737,7 @@ static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
 	tid_agg_rx->reorder_buf[index] = skb;
 	tid_agg_rx->reorder_time[index] = jiffies;
 	tid_agg_rx->stored_mpdu_num++;
-	ieee80211_sta_reorder_release(hw, tid_agg_rx);
+	ieee80211_sta_reorder_release(sdata, tid_agg_rx);
 
  out:
 	spin_unlock(&tid_agg_rx->reorder_lock);
@@ -751,7 +752,6 @@ static void ieee80211_rx_reorder_ampdu(struct ieee80211_rx_data *rx)
 {
 	struct sk_buff *skb = rx->skb;
 	struct ieee80211_local *local = rx->local;
-	struct ieee80211_hw *hw = &local->hw;
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
 	struct sta_info *sta = rx->sta;
@@ -813,7 +813,7 @@ static void ieee80211_rx_reorder_ampdu(struct ieee80211_rx_data *rx)
 	 * sure that we cannot get to it any more before doing
 	 * anything with it.
 	 */
-	if (ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, skb))
+	if (ieee80211_sta_manage_reorder_buf(rx->sdata, tid_agg_rx, skb))
 		return;
 
  dont_reorder:
@@ -2058,8 +2058,6 @@ ieee80211_rx_h_data(struct ieee80211_rx_data *rx)
 static ieee80211_rx_result debug_noinline
 ieee80211_rx_h_ctrl(struct ieee80211_rx_data *rx)
 {
-	struct ieee80211_local *local = rx->local;
-	struct ieee80211_hw *hw = &local->hw;
 	struct sk_buff *skb = rx->skb;
 	struct ieee80211_bar *bar = (struct ieee80211_bar *)skb->data;
 	struct tid_ampdu_rx *tid_agg_rx;
@@ -2096,7 +2094,8 @@ ieee80211_rx_h_ctrl(struct ieee80211_rx_data *rx)
 
 		spin_lock(&tid_agg_rx->reorder_lock);
 		/* release stored frames up to start of BAR */
-		ieee80211_release_reorder_frames(hw, tid_agg_rx, start_seq_num);
+		ieee80211_release_reorder_frames(rx->sdata, tid_agg_rx,
+						 start_seq_num);
 		spin_unlock(&tid_agg_rx->reorder_lock);
 
 		kfree_skb(skb);
@@ -2747,7 +2746,7 @@ void ieee80211_release_reorder_timeout(struct sta_info *sta, int tid)
 		return;
 
 	spin_lock(&tid_agg_rx->reorder_lock);
-	ieee80211_sta_reorder_release(&sta->local->hw, tid_agg_rx);
+	ieee80211_sta_reorder_release(sta->sdata, tid_agg_rx);
 	spin_unlock(&tid_agg_rx->reorder_lock);
 
 	ieee80211_rx_handlers(&rx);
-- 
cgit v1.1


From 0fd66be4a369e4a93bfd559c931e689539cc8e5f Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Fri, 15 Jun 2012 12:21:52 -0700
Subject: mwifiex: parse WPA IE and support WPA/WPA2 mixed mode for uAP

Add support for parsing WPA IE from beacon parameter of
cfg80211_ap_settings and set it to FW.

WPA/WPA2 mixed mode is supported with this patch.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/ie.c      | 55 ++++++++++++++++++++++------------
 drivers/net/wireless/mwifiex/uap_cmd.c | 17 ++++++++---
 2 files changed, 49 insertions(+), 23 deletions(-)

diff --git a/drivers/net/wireless/mwifiex/ie.c b/drivers/net/wireless/mwifiex/ie.c
index ceb82cd..328fb14 100644
--- a/drivers/net/wireless/mwifiex/ie.c
+++ b/drivers/net/wireless/mwifiex/ie.c
@@ -224,29 +224,46 @@ int mwifiex_set_mgmt_ies(struct mwifiex_private *priv,
 			 struct cfg80211_ap_settings *params)
 {
 	struct mwifiex_ie *beacon_ie = NULL, *pr_ie = NULL;
-	struct mwifiex_ie *ar_ie = NULL, *rsn_ie = NULL;
-	struct ieee_types_header *ie = NULL;
+	struct mwifiex_ie *ar_ie = NULL, *gen_ie = NULL;
+	struct ieee_types_header *rsn_ie = NULL, *wpa_ie = NULL;
 	u16 beacon_idx = MWIFIEX_AUTO_IDX_MASK, pr_idx = MWIFIEX_AUTO_IDX_MASK;
 	u16 ar_idx = MWIFIEX_AUTO_IDX_MASK, rsn_idx = MWIFIEX_AUTO_IDX_MASK;
-	u16 mask;
+	u16 mask, ie_len = 0;
+	const u8 *vendor_ie;
 	int ret = 0;
 
 	if (params->beacon.tail && params->beacon.tail_len) {
-		ie = (void *)cfg80211_find_ie(WLAN_EID_RSN, params->beacon.tail,
-					      params->beacon.tail_len);
-		if (ie) {
-			rsn_ie = kmalloc(sizeof(struct mwifiex_ie), GFP_KERNEL);
-			if (!rsn_ie)
-				return -ENOMEM;
-
-			rsn_ie->ie_index = cpu_to_le16(rsn_idx);
-			mask = MGMT_MASK_BEACON | MGMT_MASK_PROBE_RESP |
-			       MGMT_MASK_ASSOC_RESP;
-			rsn_ie->mgmt_subtype_mask = cpu_to_le16(mask);
-			rsn_ie->ie_length = cpu_to_le16(ie->len + 2);
-			memcpy(rsn_ie->ie_buffer, ie, ie->len + 2);
-
-			if (mwifiex_update_uap_custom_ie(priv, rsn_ie, &rsn_idx,
+		gen_ie = kzalloc(sizeof(struct mwifiex_ie), GFP_KERNEL);
+		if (!gen_ie)
+			return -ENOMEM;
+		gen_ie->ie_index = cpu_to_le16(rsn_idx);
+		mask = MGMT_MASK_BEACON | MGMT_MASK_PROBE_RESP |
+		       MGMT_MASK_ASSOC_RESP;
+		gen_ie->mgmt_subtype_mask = cpu_to_le16(mask);
+
+		rsn_ie = (void *)cfg80211_find_ie(WLAN_EID_RSN,
+						  params->beacon.tail,
+						  params->beacon.tail_len);
+		if (rsn_ie) {
+			memcpy(gen_ie->ie_buffer, rsn_ie, rsn_ie->len + 2);
+			ie_len = rsn_ie->len + 2;
+			gen_ie->ie_length = cpu_to_le16(ie_len);
+		}
+
+		vendor_ie = cfg80211_find_vendor_ie(WLAN_OUI_MICROSOFT,
+						    WLAN_OUI_TYPE_MICROSOFT_WPA,
+						    params->beacon.tail,
+						    params->beacon.tail_len);
+		if (vendor_ie) {
+			wpa_ie = (struct ieee_types_header *)vendor_ie;
+			memcpy(gen_ie->ie_buffer + ie_len,
+			       wpa_ie, wpa_ie->len + 2);
+			ie_len += wpa_ie->len + 2;
+			gen_ie->ie_length = cpu_to_le16(ie_len);
+		}
+
+		if (rsn_ie || wpa_ie) {
+			if (mwifiex_update_uap_custom_ie(priv, gen_ie, &rsn_idx,
 							 NULL, NULL,
 							 NULL, NULL)) {
 				ret = -1;
@@ -319,7 +336,7 @@ done:
 	kfree(beacon_ie);
 	kfree(pr_ie);
 	kfree(ar_ie);
-	kfree(rsn_ie);
+	kfree(gen_ie);
 
 	return ret;
 }
diff --git a/drivers/net/wireless/mwifiex/uap_cmd.c b/drivers/net/wireless/mwifiex/uap_cmd.c
index abb1322..f40e93fe 100644
--- a/drivers/net/wireless/mwifiex/uap_cmd.c
+++ b/drivers/net/wireless/mwifiex/uap_cmd.c
@@ -66,7 +66,7 @@ int mwifiex_set_secure_params(struct mwifiex_private *priv,
 			}
 			if (params->crypto.wpa_versions &
 			    NL80211_WPA_VERSION_2) {
-				bss_config->protocol = PROTOCOL_WPA2;
+				bss_config->protocol |= PROTOCOL_WPA2;
 				bss_config->key_mgmt = KEY_MGMT_EAP;
 			}
 			break;
@@ -78,7 +78,7 @@ int mwifiex_set_secure_params(struct mwifiex_private *priv,
 			}
 			if (params->crypto.wpa_versions &
 			    NL80211_WPA_VERSION_2) {
-				bss_config->protocol = PROTOCOL_WPA2;
+				bss_config->protocol |= PROTOCOL_WPA2;
 				bss_config->key_mgmt = KEY_MGMT_PSK;
 			}
 			break;
@@ -92,10 +92,19 @@ int mwifiex_set_secure_params(struct mwifiex_private *priv,
 		case WLAN_CIPHER_SUITE_WEP104:
 			break;
 		case WLAN_CIPHER_SUITE_TKIP:
-			bss_config->wpa_cfg.pairwise_cipher_wpa = CIPHER_TKIP;
+			if (params->crypto.wpa_versions & NL80211_WPA_VERSION_1)
+				bss_config->wpa_cfg.pairwise_cipher_wpa |=
+								CIPHER_TKIP;
+			if (params->crypto.wpa_versions & NL80211_WPA_VERSION_2)
+				bss_config->wpa_cfg.pairwise_cipher_wpa2 |=
+								CIPHER_TKIP;
 			break;
 		case WLAN_CIPHER_SUITE_CCMP:
-			bss_config->wpa_cfg.pairwise_cipher_wpa2 =
+			if (params->crypto.wpa_versions & NL80211_WPA_VERSION_1)
+				bss_config->wpa_cfg.pairwise_cipher_wpa |=
+								CIPHER_AES_CCMP;
+			if (params->crypto.wpa_versions & NL80211_WPA_VERSION_2)
+				bss_config->wpa_cfg.pairwise_cipher_wpa2 |=
 								CIPHER_AES_CCMP;
 		default:
 			break;
-- 
cgit v1.1


From f931c7705bb3e21edd345a0fa748462fd3df4122 Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Wed, 20 Jun 2012 19:58:36 -0700
Subject: mwifiex: wake up main thread to handle Tx traffic if scan is
 delayed/aborted

This is a flaw in recently implemented logic to handle Tx traffic
and scan operation simultaneously. We missed to wakeup main thread
to handle Tx traffic if scan is delayed/aborted.

For some cards (SD8797, for example), firmware will send SLEEP event
if there is no activity for 50msec. While handling the SLEEP event,
main thread will be woken up and Tx packet gets sent hence. In worst
case Tx traffic will be delayed for 50msec.

For other cards, such as USB8797, firmware won't send SLEEP event.
So, Tx traffic gets stuck if no other event triggers the wakeup of
main thread.

This patch fixes above issues.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/init.c | 1 +
 drivers/net/wireless/mwifiex/main.c | 3 ++-
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c
index 0f18ef6..b543a4d 100644
--- a/drivers/net/wireless/mwifiex/init.c
+++ b/drivers/net/wireless/mwifiex/init.c
@@ -103,6 +103,7 @@ static void scan_delay_timer_fn(unsigned long data)
 				  msecs_to_jiffies(MWIFIEX_SCAN_DELAY_MSEC));
 			adapter->scan_delay_cnt++;
 		}
+		queue_work(priv->adapter->workqueue, &priv->adapter->main_work);
 	} else {
 		/*
 		 * Tx data queue is empty. Get scan command from scan_pending_q
diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c
index 0f06f07..f0219efc 100644
--- a/drivers/net/wireless/mwifiex/main.c
+++ b/drivers/net/wireless/mwifiex/main.c
@@ -190,7 +190,8 @@ process_start:
 			    adapter->tx_lock_flag)
 				break;
 
-			if (adapter->scan_processing || adapter->data_sent ||
+			if ((adapter->scan_processing &&
+			     !adapter->scan_delay_cnt) || adapter->data_sent ||
 			    mwifiex_wmm_lists_empty(adapter)) {
 				if (adapter->cmd_sent || adapter->curr_cmd ||
 				    (!is_command_pending(adapter)))
-- 
cgit v1.1


From a4186ea6ec6c903e29294141d4861e8327fd113c Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Wed, 20 Jun 2012 19:58:37 -0700
Subject: mwifiex: enhance power save for USB and PCIe chipsets

FW will not explicitly notify about host sleep activation to the
host for USB and PCIe chipsets. Hence host should generate Host
Sleep Activated event as soon as Host Sleep parameters are
configured to FW successfully.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cmdevt.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index 51e023e..ea37b88 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -1102,7 +1102,8 @@ int mwifiex_ret_802_11_hs_cfg(struct mwifiex_private *priv,
 		&resp->params.opt_hs_cfg;
 	uint32_t conditions = le32_to_cpu(phs_cfg->params.hs_config.conditions);
 
-	if (phs_cfg->action == cpu_to_le16(HS_ACTIVATE)) {
+	if (phs_cfg->action == cpu_to_le16(HS_ACTIVATE) &&
+	    adapter->iface_type == MWIFIEX_SDIO) {
 		mwifiex_hs_activated_event(priv, true);
 		return 0;
 	} else {
@@ -1114,6 +1115,9 @@ int mwifiex_ret_802_11_hs_cfg(struct mwifiex_private *priv,
 	}
 	if (conditions != HOST_SLEEP_CFG_CANCEL) {
 		adapter->is_hs_configured = true;
+		if (adapter->iface_type == MWIFIEX_USB ||
+		    adapter->iface_type == MWIFIEX_PCIE)
+			mwifiex_hs_activated_event(priv, true);
 	} else {
 		adapter->is_hs_configured = false;
 		if (adapter->hs_activated)
-- 
cgit v1.1


From 8dc01811da1119d6a5e595b5200b788c6603d3b2 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Thu, 21 Jun 2012 11:33:32 +0200
Subject: brcmfmac: make inclusion of vmalloc.h explicit fixing linux-next
 build

This patch fixes problem detected in linux-next build for powerpc
allyesconfig. The error message below is no longer observed:

  CC      drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.o
drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c: In function 'brcmf_sdio_dump_console':
drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c:3085: error: implicit declaration of function 'vzalloc'
drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c:3085: warning: assignment makes pointer from integer without a cast
drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c:3113: error: implicit declaration of function 'vfree'
make[2]: *** [drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.o] Error 1

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 9971e13..076b772 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -32,6 +32,7 @@
 #include <linux/module.h>
 #include <linux/bcma/bcma.h>
 #include <linux/debugfs.h>
+#include <linux/vmalloc.h>
 #include <asm/unaligned.h>
 #include <defs.h>
 #include <brcmu_wifi.h>
-- 
cgit v1.1


From c49aa4aa2bc89e88672dc419a293d7b8c1f094d2 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Thu, 21 Jun 2012 15:49:13 +0200
Subject: brcmsmac: fix NULL pointer crash in brcms_c_regd_init()

In the function brcms_c_regd_init() the channels are validated
against the device capabilities. This is done for both 2.4G and
5G band, but there are devices that are 2.4G only, ie. BCM4313.
For that device this leads to a NULL dereference. This patch adds
a check in brcms_c_regd_init() to fix this.

Issue introduced in wireless-next tree by following commit:
cf03c5d brcm80211: smac: inform mac80211 of the X2 regulatory domain

Cc: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmsmac/channel.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
index d3c7260..2d365d3 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
@@ -768,6 +768,11 @@ void brcms_c_regd_init(struct brcms_c_info *wlc)
 			band = wlc->bandstate[BAND_2G_INDEX];
 		else
 			band = wlc->bandstate[BAND_5G_INDEX];
+
+		/* skip if band not initialized */
+		if (band->pi == NULL)
+			continue;
+
 		wlc_phy_chanspec_band_validch(band->pi, band->bandtype,
 					      &sup_chan);
 
-- 
cgit v1.1


From 81b67fd60a75cac36092aa37cd0728aab3a7a938 Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Date: Thu, 21 Jun 2012 20:33:59 +0530
Subject: ath9k_hw: rename mrcCCKOff to fix smatch warning

Rename mrcCCKOff for better code readability and also fixes
the smatch warning.

drivers/net/wireless/ath/ath9k/ar9003_phy.c:982
	ar9003_hw_ani_control() Error invalid range 1 to 0.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ani.c        |  8 ++------
 drivers/net/wireless/ath/ath9k/ani.h        |  4 +---
 drivers/net/wireless/ath/ath9k/ar5008_phy.c |  4 ++--
 drivers/net/wireless/ath/ath9k/ar9003_phy.c | 10 +++++-----
 4 files changed, 10 insertions(+), 16 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index a90aa0b..7ebc3465 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -238,7 +238,7 @@ static void ath9k_hw_set_cck_nil(struct ath_hw *ah, u_int8_t immunityLevel)
 	if (!AR_SREV_9300_20_OR_LATER(ah) || AR_SREV_9485(ah))
 		return;
 
-	if (aniState->mrcCCKOff == entry_cck->mrc_cck_on)
+	if (aniState->mrcCCK != entry_cck->mrc_cck_on)
 		ath9k_hw_ani_control(ah,
 				     ATH9K_ANI_MRC_CCK,
 				     entry_cck->mrc_cck_on);
@@ -525,11 +525,7 @@ void ath9k_hw_ani_init(struct ath_hw *ah)
 
 		ani->firstepLevel = ATH9K_ANI_FIRSTEP_LVL;
 
-		if (AR_SREV_9300_20_OR_LATER(ah))
-			ani->mrcCCKOff =
-				!ATH9K_ANI_ENABLE_MRC_CCK;
-		else
-			ani->mrcCCKOff = true;
+		ani->mrcCCK = AR_SREV_9300_20_OR_LATER(ah) ? true : false;
 
 		ani->ofdmsTurn = true;
 
diff --git a/drivers/net/wireless/ath/ath9k/ani.h b/drivers/net/wireless/ath/ath9k/ani.h
index 79c85fc..e9d841b 100644
--- a/drivers/net/wireless/ath/ath9k/ani.h
+++ b/drivers/net/wireless/ath/ath9k/ani.h
@@ -62,8 +62,6 @@
 #define ATH9K_SIG_SPUR_IMM_SETTING_MIN    0
 #define ATH9K_SIG_SPUR_IMM_SETTING_MAX    22
 
-#define ATH9K_ANI_ENABLE_MRC_CCK          true
-
 /* values here are relative to the INI */
 
 enum ath9k_ani_cmd {
@@ -111,7 +109,7 @@ struct ar5416AniState {
 	u8 ofdmNoiseImmunityLevel;
 	u8 cckNoiseImmunityLevel;
 	bool ofdmsTurn;
-	u8 mrcCCKOff;
+	u8 mrcCCK;
 	u8 spurImmunityLevel;
 	u8 firstepLevel;
 	u8 ofdmWeakSigDetect;
diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
index b6efcd9..874186b 100644
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
@@ -1234,7 +1234,7 @@ static bool ar5008_hw_ani_control_new(struct ath_hw *ah,
 		aniState->spurImmunityLevel,
 		aniState->ofdmWeakSigDetect ? "on" : "off",
 		aniState->firstepLevel,
-		!aniState->mrcCCKOff ? "on" : "off",
+		aniState->mrcCCK ? "on" : "off",
 		aniState->listenTime,
 		aniState->ofdmPhyErrCount,
 		aniState->cckPhyErrCount);
@@ -1322,7 +1322,7 @@ static void ar5008_hw_ani_cache_ini_regs(struct ath_hw *ah)
 	aniState->spurImmunityLevel = ATH9K_ANI_SPUR_IMMUNE_LVL;
 	aniState->firstepLevel = ATH9K_ANI_FIRSTEP_LVL;
 	aniState->ofdmWeakSigDetect = ATH9K_ANI_USE_OFDM_WEAK_SIG;
-	aniState->mrcCCKOff = true; /* not available on pre AR9003 */
+	aniState->mrcCCK = false; /* not available on pre AR9003 */
 }
 
 static void ar5008_hw_set_nf_limits(struct ath_hw *ah)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index ec8a8d5..f1975b9 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -979,16 +979,16 @@ static bool ar9003_hw_ani_control(struct ath_hw *ah,
 			      AR_PHY_MRC_CCK_ENABLE, is_on);
 		REG_RMW_FIELD(ah, AR_PHY_MRC_CCK_CTRL,
 			      AR_PHY_MRC_CCK_MUX_REG, is_on);
-		if (!is_on != aniState->mrcCCKOff) {
+		if (is_on != aniState->mrcCCK) {
 			ath_dbg(common, ANI, "** ch %d: MRC CCK: %s=>%s\n",
 				chan->channel,
-				!aniState->mrcCCKOff ? "on" : "off",
+				aniState->mrcCCK ? "on" : "off",
 				is_on ? "on" : "off");
 		if (is_on)
 			ah->stats.ast_ani_ccklow++;
 		else
 			ah->stats.ast_ani_cckhigh++;
-		aniState->mrcCCKOff = !is_on;
+		aniState->mrcCCK = is_on;
 		}
 	break;
 	}
@@ -1004,7 +1004,7 @@ static bool ar9003_hw_ani_control(struct ath_hw *ah,
 		aniState->spurImmunityLevel,
 		aniState->ofdmWeakSigDetect ? "on" : "off",
 		aniState->firstepLevel,
-		!aniState->mrcCCKOff ? "on" : "off",
+		aniState->mrcCCK ? "on" : "off",
 		aniState->listenTime,
 		aniState->ofdmPhyErrCount,
 		aniState->cckPhyErrCount);
@@ -1114,7 +1114,7 @@ static void ar9003_hw_ani_cache_ini_regs(struct ath_hw *ah)
 	aniState->spurImmunityLevel = ATH9K_ANI_SPUR_IMMUNE_LVL;
 	aniState->firstepLevel = ATH9K_ANI_FIRSTEP_LVL;
 	aniState->ofdmWeakSigDetect = ATH9K_ANI_USE_OFDM_WEAK_SIG;
-	aniState->mrcCCKOff = !ATH9K_ANI_ENABLE_MRC_CCK;
+	aniState->mrcCCK = true;
 }
 
 static void ar9003_hw_set_radar_params(struct ath_hw *ah,
-- 
cgit v1.1


From 4b5237cc86872319a321ca1a694dee8866f7d9a3 Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Date: Thu, 21 Jun 2012 20:34:00 +0530
Subject: ath9k_hw: fix smatch warning in ar9003_hw_spur_mitigate_mrc_cck

drivers/net/wireless/ath/ath9k/ar9003_phy.c:211
ar9003_hw_spur_mitigate_mrc_cck() error: potential NULL dereference
'spur_fbin_ptr'.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_phy.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index f1975b9..6b91ebb 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -173,7 +173,7 @@ static void ar9003_hw_spur_mitigate_mrc_cck(struct ath_hw *ah,
 	int cur_bb_spur, negative = 0, cck_spur_freq;
 	int i;
 	int range, max_spur_cnts, synth_freq;
-	u8 *spur_fbin_ptr = NULL;
+	u8 *spur_fbin_ptr = ar9003_get_spur_chan_ptr(ah, IS_CHAN_2GHZ(chan));
 
 	/*
 	 * Need to verify range +/- 10 MHz in control channel, otherwise spur
@@ -181,8 +181,6 @@ static void ar9003_hw_spur_mitigate_mrc_cck(struct ath_hw *ah,
 	 */
 
 	if (AR_SREV_9485(ah) || AR_SREV_9340(ah) || AR_SREV_9330(ah)) {
-		spur_fbin_ptr = ar9003_get_spur_chan_ptr(ah,
-							 IS_CHAN_2GHZ(chan));
 		if (spur_fbin_ptr[0] == 0) /* No spur */
 			return;
 		max_spur_cnts = 5;
-- 
cgit v1.1


From 5ea276963eacbef742fe4854883c0f69c903fcfd Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Thu, 21 Jun 2012 13:08:04 -0500
Subject: rtlwifi: Change debug level for deletion of an entry in CAM

When running in AP mode, the driver reports all deletions from CAM in
a cryptic manner that makes users think it is an error. change so that
the condition is only reported at higher-levels of debugging.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/cam.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/rtlwifi/cam.c b/drivers/net/wireless/rtlwifi/cam.c
index 3d8cc4a..6a2d72b 100644
--- a/drivers/net/wireless/rtlwifi/cam.c
+++ b/drivers/net/wireless/rtlwifi/cam.c
@@ -128,7 +128,7 @@ u8 rtl_cam_add_one_entry(struct ieee80211_hw *hw, u8 *mac_addr,
 	u32 us_config;
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 
-	RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
 		 "EntryNo:%x, ulKeyId=%x, ulEncAlg=%x, ulUseDK=%x MacAddr %pM\n",
 		 ul_entry_idx, ul_key_id, ul_enc_alg,
 		 ul_default_key, mac_addr);
@@ -342,7 +342,8 @@ void rtl_cam_del_entry(struct ieee80211_hw *hw, u8 *sta_addr)
 			/* Remove from HW Security CAM */
 			memset(rtlpriv->sec.hwsec_cam_sta_addr[i], 0, ETH_ALEN);
 			rtlpriv->sec.hwsec_cam_bitmap &= ~(BIT(0) << i);
-			pr_info("&&&&&&&&&del entry %d\n", i);
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+				 "del CAM entry %d\n", i);
 		}
 	}
 	return;
-- 
cgit v1.1


From e1262efb9bf9864532c0dfca2b2e222aee7bd0a5 Mon Sep 17 00:00:00 2001
From: Arkady Miasnikov <a-miasnikov@ti.com>
Date: Mon, 18 Jun 2012 16:21:12 +0300
Subject: wlcore: access the firmware memory via debugfs

Applications running in the user space needs access to the
memory of the chip. Examples of such access
- read/write global variables
- access to firmware log
- dump memory after firmware panic event

Arbitrary 4-bytes aligned location can be accessed by
read/write file wlcore/mem

[Check return value of wlcore_raw_read/write and wlcore_set_partition
calls as required by the recent IO changes. -- Luca]

Signed-off-by: Arkady Miasnikov <a-miasnikov@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/debugfs.c | 192 +++++++++++++++++++++++++++++++
 1 file changed, 192 insertions(+)

diff --git a/drivers/net/wireless/ti/wlcore/debugfs.c b/drivers/net/wireless/ti/wlcore/debugfs.c
index 1768f37..80dbc53 100644
--- a/drivers/net/wireless/ti/wlcore/debugfs.c
+++ b/drivers/net/wireless/ti/wlcore/debugfs.c
@@ -38,6 +38,8 @@
 /* ms */
 #define WL1271_DEBUGFS_STATS_LIFETIME 1000
 
+#define WLCORE_MAX_BLOCK_SIZE ((size_t)(4*PAGE_SIZE))
+
 /* debugfs macros idea from mac80211 */
 int wl1271_format_buffer(char __user *userbuf, size_t count,
 			 loff_t *ppos, char *fmt, ...)
@@ -1025,6 +1027,195 @@ static const struct file_operations sleep_auth_ops = {
 	.llseek = default_llseek,
 };
 
+static ssize_t dev_mem_read(struct file *file,
+	     char __user *user_buf, size_t count,
+	     loff_t *ppos)
+{
+	struct wl1271 *wl = file->private_data;
+	struct wlcore_partition_set part, old_part;
+	size_t bytes = count;
+	int ret;
+	char *buf;
+
+	/* only requests of dword-aligned size and offset are supported */
+	if (bytes % 4)
+		return -EINVAL;
+
+	if (*ppos % 4)
+		return -EINVAL;
+
+	/* function should return in reasonable time */
+	bytes = min(bytes, WLCORE_MAX_BLOCK_SIZE);
+
+	if (bytes == 0)
+		return -EINVAL;
+
+	memset(&part, 0, sizeof(part));
+	part.mem.start = file->f_pos;
+	part.mem.size = bytes;
+
+	buf = kmalloc(bytes, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	mutex_lock(&wl->mutex);
+
+	if (wl->state == WL1271_STATE_OFF) {
+		ret = -EFAULT;
+		goto skip_read;
+	}
+
+	ret = wl1271_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto skip_read;
+
+	/* store current partition and switch partition */
+	memcpy(&old_part, &wl->curr_part, sizeof(old_part));
+	ret = wlcore_set_partition(wl, &part);
+	if (ret < 0)
+		goto part_err;
+
+	ret = wlcore_raw_read(wl, 0, buf, bytes, false);
+	if (ret < 0)
+		goto read_err;
+
+read_err:
+	/* recover partition */
+	ret = wlcore_set_partition(wl, &old_part);
+	if (ret < 0)
+		goto part_err;
+
+part_err:
+	wl1271_ps_elp_sleep(wl);
+
+skip_read:
+	mutex_unlock(&wl->mutex);
+
+	if (ret == 0) {
+		ret = copy_to_user(user_buf, buf, bytes);
+		if (ret < bytes) {
+			bytes -= ret;
+			*ppos += bytes;
+			ret = 0;
+		} else {
+			ret = -EFAULT;
+		}
+	}
+
+	kfree(buf);
+
+	return ((ret == 0) ? bytes : ret);
+}
+
+static ssize_t dev_mem_write(struct file *file, const char __user *user_buf,
+		size_t count, loff_t *ppos)
+{
+	struct wl1271 *wl = file->private_data;
+	struct wlcore_partition_set part, old_part;
+	size_t bytes = count;
+	int ret;
+	char *buf;
+
+	/* only requests of dword-aligned size and offset are supported */
+	if (bytes % 4)
+		return -EINVAL;
+
+	if (*ppos % 4)
+		return -EINVAL;
+
+	/* function should return in reasonable time */
+	bytes = min(bytes, WLCORE_MAX_BLOCK_SIZE);
+
+	if (bytes == 0)
+		return -EINVAL;
+
+	memset(&part, 0, sizeof(part));
+	part.mem.start = file->f_pos;
+	part.mem.size = bytes;
+
+	buf = kmalloc(bytes, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = copy_from_user(buf, user_buf, bytes);
+	if (ret) {
+		ret = -EFAULT;
+		goto err_out;
+	}
+
+	mutex_lock(&wl->mutex);
+
+	if (wl->state == WL1271_STATE_OFF) {
+		ret = -EFAULT;
+		goto skip_write;
+	}
+
+	ret = wl1271_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto skip_write;
+
+	/* store current partition and switch partition */
+	memcpy(&old_part, &wl->curr_part, sizeof(old_part));
+	ret = wlcore_set_partition(wl, &part);
+	if (ret < 0)
+		goto part_err;
+
+	ret = wlcore_raw_write(wl, 0, buf, bytes, false);
+	if (ret < 0)
+		goto write_err;
+
+write_err:
+	/* recover partition */
+	ret = wlcore_set_partition(wl, &old_part);
+	if (ret < 0)
+		goto part_err;
+
+part_err:
+	wl1271_ps_elp_sleep(wl);
+
+skip_write:
+	mutex_unlock(&wl->mutex);
+
+	if (ret == 0)
+		*ppos += bytes;
+
+err_out:
+	kfree(buf);
+
+	return ((ret == 0) ? bytes : ret);
+}
+
+static loff_t dev_mem_seek(struct file *file, loff_t offset, int orig)
+{
+	loff_t ret;
+
+	/* only requests of dword-aligned size and offset are supported */
+	if (offset % 4)
+		return -EINVAL;
+
+	switch (orig) {
+	case SEEK_SET:
+		file->f_pos = offset;
+		ret = file->f_pos;
+		break;
+	case SEEK_CUR:
+		file->f_pos += offset;
+		ret = file->f_pos;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static const struct file_operations dev_mem_ops = {
+	.open = simple_open,
+	.read = dev_mem_read,
+	.write = dev_mem_write,
+	.llseek = dev_mem_seek,
+};
+
 static int wl1271_debugfs_add_files(struct wl1271 *wl,
 				    struct dentry *rootdir)
 {
@@ -1059,6 +1250,7 @@ static int wl1271_debugfs_add_files(struct wl1271 *wl,
 	DEBUGFS_ADD_PREFIX(rx_streaming, interval, streaming);
 	DEBUGFS_ADD_PREFIX(rx_streaming, always, streaming);
 
+	DEBUGFS_ADD_PREFIX(dev, mem, rootdir);
 
 	return 0;
 
-- 
cgit v1.1


From 96caded8d275f67c6000fa219b0c11e7d6bf8e0b Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Thu, 21 Jun 2012 18:10:47 +0300
Subject: wlcore: cancel suspend when recovery is pending

We wish to postpone suspend if recovery is pending. This will make sure
the FW is in a good state and perform wowlan wakeup.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/main.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index b0795aa..0df28d5 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -1661,6 +1661,12 @@ static int wl1271_op_suspend(struct ieee80211_hw *hw,
 	wl1271_debug(DEBUG_MAC80211, "mac80211 suspend wow=%d", !!wow);
 	WARN_ON(!wow);
 
+	/* we want to perform the recovery before suspending */
+	if (test_bit(WL1271_FLAG_RECOVERY_IN_PROGRESS, &wl->flags)) {
+		wl1271_warning("postponing suspend to perform recovery");
+		return -EBUSY;
+	}
+
 	wl1271_tx_flush(wl);
 
 	mutex_lock(&wl->mutex);
-- 
cgit v1.1


From 1d23396d9df0a9543b2ba5c288f4914ad1f19e46 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Thu, 21 Jun 2012 18:10:48 +0300
Subject: wlcore: don't allow SDIO read/writes after failure

Set a flag and after the first read/write failure is encountered.
This flag will disallow further SDIO read/writes until op_stop() is
executed, which will clear all flags.

This prevents further errors from occurring, since one error usually
indicates that IO operations won't work anymore until the chip is
rebooted.  By blocking more calls, we avoid extra timeouts and having
to wait for them to occur.

[Added second paragraph explaining why the change is needed. -- Luca]

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/io.h       | 22 ++++++++++++++++++++--
 drivers/net/wireless/ti/wlcore/wlcore_i.h |  1 +
 2 files changed, 21 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/io.h b/drivers/net/wireless/ti/wlcore/io.h
index 1cd545b..fef80ad 100644
--- a/drivers/net/wireless/ti/wlcore/io.h
+++ b/drivers/net/wireless/ti/wlcore/io.h
@@ -57,14 +57,32 @@ static inline int __must_check wlcore_raw_write(struct wl1271 *wl, int addr,
 						void *buf, size_t len,
 						bool fixed)
 {
-	return wl->if_ops->write(wl->dev, addr, buf, len, fixed);
+	int ret;
+
+	if (test_bit(WL1271_FLAG_SDIO_FAILED, &wl->flags))
+		return -EIO;
+
+	ret = wl->if_ops->write(wl->dev, addr, buf, len, fixed);
+	if (ret)
+		set_bit(WL1271_FLAG_SDIO_FAILED, &wl->flags);
+
+	return ret;
 }
 
 static inline int __must_check wlcore_raw_read(struct wl1271 *wl, int addr,
 					       void *buf, size_t len,
 					       bool fixed)
 {
-	return wl->if_ops->read(wl->dev, addr, buf, len, fixed);
+	int ret;
+
+	if (test_bit(WL1271_FLAG_SDIO_FAILED, &wl->flags))
+		return -EIO;
+
+	ret = wl->if_ops->read(wl->dev, addr, buf, len, fixed);
+	if (ret)
+		set_bit(WL1271_FLAG_SDIO_FAILED, &wl->flags);
+
+	return ret;
 }
 
 static inline int __must_check wlcore_raw_read_data(struct wl1271 *wl, int reg,
diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h
index e5a34dd..4273a21 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore_i.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h
@@ -247,6 +247,7 @@ enum wl12xx_flags {
 	WL1271_FLAG_RECOVERY_IN_PROGRESS,
 	WL1271_FLAG_VIF_CHANGE_IN_PROGRESS,
 	WL1271_FLAG_INTENDED_FW_RECOVERY,
+	WL1271_FLAG_SDIO_FAILED,
 };
 
 enum wl12xx_vif_flags {
-- 
cgit v1.1


From ea0a3cf95ed8839ce6f11bf9a050e6333bfc27d6 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Thu, 21 Jun 2012 18:10:49 +0300
Subject: wlcore: force recovery on resume if suspended without recovering

If an error is detected after mac80211 is already suspended, the recovery
work will not be queued. This will leave the driver in a bad state on
resume.

Detect this in the resume op and re-queue a recovery.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/main.c | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 0df28d5..0b51522 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -1707,7 +1707,7 @@ static int wl1271_op_resume(struct ieee80211_hw *hw)
 	struct wl1271 *wl = hw->priv;
 	struct wl12xx_vif *wlvif;
 	unsigned long flags;
-	bool run_irq_work = false;
+	bool run_irq_work = false, pending_recovery;
 
 	wl1271_debug(DEBUG_MAC80211, "mac80211 resume wow=%d",
 		     wl->wow_enabled);
@@ -1723,17 +1723,33 @@ static int wl1271_op_resume(struct ieee80211_hw *hw)
 		run_irq_work = true;
 	spin_unlock_irqrestore(&wl->wl_lock, flags);
 
+	/* test the recovery flag before calling any SDIO functions */
+	pending_recovery = test_bit(WL1271_FLAG_RECOVERY_IN_PROGRESS,
+				    &wl->flags);
+
 	if (run_irq_work) {
 		wl1271_debug(DEBUG_MAC80211,
 			     "run postponed irq_work directly");
-		wl1271_irq(0, wl);
+
+		/* don't talk to the HW if recovery is pending */
+		if (!pending_recovery)
+			wl1271_irq(0, wl);
+
 		wlcore_enable_interrupts(wl);
 	}
 
 	mutex_lock(&wl->mutex);
+	if (pending_recovery) {
+		wl1271_warning("queuing forgotten recovery on resume");
+		ieee80211_queue_work(wl->hw, &wl->recovery_work);
+		goto out;
+	}
+
 	wl12xx_for_each_wlvif(wl, wlvif) {
 		wl1271_configure_resume(wl, wlvif);
 	}
+
+out:
 	wl->wow_enabled = false;
 	mutex_unlock(&wl->mutex);
 
-- 
cgit v1.1


From c439a1ca3bdc58febf51a388a9930eeba361b410 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Thu, 21 Jun 2012 18:10:50 +0300
Subject: wlcore: check Rx-filter functions in the suspend path

Propagate some missing return values for Rx-filter related functions.
This and makes sure we always fail the suspend in case of SDIO errors.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/main.c | 27 +++++++++++++++++++++------
 drivers/net/wireless/ti/wlcore/rx.c   | 11 ++++++++---
 drivers/net/wireless/ti/wlcore/rx.h   |  2 +-
 3 files changed, 30 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 0b51522..e6e6654 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -1513,8 +1513,15 @@ static int wl1271_configure_wowlan(struct wl1271 *wl,
 	int i, ret;
 
 	if (!wow || wow->any || !wow->n_patterns) {
-		wl1271_acx_default_rx_filter_enable(wl, 0, FILTER_SIGNAL);
-		wl1271_rx_filter_clear_all(wl);
+		ret = wl1271_acx_default_rx_filter_enable(wl, 0,
+							  FILTER_SIGNAL);
+		if (ret)
+			goto out;
+
+		ret = wl1271_rx_filter_clear_all(wl);
+		if (ret)
+			goto out;
+
 		return 0;
 	}
 
@@ -1530,8 +1537,13 @@ static int wl1271_configure_wowlan(struct wl1271 *wl,
 		}
 	}
 
-	wl1271_acx_default_rx_filter_enable(wl, 0, FILTER_SIGNAL);
-	wl1271_rx_filter_clear_all(wl);
+	ret = wl1271_acx_default_rx_filter_enable(wl, 0, FILTER_SIGNAL);
+	if (ret)
+		goto out;
+
+	ret = wl1271_rx_filter_clear_all(wl);
+	if (ret)
+		goto out;
 
 	/* Translate WoWLAN patterns into filters */
 	for (i = 0; i < wow->n_patterns; i++) {
@@ -1573,7 +1585,10 @@ static int wl1271_configure_suspend_sta(struct wl1271 *wl,
 	if (ret < 0)
 		goto out;
 
-	wl1271_configure_wowlan(wl, wow);
+	ret = wl1271_configure_wowlan(wl, wow);
+	if (ret < 0)
+		goto out_sleep;
+
 	ret = wl1271_acx_wake_up_conditions(wl, wlvif,
 				    wl->conf.conn.suspend_wake_up_event,
 				    wl->conf.conn.suspend_listen_interval);
@@ -1581,8 +1596,8 @@ static int wl1271_configure_suspend_sta(struct wl1271 *wl,
 	if (ret < 0)
 		wl1271_error("suspend: set wake up conditions failed: %d", ret);
 
+out_sleep:
 	wl1271_ps_elp_sleep(wl);
-
 out:
 	return ret;
 
diff --git a/drivers/net/wireless/ti/wlcore/rx.c b/drivers/net/wireless/ti/wlcore/rx.c
index f42b969..f55e2f9 100644
--- a/drivers/net/wireless/ti/wlcore/rx.c
+++ b/drivers/net/wireless/ti/wlcore/rx.c
@@ -318,14 +318,19 @@ int wl1271_rx_filter_enable(struct wl1271 *wl,
 	return 0;
 }
 
-void wl1271_rx_filter_clear_all(struct wl1271 *wl)
+int wl1271_rx_filter_clear_all(struct wl1271 *wl)
 {
-	int i;
+	int i, ret = 0;
 
 	for (i = 0; i < WL1271_MAX_RX_FILTERS; i++) {
 		if (!wl->rx_filter_enabled[i])
 			continue;
-		wl1271_rx_filter_enable(wl, i, 0, NULL);
+		ret = wl1271_rx_filter_enable(wl, i, 0, NULL);
+		if (ret)
+			goto out;
 	}
+
+out:
+	return ret;
 }
 #endif /* CONFIG_PM */
diff --git a/drivers/net/wireless/ti/wlcore/rx.h b/drivers/net/wireless/ti/wlcore/rx.h
index 79f7839..71eba18 100644
--- a/drivers/net/wireless/ti/wlcore/rx.h
+++ b/drivers/net/wireless/ti/wlcore/rx.h
@@ -148,6 +148,6 @@ u8 wl1271_rate_to_idx(int rate, enum ieee80211_band band);
 int wl1271_rx_filter_enable(struct wl1271 *wl,
 			    int index, bool enable,
 			    struct wl12xx_rx_filter *filter);
-void wl1271_rx_filter_clear_all(struct wl1271 *wl);
+int wl1271_rx_filter_clear_all(struct wl1271 *wl);
 
 #endif
-- 
cgit v1.1


From b5b45b3cbd56162d9612dd76529d7ad9f6be9a56 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Thu, 21 Jun 2012 18:10:51 +0300
Subject: wlcore: refactor threaded IRQ routine

Separate the threaded IRQ handling routine into two functions.
The outer function takes the mutex and calls recovery on errors. It also
performs a Tx-path optimization to avoid redundant works.

The inner function is simplified - all calls to recovery are removed and
it assumes the lock is taken. The locked variant will be reused elsewhere.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/main.c | 62 +++++++++++++++++------------------
 1 file changed, 31 insertions(+), 31 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index e6e6654..0c1e075 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -494,20 +494,15 @@ static void wl1271_netstack_work(struct work_struct *work)
 
 #define WL1271_IRQ_MAX_LOOPS 256
 
-static irqreturn_t wl1271_irq(int irq, void *cookie)
+static int wlcore_irq_locked(struct wl1271 *wl)
 {
-	int ret;
+	int ret = 0;
 	u32 intr;
 	int loopcount = WL1271_IRQ_MAX_LOOPS;
-	struct wl1271 *wl = (struct wl1271 *)cookie;
 	bool done = false;
 	unsigned int defer_count;
 	unsigned long flags;
 
-	/* TX might be handled here, avoid redundant work */
-	set_bit(WL1271_FLAG_TX_PENDING, &wl->flags);
-	cancel_work_sync(&wl->tx_work);
-
 	/*
 	 * In case edge triggered interrupt must be used, we cannot iterate
 	 * more than once without introducing race conditions with the hardirq.
@@ -515,8 +510,6 @@ static irqreturn_t wl1271_irq(int irq, void *cookie)
 	if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ)
 		loopcount = 1;
 
-	mutex_lock(&wl->mutex);
-
 	wl1271_debug(DEBUG_IRQ, "IRQ work");
 
 	if (unlikely(wl->state == WL1271_STATE_OFF))
@@ -536,10 +529,8 @@ static irqreturn_t wl1271_irq(int irq, void *cookie)
 		smp_mb__after_clear_bit();
 
 		ret = wlcore_fw_status(wl, wl->fw_status_1, wl->fw_status_2);
-		if (ret < 0) {
-			wl12xx_queue_recovery_work(wl);
+		if (ret < 0)
 			goto out;
-		}
 
 		wlcore_hw_tx_immediate_compl(wl);
 
@@ -553,7 +544,7 @@ static irqreturn_t wl1271_irq(int irq, void *cookie)
 		if (unlikely(intr & WL1271_ACX_INTR_WATCHDOG)) {
 			wl1271_error("HW watchdog interrupt received! starting recovery.");
 			wl->watchdog_recovery = true;
-			wl12xx_queue_recovery_work(wl);
+			ret = -EIO;
 
 			/* restarting the chip. ignore any other interrupt. */
 			goto out;
@@ -563,7 +554,7 @@ static irqreturn_t wl1271_irq(int irq, void *cookie)
 			wl1271_error("SW watchdog interrupt received! "
 				     "starting recovery.");
 			wl->watchdog_recovery = true;
-			wl12xx_queue_recovery_work(wl);
+			ret = -EIO;
 
 			/* restarting the chip. ignore any other interrupt. */
 			goto out;
@@ -573,10 +564,8 @@ static irqreturn_t wl1271_irq(int irq, void *cookie)
 			wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_DATA");
 
 			ret = wlcore_rx(wl, wl->fw_status_1);
-			if (ret < 0) {
-				wl12xx_queue_recovery_work(wl);
+			if (ret < 0)
 				goto out;
-			}
 
 			/* Check if any tx blocks were freed */
 			spin_lock_irqsave(&wl->wl_lock, flags);
@@ -588,20 +577,16 @@ static irqreturn_t wl1271_irq(int irq, void *cookie)
 				 * call the work function directly.
 				 */
 				ret = wlcore_tx_work_locked(wl);
-				if (ret < 0) {
-					wl12xx_queue_recovery_work(wl);
+				if (ret < 0)
 					goto out;
-				}
 			} else {
 				spin_unlock_irqrestore(&wl->wl_lock, flags);
 			}
 
 			/* check for tx results */
 			ret = wlcore_hw_tx_delayed_compl(wl);
-			if (ret < 0) {
-				wl12xx_queue_recovery_work(wl);
+			if (ret < 0)
 				goto out;
-			}
 
 			/* Make sure the deferred queues don't get too long */
 			defer_count = skb_queue_len(&wl->deferred_tx_queue) +
@@ -613,19 +598,15 @@ static irqreturn_t wl1271_irq(int irq, void *cookie)
 		if (intr & WL1271_ACX_INTR_EVENT_A) {
 			wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_EVENT_A");
 			ret = wl1271_event_handle(wl, 0);
-			if (ret < 0) {
-				wl12xx_queue_recovery_work(wl);
+			if (ret < 0)
 				goto out;
-			}
 		}
 
 		if (intr & WL1271_ACX_INTR_EVENT_B) {
 			wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_EVENT_B");
 			ret = wl1271_event_handle(wl, 1);
-			if (ret < 0) {
-				wl12xx_queue_recovery_work(wl);
+			if (ret < 0)
 				goto out;
-			}
 		}
 
 		if (intr & WL1271_ACX_INTR_INIT_COMPLETE)
@@ -639,6 +620,25 @@ static irqreturn_t wl1271_irq(int irq, void *cookie)
 	wl1271_ps_elp_sleep(wl);
 
 out:
+	return ret;
+}
+
+static irqreturn_t wlcore_irq(int irq, void *cookie)
+{
+	int ret;
+	unsigned long flags;
+	struct wl1271 *wl = cookie;
+
+	/* TX might be handled here, avoid redundant work */
+	set_bit(WL1271_FLAG_TX_PENDING, &wl->flags);
+	cancel_work_sync(&wl->tx_work);
+
+	mutex_lock(&wl->mutex);
+
+	ret = wlcore_irq_locked(wl);
+	if (ret)
+		wl12xx_queue_recovery_work(wl);
+
 	spin_lock_irqsave(&wl->wl_lock, flags);
 	/* In case TX was not handled here, queue TX work */
 	clear_bit(WL1271_FLAG_TX_PENDING, &wl->flags);
@@ -1748,7 +1748,7 @@ static int wl1271_op_resume(struct ieee80211_hw *hw)
 
 		/* don't talk to the HW if recovery is pending */
 		if (!pending_recovery)
-			wl1271_irq(0, wl);
+			wlcore_irq(0, wl);
 
 		wlcore_enable_interrupts(wl);
 	}
@@ -5489,7 +5489,7 @@ int __devinit wlcore_probe(struct wl1271 *wl, struct platform_device *pdev)
 	else
 		irqflags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT;
 
-	ret = request_threaded_irq(wl->irq, wl12xx_hardirq, wl1271_irq,
+	ret = request_threaded_irq(wl->irq, wl12xx_hardirq, wlcore_irq,
 				   irqflags,
 				   pdev->name, wl);
 	if (ret < 0) {
-- 
cgit v1.1


From 725b82775e7901dc92afaddfa45683934e75c33e Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Thu, 21 Jun 2012 18:10:52 +0300
Subject: wlcore: prevent recovery in the middle of resume

Take the mutex early in the resume handler and use the locked version of
the IRQ routine. This ensures any recoveries queued will only take place
after resume has fully completed.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/main.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 0c1e075..372ccf2 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -1723,6 +1723,7 @@ static int wl1271_op_resume(struct ieee80211_hw *hw)
 	struct wl12xx_vif *wlvif;
 	unsigned long flags;
 	bool run_irq_work = false, pending_recovery;
+	int ret;
 
 	wl1271_debug(DEBUG_MAC80211, "mac80211 resume wow=%d",
 		     wl->wow_enabled);
@@ -1738,6 +1739,8 @@ static int wl1271_op_resume(struct ieee80211_hw *hw)
 		run_irq_work = true;
 	spin_unlock_irqrestore(&wl->wl_lock, flags);
 
+	mutex_lock(&wl->mutex);
+
 	/* test the recovery flag before calling any SDIO functions */
 	pending_recovery = test_bit(WL1271_FLAG_RECOVERY_IN_PROGRESS,
 				    &wl->flags);
@@ -1747,13 +1750,15 @@ static int wl1271_op_resume(struct ieee80211_hw *hw)
 			     "run postponed irq_work directly");
 
 		/* don't talk to the HW if recovery is pending */
-		if (!pending_recovery)
-			wlcore_irq(0, wl);
+		if (!pending_recovery) {
+			ret = wlcore_irq_locked(wl);
+			if (ret)
+				wl12xx_queue_recovery_work(wl);
+		}
 
 		wlcore_enable_interrupts(wl);
 	}
 
-	mutex_lock(&wl->mutex);
 	if (pending_recovery) {
 		wl1271_warning("queuing forgotten recovery on resume");
 		ieee80211_queue_work(wl->hw, &wl->recovery_work);
-- 
cgit v1.1


From bdcbd8e0e3ffdad32b14b6373e67bfcf5fd3f002 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 22 Jun 2012 11:29:50 +0200
Subject: mac80211: clean up debugging

There are a few things that make the logging and
debugging in mac80211 less useful than it should
be right now:
 * a lot of messages should be pr_info, not pr_debug
 * wholesale use of pr_debug makes it require *both*
   Kconfig and dynamic configuration
 * there are still a lot of ifdefs
 * the style is very inconsistent, sometimes the
   sdata->name is printed in front

Clean up everything, introducing new macros and
separating out the station MLME debugging into
a new Kconfig symbol.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/net/mac80211.h        |  24 -----
 net/mac80211/Kconfig          |  32 +++++--
 net/mac80211/Makefile         |   2 +-
 net/mac80211/agg-rx.c         |  34 +++----
 net/mac80211/agg-tx.c         |  72 ++++++++-------
 net/mac80211/cfg.c            |   9 +-
 net/mac80211/debug.h          | 152 +++++++++++++++++++++++++++++++
 net/mac80211/debugfs_netdev.c |   5 +-
 net/mac80211/ht.c             |  10 +--
 net/mac80211/ibss.c           |  89 +++++++++---------
 net/mac80211/ieee80211_i.h    |   1 +
 net/mac80211/iface.c          |  13 +--
 net/mac80211/key.c            |   4 +-
 net/mac80211/mesh.c           |   4 -
 net/mac80211/mesh_hwmp.c      |  42 ++++-----
 net/mac80211/mesh_pathtbl.c   |  30 +++----
 net/mac80211/mesh_plink.c     |  61 +++++++------
 net/mac80211/mesh_sync.c      |  47 +++++-----
 net/mac80211/mlme.c           | 203 +++++++++++++++++++-----------------------
 net/mac80211/rx.c             |  40 +++------
 net/mac80211/sta_info.c       |  44 ++++-----
 net/mac80211/status.c         |  11 +--
 net/mac80211/tx.c             |  43 ++++-----
 23 files changed, 519 insertions(+), 453 deletions(-)
 create mode 100644 net/mac80211/debug.h

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index f11c2f8..510d852 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -3842,28 +3842,4 @@ int ieee80211_add_ext_srates_ie(struct ieee80211_vif *vif,
  */
 int ieee80211_ave_rssi(struct ieee80211_vif *vif);
 
-/* Extra debugging macros */
-
-#ifdef CONFIG_MAC80211_HT_DEBUG
-#define ht_vdbg(fmt, ...)			\
-	pr_debug(fmt, ##__VA_ARGS__)
-#else
-#define ht_vdbg(fmt, ...)			\
-do {						\
-	if (0)					\
-		pr_debug(fmt, ##__VA_ARGS__);	\
-} while (0)
-#endif
-
-#ifdef CONFIG_MAC80211_IBSS_DEBUG
-#define ibss_vdbg(fmt, ...)			\
-	pr_debug(fmt, ##__VA_ARGS__)
-#else
-#define ibss_vdbg(fmt, ...)			\
-do {						\
-	if (0)					\
-		pr_debug(fmt, ##__VA_ARGS__);	\
-} while (0)
-#endif
-
 #endif /* MAC80211_H */
diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig
index 323aa19..7475e26 100644
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
@@ -140,6 +140,26 @@ config MAC80211_VERBOSE_DEBUG
 
 	  Do not select this option.
 
+config MAC80211_MLME_DEBUG
+	bool "Verbose managed MLME output"
+	depends on MAC80211_DEBUG_MENU
+	---help---
+	  Selecting this option causes mac80211 to print out
+	  debugging messages for the managed-mode MLME. It
+	  should not be selected on production systems as some
+	  of the messages are remotely triggerable.
+
+	  Do not select this option.
+
+config MAC80211_STA_DEBUG
+	bool "Verbose station debugging"
+	depends on MAC80211_DEBUG_MENU
+	---help---
+	  Selecting this option causes mac80211 to print out
+	  debugging messages for station addition/removal.
+
+	  Do not select this option.
+
 config MAC80211_HT_DEBUG
 	bool "Verbose HT debugging"
 	depends on MAC80211_DEBUG_MENU
@@ -163,7 +183,7 @@ config MAC80211_IBSS_DEBUG
 
 	  Do not select this option.
 
-config MAC80211_VERBOSE_PS_DEBUG
+config MAC80211_PS_DEBUG
 	bool "Verbose powersave mode debugging"
 	depends on MAC80211_DEBUG_MENU
 	---help---
@@ -175,7 +195,7 @@ config MAC80211_VERBOSE_PS_DEBUG
 
 	  Do not select this option.
 
-config MAC80211_VERBOSE_MPL_DEBUG
+config MAC80211_MPL_DEBUG
 	bool "Verbose mesh peer link debugging"
 	depends on MAC80211_DEBUG_MENU
 	depends on MAC80211_MESH
@@ -188,7 +208,7 @@ config MAC80211_VERBOSE_MPL_DEBUG
 
 	  Do not select this option.
 
-config MAC80211_VERBOSE_MPATH_DEBUG
+config MAC80211_MPATH_DEBUG
 	bool "Verbose mesh path debugging"
 	depends on MAC80211_DEBUG_MENU
 	depends on MAC80211_MESH
@@ -201,7 +221,7 @@ config MAC80211_VERBOSE_MPATH_DEBUG
 
 	  Do not select this option.
 
-config MAC80211_VERBOSE_MHWMP_DEBUG
+config MAC80211_MHWMP_DEBUG
 	bool "Verbose mesh HWMP routing debugging"
 	depends on MAC80211_DEBUG_MENU
 	depends on MAC80211_MESH
@@ -214,7 +234,7 @@ config MAC80211_VERBOSE_MHWMP_DEBUG
 
 	  Do not select this option.
 
-config MAC80211_VERBOSE_MESH_SYNC_DEBUG
+config MAC80211_MESH_SYNC_DEBUG
 	bool "Verbose mesh mesh synchronization debugging"
 	depends on MAC80211_DEBUG_MENU
 	depends on MAC80211_MESH
@@ -225,7 +245,7 @@ config MAC80211_VERBOSE_MESH_SYNC_DEBUG
 
 	  Do not select this option.
 
-config MAC80211_VERBOSE_TDLS_DEBUG
+config MAC80211_TDLS_DEBUG
 	bool "Verbose TDLS debugging"
 	depends on MAC80211_DEBUG_MENU
 	---help---
diff --git a/net/mac80211/Makefile b/net/mac80211/Makefile
index 2b1470b..231ffa0 100644
--- a/net/mac80211/Makefile
+++ b/net/mac80211/Makefile
@@ -58,4 +58,4 @@ mac80211-$(CONFIG_MAC80211_RC_PID) += $(rc80211_pid-y)
 mac80211-$(CONFIG_MAC80211_RC_MINSTREL) += $(rc80211_minstrel-y)
 mac80211-$(CONFIG_MAC80211_RC_MINSTREL_HT) += $(rc80211_minstrel_ht-y)
 
-ccflags-y += -D__CHECK_ENDIAN__
+ccflags-y += -D__CHECK_ENDIAN__ -DDEBUG
diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c
index 32ef11d..186d991 100644
--- a/net/mac80211/agg-rx.c
+++ b/net/mac80211/agg-rx.c
@@ -74,15 +74,17 @@ void ___ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid,
 
 	RCU_INIT_POINTER(sta->ampdu_mlme.tid_rx[tid], NULL);
 
-	ht_vdbg("Rx BA session stop requested for %pM tid %u %s reason: %d\n",
-		sta->sta.addr, tid,
-		initiator == WLAN_BACK_RECIPIENT ? "recipient" : "inititator",
-		(int)reason);
+	ht_dbg(sta->sdata,
+	       "Rx BA session stop requested for %pM tid %u %s reason: %d\n",
+	       sta->sta.addr, tid,
+	       initiator == WLAN_BACK_RECIPIENT ? "recipient" : "inititator",
+	       (int)reason);
 
 	if (drv_ampdu_action(local, sta->sdata, IEEE80211_AMPDU_RX_STOP,
 			     &sta->sta, tid, NULL, 0))
-		pr_debug("HW problem - can not stop rx aggregation for tid %d\n",
-			 tid);
+		sdata_info(sta->sdata,
+			   "HW problem - can not stop rx aggregation for tid %d\n",
+			   tid);
 
 	/* check if this is a self generated aggregation halt */
 	if (initiator == WLAN_BACK_RECIPIENT && tx)
@@ -157,7 +159,7 @@ static void sta_rx_agg_session_timer_expired(unsigned long data)
 	}
 	rcu_read_unlock();
 
-	ht_vdbg("rx session timer expired on tid %d\n", (u16)*ptid);
+	ht_dbg(sta->sdata, "rx session timer expired on tid %d\n", (u16)*ptid);
 
 	set_bit(*ptid, sta->ampdu_mlme.tid_rx_timer_expired);
 	ieee80211_queue_work(&sta->local->hw, &sta->ampdu_mlme.work);
@@ -245,7 +247,7 @@ void ieee80211_process_addba_request(struct ieee80211_local *local,
 	status = WLAN_STATUS_REQUEST_DECLINED;
 
 	if (test_sta_flag(sta, WLAN_STA_BLOCK_BA)) {
-		ht_vdbg("Suspend in progress - Denying ADDBA request\n");
+		ht_dbg(sta->sdata, "Suspend in progress - Denying ADDBA request\n");
 		goto end_no_lock;
 	}
 
@@ -257,10 +259,9 @@ void ieee80211_process_addba_request(struct ieee80211_local *local,
 	     (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_DELAY_BA))) ||
 	    (buf_size > IEEE80211_MAX_AMPDU_BUF)) {
 		status = WLAN_STATUS_INVALID_QOS_PARAM;
-#ifdef CONFIG_MAC80211_HT_DEBUG
-		net_dbg_ratelimited("AddBA Req with bad params from %pM on tid %u. policy %d, buffer size %d\n",
-				    mgmt->sa, tid, ba_policy, buf_size);
-#endif /* CONFIG_MAC80211_HT_DEBUG */
+		ht_dbg_ratelimited(sta->sdata,
+				   "AddBA Req with bad params from %pM on tid %u. policy %d, buffer size %d\n",
+				   mgmt->sa, tid, ba_policy, buf_size);
 		goto end_no_lock;
 	}
 	/* determine default buffer size */
@@ -275,10 +276,9 @@ void ieee80211_process_addba_request(struct ieee80211_local *local,
 	mutex_lock(&sta->ampdu_mlme.mtx);
 
 	if (sta->ampdu_mlme.tid_rx[tid]) {
-#ifdef CONFIG_MAC80211_HT_DEBUG
-		net_dbg_ratelimited("unexpected AddBA Req from %pM on tid %u\n",
-				    mgmt->sa, tid);
-#endif /* CONFIG_MAC80211_HT_DEBUG */
+		ht_dbg_ratelimited(sta->sdata,
+				   "unexpected AddBA Req from %pM on tid %u\n",
+				   mgmt->sa, tid);
 
 		/* delete existing Rx BA session on the same tid */
 		___ieee80211_stop_rx_ba_session(sta, tid, WLAN_BACK_RECIPIENT,
@@ -317,7 +317,7 @@ void ieee80211_process_addba_request(struct ieee80211_local *local,
 
 	ret = drv_ampdu_action(local, sta->sdata, IEEE80211_AMPDU_RX_START,
 			       &sta->sta, tid, &start_seq_num, 0);
-	ht_vdbg("Rx A-MPDU request on tid %d result %d\n", tid, ret);
+	ht_dbg(sta->sdata, "Rx A-MPDU request on tid %d result %d\n", tid, ret);
 	if (ret) {
 		kfree(tid_agg_rx->reorder_buf);
 		kfree(tid_agg_rx->reorder_time);
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index da07f01..5cc1bf7 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -184,8 +184,8 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
 
 	spin_unlock_bh(&sta->lock);
 
-	ht_vdbg("Tx BA session stop requested for %pM tid %u\n",
-		sta->sta.addr, tid);
+	ht_dbg(sta->sdata, "Tx BA session stop requested for %pM tid %u\n",
+	       sta->sta.addr, tid);
 
 	del_timer_sync(&tid_tx->addba_resp_timer);
 	del_timer_sync(&tid_tx->session_timer);
@@ -251,12 +251,13 @@ static void sta_addba_resp_timer_expired(unsigned long data)
 	if (!tid_tx ||
 	    test_bit(HT_AGG_STATE_RESPONSE_RECEIVED, &tid_tx->state)) {
 		rcu_read_unlock();
-		ht_vdbg("timer expired on tid %d but we are not (or no longer) expecting addBA response there\n",
-			tid);
+		ht_dbg(sta->sdata,
+		       "timer expired on tid %d but we are not (or no longer) expecting addBA response there\n",
+		       tid);
 		return;
 	}
 
-	ht_vdbg("addBA response timer expired on tid %d\n", tid);
+	ht_dbg(sta->sdata, "addBA response timer expired on tid %d\n", tid);
 
 	ieee80211_stop_tx_ba_session(&sta->sta, tid);
 	rcu_read_unlock();
@@ -316,8 +317,9 @@ ieee80211_agg_splice_packets(struct ieee80211_sub_if_data *sdata,
 
 	ieee80211_stop_queue_agg(sdata, tid);
 
-	if (WARN(!tid_tx, "TID %d gone but expected when splicing aggregates"
-			  " from the pending queue\n", tid))
+	if (WARN(!tid_tx,
+		 "TID %d gone but expected when splicing aggregates from the pending queue\n",
+		 tid))
 		return;
 
 	if (!skb_queue_empty(&tid_tx->pending)) {
@@ -365,7 +367,8 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
 	ret = drv_ampdu_action(local, sdata, IEEE80211_AMPDU_TX_START,
 			       &sta->sta, tid, &start_seq_num, 0);
 	if (ret) {
-		ht_vdbg("BA request denied - HW unavailable for tid %d\n", tid);
+		ht_dbg(sdata,
+		       "BA request denied - HW unavailable for tid %d\n", tid);
 		spin_lock_bh(&sta->lock);
 		ieee80211_agg_splice_packets(sdata, tid_tx, tid);
 		ieee80211_assign_tid_tx(sta, tid, NULL);
@@ -378,7 +381,7 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
 
 	/* activate the timer for the recipient's addBA response */
 	mod_timer(&tid_tx->addba_resp_timer, jiffies + ADDBA_RESP_INTERVAL);
-	ht_vdbg("activated addBA response timer on tid %d\n", tid);
+	ht_dbg(sdata, "activated addBA response timer on tid %d\n", tid);
 
 	spin_lock_bh(&sta->lock);
 	sta->ampdu_mlme.last_addba_req_time[tid] = jiffies;
@@ -425,7 +428,7 @@ static void sta_tx_agg_session_timer_expired(unsigned long data)
 
 	rcu_read_unlock();
 
-	ht_vdbg("tx session timer expired on tid %d\n", (u16)*ptid);
+	ht_dbg(sta->sdata, "tx session timer expired on tid %d\n", (u16)*ptid);
 
 	ieee80211_stop_tx_ba_session(&sta->sta, *ptid);
 }
@@ -449,8 +452,8 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid,
 	    (local->hw.flags & IEEE80211_HW_TX_AMPDU_SETUP_IN_HW))
 		return -EINVAL;
 
-	ht_vdbg("Open BA session requested for %pM tid %u\n",
-		pubsta->addr, tid);
+	ht_dbg(sdata, "Open BA session requested for %pM tid %u\n",
+	       pubsta->addr, tid);
 
 	if (sdata->vif.type != NL80211_IFTYPE_STATION &&
 	    sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
@@ -460,7 +463,8 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid,
 		return -EINVAL;
 
 	if (test_sta_flag(sta, WLAN_STA_BLOCK_BA)) {
-		ht_vdbg("BA sessions blocked - Denying BA session request\n");
+		ht_dbg(sdata,
+		       "BA sessions blocked - Denying BA session request\n");
 		return -EINVAL;
 	}
 
@@ -478,8 +482,9 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid,
 	 */
 	if (sta->sdata->vif.type == NL80211_IFTYPE_ADHOC &&
 	    !sta->sta.ht_cap.ht_supported) {
-		ht_vdbg("BA request denied - IBSS STA %pM does not advertise HT support\n",
-			pubsta->addr);
+		ht_dbg(sdata,
+		       "BA request denied - IBSS STA %pM does not advertise HT support\n",
+		       pubsta->addr);
 		return -EINVAL;
 	}
 
@@ -499,8 +504,9 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid,
 	if (sta->ampdu_mlme.addba_req_num[tid] > HT_AGG_BURST_RETRIES &&
 	    time_before(jiffies, sta->ampdu_mlme.last_addba_req_time[tid] +
 			HT_AGG_RETRIES_PERIOD)) {
-		ht_vdbg("BA request denied - waiting a grace period after %d failed requests on tid %u\n",
-			sta->ampdu_mlme.addba_req_num[tid], tid);
+		ht_dbg(sdata,
+		       "BA request denied - waiting a grace period after %d failed requests on tid %u\n",
+		       sta->ampdu_mlme.addba_req_num[tid], tid);
 		ret = -EBUSY;
 		goto err_unlock_sta;
 	}
@@ -508,8 +514,9 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid,
 	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
 	/* check if the TID is not in aggregation flow already */
 	if (tid_tx || sta->ampdu_mlme.tid_start_tx[tid]) {
-		ht_vdbg("BA request denied - session is not idle on tid %u\n",
-			tid);
+		ht_dbg(sdata,
+		       "BA request denied - session is not idle on tid %u\n",
+		       tid);
 		ret = -EAGAIN;
 		goto err_unlock_sta;
 	}
@@ -564,7 +571,7 @@ static void ieee80211_agg_tx_operational(struct ieee80211_local *local,
 
 	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
 
-	ht_vdbg("Aggregation is on for tid %d\n", tid);
+	ht_dbg(sta->sdata, "Aggregation is on for tid %d\n", tid);
 
 	drv_ampdu_action(local, sta->sdata,
 			 IEEE80211_AMPDU_TX_OPERATIONAL,
@@ -598,7 +605,8 @@ void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid)
 	trace_api_start_tx_ba_cb(sdata, ra, tid);
 
 	if (tid >= STA_TID_NUM) {
-		ht_vdbg("Bad TID value: tid = %d (>= %d)\n", tid, STA_TID_NUM);
+		ht_dbg(sdata, "Bad TID value: tid = %d (>= %d)\n",
+		       tid, STA_TID_NUM);
 		return;
 	}
 
@@ -606,7 +614,7 @@ void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid)
 	sta = sta_info_get_bss(sdata, ra);
 	if (!sta) {
 		mutex_unlock(&local->sta_mtx);
-		ht_vdbg("Could not find station: %pM\n", ra);
+		ht_dbg(sdata, "Could not find station: %pM\n", ra);
 		return;
 	}
 
@@ -614,7 +622,7 @@ void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid)
 	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
 
 	if (WARN_ON(!tid_tx)) {
-		ht_vdbg("addBA was not requested!\n");
+		ht_dbg(sdata, "addBA was not requested!\n");
 		goto unlock;
 	}
 
@@ -714,17 +722,18 @@ void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid)
 	trace_api_stop_tx_ba_cb(sdata, ra, tid);
 
 	if (tid >= STA_TID_NUM) {
-		ht_vdbg("Bad TID value: tid = %d (>= %d)\n", tid, STA_TID_NUM);
+		ht_dbg(sdata, "Bad TID value: tid = %d (>= %d)\n",
+		       tid, STA_TID_NUM);
 		return;
 	}
 
-	ht_vdbg("Stopping Tx BA session for %pM tid %d\n", ra, tid);
+	ht_dbg(sdata, "Stopping Tx BA session for %pM tid %d\n", ra, tid);
 
 	mutex_lock(&local->sta_mtx);
 
 	sta = sta_info_get_bss(sdata, ra);
 	if (!sta) {
-		ht_vdbg("Could not find station: %pM\n", ra);
+		ht_dbg(sdata, "Could not find station: %pM\n", ra);
 		goto unlock;
 	}
 
@@ -733,7 +742,7 @@ void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid)
 	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
 
 	if (!tid_tx || !test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
-		ht_vdbg("unexpected callback to A-MPDU stop\n");
+		ht_dbg(sdata, "unexpected callback to A-MPDU stop\n");
 		goto unlock_sta;
 	}
 
@@ -809,13 +818,13 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local,
 		goto out;
 
 	if (mgmt->u.action.u.addba_resp.dialog_token != tid_tx->dialog_token) {
-		ht_vdbg("wrong addBA response token, tid %d\n", tid);
+		ht_dbg(sta->sdata, "wrong addBA response token, tid %d\n", tid);
 		goto out;
 	}
 
 	del_timer_sync(&tid_tx->addba_resp_timer);
 
-	ht_vdbg("switched off addBA timer for tid %d\n", tid);
+	ht_dbg(sta->sdata, "switched off addBA timer for tid %d\n", tid);
 
 	/*
 	 * addba_resp_timer may have fired before we got here, and
@@ -824,8 +833,9 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local,
 	 */
 	if (test_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state) ||
 	    test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
-		ht_vdbg("got addBA resp for tid %d but we already gave up\n",
-			tid);
+		ht_dbg(sta->sdata,
+		       "got addBA resp for tid %d but we already gave up\n",
+		       tid);
 		goto out;
 	}
 
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index d0c8f78..7722a73 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -2771,9 +2771,8 @@ static int ieee80211_tdls_mgmt(struct wiphy *wiphy, struct net_device *dev,
 	    !sdata->u.mgd.associated)
 		return -EINVAL;
 
-#ifdef CONFIG_MAC80211_VERBOSE_TDLS_DEBUG
-	pr_debug("TDLS mgmt action %d peer %pM\n", action_code, peer);
-#endif
+	tdls_dbg(sdata, "TDLS mgmt action %d peer %pM\n",
+		 action_code, peer);
 
 	skb = dev_alloc_skb(local->hw.extra_tx_headroom +
 			    max(sizeof(struct ieee80211_mgmt),
@@ -2882,9 +2881,7 @@ static int ieee80211_tdls_oper(struct wiphy *wiphy, struct net_device *dev,
 	if (sdata->vif.type != NL80211_IFTYPE_STATION)
 		return -EINVAL;
 
-#ifdef CONFIG_MAC80211_VERBOSE_TDLS_DEBUG
-	pr_debug("TDLS oper %d peer %pM\n", oper, peer);
-#endif
+	tdls_dbg(sdata, "TDLS oper %d peer %pM\n", oper, peer);
 
 	switch (oper) {
 	case NL80211_TDLS_ENABLE_LINK:
diff --git a/net/mac80211/debug.h b/net/mac80211/debug.h
new file mode 100644
index 0000000..6e6bbb9
--- /dev/null
+++ b/net/mac80211/debug.h
@@ -0,0 +1,152 @@
+#ifndef __MAC80211_DEBUG_H
+#define __MAC80211_DEBUG_H
+
+#ifdef CONFIG_MAC80211_IBSS_DEBUG
+#define MAC80211_IBSS_DEBUG 1
+#else
+#define MAC80211_IBSS_DEBUG 0
+#endif
+
+#ifdef CONFIG_MAC80211_PS_DEBUG
+#define MAC80211_PS_DEBUG 1
+#else
+#define MAC80211_PS_DEBUG 0
+#endif
+
+#ifdef CONFIG_MAC80211_HT_DEBUG
+#define MAC80211_HT_DEBUG 1
+#else
+#define MAC80211_HT_DEBUG 0
+#endif
+
+#ifdef CONFIG_MAC80211_MPL_DEBUG
+#define MAC80211_MPL_DEBUG 1
+#else
+#define MAC80211_MPL_DEBUG 0
+#endif
+
+#ifdef CONFIG_MAC80211_MPATH_DEBUG
+#define MAC80211_MPATH_DEBUG 1
+#else
+#define MAC80211_MPATH_DEBUG 0
+#endif
+
+#ifdef CONFIG_MAC80211_MHWMP_DEBUG
+#define MAC80211_MHWMP_DEBUG 1
+#else
+#define MAC80211_MHWMP_DEBUG 0
+#endif
+
+#ifdef CONFIG_MAC80211_MESH_SYNC_DEBUG
+#define MAC80211_MESH_SYNC_DEBUG 1
+#else
+#define MAC80211_MESH_SYNC_DEBUG 0
+#endif
+
+#ifdef CONFIG_MAC80211_TDLS_DEBUG
+#define MAC80211_TDLS_DEBUG 1
+#else
+#define MAC80211_TDLS_DEBUG 0
+#endif
+
+#ifdef CONFIG_MAC80211_STA_DEBUG
+#define MAC80211_STA_DEBUG 1
+#else
+#define MAC80211_STA_DEBUG 0
+#endif
+
+#ifdef CONFIG_MAC80211_MLME_DEBUG
+#define MAC80211_MLME_DEBUG 1
+#else
+#define MAC80211_MLME_DEBUG 0
+#endif
+
+#define _sdata_info(sdata, fmt, ...)					\
+do {									\
+	pr_info("%s: " fmt,						\
+		(sdata)->name, ##__VA_ARGS__);				\
+} while (0)
+
+#define _sdata_dbg(print, sdata, fmt, ...)				\
+do {									\
+	if (print)							\
+		pr_debug("%s: " fmt,					\
+			 (sdata)->name, ##__VA_ARGS__);			\
+} while (0)
+
+#define _sdata_err(sdata, fmt, ...)					\
+do {									\
+	pr_err("%s: " fmt,						\
+	       (sdata)->name, ##__VA_ARGS__);				\
+} while (0)
+
+#define _wiphy_dbg(print, wiphy, fmt, ...)				\
+do {									\
+	if (print)							\
+		wiphy_dbg((wiphy), fmt, ##__VA_ARGS__);			\
+} while (0)
+
+#define sdata_info(sdata, fmt, ...)					\
+	_sdata_info(sdata, fmt, ##__VA_ARGS__)
+#define sdata_err(sdata, fmt, ...)					\
+	_sdata_err(sdata, fmt, ##__VA_ARGS__)
+#define sdata_dbg(sdata, fmt, ...)					\
+	_sdata_dbg(1, sdata, fmt, ##__VA_ARGS__)
+
+#define ht_dbg(sdata, fmt, ...)						\
+	_sdata_dbg(MAC80211_HT_DEBUG,					\
+		   sdata, fmt, ##__VA_ARGS__)
+
+#define ht_dbg_ratelimited(sdata, fmt, ...)				\
+	_sdata_dbg(MAC80211_HT_DEBUG && net_ratelimit(),		\
+		   sdata, fmt, ##__VA_ARGS__)
+
+#define ibss_dbg(sdata, fmt, ...)					\
+	_sdata_dbg(MAC80211_IBSS_DEBUG,					\
+		   sdata, fmt, ##__VA_ARGS__)
+
+#define ps_dbg(sdata, fmt, ...)						\
+	_sdata_dbg(MAC80211_PS_DEBUG,					\
+		   sdata, fmt, ##__VA_ARGS__)
+
+#define ps_dbg_hw(hw, fmt, ...)						\
+	_wiphy_dbg(MAC80211_PS_DEBUG,					\
+		   (hw)->wiphy, fmt, ##__VA_ARGS__)
+
+#define ps_dbg_ratelimited(sdata, fmt, ...)				\
+	_sdata_dbg(MAC80211_PS_DEBUG && net_ratelimit(),		\
+		   sdata, fmt, ##__VA_ARGS__)
+
+#define mpl_dbg(sdata, fmt, ...)					\
+	_sdata_dbg(MAC80211_MPL_DEBUG,					\
+		   sdata, fmt, ##__VA_ARGS__)
+
+#define mpath_dbg(sdata, fmt, ...)					\
+	_sdata_dbg(MAC80211_MPATH_DEBUG,				\
+		   sdata, fmt, ##__VA_ARGS__)
+
+#define mhwmp_dbg(sdata, fmt, ...)					\
+	_sdata_dbg(MAC80211_MHWMP_DEBUG,				\
+		   sdata, fmt, ##__VA_ARGS__)
+
+#define msync_dbg(sdata, fmt, ...)					\
+	_sdata_dbg(MAC80211_MESH_SYNC_DEBUG,				\
+		   sdata, fmt, ##__VA_ARGS__)
+
+#define tdls_dbg(sdata, fmt, ...)					\
+	_sdata_dbg(MAC80211_TDLS_DEBUG,					\
+		   sdata, fmt, ##__VA_ARGS__)
+
+#define sta_dbg(sdata, fmt, ...)					\
+	_sdata_dbg(MAC80211_STA_DEBUG,					\
+		   sdata, fmt, ##__VA_ARGS__)
+
+#define mlme_dbg(sdata, fmt, ...)					\
+	_sdata_dbg(MAC80211_MLME_DEBUG,					\
+		   sdata, fmt, ##__VA_ARGS__)
+
+#define mlme_dbg_ratelimited(sdata, fmt, ...)				\
+	_sdata_dbg(MAC80211_MLME_DEBUG && net_ratelimit(),		\
+		   sdata, fmt, ##__VA_ARGS__)
+
+#endif /* __MAC80211_DEBUG_H */
diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c
index 512c894..6d5aec9 100644
--- a/net/mac80211/debugfs_netdev.c
+++ b/net/mac80211/debugfs_netdev.c
@@ -695,6 +695,7 @@ void ieee80211_debugfs_rename_netdev(struct ieee80211_sub_if_data *sdata)
 
 	sprintf(buf, "netdev:%s", sdata->name);
 	if (!debugfs_rename(dir->d_parent, dir, dir->d_parent, buf))
-		pr_err("mac80211: debugfs: failed to rename debugfs "
-		       "dir to %s\n", buf);
+		sdata_err(sdata,
+			  "debugfs: failed to rename debugfs dir to %s\n",
+			  buf);
 }
diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c
index 6f8615c..4b4538d 100644
--- a/net/mac80211/ht.c
+++ b/net/mac80211/ht.c
@@ -305,12 +305,10 @@ void ieee80211_process_delba(struct ieee80211_sub_if_data *sdata,
 	tid = (params & IEEE80211_DELBA_PARAM_TID_MASK) >> 12;
 	initiator = (params & IEEE80211_DELBA_PARAM_INITIATOR_MASK) >> 11;
 
-#ifdef CONFIG_MAC80211_HT_DEBUG
-	net_dbg_ratelimited("delba from %pM (%s) tid %d reason code %d\n",
-			    mgmt->sa, initiator ? "initiator" : "recipient",
-			    tid,
-			    le16_to_cpu(mgmt->u.action.u.delba.reason_code));
-#endif /* CONFIG_MAC80211_HT_DEBUG */
+	ht_dbg_ratelimited(sdata, "delba from %pM (%s) tid %d reason code %d\n",
+			   mgmt->sa, initiator ? "initiator" : "recipient",
+			   tid,
+			   le16_to_cpu(mgmt->u.action.u.delba.reason_code));
 
 	if (initiator == WLAN_BACK_INITIATOR)
 		__ieee80211_stop_rx_ba_session(sta, tid, WLAN_BACK_INITIATOR, 0,
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index 8931110..5746d62 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -261,11 +261,7 @@ static struct sta_info *ieee80211_ibss_finish_sta(struct sta_info *sta,
 
 	memcpy(addr, sta->sta.addr, ETH_ALEN);
 
-#ifdef CONFIG_MAC80211_IBSS_DEBUG
-	wiphy_debug(sdata->local->hw.wiphy,
-		    "Adding new IBSS station %pM (dev=%s)\n",
-		    addr, sdata->name);
-#endif
+	ibss_dbg(sdata, "Adding new IBSS station %pM\n", addr);
 
 	sta_info_pre_move_state(sta, IEEE80211_STA_AUTH);
 	sta_info_pre_move_state(sta, IEEE80211_STA_ASSOC);
@@ -280,8 +276,9 @@ static struct sta_info *ieee80211_ibss_finish_sta(struct sta_info *sta,
 	if (sta_info_insert_rcu(sta))
 		return sta_info_get(sdata, addr);
 	if (auth && !sdata->u.ibss.auth_frame_registrations) {
-		ibss_vdbg("TX Auth SA=%pM DA=%pM BSSID=%pM (auth_transaction=1)\n",
-			  sdata->vif.addr, sdata->u.ibss.bssid, addr);
+		ibss_dbg(sdata,
+			 "TX Auth SA=%pM DA=%pM BSSID=%pM (auth_transaction=1)\n",
+			 sdata->vif.addr, sdata->u.ibss.bssid, addr);
 		ieee80211_send_auth(sdata, 1, WLAN_AUTH_OPEN, NULL, 0,
 				    addr, sdata->u.ibss.bssid, NULL, 0, 0);
 	}
@@ -304,7 +301,7 @@ ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata,
 	 * 	allow new one to be added.
 	 */
 	if (local->num_sta >= IEEE80211_IBSS_MAX_STA_ENTRIES) {
-		net_dbg_ratelimited("%s: No room for a new IBSS STA entry %pM\n",
+		net_info_ratelimited("%s: No room for a new IBSS STA entry %pM\n",
 				    sdata->name, addr);
 		rcu_read_lock();
 		return NULL;
@@ -351,9 +348,9 @@ static void ieee80211_rx_mgmt_auth_ibss(struct ieee80211_sub_if_data *sdata,
 
 	if (auth_alg != WLAN_AUTH_OPEN || auth_transaction != 1)
 		return;
-	ibss_vdbg("%s: RX Auth SA=%pM DA=%pM BSSID=%pM (auth_transaction=%d)\n",
-		  sdata->name, mgmt->sa, mgmt->da, mgmt->bssid,
-		  auth_transaction);
+	ibss_dbg(sdata,
+		 "RX Auth SA=%pM DA=%pM BSSID=%pM (auth_transaction=%d)\n",
+		 mgmt->sa, mgmt->da, mgmt->bssid, auth_transaction);
 	sta_info_destroy_addr(sdata, mgmt->sa);
 	ieee80211_ibss_add_sta(sdata, mgmt->bssid, mgmt->sa, 0, false);
 	rcu_read_unlock();
@@ -416,10 +413,10 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
 					ieee80211_mandatory_rates(local, band);
 
 				if (sta->sta.supp_rates[band] != prev_rates) {
-					ibss_vdbg("%s: updated supp_rates set for %pM based on beacon/probe_resp (0x%x -> 0x%x)\n",
-						  sdata->name, sta->sta.addr,
-						  prev_rates,
-						  sta->sta.supp_rates[band]);
+					ibss_dbg(sdata,
+						 "updated supp_rates set for %pM based on beacon/probe_resp (0x%x -> 0x%x)\n",
+						 sta->sta.addr, prev_rates,
+						 sta->sta.supp_rates[band]);
 					rates_updated = true;
 				}
 			} else {
@@ -534,16 +531,18 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
 		rx_timestamp = drv_get_tsf(local, sdata);
 	}
 
-	ibss_vdbg("RX beacon SA=%pM BSSID=%pM TSF=0x%llx BCN=0x%llx diff=%lld @%lu\n",
-		  mgmt->sa, mgmt->bssid,
-		  (unsigned long long)rx_timestamp,
-		  (unsigned long long)beacon_timestamp,
-		  (unsigned long long)(rx_timestamp - beacon_timestamp),
-		  jiffies);
+	ibss_dbg(sdata,
+		 "RX beacon SA=%pM BSSID=%pM TSF=0x%llx BCN=0x%llx diff=%lld @%lu\n",
+		 mgmt->sa, mgmt->bssid,
+		 (unsigned long long)rx_timestamp,
+		 (unsigned long long)beacon_timestamp,
+		 (unsigned long long)(rx_timestamp - beacon_timestamp),
+		 jiffies);
 
 	if (beacon_timestamp > rx_timestamp) {
-		ibss_vdbg("%s: beacon TSF higher than local TSF - IBSS merge with BSSID %pM\n",
-			  sdata->name, mgmt->bssid);
+		ibss_dbg(sdata,
+			 "beacon TSF higher than local TSF - IBSS merge with BSSID %pM\n",
+			 mgmt->bssid);
 		ieee80211_sta_join_ibss(sdata, bss);
 		supp_rates = ieee80211_sta_get_rates(local, elems, band, NULL);
 		ieee80211_ibss_add_sta(sdata, mgmt->bssid, mgmt->sa,
@@ -569,7 +568,7 @@ void ieee80211_ibss_rx_no_sta(struct ieee80211_sub_if_data *sdata,
 	 * 	allow new one to be added.
 	 */
 	if (local->num_sta >= IEEE80211_IBSS_MAX_STA_ENTRIES) {
-		net_dbg_ratelimited("%s: No room for a new IBSS STA entry %pM\n",
+		net_info_ratelimited("%s: No room for a new IBSS STA entry %pM\n",
 				    sdata->name, addr);
 		return;
 	}
@@ -645,8 +644,8 @@ static void ieee80211_sta_merge_ibss(struct ieee80211_sub_if_data *sdata)
 	if (ifibss->fixed_channel)
 		return;
 
-	pr_debug("%s: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)\n",
-		 sdata->name);
+	sdata_info(sdata,
+		   "No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)\n");
 
 	ieee80211_request_internal_scan(sdata,
 			ifibss->ssid, ifibss->ssid_len, NULL);
@@ -674,8 +673,7 @@ static void ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata)
 		bssid[0] |= 0x02;
 	}
 
-	pr_debug("%s: Creating new IBSS network, BSSID %pM\n",
-		 sdata->name, bssid);
+	sdata_info(sdata, "Creating new IBSS network, BSSID %pM\n", bssid);
 
 	capability = WLAN_CAPABILITY_IBSS;
 
@@ -706,8 +704,7 @@ static void ieee80211_sta_find_ibss(struct ieee80211_sub_if_data *sdata)
 	lockdep_assert_held(&ifibss->mtx);
 
 	active_ibss = ieee80211_sta_active_ibss(sdata);
-	ibss_vdbg("%s: sta_find_ibss (active_ibss=%d)\n",
-		  sdata->name, active_ibss);
+	ibss_dbg(sdata, "sta_find_ibss (active_ibss=%d)\n", active_ibss);
 
 	if (active_ibss)
 		return;
@@ -730,23 +727,24 @@ static void ieee80211_sta_find_ibss(struct ieee80211_sub_if_data *sdata)
 		struct ieee80211_bss *bss;
 
 		bss = (void *)cbss->priv;
-		ibss_vdbg("   sta_find_ibss: selected %pM current %pM\n",
-			  cbss->bssid, ifibss->bssid);
-		pr_debug("%s: Selected IBSS BSSID %pM based on configured SSID\n",
-			 sdata->name, cbss->bssid);
+		ibss_dbg(sdata,
+			 "sta_find_ibss: selected %pM current %pM\n",
+			 cbss->bssid, ifibss->bssid);
+		sdata_info(sdata,
+			   "Selected IBSS BSSID %pM based on configured SSID\n",
+			   cbss->bssid);
 
 		ieee80211_sta_join_ibss(sdata, bss);
 		ieee80211_rx_bss_put(local, bss);
 		return;
 	}
 
-	ibss_vdbg("   did not try to join ibss\n");
+	ibss_dbg(sdata, "sta_find_ibss: did not try to join ibss\n");
 
 	/* Selected IBSS not found in current scan results - try to scan */
 	if (time_after(jiffies, ifibss->last_scan_completed +
 					IEEE80211_SCAN_INTERVAL)) {
-		pr_debug("%s: Trigger new scan to find an IBSS to join\n",
-			 sdata->name);
+		sdata_info(sdata, "Trigger new scan to find an IBSS to join\n");
 
 		ieee80211_request_internal_scan(sdata,
 				ifibss->ssid, ifibss->ssid_len,
@@ -760,9 +758,8 @@ static void ieee80211_sta_find_ibss(struct ieee80211_sub_if_data *sdata)
 				ieee80211_sta_create_ibss(sdata);
 				return;
 			}
-			pr_debug("%s: IBSS not allowed on %d MHz\n",
-				 sdata->name,
-				 local->hw.conf.channel->center_freq);
+			sdata_info(sdata, "IBSS not allowed on %d MHz\n",
+				   local->hw.conf.channel->center_freq);
 
 			/* No IBSS found - decrease scan interval and continue
 			 * scanning. */
@@ -797,9 +794,9 @@ static void ieee80211_rx_mgmt_probe_req(struct ieee80211_sub_if_data *sdata,
 
 	tx_last_beacon = drv_tx_last_beacon(local);
 
-	ibss_vdbg("%s: RX ProbeReq SA=%pM DA=%pM BSSID=%pM (tx_last_beacon=%d)\n",
-		  sdata->name, mgmt->sa, mgmt->da,
-		  mgmt->bssid, tx_last_beacon);
+	ibss_dbg(sdata,
+		 "RX ProbeReq SA=%pM DA=%pM BSSID=%pM (tx_last_beacon=%d)\n",
+		 mgmt->sa, mgmt->da, mgmt->bssid, tx_last_beacon);
 
 	if (!tx_last_beacon && is_multicast_ether_addr(mgmt->da))
 		return;
@@ -812,8 +809,8 @@ static void ieee80211_rx_mgmt_probe_req(struct ieee80211_sub_if_data *sdata,
 	pos = mgmt->u.probe_req.variable;
 	if (pos[0] != WLAN_EID_SSID ||
 	    pos + 2 + pos[1] > end) {
-		ibss_vdbg("%s: Invalid SSID IE in ProbeReq from %pM\n",
-			  sdata->name, mgmt->sa);
+		ibss_dbg(sdata, "Invalid SSID IE in ProbeReq from %pM\n",
+			 mgmt->sa);
 		return;
 	}
 	if (pos[1] != 0 &&
@@ -830,7 +827,7 @@ static void ieee80211_rx_mgmt_probe_req(struct ieee80211_sub_if_data *sdata,
 
 	resp = (struct ieee80211_mgmt *) skb->data;
 	memcpy(resp->da, mgmt->sa, ETH_ALEN);
-	ibss_vdbg("%s: Sending ProbeResp to %pM\n", sdata->name, resp->da);
+	ibss_dbg(sdata, "Sending ProbeResp to %pM\n", resp->da);
 	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
 	ieee80211_tx_skb(sdata, skb);
 }
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 36ce2bb..f834a00 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -30,6 +30,7 @@
 #include <net/mac80211.h>
 #include "key.h"
 #include "sta_info.h"
+#include "debug.h"
 
 struct ieee80211_local;
 
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 728d3ea..5768803 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -57,9 +57,6 @@ static int ieee80211_change_mtu(struct net_device *dev, int new_mtu)
 		return -EINVAL;
 	}
 
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
-	pr_debug("%s: setting MTU %d\n", dev->name, new_mtu);
-#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
 	dev->mtu = new_mtu;
 	return 0;
 }
@@ -1223,7 +1220,7 @@ static void ieee80211_assign_perm_addr(struct ieee80211_local *local,
 
 		if (__ffs64(mask) + hweight64(mask) != fls64(mask)) {
 			/* not a contiguous mask ... not handled now! */
-			pr_debug("not contiguous\n");
+			pr_info("not contiguous\n");
 			break;
 		}
 
@@ -1414,10 +1411,6 @@ static u32 ieee80211_idle_off(struct ieee80211_local *local,
 	if (!(local->hw.conf.flags & IEEE80211_CONF_IDLE))
 		return 0;
 
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
-	wiphy_debug(local->hw.wiphy, "device no longer idle - %s\n", reason);
-#endif
-
 	local->hw.conf.flags &= ~IEEE80211_CONF_IDLE;
 	return IEEE80211_CONF_CHANGE_IDLE;
 }
@@ -1427,10 +1420,6 @@ static u32 ieee80211_idle_on(struct ieee80211_local *local)
 	if (local->hw.conf.flags & IEEE80211_CONF_IDLE)
 		return 0;
 
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
-	wiphy_debug(local->hw.wiphy, "device now idle\n");
-#endif
-
 	drv_flush(local, false);
 
 	local->hw.conf.flags |= IEEE80211_CONF_IDLE;
diff --git a/net/mac80211/key.c b/net/mac80211/key.c
index 5bb600d..b3b7e52 100644
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -139,7 +139,7 @@ static int ieee80211_key_enable_hw_accel(struct ieee80211_key *key)
 	}
 
 	if (ret != -ENOSPC && ret != -EOPNOTSUPP)
-		wiphy_err(key->local->hw.wiphy,
+		sdata_err(sdata,
 			  "failed to set key (%d, %pM) to hardware (%d)\n",
 			  key->conf.keyidx,
 			  sta ? sta->sta.addr : bcast_addr, ret);
@@ -186,7 +186,7 @@ static void ieee80211_key_disable_hw_accel(struct ieee80211_key *key)
 			  sta ? &sta->sta : NULL, &key->conf);
 
 	if (ret)
-		wiphy_err(key->local->hw.wiphy,
+		sdata_err(sdata,
 			  "failed to remove key (%d, %pM) from hardware (%d)\n",
 			  key->conf.keyidx,
 			  sta ? sta->sta.addr : bcast_addr, ret);
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index ae40a83..764593d 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -523,10 +523,6 @@ static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata,
 {
 	bool free_plinks;
 
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
-	pr_debug("%s: running mesh housekeeping\n", sdata->name);
-#endif
-
 	ieee80211_sta_expire(sdata, IEEE80211_MESH_PEER_INACTIVITY_LIMIT);
 	mesh_path_expire(sdata);
 
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index aed1821..fb7b6a1 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -13,13 +13,6 @@
 #include "wme.h"
 #include "mesh.h"
 
-#ifdef CONFIG_MAC80211_VERBOSE_MHWMP_DEBUG
-#define mhwmp_dbg(fmt, args...) \
-	pr_debug("Mesh HWMP (%s): " fmt "\n", sdata->name, ##args)
-#else
-#define mhwmp_dbg(fmt, args...)   do { (void)(0); } while (0)
-#endif
-
 #define TEST_FRAME_LEN	8192
 #define MAX_METRIC	0xffffffff
 #define ARITH_SHIFT	8
@@ -144,19 +137,19 @@ static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags,
 
 	switch (action) {
 	case MPATH_PREQ:
-		mhwmp_dbg("sending PREQ to %pM", target);
+		mhwmp_dbg(sdata, "sending PREQ to %pM\n", target);
 		ie_len = 37;
 		pos = skb_put(skb, 2 + ie_len);
 		*pos++ = WLAN_EID_PREQ;
 		break;
 	case MPATH_PREP:
-		mhwmp_dbg("sending PREP to %pM", target);
+		mhwmp_dbg(sdata, "sending PREP to %pM\n", target);
 		ie_len = 31;
 		pos = skb_put(skb, 2 + ie_len);
 		*pos++ = WLAN_EID_PREP;
 		break;
 	case MPATH_RANN:
-		mhwmp_dbg("sending RANN from %pM", orig_addr);
+		mhwmp_dbg(sdata, "sending RANN from %pM\n", orig_addr);
 		ie_len = sizeof(struct ieee80211_rann_ie);
 		pos = skb_put(skb, 2 + ie_len);
 		*pos++ = WLAN_EID_RANN;
@@ -535,10 +528,10 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata,
 	flags = PREQ_IE_FLAGS(preq_elem);
 	root_is_gate = !!(flags & RANN_FLAG_IS_GATE);
 
-	mhwmp_dbg("received PREQ from %pM", orig_addr);
+	mhwmp_dbg(sdata, "received PREQ from %pM\n", orig_addr);
 
 	if (ether_addr_equal(target_addr, sdata->vif.addr)) {
-		mhwmp_dbg("PREQ is for us");
+		mhwmp_dbg(sdata, "PREQ is for us\n");
 		forward = false;
 		reply = true;
 		metric = 0;
@@ -590,7 +583,7 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata,
 		lifetime = PREQ_IE_LIFETIME(preq_elem);
 		ttl = ifmsh->mshcfg.element_ttl;
 		if (ttl != 0) {
-			mhwmp_dbg("replying to the PREQ");
+			mhwmp_dbg(sdata, "replying to the PREQ\n");
 			mesh_path_sel_frame_tx(MPATH_PREP, 0, orig_addr,
 				cpu_to_le32(orig_sn), 0, target_addr,
 				cpu_to_le32(target_sn), mgmt->sa, 0, ttl,
@@ -611,7 +604,7 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata,
 			ifmsh->mshstats.dropped_frames_ttl++;
 			return;
 		}
-		mhwmp_dbg("forwarding the PREQ from %pM", orig_addr);
+		mhwmp_dbg(sdata, "forwarding the PREQ from %pM\n", orig_addr);
 		--ttl;
 		preq_id = PREQ_IE_PREQ_ID(preq_elem);
 		hopcount = PREQ_IE_HOPCOUNT(preq_elem) + 1;
@@ -658,7 +651,8 @@ static void hwmp_prep_frame_process(struct ieee80211_sub_if_data *sdata,
 	u8 next_hop[ETH_ALEN];
 	u32 target_sn, orig_sn, lifetime;
 
-	mhwmp_dbg("received PREP from %pM", PREP_IE_ORIG_ADDR(prep_elem));
+	mhwmp_dbg(sdata, "received PREP from %pM\n",
+		  PREP_IE_ORIG_ADDR(prep_elem));
 
 	orig_addr = PREP_IE_ORIG_ADDR(prep_elem);
 	if (ether_addr_equal(orig_addr, sdata->vif.addr))
@@ -784,8 +778,9 @@ static void hwmp_rann_frame_process(struct ieee80211_sub_if_data *sdata,
 	if (ether_addr_equal(orig_addr, sdata->vif.addr))
 		return;
 
-	mhwmp_dbg("received RANN from %pM via neighbour %pM (is_gate=%d)",
-			orig_addr, mgmt->sa, root_is_gate);
+	mhwmp_dbg(sdata,
+		  "received RANN from %pM via neighbour %pM (is_gate=%d)\n",
+		  orig_addr, mgmt->sa, root_is_gate);
 
 	rcu_read_lock();
 	sta = sta_info_get(sdata, mgmt->sa);
@@ -818,8 +813,9 @@ static void hwmp_rann_frame_process(struct ieee80211_sub_if_data *sdata,
 				  root_path_confirmation_jiffies(sdata)) ||
 	     time_before(jiffies, mpath->last_preq_to_root))) &&
 	     !(mpath->flags & MESH_PATH_FIXED) && (ttl != 0)) {
-		mhwmp_dbg("%s time to refresh root mpath %pM", sdata->name,
-							       orig_addr);
+		mhwmp_dbg(sdata,
+			  "time to refresh root mpath %pM\n",
+			  orig_addr);
 		mesh_queue_preq(mpath, PREQ_Q_F_START | PREQ_Q_F_REFRESH);
 		mpath->last_preq_to_root = jiffies;
 	}
@@ -926,7 +922,7 @@ static void mesh_queue_preq(struct mesh_path *mpath, u8 flags)
 
 	preq_node = kmalloc(sizeof(struct mesh_preq_queue), GFP_ATOMIC);
 	if (!preq_node) {
-		mhwmp_dbg("could not allocate PREQ node");
+		mhwmp_dbg(sdata, "could not allocate PREQ node\n");
 		return;
 	}
 
@@ -935,7 +931,7 @@ static void mesh_queue_preq(struct mesh_path *mpath, u8 flags)
 		spin_unlock_bh(&ifmsh->mesh_preq_queue_lock);
 		kfree(preq_node);
 		if (printk_ratelimit())
-			mhwmp_dbg("PREQ node queue full");
+			mhwmp_dbg(sdata, "PREQ node queue full\n");
 		return;
 	}
 
@@ -1183,7 +1179,7 @@ void mesh_path_timer(unsigned long data)
 		if (!mpath->is_gate && mesh_gate_num(sdata) > 0) {
 			ret = mesh_path_send_to_gates(mpath);
 			if (ret)
-				mhwmp_dbg("no gate was reachable");
+				mhwmp_dbg(sdata, "no gate was reachable\n");
 		} else
 			mesh_path_flush_pending(mpath);
 	}
@@ -1221,7 +1217,7 @@ mesh_path_tx_root_frame(struct ieee80211_sub_if_data *sdata)
 				0, cpu_to_le32(ifmsh->preq_id++), sdata);
 		break;
 	default:
-		mhwmp_dbg("Proactive mechanism not supported");
+		mhwmp_dbg(sdata, "Proactive mechanism not supported\n");
 		return;
 	}
 }
diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c
index 572f706..c9ae931 100644
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -18,12 +18,6 @@
 #include "ieee80211_i.h"
 #include "mesh.h"
 
-#ifdef CONFIG_MAC80211_VERBOSE_MPATH_DEBUG
-#define mpath_dbg(fmt, args...)	pr_debug(fmt, ##args)
-#else
-#define mpath_dbg(fmt, args...)	do { (void)(0); } while (0)
-#endif
-
 /* There will be initially 2^INIT_PATHS_SIZE_ORDER buckets */
 #define INIT_PATHS_SIZE_ORDER	2
 
@@ -322,9 +316,8 @@ static void mesh_path_move_to_queue(struct mesh_path *gate_mpath,
 
 	spin_lock_irqsave(&gate_mpath->frame_queue.lock, flags);
 	skb_queue_splice(&gateq, &gate_mpath->frame_queue);
-	mpath_dbg("Mpath queue for gate %pM has %d frames\n",
-			gate_mpath->dst,
-			skb_queue_len(&gate_mpath->frame_queue));
+	mpath_dbg(gate_mpath->sdata, "Mpath queue for gate %pM has %d frames\n",
+		  gate_mpath->dst, skb_queue_len(&gate_mpath->frame_queue));
 	spin_unlock_irqrestore(&gate_mpath->frame_queue.lock, flags);
 
 	if (!copy)
@@ -446,9 +439,9 @@ int mesh_path_add_gate(struct mesh_path *mpath)
 	hlist_add_head_rcu(&new_gate->list, tbl->known_gates);
 	spin_unlock_bh(&tbl->gates_lock);
 	rcu_read_unlock();
-	mpath_dbg("Mesh path (%s): Recorded new gate: %pM. %d known gates\n",
-		  mpath->sdata->name, mpath->dst,
-		  mpath->sdata->u.mesh.num_gates);
+	mpath_dbg(mpath->sdata,
+		  "Mesh path: Recorded new gate: %pM. %d known gates\n",
+		  mpath->dst, mpath->sdata->u.mesh.num_gates);
 	return 0;
 err_rcu:
 	rcu_read_unlock();
@@ -477,8 +470,8 @@ static int mesh_gate_del(struct mesh_table *tbl, struct mesh_path *mpath)
 			spin_unlock_bh(&tbl->gates_lock);
 			mpath->sdata->u.mesh.num_gates--;
 			mpath->is_gate = false;
-			mpath_dbg("Mesh path (%s): Deleted gate: %pM. "
-				  "%d known gates\n", mpath->sdata->name,
+			mpath_dbg(mpath->sdata,
+				  "Mesh path: Deleted gate: %pM. %d known gates\n",
 				  mpath->dst, mpath->sdata->u.mesh.num_gates);
 			break;
 		}
@@ -946,19 +939,20 @@ int mesh_path_send_to_gates(struct mesh_path *mpath)
 			continue;
 
 		if (gate->mpath->flags & MESH_PATH_ACTIVE) {
-			mpath_dbg("Forwarding to %pM\n", gate->mpath->dst);
+			mpath_dbg(sdata, "Forwarding to %pM\n", gate->mpath->dst);
 			mesh_path_move_to_queue(gate->mpath, from_mpath, copy);
 			from_mpath = gate->mpath;
 			copy = true;
 		} else {
-			mpath_dbg("Not forwarding %p\n", gate->mpath);
-			mpath_dbg("flags %x\n", gate->mpath->flags);
+			mpath_dbg(sdata,
+				  "Not forwarding %p (flags %#x)\n",
+				  gate->mpath, gate->mpath->flags);
 		}
 	}
 
 	hlist_for_each_entry_rcu(gate, n, known_gates, list)
 		if (gate->mpath->sdata == sdata) {
-			mpath_dbg("Sending to %pM\n", gate->mpath->dst);
+			mpath_dbg(sdata, "Sending to %pM\n", gate->mpath->dst);
 			mesh_path_tx_pending(gate->mpath);
 		}
 
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index be4fad1..a1dbd15 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -13,12 +13,6 @@
 #include "rate.h"
 #include "mesh.h"
 
-#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
-#define mpl_dbg(fmt, args...)	pr_debug(fmt, ##args)
-#else
-#define mpl_dbg(fmt, args...)	do { (void)(0); } while (0)
-#endif
-
 #define PLINK_GET_LLID(p) (p + 2)
 #define PLINK_GET_PLID(p) (p + 4)
 
@@ -134,12 +128,14 @@ static u32 mesh_set_ht_prot_mode(struct ieee80211_sub_if_data *sdata)
 
 		switch (sta->ch_type) {
 		case NL80211_CHAN_NO_HT:
-			mpl_dbg("mesh_plink %pM: nonHT sta (%pM) is present",
+			mpl_dbg(sdata,
+				"mesh_plink %pM: nonHT sta (%pM) is present\n",
 				sdata->vif.addr, sta->sta.addr);
 			non_ht_sta = true;
 			goto out;
 		case NL80211_CHAN_HT20:
-			mpl_dbg("mesh_plink %pM: HT20 sta (%pM) is present",
+			mpl_dbg(sdata,
+				"mesh_plink %pM: HT20 sta (%pM) is present\n",
 				sdata->vif.addr, sta->sta.addr);
 			ht20_sta = true;
 		default:
@@ -160,7 +156,8 @@ out:
 		sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
 		sdata->u.mesh.mshcfg.ht_opmode = ht_opmode;
 		changed = BSS_CHANGED_HT;
-		mpl_dbg("mesh_plink %pM: protection mode changed to %d",
+		mpl_dbg(sdata,
+			"mesh_plink %pM: protection mode changed to %d\n",
 			sdata->vif.addr, ht_opmode);
 	}
 
@@ -437,7 +434,8 @@ static void mesh_plink_timer(unsigned long data)
 		spin_unlock_bh(&sta->lock);
 		return;
 	}
-	mpl_dbg("Mesh plink timer for %pM fired on state %d\n",
+	mpl_dbg(sta->sdata,
+		"Mesh plink timer for %pM fired on state %d\n",
 		sta->sta.addr, sta->plink_state);
 	reason = 0;
 	llid = sta->llid;
@@ -450,7 +448,8 @@ static void mesh_plink_timer(unsigned long data)
 		/* retry timer */
 		if (sta->plink_retries < dot11MeshMaxRetries(sdata)) {
 			u32 rand;
-			mpl_dbg("Mesh plink for %pM (retry, timeout): %d %d\n",
+			mpl_dbg(sta->sdata,
+				"Mesh plink for %pM (retry, timeout): %d %d\n",
 				sta->sta.addr, sta->plink_retries,
 				sta->plink_timeout);
 			get_random_bytes(&rand, sizeof(u32));
@@ -530,7 +529,8 @@ int mesh_plink_open(struct sta_info *sta)
 	sta->plink_state = NL80211_PLINK_OPN_SNT;
 	mesh_plink_timer_set(sta, dot11MeshRetryTimeout(sdata));
 	spin_unlock_bh(&sta->lock);
-	mpl_dbg("Mesh plink: starting establishment with %pM\n",
+	mpl_dbg(sdata,
+		"Mesh plink: starting establishment with %pM\n",
 		sta->sta.addr);
 
 	return mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_OPEN,
@@ -565,7 +565,6 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 	u8 *baseaddr;
 	u32 changed = 0;
 	__le16 plid, llid, reason;
-#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
 	static const char *mplstates[] = {
 		[NL80211_PLINK_LISTEN] = "LISTEN",
 		[NL80211_PLINK_OPN_SNT] = "OPN-SNT",
@@ -575,14 +574,14 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 		[NL80211_PLINK_HOLDING] = "HOLDING",
 		[NL80211_PLINK_BLOCKED] = "BLOCKED"
 	};
-#endif
 
 	/* need action_code, aux */
 	if (len < IEEE80211_MIN_ACTION_SIZE + 3)
 		return;
 
 	if (is_multicast_ether_addr(mgmt->da)) {
-		mpl_dbg("Mesh plink: ignore frame from multicast address");
+		mpl_dbg(sdata,
+			"Mesh plink: ignore frame from multicast address\n");
 		return;
 	}
 
@@ -595,12 +594,14 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 	}
 	ieee802_11_parse_elems(baseaddr, len - baselen, &elems);
 	if (!elems.peering) {
-		mpl_dbg("Mesh plink: missing necessary peer link ie\n");
+		mpl_dbg(sdata,
+			"Mesh plink: missing necessary peer link ie\n");
 		return;
 	}
 	if (elems.rsn_len &&
 			sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE) {
-		mpl_dbg("Mesh plink: can't establish link with secure peer\n");
+		mpl_dbg(sdata,
+			"Mesh plink: can't establish link with secure peer\n");
 		return;
 	}
 
@@ -610,14 +611,15 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 	    (ftype == WLAN_SP_MESH_PEERING_CONFIRM && ie_len != 6) ||
 	    (ftype == WLAN_SP_MESH_PEERING_CLOSE && ie_len != 6
 							&& ie_len != 8)) {
-		mpl_dbg("Mesh plink: incorrect plink ie length %d %d\n",
-		    ftype, ie_len);
+		mpl_dbg(sdata,
+			"Mesh plink: incorrect plink ie length %d %d\n",
+			ftype, ie_len);
 		return;
 	}
 
 	if (ftype != WLAN_SP_MESH_PEERING_CLOSE &&
 				(!elems.mesh_id || !elems.mesh_config)) {
-		mpl_dbg("Mesh plink: missing necessary ie\n");
+		mpl_dbg(sdata, "Mesh plink: missing necessary ie\n");
 		return;
 	}
 	/* Note the lines below are correct, the llid in the frame is the plid
@@ -632,21 +634,21 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 
 	sta = sta_info_get(sdata, mgmt->sa);
 	if (!sta && ftype != WLAN_SP_MESH_PEERING_OPEN) {
-		mpl_dbg("Mesh plink: cls or cnf from unknown peer\n");
+		mpl_dbg(sdata, "Mesh plink: cls or cnf from unknown peer\n");
 		rcu_read_unlock();
 		return;
 	}
 
 	if (ftype == WLAN_SP_MESH_PEERING_OPEN &&
 	    !rssi_threshold_check(sta, sdata)) {
-		mpl_dbg("Mesh plink: %pM does not meet rssi threshold\n",
+		mpl_dbg(sdata, "Mesh plink: %pM does not meet rssi threshold\n",
 			mgmt->sa);
 		rcu_read_unlock();
 		return;
 	}
 
 	if (sta && !test_sta_flag(sta, WLAN_STA_AUTH)) {
-		mpl_dbg("Mesh plink: Action frame from non-authed peer\n");
+		mpl_dbg(sdata, "Mesh plink: Action frame from non-authed peer\n");
 		rcu_read_unlock();
 		return;
 	}
@@ -683,7 +685,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 	} else if (!sta) {
 		/* ftype == WLAN_SP_MESH_PEERING_OPEN */
 		if (!mesh_plink_free_count(sdata)) {
-			mpl_dbg("Mesh plink error: no more free plinks\n");
+			mpl_dbg(sdata, "Mesh plink error: no more free plinks\n");
 			rcu_read_unlock();
 			return;
 		}
@@ -724,7 +726,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 				event = CLS_ACPT;
 			break;
 		default:
-			mpl_dbg("Mesh plink: unknown frame subtype\n");
+			mpl_dbg(sdata, "Mesh plink: unknown frame subtype\n");
 			rcu_read_unlock();
 			return;
 		}
@@ -734,13 +736,14 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 		/* allocate sta entry if necessary and update info */
 		sta = mesh_peer_init(sdata, mgmt->sa, &elems);
 		if (!sta) {
-			mpl_dbg("Mesh plink: failed to init peer!\n");
+			mpl_dbg(sdata, "Mesh plink: failed to init peer!\n");
 			rcu_read_unlock();
 			return;
 		}
 	}
 
-	mpl_dbg("Mesh plink (peer, state, llid, plid, event): %pM %s %d %d %d\n",
+	mpl_dbg(sdata,
+		"Mesh plink (peer, state, llid, plid, event): %pM %s %d %d %d\n",
 		mgmt->sa, mplstates[sta->plink_state],
 		le16_to_cpu(sta->llid), le16_to_cpu(sta->plid),
 		event);
@@ -851,7 +854,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 			mesh_plink_inc_estab_count(sdata);
 			changed |= mesh_set_ht_prot_mode(sdata);
 			changed |= BSS_CHANGED_BEACON;
-			mpl_dbg("Mesh plink with %pM ESTABLISHED\n",
+			mpl_dbg(sdata, "Mesh plink with %pM ESTABLISHED\n",
 				sta->sta.addr);
 			break;
 		default:
@@ -887,7 +890,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 			mesh_plink_inc_estab_count(sdata);
 			changed |= mesh_set_ht_prot_mode(sdata);
 			changed |= BSS_CHANGED_BEACON;
-			mpl_dbg("Mesh plink with %pM ESTABLISHED\n",
+			mpl_dbg(sdata, "Mesh plink with %pM ESTABLISHED\n",
 				sta->sta.addr);
 			mesh_plink_frame_tx(sdata,
 					    WLAN_SP_MESH_PEERING_CONFIRM,
diff --git a/net/mac80211/mesh_sync.c b/net/mac80211/mesh_sync.c
index 0ccdad4..accfa00 100644
--- a/net/mac80211/mesh_sync.c
+++ b/net/mac80211/mesh_sync.c
@@ -12,13 +12,6 @@
 #include "mesh.h"
 #include "driver-ops.h"
 
-#ifdef CONFIG_MAC80211_VERBOSE_MESH_SYNC_DEBUG
-#define msync_dbg(fmt, args...) \
-	pr_debug("Mesh sync (%s): " fmt "\n", sdata->name, ##args)
-#else
-#define msync_dbg(fmt, args...)   do { (void)(0); } while (0)
-#endif
-
 /* This is not in the standard.  It represents a tolerable tbtt drift below
  * which we do no TSF adjustment.
  */
@@ -65,14 +58,14 @@ void mesh_sync_adjust_tbtt(struct ieee80211_sub_if_data *sdata)
 	spin_lock_bh(&ifmsh->sync_offset_lock);
 
 	if (ifmsh->sync_offset_clockdrift_max < beacon_int_fraction) {
-		msync_dbg("TBTT : max clockdrift=%lld; adjusting",
-			(long long) ifmsh->sync_offset_clockdrift_max);
+		msync_dbg(sdata, "TBTT : max clockdrift=%lld; adjusting\n",
+			  (long long) ifmsh->sync_offset_clockdrift_max);
 		tsfdelta = -ifmsh->sync_offset_clockdrift_max;
 		ifmsh->sync_offset_clockdrift_max = 0;
 	} else {
-		msync_dbg("TBTT : max clockdrift=%lld; adjusting by %llu",
-			(long long) ifmsh->sync_offset_clockdrift_max,
-			(unsigned long long) beacon_int_fraction);
+		msync_dbg(sdata, "TBTT : max clockdrift=%lld; adjusting by %llu\n",
+			  (long long) ifmsh->sync_offset_clockdrift_max,
+			  (unsigned long long) beacon_int_fraction);
 		tsfdelta = -beacon_int_fraction;
 		ifmsh->sync_offset_clockdrift_max -= beacon_int_fraction;
 	}
@@ -120,7 +113,7 @@ static void mesh_sync_offset_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
 
 	if (elems->mesh_config && mesh_peer_tbtt_adjusting(elems)) {
 		clear_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN);
-		msync_dbg("STA %pM : is adjusting TBTT", sta->sta.addr);
+		msync_dbg(sdata, "STA %pM : is adjusting TBTT\n", sta->sta.addr);
 		goto no_sync;
 	}
 
@@ -169,7 +162,8 @@ static void mesh_sync_offset_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
 	if (test_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN)) {
 		s64 t_clockdrift = sta->t_offset_setpoint
 				   - sta->t_offset;
-		msync_dbg("STA %pM : sta->t_offset=%lld, sta->t_offset_setpoint=%lld, t_clockdrift=%lld",
+		msync_dbg(sdata,
+			  "STA %pM : sta->t_offset=%lld, sta->t_offset_setpoint=%lld, t_clockdrift=%lld\n",
 			  sta->sta.addr,
 			  (long long) sta->t_offset,
 			  (long long)
@@ -178,7 +172,8 @@ static void mesh_sync_offset_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
 
 		if (t_clockdrift > TOFFSET_MAXIMUM_ADJUSTMENT ||
 			t_clockdrift < -TOFFSET_MAXIMUM_ADJUSTMENT) {
-			msync_dbg("STA %pM : t_clockdrift=%lld too large, setpoint reset",
+			msync_dbg(sdata,
+				  "STA %pM : t_clockdrift=%lld too large, setpoint reset\n",
 				  sta->sta.addr,
 				  (long long) t_clockdrift);
 			clear_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN);
@@ -197,8 +192,8 @@ static void mesh_sync_offset_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
 	} else {
 		sta->t_offset_setpoint = sta->t_offset - TOFFSET_SET_MARGIN;
 		set_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN);
-		msync_dbg("STA %pM : offset was invalid, "
-			  " sta->t_offset=%lld",
+		msync_dbg(sdata,
+			  "STA %pM : offset was invalid, sta->t_offset=%lld\n",
 			  sta->sta.addr,
 			  (long long) sta->t_offset);
 		rcu_read_unlock();
@@ -226,17 +221,15 @@ static void mesh_sync_offset_adjust_tbtt(struct ieee80211_sub_if_data *sdata)
 		 * to the driver tsf setter, we punt
 		 * the tsf adjustment to the mesh tasklet
 		 */
-		msync_dbg("TBTT : kicking off TBTT "
-			  "adjustment with "
-			  "clockdrift_max=%lld",
-		  ifmsh->sync_offset_clockdrift_max);
+		msync_dbg(sdata,
+			  "TBTT : kicking off TBTT adjustment with clockdrift_max=%lld\n",
+			  ifmsh->sync_offset_clockdrift_max);
 		set_bit(MESH_WORK_DRIFT_ADJUST,
 			&ifmsh->wrkq_flags);
 	} else {
-		msync_dbg("TBTT : max clockdrift=%lld; "
-			  "too small to adjust",
-			  (long long)
-		       ifmsh->sync_offset_clockdrift_max);
+		msync_dbg(sdata,
+			  "TBTT : max clockdrift=%lld; too small to adjust\n",
+			  (long long)ifmsh->sync_offset_clockdrift_max);
 		ifmsh->sync_offset_clockdrift_max = 0;
 	}
 	spin_unlock_bh(&ifmsh->sync_offset_lock);
@@ -268,7 +261,7 @@ static void mesh_sync_vendor_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
 	const u8 *oui;
 
 	WARN_ON(sdata->u.mesh.mesh_sp_id != IEEE80211_SYNC_METHOD_VENDOR);
-	msync_dbg("called mesh_sync_vendor_rx_bcn_presp");
+	msync_dbg(sdata, "called mesh_sync_vendor_rx_bcn_presp\n");
 	oui = mesh_get_vendor_oui(sdata);
 	/*  here you would implement the vendor offset tracking for this oui */
 }
@@ -278,7 +271,7 @@ static void mesh_sync_vendor_adjust_tbtt(struct ieee80211_sub_if_data *sdata)
 	const u8 *oui;
 
 	WARN_ON(sdata->u.mesh.mesh_sp_id != IEEE80211_SYNC_METHOD_VENDOR);
-	msync_dbg("called mesh_sync_vendor_adjust_tbtt");
+	msync_dbg(sdata, "called mesh_sync_vendor_adjust_tbtt\n");
 	oui = mesh_get_vendor_oui(sdata);
 	/*  here you would implement the vendor tsf adjustment for this oui */
 }
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 2b450f5..e11cd0e 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1186,19 +1186,16 @@ static void ieee80211_sta_wmm_params(struct ieee80211_local *local,
 		params.txop = get_unaligned_le16(pos + 2);
 		params.uapsd = uapsd;
 
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
-		wiphy_debug(local->hw.wiphy,
-			    "WMM queue=%d aci=%d acm=%d aifs=%d "
-			    "cWmin=%d cWmax=%d txop=%d uapsd=%d\n",
-			    queue, aci, acm,
-			    params.aifs, params.cw_min, params.cw_max,
-			    params.txop, params.uapsd);
-#endif
+		mlme_dbg(sdata,
+			 "WMM queue=%d aci=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d\n",
+			 queue, aci, acm,
+			 params.aifs, params.cw_min, params.cw_max,
+			 params.txop, params.uapsd);
 		sdata->tx_conf[queue] = params;
 		if (drv_conf_tx(local, sdata, queue, &params))
-			wiphy_debug(local->hw.wiphy,
-				    "failed to set TX queue parameters for queue %d\n",
-				    queue);
+			sdata_err(sdata,
+				  "failed to set TX queue parameters for queue %d\n",
+				  queue);
 	}
 
 	/* enable WMM or activate new settings */
@@ -1565,11 +1562,10 @@ static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata,
 		goto out;
 	}
 
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
 	if (beacon)
-		net_dbg_ratelimited("%s: detected beacon loss from AP - sending probe request\n",
-				    sdata->name);
-#endif
+		mlme_dbg_ratelimited(sdata,
+				     "detected beacon loss from AP - sending probe request\n");
+
 	ieee80211_cqm_rssi_notify(&sdata->vif,
 		NL80211_CQM_RSSI_BEACON_LOSS_EVENT, GFP_KERNEL);
 
@@ -1654,7 +1650,7 @@ static void __ieee80211_connection_loss(struct ieee80211_sub_if_data *sdata)
 
 	memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
 
-	pr_debug("%s: Connection to AP %pM lost\n", sdata->name, bssid);
+	sdata_info(sdata, "Connection to AP %pM lost\n", bssid);
 
 	ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
 			       WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
@@ -1788,8 +1784,8 @@ ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata,
 		return RX_MGMT_NONE;
 
 	if (status_code != WLAN_STATUS_SUCCESS) {
-		pr_debug("%s: %pM denied authentication (status %d)\n",
-			 sdata->name, mgmt->sa, status_code);
+		sdata_info(sdata, "%pM denied authentication (status %d)\n",
+			   mgmt->sa, status_code);
 		ieee80211_destroy_auth_data(sdata, false);
 		return RX_MGMT_CFG80211_RX_AUTH;
 	}
@@ -1812,7 +1808,7 @@ ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata,
 		return RX_MGMT_NONE;
 	}
 
-	pr_debug("%s: authenticated\n", sdata->name);
+	sdata_info(sdata, "authenticated\n");
 	ifmgd->auth_data->done = true;
 	ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC;
 	run_again(ifmgd, ifmgd->auth_data->timeout);
@@ -1825,7 +1821,7 @@ ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata,
 		goto out_err;
 	}
 	if (sta_info_move_state(sta, IEEE80211_STA_AUTH)) {
-		pr_debug("%s: failed moving %pM to auth\n", sdata->name, bssid);
+		sdata_info(sdata, "failed moving %pM to auth\n", bssid);
 		goto out_err;
 	}
 	mutex_unlock(&sdata->local->sta_mtx);
@@ -1859,8 +1855,8 @@ ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
 
 	reason_code = le16_to_cpu(mgmt->u.deauth.reason_code);
 
-	pr_debug("%s: deauthenticated from %pM (Reason: %u)\n",
-		 sdata->name, bssid, reason_code);
+	sdata_info(sdata, "deauthenticated from %pM (Reason: %u)\n",
+		   bssid, reason_code);
 
 	ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
 
@@ -1890,8 +1886,8 @@ ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
 
 	reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
 
-	pr_debug("%s: disassociated from %pM (Reason: %u)\n",
-		 sdata->name, mgmt->sa, reason_code);
+	sdata_info(sdata, "disassociated from %pM (Reason: %u)\n",
+		   mgmt->sa, reason_code);
 
 	ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
 
@@ -1983,15 +1979,15 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
 	capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
 
 	if ((aid & (BIT(15) | BIT(14))) != (BIT(15) | BIT(14)))
-		pr_debug("%s: invalid AID value 0x%x; bits 15:14 not set\n",
-			 sdata->name, aid);
+		sdata_info(sdata, "invalid AID value 0x%x; bits 15:14 not set\n",
+			   aid);
 	aid &= ~(BIT(15) | BIT(14));
 
 	ifmgd->broken_ap = false;
 
 	if (aid == 0 || aid > IEEE80211_MAX_AID) {
-		pr_debug("%s: invalid AID value %d (out of range), turn off PS\n",
-			 sdata->name, aid);
+		sdata_info(sdata, "invalid AID value %d (out of range), turn off PS\n",
+			   aid);
 		aid = 0;
 		ifmgd->broken_ap = true;
 	}
@@ -2000,8 +1996,7 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
 	ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems);
 
 	if (!elems.supp_rates) {
-		pr_debug("%s: no SuppRates element in AssocResp\n",
-			 sdata->name);
+		sdata_info(sdata, "no SuppRates element in AssocResp\n");
 		return false;
 	}
 
@@ -2041,8 +2036,9 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
 	if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT))
 		err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED);
 	if (err) {
-		pr_debug("%s: failed to move station %pM to desired state\n",
-			 sdata->name, sta->sta.addr);
+		sdata_info(sdata,
+			   "failed to move station %pM to desired state\n",
+			   sta->sta.addr);
 		WARN_ON(__sta_info_destroy(sta));
 		mutex_unlock(&sdata->local->sta_mtx);
 		return false;
@@ -2125,9 +2121,10 @@ ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 	status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code);
 	aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
 
-	pr_debug("%s: RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n",
-		 sdata->name, reassoc ? "Rea" : "A", mgmt->sa,
-		 capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14))));
+	sdata_info(sdata,
+		   "RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n",
+		   reassoc ? "Rea" : "A", mgmt->sa,
+		   capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14))));
 
 	pos = mgmt->u.assoc_resp.variable;
 	ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems);
@@ -2138,8 +2135,9 @@ ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 		u32 tu, ms;
 		tu = get_unaligned_le32(elems.timeout_int + 1);
 		ms = tu * 1024 / 1000;
-		pr_debug("%s: %pM rejected association temporarily; comeback duration %u TU (%u ms)\n",
-			 sdata->name, mgmt->sa, tu, ms);
+		sdata_info(sdata,
+			   "%pM rejected association temporarily; comeback duration %u TU (%u ms)\n",
+			   mgmt->sa, tu, ms);
 		assoc_data->timeout = jiffies + msecs_to_jiffies(ms);
 		if (ms > IEEE80211_ASSOC_TIMEOUT)
 			run_again(ifmgd, assoc_data->timeout);
@@ -2149,11 +2147,11 @@ ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 	*bss = assoc_data->bss;
 
 	if (status_code != WLAN_STATUS_SUCCESS) {
-		pr_debug("%s: %pM denied association (code=%d)\n",
-			 sdata->name, mgmt->sa, status_code);
+		sdata_info(sdata, "%pM denied association (code=%d)\n",
+			   mgmt->sa, status_code);
 		ieee80211_destroy_assoc_data(sdata, false);
 	} else {
-		pr_debug("%s: associated\n", sdata->name);
+		sdata_info(sdata, "associated\n");
 
 		if (!ieee80211_assoc_success(sdata, *bss, mgmt, len)) {
 			/* oops -- internal error -- send timeout for now */
@@ -2261,7 +2259,7 @@ static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata,
 	if (ifmgd->auth_data && !ifmgd->auth_data->bss->proberesp_ies &&
 	    ether_addr_equal(mgmt->bssid, ifmgd->auth_data->bss->bssid)) {
 		/* got probe response, continue with auth */
-		pr_debug("%s: direct probe responded\n", sdata->name);
+		sdata_info(sdata, "direct probe responded\n");
 		ifmgd->auth_data->tries = 0;
 		ifmgd->auth_data->timeout = jiffies;
 		run_again(ifmgd, ifmgd->auth_data->timeout);
@@ -2397,10 +2395,8 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 	}
 
 	if (ifmgd->flags & IEEE80211_STA_BEACON_POLL) {
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
-		net_dbg_ratelimited("%s: cancelling probereq poll due to a received beacon\n",
-				    sdata->name);
-#endif
+		mlme_dbg_ratelimited(sdata,
+				     "cancelling probereq poll due to a received beacon\n");
 		mutex_lock(&local->mtx);
 		ifmgd->flags &= ~IEEE80211_STA_BEACON_POLL;
 		ieee80211_run_deferred_scan(local);
@@ -2625,8 +2621,8 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata)
 	auth_data->tries++;
 
 	if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) {
-		pr_debug("%s: authentication with %pM timed out\n",
-			 sdata->name, auth_data->bss->bssid);
+		sdata_info(sdata, "authentication with %pM timed out\n",
+			   auth_data->bss->bssid);
 
 		/*
 		 * Most likely AP is not in the range so remove the
@@ -2638,9 +2634,9 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata)
 	}
 
 	if (auth_data->bss->proberesp_ies) {
-		pr_debug("%s: send auth to %pM (try %d/%d)\n",
-			 sdata->name, auth_data->bss->bssid, auth_data->tries,
-			 IEEE80211_AUTH_MAX_TRIES);
+		sdata_info(sdata, "send auth to %pM (try %d/%d)\n",
+			   auth_data->bss->bssid, auth_data->tries,
+			   IEEE80211_AUTH_MAX_TRIES);
 
 		auth_data->expected_transaction = 2;
 		ieee80211_send_auth(sdata, 1, auth_data->algorithm,
@@ -2650,9 +2646,9 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata)
 	} else {
 		const u8 *ssidie;
 
-		pr_debug("%s: direct probe to %pM (try %d/%i)\n",
-			 sdata->name, auth_data->bss->bssid, auth_data->tries,
-			 IEEE80211_AUTH_MAX_TRIES);
+		sdata_info(sdata, "direct probe to %pM (try %d/%i)\n",
+			   auth_data->bss->bssid, auth_data->tries,
+			   IEEE80211_AUTH_MAX_TRIES);
 
 		ssidie = ieee80211_bss_get_ie(auth_data->bss, WLAN_EID_SSID);
 		if (!ssidie)
@@ -2680,8 +2676,8 @@ static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata)
 
 	assoc_data->tries++;
 	if (assoc_data->tries > IEEE80211_ASSOC_MAX_TRIES) {
-		pr_debug("%s: association with %pM timed out\n",
-			 sdata->name, assoc_data->bss->bssid);
+		sdata_info(sdata, "association with %pM timed out\n",
+			   assoc_data->bss->bssid);
 
 		/*
 		 * Most likely AP is not in the range so remove the
@@ -2692,9 +2688,9 @@ static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata)
 		return -ETIMEDOUT;
 	}
 
-	pr_debug("%s: associate with %pM (try %d/%d)\n",
-		 sdata->name, assoc_data->bss->bssid, assoc_data->tries,
-		 IEEE80211_ASSOC_MAX_TRIES);
+	sdata_info(sdata, "associate with %pM (try %d/%d)\n",
+		   assoc_data->bss->bssid, assoc_data->tries,
+		   IEEE80211_ASSOC_MAX_TRIES);
 	ieee80211_send_assoc(sdata);
 
 	assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT;
@@ -2767,45 +2763,31 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
 			ieee80211_reset_ap_probe(sdata);
 		else if (ifmgd->nullfunc_failed) {
 			if (ifmgd->probe_send_count < max_tries) {
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
-				wiphy_debug(local->hw.wiphy,
-					    "%s: No ack for nullfunc frame to"
-					    " AP %pM, try %d/%i\n",
-					    sdata->name, bssid,
-					    ifmgd->probe_send_count, max_tries);
-#endif
+				mlme_dbg(sdata,
+					 "No ack for nullfunc frame to AP %pM, try %d/%i\n",
+					 bssid, ifmgd->probe_send_count,
+					 max_tries);
 				ieee80211_mgd_probe_ap_send(sdata);
 			} else {
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
-				wiphy_debug(local->hw.wiphy,
-					    "%s: No ack for nullfunc frame to"
-					    " AP %pM, disconnecting.\n",
-					    sdata->name, bssid);
-#endif
+				mlme_dbg(sdata,
+					 "No ack for nullfunc frame to AP %pM, disconnecting.\n",
+					 bssid);
 				ieee80211_sta_connection_lost(sdata, bssid,
 					WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY);
 			}
 		} else if (time_is_after_jiffies(ifmgd->probe_timeout))
 			run_again(ifmgd, ifmgd->probe_timeout);
 		else if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) {
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
-			wiphy_debug(local->hw.wiphy,
-				    "%s: Failed to send nullfunc to AP %pM"
-				    " after %dms, disconnecting.\n",
-				    sdata->name,
-				    bssid, probe_wait_ms);
-#endif
+			mlme_dbg(sdata,
+				 "Failed to send nullfunc to AP %pM after %dms, disconnecting\n",
+				 bssid, probe_wait_ms);
 			ieee80211_sta_connection_lost(sdata, bssid,
 				WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY);
 		} else if (ifmgd->probe_send_count < max_tries) {
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
-			wiphy_debug(local->hw.wiphy,
-				    "%s: No probe response from AP %pM"
-				    " after %dms, try %d/%i\n",
-				    sdata->name,
-				    bssid, probe_wait_ms,
-				    ifmgd->probe_send_count, max_tries);
-#endif
+			mlme_dbg(sdata,
+				 "No probe response from AP %pM after %dms, try %d/%i\n",
+				 bssid, probe_wait_ms,
+				 ifmgd->probe_send_count, max_tries);
 			ieee80211_mgd_probe_ap_send(sdata);
 		} else {
 			/*
@@ -2920,11 +2902,8 @@ void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
 		sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME;
 		mutex_lock(&ifmgd->mtx);
 		if (ifmgd->associated) {
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
-			wiphy_debug(sdata->local->hw.wiphy,
-				    "%s: driver requested disconnect after resume.\n",
-				    sdata->name);
-#endif
+			mlme_dbg(sdata,
+				 "driver requested disconnect after resume\n");
 			ieee80211_sta_connection_lost(sdata,
 				ifmgd->associated->bssid,
 				WLAN_REASON_UNSPECIFIED);
@@ -3065,10 +3044,11 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
 			 * since we look at probe response/beacon data here
 			 * it should be OK.
 			 */
-			pr_debug("%s: Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
-				 sdata->name, cbss->channel->center_freq,
-				 ht_cfreq, ht_oper->primary_chan,
-				 cbss->channel->band);
+			sdata_info(sdata,
+				   "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
+				   cbss->channel->center_freq,
+				   ht_cfreq, ht_oper->primary_chan,
+				   cbss->channel->band);
 			ht_oper = NULL;
 		}
 	}
@@ -3092,8 +3072,8 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
 	if (!ieee80211_set_channel_type(local, sdata, channel_type)) {
 		/* can only fail due to HT40+/- mismatch */
 		channel_type = NL80211_CHAN_HT20;
-		pr_debug("%s: disabling 40 MHz due to multi-vif mismatch\n",
-			 sdata->name);
+		sdata_info(sdata,
+			   "disabling 40 MHz due to multi-vif mismatch\n");
 		ifmgd->flags |= IEEE80211_STA_DISABLE_40MHZ;
 		WARN_ON(!ieee80211_set_channel_type(local, sdata,
 						    channel_type));
@@ -3122,8 +3102,8 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
 		 * we can connect -- with a warning.
 		 */
 		if (!basic_rates && min_rate_index >= 0) {
-			pr_debug("%s: No basic rates, using min rate instead\n",
-				 sdata->name);
+			sdata_info(sdata,
+				   "No basic rates, using min rate instead\n");
 			basic_rates = BIT(min_rate_index);
 		}
 
@@ -3149,8 +3129,9 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
 		err = sta_info_insert(sta);
 		sta = NULL;
 		if (err) {
-			pr_debug("%s: failed to insert STA entry for the AP (error %d)\n",
-				 sdata->name, err);
+			sdata_info(sdata,
+				   "failed to insert STA entry for the AP (error %d)\n",
+				   err);
 			return err;
 		}
 	} else
@@ -3228,7 +3209,7 @@ int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata,
 	if (ifmgd->associated)
 		ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
 
-	pr_debug("%s: authenticate with %pM\n", sdata->name, req->bss->bssid);
+	sdata_info(sdata, "authenticate with %pM\n", req->bss->bssid);
 
 	err = ieee80211_prep_connection(sdata, req->bss, false);
 	if (err)
@@ -3410,8 +3391,8 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
 		 * Wait up to one beacon interval ...
 		 * should this be more if we miss one?
 		 */
-		pr_debug("%s: waiting for beacon from %pM\n",
-			 sdata->name, ifmgd->bssid);
+		sdata_info(sdata, "waiting for beacon from %pM\n",
+			   ifmgd->bssid);
 		assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval);
 	} else {
 		assoc_data->have_beacon = true;
@@ -3430,8 +3411,8 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
 				corrupt_type = "beacon";
 		} else if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP)
 			corrupt_type = "probe response";
-		pr_debug("%s: associating with AP with corrupt %s\n",
-			 sdata->name, corrupt_type);
+		sdata_info(sdata, "associating with AP with corrupt %s\n",
+			   corrupt_type);
 	}
 
 	err = 0;
@@ -3460,8 +3441,9 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
 		return 0;
 	}
 
-	pr_debug("%s: deauthenticating from %pM by local choice (reason=%d)\n",
-		 sdata->name, req->bssid, req->reason_code);
+	sdata_info(sdata,
+		   "deauthenticating from %pM by local choice (reason=%d)\n",
+		   req->bssid, req->reason_code);
 
 	if (ifmgd->associated &&
 	    ether_addr_equal(ifmgd->associated->bssid, req->bssid))
@@ -3503,8 +3485,9 @@ int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata,
 		return -ENOLINK;
 	}
 
-	pr_debug("%s: disassociating from %pM by local choice (reason=%d)\n",
-		 sdata->name, req->bss->bssid, req->reason_code);
+	sdata_info(sdata,
+		   "disassociating from %pM by local choice (reason=%d)\n",
+		   req->bss->bssid, req->reason_code);
 
 	memcpy(bssid, req->bss->bssid, ETH_ALEN);
 	ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DISASSOC,
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 9f1bd69..ab51850 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -632,11 +632,8 @@ static void ieee80211_sta_reorder_release(struct ieee80211_sub_if_data *sdata,
 					HT_RX_REORDER_BUF_TIMEOUT))
 				goto set_release_timer;
 
-#ifdef CONFIG_MAC80211_HT_DEBUG
-			if (net_ratelimit())
-				wiphy_debug(sdata->local->hw.wiphy,
-					    "release an RX reorder frame due to timeout on earlier frames\n");
-#endif
+			ht_dbg_ratelimited(sdata,
+					   "release an RX reorder frame due to timeout on earlier frames\n");
 			ieee80211_release_reorder_frame(sdata, tid_agg_rx, j);
 
 			/*
@@ -1136,24 +1133,18 @@ static void ap_sta_ps_start(struct sta_info *sta)
 	set_sta_flag(sta, WLAN_STA_PS_STA);
 	if (!(local->hw.flags & IEEE80211_HW_AP_LINK_PS))
 		drv_sta_notify(local, sdata, STA_NOTIFY_SLEEP, &sta->sta);
-#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
-	pr_debug("%s: STA %pM aid %d enters power save mode\n",
-		 sdata->name, sta->sta.addr, sta->sta.aid);
-#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
+	ps_dbg(sdata, "STA %pM aid %d enters power save mode\n",
+	       sta->sta.addr, sta->sta.aid);
 }
 
 static void ap_sta_ps_end(struct sta_info *sta)
 {
-#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
-	pr_debug("%s: STA %pM aid %d exits power save mode\n",
-		 sta->sdata->name, sta->sta.addr, sta->sta.aid);
-#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
+	ps_dbg(sta->sdata, "STA %pM aid %d exits power save mode\n",
+	       sta->sta.addr, sta->sta.aid);
 
 	if (test_sta_flag(sta, WLAN_STA_PS_DRIVER)) {
-#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
-		pr_debug("%s: STA %pM aid %d driver-ps-blocked\n",
-			 sta->sdata->name, sta->sta.addr, sta->sta.aid);
-#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
+		ps_dbg(sta->sdata, "STA %pM aid %d driver-ps-blocked\n",
+		       sta->sta.addr, sta->sta.aid);
 		return;
 	}
 
@@ -1383,17 +1374,8 @@ ieee80211_reassemble_add(struct ieee80211_sub_if_data *sdata,
 	if (sdata->fragment_next >= IEEE80211_FRAGMENT_MAX)
 		sdata->fragment_next = 0;
 
-	if (!skb_queue_empty(&entry->skb_list)) {
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
-		struct ieee80211_hdr *hdr =
-			(struct ieee80211_hdr *) entry->skb_list.next->data;
-		pr_debug("%s: RX reassembly removed oldest fragment entry (idx=%d age=%lu seq=%d last_frag=%d addr1=%pM addr2=%pM\n",
-			 sdata->name, idx,
-			 jiffies - entry->first_frag_time, entry->seq,
-			 entry->last_frag, hdr->addr1, hdr->addr2);
-#endif
+	if (!skb_queue_empty(&entry->skb_list))
 		__skb_queue_purge(&entry->skb_list);
-	}
 
 	__skb_queue_tail(&entry->skb_list, *skb); /* no need for locking */
 	*skb = NULL;
@@ -1751,7 +1733,7 @@ ieee80211_deliver_skb(struct ieee80211_rx_data *rx)
 			 */
 			xmit_skb = skb_copy(skb, GFP_ATOMIC);
 			if (!xmit_skb)
-				net_dbg_ratelimited("%s: failed to clone multicast frame\n",
+				net_info_ratelimited("%s: failed to clone multicast frame\n",
 						    dev->name);
 		} else {
 			dsta = sta_info_get(sdata, skb->data);
@@ -1955,7 +1937,7 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx)
 
 	fwd_skb = skb_copy(skb, GFP_ATOMIC);
 	if (!fwd_skb) {
-		net_dbg_ratelimited("%s: failed to clone mesh frame\n",
+		net_info_ratelimited("%s: failed to clone mesh frame\n",
 				    sdata->name);
 		goto out;
 	}
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index 77dcf2f..06fa75c 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -169,9 +169,7 @@ void sta_info_free(struct ieee80211_local *local, struct sta_info *sta)
 	if (sta->rate_ctrl)
 		rate_control_free_sta(sta);
 
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
-	wiphy_debug(local->hw.wiphy, "Destroyed STA %pM\n", sta->sta.addr);
-#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
+	sta_dbg(sta->sdata, "Destroyed STA %pM\n", sta->sta.addr);
 
 	kfree(sta);
 }
@@ -278,9 +276,7 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
 	for (i = 0; i < NUM_RX_DATA_QUEUES; i++)
 		sta->last_seq_ctrl[i] = cpu_to_le16(USHRT_MAX);
 
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
-	wiphy_debug(local->hw.wiphy, "Allocated STA %pM\n", sta->sta.addr);
-#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
+	sta_dbg(sdata, "Allocated STA %pM\n", sta->sta.addr);
 
 #ifdef CONFIG_MAC80211_MESH
 	sta->plink_state = NL80211_PLINK_LISTEN;
@@ -333,8 +329,9 @@ static int sta_info_insert_drv_state(struct ieee80211_local *local,
 	}
 
 	if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
-		pr_debug("%s: failed to move IBSS STA %pM to state %d (%d) - keeping it anyway\n",
-			 sdata->name, sta->sta.addr, state + 1, err);
+		sdata_info(sdata,
+			   "failed to move IBSS STA %pM to state %d (%d) - keeping it anyway\n",
+			   sta->sta.addr, state + 1, err);
 		err = 0;
 	}
 
@@ -389,9 +386,7 @@ static int sta_info_insert_finish(struct sta_info *sta) __acquires(RCU)
 	sinfo.generation = local->sta_generation;
 	cfg80211_new_sta(sdata->dev, sta->sta.addr, &sinfo, GFP_KERNEL);
 
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
-	wiphy_debug(local->hw.wiphy, "Inserted STA %pM\n", sta->sta.addr);
-#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
+	sta_dbg(sdata, "Inserted STA %pM\n", sta->sta.addr);
 
 	/* move reference to rcu-protected */
 	rcu_read_lock();
@@ -617,9 +612,8 @@ static bool sta_info_cleanup_expire_buffered_ac(struct ieee80211_local *local,
 			break;
 
 		local->total_ps_buffered--;
-#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
-		pr_debug("Buffered frame expired (STA %pM)\n", sta->sta.addr);
-#endif
+		ps_dbg(sta->sdata, "Buffered frame expired (STA %pM)\n",
+		       sta->sta.addr);
 		dev_kfree_skb(skb);
 	}
 
@@ -745,9 +739,8 @@ int __must_check __sta_info_destroy(struct sta_info *sta)
 		mesh_accept_plinks_update(sdata);
 #endif
 
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
-	wiphy_debug(local->hw.wiphy, "Removed STA %pM\n", sta->sta.addr);
-#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
+	sta_dbg(sdata, "Removed STA %pM\n", sta->sta.addr);
+
 	cancel_work_sync(&sta->drv_unblock_wk);
 
 	cfg80211_del_sta(sdata->dev, sta->sta.addr, GFP_KERNEL);
@@ -887,8 +880,8 @@ void ieee80211_sta_expire(struct ieee80211_sub_if_data *sdata,
 			continue;
 
 		if (time_after(jiffies, sta->last_rx + exp_time)) {
-			ibss_vdbg("%s: expiring inactive STA %pM\n",
-				  sdata->name, sta->sta.addr);
+			ibss_dbg(sdata, "expiring inactive STA %pM\n",
+				 sta->sta.addr);
 			WARN_ON(__sta_info_destroy(sta));
 		}
 	}
@@ -986,10 +979,9 @@ void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta)
 
 	sta_info_recalc_tim(sta);
 
-#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
-	pr_debug("%s: STA %pM aid %d sending %d filtered/%d PS frames since STA not sleeping anymore\n",
-		 sdata->name, sta->sta.addr, sta->sta.aid, filtered, buffered);
-#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
+	ps_dbg(sdata,
+	       "STA %pM aid %d sending %d filtered/%d PS frames since STA not sleeping anymore\n",
+	       sta->sta.addr, sta->sta.aid, filtered, buffered);
 }
 
 static void ieee80211_send_null_response(struct ieee80211_sub_if_data *sdata,
@@ -1379,10 +1371,8 @@ int sta_info_move_state(struct sta_info *sta,
 		return -EINVAL;
 	}
 
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
-	pr_debug("%s: moving STA %pM to state %d\n",
-		 sta->sdata->name, sta->sta.addr, new_state);
-#endif
+	sta_dbg(sta->sdata, "moving STA %pM to state %d\n",
+		sta->sta.addr, new_state);
 
 	/*
 	 * notify the driver before the actual changes so it can
diff --git a/net/mac80211/status.c b/net/mac80211/status.c
index 51a6d1e..2ed2f27 100644
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -155,13 +155,10 @@ static void ieee80211_handle_filtered_frame(struct ieee80211_local *local,
 		return;
 	}
 
-#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
-	if (net_ratelimit())
-		wiphy_debug(local->hw.wiphy,
-			    "dropped TX filtered frame, queue_len=%d PS=%d @%lu\n",
-			    skb_queue_len(&sta->tx_filtered[ac]),
-			    !!test_sta_flag(sta, WLAN_STA_PS_STA), jiffies);
-#endif
+	ps_dbg_ratelimited(sta->sdata,
+			   "dropped TX filtered frame, queue_len=%d PS=%d @%lu\n",
+			   skb_queue_len(&sta->tx_filtered[ac]),
+			   !!test_sta_flag(sta, WLAN_STA_PS_STA), jiffies);
 	dev_kfree_skb(skb);
 }
 
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index af25c4e..37eda7e 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -297,9 +297,10 @@ ieee80211_tx_h_check_assoc(struct ieee80211_tx_data *tx)
 		if (unlikely(!assoc &&
 			     ieee80211_is_data(hdr->frame_control))) {
 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
-			pr_debug("%s: dropped data frame to not associated station %pM\n",
-				 tx->sdata->name, hdr->addr1);
-#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
+			sdata_info(tx->sdata,
+				   "dropped data frame to not associated station %pM\n",
+				   hdr->addr1);
+#endif
 			I802_DEBUG_INC(tx->local->tx_handlers_drop_not_assoc);
 			return TX_DROP;
 		}
@@ -366,10 +367,7 @@ static void purge_old_ps_buffers(struct ieee80211_local *local)
 	rcu_read_unlock();
 
 	local->total_ps_buffered = total;
-#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
-	wiphy_debug(local->hw.wiphy, "PS buffers full - purged %d frames\n",
-		    purged);
-#endif
+	ps_dbg_hw(&local->hw, "PS buffers full - purged %d frames\n", purged);
 }
 
 static ieee80211_tx_result
@@ -411,10 +409,8 @@ ieee80211_tx_h_multicast_ps_buf(struct ieee80211_tx_data *tx)
 		purge_old_ps_buffers(tx->local);
 
 	if (skb_queue_len(&tx->sdata->bss->ps_bc_buf) >= AP_MAX_BC_BUFFER) {
-#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
-		net_dbg_ratelimited("%s: BC TX buffer full - dropping the oldest frame\n",
-				    tx->sdata->name);
-#endif
+		ps_dbg(tx->sdata,
+		       "BC TX buffer full - dropping the oldest frame\n");
 		dev_kfree_skb(skb_dequeue(&tx->sdata->bss->ps_bc_buf));
 	} else
 		tx->local->total_ps_buffered++;
@@ -465,18 +461,15 @@ ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx)
 			return TX_CONTINUE;
 		}
 
-#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
-		pr_debug("STA %pM aid %d: PS buffer for AC %d\n",
-			 sta->sta.addr, sta->sta.aid, ac);
-#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
+		ps_dbg(sta->sdata, "STA %pM aid %d: PS buffer for AC %d\n",
+		       sta->sta.addr, sta->sta.aid, ac);
 		if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER)
 			purge_old_ps_buffers(tx->local);
 		if (skb_queue_len(&sta->ps_tx_buf[ac]) >= STA_MAX_TX_BUFFER) {
 			struct sk_buff *old = skb_dequeue(&sta->ps_tx_buf[ac]);
-#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
-			net_dbg_ratelimited("%s: STA %pM TX buffer for AC %d full - dropping oldest frame\n",
-					    tx->sdata->name, sta->sta.addr, ac);
-#endif
+			ps_dbg(tx->sdata,
+			       "STA %pM TX buffer for AC %d full - dropping oldest frame\n",
+			       sta->sta.addr, ac);
 			dev_kfree_skb(old);
 		} else
 			tx->local->total_ps_buffered++;
@@ -498,13 +491,11 @@ ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx)
 		sta_info_recalc_tim(sta);
 
 		return TX_QUEUED;
+	} else if (unlikely(test_sta_flag(sta, WLAN_STA_PS_STA))) {
+		ps_dbg(tx->sdata,
+		       "STA %pM in PS mode, but polling/in SP -> send frame\n",
+		       sta->sta.addr);
 	}
-#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
-	else if (unlikely(test_sta_flag(sta, WLAN_STA_PS_STA))) {
-		pr_debug("%s: STA %pM in PS mode, but polling/in SP -> send frame\n",
-			 tx->sdata->name, sta->sta.addr);
-	}
-#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
 
 	return TX_CONTINUE;
 }
@@ -1963,7 +1954,7 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
 		     (cpu_to_be16(ethertype) != sdata->control_port_protocol ||
 		      !ether_addr_equal(sdata->vif.addr, skb->data + ETH_ALEN)))) {
 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
-		net_dbg_ratelimited("%s: dropped frame to %pM (unauthorized port)\n",
+		net_info_ratelimited("%s: dropped frame to %pM (unauthorized port)\n",
 				    dev->name, hdr.addr1);
 #endif
 
-- 
cgit v1.1


From 011ad0e9f8533cd003fb760663713df2655a2114 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 22 Jun 2012 12:55:52 +0200
Subject: mac80211: rename driver-trace file

This file will contain more soon, so
rename it to just trace.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/Makefile       |    4 +-
 net/mac80211/driver-ops.h   |    2 +-
 net/mac80211/driver-trace.c |    9 -
 net/mac80211/driver-trace.h | 1641 -------------------------------------------
 net/mac80211/offchannel.c   |    1 -
 net/mac80211/trace.c        |    9 +
 net/mac80211/trace.h        | 1641 +++++++++++++++++++++++++++++++++++++++++++
 7 files changed, 1653 insertions(+), 1654 deletions(-)
 delete mode 100644 net/mac80211/driver-trace.c
 delete mode 100644 net/mac80211/driver-trace.h
 create mode 100644 net/mac80211/trace.c
 create mode 100644 net/mac80211/trace.h

diff --git a/net/mac80211/Makefile b/net/mac80211/Makefile
index 231ffa0..a7dd110 100644
--- a/net/mac80211/Makefile
+++ b/net/mac80211/Makefile
@@ -24,7 +24,7 @@ mac80211-y := \
 	wme.o \
 	event.o \
 	chan.o \
-	driver-trace.o mlme.o
+	trace.o mlme.o
 
 mac80211-$(CONFIG_MAC80211_LEDS) += led.o
 mac80211-$(CONFIG_MAC80211_DEBUGFS) += \
@@ -42,7 +42,7 @@ mac80211-$(CONFIG_MAC80211_MESH) += \
 
 mac80211-$(CONFIG_PM) += pm.o
 
-CFLAGS_driver-trace.o := -I$(src)
+CFLAGS_trace.o := -I$(src)
 
 # objects for PID algorithm
 rc80211_pid-y := rc80211_pid_algo.o
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index 9330269..44e8c12 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -3,7 +3,7 @@
 
 #include <net/mac80211.h>
 #include "ieee80211_i.h"
-#include "driver-trace.h"
+#include "trace.h"
 
 static inline void check_sdata_in_driver(struct ieee80211_sub_if_data *sdata)
 {
diff --git a/net/mac80211/driver-trace.c b/net/mac80211/driver-trace.c
deleted file mode 100644
index 8ed8711..0000000
--- a/net/mac80211/driver-trace.c
+++ /dev/null
@@ -1,9 +0,0 @@
-/* bug in tracepoint.h, it should include this */
-#include <linux/module.h>
-
-/* sparse isn't too happy with all macros... */
-#ifndef __CHECKER__
-#include "driver-ops.h"
-#define CREATE_TRACE_POINTS
-#include "driver-trace.h"
-#endif
diff --git a/net/mac80211/driver-trace.h b/net/mac80211/driver-trace.h
deleted file mode 100644
index a0f7d35..0000000
--- a/net/mac80211/driver-trace.h
+++ /dev/null
@@ -1,1641 +0,0 @@
-#if !defined(__MAC80211_DRIVER_TRACE) || defined(TRACE_HEADER_MULTI_READ)
-#define __MAC80211_DRIVER_TRACE
-
-#include <linux/tracepoint.h>
-#include <net/mac80211.h>
-#include "ieee80211_i.h"
-
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM mac80211
-
-#define MAXNAME		32
-#define LOCAL_ENTRY	__array(char, wiphy_name, 32)
-#define LOCAL_ASSIGN	strlcpy(__entry->wiphy_name, wiphy_name(local->hw.wiphy), MAXNAME)
-#define LOCAL_PR_FMT	"%s"
-#define LOCAL_PR_ARG	__entry->wiphy_name
-
-#define STA_ENTRY	__array(char, sta_addr, ETH_ALEN)
-#define STA_ASSIGN	(sta ? memcpy(__entry->sta_addr, sta->addr, ETH_ALEN) : memset(__entry->sta_addr, 0, ETH_ALEN))
-#define STA_PR_FMT	" sta:%pM"
-#define STA_PR_ARG	__entry->sta_addr
-
-#define VIF_ENTRY	__field(enum nl80211_iftype, vif_type) __field(void *, sdata)	\
-			__field(bool, p2p)						\
-			__string(vif_name, sdata->dev ? sdata->dev->name : "<nodev>")
-#define VIF_ASSIGN	__entry->vif_type = sdata->vif.type; __entry->sdata = sdata;	\
-			__entry->p2p = sdata->vif.p2p;					\
-			__assign_str(vif_name, sdata->dev ? sdata->dev->name : "<nodev>")
-#define VIF_PR_FMT	" vif:%s(%d%s)"
-#define VIF_PR_ARG	__get_str(vif_name), __entry->vif_type, __entry->p2p ? "/p2p" : ""
-
-/*
- * Tracing for driver callbacks.
- */
-
-DECLARE_EVENT_CLASS(local_only_evt,
-	TP_PROTO(struct ieee80211_local *local),
-	TP_ARGS(local),
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-	),
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-	),
-	TP_printk(LOCAL_PR_FMT, LOCAL_PR_ARG)
-);
-
-DECLARE_EVENT_CLASS(local_sdata_addr_evt,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sub_if_data *sdata),
-	TP_ARGS(local, sdata),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		VIF_ENTRY
-		__array(char, addr, 6)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		VIF_ASSIGN;
-		memcpy(__entry->addr, sdata->vif.addr, 6);
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT  VIF_PR_FMT " addr:%pM",
-		LOCAL_PR_ARG, VIF_PR_ARG, __entry->addr
-	)
-);
-
-DECLARE_EVENT_CLASS(local_u32_evt,
-	TP_PROTO(struct ieee80211_local *local, u32 value),
-	TP_ARGS(local, value),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		__field(u32, value)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		__entry->value = value;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT " value:%d",
-		LOCAL_PR_ARG, __entry->value
-	)
-);
-
-DECLARE_EVENT_CLASS(local_sdata_evt,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sub_if_data *sdata),
-	TP_ARGS(local, sdata),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		VIF_ENTRY
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		VIF_ASSIGN;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT VIF_PR_FMT,
-		LOCAL_PR_ARG, VIF_PR_ARG
-	)
-);
-
-DEFINE_EVENT(local_only_evt, drv_return_void,
-	TP_PROTO(struct ieee80211_local *local),
-	TP_ARGS(local)
-);
-
-TRACE_EVENT(drv_return_int,
-	TP_PROTO(struct ieee80211_local *local, int ret),
-	TP_ARGS(local, ret),
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		__field(int, ret)
-	),
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		__entry->ret = ret;
-	),
-	TP_printk(LOCAL_PR_FMT " - %d", LOCAL_PR_ARG, __entry->ret)
-);
-
-TRACE_EVENT(drv_return_bool,
-	TP_PROTO(struct ieee80211_local *local, bool ret),
-	TP_ARGS(local, ret),
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		__field(bool, ret)
-	),
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		__entry->ret = ret;
-	),
-	TP_printk(LOCAL_PR_FMT " - %s", LOCAL_PR_ARG, (__entry->ret) ?
-		  "true" : "false")
-);
-
-TRACE_EVENT(drv_return_u64,
-	TP_PROTO(struct ieee80211_local *local, u64 ret),
-	TP_ARGS(local, ret),
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		__field(u64, ret)
-	),
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		__entry->ret = ret;
-	),
-	TP_printk(LOCAL_PR_FMT " - %llu", LOCAL_PR_ARG, __entry->ret)
-);
-
-DEFINE_EVENT(local_only_evt, drv_start,
-	TP_PROTO(struct ieee80211_local *local),
-	TP_ARGS(local)
-);
-
-DEFINE_EVENT(local_u32_evt, drv_get_et_strings,
-	     TP_PROTO(struct ieee80211_local *local, u32 sset),
-	     TP_ARGS(local, sset)
-);
-
-DEFINE_EVENT(local_u32_evt, drv_get_et_sset_count,
-	     TP_PROTO(struct ieee80211_local *local, u32 sset),
-	     TP_ARGS(local, sset)
-);
-
-DEFINE_EVENT(local_only_evt, drv_get_et_stats,
-	     TP_PROTO(struct ieee80211_local *local),
-	     TP_ARGS(local)
-);
-
-DEFINE_EVENT(local_only_evt, drv_suspend,
-	TP_PROTO(struct ieee80211_local *local),
-	TP_ARGS(local)
-);
-
-DEFINE_EVENT(local_only_evt, drv_resume,
-	TP_PROTO(struct ieee80211_local *local),
-	TP_ARGS(local)
-);
-
-TRACE_EVENT(drv_set_wakeup,
-	TP_PROTO(struct ieee80211_local *local, bool enabled),
-	TP_ARGS(local, enabled),
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		__field(bool, enabled)
-	),
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		__entry->enabled = enabled;
-	),
-	TP_printk(LOCAL_PR_FMT " enabled:%d", LOCAL_PR_ARG, __entry->enabled)
-);
-
-DEFINE_EVENT(local_only_evt, drv_stop,
-	TP_PROTO(struct ieee80211_local *local),
-	TP_ARGS(local)
-);
-
-DEFINE_EVENT(local_sdata_addr_evt, drv_add_interface,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sub_if_data *sdata),
-	TP_ARGS(local, sdata)
-);
-
-TRACE_EVENT(drv_change_interface,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sub_if_data *sdata,
-		 enum nl80211_iftype type, bool p2p),
-
-	TP_ARGS(local, sdata, type, p2p),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		VIF_ENTRY
-		__field(u32, new_type)
-		__field(bool, new_p2p)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		VIF_ASSIGN;
-		__entry->new_type = type;
-		__entry->new_p2p = p2p;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT  VIF_PR_FMT " new type:%d%s",
-		LOCAL_PR_ARG, VIF_PR_ARG, __entry->new_type,
-		__entry->new_p2p ? "/p2p" : ""
-	)
-);
-
-DEFINE_EVENT(local_sdata_addr_evt, drv_remove_interface,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sub_if_data *sdata),
-	TP_ARGS(local, sdata)
-);
-
-TRACE_EVENT(drv_config,
-	TP_PROTO(struct ieee80211_local *local,
-		 u32 changed),
-
-	TP_ARGS(local, changed),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		__field(u32, changed)
-		__field(u32, flags)
-		__field(int, power_level)
-		__field(int, dynamic_ps_timeout)
-		__field(int, max_sleep_period)
-		__field(u16, listen_interval)
-		__field(u8, long_frame_max_tx_count)
-		__field(u8, short_frame_max_tx_count)
-		__field(int, center_freq)
-		__field(int, channel_type)
-		__field(int, smps)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		__entry->changed = changed;
-		__entry->flags = local->hw.conf.flags;
-		__entry->power_level = local->hw.conf.power_level;
-		__entry->dynamic_ps_timeout = local->hw.conf.dynamic_ps_timeout;
-		__entry->max_sleep_period = local->hw.conf.max_sleep_period;
-		__entry->listen_interval = local->hw.conf.listen_interval;
-		__entry->long_frame_max_tx_count = local->hw.conf.long_frame_max_tx_count;
-		__entry->short_frame_max_tx_count = local->hw.conf.short_frame_max_tx_count;
-		__entry->center_freq = local->hw.conf.channel->center_freq;
-		__entry->channel_type = local->hw.conf.channel_type;
-		__entry->smps = local->hw.conf.smps_mode;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT " ch:%#x freq:%d",
-		LOCAL_PR_ARG, __entry->changed, __entry->center_freq
-	)
-);
-
-TRACE_EVENT(drv_bss_info_changed,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sub_if_data *sdata,
-		 struct ieee80211_bss_conf *info,
-		 u32 changed),
-
-	TP_ARGS(local, sdata, info, changed),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		VIF_ENTRY
-		__field(bool, assoc)
-		__field(u16, aid)
-		__field(bool, cts)
-		__field(bool, shortpre)
-		__field(bool, shortslot)
-		__field(u8, dtimper)
-		__field(u16, bcnint)
-		__field(u16, assoc_cap)
-		__field(u64, timestamp)
-		__field(u32, basic_rates)
-		__field(u32, changed)
-		__field(bool, enable_beacon)
-		__field(u16, ht_operation_mode)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		VIF_ASSIGN;
-		__entry->changed = changed;
-		__entry->aid = info->aid;
-		__entry->assoc = info->assoc;
-		__entry->shortpre = info->use_short_preamble;
-		__entry->cts = info->use_cts_prot;
-		__entry->shortslot = info->use_short_slot;
-		__entry->dtimper = info->dtim_period;
-		__entry->bcnint = info->beacon_int;
-		__entry->assoc_cap = info->assoc_capability;
-		__entry->timestamp = info->last_tsf;
-		__entry->basic_rates = info->basic_rates;
-		__entry->enable_beacon = info->enable_beacon;
-		__entry->ht_operation_mode = info->ht_operation_mode;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT  VIF_PR_FMT " changed:%#x",
-		LOCAL_PR_ARG, VIF_PR_ARG, __entry->changed
-	)
-);
-
-TRACE_EVENT(drv_prepare_multicast,
-	TP_PROTO(struct ieee80211_local *local, int mc_count),
-
-	TP_ARGS(local, mc_count),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		__field(int, mc_count)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		__entry->mc_count = mc_count;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT " prepare mc (%d)",
-		LOCAL_PR_ARG, __entry->mc_count
-	)
-);
-
-TRACE_EVENT(drv_configure_filter,
-	TP_PROTO(struct ieee80211_local *local,
-		 unsigned int changed_flags,
-		 unsigned int *total_flags,
-		 u64 multicast),
-
-	TP_ARGS(local, changed_flags, total_flags, multicast),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		__field(unsigned int, changed)
-		__field(unsigned int, total)
-		__field(u64, multicast)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		__entry->changed = changed_flags;
-		__entry->total = *total_flags;
-		__entry->multicast = multicast;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT " changed:%#x total:%#x",
-		LOCAL_PR_ARG, __entry->changed, __entry->total
-	)
-);
-
-TRACE_EVENT(drv_set_tim,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sta *sta, bool set),
-
-	TP_ARGS(local, sta, set),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		STA_ENTRY
-		__field(bool, set)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		STA_ASSIGN;
-		__entry->set = set;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT STA_PR_FMT " set:%d",
-		LOCAL_PR_ARG, STA_PR_FMT, __entry->set
-	)
-);
-
-TRACE_EVENT(drv_set_key,
-	TP_PROTO(struct ieee80211_local *local,
-		 enum set_key_cmd cmd, struct ieee80211_sub_if_data *sdata,
-		 struct ieee80211_sta *sta,
-		 struct ieee80211_key_conf *key),
-
-	TP_ARGS(local, cmd, sdata, sta, key),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		VIF_ENTRY
-		STA_ENTRY
-		__field(u32, cipher)
-		__field(u8, hw_key_idx)
-		__field(u8, flags)
-		__field(s8, keyidx)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		VIF_ASSIGN;
-		STA_ASSIGN;
-		__entry->cipher = key->cipher;
-		__entry->flags = key->flags;
-		__entry->keyidx = key->keyidx;
-		__entry->hw_key_idx = key->hw_key_idx;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT  VIF_PR_FMT  STA_PR_FMT,
-		LOCAL_PR_ARG, VIF_PR_ARG, STA_PR_ARG
-	)
-);
-
-TRACE_EVENT(drv_update_tkip_key,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sub_if_data *sdata,
-		 struct ieee80211_key_conf *conf,
-		 struct ieee80211_sta *sta, u32 iv32),
-
-	TP_ARGS(local, sdata, conf, sta, iv32),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		VIF_ENTRY
-		STA_ENTRY
-		__field(u32, iv32)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		VIF_ASSIGN;
-		STA_ASSIGN;
-		__entry->iv32 = iv32;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT VIF_PR_FMT STA_PR_FMT " iv32:%#x",
-		LOCAL_PR_ARG,VIF_PR_ARG,STA_PR_ARG, __entry->iv32
-	)
-);
-
-DEFINE_EVENT(local_sdata_evt, drv_hw_scan,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sub_if_data *sdata),
-	TP_ARGS(local, sdata)
-);
-
-DEFINE_EVENT(local_sdata_evt, drv_cancel_hw_scan,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sub_if_data *sdata),
-	TP_ARGS(local, sdata)
-);
-
-DEFINE_EVENT(local_sdata_evt, drv_sched_scan_start,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sub_if_data *sdata),
-	TP_ARGS(local, sdata)
-);
-
-DEFINE_EVENT(local_sdata_evt, drv_sched_scan_stop,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sub_if_data *sdata),
-	TP_ARGS(local, sdata)
-);
-
-DEFINE_EVENT(local_only_evt, drv_sw_scan_start,
-	TP_PROTO(struct ieee80211_local *local),
-	TP_ARGS(local)
-);
-
-DEFINE_EVENT(local_only_evt, drv_sw_scan_complete,
-	TP_PROTO(struct ieee80211_local *local),
-	TP_ARGS(local)
-);
-
-TRACE_EVENT(drv_get_stats,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_low_level_stats *stats,
-		 int ret),
-
-	TP_ARGS(local, stats, ret),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		__field(int, ret)
-		__field(unsigned int, ackfail)
-		__field(unsigned int, rtsfail)
-		__field(unsigned int, fcserr)
-		__field(unsigned int, rtssucc)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		__entry->ret = ret;
-		__entry->ackfail = stats->dot11ACKFailureCount;
-		__entry->rtsfail = stats->dot11RTSFailureCount;
-		__entry->fcserr = stats->dot11FCSErrorCount;
-		__entry->rtssucc = stats->dot11RTSSuccessCount;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT " ret:%d",
-		LOCAL_PR_ARG, __entry->ret
-	)
-);
-
-TRACE_EVENT(drv_get_tkip_seq,
-	TP_PROTO(struct ieee80211_local *local,
-		 u8 hw_key_idx, u32 *iv32, u16 *iv16),
-
-	TP_ARGS(local, hw_key_idx, iv32, iv16),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		__field(u8, hw_key_idx)
-		__field(u32, iv32)
-		__field(u16, iv16)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		__entry->hw_key_idx = hw_key_idx;
-		__entry->iv32 = *iv32;
-		__entry->iv16 = *iv16;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT, LOCAL_PR_ARG
-	)
-);
-
-DEFINE_EVENT(local_u32_evt, drv_set_frag_threshold,
-	TP_PROTO(struct ieee80211_local *local, u32 value),
-	TP_ARGS(local, value)
-);
-
-DEFINE_EVENT(local_u32_evt, drv_set_rts_threshold,
-	TP_PROTO(struct ieee80211_local *local, u32 value),
-	TP_ARGS(local, value)
-);
-
-TRACE_EVENT(drv_set_coverage_class,
-	TP_PROTO(struct ieee80211_local *local, u8 value),
-
-	TP_ARGS(local, value),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		__field(u8, value)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		__entry->value = value;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT " value:%d",
-		LOCAL_PR_ARG, __entry->value
-	)
-);
-
-TRACE_EVENT(drv_sta_notify,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sub_if_data *sdata,
-		 enum sta_notify_cmd cmd,
-		 struct ieee80211_sta *sta),
-
-	TP_ARGS(local, sdata, cmd, sta),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		VIF_ENTRY
-		STA_ENTRY
-		__field(u32, cmd)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		VIF_ASSIGN;
-		STA_ASSIGN;
-		__entry->cmd = cmd;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT  VIF_PR_FMT  STA_PR_FMT " cmd:%d",
-		LOCAL_PR_ARG, VIF_PR_ARG, STA_PR_ARG, __entry->cmd
-	)
-);
-
-TRACE_EVENT(drv_sta_state,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sub_if_data *sdata,
-		 struct ieee80211_sta *sta,
-		 enum ieee80211_sta_state old_state,
-		 enum ieee80211_sta_state new_state),
-
-	TP_ARGS(local, sdata, sta, old_state, new_state),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		VIF_ENTRY
-		STA_ENTRY
-		__field(u32, old_state)
-		__field(u32, new_state)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		VIF_ASSIGN;
-		STA_ASSIGN;
-		__entry->old_state = old_state;
-		__entry->new_state = new_state;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT  VIF_PR_FMT  STA_PR_FMT " state: %d->%d",
-		LOCAL_PR_ARG, VIF_PR_ARG, STA_PR_ARG,
-		__entry->old_state, __entry->new_state
-	)
-);
-
-TRACE_EVENT(drv_sta_rc_update,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sub_if_data *sdata,
-		 struct ieee80211_sta *sta,
-		 u32 changed),
-
-	TP_ARGS(local, sdata, sta, changed),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		VIF_ENTRY
-		STA_ENTRY
-		__field(u32, changed)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		VIF_ASSIGN;
-		STA_ASSIGN;
-		__entry->changed = changed;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT  VIF_PR_FMT  STA_PR_FMT " changed: 0x%x",
-		LOCAL_PR_ARG, VIF_PR_ARG, STA_PR_ARG, __entry->changed
-	)
-);
-
-TRACE_EVENT(drv_sta_add,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sub_if_data *sdata,
-		 struct ieee80211_sta *sta),
-
-	TP_ARGS(local, sdata, sta),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		VIF_ENTRY
-		STA_ENTRY
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		VIF_ASSIGN;
-		STA_ASSIGN;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT  VIF_PR_FMT  STA_PR_FMT,
-		LOCAL_PR_ARG, VIF_PR_ARG, STA_PR_ARG
-	)
-);
-
-TRACE_EVENT(drv_sta_remove,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sub_if_data *sdata,
-		 struct ieee80211_sta *sta),
-
-	TP_ARGS(local, sdata, sta),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		VIF_ENTRY
-		STA_ENTRY
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		VIF_ASSIGN;
-		STA_ASSIGN;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT  VIF_PR_FMT  STA_PR_FMT,
-		LOCAL_PR_ARG, VIF_PR_ARG, STA_PR_ARG
-	)
-);
-
-TRACE_EVENT(drv_conf_tx,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sub_if_data *sdata,
-		 u16 ac, const struct ieee80211_tx_queue_params *params),
-
-	TP_ARGS(local, sdata, ac, params),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		VIF_ENTRY
-		__field(u16, ac)
-		__field(u16, txop)
-		__field(u16, cw_min)
-		__field(u16, cw_max)
-		__field(u8, aifs)
-		__field(bool, uapsd)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		VIF_ASSIGN;
-		__entry->ac = ac;
-		__entry->txop = params->txop;
-		__entry->cw_max = params->cw_max;
-		__entry->cw_min = params->cw_min;
-		__entry->aifs = params->aifs;
-		__entry->uapsd = params->uapsd;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT  VIF_PR_FMT  " AC:%d",
-		LOCAL_PR_ARG, VIF_PR_ARG, __entry->ac
-	)
-);
-
-DEFINE_EVENT(local_sdata_evt, drv_get_tsf,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sub_if_data *sdata),
-	TP_ARGS(local, sdata)
-);
-
-TRACE_EVENT(drv_set_tsf,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sub_if_data *sdata,
-		 u64 tsf),
-
-	TP_ARGS(local, sdata, tsf),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		VIF_ENTRY
-		__field(u64, tsf)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		VIF_ASSIGN;
-		__entry->tsf = tsf;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT  VIF_PR_FMT  " tsf:%llu",
-		LOCAL_PR_ARG, VIF_PR_ARG, (unsigned long long)__entry->tsf
-	)
-);
-
-DEFINE_EVENT(local_sdata_evt, drv_reset_tsf,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sub_if_data *sdata),
-	TP_ARGS(local, sdata)
-);
-
-DEFINE_EVENT(local_only_evt, drv_tx_last_beacon,
-	TP_PROTO(struct ieee80211_local *local),
-	TP_ARGS(local)
-);
-
-TRACE_EVENT(drv_ampdu_action,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sub_if_data *sdata,
-		 enum ieee80211_ampdu_mlme_action action,
-		 struct ieee80211_sta *sta, u16 tid,
-		 u16 *ssn, u8 buf_size),
-
-	TP_ARGS(local, sdata, action, sta, tid, ssn, buf_size),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		STA_ENTRY
-		__field(u32, action)
-		__field(u16, tid)
-		__field(u16, ssn)
-		__field(u8, buf_size)
-		VIF_ENTRY
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		VIF_ASSIGN;
-		STA_ASSIGN;
-		__entry->action = action;
-		__entry->tid = tid;
-		__entry->ssn = ssn ? *ssn : 0;
-		__entry->buf_size = buf_size;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT VIF_PR_FMT STA_PR_FMT " action:%d tid:%d buf:%d",
-		LOCAL_PR_ARG, VIF_PR_ARG, STA_PR_ARG, __entry->action,
-		__entry->tid, __entry->buf_size
-	)
-);
-
-TRACE_EVENT(drv_get_survey,
-	TP_PROTO(struct ieee80211_local *local, int idx,
-		 struct survey_info *survey),
-
-	TP_ARGS(local, idx, survey),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		__field(int, idx)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		__entry->idx = idx;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT " idx:%d",
-		LOCAL_PR_ARG, __entry->idx
-	)
-);
-
-TRACE_EVENT(drv_flush,
-	TP_PROTO(struct ieee80211_local *local, bool drop),
-
-	TP_ARGS(local, drop),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		__field(bool, drop)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		__entry->drop = drop;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT " drop:%d",
-		LOCAL_PR_ARG, __entry->drop
-	)
-);
-
-TRACE_EVENT(drv_channel_switch,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_channel_switch *ch_switch),
-
-	TP_ARGS(local, ch_switch),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		__field(u64, timestamp)
-		__field(bool, block_tx)
-		__field(u16, freq)
-		__field(u8, count)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		__entry->timestamp = ch_switch->timestamp;
-		__entry->block_tx = ch_switch->block_tx;
-		__entry->freq = ch_switch->channel->center_freq;
-		__entry->count = ch_switch->count;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT " new freq:%u count:%d",
-		LOCAL_PR_ARG, __entry->freq, __entry->count
-	)
-);
-
-TRACE_EVENT(drv_set_antenna,
-	TP_PROTO(struct ieee80211_local *local, u32 tx_ant, u32 rx_ant, int ret),
-
-	TP_ARGS(local, tx_ant, rx_ant, ret),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		__field(u32, tx_ant)
-		__field(u32, rx_ant)
-		__field(int, ret)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		__entry->tx_ant = tx_ant;
-		__entry->rx_ant = rx_ant;
-		__entry->ret = ret;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT " tx_ant:%d rx_ant:%d ret:%d",
-		LOCAL_PR_ARG, __entry->tx_ant, __entry->rx_ant, __entry->ret
-	)
-);
-
-TRACE_EVENT(drv_get_antenna,
-	TP_PROTO(struct ieee80211_local *local, u32 tx_ant, u32 rx_ant, int ret),
-
-	TP_ARGS(local, tx_ant, rx_ant, ret),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		__field(u32, tx_ant)
-		__field(u32, rx_ant)
-		__field(int, ret)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		__entry->tx_ant = tx_ant;
-		__entry->rx_ant = rx_ant;
-		__entry->ret = ret;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT " tx_ant:%d rx_ant:%d ret:%d",
-		LOCAL_PR_ARG, __entry->tx_ant, __entry->rx_ant, __entry->ret
-	)
-);
-
-TRACE_EVENT(drv_remain_on_channel,
-	TP_PROTO(struct ieee80211_local *local, struct ieee80211_channel *chan,
-		 enum nl80211_channel_type chantype, unsigned int duration),
-
-	TP_ARGS(local, chan, chantype, duration),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		__field(int, center_freq)
-		__field(int, channel_type)
-		__field(unsigned int, duration)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		__entry->center_freq = chan->center_freq;
-		__entry->channel_type = chantype;
-		__entry->duration = duration;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT " freq:%dMHz duration:%dms",
-		LOCAL_PR_ARG, __entry->center_freq, __entry->duration
-	)
-);
-
-DEFINE_EVENT(local_only_evt, drv_cancel_remain_on_channel,
-	TP_PROTO(struct ieee80211_local *local),
-	TP_ARGS(local)
-);
-
-TRACE_EVENT(drv_offchannel_tx,
-	TP_PROTO(struct ieee80211_local *local, struct sk_buff *skb,
-		 struct ieee80211_channel *chan,
-		 enum nl80211_channel_type channel_type,
-		 unsigned int wait),
-
-	TP_ARGS(local, skb, chan, channel_type, wait),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		__field(int, center_freq)
-		__field(int, channel_type)
-		__field(unsigned int, wait)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		__entry->center_freq = chan->center_freq;
-		__entry->channel_type = channel_type;
-		__entry->wait = wait;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT " freq:%dMHz, wait:%dms",
-		LOCAL_PR_ARG, __entry->center_freq, __entry->wait
-	)
-);
-
-TRACE_EVENT(drv_set_ringparam,
-	TP_PROTO(struct ieee80211_local *local, u32 tx, u32 rx),
-
-	TP_ARGS(local, tx, rx),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		__field(u32, tx)
-		__field(u32, rx)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		__entry->tx = tx;
-		__entry->rx = rx;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT " tx:%d rx %d",
-		LOCAL_PR_ARG, __entry->tx, __entry->rx
-	)
-);
-
-TRACE_EVENT(drv_get_ringparam,
-	TP_PROTO(struct ieee80211_local *local, u32 *tx, u32 *tx_max,
-		 u32 *rx, u32 *rx_max),
-
-	TP_ARGS(local, tx, tx_max, rx, rx_max),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		__field(u32, tx)
-		__field(u32, tx_max)
-		__field(u32, rx)
-		__field(u32, rx_max)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		__entry->tx = *tx;
-		__entry->tx_max = *tx_max;
-		__entry->rx = *rx;
-		__entry->rx_max = *rx_max;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT " tx:%d tx_max %d rx %d rx_max %d",
-		LOCAL_PR_ARG,
-		__entry->tx, __entry->tx_max, __entry->rx, __entry->rx_max
-	)
-);
-
-DEFINE_EVENT(local_only_evt, drv_tx_frames_pending,
-	TP_PROTO(struct ieee80211_local *local),
-	TP_ARGS(local)
-);
-
-DEFINE_EVENT(local_only_evt, drv_offchannel_tx_cancel_wait,
-	TP_PROTO(struct ieee80211_local *local),
-	TP_ARGS(local)
-);
-
-TRACE_EVENT(drv_set_bitrate_mask,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sub_if_data *sdata,
-		 const struct cfg80211_bitrate_mask *mask),
-
-	TP_ARGS(local, sdata, mask),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		VIF_ENTRY
-		__field(u32, legacy_2g)
-		__field(u32, legacy_5g)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		VIF_ASSIGN;
-		__entry->legacy_2g = mask->control[IEEE80211_BAND_2GHZ].legacy;
-		__entry->legacy_5g = mask->control[IEEE80211_BAND_5GHZ].legacy;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT  VIF_PR_FMT " 2G Mask:0x%x 5G Mask:0x%x",
-		LOCAL_PR_ARG, VIF_PR_ARG, __entry->legacy_2g, __entry->legacy_5g
-	)
-);
-
-TRACE_EVENT(drv_set_rekey_data,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sub_if_data *sdata,
-		 struct cfg80211_gtk_rekey_data *data),
-
-	TP_ARGS(local, sdata, data),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		VIF_ENTRY
-		__array(u8, kek, NL80211_KEK_LEN)
-		__array(u8, kck, NL80211_KCK_LEN)
-		__array(u8, replay_ctr, NL80211_REPLAY_CTR_LEN)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		VIF_ASSIGN;
-		memcpy(__entry->kek, data->kek, NL80211_KEK_LEN);
-		memcpy(__entry->kck, data->kck, NL80211_KCK_LEN);
-		memcpy(__entry->replay_ctr, data->replay_ctr,
-		       NL80211_REPLAY_CTR_LEN);
-	),
-
-	TP_printk(LOCAL_PR_FMT VIF_PR_FMT,
-		  LOCAL_PR_ARG, VIF_PR_ARG)
-);
-
-TRACE_EVENT(drv_rssi_callback,
-	TP_PROTO(struct ieee80211_local *local,
-		 enum ieee80211_rssi_event rssi_event),
-
-	TP_ARGS(local, rssi_event),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		__field(u32, rssi_event)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		__entry->rssi_event = rssi_event;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT " rssi_event:%d",
-		LOCAL_PR_ARG, __entry->rssi_event
-	)
-);
-
-DECLARE_EVENT_CLASS(release_evt,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sta *sta,
-		 u16 tids, int num_frames,
-		 enum ieee80211_frame_release_type reason,
-		 bool more_data),
-
-	TP_ARGS(local, sta, tids, num_frames, reason, more_data),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		STA_ENTRY
-		__field(u16, tids)
-		__field(int, num_frames)
-		__field(int, reason)
-		__field(bool, more_data)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		STA_ASSIGN;
-		__entry->tids = tids;
-		__entry->num_frames = num_frames;
-		__entry->reason = reason;
-		__entry->more_data = more_data;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT STA_PR_FMT
-		" TIDs:0x%.4x frames:%d reason:%d more:%d",
-		LOCAL_PR_ARG, STA_PR_ARG, __entry->tids, __entry->num_frames,
-		__entry->reason, __entry->more_data
-	)
-);
-
-DEFINE_EVENT(release_evt, drv_release_buffered_frames,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sta *sta,
-		 u16 tids, int num_frames,
-		 enum ieee80211_frame_release_type reason,
-		 bool more_data),
-
-	TP_ARGS(local, sta, tids, num_frames, reason, more_data)
-);
-
-DEFINE_EVENT(release_evt, drv_allow_buffered_frames,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sta *sta,
-		 u16 tids, int num_frames,
-		 enum ieee80211_frame_release_type reason,
-		 bool more_data),
-
-	TP_ARGS(local, sta, tids, num_frames, reason, more_data)
-);
-
-TRACE_EVENT(drv_get_rssi,
-	TP_PROTO(struct ieee80211_local *local, struct ieee80211_sta *sta,
-		 s8 rssi, int ret),
-
-	TP_ARGS(local, sta, rssi, ret),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		STA_ENTRY
-		__field(s8, rssi)
-		__field(int, ret)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		STA_ASSIGN;
-		__entry->rssi = rssi;
-		__entry->ret = ret;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT STA_PR_FMT " rssi:%d ret:%d",
-		LOCAL_PR_ARG, STA_PR_ARG, __entry->rssi, __entry->ret
-	)
-);
-
-/*
- * Tracing for API calls that drivers call.
- */
-
-TRACE_EVENT(api_start_tx_ba_session,
-	TP_PROTO(struct ieee80211_sta *sta, u16 tid),
-
-	TP_ARGS(sta, tid),
-
-	TP_STRUCT__entry(
-		STA_ENTRY
-		__field(u16, tid)
-	),
-
-	TP_fast_assign(
-		STA_ASSIGN;
-		__entry->tid = tid;
-	),
-
-	TP_printk(
-		STA_PR_FMT " tid:%d",
-		STA_PR_ARG, __entry->tid
-	)
-);
-
-TRACE_EVENT(api_start_tx_ba_cb,
-	TP_PROTO(struct ieee80211_sub_if_data *sdata, const u8 *ra, u16 tid),
-
-	TP_ARGS(sdata, ra, tid),
-
-	TP_STRUCT__entry(
-		VIF_ENTRY
-		__array(u8, ra, ETH_ALEN)
-		__field(u16, tid)
-	),
-
-	TP_fast_assign(
-		VIF_ASSIGN;
-		memcpy(__entry->ra, ra, ETH_ALEN);
-		__entry->tid = tid;
-	),
-
-	TP_printk(
-		VIF_PR_FMT " ra:%pM tid:%d",
-		VIF_PR_ARG, __entry->ra, __entry->tid
-	)
-);
-
-TRACE_EVENT(api_stop_tx_ba_session,
-	TP_PROTO(struct ieee80211_sta *sta, u16 tid),
-
-	TP_ARGS(sta, tid),
-
-	TP_STRUCT__entry(
-		STA_ENTRY
-		__field(u16, tid)
-	),
-
-	TP_fast_assign(
-		STA_ASSIGN;
-		__entry->tid = tid;
-	),
-
-	TP_printk(
-		STA_PR_FMT " tid:%d",
-		STA_PR_ARG, __entry->tid
-	)
-);
-
-TRACE_EVENT(api_stop_tx_ba_cb,
-	TP_PROTO(struct ieee80211_sub_if_data *sdata, const u8 *ra, u16 tid),
-
-	TP_ARGS(sdata, ra, tid),
-
-	TP_STRUCT__entry(
-		VIF_ENTRY
-		__array(u8, ra, ETH_ALEN)
-		__field(u16, tid)
-	),
-
-	TP_fast_assign(
-		VIF_ASSIGN;
-		memcpy(__entry->ra, ra, ETH_ALEN);
-		__entry->tid = tid;
-	),
-
-	TP_printk(
-		VIF_PR_FMT " ra:%pM tid:%d",
-		VIF_PR_ARG, __entry->ra, __entry->tid
-	)
-);
-
-DEFINE_EVENT(local_only_evt, api_restart_hw,
-	TP_PROTO(struct ieee80211_local *local),
-	TP_ARGS(local)
-);
-
-TRACE_EVENT(api_beacon_loss,
-	TP_PROTO(struct ieee80211_sub_if_data *sdata),
-
-	TP_ARGS(sdata),
-
-	TP_STRUCT__entry(
-		VIF_ENTRY
-	),
-
-	TP_fast_assign(
-		VIF_ASSIGN;
-	),
-
-	TP_printk(
-		VIF_PR_FMT,
-		VIF_PR_ARG
-	)
-);
-
-TRACE_EVENT(api_connection_loss,
-	TP_PROTO(struct ieee80211_sub_if_data *sdata),
-
-	TP_ARGS(sdata),
-
-	TP_STRUCT__entry(
-		VIF_ENTRY
-	),
-
-	TP_fast_assign(
-		VIF_ASSIGN;
-	),
-
-	TP_printk(
-		VIF_PR_FMT,
-		VIF_PR_ARG
-	)
-);
-
-TRACE_EVENT(api_cqm_rssi_notify,
-	TP_PROTO(struct ieee80211_sub_if_data *sdata,
-		 enum nl80211_cqm_rssi_threshold_event rssi_event),
-
-	TP_ARGS(sdata, rssi_event),
-
-	TP_STRUCT__entry(
-		VIF_ENTRY
-		__field(u32, rssi_event)
-	),
-
-	TP_fast_assign(
-		VIF_ASSIGN;
-		__entry->rssi_event = rssi_event;
-	),
-
-	TP_printk(
-		VIF_PR_FMT " event:%d",
-		VIF_PR_ARG, __entry->rssi_event
-	)
-);
-
-TRACE_EVENT(api_scan_completed,
-	TP_PROTO(struct ieee80211_local *local, bool aborted),
-
-	TP_ARGS(local, aborted),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		__field(bool, aborted)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		__entry->aborted = aborted;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT " aborted:%d",
-		LOCAL_PR_ARG, __entry->aborted
-	)
-);
-
-TRACE_EVENT(api_sched_scan_results,
-	TP_PROTO(struct ieee80211_local *local),
-
-	TP_ARGS(local),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT, LOCAL_PR_ARG
-	)
-);
-
-TRACE_EVENT(api_sched_scan_stopped,
-	TP_PROTO(struct ieee80211_local *local),
-
-	TP_ARGS(local),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT, LOCAL_PR_ARG
-	)
-);
-
-TRACE_EVENT(api_sta_block_awake,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sta *sta, bool block),
-
-	TP_ARGS(local, sta, block),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		STA_ENTRY
-		__field(bool, block)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		STA_ASSIGN;
-		__entry->block = block;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT STA_PR_FMT " block:%d",
-		LOCAL_PR_ARG, STA_PR_FMT, __entry->block
-	)
-);
-
-TRACE_EVENT(api_chswitch_done,
-	TP_PROTO(struct ieee80211_sub_if_data *sdata, bool success),
-
-	TP_ARGS(sdata, success),
-
-	TP_STRUCT__entry(
-		VIF_ENTRY
-		__field(bool, success)
-	),
-
-	TP_fast_assign(
-		VIF_ASSIGN;
-		__entry->success = success;
-	),
-
-	TP_printk(
-		VIF_PR_FMT " success=%d",
-		VIF_PR_ARG, __entry->success
-	)
-);
-
-DEFINE_EVENT(local_only_evt, api_ready_on_channel,
-	TP_PROTO(struct ieee80211_local *local),
-	TP_ARGS(local)
-);
-
-DEFINE_EVENT(local_only_evt, api_remain_on_channel_expired,
-	TP_PROTO(struct ieee80211_local *local),
-	TP_ARGS(local)
-);
-
-TRACE_EVENT(api_gtk_rekey_notify,
-	TP_PROTO(struct ieee80211_sub_if_data *sdata,
-		 const u8 *bssid, const u8 *replay_ctr),
-
-	TP_ARGS(sdata, bssid, replay_ctr),
-
-	TP_STRUCT__entry(
-		VIF_ENTRY
-		__array(u8, bssid, ETH_ALEN)
-		__array(u8, replay_ctr, NL80211_REPLAY_CTR_LEN)
-	),
-
-	TP_fast_assign(
-		VIF_ASSIGN;
-		memcpy(__entry->bssid, bssid, ETH_ALEN);
-		memcpy(__entry->replay_ctr, replay_ctr, NL80211_REPLAY_CTR_LEN);
-	),
-
-	TP_printk(VIF_PR_FMT, VIF_PR_ARG)
-);
-
-TRACE_EVENT(api_enable_rssi_reports,
-	TP_PROTO(struct ieee80211_sub_if_data *sdata,
-		 int rssi_min_thold, int rssi_max_thold),
-
-	TP_ARGS(sdata, rssi_min_thold, rssi_max_thold),
-
-	TP_STRUCT__entry(
-		VIF_ENTRY
-		__field(int, rssi_min_thold)
-		__field(int, rssi_max_thold)
-	),
-
-	TP_fast_assign(
-		VIF_ASSIGN;
-		__entry->rssi_min_thold = rssi_min_thold;
-		__entry->rssi_max_thold = rssi_max_thold;
-	),
-
-	TP_printk(
-		VIF_PR_FMT " rssi_min_thold =%d, rssi_max_thold = %d",
-		VIF_PR_ARG, __entry->rssi_min_thold, __entry->rssi_max_thold
-	)
-);
-
-TRACE_EVENT(api_eosp,
-	TP_PROTO(struct ieee80211_local *local,
-		 struct ieee80211_sta *sta),
-
-	TP_ARGS(local, sta),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		STA_ENTRY
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		STA_ASSIGN;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT STA_PR_FMT,
-		LOCAL_PR_ARG, STA_PR_FMT
-	)
-);
-
-/*
- * Tracing for internal functions
- * (which may also be called in response to driver calls)
- */
-
-TRACE_EVENT(wake_queue,
-	TP_PROTO(struct ieee80211_local *local, u16 queue,
-		 enum queue_stop_reason reason),
-
-	TP_ARGS(local, queue, reason),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		__field(u16, queue)
-		__field(u32, reason)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		__entry->queue = queue;
-		__entry->reason = reason;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT " queue:%d, reason:%d",
-		LOCAL_PR_ARG, __entry->queue, __entry->reason
-	)
-);
-
-TRACE_EVENT(stop_queue,
-	TP_PROTO(struct ieee80211_local *local, u16 queue,
-		 enum queue_stop_reason reason),
-
-	TP_ARGS(local, queue, reason),
-
-	TP_STRUCT__entry(
-		LOCAL_ENTRY
-		__field(u16, queue)
-		__field(u32, reason)
-	),
-
-	TP_fast_assign(
-		LOCAL_ASSIGN;
-		__entry->queue = queue;
-		__entry->reason = reason;
-	),
-
-	TP_printk(
-		LOCAL_PR_FMT " queue:%d, reason:%d",
-		LOCAL_PR_ARG, __entry->queue, __entry->reason
-	)
-);
-#endif /* !__MAC80211_DRIVER_TRACE || TRACE_HEADER_MULTI_READ */
-
-#undef TRACE_INCLUDE_PATH
-#define TRACE_INCLUDE_PATH .
-#undef TRACE_INCLUDE_FILE
-#define TRACE_INCLUDE_FILE driver-trace
-#include <trace/define_trace.h>
diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c
index 7f93626..b0fb6a2 100644
--- a/net/mac80211/offchannel.c
+++ b/net/mac80211/offchannel.c
@@ -15,7 +15,6 @@
 #include <linux/export.h>
 #include <net/mac80211.h>
 #include "ieee80211_i.h"
-#include "driver-trace.h"
 #include "driver-ops.h"
 
 /*
diff --git a/net/mac80211/trace.c b/net/mac80211/trace.c
new file mode 100644
index 0000000..943da6e
--- /dev/null
+++ b/net/mac80211/trace.c
@@ -0,0 +1,9 @@
+/* bug in tracepoint.h, it should include this */
+#include <linux/module.h>
+
+/* sparse isn't too happy with all macros... */
+#ifndef __CHECKER__
+#include "driver-ops.h"
+#define CREATE_TRACE_POINTS
+#include "trace.h"
+#endif
diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h
new file mode 100644
index 0000000..392bcc9
--- /dev/null
+++ b/net/mac80211/trace.h
@@ -0,0 +1,1641 @@
+#if !defined(__MAC80211_DRIVER_TRACE) || defined(TRACE_HEADER_MULTI_READ)
+#define __MAC80211_DRIVER_TRACE
+
+#include <linux/tracepoint.h>
+#include <net/mac80211.h>
+#include "ieee80211_i.h"
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM mac80211
+
+#define MAXNAME		32
+#define LOCAL_ENTRY	__array(char, wiphy_name, 32)
+#define LOCAL_ASSIGN	strlcpy(__entry->wiphy_name, wiphy_name(local->hw.wiphy), MAXNAME)
+#define LOCAL_PR_FMT	"%s"
+#define LOCAL_PR_ARG	__entry->wiphy_name
+
+#define STA_ENTRY	__array(char, sta_addr, ETH_ALEN)
+#define STA_ASSIGN	(sta ? memcpy(__entry->sta_addr, sta->addr, ETH_ALEN) : memset(__entry->sta_addr, 0, ETH_ALEN))
+#define STA_PR_FMT	" sta:%pM"
+#define STA_PR_ARG	__entry->sta_addr
+
+#define VIF_ENTRY	__field(enum nl80211_iftype, vif_type) __field(void *, sdata)	\
+			__field(bool, p2p)						\
+			__string(vif_name, sdata->dev ? sdata->dev->name : "<nodev>")
+#define VIF_ASSIGN	__entry->vif_type = sdata->vif.type; __entry->sdata = sdata;	\
+			__entry->p2p = sdata->vif.p2p;					\
+			__assign_str(vif_name, sdata->dev ? sdata->dev->name : "<nodev>")
+#define VIF_PR_FMT	" vif:%s(%d%s)"
+#define VIF_PR_ARG	__get_str(vif_name), __entry->vif_type, __entry->p2p ? "/p2p" : ""
+
+/*
+ * Tracing for driver callbacks.
+ */
+
+DECLARE_EVENT_CLASS(local_only_evt,
+	TP_PROTO(struct ieee80211_local *local),
+	TP_ARGS(local),
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+	),
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+	),
+	TP_printk(LOCAL_PR_FMT, LOCAL_PR_ARG)
+);
+
+DECLARE_EVENT_CLASS(local_sdata_addr_evt,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata),
+	TP_ARGS(local, sdata),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		VIF_ENTRY
+		__array(char, addr, 6)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		VIF_ASSIGN;
+		memcpy(__entry->addr, sdata->vif.addr, 6);
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT  VIF_PR_FMT " addr:%pM",
+		LOCAL_PR_ARG, VIF_PR_ARG, __entry->addr
+	)
+);
+
+DECLARE_EVENT_CLASS(local_u32_evt,
+	TP_PROTO(struct ieee80211_local *local, u32 value),
+	TP_ARGS(local, value),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(u32, value)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->value = value;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT " value:%d",
+		LOCAL_PR_ARG, __entry->value
+	)
+);
+
+DECLARE_EVENT_CLASS(local_sdata_evt,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata),
+	TP_ARGS(local, sdata),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		VIF_ENTRY
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		VIF_ASSIGN;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT VIF_PR_FMT,
+		LOCAL_PR_ARG, VIF_PR_ARG
+	)
+);
+
+DEFINE_EVENT(local_only_evt, drv_return_void,
+	TP_PROTO(struct ieee80211_local *local),
+	TP_ARGS(local)
+);
+
+TRACE_EVENT(drv_return_int,
+	TP_PROTO(struct ieee80211_local *local, int ret),
+	TP_ARGS(local, ret),
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(int, ret)
+	),
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->ret = ret;
+	),
+	TP_printk(LOCAL_PR_FMT " - %d", LOCAL_PR_ARG, __entry->ret)
+);
+
+TRACE_EVENT(drv_return_bool,
+	TP_PROTO(struct ieee80211_local *local, bool ret),
+	TP_ARGS(local, ret),
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(bool, ret)
+	),
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->ret = ret;
+	),
+	TP_printk(LOCAL_PR_FMT " - %s", LOCAL_PR_ARG, (__entry->ret) ?
+		  "true" : "false")
+);
+
+TRACE_EVENT(drv_return_u64,
+	TP_PROTO(struct ieee80211_local *local, u64 ret),
+	TP_ARGS(local, ret),
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(u64, ret)
+	),
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->ret = ret;
+	),
+	TP_printk(LOCAL_PR_FMT " - %llu", LOCAL_PR_ARG, __entry->ret)
+);
+
+DEFINE_EVENT(local_only_evt, drv_start,
+	TP_PROTO(struct ieee80211_local *local),
+	TP_ARGS(local)
+);
+
+DEFINE_EVENT(local_u32_evt, drv_get_et_strings,
+	     TP_PROTO(struct ieee80211_local *local, u32 sset),
+	     TP_ARGS(local, sset)
+);
+
+DEFINE_EVENT(local_u32_evt, drv_get_et_sset_count,
+	     TP_PROTO(struct ieee80211_local *local, u32 sset),
+	     TP_ARGS(local, sset)
+);
+
+DEFINE_EVENT(local_only_evt, drv_get_et_stats,
+	     TP_PROTO(struct ieee80211_local *local),
+	     TP_ARGS(local)
+);
+
+DEFINE_EVENT(local_only_evt, drv_suspend,
+	TP_PROTO(struct ieee80211_local *local),
+	TP_ARGS(local)
+);
+
+DEFINE_EVENT(local_only_evt, drv_resume,
+	TP_PROTO(struct ieee80211_local *local),
+	TP_ARGS(local)
+);
+
+TRACE_EVENT(drv_set_wakeup,
+	TP_PROTO(struct ieee80211_local *local, bool enabled),
+	TP_ARGS(local, enabled),
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(bool, enabled)
+	),
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->enabled = enabled;
+	),
+	TP_printk(LOCAL_PR_FMT " enabled:%d", LOCAL_PR_ARG, __entry->enabled)
+);
+
+DEFINE_EVENT(local_only_evt, drv_stop,
+	TP_PROTO(struct ieee80211_local *local),
+	TP_ARGS(local)
+);
+
+DEFINE_EVENT(local_sdata_addr_evt, drv_add_interface,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata),
+	TP_ARGS(local, sdata)
+);
+
+TRACE_EVENT(drv_change_interface,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata,
+		 enum nl80211_iftype type, bool p2p),
+
+	TP_ARGS(local, sdata, type, p2p),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		VIF_ENTRY
+		__field(u32, new_type)
+		__field(bool, new_p2p)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		VIF_ASSIGN;
+		__entry->new_type = type;
+		__entry->new_p2p = p2p;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT  VIF_PR_FMT " new type:%d%s",
+		LOCAL_PR_ARG, VIF_PR_ARG, __entry->new_type,
+		__entry->new_p2p ? "/p2p" : ""
+	)
+);
+
+DEFINE_EVENT(local_sdata_addr_evt, drv_remove_interface,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata),
+	TP_ARGS(local, sdata)
+);
+
+TRACE_EVENT(drv_config,
+	TP_PROTO(struct ieee80211_local *local,
+		 u32 changed),
+
+	TP_ARGS(local, changed),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(u32, changed)
+		__field(u32, flags)
+		__field(int, power_level)
+		__field(int, dynamic_ps_timeout)
+		__field(int, max_sleep_period)
+		__field(u16, listen_interval)
+		__field(u8, long_frame_max_tx_count)
+		__field(u8, short_frame_max_tx_count)
+		__field(int, center_freq)
+		__field(int, channel_type)
+		__field(int, smps)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->changed = changed;
+		__entry->flags = local->hw.conf.flags;
+		__entry->power_level = local->hw.conf.power_level;
+		__entry->dynamic_ps_timeout = local->hw.conf.dynamic_ps_timeout;
+		__entry->max_sleep_period = local->hw.conf.max_sleep_period;
+		__entry->listen_interval = local->hw.conf.listen_interval;
+		__entry->long_frame_max_tx_count = local->hw.conf.long_frame_max_tx_count;
+		__entry->short_frame_max_tx_count = local->hw.conf.short_frame_max_tx_count;
+		__entry->center_freq = local->hw.conf.channel->center_freq;
+		__entry->channel_type = local->hw.conf.channel_type;
+		__entry->smps = local->hw.conf.smps_mode;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT " ch:%#x freq:%d",
+		LOCAL_PR_ARG, __entry->changed, __entry->center_freq
+	)
+);
+
+TRACE_EVENT(drv_bss_info_changed,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata,
+		 struct ieee80211_bss_conf *info,
+		 u32 changed),
+
+	TP_ARGS(local, sdata, info, changed),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		VIF_ENTRY
+		__field(bool, assoc)
+		__field(u16, aid)
+		__field(bool, cts)
+		__field(bool, shortpre)
+		__field(bool, shortslot)
+		__field(u8, dtimper)
+		__field(u16, bcnint)
+		__field(u16, assoc_cap)
+		__field(u64, timestamp)
+		__field(u32, basic_rates)
+		__field(u32, changed)
+		__field(bool, enable_beacon)
+		__field(u16, ht_operation_mode)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		VIF_ASSIGN;
+		__entry->changed = changed;
+		__entry->aid = info->aid;
+		__entry->assoc = info->assoc;
+		__entry->shortpre = info->use_short_preamble;
+		__entry->cts = info->use_cts_prot;
+		__entry->shortslot = info->use_short_slot;
+		__entry->dtimper = info->dtim_period;
+		__entry->bcnint = info->beacon_int;
+		__entry->assoc_cap = info->assoc_capability;
+		__entry->timestamp = info->last_tsf;
+		__entry->basic_rates = info->basic_rates;
+		__entry->enable_beacon = info->enable_beacon;
+		__entry->ht_operation_mode = info->ht_operation_mode;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT  VIF_PR_FMT " changed:%#x",
+		LOCAL_PR_ARG, VIF_PR_ARG, __entry->changed
+	)
+);
+
+TRACE_EVENT(drv_prepare_multicast,
+	TP_PROTO(struct ieee80211_local *local, int mc_count),
+
+	TP_ARGS(local, mc_count),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(int, mc_count)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->mc_count = mc_count;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT " prepare mc (%d)",
+		LOCAL_PR_ARG, __entry->mc_count
+	)
+);
+
+TRACE_EVENT(drv_configure_filter,
+	TP_PROTO(struct ieee80211_local *local,
+		 unsigned int changed_flags,
+		 unsigned int *total_flags,
+		 u64 multicast),
+
+	TP_ARGS(local, changed_flags, total_flags, multicast),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(unsigned int, changed)
+		__field(unsigned int, total)
+		__field(u64, multicast)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->changed = changed_flags;
+		__entry->total = *total_flags;
+		__entry->multicast = multicast;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT " changed:%#x total:%#x",
+		LOCAL_PR_ARG, __entry->changed, __entry->total
+	)
+);
+
+TRACE_EVENT(drv_set_tim,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sta *sta, bool set),
+
+	TP_ARGS(local, sta, set),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		STA_ENTRY
+		__field(bool, set)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		STA_ASSIGN;
+		__entry->set = set;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT STA_PR_FMT " set:%d",
+		LOCAL_PR_ARG, STA_PR_FMT, __entry->set
+	)
+);
+
+TRACE_EVENT(drv_set_key,
+	TP_PROTO(struct ieee80211_local *local,
+		 enum set_key_cmd cmd, struct ieee80211_sub_if_data *sdata,
+		 struct ieee80211_sta *sta,
+		 struct ieee80211_key_conf *key),
+
+	TP_ARGS(local, cmd, sdata, sta, key),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		VIF_ENTRY
+		STA_ENTRY
+		__field(u32, cipher)
+		__field(u8, hw_key_idx)
+		__field(u8, flags)
+		__field(s8, keyidx)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		VIF_ASSIGN;
+		STA_ASSIGN;
+		__entry->cipher = key->cipher;
+		__entry->flags = key->flags;
+		__entry->keyidx = key->keyidx;
+		__entry->hw_key_idx = key->hw_key_idx;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT  VIF_PR_FMT  STA_PR_FMT,
+		LOCAL_PR_ARG, VIF_PR_ARG, STA_PR_ARG
+	)
+);
+
+TRACE_EVENT(drv_update_tkip_key,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata,
+		 struct ieee80211_key_conf *conf,
+		 struct ieee80211_sta *sta, u32 iv32),
+
+	TP_ARGS(local, sdata, conf, sta, iv32),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		VIF_ENTRY
+		STA_ENTRY
+		__field(u32, iv32)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		VIF_ASSIGN;
+		STA_ASSIGN;
+		__entry->iv32 = iv32;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT VIF_PR_FMT STA_PR_FMT " iv32:%#x",
+		LOCAL_PR_ARG,VIF_PR_ARG,STA_PR_ARG, __entry->iv32
+	)
+);
+
+DEFINE_EVENT(local_sdata_evt, drv_hw_scan,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata),
+	TP_ARGS(local, sdata)
+);
+
+DEFINE_EVENT(local_sdata_evt, drv_cancel_hw_scan,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata),
+	TP_ARGS(local, sdata)
+);
+
+DEFINE_EVENT(local_sdata_evt, drv_sched_scan_start,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata),
+	TP_ARGS(local, sdata)
+);
+
+DEFINE_EVENT(local_sdata_evt, drv_sched_scan_stop,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata),
+	TP_ARGS(local, sdata)
+);
+
+DEFINE_EVENT(local_only_evt, drv_sw_scan_start,
+	TP_PROTO(struct ieee80211_local *local),
+	TP_ARGS(local)
+);
+
+DEFINE_EVENT(local_only_evt, drv_sw_scan_complete,
+	TP_PROTO(struct ieee80211_local *local),
+	TP_ARGS(local)
+);
+
+TRACE_EVENT(drv_get_stats,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_low_level_stats *stats,
+		 int ret),
+
+	TP_ARGS(local, stats, ret),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(int, ret)
+		__field(unsigned int, ackfail)
+		__field(unsigned int, rtsfail)
+		__field(unsigned int, fcserr)
+		__field(unsigned int, rtssucc)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->ret = ret;
+		__entry->ackfail = stats->dot11ACKFailureCount;
+		__entry->rtsfail = stats->dot11RTSFailureCount;
+		__entry->fcserr = stats->dot11FCSErrorCount;
+		__entry->rtssucc = stats->dot11RTSSuccessCount;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT " ret:%d",
+		LOCAL_PR_ARG, __entry->ret
+	)
+);
+
+TRACE_EVENT(drv_get_tkip_seq,
+	TP_PROTO(struct ieee80211_local *local,
+		 u8 hw_key_idx, u32 *iv32, u16 *iv16),
+
+	TP_ARGS(local, hw_key_idx, iv32, iv16),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(u8, hw_key_idx)
+		__field(u32, iv32)
+		__field(u16, iv16)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->hw_key_idx = hw_key_idx;
+		__entry->iv32 = *iv32;
+		__entry->iv16 = *iv16;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT, LOCAL_PR_ARG
+	)
+);
+
+DEFINE_EVENT(local_u32_evt, drv_set_frag_threshold,
+	TP_PROTO(struct ieee80211_local *local, u32 value),
+	TP_ARGS(local, value)
+);
+
+DEFINE_EVENT(local_u32_evt, drv_set_rts_threshold,
+	TP_PROTO(struct ieee80211_local *local, u32 value),
+	TP_ARGS(local, value)
+);
+
+TRACE_EVENT(drv_set_coverage_class,
+	TP_PROTO(struct ieee80211_local *local, u8 value),
+
+	TP_ARGS(local, value),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(u8, value)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->value = value;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT " value:%d",
+		LOCAL_PR_ARG, __entry->value
+	)
+);
+
+TRACE_EVENT(drv_sta_notify,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata,
+		 enum sta_notify_cmd cmd,
+		 struct ieee80211_sta *sta),
+
+	TP_ARGS(local, sdata, cmd, sta),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		VIF_ENTRY
+		STA_ENTRY
+		__field(u32, cmd)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		VIF_ASSIGN;
+		STA_ASSIGN;
+		__entry->cmd = cmd;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT  VIF_PR_FMT  STA_PR_FMT " cmd:%d",
+		LOCAL_PR_ARG, VIF_PR_ARG, STA_PR_ARG, __entry->cmd
+	)
+);
+
+TRACE_EVENT(drv_sta_state,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata,
+		 struct ieee80211_sta *sta,
+		 enum ieee80211_sta_state old_state,
+		 enum ieee80211_sta_state new_state),
+
+	TP_ARGS(local, sdata, sta, old_state, new_state),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		VIF_ENTRY
+		STA_ENTRY
+		__field(u32, old_state)
+		__field(u32, new_state)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		VIF_ASSIGN;
+		STA_ASSIGN;
+		__entry->old_state = old_state;
+		__entry->new_state = new_state;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT  VIF_PR_FMT  STA_PR_FMT " state: %d->%d",
+		LOCAL_PR_ARG, VIF_PR_ARG, STA_PR_ARG,
+		__entry->old_state, __entry->new_state
+	)
+);
+
+TRACE_EVENT(drv_sta_rc_update,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata,
+		 struct ieee80211_sta *sta,
+		 u32 changed),
+
+	TP_ARGS(local, sdata, sta, changed),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		VIF_ENTRY
+		STA_ENTRY
+		__field(u32, changed)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		VIF_ASSIGN;
+		STA_ASSIGN;
+		__entry->changed = changed;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT  VIF_PR_FMT  STA_PR_FMT " changed: 0x%x",
+		LOCAL_PR_ARG, VIF_PR_ARG, STA_PR_ARG, __entry->changed
+	)
+);
+
+TRACE_EVENT(drv_sta_add,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata,
+		 struct ieee80211_sta *sta),
+
+	TP_ARGS(local, sdata, sta),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		VIF_ENTRY
+		STA_ENTRY
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		VIF_ASSIGN;
+		STA_ASSIGN;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT  VIF_PR_FMT  STA_PR_FMT,
+		LOCAL_PR_ARG, VIF_PR_ARG, STA_PR_ARG
+	)
+);
+
+TRACE_EVENT(drv_sta_remove,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata,
+		 struct ieee80211_sta *sta),
+
+	TP_ARGS(local, sdata, sta),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		VIF_ENTRY
+		STA_ENTRY
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		VIF_ASSIGN;
+		STA_ASSIGN;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT  VIF_PR_FMT  STA_PR_FMT,
+		LOCAL_PR_ARG, VIF_PR_ARG, STA_PR_ARG
+	)
+);
+
+TRACE_EVENT(drv_conf_tx,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata,
+		 u16 ac, const struct ieee80211_tx_queue_params *params),
+
+	TP_ARGS(local, sdata, ac, params),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		VIF_ENTRY
+		__field(u16, ac)
+		__field(u16, txop)
+		__field(u16, cw_min)
+		__field(u16, cw_max)
+		__field(u8, aifs)
+		__field(bool, uapsd)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		VIF_ASSIGN;
+		__entry->ac = ac;
+		__entry->txop = params->txop;
+		__entry->cw_max = params->cw_max;
+		__entry->cw_min = params->cw_min;
+		__entry->aifs = params->aifs;
+		__entry->uapsd = params->uapsd;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT  VIF_PR_FMT  " AC:%d",
+		LOCAL_PR_ARG, VIF_PR_ARG, __entry->ac
+	)
+);
+
+DEFINE_EVENT(local_sdata_evt, drv_get_tsf,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata),
+	TP_ARGS(local, sdata)
+);
+
+TRACE_EVENT(drv_set_tsf,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata,
+		 u64 tsf),
+
+	TP_ARGS(local, sdata, tsf),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		VIF_ENTRY
+		__field(u64, tsf)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		VIF_ASSIGN;
+		__entry->tsf = tsf;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT  VIF_PR_FMT  " tsf:%llu",
+		LOCAL_PR_ARG, VIF_PR_ARG, (unsigned long long)__entry->tsf
+	)
+);
+
+DEFINE_EVENT(local_sdata_evt, drv_reset_tsf,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata),
+	TP_ARGS(local, sdata)
+);
+
+DEFINE_EVENT(local_only_evt, drv_tx_last_beacon,
+	TP_PROTO(struct ieee80211_local *local),
+	TP_ARGS(local)
+);
+
+TRACE_EVENT(drv_ampdu_action,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata,
+		 enum ieee80211_ampdu_mlme_action action,
+		 struct ieee80211_sta *sta, u16 tid,
+		 u16 *ssn, u8 buf_size),
+
+	TP_ARGS(local, sdata, action, sta, tid, ssn, buf_size),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		STA_ENTRY
+		__field(u32, action)
+		__field(u16, tid)
+		__field(u16, ssn)
+		__field(u8, buf_size)
+		VIF_ENTRY
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		VIF_ASSIGN;
+		STA_ASSIGN;
+		__entry->action = action;
+		__entry->tid = tid;
+		__entry->ssn = ssn ? *ssn : 0;
+		__entry->buf_size = buf_size;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT VIF_PR_FMT STA_PR_FMT " action:%d tid:%d buf:%d",
+		LOCAL_PR_ARG, VIF_PR_ARG, STA_PR_ARG, __entry->action,
+		__entry->tid, __entry->buf_size
+	)
+);
+
+TRACE_EVENT(drv_get_survey,
+	TP_PROTO(struct ieee80211_local *local, int idx,
+		 struct survey_info *survey),
+
+	TP_ARGS(local, idx, survey),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(int, idx)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->idx = idx;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT " idx:%d",
+		LOCAL_PR_ARG, __entry->idx
+	)
+);
+
+TRACE_EVENT(drv_flush,
+	TP_PROTO(struct ieee80211_local *local, bool drop),
+
+	TP_ARGS(local, drop),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(bool, drop)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->drop = drop;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT " drop:%d",
+		LOCAL_PR_ARG, __entry->drop
+	)
+);
+
+TRACE_EVENT(drv_channel_switch,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_channel_switch *ch_switch),
+
+	TP_ARGS(local, ch_switch),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(u64, timestamp)
+		__field(bool, block_tx)
+		__field(u16, freq)
+		__field(u8, count)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->timestamp = ch_switch->timestamp;
+		__entry->block_tx = ch_switch->block_tx;
+		__entry->freq = ch_switch->channel->center_freq;
+		__entry->count = ch_switch->count;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT " new freq:%u count:%d",
+		LOCAL_PR_ARG, __entry->freq, __entry->count
+	)
+);
+
+TRACE_EVENT(drv_set_antenna,
+	TP_PROTO(struct ieee80211_local *local, u32 tx_ant, u32 rx_ant, int ret),
+
+	TP_ARGS(local, tx_ant, rx_ant, ret),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(u32, tx_ant)
+		__field(u32, rx_ant)
+		__field(int, ret)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->tx_ant = tx_ant;
+		__entry->rx_ant = rx_ant;
+		__entry->ret = ret;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT " tx_ant:%d rx_ant:%d ret:%d",
+		LOCAL_PR_ARG, __entry->tx_ant, __entry->rx_ant, __entry->ret
+	)
+);
+
+TRACE_EVENT(drv_get_antenna,
+	TP_PROTO(struct ieee80211_local *local, u32 tx_ant, u32 rx_ant, int ret),
+
+	TP_ARGS(local, tx_ant, rx_ant, ret),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(u32, tx_ant)
+		__field(u32, rx_ant)
+		__field(int, ret)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->tx_ant = tx_ant;
+		__entry->rx_ant = rx_ant;
+		__entry->ret = ret;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT " tx_ant:%d rx_ant:%d ret:%d",
+		LOCAL_PR_ARG, __entry->tx_ant, __entry->rx_ant, __entry->ret
+	)
+);
+
+TRACE_EVENT(drv_remain_on_channel,
+	TP_PROTO(struct ieee80211_local *local, struct ieee80211_channel *chan,
+		 enum nl80211_channel_type chantype, unsigned int duration),
+
+	TP_ARGS(local, chan, chantype, duration),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(int, center_freq)
+		__field(int, channel_type)
+		__field(unsigned int, duration)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->center_freq = chan->center_freq;
+		__entry->channel_type = chantype;
+		__entry->duration = duration;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT " freq:%dMHz duration:%dms",
+		LOCAL_PR_ARG, __entry->center_freq, __entry->duration
+	)
+);
+
+DEFINE_EVENT(local_only_evt, drv_cancel_remain_on_channel,
+	TP_PROTO(struct ieee80211_local *local),
+	TP_ARGS(local)
+);
+
+TRACE_EVENT(drv_offchannel_tx,
+	TP_PROTO(struct ieee80211_local *local, struct sk_buff *skb,
+		 struct ieee80211_channel *chan,
+		 enum nl80211_channel_type channel_type,
+		 unsigned int wait),
+
+	TP_ARGS(local, skb, chan, channel_type, wait),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(int, center_freq)
+		__field(int, channel_type)
+		__field(unsigned int, wait)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->center_freq = chan->center_freq;
+		__entry->channel_type = channel_type;
+		__entry->wait = wait;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT " freq:%dMHz, wait:%dms",
+		LOCAL_PR_ARG, __entry->center_freq, __entry->wait
+	)
+);
+
+TRACE_EVENT(drv_set_ringparam,
+	TP_PROTO(struct ieee80211_local *local, u32 tx, u32 rx),
+
+	TP_ARGS(local, tx, rx),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(u32, tx)
+		__field(u32, rx)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->tx = tx;
+		__entry->rx = rx;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT " tx:%d rx %d",
+		LOCAL_PR_ARG, __entry->tx, __entry->rx
+	)
+);
+
+TRACE_EVENT(drv_get_ringparam,
+	TP_PROTO(struct ieee80211_local *local, u32 *tx, u32 *tx_max,
+		 u32 *rx, u32 *rx_max),
+
+	TP_ARGS(local, tx, tx_max, rx, rx_max),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(u32, tx)
+		__field(u32, tx_max)
+		__field(u32, rx)
+		__field(u32, rx_max)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->tx = *tx;
+		__entry->tx_max = *tx_max;
+		__entry->rx = *rx;
+		__entry->rx_max = *rx_max;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT " tx:%d tx_max %d rx %d rx_max %d",
+		LOCAL_PR_ARG,
+		__entry->tx, __entry->tx_max, __entry->rx, __entry->rx_max
+	)
+);
+
+DEFINE_EVENT(local_only_evt, drv_tx_frames_pending,
+	TP_PROTO(struct ieee80211_local *local),
+	TP_ARGS(local)
+);
+
+DEFINE_EVENT(local_only_evt, drv_offchannel_tx_cancel_wait,
+	TP_PROTO(struct ieee80211_local *local),
+	TP_ARGS(local)
+);
+
+TRACE_EVENT(drv_set_bitrate_mask,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata,
+		 const struct cfg80211_bitrate_mask *mask),
+
+	TP_ARGS(local, sdata, mask),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		VIF_ENTRY
+		__field(u32, legacy_2g)
+		__field(u32, legacy_5g)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		VIF_ASSIGN;
+		__entry->legacy_2g = mask->control[IEEE80211_BAND_2GHZ].legacy;
+		__entry->legacy_5g = mask->control[IEEE80211_BAND_5GHZ].legacy;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT  VIF_PR_FMT " 2G Mask:0x%x 5G Mask:0x%x",
+		LOCAL_PR_ARG, VIF_PR_ARG, __entry->legacy_2g, __entry->legacy_5g
+	)
+);
+
+TRACE_EVENT(drv_set_rekey_data,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata,
+		 struct cfg80211_gtk_rekey_data *data),
+
+	TP_ARGS(local, sdata, data),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		VIF_ENTRY
+		__array(u8, kek, NL80211_KEK_LEN)
+		__array(u8, kck, NL80211_KCK_LEN)
+		__array(u8, replay_ctr, NL80211_REPLAY_CTR_LEN)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		VIF_ASSIGN;
+		memcpy(__entry->kek, data->kek, NL80211_KEK_LEN);
+		memcpy(__entry->kck, data->kck, NL80211_KCK_LEN);
+		memcpy(__entry->replay_ctr, data->replay_ctr,
+		       NL80211_REPLAY_CTR_LEN);
+	),
+
+	TP_printk(LOCAL_PR_FMT VIF_PR_FMT,
+		  LOCAL_PR_ARG, VIF_PR_ARG)
+);
+
+TRACE_EVENT(drv_rssi_callback,
+	TP_PROTO(struct ieee80211_local *local,
+		 enum ieee80211_rssi_event rssi_event),
+
+	TP_ARGS(local, rssi_event),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(u32, rssi_event)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->rssi_event = rssi_event;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT " rssi_event:%d",
+		LOCAL_PR_ARG, __entry->rssi_event
+	)
+);
+
+DECLARE_EVENT_CLASS(release_evt,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sta *sta,
+		 u16 tids, int num_frames,
+		 enum ieee80211_frame_release_type reason,
+		 bool more_data),
+
+	TP_ARGS(local, sta, tids, num_frames, reason, more_data),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		STA_ENTRY
+		__field(u16, tids)
+		__field(int, num_frames)
+		__field(int, reason)
+		__field(bool, more_data)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		STA_ASSIGN;
+		__entry->tids = tids;
+		__entry->num_frames = num_frames;
+		__entry->reason = reason;
+		__entry->more_data = more_data;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT STA_PR_FMT
+		" TIDs:0x%.4x frames:%d reason:%d more:%d",
+		LOCAL_PR_ARG, STA_PR_ARG, __entry->tids, __entry->num_frames,
+		__entry->reason, __entry->more_data
+	)
+);
+
+DEFINE_EVENT(release_evt, drv_release_buffered_frames,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sta *sta,
+		 u16 tids, int num_frames,
+		 enum ieee80211_frame_release_type reason,
+		 bool more_data),
+
+	TP_ARGS(local, sta, tids, num_frames, reason, more_data)
+);
+
+DEFINE_EVENT(release_evt, drv_allow_buffered_frames,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sta *sta,
+		 u16 tids, int num_frames,
+		 enum ieee80211_frame_release_type reason,
+		 bool more_data),
+
+	TP_ARGS(local, sta, tids, num_frames, reason, more_data)
+);
+
+TRACE_EVENT(drv_get_rssi,
+	TP_PROTO(struct ieee80211_local *local, struct ieee80211_sta *sta,
+		 s8 rssi, int ret),
+
+	TP_ARGS(local, sta, rssi, ret),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		STA_ENTRY
+		__field(s8, rssi)
+		__field(int, ret)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		STA_ASSIGN;
+		__entry->rssi = rssi;
+		__entry->ret = ret;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT STA_PR_FMT " rssi:%d ret:%d",
+		LOCAL_PR_ARG, STA_PR_ARG, __entry->rssi, __entry->ret
+	)
+);
+
+/*
+ * Tracing for API calls that drivers call.
+ */
+
+TRACE_EVENT(api_start_tx_ba_session,
+	TP_PROTO(struct ieee80211_sta *sta, u16 tid),
+
+	TP_ARGS(sta, tid),
+
+	TP_STRUCT__entry(
+		STA_ENTRY
+		__field(u16, tid)
+	),
+
+	TP_fast_assign(
+		STA_ASSIGN;
+		__entry->tid = tid;
+	),
+
+	TP_printk(
+		STA_PR_FMT " tid:%d",
+		STA_PR_ARG, __entry->tid
+	)
+);
+
+TRACE_EVENT(api_start_tx_ba_cb,
+	TP_PROTO(struct ieee80211_sub_if_data *sdata, const u8 *ra, u16 tid),
+
+	TP_ARGS(sdata, ra, tid),
+
+	TP_STRUCT__entry(
+		VIF_ENTRY
+		__array(u8, ra, ETH_ALEN)
+		__field(u16, tid)
+	),
+
+	TP_fast_assign(
+		VIF_ASSIGN;
+		memcpy(__entry->ra, ra, ETH_ALEN);
+		__entry->tid = tid;
+	),
+
+	TP_printk(
+		VIF_PR_FMT " ra:%pM tid:%d",
+		VIF_PR_ARG, __entry->ra, __entry->tid
+	)
+);
+
+TRACE_EVENT(api_stop_tx_ba_session,
+	TP_PROTO(struct ieee80211_sta *sta, u16 tid),
+
+	TP_ARGS(sta, tid),
+
+	TP_STRUCT__entry(
+		STA_ENTRY
+		__field(u16, tid)
+	),
+
+	TP_fast_assign(
+		STA_ASSIGN;
+		__entry->tid = tid;
+	),
+
+	TP_printk(
+		STA_PR_FMT " tid:%d",
+		STA_PR_ARG, __entry->tid
+	)
+);
+
+TRACE_EVENT(api_stop_tx_ba_cb,
+	TP_PROTO(struct ieee80211_sub_if_data *sdata, const u8 *ra, u16 tid),
+
+	TP_ARGS(sdata, ra, tid),
+
+	TP_STRUCT__entry(
+		VIF_ENTRY
+		__array(u8, ra, ETH_ALEN)
+		__field(u16, tid)
+	),
+
+	TP_fast_assign(
+		VIF_ASSIGN;
+		memcpy(__entry->ra, ra, ETH_ALEN);
+		__entry->tid = tid;
+	),
+
+	TP_printk(
+		VIF_PR_FMT " ra:%pM tid:%d",
+		VIF_PR_ARG, __entry->ra, __entry->tid
+	)
+);
+
+DEFINE_EVENT(local_only_evt, api_restart_hw,
+	TP_PROTO(struct ieee80211_local *local),
+	TP_ARGS(local)
+);
+
+TRACE_EVENT(api_beacon_loss,
+	TP_PROTO(struct ieee80211_sub_if_data *sdata),
+
+	TP_ARGS(sdata),
+
+	TP_STRUCT__entry(
+		VIF_ENTRY
+	),
+
+	TP_fast_assign(
+		VIF_ASSIGN;
+	),
+
+	TP_printk(
+		VIF_PR_FMT,
+		VIF_PR_ARG
+	)
+);
+
+TRACE_EVENT(api_connection_loss,
+	TP_PROTO(struct ieee80211_sub_if_data *sdata),
+
+	TP_ARGS(sdata),
+
+	TP_STRUCT__entry(
+		VIF_ENTRY
+	),
+
+	TP_fast_assign(
+		VIF_ASSIGN;
+	),
+
+	TP_printk(
+		VIF_PR_FMT,
+		VIF_PR_ARG
+	)
+);
+
+TRACE_EVENT(api_cqm_rssi_notify,
+	TP_PROTO(struct ieee80211_sub_if_data *sdata,
+		 enum nl80211_cqm_rssi_threshold_event rssi_event),
+
+	TP_ARGS(sdata, rssi_event),
+
+	TP_STRUCT__entry(
+		VIF_ENTRY
+		__field(u32, rssi_event)
+	),
+
+	TP_fast_assign(
+		VIF_ASSIGN;
+		__entry->rssi_event = rssi_event;
+	),
+
+	TP_printk(
+		VIF_PR_FMT " event:%d",
+		VIF_PR_ARG, __entry->rssi_event
+	)
+);
+
+TRACE_EVENT(api_scan_completed,
+	TP_PROTO(struct ieee80211_local *local, bool aborted),
+
+	TP_ARGS(local, aborted),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(bool, aborted)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->aborted = aborted;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT " aborted:%d",
+		LOCAL_PR_ARG, __entry->aborted
+	)
+);
+
+TRACE_EVENT(api_sched_scan_results,
+	TP_PROTO(struct ieee80211_local *local),
+
+	TP_ARGS(local),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT, LOCAL_PR_ARG
+	)
+);
+
+TRACE_EVENT(api_sched_scan_stopped,
+	TP_PROTO(struct ieee80211_local *local),
+
+	TP_ARGS(local),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT, LOCAL_PR_ARG
+	)
+);
+
+TRACE_EVENT(api_sta_block_awake,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sta *sta, bool block),
+
+	TP_ARGS(local, sta, block),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		STA_ENTRY
+		__field(bool, block)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		STA_ASSIGN;
+		__entry->block = block;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT STA_PR_FMT " block:%d",
+		LOCAL_PR_ARG, STA_PR_FMT, __entry->block
+	)
+);
+
+TRACE_EVENT(api_chswitch_done,
+	TP_PROTO(struct ieee80211_sub_if_data *sdata, bool success),
+
+	TP_ARGS(sdata, success),
+
+	TP_STRUCT__entry(
+		VIF_ENTRY
+		__field(bool, success)
+	),
+
+	TP_fast_assign(
+		VIF_ASSIGN;
+		__entry->success = success;
+	),
+
+	TP_printk(
+		VIF_PR_FMT " success=%d",
+		VIF_PR_ARG, __entry->success
+	)
+);
+
+DEFINE_EVENT(local_only_evt, api_ready_on_channel,
+	TP_PROTO(struct ieee80211_local *local),
+	TP_ARGS(local)
+);
+
+DEFINE_EVENT(local_only_evt, api_remain_on_channel_expired,
+	TP_PROTO(struct ieee80211_local *local),
+	TP_ARGS(local)
+);
+
+TRACE_EVENT(api_gtk_rekey_notify,
+	TP_PROTO(struct ieee80211_sub_if_data *sdata,
+		 const u8 *bssid, const u8 *replay_ctr),
+
+	TP_ARGS(sdata, bssid, replay_ctr),
+
+	TP_STRUCT__entry(
+		VIF_ENTRY
+		__array(u8, bssid, ETH_ALEN)
+		__array(u8, replay_ctr, NL80211_REPLAY_CTR_LEN)
+	),
+
+	TP_fast_assign(
+		VIF_ASSIGN;
+		memcpy(__entry->bssid, bssid, ETH_ALEN);
+		memcpy(__entry->replay_ctr, replay_ctr, NL80211_REPLAY_CTR_LEN);
+	),
+
+	TP_printk(VIF_PR_FMT, VIF_PR_ARG)
+);
+
+TRACE_EVENT(api_enable_rssi_reports,
+	TP_PROTO(struct ieee80211_sub_if_data *sdata,
+		 int rssi_min_thold, int rssi_max_thold),
+
+	TP_ARGS(sdata, rssi_min_thold, rssi_max_thold),
+
+	TP_STRUCT__entry(
+		VIF_ENTRY
+		__field(int, rssi_min_thold)
+		__field(int, rssi_max_thold)
+	),
+
+	TP_fast_assign(
+		VIF_ASSIGN;
+		__entry->rssi_min_thold = rssi_min_thold;
+		__entry->rssi_max_thold = rssi_max_thold;
+	),
+
+	TP_printk(
+		VIF_PR_FMT " rssi_min_thold =%d, rssi_max_thold = %d",
+		VIF_PR_ARG, __entry->rssi_min_thold, __entry->rssi_max_thold
+	)
+);
+
+TRACE_EVENT(api_eosp,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sta *sta),
+
+	TP_ARGS(local, sta),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		STA_ENTRY
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		STA_ASSIGN;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT STA_PR_FMT,
+		LOCAL_PR_ARG, STA_PR_FMT
+	)
+);
+
+/*
+ * Tracing for internal functions
+ * (which may also be called in response to driver calls)
+ */
+
+TRACE_EVENT(wake_queue,
+	TP_PROTO(struct ieee80211_local *local, u16 queue,
+		 enum queue_stop_reason reason),
+
+	TP_ARGS(local, queue, reason),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(u16, queue)
+		__field(u32, reason)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->queue = queue;
+		__entry->reason = reason;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT " queue:%d, reason:%d",
+		LOCAL_PR_ARG, __entry->queue, __entry->reason
+	)
+);
+
+TRACE_EVENT(stop_queue,
+	TP_PROTO(struct ieee80211_local *local, u16 queue,
+		 enum queue_stop_reason reason),
+
+	TP_ARGS(local, queue, reason),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(u16, queue)
+		__field(u32, reason)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->queue = queue;
+		__entry->reason = reason;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT " queue:%d, reason:%d",
+		LOCAL_PR_ARG, __entry->queue, __entry->reason
+	)
+);
+#endif /* !__MAC80211_DRIVER_TRACE || TRACE_HEADER_MULTI_READ */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE trace
+#include <trace/define_trace.h>
-- 
cgit v1.1


From 3fae0273168026ed7b6065674f1410f531d58164 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 22 Jun 2012 13:36:25 +0200
Subject: mac80211: trace debug messages

It can be very useful to have all debug messages
available when debugging, but hard to correlate
between different sources, so add a trace event
for all mac80211 debug messages.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/Kconfig | 13 +++++++++++
 net/mac80211/debug.h | 18 ++++++++++++++
 net/mac80211/trace.c | 66 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 net/mac80211/trace.h | 39 +++++++++++++++++++++++++++++++
 4 files changed, 136 insertions(+)

diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig
index 7475e26..63af254 100644
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
@@ -107,6 +107,19 @@ config MAC80211_DEBUGFS
 
 	  Say N unless you know you need this.
 
+config MAC80211_MESSAGE_TRACING
+	bool "Trace all mac80211 debug messages"
+	depends on MAC80211
+	---help---
+	  Select this option to have mac80211 register the
+	  mac80211_msg trace subsystem with tracepoints to
+	  collect all debugging messages, independent of
+	  printing them into the kernel log.
+
+	  The overhead in this option is that all the messages
+	  need to be present in the binary and formatted at
+	  runtime for tracing.
+
 menuconfig MAC80211_DEBUG_MENU
 	bool "Select mac80211 debugging features"
 	depends on MAC80211
diff --git a/net/mac80211/debug.h b/net/mac80211/debug.h
index 6e6bbb9..8f383a5 100644
--- a/net/mac80211/debug.h
+++ b/net/mac80211/debug.h
@@ -1,5 +1,6 @@
 #ifndef __MAC80211_DEBUG_H
 #define __MAC80211_DEBUG_H
+#include <net/cfg80211.h>
 
 #ifdef CONFIG_MAC80211_IBSS_DEBUG
 #define MAC80211_IBSS_DEBUG 1
@@ -61,6 +62,22 @@
 #define MAC80211_MLME_DEBUG 0
 #endif
 
+#ifdef CONFIG_MAC80211_MESSAGE_TRACING
+void __sdata_info(const char *fmt, ...) __printf(1, 2);
+void __sdata_dbg(bool print, const char *fmt, ...) __printf(2, 3);
+void __sdata_err(const char *fmt, ...) __printf(1, 2);
+void __wiphy_dbg(struct wiphy *wiphy, bool print, const char *fmt, ...)
+	__printf(3, 4);
+
+#define _sdata_info(sdata, fmt, ...)					\
+	__sdata_info("%s: " fmt, (sdata)->name, ##__VA_ARGS__)
+#define _sdata_dbg(print, sdata, fmt, ...)				\
+	__sdata_dbg(print, "%s: " fmt, (sdata)->name, ##__VA_ARGS__)
+#define _sdata_err(sdata, fmt, ...)					\
+	__sdata_err("%s: " fmt, (sdata)->name, ##__VA_ARGS__)
+#define _wiphy_dbg(print, wiphy, fmt, ...)				\
+	__wiphy_dbg(wiphy, print, fmt, ##__VA_ARGS__)
+#else
 #define _sdata_info(sdata, fmt, ...)					\
 do {									\
 	pr_info("%s: " fmt,						\
@@ -85,6 +102,7 @@ do {									\
 	if (print)							\
 		wiphy_dbg((wiphy), fmt, ##__VA_ARGS__);			\
 } while (0)
+#endif
 
 #define sdata_info(sdata, fmt, ...)					\
 	_sdata_info(sdata, fmt, ##__VA_ARGS__)
diff --git a/net/mac80211/trace.c b/net/mac80211/trace.c
index 943da6e..386e45d8 100644
--- a/net/mac80211/trace.c
+++ b/net/mac80211/trace.c
@@ -3,7 +3,73 @@
 
 /* sparse isn't too happy with all macros... */
 #ifndef __CHECKER__
+#include <net/cfg80211.h>
 #include "driver-ops.h"
+#include "debug.h"
 #define CREATE_TRACE_POINTS
 #include "trace.h"
+
+#ifdef CONFIG_MAC80211_MESSAGE_TRACING
+void __sdata_info(const char *fmt, ...)
+{
+	struct va_format vaf = {
+		.fmt = fmt,
+	};
+	va_list args;
+
+	va_start(args, fmt);
+	vaf.va = &args;
+
+	pr_info("%pV", &vaf);
+	trace_mac80211_info(&vaf);
+	va_end(args);
+}
+
+void __sdata_dbg(bool print, const char *fmt, ...)
+{
+	struct va_format vaf = {
+		.fmt = fmt,
+	};
+	va_list args;
+
+	va_start(args, fmt);
+	vaf.va = &args;
+
+	if (print)
+		pr_debug("%pV", &vaf);
+	trace_mac80211_dbg(&vaf);
+	va_end(args);
+}
+
+void __sdata_err(const char *fmt, ...)
+{
+	struct va_format vaf = {
+		.fmt = fmt,
+	};
+	va_list args;
+
+	va_start(args, fmt);
+	vaf.va = &args;
+
+	pr_err("%pV", &vaf);
+	trace_mac80211_err(&vaf);
+	va_end(args);
+}
+
+void __wiphy_dbg(struct wiphy *wiphy, bool print, const char *fmt, ...)
+{
+	struct va_format vaf = {
+		.fmt = fmt,
+	};
+	va_list args;
+
+	va_start(args, fmt);
+	vaf.va = &args;
+
+	if (print)
+		wiphy_dbg(wiphy, "%pV", &vaf);
+	trace_mac80211_dbg(&vaf);
+	va_end(args);
+}
+#endif
 #endif
diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h
index 392bcc9..2e60f4a 100644
--- a/net/mac80211/trace.h
+++ b/net/mac80211/trace.h
@@ -1632,6 +1632,45 @@ TRACE_EVENT(stop_queue,
 		LOCAL_PR_ARG, __entry->queue, __entry->reason
 	)
 );
+
+#ifdef CONFIG_MAC80211_MESSAGE_TRACING
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM mac80211_msg
+
+#define MAX_MSG_LEN	100
+
+DECLARE_EVENT_CLASS(mac80211_msg_event,
+	TP_PROTO(struct va_format *vaf),
+
+	TP_ARGS(vaf),
+
+	TP_STRUCT__entry(
+		__dynamic_array(char, msg, MAX_MSG_LEN)
+	),
+
+	TP_fast_assign(
+		WARN_ON_ONCE(vsnprintf(__get_dynamic_array(msg),
+				       MAX_MSG_LEN, vaf->fmt,
+				       *vaf->va) >= MAX_MSG_LEN);
+	),
+
+	TP_printk("%s", __get_str(msg))
+);
+
+DEFINE_EVENT(mac80211_msg_event, mac80211_info,
+	TP_PROTO(struct va_format *vaf),
+	TP_ARGS(vaf)
+);
+DEFINE_EVENT(mac80211_msg_event, mac80211_dbg,
+	TP_PROTO(struct va_format *vaf),
+	TP_ARGS(vaf)
+);
+DEFINE_EVENT(mac80211_msg_event, mac80211_err,
+	TP_PROTO(struct va_format *vaf),
+	TP_ARGS(vaf)
+);
+#endif
+
 #endif /* !__MAC80211_DRIVER_TRACE || TRACE_HEADER_MULTI_READ */
 
 #undef TRACE_INCLUDE_PATH
-- 
cgit v1.1


From d0f718c1c0dfcb67f3af47a1fc4de7784974d1f7 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Mon, 25 Jun 2012 14:46:44 +0200
Subject: mac80211_hwsim: fix smatch/sparse complaints

The code is fine in both cases as-is, but we can
write it slightly differently to fix smatch/sparse
complaints:
 * compare the skb pointer (which we use as a cookie)
   by casting the skb to unsigned long rather than the
   cookie to a pointer (fixes "different address spaces")
 * when transmitting, data->channel must be assigned,
   don't check it (fixes "dereferenced before check")

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 drivers/net/wireless/mac80211_hwsim.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 4c9336c..eacfe02 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -678,8 +678,7 @@ static bool mac80211_hwsim_tx_frame_no_nl(struct ieee80211_hw *hw,
 			continue;
 
 		if (data2->idle || !data2->started ||
-		    !hwsim_ps_rx_ok(data2, skb) ||
-		    !data->channel || !data2->channel ||
+		    !hwsim_ps_rx_ok(data2, skb) || !data2->channel ||
 		    data->channel->center_freq != data2->channel->center_freq ||
 		    !(data->group & data2->group))
 			continue;
@@ -1486,7 +1485,7 @@ static int hwsim_tx_info_frame_received_nl(struct sk_buff *skb_2,
 	struct mac80211_hwsim_data *data2;
 	struct ieee80211_tx_info *txi;
 	struct hwsim_tx_rate *tx_attempts;
-	struct sk_buff __user *ret_skb;
+	unsigned long ret_skb_ptr;
 	struct sk_buff *skb, *tmp;
 	struct mac_address *src;
 	unsigned int hwsim_flags;
@@ -1504,8 +1503,7 @@ static int hwsim_tx_info_frame_received_nl(struct sk_buff *skb_2,
 				   info->attrs[HWSIM_ATTR_ADDR_TRANSMITTER]);
 	hwsim_flags = nla_get_u32(info->attrs[HWSIM_ATTR_FLAGS]);
 
-	ret_skb = (struct sk_buff __user *)
-		  (unsigned long) nla_get_u64(info->attrs[HWSIM_ATTR_COOKIE]);
+	ret_skb_ptr = nla_get_u64(info->attrs[HWSIM_ATTR_COOKIE]);
 
 	data2 = get_hwsim_data_ref_from_addr(src);
 
@@ -1514,7 +1512,7 @@ static int hwsim_tx_info_frame_received_nl(struct sk_buff *skb_2,
 
 	/* look for the skb matching the cookie passed back from user */
 	skb_queue_walk_safe(&data2->pending, skb, tmp) {
-		if (skb == ret_skb) {
+		if ((unsigned long)skb == ret_skb_ptr) {
 			skb_unlink(skb, &data2->pending);
 			found = true;
 			break;
-- 
cgit v1.1


From 88e920b4505105b710f8d4a535ec02c4078f8e2e Mon Sep 17 00:00:00 2001
From: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
Date: Thu, 21 Jun 2012 11:09:54 -0700
Subject: nl80211: specify RSSI threshold in scheduled scan

Support configuring an RSSI threshold in dBm (s32) when requesting
scheduled scan, below which a BSS won't be reported by the cfg80211
driver.

Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/linux/nl80211.h | 6 ++++++
 include/net/cfg80211.h  | 2 ++
 net/wireless/nl80211.c  | 9 ++++++++-
 3 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index b7c3b73..c0fc5d2 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -1542,6 +1542,9 @@ enum nl80211_attrs {
 
 #define NL80211_MIN_REMAIN_ON_CHANNEL_TIME	10
 
+/* default RSSI threshold for scan results if none specified. */
+#define NL80211_SCAN_RSSI_THOLD_OFF		-300
+
 /**
  * enum nl80211_iftype - (virtual) interface types
  *
@@ -1974,6 +1977,8 @@ enum nl80211_reg_rule_attr {
  * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
  * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
  * only report BSS with matching SSID.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a
+ *	BSS in scan results. Filtering is turned off if not specified.
  * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
  *	attribute number currently defined
  * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
@@ -1982,6 +1987,7 @@ enum nl80211_sched_scan_match_attr {
 	__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID,
 
 	NL80211_SCHED_SCAN_MATCH_ATTR_SSID,
+	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI,
 
 	/* keep last */
 	__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index f0163a1..061c019 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1027,6 +1027,7 @@ struct cfg80211_match_set {
  * @wiphy: the wiphy this was for
  * @dev: the interface
  * @channels: channels to scan
+ * @rssi_thold: don't report scan results below this threshold (in s32 dBm)
  */
 struct cfg80211_sched_scan_request {
 	struct cfg80211_ssid *ssids;
@@ -1037,6 +1038,7 @@ struct cfg80211_sched_scan_request {
 	size_t ie_len;
 	struct cfg80211_match_set *match_sets;
 	int n_match_sets;
+	s32 rssi_thold;
 
 	/* internal */
 	struct wiphy *wiphy;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 888fadc..234ff3b 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -340,6 +340,7 @@ static const struct nla_policy
 nl80211_match_policy[NL80211_SCHED_SCAN_MATCH_ATTR_MAX + 1] = {
 	[NL80211_SCHED_SCAN_MATCH_ATTR_SSID] = { .type = NLA_BINARY,
 						 .len = IEEE80211_MAX_SSID_LEN },
+	[NL80211_SCHED_SCAN_MATCH_ATTR_RSSI] = { .type = NLA_U32 },
 };
 
 /* ifidx get helper */
@@ -4387,7 +4388,7 @@ static int nl80211_start_sched_scan(struct sk_buff *skb,
 		nla_for_each_nested(attr,
 				    info->attrs[NL80211_ATTR_SCHED_SCAN_MATCH],
 				    tmp) {
-			struct nlattr *ssid;
+			struct nlattr *ssid, *rssi;
 
 			nla_parse(tb, NL80211_SCHED_SCAN_MATCH_ATTR_MAX,
 				  nla_data(attr), nla_len(attr),
@@ -4403,6 +4404,12 @@ static int nl80211_start_sched_scan(struct sk_buff *skb,
 				request->match_sets[i].ssid.ssid_len =
 					nla_len(ssid);
 			}
+			rssi = tb[NL80211_SCHED_SCAN_MATCH_ATTR_RSSI];
+			if (rssi)
+				request->rssi_thold = nla_get_u32(rssi);
+			else
+				request->rssi_thold =
+						   NL80211_SCAN_RSSI_THOLD_OFF;
 			i++;
 		}
 	}
-- 
cgit v1.1


From 171243612f1612402fbf83f3f034a1beefcdea61 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Tue, 19 Jun 2012 16:16:22 +0200
Subject: mac80211: remove unused function

Remove the unused function is_ieee80211_device().

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/tx.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 37eda7e..ec8f5346 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -175,12 +175,6 @@ static __le16 ieee80211_duration(struct ieee80211_tx_data *tx,
 	return cpu_to_le16(dur);
 }
 
-static inline int is_ieee80211_device(struct ieee80211_local *local,
-				      struct net_device *dev)
-{
-	return local == wdev_priv(dev->ieee80211_ptr);
-}
-
 /* tx handlers */
 static ieee80211_tx_result debug_noinline
 ieee80211_tx_h_dynamic_ps(struct ieee80211_tx_data *tx)
-- 
cgit v1.1


From 371a255e863857f988a91a3850d6feeaa4f3c536 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Tue, 19 Jun 2012 15:54:05 +0200
Subject: mac80211: make ieee80211_check_concurrent_iface netdev-independent

ieee80211_check_concurrent_iface() need not use the
netdev. Remove the use of the netdev here to prepare
the function for P2P device addition.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/iface.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 5768803..58c2ab3 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -97,15 +97,12 @@ static int ieee80211_check_concurrent_iface(struct ieee80211_sub_if_data *sdata,
 {
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_sub_if_data *nsdata;
-	struct net_device *dev = sdata->dev;
 
 	ASSERT_RTNL();
 
 	/* we hold the RTNL here so can safely walk the list */
 	list_for_each_entry(nsdata, &local->interfaces, list) {
-		struct net_device *ndev = nsdata->dev;
-
-		if (ndev != dev && ieee80211_sdata_running(nsdata)) {
+		if (nsdata != sdata && ieee80211_sdata_running(nsdata)) {
 			/*
 			 * Allow only a single IBSS interface to be up at any
 			 * time. This is restricted because beacon distribution
@@ -124,7 +121,8 @@ static int ieee80211_check_concurrent_iface(struct ieee80211_sub_if_data *sdata,
 			 * The remaining checks are only performed for interfaces
 			 * with the same MAC address.
 			 */
-			if (!ether_addr_equal(dev->dev_addr, ndev->dev_addr))
+			if (!ether_addr_equal(sdata->vif.addr,
+					      nsdata->vif.addr))
 				continue;
 
 			/*
-- 
cgit v1.1


From e59bec1628654b6dcbad4e64d43c41c1f31d216c Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Mon, 25 Jun 2012 14:15:55 +0300
Subject: wl18xx: deprecate PG1 support

The new PG2 version of the chip has a few differences in terms of FW
API if compared to PG1.  PG1 is just a sample that shouldn't be used
in real life, so to avoid having to handle both separately, mark the
PG1 version as deprecated and bail out during probe.

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wl18xx/acx.h  | 34 ++++++++++++--------------
 drivers/net/wireless/ti/wl18xx/main.c | 45 ++++++-----------------------------
 2 files changed, 22 insertions(+), 57 deletions(-)

diff --git a/drivers/net/wireless/ti/wl18xx/acx.h b/drivers/net/wireless/ti/wl18xx/acx.h
index ebbaf61..e2609a6 100644
--- a/drivers/net/wireless/ti/wl18xx/acx.h
+++ b/drivers/net/wireless/ti/wl18xx/acx.h
@@ -32,25 +32,21 @@ enum {
 /* numbers of bits the length field takes (add 1 for the actual number) */
 #define WL18XX_HOST_IF_LEN_SIZE_FIELD 15
 
-#define WL18XX_ACX_EVENTS_VECTOR_PG1	(WL1271_ACX_INTR_WATCHDOG      | \
-					WL1271_ACX_INTR_INIT_COMPLETE | \
-					WL1271_ACX_INTR_EVENT_A       | \
-					WL1271_ACX_INTR_EVENT_B       | \
-					WL1271_ACX_INTR_CMD_COMPLETE  | \
-					WL1271_ACX_INTR_HW_AVAILABLE  | \
-					WL1271_ACX_INTR_DATA)
-
-#define WL18XX_ACX_EVENTS_VECTOR_PG2	(WL18XX_ACX_EVENTS_VECTOR_PG1 | \
-					WL1271_ACX_SW_INTR_WATCHDOG)
-
-#define WL18XX_INTR_MASK_PG1		(WL1271_ACX_INTR_WATCHDOG      | \
-					WL1271_ACX_INTR_EVENT_A       | \
-					WL1271_ACX_INTR_EVENT_B       | \
-					WL1271_ACX_INTR_HW_AVAILABLE  | \
-					WL1271_ACX_INTR_DATA)
-
-#define WL18XX_INTR_MASK_PG2		(WL18XX_INTR_MASK_PG1         | \
-					WL1271_ACX_SW_INTR_WATCHDOG)
+#define WL18XX_ACX_EVENTS_VECTOR	(WL1271_ACX_INTR_WATCHDOG	| \
+					 WL1271_ACX_INTR_INIT_COMPLETE	| \
+					 WL1271_ACX_INTR_EVENT_A	| \
+					 WL1271_ACX_INTR_EVENT_B	| \
+					 WL1271_ACX_INTR_CMD_COMPLETE	| \
+					 WL1271_ACX_INTR_HW_AVAILABLE	| \
+					 WL1271_ACX_INTR_DATA		| \
+					 WL1271_ACX_SW_INTR_WATCHDOG)
+
+#define WL18XX_INTR_MASK		(WL1271_ACX_INTR_WATCHDOG	| \
+					 WL1271_ACX_INTR_EVENT_A	| \
+					 WL1271_ACX_INTR_EVENT_B	| \
+					 WL1271_ACX_INTR_HW_AVAILABLE	| \
+					 WL1271_ACX_INTR_DATA		| \
+					 WL1271_ACX_SW_INTR_WATCHDOG)
 
 struct wl18xx_acx_host_config_bitmap {
 	struct acx_header header;
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index c25b960..5e583be8 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -612,20 +612,11 @@ static int wl18xx_identify_chip(struct wl1271 *wl)
 			      WLCORE_QUIRK_TX_PAD_LAST_FRAME;
 		break;
 	case CHIP_ID_185x_PG10:
-		wl1271_debug(DEBUG_BOOT, "chip id 0x%x (185x PG10)",
-			     wl->chip.id);
-		wl->sr_fw_name = WL18XX_FW_NAME;
-		/* wl18xx uses the same firmware for PLT */
-		wl->plt_fw_name = WL18XX_FW_NAME;
-		wl->quirks |= WLCORE_QUIRK_NO_ELP |
-			WLCORE_QUIRK_FWLOG_NOT_IMPLEMENTED |
-			WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN |
-			WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN;
-
-		/* PG 1.0 has some problems with MCS_13, so disable it */
-		wl->ht_cap[IEEE80211_BAND_2GHZ].mcs.rx_mask[1] &= ~BIT(5);
+		wl1271_warning("chip id 0x%x (185x PG10) is deprecated",
+			       wl->chip.id);
+		ret = -ENODEV;
+		goto out;
 
-		break;
 	default:
 		wl1271_warning("unsupported chip id: 0x%x", wl->chip.id);
 		ret = -ENODEV;
@@ -776,21 +767,14 @@ out:
 static int wl18xx_set_mac_and_phy(struct wl1271 *wl)
 {
 	struct wl18xx_priv *priv = wl->priv;
-	size_t len;
 	int ret;
 
-	/* the parameters struct is smaller for PG1 */
-	if (wl->chip.id == CHIP_ID_185x_PG10)
-		len = offsetof(struct wl18xx_mac_and_phy_params, psat) + 1;
-	else
-		len = sizeof(struct wl18xx_mac_and_phy_params);
-
 	ret = wlcore_set_partition(wl, &wl->ptable[PART_PHY_INIT]);
 	if (ret < 0)
 		goto out;
 
 	ret = wlcore_write(wl, WL18XX_PHY_INIT_MEM_ADDR, (u8 *)&priv->conf.phy,
-			   len, false);
+			   sizeof(struct wl18xx_mac_and_phy_params), false);
 
 out:
 	return ret;
@@ -801,13 +785,8 @@ static int wl18xx_enable_interrupts(struct wl1271 *wl)
 	u32 event_mask, intr_mask;
 	int ret;
 
-	if (wl->chip.id == CHIP_ID_185x_PG10) {
-		event_mask = WL18XX_ACX_EVENTS_VECTOR_PG1;
-		intr_mask = WL18XX_INTR_MASK_PG1;
-	} else {
-		event_mask = WL18XX_ACX_EVENTS_VECTOR_PG2;
-		intr_mask = WL18XX_INTR_MASK_PG2;
-	}
+	event_mask = WL18XX_ACX_EVENTS_VECTOR;
+	intr_mask = WL18XX_INTR_MASK;
 
 	ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK, event_mask);
 	if (ret < 0)
@@ -1049,16 +1028,6 @@ static u32 wl18xx_ap_get_mimo_wide_rate_mask(struct wl1271 *wl,
 	} else if (!strcmp(ht_mode_param, "mimo")) {
 		wl1271_debug(DEBUG_ACX, "using MIMO rate mask");
 
-		/*
-		 * PG 1.0 has some problems with MCS_13, so disable it
-		 *
-		 * TODO: instead of hacking this in here, we should
-		 * make it more general and change a bit in the
-		 * wlvif->rate_set instead.
-		 */
-		if (wl->chip.id == CHIP_ID_185x_PG10)
-			return CONF_TX_MIMO_RATES & ~CONF_HW_BIT_RATE_MCS_13;
-
 		return CONF_TX_MIMO_RATES;
 	} else {
 		return 0;
-- 
cgit v1.1


From 8b425e62d96a3b3a3cc68e6203267f92d1a01946 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <coelho@ti.com>
Date: Mon, 25 Jun 2012 14:41:20 +0300
Subject: wlcore: fix some failure cases in wlcore_probe()

We need to release the IRQ if hw_info() or identify_chip() fails.  And
we need unregister the HW with mac80211 if there are any failures
after it's registered.

Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/main.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 372ccf2..c5a9ffe 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -5520,12 +5520,12 @@ int __devinit wlcore_probe(struct wl1271 *wl, struct platform_device *pdev)
 	ret = wl12xx_get_hw_info(wl);
 	if (ret < 0) {
 		wl1271_error("couldn't get hw info");
-		goto out;
+		goto out_irq;
 	}
 
 	ret = wl->ops->identify_chip(wl);
 	if (ret < 0)
-		goto out;
+		goto out_irq;
 
 	ret = wl1271_init_ieee80211(wl);
 	if (ret)
@@ -5539,7 +5539,7 @@ int __devinit wlcore_probe(struct wl1271 *wl, struct platform_device *pdev)
 	ret = device_create_file(wl->dev, &dev_attr_bt_coex_state);
 	if (ret < 0) {
 		wl1271_error("failed to create sysfs file bt_coex_state");
-		goto out_irq;
+		goto out_unreg;
 	}
 
 	/* Create sysfs file to get HW PG version */
@@ -5564,6 +5564,9 @@ out_hw_pg_ver:
 out_bt_coex_state:
 	device_remove_file(wl->dev, &dev_attr_bt_coex_state);
 
+out_unreg:
+	wl1271_unregister_hw(wl);
+
 out_irq:
 	free_irq(wl->irq, wl);
 
-- 
cgit v1.1


From 7a50bdfb81a6bff96100cd2a2c95f8b3cf05bc0c Mon Sep 17 00:00:00 2001
From: Eyal Shapira <eyal@wizery.com>
Date: Tue, 26 Jun 2012 10:41:15 +0300
Subject: wlcore: fix broken TX due to wrong queuing of recovery

commit 14bba17b "wl12xx: Propagate errors from wl1271_raw_write32"
breaks down TX in certain scenarios. wl1271_irq_locked() propagates
errors from wl1271_tx_work_locked however it may return -EBUSY
when the FW queues are full which is a legitimate case and not a
a real error. In this case a recovery is triggered by wl1271_irq
and this keeps repeating itself so TX is completely broken.
Fix it by avoiding propagating return values as errors even if they
aren't. Only bus (SDIO or SPI) ops failures would be progagated
as only these should trigger recovery.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/tx.c | 35 ++++++++++++++++++++++++-----------
 1 file changed, 24 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c
index b5211be..6a28aee 100644
--- a/drivers/net/wireless/ti/wlcore/tx.c
+++ b/drivers/net/wireless/ti/wlcore/tx.c
@@ -352,8 +352,10 @@ static int wl1271_prepare_tx_frame(struct wl1271 *wl, struct wl12xx_vif *wlvif,
 	bool is_dummy;
 	bool is_gem = false;
 
-	if (!skb)
+	if (!skb) {
+		wl1271_error("discarding null skb");
 		return -EINVAL;
+	}
 
 	info = IEEE80211_SKB_CB(skb);
 
@@ -662,6 +664,16 @@ void wl12xx_rearm_rx_streaming(struct wl1271 *wl, unsigned long *active_hlids)
 	}
 }
 
+/*
+ * Returns failure values only in case of failed bus ops within this function.
+ * wl1271_prepare_tx_frame retvals won't be returned in order to avoid
+ * triggering recovery by higher layers when not necessary.
+ * In case a FW command fails within wl1271_prepare_tx_frame fails a recovery
+ * will be queued in wl1271_cmd_send. -EAGAIN/-EBUSY from prepare_tx_frame
+ * can occur and are legitimate so don't propagate. -EINVAL will emit a WARNING
+ * within prepare_tx_frame code but there's nothing we should do about those
+ * as well.
+ */
 int wlcore_tx_work_locked(struct wl1271 *wl)
 {
 	struct wl12xx_vif *wlvif;
@@ -671,9 +683,10 @@ int wlcore_tx_work_locked(struct wl1271 *wl)
 	bool sent_packets = false;
 	unsigned long active_hlids[BITS_TO_LONGS(WL12XX_MAX_LINKS)] = {0};
 	int ret = 0;
+	int bus_ret = 0;
 
 	if (unlikely(wl->state == WL1271_STATE_OFF))
-		return -EIO;
+		return 0;
 
 	while ((skb = wl1271_skb_dequeue(wl))) {
 		struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
@@ -694,9 +707,9 @@ int wlcore_tx_work_locked(struct wl1271 *wl)
 
 			buf_offset = wlcore_hw_pre_pkt_send(wl, buf_offset,
 							    last_len);
-			ret = wlcore_write_data(wl, REG_SLV_MEM_DATA,
-						wl->aggr_buf, buf_offset, true);
-			if (ret < 0)
+			bus_ret = wlcore_write_data(wl, REG_SLV_MEM_DATA,
+					     wl->aggr_buf, buf_offset, true);
+			if (bus_ret < 0)
 				goto out;
 
 			sent_packets = true;
@@ -734,9 +747,9 @@ int wlcore_tx_work_locked(struct wl1271 *wl)
 out_ack:
 	if (buf_offset) {
 		buf_offset = wlcore_hw_pre_pkt_send(wl, buf_offset, last_len);
-		ret = wlcore_write_data(wl, REG_SLV_MEM_DATA, wl->aggr_buf,
-					buf_offset, true);
-		if (ret < 0)
+		bus_ret = wlcore_write_data(wl, REG_SLV_MEM_DATA, wl->aggr_buf,
+					     buf_offset, true);
+		if (bus_ret < 0)
 			goto out;
 
 		sent_packets = true;
@@ -747,9 +760,9 @@ out_ack:
 		 * required for older hardware revisions
 		 */
 		if (wl->quirks & WLCORE_QUIRK_END_OF_TRANSACTION) {
-			ret = wlcore_write32(wl, WL12XX_HOST_WR_ACCESS,
+			bus_ret = wlcore_write32(wl, WL12XX_HOST_WR_ACCESS,
 					     wl->tx_packets_count);
-			if (ret < 0)
+			if (bus_ret < 0)
 				goto out;
 		}
 
@@ -758,7 +771,7 @@ out_ack:
 	wl12xx_rearm_rx_streaming(wl, active_hlids);
 
 out:
-	return ret;
+	return bus_ret;
 }
 
 void wl1271_tx_work(struct work_struct *work)
-- 
cgit v1.1


From 6c15c1aae206dc275a948a5e50f965c2382c6866 Mon Sep 17 00:00:00 2001
From: Eyal Shapira <eyal@wizery.com>
Date: Tue, 26 Jun 2012 10:41:16 +0300
Subject: wlcore: queue recovery in case of bus errors during cmd_remove_peer

Following the addition of propagating errors from the bus ops
there's a need to distinguish between bus errors (including timeout)
and a legitimate timeout occuring in cmd_wait_for_event_or_timeout.
In case of real bus errors we need to queue recovery even in cases
where a timeout on a response from the FW to a command is acceptable.

Reported-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/cmd.c | 29 +++++++++++++++++++----------
 1 file changed, 19 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c
index 84dd808..ef13938 100644
--- a/drivers/net/wireless/ti/wlcore/cmd.c
+++ b/drivers/net/wireless/ti/wlcore/cmd.c
@@ -133,24 +133,27 @@ fail:
  * Poll the mailbox event field until any of the bits in the mask is set or a
  * timeout occurs (WL1271_EVENT_TIMEOUT in msecs)
  */
-static int wl1271_cmd_wait_for_event_or_timeout(struct wl1271 *wl, u32 mask)
+static int wl1271_cmd_wait_for_event_or_timeout(struct wl1271 *wl,
+						u32 mask, bool *timeout)
 {
 	u32 *events_vector;
 	u32 event;
-	unsigned long timeout;
+	unsigned long timeout_time;
 	int ret = 0;
 
+	*timeout = false;
+
 	events_vector = kmalloc(sizeof(*events_vector), GFP_KERNEL | GFP_DMA);
 	if (!events_vector)
 		return -ENOMEM;
 
-	timeout = jiffies + msecs_to_jiffies(WL1271_EVENT_TIMEOUT);
+	timeout_time = jiffies + msecs_to_jiffies(WL1271_EVENT_TIMEOUT);
 
 	do {
-		if (time_after(jiffies, timeout)) {
+		if (time_after(jiffies, timeout_time)) {
 			wl1271_debug(DEBUG_CMD, "timeout waiting for event %d",
 				     (int)mask);
-			ret = -ETIMEDOUT;
+			*timeout = true;
 			goto out;
 		}
 
@@ -180,9 +183,10 @@ out:
 static int wl1271_cmd_wait_for_event(struct wl1271 *wl, u32 mask)
 {
 	int ret;
+	bool timeout = false;
 
-	ret = wl1271_cmd_wait_for_event_or_timeout(wl, mask);
-	if (ret != 0) {
+	ret = wl1271_cmd_wait_for_event_or_timeout(wl, mask, &timeout);
+	if (ret != 0 || timeout) {
 		wl12xx_queue_recovery_work(wl);
 		return ret;
 	}
@@ -1435,6 +1439,7 @@ int wl12xx_cmd_remove_peer(struct wl1271 *wl, u8 hlid)
 {
 	struct wl12xx_cmd_remove_peer *cmd;
 	int ret;
+	bool timeout = false;
 
 	wl1271_debug(DEBUG_CMD, "cmd remove peer %d", (int)hlid);
 
@@ -1455,12 +1460,16 @@ int wl12xx_cmd_remove_peer(struct wl1271 *wl, u8 hlid)
 		goto out_free;
 	}
 
+	ret = wl1271_cmd_wait_for_event_or_timeout(wl,
+					   PEER_REMOVE_COMPLETE_EVENT_ID,
+					   &timeout);
 	/*
 	 * We are ok with a timeout here. The event is sometimes not sent
-	 * due to a firmware bug.
+	 * due to a firmware bug. In case of another error (like SDIO timeout)
+	 * queue a recovery.
 	 */
-	wl1271_cmd_wait_for_event_or_timeout(wl,
-					     PEER_REMOVE_COMPLETE_EVENT_ID);
+	if (ret)
+		wl12xx_queue_recovery_work(wl);
 
 out_free:
 	kfree(cmd);
-- 
cgit v1.1


From 680c6055b9bebdf07fc2d5ebe816a14c7daecdc1 Mon Sep 17 00:00:00 2001
From: Eyal Shapira <eyal@wizery.com>
Date: Tue, 26 Jun 2012 10:41:17 +0300
Subject: wlcore: print stack trace in every recovery

As recovery queuing can now occur from multiple code paths
it's convenient to know what triggered it in all cases
other than an intended recovery which is part of the
switch between single role to multi role.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wlcore/cmd.c  | 1 -
 drivers/net/wireless/ti/wlcore/main.c | 2 ++
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c
index ef13938..56c7a23 100644
--- a/drivers/net/wireless/ti/wlcore/cmd.c
+++ b/drivers/net/wireless/ti/wlcore/cmd.c
@@ -124,7 +124,6 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
 	return 0;
 
 fail:
-	WARN_ON(1);
 	wl12xx_queue_recovery_work(wl);
 	return ret;
 }
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index c5a9ffe..2240cca 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -772,6 +772,8 @@ out:
 
 void wl12xx_queue_recovery_work(struct wl1271 *wl)
 {
+	WARN_ON(!test_bit(WL1271_FLAG_INTENDED_FW_RECOVERY, &wl->flags));
+
 	/* Avoid a recursive recovery */
 	if (!test_and_set_bit(WL1271_FLAG_RECOVERY_IN_PROGRESS, &wl->flags)) {
 		wlcore_disable_interrupts_nosync(wl);
-- 
cgit v1.1


From 5a2766abe42a0fa10a6a7177bece2a205f66bdb9 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Sun, 24 Jun 2012 11:06:29 -0500
Subject: rtlwifi: Fix IRQ disabled warning

The PCI-based drivers can generate the following warning:

[ 9497.776350] ------------[ cut here ]------------
[ 9497.776366] WARNING: at kernel/softirq.c:159 local_bh_enable_ip+0x7a/0xa0()
[ 9497.776370] Hardware name: 05794NC
[ 9497.776597] Pid: 6413, comm: hostapd Not tainted 3.3.0-4.fc16.x86_64 #1
[ 9497.776601] Call Trace:
[ 9497.776612]  [<ffffffff81057b1f>] warn_slowpath_common+0x7f/0xc0
[ 9497.776633]  [<ffffffffa034a099>] ? rtl_pci_reset_trx_ring+0x199/0x230
[rtlwifi]
[ 9497.776640]  [<ffffffff81057b7a>] warn_slowpath_null+0x1a/0x20
[ 9497.776646]  [<ffffffff8105f06a>] local_bh_enable_ip+0x7a/0xa0
[ 9497.776654]  [<ffffffff815f3ef6>] _raw_spin_unlock_bh+0x16/0x20
[ 9497.776671]  [<ffffffffa03e50de>] destroy_conntrack+0x9e/0x120
[nf_conntrack]
[ 9497.776681]  [<ffffffff81511847>] nf_conntrack_destroy+0x17/0x20
[ 9497.776689]  [<ffffffff814d9c85>] skb_release_head_state+0xe5/0x120
[ 9497.776695]  [<ffffffff814d98b6>] __kfree_skb+0x16/0xa0
[ 9497.776700]  [<ffffffff814d9a35>] kfree_skb+0x45/0xc0
[ 9497.776717]  [<ffffffffa034a099>] rtl_pci_reset_trx_ring+0x199/0x230
[rtlwifi]
[ 9497.776734]  [<ffffffffa034a155>] rtl_pci_start+0x25/0x1d0 [rtlwifi]
[ 9497.776750]  [<ffffffffa03440b5>] rtl_op_start+0x55/0x90 [rtlwifi]
[ 9497.776785]  [<ffffffffa02c4956>] ieee80211_do_open+0x296/0xa10 [mac80211]
[ 9497.776794]  [<ffffffff815f7ddd>] ? notifier_call_chain+0x4d/0x70
[ 9497.776828]  [<ffffffffa02c513d>] ieee80211_open+0x6d/0x80 [mac80211]
[ 9497.776836]  [<ffffffff814e8b3f>] __dev_open+0x8f/0xe0
[ 9497.776842]  [<ffffffff814e8de1>] __dev_change_flags+0xa1/0x180
[ 9497.776847]  [<ffffffff814e8f78>] dev_change_flags+0x28/0x70
[ 9497.776856]  [<ffffffff8154e99d>] devinet_ioctl+0x61d/0x7b0
[ 9497.776863]  [<ffffffff8154ef55>] inet_ioctl+0x75/0x90
[ 9497.776870]  [<ffffffff814cdd50>] sock_do_ioctl+0x30/0x70
[ 9497.776876]  [<ffffffff814cee09>] sock_ioctl+0x79/0x2f0
[ 9497.776885]  [<ffffffff81193498>] do_vfs_ioctl+0x98/0x550
[ 9497.776891]  [<ffffffff811939e1>] sys_ioctl+0x91/0xa0
[ 9497.776897]  [<ffffffff815fc029>] system_call_fastpath+0x16/0x1b
[ 9497.776902] ---[ end trace 22886c442489082d ]---

The cause is due to calling kfree_skb() with interrupts disabled.

This bug is discussed in https://bugzilla.redhat.com/show_bug.cgi?id=797709.

Reported-and-Tested by: Ivan Ivanovich <iivanich@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/pci.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index 2062ea1..36bffbc 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -1273,17 +1273,18 @@ int rtl_pci_reset_trx_ring(struct ieee80211_hw *hw)
 	 *after reset, release previous pending packet,
 	 *and force the  tx idx to the first one
 	 */
-	spin_lock_irqsave(&rtlpriv->locks.irq_th_lock, flags);
 	for (i = 0; i < RTL_PCI_MAX_TX_QUEUE_COUNT; i++) {
 		if (rtlpci->tx_ring[i].desc) {
 			struct rtl8192_tx_ring *ring = &rtlpci->tx_ring[i];
 
 			while (skb_queue_len(&ring->queue)) {
-				struct rtl_tx_desc *entry =
-				    &ring->desc[ring->idx];
-				struct sk_buff *skb =
-				    __skb_dequeue(&ring->queue);
+				struct rtl_tx_desc *entry;
+				struct sk_buff *skb;
 
+				spin_lock_irqsave(&rtlpriv->locks.irq_th_lock,
+						  flags);
+				entry = &ring->desc[ring->idx];
+				skb = __skb_dequeue(&ring->queue);
 				pci_unmap_single(rtlpci->pdev,
 						 rtlpriv->cfg->ops->
 							 get_desc((u8 *)
@@ -1291,15 +1292,15 @@ int rtl_pci_reset_trx_ring(struct ieee80211_hw *hw)
 							 true,
 							 HW_DESC_TXBUFF_ADDR),
 						 skb->len, PCI_DMA_TODEVICE);
-				kfree_skb(skb);
 				ring->idx = (ring->idx + 1) % ring->entries;
+				spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock,
+						  flags);
+				kfree_skb(skb);
 			}
 			ring->idx = 0;
 		}
 	}
 
-	spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags);
-
 	return 0;
 }
 
-- 
cgit v1.1


From 46e5129ba6e00ff110df17338bc8fe5ee8f2f8b2 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Sun, 24 Jun 2012 14:44:36 -0500
Subject: rtlwifi: rtl8192se: Fix double inclusion of header pci.h

The command "make includecheck" yields the following for the rtlwifi tree:

/home/finger/linux-2.6/drivers/net/wireless/rtlwifi/rtl8192se/sw.c: ../pci.h is included more than once.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtlwifi/rtl8192se/sw.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/sw.c b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
index 730bcc9..ad4b480 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
@@ -29,7 +29,6 @@
 
 #include "../wifi.h"
 #include "../core.h"
-#include "../pci.h"
 #include "../base.h"
 #include "../pci.h"
 #include "reg.h"
-- 
cgit v1.1


From 313eb87f1e2f93d83836de7f5c1947b75d7752c8 Mon Sep 17 00:00:00 2001
From: Sven Eckelmann <sven@narfation.org>
Date: Mon, 25 Jun 2012 07:15:22 +0200
Subject: ath9k: raise aggregation limit to 64k for HT IBSS

mac80211 adds stations in HT IBSS as soon as a frame comes by,
even if the HT capabilities are not known yet (they are often
received later, e.g. in beacons). So far, ampdu factor/density
are only calculated when the station is initially added.

This patch changes this to update ampdu factor/density settings
when starting a blockack session.

Using this patch, we had performance boosts from 60 to 150 MBit/s
between two 2x2 Atheros devices in 5 GHz HT IBSS mode.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ath9k.h |  1 +
 drivers/net/wireless/ath/ath9k/main.c  |  6 ++++--
 drivers/net/wireless/ath/ath9k/xmit.c  | 12 ++++++++++++
 3 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index a8c0500..4473278 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -721,6 +721,7 @@ extern int ath9k_modparam_nohwcrypt;
 extern int led_blink;
 extern bool is_ath9k_unloaded;
 
+u8 ath9k_parse_mpdudensity(u8 mpdudensity);
 irqreturn_t ath_isr(int irq, void *dev);
 int ath9k_init_device(u16 devid, struct ath_softc *sc,
 		    const struct ath_bus_ops *bus_ops);
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 85f9ab4..e2e6958 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -19,7 +19,7 @@
 #include "ath9k.h"
 #include "btcoex.h"
 
-static u8 parse_mpdudensity(u8 mpdudensity)
+u8 ath9k_parse_mpdudensity(u8 mpdudensity)
 {
 	/*
 	 * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing":
@@ -320,6 +320,7 @@ static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta,
 			    struct ieee80211_vif *vif)
 {
 	struct ath_node *an;
+	u8 density;
 	an = (struct ath_node *)sta->drv_priv;
 
 #ifdef CONFIG_ATH9K_DEBUGFS
@@ -334,7 +335,8 @@ static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta,
 		ath_tx_node_init(sc, an);
 		an->maxampdu = 1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
 				     sta->ht_cap.ampdu_factor);
-		an->mpdudensity = parse_mpdudensity(sta->ht_cap.ampdu_density);
+		density = ath9k_parse_mpdudensity(sta->ht_cap.ampdu_density);
+		an->mpdudensity = density;
 	}
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index f777ddc..2afc5e2 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1175,6 +1175,7 @@ int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta,
 {
 	struct ath_atx_tid *txtid;
 	struct ath_node *an;
+	u8 density;
 
 	an = (struct ath_node *)sta->drv_priv;
 	txtid = ATH_AN_2_TID(an, tid);
@@ -1182,6 +1183,17 @@ int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta,
 	if (txtid->state & (AGGR_CLEANUP | AGGR_ADDBA_COMPLETE))
 		return -EAGAIN;
 
+	/* update ampdu factor/density, they may have changed. This may happen
+	 * in HT IBSS when a beacon with HT-info is received after the station
+	 * has already been added.
+	 */
+	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
+		an->maxampdu = 1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
+				     sta->ht_cap.ampdu_factor);
+		density = ath9k_parse_mpdudensity(sta->ht_cap.ampdu_density);
+		an->mpdudensity = density;
+	}
+
 	txtid->state |= AGGR_ADDBA_PROGRESS;
 	txtid->paused = true;
 	*ssn = txtid->seq_start = txtid->seq_next;
-- 
cgit v1.1


From fad29cd2f59949581050a937786c2c9bc78b2f04 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Mon, 25 Jun 2012 13:54:22 +0530
Subject: ath9k: Fix lockdep splat

Cancel the MCI work only when MCI is actually enabled.
Fixes this:

[96833.124051] Call Trace:
[96833.124060]  [<ffffffff810afaf8>] __lock_acquire+0x1518/0x1e40
[96833.124065]  [<ffffffff810ad126>] ? mark_held_locks+0x86/0x110
[96833.124069]  [<ffffffff810ad3ad>] ? trace_hardirqs_on+0xd/0x10
[96833.124073]  [<ffffffff814464f0>] ? _raw_spin_unlock_irq+0x30/0x70
[96833.124078]  [<ffffffff81072968>] ? wait_on_cpu_work+0x98/0xc0
[96833.124082]  [<ffffffff810b0a11>] lock_acquire+0xa1/0x150
[96833.124085]  [<ffffffff81072990>] ? wait_on_cpu_work+0xc0/0xc0
[96833.124088]  [<ffffffff81072990>] ? wait_on_cpu_work+0xc0/0xc0
[96833.124092]  [<ffffffff810729e2>] wait_on_work+0x52/0x120
[96833.124095]  [<ffffffff81072990>] ? wait_on_cpu_work+0xc0/0xc0
[96833.124099]  [<ffffffff81063b3f>] ? del_timer+0x7f/0x110
[96833.124102]  [<ffffffff81072c13>] __cancel_work_timer+0x83/0x130
[96833.124106]  [<ffffffff81072cf0>] cancel_work_sync+0x10/0x20
[96833.124113]  [<ffffffffa065b5cd>] __ath_cancel_work+0x4d/0x60 [ath9k]
[96833.124119]  [<ffffffffa065cf28>] ath9k_config+0x458/0x680 [ath9k]
[96833.124125]  [<ffffffffa065dd1e>] ? ath9k_flush+0x6e/0x1d0 [ath9k]
[96833.124129]  [<ffffffff8144394d>] ? __mutex_unlock_slowpath+0x10d/0x190
[96833.124146]  [<ffffffffa056c7b5>] ieee80211_hw_config+0x135/0x2a0 [mac80211]
[96833.124163]  [<ffffffffa057ebbb>] ieee80211_do_open+0x67b/0xc50 [mac80211]
[96833.124178]  [<ffffffffa057f1fd>] ieee80211_open+0x6d/0x80 [mac80211]
[96833.124183]  [<ffffffff8137a44f>] __dev_open+0x9f/0xf0
[96833.124187]  [<ffffffff8137a701>] __dev_change_flags+0xa1/0x180
[96833.124190]  [<ffffffff8137a898>] dev_change_flags+0x28/0x70
[96833.124195]  [<ffffffff813e1179>] devinet_ioctl+0x659/0x780
[96833.124199]  [<ffffffff8137aea0>] ? dev_ioctl+0x210/0x6d0
[96833.124203]  [<ffffffff813e1db5>] inet_ioctl+0x75/0x90
[96833.124208]  [<ffffffff8135e0e0>] sock_do_ioctl+0x30/0x70
[96833.124211]  [<ffffffff8135e3dd>] sock_ioctl+0x7d/0x2c0
[96833.124218]  [<ffffffff81193c39>] do_vfs_ioctl+0x99/0x580
[96833.124222]  [<ffffffff81447415>] ? sysret_check+0x22/0x5d
[96833.124226]  [<ffffffff811941b9>] sys_ioctl+0x99/0xa0
[96833.124230]  [<ffffffff814473e9>] system_call_fastpath+0x16/0x1b

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index e2e6958..c14cf5a 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -150,9 +150,9 @@ static void __ath_cancel_work(struct ath_softc *sc)
 	cancel_work_sync(&sc->hw_check_work);
 	cancel_delayed_work_sync(&sc->tx_complete_work);
 	cancel_delayed_work_sync(&sc->hw_pll_work);
-#ifdef CONFIG_ATH9K_BTCOEX_SUPPORT
-	cancel_work_sync(&sc->mci_work);
-#endif
+
+	if (ath9k_hw_mci_is_enabled(sc->sc_ah))
+		cancel_work_sync(&sc->mci_work);
 }
 
 static void ath_cancel_work(struct ath_softc *sc)
-- 
cgit v1.1


From fb1c078edb50376c14e049b22b10768b8245428a Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Mon, 25 Jun 2012 13:54:30 +0530
Subject: ath9k_htc: Change default listen interval to 1

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc_drv_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index 25213d5..cac6ff4 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -718,7 +718,7 @@ static void ath9k_set_hw_capab(struct ath9k_htc_priv *priv,
 
 	hw->queues = 4;
 	hw->channel_change_time = 5000;
-	hw->max_listen_interval = 10;
+	hw->max_listen_interval = 1;
 
 	hw->vif_data_size = sizeof(struct ath9k_htc_vif);
 	hw->sta_data_size = sizeof(struct ath9k_htc_sta);
-- 
cgit v1.1


From d8a2c51cdcaee0131c88f49d64b84f1c7361d72c Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Mon, 25 Jun 2012 13:54:41 +0530
Subject: ath9k_htc: Use atomic operations for op_flags

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc.h            |  2 +-
 drivers/net/wireless/ath/ath9k/htc_drv_beacon.c | 10 ++++-----
 drivers/net/wireless/ath/ath9k/htc_drv_gpio.c   | 30 ++++++++++++-------------
 drivers/net/wireless/ath/ath9k/htc_drv_init.c   |  2 +-
 drivers/net/wireless/ath/ath9k/htc_drv_main.c   | 28 +++++++++++------------
 drivers/net/wireless/ath/ath9k/htc_drv_txrx.c   |  2 +-
 6 files changed, 37 insertions(+), 37 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index 1357952..1ee6548 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -453,7 +453,6 @@ struct ath9k_htc_priv {
 	u8 num_sta_assoc_vif;
 	u8 num_ap_vif;
 
-	u16 op_flags;
 	u16 curtxpow;
 	u16 txpowlimit;
 	u16 nvifs;
@@ -461,6 +460,7 @@ struct ath9k_htc_priv {
 	bool rearm_ani;
 	bool reconfig_beacon;
 	unsigned int rxfilter;
+	unsigned long op_flags;
 
 	struct ath9k_hw_cal_data caldata;
 	struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
index 2eadffb..77d541f 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
@@ -207,9 +207,9 @@ static void ath9k_htc_beacon_config_ap(struct ath9k_htc_priv *priv,
 	else
 		priv->ah->config.sw_beacon_response_time = MIN_SWBA_RESPONSE;
 
-	if (priv->op_flags & OP_TSF_RESET) {
+	if (test_bit(OP_TSF_RESET, &priv->op_flags)) {
 		ath9k_hw_reset_tsf(priv->ah);
-		priv->op_flags &= ~OP_TSF_RESET;
+		clear_bit(OP_TSF_RESET, &priv->op_flags);
 	} else {
 		/*
 		 * Pull nexttbtt forward to reflect the current TSF.
@@ -221,7 +221,7 @@ static void ath9k_htc_beacon_config_ap(struct ath9k_htc_priv *priv,
 		} while (nexttbtt < tsftu);
 	}
 
-	if (priv->op_flags & OP_ENABLE_BEACON)
+	if (test_bit(OP_ENABLE_BEACON, &priv->op_flags))
 		imask |= ATH9K_INT_SWBA;
 
 	ath_dbg(common, CONFIG,
@@ -269,7 +269,7 @@ static void ath9k_htc_beacon_config_adhoc(struct ath9k_htc_priv *priv,
 	else
 		priv->ah->config.sw_beacon_response_time = MIN_SWBA_RESPONSE;
 
-	if (priv->op_flags & OP_ENABLE_BEACON)
+	if (test_bit(OP_ENABLE_BEACON, &priv->op_flags))
 		imask |= ATH9K_INT_SWBA;
 
 	ath_dbg(common, CONFIG,
@@ -365,7 +365,7 @@ static void ath9k_htc_send_beacon(struct ath9k_htc_priv *priv,
 	vif = priv->cur_beacon_conf.bslot[slot];
 	avp = (struct ath9k_htc_vif *)vif->drv_priv;
 
-	if (unlikely(priv->op_flags & OP_SCANNING)) {
+	if (unlikely(test_bit(OP_SCANNING, &priv->op_flags))) {
 		spin_unlock_bh(&priv->beacon_lock);
 		return;
 	}
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c b/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c
index 1c10e2e..3688bba 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c
@@ -37,17 +37,18 @@ static void ath_detect_bt_priority(struct ath9k_htc_priv *priv)
 
 	if (time_after(jiffies, btcoex->bt_priority_time +
 			msecs_to_jiffies(ATH_BT_PRIORITY_TIME_THRESHOLD))) {
-		priv->op_flags &= ~(OP_BT_PRIORITY_DETECTED | OP_BT_SCAN);
+		clear_bit(OP_BT_PRIORITY_DETECTED, &priv->op_flags);
+		clear_bit(OP_BT_SCAN, &priv->op_flags);
 		/* Detect if colocated bt started scanning */
 		if (btcoex->bt_priority_cnt >= ATH_BT_CNT_SCAN_THRESHOLD) {
 			ath_dbg(ath9k_hw_common(ah), BTCOEX,
 				"BT scan detected\n");
-			priv->op_flags |= (OP_BT_SCAN |
-					 OP_BT_PRIORITY_DETECTED);
+			set_bit(OP_BT_PRIORITY_DETECTED, &priv->op_flags);
+			set_bit(OP_BT_SCAN, &priv->op_flags);
 		} else if (btcoex->bt_priority_cnt >= ATH_BT_CNT_THRESHOLD) {
 			ath_dbg(ath9k_hw_common(ah), BTCOEX,
 				"BT priority traffic detected\n");
-			priv->op_flags |= OP_BT_PRIORITY_DETECTED;
+			set_bit(OP_BT_PRIORITY_DETECTED, &priv->op_flags);
 		}
 
 		btcoex->bt_priority_cnt = 0;
@@ -67,26 +68,23 @@ static void ath_btcoex_period_work(struct work_struct *work)
 	struct ath_btcoex *btcoex = &priv->btcoex;
 	struct ath_common *common = ath9k_hw_common(priv->ah);
 	u32 timer_period;
-	bool is_btscan;
 	int ret;
 
 	ath_detect_bt_priority(priv);
 
-	is_btscan = !!(priv->op_flags & OP_BT_SCAN);
-
 	ret = ath9k_htc_update_cap_target(priv,
-				  !!(priv->op_flags & OP_BT_PRIORITY_DETECTED));
+			  test_bit(OP_BT_PRIORITY_DETECTED, &priv->op_flags));
 	if (ret) {
 		ath_err(common, "Unable to set BTCOEX parameters\n");
 		return;
 	}
 
-	ath9k_hw_btcoex_bt_stomp(priv->ah, is_btscan ? ATH_BTCOEX_STOMP_ALL :
-			btcoex->bt_stomp_type);
+	ath9k_hw_btcoex_bt_stomp(priv->ah, test_bit(OP_BT_SCAN, &priv->op_flags) ?
+				 ATH_BTCOEX_STOMP_ALL : btcoex->bt_stomp_type);
 
 	ath9k_hw_btcoex_enable(priv->ah);
-	timer_period = is_btscan ? btcoex->btscan_no_stomp :
-		btcoex->btcoex_no_stomp;
+	timer_period = test_bit(OP_BT_SCAN, &priv->op_flags) ?
+		btcoex->btscan_no_stomp : btcoex->btcoex_no_stomp;
 	ieee80211_queue_delayed_work(priv->hw, &priv->duty_cycle_work,
 				     msecs_to_jiffies(timer_period));
 	ieee80211_queue_delayed_work(priv->hw, &priv->coex_period_work,
@@ -104,14 +102,15 @@ static void ath_btcoex_duty_cycle_work(struct work_struct *work)
 	struct ath_hw *ah = priv->ah;
 	struct ath_btcoex *btcoex = &priv->btcoex;
 	struct ath_common *common = ath9k_hw_common(ah);
-	bool is_btscan = priv->op_flags & OP_BT_SCAN;
 
 	ath_dbg(common, BTCOEX, "time slice work for bt and wlan\n");
 
-	if (btcoex->bt_stomp_type == ATH_BTCOEX_STOMP_LOW || is_btscan)
+	if (btcoex->bt_stomp_type == ATH_BTCOEX_STOMP_LOW ||
+	    test_bit(OP_BT_SCAN, &priv->op_flags))
 		ath9k_hw_btcoex_bt_stomp(ah, ATH_BTCOEX_STOMP_NONE);
 	else if (btcoex->bt_stomp_type == ATH_BTCOEX_STOMP_ALL)
 		ath9k_hw_btcoex_bt_stomp(ah, ATH_BTCOEX_STOMP_LOW);
+
 	ath9k_hw_btcoex_enable(priv->ah);
 }
 
@@ -141,7 +140,8 @@ static void ath_htc_resume_btcoex_work(struct ath9k_htc_priv *priv)
 
 	btcoex->bt_priority_cnt = 0;
 	btcoex->bt_priority_time = jiffies;
-	priv->op_flags &= ~(OP_BT_PRIORITY_DETECTED | OP_BT_SCAN);
+	clear_bit(OP_BT_PRIORITY_DETECTED, &priv->op_flags);
+	clear_bit(OP_BT_SCAN, &priv->op_flags);
 	ieee80211_queue_delayed_work(priv->hw, &priv->coex_period_work, 0);
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index cac6ff4..a035a38 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -611,7 +611,7 @@ static int ath9k_init_priv(struct ath9k_htc_priv *priv,
 	struct ath_common *common;
 	int i, ret = 0, csz = 0;
 
-	priv->op_flags |= OP_INVALID;
+	set_bit(OP_INVALID, &priv->op_flags);
 
 	ah = kzalloc(sizeof(struct ath_hw), GFP_KERNEL);
 	if (!ah)
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index 2b8f61c..0fc0d35 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -250,7 +250,7 @@ static int ath9k_htc_set_channel(struct ath9k_htc_priv *priv,
 	u8 cmd_rsp;
 	int ret;
 
-	if (priv->op_flags & OP_INVALID)
+	if (test_bit(OP_INVALID, &priv->op_flags))
 		return -EIO;
 
 	fastcc = !!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL);
@@ -304,7 +304,7 @@ static int ath9k_htc_set_channel(struct ath9k_htc_priv *priv,
 
 	htc_start(priv->htc);
 
-	if (!(priv->op_flags & OP_SCANNING) &&
+	if (!test_bit(OP_SCANNING, &priv->op_flags) &&
 	    !(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL))
 		ath9k_htc_vif_reconfig(priv);
 
@@ -750,7 +750,7 @@ void ath9k_htc_start_ani(struct ath9k_htc_priv *priv)
 	common->ani.shortcal_timer = timestamp;
 	common->ani.checkani_timer = timestamp;
 
-	priv->op_flags |= OP_ANI_RUNNING;
+	set_bit(OP_ANI_RUNNING, &priv->op_flags);
 
 	ieee80211_queue_delayed_work(common->hw, &priv->ani_work,
 				     msecs_to_jiffies(ATH_ANI_POLLINTERVAL));
@@ -759,7 +759,7 @@ void ath9k_htc_start_ani(struct ath9k_htc_priv *priv)
 void ath9k_htc_stop_ani(struct ath9k_htc_priv *priv)
 {
 	cancel_delayed_work_sync(&priv->ani_work);
-	priv->op_flags &= ~OP_ANI_RUNNING;
+	clear_bit(OP_ANI_RUNNING, &priv->op_flags);
 }
 
 void ath9k_htc_ani_work(struct work_struct *work)
@@ -944,7 +944,7 @@ static int ath9k_htc_start(struct ieee80211_hw *hw)
 		ath_dbg(common, CONFIG,
 			"Failed to update capability in target\n");
 
-	priv->op_flags &= ~OP_INVALID;
+	clear_bit(OP_INVALID, &priv->op_flags);
 	htc_start(priv->htc);
 
 	spin_lock_bh(&priv->tx.tx_lock);
@@ -973,7 +973,7 @@ static void ath9k_htc_stop(struct ieee80211_hw *hw)
 
 	mutex_lock(&priv->mutex);
 
-	if (priv->op_flags & OP_INVALID) {
+	if (test_bit(OP_INVALID, &priv->op_flags)) {
 		ath_dbg(common, ANY, "Device not present\n");
 		mutex_unlock(&priv->mutex);
 		return;
@@ -1015,7 +1015,7 @@ static void ath9k_htc_stop(struct ieee80211_hw *hw)
 	ath9k_htc_ps_restore(priv);
 	ath9k_htc_setpower(priv, ATH9K_PM_FULL_SLEEP);
 
-	priv->op_flags |= OP_INVALID;
+	set_bit(OP_INVALID, &priv->op_flags);
 
 	ath_dbg(common, CONFIG, "Driver halt\n");
 	mutex_unlock(&priv->mutex);
@@ -1105,7 +1105,7 @@ static int ath9k_htc_add_interface(struct ieee80211_hw *hw,
 	ath9k_htc_set_opmode(priv);
 
 	if ((priv->ah->opmode == NL80211_IFTYPE_AP) &&
-	    !(priv->op_flags & OP_ANI_RUNNING)) {
+	    !test_bit(OP_ANI_RUNNING, &priv->op_flags)) {
 		ath9k_hw_set_tsfadjust(priv->ah, 1);
 		ath9k_htc_start_ani(priv);
 	}
@@ -1285,7 +1285,7 @@ static void ath9k_htc_configure_filter(struct ieee80211_hw *hw,
 	changed_flags &= SUPPORTED_FILTERS;
 	*total_flags &= SUPPORTED_FILTERS;
 
-	if (priv->op_flags & OP_INVALID) {
+	if (test_bit(OP_INVALID, &priv->op_flags)) {
 		ath_dbg(ath9k_hw_common(priv->ah), ANY,
 			"Unable to configure filter on invalid state\n");
 		mutex_unlock(&priv->mutex);
@@ -1517,7 +1517,7 @@ static void ath9k_htc_bss_info_changed(struct ieee80211_hw *hw,
 		ath_dbg(common, CONFIG, "Beacon enabled for BSS: %pM\n",
 			bss_conf->bssid);
 		ath9k_htc_set_tsfadjust(priv, vif);
-		priv->op_flags |= OP_ENABLE_BEACON;
+		set_bit(OP_ENABLE_BEACON, &priv->op_flags);
 		ath9k_htc_beacon_config(priv, vif);
 	}
 
@@ -1530,7 +1530,7 @@ static void ath9k_htc_bss_info_changed(struct ieee80211_hw *hw,
 			ath_dbg(common, CONFIG,
 				"Beacon disabled for BSS: %pM\n",
 				bss_conf->bssid);
-			priv->op_flags &= ~OP_ENABLE_BEACON;
+			clear_bit(OP_ENABLE_BEACON, &priv->op_flags);
 			ath9k_htc_beacon_config(priv, vif);
 		}
 	}
@@ -1543,7 +1543,7 @@ static void ath9k_htc_bss_info_changed(struct ieee80211_hw *hw,
 		    (priv->nvifs == 1) &&
 		    (priv->num_ap_vif == 1) &&
 		    (vif->type == NL80211_IFTYPE_AP)) {
-			priv->op_flags |= OP_TSF_RESET;
+			set_bit(OP_TSF_RESET, &priv->op_flags);
 		}
 		ath_dbg(common, CONFIG,
 			"Beacon interval changed for BSS: %pM\n",
@@ -1655,7 +1655,7 @@ static void ath9k_htc_sw_scan_start(struct ieee80211_hw *hw)
 
 	mutex_lock(&priv->mutex);
 	spin_lock_bh(&priv->beacon_lock);
-	priv->op_flags |= OP_SCANNING;
+	set_bit(OP_SCANNING, &priv->op_flags);
 	spin_unlock_bh(&priv->beacon_lock);
 	cancel_work_sync(&priv->ps_work);
 	ath9k_htc_stop_ani(priv);
@@ -1668,7 +1668,7 @@ static void ath9k_htc_sw_scan_complete(struct ieee80211_hw *hw)
 
 	mutex_lock(&priv->mutex);
 	spin_lock_bh(&priv->beacon_lock);
-	priv->op_flags &= ~OP_SCANNING;
+	clear_bit(OP_SCANNING, &priv->op_flags);
 	spin_unlock_bh(&priv->beacon_lock);
 	ath9k_htc_ps_wakeup(priv);
 	ath9k_htc_vif_reconfig(priv);
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
index 3e40a64..47e61d0 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
@@ -916,7 +916,7 @@ void ath9k_host_rx_init(struct ath9k_htc_priv *priv)
 {
 	ath9k_hw_rxena(priv->ah);
 	ath9k_htc_opmode_init(priv);
-	ath9k_hw_startpcureceive(priv->ah, (priv->op_flags & OP_SCANNING));
+	ath9k_hw_startpcureceive(priv->ah, test_bit(OP_SCANNING, &priv->op_flags));
 	priv->rx.last_rssi = ATH_RSSI_DUMMY_MARKER;
 }
 
-- 
cgit v1.1


From 6bcfe67f9865fb51ec78fc9b09887375db7e08b5 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Mon, 25 Jun 2012 13:54:49 +0530
Subject: ath9k_htc: Fix IDLE power save

Remove the radio enable/disable stuff and fix the
transition to FULL_SLEEP mode when the device is idle.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/htc.h          |  2 -
 drivers/net/wireless/ath/ath9k/htc_drv_gpio.c | 92 ---------------------------
 drivers/net/wireless/ath/ath9k/htc_drv_main.c | 50 ++++++---------
 3 files changed, 20 insertions(+), 124 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index 1ee6548..936e920 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -572,8 +572,6 @@ bool ath9k_htc_setpower(struct ath9k_htc_priv *priv,
 
 void ath9k_start_rfkill_poll(struct ath9k_htc_priv *priv);
 void ath9k_htc_rfkill_poll_state(struct ieee80211_hw *hw);
-void ath9k_htc_radio_enable(struct ieee80211_hw *hw);
-void ath9k_htc_radio_disable(struct ieee80211_hw *hw);
 
 #ifdef CONFIG_MAC80211_LEDS
 void ath9k_init_leds(struct ath9k_htc_priv *priv);
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c b/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c
index 3688bba..07df279 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c
@@ -310,95 +310,3 @@ void ath9k_start_rfkill_poll(struct ath9k_htc_priv *priv)
 	if (priv->ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
 		wiphy_rfkill_start_polling(priv->hw->wiphy);
 }
-
-void ath9k_htc_radio_enable(struct ieee80211_hw *hw)
-{
-	struct ath9k_htc_priv *priv = hw->priv;
-	struct ath_hw *ah = priv->ah;
-	struct ath_common *common = ath9k_hw_common(ah);
-	int ret;
-	u8 cmd_rsp;
-
-	if (!ah->curchan)
-		ah->curchan = ath9k_cmn_get_curchannel(hw, ah);
-
-	/* Reset the HW */
-	ret = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
-	if (ret) {
-		ath_err(common,
-			"Unable to reset hardware; reset status %d (freq %u MHz)\n",
-			ret, ah->curchan->channel);
-	}
-
-	ath9k_cmn_update_txpow(ah, priv->curtxpow, priv->txpowlimit,
-			       &priv->curtxpow);
-
-	/* Start RX */
-	WMI_CMD(WMI_START_RECV_CMDID);
-	ath9k_host_rx_init(priv);
-
-	/* Start TX */
-	htc_start(priv->htc);
-	spin_lock_bh(&priv->tx.tx_lock);
-	priv->tx.flags &= ~ATH9K_HTC_OP_TX_QUEUES_STOP;
-	spin_unlock_bh(&priv->tx.tx_lock);
-	ieee80211_wake_queues(hw);
-
-	WMI_CMD(WMI_ENABLE_INTR_CMDID);
-
-	/* Enable LED */
-	ath9k_hw_cfg_output(ah, ah->led_pin,
-			    AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
-	ath9k_hw_set_gpio(ah, ah->led_pin, 0);
-}
-
-void ath9k_htc_radio_disable(struct ieee80211_hw *hw)
-{
-	struct ath9k_htc_priv *priv = hw->priv;
-	struct ath_hw *ah = priv->ah;
-	struct ath_common *common = ath9k_hw_common(ah);
-	int ret;
-	u8 cmd_rsp;
-
-	ath9k_htc_ps_wakeup(priv);
-
-	/* Disable LED */
-	ath9k_hw_set_gpio(ah, ah->led_pin, 1);
-	ath9k_hw_cfg_gpio_input(ah, ah->led_pin);
-
-	WMI_CMD(WMI_DISABLE_INTR_CMDID);
-
-	/* Stop TX */
-	ieee80211_stop_queues(hw);
-	ath9k_htc_tx_drain(priv);
-	WMI_CMD(WMI_DRAIN_TXQ_ALL_CMDID);
-
-	/* Stop RX */
-	WMI_CMD(WMI_STOP_RECV_CMDID);
-
-	/* Clear the WMI event queue */
-	ath9k_wmi_event_drain(priv);
-
-	/*
-	 * The MIB counters have to be disabled here,
-	 * since the target doesn't do it.
-	 */
-	ath9k_hw_disable_mib_counters(ah);
-
-	if (!ah->curchan)
-		ah->curchan = ath9k_cmn_get_curchannel(hw, ah);
-
-	/* Reset the HW */
-	ret = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
-	if (ret) {
-		ath_err(common,
-			"Unable to reset hardware; reset status %d (freq %u MHz)\n",
-			ret, ah->curchan->channel);
-	}
-
-	/* Disable the PHY */
-	ath9k_hw_phy_disable(ah);
-
-	ath9k_htc_ps_restore(priv);
-	ath9k_htc_setpower(priv, ATH9K_PM_FULL_SLEEP);
-}
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index 0fc0d35..fc8cd828 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -75,14 +75,19 @@ unlock:
 
 void ath9k_htc_ps_restore(struct ath9k_htc_priv *priv)
 {
+	bool reset;
+
 	mutex_lock(&priv->htc_pm_lock);
 	if (--priv->ps_usecount != 0)
 		goto unlock;
 
-	if (priv->ps_idle)
+	if (priv->ps_idle) {
+		ath9k_hw_setrxabort(priv->ah, true);
+		ath9k_hw_stopdmarecv(priv->ah, &reset);
 		ath9k_hw_setpower(priv->ah, ATH9K_PM_FULL_SLEEP);
-	else if (priv->ps_enabled)
+	} else if (priv->ps_enabled) {
 		ath9k_hw_setpower(priv->ah, ATH9K_PM_NETWORK_SLEEP);
+	}
 
 unlock:
 	mutex_unlock(&priv->htc_pm_lock);
@@ -1178,24 +1183,20 @@ static int ath9k_htc_config(struct ieee80211_hw *hw, u32 changed)
 	struct ath9k_htc_priv *priv = hw->priv;
 	struct ath_common *common = ath9k_hw_common(priv->ah);
 	struct ieee80211_conf *conf = &hw->conf;
+	bool chip_reset = false;
+	int ret = 0;
 
 	mutex_lock(&priv->mutex);
+	ath9k_htc_ps_wakeup(priv);
 
 	if (changed & IEEE80211_CONF_CHANGE_IDLE) {
-		bool enable_radio = false;
-		bool idle = !!(conf->flags & IEEE80211_CONF_IDLE);
-
 		mutex_lock(&priv->htc_pm_lock);
-		if (!idle && priv->ps_idle)
-			enable_radio = true;
-		priv->ps_idle = idle;
-		mutex_unlock(&priv->htc_pm_lock);
 
-		if (enable_radio) {
-			ath_dbg(common, CONFIG, "not-idle: enabling radio\n");
-			ath9k_htc_setpower(priv, ATH9K_PM_AWAKE);
-			ath9k_htc_radio_enable(hw);
-		}
+		priv->ps_idle = !!(conf->flags & IEEE80211_CONF_IDLE);
+		if (priv->ps_idle)
+			chip_reset = true;
+
+		mutex_unlock(&priv->htc_pm_lock);
 	}
 
 	/*
@@ -1210,7 +1211,7 @@ static int ath9k_htc_config(struct ieee80211_hw *hw, u32 changed)
 			ath9k_htc_remove_monitor_interface(priv);
 	}
 
-	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
+	if ((changed & IEEE80211_CONF_CHANGE_CHANNEL) || chip_reset) {
 		struct ieee80211_channel *curchan = hw->conf.channel;
 		int pos = curchan->hw_value;
 
@@ -1223,8 +1224,8 @@ static int ath9k_htc_config(struct ieee80211_hw *hw, u32 changed)
 
 		if (ath9k_htc_set_channel(priv, hw, &priv->ah->channels[pos]) < 0) {
 			ath_err(common, "Unable to set channel\n");
-			mutex_unlock(&priv->mutex);
-			return -EINVAL;
+			ret = -EINVAL;
+			goto out;
 		}
 
 	}
@@ -1246,21 +1247,10 @@ static int ath9k_htc_config(struct ieee80211_hw *hw, u32 changed)
 				       priv->txpowlimit, &priv->curtxpow);
 	}
 
-	if (changed & IEEE80211_CONF_CHANGE_IDLE) {
-		mutex_lock(&priv->htc_pm_lock);
-		if (!priv->ps_idle) {
-			mutex_unlock(&priv->htc_pm_lock);
-			goto out;
-		}
-		mutex_unlock(&priv->htc_pm_lock);
-
-		ath_dbg(common, CONFIG, "idle: disabling radio\n");
-		ath9k_htc_radio_disable(hw);
-	}
-
 out:
+	ath9k_htc_ps_restore(priv);
 	mutex_unlock(&priv->mutex);
-	return 0;
+	return ret;
 }
 
 #define SUPPORTED_FILTERS			\
-- 
cgit v1.1


From d2bb2b9e9161d221badafae063d0c62b41bf3078 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Mon, 25 Jun 2012 22:12:20 +0200
Subject: bcma: define some additional cores IDs
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Some of them are BCM4706 specific AFAWK. Most of them was confirmed on
Netgear WNDR450.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/bcma/scan.c       | 6 ++++++
 include/linux/bcma/bcma.h | 7 +++++++
 2 files changed, 13 insertions(+)

diff --git a/drivers/bcma/scan.c b/drivers/bcma/scan.c
index 5ed0718..a342058 100644
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
@@ -28,6 +28,12 @@ static const struct bcma_device_id_name bcma_arm_device_names[] = {
 
 static const struct bcma_device_id_name bcma_bcm_device_names[] = {
 	{ BCMA_CORE_OOB_ROUTER, "OOB Router" },
+	{ BCMA_CORE_4706_CHIPCOMMON, "BCM4706 ChipCommon" },
+	{ BCMA_CORE_4706_SOC_RAM, "BCM4706 SOC RAM" },
+	{ BCMA_CORE_4706_MAC_GBIT, "BCM4706 GBit MAC" },
+	{ BCMA_CORE_AMEMC, "AMEMC (DDR)" },
+	{ BCMA_CORE_ALTA, "ALTA (I2S)" },
+	{ BCMA_CORE_4706_MAC_GBIT_COMMON, "BCM4706 GBit MAC Common" },
 	{ BCMA_CORE_INVALID, "Invalid" },
 	{ BCMA_CORE_CHIPCOMMON, "ChipCommon" },
 	{ BCMA_CORE_ILINE20, "ILine 20" },
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
index 8deaf6d..12334f9 100644
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -70,6 +70,13 @@ struct bcma_host_ops {
 
 /* Core-ID values. */
 #define BCMA_CORE_OOB_ROUTER		0x367	/* Out of band */
+#define BCMA_CORE_4706_CHIPCOMMON	0x500
+#define BCMA_CORE_4706_SOC_RAM		0x50E
+#define BCMA_CORE_4706_MAC_GBIT		0x52D
+#define BCMA_CORE_AMEMC			0x52E	/* DDR1/2 memory controller core */
+#define BCMA_CORE_ALTA			0x534	/* I2S core */
+#define BCMA_CORE_4706_MAC_GBIT_COMMON	0x5DC
+#define BCMA_CORE_DDR23_PHY		0x5DD
 #define BCMA_CORE_INVALID		0x700
 #define BCMA_CORE_CHIPCOMMON		0x800
 #define BCMA_CORE_ILINE20		0x801
-- 
cgit v1.1


From 135e4c6184d29f0834078bf150009a77b9dae717 Mon Sep 17 00:00:00 2001
From: Franky Lin <frankyl@broadcom.com>
Date: Tue, 26 Jun 2012 21:26:34 +0200
Subject: brcmfmac: add support for bus specific data command

brcmfmac need to support data command setting for dongle's bus
core. A list must be placed at brcmf_bus structure before calling
brcmf_bus_start in order to be sent by brcmf_c_preinit_dcmds.

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h    |  8 ++++++++
 drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c | 16 ++++++++++++++++
 drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c  |  2 ++
 3 files changed, 26 insertions(+)

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
index 3669164..537f499 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
@@ -36,6 +36,13 @@ struct dngl_stats {
 	unsigned long multicast;	/* multicast packets received */
 };
 
+struct brcmf_bus_dcmd {
+	char *name;
+	char *param;
+	int param_len;
+	struct list_head list;
+};
+
 /* interface structure between common and bus layer */
 struct brcmf_bus {
 	u8 type;		/* bus type */
@@ -50,6 +57,7 @@ struct brcmf_bus {
 	unsigned long tx_realloc;	/* Tx packets realloced for headroom */
 	struct dngl_stats dstats;	/* Stats for dongle-based data */
 	u8 align;		/* bus alignment requirement */
+	struct list_head dcmd_list;
 
 	/* interface functions pointers */
 	/* Stop bus module: clear pending frames, disable data flow */
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c
index 236cb9f..1c9eb189 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c
@@ -807,6 +807,8 @@ int brcmf_c_preinit_dcmds(struct brcmf_pub *drvr)
 	int scan_assoc_time = 40;
 	int scan_unassoc_time = 40;
 	int i;
+	struct brcmf_bus_dcmd *cmdlst;
+	struct list_head *cur, *q;
 
 	mutex_lock(&drvr->proto_block);
 
@@ -874,6 +876,20 @@ int brcmf_c_preinit_dcmds(struct brcmf_pub *drvr)
 						 0, true);
 	}
 
+	/* set bus specific command if there is any */
+	list_for_each_safe(cur, q, &drvr->bus_if->dcmd_list) {
+		cmdlst = list_entry(cur, struct brcmf_bus_dcmd, list);
+		if (cmdlst->name && cmdlst->param && cmdlst->param_len) {
+			brcmf_c_mkiovar(cmdlst->name, cmdlst->param,
+					cmdlst->param_len, iovbuf,
+					sizeof(iovbuf));
+			brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_VAR,
+						 iovbuf, sizeof(iovbuf));
+		}
+		list_del(cur);
+		kfree(cmdlst);
+	}
+
 	mutex_unlock(&drvr->proto_block);
 
 	return 0;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
index 01cf6c0..57bf1d7 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
@@ -1020,6 +1020,8 @@ int brcmf_attach(uint bus_hdrlen, struct device *dev)
 	INIT_WORK(&drvr->setmacaddr_work, _brcmf_set_mac_address);
 	INIT_WORK(&drvr->multicast_work, _brcmf_set_multicast_list);
 
+	INIT_LIST_HEAD(&drvr->bus_if->dcmd_list);
+
 	return ret;
 
 fail:
-- 
cgit v1.1


From bbfd6a66ff69e3e1850bead3e30031e303581cb1 Mon Sep 17 00:00:00 2001
From: Franky Lin <frankyl@broadcom.com>
Date: Tue, 26 Jun 2012 21:26:35 +0200
Subject: brcmfmac: restrict dongle txglom disable to old SDIO core

txglomming is a firmware feature for sdio bus interface. For SDIO
device cores newer than revision 11, the default setting of
firmware should be used instead of disabling it from the host side.

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c |  6 ------
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c   | 15 +++++++++++++++
 2 files changed, 15 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c
index 1c9eb189..40fa472 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c
@@ -801,7 +801,6 @@ int brcmf_c_preinit_dcmds(struct brcmf_pub *drvr)
 				 "event_msgs" + '\0' + bitvec  */
 	char buf[128], *ptr;
 	u32 dongle_align = drvr->bus_if->align;
-	u32 glom = 0;
 	u32 roaming = 1;
 	uint bcn_timeout = 3;
 	int scan_assoc_time = 40;
@@ -835,11 +834,6 @@ int brcmf_c_preinit_dcmds(struct brcmf_pub *drvr)
 	brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_VAR, iovbuf,
 				  sizeof(iovbuf));
 
-	/* disable glom option per default */
-	brcmf_c_mkiovar("bus:txglom", (char *)&glom, 4, iovbuf, sizeof(iovbuf));
-	brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_VAR, iovbuf,
-				  sizeof(iovbuf));
-
 	/* Setup timeout if Beacons are lost and roam is off to report
 		 link down */
 	brcmf_c_mkiovar("bcn_timeout", (char *)&bcn_timeout, 4, iovbuf,
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 076b772..1616c14 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -4169,6 +4169,9 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev)
 {
 	int ret;
 	struct brcmf_sdio *bus;
+	struct brcmf_bus_dcmd *dlst;
+	u32 dngl_txglom;
+	u8 idx;
 
 	brcmf_dbg(TRACE, "Enter\n");
 
@@ -4254,6 +4257,18 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev)
 	brcmf_sdio_debugfs_create(bus);
 	brcmf_dbg(INFO, "completed!!\n");
 
+	/* sdio bus core specific dcmd */
+	idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
+	dlst = kzalloc(sizeof(struct brcmf_bus_dcmd), GFP_KERNEL);
+	if (bus->ci->c_inf[idx].rev < 12 && dlst) {
+		/* for sdio core rev < 12, disable txgloming */
+		dngl_txglom = 0;
+		dlst->name = "bus:txglom";
+		dlst->param = (char *)&dngl_txglom;
+		dlst->param_len = sizeof(u32);
+		list_add(&dlst->list, &bus->sdiodev->bus_if->dcmd_list);
+	}
+
 	/* if firmware path present try to download and bring up bus */
 	ret = brcmf_bus_start(bus->sdiodev->dev);
 	if (ret != 0) {
-- 
cgit v1.1


From c3d2bc35e53dc0dcb85f4f4f06486ecd99143615 Mon Sep 17 00:00:00 2001
From: Franky Lin <frankyl@broadcom.com>
Date: Tue, 26 Jun 2012 21:26:36 +0200
Subject: brcmfmac: move glom alignment setting to SDIO bus layer

txglomming alignment is a SDIO bus specific feature. It is more
appropriate to place it in SDIO bus layer instead of common layer.

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 .../net/wireless/brcm80211/brcmfmac/dhd_common.c    |  7 -------
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c  | 21 +++++++++++++++------
 2 files changed, 15 insertions(+), 13 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c
index 40fa472..2621dd3 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c
@@ -800,7 +800,6 @@ int brcmf_c_preinit_dcmds(struct brcmf_pub *drvr)
 	char iovbuf[BRCMF_EVENTING_MASK_LEN + 12];	/*  Room for
 				 "event_msgs" + '\0' + bitvec  */
 	char buf[128], *ptr;
-	u32 dongle_align = drvr->bus_if->align;
 	u32 roaming = 1;
 	uint bcn_timeout = 3;
 	int scan_assoc_time = 40;
@@ -828,12 +827,6 @@ int brcmf_c_preinit_dcmds(struct brcmf_pub *drvr)
 	/* Print fw version info */
 	brcmf_dbg(ERROR, "Firmware version = %s\n", buf);
 
-	/* Match Host and Dongle rx alignment */
-	brcmf_c_mkiovar("bus:txglomalign", (char *)&dongle_align, 4, iovbuf,
-		    sizeof(iovbuf));
-	brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_VAR, iovbuf,
-				  sizeof(iovbuf));
-
 	/* Setup timeout if Beacons are lost and roam is off to report
 		 link down */
 	brcmf_c_mkiovar("bcn_timeout", (char *)&bcn_timeout, 4, iovbuf,
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 1616c14..581e7d9 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -4171,6 +4171,7 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev)
 	struct brcmf_sdio *bus;
 	struct brcmf_bus_dcmd *dlst;
 	u32 dngl_txglom;
+	u32 dngl_txglomalign;
 	u8 idx;
 
 	brcmf_dbg(TRACE, "Enter\n");
@@ -4260,12 +4261,20 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev)
 	/* sdio bus core specific dcmd */
 	idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
 	dlst = kzalloc(sizeof(struct brcmf_bus_dcmd), GFP_KERNEL);
-	if (bus->ci->c_inf[idx].rev < 12 && dlst) {
-		/* for sdio core rev < 12, disable txgloming */
-		dngl_txglom = 0;
-		dlst->name = "bus:txglom";
-		dlst->param = (char *)&dngl_txglom;
-		dlst->param_len = sizeof(u32);
+	if (dlst) {
+		if (bus->ci->c_inf[idx].rev < 12) {
+			/* for sdio core rev < 12, disable txgloming */
+			dngl_txglom = 0;
+			dlst->name = "bus:txglom";
+			dlst->param = (char *)&dngl_txglom;
+			dlst->param_len = sizeof(u32);
+		} else {
+			/* otherwise, set txglomalign */
+			dngl_txglomalign = bus->sdiodev->bus_if->align;
+			dlst->name = "bus:txglomalign";
+			dlst->param = (char *)&dngl_txglomalign;
+			dlst->param_len = sizeof(u32);
+		}
 		list_add(&dlst->list, &bus->sdiodev->bus_if->dcmd_list);
 	}
 
-- 
cgit v1.1


From d610cde30b009ac3dbcd1ae5d7d55fa4c7d066fa Mon Sep 17 00:00:00 2001
From: Franky Lin <frankyl@broadcom.com>
Date: Tue, 26 Jun 2012 21:26:37 +0200
Subject: brcmfmac: use firmware data buffer directly for nvram

The nvram file could be parsed directly in the data buffer in the
firmware structure passed by request_firmware function. This patch
gets rid of the redundant memcpy.

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 97 +++++++---------------
 1 file changed, 30 insertions(+), 67 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 581e7d9..a50796c 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -3336,39 +3336,6 @@ brcmf_sdbrcm_bus_rxctl(struct device *dev, unsigned char *msg, uint msglen)
 	return rxlen ? (int)rxlen : -ETIMEDOUT;
 }
 
-static int brcmf_sdbrcm_downloadvars(struct brcmf_sdio *bus, void *arg, int len)
-{
-	int bcmerror = 0;
-
-	brcmf_dbg(TRACE, "Enter\n");
-
-	/* Basic sanity checks */
-	if (bus->sdiodev->bus_if->drvr_up) {
-		bcmerror = -EISCONN;
-		goto err;
-	}
-	if (!len) {
-		bcmerror = -EOVERFLOW;
-		goto err;
-	}
-
-	/* Free the old ones and replace with passed variables */
-	kfree(bus->vars);
-
-	bus->vars = kmalloc(len, GFP_ATOMIC);
-	bus->varsz = bus->vars ? len : 0;
-	if (bus->vars == NULL) {
-		bcmerror = -ENOMEM;
-		goto err;
-	}
-
-	/* Copy the passed variables, which should include the
-		 terminating double-null */
-	memcpy(bus->vars, arg, bus->varsz);
-err:
-	return bcmerror;
-}
-
 static int brcmf_sdbrcm_write_vars(struct brcmf_sdio *bus)
 {
 	int bcmerror = 0;
@@ -3573,13 +3540,21 @@ err:
  * by two NULs.
 */
 
-static uint brcmf_process_nvram_vars(char *varbuf, uint len)
+static int brcmf_process_nvram_vars(struct brcmf_sdio *bus)
 {
+	char *varbuf;
 	char *dp;
 	bool findNewline;
 	int column;
-	uint buf_len, n;
+	int ret = 0;
+	uint buf_len, n, len;
+
+	len = bus->firmware->size;
+	varbuf = vmalloc(len);
+	if (!varbuf)
+		return -ENOMEM;
 
+	memcpy(varbuf, bus->firmware->data, len);
 	dp = varbuf;
 
 	findNewline = false;
@@ -3608,56 +3583,44 @@ static uint brcmf_process_nvram_vars(char *varbuf, uint len)
 		column++;
 	}
 	buf_len = dp - varbuf;
-
 	while (dp < varbuf + n)
 		*dp++ = 0;
 
-	return buf_len;
+	kfree(bus->vars);
+
+	bus->varsz = buf_len + 1;
+	bus->vars = kmalloc(bus->varsz, GFP_KERNEL);
+	if (bus->vars == NULL) {
+		bus->varsz = 0;
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	/* copy the processed variables and add null termination */
+	memcpy(bus->vars, varbuf, buf_len);
+	bus->vars[buf_len] = 0;
+err:
+	vfree(varbuf);
+	return ret;
 }
 
 static int brcmf_sdbrcm_download_nvram(struct brcmf_sdio *bus)
 {
-	uint len;
-	char *memblock = NULL;
-	char *bufp;
 	int ret;
 
+	if (bus->sdiodev->bus_if->drvr_up)
+		return -EISCONN;
+
 	ret = request_firmware(&bus->firmware, BRCMF_SDIO_NV_NAME,
 			       &bus->sdiodev->func[2]->dev);
 	if (ret) {
 		brcmf_dbg(ERROR, "Fail to request nvram %d\n", ret);
 		return ret;
 	}
-	bus->fw_ptr = 0;
-
-	memblock = kmalloc(MEMBLOCK, GFP_ATOMIC);
-	if (memblock == NULL) {
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	len = brcmf_sdbrcm_get_image(memblock, MEMBLOCK, bus);
-
-	if (len > 0 && len < MEMBLOCK) {
-		bufp = (char *)memblock;
-		bufp[len] = 0;
-		len = brcmf_process_nvram_vars(bufp, len);
-		bufp += len;
-		*bufp++ = 0;
-		if (len)
-			ret = brcmf_sdbrcm_downloadvars(bus, memblock, len + 1);
-		if (ret)
-			brcmf_dbg(ERROR, "error downloading vars: %d\n", ret);
-	} else {
-		brcmf_dbg(ERROR, "error reading nvram file: %d\n", len);
-		ret = -EIO;
-	}
 
-err:
-	kfree(memblock);
+	ret = brcmf_process_nvram_vars(bus);
 
 	release_firmware(bus->firmware);
-	bus->fw_ptr = 0;
 
 	return ret;
 }
-- 
cgit v1.1


From 6d4ef68086f54713b6c9dda478b8e3f749acb3ba Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Tue, 26 Jun 2012 21:26:38 +0200
Subject: brcmfmac: reduce allocations needed during nvram data download

The nvram data is preprocessed before being sent to the device
and just before sending an additional allocation was done that
assured word alignment of the data. This has moved to the
preprocessing step to reduce allocations and subsequent copying
of the nvram data.

Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 48 ++++++++--------------
 1 file changed, 17 insertions(+), 31 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index a50796c..2ee19c1 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -3339,9 +3339,7 @@ brcmf_sdbrcm_bus_rxctl(struct device *dev, unsigned char *msg, uint msglen)
 static int brcmf_sdbrcm_write_vars(struct brcmf_sdio *bus)
 {
 	int bcmerror = 0;
-	u32 varsize;
 	u32 varaddr;
-	u8 *vbuffer;
 	u32 varsizew;
 	__le32 varsizew_le;
 #ifdef DEBUG
@@ -3350,56 +3348,44 @@ static int brcmf_sdbrcm_write_vars(struct brcmf_sdio *bus)
 
 	/* Even if there are no vars are to be written, we still
 		 need to set the ramsize. */
-	varsize = bus->varsz ? roundup(bus->varsz, 4) : 0;
-	varaddr = (bus->ramsize - 4) - varsize;
+	varaddr = (bus->ramsize - 4) - bus->varsz;
 
 	if (bus->vars) {
-		vbuffer = kzalloc(varsize, GFP_ATOMIC);
-		if (!vbuffer)
-			return -ENOMEM;
-
-		memcpy(vbuffer, bus->vars, bus->varsz);
-
 		/* Write the vars list */
-		bcmerror =
-		    brcmf_sdbrcm_membytes(bus, true, varaddr, vbuffer, varsize);
+		bcmerror = brcmf_sdbrcm_membytes(bus, true, varaddr,
+						 bus->vars, bus->varsz);
 #ifdef DEBUG
 		/* Verify NVRAM bytes */
-		brcmf_dbg(INFO, "Compare NVRAM dl & ul; varsize=%d\n", varsize);
-		nvram_ularray = kmalloc(varsize, GFP_ATOMIC);
-		if (!nvram_ularray) {
-			kfree(vbuffer);
+		brcmf_dbg(INFO, "Compare NVRAM dl & ul; varsize=%d\n",
+			  bus->varsz);
+		nvram_ularray = kmalloc(bus->varsz, GFP_ATOMIC);
+		if (!nvram_ularray)
 			return -ENOMEM;
-		}
 
 		/* Upload image to verify downloaded contents. */
-		memset(nvram_ularray, 0xaa, varsize);
+		memset(nvram_ularray, 0xaa, bus->varsz);
 
 		/* Read the vars list to temp buffer for comparison */
-		bcmerror =
-		    brcmf_sdbrcm_membytes(bus, false, varaddr, nvram_ularray,
-				     varsize);
+		bcmerror = brcmf_sdbrcm_membytes(bus, false, varaddr,
+						 nvram_ularray, bus->varsz);
 		if (bcmerror) {
 			brcmf_dbg(ERROR, "error %d on reading %d nvram bytes at 0x%08x\n",
-				  bcmerror, varsize, varaddr);
+				  bcmerror, bus->varsz, varaddr);
 		}
 		/* Compare the org NVRAM with the one read from RAM */
-		if (memcmp(vbuffer, nvram_ularray, varsize))
+		if (memcmp(bus->vars, nvram_ularray, bus->varsz))
 			brcmf_dbg(ERROR, "Downloaded NVRAM image is corrupted\n");
 		else
 			brcmf_dbg(ERROR, "Download/Upload/Compare of NVRAM ok\n");
 
 		kfree(nvram_ularray);
 #endif				/* DEBUG */
-
-		kfree(vbuffer);
 	}
 
 	/* adjust to the user specified RAM */
 	brcmf_dbg(INFO, "Physical memory size: %d\n", bus->ramsize);
 	brcmf_dbg(INFO, "Vars are at %d, orig varsize is %d\n",
-		  varaddr, varsize);
-	varsize = ((bus->ramsize - 4) - varaddr);
+		  varaddr, bus->varsz);
 
 	/*
 	 * Determine the length token:
@@ -3410,13 +3396,13 @@ static int brcmf_sdbrcm_write_vars(struct brcmf_sdio *bus)
 		varsizew = 0;
 		varsizew_le = cpu_to_le32(0);
 	} else {
-		varsizew = varsize / 4;
+		varsizew = bus->varsz / 4;
 		varsizew = (~varsizew << 16) | (varsizew & 0x0000FFFF);
 		varsizew_le = cpu_to_le32(varsizew);
 	}
 
 	brcmf_dbg(INFO, "New varsize is %d, length token=0x%08x\n",
-		  varsize, varsizew);
+		  bus->varsz, varsizew);
 
 	/* Write the length token to the last word */
 	bcmerror = brcmf_sdbrcm_membytes(bus, true, (bus->ramsize - 4),
@@ -3587,8 +3573,8 @@ static int brcmf_process_nvram_vars(struct brcmf_sdio *bus)
 		*dp++ = 0;
 
 	kfree(bus->vars);
-
-	bus->varsz = buf_len + 1;
+	/* roundup needed for download to device */
+	bus->varsz = roundup(buf_len + 1, 4);
 	bus->vars = kmalloc(bus->varsz, GFP_KERNEL);
 	if (bus->vars == NULL) {
 		bus->varsz = 0;
-- 
cgit v1.1


From 85a4a1c3bc42e7ab7027f94984be04e41a7cc496 Mon Sep 17 00:00:00 2001
From: Franky Lin <frankyl@broadcom.com>
Date: Tue, 26 Jun 2012 21:26:39 +0200
Subject: brcmfmac: add BCM4334 support

BCM4334 is a dualband a/b/g/n WiFi chip support 20MHz/40MHz
channels. This patch adds support for its SDIO interface.

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c |  2 ++
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c     |  2 ++
 drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c    | 17 +++++++++++++++++
 drivers/net/wireless/brcm80211/include/brcm_hw_ids.h   |  1 +
 4 files changed, 22 insertions(+)

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c
index 82f51db..49765d3 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c
@@ -44,6 +44,7 @@
 
 #define SDIO_DEVICE_ID_BROADCOM_4329	0x4329
 #define SDIO_DEVICE_ID_BROADCOM_4330	0x4330
+#define SDIO_DEVICE_ID_BROADCOM_4334	0x4334
 
 #define SDIO_FUNC1_BLOCKSIZE		64
 #define SDIO_FUNC2_BLOCKSIZE		512
@@ -52,6 +53,7 @@
 static const struct sdio_device_id brcmf_sdmmc_ids[] = {
 	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4329)},
 	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4330)},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4334)},
 	{ /* end: all zeroes */ },
 };
 MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids);
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 2ee19c1..5c5f1cd 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -3885,6 +3885,8 @@ static bool brcmf_sdbrcm_chipmatch(u16 chipid)
 		return true;
 	if (chipid == BCM4330_CHIP_ID)
 		return true;
+	if (chipid == BCM4334_CHIP_ID)
+		return true;
 	return false;
 }
 
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
index f8e1f1c..58155e2 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
@@ -403,6 +403,23 @@ static int brcmf_sdio_chip_recognition(struct brcmf_sdio_dev *sdiodev,
 		ci->c_inf[3].cib = 0x03004211;
 		ci->ramsize = 0x48000;
 		break;
+	case BCM4334_CHIP_ID:
+		ci->c_inf[0].wrapbase = 0x18100000;
+		ci->c_inf[0].cib = 0x29004211;
+		ci->c_inf[1].id = BCMA_CORE_SDIO_DEV;
+		ci->c_inf[1].base = 0x18002000;
+		ci->c_inf[1].wrapbase = 0x18102000;
+		ci->c_inf[1].cib = 0x0d004211;
+		ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM;
+		ci->c_inf[2].base = 0x18004000;
+		ci->c_inf[2].wrapbase = 0x18104000;
+		ci->c_inf[2].cib = 0x13080401;
+		ci->c_inf[3].id = BCMA_CORE_ARM_CM3;
+		ci->c_inf[3].base = 0x18003000;
+		ci->c_inf[3].wrapbase = 0x18103000;
+		ci->c_inf[3].cib = 0x07004211;
+		ci->ramsize = 0x80000;
+		break;
 	default:
 		brcmf_dbg(ERROR, "chipid 0x%x is not supported\n", ci->chip);
 		return -ENODEV;
diff --git a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
index 333193f..bcc79b4 100644
--- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
@@ -37,5 +37,6 @@
 #define BCM4329_CHIP_ID		0x4329
 #define BCM4330_CHIP_ID		0x4330
 #define BCM4331_CHIP_ID		0x4331
+#define BCM4334_CHIP_ID		0x4334
 
 #endif				/* _BRCM_HW_IDS_H_ */
-- 
cgit v1.1


From 9bd02c6b9e6219829929111c46ef007c7a76865f Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Tue, 26 Jun 2012 21:26:40 +0200
Subject: brcmfmac: fix sparse warning introduced with checkdied patch

The commit "brcmfmac: introduce checkdied debugfs functionality"
also introduced a sparse warning:

..../brcmfmac/dhd_sdio.c:3147:45: sparse: cast to restricted __le32

This patch fixes this sparse warning.

Reported-by: Fengguang Wu <wfg@linux.intel.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 5c5f1cd..5c868ba 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -3145,7 +3145,7 @@ static int brcmf_sdio_trap_info(struct brcmf_sdio *bus, struct sdpcm_shared *sh,
 			le32_to_cpu(tr.type), le32_to_cpu(tr.epc),
 			le32_to_cpu(tr.cpsr), le32_to_cpu(tr.spsr),
 			le32_to_cpu(tr.r13), le32_to_cpu(tr.r14),
-			le32_to_cpu(tr.pc), le32_to_cpu(sh->trap_addr),
+			le32_to_cpu(tr.pc), sh->trap_addr,
 			le32_to_cpu(tr.r0), le32_to_cpu(tr.r1),
 			le32_to_cpu(tr.r2), le32_to_cpu(tr.r3),
 			le32_to_cpu(tr.r4), le32_to_cpu(tr.r5),
-- 
cgit v1.1


From bf52592fe4901f486a5266fd73e4ee80205b18b4 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Wed, 27 Jun 2012 14:15:59 +0530
Subject: ath9k: Fix compilation breakage

Wrap the MCI-work canceling with CONFIG_ATH9K_BTCOEX_SUPPORT.

Reported-by: Emmanuel Benisty <benisty.e@gmail.com>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index c14cf5a..e4e73f0 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -151,8 +151,10 @@ static void __ath_cancel_work(struct ath_softc *sc)
 	cancel_delayed_work_sync(&sc->tx_complete_work);
 	cancel_delayed_work_sync(&sc->hw_pll_work);
 
+#ifdef CONFIG_ATH9K_BTCOEX_SUPPORT
 	if (ath9k_hw_mci_is_enabled(sc->sc_ah))
 		cancel_work_sync(&sc->mci_work);
+#endif
 }
 
 static void ath_cancel_work(struct ath_softc *sc)
-- 
cgit v1.1


From 26b6da6b7829dc7cf5d21e854564be90c7928323 Mon Sep 17 00:00:00 2001
From: Paul Bolle <pebolle@tiscali.nl>
Date: Wed, 27 Jun 2012 10:36:27 +0200
Subject: iwlegacy: print how long queue was actually stuck

Every now and then, after resuming from suspend, the iwlegacy driver
prints
    iwl4965 0000:03:00.0: Queue 2 stuck for 2000 ms.
    iwl4965 0000:03:00.0: On demand firmware reload

I have no idea what causes these errors. But the code currently uses
wd_timeout in the first error. wd_timeout will generally be set at
IL_DEF_WD_TIMEOUT (ie, 2000). Perhaps printing for how long the queue
was actually stuck can clarify the cause of these errors.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlegacy/common.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/iwlegacy/common.c b/drivers/net/wireless/iwlegacy/common.c
index cbf2dc1..763c752 100644
--- a/drivers/net/wireless/iwlegacy/common.c
+++ b/drivers/net/wireless/iwlegacy/common.c
@@ -4717,10 +4717,11 @@ il_check_stuck_queue(struct il_priv *il, int cnt)
 	struct il_tx_queue *txq = &il->txq[cnt];
 	struct il_queue *q = &txq->q;
 	unsigned long timeout;
+	unsigned long now = jiffies;
 	int ret;
 
 	if (q->read_ptr == q->write_ptr) {
-		txq->time_stamp = jiffies;
+		txq->time_stamp = now;
 		return 0;
 	}
 
@@ -4728,9 +4729,9 @@ il_check_stuck_queue(struct il_priv *il, int cnt)
 	    txq->time_stamp +
 	    msecs_to_jiffies(il->cfg->wd_timeout);
 
-	if (time_after(jiffies, timeout)) {
+	if (time_after(now, timeout)) {
 		IL_ERR("Queue %d stuck for %u ms.\n", q->id,
-		       il->cfg->wd_timeout);
+		       jiffies_to_msecs(now - txq->time_stamp));
 		ret = il_force_reset(il, false);
 		return (ret == -EAGAIN) ? 0 : 1;
 	}
-- 
cgit v1.1


From 73dc3eb8b93eda8101dcd6c0b2a0db00f4bc74fd Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Wed, 27 Jun 2012 14:58:19 +0200
Subject: ath9k: fix ANI operation in AP mode

ath9k_ani_reset (which is called at reset time) uses a state variable
ani->update_ani to prevent the ANI noise immunity state on the operating
channel from being overwritten by background scans. Unfortunately this
is also being set for AP mode, since it's mixed with code that is only
supposed to change the default settings after a reset.

In AP mode this has the side effect of having ANI run, but being unable to
change its runtime noise immunity level, making it effectively useless.

Fix this by getting rid of ani->update_ani and passing a parameter to
ath9k_hw_set_ofdm_nil and ath9k_hw_set_cck_nil instead.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ani.c | 29 +++++++++++++++--------------
 drivers/net/wireless/ath/ath9k/ani.h |  1 -
 2 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index 7ebc3465..ff007f5 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -140,7 +140,8 @@ static void ath9k_ani_restart(struct ath_hw *ah)
 }
 
 /* Adjust the OFDM Noise Immunity Level */
-static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel)
+static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel,
+				  bool scan)
 {
 	struct ar5416AniState *aniState = &ah->curchan->ani;
 	struct ath_common *common = ath9k_hw_common(ah);
@@ -153,7 +154,7 @@ static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel)
 		immunityLevel, BEACON_RSSI(ah),
 		aniState->rssiThrLow, aniState->rssiThrHigh);
 
-	if (aniState->update_ani)
+	if (!scan)
 		aniState->ofdmNoiseImmunityLevel = immunityLevel;
 
 	entry_ofdm = &ofdm_level_table[aniState->ofdmNoiseImmunityLevel];
@@ -199,13 +200,14 @@ static void ath9k_hw_ani_ofdm_err_trigger(struct ath_hw *ah)
 	aniState = &ah->curchan->ani;
 
 	if (aniState->ofdmNoiseImmunityLevel < ATH9K_ANI_OFDM_MAX_LEVEL)
-		ath9k_hw_set_ofdm_nil(ah, aniState->ofdmNoiseImmunityLevel + 1);
+		ath9k_hw_set_ofdm_nil(ah, aniState->ofdmNoiseImmunityLevel + 1, false);
 }
 
 /*
  * Set the ANI settings to match an CCK level.
  */
-static void ath9k_hw_set_cck_nil(struct ath_hw *ah, u_int8_t immunityLevel)
+static void ath9k_hw_set_cck_nil(struct ath_hw *ah, u_int8_t immunityLevel,
+				 bool scan)
 {
 	struct ar5416AniState *aniState = &ah->curchan->ani;
 	struct ath_common *common = ath9k_hw_common(ah);
@@ -222,7 +224,7 @@ static void ath9k_hw_set_cck_nil(struct ath_hw *ah, u_int8_t immunityLevel)
 	    immunityLevel > ATH9K_ANI_CCK_MAX_LEVEL_LOW_RSSI)
 		immunityLevel = ATH9K_ANI_CCK_MAX_LEVEL_LOW_RSSI;
 
-	if (aniState->update_ani)
+	if (!scan)
 		aniState->cckNoiseImmunityLevel = immunityLevel;
 
 	entry_ofdm = &ofdm_level_table[aniState->ofdmNoiseImmunityLevel];
@@ -254,7 +256,8 @@ static void ath9k_hw_ani_cck_err_trigger(struct ath_hw *ah)
 	aniState = &ah->curchan->ani;
 
 	if (aniState->cckNoiseImmunityLevel < ATH9K_ANI_CCK_MAX_LEVEL)
-		ath9k_hw_set_cck_nil(ah, aniState->cckNoiseImmunityLevel + 1);
+		ath9k_hw_set_cck_nil(ah, aniState->cckNoiseImmunityLevel + 1,
+				     false);
 }
 
 /*
@@ -270,13 +273,15 @@ static void ath9k_hw_ani_lower_immunity(struct ath_hw *ah)
 	/* lower OFDM noise immunity */
 	if (aniState->ofdmNoiseImmunityLevel > 0 &&
 	    (aniState->ofdmsTurn || aniState->cckNoiseImmunityLevel == 0)) {
-		ath9k_hw_set_ofdm_nil(ah, aniState->ofdmNoiseImmunityLevel - 1);
+		ath9k_hw_set_ofdm_nil(ah, aniState->ofdmNoiseImmunityLevel - 1,
+				      false);
 		return;
 	}
 
 	/* lower CCK noise immunity */
 	if (aniState->cckNoiseImmunityLevel > 0)
-		ath9k_hw_set_cck_nil(ah, aniState->cckNoiseImmunityLevel - 1);
+		ath9k_hw_set_cck_nil(ah, aniState->cckNoiseImmunityLevel - 1,
+				     false);
 }
 
 /*
@@ -338,7 +343,6 @@ void ath9k_ani_reset(struct ath_hw *ah, bool is_scanning)
 				aniState->ofdmNoiseImmunityLevel,
 				aniState->cckNoiseImmunityLevel);
 
-			aniState->update_ani = false;
 			ofdm_nil = ATH9K_ANI_OFDM_DEF_LEVEL;
 			cck_nil = ATH9K_ANI_CCK_DEF_LEVEL;
 		}
@@ -354,11 +358,9 @@ void ath9k_ani_reset(struct ath_hw *ah, bool is_scanning)
 			is_scanning,
 			aniState->ofdmNoiseImmunityLevel,
 			aniState->cckNoiseImmunityLevel);
-
-			aniState->update_ani = true;
 	}
-	ath9k_hw_set_ofdm_nil(ah, ofdm_nil);
-	ath9k_hw_set_cck_nil(ah, cck_nil);
+	ath9k_hw_set_ofdm_nil(ah, ofdm_nil, is_scanning);
+	ath9k_hw_set_cck_nil(ah, cck_nil, is_scanning);
 
 	/*
 	 * enable phy counters if hw supports or if not, enable phy
@@ -534,7 +536,6 @@ void ath9k_hw_ani_init(struct ath_hw *ah)
 		ani->ofdmWeakSigDetect = ATH9K_ANI_USE_OFDM_WEAK_SIG;
 		ani->cckNoiseImmunityLevel = ATH9K_ANI_CCK_DEF_LEVEL;
 		ani->ofdmNoiseImmunityLevel = ATH9K_ANI_OFDM_DEF_LEVEL;
-		ani->update_ani = false;
 	}
 
 	/*
diff --git a/drivers/net/wireless/ath/ath9k/ani.h b/drivers/net/wireless/ath/ath9k/ani.h
index e9d841b..1485bf5 100644
--- a/drivers/net/wireless/ath/ath9k/ani.h
+++ b/drivers/net/wireless/ath/ath9k/ani.h
@@ -114,7 +114,6 @@ struct ar5416AniState {
 	u8 firstepLevel;
 	u8 ofdmWeakSigDetect;
 	u8 cckWeakSigThreshold;
-	bool update_ani;
 	u32 listenTime;
 	int32_t rssiThrLow;
 	int32_t rssiThrHigh;
-- 
cgit v1.1


From 812944891c598300afcc5628905d775019f25310 Mon Sep 17 00:00:00 2001
From: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Date: Wed, 27 Jun 2012 20:00:26 +0530
Subject: ath9k_hw: make use of the wrapper to check for MCI init

ath9k_hw_mci_is_enabled wrapper also takes care of
ATH9K_HW_CAP_MCI being set for the AR9462 under test.

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/gpio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/gpio.c b/drivers/net/wireless/ath/ath9k/gpio.c
index 26032cb..9ae6a4d 100644
--- a/drivers/net/wireless/ath/ath9k/gpio.c
+++ b/drivers/net/wireless/ath/ath9k/gpio.c
@@ -416,7 +416,7 @@ int ath9k_init_btcoex(struct ath_softc *sc)
 		txq = sc->tx.txq_map[WME_AC_BE];
 		ath9k_hw_init_btcoex_hw(sc->sc_ah, txq->axq_qnum);
 		sc->btcoex.bt_stomp_type = ATH_BTCOEX_STOMP_LOW;
-		if (AR_SREV_9462(ah)) {
+		if (ath9k_hw_mci_is_enabled(ah)) {
 			sc->btcoex.duty_cycle = ATH_BTCOEX_DEF_DUTY_CYCLE;
 			INIT_LIST_HEAD(&sc->btcoex.mci.info);
 
-- 
cgit v1.1


From d8fffb4a9e13d1130b4fd0e577973704cad79f40 Mon Sep 17 00:00:00 2001
From: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Date: Wed, 27 Jun 2012 20:00:27 +0530
Subject: ath9k: Fix signedness in a MCI debug message

seems i got a message like this
ath: phy0: BT_Status_Update: is_link=0, linkId=2,
state=1, SEQ=-2085766476 initially.

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/mci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/mci.c b/drivers/net/wireless/ath/ath9k/mci.c
index c40e568..64cc782 100644
--- a/drivers/net/wireless/ath/ath9k/mci.c
+++ b/drivers/net/wireless/ath/ath9k/mci.c
@@ -348,7 +348,7 @@ static void ath_mci_msg(struct ath_softc *sc, u8 opcode, u8 *rx_payload)
 
 		seq_num = *((u32 *)(rx_payload + 12));
 		ath_dbg(common, MCI,
-			"BT_Status_Update: is_link=%d, linkId=%d, state=%d, SEQ=%d\n",
+			"BT_Status_Update: is_link=%d, linkId=%d, state=%d, SEQ=%u\n",
 			profile_status.is_link, profile_status.conn_handle,
 			profile_status.is_critical, seq_num);
 
-- 
cgit v1.1


From 589ebd85268293e64ff6b7e0dd4ed8fb26811aa7 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Thu, 28 Jun 2012 02:33:40 +0200
Subject: ath9k: update AR934x initvals to latest version

Generated using the initvals tool from the qca-swiss-army-knife repository
from https://github.com/mcgrof/qca-swiss-army-knife

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath/ath9k/ar9340_initvals.h | 475 ++++++++++++++---------
 1 file changed, 290 insertions(+), 185 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9340_initvals.h b/drivers/net/wireless/ath/ath9k/ar9340_initvals.h
index 815a8af..210fd79 100644
--- a/drivers/net/wireless/ath/ath9k/ar9340_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9340_initvals.h
@@ -1,5 +1,6 @@
 /*
- * Copyright (c) 2011 Atheros Communications Inc.
+ * Copyright (c) 2010-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2012 Qualcomm Atheros Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -18,16 +19,16 @@
 #define INITVALS_9340_H
 
 static const u32 ar9340_1p0_radio_postamble[][5] = {
-	/*  Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20  */
+	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
 	{0x000160ac, 0xa4646800, 0xa4646800, 0xa4646800, 0xa4646800},
-	{0x0001610c, 0x08000000, 0x08000000, 0x00000000, 0x00000000},
+	{0x0001610c, 0x08000000, 0x00000000, 0x00000000, 0x00000000},
 	{0x00016140, 0x10804000, 0x10804000, 0x50804000, 0x50804000},
-	{0x0001650c, 0x08000000, 0x08000000, 0x00000000, 0x00000000},
+	{0x0001650c, 0x08000000, 0x00000000, 0x00000000, 0x00000000},
 	{0x00016540, 0x10804000, 0x10804000, 0x50804000, 0x50804000},
 };
 
 static const u32 ar9340Modes_lowest_ob_db_tx_gain_table_1p0[][5] = {
-	/*   Addr     5G_HT20     5G_HT40     2G_HT40     2G_HT20  */
+	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
 	{0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9},
 	{0x0000a500, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
 	{0x0000a504, 0x06000003, 0x06000003, 0x04000002, 0x04000002},
@@ -100,20 +101,20 @@ static const u32 ar9340Modes_lowest_ob_db_tx_gain_table_1p0[][5] = {
 };
 
 static const u32 ar9340Modes_fast_clock_1p0[][3] = {
-	/*  Addr      5G_HT20     5G_HT40  */
+	/* Addr      5G_HT20     5G_HT40   */
 	{0x00001030, 0x00000268, 0x000004d0},
 	{0x00001070, 0x0000018c, 0x00000318},
 	{0x000010b0, 0x00000fd0, 0x00001fa0},
 	{0x00008014, 0x044c044c, 0x08980898},
 	{0x0000801c, 0x148ec02b, 0x148ec057},
 	{0x00008318, 0x000044c0, 0x00008980},
-	{0x00009e00, 0x03721821, 0x03721821},
+	{0x00009e00, 0x0372131c, 0x0372131c},
 	{0x0000a230, 0x0000000b, 0x00000016},
 	{0x0000a254, 0x00000898, 0x00001130},
 };
 
 static const u32 ar9340_1p0_radio_core[][2] = {
-	/*  Addr     allmodes  */
+	/* Addr      allmodes  */
 	{0x00016000, 0x36db6db6},
 	{0x00016004, 0x6db6db40},
 	{0x00016008, 0x73f00000},
@@ -146,15 +147,13 @@ static const u32 ar9340_1p0_radio_core[][2] = {
 	{0x00016100, 0x04cb0001},
 	{0x00016104, 0xfff80000},
 	{0x00016108, 0x00080010},
-	{0x0001610c, 0x00000000},
 	{0x00016140, 0x50804008},
 	{0x00016144, 0x01884080},
 	{0x00016148, 0x000080c0},
 	{0x00016280, 0x01000015},
-	{0x00016284, 0x05530000},
+	{0x00016284, 0x15530000},
 	{0x00016288, 0x00318000},
 	{0x0001628c, 0x50000000},
-	{0x00016290, 0x4080294f},
 	{0x00016380, 0x00000000},
 	{0x00016384, 0x00000000},
 	{0x00016388, 0x00800700},
@@ -219,13 +218,14 @@ static const u32 ar9340_1p0_radio_core[][2] = {
 };
 
 static const u32 ar9340_1p0_radio_core_40M[][2] = {
+	/* Addr      allmodes  */
 	{0x0001609c, 0x02566f3a},
 	{0x000160ac, 0xa4647c00},
 	{0x000160b0, 0x01885f5a},
 };
 
 static const u32 ar9340_1p0_mac_postamble[][5] = {
-	/* Addr       5G_HT20     5G_HT40     2G_HT40    2G_HT20  */
+	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
 	{0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160},
 	{0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c},
 	{0x000010b0, 0x00000e60, 0x00001cc0, 0x00007c70, 0x00003e38},
@@ -237,34 +237,37 @@ static const u32 ar9340_1p0_mac_postamble[][5] = {
 };
 
 static const u32 ar9340_1p0_soc_postamble[][5] = {
-	/*   Addr     5G_HT20     5G_HT40     2G_HT40     2G_HT20  */
+	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
 	{0x00007010, 0x00000023, 0x00000023, 0x00000023, 0x00000023},
 };
 
 static const u32 ar9340_1p0_baseband_postamble[][5] = {
-	/*  Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20  */
+	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
 	{0x00009810, 0xd00a8005, 0xd00a8005, 0xd00a8011, 0xd00a8011},
 	{0x00009820, 0x206a022e, 0x206a022e, 0x206a022e, 0x206a022e},
 	{0x00009824, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0},
 	{0x00009828, 0x06903081, 0x06903081, 0x06903881, 0x06903881},
 	{0x0000982c, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4},
 	{0x00009830, 0x0000059c, 0x0000059c, 0x0000119c, 0x0000119c},
-	{0x00009c00, 0x00000044, 0x000000c4, 0x000000c4, 0x00000044},
-	{0x00009e00, 0x0372161e, 0x0372161e, 0x037216a0, 0x037216a0},
-	{0x00009e04, 0x00182020, 0x00182020, 0x00182020, 0x00182020},
+	{0x00009c00, 0x000000c4, 0x000000c4, 0x000000c4, 0x000000c4},
+	{0x00009e00, 0x0372111a, 0x0372111a, 0x037216a0, 0x037216a0},
+	{0x00009e04, 0x001c2020, 0x001c2020, 0x001c2020, 0x001c2020},
 	{0x00009e0c, 0x6c4000e2, 0x6d4000e2, 0x6d4000e2, 0x6c4000e2},
 	{0x00009e10, 0x7ec88d2e, 0x7ec88d2e, 0x7ec88d2e, 0x7ec88d2e},
-	{0x00009e14, 0x31395d5e, 0x3139605e, 0x3139605e, 0x31395d5e},
+	{0x00009e14, 0x37b95d5e, 0x37b9605e, 0x3379605e, 0x33795d5e},
 	{0x00009e18, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
 	{0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c},
 	{0x00009e20, 0x000003b5, 0x000003b5, 0x000003ce, 0x000003ce},
 	{0x00009e2c, 0x0000001c, 0x0000001c, 0x00000021, 0x00000021},
+	{0x00009e3c, 0xcf946220, 0xcf946220, 0xcf946222, 0xcf946222},
 	{0x00009e44, 0x02321e27, 0x02321e27, 0x02291e27, 0x02291e27},
 	{0x00009e48, 0x5030201a, 0x5030201a, 0x50302012, 0x50302012},
 	{0x00009fc8, 0x0003f000, 0x0003f000, 0x0001a000, 0x0001a000},
-	{0x0000a204, 0x00003fc0, 0x00003fc4, 0x00003fc4, 0x00003fc0},
+	{0x0000a204, 0x00003ec0, 0x00003ec4, 0x00003ec4, 0x00003ec0},
 	{0x0000a208, 0x00000104, 0x00000104, 0x00000004, 0x00000004},
+	{0x0000a22c, 0x07e26a2f, 0x07e26a2f, 0x01026a2f, 0x01026a2f},
 	{0x0000a230, 0x0000000a, 0x00000014, 0x00000016, 0x0000000b},
+	{0x0000a234, 0x00000fff, 0x10000fff, 0x10000fff, 0x00000fff},
 	{0x0000a238, 0xffb81018, 0xffb81018, 0xffb81018, 0xffb81018},
 	{0x0000a250, 0x00000000, 0x00000000, 0x00000210, 0x00000108},
 	{0x0000a254, 0x000007d0, 0x00000fa0, 0x00001130, 0x00000898},
@@ -277,11 +280,11 @@ static const u32 ar9340_1p0_baseband_postamble[][5] = {
 	{0x0000a288, 0x00000220, 0x00000220, 0x00000110, 0x00000110},
 	{0x0000a28c, 0x00011111, 0x00011111, 0x00022222, 0x00022222},
 	{0x0000a2c4, 0x00158d18, 0x00158d18, 0x00158d18, 0x00158d18},
-	{0x0000a2d0, 0x00071981, 0x00071981, 0x00071981, 0x00071982},
-	{0x0000a2d8, 0xf999a83a, 0xf999a83a, 0xf999a83a, 0xf999a83a},
+	{0x0000a2d0, 0x00041983, 0x00041983, 0x00041982, 0x00041982},
+	{0x0000a2d8, 0x7999a83a, 0x7999a83a, 0x7999a83a, 0x7999a83a},
 	{0x0000a358, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
 	{0x0000a830, 0x0000019c, 0x0000019c, 0x0000019c, 0x0000019c},
-	{0x0000ae04, 0x00180000, 0x00180000, 0x00180000, 0x00180000},
+	{0x0000ae04, 0x001c0000, 0x001c0000, 0x001c0000, 0x001c0000},
 	{0x0000ae18, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
 	{0x0000ae1c, 0x0000019c, 0x0000019c, 0x0000019c, 0x0000019c},
 	{0x0000ae20, 0x000001b5, 0x000001b5, 0x000001ce, 0x000001ce},
@@ -289,21 +292,21 @@ static const u32 ar9340_1p0_baseband_postamble[][5] = {
 };
 
 static const u32 ar9340_1p0_baseband_core[][2] = {
-	/*  Addr     allmodes  */
+	/* Addr      allmodes  */
 	{0x00009800, 0xafe68e30},
 	{0x00009804, 0xfd14e000},
 	{0x00009808, 0x9c0a9f6b},
 	{0x0000980c, 0x04900000},
-	{0x00009814, 0xb280c00a},
+	{0x00009814, 0x3280c00a},
 	{0x00009818, 0x00000000},
 	{0x0000981c, 0x00020028},
-	{0x00009834, 0x5f3ca3de},
+	{0x00009834, 0x6400a190},
 	{0x00009838, 0x0108ecff},
-	{0x0000983c, 0x14750600},
+	{0x0000983c, 0x14000600},
 	{0x00009880, 0x201fff00},
 	{0x00009884, 0x00001042},
 	{0x000098a4, 0x00200400},
-	{0x000098b0, 0x52440bbe},
+	{0x000098b0, 0x32840bbe},
 	{0x000098d0, 0x004b6a8e},
 	{0x000098d4, 0x00000820},
 	{0x000098dc, 0x00000000},
@@ -329,7 +332,6 @@ static const u32 ar9340_1p0_baseband_core[][2] = {
 	{0x00009e30, 0x06336f77},
 	{0x00009e34, 0x6af6532f},
 	{0x00009e38, 0x0cc80c00},
-	{0x00009e3c, 0xcf946222},
 	{0x00009e40, 0x0d261820},
 	{0x00009e4c, 0x00001004},
 	{0x00009e50, 0x00ff03f1},
@@ -342,8 +344,6 @@ static const u32 ar9340_1p0_baseband_core[][2] = {
 	{0x0000a220, 0x00000000},
 	{0x0000a224, 0x00000000},
 	{0x0000a228, 0x10002310},
-	{0x0000a22c, 0x01036a1e},
-	{0x0000a234, 0x10000fff},
 	{0x0000a23c, 0x00000000},
 	{0x0000a244, 0x0c000000},
 	{0x0000a2a0, 0x00000001},
@@ -351,10 +351,6 @@ static const u32 ar9340_1p0_baseband_core[][2] = {
 	{0x0000a2c8, 0x00000000},
 	{0x0000a2cc, 0x18c43433},
 	{0x0000a2d4, 0x00000000},
-	{0x0000a2dc, 0x00000000},
-	{0x0000a2e0, 0x00000000},
-	{0x0000a2e4, 0x00000000},
-	{0x0000a2e8, 0x00000000},
 	{0x0000a2ec, 0x00000000},
 	{0x0000a2f0, 0x00000000},
 	{0x0000a2f4, 0x00000000},
@@ -385,7 +381,7 @@ static const u32 ar9340_1p0_baseband_core[][2] = {
 	{0x0000a3e8, 0x20202020},
 	{0x0000a3ec, 0x20202020},
 	{0x0000a3f0, 0x00000000},
-	{0x0000a3f4, 0x00000246},
+	{0x0000a3f4, 0x00000000},
 	{0x0000a3f8, 0x0cdbd380},
 	{0x0000a3fc, 0x000f0f01},
 	{0x0000a400, 0x8fa91f01},
@@ -402,33 +398,17 @@ static const u32 ar9340_1p0_baseband_core[][2] = {
 	{0x0000a430, 0x1ce739ce},
 	{0x0000a434, 0x00000000},
 	{0x0000a438, 0x00001801},
-	{0x0000a43c, 0x00000000},
+	{0x0000a43c, 0x00100000},
 	{0x0000a440, 0x00000000},
 	{0x0000a444, 0x00000000},
-	{0x0000a448, 0x04000080},
+	{0x0000a448, 0x05000080},
 	{0x0000a44c, 0x00000001},
 	{0x0000a450, 0x00010000},
 	{0x0000a458, 0x00000000},
-	{0x0000a600, 0x00000000},
-	{0x0000a604, 0x00000000},
-	{0x0000a608, 0x00000000},
-	{0x0000a60c, 0x00000000},
-	{0x0000a610, 0x00000000},
-	{0x0000a614, 0x00000000},
-	{0x0000a618, 0x00000000},
-	{0x0000a61c, 0x00000000},
-	{0x0000a620, 0x00000000},
-	{0x0000a624, 0x00000000},
-	{0x0000a628, 0x00000000},
-	{0x0000a62c, 0x00000000},
-	{0x0000a630, 0x00000000},
-	{0x0000a634, 0x00000000},
-	{0x0000a638, 0x00000000},
-	{0x0000a63c, 0x00000000},
 	{0x0000a640, 0x00000000},
 	{0x0000a644, 0x3fad9d74},
 	{0x0000a648, 0x0048060a},
-	{0x0000a64c, 0x00000637},
+	{0x0000a64c, 0x00003c37},
 	{0x0000a670, 0x03020100},
 	{0x0000a674, 0x09080504},
 	{0x0000a678, 0x0d0c0b0a},
@@ -451,10 +431,6 @@ static const u32 ar9340_1p0_baseband_core[][2] = {
 	{0x0000a8f4, 0x00000000},
 	{0x0000b2d0, 0x00000080},
 	{0x0000b2d4, 0x00000000},
-	{0x0000b2dc, 0x00000000},
-	{0x0000b2e0, 0x00000000},
-	{0x0000b2e4, 0x00000000},
-	{0x0000b2e8, 0x00000000},
 	{0x0000b2ec, 0x00000000},
 	{0x0000b2f0, 0x00000000},
 	{0x0000b2f4, 0x00000000},
@@ -465,80 +441,108 @@ static const u32 ar9340_1p0_baseband_core[][2] = {
 };
 
 static const u32 ar9340Modes_high_power_tx_gain_table_1p0[][5] = {
-	/*  Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20  */
+	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
+	{0x0000a2dc, 0x0380c7fc, 0x0380c7fc, 0x03aaa352, 0x03aaa352},
+	{0x0000a2e0, 0x0000f800, 0x0000f800, 0x03ccc584, 0x03ccc584},
+	{0x0000a2e4, 0x03ff0000, 0x03ff0000, 0x03f0f800, 0x03f0f800},
+	{0x0000a2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
+	{0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a60c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a610, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a614, 0x01404000, 0x01404000, 0x01404000, 0x01404000},
+	{0x0000a618, 0x01404501, 0x01404501, 0x01404501, 0x01404501},
+	{0x0000a61c, 0x02008802, 0x02008802, 0x02008501, 0x02008501},
+	{0x0000a620, 0x0300cc03, 0x0300cc03, 0x0280ca03, 0x0280ca03},
+	{0x0000a624, 0x0300cc03, 0x0300cc03, 0x03010c04, 0x03010c04},
+	{0x0000a628, 0x0300cc03, 0x0300cc03, 0x04014c04, 0x04014c04},
+	{0x0000a62c, 0x03810c03, 0x03810c03, 0x04015005, 0x04015005},
+	{0x0000a630, 0x03810e04, 0x03810e04, 0x04015005, 0x04015005},
+	{0x0000a634, 0x03810e04, 0x03810e04, 0x04015005, 0x04015005},
+	{0x0000a638, 0x03810e04, 0x03810e04, 0x04015005, 0x04015005},
+	{0x0000a63c, 0x03810e04, 0x03810e04, 0x04015005, 0x04015005},
+	{0x0000b2dc, 0x0380c7fc, 0x0380c7fc, 0x03aaa352, 0x03aaa352},
+	{0x0000b2e0, 0x0000f800, 0x0000f800, 0x03ccc584, 0x03ccc584},
+	{0x0000b2e4, 0x03ff0000, 0x03ff0000, 0x03f0f800, 0x03f0f800},
+	{0x0000b2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
 	{0x0000a410, 0x000050d8, 0x000050d8, 0x000050d9, 0x000050d9},
 	{0x0000a500, 0x00002220, 0x00002220, 0x00000000, 0x00000000},
-	{0x0000a504, 0x04002222, 0x04002222, 0x04000002, 0x04000002},
-	{0x0000a508, 0x09002421, 0x09002421, 0x08000004, 0x08000004},
-	{0x0000a50c, 0x0d002621, 0x0d002621, 0x0b000200, 0x0b000200},
-	{0x0000a510, 0x13004620, 0x13004620, 0x0f000202, 0x0f000202},
-	{0x0000a514, 0x19004a20, 0x19004a20, 0x11000400, 0x11000400},
-	{0x0000a518, 0x1d004e20, 0x1d004e20, 0x15000402, 0x15000402},
-	{0x0000a51c, 0x21005420, 0x21005420, 0x19000404, 0x19000404},
-	{0x0000a520, 0x26005e20, 0x26005e20, 0x1b000603, 0x1b000603},
-	{0x0000a524, 0x2b005e40, 0x2b005e40, 0x1f000a02, 0x1f000a02},
-	{0x0000a528, 0x2f005e42, 0x2f005e42, 0x23000a04, 0x23000a04},
-	{0x0000a52c, 0x33005e44, 0x33005e44, 0x26000a20, 0x26000a20},
-	{0x0000a530, 0x38005e65, 0x38005e65, 0x2a000e20, 0x2a000e20},
-	{0x0000a534, 0x3c005e69, 0x3c005e69, 0x2e000e22, 0x2e000e22},
-	{0x0000a538, 0x40005e6b, 0x40005e6b, 0x31000e24, 0x31000e24},
-	{0x0000a53c, 0x44005e6d, 0x44005e6d, 0x34001640, 0x34001640},
-	{0x0000a540, 0x49005e72, 0x49005e72, 0x38001660, 0x38001660},
-	{0x0000a544, 0x4e005eb2, 0x4e005eb2, 0x3b001861, 0x3b001861},
-	{0x0000a548, 0x53005f12, 0x53005f12, 0x3e001a81, 0x3e001a81},
-	{0x0000a54c, 0x59025eb5, 0x59025eb5, 0x42001a83, 0x42001a83},
-	{0x0000a550, 0x5e025f12, 0x5e025f12, 0x44001c84, 0x44001c84},
-	{0x0000a554, 0x61027f12, 0x61027f12, 0x48001ce3, 0x48001ce3},
-	{0x0000a558, 0x6702bf12, 0x6702bf12, 0x4c001ce5, 0x4c001ce5},
-	{0x0000a55c, 0x6b02bf14, 0x6b02bf14, 0x50001ce9, 0x50001ce9},
-	{0x0000a560, 0x6f02bf16, 0x6f02bf16, 0x54001ceb, 0x54001ceb},
-	{0x0000a564, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
-	{0x0000a568, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
-	{0x0000a56c, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
-	{0x0000a570, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
-	{0x0000a574, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
-	{0x0000a578, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
-	{0x0000a57c, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
+	{0x0000a504, 0x04002222, 0x04002222, 0x02000001, 0x02000001},
+	{0x0000a508, 0x09002421, 0x09002421, 0x05000003, 0x05000003},
+	{0x0000a50c, 0x0d002621, 0x0d002621, 0x0a000005, 0x0a000005},
+	{0x0000a510, 0x13004620, 0x13004620, 0x0e000201, 0x0e000201},
+	{0x0000a514, 0x19004a20, 0x19004a20, 0x11000203, 0x11000203},
+	{0x0000a518, 0x1d004e20, 0x1d004e20, 0x14000401, 0x14000401},
+	{0x0000a51c, 0x21005420, 0x21005420, 0x18000403, 0x18000403},
+	{0x0000a520, 0x26005e20, 0x26005e20, 0x1b000602, 0x1b000602},
+	{0x0000a524, 0x2b005e40, 0x2b005e40, 0x1f000802, 0x1f000802},
+	{0x0000a528, 0x2f005e42, 0x2f005e42, 0x21000620, 0x21000620},
+	{0x0000a52c, 0x33005e44, 0x33005e44, 0x25000820, 0x25000820},
+	{0x0000a530, 0x38005e65, 0x38005e65, 0x29000822, 0x29000822},
+	{0x0000a534, 0x3c005e69, 0x3c005e69, 0x2d000824, 0x2d000824},
+	{0x0000a538, 0x40005e6b, 0x40005e6b, 0x30000828, 0x30000828},
+	{0x0000a53c, 0x44005e6d, 0x44005e6d, 0x3400082a, 0x3400082a},
+	{0x0000a540, 0x49005e72, 0x49005e72, 0x38000849, 0x38000849},
+	{0x0000a544, 0x4e005eb2, 0x4e005eb2, 0x3b000a2c, 0x3b000a2c},
+	{0x0000a548, 0x53005f12, 0x53005f12, 0x3e000e2b, 0x3e000e2b},
+	{0x0000a54c, 0x59025eb5, 0x59025eb5, 0x42000e2d, 0x42000e2d},
+	{0x0000a550, 0x5e025f12, 0x5e025f12, 0x4500124a, 0x4500124a},
+	{0x0000a554, 0x61027f12, 0x61027f12, 0x4900124c, 0x4900124c},
+	{0x0000a558, 0x6702bf12, 0x6702bf12, 0x4c00126c, 0x4c00126c},
+	{0x0000a55c, 0x6b02bf14, 0x6b02bf14, 0x4f00128c, 0x4f00128c},
+	{0x0000a560, 0x6f02bf16, 0x6f02bf16, 0x52001290, 0x52001290},
+	{0x0000a564, 0x6f02bf16, 0x6f02bf16, 0x56001292, 0x56001292},
+	{0x0000a568, 0x6f02bf16, 0x6f02bf16, 0x56001292, 0x56001292},
+	{0x0000a56c, 0x6f02bf16, 0x6f02bf16, 0x56001292, 0x56001292},
+	{0x0000a570, 0x6f02bf16, 0x6f02bf16, 0x56001292, 0x56001292},
+	{0x0000a574, 0x6f02bf16, 0x6f02bf16, 0x56001292, 0x56001292},
+	{0x0000a578, 0x6f02bf16, 0x6f02bf16, 0x56001292, 0x56001292},
+	{0x0000a57c, 0x6f02bf16, 0x6f02bf16, 0x56001292, 0x56001292},
 	{0x0000a580, 0x00802220, 0x00802220, 0x00800000, 0x00800000},
-	{0x0000a584, 0x04802222, 0x04802222, 0x04800002, 0x04800002},
-	{0x0000a588, 0x09802421, 0x09802421, 0x08800004, 0x08800004},
-	{0x0000a58c, 0x0d802621, 0x0d802621, 0x0b800200, 0x0b800200},
-	{0x0000a590, 0x13804620, 0x13804620, 0x0f800202, 0x0f800202},
-	{0x0000a594, 0x19804a20, 0x19804a20, 0x11800400, 0x11800400},
-	{0x0000a598, 0x1d804e20, 0x1d804e20, 0x15800402, 0x15800402},
-	{0x0000a59c, 0x21805420, 0x21805420, 0x19800404, 0x19800404},
-	{0x0000a5a0, 0x26805e20, 0x26805e20, 0x1b800603, 0x1b800603},
-	{0x0000a5a4, 0x2b805e40, 0x2b805e40, 0x1f800a02, 0x1f800a02},
-	{0x0000a5a8, 0x2f805e42, 0x2f805e42, 0x23800a04, 0x23800a04},
-	{0x0000a5ac, 0x33805e44, 0x33805e44, 0x26800a20, 0x26800a20},
-	{0x0000a5b0, 0x38805e65, 0x38805e65, 0x2a800e20, 0x2a800e20},
-	{0x0000a5b4, 0x3c805e69, 0x3c805e69, 0x2e800e22, 0x2e800e22},
-	{0x0000a5b8, 0x40805e6b, 0x40805e6b, 0x31800e24, 0x31800e24},
-	{0x0000a5bc, 0x44805e6d, 0x44805e6d, 0x34801640, 0x34801640},
-	{0x0000a5c0, 0x49805e72, 0x49805e72, 0x38801660, 0x38801660},
-	{0x0000a5c4, 0x4e805eb2, 0x4e805eb2, 0x3b801861, 0x3b801861},
-	{0x0000a5c8, 0x53805f12, 0x53805f12, 0x3e801a81, 0x3e801a81},
-	{0x0000a5cc, 0x59825eb2, 0x59825eb2, 0x42801a83, 0x42801a83},
-	{0x0000a5d0, 0x5e825f12, 0x5e825f12, 0x44801c84, 0x44801c84},
-	{0x0000a5d4, 0x61827f12, 0x61827f12, 0x48801ce3, 0x48801ce3},
-	{0x0000a5d8, 0x6782bf12, 0x6782bf12, 0x4c801ce5, 0x4c801ce5},
-	{0x0000a5dc, 0x6b82bf14, 0x6b82bf14, 0x50801ce9, 0x50801ce9},
-	{0x0000a5e0, 0x6f82bf16, 0x6f82bf16, 0x54801ceb, 0x54801ceb},
-	{0x0000a5e4, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
-	{0x0000a5e8, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
-	{0x0000a5ec, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
-	{0x0000a5f0, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
-	{0x0000a5f4, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
-	{0x0000a5f8, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
-	{0x0000a5fc, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
-	{0x00016044, 0x056db2db, 0x056db2db, 0x056db2db, 0x056db2db},
+	{0x0000a584, 0x04802222, 0x04802222, 0x02800001, 0x02800001},
+	{0x0000a588, 0x09802421, 0x09802421, 0x05800003, 0x05800003},
+	{0x0000a58c, 0x0d802621, 0x0d802621, 0x0a800005, 0x0a800005},
+	{0x0000a590, 0x13804620, 0x13804620, 0x0e800201, 0x0e800201},
+	{0x0000a594, 0x19804a20, 0x19804a20, 0x11800203, 0x11800203},
+	{0x0000a598, 0x1d804e20, 0x1d804e20, 0x14800401, 0x14800401},
+	{0x0000a59c, 0x21805420, 0x21805420, 0x18800403, 0x18800403},
+	{0x0000a5a0, 0x26805e20, 0x26805e20, 0x1b800602, 0x1b800602},
+	{0x0000a5a4, 0x2b805e40, 0x2b805e40, 0x1f800802, 0x1f800802},
+	{0x0000a5a8, 0x2f805e42, 0x2f805e42, 0x21800620, 0x21800620},
+	{0x0000a5ac, 0x33805e44, 0x33805e44, 0x25800820, 0x25800820},
+	{0x0000a5b0, 0x38805e65, 0x38805e65, 0x29800822, 0x29800822},
+	{0x0000a5b4, 0x3c805e69, 0x3c805e69, 0x2d800824, 0x2d800824},
+	{0x0000a5b8, 0x40805e6b, 0x40805e6b, 0x30800828, 0x30800828},
+	{0x0000a5bc, 0x44805e6d, 0x44805e6d, 0x3480082a, 0x3480082a},
+	{0x0000a5c0, 0x49805e72, 0x49805e72, 0x38800849, 0x38800849},
+	{0x0000a5c4, 0x4e805eb2, 0x4e805eb2, 0x3b800a2c, 0x3b800a2c},
+	{0x0000a5c8, 0x53805f12, 0x53805f12, 0x3e800e2b, 0x3e800e2b},
+	{0x0000a5cc, 0x59825eb2, 0x59825eb2, 0x42800e2d, 0x42800e2d},
+	{0x0000a5d0, 0x5e825f12, 0x5e825f12, 0x4580124a, 0x4580124a},
+	{0x0000a5d4, 0x61827f12, 0x61827f12, 0x4980124c, 0x4980124c},
+	{0x0000a5d8, 0x6782bf12, 0x6782bf12, 0x4c80126c, 0x4c80126c},
+	{0x0000a5dc, 0x6b82bf14, 0x6b82bf14, 0x4f80128c, 0x4f80128c},
+	{0x0000a5e0, 0x6f82bf16, 0x6f82bf16, 0x52801290, 0x52801290},
+	{0x0000a5e4, 0x6f82bf16, 0x6f82bf16, 0x56801292, 0x56801292},
+	{0x0000a5e8, 0x6f82bf16, 0x6f82bf16, 0x56801292, 0x56801292},
+	{0x0000a5ec, 0x6f82bf16, 0x6f82bf16, 0x56801292, 0x56801292},
+	{0x0000a5f0, 0x6f82bf16, 0x6f82bf16, 0x56801292, 0x56801292},
+	{0x0000a5f4, 0x6f82bf16, 0x6f82bf16, 0x56801292, 0x56801292},
+	{0x0000a5f8, 0x6f82bf16, 0x6f82bf16, 0x56801292, 0x56801292},
+	{0x0000a5fc, 0x6f82bf16, 0x6f82bf16, 0x56801292, 0x56801292},
+	{0x00016044, 0x056db2db, 0x056db2db, 0x022492db, 0x022492db},
 	{0x00016048, 0x24925266, 0x24925266, 0x24925266, 0x24925266},
-	{0x00016444, 0x056db2db, 0x056db2db, 0x056db2db, 0x056db2db},
+	{0x00016444, 0x056db2db, 0x056db2db, 0x022492db, 0x022492db},
 	{0x00016448, 0x24925266, 0x24925266, 0x24925266, 0x24925266},
 };
 
 static const u32 ar9340Modes_high_ob_db_tx_gain_table_1p0[][5] = {
-	/*  Addr       5G_HT20    5G_HT40     2G_HT40     2G_HT20  */
+	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
+	{0x0000a2dc, 0x01feee00, 0x01feee00, 0x03aaa352, 0x03aaa352},
+	{0x0000a2e0, 0x0000f000, 0x0000f000, 0x03ccc584, 0x03ccc584},
+	{0x0000a2e4, 0x01ff0000, 0x01ff0000, 0x03f0f800, 0x03f0f800},
+	{0x0000a2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
 	{0x0000a410, 0x000050d8, 0x000050d8, 0x000050d9, 0x000050d9},
 	{0x0000a500, 0x00002220, 0x00002220, 0x00000000, 0x00000000},
 	{0x0000a504, 0x04002222, 0x04002222, 0x04000002, 0x04000002},
@@ -559,7 +563,7 @@ static const u32 ar9340Modes_high_ob_db_tx_gain_table_1p0[][5] = {
 	{0x0000a540, 0x49005e72, 0x49005e72, 0x38001660, 0x38001660},
 	{0x0000a544, 0x4e005eb2, 0x4e005eb2, 0x3b001861, 0x3b001861},
 	{0x0000a548, 0x53005f12, 0x53005f12, 0x3e001a81, 0x3e001a81},
-	{0x0000a54c, 0x59025eb5, 0x59025eb5, 0x42001a83, 0x42001a83},
+	{0x0000a54c, 0x59025eb2, 0x59025eb2, 0x42001a83, 0x42001a83},
 	{0x0000a550, 0x5e025f12, 0x5e025f12, 0x44001c84, 0x44001c84},
 	{0x0000a554, 0x61027f12, 0x61027f12, 0x48001ce3, 0x48001ce3},
 	{0x0000a558, 0x6702bf12, 0x6702bf12, 0x4c001ce5, 0x4c001ce5},
@@ -604,13 +608,43 @@ static const u32 ar9340Modes_high_ob_db_tx_gain_table_1p0[][5] = {
 	{0x0000a5f4, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
 	{0x0000a5f8, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
 	{0x0000a5fc, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
+	{0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a60c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a610, 0x00804000, 0x00804000, 0x00000000, 0x00000000},
+	{0x0000a614, 0x00804201, 0x00804201, 0x01404000, 0x01404000},
+	{0x0000a618, 0x0280c802, 0x0280c802, 0x01404501, 0x01404501},
+	{0x0000a61c, 0x0280ca03, 0x0280ca03, 0x02008501, 0x02008501},
+	{0x0000a620, 0x04c15104, 0x04c15104, 0x0280ca03, 0x0280ca03},
+	{0x0000a624, 0x04c15305, 0x04c15305, 0x03010c04, 0x03010c04},
+	{0x0000a628, 0x04c15305, 0x04c15305, 0x04014c04, 0x04014c04},
+	{0x0000a62c, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
+	{0x0000a630, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
+	{0x0000a634, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
+	{0x0000a638, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
+	{0x0000a63c, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
+	{0x0000b2dc, 0x01feee00, 0x01feee00, 0x03aaa352, 0x03aaa352},
+	{0x0000b2e0, 0x0000f000, 0x0000f000, 0x03ccc584, 0x03ccc584},
+	{0x0000b2e4, 0x01ff0000, 0x01ff0000, 0x03f0f800, 0x03f0f800},
+	{0x0000b2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
 	{0x00016044, 0x03b6d2e4, 0x03b6d2e4, 0x03b6d2e4, 0x03b6d2e4},
-	{0x00016048, 0x8e481266, 0x8e481266, 0x8e481266, 0x8e481266},
+	{0x00016048, 0x8e481666, 0x8e481666, 0x8e481266, 0x8e481266},
+	{0x00016280, 0x01000015, 0x01000015, 0x01001015, 0x01001015},
 	{0x00016444, 0x03b6d2e4, 0x03b6d2e4, 0x03b6d2e4, 0x03b6d2e4},
-	{0x00016448, 0x8e481266, 0x8e481266, 0x8e481266, 0x8e481266},
+	{0x00016448, 0x8e481666, 0x8e481666, 0x8e481266, 0x8e481266},
 };
+
 static const u32 ar9340Modes_ub124_tx_gain_table_1p0[][5] = {
-	/*  Addr      5G_HT20      5G_HT40     2G_HT40    2G_HT20  */
+	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
+	{0x00009810, 0xd00a8005, 0xd00a8005, 0xd00a8005, 0xd00a8005},
+	{0x00009820, 0x206a022e, 0x206a022e, 0x206a00ae, 0x206a00ae},
+	{0x00009830, 0x0000059c, 0x0000059c, 0x0000059c, 0x0000059c},
+	{0x00009e10, 0x7ec88d2e, 0x7ec88d2e, 0x7ec82d2e, 0x7ec82d2e},
+	{0x0000a2dc, 0xfef5d402, 0xfef5d402, 0xfdab5b52, 0xfdab5b52},
+	{0x0000a2e0, 0xfe896600, 0xfe896600, 0xfd339c84, 0xfd339c84},
+	{0x0000a2e4, 0xff01f800, 0xff01f800, 0xfec3e000, 0xfec3e000},
+	{0x0000a2e8, 0xfffe0000, 0xfffe0000, 0xfffc0000, 0xfffc0000},
 	{0x0000a410, 0x000050d8, 0x000050d8, 0x000050d9, 0x000050d9},
 	{0x0000a500, 0x00002220, 0x00002220, 0x00000000, 0x00000000},
 	{0x0000a504, 0x04002222, 0x04002222, 0x04000002, 0x04000002},
@@ -676,15 +710,34 @@ static const u32 ar9340Modes_ub124_tx_gain_table_1p0[][5] = {
 	{0x0000a5f4, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
 	{0x0000a5f8, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
 	{0x0000a5fc, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
-	{0x00016044, 0x036db2db, 0x036db2db, 0x036db2db, 0x036db2db},
-	{0x00016048, 0x69b65266, 0x69b65266, 0x69b65266, 0x69b65266},
-	{0x00016444, 0x036db2db, 0x036db2db, 0x036db2db, 0x036db2db},
-	{0x00016448, 0x69b65266, 0x69b65266, 0x69b65266, 0x69b65266},
+	{0x00016044, 0x03b6d2e4, 0x03b6d2e4, 0x03b6d2e4, 0x03b6d2e4},
+	{0x00016048, 0x8e480086, 0x8e480086, 0x8e480086, 0x8e480086},
+	{0x00016444, 0x03b6d2e4, 0x03b6d2e4, 0x03b6d2e4, 0x03b6d2e4},
+	{0x00016448, 0x8e480086, 0x8e480086, 0x8e480086, 0x8e480086},
+	{0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a60c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a610, 0x00804000, 0x00804000, 0x00000000, 0x00000000},
+	{0x0000a614, 0x00804201, 0x00804201, 0x01404000, 0x01404000},
+	{0x0000a618, 0x0280c802, 0x0280c802, 0x01404501, 0x01404501},
+	{0x0000a61c, 0x0280ca03, 0x0280ca03, 0x02008501, 0x02008501},
+	{0x0000a620, 0x04c15104, 0x04c15104, 0x0280ca03, 0x0280ca03},
+	{0x0000a624, 0x04c15305, 0x04c15305, 0x03010c04, 0x03010c04},
+	{0x0000a628, 0x04c15305, 0x04c15305, 0x04014c04, 0x04014c04},
+	{0x0000a62c, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
+	{0x0000a630, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
+	{0x0000a634, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
+	{0x0000a638, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
+	{0x0000a63c, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
+	{0x0000b2dc, 0xfef5d402, 0xfef5d402, 0xfdab5b52, 0xfdab5b52},
+	{0x0000b2e0, 0xfe896600, 0xfe896600, 0xfd339c84, 0xfd339c84},
+	{0x0000b2e4, 0xff01f800, 0xff01f800, 0xfec3e000, 0xfec3e000},
+	{0x0000b2e8, 0xfffe0000, 0xfffe0000, 0xfffc0000, 0xfffc0000},
 };
 
-
 static const u32 ar9340Common_rx_gain_table_1p0[][2] = {
-	/*   Addr     allmodes */
+	/* Addr      allmodes  */
 	{0x0000a000, 0x00010000},
 	{0x0000a004, 0x00030002},
 	{0x0000a008, 0x00050004},
@@ -845,14 +898,14 @@ static const u32 ar9340Common_rx_gain_table_1p0[][2] = {
 	{0x0000b074, 0x00000000},
 	{0x0000b078, 0x00000000},
 	{0x0000b07c, 0x00000000},
-	{0x0000b080, 0x32323232},
-	{0x0000b084, 0x2f2f3232},
-	{0x0000b088, 0x23282a2d},
-	{0x0000b08c, 0x1c1e2123},
-	{0x0000b090, 0x14171919},
-	{0x0000b094, 0x0e0e1214},
-	{0x0000b098, 0x03050707},
-	{0x0000b09c, 0x00030303},
+	{0x0000b080, 0x23232323},
+	{0x0000b084, 0x21232323},
+	{0x0000b088, 0x19191c1e},
+	{0x0000b08c, 0x12141417},
+	{0x0000b090, 0x07070e0e},
+	{0x0000b094, 0x03030305},
+	{0x0000b098, 0x00000003},
+	{0x0000b09c, 0x00000000},
 	{0x0000b0a0, 0x00000000},
 	{0x0000b0a4, 0x00000000},
 	{0x0000b0a8, 0x00000000},
@@ -944,7 +997,11 @@ static const u32 ar9340Common_rx_gain_table_1p0[][2] = {
 };
 
 static const u32 ar9340Modes_low_ob_db_tx_gain_table_1p0[][5] = {
-	/*  Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20  */
+	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
+	{0x0000a2dc, 0x0380c7fc, 0x0380c7fc, 0x03aaa352, 0x03aaa352},
+	{0x0000a2e0, 0x0000f800, 0x0000f800, 0x03ccc584, 0x03ccc584},
+	{0x0000a2e4, 0x03ff0000, 0x03ff0000, 0x03f0f800, 0x03f0f800},
+	{0x0000a2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
 	{0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9},
 	{0x0000a500, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
 	{0x0000a504, 0x06000003, 0x06000003, 0x04000002, 0x04000002},
@@ -952,8 +1009,8 @@ static const u32 ar9340Modes_low_ob_db_tx_gain_table_1p0[][5] = {
 	{0x0000a50c, 0x10000023, 0x10000023, 0x0b000200, 0x0b000200},
 	{0x0000a510, 0x16000220, 0x16000220, 0x0f000202, 0x0f000202},
 	{0x0000a514, 0x1c000223, 0x1c000223, 0x12000400, 0x12000400},
-	{0x0000a518, 0x21020220, 0x21020220, 0x16000402, 0x16000402},
-	{0x0000a51c, 0x27020223, 0x27020223, 0x19000404, 0x19000404},
+	{0x0000a518, 0x21002220, 0x21002220, 0x16000402, 0x16000402},
+	{0x0000a51c, 0x27002223, 0x27002223, 0x19000404, 0x19000404},
 	{0x0000a520, 0x2b022220, 0x2b022220, 0x1c000603, 0x1c000603},
 	{0x0000a524, 0x2f022222, 0x2f022222, 0x21000a02, 0x21000a02},
 	{0x0000a528, 0x34022225, 0x34022225, 0x25000a04, 0x25000a04},
@@ -965,19 +1022,19 @@ static const u32 ar9340Modes_low_ob_db_tx_gain_table_1p0[][5] = {
 	{0x0000a540, 0x4e02246c, 0x4e02246c, 0x3c001660, 0x3c001660},
 	{0x0000a544, 0x5302266c, 0x5302266c, 0x3f001861, 0x3f001861},
 	{0x0000a548, 0x5702286c, 0x5702286c, 0x43001a81, 0x43001a81},
-	{0x0000a54c, 0x5c04286b, 0x5c04286b, 0x47001a83, 0x47001a83},
-	{0x0000a550, 0x61042a6c, 0x61042a6c, 0x4a001c84, 0x4a001c84},
-	{0x0000a554, 0x66062a6c, 0x66062a6c, 0x4e001ce3, 0x4e001ce3},
-	{0x0000a558, 0x6b062e6c, 0x6b062e6c, 0x52001ce5, 0x52001ce5},
-	{0x0000a55c, 0x7006308c, 0x7006308c, 0x56001ce9, 0x56001ce9},
-	{0x0000a560, 0x730a308a, 0x730a308a, 0x5a001ceb, 0x5a001ceb},
-	{0x0000a564, 0x770a308c, 0x770a308c, 0x5d001eec, 0x5d001eec},
-	{0x0000a568, 0x770a308c, 0x770a308c, 0x5d001eec, 0x5d001eec},
-	{0x0000a56c, 0x770a308c, 0x770a308c, 0x5d001eec, 0x5d001eec},
-	{0x0000a570, 0x770a308c, 0x770a308c, 0x5d001eec, 0x5d001eec},
-	{0x0000a574, 0x770a308c, 0x770a308c, 0x5d001eec, 0x5d001eec},
-	{0x0000a578, 0x770a308c, 0x770a308c, 0x5d001eec, 0x5d001eec},
-	{0x0000a57c, 0x770a308c, 0x770a308c, 0x5d001eec, 0x5d001eec},
+	{0x0000a54c, 0x5c02486b, 0x5c02486b, 0x47001a83, 0x47001a83},
+	{0x0000a550, 0x61024a6c, 0x61024a6c, 0x4a001c84, 0x4a001c84},
+	{0x0000a554, 0x66026a6c, 0x66026a6c, 0x4e001ce3, 0x4e001ce3},
+	{0x0000a558, 0x6b026e6c, 0x6b026e6c, 0x52001ce5, 0x52001ce5},
+	{0x0000a55c, 0x7002708c, 0x7002708c, 0x56001ce9, 0x56001ce9},
+	{0x0000a560, 0x7302b08a, 0x7302b08a, 0x5a001ceb, 0x5a001ceb},
+	{0x0000a564, 0x7702b08c, 0x7702b08c, 0x5d001eec, 0x5d001eec},
+	{0x0000a568, 0x7702b08c, 0x7702b08c, 0x5d001eec, 0x5d001eec},
+	{0x0000a56c, 0x7702b08c, 0x7702b08c, 0x5d001eec, 0x5d001eec},
+	{0x0000a570, 0x7702b08c, 0x7702b08c, 0x5d001eec, 0x5d001eec},
+	{0x0000a574, 0x7702b08c, 0x7702b08c, 0x5d001eec, 0x5d001eec},
+	{0x0000a578, 0x7702b08c, 0x7702b08c, 0x5d001eec, 0x5d001eec},
+	{0x0000a57c, 0x7702b08c, 0x7702b08c, 0x5d001eec, 0x5d001eec},
 	{0x0000a580, 0x00800000, 0x00800000, 0x00800000, 0x00800000},
 	{0x0000a584, 0x06800003, 0x06800003, 0x04800002, 0x04800002},
 	{0x0000a588, 0x0a800020, 0x0a800020, 0x08800004, 0x08800004},
@@ -1010,14 +1067,40 @@ static const u32 ar9340Modes_low_ob_db_tx_gain_table_1p0[][5] = {
 	{0x0000a5f4, 0x778a308c, 0x778a308c, 0x5d801eec, 0x5d801eec},
 	{0x0000a5f8, 0x778a308c, 0x778a308c, 0x5d801eec, 0x5d801eec},
 	{0x0000a5fc, 0x778a308c, 0x778a308c, 0x5d801eec, 0x5d801eec},
+	{0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a60c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a610, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a614, 0x01404000, 0x01404000, 0x01404000, 0x01404000},
+	{0x0000a618, 0x01404501, 0x01404501, 0x01404501, 0x01404501},
+	{0x0000a61c, 0x02008802, 0x02008802, 0x02008501, 0x02008501},
+	{0x0000a620, 0x0300cc03, 0x0300cc03, 0x0280ca03, 0x0280ca03},
+	{0x0000a624, 0x0300cc03, 0x0300cc03, 0x03010c04, 0x03010c04},
+	{0x0000a628, 0x0300cc03, 0x0300cc03, 0x04014c04, 0x04014c04},
+	{0x0000a62c, 0x03810c03, 0x03810c03, 0x04015005, 0x04015005},
+	{0x0000a630, 0x03810e04, 0x03810e04, 0x04015005, 0x04015005},
+	{0x0000a634, 0x03810e04, 0x03810e04, 0x04015005, 0x04015005},
+	{0x0000a638, 0x03810e04, 0x03810e04, 0x04015005, 0x04015005},
+	{0x0000a63c, 0x03810e04, 0x03810e04, 0x04015005, 0x04015005},
+	{0x0000b2dc, 0x0380c7fc, 0x0380c7fc, 0x03aaa352, 0x03aaa352},
+	{0x0000b2e0, 0x0000f800, 0x0000f800, 0x03ccc584, 0x03ccc584},
+	{0x0000b2e4, 0x03ff0000, 0x03ff0000, 0x03f0f800, 0x03f0f800},
+	{0x0000b2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
 	{0x00016044, 0x056db2db, 0x056db2db, 0x056db2db, 0x056db2db},
-	{0x00016048, 0x24925266, 0x24925266, 0x24925266, 0x24925266},
+	{0x00016048, 0x24925666, 0x24925666, 0x24925266, 0x24925266},
+	{0x00016280, 0x01000015, 0x01000015, 0x01001015, 0x01001015},
+	{0x00016288, 0xf0318000, 0xf0318000, 0xf0318000, 0xf0318000},
 	{0x00016444, 0x056db2db, 0x056db2db, 0x056db2db, 0x056db2db},
-	{0x00016448, 0x24925266, 0x24925266, 0x24925266, 0x24925266},
+	{0x00016448, 0x24925666, 0x24925666, 0x24925266, 0x24925266},
 };
 
 static const u32 ar9340Modes_mixed_ob_db_tx_gain_table_1p0[][5] = {
-	/*  Addr       5G_HT20     5G_HT40     2G_HT40    2G_HT20  */
+	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
+	{0x0000a2dc, 0x0380c7fc, 0x0380c7fc, 0x03aaa352, 0x03aaa352},
+	{0x0000a2e0, 0x0000f800, 0x0000f800, 0x03ccc584, 0x03ccc584},
+	{0x0000a2e4, 0x03ff0000, 0x03ff0000, 0x03f0f800, 0x03f0f800},
+	{0x0000a2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
 	{0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9},
 	{0x0000a500, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
 	{0x0000a504, 0x06000003, 0x06000003, 0x04000002, 0x04000002},
@@ -1025,8 +1108,8 @@ static const u32 ar9340Modes_mixed_ob_db_tx_gain_table_1p0[][5] = {
 	{0x0000a50c, 0x10000023, 0x10000023, 0x0b000200, 0x0b000200},
 	{0x0000a510, 0x16000220, 0x16000220, 0x0f000202, 0x0f000202},
 	{0x0000a514, 0x1c000223, 0x1c000223, 0x11000400, 0x11000400},
-	{0x0000a518, 0x21020220, 0x21020220, 0x15000402, 0x15000402},
-	{0x0000a51c, 0x27020223, 0x27020223, 0x19000404, 0x19000404},
+	{0x0000a518, 0x21002220, 0x21002220, 0x15000402, 0x15000402},
+	{0x0000a51c, 0x27002223, 0x27002223, 0x19000404, 0x19000404},
 	{0x0000a520, 0x2b022220, 0x2b022220, 0x1b000603, 0x1b000603},
 	{0x0000a524, 0x2f022222, 0x2f022222, 0x1f000a02, 0x1f000a02},
 	{0x0000a528, 0x34022225, 0x34022225, 0x23000a04, 0x23000a04},
@@ -1038,19 +1121,19 @@ static const u32 ar9340Modes_mixed_ob_db_tx_gain_table_1p0[][5] = {
 	{0x0000a540, 0x4e02246c, 0x4e02246c, 0x38001660, 0x38001660},
 	{0x0000a544, 0x5302266c, 0x5302266c, 0x3b001861, 0x3b001861},
 	{0x0000a548, 0x5702286c, 0x5702286c, 0x3e001a81, 0x3e001a81},
-	{0x0000a54c, 0x5c04286b, 0x5c04286b, 0x42001a83, 0x42001a83},
-	{0x0000a550, 0x61042a6c, 0x61042a6c, 0x44001c84, 0x44001c84},
-	{0x0000a554, 0x66062a6c, 0x66062a6c, 0x48001ce3, 0x48001ce3},
-	{0x0000a558, 0x6b062e6c, 0x6b062e6c, 0x4c001ce5, 0x4c001ce5},
-	{0x0000a55c, 0x7006308c, 0x7006308c, 0x50001ce9, 0x50001ce9},
-	{0x0000a560, 0x730a308a, 0x730a308a, 0x54001ceb, 0x54001ceb},
-	{0x0000a564, 0x770a308c, 0x770a308c, 0x56001eec, 0x56001eec},
-	{0x0000a568, 0x770a308c, 0x770a308c, 0x56001eec, 0x56001eec},
-	{0x0000a56c, 0x770a308c, 0x770a308c, 0x56001eec, 0x56001eec},
-	{0x0000a570, 0x770a308c, 0x770a308c, 0x56001eec, 0x56001eec},
-	{0x0000a574, 0x770a308c, 0x770a308c, 0x56001eec, 0x56001eec},
-	{0x0000a578, 0x770a308c, 0x770a308c, 0x56001eec, 0x56001eec},
-	{0x0000a57c, 0x770a308c, 0x770a308c, 0x56001eec, 0x56001eec},
+	{0x0000a54c, 0x5c02486b, 0x5c02486b, 0x42001a83, 0x42001a83},
+	{0x0000a550, 0x61024a6c, 0x61024a6c, 0x44001c84, 0x44001c84},
+	{0x0000a554, 0x66026a6c, 0x66026a6c, 0x48001ce3, 0x48001ce3},
+	{0x0000a558, 0x6b026e6c, 0x6b026e6c, 0x4c001ce5, 0x4c001ce5},
+	{0x0000a55c, 0x7002708c, 0x7002708c, 0x50001ce9, 0x50001ce9},
+	{0x0000a560, 0x7302b08a, 0x7302b08a, 0x54001ceb, 0x54001ceb},
+	{0x0000a564, 0x7702b08c, 0x7702b08c, 0x56001eec, 0x56001eec},
+	{0x0000a568, 0x7702b08c, 0x7702b08c, 0x56001eec, 0x56001eec},
+	{0x0000a56c, 0x7702b08c, 0x7702b08c, 0x56001eec, 0x56001eec},
+	{0x0000a570, 0x7702b08c, 0x7702b08c, 0x56001eec, 0x56001eec},
+	{0x0000a574, 0x7702b08c, 0x7702b08c, 0x56001eec, 0x56001eec},
+	{0x0000a578, 0x7702b08c, 0x7702b08c, 0x56001eec, 0x56001eec},
+	{0x0000a57c, 0x7702b08c, 0x7702b08c, 0x56001eec, 0x56001eec},
 	{0x0000a580, 0x00800000, 0x00800000, 0x00800000, 0x00800000},
 	{0x0000a584, 0x06800003, 0x06800003, 0x04800002, 0x04800002},
 	{0x0000a588, 0x0a800020, 0x0a800020, 0x08800004, 0x08800004},
@@ -1083,14 +1166,36 @@ static const u32 ar9340Modes_mixed_ob_db_tx_gain_table_1p0[][5] = {
 	{0x0000a5f4, 0x778a308c, 0x778a308c, 0x56801eec, 0x56801eec},
 	{0x0000a5f8, 0x778a308c, 0x778a308c, 0x56801eec, 0x56801eec},
 	{0x0000a5fc, 0x778a308c, 0x778a308c, 0x56801eec, 0x56801eec},
+	{0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a60c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a610, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a614, 0x01404000, 0x01404000, 0x01404000, 0x01404000},
+	{0x0000a618, 0x01404501, 0x01404501, 0x01404501, 0x01404501},
+	{0x0000a61c, 0x02008802, 0x02008802, 0x02008501, 0x02008501},
+	{0x0000a620, 0x0300cc03, 0x0300cc03, 0x0280ca03, 0x0280ca03},
+	{0x0000a624, 0x0300cc03, 0x0300cc03, 0x03010c04, 0x03010c04},
+	{0x0000a628, 0x0300cc03, 0x0300cc03, 0x04014c04, 0x04014c04},
+	{0x0000a62c, 0x03810c03, 0x03810c03, 0x04015005, 0x04015005},
+	{0x0000a630, 0x03810e04, 0x03810e04, 0x04015005, 0x04015005},
+	{0x0000a634, 0x03810e04, 0x03810e04, 0x04015005, 0x04015005},
+	{0x0000a638, 0x03810e04, 0x03810e04, 0x04015005, 0x04015005},
+	{0x0000a63c, 0x03810e04, 0x03810e04, 0x04015005, 0x04015005},
+	{0x0000b2dc, 0x0380c7fc, 0x0380c7fc, 0x03aaa352, 0x03aaa352},
+	{0x0000b2e0, 0x0000f800, 0x0000f800, 0x03ccc584, 0x03ccc584},
+	{0x0000b2e4, 0x03ff0000, 0x03ff0000, 0x03f0f800, 0x03f0f800},
+	{0x0000b2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
 	{0x00016044, 0x056db2db, 0x056db2db, 0x03b6d2e4, 0x03b6d2e4},
-	{0x00016048, 0x24927266, 0x24927266, 0x8e483266, 0x8e483266},
+	{0x00016048, 0x24925666, 0x24925666, 0x8e481266, 0x8e481266},
+	{0x00016280, 0x01000015, 0x01000015, 0x01001015, 0x01001015},
+	{0x00016288, 0x30318000, 0x30318000, 0x00318000, 0x00318000},
 	{0x00016444, 0x056db2db, 0x056db2db, 0x03b6d2e4, 0x03b6d2e4},
-	{0x00016448, 0x24927266, 0x24927266, 0x8e482266, 0x8e482266},
+	{0x00016448, 0x24925666, 0x24925666, 0x8e481266, 0x8e481266},
 };
 
 static const u32 ar9340_1p0_mac_core[][2] = {
-	/*    Addr        allmodes        */
+	/* Addr      allmodes  */
 	{0x00000008, 0x00000000},
 	{0x00000030, 0x00020085},
 	{0x00000034, 0x00000005},
@@ -1119,6 +1224,7 @@ static const u32 ar9340_1p0_mac_core[][2] = {
 	{0x00008004, 0x00000000},
 	{0x00008008, 0x00000000},
 	{0x0000800c, 0x00000000},
+	{0x00008010, 0x00080800},
 	{0x00008018, 0x00000000},
 	{0x00008020, 0x00000000},
 	{0x00008038, 0x00000000},
@@ -1146,7 +1252,7 @@ static const u32 ar9340_1p0_mac_core[][2] = {
 	{0x000080bc, 0x00000000},
 	{0x000080c0, 0x2a800000},
 	{0x000080c4, 0x06900168},
-	{0x000080c8, 0x13881c20},
+	{0x000080c8, 0x13881c22},
 	{0x000080cc, 0x01f40000},
 	{0x000080d0, 0x00252500},
 	{0x000080d4, 0x00a00000},
@@ -1250,11 +1356,11 @@ static const u32 ar9340_1p0_mac_core[][2] = {
 	{0x000083c4, 0x00000000},
 	{0x000083c8, 0x00000000},
 	{0x000083cc, 0x00000200},
-	{0x000083d0, 0x000301ff},
+	{0x000083d0, 0x000101ff},
 };
 
 static const u32 ar9340Common_wo_xlna_rx_gain_table_1p0[][2] = {
-	/*    Addr        allmodes        */
+	/* Addr      allmodes  */
 	{0x0000a000, 0x00010000},
 	{0x0000a004, 0x00030002},
 	{0x0000a008, 0x00050004},
@@ -1514,12 +1620,11 @@ static const u32 ar9340Common_wo_xlna_rx_gain_table_1p0[][2] = {
 };
 
 static const u32 ar9340_1p0_soc_preamble[][2] = {
-	/*    Addr        allmodes        */
-	{0x000040a4, 0x00a0c1c9},
+	/* Addr      allmodes  */
 	{0x00007008, 0x00000000},
 	{0x00007020, 0x00000000},
 	{0x00007034, 0x00000002},
 	{0x00007038, 0x000004c2},
 };
 
-#endif
+#endif /* INITVALS_9340_H */
-- 
cgit v1.1


From 469979173ecda9c472c495608d6d540ec33ab85d Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Thu, 28 Jun 2012 02:33:41 +0200
Subject: ath9k: de-duplicate initvals

The initvals tool from https://github.com/mcgrof/qca-swiss-army-knife has
been modified to detect identical initval tables and replace them with
macros. This patch contains the generated changes.

On MIPS this reduces the binary size by 24 KB with no runtime changes.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 .../net/wireless/ath/ath9k/ar9003_2p2_initvals.h   |    1 +
 .../net/wireless/ath/ath9k/ar9330_1p1_initvals.h   |   53 +-
 .../net/wireless/ath/ath9k/ar9330_1p2_initvals.h   |  882 +----------
 drivers/net/wireless/ath/ath9k/ar9340_initvals.h   |  290 +---
 .../net/wireless/ath/ath9k/ar9462_2p0_initvals.h   |    5 +-
 drivers/net/wireless/ath/ath9k/ar9485_initvals.h   | 1528 ++++++++------------
 .../net/wireless/ath/ath9k/ar9580_1p0_initvals.h   |  772 +---------
 7 files changed, 652 insertions(+), 2879 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
index 952cb2b..89bf94d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2010-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2012 Qualcomm Atheros Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
diff --git a/drivers/net/wireless/ath/ath9k/ar9330_1p1_initvals.h b/drivers/net/wireless/ath/ath9k/ar9330_1p1_initvals.h
index 1bd3a3d..6e1756b 100644
--- a/drivers/net/wireless/ath/ath9k/ar9330_1p1_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9330_1p1_initvals.h
@@ -337,12 +337,7 @@ static const u32 ar9331_modes_low_ob_db_tx_gain_1p1[][5] = {
 	{0x00016284, 0x14d3f000, 0x14d3f000, 0x14d3f000, 0x14d3f000},
 };
 
-static const u32 ar9331_1p1_baseband_core_txfir_coeff_japan_2484[][2] = {
-	/* Addr      allmodes  */
-	{0x0000a398, 0x00000000},
-	{0x0000a39c, 0x6f7f0301},
-	{0x0000a3a0, 0xca9228ee},
-};
+#define ar9331_1p1_baseband_core_txfir_coeff_japan_2484 ar9462_2p0_baseband_core_txfir_coeff_japan_2484
 
 static const u32 ar9331_1p1_xtal_25M[][2] = {
 	/* Addr      allmodes  */
@@ -783,17 +778,7 @@ static const u32 ar9331_modes_high_power_tx_gain_1p1[][5] = {
 	{0x00016284, 0x14d3f000, 0x14d3f000, 0x14d3f000, 0x14d3f000},
 };
 
-static const u32 ar9331_1p1_mac_postamble[][5] = {
-	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
-	{0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160},
-	{0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c},
-	{0x000010b0, 0x00000e60, 0x00001cc0, 0x00007c70, 0x00003e38},
-	{0x00008014, 0x03e803e8, 0x07d007d0, 0x10801600, 0x08400b00},
-	{0x0000801c, 0x128d8027, 0x128d804f, 0x12e00057, 0x12e0002b},
-	{0x00008120, 0x08f04800, 0x08f04800, 0x08f04810, 0x08f04810},
-	{0x000081d0, 0x00003210, 0x00003210, 0x0000320a, 0x0000320a},
-	{0x00008318, 0x00003e80, 0x00007d00, 0x00006880, 0x00003440},
-};
+#define ar9331_1p1_mac_postamble ar9300_2p2_mac_postamble
 
 static const u32 ar9331_1p1_soc_preamble[][2] = {
 	/* Addr      allmodes  */
@@ -1112,38 +1097,4 @@ static const u32 ar9331_common_tx_gain_offset1_1[][1] = {
 	{0x00000000},
 };
 
-static const u32 ar9331_1p1_chansel_xtal_25M[] = {
-	0x0101479e,
-	0x0101d027,
-	0x010258af,
-	0x0102e138,
-	0x010369c0,
-	0x0103f249,
-	0x01047ad1,
-	0x0105035a,
-	0x01058be2,
-	0x0106146b,
-	0x01069cf3,
-	0x0107257c,
-	0x0107ae04,
-	0x0108f5b2,
-};
-
-static const u32 ar9331_1p1_chansel_xtal_40M[] = {
-	0x00a0ccbe,
-	0x00a12213,
-	0x00a17769,
-	0x00a1ccbe,
-	0x00a22213,
-	0x00a27769,
-	0x00a2ccbe,
-	0x00a32213,
-	0x00a37769,
-	0x00a3ccbe,
-	0x00a42213,
-	0x00a47769,
-	0x00a4ccbe,
-	0x00a5998b,
-};
-
 #endif /* INITVALS_9330_1P1_H */
diff --git a/drivers/net/wireless/ath/ath9k/ar9330_1p2_initvals.h b/drivers/net/wireless/ath/ath9k/ar9330_1p2_initvals.h
index 0e6ca08..57ed8a1 100644
--- a/drivers/net/wireless/ath/ath9k/ar9330_1p2_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9330_1p2_initvals.h
@@ -1,5 +1,6 @@
 /*
- * Copyright (c) 2011 Atheros Communications Inc.
+ * Copyright (c) 2010-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2012 Qualcomm Atheros Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -17,8 +18,8 @@
 #ifndef INITVALS_9330_1P2_H
 #define INITVALS_9330_1P2_H
 
-static const u32 ar9331_modes_lowest_ob_db_tx_gain_1p2[][5] = {
-	/*  Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20  */
+static const u32 ar9331_modes_high_ob_db_tx_gain_1p2[][5] = {
+	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
 	{0x0000a410, 0x000050d7, 0x000050d7, 0x000050d7, 0x000050d7},
 	{0x0000a500, 0x00022200, 0x00022200, 0x00000000, 0x00000000},
 	{0x0000a504, 0x05062002, 0x05062002, 0x04000002, 0x04000002},
@@ -102,8 +103,14 @@ static const u32 ar9331_modes_lowest_ob_db_tx_gain_1p2[][5] = {
 	{0x0000a63c, 0x04011004, 0x04011004, 0x04011004, 0x04011004},
 };
 
+#define ar9331_modes_high_power_tx_gain_1p2 ar9331_modes_high_ob_db_tx_gain_1p2
+
+#define ar9331_modes_low_ob_db_tx_gain_1p2 ar9331_modes_high_power_tx_gain_1p2
+
+#define ar9331_modes_lowest_ob_db_tx_gain_1p2 ar9331_modes_low_ob_db_tx_gain_1p2
+
 static const u32 ar9331_1p2_baseband_postamble[][5] = {
-	/*  Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20  */
+	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
 	{0x00009810, 0xd00a8005, 0xd00a8005, 0xd00a8005, 0xd00a8005},
 	{0x00009820, 0x206a002e, 0x206a002e, 0x206a002e, 0x206a002e},
 	{0x00009824, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0},
@@ -147,191 +154,6 @@ static const u32 ar9331_1p2_baseband_postamble[][5] = {
 	{0x0000ae18, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
 };
 
-static const u32 ar9331_modes_high_ob_db_tx_gain_1p2[][5] = {
-	/*  Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20  */
-	{0x0000a410, 0x000050d7, 0x000050d7, 0x000050d7, 0x000050d7},
-	{0x0000a500, 0x00022200, 0x00022200, 0x00000000, 0x00000000},
-	{0x0000a504, 0x05062002, 0x05062002, 0x04000002, 0x04000002},
-	{0x0000a508, 0x0c002e00, 0x0c002e00, 0x08000004, 0x08000004},
-	{0x0000a50c, 0x11062202, 0x11062202, 0x0d000200, 0x0d000200},
-	{0x0000a510, 0x17022e00, 0x17022e00, 0x11000202, 0x11000202},
-	{0x0000a514, 0x1d000ec2, 0x1d000ec2, 0x15000400, 0x15000400},
-	{0x0000a518, 0x25020ec0, 0x25020ec0, 0x19000402, 0x19000402},
-	{0x0000a51c, 0x2b020ec3, 0x2b020ec3, 0x1d000404, 0x1d000404},
-	{0x0000a520, 0x2f001f04, 0x2f001f04, 0x23000a00, 0x23000a00},
-	{0x0000a524, 0x35001fc4, 0x35001fc4, 0x27000a02, 0x27000a02},
-	{0x0000a528, 0x3c022f04, 0x3c022f04, 0x2b000a04, 0x2b000a04},
-	{0x0000a52c, 0x41023e85, 0x41023e85, 0x3f001620, 0x3f001620},
-	{0x0000a530, 0x48023ec6, 0x48023ec6, 0x41001621, 0x41001621},
-	{0x0000a534, 0x4d023f01, 0x4d023f01, 0x44001640, 0x44001640},
-	{0x0000a538, 0x53023f4b, 0x53023f4b, 0x46001641, 0x46001641},
-	{0x0000a53c, 0x5a027f09, 0x5a027f09, 0x48001642, 0x48001642},
-	{0x0000a540, 0x5f027fc9, 0x5f027fc9, 0x4b001644, 0x4b001644},
-	{0x0000a544, 0x6502feca, 0x6502feca, 0x4e001a81, 0x4e001a81},
-	{0x0000a548, 0x6b02ff4a, 0x6b02ff4a, 0x51001a83, 0x51001a83},
-	{0x0000a54c, 0x7203feca, 0x7203feca, 0x54001c84, 0x54001c84},
-	{0x0000a550, 0x7703ff0b, 0x7703ff0b, 0x57001ce3, 0x57001ce3},
-	{0x0000a554, 0x7d06ffcb, 0x7d06ffcb, 0x5b001ce5, 0x5b001ce5},
-	{0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x5f001ce9, 0x5f001ce9},
-	{0x0000a55c, 0x8907ffcb, 0x8907ffcb, 0x66001eec, 0x66001eec},
-	{0x0000a560, 0x900fff0b, 0x900fff0b, 0x66001eec, 0x66001eec},
-	{0x0000a564, 0x960fffcb, 0x960fffcb, 0x66001eec, 0x66001eec},
-	{0x0000a568, 0x9c1fff0b, 0x9c1fff0b, 0x66001eec, 0x66001eec},
-	{0x0000a56c, 0x9c1fff0b, 0x9c1fff0b, 0x66001eec, 0x66001eec},
-	{0x0000a570, 0x9c1fff0b, 0x9c1fff0b, 0x66001eec, 0x66001eec},
-	{0x0000a574, 0x9c1fff0b, 0x9c1fff0b, 0x66001eec, 0x66001eec},
-	{0x0000a578, 0x9c1fff0b, 0x9c1fff0b, 0x66001eec, 0x66001eec},
-	{0x0000a57c, 0x9c1fff0b, 0x9c1fff0b, 0x66001eec, 0x66001eec},
-	{0x0000a580, 0x00022200, 0x00022200, 0x00000000, 0x00000000},
-	{0x0000a584, 0x05062002, 0x05062002, 0x04000002, 0x04000002},
-	{0x0000a588, 0x0c002e00, 0x0c002e00, 0x08000004, 0x08000004},
-	{0x0000a58c, 0x11062202, 0x11062202, 0x0b000200, 0x0b000200},
-	{0x0000a590, 0x17022e00, 0x17022e00, 0x0f000202, 0x0f000202},
-	{0x0000a594, 0x1d000ec2, 0x1d000ec2, 0x11000400, 0x11000400},
-	{0x0000a598, 0x25020ec0, 0x25020ec0, 0x15000402, 0x15000402},
-	{0x0000a59c, 0x2b020ec3, 0x2b020ec3, 0x19000404, 0x19000404},
-	{0x0000a5a0, 0x2f001f04, 0x2f001f04, 0x1b000603, 0x1b000603},
-	{0x0000a5a4, 0x35001fc4, 0x35001fc4, 0x1f000a02, 0x1f000a02},
-	{0x0000a5a8, 0x3c022f04, 0x3c022f04, 0x23000a04, 0x23000a04},
-	{0x0000a5ac, 0x41023e85, 0x41023e85, 0x26000a20, 0x26000a20},
-	{0x0000a5b0, 0x48023ec6, 0x48023ec6, 0x2a000e20, 0x2a000e20},
-	{0x0000a5b4, 0x4d023f01, 0x4d023f01, 0x2e000e22, 0x2e000e22},
-	{0x0000a5b8, 0x53023f4b, 0x53023f4b, 0x31000e24, 0x31000e24},
-	{0x0000a5bc, 0x5a027f09, 0x5a027f09, 0x34001640, 0x34001640},
-	{0x0000a5c0, 0x5f027fc9, 0x5f027fc9, 0x38001660, 0x38001660},
-	{0x0000a5c4, 0x6502feca, 0x6502feca, 0x3b001861, 0x3b001861},
-	{0x0000a5c8, 0x6b02ff4a, 0x6b02ff4a, 0x3e001a81, 0x3e001a81},
-	{0x0000a5cc, 0x7203feca, 0x7203feca, 0x42001a83, 0x42001a83},
-	{0x0000a5d0, 0x7703ff0b, 0x7703ff0b, 0x44001c84, 0x44001c84},
-	{0x0000a5d4, 0x7d06ffcb, 0x7d06ffcb, 0x48001ce3, 0x48001ce3},
-	{0x0000a5d8, 0x8407ff0b, 0x8407ff0b, 0x4c001ce5, 0x4c001ce5},
-	{0x0000a5dc, 0x8907ffcb, 0x8907ffcb, 0x50001ce9, 0x50001ce9},
-	{0x0000a5e0, 0x900fff0b, 0x900fff0b, 0x54001ceb, 0x54001ceb},
-	{0x0000a5e4, 0x960fffcb, 0x960fffcb, 0x56001eec, 0x56001eec},
-	{0x0000a5e8, 0x9c1fff0b, 0x9c1fff0b, 0x56001eec, 0x56001eec},
-	{0x0000a5ec, 0x9c1fff0b, 0x9c1fff0b, 0x56001eec, 0x56001eec},
-	{0x0000a5f0, 0x9c1fff0b, 0x9c1fff0b, 0x56001eec, 0x56001eec},
-	{0x0000a5f4, 0x9c1fff0b, 0x9c1fff0b, 0x56001eec, 0x56001eec},
-	{0x0000a5f8, 0x9c1fff0b, 0x9c1fff0b, 0x56001eec, 0x56001eec},
-	{0x0000a5fc, 0x9c1fff0b, 0x9c1fff0b, 0x56001eec, 0x56001eec},
-	{0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a60c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a610, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a614, 0x01404000, 0x01404000, 0x01404000, 0x01404000},
-	{0x0000a618, 0x02008501, 0x02008501, 0x02008501, 0x02008501},
-	{0x0000a61c, 0x02008802, 0x02008802, 0x02008802, 0x02008802},
-	{0x0000a620, 0x0300c802, 0x0300c802, 0x0300c802, 0x0300c802},
-	{0x0000a624, 0x0300cc03, 0x0300cc03, 0x0300cc03, 0x0300cc03},
-	{0x0000a628, 0x04011004, 0x04011004, 0x04011004, 0x04011004},
-	{0x0000a62c, 0x04011004, 0x04011004, 0x04011004, 0x04011004},
-	{0x0000a630, 0x04011004, 0x04011004, 0x04011004, 0x04011004},
-	{0x0000a634, 0x04011004, 0x04011004, 0x04011004, 0x04011004},
-	{0x0000a638, 0x04011004, 0x04011004, 0x04011004, 0x04011004},
-	{0x0000a63c, 0x04011004, 0x04011004, 0x04011004, 0x04011004},
-};
-
-static const u32 ar9331_modes_low_ob_db_tx_gain_1p2[][5] = {
-	/*  Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20  */
-	{0x0000a410, 0x000050d7, 0x000050d7, 0x000050d7, 0x000050d7},
-	{0x0000a500, 0x00022200, 0x00022200, 0x00000000, 0x00000000},
-	{0x0000a504, 0x05062002, 0x05062002, 0x04000002, 0x04000002},
-	{0x0000a508, 0x0c002e00, 0x0c002e00, 0x08000004, 0x08000004},
-	{0x0000a50c, 0x11062202, 0x11062202, 0x0d000200, 0x0d000200},
-	{0x0000a510, 0x17022e00, 0x17022e00, 0x11000202, 0x11000202},
-	{0x0000a514, 0x1d000ec2, 0x1d000ec2, 0x15000400, 0x15000400},
-	{0x0000a518, 0x25020ec0, 0x25020ec0, 0x19000402, 0x19000402},
-	{0x0000a51c, 0x2b020ec3, 0x2b020ec3, 0x1d000404, 0x1d000404},
-	{0x0000a520, 0x2f001f04, 0x2f001f04, 0x23000a00, 0x23000a00},
-	{0x0000a524, 0x35001fc4, 0x35001fc4, 0x27000a02, 0x27000a02},
-	{0x0000a528, 0x3c022f04, 0x3c022f04, 0x2b000a04, 0x2b000a04},
-	{0x0000a52c, 0x41023e85, 0x41023e85, 0x3f001620, 0x3f001620},
-	{0x0000a530, 0x48023ec6, 0x48023ec6, 0x41001621, 0x41001621},
-	{0x0000a534, 0x4d023f01, 0x4d023f01, 0x44001640, 0x44001640},
-	{0x0000a538, 0x53023f4b, 0x53023f4b, 0x46001641, 0x46001641},
-	{0x0000a53c, 0x5a027f09, 0x5a027f09, 0x48001642, 0x48001642},
-	{0x0000a540, 0x5f027fc9, 0x5f027fc9, 0x4b001644, 0x4b001644},
-	{0x0000a544, 0x6502feca, 0x6502feca, 0x4e001a81, 0x4e001a81},
-	{0x0000a548, 0x6b02ff4a, 0x6b02ff4a, 0x51001a83, 0x51001a83},
-	{0x0000a54c, 0x7203feca, 0x7203feca, 0x54001c84, 0x54001c84},
-	{0x0000a550, 0x7703ff0b, 0x7703ff0b, 0x57001ce3, 0x57001ce3},
-	{0x0000a554, 0x7d06ffcb, 0x7d06ffcb, 0x5b001ce5, 0x5b001ce5},
-	{0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x5f001ce9, 0x5f001ce9},
-	{0x0000a55c, 0x8907ffcb, 0x8907ffcb, 0x66001eec, 0x66001eec},
-	{0x0000a560, 0x900fff0b, 0x900fff0b, 0x66001eec, 0x66001eec},
-	{0x0000a564, 0x960fffcb, 0x960fffcb, 0x66001eec, 0x66001eec},
-	{0x0000a568, 0x9c1fff0b, 0x9c1fff0b, 0x66001eec, 0x66001eec},
-	{0x0000a56c, 0x9c1fff0b, 0x9c1fff0b, 0x66001eec, 0x66001eec},
-	{0x0000a570, 0x9c1fff0b, 0x9c1fff0b, 0x66001eec, 0x66001eec},
-	{0x0000a574, 0x9c1fff0b, 0x9c1fff0b, 0x66001eec, 0x66001eec},
-	{0x0000a578, 0x9c1fff0b, 0x9c1fff0b, 0x66001eec, 0x66001eec},
-	{0x0000a57c, 0x9c1fff0b, 0x9c1fff0b, 0x66001eec, 0x66001eec},
-	{0x0000a580, 0x00022200, 0x00022200, 0x00000000, 0x00000000},
-	{0x0000a584, 0x05062002, 0x05062002, 0x04000002, 0x04000002},
-	{0x0000a588, 0x0c002e00, 0x0c002e00, 0x08000004, 0x08000004},
-	{0x0000a58c, 0x11062202, 0x11062202, 0x0b000200, 0x0b000200},
-	{0x0000a590, 0x17022e00, 0x17022e00, 0x0f000202, 0x0f000202},
-	{0x0000a594, 0x1d000ec2, 0x1d000ec2, 0x11000400, 0x11000400},
-	{0x0000a598, 0x25020ec0, 0x25020ec0, 0x15000402, 0x15000402},
-	{0x0000a59c, 0x2b020ec3, 0x2b020ec3, 0x19000404, 0x19000404},
-	{0x0000a5a0, 0x2f001f04, 0x2f001f04, 0x1b000603, 0x1b000603},
-	{0x0000a5a4, 0x35001fc4, 0x35001fc4, 0x1f000a02, 0x1f000a02},
-	{0x0000a5a8, 0x3c022f04, 0x3c022f04, 0x23000a04, 0x23000a04},
-	{0x0000a5ac, 0x41023e85, 0x41023e85, 0x26000a20, 0x26000a20},
-	{0x0000a5b0, 0x48023ec6, 0x48023ec6, 0x2a000e20, 0x2a000e20},
-	{0x0000a5b4, 0x4d023f01, 0x4d023f01, 0x2e000e22, 0x2e000e22},
-	{0x0000a5b8, 0x53023f4b, 0x53023f4b, 0x31000e24, 0x31000e24},
-	{0x0000a5bc, 0x5a027f09, 0x5a027f09, 0x34001640, 0x34001640},
-	{0x0000a5c0, 0x5f027fc9, 0x5f027fc9, 0x38001660, 0x38001660},
-	{0x0000a5c4, 0x6502feca, 0x6502feca, 0x3b001861, 0x3b001861},
-	{0x0000a5c8, 0x6b02ff4a, 0x6b02ff4a, 0x3e001a81, 0x3e001a81},
-	{0x0000a5cc, 0x7203feca, 0x7203feca, 0x42001a83, 0x42001a83},
-	{0x0000a5d0, 0x7703ff0b, 0x7703ff0b, 0x44001c84, 0x44001c84},
-	{0x0000a5d4, 0x7d06ffcb, 0x7d06ffcb, 0x48001ce3, 0x48001ce3},
-	{0x0000a5d8, 0x8407ff0b, 0x8407ff0b, 0x4c001ce5, 0x4c001ce5},
-	{0x0000a5dc, 0x8907ffcb, 0x8907ffcb, 0x50001ce9, 0x50001ce9},
-	{0x0000a5e0, 0x900fff0b, 0x900fff0b, 0x54001ceb, 0x54001ceb},
-	{0x0000a5e4, 0x960fffcb, 0x960fffcb, 0x56001eec, 0x56001eec},
-	{0x0000a5e8, 0x9c1fff0b, 0x9c1fff0b, 0x56001eec, 0x56001eec},
-	{0x0000a5ec, 0x9c1fff0b, 0x9c1fff0b, 0x56001eec, 0x56001eec},
-	{0x0000a5f0, 0x9c1fff0b, 0x9c1fff0b, 0x56001eec, 0x56001eec},
-	{0x0000a5f4, 0x9c1fff0b, 0x9c1fff0b, 0x56001eec, 0x56001eec},
-	{0x0000a5f8, 0x9c1fff0b, 0x9c1fff0b, 0x56001eec, 0x56001eec},
-	{0x0000a5fc, 0x9c1fff0b, 0x9c1fff0b, 0x56001eec, 0x56001eec},
-	{0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a60c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a610, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a614, 0x01404000, 0x01404000, 0x01404000, 0x01404000},
-	{0x0000a618, 0x02008501, 0x02008501, 0x02008501, 0x02008501},
-	{0x0000a61c, 0x02008802, 0x02008802, 0x02008802, 0x02008802},
-	{0x0000a620, 0x0300c802, 0x0300c802, 0x0300c802, 0x0300c802},
-	{0x0000a624, 0x0300cc03, 0x0300cc03, 0x0300cc03, 0x0300cc03},
-	{0x0000a628, 0x04011004, 0x04011004, 0x04011004, 0x04011004},
-	{0x0000a62c, 0x04011004, 0x04011004, 0x04011004, 0x04011004},
-	{0x0000a630, 0x04011004, 0x04011004, 0x04011004, 0x04011004},
-	{0x0000a634, 0x04011004, 0x04011004, 0x04011004, 0x04011004},
-	{0x0000a638, 0x04011004, 0x04011004, 0x04011004, 0x04011004},
-	{0x0000a63c, 0x04011004, 0x04011004, 0x04011004, 0x04011004},
-};
-
-static const u32 ar9331_1p2_baseband_core_txfir_coeff_japan_2484[][2] = {
-	/* Addr      allmodes  */
-	{0x0000a398, 0x00000000},
-	{0x0000a39c, 0x6f7f0301},
-	{0x0000a3a0, 0xca9228ee},
-};
-
-static const u32 ar9331_1p2_xtal_25M[][2] = {
-	/* Addr      allmodes  */
-	{0x00007038, 0x000002f8},
-	{0x00008244, 0x0010f3d7},
-	{0x0000824c, 0x0001e7ae},
-	{0x0001609c, 0x0f508f29},
-};
-
 static const u32 ar9331_1p2_radio_core[][2] = {
 	/* Addr      allmodes  */
 	{0x00016000, 0x36db6db6},
@@ -397,684 +219,24 @@ static const u32 ar9331_1p2_radio_core[][2] = {
 	{0x000163d4, 0x00000000},
 };
 
-static const u32 ar9331_1p2_soc_postamble[][5] = {
-	/*  Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20  */
-	{0x00007010, 0x00000022, 0x00000022, 0x00000022, 0x00000022},
-};
+#define ar9331_1p2_baseband_core_txfir_coeff_japan_2484 ar9331_1p1_baseband_core_txfir_coeff_japan_2484
 
-static const u32 ar9331_common_wo_xlna_rx_gain_1p2[][2] = {
-	/* Addr      allmodes  */
-	{0x0000a000, 0x00060005},
-	{0x0000a004, 0x00810080},
-	{0x0000a008, 0x00830082},
-	{0x0000a00c, 0x00850084},
-	{0x0000a010, 0x01820181},
-	{0x0000a014, 0x01840183},
-	{0x0000a018, 0x01880185},
-	{0x0000a01c, 0x018a0189},
-	{0x0000a020, 0x02850284},
-	{0x0000a024, 0x02890288},
-	{0x0000a028, 0x028b028a},
-	{0x0000a02c, 0x03850384},
-	{0x0000a030, 0x03890388},
-	{0x0000a034, 0x038b038a},
-	{0x0000a038, 0x038d038c},
-	{0x0000a03c, 0x03910390},
-	{0x0000a040, 0x03930392},
-	{0x0000a044, 0x03950394},
-	{0x0000a048, 0x00000396},
-	{0x0000a04c, 0x00000000},
-	{0x0000a050, 0x00000000},
-	{0x0000a054, 0x00000000},
-	{0x0000a058, 0x00000000},
-	{0x0000a05c, 0x00000000},
-	{0x0000a060, 0x00000000},
-	{0x0000a064, 0x00000000},
-	{0x0000a068, 0x00000000},
-	{0x0000a06c, 0x00000000},
-	{0x0000a070, 0x00000000},
-	{0x0000a074, 0x00000000},
-	{0x0000a078, 0x00000000},
-	{0x0000a07c, 0x00000000},
-	{0x0000a080, 0x28282828},
-	{0x0000a084, 0x28282828},
-	{0x0000a088, 0x28282828},
-	{0x0000a08c, 0x28282828},
-	{0x0000a090, 0x28282828},
-	{0x0000a094, 0x24242428},
-	{0x0000a098, 0x171e1e1e},
-	{0x0000a09c, 0x02020b0b},
-	{0x0000a0a0, 0x02020202},
-	{0x0000a0a4, 0x00000000},
-	{0x0000a0a8, 0x00000000},
-	{0x0000a0ac, 0x00000000},
-	{0x0000a0b0, 0x00000000},
-	{0x0000a0b4, 0x00000000},
-	{0x0000a0b8, 0x00000000},
-	{0x0000a0bc, 0x00000000},
-	{0x0000a0c0, 0x22072208},
-	{0x0000a0c4, 0x22052206},
-	{0x0000a0c8, 0x22032204},
-	{0x0000a0cc, 0x22012202},
-	{0x0000a0d0, 0x221f2200},
-	{0x0000a0d4, 0x221d221e},
-	{0x0000a0d8, 0x33023303},
-	{0x0000a0dc, 0x33003301},
-	{0x0000a0e0, 0x331e331f},
-	{0x0000a0e4, 0x4402331d},
-	{0x0000a0e8, 0x44004401},
-	{0x0000a0ec, 0x441e441f},
-	{0x0000a0f0, 0x55025503},
-	{0x0000a0f4, 0x55005501},
-	{0x0000a0f8, 0x551e551f},
-	{0x0000a0fc, 0x6602551d},
-	{0x0000a100, 0x66006601},
-	{0x0000a104, 0x661e661f},
-	{0x0000a108, 0x7703661d},
-	{0x0000a10c, 0x77017702},
-	{0x0000a110, 0x00007700},
-	{0x0000a114, 0x00000000},
-	{0x0000a118, 0x00000000},
-	{0x0000a11c, 0x00000000},
-	{0x0000a120, 0x00000000},
-	{0x0000a124, 0x00000000},
-	{0x0000a128, 0x00000000},
-	{0x0000a12c, 0x00000000},
-	{0x0000a130, 0x00000000},
-	{0x0000a134, 0x00000000},
-	{0x0000a138, 0x00000000},
-	{0x0000a13c, 0x00000000},
-	{0x0000a140, 0x001f0000},
-	{0x0000a144, 0x111f1100},
-	{0x0000a148, 0x111d111e},
-	{0x0000a14c, 0x111b111c},
-	{0x0000a150, 0x22032204},
-	{0x0000a154, 0x22012202},
-	{0x0000a158, 0x221f2200},
-	{0x0000a15c, 0x221d221e},
-	{0x0000a160, 0x33013302},
-	{0x0000a164, 0x331f3300},
-	{0x0000a168, 0x4402331e},
-	{0x0000a16c, 0x44004401},
-	{0x0000a170, 0x441e441f},
-	{0x0000a174, 0x55015502},
-	{0x0000a178, 0x551f5500},
-	{0x0000a17c, 0x6602551e},
-	{0x0000a180, 0x66006601},
-	{0x0000a184, 0x661e661f},
-	{0x0000a188, 0x7703661d},
-	{0x0000a18c, 0x77017702},
-	{0x0000a190, 0x00007700},
-	{0x0000a194, 0x00000000},
-	{0x0000a198, 0x00000000},
-	{0x0000a19c, 0x00000000},
-	{0x0000a1a0, 0x00000000},
-	{0x0000a1a4, 0x00000000},
-	{0x0000a1a8, 0x00000000},
-	{0x0000a1ac, 0x00000000},
-	{0x0000a1b0, 0x00000000},
-	{0x0000a1b4, 0x00000000},
-	{0x0000a1b8, 0x00000000},
-	{0x0000a1bc, 0x00000000},
-	{0x0000a1c0, 0x00000000},
-	{0x0000a1c4, 0x00000000},
-	{0x0000a1c8, 0x00000000},
-	{0x0000a1cc, 0x00000000},
-	{0x0000a1d0, 0x00000000},
-	{0x0000a1d4, 0x00000000},
-	{0x0000a1d8, 0x00000000},
-	{0x0000a1dc, 0x00000000},
-	{0x0000a1e0, 0x00000000},
-	{0x0000a1e4, 0x00000000},
-	{0x0000a1e8, 0x00000000},
-	{0x0000a1ec, 0x00000000},
-	{0x0000a1f0, 0x00000396},
-	{0x0000a1f4, 0x00000396},
-	{0x0000a1f8, 0x00000396},
-	{0x0000a1fc, 0x00000296},
-};
+#define ar9331_1p2_xtal_25M ar9331_1p1_xtal_25M
 
-static const u32 ar9331_1p2_baseband_core[][2] = {
-	/* Addr      allmodes  */
-	{0x00009800, 0xafe68e30},
-	{0x00009804, 0xfd14e000},
-	{0x00009808, 0x9c0a8f6b},
-	{0x0000980c, 0x04800000},
-	{0x00009814, 0x9280c00a},
-	{0x00009818, 0x00000000},
-	{0x0000981c, 0x00020028},
-	{0x00009834, 0x5f3ca3de},
-	{0x00009838, 0x0108ecff},
-	{0x0000983c, 0x14750600},
-	{0x00009880, 0x201fff00},
-	{0x00009884, 0x00001042},
-	{0x000098a4, 0x00200400},
-	{0x000098b0, 0x32840bbe},
-	{0x000098d0, 0x004b6a8e},
-	{0x000098d4, 0x00000820},
-	{0x000098dc, 0x00000000},
-	{0x000098f0, 0x00000000},
-	{0x000098f4, 0x00000000},
-	{0x00009c04, 0x00000000},
-	{0x00009c08, 0x03200000},
-	{0x00009c0c, 0x00000000},
-	{0x00009c10, 0x00000000},
-	{0x00009c14, 0x00046384},
-	{0x00009c18, 0x05b6b440},
-	{0x00009c1c, 0x00b6b440},
-	{0x00009d00, 0xc080a333},
-	{0x00009d04, 0x40206c10},
-	{0x00009d08, 0x009c4060},
-	{0x00009d0c, 0x1883800a},
-	{0x00009d10, 0x01834061},
-	{0x00009d14, 0x00c00400},
-	{0x00009d18, 0x00000000},
-	{0x00009e08, 0x0038233c},
-	{0x00009e24, 0x9927b515},
-	{0x00009e28, 0x12ef0200},
-	{0x00009e30, 0x06336f77},
-	{0x00009e34, 0x6af6532f},
-	{0x00009e38, 0x0cc80c00},
-	{0x00009e40, 0x0d261820},
-	{0x00009e4c, 0x00001004},
-	{0x00009e50, 0x00ff03f1},
-	{0x00009fc0, 0x803e4788},
-	{0x00009fc4, 0x0001efb5},
-	{0x00009fcc, 0x40000014},
-	{0x0000a20c, 0x00000000},
-	{0x0000a220, 0x00000000},
-	{0x0000a224, 0x00000000},
-	{0x0000a228, 0x10002310},
-	{0x0000a23c, 0x00000000},
-	{0x0000a244, 0x0c000000},
-	{0x0000a2a0, 0x00000001},
-	{0x0000a2c0, 0x00000001},
-	{0x0000a2c8, 0x00000000},
-	{0x0000a2cc, 0x18c43433},
-	{0x0000a2d4, 0x00000000},
-	{0x0000a2dc, 0x00000000},
-	{0x0000a2e0, 0x00000000},
-	{0x0000a2e4, 0x00000000},
-	{0x0000a2e8, 0x00000000},
-	{0x0000a2ec, 0x00000000},
-	{0x0000a2f0, 0x00000000},
-	{0x0000a2f4, 0x00000000},
-	{0x0000a2f8, 0x00000000},
-	{0x0000a344, 0x00000000},
-	{0x0000a34c, 0x00000000},
-	{0x0000a350, 0x0000a000},
-	{0x0000a364, 0x00000000},
-	{0x0000a370, 0x00000000},
-	{0x0000a390, 0x00000001},
-	{0x0000a394, 0x00000444},
-	{0x0000a398, 0x001f0e0f},
-	{0x0000a39c, 0x0075393f},
-	{0x0000a3a0, 0xb79f6427},
-	{0x0000a3a4, 0x00000000},
-	{0x0000a3a8, 0xaaaaaaaa},
-	{0x0000a3ac, 0x3c466478},
-	{0x0000a3c0, 0x20202020},
-	{0x0000a3c4, 0x22222220},
-	{0x0000a3c8, 0x20200020},
-	{0x0000a3cc, 0x20202020},
-	{0x0000a3d0, 0x20202020},
-	{0x0000a3d4, 0x20202020},
-	{0x0000a3d8, 0x20202020},
-	{0x0000a3dc, 0x20202020},
-	{0x0000a3e0, 0x20202020},
-	{0x0000a3e4, 0x20202020},
-	{0x0000a3e8, 0x20202020},
-	{0x0000a3ec, 0x20202020},
-	{0x0000a3f0, 0x00000000},
-	{0x0000a3f4, 0x00000006},
-	{0x0000a3f8, 0x0cdbd380},
-	{0x0000a3fc, 0x000f0f01},
-	{0x0000a400, 0x8fa91f01},
-	{0x0000a404, 0x00000000},
-	{0x0000a408, 0x0e79e5c6},
-	{0x0000a40c, 0x00820820},
-	{0x0000a414, 0x1ce739ce},
-	{0x0000a418, 0x2d001dce},
-	{0x0000a41c, 0x1ce739ce},
-	{0x0000a420, 0x000001ce},
-	{0x0000a424, 0x1ce739ce},
-	{0x0000a428, 0x000001ce},
-	{0x0000a42c, 0x1ce739ce},
-	{0x0000a430, 0x1ce739ce},
-	{0x0000a434, 0x00000000},
-	{0x0000a438, 0x00001801},
-	{0x0000a43c, 0x00000000},
-	{0x0000a440, 0x00000000},
-	{0x0000a444, 0x00000000},
-	{0x0000a448, 0x04000000},
-	{0x0000a44c, 0x00000001},
-	{0x0000a450, 0x00010000},
-	{0x0000a458, 0x00000000},
-	{0x0000a640, 0x00000000},
-	{0x0000a644, 0x3fad9d74},
-	{0x0000a648, 0x0048060a},
-	{0x0000a64c, 0x00003c37},
-	{0x0000a670, 0x03020100},
-	{0x0000a674, 0x09080504},
-	{0x0000a678, 0x0d0c0b0a},
-	{0x0000a67c, 0x13121110},
-	{0x0000a680, 0x31301514},
-	{0x0000a684, 0x35343332},
-	{0x0000a688, 0x00000036},
-	{0x0000a690, 0x00000838},
-	{0x0000a7c0, 0x00000000},
-	{0x0000a7c4, 0xfffffffc},
-	{0x0000a7c8, 0x00000000},
-	{0x0000a7cc, 0x00000000},
-	{0x0000a7d0, 0x00000000},
-	{0x0000a7d4, 0x00000004},
-	{0x0000a7dc, 0x00000001},
-};
+#define ar9331_1p2_xtal_40M ar9331_1p1_xtal_40M
 
-static const u32 ar9331_modes_high_power_tx_gain_1p2[][5] = {
-	/*  Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20  */
-	{0x0000a410, 0x000050d7, 0x000050d7, 0x000050d7, 0x000050d7},
-	{0x0000a500, 0x00022200, 0x00022200, 0x00000000, 0x00000000},
-	{0x0000a504, 0x05062002, 0x05062002, 0x04000002, 0x04000002},
-	{0x0000a508, 0x0c002e00, 0x0c002e00, 0x08000004, 0x08000004},
-	{0x0000a50c, 0x11062202, 0x11062202, 0x0d000200, 0x0d000200},
-	{0x0000a510, 0x17022e00, 0x17022e00, 0x11000202, 0x11000202},
-	{0x0000a514, 0x1d000ec2, 0x1d000ec2, 0x15000400, 0x15000400},
-	{0x0000a518, 0x25020ec0, 0x25020ec0, 0x19000402, 0x19000402},
-	{0x0000a51c, 0x2b020ec3, 0x2b020ec3, 0x1d000404, 0x1d000404},
-	{0x0000a520, 0x2f001f04, 0x2f001f04, 0x23000a00, 0x23000a00},
-	{0x0000a524, 0x35001fc4, 0x35001fc4, 0x27000a02, 0x27000a02},
-	{0x0000a528, 0x3c022f04, 0x3c022f04, 0x2b000a04, 0x2b000a04},
-	{0x0000a52c, 0x41023e85, 0x41023e85, 0x3f001620, 0x3f001620},
-	{0x0000a530, 0x48023ec6, 0x48023ec6, 0x41001621, 0x41001621},
-	{0x0000a534, 0x4d023f01, 0x4d023f01, 0x44001640, 0x44001640},
-	{0x0000a538, 0x53023f4b, 0x53023f4b, 0x46001641, 0x46001641},
-	{0x0000a53c, 0x5a027f09, 0x5a027f09, 0x48001642, 0x48001642},
-	{0x0000a540, 0x5f027fc9, 0x5f027fc9, 0x4b001644, 0x4b001644},
-	{0x0000a544, 0x6502feca, 0x6502feca, 0x4e001a81, 0x4e001a81},
-	{0x0000a548, 0x6b02ff4a, 0x6b02ff4a, 0x51001a83, 0x51001a83},
-	{0x0000a54c, 0x7203feca, 0x7203feca, 0x54001c84, 0x54001c84},
-	{0x0000a550, 0x7703ff0b, 0x7703ff0b, 0x57001ce3, 0x57001ce3},
-	{0x0000a554, 0x7d06ffcb, 0x7d06ffcb, 0x5b001ce5, 0x5b001ce5},
-	{0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x5f001ce9, 0x5f001ce9},
-	{0x0000a55c, 0x8907ffcb, 0x8907ffcb, 0x66001eec, 0x66001eec},
-	{0x0000a560, 0x900fff0b, 0x900fff0b, 0x66001eec, 0x66001eec},
-	{0x0000a564, 0x960fffcb, 0x960fffcb, 0x66001eec, 0x66001eec},
-	{0x0000a568, 0x9c1fff0b, 0x9c1fff0b, 0x66001eec, 0x66001eec},
-	{0x0000a56c, 0x9c1fff0b, 0x9c1fff0b, 0x66001eec, 0x66001eec},
-	{0x0000a570, 0x9c1fff0b, 0x9c1fff0b, 0x66001eec, 0x66001eec},
-	{0x0000a574, 0x9c1fff0b, 0x9c1fff0b, 0x66001eec, 0x66001eec},
-	{0x0000a578, 0x9c1fff0b, 0x9c1fff0b, 0x66001eec, 0x66001eec},
-	{0x0000a57c, 0x9c1fff0b, 0x9c1fff0b, 0x66001eec, 0x66001eec},
-	{0x0000a580, 0x00022200, 0x00022200, 0x00000000, 0x00000000},
-	{0x0000a584, 0x05062002, 0x05062002, 0x04000002, 0x04000002},
-	{0x0000a588, 0x0c002e00, 0x0c002e00, 0x08000004, 0x08000004},
-	{0x0000a58c, 0x11062202, 0x11062202, 0x0b000200, 0x0b000200},
-	{0x0000a590, 0x17022e00, 0x17022e00, 0x0f000202, 0x0f000202},
-	{0x0000a594, 0x1d000ec2, 0x1d000ec2, 0x11000400, 0x11000400},
-	{0x0000a598, 0x25020ec0, 0x25020ec0, 0x15000402, 0x15000402},
-	{0x0000a59c, 0x2b020ec3, 0x2b020ec3, 0x19000404, 0x19000404},
-	{0x0000a5a0, 0x2f001f04, 0x2f001f04, 0x1b000603, 0x1b000603},
-	{0x0000a5a4, 0x35001fc4, 0x35001fc4, 0x1f000a02, 0x1f000a02},
-	{0x0000a5a8, 0x3c022f04, 0x3c022f04, 0x23000a04, 0x23000a04},
-	{0x0000a5ac, 0x41023e85, 0x41023e85, 0x26000a20, 0x26000a20},
-	{0x0000a5b0, 0x48023ec6, 0x48023ec6, 0x2a000e20, 0x2a000e20},
-	{0x0000a5b4, 0x4d023f01, 0x4d023f01, 0x2e000e22, 0x2e000e22},
-	{0x0000a5b8, 0x53023f4b, 0x53023f4b, 0x31000e24, 0x31000e24},
-	{0x0000a5bc, 0x5a027f09, 0x5a027f09, 0x34001640, 0x34001640},
-	{0x0000a5c0, 0x5f027fc9, 0x5f027fc9, 0x38001660, 0x38001660},
-	{0x0000a5c4, 0x6502feca, 0x6502feca, 0x3b001861, 0x3b001861},
-	{0x0000a5c8, 0x6b02ff4a, 0x6b02ff4a, 0x3e001a81, 0x3e001a81},
-	{0x0000a5cc, 0x7203feca, 0x7203feca, 0x42001a83, 0x42001a83},
-	{0x0000a5d0, 0x7703ff0b, 0x7703ff0b, 0x44001c84, 0x44001c84},
-	{0x0000a5d4, 0x7d06ffcb, 0x7d06ffcb, 0x48001ce3, 0x48001ce3},
-	{0x0000a5d8, 0x8407ff0b, 0x8407ff0b, 0x4c001ce5, 0x4c001ce5},
-	{0x0000a5dc, 0x8907ffcb, 0x8907ffcb, 0x50001ce9, 0x50001ce9},
-	{0x0000a5e0, 0x900fff0b, 0x900fff0b, 0x54001ceb, 0x54001ceb},
-	{0x0000a5e4, 0x960fffcb, 0x960fffcb, 0x56001eec, 0x56001eec},
-	{0x0000a5e8, 0x9c1fff0b, 0x9c1fff0b, 0x56001eec, 0x56001eec},
-	{0x0000a5ec, 0x9c1fff0b, 0x9c1fff0b, 0x56001eec, 0x56001eec},
-	{0x0000a5f0, 0x9c1fff0b, 0x9c1fff0b, 0x56001eec, 0x56001eec},
-	{0x0000a5f4, 0x9c1fff0b, 0x9c1fff0b, 0x56001eec, 0x56001eec},
-	{0x0000a5f8, 0x9c1fff0b, 0x9c1fff0b, 0x56001eec, 0x56001eec},
-	{0x0000a5fc, 0x9c1fff0b, 0x9c1fff0b, 0x56001eec, 0x56001eec},
-	{0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a60c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a610, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a614, 0x01404000, 0x01404000, 0x01404000, 0x01404000},
-	{0x0000a618, 0x02008501, 0x02008501, 0x02008501, 0x02008501},
-	{0x0000a61c, 0x02008802, 0x02008802, 0x02008802, 0x02008802},
-	{0x0000a620, 0x0300c802, 0x0300c802, 0x0300c802, 0x0300c802},
-	{0x0000a624, 0x0300cc03, 0x0300cc03, 0x0300cc03, 0x0300cc03},
-	{0x0000a628, 0x04011004, 0x04011004, 0x04011004, 0x04011004},
-	{0x0000a62c, 0x04011004, 0x04011004, 0x04011004, 0x04011004},
-	{0x0000a630, 0x04011004, 0x04011004, 0x04011004, 0x04011004},
-	{0x0000a634, 0x04011004, 0x04011004, 0x04011004, 0x04011004},
-	{0x0000a638, 0x04011004, 0x04011004, 0x04011004, 0x04011004},
-	{0x0000a63c, 0x04011004, 0x04011004, 0x04011004, 0x04011004},
-};
+#define ar9331_1p2_baseband_core ar9331_1p1_baseband_core
 
-static const u32 ar9331_1p2_mac_postamble[][5] = {
-	/*  Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20  */
-	{0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160},
-	{0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c},
-	{0x000010b0, 0x00000e60, 0x00001cc0, 0x00007c70, 0x00003e38},
-	{0x00008014, 0x03e803e8, 0x07d007d0, 0x10801600, 0x08400b00},
-	{0x0000801c, 0x128d8027, 0x128d804f, 0x12e00057, 0x12e0002b},
-	{0x00008120, 0x08f04800, 0x08f04800, 0x08f04810, 0x08f04810},
-	{0x000081d0, 0x00003210, 0x00003210, 0x0000320a, 0x0000320a},
-	{0x00008318, 0x00003e80, 0x00007d00, 0x00006880, 0x00003440},
-};
+#define ar9331_1p2_soc_postamble ar9331_1p1_soc_postamble
 
-static const u32 ar9331_1p2_soc_preamble[][2] = {
-	/* Addr      allmodes  */
-	{0x00007020, 0x00000000},
-	{0x00007034, 0x00000002},
-	{0x00007038, 0x000002f8},
-};
+#define ar9331_1p2_mac_postamble ar9331_1p1_mac_postamble
 
-static const u32 ar9331_1p2_xtal_40M[][2] = {
-	/* Addr      allmodes  */
-	{0x00007038, 0x000004c2},
-	{0x00008244, 0x0010f400},
-	{0x0000824c, 0x0001e800},
-	{0x0001609c, 0x0b283f31},
-};
+#define ar9331_1p2_soc_preamble ar9331_1p1_soc_preamble
 
-static const u32 ar9331_1p2_mac_core[][2] = {
-	/* Addr      allmodes  */
-	{0x00000008, 0x00000000},
-	{0x00000030, 0x00020085},
-	{0x00000034, 0x00000005},
-	{0x00000040, 0x00000000},
-	{0x00000044, 0x00000000},
-	{0x00000048, 0x00000008},
-	{0x0000004c, 0x00000010},
-	{0x00000050, 0x00000000},
-	{0x00001040, 0x002ffc0f},
-	{0x00001044, 0x002ffc0f},
-	{0x00001048, 0x002ffc0f},
-	{0x0000104c, 0x002ffc0f},
-	{0x00001050, 0x002ffc0f},
-	{0x00001054, 0x002ffc0f},
-	{0x00001058, 0x002ffc0f},
-	{0x0000105c, 0x002ffc0f},
-	{0x00001060, 0x002ffc0f},
-	{0x00001064, 0x002ffc0f},
-	{0x000010f0, 0x00000100},
-	{0x00001270, 0x00000000},
-	{0x000012b0, 0x00000000},
-	{0x000012f0, 0x00000000},
-	{0x0000143c, 0x00000000},
-	{0x0000147c, 0x00000000},
-	{0x00008000, 0x00000000},
-	{0x00008004, 0x00000000},
-	{0x00008008, 0x00000000},
-	{0x0000800c, 0x00000000},
-	{0x00008018, 0x00000000},
-	{0x00008020, 0x00000000},
-	{0x00008038, 0x00000000},
-	{0x0000803c, 0x00000000},
-	{0x00008040, 0x00000000},
-	{0x00008044, 0x00000000},
-	{0x00008048, 0x00000000},
-	{0x0000804c, 0xffffffff},
-	{0x00008054, 0x00000000},
-	{0x00008058, 0x00000000},
-	{0x0000805c, 0x000fc78f},
-	{0x00008060, 0x0000000f},
-	{0x00008064, 0x00000000},
-	{0x00008070, 0x00000310},
-	{0x00008074, 0x00000020},
-	{0x00008078, 0x00000000},
-	{0x0000809c, 0x0000000f},
-	{0x000080a0, 0x00000000},
-	{0x000080a4, 0x02ff0000},
-	{0x000080a8, 0x0e070605},
-	{0x000080ac, 0x0000000d},
-	{0x000080b0, 0x00000000},
-	{0x000080b4, 0x00000000},
-	{0x000080b8, 0x00000000},
-	{0x000080bc, 0x00000000},
-	{0x000080c0, 0x2a800000},
-	{0x000080c4, 0x06900168},
-	{0x000080c8, 0x13881c20},
-	{0x000080cc, 0x01f40000},
-	{0x000080d0, 0x00252500},
-	{0x000080d4, 0x00a00000},
-	{0x000080d8, 0x00400000},
-	{0x000080dc, 0x00000000},
-	{0x000080e0, 0xffffffff},
-	{0x000080e4, 0x0000ffff},
-	{0x000080e8, 0x3f3f3f3f},
-	{0x000080ec, 0x00000000},
-	{0x000080f0, 0x00000000},
-	{0x000080f4, 0x00000000},
-	{0x000080fc, 0x00020000},
-	{0x00008100, 0x00000000},
-	{0x00008108, 0x00000052},
-	{0x0000810c, 0x00000000},
-	{0x00008110, 0x00000000},
-	{0x00008114, 0x000007ff},
-	{0x00008118, 0x000000aa},
-	{0x0000811c, 0x00003210},
-	{0x00008124, 0x00000000},
-	{0x00008128, 0x00000000},
-	{0x0000812c, 0x00000000},
-	{0x00008130, 0x00000000},
-	{0x00008134, 0x00000000},
-	{0x00008138, 0x00000000},
-	{0x0000813c, 0x0000ffff},
-	{0x00008144, 0xffffffff},
-	{0x00008168, 0x00000000},
-	{0x0000816c, 0x00000000},
-	{0x00008170, 0x18486200},
-	{0x00008174, 0x33332210},
-	{0x00008178, 0x00000000},
-	{0x0000817c, 0x00020000},
-	{0x000081c0, 0x00000000},
-	{0x000081c4, 0x33332210},
-	{0x000081c8, 0x00000000},
-	{0x000081cc, 0x00000000},
-	{0x000081d4, 0x00000000},
-	{0x000081ec, 0x00000000},
-	{0x000081f0, 0x00000000},
-	{0x000081f4, 0x00000000},
-	{0x000081f8, 0x00000000},
-	{0x000081fc, 0x00000000},
-	{0x00008240, 0x00100000},
-	{0x00008248, 0x00000800},
-	{0x00008250, 0x00000000},
-	{0x00008254, 0x00000000},
-	{0x00008258, 0x00000000},
-	{0x0000825c, 0x40000000},
-	{0x00008260, 0x00080922},
-	{0x00008264, 0x9d400010},
-	{0x00008268, 0xffffffff},
-	{0x0000826c, 0x0000ffff},
-	{0x00008270, 0x00000000},
-	{0x00008274, 0x40000000},
-	{0x00008278, 0x003e4180},
-	{0x0000827c, 0x00000004},
-	{0x00008284, 0x0000002c},
-	{0x00008288, 0x0000002c},
-	{0x0000828c, 0x000000ff},
-	{0x00008294, 0x00000000},
-	{0x00008298, 0x00000000},
-	{0x0000829c, 0x00000000},
-	{0x00008300, 0x00000140},
-	{0x00008314, 0x00000000},
-	{0x0000831c, 0x0000010d},
-	{0x00008328, 0x00000000},
-	{0x0000832c, 0x00000007},
-	{0x00008330, 0x00000302},
-	{0x00008334, 0x00000700},
-	{0x00008338, 0x00ff0000},
-	{0x0000833c, 0x02400000},
-	{0x00008340, 0x000107ff},
-	{0x00008344, 0xaa48105b},
-	{0x00008348, 0x008f0000},
-	{0x0000835c, 0x00000000},
-	{0x00008360, 0xffffffff},
-	{0x00008364, 0xffffffff},
-	{0x00008368, 0x00000000},
-	{0x00008370, 0x00000000},
-	{0x00008374, 0x000000ff},
-	{0x00008378, 0x00000000},
-	{0x0000837c, 0x00000000},
-	{0x00008380, 0xffffffff},
-	{0x00008384, 0xffffffff},
-	{0x00008390, 0xffffffff},
-	{0x00008394, 0xffffffff},
-	{0x00008398, 0x00000000},
-	{0x0000839c, 0x00000000},
-	{0x000083a0, 0x00000000},
-	{0x000083a4, 0x0000fa14},
-	{0x000083a8, 0x000f0c00},
-	{0x000083ac, 0x33332210},
-	{0x000083b0, 0x33332210},
-	{0x000083b4, 0x33332210},
-	{0x000083b8, 0x33332210},
-	{0x000083bc, 0x00000000},
-	{0x000083c0, 0x00000000},
-	{0x000083c4, 0x00000000},
-	{0x000083c8, 0x00000000},
-	{0x000083cc, 0x00000200},
-	{0x000083d0, 0x000301ff},
-};
+#define ar9331_1p2_mac_core ar9331_1p1_mac_core
 
-static const u32 ar9331_common_rx_gain_1p2[][2] = {
-	/* Addr      allmodes  */
-	{0x0000a000, 0x00010000},
-	{0x0000a004, 0x00030002},
-	{0x0000a008, 0x00050004},
-	{0x0000a00c, 0x00810080},
-	{0x0000a010, 0x01800082},
-	{0x0000a014, 0x01820181},
-	{0x0000a018, 0x01840183},
-	{0x0000a01c, 0x01880185},
-	{0x0000a020, 0x018a0189},
-	{0x0000a024, 0x02850284},
-	{0x0000a028, 0x02890288},
-	{0x0000a02c, 0x03850384},
-	{0x0000a030, 0x03890388},
-	{0x0000a034, 0x038b038a},
-	{0x0000a038, 0x038d038c},
-	{0x0000a03c, 0x03910390},
-	{0x0000a040, 0x03930392},
-	{0x0000a044, 0x03950394},
-	{0x0000a048, 0x00000396},
-	{0x0000a04c, 0x00000000},
-	{0x0000a050, 0x00000000},
-	{0x0000a054, 0x00000000},
-	{0x0000a058, 0x00000000},
-	{0x0000a05c, 0x00000000},
-	{0x0000a060, 0x00000000},
-	{0x0000a064, 0x00000000},
-	{0x0000a068, 0x00000000},
-	{0x0000a06c, 0x00000000},
-	{0x0000a070, 0x00000000},
-	{0x0000a074, 0x00000000},
-	{0x0000a078, 0x00000000},
-	{0x0000a07c, 0x00000000},
-	{0x0000a080, 0x28282828},
-	{0x0000a084, 0x28282828},
-	{0x0000a088, 0x28282828},
-	{0x0000a08c, 0x28282828},
-	{0x0000a090, 0x28282828},
-	{0x0000a094, 0x21212128},
-	{0x0000a098, 0x171c1c1c},
-	{0x0000a09c, 0x02020212},
-	{0x0000a0a0, 0x00000202},
-	{0x0000a0a4, 0x00000000},
-	{0x0000a0a8, 0x00000000},
-	{0x0000a0ac, 0x00000000},
-	{0x0000a0b0, 0x00000000},
-	{0x0000a0b4, 0x00000000},
-	{0x0000a0b8, 0x00000000},
-	{0x0000a0bc, 0x00000000},
-	{0x0000a0c0, 0x001f0000},
-	{0x0000a0c4, 0x111f1100},
-	{0x0000a0c8, 0x111d111e},
-	{0x0000a0cc, 0x111b111c},
-	{0x0000a0d0, 0x22032204},
-	{0x0000a0d4, 0x22012202},
-	{0x0000a0d8, 0x221f2200},
-	{0x0000a0dc, 0x221d221e},
-	{0x0000a0e0, 0x33013302},
-	{0x0000a0e4, 0x331f3300},
-	{0x0000a0e8, 0x4402331e},
-	{0x0000a0ec, 0x44004401},
-	{0x0000a0f0, 0x441e441f},
-	{0x0000a0f4, 0x55015502},
-	{0x0000a0f8, 0x551f5500},
-	{0x0000a0fc, 0x6602551e},
-	{0x0000a100, 0x66006601},
-	{0x0000a104, 0x661e661f},
-	{0x0000a108, 0x7703661d},
-	{0x0000a10c, 0x77017702},
-	{0x0000a110, 0x00007700},
-	{0x0000a114, 0x00000000},
-	{0x0000a118, 0x00000000},
-	{0x0000a11c, 0x00000000},
-	{0x0000a120, 0x00000000},
-	{0x0000a124, 0x00000000},
-	{0x0000a128, 0x00000000},
-	{0x0000a12c, 0x00000000},
-	{0x0000a130, 0x00000000},
-	{0x0000a134, 0x00000000},
-	{0x0000a138, 0x00000000},
-	{0x0000a13c, 0x00000000},
-	{0x0000a140, 0x001f0000},
-	{0x0000a144, 0x111f1100},
-	{0x0000a148, 0x111d111e},
-	{0x0000a14c, 0x111b111c},
-	{0x0000a150, 0x22032204},
-	{0x0000a154, 0x22012202},
-	{0x0000a158, 0x221f2200},
-	{0x0000a15c, 0x221d221e},
-	{0x0000a160, 0x33013302},
-	{0x0000a164, 0x331f3300},
-	{0x0000a168, 0x4402331e},
-	{0x0000a16c, 0x44004401},
-	{0x0000a170, 0x441e441f},
-	{0x0000a174, 0x55015502},
-	{0x0000a178, 0x551f5500},
-	{0x0000a17c, 0x6602551e},
-	{0x0000a180, 0x66006601},
-	{0x0000a184, 0x661e661f},
-	{0x0000a188, 0x7703661d},
-	{0x0000a18c, 0x77017702},
-	{0x0000a190, 0x00007700},
-	{0x0000a194, 0x00000000},
-	{0x0000a198, 0x00000000},
-	{0x0000a19c, 0x00000000},
-	{0x0000a1a0, 0x00000000},
-	{0x0000a1a4, 0x00000000},
-	{0x0000a1a8, 0x00000000},
-	{0x0000a1ac, 0x00000000},
-	{0x0000a1b0, 0x00000000},
-	{0x0000a1b4, 0x00000000},
-	{0x0000a1b8, 0x00000000},
-	{0x0000a1bc, 0x00000000},
-	{0x0000a1c0, 0x00000000},
-	{0x0000a1c4, 0x00000000},
-	{0x0000a1c8, 0x00000000},
-	{0x0000a1cc, 0x00000000},
-	{0x0000a1d0, 0x00000000},
-	{0x0000a1d4, 0x00000000},
-	{0x0000a1d8, 0x00000000},
-	{0x0000a1dc, 0x00000000},
-	{0x0000a1e0, 0x00000000},
-	{0x0000a1e4, 0x00000000},
-	{0x0000a1e8, 0x00000000},
-	{0x0000a1ec, 0x00000000},
-	{0x0000a1f0, 0x00000396},
-	{0x0000a1f4, 0x00000396},
-	{0x0000a1f8, 0x00000396},
-	{0x0000a1fc, 0x00000296},
-};
+#define ar9331_common_wo_xlna_rx_gain_1p2 ar9331_common_wo_xlna_rx_gain_1p1
+
+#define ar9331_common_rx_gain_1p2 ar9485_common_rx_gain_1_1
 
 #endif /* INITVALS_9330_1P2_H */
diff --git a/drivers/net/wireless/ath/ath9k/ar9340_initvals.h b/drivers/net/wireless/ath/ath9k/ar9340_initvals.h
index 210fd79..1d8235e 100644
--- a/drivers/net/wireless/ath/ath9k/ar9340_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9340_initvals.h
@@ -100,18 +100,7 @@ static const u32 ar9340Modes_lowest_ob_db_tx_gain_table_1p0[][5] = {
 	{0x00016448, 0x24925266, 0x24925266, 0x24925266, 0x24925266},
 };
 
-static const u32 ar9340Modes_fast_clock_1p0[][3] = {
-	/* Addr      5G_HT20     5G_HT40   */
-	{0x00001030, 0x00000268, 0x000004d0},
-	{0x00001070, 0x0000018c, 0x00000318},
-	{0x000010b0, 0x00000fd0, 0x00001fa0},
-	{0x00008014, 0x044c044c, 0x08980898},
-	{0x0000801c, 0x148ec02b, 0x148ec057},
-	{0x00008318, 0x000044c0, 0x00008980},
-	{0x00009e00, 0x0372131c, 0x0372131c},
-	{0x0000a230, 0x0000000b, 0x00000016},
-	{0x0000a254, 0x00000898, 0x00001130},
-};
+#define ar9340Modes_fast_clock_1p0 ar9300Modes_fast_clock_2p2
 
 static const u32 ar9340_1p0_radio_core[][2] = {
 	/* Addr      allmodes  */
@@ -224,22 +213,9 @@ static const u32 ar9340_1p0_radio_core_40M[][2] = {
 	{0x000160b0, 0x01885f5a},
 };
 
-static const u32 ar9340_1p0_mac_postamble[][5] = {
-	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
-	{0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160},
-	{0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c},
-	{0x000010b0, 0x00000e60, 0x00001cc0, 0x00007c70, 0x00003e38},
-	{0x00008014, 0x03e803e8, 0x07d007d0, 0x10801600, 0x08400b00},
-	{0x0000801c, 0x128d8027, 0x128d804f, 0x12e00057, 0x12e0002b},
-	{0x00008120, 0x08f04800, 0x08f04800, 0x08f04810, 0x08f04810},
-	{0x000081d0, 0x00003210, 0x00003210, 0x0000320a, 0x0000320a},
-	{0x00008318, 0x00003e80, 0x00007d00, 0x00006880, 0x00003440},
-};
+#define ar9340_1p0_mac_postamble ar9300_2p2_mac_postamble
 
-static const u32 ar9340_1p0_soc_postamble[][5] = {
-	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
-	{0x00007010, 0x00000023, 0x00000023, 0x00000023, 0x00000023},
-};
+#define ar9340_1p0_soc_postamble ar9300_2p2_soc_postamble
 
 static const u32 ar9340_1p0_baseband_postamble[][5] = {
 	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
@@ -1359,265 +1335,7 @@ static const u32 ar9340_1p0_mac_core[][2] = {
 	{0x000083d0, 0x000101ff},
 };
 
-static const u32 ar9340Common_wo_xlna_rx_gain_table_1p0[][2] = {
-	/* Addr      allmodes  */
-	{0x0000a000, 0x00010000},
-	{0x0000a004, 0x00030002},
-	{0x0000a008, 0x00050004},
-	{0x0000a00c, 0x00810080},
-	{0x0000a010, 0x00830082},
-	{0x0000a014, 0x01810180},
-	{0x0000a018, 0x01830182},
-	{0x0000a01c, 0x01850184},
-	{0x0000a020, 0x01890188},
-	{0x0000a024, 0x018b018a},
-	{0x0000a028, 0x018d018c},
-	{0x0000a02c, 0x03820190},
-	{0x0000a030, 0x03840383},
-	{0x0000a034, 0x03880385},
-	{0x0000a038, 0x038a0389},
-	{0x0000a03c, 0x038c038b},
-	{0x0000a040, 0x0390038d},
-	{0x0000a044, 0x03920391},
-	{0x0000a048, 0x03940393},
-	{0x0000a04c, 0x03960395},
-	{0x0000a050, 0x00000000},
-	{0x0000a054, 0x00000000},
-	{0x0000a058, 0x00000000},
-	{0x0000a05c, 0x00000000},
-	{0x0000a060, 0x00000000},
-	{0x0000a064, 0x00000000},
-	{0x0000a068, 0x00000000},
-	{0x0000a06c, 0x00000000},
-	{0x0000a070, 0x00000000},
-	{0x0000a074, 0x00000000},
-	{0x0000a078, 0x00000000},
-	{0x0000a07c, 0x00000000},
-	{0x0000a080, 0x29292929},
-	{0x0000a084, 0x29292929},
-	{0x0000a088, 0x29292929},
-	{0x0000a08c, 0x29292929},
-	{0x0000a090, 0x22292929},
-	{0x0000a094, 0x1d1d2222},
-	{0x0000a098, 0x0c111117},
-	{0x0000a09c, 0x00030303},
-	{0x0000a0a0, 0x00000000},
-	{0x0000a0a4, 0x00000000},
-	{0x0000a0a8, 0x00000000},
-	{0x0000a0ac, 0x00000000},
-	{0x0000a0b0, 0x00000000},
-	{0x0000a0b4, 0x00000000},
-	{0x0000a0b8, 0x00000000},
-	{0x0000a0bc, 0x00000000},
-	{0x0000a0c0, 0x001f0000},
-	{0x0000a0c4, 0x01000101},
-	{0x0000a0c8, 0x011e011f},
-	{0x0000a0cc, 0x011c011d},
-	{0x0000a0d0, 0x02030204},
-	{0x0000a0d4, 0x02010202},
-	{0x0000a0d8, 0x021f0200},
-	{0x0000a0dc, 0x0302021e},
-	{0x0000a0e0, 0x03000301},
-	{0x0000a0e4, 0x031e031f},
-	{0x0000a0e8, 0x0402031d},
-	{0x0000a0ec, 0x04000401},
-	{0x0000a0f0, 0x041e041f},
-	{0x0000a0f4, 0x0502041d},
-	{0x0000a0f8, 0x05000501},
-	{0x0000a0fc, 0x051e051f},
-	{0x0000a100, 0x06010602},
-	{0x0000a104, 0x061f0600},
-	{0x0000a108, 0x061d061e},
-	{0x0000a10c, 0x07020703},
-	{0x0000a110, 0x07000701},
-	{0x0000a114, 0x00000000},
-	{0x0000a118, 0x00000000},
-	{0x0000a11c, 0x00000000},
-	{0x0000a120, 0x00000000},
-	{0x0000a124, 0x00000000},
-	{0x0000a128, 0x00000000},
-	{0x0000a12c, 0x00000000},
-	{0x0000a130, 0x00000000},
-	{0x0000a134, 0x00000000},
-	{0x0000a138, 0x00000000},
-	{0x0000a13c, 0x00000000},
-	{0x0000a140, 0x001f0000},
-	{0x0000a144, 0x01000101},
-	{0x0000a148, 0x011e011f},
-	{0x0000a14c, 0x011c011d},
-	{0x0000a150, 0x02030204},
-	{0x0000a154, 0x02010202},
-	{0x0000a158, 0x021f0200},
-	{0x0000a15c, 0x0302021e},
-	{0x0000a160, 0x03000301},
-	{0x0000a164, 0x031e031f},
-	{0x0000a168, 0x0402031d},
-	{0x0000a16c, 0x04000401},
-	{0x0000a170, 0x041e041f},
-	{0x0000a174, 0x0502041d},
-	{0x0000a178, 0x05000501},
-	{0x0000a17c, 0x051e051f},
-	{0x0000a180, 0x06010602},
-	{0x0000a184, 0x061f0600},
-	{0x0000a188, 0x061d061e},
-	{0x0000a18c, 0x07020703},
-	{0x0000a190, 0x07000701},
-	{0x0000a194, 0x00000000},
-	{0x0000a198, 0x00000000},
-	{0x0000a19c, 0x00000000},
-	{0x0000a1a0, 0x00000000},
-	{0x0000a1a4, 0x00000000},
-	{0x0000a1a8, 0x00000000},
-	{0x0000a1ac, 0x00000000},
-	{0x0000a1b0, 0x00000000},
-	{0x0000a1b4, 0x00000000},
-	{0x0000a1b8, 0x00000000},
-	{0x0000a1bc, 0x00000000},
-	{0x0000a1c0, 0x00000000},
-	{0x0000a1c4, 0x00000000},
-	{0x0000a1c8, 0x00000000},
-	{0x0000a1cc, 0x00000000},
-	{0x0000a1d0, 0x00000000},
-	{0x0000a1d4, 0x00000000},
-	{0x0000a1d8, 0x00000000},
-	{0x0000a1dc, 0x00000000},
-	{0x0000a1e0, 0x00000000},
-	{0x0000a1e4, 0x00000000},
-	{0x0000a1e8, 0x00000000},
-	{0x0000a1ec, 0x00000000},
-	{0x0000a1f0, 0x00000396},
-	{0x0000a1f4, 0x00000396},
-	{0x0000a1f8, 0x00000396},
-	{0x0000a1fc, 0x00000196},
-	{0x0000b000, 0x00010000},
-	{0x0000b004, 0x00030002},
-	{0x0000b008, 0x00050004},
-	{0x0000b00c, 0x00810080},
-	{0x0000b010, 0x00830082},
-	{0x0000b014, 0x01810180},
-	{0x0000b018, 0x01830182},
-	{0x0000b01c, 0x01850184},
-	{0x0000b020, 0x02810280},
-	{0x0000b024, 0x02830282},
-	{0x0000b028, 0x02850284},
-	{0x0000b02c, 0x02890288},
-	{0x0000b030, 0x028b028a},
-	{0x0000b034, 0x0388028c},
-	{0x0000b038, 0x038a0389},
-	{0x0000b03c, 0x038c038b},
-	{0x0000b040, 0x0390038d},
-	{0x0000b044, 0x03920391},
-	{0x0000b048, 0x03940393},
-	{0x0000b04c, 0x03960395},
-	{0x0000b050, 0x00000000},
-	{0x0000b054, 0x00000000},
-	{0x0000b058, 0x00000000},
-	{0x0000b05c, 0x00000000},
-	{0x0000b060, 0x00000000},
-	{0x0000b064, 0x00000000},
-	{0x0000b068, 0x00000000},
-	{0x0000b06c, 0x00000000},
-	{0x0000b070, 0x00000000},
-	{0x0000b074, 0x00000000},
-	{0x0000b078, 0x00000000},
-	{0x0000b07c, 0x00000000},
-	{0x0000b080, 0x32323232},
-	{0x0000b084, 0x2f2f3232},
-	{0x0000b088, 0x23282a2d},
-	{0x0000b08c, 0x1c1e2123},
-	{0x0000b090, 0x14171919},
-	{0x0000b094, 0x0e0e1214},
-	{0x0000b098, 0x03050707},
-	{0x0000b09c, 0x00030303},
-	{0x0000b0a0, 0x00000000},
-	{0x0000b0a4, 0x00000000},
-	{0x0000b0a8, 0x00000000},
-	{0x0000b0ac, 0x00000000},
-	{0x0000b0b0, 0x00000000},
-	{0x0000b0b4, 0x00000000},
-	{0x0000b0b8, 0x00000000},
-	{0x0000b0bc, 0x00000000},
-	{0x0000b0c0, 0x003f0020},
-	{0x0000b0c4, 0x00400041},
-	{0x0000b0c8, 0x0140005f},
-	{0x0000b0cc, 0x0160015f},
-	{0x0000b0d0, 0x017e017f},
-	{0x0000b0d4, 0x02410242},
-	{0x0000b0d8, 0x025f0240},
-	{0x0000b0dc, 0x027f0260},
-	{0x0000b0e0, 0x0341027e},
-	{0x0000b0e4, 0x035f0340},
-	{0x0000b0e8, 0x037f0360},
-	{0x0000b0ec, 0x04400441},
-	{0x0000b0f0, 0x0460045f},
-	{0x0000b0f4, 0x0541047f},
-	{0x0000b0f8, 0x055f0540},
-	{0x0000b0fc, 0x057f0560},
-	{0x0000b100, 0x06400641},
-	{0x0000b104, 0x0660065f},
-	{0x0000b108, 0x067e067f},
-	{0x0000b10c, 0x07410742},
-	{0x0000b110, 0x075f0740},
-	{0x0000b114, 0x077f0760},
-	{0x0000b118, 0x07800781},
-	{0x0000b11c, 0x07a0079f},
-	{0x0000b120, 0x07c107bf},
-	{0x0000b124, 0x000007c0},
-	{0x0000b128, 0x00000000},
-	{0x0000b12c, 0x00000000},
-	{0x0000b130, 0x00000000},
-	{0x0000b134, 0x00000000},
-	{0x0000b138, 0x00000000},
-	{0x0000b13c, 0x00000000},
-	{0x0000b140, 0x003f0020},
-	{0x0000b144, 0x00400041},
-	{0x0000b148, 0x0140005f},
-	{0x0000b14c, 0x0160015f},
-	{0x0000b150, 0x017e017f},
-	{0x0000b154, 0x02410242},
-	{0x0000b158, 0x025f0240},
-	{0x0000b15c, 0x027f0260},
-	{0x0000b160, 0x0341027e},
-	{0x0000b164, 0x035f0340},
-	{0x0000b168, 0x037f0360},
-	{0x0000b16c, 0x04400441},
-	{0x0000b170, 0x0460045f},
-	{0x0000b174, 0x0541047f},
-	{0x0000b178, 0x055f0540},
-	{0x0000b17c, 0x057f0560},
-	{0x0000b180, 0x06400641},
-	{0x0000b184, 0x0660065f},
-	{0x0000b188, 0x067e067f},
-	{0x0000b18c, 0x07410742},
-	{0x0000b190, 0x075f0740},
-	{0x0000b194, 0x077f0760},
-	{0x0000b198, 0x07800781},
-	{0x0000b19c, 0x07a0079f},
-	{0x0000b1a0, 0x07c107bf},
-	{0x0000b1a4, 0x000007c0},
-	{0x0000b1a8, 0x00000000},
-	{0x0000b1ac, 0x00000000},
-	{0x0000b1b0, 0x00000000},
-	{0x0000b1b4, 0x00000000},
-	{0x0000b1b8, 0x00000000},
-	{0x0000b1bc, 0x00000000},
-	{0x0000b1c0, 0x00000000},
-	{0x0000b1c4, 0x00000000},
-	{0x0000b1c8, 0x00000000},
-	{0x0000b1cc, 0x00000000},
-	{0x0000b1d0, 0x00000000},
-	{0x0000b1d4, 0x00000000},
-	{0x0000b1d8, 0x00000000},
-	{0x0000b1dc, 0x00000000},
-	{0x0000b1e0, 0x00000000},
-	{0x0000b1e4, 0x00000000},
-	{0x0000b1e8, 0x00000000},
-	{0x0000b1ec, 0x00000000},
-	{0x0000b1f0, 0x00000396},
-	{0x0000b1f4, 0x00000396},
-	{0x0000b1f8, 0x00000396},
-	{0x0000b1fc, 0x00000196},
-};
+#define ar9340Common_wo_xlna_rx_gain_table_1p0 ar9300Common_wo_xlna_rx_gain_table_2p2
 
 static const u32 ar9340_1p0_soc_preamble[][2] = {
 	/* Addr      allmodes  */
diff --git a/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h b/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h
index bbf48918a..4ef7dcc 100644
--- a/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h
@@ -1,5 +1,6 @@
 /*
- * Copyright (c) 2010 Atheros Communications Inc.
+ * Copyright (c) 2010-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2012 Qualcomm Atheros Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -1007,7 +1008,7 @@ static const u32 ar9462_2p0_radio_core[][2] = {
 
 static const u32 ar9462_2p0_soc_preamble[][2] = {
 	/* Addr      allmodes  */
-	{0x000040a4 ,0x00a0c1c9},
+	{0x000040a4, 0x00a0c1c9},
 	{0x00007020, 0x00000000},
 	{0x00007034, 0x00000002},
 	{0x00007038, 0x000004c2},
diff --git a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h
index d16d029..fb4497f 100644
--- a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2010-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2012 Qualcomm Atheros Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -17,599 +18,151 @@
 #ifndef INITVALS_9485_H
 #define INITVALS_9485_H
 
-static const u32 ar9485_1_1_mac_core[][2] = {
-	/*  Addr       allmodes */
-	{0x00000008, 0x00000000},
-	{0x00000030, 0x00020085},
-	{0x00000034, 0x00000005},
-	{0x00000040, 0x00000000},
-	{0x00000044, 0x00000000},
-	{0x00000048, 0x00000008},
-	{0x0000004c, 0x00000010},
-	{0x00000050, 0x00000000},
-	{0x00001040, 0x002ffc0f},
-	{0x00001044, 0x002ffc0f},
-	{0x00001048, 0x002ffc0f},
-	{0x0000104c, 0x002ffc0f},
-	{0x00001050, 0x002ffc0f},
-	{0x00001054, 0x002ffc0f},
-	{0x00001058, 0x002ffc0f},
-	{0x0000105c, 0x002ffc0f},
-	{0x00001060, 0x002ffc0f},
-	{0x00001064, 0x002ffc0f},
-	{0x000010f0, 0x00000100},
-	{0x00001270, 0x00000000},
-	{0x000012b0, 0x00000000},
-	{0x000012f0, 0x00000000},
-	{0x0000143c, 0x00000000},
-	{0x0000147c, 0x00000000},
-	{0x00008000, 0x00000000},
-	{0x00008004, 0x00000000},
-	{0x00008008, 0x00000000},
-	{0x0000800c, 0x00000000},
-	{0x00008018, 0x00000000},
-	{0x00008020, 0x00000000},
-	{0x00008038, 0x00000000},
-	{0x0000803c, 0x00000000},
-	{0x00008040, 0x00000000},
-	{0x00008044, 0x00000000},
-	{0x00008048, 0x00000000},
-	{0x0000804c, 0xffffffff},
-	{0x00008054, 0x00000000},
-	{0x00008058, 0x00000000},
-	{0x0000805c, 0x000fc78f},
-	{0x00008060, 0x0000000f},
-	{0x00008064, 0x00000000},
-	{0x00008070, 0x00000310},
-	{0x00008074, 0x00000020},
-	{0x00008078, 0x00000000},
-	{0x0000809c, 0x0000000f},
-	{0x000080a0, 0x00000000},
-	{0x000080a4, 0x02ff0000},
-	{0x000080a8, 0x0e070605},
-	{0x000080ac, 0x0000000d},
-	{0x000080b0, 0x00000000},
-	{0x000080b4, 0x00000000},
-	{0x000080b8, 0x00000000},
-	{0x000080bc, 0x00000000},
-	{0x000080c0, 0x2a800000},
-	{0x000080c4, 0x06900168},
-	{0x000080c8, 0x13881c22},
-	{0x000080cc, 0x01f40000},
-	{0x000080d0, 0x00252500},
-	{0x000080d4, 0x00a00000},
-	{0x000080d8, 0x00400000},
-	{0x000080dc, 0x00000000},
-	{0x000080e0, 0xffffffff},
-	{0x000080e4, 0x0000ffff},
-	{0x000080e8, 0x3f3f3f3f},
-	{0x000080ec, 0x00000000},
-	{0x000080f0, 0x00000000},
-	{0x000080f4, 0x00000000},
-	{0x000080fc, 0x00020000},
-	{0x00008100, 0x00000000},
-	{0x00008108, 0x00000052},
-	{0x0000810c, 0x00000000},
-	{0x00008110, 0x00000000},
-	{0x00008114, 0x000007ff},
-	{0x00008118, 0x000000aa},
-	{0x0000811c, 0x00003210},
-	{0x00008124, 0x00000000},
-	{0x00008128, 0x00000000},
-	{0x0000812c, 0x00000000},
-	{0x00008130, 0x00000000},
-	{0x00008134, 0x00000000},
-	{0x00008138, 0x00000000},
-	{0x0000813c, 0x0000ffff},
-	{0x00008144, 0xffffffff},
-	{0x00008168, 0x00000000},
-	{0x0000816c, 0x00000000},
-	{0x00008170, 0x18486200},
-	{0x00008174, 0x33332210},
-	{0x00008178, 0x00000000},
-	{0x0000817c, 0x00020000},
-	{0x000081c0, 0x00000000},
-	{0x000081c4, 0x33332210},
-	{0x000081d4, 0x00000000},
-	{0x000081ec, 0x00000000},
-	{0x000081f0, 0x00000000},
-	{0x000081f4, 0x00000000},
-	{0x000081f8, 0x00000000},
-	{0x000081fc, 0x00000000},
-	{0x00008240, 0x00100000},
-	{0x00008244, 0x0010f400},
-	{0x00008248, 0x00000800},
-	{0x0000824c, 0x0001e800},
-	{0x00008250, 0x00000000},
-	{0x00008254, 0x00000000},
-	{0x00008258, 0x00000000},
-	{0x0000825c, 0x40000000},
-	{0x00008260, 0x00080922},
-	{0x00008264, 0x9ca00010},
-	{0x00008268, 0xffffffff},
-	{0x0000826c, 0x0000ffff},
-	{0x00008270, 0x00000000},
-	{0x00008274, 0x40000000},
-	{0x00008278, 0x003e4180},
-	{0x0000827c, 0x00000004},
-	{0x00008284, 0x0000002c},
-	{0x00008288, 0x0000002c},
-	{0x0000828c, 0x000000ff},
-	{0x00008294, 0x00000000},
-	{0x00008298, 0x00000000},
-	{0x0000829c, 0x00000000},
-	{0x00008300, 0x00000140},
-	{0x00008314, 0x00000000},
-	{0x0000831c, 0x0000010d},
-	{0x00008328, 0x00000000},
-	{0x0000832c, 0x00000007},
-	{0x00008330, 0x00000302},
-	{0x00008334, 0x00000700},
-	{0x00008338, 0x00ff0000},
-	{0x0000833c, 0x02400000},
-	{0x00008340, 0x000107ff},
-	{0x00008344, 0xa248105b},
-	{0x00008348, 0x008f0000},
-	{0x0000835c, 0x00000000},
-	{0x00008360, 0xffffffff},
-	{0x00008364, 0xffffffff},
-	{0x00008368, 0x00000000},
-	{0x00008370, 0x00000000},
-	{0x00008374, 0x000000ff},
-	{0x00008378, 0x00000000},
-	{0x0000837c, 0x00000000},
-	{0x00008380, 0xffffffff},
-	{0x00008384, 0xffffffff},
-	{0x00008390, 0xffffffff},
-	{0x00008394, 0xffffffff},
-	{0x00008398, 0x00000000},
-	{0x0000839c, 0x00000000},
-	{0x000083a0, 0x00000000},
-	{0x000083a4, 0x0000fa14},
-	{0x000083a8, 0x000f0c00},
-	{0x000083ac, 0x33332210},
-	{0x000083b0, 0x33332210},
-	{0x000083b4, 0x33332210},
-	{0x000083b8, 0x33332210},
-	{0x000083bc, 0x00000000},
-	{0x000083c0, 0x00000000},
-	{0x000083c4, 0x00000000},
-	{0x000083c8, 0x00000000},
-	{0x000083cc, 0x00000200},
-	{0x000083d0, 0x000301ff},
-};
-
-static const u32 ar9485_1_1_baseband_core[][2] = {
-	/* Addr       allmodes */
-	{0x00009800, 0xafe68e30},
-	{0x00009804, 0xfd14e000},
-	{0x00009808, 0x9c0a8f6b},
-	{0x0000980c, 0x04800000},
-	{0x00009814, 0x9280c00a},
-	{0x00009818, 0x00000000},
-	{0x0000981c, 0x00020028},
-	{0x00009834, 0x5f3ca3de},
-	{0x00009838, 0x0108ecff},
-	{0x0000983c, 0x14750600},
-	{0x00009880, 0x201fff00},
-	{0x00009884, 0x00001042},
-	{0x000098a4, 0x00200400},
-	{0x000098b0, 0x52440bbe},
-	{0x000098d0, 0x004b6a8e},
-	{0x000098d4, 0x00000820},
-	{0x000098dc, 0x00000000},
-	{0x000098f0, 0x00000000},
-	{0x000098f4, 0x00000000},
-	{0x00009c04, 0x00000000},
-	{0x00009c08, 0x03200000},
-	{0x00009c0c, 0x00000000},
-	{0x00009c10, 0x00000000},
-	{0x00009c14, 0x00046384},
-	{0x00009c18, 0x05b6b440},
-	{0x00009c1c, 0x00b6b440},
-	{0x00009d00, 0xc080a333},
-	{0x00009d04, 0x40206c10},
-	{0x00009d08, 0x009c4060},
-	{0x00009d0c, 0x1883800a},
-	{0x00009d10, 0x01834061},
-	{0x00009d14, 0x00c00400},
-	{0x00009d18, 0x00000000},
-	{0x00009d1c, 0x00000000},
-	{0x00009e08, 0x0038233c},
-	{0x00009e24, 0x9927b515},
-	{0x00009e28, 0x12ef0200},
-	{0x00009e30, 0x06336f77},
-	{0x00009e34, 0x6af6532f},
-	{0x00009e38, 0x0cc80c00},
-	{0x00009e40, 0x0d261820},
-	{0x00009e4c, 0x00001004},
-	{0x00009e50, 0x00ff03f1},
-	{0x00009fc0, 0x80be4788},
-	{0x00009fc4, 0x0001efb5},
-	{0x00009fcc, 0x40000014},
-	{0x0000a20c, 0x00000000},
-	{0x0000a210, 0x00000000},
-	{0x0000a220, 0x00000000},
-	{0x0000a224, 0x00000000},
-	{0x0000a228, 0x10002310},
-	{0x0000a23c, 0x00000000},
-	{0x0000a244, 0x0c000000},
-	{0x0000a2a0, 0x00000001},
-	{0x0000a2c0, 0x00000001},
-	{0x0000a2c8, 0x00000000},
-	{0x0000a2cc, 0x18c43433},
-	{0x0000a2d4, 0x00000000},
-	{0x0000a2dc, 0x00000000},
-	{0x0000a2e0, 0x00000000},
-	{0x0000a2e4, 0x00000000},
-	{0x0000a2e8, 0x00000000},
-	{0x0000a2ec, 0x00000000},
-	{0x0000a2f0, 0x00000000},
-	{0x0000a2f4, 0x00000000},
-	{0x0000a2f8, 0x00000000},
-	{0x0000a344, 0x00000000},
-	{0x0000a34c, 0x00000000},
-	{0x0000a350, 0x0000a000},
-	{0x0000a364, 0x00000000},
-	{0x0000a370, 0x00000000},
-	{0x0000a390, 0x00000001},
-	{0x0000a394, 0x00000444},
-	{0x0000a398, 0x001f0e0f},
-	{0x0000a39c, 0x0075393f},
-	{0x0000a3a0, 0xb79f6427},
-	{0x0000a3a4, 0x000000ff},
-	{0x0000a3a8, 0x3b3b3b3b},
-	{0x0000a3ac, 0x2f2f2f2f},
-	{0x0000a3c0, 0x20202020},
-	{0x0000a3c4, 0x22222220},
-	{0x0000a3c8, 0x20200020},
-	{0x0000a3cc, 0x20202020},
-	{0x0000a3d0, 0x20202020},
-	{0x0000a3d4, 0x20202020},
-	{0x0000a3d8, 0x20202020},
-	{0x0000a3dc, 0x20202020},
-	{0x0000a3e0, 0x20202020},
-	{0x0000a3e4, 0x20202020},
-	{0x0000a3e8, 0x20202020},
-	{0x0000a3ec, 0x20202020},
-	{0x0000a3f0, 0x00000000},
-	{0x0000a3f4, 0x00000006},
-	{0x0000a3f8, 0x0cdbd380},
-	{0x0000a3fc, 0x000f0f01},
-	{0x0000a400, 0x8fa91f01},
-	{0x0000a404, 0x00000000},
-	{0x0000a408, 0x0e79e5c6},
-	{0x0000a40c, 0x00820820},
-	{0x0000a414, 0x1ce739cf},
-	{0x0000a418, 0x2d0019ce},
-	{0x0000a41c, 0x1ce739ce},
-	{0x0000a420, 0x000001ce},
-	{0x0000a424, 0x1ce739ce},
-	{0x0000a428, 0x000001ce},
-	{0x0000a42c, 0x1ce739ce},
-	{0x0000a430, 0x1ce739ce},
-	{0x0000a434, 0x00000000},
-	{0x0000a438, 0x00001801},
-	{0x0000a43c, 0x00000000},
-	{0x0000a440, 0x00000000},
-	{0x0000a444, 0x00000000},
-	{0x0000a448, 0x04000000},
-	{0x0000a44c, 0x00000001},
-	{0x0000a450, 0x00010000},
-	{0x0000a5c4, 0xbfad9d74},
-	{0x0000a5c8, 0x0048060a},
-	{0x0000a5cc, 0x00000637},
-	{0x0000a760, 0x03020100},
-	{0x0000a764, 0x09080504},
-	{0x0000a768, 0x0d0c0b0a},
-	{0x0000a76c, 0x13121110},
-	{0x0000a770, 0x31301514},
-	{0x0000a774, 0x35343332},
-	{0x0000a778, 0x00000036},
-	{0x0000a780, 0x00000838},
-	{0x0000a7c0, 0x00000000},
-	{0x0000a7c4, 0xfffffffc},
-	{0x0000a7c8, 0x00000000},
-	{0x0000a7cc, 0x00000000},
-	{0x0000a7d0, 0x00000000},
-	{0x0000a7d4, 0x00000004},
-	{0x0000a7dc, 0x00000000},
-};
-
-static const u32 ar9485Common_1_1[][2] = {
-	/*  Addr      allmodes */
-	{0x00007010, 0x00000022},
-	{0x00007020, 0x00000000},
-	{0x00007034, 0x00000002},
-	{0x00007038, 0x000004c2},
-};
-
-static const u32 ar9485_1_1_baseband_postamble[][5] = {
-	/* Addr       5G_HT20        5G_HT40       2G_HT40       2G_HT20 */
-	{0x00009810, 0xd00a8005, 0xd00a8005, 0xd00a8005, 0xd00a8005},
-	{0x00009820, 0x206a002e, 0x206a002e, 0x206a002e, 0x206a002e},
-	{0x00009824, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0},
-	{0x00009828, 0x06903081, 0x06903081, 0x06903881, 0x06903881},
-	{0x0000982c, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4},
-	{0x00009830, 0x0000059c, 0x0000059c, 0x0000059c, 0x0000059c},
-	{0x00009c00, 0x00000044, 0x00000044, 0x00000044, 0x00000044},
-	{0x00009e00, 0x0372161e, 0x0372161e, 0x037216a0, 0x037216a0},
-	{0x00009e04, 0x00182020, 0x00182020, 0x00182020, 0x00182020},
-	{0x00009e0c, 0x6c4000e2, 0x6d4000e2, 0x6d4000e2, 0x6c4000e2},
-	{0x00009e10, 0x7ec88d2e, 0x7ec88d2e, 0x7ec80d2e, 0x7ec80d2e},
-	{0x00009e14, 0x31395d5e, 0x3139605e, 0x3139605e, 0x31395d5e},
-	{0x00009e18, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c},
-	{0x00009e20, 0x000003b5, 0x000003b5, 0x000003ce, 0x000003ce},
-	{0x00009e2c, 0x0000001c, 0x0000001c, 0x00000021, 0x00000021},
-	{0x00009e3c, 0xcf946220, 0xcf946220, 0xcf946222, 0xcf946222},
-	{0x00009e44, 0x02321e27, 0x02321e27, 0x02282324, 0x02282324},
-	{0x00009e48, 0x5030201a, 0x5030201a, 0x50302010, 0x50302010},
-	{0x00009fc8, 0x0003f000, 0x0003f000, 0x0001a000, 0x0001a000},
-	{0x0000a204, 0x01303fc0, 0x01303fc4, 0x01303fc4, 0x01303fc0},
-	{0x0000a208, 0x00000104, 0x00000104, 0x00000004, 0x00000004},
-	{0x0000a230, 0x0000400a, 0x00004014, 0x00004016, 0x0000400b},
-	{0x0000a234, 0x10000fff, 0x10000fff, 0x10000fff, 0x10000fff},
-	{0x0000a238, 0xffb81018, 0xffb81018, 0xffb81018, 0xffb81018},
-	{0x0000a250, 0x00000000, 0x00000000, 0x00000210, 0x00000108},
-	{0x0000a254, 0x000007d0, 0x00000fa0, 0x00001130, 0x00000898},
-	{0x0000a258, 0x02020002, 0x02020002, 0x02020002, 0x02020002},
-	{0x0000a25c, 0x01000e0e, 0x01000e0e, 0x01000e0e, 0x01000e0e},
-	{0x0000a260, 0x3a021501, 0x3a021501, 0x3a021501, 0x3a021501},
-	{0x0000a264, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e},
-	{0x0000a280, 0x00000007, 0x00000007, 0x0000000b, 0x0000000b},
-	{0x0000a284, 0x00000000, 0x00000000, 0x000002a0, 0x000002a0},
-	{0x0000a288, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a28c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a2c4, 0x00158d18, 0x00158d18, 0x00158d18, 0x00158d18},
-	{0x0000a2d0, 0x00071981, 0x00071981, 0x00071982, 0x00071982},
-	{0x0000a2d8, 0xf999a83a, 0xf999a83a, 0xf999a83a, 0xf999a83a},
-	{0x0000a358, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000be04, 0x00802020, 0x00802020, 0x00802020, 0x00802020},
-	{0x0000be18, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-};
-
-static const u32 ar9485Modes_high_ob_db_tx_gain_1_1[][5] = {
-	/* Addr        5G_HT20       5G_HT40       2G_HT40       2G_HT20 */
-	{0x000098bc, 0x00000002, 0x00000002, 0x00000002, 0x00000002},
-	{0x0000a410, 0x000050d9, 0x000050d9, 0x000050d8, 0x000050d8},
-	{0x0000a458, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a500, 0x00022200, 0x00022200, 0x00000000, 0x00000000},
-	{0x0000a504, 0x05062002, 0x05062002, 0x04000002, 0x04000002},
-	{0x0000a508, 0x0c002e00, 0x0c002e00, 0x08000004, 0x08000004},
-	{0x0000a50c, 0x11062202, 0x11062202, 0x0d000200, 0x0d000200},
-	{0x0000a510, 0x17022e00, 0x17022e00, 0x11000202, 0x11000202},
-	{0x0000a514, 0x1d000ec2, 0x1d000ec2, 0x15000400, 0x15000400},
-	{0x0000a518, 0x25020ec0, 0x25020ec0, 0x19000402, 0x19000402},
-	{0x0000a51c, 0x2b020ec3, 0x2b020ec3, 0x1d000404, 0x1d000404},
-	{0x0000a520, 0x2f001f04, 0x2f001f04, 0x21000603, 0x21000603},
-	{0x0000a524, 0x35001fc4, 0x35001fc4, 0x25000605, 0x25000605},
-	{0x0000a528, 0x3c022f04, 0x3c022f04, 0x2a000a03, 0x2a000a03},
-	{0x0000a52c, 0x41023e85, 0x41023e85, 0x2c000a04, 0x2c000a04},
-	{0x0000a530, 0x48023ec6, 0x48023ec6, 0x34000e20, 0x34000e20},
-	{0x0000a534, 0x4d023f01, 0x4d023f01, 0x35000e21, 0x35000e21},
-	{0x0000a538, 0x53023f4b, 0x53023f4b, 0x43000e62, 0x43000e62},
-	{0x0000a53c, 0x5a027f09, 0x5a027f09, 0x45000e63, 0x45000e63},
-	{0x0000a540, 0x5f027fc9, 0x5f027fc9, 0x49000e65, 0x49000e65},
-	{0x0000a544, 0x6502feca, 0x6502feca, 0x4b000e66, 0x4b000e66},
-	{0x0000a548, 0x6b02ff4a, 0x6b02ff4a, 0x4d001645, 0x4d001645},
-	{0x0000a54c, 0x7203feca, 0x7203feca, 0x51001865, 0x51001865},
-	{0x0000a550, 0x7703ff0b, 0x7703ff0b, 0x55001a86, 0x55001a86},
-	{0x0000a554, 0x7d06ffcb, 0x7d06ffcb, 0x57001ce9, 0x57001ce9},
-	{0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x5a001ceb, 0x5a001ceb},
-	{0x0000a55c, 0x8907ffcb, 0x8907ffcb, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a560, 0x900fff0b, 0x900fff0b, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a564, 0x960fffcb, 0x960fffcb, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a568, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a56c, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a570, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a574, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a578, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a57c, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb},
-	{0x0000b500, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b504, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b508, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b50c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b510, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b514, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b518, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b51c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b520, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b524, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b528, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b52c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b530, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b534, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b538, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b53c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b540, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b544, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b548, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b54c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b550, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b554, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b558, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b55c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b560, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b564, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b568, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b56c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b570, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b574, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b578, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b57c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x00016044, 0x05d6b2db, 0x05d6b2db, 0x05d6b2db, 0x05d6b2db},
-	{0x00016048, 0x6c924260, 0x6c924260, 0x6c924260, 0x6c924260},
-};
-
-static const u32 ar9485_modes_lowest_ob_db_tx_gain_1_1[][5] = {
-	/* Addr        5G_HT20       5G_HT40       2G_HT40       2G_HT20  */
-	{0x000098bc, 0x00000002, 0x00000002, 0x00000002, 0x00000002},
-	{0x0000a410, 0x000050d9, 0x000050d9, 0x000050d8, 0x000050d8},
-	{0x0000a458, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a500, 0x00022200, 0x00022200, 0x00000000, 0x00000000},
-	{0x0000a504, 0x05062002, 0x05062002, 0x04000002, 0x04000002},
-	{0x0000a508, 0x0c002e00, 0x0c002e00, 0x08000004, 0x08000004},
-	{0x0000a50c, 0x11062202, 0x11062202, 0x0d000200, 0x0d000200},
-	{0x0000a510, 0x17022e00, 0x17022e00, 0x11000202, 0x11000202},
-	{0x0000a514, 0x1d000ec2, 0x1d000ec2, 0x15000400, 0x15000400},
-	{0x0000a518, 0x25020ec0, 0x25020ec0, 0x19000402, 0x19000402},
-	{0x0000a51c, 0x2b020ec3, 0x2b020ec3, 0x1d000404, 0x1d000404},
-	{0x0000a520, 0x2f001f04, 0x2f001f04, 0x21000603, 0x21000603},
-	{0x0000a524, 0x35001fc4, 0x35001fc4, 0x25000605, 0x25000605},
-	{0x0000a528, 0x3c022f04, 0x3c022f04, 0x2a000a03, 0x2a000a03},
-	{0x0000a52c, 0x41023e85, 0x41023e85, 0x2c000a04, 0x2c000a04},
-	{0x0000a530, 0x48023ec6, 0x48023ec6, 0x34000e20, 0x34000e20},
-	{0x0000a534, 0x4d023f01, 0x4d023f01, 0x35000e21, 0x35000e21},
-	{0x0000a538, 0x53023f4b, 0x53023f4b, 0x43000e62, 0x43000e62},
-	{0x0000a53c, 0x5a027f09, 0x5a027f09, 0x45000e63, 0x45000e63},
-	{0x0000a540, 0x5f027fc9, 0x5f027fc9, 0x49000e65, 0x49000e65},
-	{0x0000a544, 0x6502feca, 0x6502feca, 0x4b000e66, 0x4b000e66},
-	{0x0000a548, 0x6b02ff4a, 0x6b02ff4a, 0x4d001645, 0x4d001645},
-	{0x0000a54c, 0x7203feca, 0x7203feca, 0x51001865, 0x51001865},
-	{0x0000a550, 0x7703ff0b, 0x7703ff0b, 0x55001a86, 0x55001a86},
-	{0x0000a554, 0x7d06ffcb, 0x7d06ffcb, 0x57001ce9, 0x57001ce9},
-	{0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x5a001ceb, 0x5a001ceb},
-	{0x0000a55c, 0x8907ffcb, 0x8907ffcb, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a560, 0x900fff0b, 0x900fff0b, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a564, 0x960fffcb, 0x960fffcb, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a568, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a56c, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a570, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a574, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a578, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a57c, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb},
-	{0x0000b500, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b504, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b508, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b50c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b510, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b514, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b518, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b51c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b520, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b524, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b528, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b52c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b530, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b534, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b538, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b53c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b540, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b544, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b548, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b54c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b550, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b554, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b558, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b55c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b560, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b564, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b568, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b56c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b570, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b574, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b578, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b57c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x00016044, 0x05d6b2db, 0x05d6b2db, 0x05d6b2db, 0x05d6b2db},
-	{0x00016048, 0x6c924260, 0x6c924260, 0x6c924260, 0x6c924260},
-};
-
-static const u32 ar9485_1_1_radio_postamble[][2] = {
-	/* Addr        allmodes */
-	{0x0001609c, 0x0b283f31},
-	{0x000160ac, 0x24611800},
-	{0x000160b0, 0x03284f3e},
-	{0x0001610c, 0x00170000},
-	{0x00016140, 0x50804008},
-};
-
-static const u32 ar9485_1_1_mac_postamble[][5] = {
-	/* Addr        5G_HT20       5G_HT40       2G_HT40       2G_HT20 */
-	{0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160},
-	{0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c},
-	{0x000010b0, 0x00000e60, 0x00001cc0, 0x00007c70, 0x00003e38},
-	{0x00008014, 0x03e803e8, 0x07d007d0, 0x10801600, 0x08400b00},
-	{0x0000801c, 0x128d8027, 0x128d804f, 0x12e00057, 0x12e0002b},
-	{0x00008120, 0x08f04800, 0x08f04800, 0x08f04810, 0x08f04810},
-	{0x000081d0, 0x00003210, 0x00003210, 0x0000320a, 0x0000320a},
-	{0x00008318, 0x00003e80, 0x00007d00, 0x00006880, 0x00003440},
-};
+/* AR9485 1.0 */
 
-static const u32 ar9485_1_1_radio_core[][2] = {
-	/* Addr        allmodes */
-	{0x00016000, 0x36db6db6},
-	{0x00016004, 0x6db6db40},
-	{0x00016008, 0x73800000},
-	{0x0001600c, 0x00000000},
-	{0x00016040, 0x7f80fff8},
-	{0x0001604c, 0x000f0278},
-	{0x00016050, 0x4db6db8c},
-	{0x00016054, 0x6db60000},
-	{0x00016080, 0x00080000},
-	{0x00016084, 0x0e48048c},
-	{0x00016088, 0x14214514},
-	{0x0001608c, 0x119f081e},
-	{0x00016090, 0x24926490},
-	{0x00016098, 0xd28b3330},
-	{0x000160a0, 0xc2108ffe},
-	{0x000160a4, 0x812fc370},
-	{0x000160a8, 0x423c8000},
-	{0x000160b4, 0x92480040},
-	{0x000160c0, 0x006db6db},
-	{0x000160c4, 0x0186db60},
-	{0x000160c8, 0x6db6db6c},
-	{0x000160cc, 0x6de6fbe0},
-	{0x000160d0, 0xf7dfcf3c},
-	{0x00016100, 0x04cb0001},
-	{0x00016104, 0xfff80015},
-	{0x00016108, 0x00080010},
-	{0x00016144, 0x01884080},
-	{0x00016148, 0x00008040},
-	{0x00016240, 0x08400000},
-	{0x00016244, 0x1bf90f00},
-	{0x00016248, 0x00000000},
-	{0x0001624c, 0x00000000},
-	{0x00016280, 0x01000015},
-	{0x00016284, 0x00d30000},
-	{0x00016288, 0x00318000},
-	{0x0001628c, 0x50000000},
-	{0x00016290, 0x4b96210f},
-	{0x00016380, 0x00000000},
-	{0x00016384, 0x00000000},
-	{0x00016388, 0x00800700},
-	{0x0001638c, 0x00800700},
-	{0x00016390, 0x00800700},
-	{0x00016394, 0x00000000},
-	{0x00016398, 0x00000000},
-	{0x0001639c, 0x00000000},
-	{0x000163a0, 0x00000001},
-	{0x000163a4, 0x00000001},
-	{0x000163a8, 0x00000000},
-	{0x000163ac, 0x00000000},
-	{0x000163b0, 0x00000000},
-	{0x000163b4, 0x00000000},
-	{0x000163b8, 0x00000000},
-	{0x000163bc, 0x00000000},
-	{0x000163c0, 0x000000a0},
-	{0x000163c4, 0x000c0000},
-	{0x000163c8, 0x14021402},
-	{0x000163cc, 0x00001402},
-	{0x000163d0, 0x00000000},
-	{0x000163d4, 0x00000000},
-	{0x00016c40, 0x13188278},
-	{0x00016c44, 0x12000000},
-};
+#define ar9485_1_1_mac_postamble ar9300_2p2_mac_postamble
 
-static const u32 ar9485_1_1_pcie_phy_pll_on_clkreq_enable_L1[][2] = {
-	/* Addr        allmodes */
-	{0x00018c00, 0x18052e5e},
+static const u32 ar9485_1_1_pcie_phy_pll_on_clkreq_disable_L1[][2] = {
+	/* Addr      allmodes  */
+	{0x00018c00, 0x18012e5e},
 	{0x00018c04, 0x000801d8},
 	{0x00018c08, 0x0000080c},
 };
 
+static const u32 ar9485Common_wo_xlna_rx_gain_1_1[][2] = {
+	/* Addr      allmodes  */
+	{0x0000a000, 0x00060005},
+	{0x0000a004, 0x00810080},
+	{0x0000a008, 0x00830082},
+	{0x0000a00c, 0x00850084},
+	{0x0000a010, 0x01820181},
+	{0x0000a014, 0x01840183},
+	{0x0000a018, 0x01880185},
+	{0x0000a01c, 0x018a0189},
+	{0x0000a020, 0x02850284},
+	{0x0000a024, 0x02890288},
+	{0x0000a028, 0x028b028a},
+	{0x0000a02c, 0x03850384},
+	{0x0000a030, 0x03890388},
+	{0x0000a034, 0x038b038a},
+	{0x0000a038, 0x038d038c},
+	{0x0000a03c, 0x03910390},
+	{0x0000a040, 0x03930392},
+	{0x0000a044, 0x03950394},
+	{0x0000a048, 0x00000396},
+	{0x0000a04c, 0x00000000},
+	{0x0000a050, 0x00000000},
+	{0x0000a054, 0x00000000},
+	{0x0000a058, 0x00000000},
+	{0x0000a05c, 0x00000000},
+	{0x0000a060, 0x00000000},
+	{0x0000a064, 0x00000000},
+	{0x0000a068, 0x00000000},
+	{0x0000a06c, 0x00000000},
+	{0x0000a070, 0x00000000},
+	{0x0000a074, 0x00000000},
+	{0x0000a078, 0x00000000},
+	{0x0000a07c, 0x00000000},
+	{0x0000a080, 0x28282828},
+	{0x0000a084, 0x28282828},
+	{0x0000a088, 0x28282828},
+	{0x0000a08c, 0x28282828},
+	{0x0000a090, 0x28282828},
+	{0x0000a094, 0x24242428},
+	{0x0000a098, 0x171e1e1e},
+	{0x0000a09c, 0x02020b0b},
+	{0x0000a0a0, 0x02020202},
+	{0x0000a0a4, 0x00000000},
+	{0x0000a0a8, 0x00000000},
+	{0x0000a0ac, 0x00000000},
+	{0x0000a0b0, 0x00000000},
+	{0x0000a0b4, 0x00000000},
+	{0x0000a0b8, 0x00000000},
+	{0x0000a0bc, 0x00000000},
+	{0x0000a0c0, 0x22072208},
+	{0x0000a0c4, 0x22052206},
+	{0x0000a0c8, 0x22032204},
+	{0x0000a0cc, 0x22012202},
+	{0x0000a0d0, 0x221f2200},
+	{0x0000a0d4, 0x221d221e},
+	{0x0000a0d8, 0x33023303},
+	{0x0000a0dc, 0x33003301},
+	{0x0000a0e0, 0x331e331f},
+	{0x0000a0e4, 0x4402331d},
+	{0x0000a0e8, 0x44004401},
+	{0x0000a0ec, 0x441e441f},
+	{0x0000a0f0, 0x55025503},
+	{0x0000a0f4, 0x55005501},
+	{0x0000a0f8, 0x551e551f},
+	{0x0000a0fc, 0x6602551d},
+	{0x0000a100, 0x66006601},
+	{0x0000a104, 0x661e661f},
+	{0x0000a108, 0x7703661d},
+	{0x0000a10c, 0x77017702},
+	{0x0000a110, 0x00007700},
+	{0x0000a114, 0x00000000},
+	{0x0000a118, 0x00000000},
+	{0x0000a11c, 0x00000000},
+	{0x0000a120, 0x00000000},
+	{0x0000a124, 0x00000000},
+	{0x0000a128, 0x00000000},
+	{0x0000a12c, 0x00000000},
+	{0x0000a130, 0x00000000},
+	{0x0000a134, 0x00000000},
+	{0x0000a138, 0x00000000},
+	{0x0000a13c, 0x00000000},
+	{0x0000a140, 0x001f0000},
+	{0x0000a144, 0x111f1100},
+	{0x0000a148, 0x111d111e},
+	{0x0000a14c, 0x111b111c},
+	{0x0000a150, 0x22032204},
+	{0x0000a154, 0x22012202},
+	{0x0000a158, 0x221f2200},
+	{0x0000a15c, 0x221d221e},
+	{0x0000a160, 0x33013302},
+	{0x0000a164, 0x331f3300},
+	{0x0000a168, 0x4402331e},
+	{0x0000a16c, 0x44004401},
+	{0x0000a170, 0x441e441f},
+	{0x0000a174, 0x55015502},
+	{0x0000a178, 0x551f5500},
+	{0x0000a17c, 0x6602551e},
+	{0x0000a180, 0x66006601},
+	{0x0000a184, 0x661e661f},
+	{0x0000a188, 0x7703661d},
+	{0x0000a18c, 0x77017702},
+	{0x0000a190, 0x00007700},
+	{0x0000a194, 0x00000000},
+	{0x0000a198, 0x00000000},
+	{0x0000a19c, 0x00000000},
+	{0x0000a1a0, 0x00000000},
+	{0x0000a1a4, 0x00000000},
+	{0x0000a1a8, 0x00000000},
+	{0x0000a1ac, 0x00000000},
+	{0x0000a1b0, 0x00000000},
+	{0x0000a1b4, 0x00000000},
+	{0x0000a1b8, 0x00000000},
+	{0x0000a1bc, 0x00000000},
+	{0x0000a1c0, 0x00000000},
+	{0x0000a1c4, 0x00000000},
+	{0x0000a1c8, 0x00000000},
+	{0x0000a1cc, 0x00000000},
+	{0x0000a1d0, 0x00000000},
+	{0x0000a1d4, 0x00000000},
+	{0x0000a1d8, 0x00000000},
+	{0x0000a1dc, 0x00000000},
+	{0x0000a1e0, 0x00000000},
+	{0x0000a1e4, 0x00000000},
+	{0x0000a1e8, 0x00000000},
+	{0x0000a1ec, 0x00000000},
+	{0x0000a1f0, 0x00000396},
+	{0x0000a1f4, 0x00000396},
+	{0x0000a1f8, 0x00000396},
+	{0x0000a1fc, 0x00000296},
+};
+
 static const u32 ar9485Modes_high_power_tx_gain_1_1[][5] = {
-	/* Addr        5G_HT20       5G_HT40       2G_HT40       2G_HT20 */
+	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
 	{0x000098bc, 0x00000002, 0x00000002, 0x00000002, 0x00000002},
 	{0x0000a410, 0x000050d9, 0x000050d9, 0x000050d8, 0x000050d8},
 	{0x0000a458, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
@@ -681,8 +234,14 @@ static const u32 ar9485Modes_high_power_tx_gain_1_1[][5] = {
 	{0x00016048, 0x6c924260, 0x6c924260, 0x6c924260, 0x6c924260},
 };
 
+#define ar9485Modes_high_ob_db_tx_gain_1_1 ar9485Modes_high_power_tx_gain_1_1
+
+#define ar9485Modes_low_ob_db_tx_gain_1_1 ar9485Modes_high_ob_db_tx_gain_1_1
+
+#define ar9485_modes_lowest_ob_db_tx_gain_1_1 ar9485Modes_low_ob_db_tx_gain_1_1
+
 static const u32 ar9485_1_1[][2] = {
-	/* Addr        allmodes */
+	/* Addr      allmodes  */
 	{0x0000a580, 0x00000000},
 	{0x0000a584, 0x00000000},
 	{0x0000a588, 0x00000000},
@@ -701,194 +260,210 @@ static const u32 ar9485_1_1[][2] = {
 	{0x0000a5bc, 0x00000000},
 };
 
-static const u32 ar9485_modes_green_ob_db_tx_gain_1_1[][5] = {
-	/* Addr        5G_HT20       5G_HT40       2G_HT40       2G_HT20 */
-	{0x000098bc, 0x00000003, 0x00000003, 0x00000003, 0x00000003},
-	{0x0000a410, 0x000050d9, 0x000050d9, 0x000050d8, 0x000050d8},
-	{0x0000a458, 0x80000000, 0x80000000, 0x80000000, 0x80000000},
-	{0x0000a500, 0x00022200, 0x00022200, 0x00000006, 0x00000006},
-	{0x0000a504, 0x05062002, 0x05062002, 0x03000201, 0x03000201},
-	{0x0000a508, 0x0c002e00, 0x0c002e00, 0x06000203, 0x06000203},
-	{0x0000a50c, 0x11062202, 0x11062202, 0x0a000401, 0x0a000401},
-	{0x0000a510, 0x17022e00, 0x17022e00, 0x0e000403, 0x0e000403},
-	{0x0000a514, 0x1d000ec2, 0x1d000ec2, 0x12000405, 0x12000405},
-	{0x0000a518, 0x25020ec0, 0x25020ec0, 0x15000604, 0x15000604},
-	{0x0000a51c, 0x2b020ec3, 0x2b020ec3, 0x18000605, 0x18000605},
-	{0x0000a520, 0x2f001f04, 0x2f001f04, 0x1c000a04, 0x1c000a04},
-	{0x0000a524, 0x35001fc4, 0x35001fc4, 0x21000a06, 0x21000a06},
-	{0x0000a528, 0x3c022f04, 0x3c022f04, 0x29000a24, 0x29000a24},
-	{0x0000a52c, 0x41023e85, 0x41023e85, 0x2f000e21, 0x2f000e21},
-	{0x0000a530, 0x48023ec6, 0x48023ec6, 0x31000e20, 0x31000e20},
-	{0x0000a534, 0x4d023f01, 0x4d023f01, 0x33000e20, 0x33000e20},
-	{0x0000a538, 0x53023f4b, 0x53023f4b, 0x43000e62, 0x43000e62},
-	{0x0000a53c, 0x5a027f09, 0x5a027f09, 0x45000e63, 0x45000e63},
-	{0x0000a540, 0x5f027fc9, 0x5f027fc9, 0x49000e65, 0x49000e65},
-	{0x0000a544, 0x6502feca, 0x6502feca, 0x4b000e66, 0x4b000e66},
-	{0x0000a548, 0x6b02ff4a, 0x6b02ff4a, 0x4d001645, 0x4d001645},
-	{0x0000a54c, 0x7203feca, 0x7203feca, 0x51001865, 0x51001865},
-	{0x0000a550, 0x7703ff0b, 0x7703ff0b, 0x55001a86, 0x55001a86},
-	{0x0000a554, 0x7d06ffcb, 0x7d06ffcb, 0x57001ce9, 0x57001ce9},
-	{0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x5a001ceb, 0x5a001ceb},
-	{0x0000a55c, 0x8907ffcb, 0x8907ffcb, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a560, 0x900fff0b, 0x900fff0b, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a564, 0x960fffcb, 0x960fffcb, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a568, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a56c, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a570, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a574, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a578, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a57c, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb},
-	{0x0000b500, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a},
-	{0x0000b504, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a},
-	{0x0000b508, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a},
-	{0x0000b50c, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a},
-	{0x0000b510, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a},
-	{0x0000b514, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a},
-	{0x0000b518, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a},
-	{0x0000b51c, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a},
-	{0x0000b520, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a},
-	{0x0000b524, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a},
-	{0x0000b528, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a},
-	{0x0000b52c, 0x0000002a, 0x0000002a, 0x0000002a, 0x0000002a},
-	{0x0000b530, 0x0000003a, 0x0000003a, 0x0000003a, 0x0000003a},
-	{0x0000b534, 0x0000004a, 0x0000004a, 0x0000004a, 0x0000004a},
-	{0x0000b538, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b},
-	{0x0000b53c, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b},
-	{0x0000b540, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b},
-	{0x0000b544, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b},
-	{0x0000b548, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b},
-	{0x0000b54c, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b},
-	{0x0000b550, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b},
-	{0x0000b554, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b},
-	{0x0000b558, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b},
-	{0x0000b55c, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b},
-	{0x0000b560, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b},
-	{0x0000b564, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b},
-	{0x0000b568, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b},
-	{0x0000b56c, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b},
-	{0x0000b570, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b},
-	{0x0000b574, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b},
-	{0x0000b578, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b},
-	{0x0000b57c, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b},
-	{0x00016044, 0x05d6b2db, 0x05d6b2db, 0x05d6b2db, 0x05d6b2db},
-	{0x00016048, 0x6c924260, 0x6c924260, 0x6c924260, 0x6c924260},
-};
-
-static const u32 ar9485_1_1_pcie_phy_clkreq_disable_L1[][2] = {
-	/* Addr        allmodes */
-	{0x00018c00, 0x18013e5e},
-	{0x00018c04, 0x000801d8},
-	{0x00018c08, 0x0000080c},
-};
-
-static const u32 ar9485_1_1_soc_preamble[][2] = {
-	/* Addr        allmodes */
-	{0x00004014, 0xba280400},
-	{0x00004090, 0x00aa10aa},
-	{0x000040a4, 0x00a0c9c9},
-	{0x00007010, 0x00000022},
-	{0x00007020, 0x00000000},
-	{0x00007034, 0x00000002},
-	{0x00007038, 0x000004c2},
-	{0x00007048, 0x00000002},
-};
-
-static const u32 ar9485_1_1_baseband_core_txfir_coeff_japan_2484[][2] = {
-	/* Addr        allmodes */
-	{0x0000a398, 0x00000000},
-	{0x0000a39c, 0x6f7f0301},
-	{0x0000a3a0, 0xca9228ee},
-};
-
-static const u32 ar9485Modes_low_ob_db_tx_gain_1_1[][5] = {
-	/* Addr        5G_HT20       5G_HT40       2G_HT40       2G_HT20  */
-	{0x000098bc, 0x00000002, 0x00000002, 0x00000002, 0x00000002},
-	{0x0000a410, 0x000050d9, 0x000050d9, 0x000050d8, 0x000050d8},
-	{0x0000a458, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a500, 0x00022200, 0x00022200, 0x00000000, 0x00000000},
-	{0x0000a504, 0x05062002, 0x05062002, 0x04000002, 0x04000002},
-	{0x0000a508, 0x0c002e00, 0x0c002e00, 0x08000004, 0x08000004},
-	{0x0000a50c, 0x11062202, 0x11062202, 0x0d000200, 0x0d000200},
-	{0x0000a510, 0x17022e00, 0x17022e00, 0x11000202, 0x11000202},
-	{0x0000a514, 0x1d000ec2, 0x1d000ec2, 0x15000400, 0x15000400},
-	{0x0000a518, 0x25020ec0, 0x25020ec0, 0x19000402, 0x19000402},
-	{0x0000a51c, 0x2b020ec3, 0x2b020ec3, 0x1d000404, 0x1d000404},
-	{0x0000a520, 0x2f001f04, 0x2f001f04, 0x21000603, 0x21000603},
-	{0x0000a524, 0x35001fc4, 0x35001fc4, 0x25000605, 0x25000605},
-	{0x0000a528, 0x3c022f04, 0x3c022f04, 0x2a000a03, 0x2a000a03},
-	{0x0000a52c, 0x41023e85, 0x41023e85, 0x2c000a04, 0x2c000a04},
-	{0x0000a530, 0x48023ec6, 0x48023ec6, 0x34000e20, 0x34000e20},
-	{0x0000a534, 0x4d023f01, 0x4d023f01, 0x35000e21, 0x35000e21},
-	{0x0000a538, 0x53023f4b, 0x53023f4b, 0x43000e62, 0x43000e62},
-	{0x0000a53c, 0x5a027f09, 0x5a027f09, 0x45000e63, 0x45000e63},
-	{0x0000a540, 0x5f027fc9, 0x5f027fc9, 0x49000e65, 0x49000e65},
-	{0x0000a544, 0x6502feca, 0x6502feca, 0x4b000e66, 0x4b000e66},
-	{0x0000a548, 0x6b02ff4a, 0x6b02ff4a, 0x4d001645, 0x4d001645},
-	{0x0000a54c, 0x7203feca, 0x7203feca, 0x51001865, 0x51001865},
-	{0x0000a550, 0x7703ff0b, 0x7703ff0b, 0x55001a86, 0x55001a86},
-	{0x0000a554, 0x7d06ffcb, 0x7d06ffcb, 0x57001ce9, 0x57001ce9},
-	{0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x5a001ceb, 0x5a001ceb},
-	{0x0000a55c, 0x8907ffcb, 0x8907ffcb, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a560, 0x900fff0b, 0x900fff0b, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a564, 0x960fffcb, 0x960fffcb, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a568, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a56c, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a570, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a574, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a578, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb},
-	{0x0000a57c, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb},
-	{0x0000b500, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b504, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b508, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b50c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b510, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b514, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b518, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b51c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b520, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b524, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b528, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b52c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b530, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b534, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b538, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b53c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b540, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b544, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b548, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b54c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b550, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b554, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b558, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b55c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b560, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b564, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b568, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b56c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b570, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b574, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b578, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000b57c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x00016044, 0x05d6b2db, 0x05d6b2db, 0x05d6b2db, 0x05d6b2db},
-	{0x00016048, 0x6c924260, 0x6c924260, 0x6c924260, 0x6c924260},
-};
-
-static const u32 ar9485_fast_clock_1_1_baseband_postamble[][3] = {
-	/* Addr        5G_HT2        5G_HT40  */
-	{0x00009e00, 0x03721821, 0x03721821},
-	{0x0000a230, 0x0000400b, 0x00004016},
-	{0x0000a254, 0x00000898, 0x00001130},
+static const u32 ar9485_1_1_radio_core[][2] = {
+	/* Addr      allmodes  */
+	{0x00016000, 0x36db6db6},
+	{0x00016004, 0x6db6db40},
+	{0x00016008, 0x73800000},
+	{0x0001600c, 0x00000000},
+	{0x00016040, 0x7f80fff8},
+	{0x0001604c, 0x000f0278},
+	{0x00016050, 0x4db6db8c},
+	{0x00016054, 0x6db60000},
+	{0x00016080, 0x00080000},
+	{0x00016084, 0x0e48048c},
+	{0x00016088, 0x14214514},
+	{0x0001608c, 0x119f081e},
+	{0x00016090, 0x24926490},
+	{0x00016098, 0xd28b3330},
+	{0x000160a0, 0xc2108ffe},
+	{0x000160a4, 0x812fc370},
+	{0x000160a8, 0x423c8000},
+	{0x000160b4, 0x92480040},
+	{0x000160c0, 0x006db6db},
+	{0x000160c4, 0x0186db60},
+	{0x000160c8, 0x6db6db6c},
+	{0x000160cc, 0x6de6fbe0},
+	{0x000160d0, 0xf7dfcf3c},
+	{0x00016100, 0x04cb0001},
+	{0x00016104, 0xfff80015},
+	{0x00016108, 0x00080010},
+	{0x00016144, 0x01884080},
+	{0x00016148, 0x00008040},
+	{0x00016240, 0x08400000},
+	{0x00016244, 0x1bf90f00},
+	{0x00016248, 0x00000000},
+	{0x0001624c, 0x00000000},
+	{0x00016280, 0x01000015},
+	{0x00016284, 0x00d30000},
+	{0x00016288, 0x00318000},
+	{0x0001628c, 0x50000000},
+	{0x00016290, 0x4b96210f},
+	{0x00016380, 0x00000000},
+	{0x00016384, 0x00000000},
+	{0x00016388, 0x00800700},
+	{0x0001638c, 0x00800700},
+	{0x00016390, 0x00800700},
+	{0x00016394, 0x00000000},
+	{0x00016398, 0x00000000},
+	{0x0001639c, 0x00000000},
+	{0x000163a0, 0x00000001},
+	{0x000163a4, 0x00000001},
+	{0x000163a8, 0x00000000},
+	{0x000163ac, 0x00000000},
+	{0x000163b0, 0x00000000},
+	{0x000163b4, 0x00000000},
+	{0x000163b8, 0x00000000},
+	{0x000163bc, 0x00000000},
+	{0x000163c0, 0x000000a0},
+	{0x000163c4, 0x000c0000},
+	{0x000163c8, 0x14021402},
+	{0x000163cc, 0x00001402},
+	{0x000163d0, 0x00000000},
+	{0x000163d4, 0x00000000},
+	{0x00016c40, 0x13188278},
+	{0x00016c44, 0x12000000},
 };
 
-static const u32 ar9485_1_1_pcie_phy_pll_on_clkreq_disable_L1[][2] = {
-	/* Addr        allmodes  */
-	{0x00018c00, 0x18012e5e},
-	{0x00018c04, 0x000801d8},
-	{0x00018c08, 0x0000080c},
+static const u32 ar9485_1_1_baseband_core[][2] = {
+	/* Addr      allmodes  */
+	{0x00009800, 0xafe68e30},
+	{0x00009804, 0xfd14e000},
+	{0x00009808, 0x9c0a8f6b},
+	{0x0000980c, 0x04800000},
+	{0x00009814, 0x9280c00a},
+	{0x00009818, 0x00000000},
+	{0x0000981c, 0x00020028},
+	{0x00009834, 0x5f3ca3de},
+	{0x00009838, 0x0108ecff},
+	{0x0000983c, 0x14750600},
+	{0x00009880, 0x201fff00},
+	{0x00009884, 0x00001042},
+	{0x000098a4, 0x00200400},
+	{0x000098b0, 0x52440bbe},
+	{0x000098d0, 0x004b6a8e},
+	{0x000098d4, 0x00000820},
+	{0x000098dc, 0x00000000},
+	{0x000098f0, 0x00000000},
+	{0x000098f4, 0x00000000},
+	{0x00009c04, 0x00000000},
+	{0x00009c08, 0x03200000},
+	{0x00009c0c, 0x00000000},
+	{0x00009c10, 0x00000000},
+	{0x00009c14, 0x00046384},
+	{0x00009c18, 0x05b6b440},
+	{0x00009c1c, 0x00b6b440},
+	{0x00009d00, 0xc080a333},
+	{0x00009d04, 0x40206c10},
+	{0x00009d08, 0x009c4060},
+	{0x00009d0c, 0x1883800a},
+	{0x00009d10, 0x01834061},
+	{0x00009d14, 0x00c00400},
+	{0x00009d18, 0x00000000},
+	{0x00009d1c, 0x00000000},
+	{0x00009e08, 0x0038233c},
+	{0x00009e24, 0x9927b515},
+	{0x00009e28, 0x12ef0200},
+	{0x00009e30, 0x06336f77},
+	{0x00009e34, 0x6af6532f},
+	{0x00009e38, 0x0cc80c00},
+	{0x00009e40, 0x0d261820},
+	{0x00009e4c, 0x00001004},
+	{0x00009e50, 0x00ff03f1},
+	{0x00009fc0, 0x80be4788},
+	{0x00009fc4, 0x0001efb5},
+	{0x00009fcc, 0x40000014},
+	{0x0000a20c, 0x00000000},
+	{0x0000a210, 0x00000000},
+	{0x0000a220, 0x00000000},
+	{0x0000a224, 0x00000000},
+	{0x0000a228, 0x10002310},
+	{0x0000a23c, 0x00000000},
+	{0x0000a244, 0x0c000000},
+	{0x0000a2a0, 0x00000001},
+	{0x0000a2c0, 0x00000001},
+	{0x0000a2c8, 0x00000000},
+	{0x0000a2cc, 0x18c43433},
+	{0x0000a2d4, 0x00000000},
+	{0x0000a2dc, 0x00000000},
+	{0x0000a2e0, 0x00000000},
+	{0x0000a2e4, 0x00000000},
+	{0x0000a2e8, 0x00000000},
+	{0x0000a2ec, 0x00000000},
+	{0x0000a2f0, 0x00000000},
+	{0x0000a2f4, 0x00000000},
+	{0x0000a2f8, 0x00000000},
+	{0x0000a344, 0x00000000},
+	{0x0000a34c, 0x00000000},
+	{0x0000a350, 0x0000a000},
+	{0x0000a364, 0x00000000},
+	{0x0000a370, 0x00000000},
+	{0x0000a390, 0x00000001},
+	{0x0000a394, 0x00000444},
+	{0x0000a398, 0x001f0e0f},
+	{0x0000a39c, 0x0075393f},
+	{0x0000a3a0, 0xb79f6427},
+	{0x0000a3a4, 0x000000ff},
+	{0x0000a3a8, 0x3b3b3b3b},
+	{0x0000a3ac, 0x2f2f2f2f},
+	{0x0000a3c0, 0x20202020},
+	{0x0000a3c4, 0x22222220},
+	{0x0000a3c8, 0x20200020},
+	{0x0000a3cc, 0x20202020},
+	{0x0000a3d0, 0x20202020},
+	{0x0000a3d4, 0x20202020},
+	{0x0000a3d8, 0x20202020},
+	{0x0000a3dc, 0x20202020},
+	{0x0000a3e0, 0x20202020},
+	{0x0000a3e4, 0x20202020},
+	{0x0000a3e8, 0x20202020},
+	{0x0000a3ec, 0x20202020},
+	{0x0000a3f0, 0x00000000},
+	{0x0000a3f4, 0x00000006},
+	{0x0000a3f8, 0x0cdbd380},
+	{0x0000a3fc, 0x000f0f01},
+	{0x0000a400, 0x8fa91f01},
+	{0x0000a404, 0x00000000},
+	{0x0000a408, 0x0e79e5c6},
+	{0x0000a40c, 0x00820820},
+	{0x0000a414, 0x1ce739cf},
+	{0x0000a418, 0x2d0019ce},
+	{0x0000a41c, 0x1ce739ce},
+	{0x0000a420, 0x000001ce},
+	{0x0000a424, 0x1ce739ce},
+	{0x0000a428, 0x000001ce},
+	{0x0000a42c, 0x1ce739ce},
+	{0x0000a430, 0x1ce739ce},
+	{0x0000a434, 0x00000000},
+	{0x0000a438, 0x00001801},
+	{0x0000a43c, 0x00000000},
+	{0x0000a440, 0x00000000},
+	{0x0000a444, 0x00000000},
+	{0x0000a448, 0x04000000},
+	{0x0000a44c, 0x00000001},
+	{0x0000a450, 0x00010000},
+	{0x0000a5c4, 0xbfad9d74},
+	{0x0000a5c8, 0x0048060a},
+	{0x0000a5cc, 0x00000637},
+	{0x0000a760, 0x03020100},
+	{0x0000a764, 0x09080504},
+	{0x0000a768, 0x0d0c0b0a},
+	{0x0000a76c, 0x13121110},
+	{0x0000a770, 0x31301514},
+	{0x0000a774, 0x35343332},
+	{0x0000a778, 0x00000036},
+	{0x0000a780, 0x00000838},
+	{0x0000a7c0, 0x00000000},
+	{0x0000a7c4, 0xfffffffc},
+	{0x0000a7c8, 0x00000000},
+	{0x0000a7cc, 0x00000000},
+	{0x0000a7d0, 0x00000000},
+	{0x0000a7d4, 0x00000004},
+	{0x0000a7dc, 0x00000000},
 };
 
 static const u32 ar9485_common_rx_gain_1_1[][2] = {
-	/* Addr        allmodes */
+	/* Addr      allmodes  */
 	{0x0000a000, 0x00010000},
 	{0x0000a004, 0x00030002},
 	{0x0000a008, 0x00050004},
@@ -945,153 +520,14 @@ static const u32 ar9485_common_rx_gain_1_1[][2] = {
 	{0x0000a0d4, 0x22012202},
 	{0x0000a0d8, 0x221f2200},
 	{0x0000a0dc, 0x221d221e},
-	{0x0000a0e0, 0x33013302},
-	{0x0000a0e4, 0x331f3300},
-	{0x0000a0e8, 0x4402331e},
-	{0x0000a0ec, 0x44004401},
-	{0x0000a0f0, 0x441e441f},
-	{0x0000a0f4, 0x55015502},
-	{0x0000a0f8, 0x551f5500},
-	{0x0000a0fc, 0x6602551e},
-	{0x0000a100, 0x66006601},
-	{0x0000a104, 0x661e661f},
-	{0x0000a108, 0x7703661d},
-	{0x0000a10c, 0x77017702},
-	{0x0000a110, 0x00007700},
-	{0x0000a114, 0x00000000},
-	{0x0000a118, 0x00000000},
-	{0x0000a11c, 0x00000000},
-	{0x0000a120, 0x00000000},
-	{0x0000a124, 0x00000000},
-	{0x0000a128, 0x00000000},
-	{0x0000a12c, 0x00000000},
-	{0x0000a130, 0x00000000},
-	{0x0000a134, 0x00000000},
-	{0x0000a138, 0x00000000},
-	{0x0000a13c, 0x00000000},
-	{0x0000a140, 0x001f0000},
-	{0x0000a144, 0x111f1100},
-	{0x0000a148, 0x111d111e},
-	{0x0000a14c, 0x111b111c},
-	{0x0000a150, 0x22032204},
-	{0x0000a154, 0x22012202},
-	{0x0000a158, 0x221f2200},
-	{0x0000a15c, 0x221d221e},
-	{0x0000a160, 0x33013302},
-	{0x0000a164, 0x331f3300},
-	{0x0000a168, 0x4402331e},
-	{0x0000a16c, 0x44004401},
-	{0x0000a170, 0x441e441f},
-	{0x0000a174, 0x55015502},
-	{0x0000a178, 0x551f5500},
-	{0x0000a17c, 0x6602551e},
-	{0x0000a180, 0x66006601},
-	{0x0000a184, 0x661e661f},
-	{0x0000a188, 0x7703661d},
-	{0x0000a18c, 0x77017702},
-	{0x0000a190, 0x00007700},
-	{0x0000a194, 0x00000000},
-	{0x0000a198, 0x00000000},
-	{0x0000a19c, 0x00000000},
-	{0x0000a1a0, 0x00000000},
-	{0x0000a1a4, 0x00000000},
-	{0x0000a1a8, 0x00000000},
-	{0x0000a1ac, 0x00000000},
-	{0x0000a1b0, 0x00000000},
-	{0x0000a1b4, 0x00000000},
-	{0x0000a1b8, 0x00000000},
-	{0x0000a1bc, 0x00000000},
-	{0x0000a1c0, 0x00000000},
-	{0x0000a1c4, 0x00000000},
-	{0x0000a1c8, 0x00000000},
-	{0x0000a1cc, 0x00000000},
-	{0x0000a1d0, 0x00000000},
-	{0x0000a1d4, 0x00000000},
-	{0x0000a1d8, 0x00000000},
-	{0x0000a1dc, 0x00000000},
-	{0x0000a1e0, 0x00000000},
-	{0x0000a1e4, 0x00000000},
-	{0x0000a1e8, 0x00000000},
-	{0x0000a1ec, 0x00000000},
-	{0x0000a1f0, 0x00000396},
-	{0x0000a1f4, 0x00000396},
-	{0x0000a1f8, 0x00000396},
-	{0x0000a1fc, 0x00000296},
-};
-
-static const u32 ar9485_1_1_pcie_phy_clkreq_enable_L1[][2] = {
-	/* Addr        allmodes */
-	{0x00018c00, 0x18053e5e},
-	{0x00018c04, 0x000801d8},
-	{0x00018c08, 0x0000080c},
-};
-
-static const u32 ar9485Common_wo_xlna_rx_gain_1_1[][2] = {
-	/* Addr        allmodes */
-	{0x0000a000, 0x00060005},
-	{0x0000a004, 0x00810080},
-	{0x0000a008, 0x00830082},
-	{0x0000a00c, 0x00850084},
-	{0x0000a010, 0x01820181},
-	{0x0000a014, 0x01840183},
-	{0x0000a018, 0x01880185},
-	{0x0000a01c, 0x018a0189},
-	{0x0000a020, 0x02850284},
-	{0x0000a024, 0x02890288},
-	{0x0000a028, 0x028b028a},
-	{0x0000a02c, 0x03850384},
-	{0x0000a030, 0x03890388},
-	{0x0000a034, 0x038b038a},
-	{0x0000a038, 0x038d038c},
-	{0x0000a03c, 0x03910390},
-	{0x0000a040, 0x03930392},
-	{0x0000a044, 0x03950394},
-	{0x0000a048, 0x00000396},
-	{0x0000a04c, 0x00000000},
-	{0x0000a050, 0x00000000},
-	{0x0000a054, 0x00000000},
-	{0x0000a058, 0x00000000},
-	{0x0000a05c, 0x00000000},
-	{0x0000a060, 0x00000000},
-	{0x0000a064, 0x00000000},
-	{0x0000a068, 0x00000000},
-	{0x0000a06c, 0x00000000},
-	{0x0000a070, 0x00000000},
-	{0x0000a074, 0x00000000},
-	{0x0000a078, 0x00000000},
-	{0x0000a07c, 0x00000000},
-	{0x0000a080, 0x28282828},
-	{0x0000a084, 0x28282828},
-	{0x0000a088, 0x28282828},
-	{0x0000a08c, 0x28282828},
-	{0x0000a090, 0x28282828},
-	{0x0000a094, 0x24242428},
-	{0x0000a098, 0x171e1e1e},
-	{0x0000a09c, 0x02020b0b},
-	{0x0000a0a0, 0x02020202},
-	{0x0000a0a4, 0x00000000},
-	{0x0000a0a8, 0x00000000},
-	{0x0000a0ac, 0x00000000},
-	{0x0000a0b0, 0x00000000},
-	{0x0000a0b4, 0x00000000},
-	{0x0000a0b8, 0x00000000},
-	{0x0000a0bc, 0x00000000},
-	{0x0000a0c0, 0x22072208},
-	{0x0000a0c4, 0x22052206},
-	{0x0000a0c8, 0x22032204},
-	{0x0000a0cc, 0x22012202},
-	{0x0000a0d0, 0x221f2200},
-	{0x0000a0d4, 0x221d221e},
-	{0x0000a0d8, 0x33023303},
-	{0x0000a0dc, 0x33003301},
-	{0x0000a0e0, 0x331e331f},
-	{0x0000a0e4, 0x4402331d},
-	{0x0000a0e8, 0x44004401},
-	{0x0000a0ec, 0x441e441f},
-	{0x0000a0f0, 0x55025503},
-	{0x0000a0f4, 0x55005501},
-	{0x0000a0f8, 0x551e551f},
-	{0x0000a0fc, 0x6602551d},
+	{0x0000a0e0, 0x33013302},
+	{0x0000a0e4, 0x331f3300},
+	{0x0000a0e8, 0x4402331e},
+	{0x0000a0ec, 0x44004401},
+	{0x0000a0f0, 0x441e441f},
+	{0x0000a0f4, 0x55015502},
+	{0x0000a0f8, 0x551f5500},
+	{0x0000a0fc, 0x6602551e},
 	{0x0000a100, 0x66006601},
 	{0x0000a104, 0x661e661f},
 	{0x0000a108, 0x7703661d},
@@ -1158,4 +594,260 @@ static const u32 ar9485Common_wo_xlna_rx_gain_1_1[][2] = {
 	{0x0000a1fc, 0x00000296},
 };
 
-#endif
+static const u32 ar9485_1_1_pcie_phy_pll_on_clkreq_enable_L1[][2] = {
+	/* Addr      allmodes  */
+	{0x00018c00, 0x18052e5e},
+	{0x00018c04, 0x000801d8},
+	{0x00018c08, 0x0000080c},
+};
+
+static const u32 ar9485_1_1_pcie_phy_clkreq_enable_L1[][2] = {
+	/* Addr      allmodes  */
+	{0x00018c00, 0x18053e5e},
+	{0x00018c04, 0x000801d8},
+	{0x00018c08, 0x0000080c},
+};
+
+static const u32 ar9485_1_1_soc_preamble[][2] = {
+	/* Addr      allmodes  */
+	{0x00004014, 0xba280400},
+	{0x00004090, 0x00aa10aa},
+	{0x000040a4, 0x00a0c9c9},
+	{0x00007010, 0x00000022},
+	{0x00007020, 0x00000000},
+	{0x00007034, 0x00000002},
+	{0x00007038, 0x000004c2},
+	{0x00007048, 0x00000002},
+};
+
+static const u32 ar9485_fast_clock_1_1_baseband_postamble[][3] = {
+	/* Addr      5G_HT20     5G_HT40   */
+	{0x00009e00, 0x03721821, 0x03721821},
+	{0x0000a230, 0x0000400b, 0x00004016},
+	{0x0000a254, 0x00000898, 0x00001130},
+};
+
+static const u32 ar9485_1_1_baseband_postamble[][5] = {
+	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
+	{0x00009810, 0xd00a8005, 0xd00a8005, 0xd00a8005, 0xd00a8005},
+	{0x00009820, 0x206a002e, 0x206a002e, 0x206a002e, 0x206a002e},
+	{0x00009824, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0},
+	{0x00009828, 0x06903081, 0x06903081, 0x06903881, 0x06903881},
+	{0x0000982c, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4},
+	{0x00009830, 0x0000059c, 0x0000059c, 0x0000059c, 0x0000059c},
+	{0x00009c00, 0x00000044, 0x00000044, 0x00000044, 0x00000044},
+	{0x00009e00, 0x0372161e, 0x0372161e, 0x037216a0, 0x037216a0},
+	{0x00009e04, 0x00182020, 0x00182020, 0x00182020, 0x00182020},
+	{0x00009e0c, 0x6c4000e2, 0x6d4000e2, 0x6d4000e2, 0x6c4000e2},
+	{0x00009e10, 0x7ec88d2e, 0x7ec88d2e, 0x7ec80d2e, 0x7ec80d2e},
+	{0x00009e14, 0x31395d5e, 0x3139605e, 0x3139605e, 0x31395d5e},
+	{0x00009e18, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c},
+	{0x00009e20, 0x000003b5, 0x000003b5, 0x000003ce, 0x000003ce},
+	{0x00009e2c, 0x0000001c, 0x0000001c, 0x00000021, 0x00000021},
+	{0x00009e3c, 0xcf946220, 0xcf946220, 0xcf946222, 0xcf946222},
+	{0x00009e44, 0x02321e27, 0x02321e27, 0x02282324, 0x02282324},
+	{0x00009e48, 0x5030201a, 0x5030201a, 0x50302010, 0x50302010},
+	{0x00009fc8, 0x0003f000, 0x0003f000, 0x0001a000, 0x0001a000},
+	{0x0000a204, 0x01303fc0, 0x01303fc4, 0x01303fc4, 0x01303fc0},
+	{0x0000a208, 0x00000104, 0x00000104, 0x00000004, 0x00000004},
+	{0x0000a230, 0x0000400a, 0x00004014, 0x00004016, 0x0000400b},
+	{0x0000a234, 0x10000fff, 0x10000fff, 0x10000fff, 0x10000fff},
+	{0x0000a238, 0xffb81018, 0xffb81018, 0xffb81018, 0xffb81018},
+	{0x0000a250, 0x00000000, 0x00000000, 0x00000210, 0x00000108},
+	{0x0000a254, 0x000007d0, 0x00000fa0, 0x00001130, 0x00000898},
+	{0x0000a258, 0x02020002, 0x02020002, 0x02020002, 0x02020002},
+	{0x0000a25c, 0x01000e0e, 0x01000e0e, 0x01000e0e, 0x01000e0e},
+	{0x0000a260, 0x3a021501, 0x3a021501, 0x3a021501, 0x3a021501},
+	{0x0000a264, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e},
+	{0x0000a280, 0x00000007, 0x00000007, 0x0000000b, 0x0000000b},
+	{0x0000a284, 0x00000000, 0x00000000, 0x000002a0, 0x000002a0},
+	{0x0000a288, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a28c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a2c4, 0x00158d18, 0x00158d18, 0x00158d18, 0x00158d18},
+	{0x0000a2d0, 0x00071981, 0x00071981, 0x00071982, 0x00071982},
+	{0x0000a2d8, 0xf999a83a, 0xf999a83a, 0xf999a83a, 0xf999a83a},
+	{0x0000a358, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000be04, 0x00802020, 0x00802020, 0x00802020, 0x00802020},
+	{0x0000be18, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+};
+
+static const u32 ar9485_1_1_pcie_phy_clkreq_disable_L1[][2] = {
+	/* Addr      allmodes  */
+	{0x00018c00, 0x18013e5e},
+	{0x00018c04, 0x000801d8},
+	{0x00018c08, 0x0000080c},
+};
+
+static const u32 ar9485_1_1_radio_postamble[][2] = {
+	/* Addr      allmodes  */
+	{0x0001609c, 0x0b283f31},
+	{0x000160ac, 0x24611800},
+	{0x000160b0, 0x03284f3e},
+	{0x0001610c, 0x00170000},
+	{0x00016140, 0x50804008},
+};
+
+static const u32 ar9485_1_1_mac_core[][2] = {
+	/* Addr      allmodes  */
+	{0x00000008, 0x00000000},
+	{0x00000030, 0x00020085},
+	{0x00000034, 0x00000005},
+	{0x00000040, 0x00000000},
+	{0x00000044, 0x00000000},
+	{0x00000048, 0x00000008},
+	{0x0000004c, 0x00000010},
+	{0x00000050, 0x00000000},
+	{0x00001040, 0x002ffc0f},
+	{0x00001044, 0x002ffc0f},
+	{0x00001048, 0x002ffc0f},
+	{0x0000104c, 0x002ffc0f},
+	{0x00001050, 0x002ffc0f},
+	{0x00001054, 0x002ffc0f},
+	{0x00001058, 0x002ffc0f},
+	{0x0000105c, 0x002ffc0f},
+	{0x00001060, 0x002ffc0f},
+	{0x00001064, 0x002ffc0f},
+	{0x000010f0, 0x00000100},
+	{0x00001270, 0x00000000},
+	{0x000012b0, 0x00000000},
+	{0x000012f0, 0x00000000},
+	{0x0000143c, 0x00000000},
+	{0x0000147c, 0x00000000},
+	{0x00008000, 0x00000000},
+	{0x00008004, 0x00000000},
+	{0x00008008, 0x00000000},
+	{0x0000800c, 0x00000000},
+	{0x00008018, 0x00000000},
+	{0x00008020, 0x00000000},
+	{0x00008038, 0x00000000},
+	{0x0000803c, 0x00000000},
+	{0x00008040, 0x00000000},
+	{0x00008044, 0x00000000},
+	{0x00008048, 0x00000000},
+	{0x0000804c, 0xffffffff},
+	{0x00008054, 0x00000000},
+	{0x00008058, 0x00000000},
+	{0x0000805c, 0x000fc78f},
+	{0x00008060, 0x0000000f},
+	{0x00008064, 0x00000000},
+	{0x00008070, 0x00000310},
+	{0x00008074, 0x00000020},
+	{0x00008078, 0x00000000},
+	{0x0000809c, 0x0000000f},
+	{0x000080a0, 0x00000000},
+	{0x000080a4, 0x02ff0000},
+	{0x000080a8, 0x0e070605},
+	{0x000080ac, 0x0000000d},
+	{0x000080b0, 0x00000000},
+	{0x000080b4, 0x00000000},
+	{0x000080b8, 0x00000000},
+	{0x000080bc, 0x00000000},
+	{0x000080c0, 0x2a800000},
+	{0x000080c4, 0x06900168},
+	{0x000080c8, 0x13881c22},
+	{0x000080cc, 0x01f40000},
+	{0x000080d0, 0x00252500},
+	{0x000080d4, 0x00a00000},
+	{0x000080d8, 0x00400000},
+	{0x000080dc, 0x00000000},
+	{0x000080e0, 0xffffffff},
+	{0x000080e4, 0x0000ffff},
+	{0x000080e8, 0x3f3f3f3f},
+	{0x000080ec, 0x00000000},
+	{0x000080f0, 0x00000000},
+	{0x000080f4, 0x00000000},
+	{0x000080fc, 0x00020000},
+	{0x00008100, 0x00000000},
+	{0x00008108, 0x00000052},
+	{0x0000810c, 0x00000000},
+	{0x00008110, 0x00000000},
+	{0x00008114, 0x000007ff},
+	{0x00008118, 0x000000aa},
+	{0x0000811c, 0x00003210},
+	{0x00008124, 0x00000000},
+	{0x00008128, 0x00000000},
+	{0x0000812c, 0x00000000},
+	{0x00008130, 0x00000000},
+	{0x00008134, 0x00000000},
+	{0x00008138, 0x00000000},
+	{0x0000813c, 0x0000ffff},
+	{0x00008144, 0xffffffff},
+	{0x00008168, 0x00000000},
+	{0x0000816c, 0x00000000},
+	{0x00008170, 0x18486200},
+	{0x00008174, 0x33332210},
+	{0x00008178, 0x00000000},
+	{0x0000817c, 0x00020000},
+	{0x000081c0, 0x00000000},
+	{0x000081c4, 0x33332210},
+	{0x000081d4, 0x00000000},
+	{0x000081ec, 0x00000000},
+	{0x000081f0, 0x00000000},
+	{0x000081f4, 0x00000000},
+	{0x000081f8, 0x00000000},
+	{0x000081fc, 0x00000000},
+	{0x00008240, 0x00100000},
+	{0x00008244, 0x0010f400},
+	{0x00008248, 0x00000800},
+	{0x0000824c, 0x0001e800},
+	{0x00008250, 0x00000000},
+	{0x00008254, 0x00000000},
+	{0x00008258, 0x00000000},
+	{0x0000825c, 0x40000000},
+	{0x00008260, 0x00080922},
+	{0x00008264, 0x9ca00010},
+	{0x00008268, 0xffffffff},
+	{0x0000826c, 0x0000ffff},
+	{0x00008270, 0x00000000},
+	{0x00008274, 0x40000000},
+	{0x00008278, 0x003e4180},
+	{0x0000827c, 0x00000004},
+	{0x00008284, 0x0000002c},
+	{0x00008288, 0x0000002c},
+	{0x0000828c, 0x000000ff},
+	{0x00008294, 0x00000000},
+	{0x00008298, 0x00000000},
+	{0x0000829c, 0x00000000},
+	{0x00008300, 0x00000140},
+	{0x00008314, 0x00000000},
+	{0x0000831c, 0x0000010d},
+	{0x00008328, 0x00000000},
+	{0x0000832c, 0x00000007},
+	{0x00008330, 0x00000302},
+	{0x00008334, 0x00000700},
+	{0x00008338, 0x00ff0000},
+	{0x0000833c, 0x02400000},
+	{0x00008340, 0x000107ff},
+	{0x00008344, 0xa248105b},
+	{0x00008348, 0x008f0000},
+	{0x0000835c, 0x00000000},
+	{0x00008360, 0xffffffff},
+	{0x00008364, 0xffffffff},
+	{0x00008368, 0x00000000},
+	{0x00008370, 0x00000000},
+	{0x00008374, 0x000000ff},
+	{0x00008378, 0x00000000},
+	{0x0000837c, 0x00000000},
+	{0x00008380, 0xffffffff},
+	{0x00008384, 0xffffffff},
+	{0x00008390, 0xffffffff},
+	{0x00008394, 0xffffffff},
+	{0x00008398, 0x00000000},
+	{0x0000839c, 0x00000000},
+	{0x000083a0, 0x00000000},
+	{0x000083a4, 0x0000fa14},
+	{0x000083a8, 0x000f0c00},
+	{0x000083ac, 0x33332210},
+	{0x000083b0, 0x33332210},
+	{0x000083b4, 0x33332210},
+	{0x000083b8, 0x33332210},
+	{0x000083bc, 0x00000000},
+	{0x000083c0, 0x00000000},
+	{0x000083c4, 0x00000000},
+	{0x000083c8, 0x00000000},
+	{0x000083cc, 0x00000200},
+	{0x000083d0, 0x000301ff},
+};
+
+#endif /* INITVALS_9485_H */
diff --git a/drivers/net/wireless/ath/ath9k/ar9580_1p0_initvals.h b/drivers/net/wireless/ath/ath9k/ar9580_1p0_initvals.h
index 06b3f0d..6e1915a 100644
--- a/drivers/net/wireless/ath/ath9k/ar9580_1p0_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9580_1p0_initvals.h
@@ -1,5 +1,6 @@
 /*
- * Copyright (c) 2010 Atheros Communications Inc.
+ * Copyright (c) 2010-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2012 Qualcomm Atheros Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -19,18 +20,7 @@
 
 /* AR9580 1.0 */
 
-static const u32 ar9580_1p0_modes_fast_clock[][3] = {
-	/* Addr      5G_HT20     5G_HT40   */
-	{0x00001030, 0x00000268, 0x000004d0},
-	{0x00001070, 0x0000018c, 0x00000318},
-	{0x000010b0, 0x00000fd0, 0x00001fa0},
-	{0x00008014, 0x044c044c, 0x08980898},
-	{0x0000801c, 0x148ec02b, 0x148ec057},
-	{0x00008318, 0x000044c0, 0x00008980},
-	{0x00009e00, 0x0372131c, 0x0372131c},
-	{0x0000a230, 0x0000000b, 0x00000016},
-	{0x0000a254, 0x00000898, 0x00001130},
-};
+#define ar9580_1p0_modes_fast_clock ar9300Modes_fast_clock_2p2
 
 static const u32 ar9580_1p0_radio_postamble[][5] = {
 	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
@@ -208,17 +198,7 @@ static const u32 ar9580_1p0_baseband_core[][2] = {
 	{0x0000c420, 0x00000000},
 };
 
-static const u32 ar9580_1p0_mac_postamble[][5] = {
-	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
-	{0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160},
-	{0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c},
-	{0x000010b0, 0x00000e60, 0x00001cc0, 0x00007c70, 0x00003e38},
-	{0x00008014, 0x03e803e8, 0x07d007d0, 0x10801600, 0x08400b00},
-	{0x0000801c, 0x128d8027, 0x128d804f, 0x12e00057, 0x12e0002b},
-	{0x00008120, 0x08f04800, 0x08f04800, 0x08f04810, 0x08f04810},
-	{0x000081d0, 0x00003210, 0x00003210, 0x0000320a, 0x0000320a},
-	{0x00008318, 0x00003e80, 0x00007d00, 0x00006880, 0x00003440},
-};
+#define ar9580_1p0_mac_postamble ar9300_2p2_mac_postamble
 
 static const u32 ar9580_1p0_low_ob_db_tx_gain_table[][5] = {
 	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
@@ -326,111 +306,7 @@ static const u32 ar9580_1p0_low_ob_db_tx_gain_table[][5] = {
 	{0x00016868, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c},
 };
 
-static const u32 ar9580_1p0_high_power_tx_gain_table[][5] = {
-	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
-	{0x0000a2dc, 0x0380c7fc, 0x0380c7fc, 0x03aaa352, 0x03aaa352},
-	{0x0000a2e0, 0x0000f800, 0x0000f800, 0x03ccc584, 0x03ccc584},
-	{0x0000a2e4, 0x03ff0000, 0x03ff0000, 0x03f0f800, 0x03f0f800},
-	{0x0000a2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
-	{0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9},
-	{0x0000a500, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a504, 0x06000003, 0x06000003, 0x04000002, 0x04000002},
-	{0x0000a508, 0x0a000020, 0x0a000020, 0x08000004, 0x08000004},
-	{0x0000a50c, 0x10000023, 0x10000023, 0x0b000200, 0x0b000200},
-	{0x0000a510, 0x16000220, 0x16000220, 0x0f000202, 0x0f000202},
-	{0x0000a514, 0x1c000223, 0x1c000223, 0x12000400, 0x12000400},
-	{0x0000a518, 0x21002220, 0x21002220, 0x16000402, 0x16000402},
-	{0x0000a51c, 0x27002223, 0x27002223, 0x19000404, 0x19000404},
-	{0x0000a520, 0x2b022220, 0x2b022220, 0x1c000603, 0x1c000603},
-	{0x0000a524, 0x2f022222, 0x2f022222, 0x21000a02, 0x21000a02},
-	{0x0000a528, 0x34022225, 0x34022225, 0x25000a04, 0x25000a04},
-	{0x0000a52c, 0x3a02222a, 0x3a02222a, 0x28000a20, 0x28000a20},
-	{0x0000a530, 0x3e02222c, 0x3e02222c, 0x2c000e20, 0x2c000e20},
-	{0x0000a534, 0x4202242a, 0x4202242a, 0x30000e22, 0x30000e22},
-	{0x0000a538, 0x4702244a, 0x4702244a, 0x34000e24, 0x34000e24},
-	{0x0000a53c, 0x4b02244c, 0x4b02244c, 0x38001640, 0x38001640},
-	{0x0000a540, 0x4e02246c, 0x4e02246c, 0x3c001660, 0x3c001660},
-	{0x0000a544, 0x5302266c, 0x5302266c, 0x3f001861, 0x3f001861},
-	{0x0000a548, 0x5702286c, 0x5702286c, 0x43001a81, 0x43001a81},
-	{0x0000a54c, 0x5c02486b, 0x5c02486b, 0x47001a83, 0x47001a83},
-	{0x0000a550, 0x61024a6c, 0x61024a6c, 0x4a001c84, 0x4a001c84},
-	{0x0000a554, 0x66026a6c, 0x66026a6c, 0x4e001ce3, 0x4e001ce3},
-	{0x0000a558, 0x6b026e6c, 0x6b026e6c, 0x52001ce5, 0x52001ce5},
-	{0x0000a55c, 0x7002708c, 0x7002708c, 0x56001ce9, 0x56001ce9},
-	{0x0000a560, 0x7302b08a, 0x7302b08a, 0x5a001ceb, 0x5a001ceb},
-	{0x0000a564, 0x7702b08c, 0x7702b08c, 0x5d001eec, 0x5d001eec},
-	{0x0000a568, 0x7702b08c, 0x7702b08c, 0x5d001eec, 0x5d001eec},
-	{0x0000a56c, 0x7702b08c, 0x7702b08c, 0x5d001eec, 0x5d001eec},
-	{0x0000a570, 0x7702b08c, 0x7702b08c, 0x5d001eec, 0x5d001eec},
-	{0x0000a574, 0x7702b08c, 0x7702b08c, 0x5d001eec, 0x5d001eec},
-	{0x0000a578, 0x7702b08c, 0x7702b08c, 0x5d001eec, 0x5d001eec},
-	{0x0000a57c, 0x7702b08c, 0x7702b08c, 0x5d001eec, 0x5d001eec},
-	{0x0000a580, 0x00800000, 0x00800000, 0x00800000, 0x00800000},
-	{0x0000a584, 0x06800003, 0x06800003, 0x04800002, 0x04800002},
-	{0x0000a588, 0x0a800020, 0x0a800020, 0x08800004, 0x08800004},
-	{0x0000a58c, 0x10800023, 0x10800023, 0x0b800200, 0x0b800200},
-	{0x0000a590, 0x16800220, 0x16800220, 0x0f800202, 0x0f800202},
-	{0x0000a594, 0x1c800223, 0x1c800223, 0x12800400, 0x12800400},
-	{0x0000a598, 0x21802220, 0x21802220, 0x16800402, 0x16800402},
-	{0x0000a59c, 0x27802223, 0x27802223, 0x19800404, 0x19800404},
-	{0x0000a5a0, 0x2b822220, 0x2b822220, 0x1c800603, 0x1c800603},
-	{0x0000a5a4, 0x2f822222, 0x2f822222, 0x21800a02, 0x21800a02},
-	{0x0000a5a8, 0x34822225, 0x34822225, 0x25800a04, 0x25800a04},
-	{0x0000a5ac, 0x3a82222a, 0x3a82222a, 0x28800a20, 0x28800a20},
-	{0x0000a5b0, 0x3e82222c, 0x3e82222c, 0x2c800e20, 0x2c800e20},
-	{0x0000a5b4, 0x4282242a, 0x4282242a, 0x30800e22, 0x30800e22},
-	{0x0000a5b8, 0x4782244a, 0x4782244a, 0x34800e24, 0x34800e24},
-	{0x0000a5bc, 0x4b82244c, 0x4b82244c, 0x38801640, 0x38801640},
-	{0x0000a5c0, 0x4e82246c, 0x4e82246c, 0x3c801660, 0x3c801660},
-	{0x0000a5c4, 0x5382266c, 0x5382266c, 0x3f801861, 0x3f801861},
-	{0x0000a5c8, 0x5782286c, 0x5782286c, 0x43801a81, 0x43801a81},
-	{0x0000a5cc, 0x5c82486b, 0x5c82486b, 0x47801a83, 0x47801a83},
-	{0x0000a5d0, 0x61824a6c, 0x61824a6c, 0x4a801c84, 0x4a801c84},
-	{0x0000a5d4, 0x66826a6c, 0x66826a6c, 0x4e801ce3, 0x4e801ce3},
-	{0x0000a5d8, 0x6b826e6c, 0x6b826e6c, 0x52801ce5, 0x52801ce5},
-	{0x0000a5dc, 0x7082708c, 0x7082708c, 0x56801ce9, 0x56801ce9},
-	{0x0000a5e0, 0x7382b08a, 0x7382b08a, 0x5a801ceb, 0x5a801ceb},
-	{0x0000a5e4, 0x7782b08c, 0x7782b08c, 0x5d801eec, 0x5d801eec},
-	{0x0000a5e8, 0x7782b08c, 0x7782b08c, 0x5d801eec, 0x5d801eec},
-	{0x0000a5ec, 0x7782b08c, 0x7782b08c, 0x5d801eec, 0x5d801eec},
-	{0x0000a5f0, 0x7782b08c, 0x7782b08c, 0x5d801eec, 0x5d801eec},
-	{0x0000a5f4, 0x7782b08c, 0x7782b08c, 0x5d801eec, 0x5d801eec},
-	{0x0000a5f8, 0x7782b08c, 0x7782b08c, 0x5d801eec, 0x5d801eec},
-	{0x0000a5fc, 0x7782b08c, 0x7782b08c, 0x5d801eec, 0x5d801eec},
-	{0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a60c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a610, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a614, 0x01404000, 0x01404000, 0x01404000, 0x01404000},
-	{0x0000a618, 0x01404501, 0x01404501, 0x01404501, 0x01404501},
-	{0x0000a61c, 0x02008802, 0x02008802, 0x02008501, 0x02008501},
-	{0x0000a620, 0x0300cc03, 0x0300cc03, 0x0280ca03, 0x0280ca03},
-	{0x0000a624, 0x0300cc03, 0x0300cc03, 0x03010c04, 0x03010c04},
-	{0x0000a628, 0x0300cc03, 0x0300cc03, 0x04014c04, 0x04014c04},
-	{0x0000a62c, 0x03810c03, 0x03810c03, 0x04015005, 0x04015005},
-	{0x0000a630, 0x03810e04, 0x03810e04, 0x04015005, 0x04015005},
-	{0x0000a634, 0x03810e04, 0x03810e04, 0x04015005, 0x04015005},
-	{0x0000a638, 0x03810e04, 0x03810e04, 0x04015005, 0x04015005},
-	{0x0000a63c, 0x03810e04, 0x03810e04, 0x04015005, 0x04015005},
-	{0x0000b2dc, 0x0380c7fc, 0x0380c7fc, 0x03aaa352, 0x03aaa352},
-	{0x0000b2e0, 0x0000f800, 0x0000f800, 0x03ccc584, 0x03ccc584},
-	{0x0000b2e4, 0x03ff0000, 0x03ff0000, 0x03f0f800, 0x03f0f800},
-	{0x0000b2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
-	{0x0000c2dc, 0x0380c7fc, 0x0380c7fc, 0x03aaa352, 0x03aaa352},
-	{0x0000c2e0, 0x0000f800, 0x0000f800, 0x03ccc584, 0x03ccc584},
-	{0x0000c2e4, 0x03ff0000, 0x03ff0000, 0x03f0f800, 0x03f0f800},
-	{0x0000c2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
-	{0x00016044, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4},
-	{0x00016048, 0x66480001, 0x66480001, 0x66480001, 0x66480001},
-	{0x00016068, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c},
-	{0x00016444, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4},
-	{0x00016448, 0x66480001, 0x66480001, 0x66480001, 0x66480001},
-	{0x00016468, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c},
-	{0x00016844, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4},
-	{0x00016848, 0x66480001, 0x66480001, 0x66480001, 0x66480001},
-	{0x00016868, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c},
-};
+#define ar9580_1p0_high_power_tx_gain_table ar9580_1p0_low_ob_db_tx_gain_table
 
 static const u32 ar9580_1p0_lowest_ob_db_tx_gain_table[][5] = {
 	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
@@ -538,12 +414,7 @@ static const u32 ar9580_1p0_lowest_ob_db_tx_gain_table[][5] = {
 	{0x00016868, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c},
 };
 
-static const u32 ar9580_1p0_baseband_core_txfir_coeff_japan_2484[][2] = {
-	/* Addr      allmodes  */
-	{0x0000a398, 0x00000000},
-	{0x0000a39c, 0x6f7f0301},
-	{0x0000a3a0, 0xca9228ee},
-};
+#define ar9580_1p0_baseband_core_txfir_coeff_japan_2484 ar9462_2p0_baseband_core_txfir_coeff_japan_2484
 
 static const u32 ar9580_1p0_mac_core[][2] = {
 	/* Addr      allmodes  */
@@ -808,376 +679,11 @@ static const u32 ar9580_1p0_mixed_ob_db_tx_gain_table[][5] = {
 	{0x00016868, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c},
 };
 
-static const u32 ar9580_1p0_wo_xlna_rx_gain_table[][2] = {
-	/* Addr      allmodes  */
-	{0x0000a000, 0x00010000},
-	{0x0000a004, 0x00030002},
-	{0x0000a008, 0x00050004},
-	{0x0000a00c, 0x00810080},
-	{0x0000a010, 0x00830082},
-	{0x0000a014, 0x01810180},
-	{0x0000a018, 0x01830182},
-	{0x0000a01c, 0x01850184},
-	{0x0000a020, 0x01890188},
-	{0x0000a024, 0x018b018a},
-	{0x0000a028, 0x018d018c},
-	{0x0000a02c, 0x03820190},
-	{0x0000a030, 0x03840383},
-	{0x0000a034, 0x03880385},
-	{0x0000a038, 0x038a0389},
-	{0x0000a03c, 0x038c038b},
-	{0x0000a040, 0x0390038d},
-	{0x0000a044, 0x03920391},
-	{0x0000a048, 0x03940393},
-	{0x0000a04c, 0x03960395},
-	{0x0000a050, 0x00000000},
-	{0x0000a054, 0x00000000},
-	{0x0000a058, 0x00000000},
-	{0x0000a05c, 0x00000000},
-	{0x0000a060, 0x00000000},
-	{0x0000a064, 0x00000000},
-	{0x0000a068, 0x00000000},
-	{0x0000a06c, 0x00000000},
-	{0x0000a070, 0x00000000},
-	{0x0000a074, 0x00000000},
-	{0x0000a078, 0x00000000},
-	{0x0000a07c, 0x00000000},
-	{0x0000a080, 0x29292929},
-	{0x0000a084, 0x29292929},
-	{0x0000a088, 0x29292929},
-	{0x0000a08c, 0x29292929},
-	{0x0000a090, 0x22292929},
-	{0x0000a094, 0x1d1d2222},
-	{0x0000a098, 0x0c111117},
-	{0x0000a09c, 0x00030303},
-	{0x0000a0a0, 0x00000000},
-	{0x0000a0a4, 0x00000000},
-	{0x0000a0a8, 0x00000000},
-	{0x0000a0ac, 0x00000000},
-	{0x0000a0b0, 0x00000000},
-	{0x0000a0b4, 0x00000000},
-	{0x0000a0b8, 0x00000000},
-	{0x0000a0bc, 0x00000000},
-	{0x0000a0c0, 0x001f0000},
-	{0x0000a0c4, 0x01000101},
-	{0x0000a0c8, 0x011e011f},
-	{0x0000a0cc, 0x011c011d},
-	{0x0000a0d0, 0x02030204},
-	{0x0000a0d4, 0x02010202},
-	{0x0000a0d8, 0x021f0200},
-	{0x0000a0dc, 0x0302021e},
-	{0x0000a0e0, 0x03000301},
-	{0x0000a0e4, 0x031e031f},
-	{0x0000a0e8, 0x0402031d},
-	{0x0000a0ec, 0x04000401},
-	{0x0000a0f0, 0x041e041f},
-	{0x0000a0f4, 0x0502041d},
-	{0x0000a0f8, 0x05000501},
-	{0x0000a0fc, 0x051e051f},
-	{0x0000a100, 0x06010602},
-	{0x0000a104, 0x061f0600},
-	{0x0000a108, 0x061d061e},
-	{0x0000a10c, 0x07020703},
-	{0x0000a110, 0x07000701},
-	{0x0000a114, 0x00000000},
-	{0x0000a118, 0x00000000},
-	{0x0000a11c, 0x00000000},
-	{0x0000a120, 0x00000000},
-	{0x0000a124, 0x00000000},
-	{0x0000a128, 0x00000000},
-	{0x0000a12c, 0x00000000},
-	{0x0000a130, 0x00000000},
-	{0x0000a134, 0x00000000},
-	{0x0000a138, 0x00000000},
-	{0x0000a13c, 0x00000000},
-	{0x0000a140, 0x001f0000},
-	{0x0000a144, 0x01000101},
-	{0x0000a148, 0x011e011f},
-	{0x0000a14c, 0x011c011d},
-	{0x0000a150, 0x02030204},
-	{0x0000a154, 0x02010202},
-	{0x0000a158, 0x021f0200},
-	{0x0000a15c, 0x0302021e},
-	{0x0000a160, 0x03000301},
-	{0x0000a164, 0x031e031f},
-	{0x0000a168, 0x0402031d},
-	{0x0000a16c, 0x04000401},
-	{0x0000a170, 0x041e041f},
-	{0x0000a174, 0x0502041d},
-	{0x0000a178, 0x05000501},
-	{0x0000a17c, 0x051e051f},
-	{0x0000a180, 0x06010602},
-	{0x0000a184, 0x061f0600},
-	{0x0000a188, 0x061d061e},
-	{0x0000a18c, 0x07020703},
-	{0x0000a190, 0x07000701},
-	{0x0000a194, 0x00000000},
-	{0x0000a198, 0x00000000},
-	{0x0000a19c, 0x00000000},
-	{0x0000a1a0, 0x00000000},
-	{0x0000a1a4, 0x00000000},
-	{0x0000a1a8, 0x00000000},
-	{0x0000a1ac, 0x00000000},
-	{0x0000a1b0, 0x00000000},
-	{0x0000a1b4, 0x00000000},
-	{0x0000a1b8, 0x00000000},
-	{0x0000a1bc, 0x00000000},
-	{0x0000a1c0, 0x00000000},
-	{0x0000a1c4, 0x00000000},
-	{0x0000a1c8, 0x00000000},
-	{0x0000a1cc, 0x00000000},
-	{0x0000a1d0, 0x00000000},
-	{0x0000a1d4, 0x00000000},
-	{0x0000a1d8, 0x00000000},
-	{0x0000a1dc, 0x00000000},
-	{0x0000a1e0, 0x00000000},
-	{0x0000a1e4, 0x00000000},
-	{0x0000a1e8, 0x00000000},
-	{0x0000a1ec, 0x00000000},
-	{0x0000a1f0, 0x00000396},
-	{0x0000a1f4, 0x00000396},
-	{0x0000a1f8, 0x00000396},
-	{0x0000a1fc, 0x00000196},
-	{0x0000b000, 0x00010000},
-	{0x0000b004, 0x00030002},
-	{0x0000b008, 0x00050004},
-	{0x0000b00c, 0x00810080},
-	{0x0000b010, 0x00830082},
-	{0x0000b014, 0x01810180},
-	{0x0000b018, 0x01830182},
-	{0x0000b01c, 0x01850184},
-	{0x0000b020, 0x02810280},
-	{0x0000b024, 0x02830282},
-	{0x0000b028, 0x02850284},
-	{0x0000b02c, 0x02890288},
-	{0x0000b030, 0x028b028a},
-	{0x0000b034, 0x0388028c},
-	{0x0000b038, 0x038a0389},
-	{0x0000b03c, 0x038c038b},
-	{0x0000b040, 0x0390038d},
-	{0x0000b044, 0x03920391},
-	{0x0000b048, 0x03940393},
-	{0x0000b04c, 0x03960395},
-	{0x0000b050, 0x00000000},
-	{0x0000b054, 0x00000000},
-	{0x0000b058, 0x00000000},
-	{0x0000b05c, 0x00000000},
-	{0x0000b060, 0x00000000},
-	{0x0000b064, 0x00000000},
-	{0x0000b068, 0x00000000},
-	{0x0000b06c, 0x00000000},
-	{0x0000b070, 0x00000000},
-	{0x0000b074, 0x00000000},
-	{0x0000b078, 0x00000000},
-	{0x0000b07c, 0x00000000},
-	{0x0000b080, 0x32323232},
-	{0x0000b084, 0x2f2f3232},
-	{0x0000b088, 0x23282a2d},
-	{0x0000b08c, 0x1c1e2123},
-	{0x0000b090, 0x14171919},
-	{0x0000b094, 0x0e0e1214},
-	{0x0000b098, 0x03050707},
-	{0x0000b09c, 0x00030303},
-	{0x0000b0a0, 0x00000000},
-	{0x0000b0a4, 0x00000000},
-	{0x0000b0a8, 0x00000000},
-	{0x0000b0ac, 0x00000000},
-	{0x0000b0b0, 0x00000000},
-	{0x0000b0b4, 0x00000000},
-	{0x0000b0b8, 0x00000000},
-	{0x0000b0bc, 0x00000000},
-	{0x0000b0c0, 0x003f0020},
-	{0x0000b0c4, 0x00400041},
-	{0x0000b0c8, 0x0140005f},
-	{0x0000b0cc, 0x0160015f},
-	{0x0000b0d0, 0x017e017f},
-	{0x0000b0d4, 0x02410242},
-	{0x0000b0d8, 0x025f0240},
-	{0x0000b0dc, 0x027f0260},
-	{0x0000b0e0, 0x0341027e},
-	{0x0000b0e4, 0x035f0340},
-	{0x0000b0e8, 0x037f0360},
-	{0x0000b0ec, 0x04400441},
-	{0x0000b0f0, 0x0460045f},
-	{0x0000b0f4, 0x0541047f},
-	{0x0000b0f8, 0x055f0540},
-	{0x0000b0fc, 0x057f0560},
-	{0x0000b100, 0x06400641},
-	{0x0000b104, 0x0660065f},
-	{0x0000b108, 0x067e067f},
-	{0x0000b10c, 0x07410742},
-	{0x0000b110, 0x075f0740},
-	{0x0000b114, 0x077f0760},
-	{0x0000b118, 0x07800781},
-	{0x0000b11c, 0x07a0079f},
-	{0x0000b120, 0x07c107bf},
-	{0x0000b124, 0x000007c0},
-	{0x0000b128, 0x00000000},
-	{0x0000b12c, 0x00000000},
-	{0x0000b130, 0x00000000},
-	{0x0000b134, 0x00000000},
-	{0x0000b138, 0x00000000},
-	{0x0000b13c, 0x00000000},
-	{0x0000b140, 0x003f0020},
-	{0x0000b144, 0x00400041},
-	{0x0000b148, 0x0140005f},
-	{0x0000b14c, 0x0160015f},
-	{0x0000b150, 0x017e017f},
-	{0x0000b154, 0x02410242},
-	{0x0000b158, 0x025f0240},
-	{0x0000b15c, 0x027f0260},
-	{0x0000b160, 0x0341027e},
-	{0x0000b164, 0x035f0340},
-	{0x0000b168, 0x037f0360},
-	{0x0000b16c, 0x04400441},
-	{0x0000b170, 0x0460045f},
-	{0x0000b174, 0x0541047f},
-	{0x0000b178, 0x055f0540},
-	{0x0000b17c, 0x057f0560},
-	{0x0000b180, 0x06400641},
-	{0x0000b184, 0x0660065f},
-	{0x0000b188, 0x067e067f},
-	{0x0000b18c, 0x07410742},
-	{0x0000b190, 0x075f0740},
-	{0x0000b194, 0x077f0760},
-	{0x0000b198, 0x07800781},
-	{0x0000b19c, 0x07a0079f},
-	{0x0000b1a0, 0x07c107bf},
-	{0x0000b1a4, 0x000007c0},
-	{0x0000b1a8, 0x00000000},
-	{0x0000b1ac, 0x00000000},
-	{0x0000b1b0, 0x00000000},
-	{0x0000b1b4, 0x00000000},
-	{0x0000b1b8, 0x00000000},
-	{0x0000b1bc, 0x00000000},
-	{0x0000b1c0, 0x00000000},
-	{0x0000b1c4, 0x00000000},
-	{0x0000b1c8, 0x00000000},
-	{0x0000b1cc, 0x00000000},
-	{0x0000b1d0, 0x00000000},
-	{0x0000b1d4, 0x00000000},
-	{0x0000b1d8, 0x00000000},
-	{0x0000b1dc, 0x00000000},
-	{0x0000b1e0, 0x00000000},
-	{0x0000b1e4, 0x00000000},
-	{0x0000b1e8, 0x00000000},
-	{0x0000b1ec, 0x00000000},
-	{0x0000b1f0, 0x00000396},
-	{0x0000b1f4, 0x00000396},
-	{0x0000b1f8, 0x00000396},
-	{0x0000b1fc, 0x00000196},
-};
+#define ar9580_1p0_wo_xlna_rx_gain_table ar9300Common_wo_xlna_rx_gain_table_2p2
 
-static const u32 ar9580_1p0_soc_postamble[][5] = {
-	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
-	{0x00007010, 0x00000023, 0x00000023, 0x00000023, 0x00000023},
-};
+#define ar9580_1p0_soc_postamble ar9300_2p2_soc_postamble
 
-static const u32 ar9580_1p0_high_ob_db_tx_gain_table[][5] = {
-	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
-	{0x0000a2dc, 0x01feee00, 0x01feee00, 0x03aaa352, 0x03aaa352},
-	{0x0000a2e0, 0x0000f000, 0x0000f000, 0x03ccc584, 0x03ccc584},
-	{0x0000a2e4, 0x01ff0000, 0x01ff0000, 0x03f0f800, 0x03f0f800},
-	{0x0000a2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
-	{0x0000a410, 0x000050d8, 0x000050d8, 0x000050d9, 0x000050d9},
-	{0x0000a500, 0x00002220, 0x00002220, 0x00000000, 0x00000000},
-	{0x0000a504, 0x04002222, 0x04002222, 0x04000002, 0x04000002},
-	{0x0000a508, 0x09002421, 0x09002421, 0x08000004, 0x08000004},
-	{0x0000a50c, 0x0d002621, 0x0d002621, 0x0b000200, 0x0b000200},
-	{0x0000a510, 0x13004620, 0x13004620, 0x0f000202, 0x0f000202},
-	{0x0000a514, 0x19004a20, 0x19004a20, 0x11000400, 0x11000400},
-	{0x0000a518, 0x1d004e20, 0x1d004e20, 0x15000402, 0x15000402},
-	{0x0000a51c, 0x21005420, 0x21005420, 0x19000404, 0x19000404},
-	{0x0000a520, 0x26005e20, 0x26005e20, 0x1b000603, 0x1b000603},
-	{0x0000a524, 0x2b005e40, 0x2b005e40, 0x1f000a02, 0x1f000a02},
-	{0x0000a528, 0x2f005e42, 0x2f005e42, 0x23000a04, 0x23000a04},
-	{0x0000a52c, 0x33005e44, 0x33005e44, 0x26000a20, 0x26000a20},
-	{0x0000a530, 0x38005e65, 0x38005e65, 0x2a000e20, 0x2a000e20},
-	{0x0000a534, 0x3c005e69, 0x3c005e69, 0x2e000e22, 0x2e000e22},
-	{0x0000a538, 0x40005e6b, 0x40005e6b, 0x31000e24, 0x31000e24},
-	{0x0000a53c, 0x44005e6d, 0x44005e6d, 0x34001640, 0x34001640},
-	{0x0000a540, 0x49005e72, 0x49005e72, 0x38001660, 0x38001660},
-	{0x0000a544, 0x4e005eb2, 0x4e005eb2, 0x3b001861, 0x3b001861},
-	{0x0000a548, 0x53005f12, 0x53005f12, 0x3e001a81, 0x3e001a81},
-	{0x0000a54c, 0x59025eb2, 0x59025eb2, 0x42001a83, 0x42001a83},
-	{0x0000a550, 0x5e025f12, 0x5e025f12, 0x44001c84, 0x44001c84},
-	{0x0000a554, 0x61027f12, 0x61027f12, 0x48001ce3, 0x48001ce3},
-	{0x0000a558, 0x6702bf12, 0x6702bf12, 0x4c001ce5, 0x4c001ce5},
-	{0x0000a55c, 0x6b02bf14, 0x6b02bf14, 0x50001ce9, 0x50001ce9},
-	{0x0000a560, 0x6f02bf16, 0x6f02bf16, 0x54001ceb, 0x54001ceb},
-	{0x0000a564, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
-	{0x0000a568, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
-	{0x0000a56c, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
-	{0x0000a570, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
-	{0x0000a574, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
-	{0x0000a578, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
-	{0x0000a57c, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
-	{0x0000a580, 0x00802220, 0x00802220, 0x00800000, 0x00800000},
-	{0x0000a584, 0x04802222, 0x04802222, 0x04800002, 0x04800002},
-	{0x0000a588, 0x09802421, 0x09802421, 0x08800004, 0x08800004},
-	{0x0000a58c, 0x0d802621, 0x0d802621, 0x0b800200, 0x0b800200},
-	{0x0000a590, 0x13804620, 0x13804620, 0x0f800202, 0x0f800202},
-	{0x0000a594, 0x19804a20, 0x19804a20, 0x11800400, 0x11800400},
-	{0x0000a598, 0x1d804e20, 0x1d804e20, 0x15800402, 0x15800402},
-	{0x0000a59c, 0x21805420, 0x21805420, 0x19800404, 0x19800404},
-	{0x0000a5a0, 0x26805e20, 0x26805e20, 0x1b800603, 0x1b800603},
-	{0x0000a5a4, 0x2b805e40, 0x2b805e40, 0x1f800a02, 0x1f800a02},
-	{0x0000a5a8, 0x2f805e42, 0x2f805e42, 0x23800a04, 0x23800a04},
-	{0x0000a5ac, 0x33805e44, 0x33805e44, 0x26800a20, 0x26800a20},
-	{0x0000a5b0, 0x38805e65, 0x38805e65, 0x2a800e20, 0x2a800e20},
-	{0x0000a5b4, 0x3c805e69, 0x3c805e69, 0x2e800e22, 0x2e800e22},
-	{0x0000a5b8, 0x40805e6b, 0x40805e6b, 0x31800e24, 0x31800e24},
-	{0x0000a5bc, 0x44805e6d, 0x44805e6d, 0x34801640, 0x34801640},
-	{0x0000a5c0, 0x49805e72, 0x49805e72, 0x38801660, 0x38801660},
-	{0x0000a5c4, 0x4e805eb2, 0x4e805eb2, 0x3b801861, 0x3b801861},
-	{0x0000a5c8, 0x53805f12, 0x53805f12, 0x3e801a81, 0x3e801a81},
-	{0x0000a5cc, 0x59825eb2, 0x59825eb2, 0x42801a83, 0x42801a83},
-	{0x0000a5d0, 0x5e825f12, 0x5e825f12, 0x44801c84, 0x44801c84},
-	{0x0000a5d4, 0x61827f12, 0x61827f12, 0x48801ce3, 0x48801ce3},
-	{0x0000a5d8, 0x6782bf12, 0x6782bf12, 0x4c801ce5, 0x4c801ce5},
-	{0x0000a5dc, 0x6b82bf14, 0x6b82bf14, 0x50801ce9, 0x50801ce9},
-	{0x0000a5e0, 0x6f82bf16, 0x6f82bf16, 0x54801ceb, 0x54801ceb},
-	{0x0000a5e4, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
-	{0x0000a5e8, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
-	{0x0000a5ec, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
-	{0x0000a5f0, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
-	{0x0000a5f4, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
-	{0x0000a5f8, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
-	{0x0000a5fc, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
-	{0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a60c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a610, 0x00804000, 0x00804000, 0x00000000, 0x00000000},
-	{0x0000a614, 0x00804201, 0x00804201, 0x01404000, 0x01404000},
-	{0x0000a618, 0x0280c802, 0x0280c802, 0x01404501, 0x01404501},
-	{0x0000a61c, 0x0280ca03, 0x0280ca03, 0x02008501, 0x02008501},
-	{0x0000a620, 0x04c15104, 0x04c15104, 0x0280ca03, 0x0280ca03},
-	{0x0000a624, 0x04c15305, 0x04c15305, 0x03010c04, 0x03010c04},
-	{0x0000a628, 0x04c15305, 0x04c15305, 0x04014c04, 0x04014c04},
-	{0x0000a62c, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
-	{0x0000a630, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
-	{0x0000a634, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
-	{0x0000a638, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
-	{0x0000a63c, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
-	{0x0000b2dc, 0x01feee00, 0x01feee00, 0x03aaa352, 0x03aaa352},
-	{0x0000b2e0, 0x0000f000, 0x0000f000, 0x03ccc584, 0x03ccc584},
-	{0x0000b2e4, 0x01ff0000, 0x01ff0000, 0x03f0f800, 0x03f0f800},
-	{0x0000b2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
-	{0x0000c2dc, 0x01feee00, 0x01feee00, 0x03aaa352, 0x03aaa352},
-	{0x0000c2e0, 0x0000f000, 0x0000f000, 0x03ccc584, 0x03ccc584},
-	{0x0000c2e4, 0x01ff0000, 0x01ff0000, 0x03f0f800, 0x03f0f800},
-	{0x0000c2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
-	{0x00016044, 0x056db2e4, 0x056db2e4, 0x056db2e4, 0x056db2e4},
-	{0x00016048, 0x8e480001, 0x8e480001, 0x8e480001, 0x8e480001},
-	{0x00016068, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c},
-	{0x00016444, 0x056db2e4, 0x056db2e4, 0x056db2e4, 0x056db2e4},
-	{0x00016448, 0x8e480001, 0x8e480001, 0x8e480001, 0x8e480001},
-	{0x00016468, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c},
-	{0x00016844, 0x056db2e4, 0x056db2e4, 0x056db2e4, 0x056db2e4},
-	{0x00016848, 0x8e480001, 0x8e480001, 0x8e480001, 0x8e480001},
-	{0x00016868, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c},
-};
+#define ar9580_1p0_high_ob_db_tx_gain_table ar9300Modes_high_ob_db_tx_gain_table_2p2
 
 static const u32 ar9580_1p0_soc_preamble[][2] = {
 	/* Addr      allmodes  */
@@ -1189,265 +695,7 @@ static const u32 ar9580_1p0_soc_preamble[][2] = {
 	{0x00007048, 0x00000008},
 };
 
-static const u32 ar9580_1p0_rx_gain_table[][2] = {
-	/* Addr      allmodes  */
-	{0x0000a000, 0x00010000},
-	{0x0000a004, 0x00030002},
-	{0x0000a008, 0x00050004},
-	{0x0000a00c, 0x00810080},
-	{0x0000a010, 0x00830082},
-	{0x0000a014, 0x01810180},
-	{0x0000a018, 0x01830182},
-	{0x0000a01c, 0x01850184},
-	{0x0000a020, 0x01890188},
-	{0x0000a024, 0x018b018a},
-	{0x0000a028, 0x018d018c},
-	{0x0000a02c, 0x01910190},
-	{0x0000a030, 0x01930192},
-	{0x0000a034, 0x01950194},
-	{0x0000a038, 0x038a0196},
-	{0x0000a03c, 0x038c038b},
-	{0x0000a040, 0x0390038d},
-	{0x0000a044, 0x03920391},
-	{0x0000a048, 0x03940393},
-	{0x0000a04c, 0x03960395},
-	{0x0000a050, 0x00000000},
-	{0x0000a054, 0x00000000},
-	{0x0000a058, 0x00000000},
-	{0x0000a05c, 0x00000000},
-	{0x0000a060, 0x00000000},
-	{0x0000a064, 0x00000000},
-	{0x0000a068, 0x00000000},
-	{0x0000a06c, 0x00000000},
-	{0x0000a070, 0x00000000},
-	{0x0000a074, 0x00000000},
-	{0x0000a078, 0x00000000},
-	{0x0000a07c, 0x00000000},
-	{0x0000a080, 0x22222229},
-	{0x0000a084, 0x1d1d1d1d},
-	{0x0000a088, 0x1d1d1d1d},
-	{0x0000a08c, 0x1d1d1d1d},
-	{0x0000a090, 0x171d1d1d},
-	{0x0000a094, 0x11111717},
-	{0x0000a098, 0x00030311},
-	{0x0000a09c, 0x00000000},
-	{0x0000a0a0, 0x00000000},
-	{0x0000a0a4, 0x00000000},
-	{0x0000a0a8, 0x00000000},
-	{0x0000a0ac, 0x00000000},
-	{0x0000a0b0, 0x00000000},
-	{0x0000a0b4, 0x00000000},
-	{0x0000a0b8, 0x00000000},
-	{0x0000a0bc, 0x00000000},
-	{0x0000a0c0, 0x001f0000},
-	{0x0000a0c4, 0x01000101},
-	{0x0000a0c8, 0x011e011f},
-	{0x0000a0cc, 0x011c011d},
-	{0x0000a0d0, 0x02030204},
-	{0x0000a0d4, 0x02010202},
-	{0x0000a0d8, 0x021f0200},
-	{0x0000a0dc, 0x0302021e},
-	{0x0000a0e0, 0x03000301},
-	{0x0000a0e4, 0x031e031f},
-	{0x0000a0e8, 0x0402031d},
-	{0x0000a0ec, 0x04000401},
-	{0x0000a0f0, 0x041e041f},
-	{0x0000a0f4, 0x0502041d},
-	{0x0000a0f8, 0x05000501},
-	{0x0000a0fc, 0x051e051f},
-	{0x0000a100, 0x06010602},
-	{0x0000a104, 0x061f0600},
-	{0x0000a108, 0x061d061e},
-	{0x0000a10c, 0x07020703},
-	{0x0000a110, 0x07000701},
-	{0x0000a114, 0x00000000},
-	{0x0000a118, 0x00000000},
-	{0x0000a11c, 0x00000000},
-	{0x0000a120, 0x00000000},
-	{0x0000a124, 0x00000000},
-	{0x0000a128, 0x00000000},
-	{0x0000a12c, 0x00000000},
-	{0x0000a130, 0x00000000},
-	{0x0000a134, 0x00000000},
-	{0x0000a138, 0x00000000},
-	{0x0000a13c, 0x00000000},
-	{0x0000a140, 0x001f0000},
-	{0x0000a144, 0x01000101},
-	{0x0000a148, 0x011e011f},
-	{0x0000a14c, 0x011c011d},
-	{0x0000a150, 0x02030204},
-	{0x0000a154, 0x02010202},
-	{0x0000a158, 0x021f0200},
-	{0x0000a15c, 0x0302021e},
-	{0x0000a160, 0x03000301},
-	{0x0000a164, 0x031e031f},
-	{0x0000a168, 0x0402031d},
-	{0x0000a16c, 0x04000401},
-	{0x0000a170, 0x041e041f},
-	{0x0000a174, 0x0502041d},
-	{0x0000a178, 0x05000501},
-	{0x0000a17c, 0x051e051f},
-	{0x0000a180, 0x06010602},
-	{0x0000a184, 0x061f0600},
-	{0x0000a188, 0x061d061e},
-	{0x0000a18c, 0x07020703},
-	{0x0000a190, 0x07000701},
-	{0x0000a194, 0x00000000},
-	{0x0000a198, 0x00000000},
-	{0x0000a19c, 0x00000000},
-	{0x0000a1a0, 0x00000000},
-	{0x0000a1a4, 0x00000000},
-	{0x0000a1a8, 0x00000000},
-	{0x0000a1ac, 0x00000000},
-	{0x0000a1b0, 0x00000000},
-	{0x0000a1b4, 0x00000000},
-	{0x0000a1b8, 0x00000000},
-	{0x0000a1bc, 0x00000000},
-	{0x0000a1c0, 0x00000000},
-	{0x0000a1c4, 0x00000000},
-	{0x0000a1c8, 0x00000000},
-	{0x0000a1cc, 0x00000000},
-	{0x0000a1d0, 0x00000000},
-	{0x0000a1d4, 0x00000000},
-	{0x0000a1d8, 0x00000000},
-	{0x0000a1dc, 0x00000000},
-	{0x0000a1e0, 0x00000000},
-	{0x0000a1e4, 0x00000000},
-	{0x0000a1e8, 0x00000000},
-	{0x0000a1ec, 0x00000000},
-	{0x0000a1f0, 0x00000396},
-	{0x0000a1f4, 0x00000396},
-	{0x0000a1f8, 0x00000396},
-	{0x0000a1fc, 0x00000196},
-	{0x0000b000, 0x00010000},
-	{0x0000b004, 0x00030002},
-	{0x0000b008, 0x00050004},
-	{0x0000b00c, 0x00810080},
-	{0x0000b010, 0x00830082},
-	{0x0000b014, 0x01810180},
-	{0x0000b018, 0x01830182},
-	{0x0000b01c, 0x01850184},
-	{0x0000b020, 0x02810280},
-	{0x0000b024, 0x02830282},
-	{0x0000b028, 0x02850284},
-	{0x0000b02c, 0x02890288},
-	{0x0000b030, 0x028b028a},
-	{0x0000b034, 0x0388028c},
-	{0x0000b038, 0x038a0389},
-	{0x0000b03c, 0x038c038b},
-	{0x0000b040, 0x0390038d},
-	{0x0000b044, 0x03920391},
-	{0x0000b048, 0x03940393},
-	{0x0000b04c, 0x03960395},
-	{0x0000b050, 0x00000000},
-	{0x0000b054, 0x00000000},
-	{0x0000b058, 0x00000000},
-	{0x0000b05c, 0x00000000},
-	{0x0000b060, 0x00000000},
-	{0x0000b064, 0x00000000},
-	{0x0000b068, 0x00000000},
-	{0x0000b06c, 0x00000000},
-	{0x0000b070, 0x00000000},
-	{0x0000b074, 0x00000000},
-	{0x0000b078, 0x00000000},
-	{0x0000b07c, 0x00000000},
-	{0x0000b080, 0x2a2d2f32},
-	{0x0000b084, 0x21232328},
-	{0x0000b088, 0x19191c1e},
-	{0x0000b08c, 0x12141417},
-	{0x0000b090, 0x07070e0e},
-	{0x0000b094, 0x03030305},
-	{0x0000b098, 0x00000003},
-	{0x0000b09c, 0x00000000},
-	{0x0000b0a0, 0x00000000},
-	{0x0000b0a4, 0x00000000},
-	{0x0000b0a8, 0x00000000},
-	{0x0000b0ac, 0x00000000},
-	{0x0000b0b0, 0x00000000},
-	{0x0000b0b4, 0x00000000},
-	{0x0000b0b8, 0x00000000},
-	{0x0000b0bc, 0x00000000},
-	{0x0000b0c0, 0x003f0020},
-	{0x0000b0c4, 0x00400041},
-	{0x0000b0c8, 0x0140005f},
-	{0x0000b0cc, 0x0160015f},
-	{0x0000b0d0, 0x017e017f},
-	{0x0000b0d4, 0x02410242},
-	{0x0000b0d8, 0x025f0240},
-	{0x0000b0dc, 0x027f0260},
-	{0x0000b0e0, 0x0341027e},
-	{0x0000b0e4, 0x035f0340},
-	{0x0000b0e8, 0x037f0360},
-	{0x0000b0ec, 0x04400441},
-	{0x0000b0f0, 0x0460045f},
-	{0x0000b0f4, 0x0541047f},
-	{0x0000b0f8, 0x055f0540},
-	{0x0000b0fc, 0x057f0560},
-	{0x0000b100, 0x06400641},
-	{0x0000b104, 0x0660065f},
-	{0x0000b108, 0x067e067f},
-	{0x0000b10c, 0x07410742},
-	{0x0000b110, 0x075f0740},
-	{0x0000b114, 0x077f0760},
-	{0x0000b118, 0x07800781},
-	{0x0000b11c, 0x07a0079f},
-	{0x0000b120, 0x07c107bf},
-	{0x0000b124, 0x000007c0},
-	{0x0000b128, 0x00000000},
-	{0x0000b12c, 0x00000000},
-	{0x0000b130, 0x00000000},
-	{0x0000b134, 0x00000000},
-	{0x0000b138, 0x00000000},
-	{0x0000b13c, 0x00000000},
-	{0x0000b140, 0x003f0020},
-	{0x0000b144, 0x00400041},
-	{0x0000b148, 0x0140005f},
-	{0x0000b14c, 0x0160015f},
-	{0x0000b150, 0x017e017f},
-	{0x0000b154, 0x02410242},
-	{0x0000b158, 0x025f0240},
-	{0x0000b15c, 0x027f0260},
-	{0x0000b160, 0x0341027e},
-	{0x0000b164, 0x035f0340},
-	{0x0000b168, 0x037f0360},
-	{0x0000b16c, 0x04400441},
-	{0x0000b170, 0x0460045f},
-	{0x0000b174, 0x0541047f},
-	{0x0000b178, 0x055f0540},
-	{0x0000b17c, 0x057f0560},
-	{0x0000b180, 0x06400641},
-	{0x0000b184, 0x0660065f},
-	{0x0000b188, 0x067e067f},
-	{0x0000b18c, 0x07410742},
-	{0x0000b190, 0x075f0740},
-	{0x0000b194, 0x077f0760},
-	{0x0000b198, 0x07800781},
-	{0x0000b19c, 0x07a0079f},
-	{0x0000b1a0, 0x07c107bf},
-	{0x0000b1a4, 0x000007c0},
-	{0x0000b1a8, 0x00000000},
-	{0x0000b1ac, 0x00000000},
-	{0x0000b1b0, 0x00000000},
-	{0x0000b1b4, 0x00000000},
-	{0x0000b1b8, 0x00000000},
-	{0x0000b1bc, 0x00000000},
-	{0x0000b1c0, 0x00000000},
-	{0x0000b1c4, 0x00000000},
-	{0x0000b1c8, 0x00000000},
-	{0x0000b1cc, 0x00000000},
-	{0x0000b1d0, 0x00000000},
-	{0x0000b1d4, 0x00000000},
-	{0x0000b1d8, 0x00000000},
-	{0x0000b1dc, 0x00000000},
-	{0x0000b1e0, 0x00000000},
-	{0x0000b1e4, 0x00000000},
-	{0x0000b1e8, 0x00000000},
-	{0x0000b1ec, 0x00000000},
-	{0x0000b1f0, 0x00000396},
-	{0x0000b1f4, 0x00000396},
-	{0x0000b1f8, 0x00000396},
-	{0x0000b1fc, 0x00000196},
-};
+#define ar9580_1p0_rx_gain_table ar9462_common_rx_gain_table_2p0
 
 static const u32 ar9580_1p0_radio_core[][2] = {
 	/* Addr      allmodes  */
-- 
cgit v1.1


From 1a1fb970472d66d1668ff66bc46c2cd977f9a4fc Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Wed, 27 Jun 2012 19:57:56 -0700
Subject: mwifiex: wakeup main thread to handle command queued

We miss to wakeup main thread after adding command to cmd pending
queue at follwing places. These commands are handled later when
main thread is woken up for handling an interrupt for sleep event
from firmware. This adds worst case delay of 50msec.

1) We don't wakeup main thread when asynchronous command is added
to cmd pending queue. Move queue_work() call from
mwifiex_wait_queue_complete() to mwifiex_send_cmd_async() to wakeup
main thread for sync as well as async commands.

2) Scan operation is triggered due to following reasons
   a) request from user (ex. "iw scan" command)
   b) Scan performed by driver internally.
   In first case main thread is woken up when first scan command is
queued in cmd pending queue (we don't need to wakeup main thread for
subsequent scan commands, because they are queued in scan command
response handler), but it is not done for second case. queue_work()
is moved inside mwifiex_scan_networks() to handle both the cases.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cfg80211.c  |  2 +-
 drivers/net/wireless/mwifiex/cmdevt.c    |  1 +
 drivers/net/wireless/mwifiex/main.h      |  4 ++--
 drivers/net/wireless/mwifiex/scan.c      | 25 +++----------------------
 drivers/net/wireless/mwifiex/sta_ioctl.c |  3 ---
 5 files changed, 7 insertions(+), 28 deletions(-)

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 9c2e08e..02d0ee8 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -1422,7 +1422,7 @@ mwifiex_cfg80211_scan(struct wiphy *wiphy, struct net_device *dev,
 
 		priv->user_scan_cfg->chan_list[i].scan_time = 0;
 	}
-	if (mwifiex_set_user_scan_ioctl(priv, priv->user_scan_cfg))
+	if (mwifiex_scan_networks(priv, priv->user_scan_cfg))
 		return -EFAULT;
 
 	if (request->ie && request->ie_len) {
diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index ea37b88..c68adec 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -578,6 +578,7 @@ int mwifiex_send_cmd_async(struct mwifiex_private *priv, uint16_t cmd_no,
 	} else {
 		adapter->cmd_queued = cmd_node;
 		mwifiex_insert_cmd_to_pending_q(adapter, cmd_node, true);
+		queue_work(adapter->workqueue, &adapter->main_work);
 	}
 
 	return ret;
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 0b3b5aa..7cd95cc 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -949,8 +949,8 @@ int mwifiex_drv_get_data_rate(struct mwifiex_private *priv,
 			      struct mwifiex_rate_cfg *rate);
 int mwifiex_request_scan(struct mwifiex_private *priv,
 			 struct cfg80211_ssid *req_ssid);
-int mwifiex_set_user_scan_ioctl(struct mwifiex_private *priv,
-				struct mwifiex_user_scan_cfg *scan_req);
+int mwifiex_scan_networks(struct mwifiex_private *priv,
+			  const struct mwifiex_user_scan_cfg *user_scan_in);
 int mwifiex_set_radio(struct mwifiex_private *priv, u8 option);
 
 int mwifiex_drv_change_adhoc_chan(struct mwifiex_private *priv, u16 channel);
diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c
index efaf26c..884ed63 100644
--- a/drivers/net/wireless/mwifiex/scan.c
+++ b/drivers/net/wireless/mwifiex/scan.c
@@ -1296,8 +1296,8 @@ mwifiex_radio_type_to_band(u8 radio_type)
  * order to send the appropriate scan commands to firmware to populate or
  * update the internal driver scan table.
  */
-static int mwifiex_scan_networks(struct mwifiex_private *priv,
-		const struct mwifiex_user_scan_cfg *user_scan_in)
+int mwifiex_scan_networks(struct mwifiex_private *priv,
+			  const struct mwifiex_user_scan_cfg *user_scan_in)
 {
 	int ret = 0;
 	struct mwifiex_adapter *adapter = priv->adapter;
@@ -1362,6 +1362,7 @@ static int mwifiex_scan_networks(struct mwifiex_private *priv,
 			adapter->cmd_queued = cmd_node;
 			mwifiex_insert_cmd_to_pending_q(adapter, cmd_node,
 							true);
+			queue_work(adapter->workqueue, &adapter->main_work);
 		} else {
 			spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
 					       flags);
@@ -1378,26 +1379,6 @@ static int mwifiex_scan_networks(struct mwifiex_private *priv,
 }
 
 /*
- * Sends IOCTL request to start a scan with user configurations.
- *
- * This function allocates the IOCTL request buffer, fills it
- * with requisite parameters and calls the IOCTL handler.
- *
- * Upon completion, it also generates a wireless event to notify
- * applications.
- */
-int mwifiex_set_user_scan_ioctl(struct mwifiex_private *priv,
-				struct mwifiex_user_scan_cfg *scan_req)
-{
-	int status;
-
-	status = mwifiex_scan_networks(priv, scan_req);
-	queue_work(priv->adapter->workqueue, &priv->adapter->main_work);
-
-	return status;
-}
-
-/*
  * This function prepares a scan command to be sent to the firmware.
  *
  * This uses the scan command configuration sent to the command processing
diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c
index 106c449..f2fd242 100644
--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -66,9 +66,6 @@ int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter)
 	dev_dbg(adapter->dev, "cmd pending\n");
 	atomic_inc(&adapter->cmd_pending);
 
-	/* Status pending, wake up main process */
-	queue_work(adapter->workqueue, &adapter->main_work);
-
 	/* Wait for completion */
 	wait_event_interruptible(adapter->cmd_wait_q.wait,
 				 *(cmd_queued->condition));
-- 
cgit v1.1


From caa8984f59b8be220767886ae27de855f77e6a61 Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Wed, 27 Jun 2012 19:57:57 -0700
Subject: mwifiex: use correct firmware command to get power limits

"priv->max_tx_power_level" and "priv->min_tx_power_level" variables
are initialized to maximum and minimum power levels supported by
hardware by sending correct firmware command.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/fw.h          |  9 +++++++++
 drivers/net/wireless/mwifiex/sta_cmd.c     | 23 ++++++++++++++++++++++-
 drivers/net/wireless/mwifiex/sta_cmdresp.c | 27 +++++++++++++++++++++++++++
 3 files changed, 58 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 1184141..ffb6cdf 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -226,6 +226,7 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
 #define HostCmd_CMD_RF_REG_ACCESS                     0x001b
 #define HostCmd_CMD_PMIC_REG_ACCESS                   0x00ad
 #define HostCmd_CMD_802_11_RF_CHANNEL                 0x001d
+#define HostCmd_CMD_RF_TX_PWR                         0x001e
 #define HostCmd_CMD_802_11_DEAUTHENTICATE             0x0024
 #define HostCmd_CMD_MAC_CONTROL                       0x0028
 #define HostCmd_CMD_802_11_AD_HOC_START               0x002b
@@ -876,6 +877,13 @@ struct host_cmd_ds_txpwr_cfg {
 	__le32 mode;
 } __packed;
 
+struct host_cmd_ds_rf_tx_pwr {
+	__le16 action;
+	__le16 cur_level;
+	u8 max_power;
+	u8 min_power;
+} __packed;
+
 struct mwifiex_bcn_param {
 	u8 bssid[ETH_ALEN];
 	u8 rssi;
@@ -1361,6 +1369,7 @@ struct host_cmd_ds_command {
 		struct host_cmd_ds_tx_rate_query tx_rate;
 		struct host_cmd_ds_tx_rate_cfg tx_rate_cfg;
 		struct host_cmd_ds_txpwr_cfg txp_cfg;
+		struct host_cmd_ds_rf_tx_pwr txp;
 		struct host_cmd_ds_802_11_ps_mode_enh psmode_enh;
 		struct host_cmd_ds_802_11_hs_cfg_enh opt_hs_cfg;
 		struct host_cmd_ds_802_11_scan scan;
diff --git a/drivers/net/wireless/mwifiex/sta_cmd.c b/drivers/net/wireless/mwifiex/sta_cmd.c
index 40e025d..2d4319a 100644
--- a/drivers/net/wireless/mwifiex/sta_cmd.c
+++ b/drivers/net/wireless/mwifiex/sta_cmd.c
@@ -260,6 +260,23 @@ static int mwifiex_cmd_tx_power_cfg(struct host_cmd_ds_command *cmd,
 }
 
 /*
+ * This function prepares command to get RF Tx power.
+ */
+static int mwifiex_cmd_rf_tx_power(struct mwifiex_private *priv,
+				   struct host_cmd_ds_command *cmd,
+				   u16 cmd_action, void *data_buf)
+{
+	struct host_cmd_ds_rf_tx_pwr *txp = &cmd->params.txp;
+
+	cmd->size = cpu_to_le16(sizeof(struct host_cmd_ds_rf_tx_pwr)
+				+ S_DS_GEN);
+	cmd->command = cpu_to_le16(HostCmd_CMD_RF_TX_PWR);
+	txp->action = cpu_to_le16(cmd_action);
+
+	return 0;
+}
+
+/*
  * This function prepares command to set Host Sleep configuration.
  *
  * Preparation includes -
@@ -1055,6 +1072,10 @@ int mwifiex_sta_prepare_cmd(struct mwifiex_private *priv, uint16_t cmd_no,
 		ret = mwifiex_cmd_tx_power_cfg(cmd_ptr, cmd_action,
 					       data_buf);
 		break;
+	case HostCmd_CMD_RF_TX_PWR:
+		ret = mwifiex_cmd_rf_tx_power(priv, cmd_ptr, cmd_action,
+					      data_buf);
+		break;
 	case HostCmd_CMD_802_11_PS_MODE_ENH:
 		ret = mwifiex_cmd_enh_power_mode(priv, cmd_ptr, cmd_action,
 						 (uint16_t)cmd_oid, data_buf);
@@ -1283,7 +1304,7 @@ int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8 first_sta)
 	priv->data_rate = 0;
 
 	/* get tx power */
-	ret = mwifiex_send_cmd_async(priv, HostCmd_CMD_TXPWR_CFG,
+	ret = mwifiex_send_cmd_async(priv, HostCmd_CMD_RF_TX_PWR,
 				     HostCmd_ACT_GEN_GET, 0, NULL);
 	if (ret)
 		return -1;
diff --git a/drivers/net/wireless/mwifiex/sta_cmdresp.c b/drivers/net/wireless/mwifiex/sta_cmdresp.c
index a79ed9b..4cb2c1c 100644
--- a/drivers/net/wireless/mwifiex/sta_cmdresp.c
+++ b/drivers/net/wireless/mwifiex/sta_cmdresp.c
@@ -451,6 +451,30 @@ static int mwifiex_ret_tx_power_cfg(struct mwifiex_private *priv,
 }
 
 /*
+ * This function handles the command response of get RF Tx power.
+ */
+static int mwifiex_ret_rf_tx_power(struct mwifiex_private *priv,
+				   struct host_cmd_ds_command *resp)
+{
+	struct host_cmd_ds_rf_tx_pwr *txp = &resp->params.txp;
+	u16 action = le16_to_cpu(txp->action);
+
+	priv->tx_power_level = le16_to_cpu(txp->cur_level);
+
+	if (action == HostCmd_ACT_GEN_GET) {
+		priv->max_tx_power_level = txp->max_power;
+		priv->min_tx_power_level = txp->min_power;
+	}
+
+	dev_dbg(priv->adapter->dev,
+		"Current TxPower Level=%d, Max Power=%d, Min Power=%d\n",
+		priv->tx_power_level, priv->max_tx_power_level,
+		priv->min_tx_power_level);
+
+	return 0;
+}
+
+/*
  * This function handles the command response of set/get MAC address.
  *
  * Handling includes saving the MAC address in driver.
@@ -847,6 +871,9 @@ int mwifiex_process_sta_cmdresp(struct mwifiex_private *priv, u16 cmdresp_no,
 	case HostCmd_CMD_TXPWR_CFG:
 		ret = mwifiex_ret_tx_power_cfg(priv, resp);
 		break;
+	case HostCmd_CMD_RF_TX_PWR:
+		ret = mwifiex_ret_rf_tx_power(priv, resp);
+		break;
 	case HostCmd_CMD_802_11_PS_MODE_ENH:
 		ret = mwifiex_ret_enh_power_mode(priv, resp, data_buf);
 		break;
-- 
cgit v1.1


From 2041d7dff287333036145ba3aab57e3b675babef Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Wed, 27 Jun 2012 19:57:58 -0700
Subject: mwifiex: do not advertise custom regulatory domain capability

Since we don't support custom regulatory domains,
WIPHY_FLAG_CUSTOM_REGULATORY should not be enabled during wiphy
registration.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cfg80211.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 02d0ee8..cf97c2a 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -1746,7 +1746,7 @@ int mwifiex_register_cfg80211(struct mwifiex_adapter *adapter)
 
 	memcpy(wiphy->perm_addr, priv->curr_addr, ETH_ALEN);
 	wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
-	wiphy->flags |= WIPHY_FLAG_HAVE_AP_SME | WIPHY_FLAG_CUSTOM_REGULATORY;
+	wiphy->flags |= WIPHY_FLAG_HAVE_AP_SME;
 
 	/* Reserve space for mwifiex specific private data for BSS */
 	wiphy->bss_priv_size = sizeof(struct mwifiex_bss_priv);
-- 
cgit v1.1


From 34202e28fe7fc8551313f9a035a8857db83de757 Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Wed, 27 Jun 2012 19:57:59 -0700
Subject: mwifiex: retrieve correct max_power information in reg_notifier
 handler

As we don't provide custom regulatory rules to cfg80211,
"chan->max_power" remains uninitialized (0dbm) and
"chan->max_reg_power" will contain maximum power for a channel
extracted from regulatory rules provided by CRDA; hence use
"chan->max_reg_power" in reg_notifier handler instead of
"chan->max_power" to set max_power in firmware.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/mwifiex/cfg80211.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index cf97c2a..bb06d2e 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -260,13 +260,13 @@ static int mwifiex_send_domain_info_cmd_fw(struct wiphy *wiphy)
 			flag = 1;
 			first_chan = (u32) ch->hw_value;
 			next_chan = first_chan;
-			max_pwr = ch->max_power;
+			max_pwr = ch->max_reg_power;
 			no_of_parsed_chan = 1;
 			continue;
 		}
 
 		if (ch->hw_value == next_chan + 1 &&
-		    ch->max_power == max_pwr) {
+		    ch->max_reg_power == max_pwr) {
 			next_chan++;
 			no_of_parsed_chan++;
 		} else {
@@ -277,7 +277,7 @@ static int mwifiex_send_domain_info_cmd_fw(struct wiphy *wiphy)
 			no_of_triplet++;
 			first_chan = (u32) ch->hw_value;
 			next_chan = first_chan;
-			max_pwr = ch->max_power;
+			max_pwr = ch->max_reg_power;
 			no_of_parsed_chan = 1;
 		}
 	}
-- 
cgit v1.1